Merge remote branch 'wireless-next/master' into ath6kl-next
Conflicts:
drivers/net/wireless/ath/ath6kl/init.c
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 0735488..0960224 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -1,6 +1,6 @@
menuconfig ATH_COMMON
tristate "Atheros Wireless Cards"
- depends on CFG80211
+ depends on CFG80211 && (!UML || BROKEN)
---help---
This will enable the support for the Atheros wireless drivers.
ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index fe4bf4d..c1d699f 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -152,6 +152,7 @@
struct ath_cycle_counters cc_survey;
struct ath_regulatory regulatory;
+ struct ath_regulatory reg_world_copy;
const struct ath_ops *ops;
const struct ath_bus_ops *bus_ops;
@@ -173,8 +174,7 @@
void ath_hw_cycle_counters_update(struct ath_common *common);
int32_t ath_hw_get_listen_time(struct ath_common *common);
-extern __attribute__((format (printf, 2, 3)))
-void ath_printk(const char *level, const char *fmt, ...);
+extern __printf(2, 3) void ath_printk(const char *level, const char *fmt, ...);
#define _ath_printk(level, common, fmt, ...) \
do { \
@@ -215,6 +215,10 @@
* @ATH_DBG_HWTIMER: hardware timer handling
* @ATH_DBG_BTCOEX: bluetooth coexistance
* @ATH_DBG_BSTUCK: stuck beacons
+ * @ATH_DBG_MCI: Message Coexistence Interface, a private protocol
+ * used exclusively for WLAN-BT coexistence starting from
+ * AR9462.
+ * @ATH_DBG_DFS: radar datection
* @ATH_DBG_ANY: enable all debugging
*
* The debug level is used to control the amount and type of debugging output
@@ -241,6 +245,7 @@
ATH_DBG_WMI = 0x00004000,
ATH_DBG_BSTUCK = 0x00008000,
ATH_DBG_MCI = 0x00010000,
+ ATH_DBG_DFS = 0x00020000,
ATH_DBG_ANY = 0xffffffff
};
@@ -259,7 +264,7 @@
#else
-static inline __attribute__((format (printf, 3, 4)))
+static inline __attribute__ ((format (printf, 3, 4)))
void ath_dbg(struct ath_common *common, enum ATH_DEBUG dbg_mask,
const char *fmt, ...)
{
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
index e5be7e70..ee7ea57 100644
--- a/drivers/net/wireless/ath/ath5k/ahb.c
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -166,7 +166,9 @@
if (to_platform_device(ah->dev)->id == 0 &&
(bcfg->config->flags & (BD_WLAN0 | BD_WLAN1)) ==
(BD_WLAN1 | BD_WLAN0))
- __set_bit(ATH_STAT_2G_DISABLED, ah->status);
+ ah->ah_capabilities.cap_needs_2GHz_ovr = true;
+ else
+ ah->ah_capabilities.cap_needs_2GHz_ovr = false;
}
ret = ath5k_init_ah(ah, &ath_ahb_bus_ops);
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
index bea90e6..bf67416 100644
--- a/drivers/net/wireless/ath/ath5k/ani.c
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -27,15 +27,21 @@
* or reducing sensitivity as necessary.
*
* The parameters are:
+ *
* - "noise immunity"
+ *
* - "spur immunity"
+ *
* - "firstep level"
+ *
* - "OFDM weak signal detection"
+ *
* - "CCK weak signal detection"
*
* Basically we look at the amount of ODFM and CCK timing errors we get and then
* raise or lower immunity accordingly by setting one or more of these
* parameters.
+ *
* Newer chipsets have PHY error counters in hardware which will generate a MIB
* interrupt when they overflow. Older hardware has too enable PHY error frames
* by setting a RX flag and then count every single PHY error. When a specified
@@ -45,11 +51,13 @@
*/
-/*** ANI parameter control ***/
+/***********************\
+* ANI parameter control *
+\***********************/
/**
* ath5k_ani_set_noise_immunity_level() - Set noise immunity level
- *
+ * @ah: The &struct ath5k_hw
* @level: level between 0 and @ATH5K_ANI_MAX_NOISE_IMM_LVL
*/
void
@@ -91,12 +99,11 @@
ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level);
}
-
/**
* ath5k_ani_set_spur_immunity_level() - Set spur immunity level
- *
+ * @ah: The &struct ath5k_hw
* @level: level between 0 and @max_spur_level (the maximum level is dependent
- * on the chip revision).
+ * on the chip revision).
*/
void
ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
@@ -117,10 +124,9 @@
ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level);
}
-
/**
* ath5k_ani_set_firstep_level() - Set "firstep" level
- *
+ * @ah: The &struct ath5k_hw
* @level: level between 0 and @ATH5K_ANI_MAX_FIRSTEP_LVL
*/
void
@@ -140,11 +146,9 @@
ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_ANI, "new level %d", level);
}
-
/**
- * ath5k_ani_set_ofdm_weak_signal_detection() - Control OFDM weak signal
- * detection
- *
+ * ath5k_ani_set_ofdm_weak_signal_detection() - Set OFDM weak signal detection
+ * @ah: The &struct ath5k_hw
* @on: turn on or off
*/
void
@@ -182,10 +186,9 @@
on ? "on" : "off");
}
-
/**
- * ath5k_ani_set_cck_weak_signal_detection() - control CCK weak signal detection
- *
+ * ath5k_ani_set_cck_weak_signal_detection() - Set CCK weak signal detection
+ * @ah: The &struct ath5k_hw
* @on: turn on or off
*/
void
@@ -200,13 +203,16 @@
}
-/*** ANI algorithm ***/
+/***************\
+* ANI algorithm *
+\***************/
/**
* ath5k_ani_raise_immunity() - Increase noise immunity
- *
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
* @ofdm_trigger: If this is true we are called because of too many OFDM errors,
- * the algorithm will tune more parameters then.
+ * the algorithm will tune more parameters then.
*
* Try to raise noise immunity (=decrease sensitivity) in several steps
* depending on the average RSSI of the beacons we received.
@@ -290,9 +296,10 @@
*/
}
-
/**
* ath5k_ani_lower_immunity() - Decrease noise immunity
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
*
* Try to lower noise immunity (=increase sensitivity) in several steps
* depending on the average RSSI of the beacons we received.
@@ -352,9 +359,10 @@
}
}
-
/**
* ath5k_hw_ani_get_listen_time() - Update counters and return listening time
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
*
* Return an approximation of the time spent "listening" in milliseconds (ms)
* since the last call of this function.
@@ -379,9 +387,10 @@
return listen;
}
-
/**
* ath5k_ani_save_and_clear_phy_errors() - Clear and save PHY error counters
+ * @ah: The &struct ath5k_hw
+ * @as: The &struct ath5k_ani_state
*
* Clear the PHY error counters as soon as possible, since this might be called
* from a MIB interrupt and we want to make sure we don't get interrupted again.
@@ -429,14 +438,14 @@
return 1;
}
-
/**
* ath5k_ani_period_restart() - Restart ANI period
+ * @as: The &struct ath5k_ani_state
*
* Just reset counters, so they are clear for the next "ani period".
*/
static void
-ath5k_ani_period_restart(struct ath5k_hw *ah, struct ath5k_ani_state *as)
+ath5k_ani_period_restart(struct ath5k_ani_state *as)
{
/* keep last values for debugging */
as->last_ofdm_errors = as->ofdm_errors;
@@ -448,9 +457,9 @@
as->listen_time = 0;
}
-
/**
* ath5k_ani_calibration() - The main ANI calibration function
+ * @ah: The &struct ath5k_hw
*
* We count OFDM and CCK errors relative to the time where we did not send or
* receive ("listen" time) and raise or lower immunity accordingly.
@@ -492,7 +501,7 @@
/* too many PHY errors - we have to raise immunity */
bool ofdm_flag = as->ofdm_errors > ofdm_high ? true : false;
ath5k_ani_raise_immunity(ah, as, ofdm_flag);
- ath5k_ani_period_restart(ah, as);
+ ath5k_ani_period_restart(as);
} else if (as->listen_time > 5 * ATH5K_ANI_LISTEN_PERIOD) {
/* If more than 5 (TODO: why 5?) periods have passed and we got
@@ -504,15 +513,18 @@
if (as->ofdm_errors <= ofdm_low && as->cck_errors <= cck_low)
ath5k_ani_lower_immunity(ah, as);
- ath5k_ani_period_restart(ah, as);
+ ath5k_ani_period_restart(as);
}
}
-/*** INTERRUPT HANDLER ***/
+/*******************\
+* Interrupt handler *
+\*******************/
/**
* ath5k_ani_mib_intr() - Interrupt handler for ANI MIB counters
+ * @ah: The &struct ath5k_hw
*
* Just read & reset the registers quickly, so they don't generate more
* interrupts, save the counters and schedule the tasklet to decide whether
@@ -549,9 +561,11 @@
tasklet_schedule(&ah->ani_tasklet);
}
-
/**
- * ath5k_ani_phy_error_report() - Used by older HW to report PHY errors
+ * ath5k_ani_phy_error_report - Used by older HW to report PHY errors
+ *
+ * @ah: The &struct ath5k_hw
+ * @phyerr: One of enum ath5k_phy_error_code
*
* This is used by hardware without PHY error counters to report PHY errors
* on a frame-by-frame basis, instead of the interrupt.
@@ -574,10 +588,13 @@
}
-/*** INIT ***/
+/****************\
+* Initialization *
+\****************/
/**
* ath5k_enable_phy_err_counters() - Enable PHY error counters
+ * @ah: The &struct ath5k_hw
*
* Enable PHY error counters for OFDM and CCK timing errors.
*/
@@ -596,9 +613,9 @@
ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
}
-
/**
* ath5k_disable_phy_err_counters() - Disable PHY error counters
+ * @ah: The &struct ath5k_hw
*
* Disable PHY error counters for OFDM and CCK timing errors.
*/
@@ -615,10 +632,10 @@
ath5k_hw_reg_write(ah, 0, AR5K_CCK_FIL_CNT);
}
-
/**
* ath5k_ani_init() - Initialize ANI
- * @mode: Which mode to use (auto, manual high, manual low, off)
+ * @ah: The &struct ath5k_hw
+ * @mode: One of enum ath5k_ani_mode
*
* Initialize ANI according to mode.
*/
@@ -695,10 +712,18 @@
}
-/*** DEBUG ***/
+/**************\
+* Debug output *
+\**************/
#ifdef CONFIG_ATH5K_DEBUG
+/**
+ * ath5k_ani_print_counters() - Print ANI counters
+ * @ah: The &struct ath5k_hw
+ *
+ * Used for debugging ANI
+ */
void
ath5k_ani_print_counters(struct ath5k_hw *ah)
{
diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h
index 7358b6c..21aa355 100644
--- a/drivers/net/wireless/ath/ath5k/ani.h
+++ b/drivers/net/wireless/ath/ath5k/ani.h
@@ -40,13 +40,13 @@
* enum ath5k_ani_mode - mode for ANI / noise sensitivity
*
* @ATH5K_ANI_MODE_OFF: Turn ANI off. This can be useful to just stop the ANI
- * algorithm after it has been on auto mode.
- * ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low,
- * maximizing sensitivity. ANI will not run.
- * ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high,
- * minimizing sensitivity. ANI will not run.
- * ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the
- * amount of OFDM and CCK frame errors (default).
+ * algorithm after it has been on auto mode.
+ * @ATH5K_ANI_MODE_MANUAL_LOW: Manually set all immunity parameters to low,
+ * maximizing sensitivity. ANI will not run.
+ * @ATH5K_ANI_MODE_MANUAL_HIGH: Manually set all immunity parameters to high,
+ * minimizing sensitivity. ANI will not run.
+ * @ATH5K_ANI_MODE_AUTO: Automatically control immunity parameters based on the
+ * amount of OFDM and CCK frame errors (default).
