blob: 3935dbb78891f25fa7728b02b240d490036d7b0f [file] [log] [blame]
/*
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
&soc {
led_flash0: qcom,camera-led-flash {
cell-index = <0>;
compatible = "qcom,camera-led-flash";
qcom,flash-type = <1>;
qcom,flash-source = <&pm8226_flash0 &pm8226_flash1>;
};
};
&cci {
actuator0: qcom,actuator@6e {
cell-index = <3>;
reg = <0x6c>;
compatible = "qcom,actuator";
qcom,cci-master = <0>;
};
qcom,camera@6f {
compatible = "qcom,ov8825";
reg = <0x6f>;
qcom,slave-id = <0x6c 0x300a 0x8825>;
qcom,csiphy-sd-index = <0>;
qcom,csid-sd-index = <0>;
qcom,actuator-src = <&actuator0>;
qcom,led-flash-src = <&led_flash0>;
qcom,mount-angle = <270>;
qcom,sensor-name = "ov8825";
cam_vdig-supply = <&pm8226_l5>;
cam_vana-supply = <&pm8226_l19>;
cam_vio-supply = <&pm8226_lvs1>;
cam_vaf-supply = <&pm8226_l15>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
"cam_vaf";
qcom,cam-vreg-type = <0 1 0 0>;
qcom,cam-vreg-min-voltage = <1200000 0 2850000 2800000>;
qcom,cam-vreg-max-voltage = <1200000 0 2850000 2800000>;
qcom,cam-vreg-op-mode = <200000 0 80000 100000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 26 0>,
<&msmgpio 37 0>,
<&msmgpio 36 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET1",
"CAM_STANDBY";
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x1f>;
qcom,sensor-position = <0>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
};
qcom,camera@6d {
compatible = "qcom,ov9724";
reg = <0x6d>;
qcom,slave-id = <0x20 0x0 0x9724>;
qcom,csiphy-sd-index = <1>;
qcom,csid-sd-index = <1>;
qcom,mount-angle = <270>;
qcom,sensor-name = "ov9724";
cam_vdig-supply = <&pm8226_l5>;
cam_vana-supply = <&pm8226_l19>;
cam_vio-supply = <&pm8226_lvs1>;
qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";
qcom,cam-vreg-type = <0 1 0>;
qcom,cam-vreg-min-voltage = <1200000 0 2850000>;
qcom,cam-vreg-max-voltage = <1200000 0 2850000>;
qcom,cam-vreg-op-mode = <200000 0 80000>;
qcom,gpio-no-mux = <0>;
gpios = <&msmgpio 26 0>,
<&msmgpio 28 0>,
<&msmgpio 35 0>;
qcom,gpio-reset = <1>;
qcom,gpio-standby = <2>;
qcom,gpio-req-tbl-num = <0 1 2>;
qcom,gpio-req-tbl-flags = <1 0 0>;
qcom,gpio-req-tbl-label = "CAMIF_MCLK",
"CAM_RESET",
"CAM_STANDBY";
qcom,gpio-set-tbl-num = <1 1>;
qcom,gpio-set-tbl-flags = <0 2>;
qcom,gpio-set-tbl-delay = <1000 4000>;
qcom,csi-lane-assign = <0x4320>;
qcom,csi-lane-mask = <0x3>;
qcom,sensor-position = <1>;
qcom,sensor-mode = <1>;
qcom,cci-master = <0>;
status = "ok";
};
};