bnx2x: Cosmetic changes.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index c108e4c..838a4ed 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -26,10 +26,6 @@
 #define DRV_MODULE_RELDATE      "2011/03/20"
 #define BNX2X_BC_VER            0x040200
 
-#define BNX2X_MULTI_QUEUE
-
-#define BNX2X_NEW_NAPI
-
 #if defined(CONFIG_DCB)
 #define BCM_DCBNL
 #endif
@@ -745,9 +741,9 @@
 					 (CHIP_REV(bp) == CHIP_REV_Ax))
 
 	int			flash_size;
-#define NVRAM_1MB_SIZE			0x20000	/* 1M bit in bytes */
-#define NVRAM_TIMEOUT_COUNT		30000
-#define NVRAM_PAGE_SIZE			256
+#define BNX2X_NVRAM_1MB_SIZE			0x20000	/* 1M bit in bytes */
+#define BNX2X_NVRAM_TIMEOUT_COUNT		30000
+#define BNX2X_NVRAM_PAGE_SIZE			256
 
 	u32			shmem_base;
 	u32			shmem2_base;
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index 965fb07..1a3ed41 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -762,7 +762,7 @@
 	u32 val = 0;
 
 	/* adjust timeout for emulation/FPGA */
-	count = NVRAM_TIMEOUT_COUNT;
+	count = BNX2X_NVRAM_TIMEOUT_COUNT;
 	if (CHIP_REV_IS_SLOW(bp))
 		count *= 100;
 
@@ -793,7 +793,7 @@
 	u32 val = 0;
 
 	/* adjust timeout for emulation/FPGA */
-	count = NVRAM_TIMEOUT_COUNT;
+	count = BNX2X_NVRAM_TIMEOUT_COUNT;
 	if (CHIP_REV_IS_SLOW(bp))
 		count *= 100;
 
@@ -861,7 +861,7 @@
 	REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
 
 	/* adjust timeout for emulation/FPGA */
-	count = NVRAM_TIMEOUT_COUNT;
+	count = BNX2X_NVRAM_TIMEOUT_COUNT;
 	if (CHIP_REV_IS_SLOW(bp))
 		count *= 100;
 
@@ -984,7 +984,7 @@
 	REG_WR(bp, MCP_REG_MCPR_NVM_COMMAND, cmd_flags);
 
 	/* adjust timeout for emulation/FPGA */
-	count = NVRAM_TIMEOUT_COUNT;
+	count = BNX2X_NVRAM_TIMEOUT_COUNT;
 	if (CHIP_REV_IS_SLOW(bp))
 		count *= 100;
 
@@ -1088,9 +1088,9 @@
 	while ((written_so_far < buf_size) && (rc == 0)) {
 		if (written_so_far == (buf_size - sizeof(u32)))
 			cmd_flags |= MCPR_NVM_COMMAND_LAST;
-		else if (((offset + 4) % NVRAM_PAGE_SIZE) == 0)
+		else if (((offset + 4) % BNX2X_NVRAM_PAGE_SIZE) == 0)
 			cmd_flags |= MCPR_NVM_COMMAND_LAST;
-		else if ((offset % NVRAM_PAGE_SIZE) == 0)
+		else if ((offset % BNX2X_NVRAM_PAGE_SIZE) == 0)
 			cmd_flags |= MCPR_NVM_COMMAND_FIRST;
 
 		memcpy(&val, data_buf, 4);
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 57fac3d..6237e4a 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -1557,7 +1557,7 @@
 		offset++;
 #endif
 		for_each_eth_queue(bp, i)
-			synchronize_irq(bp->msix_table[i + offset].vector);
+			synchronize_irq(bp->msix_table[offset++].vector);
 	} else
 		synchronize_irq(bp->pdev->irq);
 
@@ -2514,7 +2514,8 @@
 	SHMEM_WR(bp, func_mb[mb_idx].drv_mb_param, param);
 	SHMEM_WR(bp, func_mb[mb_idx].drv_mb_header, (command | seq));
 