*/
enum ath5k_ani_mode {
ATH5K_ANI_MODE_OFF = 0,
@@ -58,8 +58,22 @@
/**
* struct ath5k_ani_state - ANI state and associated counters
- *
- * @max_spur_level: the maximum spur level is chip dependent
+ * @ani_mode: One of enum ath5k_ani_mode
+ * @noise_imm_level: Noise immunity level
+ * @spur_level: Spur immunity level
+ * @firstep_level: FIRstep level
+ * @ofdm_weak_sig: OFDM weak signal detection state (on/off)
+ * @cck_weak_sig: CCK weak signal detection state (on/off)
+ * @max_spur_level: Max spur immunity level (chip specific)
+ * @listen_time: Listen time
+ * @ofdm_errors: OFDM timing error count
+ * @cck_errors: CCK timing error count
+ * @last_cc: The &struct ath_cycle_counters (for stats)
+ * @last_listen: Listen time from previous run (for stats)
+ * @last_ofdm_errors: OFDM timing error count from previous run (for tats)
+ * @last_cck_errors: CCK timing error count from previous run (for stats)
+ * @sum_ofdm_errors: Sum of OFDM timing errors (for stats)
+ * @sum_cck_errors: Sum of all CCK timing errors (for stats)
*/
struct ath5k_ani_state {
enum ath5k_ani_mode ani_mode;
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index fecbcd9..e564e58 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -187,10 +187,9 @@
#define AR5K_TUNE_MAX_TXPOWER 63
#define AR5K_TUNE_DEFAULT_TXPOWER 25
#define AR5K_TUNE_TPC_TXPOWER false
-#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 10000 /* 10 sec */
+#define ATH5K_TUNE_CALIBRATION_INTERVAL_FULL 60000 /* 60 sec */
+#define ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT 10000 /* 10 sec */
#define ATH5K_TUNE_CALIBRATION_INTERVAL_ANI 1000 /* 1 sec */
-#define ATH5K_TUNE_CALIBRATION_INTERVAL_NF 60000 /* 60 sec */
-
#define ATH5K_TX_COMPLETE_POLL_INT 3000 /* 3 sec */
#define AR5K_INIT_CARR_SENSE_EN 1
@@ -262,16 +261,34 @@
#define AR5K_AGC_SETTLING_TURBO 37
-/* GENERIC CHIPSET DEFINITIONS */
-/* MAC Chips */
+/*****************************\
+* GENERIC CHIPSET DEFINITIONS *
+\*****************************/
+
+/**
+ * enum ath5k_version - MAC Chips
+ * @AR5K_AR5210: AR5210 (Crete)
+ * @AR5K_AR5211: AR5211 (Oahu/Maui)
+ * @AR5K_AR5212: AR5212 (Venice) and newer
+ */
enum ath5k_version {
AR5K_AR5210 = 0,
AR5K_AR5211 = 1,
AR5K_AR5212 = 2,
};
-/* PHY Chips */
+/**
+ * enum ath5k_radio - PHY Chips
+ * @AR5K_RF5110: RF5110 (Fez)
+ * @AR5K_RF5111: RF5111 (Sombrero)
+ * @AR5K_RF5112: RF2112/5112(A) (Derby/Derby2)
+ * @AR5K_RF2413: RF2413/2414 (Griffin/Griffin-Lite)
+ * @AR5K_RF5413: RF5413/5414/5424 (Eagle/Condor)
+ * @AR5K_RF2316: RF2315/2316 (Cobra SoC)
+ * @AR5K_RF2317: RF2317 (Spider SoC)
+ * @AR5K_RF2425: RF2425/2417 (Swan/Nalla)
+ */
enum ath5k_radio {
AR5K_RF5110 = 0,
AR5K_RF5111 = 1,
@@ -303,11 +320,11 @@
#define AR5K_SREV_AR5213A 0x59 /* Hainan */
#define AR5K_SREV_AR2413 0x78 /* Griffin lite */
#define AR5K_SREV_AR2414 0x70 /* Griffin */
-#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */
-#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */
+#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */
+#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */
#define AR5K_SREV_AR5424 0x90 /* Condor */
-#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */
-#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */
+#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */
+#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */
#define AR5K_SREV_AR5413 0xa4 /* Eagle lite */
#define AR5K_SREV_AR5414 0xa0 /* Eagle */
#define AR5K_SREV_AR2415 0xb0 /* Talon */
@@ -344,32 +361,40 @@
/* TODO add support to mac80211 for vendor-specific rates and modes */
-/*
+/**
+ * DOC: Atheros XR
+ *
* Some of this information is based on Documentation from:
*
* http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG
*
- * Modulation for Atheros' eXtended Range - range enhancing extension that is
- * supposed to double the distance an Atheros client device can keep a
- * connection with an Atheros access point. This is achieved by increasing
- * the receiver sensitivity up to, -105dBm, which is about 20dB above what
- * the 802.11 specifications demand. In addition, new (proprietary) data rates
- * are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
+ * Atheros' eXtended Range - range enhancing extension is a modulation scheme
+ * that is supposed to double the link distance between an Atheros XR-enabled
+ * client device with an Atheros XR-enabled access point. This is achieved
+ * by increasing the receiver sensitivity up to, -105dBm, which is about 20dB
+ * above what the 802.11 specifications demand. In addition, new (proprietary)
+ * data rates are introduced: 3, 2, 1, 0.5 and 0.25 MBit/s.
*
* Please note that can you either use XR or TURBO but you cannot use both,
* they are exclusive.
*
+ * Also note that we do not plan to support XR mode at least for now. You can
+ * get a mode similar to XR by using 5MHz bwmode.
*/
-#define MODULATION_XR 0x00000200
-/*
- * Modulation for Atheros' Turbo G and Turbo A, its supposed to provide a
- * throughput transmission speed up to 40Mbit/s-60Mbit/s at a 108Mbit/s
- * signaling rate achieved through the bonding of two 54Mbit/s 802.11g
- * channels. To use this feature your Access Point must also support it.
+
+
+/**
+ * DOC: Atheros SuperAG
+ *
+ * In addition to XR we have another modulation scheme called TURBO mode
+ * that is supposed to provide a throughput transmission speed up to 40Mbit/s
+ * -60Mbit/s at a 108Mbit/s signaling rate achieved through the bonding of two
+ * 54Mbit/s 802.11g channels. To use this feature both ends must support it.
* There is also a distinction between "static" and "dynamic" turbo modes:
*
* - Static: is the dumb version: devices set to this mode stick to it until
* the mode is turned off.
+ *
* - Dynamic: is the intelligent version, the network decides itself if it
* is ok to use turbo. As soon as traffic is detected on adjacent channels
* (which would get used in turbo mode), or when a non-turbo station joins
@@ -383,24 +408,39 @@
*
* http://www.pcworld.com/article/id,113428-page,1/article.html
*
- * The channel bonding seems to be driver specific though. In addition to
- * deciding what channels will be used, these "Turbo" modes are accomplished
- * by also enabling the following features:
+ * The channel bonding seems to be driver specific though.
+ *
+ * In addition to TURBO modes we also have the following features for even
+ * greater speed-up:
*
* - Bursting: allows multiple frames to be sent at once, rather than pausing
* after each frame. Bursting is a standards-compliant feature that can be
* used with any Access Point.
+ *
* - Fast frames: increases the amount of information that can be sent per
* frame, also resulting in a reduction of transmission overhead. It is a
* proprietary feature that needs to be supported by the Access Point.
+ *
* - Compression: data frames are compressed in real time using a Lempel Ziv
* algorithm. This is done transparently. Once this feature is enabled,
* compression and decompression takes place inside the chipset, without
* putting additional load on the host CPU.
*
+ * As with XR we also don't plan to support SuperAG features for now. You can
+ * get a mode similar to TURBO by using 40MHz bwmode.
*/
-#define MODULATION_TURBO 0x00000080
+
+/**
+ * enum ath5k_driver_mode - PHY operation mode
+ * @AR5K_MODE_11A: 802.11a
+ * @AR5K_MODE_11B: 802.11b
+ * @AR5K_MODE_11G: 801.11g
+ * @AR5K_MODE_MAX: Used for boundary checks
+ *
+ * Do not change the order here, we use these as
+ * array indices and it also maps EEPROM structures.
+ */
enum ath5k_driver_mode {
AR5K_MODE_11A = 0,
AR5K_MODE_11B = 1,
@@ -408,30 +448,64 @@
AR5K_MODE_MAX = 3
};
+/**
+ * enum ath5k_ant_mode - Antenna operation mode
+ * @AR5K_ANTMODE_DEFAULT: Default antenna setup
+ * @AR5K_ANTMODE_FIXED_A: Only antenna A is present
+ * @AR5K_ANTMODE_FIXED_B: Only antenna B is present
+ * @AR5K_ANTMODE_SINGLE_AP: STA locked on a single ap
+ * @AR5K_ANTMODE_SECTOR_AP: AP with tx antenna set on tx desc
+ * @AR5K_ANTMODE_SECTOR_STA: STA with tx antenna set on tx desc
+ * @AR5K_ANTMODE_DEBUG: Debug mode -A -> Rx, B-> Tx-
+ * @AR5K_ANTMODE_MAX: Used for boundary checks
+ *
+ * For more infos on antenna control check out phy.c
+ */
enum ath5k_ant_mode {
- AR5K_ANTMODE_DEFAULT = 0, /* default antenna setup */
- AR5K_ANTMODE_FIXED_A = 1, /* only antenna A is present */
- AR5K_ANTMODE_FIXED_B = 2, /* only antenna B is present */
- AR5K_ANTMODE_SINGLE_AP = 3, /* sta locked on a single ap */
- AR5K_ANTMODE_SECTOR_AP = 4, /* AP with tx antenna set on tx desc */
- AR5K_ANTMODE_SECTOR_STA = 5, /* STA with tx antenna set on tx desc */
- AR5K_ANTMODE_DEBUG = 6, /* Debug mode -A -> Rx, B-> Tx- */
+ AR5K_ANTMODE_DEFAULT = 0,
+ AR5K_ANTMODE_FIXED_A = 1,
+ AR5K_ANTMODE_FIXED_B = 2,
+ AR5K_ANTMODE_SINGLE_AP = 3,
+ AR5K_ANTMODE_SECTOR_AP = 4,
+ AR5K_ANTMODE_SECTOR_STA = 5,
+ AR5K_ANTMODE_DEBUG = 6,
AR5K_ANTMODE_MAX,
};
+/**
+ * enum ath5k_bw_mode - Bandwidth operation mode
+ * @AR5K_BWMODE_DEFAULT: 20MHz, default operation
+ * @AR5K_BWMODE_5MHZ: Quarter rate
+ * @AR5K_BWMODE_10MHZ: Half rate
+ * @AR5K_BWMODE_40MHZ: Turbo
+ */
enum ath5k_bw_mode {
- AR5K_BWMODE_DEFAULT = 0, /* 20MHz, default operation */
- AR5K_BWMODE_5MHZ = 1, /* Quarter rate */
- AR5K_BWMODE_10MHZ = 2, /* Half rate */
- AR5K_BWMODE_40MHZ = 3 /* Turbo */
+ AR5K_BWMODE_DEFAULT = 0,
+ AR5K_BWMODE_5MHZ = 1,
+ AR5K_BWMODE_10MHZ = 2,
+ AR5K_BWMODE_40MHZ = 3
};
+
+
/****************\
TX DEFINITIONS
\****************/
-/*
- * TX Status descriptor
+/**
+ * struct ath5k_tx_status - TX Status descriptor
+ * @ts_seqnum: Sequence number
+ * @ts_tstamp: Timestamp
+ * @ts_status: Status code
+ * @ts_final_idx: Final transmission series index
+ * @ts_final_retry: Final retry count
+ * @ts_rssi: RSSI for received ACK
+ * @ts_shortretry: Short retry count
+ * @ts_virtcol: Virtual collision count
+ * @ts_antenna: Antenna used
+ *
+ * TX status descriptor gets filled by the hw
+ * on each transmission attempt.
*/
struct ath5k_tx_status {
u16 ts_seqnum;
@@ -454,7 +528,6 @@
* enum ath5k_tx_queue - Queue types used to classify tx queues.
* @AR5K_TX_QUEUE_INACTIVE: q is unused -- see ath5k_hw_release_tx_queue
* @AR5K_TX_QUEUE_DATA: A normal data queue
- * @AR5K_TX_QUEUE_XR_DATA: An XR-data queue
* @AR5K_TX_QUEUE_BEACON: The beacon queue
* @AR5K_TX_QUEUE_CAB: The after-beacon queue
* @AR5K_TX_QUEUE_UAPSD: Unscheduled Automatic Power Save Delivery queue
@@ -462,7 +535,6 @@
enum ath5k_tx_queue {
AR5K_TX_QUEUE_INACTIVE = 0,
AR5K_TX_QUEUE_DATA,
- AR5K_TX_QUEUE_XR_DATA,
AR5K_TX_QUEUE_BEACON,
AR5K_TX_QUEUE_CAB,
AR5K_TX_QUEUE_UAPSD,
@@ -471,36 +543,46 @@
#define AR5K_NUM_TX_QUEUES 10
#define AR5K_NUM_TX_QUEUES_NOQCU 2
-/*
- * Queue syb-types to classify normal data queues.
