Merge "arm/dt: msm8226: Add pm8226 vibrator to device tree"
diff --git a/arch/arm/boot/dts/msm8226-pm.dtsi b/arch/arm/boot/dts/msm8226-pm.dtsi
index 039c0b7..3c86cb6 100644
--- a/arch/arm/boot/dts/msm8226-pm.dtsi
+++ b/arch/arm/boot/dts/msm8226-pm.dtsi
@@ -25,9 +25,9 @@
qcom,saw2-spm-ctl = <0x0>;
qcom,saw2-spm-cmd-wfi = [60 03 60 0b 0f];
qcom,saw2-spm-cmd-spc = [00 20 10 80 30 90 5b 60 03 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
qcom,saw2-spm-cmd-pc = [00 20 10 80 30 90 5b 60 07 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
};
qcom,spm@f9099000 {
@@ -42,9 +42,9 @@
qcom,saw2-spm-ctl = <0x0>;
qcom,saw2-spm-cmd-wfi = [60 03 60 0b 0f];
qcom,saw2-spm-cmd-spc = [00 20 10 80 30 90 5b 60 03 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
qcom,saw2-spm-cmd-pc = [00 20 10 80 30 90 5b 60 07 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
};
qcom,spm@f90a9000 {
@@ -57,11 +57,11 @@
qcom,saw2-cfg = <0x01>;
qcom,saw2-spm-dly= <0x3c102800>;
qcom,saw2-spm-ctl = <0x0>;
- qcom,saw2-spm-cmd-wfi = [60 03 60 76 76 0b 0f];
+ qcom,saw2-spm-cmd-wfi = [60 03 60 0b 0f];
qcom,saw2-spm-cmd-spc = [00 20 10 80 30 90 5b 60 03 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
qcom,saw2-spm-cmd-pc = [00 20 10 80 30 90 5b 60 07 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
};
qcom,spm@f90b9000 {
@@ -74,11 +74,11 @@
qcom,saw2-cfg = <0x01>;
qcom,saw2-spm-dly= <0x3c102800>;
qcom,saw2-spm-ctl = <0x0>;
- qcom,saw2-spm-cmd-wfi = [60 03 60 76 76 0b 0f];
+ qcom,saw2-spm-cmd-wfi = [60 03 60 0b 0f];
qcom,saw2-spm-cmd-spc = [00 20 10 80 30 90 5b 60 03 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
qcom,saw2-spm-cmd-pc = [00 20 10 80 30 90 5b 60 07 60 3b 76 76
- 0b 94 5b 80 10 2b 06 26 30 0f];
+ 0b 94 5b 80 10 06 26 30 0f];
};
qcom,spm@f9012000 {
@@ -91,19 +91,16 @@
qcom,saw2-cfg = <0x14>;
qcom,saw2-spm-dly= <0x3c102800>;
qcom,saw2-spm-ctl = <0x0>;
- qcom,saw2-pmic-data0 = <0x0400009c>;
- qcom,saw2-pmic-data1 = <0x0000001c>;
+ qcom,saw2-pmic-data0 = <0x02030080>;
+ qcom,saw2-pmic-data1 = <0x00030000>;
qcom,vctl-timeout-us = <50>;
qcom,vctl-port = <0x0>;
qcom,phase-port = <0x1>;
qcom,pfm-port = <0x2>;
qcom,saw2-spm-cmd-ret = [00 03 00 7b 0f];
- qcom,saw2-spm-cmd-gdhs = [00 20 32 60 70 80 6b c0 e0 d0 42 07
- 78 1f 80 4e d0 e0 c0 22 6b 50 4b 60 02 32 50 7b
- 0f];
- qcom,saw2-spm-cmd-pc = [00 32 60 70 80 b0 10 e0 d0 6b c0
- 42 f0 11 07 01 b0 78 1f 80 4e c0 d0 12 e0 6b 50 4b
- 60 02 32 50 f0 7b 0f]; /*APCS_PMIC_OFF_L2RAM_OFF*/
+ qcom,saw2-spm-cmd-pc = [00 32 b0 10 e0 d0 6b c0 42 f0
+ 11 07 01 b0 4e c0 d0 12 e0 6b 50 02 32
+ 50 f0 7b 0f]; /*APCS_PMIC_OFF_L2RAM_OFF*/
};
qcom,lpm-resources {
diff --git a/arch/arm/boot/dts/msm8610-coresight.dtsi b/arch/arm/boot/dts/msm8610-coresight.dtsi
index 3612078..89a00f1 100644
--- a/arch/arm/boot/dts/msm8610-coresight.dtsi
+++ b/arch/arm/boot/dts/msm8610-coresight.dtsi
@@ -203,7 +203,7 @@
coresight-name = "coresight-csr";
coresight-nr-inports = <0>;
- qcom,blk-size = <3>;
+ qcom,blk-size = <1>;
};
cti0: cti@fc310000 {
diff --git a/arch/arm/boot/dts/msm8974-camera-sensor-cdp.dtsi b/arch/arm/boot/dts/msm8974-camera-sensor-cdp.dtsi
new file mode 100644
index 0000000..a6a115c
--- /dev/null
+++ b/arch/arm/boot/dts/msm8974-camera-sensor-cdp.dtsi
@@ -0,0 +1,132 @@
+/*
