[SPARC64]: Fill holes in hypervisor APIs and fix KTSB registry.
Several interfaces were missing and others misnumbered or
improperly documented.
Also, make sure to check the return value when registering
the kernel TSBs with the hypervisor. This helped to find
the 4MB kernel TSB alignment bug fixed in a previous changeset.
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h
index 0a241c8..5cdb1ff 100644
--- a/include/asm-sparc64/hypervisor.h
+++ b/include/asm-sparc64/hypervisor.h
@@ -73,6 +73,8 @@
#define HV_ENOTSUPPORTED 13 /* Function not supported */
#define HV_ENOMAP 14 /* No mapping found */
#define HV_ETOOMANY 15 /* Too many items specified */
+#define HV_ECHANNEL 16 /* Invalid LDC channel */
+#define HV_EBUSY 17 /* Resource busy */
/* mach_exit()
* TRAP: HV_FAST_TRAP
@@ -95,6 +97,10 @@
*/
#define HV_FAST_MACH_EXIT 0x00
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_exit(unsigned long exit_core);
+#endif
+
/* Domain services. */
/* mach_desc()
@@ -121,11 +127,12 @@
#define HV_FAST_MACH_DESC 0x01
#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_desc(unsigned long buffer_pa, unsigned long buf_len,
+extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
+ unsigned long buf_len,
unsigned long *real_buf_len);
#endif
-/* mach_exit()
+/* mach_sir()
* TRAP: HV_FAST_TRAP
* FUNCTION: HV_FAST_MACH_SIR
* ERRORS: This service does not return.
@@ -140,58 +147,66 @@
*/
#define HV_FAST_MACH_SIR 0x02
-/* mach_set_soft_state()
- * TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE
- * ARG0: software state
- * ARG1: software state description pointer
- * RET0: status
- * ERRORS: EINVAL software state not valid or software state
- * description is not NULL terminated
- * ENORADDR software state description pointer is not a
- * valid real address
- * EBADALIGNED software state description is not correctly
- * aligned
- *
- * This allows the guest to report it's soft state to the hypervisor. There
- * are two primary components to this state. The first part states whether
- * the guest software is running or not. The second containts optional
- * details specific to the software.
- *
- * The software state argument is defined below in HV_SOFT_STATE_*, and
- * indicates whether the guest is operating normally or in a transitional
- * state.
- *
- * The software state description argument is a real address of a data buffer
- * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL
- * terminated 7-bit ASCII string of up to 31 characters not including the
- * NULL termination.
- */
-#define HV_FAST_MACH_SET_SOFT_STATE 0x70
-#define HV_SOFT_STATE_NORMAL 0x01
-#define HV_SOFT_STATE_TRANSITION 0x02
-
#ifndef __ASSEMBLY__
-extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
- unsigned long msg_string_ra);
+extern void sun4v_mach_sir(void);
#endif
-/* mach_get_soft_state()
+/* mach_set_watchdog()
* TRAP: HV_FAST_TRAP
- * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE
- * ARG0: software state description pointer
+ * FUNCTION: HV_FAST_MACH_SET_WATCHDOG
+ * ARG0: timeout in milliseconds
* RET0: status
- * RET1: software state
- * ERRORS: ENORADDR software state description pointer is not a
- * valid real address
- * EBADALIGNED software state description is not correctly
- * aligned
+ * RET1: time remaining in milliseconds
*
- * Retrieve the current value of the guest's software state. The rules
- * for the software state pointer are the same as for mach_set_soft_state()
- * above.
+ * A guest uses this API to set a watchdog timer. Once the gues has set
+ * the timer, it must call the timer service again either to disable or
+ * postpone the expiration. If the timer expires before being reset or
+ * disabled, then the hypervisor take a platform specific action leading
+ * to guest termination within a bounded time period. The platform action
+ * may include recovery actions such as reporting the expiration to a
+ * Service Processor, and/or automatically restarting the gues.
+ *
+ * The 'timeout' parameter is specified in milliseconds, however the
+ * implementated granularity is given by the 'watchdog-resolution'
+ * property in the 'platform' node of the guest's machine description.
+ * The largest allowed timeout value is specified by the
+ * 'watchdog-max-timeout' property of the 'platform' node.
+ *
+ * If the 'timeout' argument is not zero, the watchdog timer is set to
+ * expire after a minimum of 'timeout' milliseconds.
+ *
+ * If the 'timeout' argument is zero, the watchdog timer is disabled.
+ *
+ * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
+ * property, the hypervisor leaves the watchdog timer state unchanged,
+ * and returns a status of EINVAL.