+/**
+ * enum ath5k_tx_queue_subtype - Queue sub-types to classify normal data queues
+ * @AR5K_WME_AC_BK: Background traffic
+ * @AR5K_WME_AC_BE: Best-effort (normal) traffic
+ * @AR5K_WME_AC_VI: Video traffic
+ * @AR5K_WME_AC_VO: Voice traffic
+ *
* These are the 4 Access Categories as defined in
* WME spec. 0 is the lowest priority and 4 is the
* highest. Normal data that hasn't been classified
* goes to the Best Effort AC.
*/
enum ath5k_tx_queue_subtype {
- AR5K_WME_AC_BK = 0, /*Background traffic*/
- AR5K_WME_AC_BE, /*Best-effort (normal) traffic*/
- AR5K_WME_AC_VI, /*Video traffic*/
- AR5K_WME_AC_VO, /*Voice traffic*/
+ AR5K_WME_AC_BK = 0,
+ AR5K_WME_AC_BE,
+ AR5K_WME_AC_VI,
+ AR5K_WME_AC_VO,
};
-/*
- * Queue ID numbers as returned by the hw functions, each number
- * represents a hw queue. If hw does not support hw queues
- * (eg 5210) all data goes in one queue. These match
- * d80211 definitions (net80211/MadWiFi don't use them).
+/**
+ * enum ath5k_tx_queue_id - Queue ID numbers as returned by the hw functions
+ * @AR5K_TX_QUEUE_ID_NOQCU_DATA: Data queue on AR5210 (no QCU available)
+ * @AR5K_TX_QUEUE_ID_NOQCU_BEACON: Beacon queue on AR5210 (no QCU available)
+ * @AR5K_TX_QUEUE_ID_DATA_MIN: Data queue min index
+ * @AR5K_TX_QUEUE_ID_DATA_MAX: Data queue max index
+ * @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue
+ * @AR5K_TX_QUEUE_ID_BEACON: Beacon queue
+ * @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery,
+ *
+ * Each number represents a hw queue. If hw does not support hw queues
+ * (eg 5210) all data goes in one queue.
*/
enum ath5k_tx_queue_id {
AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
- AR5K_TX_QUEUE_ID_DATA_MIN = 0, /*IEEE80211_TX_QUEUE_DATA0*/
- AR5K_TX_QUEUE_ID_DATA_MAX = 3, /*IEEE80211_TX_QUEUE_DATA3*/
- AR5K_TX_QUEUE_ID_DATA_SVP = 5, /*IEEE80211_TX_QUEUE_SVP - Spectralink Voice Protocol*/
- AR5K_TX_QUEUE_ID_CAB = 6, /*IEEE80211_TX_QUEUE_AFTER_BEACON*/
- AR5K_TX_QUEUE_ID_BEACON = 7, /*IEEE80211_TX_QUEUE_BEACON*/
- AR5K_TX_QUEUE_ID_UAPSD = 8,
- AR5K_TX_QUEUE_ID_XR_DATA = 9,
+ AR5K_TX_QUEUE_ID_DATA_MIN = 0,
+ AR5K_TX_QUEUE_ID_DATA_MAX = 3,
+ AR5K_TX_QUEUE_ID_UAPSD = 7,
+ AR5K_TX_QUEUE_ID_CAB = 8,
+ AR5K_TX_QUEUE_ID_BEACON = 9,
};
/*
@@ -521,46 +603,70 @@
#define AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS 0x1000 /* Disable backoff while bursting */
#define AR5K_TXQ_FLAG_COMPRESSION_ENABLE 0x2000 /* Enable hw compression -not implemented-*/
-/*
- * Data transmit queue state. One of these exists for each
- * hardware transmit queue. Packets sent to us from above
- * are assigned to queues based on their priority. Not all
- * devices support a complete set of hardware transmit queues.
- * For those devices the array sc_ac2q will map multiple
- * priorities to fewer hardware queues (typically all to one
- * hardware queue).
+/**
+ * struct ath5k_txq - Transmit queue state
+ * @qnum: Hardware q number
+ * @link: Link ptr in last TX desc
+ * @q: Transmit queue (&struct list_head)
+ * @lock: Lock on q and link
+ * @setup: Is the queue configured
+ * @txq_len:Number of queued buffers
+ * @txq_max: Max allowed num of queued buffers
+ * @txq_poll_mark: Used to check if queue got stuck
+ * @txq_stuck: Queue stuck counter
+ *
+ * One of these exists for each hardware transmit queue.
+ * Packets sent to us from above are assigned to queues based
+ * on their priority. Not all devices support a complete set
+ * of hardware transmit queues. For those devices the array
+ * sc_ac2q will map multiple priorities to fewer hardware queues
+ * (typically all to one hardware queue).
*/
struct ath5k_txq {
- unsigned int qnum; /* hardware q number */
- u32 *link; /* link ptr in last TX desc */
- struct list_head q; /* transmit queue */
- spinlock_t lock; /* lock on q and link */
+ unsigned int qnum;
+ u32 *link;
+ struct list_head q;
+ spinlock_t lock;
bool setup;
- int txq_len; /* number of queued buffers */
- int txq_max; /* max allowed num of queued buffers */
+ int txq_len;
+ int txq_max;
bool txq_poll_mark;
- unsigned int txq_stuck; /* informational counter */
+ unsigned int txq_stuck;
};
-/*
- * A struct to hold tx queue's parameters
+/**
+ * struct ath5k_txq_info - A struct to hold TX queue's parameters
+ * @tqi_type: One of enum ath5k_tx_queue
+ * @tqi_subtype: One of enum ath5k_tx_queue_subtype
+ * @tqi_flags: TX queue flags (see above)
+ * @tqi_aifs: Arbitrated Inter-frame Space
+ * @tqi_cw_min: Minimum Contention Window
+ * @tqi_cw_max: Maximum Contention Window
+ * @tqi_cbr_period: Constant bit rate period
+ * @tqi_ready_time: Time queue waits after an event when RDYTIME is enabled
*/
struct ath5k_txq_info {
enum ath5k_tx_queue tqi_type;
enum ath5k_tx_queue_subtype tqi_subtype;
- u16 tqi_flags; /* Tx queue flags (see above) */
- u8 tqi_aifs; /* Arbitrated Interframe Space */
- u16 tqi_cw_min; /* Minimum Contention Window */
- u16 tqi_cw_max; /* Maximum Contention Window */
- u32 tqi_cbr_period; /* Constant bit rate period */
+ u16 tqi_flags;
+ u8 tqi_aifs;
+ u16 tqi_cw_min;
+ u16 tqi_cw_max;
+ u32 tqi_cbr_period;
u32 tqi_cbr_overflow_limit;
u32 tqi_burst_time;
- u32 tqi_ready_time; /* Time queue waits after an event */
+ u32 tqi_ready_time;
};
-/*
- * Transmit packet types.
- * used on tx control descriptor
+/**
+ * enum ath5k_pkt_type - Transmit packet types
+ * @AR5K_PKT_TYPE_NORMAL: Normal data
+ * @AR5K_PKT_TYPE_ATIM: ATIM
+ * @AR5K_PKT_TYPE_PSPOLL: PS-Poll
+ * @AR5K_PKT_TYPE_BEACON: Beacon
+ * @AR5K_PKT_TYPE_PROBE_RESP: Probe response
+ * @AR5K_PKT_TYPE_PIFS: PIFS
+ * Used on tx control descriptor
*/
enum ath5k_pkt_type {
AR5K_PKT_TYPE_NORMAL = 0,
@@ -583,27 +689,23 @@
(ah->ah_txpower.txp_rates_power_table[(_r)] & 0x3f) << (_v) \
)
-/*
- * DMA size definitions (2^(n+2))
- */
-enum ath5k_dmasize {
- AR5K_DMASIZE_4B = 0,
- AR5K_DMASIZE_8B,
- AR5K_DMASIZE_16B,
- AR5K_DMASIZE_32B,
- AR5K_DMASIZE_64B,
- AR5K_DMASIZE_128B,
- AR5K_DMASIZE_256B,
- AR5K_DMASIZE_512B
-};
/****************\
RX DEFINITIONS
\****************/
-/*
- * RX Status descriptor
+/**
+ * struct ath5k_rx_status - RX Status descriptor
+ * @rs_datalen: Data length
+ * @rs_tstamp: Timestamp
+ * @rs_status: Status code
+ * @rs_phyerr: PHY error mask
+ * @rs_rssi: RSSI in 0.5dbm units
+ * @rs_keyix: Index to the key used for decrypting
+ * @rs_rate: Rate used to decode the frame
+ * @rs_antenna: Antenna used to receive the frame
+ * @rs_more: Indicates this is a frame fragment (Fast frames)
*/
struct ath5k_rx_status {
u16 rs_datalen;
@@ -645,10 +747,18 @@
#define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
+
/*******************************\
GAIN OPTIMIZATION DEFINITIONS
\*******************************/
+/**
+ * enum ath5k_rfgain - RF Gain optimization engine state
+ * @AR5K_RFGAIN_INACTIVE: Engine disabled
+ * @AR5K_RFGAIN_ACTIVE: Probe active
+ * @AR5K_RFGAIN_READ_REQUESTED: Probe requested
+ * @AR5K_RFGAIN_NEED_CHANGE: Gain_F needs change
+ */
enum ath5k_rfgain {
AR5K_RFGAIN_INACTIVE = 0,
AR5K_RFGAIN_ACTIVE,
@@ -656,6 +766,16 @@
AR5K_RFGAIN_NEED_CHANGE,
};
+/**
+ * struct ath5k_gain - RF Gain optimization engine state data
+ * @g_step_idx: Current step index
+ * @g_current: Current gain
+ * @g_target: Target gain
+ * @g_low: Low gain boundary
+ * @g_high: High gain boundary
+ * @g_f_corr: Gain_F correction
+ * @g_state: One of enum ath5k_rfgain
+ */
struct ath5k_gain {
u8 g_step_idx;
u8 g_current;
@@ -666,6 +786,8 @@
u8 g_state;
};
+
+
/********************\
COMMON DEFINITIONS
\********************/
@@ -674,9 +796,14 @@
#define AR5K_SLOT_TIME_20 880
#define AR5K_SLOT_TIME_MAX 0xffff
-/*
- * The following structure is used to map 2GHz channels to
- * 5GHz Atheros channels.
+/**
+ * struct ath5k_athchan_2ghz - 2GHz to 5GHZ map for RF5111
+ * @a2_flags: Channel flags (internal)
+ * @a2_athchan: HW channel number (internal)
+ *
+ * This structure is used to map 2GHz channels to
+ * 5GHz Atheros channels on 2111 frequency converter
+ * that comes together with RF5111
* TODO: Clean up
*/
struct ath5k_athchan_2ghz {
@@ -684,36 +811,80 @@
u16 a2_athchan;
};
+/**
+ * enum ath5k_dmasize - DMA size definitions (2^(n+2))
+ * @AR5K_DMASIZE_4B: 4Bytes
+ * @AR5K_DMASIZE_8B: 8Bytes
+ * @AR5K_DMASIZE_16B: 16Bytes
+ * @AR5K_DMASIZE_32B: 32Bytes
+ * @AR5K_DMASIZE_64B: 64Bytes (Default)
+ * @AR5K_DMASIZE_128B: 128Bytes
+ * @AR5K_DMASIZE_256B: 256Bytes
+ * @AR5K_DMASIZE_512B: 512Bytes
+ *
+ * These are used to set DMA burst size on hw
+ *
+ * Note: Some platforms can't handle more than 4Bytes
+ * be careful on embedded boards.
+ */
+enum ath5k_dmasize {
+ AR5K_DMASIZE_4B = 0,
+ AR5K_DMASIZE_8B,
+ AR5K_DMASIZE_16B,
+ AR5K_DMASIZE_32B,
+ AR5K_DMASIZE_64B,
+ AR5K_DMASIZE_128B,
+ AR5K_DMASIZE_256B,
+ AR5K_DMASIZE_512B
+};
+
+
/******************\
RATE DEFINITIONS
\******************/
/**
+ * DOC: Rate codes
+ *
* Seems the ar5xxx hardware supports up to 32 rates, indexed by 1-32.