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+&cci {
+
+ actuator0: qcom,actuator@18 {
+ cell-index = <0>;
+ reg = <0x18 0x0>;
+ compatible = "qcom,actuator";
+ qcom,cci-master = <0>;
+ };
+
+ qcom,camera@6e {
+ compatible = "qcom,s5k3l1yx";
+ reg = <0x6e 0x0>;
+ qcom,slave-id = <0x6e 0x0 0x3121>;
+ qcom,csiphy-sd-index = <0>;
+ qcom,csid-sd-index = <0>;
+ qcom,actuator-src = <&actuator0>;
+ qcom,mount-angle = <90>;
+ qcom,sensor-name = "s5k3l1yx";
+ cam_vdig-supply = <&pm8941_l3>;
+ cam_vana-supply = <&pm8941_l17>;
+ cam_vio-supply = <&pm8941_lvs3>;
+ cam_vaf-supply = <&pm8941_l23>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",
+ "cam_vaf";
+ qcom,cam-vreg-type = <0 1 0 0>;
+ qcom,cam-vreg-min-voltage = <1225000 0 2850000 3000000>;
+ qcom,cam-vreg-max-voltage = <1225000 0 2850000 3000000>;
+ qcom,cam-vreg-op-mode = <105000 0 80000 100000>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 15 0>,
+ <&msmgpio 90 0>,
+ <&msmgpio 89 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-standby = <2>;
+ qcom,gpio-req-tbl-num = <0 1 2>;
+ qcom,gpio-req-tbl-flags = <1 0 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET1",
+ "CAM_STANDBY";
+ qcom,gpio-set-tbl-num = <1 1>;
+ qcom,gpio-set-tbl-flags = <0 2>;
+ qcom,gpio-set-tbl-delay = <1000 30000>;
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x1F>;
+ qcom,sensor-position = <0>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ };
+
+ qcom,camera@6c {
+ compatible = "qcom,ov2720";
+ reg = <0x6c 0x0>;
+ qcom,slave-id = <0x6c 0x300A 0x2720>;
+ qcom,csiphy-sd-index = <2>;
+ qcom,csid-sd-index = <0>;
+ qcom,mount-angle = <90>;
+ qcom,sensor-name = "ov2720";
+ cam_vdig-supply = <&pm8941_l3>;
+ cam_vana-supply = <&pm8941_l17>;
+ cam_vio-supply = <&pm8941_lvs3>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio";
+ qcom,cam-vreg-type = <0 0 1>;
+ qcom,cam-vreg-min-voltage = <1225000 2850000 0>;
+ qcom,cam-vreg-max-voltage = <1225000 2850000 0>;
+ qcom,cam-vreg-op-mode = <105000 80000 0>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 17 0>,
+ <&msmgpio 18 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-req-tbl-num = <0 1>;
+ qcom,gpio-req-tbl-flags = <1 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET1";
+ qcom,gpio-set-tbl-num = <1 1>;
+ qcom,gpio-set-tbl-flags = <0 2>;
+ qcom,gpio-set-tbl-delay = <1000 4000>;
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x7>;
+ qcom,sensor-position = <1>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ status = "ok";
+ };
+
+ qcom,camera@90 {
+ compatible = "qcom,mt9m114";
+ reg = <0x90 0x0>;
+ qcom,slave-id = <0x90 0x0 0x2481>;
+ qcom,csiphy-sd-index = <1>;
+ qcom,csid-sd-index = <0>;
+ qcom,mount-angle = <0>;
+ qcom,sensor-name = "mt9m114";
+ cam_vdig-supply = <&pm8941_l3>;
+ cam_vana-supply = <&pm8941_l17>;
+ cam_vio-supply = <&pm8941_lvs3>;
+ qcom,cam-vreg-name = "cam_vdig", "cam_vana", "cam_vio";
+ qcom,cam-vreg-type = <0 0 1>;
+ qcom,cam-vreg-min-voltage = <1225000 2850000 0>;
+ qcom,cam-vreg-max-voltage = <1225000 2850000 0>;
+ qcom,cam-vreg-op-mode = <105000 80000 0>;
+ qcom,gpio-no-mux = <0>;
+ gpios = <&msmgpio 16 0>,
+ <&msmgpio 92 0>;
+ qcom,gpio-reset = <1>;
+ qcom,gpio-req-tbl-num = <0 1>;
+ qcom,gpio-req-tbl-flags = <1 0>;
+ qcom,gpio-req-tbl-label = "CAMIF_MCLK",
