myri10ge: add routines for multislices
Add several routines that multislices support will use.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew Gallatin <gallatin@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 36be6ef..f3ef9e3 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -1928,6 +1928,76 @@
return 0;
}
+#if 0
+static int myri10ge_get_txrx(struct myri10ge_priv *mgp, int slice)
+{
+ struct myri10ge_cmd cmd;
+ struct myri10ge_slice_state *ss;
+ int status;
+
+ ss = &mgp->ss[slice];
+ cmd.data0 = 0; /* single slice for now */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0);
+ ss->tx.lanai = (struct mcp_kreq_ether_send __iomem *)
+ (mgp->sram + cmd.data0);
+
+ cmd.data0 = slice;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET,
+ &cmd, 0);
+ ss->rx_small.lanai = (struct mcp_kreq_ether_recv __iomem *)
+ (mgp->sram + cmd.data0);
+
+ cmd.data0 = slice;
+ status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
+ ss->rx_big.lanai = (struct mcp_kreq_ether_recv __iomem *)
+ (mgp->sram + cmd.data0);
+
+ if (myri10ge_wcfifo && mgp->wc_enabled) {
+ ss->tx.wc_fifo = (u8 __iomem *)
+ mgp->sram + MXGEFW_ETH_SEND_4 + 64 * slice;
+ ss->rx_small.wc_fifo = (u8 __iomem *)
+ mgp->sram + MXGEFW_ETH_RECV_SMALL + 64 * slice;
+ ss->rx_big.wc_fifo = (u8 __iomem *)
+ mgp->sram + MXGEFW_ETH_RECV_BIG + 64 * slice;
+ } else {
+ ss->tx.wc_fifo = NULL;
+ ss->rx_small.wc_fifo = NULL;
+ ss->rx_big.wc_fifo = NULL;
+ }
+ return status;
+
+}
+
+static int myri10ge_set_stats(struct myri10ge_priv *mgp, int slice)
+{
+ struct myri10ge_cmd cmd;
+ struct myri10ge_slice_state *ss;
+ int status;
+
+ ss = &mgp->ss[slice];
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(ss->fw_stats_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(ss->fw_stats_bus);
+ cmd.data2 = sizeof(struct mcp_irq_data);
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
+ if (status == -ENOSYS) {
+ dma_addr_t bus = ss->fw_stats_bus;
+ if (slice != 0)
+ return -EINVAL;
+ bus += offsetof(struct mcp_irq_data, send_done_count);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
+ status = myri10ge_send_cmd(mgp,
+ MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
+ &cmd, 0);
+ /* Firmware cannot support multicast without STATS_DMA_V2 */
+ mgp->fw_multicast_support = 0;
+ } else {
+ mgp->fw_multicast_support = 1;
+ }
+ return 0;
+}
+#endif
+
static int myri10ge_open(struct net_device *dev)
{
struct myri10ge_priv *mgp = netdev_priv(dev);
@@ -3106,6 +3176,192 @@
mgp->watchdog_pause = rx_pause_cnt;
}
+#if 0
+static void myri10ge_free_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_slice_state *ss;
+ struct pci_dev *pdev = mgp->pdev;
+ size_t bytes;
+ int i;
+
+ if (mgp->ss == NULL)
+ return;
+
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ if (ss->rx_done.entry != NULL) {
+ bytes = mgp->max_intr_slots *
+ sizeof(*ss->rx_done.entry);
+ dma_free_coherent(&pdev->dev, bytes,
+ ss->rx_done.entry, ss->rx_done.bus);
+ ss->rx_done.entry = NULL;
+ }
+ if (ss->fw_stats != NULL) {
+ bytes = sizeof(*ss->fw_stats);
+ dma_free_coherent(&pdev->dev, bytes,
+ ss->fw_stats, ss->fw_stats_bus);
+ ss->fw_stats = NULL;
+ }
+ }
+ kfree(mgp->ss);
+ mgp->ss = NULL;
+}
+
+static int myri10ge_alloc_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_slice_state *ss;
+ struct pci_dev *pdev = mgp->pdev;
+ size_t bytes;
+ int i;
+
+ bytes = sizeof(*mgp->ss) * mgp->num_slices;
+ mgp->ss = kzalloc(bytes, GFP_KERNEL);
+ if (mgp->ss == NULL) {
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < mgp->num_slices; i++) {
+ ss = &mgp->ss[i];
+ bytes = mgp->max_intr_slots * sizeof(*ss->rx_done.entry);
+ ss->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
+ &ss->rx_done.bus,
+ GFP_KERNEL);
+ if (ss->rx_done.entry == NULL)
+ goto abort;
+ memset(ss->rx_done.entry, 0, bytes);
+ bytes = sizeof(*ss->fw_stats);
+ ss->fw_stats = dma_alloc_coherent(&pdev->dev, bytes,
+ &ss->fw_stats_bus,
+ GFP_KERNEL);
+ if (ss->fw_stats == NULL)
+ goto abort;
+ ss->mgp = mgp;
+ ss->dev = mgp->dev;
+ netif_napi_add(ss->dev, &ss->napi, myri10ge_poll,
+ myri10ge_napi_weight);
+ }
+ return 0;
+abort:
+ myri10ge_free_slices(mgp);
+ return -ENOMEM;
+}
+
+/*
+ * This function determines the number of slices supported.
