drivers/thermal/msm8974-tsens.c

/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#define pr_fmt(fmt) "%s: " fmt, __func__

#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/thermal.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/msm_tsens.h>
#include <linux/err.h>
#include <linux/of.h>

#include <mach/msm_iomap.h>

#define TSENS_DRIVER_NAME		"msm-tsens"
/* TSENS register info */
#define TSENS_UPPER_LOWER_INTERRUPT_CTRL(n)		((n) + 0x1000)
#define TSENS_INTERRUPT_EN		BIT(0)

#define TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR(n)	((n) + 0x1004)
#define TSENS_UPPER_STATUS_CLR		BIT(21)
#define TSENS_LOWER_STATUS_CLR		BIT(20)
#define TSENS_UPPER_THRESHOLD_MASK	0xffc00
#define TSENS_LOWER_THRESHOLD_MASK	0x3ff
#define TSENS_UPPER_THRESHOLD_SHIFT	10

#define TSENS_S0_STATUS_ADDR(n)		((n) + 0x1030)
#define TSENS_SN_ADDR_OFFSET		0x4
#define TSENS_SN_STATUS_TEMP_MASK	0x3ff
#define TSENS_SN_STATUS_LOWER_STATUS	BIT(11)
#define TSENS_SN_STATUS_UPPER_STATUS	BIT(12)
#define TSENS_STATUS_ADDR_OFFSET			2

#define TSENS_TRDY_ADDR(n)		((n) + 0x105c)
#define TSENS_TRDY_MASK			BIT(0)

#define TSENS_CTRL_ADDR(n)		(n)
#define TSENS_EN			BIT(0)
#define TSENS_SW_RST			BIT(1)
#define TSENS_ADC_CLK_SEL		BIT(2)
#define TSENS_SENSOR0_SHIFT		3
#define TSENS_62_5_MS_MEAS_PERIOD	1
#define TSENS_312_5_MS_MEAS_PERIOD	2
#define TSENS_MEAS_PERIOD_SHIFT		18

#define TSENS_SN_MIN_MAX_STATUS_CTRL(n)	((n) + 4)
#define TSENS_GLOBAL_CONFIG(n)		((n) + 0x34)
#define TSENS_S0_MAIN_CONFIG(n)		((n) + 0x38)
#define TSENS_SN_REMOTE_CONFIG(n)	((n) + 0x3c)

#define TSENS_EEPROM(n)			((n) + 0xd0)
#define TSENS_EEPROM_REDUNDANCY_SEL(n)	((n) + 0x444)
#define TSENS_EEPROM_BACKUP_REGION(n)	((n) + 0x440)

#define TSENS_MAIN_CALIB_ADDR_RANGE	6
#define TSENS_BACKUP_CALIB_ADDR_RANGE	4

#define TSENS_EEPROM_8X26_1(n)		((n) + 0x1c0)
#define TSENS_EEPROM_8X26_2(n)		((n) + 0x444)
#define TSENS_8X26_MAIN_CALIB_ADDR_RANGE	4

#define TSENS_EEPROM_8X10_1(n)		((n) + 0x1a4)
#define TSENS_EEPROM_8X10_1_OFFSET	8

/* TSENS calibration Mask data */
#define TSENS_BASE1_MASK		0xff
#define TSENS0_POINT1_MASK		0x3f00
#define TSENS1_POINT1_MASK		0xfc000
#define TSENS2_POINT1_MASK		0x3f00000
#define TSENS3_POINT1_MASK		0xfc000000
#define TSENS4_POINT1_MASK		0x3f
#define TSENS5_POINT1_MASK		0xfc0
#define TSENS6_POINT1_MASK		0x3f000
#define TSENS7_POINT1_MASK		0xfc0000
#define TSENS8_POINT1_MASK		0x3f000000
#define TSENS8_POINT1_MASK_BACKUP	0x3f
#define TSENS9_POINT1_MASK		0x3f
#define TSENS9_POINT1_MASK_BACKUP	0xfc0
#define TSENS10_POINT1_MASK		0xfc0
#define TSENS10_POINT1_MASK_BACKUP	0x3f000
#define TSENS_CAL_SEL_0_1		0xc0000000
#define TSENS_CAL_SEL_2			0x40000000
#define TSENS_CAL_SEL_SHIFT		30
#define TSENS_CAL_SEL_SHIFT_2		28
#define TSENS_ONE_POINT_CALIB		0x1
#define TSENS_ONE_POINT_CALIB_OPTION_2	0x2
#define TSENS_TWO_POINT_CALIB		0x3

#define TSENS0_POINT1_SHIFT		8
#define TSENS1_POINT1_SHIFT		14
#define TSENS2_POINT1_SHIFT		20
#define TSENS3_POINT1_SHIFT		26
#define TSENS5_POINT1_SHIFT		6
#define TSENS6_POINT1_SHIFT		12
#define TSENS7_POINT1_SHIFT		18
#define TSENS8_POINT1_SHIFT		24
#define TSENS9_POINT1_BACKUP_SHIFT	6
#define TSENS10_POINT1_SHIFT		6
#define TSENS10_POINT1_BACKUP_SHIFT	12

#define TSENS_POINT2_BASE_SHIFT		12
#define TSENS_POINT2_BASE_BACKUP_SHIFT	18
#define TSENS0_POINT2_SHIFT		20
#define TSENS0_POINT2_BACKUP_SHIFT	26
#define TSENS1_POINT2_SHIFT		26
#define TSENS2_POINT2_BACKUP_SHIFT	6
#define TSENS3_POINT2_SHIFT		6
#define TSENS3_POINT2_BACKUP_SHIFT	12
#define TSENS4_POINT2_SHIFT		12
#define TSENS4_POINT2_BACKUP_SHIFT	18
#define TSENS5_POINT2_SHIFT		18
#define TSENS5_POINT2_BACKUP_SHIFT	24
#define TSENS6_POINT2_SHIFT		24
#define TSENS7_POINT2_BACKUP_SHIFT	6
#define TSENS8_POINT2_SHIFT		6
#define TSENS8_POINT2_BACKUP_SHIFT	12
#define TSENS9_POINT2_SHIFT		12
#define TSENS9_POINT2_BACKUP_SHIFT	18
#define TSENS10_POINT2_SHIFT		18
#define TSENS10_POINT2_BACKUP_SHIFT	24

#define TSENS_BASE2_MASK		0xff000
#define TSENS_BASE2_BACKUP_MASK		0xfc0000
#define TSENS0_POINT2_MASK		0x3f00000
#define TSENS0_POINT2_BACKUP_MASK	0xfc000000
#define TSENS1_POINT2_MASK		0xfc000000
#define TSENS1_POINT2_BACKUP_MASK	0x3f
#define TSENS2_POINT2_MASK		0x3f
#define TSENS2_POINT2_BACKUP_MASK	0xfc0
#define TSENS3_POINT2_MASK		0xfc0
#define TSENS3_POINT2_BACKUP_MASK	0x3f000
#define TSENS4_POINT2_MASK		0x3f000
#define TSENS4_POINT2_BACKUP_MASK	0xfc0000
#define TSENS5_POINT2_MASK		0xfc0000
#define TSENS5_POINT2_BACKUP_MASK	0x3f000000
#define TSENS6_POINT2_MASK		0x3f000000
#define TSENS6_POINT2_BACKUP_MASK	0x3f
#define TSENS7_POINT2_MASK		0x3f
#define TSENS7_POINT2_BACKUP_MASK	0xfc0
#define TSENS8_POINT2_MASK		0xfc0
#define TSENS8_POINT2_BACKUP_MASK	0x3f000
#define TSENS9_POINT2_MASK		0x3f000
#define TSENS9_POINT2_BACKUP_MASK	0xfc0000
#define TSENS10_POINT2_MASK		0xfc0000
#define TSENS10_POINT2_BACKUP_MASK	0x3f000000

#define TSENS_8X26_BASE0_MASK		0x1fe000
#define TSENS0_8X26_POINT1_MASK		0x7f00000
#define TSENS1_8X26_POINT1_MASK		0x3f
#define TSENS2_8X26_POINT1_MASK		0xfc0
#define TSENS3_8X26_POINT1_MASK		0x3f000
#define TSENS4_8X26_POINT1_MASK		0xfc0000
#define TSENS5_8X26_POINT1_MASK		0x3f000000
#define TSENS6_8X26_POINT1_MASK		0x3f00000
#define TSENS_8X26_TSENS_CAL_SEL	0xe0000000
#define TSENS_8X26_BASE1_MASK		0xff
#define TSENS0_8X26_POINT2_MASK		0x3f00
#define TSENS1_8X26_POINT2_MASK		0xfc00
#define TSENS2_8X26_POINT2_MASK		0x3f00000
#define TSENS3_8X26_POINT2_MASK		0xfc000000
#define TSENS4_8X26_POINT2_MASK		0xfc000000
#define TSENS5_8X26_POINT2_MASK		0x3f00000
#define TSENS6_8X26_POINT2_MASK		0x7e0000