*
* The rate code is used to get the RX rate or set the TX rate on the
* hardware descriptors. It is also used for internal modulation control
* and settings.
*
- * This is the hardware rate map we are aware of:
+ * This is the hardware rate map we are aware of (html unfriendly):
*
- * rate_code 0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08
- * rate_kbps 3000 1000 ? ? ? 2000 500 48000
+ * Rate code Rate (Kbps)
+ * --------- -----------
+ * 0x01 3000 (XR)
+ * 0x02 1000 (XR)
+ * 0x03 250 (XR)
+ * 0x04 - 05 -Reserved-
+ * 0x06 2000 (XR)
+ * 0x07 500 (XR)
+ * 0x08 48000 (OFDM)
+ * 0x09 24000 (OFDM)
+ * 0x0A 12000 (OFDM)
+ * 0x0B 6000 (OFDM)
+ * 0x0C 54000 (OFDM)
+ * 0x0D 36000 (OFDM)
+ * 0x0E 18000 (OFDM)
+ * 0x0F 9000 (OFDM)
+ * 0x10 - 17 -Reserved-
+ * 0x18 11000L (CCK)
+ * 0x19 5500L (CCK)
+ * 0x1A 2000L (CCK)
+ * 0x1B 1000L (CCK)
+ * 0x1C 11000S (CCK)
+ * 0x1D 5500S (CCK)
+ * 0x1E 2000S (CCK)
+ * 0x1F -Reserved-
*
- * rate_code 0x09 0x0A 0x0B 0x0C 0x0D 0x0E 0x0F 0x10
- * rate_kbps 24000 12000 6000 54000 36000 18000 9000 ?
- *
- * rate_code 17 18 19 20 21 22 23 24
- * rate_kbps ? ? ? ? ? ? ? 11000
- *
- * rate_code 25 26 27 28 29 30 31 32
- * rate_kbps 5500 2000 1000 11000S 5500S 2000S ? ?
- *
- * "S" indicates CCK rates with short preamble.
+ * "S" indicates CCK rates with short preamble and "L" with long preamble.
*
* AR5211 has different rate codes for CCK (802.11B) rates. It only uses the
- * lowest 4 bits, so they are the same as below with a 0xF mask.
+ * lowest 4 bits, so they are the same as above with a 0xF mask.
* (0xB, 0xA, 0x9 and 0x8 for 1M, 2M, 5.5M and 11M).
* We handle this in ath5k_setup_bands().
*/
@@ -733,13 +904,9 @@
#define ATH5K_RATE_CODE_36M 0x0D
#define ATH5K_RATE_CODE_48M 0x08
#define ATH5K_RATE_CODE_54M 0x0C
-/* XR */
-#define ATH5K_RATE_CODE_XR_500K 0x07
-#define ATH5K_RATE_CODE_XR_1M 0x02
-#define ATH5K_RATE_CODE_XR_2M 0x06
-#define ATH5K_RATE_CODE_XR_3M 0x01
-/* adding this flag to rate_code enables short preamble */
+/* Adding this flag to rate_code on B rates
+ * enables short preamble */
#define AR5K_SET_SHORT_PREAMBLE 0x04
/*
@@ -769,49 +936,65 @@
/**
* enum ath5k_int - Hardware interrupt masks helpers
+ * @AR5K_INT_RXOK: Frame successfully received
+ * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor
+ * @AR5K_INT_RXERR: Frame reception failed
+ * @AR5K_INT_RXNOFRM: No frame received within a specified time period
+ * @AR5K_INT_RXEOL: Reached "End Of List", means we need more RX descriptors
+ * @AR5K_INT_RXORN: Indicates we got RX FIFO overrun. Note that Rx overrun is
+ * not always fatal, on some chips we can continue operation
+ * without resetting the card, that's why %AR5K_INT_FATAL is not
+ * common for all chips.
+ * @AR5K_INT_RX_ALL: Mask to identify all RX related interrupts
*
- * @AR5K_INT_RX: mask to identify received frame interrupts, of type
- * AR5K_ISR_RXOK or AR5K_ISR_RXERR
- * @AR5K_INT_RXDESC: Request RX descriptor/Read RX descriptor (?)
- * @AR5K_INT_RXNOFRM: No frame received (?)
- * @AR5K_INT_RXEOL: received End Of List for VEOL (Virtual End Of List). The
- * Queue Control Unit (QCU) signals an EOL interrupt only if a descriptor's
- * LinkPtr is NULL. For more details, refer to:
- * http://www.freepatentsonline.com/20030225739.html
- * @AR5K_INT_RXORN: Indicates we got RX overrun (eg. no more descriptors).
- * Note that Rx overrun is not always fatal, on some chips we can continue
- * operation without resetting the card, that's why int_fatal is not
- * common for all chips.
- * @AR5K_INT_TX: mask to identify received frame interrupts, of type
- * AR5K_ISR_TXOK or AR5K_ISR_TXERR
- * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor (?)
- * @AR5K_INT_TXURN: received when we should increase the TX trigger threshold
- * We currently do increments on interrupt by
- * (AR5K_TUNE_MAX_TX_FIFO_THRES - current_trigger_level) / 2
+ * @AR5K_INT_TXOK: Frame transmission success
+ * @AR5K_INT_TXDESC: Request TX descriptor/Read TX status descriptor
+ * @AR5K_INT_TXERR: Frame transmission failure
+ * @AR5K_INT_TXEOL: Received End Of List for VEOL (Virtual End Of List). The
+ * Queue Control Unit (QCU) signals an EOL interrupt only if a
+ * descriptor's LinkPtr is NULL. For more details, refer to:
+ * "http://www.freepatentsonline.com/20030225739.html"
+ * @AR5K_INT_TXNOFRM: No frame was transmitted within a specified time period
+ * @AR5K_INT_TXURN: Indicates we got TX FIFO underrun. In such case we should
+ * increase the TX trigger threshold.
+ * @AR5K_INT_TX_ALL: Mask to identify all TX related interrupts
+ *
* @AR5K_INT_MIB: Indicates the either Management Information Base counters or
- * one of the PHY error counters reached the maximum value and should be
- * read and cleared.
+ * one of the PHY error counters reached the maximum value and
+ * should be read and cleared.
+ * @AR5K_INT_SWI: Software triggered interrupt.
* @AR5K_INT_RXPHY: RX PHY Error
* @AR5K_INT_RXKCM: RX Key cache miss
* @AR5K_INT_SWBA: SoftWare Beacon Alert - indicates its time to send a
- * beacon that must be handled in software. The alternative is if you
- * have VEOL support, in that case you let the hardware deal with things.
+ * beacon that must be handled in software. The alternative is if
+ * you have VEOL support, in that case you let the hardware deal
+ * with things.
+ * @AR5K_INT_BRSSI: Beacon received with an RSSI value below our threshold
* @AR5K_INT_BMISS: If in STA mode this indicates we have stopped seeing
- * beacons from the AP have associated with, we should probably try to
- * reassociate. When in IBSS mode this might mean we have not received
- * any beacons from any local stations. Note that every station in an
- * IBSS schedules to send beacons at the Target Beacon Transmission Time
- * (TBTT) with a random backoff.
- * @AR5K_INT_BNR: Beacon Not Ready interrupt - ??
- * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill, disabled for now
- * until properly handled
- * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by DMA
- * errors. These types of errors we can enable seem to be of type
- * AR5K_SIMR2_MCABT, AR5K_SIMR2_SSERR and AR5K_SIMR2_DPERR.
+ * beacons from the AP have associated with, we should probably
+ * try to reassociate. When in IBSS mode this might mean we have
+ * not received any beacons from any local stations. Note that
+ * every station in an IBSS schedules to send beacons at the
+ * Target Beacon Transmission Time (TBTT) with a random backoff.
+ * @AR5K_INT_BNR: Beacon queue got triggered (DMA beacon alert) while empty.
+ * @AR5K_INT_TIM: Beacon with local station's TIM bit set
+ * @AR5K_INT_DTIM: Beacon with DTIM bit and zero DTIM count received
+ * @AR5K_INT_DTIM_SYNC: DTIM sync lost
+ * @AR5K_INT_GPIO: GPIO interrupt is used for RF Kill switches connected to
+ * our GPIO pins.
+ * @AR5K_INT_BCN_TIMEOUT: Beacon timeout, we waited after TBTT but got noting
+ * @AR5K_INT_CAB_TIMEOUT: We waited for CAB traffic after the beacon but got
+ * nothing or an incomplete CAB frame sequence.
+ * @AR5K_INT_QCBRORN: A queue got it's CBR counter expired
+ * @AR5K_INT_QCBRURN: A queue got triggered wile empty
+ * @AR5K_INT_QTRIG: A queue got triggered
+ *
+ * @AR5K_INT_FATAL: Fatal errors were encountered, typically caused by bus/DMA
+ * errors. Indicates we need to reset the card.
* @AR5K_INT_GLOBAL: Used to clear and set the IER
- * @AR5K_INT_NOCARD: signals the card has been removed
- * @AR5K_INT_COMMON: common interrupts shared among MACs with the same
- * bit value
+ * @AR5K_INT_NOCARD: Signals the card has been removed
+ * @AR5K_INT_COMMON: Common interrupts shared among MACs with the same
+ * bit value
*
* These are mapped to take advantage of some common bits
* between the MACs, to be able to set intr properties
@@ -847,15 +1030,15 @@
AR5K_INT_GPIO = 0x01000000,
AR5K_INT_BCN_TIMEOUT = 0x02000000, /* Non common */
AR5K_INT_CAB_TIMEOUT = 0x04000000, /* Non common */
- AR5K_INT_RX_DOPPLER = 0x08000000, /* Non common */
- AR5K_INT_QCBRORN = 0x10000000, /* Non common */
- AR5K_INT_QCBRURN = 0x20000000, /* Non common */
- AR5K_INT_QTRIG = 0x40000000, /* Non common */
+ AR5K_INT_QCBRORN = 0x08000000, /* Non common */
+ AR5K_INT_QCBRURN = 0x10000000, /* Non common */
+ AR5K_INT_QTRIG = 0x20000000, /* Non common */
AR5K_INT_GLOBAL = 0x80000000,
AR5K_INT_TX_ALL = AR5K_INT_TXOK
| AR5K_INT_TXDESC
| AR5K_INT_TXERR
+ | AR5K_INT_TXNOFRM
| AR5K_INT_TXEOL
| AR5K_INT_TXURN,
@@ -891,15 +1074,32 @@
AR5K_INT_NOCARD = 0xffffffff
};
-/* mask which calibration is active at the moment */
+/**
+ * enum ath5k_calibration_mask - Mask which calibration is active at the moment
+ * @AR5K_CALIBRATION_FULL: Full calibration (AGC + SHORT)
+ * @AR5K_CALIBRATION_SHORT: Short calibration (NF + I/Q)
+ * @AR5K_CALIBRATION_NF: Noise Floor calibration
+ * @AR5K_CALIBRATION_ANI: Adaptive Noise Immunity
+ */
enum ath5k_calibration_mask {
AR5K_CALIBRATION_FULL = 0x01,
AR5K_CALIBRATION_SHORT = 0x02,
- AR5K_CALIBRATION_ANI = 0x04,
+ AR5K_CALIBRATION_NF = 0x04,
+ AR5K_CALIBRATION_ANI = 0x08,
};
-/*
- * Power management
+/**
+ * enum ath5k_power_mode - Power management modes
+ * @AR5K_PM_UNDEFINED: Undefined
+ * @AR5K_PM_AUTO: Allow card to sleep if possible
+ * @AR5K_PM_AWAKE: Force card to wake up
+ * @AR5K_PM_FULL_SLEEP: Force card to full sleep (DANGEROUS)
+ * @AR5K_PM_NETWORK_SLEEP: Allow to sleep for a specified duration
+ *
+ * Currently only PM_AWAKE is used, FULL_SLEEP and NETWORK_SLEEP/AUTO
+ * are also known to have problems on some cards. This is not a big
+ * problem though because we can have almost the same effect as
+ * FULL_SLEEP by putting card on warm reset (it's almost powered down).
