arm/dt: msm: Refactor MSM8974 DTS files
Refactor each MSM8974 platform DTS file into a platform-
specific DTSI file and a corresponding DTS stub, to more
easily allow for creating DTS files for platforms using
varying SoC-specific DTSI includes.
Change-Id: I8b3a025fb445d868e14054a62b24d28882f46fec
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
diff --git a/arch/arm/boot/dts/msm8974-cdp.dtsi b/arch/arm/boot/dts/msm8974-cdp.dtsi
new file mode 100644
index 0000000..00f20ad
--- /dev/null
+++ b/arch/arm/boot/dts/msm8974-cdp.dtsi
@@ -0,0 +1,361 @@
+/* Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/include/ "dsi-panel-toshiba-720p-video.dtsi"
+
+/ {
+ serial@f991e000 {
+ status = "ok";
+ };
+
+ qcom,mdss_dsi@fd922800 {
+ qcom,mdss_dsi_toshiba_720p_video {
+ status = "ok";
+ };
+ };
+
+ qcom,hdmi_tx@fd922100 {
+ status = "ok";
+ };
+
+ i2c@f9924000 {
+ atmel_mxt_ts@4a {
+ compatible = "atmel,mxt-ts";
+ reg = <0x4a>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <61 0x2>;
+ vdd_ana-supply = <&pm8941_l18>;
+ vcc_i2c-supply = <&pm8941_lvs1>;
+ atmel,reset-gpio = <&msmgpio 60 0x00>;
+ atmel,irq-gpio = <&msmgpio 61 0x00>;
+ atmel,panel-coords = <0 0 760 1424>;
+ atmel,display-coords = <0 0 720 1280>;
+ atmel,i2c-pull-up = <1>;
+ atmel,cfg_1 {
+ atmel,family-id = <0x82>;
+ atmel,variant-id = <0x19>;
+ atmel,version = <0x10>;
+ atmel,build = <0xaa>;
+ atmel,config = [
+ /* Object 6, Instance = 0 */
+ 00 00 00 00 00 00
+ /* Object 38, Instance = 0 */
+ 15 00 02 10 08 0C 00 00
+ /* Object 7, Instance = 0 */
+ FF FF 32 03
+ /* Object 8, Instance = 0 */
+ 0F 00 0A 0A 00 00 0A 00 00 00
+ /* Object 9, Instance = 0 */
+ 83 00 00 18 0E 00 70 32 02 01
+ 00 03 01 01 05 0A 0A 0A 90 05
+ F8 02 00 00 0F 0F 00 00 48 2D
+ 07 0C 00 00 00 00
+ /* Object 15, Instance = 0 */
+ 00 00 00 00 00 00 00 00 00 00
+ 00
+ /* Object 18, Instance = 0 */
+ 00 00
+ /* Object 19, Instance = 0 */
+ 00 00 00 00 00 00
+ /* Object 23, Instance = 0 */
+ 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00
+ /* Object 25, Instance = 0 */
+ 00 00 00 00 00 00 00 00 00 00
+ 00 00 00 00 00
+ /* Object 40, Instance = 0 */
+ 00 00 00 00 00
+ /* Object 42, Instance = 0 */
+ 00 00 00 00 00 00 00 00 00 00
+ /* Object 46, Instance = 0 */
+ 00 00 10 10 00 00 03 00 00 01
+ /* Object 47, Instance = 0 */
+ 08 0A 28 0A 02 0A 00 8C 00 20
+ 00 00 00
+ /* Object 55, Instance = 0 */
+ 00 00 00 00 00 00
+ /* Object 56, Instance = 0 */
+ 03 00 01 18 05 05 05 05 05 05
+ 05 05 05 05 05 05 05 05 05 05
+ 05 05 05 05 05 05 05 05 00 00
+ 00 00 00 00 00 00 00 00 00 00
+ 00 00
+ /* Object 57, Instance = 0 */
+ 00 00 00
+ /* Object 61, Instance = 0 */
+ 00 00 00 00 00
+ /* Object 61, Instance = 1 */
+ 00 00 00 00 00
+ /* Object 62, Instance = 0 */
+ 7F 03 00 16 00 00 00 00 00 00
+ 04 08 10 18 05 00 0A 05 05 50
+ 14 19 34 1A 64 00 00 04 40 00
+ 00 00 00 00 30 32 02 00 01 00
+ 05 00 00 00 00 00 00 00 00 00
+ 00 00 0C 00
+ ];
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ camera_snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 0x1>;
+ linux,input-type = <1>;
+ linux,code = <0x2fe>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+
+ camera_focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 0x1>;
+ linux,input-type = <1>;
+ linux,code = <0x210>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+
+ vol_up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 0x1>;
+ linux,input-type = <1>;
+ linux,code = <115>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+ };
+
+ spi@f9923000 {
+ ethernet-switch@2 {
