| /* |
| * File...........: arch/s390/mm/extmem.c |
| * Author(s)......: Carsten Otte <cotte@de.ibm.com> |
| * Rob M van der Heij <rvdheij@nl.ibm.com> |
| * Steven Shultz <shultzss@us.ibm.com> |
| * Bugreports.to..: <Linux390@de.ibm.com> |
| * (C) IBM Corporation 2002-2004 |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/spinlock.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/bootmem.h> |
| #include <linux/ctype.h> |
| #include <linux/ioport.h> |
| #include <asm/page.h> |
| #include <asm/pgtable.h> |
| #include <asm/ebcdic.h> |
| #include <asm/errno.h> |
| #include <asm/extmem.h> |
| #include <asm/cpcmd.h> |
| #include <asm/setup.h> |
| |
| #define DCSS_DEBUG /* Debug messages on/off */ |
| |
| #define DCSS_NAME "extmem" |
| #ifdef DCSS_DEBUG |
| #define PRINT_DEBUG(x...) printk(KERN_DEBUG DCSS_NAME " debug:" x) |
| #else |
| #define PRINT_DEBUG(x...) do {} while (0) |
| #endif |
| #define PRINT_INFO(x...) printk(KERN_INFO DCSS_NAME " info:" x) |
| #define PRINT_WARN(x...) printk(KERN_WARNING DCSS_NAME " warning:" x) |
| #define PRINT_ERR(x...) printk(KERN_ERR DCSS_NAME " error:" x) |
| |
| |
| #define DCSS_LOADSHR 0x00 |
| #define DCSS_LOADNSR 0x04 |
| #define DCSS_PURGESEG 0x08 |
| #define DCSS_FINDSEG 0x0c |
| #define DCSS_LOADNOLY 0x10 |
| #define DCSS_SEGEXT 0x18 |
| #define DCSS_FINDSEGA 0x0c |
| |
| struct qrange { |
| unsigned int start; // 3byte start address, 1 byte type |
| unsigned int end; // 3byte end address, 1 byte reserved |
| }; |
| |
| struct qout64 { |
| int segstart; |
| int segend; |
| int segcnt; |
| int segrcnt; |
| struct qrange range[6]; |
| }; |
| |
| struct qin64 { |
| char qopcode; |
| char rsrv1[3]; |
| char qrcode; |
| char rsrv2[3]; |
| char qname[8]; |
| unsigned int qoutptr; |
| short int qoutlen; |
| }; |
| |
| struct dcss_segment { |
| struct list_head list; |
| char dcss_name[8]; |
| char res_name[15]; |
| unsigned long start_addr; |
| unsigned long end; |
| atomic_t ref_count; |
| int do_nonshared; |
| unsigned int vm_segtype; |
| struct qrange range[6]; |
| int segcnt; |
| struct resource *res; |
| }; |
| |
| static DEFINE_MUTEX(dcss_lock); |
| static LIST_HEAD(dcss_list); |
| static char *segtype_string[] = { "SW", "EW", "SR", "ER", "SN", "EN", "SC", |
| "EW/EN-MIXED" }; |
| |
| /* |
| * Create the 8 bytes, ebcdic VM segment name from |
| * an ascii name. |
| */ |
| static void |
| dcss_mkname(char *name, char *dcss_name) |
| { |
| int i; |
| |
| for (i = 0; i < 8; i++) { |
| if (name[i] == '\0') |
| break; |
| dcss_name[i] = toupper(name[i]); |
| }; |
| for (; i < 8; i++) |
| dcss_name[i] = ' '; |
| ASCEBC(dcss_name, 8); |
| } |
| |
| |
| /* |
| * search all segments in dcss_list, and return the one |
| * namend *name. If not found, return NULL. |
| */ |
| static struct dcss_segment * |
| segment_by_name (char *name) |
| { |
| char dcss_name[9]; |
| struct list_head *l; |
| struct dcss_segment *tmp, *retval = NULL; |
| |
| BUG_ON(!mutex_is_locked(&dcss_lock)); |
| dcss_mkname (name, dcss_name); |
| list_for_each (l, &dcss_list) { |
| tmp = list_entry (l, struct dcss_segment, list); |
| if (memcmp(tmp->dcss_name, dcss_name, 8) == 0) { |
| retval = tmp; |
| break; |
| } |
| } |
| return retval; |
| } |
