tg3: Fix APE mutex init and use

APE mutex register blocks are shared by all ports of multiport devices.
For some mutexing purposes, each function is assigned their own
register.  For other cases, each function is assigned its own request
and grant bits of a single register.  For the latter cases, the tg3
driver is incorrectly allowing each function to use the same set of
grant / request bits.  This patch fixes the code so that each function
uses the appropriate bitset.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 161cbbb..3590163 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -628,19 +628,23 @@
 		regbase = TG3_APE_PER_LOCK_GRANT;
 
 	/* Make sure the driver hasn't any stale locks. */
-	for (i = 0; i < 8; i++) {
-		if (i == TG3_APE_LOCK_GPIO)
-			continue;
-		tg3_ape_write32(tp, regbase + 4 * i, APE_LOCK_GRANT_DRIVER);
+	for (i = TG3_APE_LOCK_PHY0; i <= TG3_APE_LOCK_GPIO; i++) {
+		switch (i) {
+		case TG3_APE_LOCK_PHY0:
+		case TG3_APE_LOCK_PHY1:
+		case TG3_APE_LOCK_PHY2:
+		case TG3_APE_LOCK_PHY3:
+			bit = APE_LOCK_GRANT_DRIVER;
+			break;
+		default:
+			if (!tp->pci_fn)
+				bit = APE_LOCK_GRANT_DRIVER;
+			else
+				bit = 1 << tp->pci_fn;
+		}
+		tg3_ape_write32(tp, regbase + 4 * i, bit);
 	}
 
-	/* Clear the correct bit of the GPIO lock too. */
-	if (!tp->pci_fn)
-		bit = APE_LOCK_GRANT_DRIVER;
-	else
-		bit = 1 << tp->pci_fn;
-
-	tg3_ape_write32(tp, regbase + 4 * TG3_APE_LOCK_GPIO, bit);
 }
 
 static int tg3_ape_lock(struct tg3 *tp, int locknum)
@@ -658,6 +662,10 @@
 			return 0;
 	case TG3_APE_LOCK_GRC:
 	case TG3_APE_LOCK_MEM:
+		if (!tp->pci_fn)
+			bit = APE_LOCK_REQ_DRIVER;
+		else
+			bit = 1 << tp->pci_fn;
 		break;
 	default:
 		return -EINVAL;
@@ -673,11 +681,6 @@
 
 	off = 4 * locknum;
 
-	if (locknum != TG3_APE_LOCK_GPIO || !tp->pci_fn)
-		bit = APE_LOCK_REQ_DRIVER;
-	else
-		bit = 1 << tp->pci_fn;
-
 	tg3_ape_write32(tp, req + off, bit);
 
 	/* Wait for up to 1 millisecond to acquire lock. */
@@ -710,6 +713,10 @@
 			return;
 	case TG3_APE_LOCK_GRC:
 	case TG3_APE_LOCK_MEM:
+		if (!tp->pci_fn)
+			bit = APE_LOCK_GRANT_DRIVER;
+		else
+			bit = 1 << tp->pci_fn;
 		break;
 	default:
 		return;
@@ -720,11 +727,6 @@
 	else
 		gnt = TG3_APE_PER_LOCK_GRANT;
 
-	if (locknum != TG3_APE_LOCK_GPIO || !tp->pci_fn)
-		bit = APE_LOCK_GRANT_DRIVER;
-	else
-		bit = 1 << tp->pci_fn;
-
 	tg3_ape_write32(tp, gnt + 4 * locknum, bit);
 }