| /* |
| * Copyright © 2006 Keith Packard |
| * Copyright © 2007-2008 Dave Airlie |
| * Copyright © 2007-2008 Intel Corporation |
| * Jesse Barnes <jesse.barnes@intel.com> |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| #ifndef __DRM_CRTC_H__ |
| #define __DRM_CRTC_H__ |
| |
| #include <linux/i2c.h> |
| #include <linux/spinlock.h> |
| #include <linux/types.h> |
| #include <linux/idr.h> |
| |
| #include <linux/fb.h> |
| |
| struct drm_device; |
| struct drm_mode_set; |
| struct drm_framebuffer; |
| |
| |
| #define DRM_MODE_OBJECT_CRTC 0xcccccccc |
| #define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0 |
| #define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0 |
| #define DRM_MODE_OBJECT_MODE 0xdededede |
| #define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0 |
| #define DRM_MODE_OBJECT_FB 0xfbfbfbfb |
| #define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb |
| |
| struct drm_mode_object { |
| uint32_t id; |
| uint32_t type; |
| }; |
| |
| /* |
| * Note on terminology: here, for brevity and convenience, we refer to connector |
| * control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS, |
| * DVI, etc. And 'screen' refers to the whole of the visible display, which |
| * may span multiple monitors (and therefore multiple CRTC and connector |
| * structures). |
| */ |
| |
| enum drm_mode_status { |
| MODE_OK = 0, /* Mode OK */ |
| MODE_HSYNC, /* hsync out of range */ |
| MODE_VSYNC, /* vsync out of range */ |
| MODE_H_ILLEGAL, /* mode has illegal horizontal timings */ |
| MODE_V_ILLEGAL, /* mode has illegal horizontal timings */ |
| MODE_BAD_WIDTH, /* requires an unsupported linepitch */ |
| MODE_NOMODE, /* no mode with a maching name */ |
| MODE_NO_INTERLACE, /* interlaced mode not supported */ |
| MODE_NO_DBLESCAN, /* doublescan mode not supported */ |
| MODE_NO_VSCAN, /* multiscan mode not supported */ |
| MODE_MEM, /* insufficient video memory */ |
| MODE_VIRTUAL_X, /* mode width too large for specified virtual size */ |
| MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */ |
| MODE_MEM_VIRT, /* insufficient video memory given virtual size */ |
| MODE_NOCLOCK, /* no fixed clock available */ |
| MODE_CLOCK_HIGH, /* clock required is too high */ |
| MODE_CLOCK_LOW, /* clock required is too low */ |
| MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */ |
| MODE_BAD_HVALUE, /* horizontal timing was out of range */ |
| MODE_BAD_VVALUE, /* vertical timing was out of range */ |
| MODE_BAD_VSCAN, /* VScan value out of range */ |
| MODE_HSYNC_NARROW, /* horizontal sync too narrow */ |
| MODE_HSYNC_WIDE, /* horizontal sync too wide */ |
| MODE_HBLANK_NARROW, /* horizontal blanking too narrow */ |
| MODE_HBLANK_WIDE, /* horizontal blanking too wide */ |
| MODE_VSYNC_NARROW, /* vertical sync too narrow */ |
| MODE_VSYNC_WIDE, /* vertical sync too wide */ |
| MODE_VBLANK_NARROW, /* vertical blanking too narrow */ |
| MODE_VBLANK_WIDE, /* vertical blanking too wide */ |
| MODE_PANEL, /* exceeds panel dimensions */ |
| MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */ |
| MODE_ONE_WIDTH, /* only one width is supported */ |
| MODE_ONE_HEIGHT, /* only one height is supported */ |
| MODE_ONE_SIZE, /* only one resolution is supported */ |
| MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */ |
| MODE_UNVERIFIED = -3, /* mode needs to reverified */ |
| MODE_BAD = -2, /* unspecified reason */ |
| MODE_ERROR = -1 /* error condition */ |
| }; |
| |
| #define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \ |
| DRM_MODE_TYPE_CRTC_C) |
| |
| #define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \ |
| .name = nm, .status = 0, .type = (t), .clock = (c), \ |
| .hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \ |
| .htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \ |
| .vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \ |
| .vscan = (vs), .flags = (f), .vrefresh = 0 |
| |
| #define CRTC_INTERLACE_HALVE_V 0x1 /* halve V values for interlacing */ |
| |
| struct drm_display_mode { |
| /* Header */ |
| struct list_head head; |
| struct drm_mode_object base; |
| |
| char name[DRM_DISPLAY_MODE_LEN]; |
| |
| int connector_count; |
| enum drm_mode_status status; |
| int type; |
| |
| /* Proposed mode values */ |
| int clock; |
| int hdisplay; |
| int hsync_start; |
| int hsync_end; |
| int htotal; |
| int hskew; |
| int vdisplay; |
| int vsync_start; |
| int vsync_end; |
| int vtotal; |
| int vscan; |
| unsigned int flags; |
| |
| /* Addressable image size (may be 0 for projectors, etc.) */ |
| int width_mm; |
| int height_mm; |
| |
| /* Actual mode we give to hw */ |
| int clock_index; |
| int synth_clock; |
| int crtc_hdisplay; |
| int crtc_hblank_start; |
| int crtc_hblank_end; |
| int crtc_hsync_start; |
| int crtc_hsync_end; |
| int crtc_htotal; |
| int crtc_hskew; |
| int crtc_vdisplay; |
| int crtc_vblank_start; |
| int crtc_vblank_end; |
| int crtc_vsync_start; |
| int crtc_vsync_end; |
| int crtc_vtotal; |
| int crtc_hadjusted; |
| int crtc_vadjusted; |
| |
| /* Driver private mode info */ |
| int private_size; |
| int *private; |
| int private_flags; |
| |
| int vrefresh; |
| float hsync; |
| }; |
| |
| enum drm_connector_status { |
| connector_status_connected = 1, |
| connector_status_disconnected = 2, |
| connector_status_unknown = 3, |
| }; |
| |
| enum subpixel_order { |
| SubPixelUnknown = 0, |
| SubPixelHorizontalRGB, |
| SubPixelHorizontalBGR, |
| SubPixelVerticalRGB, |
| SubPixelVerticalBGR, |
| SubPixelNone, |
| }; |
| |
| |
| /* |
| * Describes a given display (e.g. CRT or flat panel) and its limitations. |
| */ |
| struct drm_display_info { |
| char name[DRM_DISPLAY_INFO_LEN]; |
| /* Input info */ |
| bool serration_vsync; |
| bool sync_on_green; |
| bool composite_sync; |
| bool separate_syncs; |
| bool blank_to_black; |
| unsigned char video_level; |
| bool digital; |
| /* Physical size */ |
| unsigned int width_mm; |
| unsigned int height_mm; |
| |
| /* Display parameters */ |
| unsigned char gamma; /* FIXME: storage format */ |
| bool gtf_supported; |
| bool standard_color; |
| enum { |
| monochrome = 0, |
| rgb, |
| other, |
| unknown, |
| } display_type; |
| bool active_off_supported; |
| bool suspend_supported; |
| bool standby_supported; |
| |
| /* Color info FIXME: storage format */ |
| unsigned short redx, redy; |
| unsigned short greenx, greeny; |
| unsigned short bluex, bluey; |
| unsigned short whitex, whitey; |
| |
| /* Clock limits FIXME: storage format */ |
| unsigned int min_vfreq, max_vfreq; |
| unsigned int min_hfreq, max_hfreq; |
| unsigned int pixel_clock; |
| |
| /* White point indices FIXME: storage format */ |
| unsigned int wpx1, wpy1; |
| unsigned int wpgamma1; |
| unsigned int wpx2, wpy2; |
| unsigned int wpgamma2; |
| |
| enum subpixel_order subpixel_order; |
| |
| char *raw_edid; /* if any */ |
| }; |
| |
| struct drm_framebuffer_funcs { |
| void (*destroy)(struct drm_framebuffer *framebuffer); |
| int (*create_handle)(struct drm_framebuffer *fb, |
| struct drm_file *file_priv, |
| unsigned int *handle); |
| }; |
| |
| struct drm_framebuffer { |
| struct drm_device *dev; |
| struct list_head head; |
| struct drm_mode_object base; |
| const struct drm_framebuffer_funcs *funcs; |
| unsigned int pitch; |
| unsigned int width; |
| unsigned int height; |
| /* depth can be 15 or 16 */ |
| unsigned int depth; |
| int bits_per_pixel; |
| int flags; |
| void *fbdev; |
| u32 pseudo_palette[17]; |
| struct list_head filp_head; |
| /* if you are using the helper */ |