| |
| |
| /* |
| * Perform a function on a dcss segment. |
| */ |
| static inline int |
| dcss_diag (__u8 func, void *parameter, |
| unsigned long *ret1, unsigned long *ret2) |
| { |
| unsigned long rx, ry; |
| int rc; |
| |
| rx = (unsigned long) parameter; |
| ry = (unsigned long) func; |
| asm volatile( |
| #ifdef CONFIG_64BIT |
| " sam31\n" |
| " diag %0,%1,0x64\n" |
| " sam64\n" |
| #else |
| " diag %0,%1,0x64\n" |
| #endif |
| " ipm %2\n" |
| " srl %2,28\n" |
| : "+d" (rx), "+d" (ry), "=d" (rc) : : "cc"); |
| *ret1 = rx; |
| *ret2 = ry; |
| return rc; |
| } |
| |
| static inline int |
| dcss_diag_translate_rc (int vm_rc) { |
| if (vm_rc == 44) |
| return -ENOENT; |
| return -EIO; |
| } |
| |
| |
| /* do a diag to get info about a segment. |
| * fills start_address, end and vm_segtype fields |
| */ |
| static int |
| query_segment_type (struct dcss_segment *seg) |
| { |
| struct qin64 *qin = kmalloc (sizeof(struct qin64), GFP_DMA); |
| struct qout64 *qout = kmalloc (sizeof(struct qout64), GFP_DMA); |
| |
| int diag_cc, rc, i; |
| unsigned long dummy, vmrc; |
| |
| if ((qin == NULL) || (qout == NULL)) { |
| rc = -ENOMEM; |
| goto out_free; |
| } |
| |
| /* initialize diag input parameters */ |
| qin->qopcode = DCSS_FINDSEGA; |
| qin->qoutptr = (unsigned long) qout; |
| qin->qoutlen = sizeof(struct qout64); |
| memcpy (qin->qname, seg->dcss_name, 8); |
| |
| diag_cc = dcss_diag (DCSS_SEGEXT, qin, &dummy, &vmrc); |
| |
| if (diag_cc > 1) { |
| PRINT_WARN ("segment_type: diag returned error %ld\n", vmrc); |
| rc = dcss_diag_translate_rc (vmrc); |
| goto out_free; |
| } |
| |
| if (qout->segcnt > 6) { |
| rc = -ENOTSUPP; |
| goto out_free; |
| } |
| |
| if (qout->segcnt == 1) { |
| seg->vm_segtype = qout->range[0].start & 0xff; |
| } else { |
| /* multi-part segment. only one type supported here: |
| - all parts are contiguous |
| - all parts are either EW or EN type |
| - maximum 6 parts allowed */ |
| unsigned long start = qout->segstart >> PAGE_SHIFT; |
| for (i=0; i<qout->segcnt; i++) { |
| if (((qout->range[i].start & 0xff) != SEG_TYPE_EW) && |
| ((qout->range[i].start & 0xff) != SEG_TYPE_EN)) { |
| rc = -ENOTSUPP; |
| goto out_free; |
| } |
| if (start != qout->range[i].start >> PAGE_SHIFT) { |
| rc = -ENOTSUPP; |
| goto out_free; |
| } |
| start = (qout->range[i].end >> PAGE_SHIFT) + 1; |
| } |
| seg->vm_segtype = SEG_TYPE_EWEN; |
| } |
| |
| /* analyze diag output and update seg */ |
| seg->start_addr = qout->segstart; |
| seg->end = qout->segend; |
| |
| memcpy (seg->range, qout->range, 6*sizeof(struct qrange)); |
| seg->segcnt = qout->segcnt; |
| |
| rc = 0; |
| |
| out_free: |
| kfree(qin); |
| kfree(qout); |
| return rc; |
| } |
| |
| /* |
| * get info about a segment |
| * possible return values: |
| * -ENOSYS : we are not running on VM |
| * -EIO : could not perform query diagnose |
| * -ENOENT : no such segment |
| * -ENOTSUPP: multi-part segment cannot be used with linux |
| * -ENOSPC : segment cannot be used (overlaps with storage) |
| * -ENOMEM : out of memory |
| * 0 .. 6 : type of segment as defined in include/asm-s390/extmem.h |
| */ |
| int |
| segment_type (char* name) |
| { |
| int rc; |
| struct dcss_segment seg; |
| |