#define TSENS_8X26_CAL_SEL_SHIFT	29
#define TSENS_8X26_BASE0_SHIFT		13
#define TSENS0_8X26_POINT1_SHIFT	21
#define TSENS2_8X26_POINT1_SHIFT	6
#define TSENS3_8X26_POINT1_SHIFT	12
#define TSENS4_8X26_POINT1_SHIFT	18
#define TSENS5_8X26_POINT1_SHIFT	24
#define TSENS6_8X26_POINT1_SHIFT	20

#define TSENS0_8X26_POINT2_SHIFT	8
#define TSENS1_8X26_POINT2_SHIFT	14
#define TSENS2_8X26_POINT2_SHIFT	20
#define TSENS3_8X26_POINT2_SHIFT	26
#define TSENS4_8X26_POINT2_SHIFT	20
#define TSENS5_8X26_POINT2_SHIFT	26
#define TSENS6_8X26_POINT2_SHIFT	17

#define TSENS_8X10_CAL_SEL_SHIFT	28
#define TSENS_8X10_BASE1_SHIFT		8
#define TSENS0_8X10_POINT1_SHIFT	16
#define TSENS0_8X10_POINT2_SHIFT	22
#define TSENS1_8X10_POINT2_SHIFT	6
#define TSENS_8X10_BASE0_MASK		0xff
#define TSENS_8X10_BASE1_MASK		0xff00
#define TSENS0_8X10_POINT1_MASK		0x3f0000
#define TSENS0_8X10_POINT2_MASK		0xfc00000
#define TSENS_8X10_TSENS_CAL_SEL	0x70000000
#define TSENS1_8X10_POINT1_MASK		0x3f
#define TSENS1_8X10_POINT2_MASK		0xfc0

#define TSENS_BIT_APPEND		0x3
#define TSENS_CAL_DEGC_POINT1		30
#define TSENS_CAL_DEGC_POINT2		120
#define TSENS_SLOPE_FACTOR		1000

/* TSENS register data */
#define TSENS_TRDY_RDY_MIN_TIME		2000
#define TSENS_TRDY_RDY_MAX_TIME		2100
#define TSENS_THRESHOLD_MAX_CODE	0x3ff
#define TSENS_THRESHOLD_MIN_CODE	0x0

#define TSENS_GLOBAL_INIT_DATA		0x302f16c
#define TSENS_S0_MAIN_CFG_INIT_DATA	0x1c3
#define TSENS_SN_MIN_MAX_STATUS_CTRL_DATA	0x3ffc00
#define TSENS_SN_REMOTE_CFG_DATA	0x11c3

#define TSENS_QFPROM_BACKUP_SEL		0x3
#define TSENS_QFPROM_BACKUP_REDUN_SEL	0xe0000000
#define TSENS_QFPROM_BACKUP_REDUN_SHIFT	29

enum tsens_calib_fuse_map_type {
	TSENS_CALIB_FUSE_MAP_8974 = 0,
	TSENS_CALIB_FUSE_MAP_8X26,
	TSENS_CALIB_FUSE_MAP_8X10,
	TSENS_CALIB_FUSE_MAP_NUM,
};

/* Trips: warm and cool */
enum tsens_trip_type {
	TSENS_TRIP_WARM = 0,
	TSENS_TRIP_COOL,
	TSENS_TRIP_NUM,
};

struct tsens_tm_device_sensor {
	struct thermal_zone_device	*tz_dev;
	enum thermal_device_mode	mode;
	/* Physical HW sensor number */
	unsigned int			sensor_hw_num;
	/* Software index. This is keep track of the HW/SW
	 * sensor_ID mapping */
	unsigned int			sensor_sw_id;
	struct work_struct		work;
	int				offset;
	int				calib_data_point1;
	int				calib_data_point2;
	uint32_t			slope_mul_tsens_factor;
};

struct tsens_tm_device {
	struct platform_device		*pdev;
	struct workqueue_struct		*tsens_wq;
	bool				prev_reading_avail;
	bool				calibration_less_mode;
	bool				tsens_local_init;
	int				tsens_factor;
	uint32_t			tsens_num_sensor;
	int				tsens_irq;
	void				*tsens_addr;
	void				*tsens_calib_addr;
	int				tsens_len;
	int				calib_len;
	struct resource			*res_tsens_mem;
	struct resource			*res_calib_mem;
	struct work_struct		tsens_work;
	uint32_t			calib_mode;
	struct tsens_tm_device_sensor	sensor[0];
};

struct tsens_tm_device *tmdev;

int tsens_get_sw_id_mapping(int sensor_hw_num, int *sensor_sw_idx)
{
	int i = 0;
	bool id_found = false;

	while (i < tmdev->tsens_num_sensor && !id_found) {
		if (sensor_hw_num == tmdev->sensor[i].sensor_hw_num) {
			*sensor_sw_idx = tmdev->sensor[i].sensor_sw_id;
			id_found = true;
		}
		i++;
	}

	if (!id_found)
		return -EINVAL;

	return 0;
}
EXPORT_SYMBOL(tsens_get_sw_id_mapping);

int tsens_get_hw_id_mapping(int sensor_sw_id, int *sensor_hw_num)
{
	int i = 0;
	bool id_found = false;

	while (i < tmdev->tsens_num_sensor && !id_found) {
		if (sensor_sw_id == tmdev->sensor[i].sensor_sw_id) {
			*sensor_hw_num = tmdev->sensor[i].sensor_hw_num;
			id_found = true;
		}
		i++;
	}

	if (!id_found)
		return -EINVAL;

	return 0;
}
EXPORT_SYMBOL(tsens_get_hw_id_mapping);

static int tsens_tz_code_to_degc(int adc_code, int sensor_sw_id)
{
	int degc, num, den, idx;

	idx = sensor_sw_id;
	num = ((adc_code * tmdev->tsens_factor) -
				tmdev->sensor[idx].offset);
	den = (int) tmdev->sensor[idx].slope_mul_tsens_factor;

	if (num > 0)
		degc = ((num + (den/2))/den);
	else if (num < 0)
		degc = ((num - (den/2))/den);
	else
		degc = num/den;

	pr_debug("raw_code:0x%x, sensor_num:%d, degc:%d\n",
			adc_code, idx, degc);
	return degc;
}

static int tsens_tz_degc_to_code(int degc, int idx)
{
	int code = ((degc * tmdev->sensor[idx].slope_mul_tsens_factor)
		+ tmdev->sensor[idx].offset)/tmdev->tsens_factor;

	if (code > TSENS_THRESHOLD_MAX_CODE)
		code = TSENS_THRESHOLD_MAX_CODE;
	else if (code < TSENS_THRESHOLD_MIN_CODE)
		code = TSENS_THRESHOLD_MIN_CODE;
	pr_debug("raw_code:0x%x, sensor_num:%d, degc:%d\n",
			code, idx, degc);
	return code;
}

static void msm_tsens_get_temp(int sensor_hw_num, unsigned long *temp)
{
	unsigned int code, sensor_addr;
	int sensor_sw_id = -EINVAL, rc = 0;

	if (!tmdev->prev_reading_avail) {
		while (!(readl_relaxed(TSENS_TRDY_ADDR(tmdev->tsens_addr))
					& TSENS_TRDY_MASK))
			usleep_range(TSENS_TRDY_RDY_MIN_TIME,
				TSENS_TRDY_RDY_MAX_TIME);
		tmdev->prev_reading_avail = true;
	}

	sensor_addr =
		(unsigned int)TSENS_S0_STATUS_ADDR(tmdev->tsens_addr);
	code = readl_relaxed(sensor_addr +
			(sensor_hw_num << TSENS_STATUS_ADDR_OFFSET));
	/* Obtain SW index to map the corresponding thermal zone's
	 * offset and slope for code to degc conversion. */
	rc = tsens_get_sw_id_mapping(sensor_hw_num, &sensor_sw_id);
	if (rc < 0) {
		pr_err("tsens mapping index not found\n");
		return;
	}

	*temp = tsens_tz_code_to_degc((code & TSENS_SN_STATUS_TEMP_MASK),
								sensor_sw_id);
}

static int tsens_tz_get_temp(struct thermal_zone_device *thermal,
			     unsigned long *temp)
{
	struct tsens_tm_device_sensor *tm_sensor = thermal->devdata;

	if (!tm_sensor || tm_sensor->mode != THERMAL_DEVICE_ENABLED || !temp)
		return -EINVAL;

	msm_tsens_get_temp(tm_sensor->sensor_hw_num, temp);

	return 0;
}

int tsens_get_temp(struct tsens_device *device, unsigned long *temp)
{
	if (!tmdev)
		return -ENODEV;

	msm_tsens_get_temp(device->sensor_num, temp);

	return 0;
}
EXPORT_SYMBOL(tsens_get_temp);

int tsens_get_max_sensor_num(uint32_t *tsens_num_sensors)
{
	if (!tmdev)
		return -ENODEV;