+ "CAM_RESET1";
+ qcom,gpio-set-tbl-num = <1 1>;
+ qcom,gpio-set-tbl-flags = <0 2>;
+ qcom,gpio-set-tbl-delay = <1000 4000>;
+ qcom,csi-lane-assign = <0x4320>;
+ qcom,csi-lane-mask = <0x3>;
+ qcom,sensor-position = <1>;
+ qcom,sensor-mode = <1>;
+ qcom,cci-master = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/msm8974-camera-sensor-cdp-mtp.dtsi b/arch/arm/boot/dts/msm8974-camera-sensor-mtp.dtsi
similarity index 100%
rename from arch/arm/boot/dts/msm8974-camera-sensor-cdp-mtp.dtsi
rename to arch/arm/boot/dts/msm8974-camera-sensor-mtp.dtsi
diff --git a/arch/arm/boot/dts/msm8974-cdp.dtsi b/arch/arm/boot/dts/msm8974-cdp.dtsi
index 2919709..41e3783 100644
--- a/arch/arm/boot/dts/msm8974-cdp.dtsi
+++ b/arch/arm/boot/dts/msm8974-cdp.dtsi
@@ -13,7 +13,7 @@
/include/ "dsi-panel-toshiba-720p-video.dtsi"
/include/ "dsi-panel-orise-720p-video.dtsi"
/include/ "msm8974-leds.dtsi"
-/include/ "msm8974-camera-sensor-cdp-mtp.dtsi"
+/include/ "msm8974-camera-sensor-cdp.dtsi"
/ {
serial@f991e000 {
diff --git a/arch/arm/boot/dts/msm8974-mtp.dtsi b/arch/arm/boot/dts/msm8974-mtp.dtsi
index 8fa1d75..0090dfd 100644
--- a/arch/arm/boot/dts/msm8974-mtp.dtsi
+++ b/arch/arm/boot/dts/msm8974-mtp.dtsi
@@ -11,7 +11,7 @@
*/
/include/ "dsi-panel-toshiba-720p-video.dtsi"
-/include/ "msm8974-camera-sensor-cdp-mtp.dtsi"
+/include/ "msm8974-camera-sensor-mtp.dtsi"
/include/ "msm8974-leds.dtsi"
/ {
diff --git a/arch/arm/boot/dts/msm8974-rumi.dtsi b/arch/arm/boot/dts/msm8974-rumi.dtsi
index ce9d6c9..c569e58 100644
--- a/arch/arm/boot/dts/msm8974-rumi.dtsi
+++ b/arch/arm/boot/dts/msm8974-rumi.dtsi
@@ -11,7 +11,7 @@
*/
/include/ "msm8974-leds.dtsi"
-/include/ "msm8974-camera-sensor-cdp-mtp.dtsi"
+/include/ "msm8974-camera-sensor-cdp.dtsi"
/ {
timer {
diff --git a/arch/arm/boot/dts/msm8974-sim.dtsi b/arch/arm/boot/dts/msm8974-sim.dtsi
index a5606b8..786c50c 100644
--- a/arch/arm/boot/dts/msm8974-sim.dtsi
+++ b/arch/arm/boot/dts/msm8974-sim.dtsi
@@ -12,7 +12,7 @@
/include/ "dsi-panel-sim-video.dtsi"
/include/ "msm8974-leds.dtsi"
-/include/ "msm8974-camera-sensor-cdp-mtp.dtsi"
+/include/ "msm8974-camera-sensor-cdp.dtsi"
/ {
qcom,mdss_dsi@fd922800 {
diff --git a/arch/arm/mach-msm/include/mach/rpm-regulator-smd.h b/arch/arm/mach-msm/include/mach/rpm-regulator-smd.h
index 9e70510..cfe8ae7 100644
--- a/arch/arm/mach-msm/include/mach/rpm-regulator-smd.h
+++ b/arch/arm/mach-msm/include/mach/rpm-regulator-smd.h
@@ -38,6 +38,32 @@
RPM_REGULATOR_CORNER_SUPER_TURBO,
};
+/**
+ * enum rpm_regulator_mode - control mode for LDO or SMPS type regulators
+ * %RPM_REGULATOR_MODE_AUTO: For SMPS type regulators, use SMPS auto mode so
+ * that the hardware can automatically switch
+ * between PFM and PWM modes based on realtime
+ * load.
+ * LDO type regulators do not support this mode.
+ * %RPM_REGULATOR_MODE_IPEAK: For SMPS type regulators, use aggregated
+ * software current requests to determine
+ * usage of PFM or PWM mode.
+ * For LDO type regulators, use aggregated
+ * software current requests to determine
+ * usage of LPM or HPM mode.
+ * %RPM_REGULATOR_MODE_HPM: For SMPS type regulators, force the
+ * usage of PWM mode.
+ * For LDO type regulators, force the
+ * usage of HPM mode.
+ *
+ * These values should be used in calls to rpm_regulator_set_mode().