| if (!MACHINE_IS_VM) |
| return -ENOSYS; |
| |
| dcss_mkname(name, seg.dcss_name); |
| rc = query_segment_type (&seg); |
| if (rc < 0) |
| return rc; |
| return seg.vm_segtype; |
| } |
| |
| /* |
| * real segment loading function, called from segment_load |
| */ |
| static int |
| __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long *end) |
| { |
| struct dcss_segment *seg = kmalloc(sizeof(struct dcss_segment), |
| GFP_DMA); |
| int dcss_command, rc, diag_cc; |
| |
| if (seg == NULL) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| dcss_mkname (name, seg->dcss_name); |
| rc = query_segment_type (seg); |
| if (rc < 0) |
| goto out_free; |
| |
| rc = add_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); |
| |
| switch (rc) { |
| case 0: |
| break; |
| case -ENOSPC: |
| PRINT_WARN("segment_load: not loading segment %s - overlaps " |
| "storage/segment\n", name); |
| goto out_free; |
| case -ERANGE: |
| PRINT_WARN("segment_load: not loading segment %s - exceeds " |
| "kernel mapping range\n", name); |
| goto out_free; |
| default: |
| PRINT_WARN("segment_load: not loading segment %s (rc: %d)\n", |
| name, rc); |
| goto out_free; |
| } |
| |
| seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL); |
| if (seg->res == NULL) { |
| rc = -ENOMEM; |
| goto out_shared; |
| } |
| seg->res->flags = IORESOURCE_BUSY | IORESOURCE_MEM; |
| seg->res->start = seg->start_addr; |
| seg->res->end = seg->end; |
| memcpy(&seg->res_name, seg->dcss_name, 8); |
| EBCASC(seg->res_name, 8); |
| seg->res_name[8] = '\0'; |
| strncat(seg->res_name, " (DCSS)", 7); |
| seg->res->name = seg->res_name; |
| rc = seg->vm_segtype; |
| if (rc == SEG_TYPE_SC || |
| ((rc == SEG_TYPE_SR || rc == SEG_TYPE_ER) && !do_nonshared)) |
| seg->res->flags |= IORESOURCE_READONLY; |
| if (request_resource(&iomem_resource, seg->res)) { |
| rc = -EBUSY; |
| kfree(seg->res); |
| goto out_shared; |
| } |
| |
| if (do_nonshared) |
| dcss_command = DCSS_LOADNSR; |
| else |
| dcss_command = DCSS_LOADNOLY; |
| |
| diag_cc = dcss_diag(dcss_command, seg->dcss_name, |
| &seg->start_addr, &seg->end); |
| if (diag_cc > 1) { |
| PRINT_WARN ("segment_load: could not load segment %s - " |
| "diag returned error (%ld)\n",name,seg->end); |
| rc = dcss_diag_translate_rc (seg->end); |
| dcss_diag(DCSS_PURGESEG, seg->dcss_name, |
| &seg->start_addr, &seg->end); |
| goto out_resource; |
| } |
| seg->do_nonshared = do_nonshared; |
| atomic_set(&seg->ref_count, 1); |
| list_add(&seg->list, &dcss_list); |
| *addr = seg->start_addr; |
| *end = seg->end; |
| if (do_nonshared) |
| PRINT_INFO ("segment_load: loaded segment %s range %p .. %p " |
| "type %s in non-shared mode\n", name, |
| (void*)seg->start_addr, (void*)seg->end, |
| segtype_string[seg->vm_segtype]); |
| else { |
| PRINT_INFO ("segment_load: loaded segment %s range %p .. %p " |
| "type %s in shared mode\n", name, |
| (void*)seg->start_addr, (void*)seg->end, |
| segtype_string[seg->vm_segtype]); |
| } |
| goto out; |
| out_resource: |
| release_resource(seg->res); |
| kfree(seg->res); |
| out_shared: |
| remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); |
| out_free: |
| kfree(seg); |
| out: |
| return rc; |
| } |
| |
| /* |
| * this function loads a DCSS segment |