+ compatible = "micrel,ks8851";
+ reg = <2>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <94 0>;
+ spi-max-frequency = <4800000>;
+ rst-gpio = <&pm8941_mpps 6 0>;
+ vdd-io-supply = <&spi_eth_vreg>;
+ vdd-phy-supply = <&spi_eth_vreg>;
+ };
+ };
+};
+
+&sdcc2 {
+ #address-cells = <0>;
+ interrupt-parent = <&sdcc2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 220 0
+ 2 &msmgpio 62 0x3>;
+ interrupt-names = "core_irq", "bam_irq", "status_irq";
+ cd-gpios = <&msmgpio 62 0x1>;
+ wp-gpios = <&pm8941_gpios 29 0x1>;
+};
+
+&pm8941_gpios {
+ gpio@c000 { /* GPIO 1 */
+ };
+
+ gpio@c100 { /* GPIO 2 */
+ };
+
+ gpio@c200 { /* GPIO 3 */
+ qcom,mode = <0>;
+ qcom,pull = <0>;
+ qcom,vin-sel = <2>;
+ qcom,select = <0>;
+ };
+
+ gpio@c300 { /* GPIO 4 */
+ qcom,mode = <0>;
+ qcom,pull = <0>;
+ qcom,vin-sel = <2>;
+ qcom,select = <0>;
+ };
+
+ gpio@c400 { /* GPIO 5 */
+ qcom,mode = <0>;
+ qcom,pull = <0>;
+ qcom,vin-sel = <2>;
+ qcom,select = <0>;
+ };
+
+ gpio@c500 { /* GPIO 6 */
+ };
+
+ gpio@c600 { /* GPIO 7 */
+ };
+
+ gpio@c700 { /* GPIO 8 */
+ };
+
+ gpio@c800 { /* GPIO 9 */
+ };
+
+ gpio@c900 { /* GPIO 10 */
+ };
+
+ gpio@ca00 { /* GPIO 11 */
+ };
+
+ gpio@cb00 { /* GPIO 12 */
+ };
+
+ gpio@cc00 { /* GPIO 13 */
+ };
+
+ gpio@cd00 { /* GPIO 14 */
+ };
+
+ gpio@ce00 { /* GPIO 15 */
+ qcom,mode = <1>;
+ qcom,output-type = <0>;
+ qcom,pull = <5>;
+ qcom,vin-sel = <2>;
+ qcom,out-strength = <3>;
+ qcom,src-select = <2>;
+ qcom,master-en = <1>;
+ };
+
+ gpio@cf00 { /* GPIO 16 */
+ };
+
+ gpio@d000 { /* GPIO 17 */
+ };
+
+ gpio@d100 { /* GPIO 18 */
+ };
+
+ gpio@d200 { /* GPIO 19 */
+ qcom,mode = <1>; /* QPNP_PIN_MODE_DIG_OUT */
+ qcom,output-type = <0>; /* QPNP_PIN_OUT_BUF_CMOS */
+ qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
+ qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
+ qcom,out-strength = <2>; /* QPNP_PIN_OUT_STRENGTH_MED */
+ qcom,src-select = <0>; /* QPNP_PIN_SEL_FUNC_CONSTANT */
+ qcom,master-en = <1>;
+ };
+
+ gpio@d300 { /* GPIO 20 */
+ };
+
+ gpio@d400 { /* GPIO 21 */
+ };
+
+ gpio@d500 { /* GPIO 22 */
+ };
+
+ gpio@d600 { /* GPIO 23 */
+ };
+
+ gpio@d700 { /* GPIO 24 */
+ };
+
+ gpio@d800 { /* GPIO 25 */
+ };
+
+ gpio@d900 { /* GPIO 26 */
+ };
+
+ gpio@da00 { /* GPIO 27 */
+ };
+
+ gpio@db00 { /* GPIO 28 */
+ };
+
+ gpio@dc00 { /* GPIO 29 */
+ qcom,pull = <0>; /* set to default pull */
+ qcom,master-en = <1>;
+ qcom,vin-sel = <2>; /* select 1.8 V source */
+ };
+
+ gpio@dd00 { /* GPIO 30 */
+ };
+
+ gpio@de00 { /* GPIO 31 */
+ };
+
+ gpio@df00 { /* GPIO 32 */
+ };
+
+ gpio@e000 { /* GPIO 33 */
+ };
+
+ gpio@e100 { /* GPIO 34 */
+ };
+
+ gpio@e200 { /* GPIO 35 */
+ };
+
+ gpio@e300 { /* GPIO 36 */
+ };
+};
+
+&pm8941_mpps {
+
+ mpp@a000 { /* MPP 1 */
+ };
+
+ mpp@a100 { /* MPP 2 */
+ };
+
+ mpp@a200 { /* MPP 3 */
+ };
+
+ mpp@a300 { /* MPP 4 */
+ };
+
+ mpp@a400 { /* MPP 5 */
+ /* SPI_ETH config */
+ qcom,mode = <1>; /* DIG_OUT */
+ qcom,output-type = <0>; /* CMOS */
+ qcom,vin-sel = <2>; /* PM8941_S3 1.8V > 1.6V */
+ qcom,src-select = <0>; /* CONSTANT */
+ qcom,master-en = <1>; /* ENABLE MPP */
+ };
+
+ mpp@a500 { /* MPP 6 */
+ /* SPI_ETH_RST config */
+ qcom,mode = <1>; /* DIG_OUT */
+ qcom,output-type = <0>; /* CMOS */
+ qcom,vin-sel = <2>; /* PM8941_S3 1.8V > 1.6V */
+ qcom,src-select = <0>; /* CONSTANT */
+ qcom,master-en = <1>; /* ENABLE MPP */
+ };
+
+ mpp@a600 { /* MPP 7 */
+ };
+
+ mpp@a700 { /* MPP 8 */
+ };
+};
+
+&pm8841_mpps {
+
+ mpp@a000 { /* MPP 1 */
+ };
+
+ mpp@a100 { /* MPP 2 */
+ };
+
+ mpp@a200 { /* MPP 3 */
+ };
+
+ mpp@a300 { /* MPP 4 */
+ };
+};