+ */
+enum rpm_regulator_mode {
+ RPM_REGULATOR_MODE_AUTO,
+ RPM_REGULATOR_MODE_IPEAK,
+ RPM_REGULATOR_MODE_HPM,
+};
+
#if defined(CONFIG_MSM_RPM_REGULATOR_SMD) || defined(CONFIG_MSM_RPM_REGULATOR)
struct rpm_regulator *rpm_regulator_get(struct device *dev, const char *supply);
@@ -71,6 +97,14 @@
static inline int __init rpm_regulator_smd_driver_init(void) { return 0; }
-#endif /* CONFIG_MSM_RPM_REGULATOR_SMD */
+#endif /* CONFIG_MSM_RPM_REGULATOR_SMD || CONFIG_MSM_RPM_REGULATOR */
+
+#ifdef CONFIG_MSM_RPM_REGULATOR_SMD
+int rpm_regulator_set_mode(struct rpm_regulator *regulator,
+ enum rpm_regulator_mode mode);
+#else
+static inline int rpm_regulator_set_mode(struct rpm_regulator *regulator,
+ enum rpm_regulator_mode mode) { return 0; }
+#endif
#endif
diff --git a/arch/arm/mach-msm/rpm-regulator-smd.c b/arch/arm/mach-msm/rpm-regulator-smd.c
index 55ce4b1..923e647 100644
--- a/arch/arm/mach-msm/rpm-regulator-smd.c
+++ b/arch/arm/mach-msm/rpm-regulator-smd.c
@@ -73,6 +73,17 @@
RPM_REGULATOR_PARAM_MAX,
};
+enum rpm_regulator_smps_mode {
+ RPM_REGULATOR_SMPS_MODE_AUTO = 0,
+ RPM_REGULATOR_SMPS_MODE_IPEAK = 1,
+ RPM_REGULATOR_SMPS_MODE_PWM = 2,
+};
+
+enum rpm_regulator_ldo_mode {
+ RPM_REGULATOR_LDO_MODE_IPEAK = 0,
+ RPM_REGULATOR_LDO_MODE_HPM = 1,
+};
+
#define RPM_SET_CONFIG_ACTIVE BIT(0)
#define RPM_SET_CONFIG_SLEEP BIT(1)
#define RPM_SET_CONFIG_BOTH (RPM_SET_CONFIG_ACTIVE \
@@ -118,6 +129,20 @@
PARAM(FLOOR_CORNER, 1, 1, 0, 0, "vfc", 0, 6, "qcom,init-voltage-floor-corner"),
};
+struct rpm_regulator_mode_map {
+ int ldo_mode;
+ int smps_mode;
+};
+
+static struct rpm_regulator_mode_map mode_mapping[] = {
+ [RPM_REGULATOR_MODE_AUTO]
+ = {-1, RPM_REGULATOR_SMPS_MODE_AUTO},
+ [RPM_REGULATOR_MODE_IPEAK]
+ = {RPM_REGULATOR_LDO_MODE_IPEAK, RPM_REGULATOR_SMPS_MODE_IPEAK},
+ [RPM_REGULATOR_MODE_HPM]
+ = {RPM_REGULATOR_LDO_MODE_HPM, RPM_REGULATOR_SMPS_MODE_PWM},
+};
+
struct rpm_vreg_request {
u32 param[RPM_REGULATOR_PARAM_MAX];
u32 valid;
@@ -1077,6 +1102,71 @@
}
EXPORT_SYMBOL_GPL(rpm_regulator_set_voltage);
+/**
+ * rpm_regulator_set_mode() - set regulator operating mode
+ * @regulator: RPM regulator handle
+ * @mode: operating mode requested for the regulator
+ *
+ * Requests that the mode of the regulator be set to the mode specified. This
+ * parameter is aggregated using a max function such that AUTO < IPEAK < HPM.
+ *
+ * Returns 0 on success or errno on failure.