*/
enum ath5k_power_mode {
AR5K_PM_UNDEFINED = 0,
@@ -957,6 +1157,8 @@
} cap_queues;
bool cap_has_phyerr_counters;
+ bool cap_has_mrr_support;
+ bool cap_needs_2GHz_ovr;
};
/* size of noise floor history (keep it a power of two) */
@@ -1072,13 +1274,11 @@
dma_addr_t desc_daddr; /* DMA (physical) address */
size_t desc_len; /* size of TX/RX descriptors */
- DECLARE_BITMAP(status, 6);
+ DECLARE_BITMAP(status, 4);
#define ATH_STAT_INVALID 0 /* disable hardware accesses */
-#define ATH_STAT_MRRETRY 1 /* multi-rate retry support */
-#define ATH_STAT_PROMISC 2
-#define ATH_STAT_LEDSOFT 3 /* enable LED gpio status */
-#define ATH_STAT_STARTED 4 /* opened & irqs enabled */
-#define ATH_STAT_2G_DISABLED 5 /* multiband radio without 2G */
+#define ATH_STAT_PROMISC 1
+#define ATH_STAT_LEDSOFT 2 /* enable LED gpio status */
+#define ATH_STAT_STARTED 3 /* opened & irqs enabled */
unsigned int filter_flags; /* HW flags, AR5K_RX_FILTER_* */
struct ieee80211_channel *curchan; /* current h/w channel */
@@ -1097,6 +1297,7 @@
led_on; /* pin setting for LED on */
struct work_struct reset_work; /* deferred chip reset */
+ struct work_struct calib_work; /* deferred phy calibration */
struct list_head rxbuf; /* receive buffer */
spinlock_t rxbuflock;
@@ -1113,8 +1314,6 @@
struct ath5k_rfkill rf_kill;
- struct tasklet_struct calib; /* calibration tasklet */
-
spinlock_t block; /* protects beacon */
struct tasklet_struct beacontq; /* beacon intr tasklet */
struct list_head bcbuf; /* beacon buffer */
@@ -1144,7 +1343,7 @@
enum ath5k_int ah_imr;
struct ieee80211_channel *ah_current_channel;
- bool ah_calibration;
+ bool ah_iq_cal_needed;
bool ah_single_chip;
enum ath5k_version ah_version;
@@ -1187,7 +1386,13 @@
u32 ah_txq_imr_cbrurn;
u32 ah_txq_imr_qtrig;
u32 ah_txq_imr_nofrm;
- u32 ah_txq_isr;
+
+ u32 ah_txq_isr_txok_all;
+ u32 ah_txq_isr_txurn;
+ u32 ah_txq_isr_qcborn;
+ u32 ah_txq_isr_qcburn;
+ u32 ah_txq_isr_qtrig;
+
u32 *ah_rf_banks;
size_t ah_rf_banks_size;
size_t ah_rf_regs_count;
@@ -1228,8 +1433,8 @@
/* Calibration timestamp */
unsigned long ah_cal_next_full;
+ unsigned long ah_cal_next_short;
unsigned long ah_cal_next_ani;
- unsigned long ah_cal_next_nf;
/* Calibration mask */
u8 ah_cal_mask;
@@ -1338,11 +1543,11 @@
u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
-void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
+void ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon,
+ u32 interval);
bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval);
/* Init function */
-void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
- u8 mode);
+void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode);
/* Queue Control Unit, DFS Control Unit Functions */
int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index 91627dd..d7114c7 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -27,8 +27,7 @@
#include "debug.h"
/**
- * ath5k_hw_post - Power On Self Test helper function
- *
+ * ath5k_hw_post() - Power On Self Test helper function
* @ah: The &struct ath5k_hw
*/
static int ath5k_hw_post(struct ath5k_hw *ah)
@@ -92,8 +91,7 @@
}
/**
- * ath5k_hw_init - Check if hw is supported and init the needed structs
- *
+ * ath5k_hw_init() - Check if hw is supported and init the needed structs
* @ah: The &struct ath5k_hw associated with the device
*
* Check if the device is supported, perform a POST and initialize the needed
@@ -298,7 +296,7 @@
/* Reset SERDES to load new settings */
ath5k_hw_reg_write(ah, 0x00000000, AR5K_PCIE_SERDES_RESET);
- mdelay(1);
+ usleep_range(1000, 1500);
}
/* Get misc capabilities */
@@ -308,11 +306,6 @@
goto err;
}
- if (test_bit(ATH_STAT_2G_DISABLED, ah->status)) {
- __clear_bit(AR5K_MODE_11B, ah->ah_capabilities.cap_mode);
- __clear_bit(AR5K_MODE_11G, ah->ah_capabilities.cap_mode);
- }
-
/* Crypto settings */
common->keymax = (ah->ah_version == AR5K_AR5210 ?
AR5K_KEYTABLE_SIZE_5210 : AR5K_KEYTABLE_SIZE_5211);
@@ -349,8 +342,7 @@
}
/**
- * ath5k_hw_deinit - Free the ath5k_hw struct
- *
+ * ath5k_hw_deinit() - Free the &struct ath5k_hw
* @ah: The &struct ath5k_hw
*/
void ath5k_hw_deinit(struct ath5k_hw *ah)
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index b346d04..178a4dd 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -80,6 +80,11 @@
module_param_named(fastchanswitch, modparam_fastchanswitch, bool, S_IRUGO);
MODULE_PARM_DESC(fastchanswitch, "Enable fast channel switching for AR2413/AR5413 radios.");
+static int ath5k_modparam_no_hw_rfkill_switch;
+module_param_named(no_hw_rfkill_switch, ath5k_modparam_no_hw_rfkill_switch,
+ bool, S_IRUGO);
+MODULE_PARM_DESC(no_hw_rfkill_switch, "Ignore the GPIO RFKill switch state");
+
/* Module info */
MODULE_AUTHOR("Jiri Slaby");
@@ -183,7 +188,6 @@
{ .bitrate = 540,
.hw_value = ATH5K_RATE_CODE_54M,
.flags = 0 },
- /* XR missing */
};
static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
@@ -721,22 +725,25 @@
if (ret)
goto err_unmap;
- memset(mrr_rate, 0, sizeof(mrr_rate));
- memset(mrr_tries, 0, sizeof(mrr_tries));
- for (i = 0; i < 3; i++) {
- rate = ieee80211_get_alt_retry_rate(ah->hw, info, i);
- if (!rate)
- break;
+ /* Set up MRR descriptor */
+ if (ah->ah_capabilities.cap_has_mrr_support) {
+ memset(mrr_rate, 0, sizeof(mrr_rate));
+ memset(mrr_tries, 0, sizeof(mrr_tries));
+ for (i = 0; i < 3; i++) {
+ rate = ieee80211_get_alt_retry_rate(ah->hw, info, i);
+ if (!rate)
+ break;
- mrr_rate[i] = rate->hw_value;
- mrr_tries[i] = info->control.rates[i + 1].count;
+ mrr_rate[i] = rate->hw_value;
+ mrr_tries[i] = info->control.rates[i + 1].count;
+ }
+
+ ath5k_hw_setup_mrr_tx_desc(ah, ds,
+ mrr_rate[0], mrr_tries[0],
+ mrr_rate[1], mrr_tries[1],
+ mrr_rate[2], mrr_tries[2]);
}
- ath5k_hw_setup_mrr_tx_desc(ah, ds,
- mrr_rate[0], mrr_tries[0],
- mrr_rate[1], mrr_tries[1],
- mrr_rate[2], mrr_tries[2]);
-
ds->ds_link = 0;
ds->ds_data = bf->skbaddr;
@@ -1689,7 +1696,7 @@
struct ath5k_hw *ah = (void *)data;
for (i = 0; i < AR5K_NUM_TX_QUEUES; i++)
- if (ah->txqs[i].setup && (ah->ah_txq_isr & BIT(i)))
+ if (ah->txqs[i].setup && (ah->ah_txq_isr_txok_all & BIT(i)))
ath5k_tx_processq(ah, &ah->txqs[i]);
ah->tx_pending = false;
@@ -2005,7 +2012,7 @@
ah->nexttbtt = nexttbtt;
intval |= AR5K_BEACON_ENA;
- ath5k_hw_init_beacon(ah, nexttbtt, intval);
+ ath5k_hw_init_beacon_timers(ah, nexttbtt, intval);
/*
* debugging output last in order to preserve the time critical aspect
@@ -2112,16 +2119,29 @@
ath5k_intr_calibration_poll(struct ath5k_hw *ah)
{
if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) &&
- !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) {
- /* run ANI only when full calibration is not active */
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) {
+
+ /* Run ANI only when calibration is not active */
+
ah->ah_cal_next_ani = jiffies +
msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
tasklet_schedule(&ah->ani_tasklet);
- } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
- ah->ah_cal_next_full = jiffies +
- msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
- tasklet_schedule(&ah->calib);
+ } else if (time_is_before_eq_jiffies(ah->ah_cal_next_short) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL) &&
+ !(ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)) {
+
+ /* Run calibration only when another calibration
+ * is not running.
+ *
+ * Note: This is for both full/short calibration,
+ * if it's time for a full one, ath5k_calibrate_work will deal
+ * with it. */
+
+ ah->ah_cal_next_short = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT);
+ ieee80211_queue_work(ah->hw, &ah->calib_work);
}
/* we could use SWI to generate enough interrupts to meet our
* calibration interval requirements, if necessary:
@@ -2149,69 +2169,110 @@
enum ath5k_int status;
unsigned int counter = 1000;
+
+ /*
+ * If hw is not ready (or detached) and we get an
+ * interrupt, or if we have no interrupts pending
+ * (that means it's not for us) skip it.
+ *
+ * NOTE: Group 0/1 PCI interface registers are not
+ * supported on WiSOCs, so we can't check for pending
+ * interrupts (ISR belongs to another register group
+ * so we are ok).
+ */
if (unlikely(test_bit(ATH_STAT_INVALID, ah->status) ||
- ((ath5k_get_bus_type(ah) != ATH_AHB) &&
- !ath5k_hw_is_intr_pending(ah))))
+ ((ath5k_get_bus_type(ah) != ATH_AHB) &&
+ !ath5k_hw_is_intr_pending(ah))))
return IRQ_NONE;
+ /** Main loop **/
do {
- ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+ ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
+
ATH5K_DBG(ah, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
status, ah->imask);
+
+ /*
+ * Fatal hw error -> Log and reset
+ *
+ * Fatal errors are unrecoverable so we have to
+ * reset the card. These errors include bus and
+ * dma errors.
+ */
if (unlikely(status & AR5K_INT_FATAL)) {
- /*
- * Fatal errors are unrecoverable.
- * Typically these are caused by DMA errors.
- */
+
ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
"fatal int, resetting\n");
ieee80211_queue_work(ah->hw, &ah->reset_work);
+
+ /*
+ * RX Overrun -> Count and reset if needed
+ *
+ * Receive buffers are full. Either the bus is busy or
+ * the CPU is not fast enough to process all received
+ * frames.
+ */
} else if (unlikely(status & AR5K_INT_RXORN)) {
+
/*
- * Receive buffers are full. Either the bus is busy or
- * the CPU is not fast enough to process all received
- * frames.
* Older chipsets need a reset to come out of this
* condition, but we treat it as RX for newer chips.
- * We don't know exactly which versions need a reset -
+ * We don't know exactly which versions need a reset
* this guess is copied from the HAL.
*/
ah->stats.rxorn_intr++;
+
if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
"rx overrun, resetting\n");
ieee80211_queue_work(ah->hw, &ah->reset_work);
} else
ath5k_schedule_rx(ah);
+
} else {
+
+ /* Software Beacon Alert -> Schedule beacon tasklet */
if (status & AR5K_INT_SWBA)
tasklet_hi_schedule(&ah->beacontq);
- if (status & AR5K_INT_RXEOL) {
- /*
- * NB: the hardware should re-read the link when
- * RXE bit is written, but it doesn't work at
- * least on older hardware revs.
- */
+ /*
+ * No more RX descriptors -> Just count
+ *
+ * NB: the hardware should re-read the link when
+ * RXE bit is written, but it doesn't work at
+ * least on older hardware revs.