| * name : name of the DCSS |
| * do_nonshared : 0 indicates that the dcss should be shared with other linux images |
| * 1 indicates that the dcss should be exclusive for this linux image |
| * addr : will be filled with start address of the segment |
| * end : will be filled with end address of the segment |
| * return values: |
| * -ENOSYS : we are not running on VM |
| * -EIO : could not perform query or load diagnose |
| * -ENOENT : no such segment |
| * -ENOTSUPP: multi-part segment cannot be used with linux |
| * -ENOSPC : segment cannot be used (overlaps with storage) |
| * -EBUSY : segment can temporarily not be used (overlaps with dcss) |
| * -ERANGE : segment cannot be used (exceeds kernel mapping range) |
| * -EPERM : segment is currently loaded with incompatible permissions |
| * -ENOMEM : out of memory |
| * 0 .. 6 : type of segment as defined in include/asm-s390/extmem.h |
| */ |
| int |
| segment_load (char *name, int do_nonshared, unsigned long *addr, |
| unsigned long *end) |
| { |
| struct dcss_segment *seg; |
| int rc; |
| |
| if (!MACHINE_IS_VM) |
| return -ENOSYS; |
| |
| mutex_lock(&dcss_lock); |
| seg = segment_by_name (name); |
| if (seg == NULL) |
| rc = __segment_load (name, do_nonshared, addr, end); |
| else { |
| if (do_nonshared == seg->do_nonshared) { |
| atomic_inc(&seg->ref_count); |
| *addr = seg->start_addr; |
| *end = seg->end; |
| rc = seg->vm_segtype; |
| } else { |
| *addr = *end = 0; |
| rc = -EPERM; |
| } |
| } |
| mutex_unlock(&dcss_lock); |
| return rc; |
| } |
| |
| /* |
| * this function modifies the shared state of a DCSS segment. note that |
| * name : name of the DCSS |
| * do_nonshared : 0 indicates that the dcss should be shared with other linux images |
| * 1 indicates that the dcss should be exclusive for this linux image |
| * return values: |
| * -EIO : could not perform load diagnose (segment gone!) |
| * -ENOENT : no such segment (segment gone!) |
| * -EAGAIN : segment is in use by other exploiters, try later |
| * -EINVAL : no segment with the given name is currently loaded - name invalid |
| * -EBUSY : segment can temporarily not be used (overlaps with dcss) |
| * 0 : operation succeeded |
| */ |
| int |
| segment_modify_shared (char *name, int do_nonshared) |
| { |
| struct dcss_segment *seg; |
| unsigned long dummy; |
| int dcss_command, rc, diag_cc; |
| |
| mutex_lock(&dcss_lock); |
| seg = segment_by_name (name); |
| if (seg == NULL) { |
| rc = -EINVAL; |
| goto out_unlock; |
| } |
| if (do_nonshared == seg->do_nonshared) { |
| PRINT_INFO ("segment_modify_shared: not reloading segment %s" |
| " - already in requested mode\n",name); |
| rc = 0; |
| goto out_unlock; |
| } |
| if (atomic_read (&seg->ref_count) != 1) { |
| PRINT_WARN ("segment_modify_shared: not reloading segment %s - " |
| "segment is in use by other driver(s)\n",name); |
| rc = -EAGAIN; |
| goto out_unlock; |
| } |
| release_resource(seg->res); |
| if (do_nonshared) { |
| dcss_command = DCSS_LOADNSR; |
| seg->res->flags &= ~IORESOURCE_READONLY; |
| } else { |
| dcss_command = DCSS_LOADNOLY; |
| if (seg->vm_segtype == SEG_TYPE_SR || |
| seg->vm_segtype == SEG_TYPE_ER) |
| seg->res->flags |= IORESOURCE_READONLY; |
