| /* |
| * Copyright (c) 2008-2009 Atheros Communications Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include "ath9k.h" |
| |
| static char *dev_info = "ath9k"; |
| |
| MODULE_AUTHOR("Atheros Communications"); |
| MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards."); |
| MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| |
| static unsigned int ath9k_debug = ATH_DBG_DEFAULT; |
| module_param_named(debug, ath9k_debug, uint, 0); |
| MODULE_PARM_DESC(debug, "Debugging mask"); |
| |
| int modparam_nohwcrypt; |
| module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); |
| MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption"); |
| |
| /* We use the hw_value as an index into our private channel structure */ |
| |
| #define CHAN2G(_freq, _idx) { \ |
| .center_freq = (_freq), \ |
| .hw_value = (_idx), \ |
| .max_power = 20, \ |
| } |
| |
| #define CHAN5G(_freq, _idx) { \ |
| .band = IEEE80211_BAND_5GHZ, \ |
| .center_freq = (_freq), \ |
| .hw_value = (_idx), \ |
| .max_power = 20, \ |
| } |
| |
| /* Some 2 GHz radios are actually tunable on 2312-2732 |
| * on 5 MHz steps, we support the channels which we know |
| * we have calibration data for all cards though to make |
| * this static */ |
| static struct ieee80211_channel ath9k_2ghz_chantable[] = { |
| CHAN2G(2412, 0), /* Channel 1 */ |
| CHAN2G(2417, 1), /* Channel 2 */ |
| CHAN2G(2422, 2), /* Channel 3 */ |
| CHAN2G(2427, 3), /* Channel 4 */ |
| CHAN2G(2432, 4), /* Channel 5 */ |
| CHAN2G(2437, 5), /* Channel 6 */ |
| CHAN2G(2442, 6), /* Channel 7 */ |
| CHAN2G(2447, 7), /* Channel 8 */ |
| CHAN2G(2452, 8), /* Channel 9 */ |
| CHAN2G(2457, 9), /* Channel 10 */ |
| CHAN2G(2462, 10), /* Channel 11 */ |
| CHAN2G(2467, 11), /* Channel 12 */ |
| CHAN2G(2472, 12), /* Channel 13 */ |
| CHAN2G(2484, 13), /* Channel 14 */ |
| }; |
| |
| /* Some 5 GHz radios are actually tunable on XXXX-YYYY |
| * on 5 MHz steps, we support the channels which we know |
| * we have calibration data for all cards though to make |
| * this static */ |
| static struct ieee80211_channel ath9k_5ghz_chantable[] = { |
| /* _We_ call this UNII 1 */ |
| CHAN5G(5180, 14), /* Channel 36 */ |
| CHAN5G(5200, 15), /* Channel 40 */ |
| CHAN5G(5220, 16), /* Channel 44 */ |
| CHAN5G(5240, 17), /* Channel 48 */ |
| /* _We_ call this UNII 2 */ |
| CHAN5G(5260, 18), /* Channel 52 */ |
| CHAN5G(5280, 19), /* Channel 56 */ |
| CHAN5G(5300, 20), /* Channel 60 */ |
| CHAN5G(5320, 21), /* Channel 64 */ |
| /* _We_ call this "Middle band" */ |
| CHAN5G(5500, 22), /* Channel 100 */ |
| CHAN5G(5520, 23), /* Channel 104 */ |
| CHAN5G(5540, 24), /* Channel 108 */ |
| CHAN5G(5560, 25), /* Channel 112 */ |
| CHAN5G(5580, 26), /* Channel 116 */ |
| CHAN5G(5600, 27), /* Channel 120 */ |
| CHAN5G(5620, 28), /* Channel 124 */ |
| CHAN5G(5640, 29), /* Channel 128 */ |
| CHAN5G(5660, 30), /* Channel 132 */ |
| CHAN5G(5680, 31), /* Channel 136 */ |
| CHAN5G(5700, 32), /* Channel 140 */ |
| /* _We_ call this UNII 3 */ |
| CHAN5G(5745, 33), /* Channel 149 */ |
| CHAN5G(5765, 34), /* Channel 153 */ |
| CHAN5G(5785, 35), /* Channel 157 */ |
| CHAN5G(5805, 36), /* Channel 161 */ |
| CHAN5G(5825, 37), /* Channel 165 */ |
| }; |
| |
| /* Atheros hardware rate code addition for short premble */ |
| #define SHPCHECK(__hw_rate, __flags) \ |
| ((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0) |
| |
| #define RATE(_bitrate, _hw_rate, _flags) { \ |
| .bitrate = (_bitrate), \ |
| .flags = (_flags), \ |
| .hw_value = (_hw_rate), \ |