+ *
+ * The 'time remaining' return value is valid regardless of whether the
+ * return status is EOK or EINVAL. A non-zero return value indicates the
+ * number of milliseconds that were remaining until the timer was to expire.
+ * If less than one millisecond remains, the return value is '1'. If the
+ * watchdog timer was disabled at the time of the call, the return value is
+ * zero.
+ *
+ * If the hypervisor cannot support the exact timeout value requested, but
+ * can support a larger timeout value, the hypervisor may round the actual
+ * timeout to a value larger than the requested timeout, consequently the
+ * 'time remaining' return value may be larger than the previously requested
+ * timeout value.
+ *
+ * Any guest OS debugger should be aware that the watchdog service may be in
+ * use. Consequently, it is recommended that the watchdog service is
+ * disabled upon debugger entry (e.g. reaching a breakpoint), and then
+ * re-enabled upon returning to normal execution. The API has been designed
+ * with this in mind, and the 'time remaining' result of the disable call may
+ * be used directly as the timeout argument of the re-enable call.
*/
-#define HV_FAST_MACH_GET_SOFT_STATE 0x71
+#define HV_FAST_MACH_SET_WATCHDOG 0x05
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
+ unsigned long *orig_timeout);
+#endif
/* CPU services.
*
@@ -216,8 +231,8 @@
* FUNCTION: HV_FAST_CPU_START
* ARG0: CPU ID
* ARG1: PC
- * ARG1: RTBA
- * ARG1: target ARG0
+ * ARG2: RTBA
+ * ARG3: target ARG0
* RET0: status
* ERRORS: ENOCPU Invalid CPU ID
* EINVAL Target CPU ID is not in the stopped state
@@ -234,6 +249,13 @@
*/
#define HV_FAST_CPU_START 0x10
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_start(unsigned long cpuid,
+ unsigned long pc,
+ unsigned long rtba,
+ unsigned long arg0);
+#endif
+
/* cpu_stop()
* TRAP: HV_FAST_TRAP
* FUNCTION: HV_FAST_CPU_STOP
@@ -255,6 +277,10 @@
*/
#define HV_FAST_CPU_STOP 0x11
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
+#endif
+
/* cpu_yield()
* TRAP: HV_FAST_TRAP
* FUNCTION: HV_FAST_CPU_YIELD
@@ -598,6 +624,11 @@
*/
#define HV_FAST_MMU_TSB_CTX0 0x20
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
+ unsigned long tsb_desc_ra);
+#endif
+
/* mmu_tsb_ctxnon0()
* TRAP: HV_FAST_TRAP
* FUNCTION: HV_FAST_MMU_TSB_CTXNON0
@@ -704,6 +735,13 @@
*/
#define HV_FAST_MMU_MAP_PERM_ADDR 0x25
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
+ unsigned long set_to_zero,
+ unsigned long tte,
+ unsigned long flags);
+#endif
+
/* mmu_fault_area_conf()
* TRAP: HV_FAST_TRAP
* FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF
@@ -902,6 +940,10 @@
*/
#define HV_FAST_TOD_GET 0x50
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_get(unsigned long *time);
+#endif
+
/* tod_set()
* TRAP: HV_FAST_TRAP
* FUNCTION: HV_FAST_TOD_SET
@@ -915,6 +957,10 @@
*/
#define HV_FAST_TOD_SET 0x51
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_set(unsigned long time);
+#endif
+
/* Console services */
/* con_getchar()
@@ -998,6 +1044,59 @@
unsigned long *bytes_written);
#endif
+/* mach_set_soft_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE
+ * ARG0: software state
+ * ARG1: software state description pointer
+ * RET0: status
+ * ERRORS: EINVAL software state not valid or software state
+ * description is not NULL terminated
+ * ENORADDR software state description pointer is not a
+ * valid real address
+ * EBADALIGNED software state description is not correctly
+ * aligned
+ *
+ * This allows the guest to report it's soft state to the hypervisor. There
+ * are two primary components to this state. The first part states whether
+ * the guest software is running or not. The second containts optional
+ * details specific to the software.
+ *
+ * The software state argument is defined below in HV_SOFT_STATE_*, and
+ * indicates whether the guest is operating normally or in a transitional
+ * state.
+ *
+ * The software state description argument is a real address of a data buffer
+ * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL
+ * terminated 7-bit ASCII string of up to 31 characters not including the
+ * NULL termination.