+ */
+ if (status & AR5K_INT_RXEOL)
ah->stats.rxeol_intr++;
- }
- if (status & AR5K_INT_TXURN) {
- /* bump tx trigger level */
+
+
+ /* TX Underrun -> Bump tx trigger level */
+ if (status & AR5K_INT_TXURN)
ath5k_hw_update_tx_triglevel(ah, true);
- }
+
+ /* RX -> Schedule rx tasklet */
if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
ath5k_schedule_rx(ah);
- if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
- | AR5K_INT_TXERR | AR5K_INT_TXEOL))
+
+ /* TX -> Schedule tx tasklet */
+ if (status & (AR5K_INT_TXOK
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXERR
+ | AR5K_INT_TXEOL))
ath5k_schedule_tx(ah);
- if (status & AR5K_INT_BMISS) {
- /* TODO */
- }
+
+ /* Missed beacon -> TODO
+ if (status & AR5K_INT_BMISS)
+ */
+
+ /* MIB event -> Update counters and notify ANI */
if (status & AR5K_INT_MIB) {
ah->stats.mib_intr++;
ath5k_hw_update_mib_counters(ah);
ath5k_ani_mib_intr(ah);
}
+
+ /* GPIO -> Notify RFKill layer */
if (status & AR5K_INT_GPIO)
tasklet_schedule(&ah->rf_kill.toggleq);
@@ -2222,12 +2283,19 @@
} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
+ /*
+ * Until we handle rx/tx interrupts mask them on IMR
+ *
+ * NOTE: ah->(rx/tx)_pending are set when scheduling the tasklets
+ * and unset after we 've handled the interrupts.
+ */
if (ah->rx_pending || ah->tx_pending)
ath5k_set_current_imask(ah);
if (unlikely(!counter))
ATH5K_WARN(ah, "too many interrupts, giving up for now\n");
+ /* Fire up calibration poll */
ath5k_intr_calibration_poll(ah);
return IRQ_HANDLED;
@@ -2238,41 +2306,58 @@
* for temperature/environment changes.
*/
static void
-ath5k_tasklet_calibrate(unsigned long data)
+ath5k_calibrate_work(struct work_struct *work)
{
- struct ath5k_hw *ah = (void *)data;
+ struct ath5k_hw *ah = container_of(work, struct ath5k_hw,
+ calib_work);
- /* Only full calibration for now */
- ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
+ /* Should we run a full calibration ? */
+ if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
+
+ ah->ah_cal_next_full = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
+ ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
+
+ ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
+ "running full calibration\n");
+
+ if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
+ /*
+ * Rfgain is out of bounds, reset the chip
+ * to load new gain values.
+ */
+ ATH5K_DBG(ah, ATH5K_DEBUG_RESET,
+ "got new rfgain, resetting\n");
+ ieee80211_queue_work(ah->hw, &ah->reset_work);
+ }
+
+ /* TODO: On full calibration we should stop TX here,
+ * so that it doesn't interfere (mostly due to gain_f
+ * calibration that messes with tx packets -see phy.c).
+ *
+ * NOTE: Stopping the queues from above is not enough
+ * to stop TX but saves us from disconecting (at least
+ * we don't lose packets). */
+ ieee80211_stop_queues(ah->hw);
+ } else
+ ah->ah_cal_mask |= AR5K_CALIBRATION_SHORT;
+
ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
ieee80211_frequency_to_channel(ah->curchan->center_freq),
ah->curchan->hw_value);
- if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
- /*
- * Rfgain is out of bounds, reset the chip
- * to load new gain values.
- */
- ATH5K_DBG(ah, ATH5K_DEBUG_RESET, "calibration, resetting\n");
- ieee80211_queue_work(ah->hw, &ah->reset_work);
- }
if (ath5k_hw_phy_calibrate(ah, ah->curchan))
ATH5K_ERR(ah, "calibration of channel %u failed\n",
ieee80211_frequency_to_channel(
ah->curchan->center_freq));
- /* Noise floor calibration interrupts rx/tx path while I/Q calibration
- * doesn't.
- * TODO: We should stop TX here, so that it doesn't interfere.
- * Note that stopping the queues is not enough to stop TX! */
- if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) {
- ah->ah_cal_next_nf = jiffies +
- msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF);
- ath5k_hw_update_noise_floor(ah);
- }
-
- ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
+ /* Clear calibration flags */
+ if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL) {
+ ieee80211_wake_queues(ah->hw);
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
+ } else if (ah->ah_cal_mask & AR5K_CALIBRATION_SHORT)
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_SHORT;
}
@@ -2407,8 +2492,8 @@
if (ret)
goto err_irq;
- /* set up multi-rate retry capabilities */
- if (ah->ah_version == AR5K_AR5212) {
+ /* Set up multi-rate retry capabilities */
+ if (ah->ah_capabilities.cap_has_mrr_support) {
hw->max_rates = 4;
hw->max_rate_tries = max(AR5K_INIT_RETRY_SHORT,
AR5K_INIT_RETRY_LONG);
@@ -2544,15 +2629,22 @@
* and then setup of the interrupt mask.
*/
ah->curchan = ah->hw->conf.channel;
- ah->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
- AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
- AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
+ ah->imask = AR5K_INT_RXOK
+ | AR5K_INT_RXERR
+ | AR5K_INT_RXEOL
+ | AR5K_INT_RXORN
+ | AR5K_INT_TXDESC
+ | AR5K_INT_TXEOL
+ | AR5K_INT_FATAL
+ | AR5K_INT_GLOBAL
+ | AR5K_INT_MIB;
ret = ath5k_reset(ah, NULL, false);
if (ret)
goto done;
- ath5k_rfkill_hw_start(ah);
+ if (!ath5k_modparam_no_hw_rfkill_switch)
+ ath5k_rfkill_hw_start(ah);
/*
* Reset the key cache since some parts do not reset the
@@ -2585,7 +2677,6 @@
ah->tx_pending = false;
tasklet_kill(&ah->rxtq);
tasklet_kill(&ah->txtq);
- tasklet_kill(&ah->calib);
tasklet_kill(&ah->beacontq);
tasklet_kill(&ah->ani_tasklet);
}
@@ -2637,7 +2728,8 @@
cancel_delayed_work_sync(&ah->tx_complete_work);
- ath5k_rfkill_hw_stop(ah);
+ if (!ath5k_modparam_no_hw_rfkill_switch)
+ ath5k_rfkill_hw_stop(ah);
}
/*
@@ -2689,9 +2781,24 @@
ath5k_ani_init(ah, ani_mode);
- ah->ah_cal_next_full = jiffies + msecs_to_jiffies(100);
- ah->ah_cal_next_ani = jiffies;
- ah->ah_cal_next_nf = jiffies;
+ /*
+ * Set calibration intervals
+ *
+ * Note: We don't need to run calibration imediately
+ * since some initial calibration is done on reset
+ * even for fast channel switching. Also on scanning
+ * this will get set again and again and it won't get
+ * executed unless we connect somewhere and spend some
+ * time on the channel (that's what calibration needs
+ * anyway to be accurate).
+ */
+ ah->ah_cal_next_full = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
+ ah->ah_cal_next_ani = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
+ ah->ah_cal_next_short = jiffies +
+ msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_SHORT);
+
ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8);
/* clear survey data and cycle counters */
@@ -2745,20 +2852,6 @@
/*
- * Check if the MAC has multi-rate retry support.
- * We do this by trying to setup a fake extended
- * descriptor. MACs that don't have support will
- * return false w/o doing anything. MACs that do
- * support it will return true w/o doing anything.
- */
- ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
-
- if (ret < 0)
- goto err;
- if (ret > 0)
- __set_bit(ATH_STAT_MRRETRY, ah->status);
-
- /*
* Collect the channel list. The 802.11 layer
* is responsible for filtering this list based
* on settings like the phy mode and regulatory
@@ -2841,11 +2934,11 @@
tasklet_init(&ah->rxtq, ath5k_tasklet_rx, (unsigned long)ah);
tasklet_init(&ah->txtq, ath5k_tasklet_tx, (unsigned long)ah);
- tasklet_init(&ah->calib, ath5k_tasklet_calibrate, (unsigned long)ah);
tasklet_init(&ah->beacontq, ath5k_tasklet_beacon, (unsigned long)ah);
tasklet_init(&ah->ani_tasklet, ath5k_tasklet_ani, (unsigned long)ah);
INIT_WORK(&ah->reset_work, ath5k_reset_work);
+ INIT_WORK(&ah->calib_work, ath5k_calibrate_work);
INIT_DELAYED_WORK(&ah->tx_complete_work, ath5k_tx_complete_poll_work);
ret = ath5k_hw_common(ah)->bus_ops->eeprom_read_mac(ah, mac);
diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
index 810fba9..994169a 100644
--- a/drivers/net/wireless/ath/ath5k/caps.c
+++ b/drivers/net/wireless/ath/ath5k/caps.c
@@ -85,12 +85,19 @@
caps->cap_range.range_2ghz_min = 2412;
caps->cap_range.range_2ghz_max = 2732;
- if (AR5K_EEPROM_HDR_11B(ee_header))
- __set_bit(AR5K_MODE_11B, caps->cap_mode);
+ /* Override 2GHz modes on SoCs that need it
+ * NOTE: cap_needs_2GHz_ovr gets set from
+ * ath_ahb_probe */
+ if (!caps->cap_needs_2GHz_ovr) {
+ if (AR5K_EEPROM_HDR_11B(ee_header))
+ __set_bit(AR5K_MODE_11B,
+ caps->cap_mode);
- if (AR5K_EEPROM_HDR_11G(ee_header) &&
- ah->ah_version != AR5K_AR5211)
- __set_bit(AR5K_MODE_11G, caps->cap_mode);
+ if (AR5K_EEPROM_HDR_11G(ee_header) &&
+ ah->ah_version != AR5K_AR5211)
+ __set_bit(AR5K_MODE_11G,
+ caps->cap_mode);
+ }
}
}
@@ -103,12 +110,18 @@
else
caps->cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
- /* newer hardware has PHY error counters */
+ /* Newer hardware has PHY error counters */
if (ah->ah_mac_srev >= AR5K_SREV_AR5213A)
caps->cap_has_phyerr_counters = true;
else
caps->cap_has_phyerr_counters = false;
+ /* MACs since AR5212 have MRR support */
+ if (ah->ah_version == AR5K_AR5212)
+ caps->cap_has_mrr_support = true;
+ else
+ caps->cap_has_mrr_support = false;
+
return 0;
}
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index fce8c90..8c5ce8b 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -57,8 +57,9 @@
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
+#include <linux/export.h>
+#include <linux/moduleparam.h>
-#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/list.h>
#include "debug.h"
diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
index 7f37df3..0a3f916 100644
--- a/drivers/net/wireless/ath/ath5k/debug.h
+++ b/drivers/net/wireless/ath/ath5k/debug.h
@@ -141,10 +141,10 @@
#include <linux/compiler.h>
-static inline void __attribute__ ((format (printf, 3, 4)))
+static inline __printf(3, 4) void
ATH5K_DBG(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...) {}
-static inline void __attribute__ ((format (printf, 3, 4)))
+static inline __printf(3, 4) void
ATH5K_DBG_UNLIMIT(struct ath5k_hw *ah, unsigned int m, const char *fmt, ...)
{}
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index 7e88dda..f8bfa3a 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -26,20 +26,61 @@
#include "debug.h"
+/**
+ * DOC: Hardware descriptor functions
+ *
+ * Here we handle the processing of the low-level hw descriptors
+ * that hw reads and writes via DMA for each TX and RX attempt (that means
+ * we can also have descriptors for failed TX/RX tries). We have two kind of
+ * descriptors for RX and TX, control descriptors tell the hw how to send or
+ * receive a packet where to read/write it from/to etc and status descriptors
+ * that contain information about how the packet was sent or received (errors
+ * included).
+ *
+ * Descriptor format is not exactly the same for each MAC chip version so we
+ * have function pointers on &struct ath5k_hw we initialize at runtime based on
+ * the chip used.
+ */
+
+
/************************\
* TX Control descriptors *
\************************/
-/*
- * Initialize the 2-word tx control descriptor on 5210/5211
+/**
+ * ath5k_hw_setup_2word_tx_desc() - Initialize a 2-word tx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @pkt_len: Frame length in bytes
+ * @hdr_len: Header length in bytes (only used on AR5210)
+ * @padsize: Any padding we've added to the frame length
+ * @type: One of enum ath5k_pkt_type
+ * @tx_power: Tx power in 0.5dB steps
+ * @tx_rate0: HW idx for transmission rate
+ * @tx_tries0: Max number of retransmissions
+ * @key_index: Index on key table to use for encryption
+ * @antenna_mode: Which antenna to use (0 for auto)
+ * @flags: One of AR5K_TXDESC_* flags (desc.h)
+ * @rtscts_rate: HW idx for RTS/CTS transmission rate
+ * @rtscts_duration: What to put on duration field on the header of RTS/CTS
+ *
+ * Internal function to initialize a 2-Word TX control descriptor
+ * found on AR5210 and AR5211 MACs chips.
