| /* |
| * Low-Level PCI Support for the SH7780 |
| * |
| * Copyright (C) 2005 - 2009 Paul Mundt |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| */ |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include "pci-sh4.h" |
| |
| static struct resource sh7785_io_resource = { |
| .name = "SH7785_IO", |
| .start = SH7780_PCI_IO_BASE, |
| .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, |
| .flags = IORESOURCE_IO |
| }; |
| |
| static struct resource sh7785_mem_resource = { |
| .name = "SH7785_mem", |
| .start = SH7780_PCI_MEMORY_BASE, |
| .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, |
| .flags = IORESOURCE_MEM |
| }; |
| |
| static struct pci_channel sh7780_pci_controller = { |
| .pci_ops = &sh4_pci_ops, |
| .mem_resource = &sh7785_mem_resource, |
| .mem_offset = 0x00000000, |
| .io_resource = &sh7785_io_resource, |
| .io_offset = 0x00000000, |
| .io_map_base = SH7780_PCI_IO_BASE, |
| }; |
| |
| static struct sh4_pci_address_map sh7780_pci_map = { |
| .window0 = { |
| #if defined(CONFIG_32BIT) |
| .base = SH7780_32BIT_DDR_BASE_ADDR, |
| .size = 0x40000000, |
| #else |
| .base = SH7780_CS0_BASE_ADDR, |
| .size = 0x20000000, |
| #endif |
| }, |
| }; |
| |
| static int __init sh7780_pci_init(void) |
| { |
| struct pci_channel *chan = &sh7780_pci_controller; |
| unsigned int id; |
| const char *type = NULL; |
| int ret; |
| u32 word; |
| |
| printk(KERN_NOTICE "PCI: Starting intialization.\n"); |
| |
| chan->reg_base = 0xfe040000; |
| |
| /* Enable CPU access to the PCIC registers. */ |
| __raw_writel(PCIECR_ENBL, PCIECR); |
| |
| id = __raw_readw(chan->reg_base + SH7780_PCIVID); |
| if (id != SH7780_VENDOR_ID) { |
| printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); |
| return -ENODEV; |
| } |
| |
| id = __raw_readw(chan->reg_base + SH7780_PCIDID); |
| type = (id == SH7763_DEVICE_ID) ? "SH7763" : |
| (id == SH7780_DEVICE_ID) ? "SH7780" : |
| (id == SH7781_DEVICE_ID) ? "SH7781" : |
| (id == SH7785_DEVICE_ID) ? "SH7785" : |
| NULL; |
| if (unlikely(!type)) { |
| printk(KERN_ERR "PCI: Found an unsupported Renesas host " |
| "controller, device id 0x%04x.\n", id); |
| return -EINVAL; |
| } |
| |
| printk(KERN_NOTICE "PCI: Found a Renesas %s host " |
| "controller, revision %d.\n", type, |
| __raw_readb(chan->reg_base + SH7780_PCIRID)); |
| |
| if ((ret = sh4_pci_check_direct(chan)) != 0) |
| return ret; |
| |
| /* |
| * Set the class and sub-class codes. |
| */ |
| __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, |
| chan->reg_base + SH7780_PCIBCC); |
| __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff, |
| chan->reg_base + SH7780_PCISUB); |
| |
| /* |
| * Set IO and Mem windows to local address |
| * Make PCI and local address the same for easy 1 to 1 mapping |
| */ |
| pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0); |
| /* Set the values on window 0 PCI config registers */ |
| pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0); |
| pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0); |
| |
| pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); |
| |
| /* Set up standard PCI config registers */ |
| __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS); |
| __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD); |
| __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID); |
| __raw_writew(0x0001, chan->reg_base + SH7780_PCISID); |
| |
| __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF); |
| |
| /* Apply any last-minute PCIC fixups */ |
| pci_fixup_pcic(chan); |
| |
| pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); |
| pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); |
| |
| #ifdef CONFIG_32BIT |
| pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); |
| pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); |
| #endif |
| |
| /* Set IOBR for windows containing area specified in pci.h */ |
| pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), |
| SH7780_PCIIOBR); |
| pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), |
| SH7780_PCIIOBMR); |
| |
| /* SH7780 init done, set central function init complete */ |
| /* use round robin mode to stop a device starving/overruning */ |
| word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; |
| pci_write_reg(chan, word, SH4_PCICR); |
| |
| register_pci_controller(chan); |
| |
| return 0; |
| } |
| arch_initcall(sh7780_pci_init); |