| void *helper_private; |
| }; |
| |
| struct drm_property_blob { |
| struct drm_mode_object base; |
| struct list_head head; |
| unsigned int length; |
| void *data; |
| }; |
| |
| struct drm_property_enum { |
| uint64_t value; |
| struct list_head head; |
| char name[DRM_PROP_NAME_LEN]; |
| }; |
| |
| struct drm_property { |
| struct list_head head; |
| struct drm_mode_object base; |
| uint32_t flags; |
| char name[DRM_PROP_NAME_LEN]; |
| uint32_t num_values; |
| uint64_t *values; |
| |
| struct list_head enum_blob_list; |
| }; |
| |
| struct drm_crtc; |
| struct drm_connector; |
| struct drm_encoder; |
| |
| /** |
| * drm_crtc_funcs - control CRTCs for a given device |
| * @dpms: control display power levels |
| * @save: save CRTC state |
| * @resore: restore CRTC state |
| * @lock: lock the CRTC |
| * @unlock: unlock the CRTC |
| * @shadow_allocate: allocate shadow pixmap |
| * @shadow_create: create shadow pixmap for rotation support |
| * @shadow_destroy: free shadow pixmap |
| * @mode_fixup: fixup proposed mode |
| * @mode_set: set the desired mode on the CRTC |
| * @gamma_set: specify color ramp for CRTC |
| * @destroy: deinit and free object. |
| * |
| * The drm_crtc_funcs structure is the central CRTC management structure |
| * in the DRM. Each CRTC controls one or more connectors (note that the name |
| * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. |
| * connectors, not just CRTs). |
| * |
| * Each driver is responsible for filling out this structure at startup time, |
| * in addition to providing other modesetting features, like i2c and DDC |
| * bus accessors. |
| */ |
| struct drm_crtc_funcs { |
| /* Save CRTC state */ |
| void (*save)(struct drm_crtc *crtc); /* suspend? */ |
| /* Restore CRTC state */ |
| void (*restore)(struct drm_crtc *crtc); /* resume? */ |
| |
| /* cursor controls */ |
| int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, |
| uint32_t handle, uint32_t width, uint32_t height); |
| int (*cursor_move)(struct drm_crtc *crtc, int x, int y); |
| |
| /* Set gamma on the CRTC */ |
| void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, |
| uint32_t size); |
| /* Object destroy routine */ |
| void (*destroy)(struct drm_crtc *crtc); |
| |
| int (*set_config)(struct drm_mode_set *set); |
| }; |
| |
| /** |
| * drm_crtc - central CRTC control structure |
| * @enabled: is this CRTC enabled? |
| * @x: x position on screen |
| * @y: y position on screen |
| * @desired_mode: new desired mode |
| * @desired_x: desired x for desired_mode |
| * @desired_y: desired y for desired_mode |
| * @funcs: CRTC control functions |
| * |
| * Each CRTC may have one or more connectors associated with it. This structure |
| * allows the CRTC to be controlled. |
| */ |
| struct drm_crtc { |
| struct drm_device *dev; |
| struct list_head head; |
| |
| struct drm_mode_object base; |
| |
| /* framebuffer the connector is currently bound to */ |
| struct drm_framebuffer *fb; |
| |
| bool enabled; |
| |
| struct drm_display_mode mode; |
| |
| int x, y; |
| struct drm_display_mode *desired_mode; |
| int desired_x, desired_y; |
| const struct drm_crtc_funcs *funcs; |
| |
| /* CRTC gamma size for reporting to userspace */ |
| uint32_t gamma_size; |
| uint16_t *gamma_store; |
| |
| /* if you are using the helper */ |
| void *helper_private; |
| }; |
| |
| |
| /** |
| * drm_connector_funcs - control connectors on a given device |
| * @dpms: set power state (see drm_crtc_funcs above) |
| * @save: save connector state |
| * @restore: restore connector state |
| * @mode_valid: is this mode valid on the given connector? |
| * @mode_fixup: try to fixup proposed mode for this connector |
| * @mode_set: set this mode |
| * @detect: is this connector active? |
| * @get_modes: get mode list for this connector |