| .hw_value_short = (SHPCHECK(_hw_rate, _flags)) \ |
| } |
| |
| static struct ieee80211_rate ath9k_legacy_rates[] = { |
| RATE(10, 0x1b, 0), |
| RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(60, 0x0b, 0), |
| RATE(90, 0x0f, 0), |
| RATE(120, 0x0a, 0), |
| RATE(180, 0x0e, 0), |
| RATE(240, 0x09, 0), |
| RATE(360, 0x0d, 0), |
| RATE(480, 0x08, 0), |
| RATE(540, 0x0c, 0), |
| }; |
| |
| static void ath9k_deinit_softc(struct ath_softc *sc); |
| |
| /* |
| * Read and write, they both share the same lock. We do this to serialize |
| * reads and writes on Atheros 802.11n PCI devices only. This is required |
| * as the FIFO on these devices can only accept sanely 2 requests. |
| */ |
| |
| static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset) |
| { |
| struct ath_hw *ah = (struct ath_hw *) hw_priv; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath_softc *sc = (struct ath_softc *) common->priv; |
| |
| if (ah->config.serialize_regmode == SER_REG_MODE_ON) { |
| unsigned long flags; |
| spin_lock_irqsave(&sc->sc_serial_rw, flags); |
| iowrite32(val, sc->mem + reg_offset); |
| spin_unlock_irqrestore(&sc->sc_serial_rw, flags); |
| } else |
| iowrite32(val, sc->mem + reg_offset); |
| } |
| |
| static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset) |
| { |
| struct ath_hw *ah = (struct ath_hw *) hw_priv; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath_softc *sc = (struct ath_softc *) common->priv; |
| u32 val; |
| |
| if (ah->config.serialize_regmode == SER_REG_MODE_ON) { |
| unsigned long flags; |
| spin_lock_irqsave(&sc->sc_serial_rw, flags); |
| val = ioread32(sc->mem + reg_offset); |
| spin_unlock_irqrestore(&sc->sc_serial_rw, flags); |
| } else |
| val = ioread32(sc->mem + reg_offset); |
| return val; |
| } |
| |
| static const struct ath_ops ath9k_common_ops = { |
| .read = ath9k_ioread32, |
| .write = ath9k_iowrite32, |
| }; |
| |
| /**************************/ |
| /* Initialization */ |
| /**************************/ |
| |
| static void setup_ht_cap(struct ath_softc *sc, |
| struct ieee80211_sta_ht_cap *ht_info) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| u8 tx_streams, rx_streams; |
| |
| ht_info->ht_supported = true; |
| ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | |
| IEEE80211_HT_CAP_SM_PS | |
| IEEE80211_HT_CAP_SGI_40 | |
| IEEE80211_HT_CAP_DSSSCCK40; |
| |
| ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; |
| ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8; |
| |
| /* set up supported mcs set */ |
| memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); |
| tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ? |
| 1 : 2; |
| rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ? |
| 1 : 2; |
| |
| if (tx_streams != rx_streams) { |
| ath_print(common, ATH_DBG_CONFIG, |
| "TX streams %d, RX streams: %d\n", |
| tx_streams, rx_streams); |
| ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; |
| ht_info->mcs.tx_params |= ((tx_streams - 1) << |
| IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); |
| } |
| |
| ht_info->mcs.rx_mask[0] = 0xff; |
| if (rx_streams >= 2) |
| ht_info->mcs.rx_mask[1] = 0xff; |
| |
| ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; |
| } |
| |
| static int ath9k_reg_notifier(struct wiphy *wiphy, |
| struct regulatory_request *request) |
| { |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct ath_wiphy *aphy = hw->priv; |
| struct ath_softc *sc = aphy->sc; |
| struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah); |