	*tsens_num_sensors = tmdev->tsens_num_sensor;

	return 0;
}
EXPORT_SYMBOL(tsens_get_max_sensor_num);

static int tsens_tz_get_mode(struct thermal_zone_device *thermal,
			      enum thermal_device_mode *mode)
{
	struct tsens_tm_device_sensor *tm_sensor = thermal->devdata;

	if (!tm_sensor || !mode)
		return -EINVAL;

	*mode = tm_sensor->mode;

	return 0;
}

static int tsens_tz_get_trip_type(struct thermal_zone_device *thermal,
				   int trip, enum thermal_trip_type *type)
{
	struct tsens_tm_device_sensor *tm_sensor = thermal->devdata;

	if (!tm_sensor || trip < 0 || !type)
		return -EINVAL;

	switch (trip) {
	case TSENS_TRIP_WARM:
		*type = THERMAL_TRIP_CONFIGURABLE_HI;
		break;
	case TSENS_TRIP_COOL:
		*type = THERMAL_TRIP_CONFIGURABLE_LOW;
		break;
	default:
		return -EINVAL;
	}

	return 0;
}

static int tsens_tz_activate_trip_type(struct thermal_zone_device *thermal,
			int trip, enum thermal_trip_activation_mode mode)
{
	struct tsens_tm_device_sensor *tm_sensor = thermal->devdata;
	unsigned int reg_cntl, code, hi_code, lo_code, mask;

	if (!tm_sensor || trip < 0)
		return -EINVAL;

	lo_code = TSENS_THRESHOLD_MIN_CODE;
	hi_code = TSENS_THRESHOLD_MAX_CODE;

	reg_cntl = readl_relaxed((TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR
					(tmdev->tsens_addr) +
					(tm_sensor->sensor_hw_num *
					TSENS_SN_ADDR_OFFSET)));
	switch (trip) {
	case TSENS_TRIP_WARM:
		code = (reg_cntl & TSENS_UPPER_THRESHOLD_MASK)
					>> TSENS_UPPER_THRESHOLD_SHIFT;
		mask = TSENS_UPPER_STATUS_CLR;

		if (!(reg_cntl & TSENS_LOWER_STATUS_CLR))
			lo_code = (reg_cntl & TSENS_LOWER_THRESHOLD_MASK);
		break;
	case TSENS_TRIP_COOL:
		code = (reg_cntl & TSENS_LOWER_THRESHOLD_MASK);
		mask = TSENS_LOWER_STATUS_CLR;

		if (!(reg_cntl & TSENS_UPPER_STATUS_CLR))
			hi_code = (reg_cntl & TSENS_UPPER_THRESHOLD_MASK)
					>> TSENS_UPPER_THRESHOLD_SHIFT;
		break;
	default:
		return -EINVAL;
	}

	if (mode == THERMAL_TRIP_ACTIVATION_DISABLED)
		writel_relaxed(reg_cntl | mask,
			(TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR
						(tmdev->tsens_addr) +
			(tm_sensor->sensor_hw_num * TSENS_SN_ADDR_OFFSET)));
	else {
		if (code < lo_code || code > hi_code) {
			pr_err("%s with invalid code %x\n", __func__, code);
			return -EINVAL;
		}
		writel_relaxed(reg_cntl & ~mask,
		(TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR(tmdev->tsens_addr) +
		(tm_sensor->sensor_hw_num * TSENS_SN_ADDR_OFFSET)));
	}
	mb();
	return 0;
}

static int tsens_tz_get_trip_temp(struct thermal_zone_device *thermal,
				   int trip, unsigned long *temp)
{
	struct tsens_tm_device_sensor *tm_sensor = thermal->devdata;
	unsigned int reg;
	int sensor_sw_id = -EINVAL, rc = 0;

	if (!tm_sensor || trip < 0 || !temp)
		return -EINVAL;

	reg = readl_relaxed(TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR
						(tmdev->tsens_addr) +
			(tm_sensor->sensor_hw_num * TSENS_SN_ADDR_OFFSET));
	switch (trip) {
	case TSENS_TRIP_WARM:
		reg = (reg & TSENS_UPPER_THRESHOLD_MASK) >>
				TSENS_UPPER_THRESHOLD_SHIFT;
		break;
	case TSENS_TRIP_COOL:
		reg = (reg & TSENS_LOWER_THRESHOLD_MASK);
		break;
	default:
		return -EINVAL;
	}

	rc = tsens_get_sw_id_mapping(tm_sensor->sensor_hw_num, &sensor_sw_id);
	if (rc < 0) {
		pr_err("tsens mapping index not found\n");
		return rc;
	}
	*temp = tsens_tz_code_to_degc(reg, sensor_sw_id);

	return 0;
}

static int tsens_tz_notify(struct thermal_zone_device *thermal,
				int count, enum thermal_trip_type type)
{
	/* Critical temperature threshold are enabled and will
	 * shutdown the device once critical thresholds are crossed. */
	pr_debug("%s debug\n", __func__);
	return 1;
}

static int tsens_tz_set_trip_temp(struct thermal_zone_device *thermal,
				   int trip, long temp)
{
	struct tsens_tm_device_sensor *tm_sensor = thermal->devdata;
	unsigned int reg_cntl;
	int code, hi_code, lo_code, code_err_chk, sensor_sw_id = 0, rc = 0;

	rc = tsens_get_sw_id_mapping(tm_sensor->sensor_hw_num, &sensor_sw_id);
	if (rc < 0) {
		pr_err("tsens mapping index not found\n");
		return rc;
	}
	code_err_chk = code = tsens_tz_degc_to_code(temp, sensor_sw_id);
	if (!tm_sensor || trip < 0)
		return -EINVAL;

	lo_code = TSENS_THRESHOLD_MIN_CODE;
	hi_code = TSENS_THRESHOLD_MAX_CODE;

	reg_cntl = readl_relaxed(TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR
			(tmdev->tsens_addr) + (tm_sensor->sensor_hw_num *
					TSENS_SN_ADDR_OFFSET));
	switch (trip) {
	case TSENS_TRIP_WARM:
		code <<= TSENS_UPPER_THRESHOLD_SHIFT;
		reg_cntl &= ~TSENS_UPPER_THRESHOLD_MASK;
		if (!(reg_cntl & TSENS_LOWER_STATUS_CLR))
			lo_code = (reg_cntl & TSENS_LOWER_THRESHOLD_MASK);
		break;
	case TSENS_TRIP_COOL:
		reg_cntl &= ~TSENS_LOWER_THRESHOLD_MASK;
		if (!(reg_cntl & TSENS_UPPER_STATUS_CLR))
			hi_code = (reg_cntl & TSENS_UPPER_THRESHOLD_MASK)
					>> TSENS_UPPER_THRESHOLD_SHIFT;
		break;
	default:
		return -EINVAL;
	}

	if (code_err_chk < lo_code || code_err_chk > hi_code)
		return -EINVAL;

	writel_relaxed(reg_cntl | code, (TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR
					(tmdev->tsens_addr) +
					(tm_sensor->sensor_hw_num *
					TSENS_SN_ADDR_OFFSET)));
	mb();
	return 0;
}

static struct thermal_zone_device_ops tsens_thermal_zone_ops = {
	.get_temp = tsens_tz_get_temp,
	.get_mode = tsens_tz_get_mode,
	.get_trip_type = tsens_tz_get_trip_type,
	.activate_trip_type = tsens_tz_activate_trip_type,
	.get_trip_temp = tsens_tz_get_trip_temp,
	.set_trip_temp = tsens_tz_set_trip_temp,
	.notify = tsens_tz_notify,
};

static void notify_uspace_tsens_fn(struct work_struct *work)
{
	struct tsens_tm_device_sensor *tm = container_of(work,
		struct tsens_tm_device_sensor, work);

	sysfs_notify(&tm->tz_dev->device.kobj,
					NULL, "type");
}

static void tsens_scheduler_fn(struct work_struct *work)
{
	struct tsens_tm_device *tm = container_of(work, struct tsens_tm_device,
						tsens_work);
	unsigned int i, status, threshold;
	unsigned int sensor_status_addr, sensor_status_ctrl_addr;
	int sensor_sw_id = -EINVAL, rc = 0;

	sensor_status_addr =
		(unsigned int)TSENS_S0_STATUS_ADDR(tmdev->tsens_addr);
	sensor_status_ctrl_addr =
		(unsigned int)TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR
		(tmdev->tsens_addr);
	for (i = 0; i < tm->tsens_num_sensor; i++) {
		bool upper_thr = false, lower_thr = false;
		uint32_t addr_offset;