+ */
+int rpm_regulator_set_mode(struct rpm_regulator *regulator,
+ enum rpm_regulator_mode mode)
+{
+ int index = 0;
+ u32 new_mode, prev_mode;
+ int rc;
+
+ rc = rpm_regulator_check_input(regulator);
+ if (rc)
+ return rc;
+
+ if (mode < 0 || mode >= ARRAY_SIZE(mode_mapping)) {
+ vreg_err(regulator, "invalid mode requested: %d\n", mode);
+ return -EINVAL;
+ }
+
+ switch (regulator->rpm_vreg->regulator_type) {
+ case RPM_REGULATOR_SMD_TYPE_SMPS:
+ index = RPM_REGULATOR_PARAM_MODE_SMPS;
+ new_mode = mode_mapping[mode].smps_mode;
+ break;
+ case RPM_REGULATOR_SMD_TYPE_LDO:
+ index = RPM_REGULATOR_PARAM_MODE_LDO;
+ new_mode = mode_mapping[mode].ldo_mode;
+ break;
+ default:
+ vreg_err(regulator, "unsupported regulator type: %d\n",
+ regulator->rpm_vreg->regulator_type);
+ return -EINVAL;
+ };
+
+ if (new_mode < params[index].min || new_mode > params[index].max) {
+ vreg_err(regulator, "invalid mode requested: %d for type: %d\n",
+ mode, regulator->rpm_vreg->regulator_type);
+ return -EINVAL;
+ }
+
+ rpm_vreg_lock(regulator->rpm_vreg);
+
+ prev_mode = regulator->req.param[index];
+ regulator->req.param[index] = new_mode;
+ regulator->req.modified |= BIT(index);
+
+ rc = rpm_vreg_aggregate_requests(regulator);
+ if (rc) {
+ vreg_err(regulator, "set mode failed, rc=%d", rc);
+ regulator->req.param[index] = prev_mode;
+ }
+
+ rpm_vreg_unlock(regulator->rpm_vreg);
+
+ return rc;
+}
+EXPORT_SYMBOL_GPL(rpm_regulator_set_mode);
+
static struct regulator_ops ldo_ops = {
.enable = rpm_vreg_enable,
.disable = rpm_vreg_disable,
diff --git a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
index 92f7463..e8480f7 100644
--- a/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
+++ b/drivers/media/dvb/dvb-core/dvb_ringbuffer.c
@@ -5,7 +5,7 @@
* Copyright (C) 2003 Oliver Endriss
* Copyright (C) 2004 Andrew de Quincey
*
- * Copyright (c) 2012, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
*
* based on code originally found in av7110.c & dvb_ci.c:
* Copyright (C) 1999-2003 Ralph Metzler
@@ -334,7 +334,10 @@
idx = (idx + curpktlen + DVB_RINGBUFFER_PKTHDRSIZE) % rbuf->size;
}
- consumed = (idx - rbuf->pread) % rbuf->size;
+ if (idx >= rbuf->pread)
+ consumed = idx - rbuf->pread;
+ else
+ consumed = rbuf->size - (rbuf->pread - idx);
while((dvb_ringbuffer_avail(rbuf) - consumed) > DVB_RINGBUFFER_PKTHDRSIZE) {
diff --git a/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c b/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c
index 22ce35b..d30afb2 100644
--- a/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c
+++ b/drivers/media/platform/msm/camera_v2/ispif/msm_ispif.c
@@ -503,6 +503,13 @@
BUG_ON(!ispif);
BUG_ON(!params);
+ if (ispif->ispif_state != ISPIF_POWER_UP) {
+ pr_err("%s: ispif invalid state %d\n", __func__,
+ ispif->ispif_state);
+ rc = -EPERM;
+ return rc;
+ }
+
rc = msm_ispif_clk_enable(ispif, params, 1);
if (rc < 0) {
pr_err("%s: unable to enable clocks", __func__);
@@ -653,6 +660,13 @@
BUG_ON(!ispif);
BUG_ON(!params);
+ if (ispif->ispif_state != ISPIF_POWER_UP) {
+ pr_err("%s: ispif invalid state %d\n", __func__,
+ ispif->ispif_state);
+ rc = -EPERM;
+ return rc;
+ }
+
msm_ispif_intf_cmd(ispif, ISPIF_INTF_CMD_DISABLE_IMMEDIATELY, params);
/* after stop the interface we need to unmask the CID enable bits */
@@ -671,6 +685,13 @@
{
int rc;
+ if (ispif->ispif_state != ISPIF_POWER_UP) {
+ pr_err("%s: ispif invalid state %d\n", __func__,
+ ispif->ispif_state);
+ rc = -EPERM;
+ return rc;
+ }
+
rc = msm_ispif_clk_enable(ispif, params, 1);
if (rc < 0) {
pr_err("%s: unable to enable clocks", __func__);
@@ -703,6 +724,13 @@
BUG_ON(!params);
+ if (ispif->ispif_state != ISPIF_POWER_UP) {
+ pr_err("%s: ispif invalid state %d\n", __func__,
+ ispif->ispif_state);
+ rc = -EPERM;
+ return rc;
+ }
+
rc = msm_ispif_clk_enable(ispif, params, 1);
if (rc < 0) {
pr_err("%s: unable to enable clocks", __func__);
diff --git a/drivers/media/platform/msm/dvb/demux/mpq_dmx_plugin_common.c b/drivers/media/platform/msm/dvb/demux/mpq_dmx_plugin_common.c
index b6bc0d7..6775a23 100644
--- a/drivers/media/platform/msm/dvb/demux/mpq_dmx_plugin_common.c
+++ b/drivers/media/platform/msm/dvb/demux/mpq_dmx_plugin_common.c
@@ -1220,6 +1220,8 @@