| * @set_property: property for this connector may need update |
| * @destroy: make object go away |
| * @force: notify the driver the connector is forced on |
| * |
| * Each CRTC may have one or more connectors attached to it. The functions |
| * below allow the core DRM code to control connectors, enumerate available modes, |
| * etc. |
| */ |
| struct drm_connector_funcs { |
| void (*dpms)(struct drm_connector *connector, int mode); |
| void (*save)(struct drm_connector *connector); |
| void (*restore)(struct drm_connector *connector); |
| enum drm_connector_status (*detect)(struct drm_connector *connector); |
| int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height); |
| int (*set_property)(struct drm_connector *connector, struct drm_property *property, |
| uint64_t val); |
| void (*destroy)(struct drm_connector *connector); |
| void (*force)(struct drm_connector *connector); |
| }; |
| |
| struct drm_encoder_funcs { |
| void (*destroy)(struct drm_encoder *encoder); |
| }; |
| |
| #define DRM_CONNECTOR_MAX_UMODES 16 |
| #define DRM_CONNECTOR_MAX_PROPERTY 16 |
| #define DRM_CONNECTOR_LEN 32 |
| #define DRM_CONNECTOR_MAX_ENCODER 2 |
| |
| /** |
| * drm_encoder - central DRM encoder structure |
| */ |
| struct drm_encoder { |
| struct drm_device *dev; |
| struct list_head head; |
| |
| struct drm_mode_object base; |
| int encoder_type; |
| uint32_t possible_crtcs; |
| uint32_t possible_clones; |
| |
| struct drm_crtc *crtc; |
| const struct drm_encoder_funcs *funcs; |
| void *helper_private; |
| }; |
| |
| enum drm_connector_force { |
| DRM_FORCE_UNSPECIFIED, |
| DRM_FORCE_OFF, |
| DRM_FORCE_ON, /* force on analog part normally */ |
| DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */ |
| }; |
| |
| /** |
| * drm_connector - central DRM connector control structure |
| * @crtc: CRTC this connector is currently connected to, NULL if none |
| * @interlace_allowed: can this connector handle interlaced modes? |
| * @doublescan_allowed: can this connector handle doublescan? |
| * @available_modes: modes available on this connector (from get_modes() + user) |
| * @initial_x: initial x position for this connector |
| * @initial_y: initial y position for this connector |
| * @status: connector connected? |
| * @funcs: connector control functions |
| * |
| * Each connector may be connected to one or more CRTCs, or may be clonable by |
| * another connector if they can share a CRTC. Each connector also has a specific |
| * position in the broader display (referred to as a 'screen' though it could |
| * span multiple monitors). |
| */ |
| struct drm_connector { |
| struct drm_device *dev; |
| struct device kdev; |
| struct device_attribute *attr; |
| struct list_head head; |
| |
| struct drm_mode_object base; |
| |
| int connector_type; |
| int connector_type_id; |
| bool interlace_allowed; |
| bool doublescan_allowed; |
| struct list_head modes; /* list of modes on this connector */ |
| |
| int initial_x, initial_y; |
| enum drm_connector_status status; |
| |
| /* these are modes added by probing with DDC or the BIOS */ |
| struct list_head probed_modes; |
| |
| struct drm_display_info display_info; |
| const struct drm_connector_funcs *funcs; |
| |
| struct list_head user_modes; |
| struct drm_property_blob *edid_blob_ptr; |
| u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY]; |
| uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY]; |
| |
| /* requested DPMS state */ |
| int dpms; |
| |
| void *helper_private; |
| |
| /* forced on connector */ |
| enum drm_connector_force force; |
| uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER]; |
| uint32_t force_encoder_id; |
| struct drm_encoder *encoder; /* currently active encoder */ |
| void *fb_helper_private; |