| |
| return ath_reg_notifier_apply(wiphy, request, reg); |
| } |
| |
| /* |
| * This function will allocate both the DMA descriptor structure, and the |
| * buffers it contains. These are used to contain the descriptors used |
| * by the system. |
| */ |
| int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, |
| struct list_head *head, const char *name, |
| int nbuf, int ndesc) |
| { |
| #define DS2PHYS(_dd, _ds) \ |
| ((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc)) |
| #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0) |
| #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096) |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| struct ath_desc *ds; |
| struct ath_buf *bf; |
| int i, bsize, error; |
| |
| ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n", |
| name, nbuf, ndesc); |
| |
| INIT_LIST_HEAD(head); |
| /* ath_desc must be a multiple of DWORDs */ |
| if ((sizeof(struct ath_desc) % 4) != 0) { |
| ath_print(common, ATH_DBG_FATAL, |
| "ath_desc not DWORD aligned\n"); |
| BUG_ON((sizeof(struct ath_desc) % 4) != 0); |
| error = -ENOMEM; |
| goto fail; |
| } |
| |
| dd->dd_desc_len = sizeof(struct ath_desc) * nbuf * ndesc; |
| |
| /* |
| * Need additional DMA memory because we can't use |
| * descriptors that cross the 4K page boundary. Assume |
| * one skipped descriptor per 4K page. |
| */ |
| if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { |
| u32 ndesc_skipped = |
| ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); |
| u32 dma_len; |
| |
| while (ndesc_skipped) { |
| dma_len = ndesc_skipped * sizeof(struct ath_desc); |
| dd->dd_desc_len += dma_len; |
| |
| ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); |
| }; |
| } |
| |
| /* allocate descriptors */ |
| dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len, |
| &dd->dd_desc_paddr, GFP_KERNEL); |
| if (dd->dd_desc == NULL) { |
| error = -ENOMEM; |
| goto fail; |
| } |
| ds = dd->dd_desc; |
| ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n", |
| name, ds, (u32) dd->dd_desc_len, |
| ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); |
| |
| /* allocate buffers */ |
| bsize = sizeof(struct ath_buf) * nbuf; |
| bf = kzalloc(bsize, GFP_KERNEL); |
| if (bf == NULL) { |
| error = -ENOMEM; |
| goto fail2; |
| } |
| dd->dd_bufptr = bf; |
| |
| for (i = 0; i < nbuf; i++, bf++, ds += ndesc) { |
| bf->bf_desc = ds; |
| bf->bf_daddr = DS2PHYS(dd, ds); |
| |
| if (!(sc->sc_ah->caps.hw_caps & |
| ATH9K_HW_CAP_4KB_SPLITTRANS)) { |
| /* |
| * Skip descriptor addresses which can cause 4KB |
| * boundary crossing (addr + length) with a 32 dword |
| * descriptor fetch. |
| */ |
| while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { |
| BUG_ON((caddr_t) bf->bf_desc >= |
| ((caddr_t) dd->dd_desc + |
| dd->dd_desc_len)); |
| |
| ds += ndesc; |
| bf->bf_desc = ds; |
| bf->bf_daddr = DS2PHYS(dd, ds); |
| } |
| } |
| list_add_tail(&bf->list, head); |
| } |
| return 0; |
| fail2: |
| dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, |
| dd->dd_desc_paddr); |
| fail: |
| memset(dd, 0, sizeof(*dd)); |
| return error; |
| #undef ATH_DESC_4KB_BOUND_CHECK |
| #undef ATH_DESC_4KB_BOUND_NUM_SKIPPED |
| #undef DS2PHYS |
| } |
| |
| static void ath9k_init_crypto(struct ath_softc *sc) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| int i = 0; |
| |
| /* Get the hardware key cache size. */ |
| common->keymax = sc->sc_ah->caps.keycache_size; |
| if (common->keymax > ATH_KEYMAX) { |
| ath_print(common, ATH_DBG_ANY, |