+ */
+#define HV_FAST_MACH_SET_SOFT_STATE 0x70
+#define HV_SOFT_STATE_NORMAL 0x01
+#define HV_SOFT_STATE_TRANSITION 0x02
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
+ unsigned long msg_string_ra);
+#endif
+
+/* mach_get_soft_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE
+ * ARG0: software state description pointer
+ * RET0: status
+ * RET1: software state
+ * ERRORS: ENORADDR software state description pointer is not a
+ * valid real address
+ * EBADALIGNED software state description is not correctly
+ * aligned
+ *
+ * Retrieve the current value of the guest's software state. The rules
+ * for the software state pointer are the same as for mach_set_soft_state()
+ * above.
+ */
+#define HV_FAST_MACH_GET_SOFT_STATE 0x71
+
/* Trap trace services.
*
* The hypervisor provides a trap tracing capability for privileged
@@ -1389,6 +1488,113 @@
extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
#endif
+/* vintr_get_cookie()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_GET_COOKIE
+ * ARG0: device handle
+ * ARG1: device ino
+ * RET0: status
+ * RET1: cookie
+ */
+#define HV_FAST_VINTR_GET_COOKIE 0xa7
+
+/* vintr_set_cookie()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_SET_COOKIE
+ * ARG0: device handle
+ * ARG1: device ino
+ * ARG2: cookie
+ * RET0: status
+ */
+#define HV_FAST_VINTR_SET_COOKIE 0xa8
+
+/* vintr_get_valid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_GET_VALID
+ * ARG0: device handle
+ * ARG1: device ino
+ * RET0: status
+ * RET1: valid state
+ */
+#define HV_FAST_VINTR_GET_VALID 0xa9
+
+/* vintr_set_valid()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_SET_VALID
+ * ARG0: device handle
+ * ARG1: device ino
+ * ARG2: valid state
+ * RET0: status
+ */
+#define HV_FAST_VINTR_SET_VALID 0xaa
+
+/* vintr_get_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_GET_STATE
+ * ARG0: device handle
+ * ARG1: device ino
+ * RET0: status
+ * RET1: state
+ */
+#define HV_FAST_VINTR_GET_STATE 0xab
+
+/* vintr_set_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_SET_STATE
+ * ARG0: device handle
+ * ARG1: device ino
+ * ARG2: state
+ * RET0: status
+ */
+#define HV_FAST_VINTR_SET_STATE 0xac
+
+/* vintr_get_target()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_GET_TARGET
+ * ARG0: device handle
+ * ARG1: device ino
+ * RET0: status
+ * RET1: cpuid
+ */
+#define HV_FAST_VINTR_GET_TARGET 0xad
+
+/* vintr_set_target()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_VINTR_SET_TARGET
+ * ARG0: device handle
+ * ARG1: device ino
+ * ARG2: cpuid
+ * RET0: status
+ */
+#define HV_FAST_VINTR_SET_TARGET 0xae
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long *cookie);
+extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long cookie);
+extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long *valid);
+extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long valid);
+extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long *state);
+extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long state);
+extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long *cpuid);
+extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
+ unsigned long dev_ino,
+ unsigned long cpuid);
+#endif
+
/* PCI IO services.
*
* See the terminology descriptions in the device interrupt services
@@ -2047,6 +2253,346 @@
*/
#define HV_FAST_PCI_MSG_SETVALID 0xd3
+/* Logical Domain Channel services. */
+
+#define LDC_CHANNEL_DOWN 0
+#define LDC_CHANNEL_UP 1
+#define LDC_CHANNEL_RESETTING 2
+
+/* ldc_tx_qconf()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_TX_QCONF
+ * ARG0: channel ID
+ * ARG1: real address base of queue
+ * ARG2: num entries in queue
+ * RET0: status
+ *
+ * Configure transmit queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries. Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size. Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * Upon configuration of a valid transmit queue the head and tail
+ * pointers are set to a hypervisor specific identical value indicating
+ * that the queue initially is empty.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description. A transmit queue may be
+ * specified even in the event that the LDC is down (peer endpoint has no
+ * receive queue specified). Transmission will begin as soon as the peer
+ * endpoint defines a receive queue.
+ *
+ * It is recommended that a guest wait for a transmit queue to empty prior
+ * to reconfiguring it, or un-configuring it. Re or un-configuring of a
+ * non-empty transmit queue behaves exactly as defined above, however it
+ * is undefined as to how many of the pending entries in the original queue
+ * will be delivered prior to the re-configuration taking effect.
+ * Furthermore, as the queue configuration causes a reset of the head and
+ * tail pointers there is no way for a guest to determine how many entries
+ * have been sent after the configuration operation.