| }; |
| |
| /** |
| * struct drm_mode_set |
| * |
| * Represents a single crtc the connectors that it drives with what mode |
| * and from which framebuffer it scans out from. |
| * |
| * This is used to set modes. |
| */ |
| struct drm_mode_set { |
| struct list_head head; |
| |
| struct drm_framebuffer *fb; |
| struct drm_crtc *crtc; |
| struct drm_display_mode *mode; |
| |
| uint32_t x; |
| uint32_t y; |
| |
| struct drm_connector **connectors; |
| size_t num_connectors; |
| }; |
| |
| /** |
| * struct drm_mode_config_funcs - configure CRTCs for a given screen layout |
| * @resize: adjust CRTCs as necessary for the proposed layout |
| * |
| * Currently only a resize hook is available. DRM will call back into the |
| * driver with a new screen width and height. If the driver can't support |
| * the proposed size, it can return false. Otherwise it should adjust |
| * the CRTC<->connector mappings as needed and update its view of the screen. |
| */ |
| struct drm_mode_config_funcs { |
| struct drm_framebuffer *(*fb_create)(struct drm_device *dev, struct drm_file *file_priv, struct drm_mode_fb_cmd *mode_cmd); |
| int (*fb_changed)(struct drm_device *dev); |
| }; |
| |
| struct drm_mode_group { |
| uint32_t num_crtcs; |
| uint32_t num_encoders; |
| uint32_t num_connectors; |
| |
| /* list of object IDs for this group */ |
| uint32_t *id_list; |
| }; |
| |
| /** |
| * drm_mode_config - Mode configuration control structure |
| * |
| */ |
| struct drm_mode_config { |
| struct mutex mutex; /* protects configuration (mode lists etc.) */ |
| struct mutex idr_mutex; /* for IDR management */ |
| struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ |
| /* this is limited to one for now */ |
| int num_fb; |
| struct list_head fb_list; |
| int num_connector; |
| struct list_head connector_list; |
| int num_encoder; |
| struct list_head encoder_list; |
| |
| int num_crtc; |
| struct list_head crtc_list; |
| |
| struct list_head property_list; |
| |
| /* in-kernel framebuffers - hung of filp_head in drm_framebuffer */ |
| struct list_head fb_kernel_list; |
| |
| int min_width, min_height; |
| int max_width, max_height; |
| struct drm_mode_config_funcs *funcs; |
| resource_size_t fb_base; |
| |
| /* pointers to standard properties */ |
| struct list_head property_blob_list; |
| struct drm_property *edid_property; |
| struct drm_property *dpms_property; |
| |
| /* DVI-I properties */ |
| struct drm_property *dvi_i_subconnector_property; |
| struct drm_property *dvi_i_select_subconnector_property; |
| |
| /* TV properties */ |
| struct drm_property *tv_subconnector_property; |
| struct drm_property *tv_select_subconnector_property; |
| struct drm_property *tv_mode_property; |
| struct drm_property *tv_left_margin_property; |
| struct drm_property *tv_right_margin_property; |
| struct drm_property *tv_top_margin_property; |
| struct drm_property *tv_bottom_margin_property; |
| struct drm_property *tv_brightness_property; |
| struct drm_property *tv_contrast_property; |
| struct drm_property *tv_flicker_reduction_property; |
| struct drm_property *tv_overscan_property; |
| struct drm_property *tv_saturation_property; |
| struct drm_property *tv_hue_property; |
| |
| /* Optional properties */ |
| struct drm_property *scaling_mode_property; |
| struct drm_property *dithering_mode_property; |
| }; |
| |
| #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) |
| #define obj_to_connector(x) container_of(x, struct drm_connector, base) |
| #define obj_to_encoder(x) container_of(x, struct drm_encoder, base) |
| #define obj_to_mode(x) container_of(x, struct drm_display_mode, base) |
| #define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) |
| #define obj_to_property(x) container_of(x, struct drm_property, base) |