+ *
+ * Returns 0 on success or -EINVAL on false input
*/
static int
-ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
- unsigned int pkt_len, unsigned int hdr_len, int padsize,
- enum ath5k_pkt_type type,
- unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
- unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
- unsigned int rtscts_rate, unsigned int rtscts_duration)
+ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ unsigned int pkt_len, unsigned int hdr_len,
+ int padsize,
+ enum ath5k_pkt_type type,
+ unsigned int tx_power,
+ unsigned int tx_rate0, unsigned int tx_tries0,
+ unsigned int key_index,
+ unsigned int antenna_mode,
+ unsigned int flags,
+ unsigned int rtscts_rate, unsigned int rtscts_duration)
{
u32 frame_type;
struct ath5k_hw_2w_tx_ctl *tx_ctl;
@@ -172,17 +213,40 @@
return 0;
}
-/*
- * Initialize the 4-word tx control descriptor on 5212
+/**
+ * ath5k_hw_setup_4word_tx_desc() - Initialize a 4-word tx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @pkt_len: Frame length in bytes
+ * @hdr_len: Header length in bytes (only used on AR5210)
+ * @padsize: Any padding we've added to the frame length
+ * @type: One of enum ath5k_pkt_type
+ * @tx_power: Tx power in 0.5dB steps
+ * @tx_rate0: HW idx for transmission rate
+ * @tx_tries0: Max number of retransmissions
+ * @key_index: Index on key table to use for encryption
+ * @antenna_mode: Which antenna to use (0 for auto)
+ * @flags: One of AR5K_TXDESC_* flags (desc.h)
+ * @rtscts_rate: HW idx for RTS/CTS transmission rate
+ * @rtscts_duration: What to put on duration field on the header of RTS/CTS
+ *
+ * Internal function to initialize a 4-Word TX control descriptor
+ * found on AR5212 and later MACs chips.
+ *
+ * Returns 0 on success or -EINVAL on false input
*/
-static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
- struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
- int padsize,
- enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
- unsigned int tx_tries0, unsigned int key_index,
- unsigned int antenna_mode, unsigned int flags,
- unsigned int rtscts_rate,
- unsigned int rtscts_duration)
+static int
+ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ unsigned int pkt_len, unsigned int hdr_len,
+ int padsize,
+ enum ath5k_pkt_type type,
+ unsigned int tx_power,
+ unsigned int tx_rate0, unsigned int tx_tries0,
+ unsigned int key_index,
+ unsigned int antenna_mode,
+ unsigned int flags,
+ unsigned int rtscts_rate, unsigned int rtscts_duration)
{
struct ath5k_hw_4w_tx_ctl *tx_ctl;
unsigned int frame_len;
@@ -292,13 +356,29 @@
return 0;
}
-/*
- * Initialize a 4-word multi rate retry tx control descriptor on 5212
+/**
+ * ath5k_hw_setup_mrr_tx_desc() - Initialize an MRR tx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @tx_rate1: HW idx for rate used on transmission series 1
+ * @tx_tries1: Max number of retransmissions for transmission series 1
+ * @tx_rate2: HW idx for rate used on transmission series 2
+ * @tx_tries2: Max number of retransmissions for transmission series 2
+ * @tx_rate3: HW idx for rate used on transmission series 3
+ * @tx_tries3: Max number of retransmissions for transmission series 3
+ *
+ * Multi rate retry (MRR) tx control descriptors are available only on AR5212
+ * MACs, they are part of the normal 4-word tx control descriptor (see above)
+ * but we handle them through a separate function for better abstraction.
+ *
+ * Returns 0 on success or -EINVAL on invalid input
*/
int
-ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
- unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
- u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ u_int tx_rate1, u_int tx_tries1,
+ u_int tx_rate2, u_int tx_tries2,
+ u_int tx_rate3, u_int tx_tries3)
{
struct ath5k_hw_4w_tx_ctl *tx_ctl;
@@ -350,11 +430,16 @@
* TX Status descriptors *
\***********************/
-/*
- * Process the tx status descriptor on 5210/5211
+/**
+ * ath5k_hw_proc_2word_tx_status() - Process a tx status descriptor on 5210/1
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @ts: The &struct ath5k_tx_status
*/
-static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+static int
+ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_tx_status *ts)
{
struct ath5k_hw_2w_tx_ctl *tx_ctl;
struct ath5k_hw_tx_status *tx_status;
@@ -399,11 +484,16 @@
return 0;
}
-/*
- * Process a tx status descriptor on 5212
+/**
+ * ath5k_hw_proc_4word_tx_status() - Process a tx status descriptor on 5212
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @ts: The &struct ath5k_tx_status
*/
-static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+static int
+ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_tx_status *ts)
{
struct ath5k_hw_4w_tx_ctl *tx_ctl;
struct ath5k_hw_tx_status *tx_status;
@@ -460,11 +550,17 @@
* RX Descriptors *
\****************/
-/*
- * Initialize an rx control descriptor
+/**
+ * ath5k_hw_setup_rx_desc() - Initialize an rx control descriptor
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @size: RX buffer length in bytes
+ * @flags: One of AR5K_RXDESC_* flags
*/
-int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
- u32 size, unsigned int flags)
+int
+ath5k_hw_setup_rx_desc(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ u32 size, unsigned int flags)
{
struct ath5k_hw_rx_ctl *rx_ctl;
@@ -491,11 +587,22 @@
return 0;
}
-/*
- * Process the rx status descriptor on 5210/5211
+/**
+ * ath5k_hw_proc_5210_rx_status() - Process the rx status descriptor on 5210/1
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @rs: The &struct ath5k_rx_status
+ *
+ * Internal function used to process an RX status descriptor
+ * on AR5210/5211 MAC.
+ *
+ * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e
+ * frame yet.
*/
-static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+static int
+ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_rx_status *rs)
{
struct ath5k_hw_rx_status *rx_status;
@@ -574,12 +681,22 @@
return 0;
}
-/*
- * Process the rx status descriptor on 5212
+/**
+ * ath5k_hw_proc_5212_rx_status() - Process the rx status descriptor on 5212
+ * @ah: The &struct ath5k_hw
+ * @desc: The &struct ath5k_desc
+ * @rs: The &struct ath5k_rx_status
+ *
+ * Internal function used to process an RX status descriptor
+ * on AR5212 and later MAC.
+ *
+ * Returns 0 on success or -EINPROGRESS in case we haven't received the who;e
+ * frame yet.
*/
-static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
- struct ath5k_desc *desc,
- struct ath5k_rx_status *rs)
+static int
+ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
+ struct ath5k_desc *desc,
+ struct ath5k_rx_status *rs)
{
struct ath5k_hw_rx_status *rx_status;
u32 rxstat0, rxstat1;
@@ -646,10 +763,16 @@
* Attach *
\********/
-/*
- * Init function pointers inside ath5k_hw struct
+/**
+ * ath5k_hw_init_desc_functions() - Init function pointers inside ah
+ * @ah: The &struct ath5k_hw
+ *
+ * Maps the internal descriptor functions to the function pointers on ah, used
+ * from above. This is used as an abstraction layer to handle the various chips
+ * the same way.
*/
-int ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
+int
+ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
{
if (ah->ah_version == AR5K_AR5212) {
ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h
index cfd529b5..8d6c01a 100644
--- a/drivers/net/wireless/ath/ath5k/desc.h
+++ b/drivers/net/wireless/ath/ath5k/desc.h
@@ -20,25 +20,30 @@
* RX/TX descriptor structures
*/
-/*
- * Common hardware RX control descriptor
+/**
+ * struct ath5k_hw_rx_ctl - Common hardware RX control descriptor
+ * @rx_control_0: RX control word 0
+ * @rx_control_1: RX control word 1
*/
struct ath5k_hw_rx_ctl {
- u32 rx_control_0; /* RX control word 0 */
- u32 rx_control_1; /* RX control word 1 */
+ u32 rx_control_0;
+ u32 rx_control_1;
} __packed __aligned(4);
/* RX control word 1 fields/flags */
#define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff /* data buffer length */
#define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 /* RX interrupt request */
-/*
- * Common hardware RX status descriptor
+/**
+ * struct ath5k_hw_rx_status - Common hardware RX status descriptor
+ * @rx_status_0: RX status word 0
+ * @rx_status_1: RX status word 1
+ *
* 5210, 5211 and 5212 differ only in the fields and flags defined below
*/
struct ath5k_hw_rx_status {
- u32 rx_status_0; /* RX status word 0 */
- u32 rx_status_1; /* RX status word 1 */
+ u32 rx_status_0;
+ u32 rx_status_1;
} __packed __aligned(4);
/* 5210/5211 */
@@ -98,17 +103,36 @@
/**
* enum ath5k_phy_error_code - PHY Error codes
+ * @AR5K_RX_PHY_ERROR_UNDERRUN: Transmit underrun, [5210] No error
+ * @AR5K_RX_PHY_ERROR_TIMING: Timing error
+ * @AR5K_RX_PHY_ERROR_PARITY: Illegal parity
+ * @AR5K_RX_PHY_ERROR_RATE: Illegal rate
+ * @AR5K_RX_PHY_ERROR_LENGTH: Illegal length
+ * @AR5K_RX_PHY_ERROR_RADAR: Radar detect, [5210] 64 QAM rate
+ * @AR5K_RX_PHY_ERROR_SERVICE: Illegal service
+ * @AR5K_RX_PHY_ERROR_TOR: Transmit override receive
+ * @AR5K_RX_PHY_ERROR_OFDM_TIMING: OFDM Timing error [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY: OFDM Signal parity error [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL: OFDM Illegal rate [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_LENGTH_ILLEGAL: OFDM Illegal length [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_POWER_DROP: OFDM Power drop [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_SERVICE: OFDM Service (?) [5212+]
+ * @AR5K_RX_PHY_ERROR_OFDM_RESTART: OFDM Restart (?) [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_TIMING: CCK Timing error [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_HEADER_CRC: Header CRC error [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_RATE_ILLEGAL: Illegal rate [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_SERVICE: CCK Service (?) [5212+]
+ * @AR5K_RX_PHY_ERROR_CCK_RESTART: CCK Restart (?) [5212+]
*/
enum ath5k_phy_error_code {
- AR5K_RX_PHY_ERROR_UNDERRUN = 0, /* Transmit underrun, [5210] No error */
- AR5K_RX_PHY_ERROR_TIMING = 1, /* Timing error */
- AR5K_RX_PHY_ERROR_PARITY = 2, /* Illegal parity */
- AR5K_RX_PHY_ERROR_RATE = 3, /* Illegal rate */
- AR5K_RX_PHY_ERROR_LENGTH = 4, /* Illegal length */
- AR5K_RX_PHY_ERROR_RADAR = 5, /* Radar detect, [5210] 64 QAM rate */
- AR5K_RX_PHY_ERROR_SERVICE = 6, /* Illegal service */
- AR5K_RX_PHY_ERROR_TOR = 7, /* Transmit override receive */
- /* these are specific to the 5212 */
+ AR5K_RX_PHY_ERROR_UNDERRUN = 0,
+ AR5K_RX_PHY_ERROR_TIMING = 1,
+ AR5K_RX_PHY_ERROR_PARITY = 2,
+ AR5K_RX_PHY_ERROR_RATE = 3,
+ AR5K_RX_PHY_ERROR_LENGTH = 4,
+ AR5K_RX_PHY_ERROR_RADAR = 5,
+ AR5K_RX_PHY_ERROR_SERVICE = 6,
+ AR5K_RX_PHY_ERROR_TOR = 7,
AR5K_RX_PHY_ERROR_OFDM_TIMING = 17,
AR5K_RX_PHY_ERROR_OFDM_SIGNAL_PARITY = 18,
AR5K_RX_PHY_ERROR_OFDM_RATE_ILLEGAL = 19,
@@ -123,12 +147,14 @@
AR5K_RX_PHY_ERROR_CCK_RESTART = 31,
};
-/*
- * 5210/5211 hardware 2-word TX control descriptor
+/**
+ * struct ath5k_hw_2w_tx_ctl - 5210/5211 hardware 2-word TX control descriptor
+ * @tx_control_0: TX control word 0
+ * @tx_control_1: TX control word 1
*/
struct ath5k_hw_2w_tx_ctl {
- u32 tx_control_0; /* TX control word 0 */
- u32 tx_control_1; /* TX control word 1 */
+ u32 tx_control_0;
+ u32 tx_control_1;
} __packed __aligned(4);
/* TX control word 0 fields/flags */
@@ -177,14 +203,18 @@
#define AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS 4