		addr_offset = tm->sensor[i].sensor_hw_num *
						TSENS_SN_ADDR_OFFSET;
		status = readl_relaxed(sensor_status_addr + addr_offset);
		threshold = readl_relaxed(sensor_status_ctrl_addr +
								addr_offset);
		if (status & TSENS_SN_STATUS_UPPER_STATUS) {
			writel_relaxed(threshold | TSENS_UPPER_STATUS_CLR,
				TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR(
					tmdev->tsens_addr + addr_offset));
			upper_thr = true;
		}
		if (status & TSENS_SN_STATUS_LOWER_STATUS) {
			writel_relaxed(threshold | TSENS_LOWER_STATUS_CLR,
				TSENS_S0_UPPER_LOWER_STATUS_CTRL_ADDR(
					tmdev->tsens_addr + addr_offset));
			lower_thr = true;
		}
		if (upper_thr || lower_thr) {
			/* Notify user space */
			queue_work(tm->tsens_wq, &tm->sensor[i].work);
			rc = tsens_get_sw_id_mapping(
					tm->sensor[i].sensor_hw_num,
					&sensor_sw_id);
			if (rc < 0)
				pr_err("tsens mapping index not found\n");
			pr_debug("sensor:%d trigger temp (%d degC)\n",
				tm->sensor[i].sensor_hw_num,
				tsens_tz_code_to_degc((status &
				TSENS_SN_STATUS_TEMP_MASK),
				sensor_sw_id));
		}
	}
	mb();
}

static irqreturn_t tsens_isr(int irq, void *data)
{
	queue_work(tmdev->tsens_wq, &tmdev->tsens_work);

	return IRQ_HANDLED;
}

static void tsens_hw_init(void)
{
	unsigned int reg_cntl = 0, sensor_en = 0;
	unsigned int i;

	if (tmdev->tsens_local_init) {
		writel_relaxed(reg_cntl, TSENS_CTRL_ADDR(tmdev->tsens_addr));
		writel_relaxed(reg_cntl | TSENS_SW_RST,
			TSENS_CTRL_ADDR(tmdev->tsens_addr));
		reg_cntl |= (TSENS_62_5_MS_MEAS_PERIOD <<
		TSENS_MEAS_PERIOD_SHIFT);
		for (i = 0; i < tmdev->tsens_num_sensor; i++)
			sensor_en |= (1 << tmdev->sensor[i].sensor_hw_num);
		sensor_en <<= TSENS_SENSOR0_SHIFT;
		reg_cntl |= (sensor_en | TSENS_EN);
		writel_relaxed(reg_cntl, TSENS_CTRL_ADDR(tmdev->tsens_addr));
		writel_relaxed(TSENS_GLOBAL_INIT_DATA,
			TSENS_GLOBAL_CONFIG(tmdev->tsens_addr));
		writel_relaxed(TSENS_S0_MAIN_CFG_INIT_DATA,
			TSENS_S0_MAIN_CONFIG(tmdev->tsens_addr));
		for (i = 0; i < tmdev->tsens_num_sensor; i++) {
			writel_relaxed(TSENS_SN_MIN_MAX_STATUS_CTRL_DATA,
			TSENS_SN_MIN_MAX_STATUS_CTRL(tmdev->tsens_addr)
				+ (tmdev->sensor[i].sensor_hw_num *
						TSENS_SN_ADDR_OFFSET));
			writel_relaxed(TSENS_SN_REMOTE_CFG_DATA,
			TSENS_SN_REMOTE_CONFIG(tmdev->tsens_addr)
				+ (tmdev->sensor[i].sensor_hw_num *
						TSENS_SN_ADDR_OFFSET));
		}
		pr_debug("Local TSENS control initialization\n");
	}
	writel_relaxed(TSENS_INTERRUPT_EN,
		TSENS_UPPER_LOWER_INTERRUPT_CTRL(tmdev->tsens_addr));
}

static int tsens_calib_8x10_sensors(void)
{
	int i, tsens_base0_data = 0, tsens0_point1 = 0, tsens1_point1 = 0;
	int tsens0_point2 = 0, tsens1_point2 = 0;
	int tsens_base1_data = 0, tsens_calibration_mode = 0;
	uint32_t calib_data[2];
	uint32_t calib_tsens_point1_data[2], calib_tsens_point2_data[2];

	if (tmdev->calibration_less_mode)
		goto calibration_less_mode;

	calib_data[0] = readl_relaxed(
			TSENS_EEPROM_8X10_1(tmdev->tsens_calib_addr));
	calib_data[1] = readl_relaxed(
		(TSENS_EEPROM_8X10_1(tmdev->tsens_calib_addr) +
					TSENS_EEPROM_8X10_1_OFFSET));

	tsens_calibration_mode = (calib_data[0] & TSENS_8X10_TSENS_CAL_SEL)
			>> TSENS_8X10_CAL_SEL_SHIFT;
	pr_debug("calib mode scheme:%x\n", tsens_calibration_mode);

	if ((tsens_calibration_mode == TSENS_TWO_POINT_CALIB) ||
		(tsens_calibration_mode == TSENS_ONE_POINT_CALIB_OPTION_2)) {
		tsens_base0_data = (calib_data[0] & TSENS_8X10_BASE0_MASK);
		tsens0_point1 = (calib_data[0] & TSENS0_8X10_POINT1_MASK) >>
				TSENS0_8X10_POINT1_SHIFT;
		tsens1_point1 = calib_data[1] & TSENS1_8X10_POINT1_MASK;
	} else
		goto calibration_less_mode;

	if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
		tsens_base1_data = (calib_data[0] & TSENS_8X10_BASE1_MASK) >>
				TSENS_8X10_BASE1_SHIFT;
		tsens0_point2 = (calib_data[0] & TSENS0_8X10_POINT2_MASK) >>
				TSENS0_8X10_POINT2_SHIFT;
		tsens1_point2 = (calib_data[1] & TSENS1_8X10_POINT2_MASK) >>
				TSENS1_8X10_POINT2_SHIFT;
	}

	if (tsens_calibration_mode == 0) {
calibration_less_mode:
		pr_debug("TSENS is calibrationless mode\n");
		for (i = 0; i < tmdev->tsens_num_sensor; i++)
			calib_tsens_point2_data[i] = 780;
		calib_tsens_point1_data[0] = 595;
		calib_tsens_point1_data[1] = 629;
		goto compute_intercept_slope;
	}

	if ((tsens_calibration_mode == TSENS_ONE_POINT_CALIB_OPTION_2) ||
			(tsens_calibration_mode == TSENS_TWO_POINT_CALIB)) {
		calib_tsens_point1_data[0] =
			((((tsens_base0_data) + tsens0_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[1] =
			((((tsens_base0_data) + tsens1_point1) << 2) |
						TSENS_BIT_APPEND);
	}

	if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
		pr_debug("two point calibration calculation\n");
		calib_tsens_point2_data[0] =
			(((tsens_base1_data + tsens0_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[1] =
			(((tsens_base1_data + tsens1_point2) << 2) |
					TSENS_BIT_APPEND);
	}

compute_intercept_slope:
	for (i = 0; i < tmdev->tsens_num_sensor; i++) {
		int32_t num = 0, den = 0;
		tmdev->sensor[i].calib_data_point2 = calib_tsens_point2_data[i];
		tmdev->sensor[i].calib_data_point1 = calib_tsens_point1_data[i];
		pr_debug("sensor:%d - calib_data_point1:0x%x, calib_data_point2:0x%x\n",
			i, tmdev->sensor[i].calib_data_point1,
			tmdev->sensor[i].calib_data_point2);
		if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
			/* slope (m) = adc_code2 - adc_code1 (y2 - y1)/
				temp_120_degc - temp_30_degc (x2 - x1) */
			num = tmdev->sensor[i].calib_data_point2 -
					tmdev->sensor[i].calib_data_point1;
			num *= tmdev->tsens_factor;
			den = TSENS_CAL_DEGC_POINT2 - TSENS_CAL_DEGC_POINT1;
			tmdev->sensor[i].slope_mul_tsens_factor = num/den;
		}
		tmdev->sensor[i].offset = (tmdev->sensor[i].calib_data_point1 *
			tmdev->tsens_factor) - (TSENS_CAL_DEGC_POINT1 *
				tmdev->sensor[i].slope_mul_tsens_factor);
		INIT_WORK(&tmdev->sensor[i].work, notify_uspace_tsens_fn);
		tmdev->prev_reading_avail = false;
	}

	return 0;
}

static int tsens_calib_8x26_sensors(void)
{
	int i, tsens_base0_data = 0, tsens0_point1 = 0, tsens1_point1 = 0;
	int tsens2_point1 = 0, tsens3_point1 = 0, tsens4_point1 = 0;
	int tsens5_point1 = 0, tsens6_point1 = 0, tsens6_point2 = 0;
	int tsens0_point2 = 0, tsens1_point2 = 0, tsens2_point2 = 0;
	int tsens3_point2 = 0, tsens4_point2 = 0, tsens5_point2 = 0;
	int tsens_base1_data = 0, tsens_calibration_mode = 0;
	uint32_t calib_data[6];
	uint32_t calib_tsens_point1_data[7], calib_tsens_point2_data[7];