| "Warning, using only %u entries in %u key cache\n", |
| ATH_KEYMAX, common->keymax); |
| common->keymax = ATH_KEYMAX; |
| } |
| |
| /* |
| * Reset the key cache since some parts do not |
| * reset the contents on initial power up. |
| */ |
| for (i = 0; i < common->keymax; i++) |
| ath9k_hw_keyreset(sc->sc_ah, (u16) i); |
| |
| if (ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_CIPHER, |
| ATH9K_CIPHER_TKIP, NULL)) { |
| /* |
| * Whether we should enable h/w TKIP MIC. |
| * XXX: if we don't support WME TKIP MIC, then we wouldn't |
| * report WMM capable, so it's always safe to turn on |
| * TKIP MIC in this case. |
| */ |
| ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_TKIP_MIC, 0, 1, NULL); |
| } |
| |
| /* |
| * Check whether the separate key cache entries |
| * are required to handle both tx+rx MIC keys. |
| * With split mic keys the number of stations is limited |
| * to 27 otherwise 59. |
| */ |
| if (ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_CIPHER, |
| ATH9K_CIPHER_TKIP, NULL) |
| && ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_CIPHER, |
| ATH9K_CIPHER_MIC, NULL) |
| && ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_TKIP_SPLIT, |
| 0, NULL)) |
| common->splitmic = 1; |
| |
| /* turn on mcast key search if possible */ |
| if (!ath9k_hw_getcapability(sc->sc_ah, ATH9K_CAP_MCAST_KEYSRCH, 0, NULL)) |
| (void)ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_MCAST_KEYSRCH, |
| 1, 1, NULL); |
| |
| } |
| |
| static int ath9k_init_btcoex(struct ath_softc *sc) |
| { |
| int r, qnum; |
| |
| switch (sc->sc_ah->btcoex_hw.scheme) { |
| case ATH_BTCOEX_CFG_NONE: |
| break; |
| case ATH_BTCOEX_CFG_2WIRE: |
| ath9k_hw_btcoex_init_2wire(sc->sc_ah); |
| break; |
| case ATH_BTCOEX_CFG_3WIRE: |
| ath9k_hw_btcoex_init_3wire(sc->sc_ah); |
| r = ath_init_btcoex_timer(sc); |
| if (r) |
| return -1; |
| qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE); |
| ath9k_hw_init_btcoex_hw(sc->sc_ah, qnum); |
| sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW; |
| break; |
| default: |
| WARN_ON(1); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int ath9k_init_queues(struct ath_softc *sc) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| int i = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++) |
| sc->tx.hwq_map[i] = -1; |
| |
| sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah); |
| if (sc->beacon.beaconq == -1) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to setup a beacon xmit queue\n"); |
| goto err; |
| } |
| |
| sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); |
| if (sc->beacon.cabq == NULL) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to setup CAB xmit queue\n"); |
| goto err; |
| } |
| |
| sc->config.cabqReadytime = ATH_CABQ_READY_TIME; |
| ath_cabq_update(sc); |
| |
| if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to setup xmit queue for BK traffic\n"); |
| goto err; |
| } |
| |
| if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to setup xmit queue for BE traffic\n"); |
| goto err; |
| } |
| if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to setup xmit queue for VI traffic\n"); |
| goto err; |
| } |
| if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to setup xmit queue for VO traffic\n"); |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) |
| if (ATH_TXQ_SETUP(sc, i)) |
| ath_tx_cleanupq(sc, &sc->tx.txq[i]); |
| |
| return -EIO; |
| } |
| |
| static void ath9k_init_channels_rates(struct ath_softc *sc) |