{
struct mpq_demux *mpq_demux = feed->demux->priv;
+ MPQ_DVB_DBG_PRINT("%s: cookie=%d\n", __func__, cookie);
+
if (cookie < 0) {
MPQ_DVB_ERR_PRINT("%s: invalid cookie parameter\n", __func__);
return -EINVAL;
@@ -2441,9 +2443,15 @@
data->data_length = 0;
data->buf.handle = packet->raw_data_handle;
+
/* this has to succeed when called here, after packet was written */
data->buf.cookie = mpq_streambuffer_pkt_next(stream_buffer,
feed_data->last_pkt_index, &len);
+ if (data->buf.cookie < 0)
+ MPQ_DVB_DBG_PRINT(
+ "%s: received invalid packet index %d\n",
+ __func__, data->buf.cookie);
+
data->buf.offset = packet->raw_data_offset;
data->buf.len = packet->raw_data_len;
data->buf.pts_exists = pts_dts->pts_exist;
@@ -2459,6 +2467,8 @@
/* save for next time: */
feed_data->last_pkt_index = data->buf.cookie;
+ MPQ_DVB_DBG_PRINT("%s: cookie=%d\n", __func__, data->buf.cookie);
+
/* reset counters */
feed_data->ts_packets_num = 0;
feed_data->ts_dropped_bytes = 0;
@@ -4235,7 +4245,12 @@
__func__, ret);
}
mpq_dmx_update_decoder_stat(mpq_demux);
- mpq_streambuffer_pkt_write(sbuf, &packet, (u8 *)&meta_data);
+ if (mpq_streambuffer_pkt_write(sbuf,
+ &packet,
+ (u8 *)&meta_data) < 0)
+ MPQ_DVB_ERR_PRINT(
+ "%s: Couldn't write packet. Should never happen\n",
+ __func__);
mpq_dmx_prepare_es_event_data(
&packet, &meta_data, &mpq_feed->video_info,
diff --git a/drivers/misc/tsif.c b/drivers/misc/tsif.c
index 05f6c86..f80fbcc 100644
--- a/drivers/misc/tsif.c
+++ b/drivers/misc/tsif.c
@@ -216,8 +216,6 @@
tsif_device->tsif_clk = clk_get(&tsif_device->pdev->dev,
pdata->tsif_clk);
if (IS_ERR(tsif_device->tsif_clk)) {
- dev_err(&tsif_device->pdev->dev, "failed to get %s\n",
- pdata->tsif_clk);
rc = PTR_ERR(tsif_device->tsif_clk);
tsif_device->tsif_clk = NULL;
goto ret;
@@ -227,8 +225,6 @@
tsif_device->tsif_pclk = clk_get(&tsif_device->pdev->dev,
pdata->tsif_pclk);
if (IS_ERR(tsif_device->tsif_pclk)) {
- dev_err(&tsif_device->pdev->dev, "failed to get %s\n",
- pdata->tsif_pclk);
rc = PTR_ERR(tsif_device->tsif_pclk);
tsif_device->tsif_pclk = NULL;
goto ret;
@@ -238,8 +234,6 @@
tsif_device->tsif_ref_clk = clk_get(&tsif_device->pdev->dev,
pdata->tsif_ref_clk);
if (IS_ERR(tsif_device->tsif_ref_clk)) {
- dev_err(&tsif_device->pdev->dev, "failed to get %s\n",
- pdata->tsif_ref_clk);
rc = PTR_ERR(tsif_device->tsif_ref_clk);
tsif_device->tsif_ref_clk = NULL;
goto ret;
@@ -1431,7 +1425,8 @@
(unsigned long)tsif_device);
tasklet_init(&tsif_device->clocks_off, tsif_clocks_off,
(unsigned long)tsif_device);
- if (tsif_get_clocks(tsif_device))
+ rc = tsif_get_clocks(tsif_device);
+ if (rc)
goto err_clocks;
/* map I/O memory */
tsif_device->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/misc/tspp.c b/drivers/misc/tspp.c
index 3b226ad..dbb4f5e 100644
--- a/drivers/misc/tspp.c
+++ b/drivers/misc/tspp.c
@@ -2839,8 +2839,6 @@
if (data->tsif_pclk) {
device->tsif_pclk = clk_get(&pdev->dev, data->tsif_pclk);
if (IS_ERR(device->tsif_pclk)) {
- pr_err("tspp: failed to get %s",
- data->tsif_pclk);
rc = PTR_ERR(device->tsif_pclk);
device->tsif_pclk = NULL;
goto err_pclock;
@@ -2849,8 +2847,6 @@
if (data->tsif_ref_clk) {
device->tsif_ref_clk = clk_get(&pdev->dev, data->tsif_ref_clk);
if (IS_ERR(device->tsif_ref_clk)) {
- pr_err("tspp: failed to get %s",
- data->tsif_ref_clk);
rc = PTR_ERR(device->tsif_ref_clk);
device->tsif_ref_clk = NULL;
goto err_refclock;
diff --git a/drivers/platform/msm/ipa/ipa_dp.c b/drivers/platform/msm/ipa/ipa_dp.c
index bd1da2c..c74fe8a 100644
--- a/drivers/platform/msm/ipa/ipa_dp.c
+++ b/drivers/platform/msm/ipa/ipa_dp.c
@@ -259,7 +259,7 @@
if (unlikely(!in_atomic))
mem_flag = GFP_KERNEL;
- transfer.iovec = dma_alloc_coherent(NULL, size, &dma_addr, 0);
+ transfer.iovec = dma_alloc_coherent(NULL, size, &dma_addr, mem_flag);
transfer.iovec_phys = dma_addr;
transfer.iovec_count = num_desc;
spin_lock_irqsave(&sys->spinlock, irq_flags);
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 84e099d..f551e75 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -170,6 +170,9 @@
* %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS,
* %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY,
* %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT.
+ * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS.
+ * The channel to use can be set on the interface or be given using the
+ * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width.
* @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP
* @NL80211_CMD_STOP_AP: Stop AP operation on the given interface
* @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP
@@ -554,6 +557,57 @@
* @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
* No Acknowledgement Policy should be applied.
*
+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
+ * independently of the userspace SME, send this event indicating
+ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
+ * attributes determining channel width.
+ *
+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier. It must have been created with
+ * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the
+ * P2P Device can be used for P2P operations, e.g. remain-on-channel and
+ * public action frame TX.
+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by
+ * its %NL80211_ATTR_WDEV identifier.
+ *
+ * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to
+ * notify userspace that AP has rejected the connection request from a
+ * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON
+ * is used for this.
+ *
+ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames
+ * for IBSS or MESH vif.
+ *
+ * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control.
+ * This is to be used with the drivers advertising the support of MAC
+ * address based access control. List of MAC addresses is passed in
+ * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in
+ * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it
+ * is not already done. The new list will replace any existing list. Driver
+ * will clear its ACL when the list of MAC addresses passed is empty. This
+ * command is used in AP/P2P GO mode. Driver has to make sure to clear its
+ * ACL list during %NL80211_CMD_STOP_AP.
+ *
+ * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once
+ * a radar is detected or the channel availability scan (CAC) has finished
+ * or was aborted, or a radar was detected, usermode will be notified with
+ * this event. This command is also used to notify userspace about radars
+ * while operating on this channel.
+ * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
+ * event.
+ *
+ * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
+ * i.e. features for the nl80211 protocol rather than device features.
+ * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
+ *
+ * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
+ * Information Element to the WLAN driver
+ *
+ * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
+ * to the supplicant. This will carry the target AP's MAC address along
+ * with the relevant Information Elements. This event is used to report
+ * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -695,6 +749,25 @@
NL80211_CMD_SET_NOACK_MAP,
+
+ NL80211_CMD_CH_SWITCH_NOTIFY,
+
+ NL80211_CMD_START_P2P_DEVICE,
+ NL80211_CMD_STOP_P2P_DEVICE,
+
+ NL80211_CMD_CONN_FAILED,
+
+ NL80211_CMD_SET_MCAST_RATE,
+
+ NL80211_CMD_SET_MAC_ACL,
+
+ NL80211_CMD_RADAR_DETECT,
+
+ NL80211_CMD_GET_PROTOCOL_FEATURES,
+
+ NL80211_CMD_UPDATE_FT_IES,
+ NL80211_CMD_FT_EVENT,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1275,6 +1348,18 @@
* advertised to the driver, e.g., to enable TDLS off channel operations
* and PU-APSD.
*
+ * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
+ * &enum nl80211_protocol_features, the attribute is a u32.