	if (tmdev->calibration_less_mode)
		goto calibration_less_mode;

	for (i = 0; i < TSENS_8X26_MAIN_CALIB_ADDR_RANGE; i++)
		calib_data[i] = readl_relaxed(
			(TSENS_EEPROM_8X26_1(tmdev->tsens_calib_addr))
					+ (i * TSENS_SN_ADDR_OFFSET));
	calib_data[4] = readl_relaxed(
			(TSENS_EEPROM_8X26_2(tmdev->tsens_calib_addr)));
	calib_data[5] = readl_relaxed(
			(TSENS_EEPROM_8X26_2(tmdev->tsens_calib_addr)) + 0x8);

	tsens_calibration_mode = (calib_data[5] & TSENS_8X26_TSENS_CAL_SEL)
			>> TSENS_8X26_CAL_SEL_SHIFT;
	pr_debug("calib mode scheme:%x\n", tsens_calibration_mode);

	if ((tsens_calibration_mode == TSENS_TWO_POINT_CALIB) ||
		(tsens_calibration_mode == TSENS_ONE_POINT_CALIB_OPTION_2)) {
		tsens_base0_data = (calib_data[0] & TSENS_8X26_BASE0_MASK)
				>> TSENS_8X26_BASE0_SHIFT;
		tsens0_point1 = (calib_data[0] & TSENS0_8X26_POINT1_MASK) >>
				TSENS0_8X26_POINT1_SHIFT;
		tsens1_point1 = calib_data[1] & TSENS1_8X26_POINT1_MASK;
		tsens2_point1 = (calib_data[1] & TSENS2_8X26_POINT1_MASK) >>
				TSENS2_8X26_POINT1_SHIFT;
		tsens3_point1 = (calib_data[1] & TSENS3_8X26_POINT1_MASK) >>
				TSENS3_8X26_POINT1_SHIFT;
		tsens4_point1 = (calib_data[1] & TSENS4_8X26_POINT1_MASK) >>
				TSENS4_8X26_POINT1_SHIFT;
		tsens5_point1 = (calib_data[1] & TSENS5_8X26_POINT1_MASK) >>
				TSENS5_8X26_POINT1_SHIFT;
		tsens6_point1 = (calib_data[2] & TSENS6_8X26_POINT1_MASK) >>
				TSENS6_8X26_POINT1_SHIFT;
	} else
		goto calibration_less_mode;

	if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
		tsens_base1_data = (calib_data[3] & TSENS_8X26_BASE1_MASK);
		tsens0_point2 = (calib_data[3] & TSENS0_8X26_POINT2_MASK) >>
				TSENS0_8X26_POINT2_SHIFT;
		tsens1_point2 = (calib_data[3] & TSENS1_8X26_POINT2_MASK) >>
				TSENS1_8X26_POINT2_SHIFT;
		tsens2_point2 = (calib_data[3] & TSENS2_8X26_POINT2_MASK) >>
				TSENS2_8X26_POINT2_SHIFT;
		tsens3_point2 = (calib_data[3] & TSENS3_8X26_POINT2_MASK) >>
				TSENS3_8X26_POINT2_SHIFT;
		tsens4_point2 = (calib_data[4] & TSENS4_8X26_POINT2_MASK) >>
				TSENS4_8X26_POINT2_SHIFT;
		tsens5_point2 = (calib_data[4] & TSENS5_8X26_POINT2_MASK) >>
				TSENS5_8X26_POINT2_SHIFT;
		tsens6_point2 = (calib_data[5] & TSENS6_8X26_POINT2_MASK) >>
				TSENS6_8X26_POINT2_SHIFT;
	}

	if (tsens_calibration_mode == 0) {
calibration_less_mode:
		pr_debug("TSENS is calibrationless mode\n");
		for (i = 0; i < tmdev->tsens_num_sensor; i++)
			calib_tsens_point2_data[i] = 780;
		calib_tsens_point1_data[0] = 595;
		calib_tsens_point1_data[1] = 625;
		calib_tsens_point1_data[2] = 553;
		calib_tsens_point1_data[3] = 578;
		calib_tsens_point1_data[4] = 505;
		calib_tsens_point1_data[5] = 509;
		calib_tsens_point1_data[6] = 507;
		goto compute_intercept_slope;
	}

	if ((tsens_calibration_mode == TSENS_ONE_POINT_CALIB_OPTION_2) ||
			(tsens_calibration_mode == TSENS_TWO_POINT_CALIB)) {
		calib_tsens_point1_data[0] =
			((((tsens_base0_data) + tsens0_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[1] =
			((((tsens_base0_data) + tsens1_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[2] =
			((((tsens_base0_data) + tsens2_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[3] =
			((((tsens_base0_data) + tsens3_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[4] =
			((((tsens_base0_data) + tsens4_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[5] =
			((((tsens_base0_data) + tsens5_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[6] =
			((((tsens_base0_data) + tsens6_point1) << 2) |
						TSENS_BIT_APPEND);
	}

	if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
		pr_debug("two point calibration calculation\n");
		calib_tsens_point2_data[0] =
			(((tsens_base1_data + tsens0_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[1] =
			(((tsens_base1_data + tsens1_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[2] =
			(((tsens_base1_data + tsens2_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[3] =
			(((tsens_base1_data + tsens3_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[4] =
			(((tsens_base1_data + tsens4_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[5] =
			(((tsens_base1_data + tsens5_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[6] =
			(((tsens_base1_data + tsens6_point2) << 2) |
					TSENS_BIT_APPEND);
	}

compute_intercept_slope:
	for (i = 0; i < tmdev->tsens_num_sensor; i++) {
		int32_t num = 0, den = 0;
		tmdev->sensor[i].calib_data_point2 = calib_tsens_point2_data[i];
		tmdev->sensor[i].calib_data_point1 = calib_tsens_point1_data[i];
		pr_debug("sensor:%d - calib_data_point1:0x%x, calib_data_point2:0x%x\n",
			i, tmdev->sensor[i].calib_data_point1,
			tmdev->sensor[i].calib_data_point2);
		if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
			/* slope (m) = adc_code2 - adc_code1 (y2 - y1)/
				temp_120_degc - temp_30_degc (x2 - x1) */
			num = tmdev->sensor[i].calib_data_point2 -
					tmdev->sensor[i].calib_data_point1;
			num *= tmdev->tsens_factor;
			den = TSENS_CAL_DEGC_POINT2 - TSENS_CAL_DEGC_POINT1;
			tmdev->sensor[i].slope_mul_tsens_factor = num/den;
		}
		tmdev->sensor[i].offset = (tmdev->sensor[i].calib_data_point1 *
			tmdev->tsens_factor) - (TSENS_CAL_DEGC_POINT1 *
				tmdev->sensor[i].slope_mul_tsens_factor);
		INIT_WORK(&tmdev->sensor[i].work, notify_uspace_tsens_fn);
		tmdev->prev_reading_avail = false;
	}

	return 0;
}

static int tsens_calib_8974_sensors(void)
{
	int i, tsens_base1_data = 0, tsens0_point1 = 0, tsens1_point1 = 0;
	int tsens2_point1 = 0, tsens3_point1 = 0, tsens4_point1 = 0;
	int tsens5_point1 = 0, tsens6_point1 = 0, tsens7_point1 = 0;
	int tsens8_point1 = 0, tsens9_point1 = 0, tsens10_point1 = 0;
	int tsens0_point2 = 0, tsens1_point2 = 0, tsens2_point2 = 0;
	int tsens3_point2 = 0, tsens4_point2 = 0, tsens5_point2 = 0;
	int tsens6_point2 = 0, tsens7_point2 = 0, tsens8_point2 = 0;
	int tsens9_point2 = 0, tsens10_point2 = 0;
	int tsens_base2_data = 0, tsens_calibration_mode = 0, temp = 0;
	uint32_t calib_data[6], calib_redun_sel, calib_data_backup[4];
	uint32_t calib_tsens_point1_data[11], calib_tsens_point2_data[11];

	if (tmdev->calibration_less_mode)
		goto calibration_less_mode;

	calib_redun_sel = readl_relaxed(
			TSENS_EEPROM_REDUNDANCY_SEL(tmdev->tsens_calib_addr));
	calib_redun_sel = calib_redun_sel & TSENS_QFPROM_BACKUP_REDUN_SEL;
	calib_redun_sel >>= TSENS_QFPROM_BACKUP_REDUN_SHIFT;
	pr_debug("calib_redun_sel:%x\n", calib_redun_sel);