+ */
+#define HV_FAST_LDC_TX_QCONF 0xe0
+
+/* ldc_tx_qinfo()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_TX_QINFO
+ * ARG0: channel ID
+ * RET0: status
+ * RET1: real address base of queue
+ * RET2: num entries in queue
+ *
+ * Return the configuration info for the transmit queue of LDC endpoint
+ * defined by the given channel ID. The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no transmit
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_TX_QINFO 0xe1
+
+/* ldc_tx_get_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_TX_GET_STATE
+ * ARG0: channel ID
+ * RET0: status
+ * RET1: head offset
+ * RET2: tail offset
+ * RET3: channel state
+ *
+ * Return the transmit state, and the head and tail queue pointers, for
+ * the transmit queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the transmit queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_TX_GET_STATE 0xe2
+
+/* ldc_tx_set_qtail()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_TX_SET_QTAIL
+ * ARG0: channel ID
+ * ARG1: tail offset
+ * RET0: status
+ *
+ * Update the tail pointer for the transmit queue associated with the LDC
+ * endpoint defined by the given channel ID. The tail offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to increase
+ * the number of pending entries on the transmit queue. Any attempt to
+ * decrease the number of pending transmit queue entires is considered
+ * an invalid tail offset and will result in an EINVAL error.
+ *
+ * Since the tail of the transmit queue may not be moved backwards, the
+ * transmit queue may be flushed by configuring a new transmit queue,
+ * whereupon the hypervisor will configure the initial transmit head and
+ * tail pointers to be equal.
+ */
+#define HV_FAST_LDC_TX_SET_QTAIL 0xe3
+
+/* ldc_rx_qconf()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_RX_QCONF
+ * ARG0: channel ID
+ * ARG1: real address base of queue
+ * ARG2: num entries in queue
+ * RET0: status
+ *
+ * Configure receive queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries. Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size. Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * If a valid receive queue is specified for a local endpoint the LDC is
+ * in the up state for the purpose of transmission to this endpoint.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.
+ *
+ * As receive queue configuration causes a reset of the queue's head and
+ * tail pointers there is no way for a gues to determine how many entries
+ * have been received between a preceeding ldc_get_rx_state() API call
+ * and the completion of the configuration operation. It should be noted
+ * that datagram delivery is not guarenteed via domain channels anyway,
+ * and therefore any higher protocol should be resilient to datagram
+ * loss if necessary. However, to overcome this specific race potential
+ * it is recommended, for example, that a higher level protocol be employed
+ * to ensure either retransmission, or ensure that no datagrams are pending
+ * on the peer endpoint's transmit queue prior to the configuration process.
+ */
+#define HV_FAST_LDC_RX_QCONF 0xe4
+
+/* ldc_rx_qinfo()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_RX_QINFO
+ * ARG0: channel ID
+ * RET0: status
+ * RET1: real address base of queue
+ * RET2: num entries in queue
+ *
+ * Return the configuration info for the receive queue of LDC endpoint
+ * defined by the given channel ID. The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no receive
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_RX_QINFO 0xe5
+
+/* ldc_rx_get_state()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_RX_GET_STATE
+ * ARG0: channel ID
+ * RET0: status
+ * RET1: head offset
+ * RET2: tail offset
+ * RET3: channel state
+ *
+ * Return the receive state, and the head and tail queue pointers, for
+ * the receive queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the receive queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_RX_GET_STATE 0xe6
+
+/* ldc_rx_set_qhead()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_RX_SET_QHEAD
+ * ARG0: channel ID
+ * ARG1: head offset
+ * RET0: status
+ *
+ * Update the head pointer for the receive queue associated with the LDC
+ * endpoint defined by the given channel ID. The head offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to decrease
+ * the number of pending entries on the receive queue. Any attempt to
+ * increase the number of pending receive queue entires is considered
+ * an invalid head offset and will result in an EINVAL error.
+ *
+ * The receive queue may be flushed by setting the head offset equal
+ * to the current tail offset.
+ */
+#define HV_FAST_LDC_RX_SET_QHEAD 0xe7
+
+/* LDC Map Table Entry. Each slot is defined by a translation table
+ * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
+ * hypervisor invalidation cookie.