+ *
+ * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
+ * receiving the data for a single wiphy split across multiple
+ * messages, given with wiphy dump message
+ *
+ * @NL80211_ATTR_MDID: Mobility Domain Identifier
+ *
+ * @NL80211_ATTR_IE_RIC: Resource Information Container Information
+ * Element
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1561,6 +1646,15 @@
NL80211_ATTR_STA_CAPABILITY,
NL80211_ATTR_STA_EXT_CAPABILITY,
+ NL80211_ATTR_PROTOCOL_FEATURES,
+ NL80211_ATTR_SPLIT_WIPHY_DUMP,
+
+ NL80211_ATTR_DISABLE_VHT,
+ NL80211_ATTR_VHT_CAPABILITY_MASK,
+
+ NL80211_ATTR_MDID,
+ NL80211_ATTR_IE_RIC,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index bfa0eca..dc29eb9 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1361,6 +1361,21 @@
};
/**
+ * struct cfg80211_update_ft_ies_params - FT IE Information
+ *
+ * This structure provides information needed to update the fast transition IE
+ *
+ * @md: The Mobility Domain ID, 2 Octet value
+ * @ie: Fast Transition IEs
+ * @ie_len: Length of ft_ie in octets
+ */
+struct cfg80211_update_ft_ies_params {
+ u16 md;
+ const u8 *ie;
+ size_t ie_len;
+};
+
+/**
* struct cfg80211_ops - backend description for wireless configuration
*
* This struct is registered by fullmac card drivers and/or wireless stacks
@@ -1740,6 +1755,8 @@
u16 noack_map);
struct ieee80211_channel *(*get_channel)(struct wiphy *wiphy);
+ int (*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_update_ft_ies_params *ftie);
};
/*
@@ -3410,6 +3427,31 @@
*/
u16 cfg80211_calculate_bitrate(struct rate_info *rate);
+/**
+ * struct cfg80211_ft_event - FT Information Elements
+ * @ies: FT IEs
+ * @ies_len: length of the FT IE in bytes
+ * @target_ap: target AP's MAC address
+ * @ric_ies: RIC IE
+ * @ric_ies_len: length of the RIC IE in bytes
+ */
+struct cfg80211_ft_event_params {
+ const u8 *ies;
+ size_t ies_len;
+ const u8 *target_ap;
+ const u8 *ric_ies;
+ size_t ric_ies_len;
+};
+
+/**
+ * cfg80211_ft_event - notify userspace about FT IE and RIC IE
+ * @netdev: network device
+ * @ft_event: IE information
+ */
+void cfg80211_ft_event(struct net_device *netdev,
+ struct cfg80211_ft_event_params *ft_event);
+
+
/* Logging, debugging and troubleshooting/diagnostic helpers. */
/* wiphy_printk helpers, similar to dev_printk */
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 5097036..e1fa62e 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -212,6 +212,14 @@
[NL80211_ATTR_VHT_CAPABILITY] = { .len = NL80211_VHT_CAPABILITY_LEN },
[NL80211_ATTR_STA_CAPABILITY] = { .type = NLA_U16 },
[NL80211_ATTR_STA_EXT_CAPABILITY] = { .type = NLA_BINARY, },
+ [NL80211_ATTR_SPLIT_WIPHY_DUMP] = { .type = NLA_FLAG, },
+ [NL80211_ATTR_DISABLE_VHT] = { .type = NLA_FLAG },
+ [NL80211_ATTR_VHT_CAPABILITY_MASK] = {
+ .len = NL80211_VHT_CAPABILITY_LEN,
+ },
+ [NL80211_ATTR_MDID] = { .type = NLA_U16 },
+ [NL80211_ATTR_IE_RIC] = { .type = NLA_BINARY,
+ .len = IEEE80211_MAX_DATA_LEN },
};
/* policy for the key attributes */
@@ -6445,6 +6453,27 @@
return 0;
}
+static int nl80211_update_ft_ies(struct sk_buff *skb, struct genl_info *info)
+{
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ struct cfg80211_update_ft_ies_params ft_params;
+ struct net_device *dev = info->user_ptr[1];
+
+ if (!rdev->ops->update_ft_ies)
+ return -EOPNOTSUPP;
+
+ if (!info->attrs[NL80211_ATTR_MDID] ||
+ !is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
+ return -EINVAL;
+
+ memset(&ft_params, 0, sizeof(ft_params));
+ ft_params.md = nla_get_u16(info->attrs[NL80211_ATTR_MDID]);
+ ft_params.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
+ ft_params.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
+
+ return rdev->ops->update_ft_ies(&rdev->wiphy, dev, &ft_params);
+}
+
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@@ -7033,6 +7062,14 @@
.internal_flags = NL80211_FLAG_NEED_NETDEV |
NL80211_FLAG_NEED_RTNL,
},
+ {
+ .cmd = NL80211_CMD_UPDATE_FT_IES,
+ .doit = nl80211_update_ft_ies,
+ .policy = nl80211_policy,
+ .flags = GENL_ADMIN_PERM,
+ .internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+ NL80211_FLAG_NEED_RTNL,
+ },
};
@@ -8270,6 +8307,48 @@
.notifier_call = nl80211_netlink_notify,
};
+void cfg80211_ft_event(struct net_device *netdev,
+ struct cfg80211_ft_event_params *ft_event)
+{
+ struct wiphy *wiphy = netdev->ieee80211_ptr->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+ struct sk_buff *msg;
+ void *hdr;
+ int err;
+
+ if (!ft_event->target_ap)
+ return;
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg)
+ return;
+
+ hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_FT_EVENT);
+ if (!hdr) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+ nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+ nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, ft_event->target_ap);
+ if (ft_event->ies)
+ nla_put(msg, NL80211_ATTR_IE, ft_event->ies_len, ft_event->ies);
+ if (ft_event->ric_ies)
+ nla_put(msg, NL80211_ATTR_IE_RIC, ft_event->ric_ies_len,
+ ft_event->ric_ies);
+
+ err = genlmsg_end(msg, hdr);
+ if (err < 0) {
+ nlmsg_free(msg);
+ return;
+ }
+
+ genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+ nl80211_mlme_mcgrp.id, GFP_KERNEL);
+}
+EXPORT_SYMBOL(cfg80211_ft_event);
+
/* initialisation/exit functions */
int nl80211_init(void)