+ * The number slices is the minumum of the number of CPUS,
+ * the number of MSI-X irqs supported, the number of slices
+ * supported by the firmware
+ */
+static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_cmd cmd;
+ struct pci_dev *pdev = mgp->pdev;
+ char *old_fw;
+ int i, status, ncpus, msix_cap;
+
+ mgp->num_slices = 1;
+ msix_cap = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ ncpus = num_online_cpus();
+
+ if (myri10ge_max_slices == 1 || msix_cap == 0 ||
+ (myri10ge_max_slices == -1 && ncpus < 2))
+ return;
+
+ /* try to load the slice aware rss firmware */
+ old_fw = mgp->fw_name;
+ if (old_fw == myri10ge_fw_aligned)
+ mgp->fw_name = myri10ge_fw_rss_aligned;
+ else
+ mgp->fw_name = myri10ge_fw_rss_unaligned;
+ status = myri10ge_load_firmware(mgp, 0);
+ if (status != 0) {
+ dev_info(&pdev->dev, "Rss firmware not found\n");
+ return;
+ }
+
+ /* hit the board with a reset to ensure it is alive */
+ memset(&cmd, 0, sizeof(cmd));
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed reset\n");
+ goto abort_with_fw;
+ return;
+ }
+
+ mgp->max_intr_slots = cmd.data0 / sizeof(struct mcp_slot);
+
+ /* tell it the size of the interrupt queues */
+ cmd.data0 = mgp->max_intr_slots * sizeof(struct mcp_slot);
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
+ goto abort_with_fw;
+ }
+
+ /* ask the maximum number of slices it supports */
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd, 0);
+ if (status != 0)
+ goto abort_with_fw;
+ else
+ mgp->num_slices = cmd.data0;
+
+ /* Only allow multiple slices if MSI-X is usable */
+ if (!myri10ge_msi) {
+ goto abort_with_fw;
+ }
+
+ /* if the admin did not specify a limit to how many
+ * slices we should use, cap it automatically to the
+ * number of CPUs currently online */
+ if (myri10ge_max_slices == -1)
+ myri10ge_max_slices = ncpus;
+
+ if (mgp->num_slices > myri10ge_max_slices)
+ mgp->num_slices = myri10ge_max_slices;
+
+ /* Now try to allocate as many MSI-X vectors as we have
+ * slices. We give up on MSI-X if we can only get a single
+ * vector. */
+
+ mgp->msix_vectors = kzalloc(mgp->num_slices *
+ sizeof(*mgp->msix_vectors), GFP_KERNEL);
+ if (mgp->msix_vectors == NULL)
+ goto disable_msix;
+ for (i = 0; i < mgp->num_slices; i++) {
+ mgp->msix_vectors[i].entry = i;
+ }
+
+ while (mgp->num_slices > 1) {
+ /* make sure it is a power of two */
+ while (!is_power_of_2(mgp->num_slices))
+ mgp->num_slices--;
+ if (mgp->num_slices == 1)
+ goto disable_msix;
+ status = pci_enable_msix(pdev, mgp->msix_vectors,
+ mgp->num_slices);
+ if (status == 0) {
+ pci_disable_msix(pdev);
+ return;
+ }
+ if (status > 0)
+ mgp->num_slices = status;
+ else
+ goto disable_msix;
+ }
+
+disable_msix:
+ if (mgp->msix_vectors != NULL) {
+ kfree(mgp->msix_vectors);
+ mgp->msix_vectors = NULL;
+ }
+
+abort_with_fw:
+ mgp->num_slices = 1;
+ mgp->fw_name = old_fw;
+ myri10ge_load_firmware(mgp, 0);
+}
+#endif
+
static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *netdev;