-	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
+	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB param 0x%08x\n",
+			(command | seq), param);
 
 	do {
 		/* let the FW do it's magic ... */
@@ -8193,7 +8194,7 @@
 	}
 
 	val = REG_RD(bp, MCP_REG_MCPR_NVM_CFG4);
-	bp->common.flash_size = (NVRAM_1MB_SIZE <<
+	bp->common.flash_size = (BNX2X_NVRAM_1MB_SIZE <<
 				 (val & MCPR_NVM_CFG4_FLASH_SIZE));
 	BNX2X_DEV_INFO("flash_size 0x%x (%d)\n",
 		       bp->common.flash_size, bp->common.flash_size);
@@ -8466,7 +8467,7 @@
 					(ADVERTISED_10baseT_Full |
 					 ADVERTISED_TP);
 			} else {
-				BNX2X_ERROR("NVRAM config error. "
+				BNX2X_ERR("NVRAM config error. "
 					    "Invalid link_config 0x%x"
 					    "  speed_cap_mask 0x%x\n",
 					    link_config,
@@ -8485,7 +8486,7 @@
 					(ADVERTISED_10baseT_Half |
 					 ADVERTISED_TP);
 			} else {
-				BNX2X_ERROR("NVRAM config error. "
+				BNX2X_ERR("NVRAM config error. "
 					    "Invalid link_config 0x%x"
 					    "  speed_cap_mask 0x%x\n",
 					    link_config,
@@ -8503,7 +8504,7 @@
 					(ADVERTISED_100baseT_Full |
 					 ADVERTISED_TP);
 			} else {
-				BNX2X_ERROR("NVRAM config error. "
+				BNX2X_ERR("NVRAM config error. "
 					    "Invalid link_config 0x%x"
 					    "  speed_cap_mask 0x%x\n",
 					    link_config,
@@ -8523,7 +8524,7 @@
 					(ADVERTISED_100baseT_Half |
 					 ADVERTISED_TP);
 			} else {
-				BNX2X_ERROR("NVRAM config error. "
+				BNX2X_ERR("NVRAM config error. "
 				    "Invalid link_config 0x%x"
 				    "  speed_cap_mask 0x%x\n",
 				    link_config,
@@ -8541,7 +8542,7 @@
 					(ADVERTISED_1000baseT_Full |
 					 ADVERTISED_TP);
 			} else {
-				BNX2X_ERROR("NVRAM config error. "
+				BNX2X_ERR("NVRAM config error. "
 				    "Invalid link_config 0x%x"
 				    "  speed_cap_mask 0x%x\n",
 				    link_config,
@@ -8559,7 +8560,7 @@
 					(ADVERTISED_2500baseX_Full |
 						ADVERTISED_TP);
 			} else {
-				BNX2X_ERROR("NVRAM config error. "
+				BNX2X_ERR("NVRAM config error. "
 				    "Invalid link_config 0x%x"
 				    "  speed_cap_mask 0x%x\n",
 				    link_config,
@@ -8577,7 +8578,7 @@
 					(ADVERTISED_10000baseT_Full |
 						ADVERTISED_FIBRE);
 			} else {
-				BNX2X_ERROR("NVRAM config error. "
+				BNX2X_ERR("NVRAM config error. "
 				    "Invalid link_config 0x%x"
 				    "  speed_cap_mask 0x%x\n",
 				    link_config,
@@ -8587,9 +8588,9 @@
 			break;
 
 		default:
-			BNX2X_ERROR("NVRAM config error. "
-				    "BAD link speed link_config 0x%x\n",
-					  link_config);
+			BNX2X_ERR("NVRAM config error. "
+				  "BAD link speed link_config 0x%x\n",
+				  link_config);
 				bp->link_params.req_line_speed[idx] =
 							SPEED_AUTO_NEG;
 				bp->port.advertising[idx] =
@@ -8962,14 +8963,12 @@
 					bp->mf_config[vn] = MF_CFG_RD(bp,
 						func_mf_config[func].config);
 				} else
-					DP(NETIF_MSG_PROBE, "illegal OV for "
-							    "SD\n");
+					BNX2X_DEV_INFO("illegal OV for SD\n");
 				break;
 			default:
 				/* Unknown configuration: reset mf_config */
 				bp->mf_config[vn] = 0;
-				DP(NETIF_MSG_PROBE, "Unknown MF mode 0x%x\n",
-				   val);
+				BNX2X_DEV_INFO("unkown MF mode 0x%x\n", val);
 			}
 		}
 
@@ -10406,8 +10405,8 @@
 	struct bnx2x *bp = netdev_priv(dev);
 
 	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
-		printk(KERN_ERR "Handling parity error recovery. "
-				"Try again later\n");
+		netdev_err(bp->dev, "Handling parity error recovery. "
+				    "Try again later\n");
 		return;
 	}