| { |
| if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) { |
| sc->sbands[IEEE80211_BAND_2GHZ].channels = ath9k_2ghz_chantable; |
| sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; |
| sc->sbands[IEEE80211_BAND_2GHZ].n_channels = |
| ARRAY_SIZE(ath9k_2ghz_chantable); |
| sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates; |
| sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates = |
| ARRAY_SIZE(ath9k_legacy_rates); |
| } |
| |
| if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) { |
| sc->sbands[IEEE80211_BAND_5GHZ].channels = ath9k_5ghz_chantable; |
| sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; |
| sc->sbands[IEEE80211_BAND_5GHZ].n_channels = |
| ARRAY_SIZE(ath9k_5ghz_chantable); |
| sc->sbands[IEEE80211_BAND_5GHZ].bitrates = |
| ath9k_legacy_rates + 4; |
| sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates = |
| ARRAY_SIZE(ath9k_legacy_rates) - 4; |
| } |
| } |
| |
| static void ath9k_init_misc(struct ath_softc *sc) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| int i = 0; |
| |
| common->ani.noise_floor = ATH_DEFAULT_NOISE_FLOOR; |
| setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc); |
| |
| sc->config.txpowlimit = ATH_TXPOWER_MAX; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { |
| sc->sc_flags |= SC_OP_TXAGGR; |
| sc->sc_flags |= SC_OP_RXAGGR; |
| } |
| |
| common->tx_chainmask = sc->sc_ah->caps.tx_chainmask; |
| common->rx_chainmask = sc->sc_ah->caps.rx_chainmask; |
| |
| ath9k_hw_setcapability(sc->sc_ah, ATH9K_CAP_DIVERSITY, 1, true, NULL); |
| sc->rx.defant = ath9k_hw_getdefantenna(sc->sc_ah); |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) |
| memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN); |
| |
| sc->beacon.slottime = ATH9K_SLOT_TIME_9; |
| |
| for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) { |
| sc->beacon.bslot[i] = NULL; |
| sc->beacon.bslot_aphy[i] = NULL; |
| } |
| } |
| |
| static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid, |
| const struct ath_bus_ops *bus_ops) |
| { |
| struct ath_hw *ah = NULL; |
| struct ath_common *common; |
| int ret = 0, i; |
| int csz = 0; |
| |
| ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL); |
| if (!ah) |
| return -ENOMEM; |
| |
| ah->hw_version.devid = devid; |
| ah->hw_version.subsysid = subsysid; |
| sc->sc_ah = ah; |
| |
| common = ath9k_hw_common(ah); |
| common->ops = &ath9k_common_ops; |
| common->bus_ops = bus_ops; |
| common->ah = ah; |
| common->hw = sc->hw; |
| common->priv = sc; |
| common->debug_mask = ath9k_debug; |
| |
| spin_lock_init(&sc->wiphy_lock); |
| spin_lock_init(&sc->sc_resetlock); |
| spin_lock_init(&sc->sc_serial_rw); |
| spin_lock_init(&sc->sc_pm_lock); |
| mutex_init(&sc->mutex); |
| tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); |
| tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet, |
| (unsigned long)sc); |
| |
| /* |
| * Cache line size is used to size and align various |
| * structures used to communicate with the hardware. |
| */ |
| ath_read_cachesize(common, &csz); |
| common->cachelsz = csz << 2; /* convert to bytes */ |
| |
| ret = ath9k_hw_init(ah); |
| if (ret) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to initialize hardware; " |
| "initialization status: %d\n", ret); |
| goto err_hw; |
| } |
| |
| ret = ath9k_init_debug(ah); |
| if (ret) { |
| ath_print(common, ATH_DBG_FATAL, |
| "Unable to create debugfs files\n"); |
| goto err_debug; |
| } |
| |
| ret = ath9k_init_queues(sc); |