| #define obj_to_blob(x) container_of(x, struct drm_property_blob, base) |
| |
| |
| extern void drm_crtc_init(struct drm_device *dev, |
| struct drm_crtc *crtc, |
| const struct drm_crtc_funcs *funcs); |
| extern void drm_crtc_cleanup(struct drm_crtc *crtc); |
| |
| extern void drm_connector_init(struct drm_device *dev, |
| struct drm_connector *connector, |
| const struct drm_connector_funcs *funcs, |
| int connector_type); |
| |
| extern void drm_connector_cleanup(struct drm_connector *connector); |
| |
| extern void drm_encoder_init(struct drm_device *dev, |
| struct drm_encoder *encoder, |
| const struct drm_encoder_funcs *funcs, |
| int encoder_type); |
| |
| extern void drm_encoder_cleanup(struct drm_encoder *encoder); |
| |
| extern char *drm_get_connector_name(struct drm_connector *connector); |
| extern char *drm_get_dpms_name(int val); |
| extern char *drm_get_dvi_i_subconnector_name(int val); |
| extern char *drm_get_dvi_i_select_name(int val); |
| extern char *drm_get_tv_subconnector_name(int val); |
| extern char *drm_get_tv_select_name(int val); |
| extern void drm_fb_release(struct drm_file *file_priv); |
| extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group); |
| extern struct edid *drm_get_edid(struct drm_connector *connector, |
| struct i2c_adapter *adapter); |
| extern int drm_do_probe_ddc_edid(struct i2c_adapter *adapter, |
| unsigned char *buf, int len); |
| extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid); |
| extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode); |
| extern void drm_mode_remove(struct drm_connector *connector, struct drm_display_mode *mode); |
| extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev, |
| struct drm_display_mode *mode); |
| extern void drm_mode_debug_printmodeline(struct drm_display_mode *mode); |
| extern void drm_mode_config_init(struct drm_device *dev); |
| extern void drm_mode_config_cleanup(struct drm_device *dev); |
| extern void drm_mode_set_name(struct drm_display_mode *mode); |
| extern bool drm_mode_equal(struct drm_display_mode *mode1, struct drm_display_mode *mode2); |
| extern int drm_mode_width(struct drm_display_mode *mode); |
| extern int drm_mode_height(struct drm_display_mode *mode); |
| |
| /* for us by fb module */ |
| extern int drm_mode_attachmode_crtc(struct drm_device *dev, |
| struct drm_crtc *crtc, |
| struct drm_display_mode *mode); |
| extern int drm_mode_detachmode_crtc(struct drm_device *dev, struct drm_display_mode *mode); |
| |
| extern struct drm_display_mode *drm_mode_create(struct drm_device *dev); |
| extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode); |
| extern void drm_mode_list_concat(struct list_head *head, |
| struct list_head *new); |
| extern void drm_mode_validate_size(struct drm_device *dev, |
| struct list_head *mode_list, |
| int maxX, int maxY, int maxPitch); |
| extern void drm_mode_prune_invalid(struct drm_device *dev, |
| struct list_head *mode_list, bool verbose); |
| extern void drm_mode_sort(struct list_head *mode_list); |
| extern int drm_mode_vrefresh(struct drm_display_mode *mode); |
| extern void drm_mode_set_crtcinfo(struct drm_display_mode *p, |
| int adjust_flags); |
| extern void drm_mode_connector_list_update(struct drm_connector *connector); |
| extern int drm_mode_connector_update_edid_property(struct drm_connector *connector, |
| struct edid *edid); |
| extern int drm_connector_property_set_value(struct drm_connector *connector, |
| struct drm_property *property, |
| uint64_t value); |
| extern int drm_connector_property_get_value(struct drm_connector *connector, |
| struct drm_property *property, |
| uint64_t *value); |
| extern struct drm_display_mode *drm_crtc_mode_create(struct drm_device *dev); |
