ixgbe: Add FW detection and warning for 82599 SFP+ adapters
82599 has a FW running that helps manage the internal SFI PHY. There are
also a number of pre-production samples of these SFI-based devices in the
field. This patch adds a check to look for the firmware running on all
SFP+ based adapters, and displays a warning to the system log if a
pre-production adapter is identified. The driver will continue loading
though, with no functional degradation.
Also remove an old function prototype from ixgbe_82599.c that isn't being
used.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index ca7c5d5..543a606 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2728,6 +2728,15 @@
case IXGBE_ERR_MASTER_REQUESTS_PENDING:
dev_err(&adapter->pdev->dev, "master disable timed out\n");
break;
+ case IXGBE_ERR_EEPROM_VERSION:
+ /* We are running on a pre-production device, log a warning */
+ dev_warn(&adapter->pdev->dev, "This device is a pre-production "
+ "adapter/LOM. Please be aware there may be issues "
+ "associated with your hardware. If you are "
+ "experiencing problems please contact your Intel or "
+ "hardware representative who provided you with this "
+ "hardware.\n");
+ break;
default:
dev_err(&adapter->pdev->dev, "Hardware Error: %d\n", err);
}
@@ -5608,8 +5617,17 @@
hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version);
/* reset the hardware with the new settings */
- hw->mac.ops.start_hw(hw);
+ err = hw->mac.ops.start_hw(hw);
+ if (err == IXGBE_ERR_EEPROM_VERSION) {
+ /* We are running on a pre-production device, log a warning */
+ dev_warn(&pdev->dev, "This device is a pre-production "
+ "adapter/LOM. Please be aware there may be issues "
+ "associated with your hardware. If you are "
+ "experiencing problems please contact your Intel or "
+ "hardware representative who provided you with this "
+ "hardware.\n");
+ }
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
if (err)