| if (ret) |
| goto err_queues; |
| |
| ret = ath9k_init_btcoex(sc); |
| if (ret) |
| goto err_btcoex; |
| |
| ath9k_init_crypto(sc); |
| ath9k_init_channels_rates(sc); |
| ath9k_init_misc(sc); |
| |
| return 0; |
| |
| err_btcoex: |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) |
| if (ATH_TXQ_SETUP(sc, i)) |
| ath_tx_cleanupq(sc, &sc->tx.txq[i]); |
| err_queues: |
| ath9k_exit_debug(ah); |
| err_debug: |
| ath9k_hw_deinit(ah); |
| err_hw: |
| tasklet_kill(&sc->intr_tq); |
| tasklet_kill(&sc->bcon_tasklet); |
| |
| kfree(ah); |
| sc->sc_ah = NULL; |
| |
| return ret; |
| } |
| |
| void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| |
| hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | |
| IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | |
| IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_SUPPORTS_PS | |
| IEEE80211_HW_PS_NULLFUNC_STACK | |
| IEEE80211_HW_SPECTRUM_MGMT | |
| IEEE80211_HW_REPORTS_TX_ACK_STATUS; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) |
| hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; |
| |
| if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt) |
| hw->flags |= IEEE80211_HW_MFP_CAPABLE; |
| |
| hw->wiphy->interface_modes = |
| BIT(NL80211_IFTYPE_AP) | |
| BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_ADHOC) | |
| BIT(NL80211_IFTYPE_MESH_POINT); |
| |
| hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; |
| |
| hw->queues = 4; |
| hw->max_rates = 4; |
| hw->channel_change_time = 5000; |
| hw->max_listen_interval = 10; |
| hw->max_rate_tries = 10; |
| hw->sta_data_size = sizeof(struct ath_node); |
| hw->vif_data_size = sizeof(struct ath_vif); |
| |
| hw->rate_control_algorithm = "ath9k_rate_control"; |
| |
| if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) |
| hw->wiphy->bands[IEEE80211_BAND_2GHZ] = |
| &sc->sbands[IEEE80211_BAND_2GHZ]; |
| if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) |
| hw->wiphy->bands[IEEE80211_BAND_5GHZ] = |
| &sc->sbands[IEEE80211_BAND_5GHZ]; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { |
| if (test_bit(ATH9K_MODE_11G, sc->sc_ah->caps.wireless_modes)) |
| setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap); |
| if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes)) |
| setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap); |
| } |
| |
| SET_IEEE80211_PERM_ADDR(hw, common->macaddr); |
| } |
| |
| int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid, |
| const struct ath_bus_ops *bus_ops) |
| { |
| struct ieee80211_hw *hw = sc->hw; |
| struct ath_common *common; |
| struct ath_hw *ah; |
| int error = 0; |
| struct ath_regulatory *reg; |
| |
| /* Bring up device */ |
| error = ath9k_init_softc(devid, sc, subsysid, bus_ops); |
| if (error != 0) |
| goto error_init; |
| |
| ah = sc->sc_ah; |
| common = ath9k_hw_common(ah); |
| ath9k_set_hw_capab(sc, hw); |
| |
| /* Initialize regulatory */ |
| error = ath_regd_init(&common->regulatory, sc->hw->wiphy, |
| ath9k_reg_notifier); |
| if (error) |
| goto error_regd; |
| |
| reg = &common->regulatory; |
| |
| /* Setup TX DMA */ |
| error = ath_tx_init(sc, ATH_TXBUF); |
| if (error != 0) |
| goto error_tx; |
| |
| /* Setup RX DMA */ |
| error = ath_rx_init(sc, ATH_RXBUF); |
| if (error != 0) |
| goto error_rx; |
| |
| /* Register with mac80211 */ |
| error = ieee80211_register_hw(hw); |
| if (error) |
| goto error_register; |
| |
| /* Handle world regulatory */ |
| if (!ath_is_world_regd(reg)) { |
| error = regulatory_hint(hw->wiphy, reg->alpha2); |