| extern void drm_framebuffer_set_object(struct drm_device *dev, |
| unsigned long handle); |
| extern int drm_framebuffer_init(struct drm_device *dev, |
| struct drm_framebuffer *fb, |
| const struct drm_framebuffer_funcs *funcs); |
| extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb); |
| extern int drmfb_probe(struct drm_device *dev, struct drm_crtc *crtc); |
| extern int drmfb_remove(struct drm_device *dev, struct drm_framebuffer *fb); |
| extern void drm_crtc_probe_connector_modes(struct drm_device *dev, int maxX, int maxY); |
| extern bool drm_crtc_in_use(struct drm_crtc *crtc); |
| |
| extern int drm_connector_attach_property(struct drm_connector *connector, |
| struct drm_property *property, uint64_t init_val); |
| extern struct drm_property *drm_property_create(struct drm_device *dev, int flags, |
| const char *name, int num_values); |
| extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property); |
| extern int drm_property_add_enum(struct drm_property *property, int index, |
| uint64_t value, const char *name); |
| extern int drm_mode_create_dvi_i_properties(struct drm_device *dev); |
| extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats, |
| char *formats[]); |
| extern int drm_mode_create_scaling_mode_property(struct drm_device *dev); |
| extern int drm_mode_create_dithering_property(struct drm_device *dev); |
| extern char *drm_get_encoder_name(struct drm_encoder *encoder); |
| |
| extern int drm_mode_connector_attach_encoder(struct drm_connector *connector, |
| struct drm_encoder *encoder); |
| extern void drm_mode_connector_detach_encoder(struct drm_connector *connector, |
| struct drm_encoder *encoder); |
| extern bool drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, |
| int gamma_size); |
| extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, |
| uint32_t id, uint32_t type); |
| /* IOCTLs */ |
| extern int drm_mode_getresources(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| |
| extern int drm_mode_getcrtc(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_getconnector(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_setcrtc(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_cursor_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_addfb(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_rmfb(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_getfb(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_addmode_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_rmmode_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_attachmode_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_detachmode_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| |
| extern int drm_mode_getproperty_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_getblob_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_connector_property_set_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_hotplug_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_replacefb(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_getencoder(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_gamma_get_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern int drm_mode_gamma_set_ioctl(struct drm_device *dev, |
| void *data, struct drm_file *file_priv); |
| extern bool drm_detect_hdmi_monitor(struct edid *edid); |
| extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, |
| int hdisplay, int vdisplay, int vrefresh, |
| bool reduced, bool interlaced, bool margins); |
| extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev, |
| int hdisplay, int vdisplay, int vrefresh, |
| bool interlaced, int margins); |
| extern int drm_add_modes_noedid(struct drm_connector *connector, |
| int hdisplay, int vdisplay); |
| #endif /* __DRM_CRTC_H__ */ |