+ */
+#define LDC_MTE_PADDR 0x0fffffffffffe000 /* pa[55:13] */
+#define LDC_MTE_COPY_W 0x0000000000000400 /* copy write access */
+#define LDC_MTE_COPY_R 0x0000000000000200 /* copy read access */
+#define LDC_MTE_IOMMU_W 0x0000000000000100 /* IOMMU write access */
+#define LDC_MTE_IOMMU_R 0x0000000000000080 /* IOMMU read access */
+#define LDC_MTE_EXEC 0x0000000000000040 /* execute */
+#define LDC_MTE_WRITE 0x0000000000000020 /* read */
+#define LDC_MTE_READ 0x0000000000000010 /* write */
+#define LDC_MTE_SZALL 0x000000000000000f /* page size bits */
+#define LDC_MTE_SZ16GB 0x0000000000000007 /* 16GB page */
+#define LDC_MTE_SZ2GB 0x0000000000000006 /* 2GB page */
+#define LDC_MTE_SZ256MB 0x0000000000000005 /* 256MB page */
+#define LDC_MTE_SZ32MB 0x0000000000000004 /* 32MB page */
+#define LDC_MTE_SZ4MB 0x0000000000000003 /* 4MB page */
+#define LDC_MTE_SZ512K 0x0000000000000002 /* 512K page */
+#define LDC_MTE_SZ64K 0x0000000000000001 /* 64K page */
+#define LDC_MTE_SZ8K 0x0000000000000000 /* 8K page */
+
+#ifndef __ASSEMBLY__
+struct ldc_mtable_entry {
+ unsigned long mte;
+ unsigned long cookie;
+};
+#endif
+
+/* ldc_set_map_table()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_SET_MAP_TABLE
+ * ARG0: channel ID
+ * ARG1: table real address
+ * ARG2: num entries
+ * RET0: status
+ *
+ * Register the MTE table at the given table real address, with the
+ * specified num entries, for the LDC indicated by the given channel
+ * ID.
+ */
+#define HV_FAST_LDC_SET_MAP_TABLE 0xea
+
+/* ldc_get_map_table()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_GET_MAP_TABLE
+ * ARG0: channel ID
+ * RET0: status
+ * RET1: table real address
+ * RET2: num entries
+ *
+ * Return the configuration of the current mapping table registered
+ * for the given channel ID.
+ */
+#define HV_FAST_LDC_GET_MAP_TABLE 0xeb
+
+#define LDC_COPY_IN 0
+#define LDC_COPY_OUT 1
+
+/* ldc_copy()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_COPY
+ * ARG0: channel ID
+ * ARG1: LDC_COPY_* direction code
+ * ARG2: target real address
+ * ARG3: local real address
+ * ARG4: length in bytes
+ * RET0: status
+ * RET1: actual length in bytes
+ */
+#define HV_FAST_LDC_COPY 0xec
+
+#define LDC_MEM_READ 1
+#define LDC_MEM_WRITE 2
+#define LDC_MEM_EXEC 4
+
+/* ldc_mapin()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_MAPIN
+ * ARG0: channel ID
+ * ARG1: cookie
+ * RET0: status
+ * RET1: real address
+ * RET2: LDC_MEM_* permissions
+ */
+#define HV_FAST_LDC_MAPIN 0xed
+
+/* ldc_unmap()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_UNMAP
+ * ARG0: real address
+ * RET0: status
+ */
+#define HV_FAST_LDC_UNMAP 0xee
+
+/* ldc_revoke()
+ * TRAP: HV_FAST_TRAP
+ * FUNCTION: HV_FAST_LDC_REVOKE
+ * ARG0: cookie
+ * ARG1: ldc_mtable_entry cookie
+ * RET0: status
+ */
+#define HV_FAST_LDC_REVOKE 0xef
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
+ unsigned long ra,
+ unsigned long num_entries);
+extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
+ unsigned long *ra,
+ unsigned long *num_entries);
+extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
+ unsigned long *head_off,
+ unsigned long *tail_off,
+ unsigned long *chan_state);
+extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
+ unsigned long tail_off);
+extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
+ unsigned long ra,
+ unsigned long num_entries);
+extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
+ unsigned long *ra,
+ unsigned long *num_entries);
+extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
+ unsigned long *head_off,
+ unsigned long *tail_off,
+ unsigned long *chan_state);
+extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
+ unsigned long head_off);
+extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
+ unsigned long ra,
+ unsigned long num_entries);
+extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
+ unsigned long *ra,
+ unsigned long *num_entries);
+extern unsigned long sun4v_ldc_copy(unsigned long channel,
+ unsigned long dir_code,
+ unsigned long tgt_raddr,
+ unsigned long lcl_raddr,
+ unsigned long len,
+ unsigned long *actual_len);
+extern unsigned long sun4v_ldc_mapin(unsigned long channel,
+ unsigned long cookie,
+ unsigned long *ra,
+ unsigned long *perm);
+extern unsigned long sun4v_ldc_unmap(unsigned long ra);
+extern unsigned long sun4v_ldc_revoke(unsigned long cookie,
+ unsigned long mte_cookie);
+#endif
+
/* Performance counter services. */
#define HV_PERF_JBUS_PERF_CTRL_REG 0x00