	for (i = 0; i < TSENS_MAIN_CALIB_ADDR_RANGE; i++) {
		calib_data[i] = readl_relaxed(
			(TSENS_EEPROM(tmdev->tsens_calib_addr))
					+ (i * TSENS_SN_ADDR_OFFSET));
		pr_debug("calib raw data row%d:0x%x\n", i, calib_data[i]);
	}

	if (calib_redun_sel == TSENS_QFPROM_BACKUP_SEL) {
		tsens_calibration_mode = (calib_data[4] & TSENS_CAL_SEL_0_1)
				>> TSENS_CAL_SEL_SHIFT;
		temp = (calib_data[5] & TSENS_CAL_SEL_2)
				>> TSENS_CAL_SEL_SHIFT_2;
		tsens_calibration_mode |= temp;
		pr_debug("backup calib mode:%x\n", calib_redun_sel);

		for (i = 0; i < TSENS_BACKUP_CALIB_ADDR_RANGE; i++)
			calib_data_backup[i] = readl_relaxed(
				(TSENS_EEPROM_BACKUP_REGION(
					tmdev->tsens_calib_addr))
				+ (i * TSENS_SN_ADDR_OFFSET));

		if ((tsens_calibration_mode == TSENS_ONE_POINT_CALIB)
				|| (tsens_calibration_mode ==
				TSENS_TWO_POINT_CALIB) ||
				(tsens_calibration_mode ==
				TSENS_ONE_POINT_CALIB_OPTION_2)) {
			tsens_base1_data = (calib_data_backup[0] &
						TSENS_BASE1_MASK);
			tsens0_point1 = (calib_data_backup[0] &
						TSENS0_POINT1_MASK) >>
						TSENS0_POINT1_SHIFT;
			tsens1_point1 = (calib_data_backup[0] &
				TSENS1_POINT1_MASK) >> TSENS1_POINT1_SHIFT;
			tsens2_point1 = (calib_data_backup[0] &
				TSENS2_POINT1_MASK) >> TSENS2_POINT1_SHIFT;
			tsens3_point1 = (calib_data_backup[0] &
				TSENS3_POINT1_MASK) >> TSENS3_POINT1_SHIFT;
			tsens4_point1 = (calib_data_backup[1] &
				TSENS4_POINT1_MASK);
			tsens5_point1 = (calib_data_backup[1] &
				TSENS5_POINT1_MASK) >> TSENS5_POINT1_SHIFT;
			tsens6_point1 = (calib_data_backup[1] &
				TSENS6_POINT1_MASK) >> TSENS6_POINT1_SHIFT;
			tsens7_point1 = (calib_data_backup[1] &
				TSENS7_POINT1_MASK) >> TSENS7_POINT1_SHIFT;
			tsens8_point1 = (calib_data_backup[2] &
						TSENS8_POINT1_MASK_BACKUP) >>
						TSENS8_POINT1_SHIFT;
			tsens9_point1 = (calib_data_backup[2] &
					TSENS9_POINT1_MASK_BACKUP) >>
					TSENS9_POINT1_BACKUP_SHIFT;
			tsens10_point1 = (calib_data_backup[2] &
				TSENS10_POINT1_MASK_BACKUP) >>
				TSENS10_POINT1_BACKUP_SHIFT;
		} else
			goto calibration_less_mode;

		if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
			tsens_base2_data = (calib_data_backup[2] &
				TSENS_BASE2_BACKUP_MASK) >>
				TSENS_POINT2_BASE_BACKUP_SHIFT;
			tsens0_point2 = (calib_data_backup[2] &
					TSENS0_POINT2_BACKUP_MASK) >>
					TSENS0_POINT2_BACKUP_SHIFT;
			tsens1_point2 = (calib_data_backup[3] &
					TSENS1_POINT2_BACKUP_MASK);
			tsens2_point2 = (calib_data_backup[3] &
					TSENS2_POINT2_BACKUP_MASK) >>
					TSENS2_POINT2_BACKUP_SHIFT;
			tsens3_point2 = (calib_data_backup[3] &
					TSENS3_POINT2_BACKUP_MASK) >>
					TSENS3_POINT2_BACKUP_SHIFT;
			tsens4_point2 = (calib_data_backup[3] &
					TSENS4_POINT2_BACKUP_MASK) >>
					TSENS4_POINT2_BACKUP_SHIFT;
			tsens5_point2 = (calib_data[4] &
					TSENS5_POINT2_BACKUP_MASK) >>
					TSENS5_POINT2_BACKUP_SHIFT;
			tsens6_point2 = (calib_data[5] &
					TSENS6_POINT2_BACKUP_MASK);
			tsens7_point2 = (calib_data[5] &
					TSENS7_POINT2_BACKUP_MASK) >>
					TSENS7_POINT2_BACKUP_SHIFT;
			tsens8_point2 = (calib_data[5] &
					TSENS8_POINT2_BACKUP_MASK) >>
					TSENS8_POINT2_BACKUP_SHIFT;
			tsens9_point2 = (calib_data[5] &
					TSENS9_POINT2_BACKUP_MASK) >>
					TSENS9_POINT2_BACKUP_SHIFT;
			tsens10_point2 = (calib_data[5] &
					TSENS10_POINT2_BACKUP_MASK)
					>> TSENS10_POINT2_BACKUP_SHIFT;
		}
	} else {
		tsens_calibration_mode = (calib_data[1] & TSENS_CAL_SEL_0_1)
			>> TSENS_CAL_SEL_SHIFT;
		temp = (calib_data[3] & TSENS_CAL_SEL_2)
			>> TSENS_CAL_SEL_SHIFT_2;
		tsens_calibration_mode |= temp;
		pr_debug("calib mode scheme:%x\n", tsens_calibration_mode);
		if ((tsens_calibration_mode == TSENS_ONE_POINT_CALIB) ||
			(tsens_calibration_mode ==
					TSENS_ONE_POINT_CALIB_OPTION_2) ||
			(tsens_calibration_mode == TSENS_TWO_POINT_CALIB)) {
			tsens_base1_data = (calib_data[0] & TSENS_BASE1_MASK);
			tsens0_point1 = (calib_data[0] & TSENS0_POINT1_MASK) >>
							TSENS0_POINT1_SHIFT;
			tsens1_point1 = (calib_data[0] & TSENS1_POINT1_MASK) >>
							TSENS1_POINT1_SHIFT;
			tsens2_point1 = (calib_data[0] & TSENS2_POINT1_MASK) >>
							TSENS2_POINT1_SHIFT;
			tsens3_point1 = (calib_data[0] & TSENS3_POINT1_MASK) >>
							TSENS3_POINT1_SHIFT;
			tsens4_point1 = (calib_data[1] & TSENS4_POINT1_MASK);
			tsens5_point1 = (calib_data[1] & TSENS5_POINT1_MASK) >>
							TSENS5_POINT1_SHIFT;
			tsens6_point1 = (calib_data[1] & TSENS6_POINT1_MASK) >>
							TSENS6_POINT1_SHIFT;
			tsens7_point1 = (calib_data[1] & TSENS7_POINT1_MASK) >>
							TSENS7_POINT1_SHIFT;
			tsens8_point1 = (calib_data[1] & TSENS8_POINT1_MASK) >>
							TSENS8_POINT1_SHIFT;
			tsens9_point1 = (calib_data[2] & TSENS9_POINT1_MASK);
			tsens10_point1 = (calib_data[2] & TSENS10_POINT1_MASK)
							>> TSENS10_POINT1_SHIFT;
		} else
			goto calibration_less_mode;

		if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
			tsens_base2_data = (calib_data[2] & TSENS_BASE2_MASK) >>
						TSENS_POINT2_BASE_SHIFT;
			tsens0_point2 = (calib_data[2] & TSENS0_POINT2_MASK) >>
						TSENS0_POINT2_SHIFT;
			tsens1_point2 = (calib_data[2] & TSENS1_POINT2_MASK) >>
						TSENS1_POINT2_SHIFT;
			tsens2_point2 = (calib_data[3] & TSENS2_POINT2_MASK);
			tsens3_point2 = (calib_data[3] & TSENS3_POINT2_MASK) >>
						TSENS3_POINT2_SHIFT;
			tsens4_point2 = (calib_data[3] & TSENS4_POINT2_MASK) >>
						TSENS4_POINT2_SHIFT;
			tsens5_point2 = (calib_data[3] & TSENS5_POINT2_MASK) >>
						TSENS5_POINT2_SHIFT;
			tsens6_point2 = (calib_data[3] & TSENS6_POINT2_MASK) >>
						TSENS6_POINT2_SHIFT;
			tsens7_point2 = (calib_data[4] & TSENS7_POINT2_MASK);
			tsens8_point2 = (calib_data[4] & TSENS8_POINT2_MASK) >>
						TSENS8_POINT2_SHIFT;
			tsens9_point2 = (calib_data[4] & TSENS9_POINT2_MASK) >>
						TSENS9_POINT2_SHIFT;
			tsens10_point2 = (calib_data[4] & TSENS10_POINT2_MASK)
						>> TSENS10_POINT2_SHIFT;
		}

