[PATCH] zd1211rw: Defer firmware load until first ifup
While playing with the firmware a while back, I discovered a way to
access the device's entire address space before the firmware has been
loaded.
Previously we were loading the firmware early on (during probe) so that
we could read the MAC address from the EEPROM and register a netdevice.
Now that we can read the EEPROM without having firmware, we can defer
firmware loading until later while still reading the MAC address early
on.
This has the advantage that zd1211rw can now be built into the kernel --
previously if this was the case, zd1211rw would be loaded before the
filesystem is available and firmware loading would fail.
Firmware load and other device initialization operations now happen the
first time the interface is brought up.
Some architectural changes were needed: handling of the is_zd1211b flag
was moved into the zd_usb structure, MAC address handling was obviously
changed, and a preinit_hw stage was added (the order is now: init,
preinit_hw, init_hw).
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 180dbcb..a1a5474 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -196,26 +196,27 @@
return le16_to_cpu(p[offset]);
}
-static char *get_fw_name(char *buffer, size_t size, u8 device_type,
+static char *get_fw_name(struct zd_usb *usb, char *buffer, size_t size,
const char* postfix)
{
scnprintf(buffer, size, "%s%s",
- device_type == DEVICE_ZD1211B ?
+ usb->is_zd1211b ?
FW_ZD1211B_PREFIX : FW_ZD1211_PREFIX,
postfix);
return buffer;
}
-static int handle_version_mismatch(struct usb_device *udev, u8 device_type,
+static int handle_version_mismatch(struct zd_usb *usb,
const struct firmware *ub_fw)
{
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
const struct firmware *ur_fw = NULL;
int offset;
int r = 0;
char fw_name[128];
r = request_fw_file(&ur_fw,
- get_fw_name(fw_name, sizeof(fw_name), device_type, "ur"),
+ get_fw_name(usb, fw_name, sizeof(fw_name), "ur"),
&udev->dev);
if (r)
goto error;
@@ -238,11 +239,12 @@
return r;
}
-static int upload_firmware(struct usb_device *udev, u8 device_type)
+static int upload_firmware(struct zd_usb *usb)
{
int r;
u16 fw_bcdDevice;
u16 bcdDevice;
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
const struct firmware *ub_fw = NULL;
const struct firmware *uph_fw = NULL;
char fw_name[128];
@@ -250,7 +252,7 @@
bcdDevice = get_bcdDevice(udev);
r = request_fw_file(&ub_fw,
- get_fw_name(fw_name, sizeof(fw_name), device_type, "ub"),
+ get_fw_name(usb, fw_name, sizeof(fw_name), "ub"),
&udev->dev);
if (r)
goto error;
@@ -265,7 +267,7 @@
dev_warn(&udev->dev, "device has old bootcode, please "
"report success or failure\n");
- r = handle_version_mismatch(udev, device_type, ub_fw);
+ r = handle_version_mismatch(usb, ub_fw);
if (r)
goto error;
} else {
@@ -276,7 +278,7 @@
r = request_fw_file(&uph_fw,
- get_fw_name(fw_name, sizeof(fw_name), device_type, "uphr"),
+ get_fw_name(usb, fw_name, sizeof(fw_name), "uphr"),
&udev->dev);
if (r)
goto error;
@@ -295,6 +297,30 @@
return r;
}
+/* Read data from device address space using "firmware interface" which does
+ * not require firmware to be loaded. */
+int zd_usb_read_fw(struct zd_usb *usb, zd_addr_t addr, u8 *data, u16 len)
+{
+ int r;
+ struct usb_device *udev = zd_usb_to_usbdev(usb);
+
+ r = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ USB_REQ_FIRMWARE_READ_DATA, USB_DIR_IN | 0x40, addr, 0,
+ data, len, 5000);
+ if (r < 0) {
+ dev_err(&udev->dev,
+ "read over firmware interface failed: %d\n", r);
+ return r;
+ } else if (r != len) {
+ dev_err(&udev->dev,
+ "incomplete read over firmware interface: %d/%d\n",
+ r, len);
+ return -EIO;
+ }
+
+ return 0;
+}
+
#define urb_dev(urb) (&(urb)->dev->dev)
static inline void handle_regs_int(struct urb *urb)
@@ -921,9 +947,42 @@
return 0;
}
+int zd_usb_init_hw(struct zd_usb *usb)
+{
+ int r;
+ struct zd_mac *mac = zd_usb_to_mac(usb);
+
+ dev_dbg_f(zd_usb_dev(usb), "\n");
+
+ r = upload_firmware(usb);
+ if (r) {
+ dev_err(zd_usb_dev(usb),
+ "couldn't load firmware. Error number %d\n", r);
+ return r;
+ }
+
+ r = usb_reset_configuration(zd_usb_to_usbdev(usb));
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "couldn't reset configuration. Error number %d\n", r);
+ return r;
+ }
+
+ r = zd_mac_init_hw(mac);
+ if (r) {
+ dev_dbg_f(zd_usb_dev(usb),
+ "couldn't initialize mac. Error number %d\n", r);
+ return r;
+ }
+
+ usb->initialized = 1;
+ return 0;
+}
+
static int probe(struct usb_interface *intf, const struct usb_device_id *id)
{
int r;
+ struct zd_usb *usb;
struct usb_device *udev = interface_to_usbdev(intf);
struct net_device *netdev = NULL;
@@ -951,26 +1010,10 @@
goto error;
}
- r = upload_firmware(udev, id->driver_info);
- if (r) {
- dev_err(&intf->dev,
- "couldn't load firmware. Error number %d\n", r);
- goto error;
- }
+ usb = &zd_netdev_mac(netdev)->chip.usb;
+ usb->is_zd1211b = (id->driver_info == DEVICE_ZD1211B) != 0;
- r = usb_reset_configuration(udev);
- if (r) {
- dev_dbg_f(&intf->dev,
- "couldn't reset configuration. Error number %d\n", r);
- goto error;
- }
-
- /* At this point the interrupt endpoint is not generally enabled. We
- * save the USB bandwidth until the network device is opened. But
- * notify that the initialization of the MAC will require the
- * interrupts to be temporary enabled.
- */
- r = zd_mac_init_hw(zd_netdev_mac(netdev), id->driver_info);
+ r = zd_mac_preinit_hw(zd_netdev_mac(netdev));
if (r) {
dev_dbg_f(&intf->dev,
"couldn't initialize mac. Error number %d\n", r);