| if (error) |
| goto error_world; |
| } |
| |
| INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work); |
| INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work); |
| sc->wiphy_scheduler_int = msecs_to_jiffies(500); |
| |
| ath_init_leds(sc); |
| ath_start_rfkill_poll(sc); |
| |
| return 0; |
| |
| error_world: |
| ieee80211_unregister_hw(hw); |
| error_register: |
| ath_rx_cleanup(sc); |
| error_rx: |
| ath_tx_cleanup(sc); |
| error_tx: |
| /* Nothing */ |
| error_regd: |
| ath9k_deinit_softc(sc); |
| error_init: |
| return error; |
| } |
| |
| /*****************************/ |
| /* De-Initialization */ |
| /*****************************/ |
| |
| static void ath9k_deinit_softc(struct ath_softc *sc) |
| { |
| int i = 0; |
| |
| if ((sc->btcoex.no_stomp_timer) && |
| sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE) |
| ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer); |
| |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) |
| if (ATH_TXQ_SETUP(sc, i)) |
| ath_tx_cleanupq(sc, &sc->tx.txq[i]); |
| |
| ath9k_exit_debug(sc->sc_ah); |
| ath9k_hw_deinit(sc->sc_ah); |
| |
| tasklet_kill(&sc->intr_tq); |
| tasklet_kill(&sc->bcon_tasklet); |
| |
| kfree(sc->sc_ah); |
| sc->sc_ah = NULL; |
| } |
| |
| void ath9k_deinit_device(struct ath_softc *sc) |
| { |
| struct ieee80211_hw *hw = sc->hw; |
| int i = 0; |
| |
| ath9k_ps_wakeup(sc); |
| |
| wiphy_rfkill_stop_polling(sc->hw->wiphy); |
| ath_deinit_leds(sc); |
| |
| for (i = 0; i < sc->num_sec_wiphy; i++) { |
| struct ath_wiphy *aphy = sc->sec_wiphy[i]; |
| if (aphy == NULL) |
| continue; |
| sc->sec_wiphy[i] = NULL; |
| ieee80211_unregister_hw(aphy->hw); |
| ieee80211_free_hw(aphy->hw); |
| } |
| kfree(sc->sec_wiphy); |
| |
| ieee80211_unregister_hw(hw); |
| ath_rx_cleanup(sc); |
| ath_tx_cleanup(sc); |
| ath9k_deinit_softc(sc); |
| } |
| |
| void ath_descdma_cleanup(struct ath_softc *sc, |
| struct ath_descdma *dd, |
| struct list_head *head) |
| { |
| dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, |
| dd->dd_desc_paddr); |
| |
| INIT_LIST_HEAD(head); |
| kfree(dd->dd_bufptr); |
| memset(dd, 0, sizeof(*dd)); |
| } |
| |
| /************************/ |
| /* Module Hooks */ |
| /************************/ |
| |
| static int __init ath9k_init(void) |
| { |
| int error; |
| |
| /* Register rate control algorithm */ |
| error = ath_rate_control_register(); |
| if (error != 0) { |
| printk(KERN_ERR |
| "ath9k: Unable to register rate control " |
| "algorithm: %d\n", |
| error); |
| goto err_out; |
| } |
| |
| error = ath9k_debug_create_root(); |
| if (error) { |
| printk(KERN_ERR |
| "ath9k: Unable to create debugfs root: %d\n", |
| error); |
| goto err_rate_unregister; |
| } |
| |
| error = ath_pci_init(); |
| if (error < 0) { |
| printk(KERN_ERR |
| "ath9k: No PCI devices found, driver not installed.\n"); |
| error = -ENODEV; |
| goto err_remove_root; |
| } |
| |
| error = ath_ahb_init(); |
| if (error < 0) { |
| error = -ENODEV; |
| goto err_pci_exit; |
| } |
| |
| return 0; |
| |
| err_pci_exit: |
| ath_pci_exit(); |
| |
| err_remove_root: |
| ath9k_debug_remove_root(); |
| err_rate_unregister: |
| ath_rate_control_unregister(); |
| err_out: |
| return error; |
| } |
| module_init(ath9k_init); |
| |
| static void __exit ath9k_exit(void) |
| { |
| ath_ahb_exit(); |
| ath_pci_exit(); |
| ath9k_debug_remove_root(); |
| ath_rate_control_unregister(); |
| printk(KERN_INFO "%s: Driver unloaded\n", dev_info); |
| } |
| module_exit(ath9k_exit); |