		if (tsens_calibration_mode == 0) {
calibration_less_mode:
			pr_debug("TSENS is calibrationless mode\n");
			for (i = 0; i < tmdev->tsens_num_sensor; i++)
				calib_tsens_point2_data[i] = 780;
			calib_tsens_point1_data[0] = 502;
			calib_tsens_point1_data[1] = 509;
			calib_tsens_point1_data[2] = 503;
			calib_tsens_point1_data[3] = 509;
			calib_tsens_point1_data[4] = 505;
			calib_tsens_point1_data[5] = 509;
			calib_tsens_point1_data[6] = 507;
			calib_tsens_point1_data[7] = 510;
			calib_tsens_point1_data[8] = 508;
			calib_tsens_point1_data[9] = 509;
			calib_tsens_point1_data[10] = 508;
			goto compute_intercept_slope;
		}
	}

	if (tsens_calibration_mode == TSENS_ONE_POINT_CALIB) {
		calib_tsens_point1_data[0] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens0_point1;
		calib_tsens_point1_data[1] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens1_point1;
		calib_tsens_point1_data[2] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens2_point1;
		calib_tsens_point1_data[3] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens3_point1;
		calib_tsens_point1_data[4] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens4_point1;
		calib_tsens_point1_data[5] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens5_point1;
		calib_tsens_point1_data[6] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens6_point1;
		calib_tsens_point1_data[7] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens7_point1;
		calib_tsens_point1_data[8] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens8_point1;
		calib_tsens_point1_data[9] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens9_point1;
		calib_tsens_point1_data[10] =
			(((tsens_base1_data) << 2) | TSENS_BIT_APPEND)
							+ tsens10_point1;
	}

	if ((tsens_calibration_mode == TSENS_ONE_POINT_CALIB_OPTION_2) ||
			(tsens_calibration_mode == TSENS_TWO_POINT_CALIB)) {
		pr_debug("one point calibration calculation\n");
		calib_tsens_point1_data[0] =
			((((tsens_base1_data) + tsens0_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[1] =
			((((tsens_base1_data) + tsens1_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[2] =
			((((tsens_base1_data) + tsens2_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[3] =
			((((tsens_base1_data) + tsens3_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[4] =
			((((tsens_base1_data) + tsens4_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[5] =
			((((tsens_base1_data) + tsens5_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[6] =
			((((tsens_base1_data) + tsens6_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[7] =
			((((tsens_base1_data) + tsens7_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[8] =
			((((tsens_base1_data) + tsens8_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[9] =
			((((tsens_base1_data) + tsens9_point1) << 2) |
						TSENS_BIT_APPEND);
		calib_tsens_point1_data[10] =
			((((tsens_base1_data) + tsens10_point1) << 2) |
						TSENS_BIT_APPEND);
	}

	if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
		pr_debug("two point calibration calculation\n");
		calib_tsens_point2_data[0] =
			(((tsens_base2_data + tsens0_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[1] =
			(((tsens_base2_data + tsens1_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[2] =
			(((tsens_base2_data + tsens2_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[3] =
			(((tsens_base2_data + tsens3_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[4] =
			(((tsens_base2_data + tsens4_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[5] =
			(((tsens_base2_data + tsens5_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[6] =
			(((tsens_base2_data + tsens6_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[7] =
			(((tsens_base2_data + tsens7_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[8] =
			(((tsens_base2_data + tsens8_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[9] =
			(((tsens_base2_data + tsens9_point2) << 2) |
					TSENS_BIT_APPEND);
		calib_tsens_point2_data[10] =
			(((tsens_base2_data + tsens10_point2) << 2) |
					TSENS_BIT_APPEND);
	}

compute_intercept_slope:
	for (i = 0; i < tmdev->tsens_num_sensor; i++) {
		int32_t num = 0, den = 0;
		tmdev->sensor[i].calib_data_point2 = calib_tsens_point2_data[i];
		tmdev->sensor[i].calib_data_point1 = calib_tsens_point1_data[i];
		pr_debug("sensor:%d - calib_data_point1:0x%x, calib_data_point2:0x%x\n",
			i, tmdev->sensor[i].calib_data_point1,
			tmdev->sensor[i].calib_data_point2);
		if (tsens_calibration_mode == TSENS_TWO_POINT_CALIB) {
			/* slope (m) = adc_code2 - adc_code1 (y2 - y1)/
				temp_120_degc - temp_30_degc (x2 - x1) */
			num = tmdev->sensor[i].calib_data_point2 -
					tmdev->sensor[i].calib_data_point1;
			num *= tmdev->tsens_factor;
			den = TSENS_CAL_DEGC_POINT2 - TSENS_CAL_DEGC_POINT1;
			tmdev->sensor[i].slope_mul_tsens_factor = num/den;
		}
		tmdev->sensor[i].offset = (tmdev->sensor[i].calib_data_point1 *
			tmdev->tsens_factor) - (TSENS_CAL_DEGC_POINT1 *
				tmdev->sensor[i].slope_mul_tsens_factor);
		pr_debug("offset:%d\n", tmdev->sensor[i].offset);
		INIT_WORK(&tmdev->sensor[i].work, notify_uspace_tsens_fn);
		tmdev->prev_reading_avail = false;
	}

	return 0;
}

static int tsens_calib_sensors(void)
{
	int rc = 0;

	if (!tmdev)
		return -ENODEV;

	if (tmdev->calib_mode == TSENS_CALIB_FUSE_MAP_8974)
		rc = tsens_calib_8974_sensors();
	else if (tmdev->calib_mode == TSENS_CALIB_FUSE_MAP_8X26)
		rc = tsens_calib_8x26_sensors();
	else if (tmdev->calib_mode == TSENS_CALIB_FUSE_MAP_8X10)
		rc = tsens_calib_8x10_sensors();
	else
		rc = -ENODEV;

	return rc;
}

static int get_device_tree_data(struct platform_device *pdev)
{
	const struct device_node *of_node = pdev->dev.of_node;
	struct resource *res_mem = NULL;
	u32 *tsens_slope_data;
	u32 *sensor_id;
	u32 rc = 0, i, tsens_num_sensors, calib_type;
	const char *tsens_calib_mode;

	rc = of_property_read_u32(of_node,
			"qcom,sensors", &tsens_num_sensors);
	if (rc) {
		dev_err(&pdev->dev, "missing sensor number\n");
		return -ENODEV;
	}

	tsens_slope_data = devm_kzalloc(&pdev->dev,
			tsens_num_sensors * sizeof(u32), GFP_KERNEL);
	if (!tsens_slope_data) {
		dev_err(&pdev->dev, "can not allocate slope data\n");
		return -ENOMEM;
	}

	rc = of_property_read_u32_array(of_node,
		"qcom,slope", tsens_slope_data, tsens_num_sensors);
	if (rc) {
		dev_err(&pdev->dev, "invalid or missing property: tsens-slope\n");
		return rc;
	};

	tsens_calib_mode = of_get_property(of_node,
			"qcom,calib-mode", NULL);
	if (!strncmp(tsens_calib_mode, "fuse_map1", 9))
		calib_type = TSENS_CALIB_FUSE_MAP_8974;
	else if (!strncmp(tsens_calib_mode, "fuse_map2", 9))
		calib_type = TSENS_CALIB_FUSE_MAP_8X26;
	else if (!strncmp(tsens_calib_mode, "fuse_map3", 9))
		calib_type = TSENS_CALIB_FUSE_MAP_8X10;
	else {
		pr_err("%s: Invalid calibration property\n", __func__);
		return -EINVAL;
	}

	tmdev = devm_kzalloc(&pdev->dev,
			sizeof(struct tsens_tm_device) +
			tsens_num_sensors *
			sizeof(struct tsens_tm_device_sensor),
			GFP_KERNEL);
	if (tmdev == NULL) {
		pr_err("%s: kzalloc() failed.\n", __func__);
		return -ENOMEM;
	}

	for (i = 0; i < tsens_num_sensors; i++)
		tmdev->sensor[i].slope_mul_tsens_factor = tsens_slope_data[i];
	tmdev->tsens_factor = TSENS_SLOPE_FACTOR;
	tmdev->tsens_num_sensor = tsens_num_sensors;
	tmdev->calibration_less_mode = of_property_read_bool(of_node,
				"qcom,calibration-less-mode");
	tmdev->calib_mode = calib_type;
	tmdev->tsens_local_init = of_property_read_bool(of_node,
				"qcom,tsens-local-init");

	sensor_id = devm_kzalloc(&pdev->dev,
		tsens_num_sensors * sizeof(u32), GFP_KERNEL);
	if (!sensor_id) {
		dev_err(&pdev->dev, "can not allocate sensor id\n");
		return -ENOMEM;
	}

	rc = of_property_read_u32_array(of_node,
		"qcom,sensor-id", sensor_id, tsens_num_sensors);
	if (rc) {
		pr_debug("Default sensor id mapping\n");
		for (i = 0; i < tsens_num_sensors; i++) {
			tmdev->sensor[i].sensor_hw_num = i;
			tmdev->sensor[i].sensor_sw_id = i;
		}
	} else {
		pr_debug("Use specified sensor id mapping\n");
		for (i = 0; i < tsens_num_sensors; i++) {
			tmdev->sensor[i].sensor_hw_num = sensor_id[i];
			tmdev->sensor[i].sensor_sw_id = i;
		}
	}

	tmdev->tsens_irq = platform_get_irq(pdev, 0);
	if (tmdev->tsens_irq < 0) {
		pr_err("Invalid get irq\n");
		rc = tmdev->tsens_irq;
		goto fail_tmdev;
	}