| } |
| if (request_resource(&iomem_resource, seg->res)) { |
| PRINT_WARN("segment_modify_shared: could not reload segment %s" |
| " - overlapping resources\n", name); |
| rc = -EBUSY; |
| kfree(seg->res); |
| goto out_del; |
| } |
| dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); |
| diag_cc = dcss_diag(dcss_command, seg->dcss_name, |
| &seg->start_addr, &seg->end); |
| if (diag_cc > 1) { |
| PRINT_WARN ("segment_modify_shared: could not reload segment %s" |
| " - diag returned error (%ld)\n",name,seg->end); |
| rc = dcss_diag_translate_rc (seg->end); |
| goto out_del; |
| } |
| seg->do_nonshared = do_nonshared; |
| rc = 0; |
| goto out_unlock; |
| out_del: |
| remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); |
| list_del(&seg->list); |
| dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); |
| kfree(seg); |
| out_unlock: |
| mutex_unlock(&dcss_lock); |
| return rc; |
| } |
| |
| /* |
| * Decrease the use count of a DCSS segment and remove |
| * it from the address space if nobody is using it |
| * any longer. |
| */ |
| void |
| segment_unload(char *name) |
| { |
| unsigned long dummy; |
| struct dcss_segment *seg; |
| |
| if (!MACHINE_IS_VM) |
| return; |
| |
| mutex_lock(&dcss_lock); |
| seg = segment_by_name (name); |
| if (seg == NULL) { |
| PRINT_ERR ("could not find segment %s in segment_unload, " |
| "please report to linux390@de.ibm.com\n",name); |
| goto out_unlock; |
| } |
| if (atomic_dec_return(&seg->ref_count) != 0) |
| goto out_unlock; |
| release_resource(seg->res); |
| kfree(seg->res); |
| remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1); |
| list_del(&seg->list); |
| dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy); |
| kfree(seg); |
| out_unlock: |
| mutex_unlock(&dcss_lock); |
| } |
| |
| /* |
| * save segment content permanently |
| */ |
| void |
| segment_save(char *name) |
| { |
| struct dcss_segment *seg; |
| int startpfn = 0; |
| int endpfn = 0; |
| char cmd1[160]; |
| char cmd2[80]; |
| int i, response; |
| |
| if (!MACHINE_IS_VM) |
| return; |
| |
| mutex_lock(&dcss_lock); |
| seg = segment_by_name (name); |
| |
| if (seg == NULL) { |
| PRINT_ERR("could not find segment %s in segment_save, please " |
| "report to linux390@de.ibm.com\n", name); |
| goto out; |
| } |
| |
| startpfn = seg->start_addr >> PAGE_SHIFT; |
| endpfn = (seg->end) >> PAGE_SHIFT; |
| sprintf(cmd1, "DEFSEG %s", name); |
| for (i=0; i<seg->segcnt; i++) { |
| sprintf(cmd1+strlen(cmd1), " %X-%X %s", |
| seg->range[i].start >> PAGE_SHIFT, |
| seg->range[i].end >> PAGE_SHIFT, |
| segtype_string[seg->range[i].start & 0xff]); |
| } |
| sprintf(cmd2, "SAVESEG %s", name); |
| response = 0; |
| cpcmd(cmd1, NULL, 0, &response); |
| if (response) { |
| PRINT_ERR("segment_save: DEFSEG failed with response code %i\n", |
| response); |
| goto out; |
| } |
| cpcmd(cmd2, NULL, 0, &response); |
| if (response) { |
| PRINT_ERR("segment_save: SAVESEG failed with response code %i\n", |
| response); |
| goto out; |
| } |
| out: |
| mutex_unlock(&dcss_lock); |
| } |
| |
| EXPORT_SYMBOL(segment_load); |
| EXPORT_SYMBOL(segment_unload); |
| EXPORT_SYMBOL(segment_save); |
| EXPORT_SYMBOL(segment_type); |
| EXPORT_SYMBOL(segment_modify_shared); |