mfd: remove DS1WM clock handling
This driver requests a clock that usually is supplied by the MFD in which
the DS1WM is contained. Currently, it is impossible for a MFD to register
their clocks with the generic clock API due to different implementations
across architectures.
For now, this patch removes the clock handling from DS1WM altogether,
trusting that the MFD enable/disable functions will switch the clock if
needed. The clock rate is obtained from a new parameter in driver_data.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index f1e6b3d..37f08c8 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -16,7 +16,6 @@
#include <linux/irq.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
-#include <linux/clk.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
@@ -93,7 +92,6 @@
struct mfd_cell *cell;
int irq;
int active_high;
- struct clk *clk;
int slave_present;
void *reset_complete;
void *read_complete;
@@ -216,17 +214,17 @@
static void ds1wm_up(struct ds1wm_data *ds1wm_data)
{
- int gclk, divisor;
+ int divisor;
+ struct ds1wm_driver_data *plat = ds1wm_data->cell->driver_data;
if (ds1wm_data->cell->enable)
ds1wm_data->cell->enable(ds1wm_data->pdev);
- gclk = clk_get_rate(ds1wm_data->clk);
- clk_enable(ds1wm_data->clk);
- divisor = ds1wm_find_divisor(gclk);
+ divisor = ds1wm_find_divisor(plat->clock_rate);
if (divisor == 0) {
dev_err(&ds1wm_data->pdev->dev,
- "no suitable divisor for %dHz clock\n", gclk);
+ "no suitable divisor for %dHz clock\n",
+ plat->clock_rate);
return;
}
ds1wm_write_register(ds1wm_data, DS1WM_CLKDIV, divisor);
@@ -247,8 +245,6 @@
if (ds1wm_data->cell->disable)
ds1wm_data->cell->disable(ds1wm_data->pdev);
-
- clk_disable(ds1wm_data->clk);
}
/* --------------------------------------------------------------------- */
@@ -385,26 +381,18 @@
if (ret)
goto err1;
- ds1wm_data->clk = clk_get(&pdev->dev, "ds1wm");
- if (IS_ERR(ds1wm_data->clk)) {
- ret = PTR_ERR(ds1wm_data->clk);
- goto err2;
- }
-
ds1wm_up(ds1wm_data);
ds1wm_master.data = (void *)ds1wm_data;
ret = w1_add_master_device(&ds1wm_master);
if (ret)
- goto err3;
+ goto err2;
return 0;
-err3:
- ds1wm_down(ds1wm_data);
- clk_put(ds1wm_data->clk);
err2:
+ ds1wm_down(ds1wm_data);
free_irq(ds1wm_data->irq, ds1wm_data);
err1:
iounmap(ds1wm_data->map);
@@ -443,7 +431,6 @@
w1_remove_master_device(&ds1wm_master);
ds1wm_down(ds1wm_data);
- clk_put(ds1wm_data->clk);
free_irq(ds1wm_data->irq, ds1wm_data);
iounmap(ds1wm_data->map);
kfree(ds1wm_data);
diff --git a/include/linux/mfd/ds1wm.h b/include/linux/mfd/ds1wm.h
index d4898ba..be469a3 100644
--- a/include/linux/mfd/ds1wm.h
+++ b/include/linux/mfd/ds1wm.h
@@ -2,4 +2,5 @@
struct ds1wm_driver_data {
int active_high;
+ int clock_rate;
};