	/* TSENS register region */
	tmdev->res_tsens_mem = platform_get_resource_byname(pdev,
					IORESOURCE_MEM, "tsens_physical");
	if (!tmdev->res_tsens_mem) {
		pr_err("Could not get tsens physical address resource\n");
		rc = -EINVAL;
		goto fail_tmdev;
	}

	tmdev->tsens_len = tmdev->res_tsens_mem->end -
					tmdev->res_tsens_mem->start + 1;

	res_mem = request_mem_region(tmdev->res_tsens_mem->start,
				tmdev->tsens_len, tmdev->res_tsens_mem->name);
	if (!res_mem) {
		pr_err("Request tsens physical memory region failed\n");
		rc = -EINVAL;
		goto fail_tmdev;
	}

	tmdev->tsens_addr = ioremap(res_mem->start, tmdev->tsens_len);
	if (!tmdev->tsens_addr) {
		pr_err("Failed to IO map TSENS registers.\n");
		rc = -EINVAL;
		goto fail_unmap_tsens_region;
	}

	/* TSENS calibration region */
	tmdev->res_calib_mem = platform_get_resource_byname(pdev,
				IORESOURCE_MEM, "tsens_eeprom_physical");
	if (!tmdev->res_calib_mem) {
		pr_err("Could not get qfprom physical address resource\n");
		rc = -EINVAL;
		goto fail_unmap_tsens;
	}

	tmdev->calib_len = tmdev->res_calib_mem->end -
					tmdev->res_calib_mem->start + 1;

	res_mem = request_mem_region(tmdev->res_calib_mem->start,
				tmdev->calib_len, tmdev->res_calib_mem->name);
	if (!res_mem) {
		pr_err("Request calibration memory region failed\n");
		rc = -EINVAL;
		goto fail_unmap_tsens;
	}

	tmdev->tsens_calib_addr = ioremap(res_mem->start,
						tmdev->calib_len);
	if (!tmdev->tsens_calib_addr) {
		pr_err("Failed to IO map EEPROM registers.\n");
		rc = -EINVAL;
		goto fail_unmap_calib_region;
	}

	return 0;

fail_unmap_calib_region:
	if (tmdev->res_calib_mem)
		release_mem_region(tmdev->res_calib_mem->start,
					tmdev->calib_len);
fail_unmap_tsens:
	if (tmdev->tsens_addr)
		iounmap(tmdev->tsens_addr);
fail_unmap_tsens_region:
	if (tmdev->res_tsens_mem)
		release_mem_region(tmdev->res_tsens_mem->start,
					tmdev->tsens_len);
fail_tmdev:
	tmdev = NULL;
	return rc;
}

static int __devinit tsens_tm_probe(struct platform_device *pdev)
{
	int rc;

	if (tmdev) {
		pr_err("TSENS device already in use\n");
		return -EBUSY;
	}

	if (pdev->dev.of_node) {
		rc = get_device_tree_data(pdev);
		if (rc) {
			pr_err("Error reading TSENS DT\n");
			return rc;
		}
	} else
		return -ENODEV;

	tmdev->pdev = pdev;
	tmdev->tsens_wq = alloc_workqueue("tsens_wq", WQ_HIGHPRI, 0);
	if (!tmdev->tsens_wq) {
		rc = -ENOMEM;
		goto fail;
	}

	rc = tsens_calib_sensors();
	if (rc < 0) {
		pr_err("Calibration failed\n");
		goto fail;
	}

	tsens_hw_init();

	tmdev->prev_reading_avail = true;

	platform_set_drvdata(pdev, tmdev);

	return 0;
fail:
	if (tmdev->tsens_wq)
		destroy_workqueue(tmdev->tsens_wq);
	if (tmdev->tsens_calib_addr)
		iounmap(tmdev->tsens_calib_addr);
	if (tmdev->res_calib_mem)
		release_mem_region(tmdev->res_calib_mem->start,
					tmdev->calib_len);
	if (tmdev->tsens_addr)
		iounmap(tmdev->tsens_addr);
	if (tmdev->res_tsens_mem)
		release_mem_region(tmdev->res_tsens_mem->start,
			tmdev->tsens_len);
	tmdev = NULL;

	return rc;
}

static int __devinit _tsens_register_thermal(void)
{
	struct platform_device *pdev;
	int rc, i;

	if (!tmdev) {
		pr_err("%s: TSENS early init not done\n", __func__);
		return -ENODEV;
	}

	pdev = tmdev->pdev;

	for (i = 0; i < tmdev->tsens_num_sensor; i++) {
		char name[18];
		snprintf(name, sizeof(name), "tsens_tz_sensor%d",
					tmdev->sensor[i].sensor_hw_num);
		tmdev->sensor[i].mode = THERMAL_DEVICE_ENABLED;
		tmdev->sensor[i].tz_dev = thermal_zone_device_register(name,
				TSENS_TRIP_NUM, &tmdev->sensor[i],
				&tsens_thermal_zone_ops, 0, 0, 0, 0);
		if (IS_ERR(tmdev->sensor[i].tz_dev)) {
			pr_err("%s: thermal_zone_device_register() failed.\n",
			__func__);
			rc = -ENODEV;
			goto fail;
		}
	}

	rc = request_irq(tmdev->tsens_irq, tsens_isr,
		IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev);
	if (rc < 0) {
		pr_err("%s: request_irq FAIL: %d\n", __func__, rc);
		for (i = 0; i < tmdev->tsens_num_sensor; i++)
			thermal_zone_device_unregister(tmdev->sensor[i].tz_dev);
		goto fail;
	} else {
		enable_irq_wake(tmdev->tsens_irq);
	}
	platform_set_drvdata(pdev, tmdev);

	INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn);

	return 0;
fail:
	if (tmdev->tsens_calib_addr)
		iounmap(tmdev->tsens_calib_addr);
	if (tmdev->res_calib_mem)
		release_mem_region(tmdev->res_calib_mem->start,
					tmdev->calib_len);
	if (tmdev->tsens_addr)
		iounmap(tmdev->tsens_addr);
	if (tmdev->res_tsens_mem)
		release_mem_region(tmdev->res_tsens_mem->start,
			tmdev->tsens_len);
	return rc;
}

static int __devexit tsens_tm_remove(struct platform_device *pdev)
{
	struct tsens_tm_device *tmdev = platform_get_drvdata(pdev);
	int i;

	for (i = 0; i < tmdev->tsens_num_sensor; i++)
		thermal_zone_device_unregister(tmdev->sensor[i].tz_dev);
	if (tmdev->tsens_calib_addr)
		iounmap(tmdev->tsens_calib_addr);
	if (tmdev->res_calib_mem)
		release_mem_region(tmdev->res_calib_mem->start,
					tmdev->calib_len);
	if (tmdev->tsens_addr)
		iounmap(tmdev->tsens_addr);
	if (tmdev->res_tsens_mem)
		release_mem_region(tmdev->res_tsens_mem->start,
			tmdev->tsens_len);
	free_irq(tmdev->tsens_irq, tmdev);
	destroy_workqueue(tmdev->tsens_wq);
	platform_set_drvdata(pdev, NULL);

	return 0;
}

static struct of_device_id tsens_match[] = {
	{	.compatible = "qcom,msm-tsens",
	},
	{}
};

static struct platform_driver tsens_tm_driver = {
	.probe = tsens_tm_probe,
	.remove = tsens_tm_remove,
	.driver = {
		.name = "msm-tsens",
		.owner = THIS_MODULE,
		.of_match_table = tsens_match,
	},
};

int __init tsens_tm_init_driver(void)
{
	return platform_driver_register(&tsens_tm_driver);
}

static int __init tsens_thermal_register(void)
{
	return _tsens_register_thermal();
}
module_init(tsens_thermal_register);

static void __exit _tsens_tm_remove(void)
{
	platform_driver_unregister(&tsens_tm_driver);
}
module_exit(_tsens_tm_remove);

MODULE_ALIAS("platform:" TSENS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");