#define AR5K_AR5211_TX_DESC_FRAME_TYPE_PRESP 4
-/*
- * 5212 hardware 4-word TX control descriptor
+/**
+ * struct ath5k_hw_4w_tx_ctl - 5212 hardware 4-word TX control descriptor
+ * @tx_control_0: TX control word 0
+ * @tx_control_1: TX control word 1
+ * @tx_control_2: TX control word 2
+ * @tx_control_3: TX control word 3
*/
struct ath5k_hw_4w_tx_ctl {
- u32 tx_control_0; /* TX control word 0 */
- u32 tx_control_1; /* TX control word 1 */
- u32 tx_control_2; /* TX control word 2 */
- u32 tx_control_3; /* TX control word 3 */
+ u32 tx_control_0;
+ u32 tx_control_1;
+ u32 tx_control_2;
+ u32 tx_control_3;
} __packed __aligned(4);
/* TX control word 0 fields/flags */
@@ -238,12 +268,14 @@
#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE 0x01f00000 /* RTS or CTS rate */
#define AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE_S 20
-/*
- * Common TX status descriptor
+/**
+ * struct ath5k_hw_tx_status - Common TX status descriptor
+ * @tx_status_0: TX status word 0
+ * @tx_status_1: TX status word 1
*/
struct ath5k_hw_tx_status {
- u32 tx_status_0; /* TX status word 0 */
- u32 tx_status_1; /* TX status word 1 */
+ u32 tx_status_0;
+ u32 tx_status_1;
} __packed __aligned(4);
/* TX status word 0 fields/flags */
@@ -276,37 +308,47 @@
#define AR5K_DESC_TX_STATUS1_COMP_SUCCESS_5212 0x00800000 /* [5212] compression status */
#define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA_5212 0x01000000 /* [5212] transmit antenna */
-/*
- * 5210/5211 hardware TX descriptor
+/**
+ * struct ath5k_hw_5210_tx_desc - 5210/5211 hardware TX descriptor
+ * @tx_ctl: The &struct ath5k_hw_2w_tx_ctl
+ * @tx_stat: The &struct ath5k_hw_tx_status
*/
struct ath5k_hw_5210_tx_desc {
struct ath5k_hw_2w_tx_ctl tx_ctl;
struct ath5k_hw_tx_status tx_stat;
} __packed __aligned(4);
-/*
- * 5212 hardware TX descriptor
+/**
+ * struct ath5k_hw_5212_tx_desc - 5212 hardware TX descriptor
+ * @tx_ctl: The &struct ath5k_hw_4w_tx_ctl
+ * @tx_stat: The &struct ath5k_hw_tx_status
*/
struct ath5k_hw_5212_tx_desc {
struct ath5k_hw_4w_tx_ctl tx_ctl;
struct ath5k_hw_tx_status tx_stat;
} __packed __aligned(4);
-/*
- * Common hardware RX descriptor
+/**
+ * struct ath5k_hw_all_rx_desc - Common hardware RX descriptor
+ * @rx_ctl: The &struct ath5k_hw_rx_ctl
+ * @rx_stat: The &struct ath5k_hw_rx_status
*/
struct ath5k_hw_all_rx_desc {
struct ath5k_hw_rx_ctl rx_ctl;
struct ath5k_hw_rx_status rx_stat;
} __packed __aligned(4);
-/*
- * Atheros hardware DMA descriptor
+/**
+ * struct ath5k_desc - Atheros hardware DMA descriptor
+ * @ds_link: Physical address of the next descriptor
+ * @ds_data: Physical address of data buffer (skb)
+ * @ud: Union containing hw_5xxx_tx_desc structs and hw_all_rx_desc
+ *
* This is read and written to by the hardware
*/
struct ath5k_desc {
- u32 ds_link; /* physical address of the next descriptor */
- u32 ds_data; /* physical address of data buffer (skb) */
+ u32 ds_link;
+ u32 ds_data;
union {
struct ath5k_hw_5210_tx_desc ds_tx5210;
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index 2481f9c..5cc9aa8 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -20,16 +20,13 @@
* DMA and interrupt masking functions *
\*************************************/
-/*
- * dma.c - DMA and interrupt masking functions
+/**
+ * DOC: DMA and interrupt masking functions
*
* Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
* handle queue setup for 5210 chipset (rest are handled on qcu.c).
* Also we setup interrupt mask register (IMR) and read the various interrupt
* status registers (ISR).
- *
- * TODO: Handle SISR on 5211+ and introduce a function to return the queue
- * number that resulted the interrupt.
*/
#include "ath5k.h"
@@ -42,22 +39,22 @@
\*********/
/**
- * ath5k_hw_start_rx_dma - Start DMA receive
- *
+ * ath5k_hw_start_rx_dma() - Start DMA receive
* @ah: The &struct ath5k_hw
*/
-void ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
+void
+ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
{
ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
ath5k_hw_reg_read(ah, AR5K_CR);
}
/**
- * ath5k_hw_stop_rx_dma - Stop DMA receive
- *
+ * ath5k_hw_stop_rx_dma() - Stop DMA receive
* @ah: The &struct ath5k_hw
*/
-static int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+static int
+ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
{
unsigned int i;
@@ -79,24 +76,24 @@
}
/**
- * ath5k_hw_get_rxdp - Get RX Descriptor's address
- *
+ * ath5k_hw_get_rxdp() - Get RX Descriptor's address
* @ah: The &struct ath5k_hw
*/
-u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
+u32
+ath5k_hw_get_rxdp(struct ath5k_hw *ah)
{
return ath5k_hw_reg_read(ah, AR5K_RXDP);
}
/**
- * ath5k_hw_set_rxdp - Set RX Descriptor's address
- *
+ * ath5k_hw_set_rxdp() - Set RX Descriptor's address
* @ah: The &struct ath5k_hw
* @phys_addr: RX descriptor address
*
* Returns -EIO if rx is active
*/
-int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+int
+ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
{
if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) {
ATH5K_DBG(ah, ATH5K_DEBUG_DMA,
@@ -114,8 +111,7 @@
\**********/
/**
- * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue
- *
+ * ath5k_hw_start_tx_dma() - Start DMA transmit for a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
*
@@ -128,7 +124,8 @@
* NOTE: Must be called after setting up tx control descriptor for that
* queue (see below).
*/
-int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+int
+ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
{
u32 tx_queue;
@@ -177,17 +174,16 @@
}
/**
- * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue
- *
+ * ath5k_hw_stop_tx_dma() - Stop DMA transmit on a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
*
* Stop DMA transmit on a specific hw queue and drain queue so we don't
* have any pending frames. Returns -EBUSY if we still have pending frames,
* -EINVAL if queue number is out of range or inactive.
- *
*/
-static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+static int
+ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
{
unsigned int i = 40;
u32 tx_queue, pending;
@@ -320,14 +316,14 @@
}
/**
- * ath5k_hw_stop_beacon_queue - Stop beacon queue
- *
- * @ah The &struct ath5k_hw
- * @queue The queue number
+ * ath5k_hw_stop_beacon_queue() - Stop beacon queue
+ * @ah: The &struct ath5k_hw
+ * @queue: The queue number
*
* Returns -EIO if queue didn't stop
*/
-int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
+int
+ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
{
int ret;
ret = ath5k_hw_stop_tx_dma(ah, queue);
@@ -340,8 +336,7 @@
}
/**
- * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue
- *
+ * ath5k_hw_get_txdp() - Get TX Descriptor's address for a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
*
@@ -352,7 +347,8 @@
*
* XXX: Is TXDP read and clear ?
*/
-u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
+u32
+ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
{
u16 tx_reg;
@@ -382,10 +378,10 @@
}
/**
- * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue
- *
+ * ath5k_hw_set_txdp() - Set TX Descriptor's address for a specific queue
* @ah: The &struct ath5k_hw
* @queue: The hw queue number
+ * @phys_addr: The physical address
*
* Set TX descriptor's address for a specific queue. For 5210 we ignore
* the queue number and we use tx queue type since we only have 2 queues
@@ -394,7 +390,8 @@
* Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
* active.
*/
-int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+int
+ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
{
u16 tx_reg;
@@ -435,8 +432,7 @@
}
/**
- * ath5k_hw_update_tx_triglevel - Update tx trigger level
- *
+ * ath5k_hw_update_tx_triglevel() - Update tx trigger level
* @ah: The &struct ath5k_hw
* @increase: Flag to force increase of trigger level
*
@@ -444,15 +440,15 @@
* buffer (aka FIFO threshold) that is used to indicate when PCU flushes
* the buffer and transmits its data. Lowering this results sending small
* frames more quickly but can lead to tx underruns, raising it a lot can
- * result other problems (i think bmiss is related). Right now we start with
- * the lowest possible (64Bytes) and if we get tx underrun we increase it using
- * the increase flag. Returns -EIO if we have reached maximum/minimum.
+ * result other problems. Right now we start with the lowest possible
+ * (64Bytes) and if we get tx underrun we increase it using the increase
+ * flag. Returns -EIO if we have reached maximum/minimum.
*
* XXX: Link this with tx DMA size ?
- * XXX: Use it to save interrupts ?
- * TODO: Needs testing, i think it's related to bmiss...
+ * XXX2: Use it to save interrupts ?
*/
-int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+int
+ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
{
u32 trigger_level, imr;
int ret = -EIO;
@@ -498,21 +494,20 @@
\*******************/
/**
- * ath5k_hw_is_intr_pending - Check if we have pending interrupts
- *
+ * ath5k_hw_is_intr_pending() - Check if we have pending interrupts
* @ah: The &struct ath5k_hw
*
* Check if we have pending interrupts to process. Returns 1 if we
* have pending interrupts and 0 if we haven't.
*/
-bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+bool
+ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
{
return ath5k_hw_reg_read(ah, AR5K_INTPEND) == 1 ? 1 : 0;
}
/**
- * ath5k_hw_get_isr - Get interrupt status
- *
+ * ath5k_hw_get_isr() - Get interrupt status
* @ah: The @struct ath5k_hw
* @interrupt_mask: Driver's interrupt mask used to filter out
* interrupts in sw.
@@ -523,62 +518,162 @@
* being mapped on some standard non hw-specific positions
* (check out &ath5k_int).
*
- * NOTE: We use read-and-clear register, so after this function is called ISR
- * is zeroed.
+ * NOTE: We do write-to-clear, so the active PISR/SISR bits at the time this
+ * function gets called are cleared on return.
*/
-int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+int
+ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
{
- u32 data;
+ u32 data = 0;
/*
- * Read interrupt status from the Interrupt Status register
- * on 5210
+ * Read interrupt status from Primary Interrupt
+ * Register.
+ *
+ * Note: PISR/SISR Not available on 5210
*/
if (ah->ah_version == AR5K_AR5210) {
- data = ath5k_hw_reg_read(ah, AR5K_ISR);
- if (unlikely(data == AR5K_INT_NOCARD)) {
- *interrupt_mask = data;
+ u32 isr = 0;
+ isr = ath5k_hw_reg_read(ah, AR5K_ISR);
+ if (unlikely(isr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = isr;
return -ENODEV;
}
- } else {
+
/*
- * Read interrupt status from Interrupt
- * Status Register shadow copy (Read And Clear)
- *
- * Note: PISR/SISR Not available on 5210
+ * Filter out the non-common bits from the interrupt
+ * status.
*/
- data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
- if (unlikely(data == AR5K_INT_NOCARD)) {
- *interrupt_mask = data;
+ *interrupt_mask = (isr & AR5K_INT_COMMON) & ah->ah_imr;
+
+ /* Hanlde INT_FATAL */
+ if (unlikely(isr & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
+ | AR5K_ISR_DPERR)))
+ *interrupt_mask |= AR5K_INT_FATAL;
+
+ /*
+ * XXX: BMISS interrupts may occur after association.
+ * I found this on 5210 code but it needs testing. If this is
+ * true we should disable them before assoc and re-enable them
+ * after a successful assoc + some jiffies.
+ interrupt_mask &= ~AR5K_INT_BMISS;
+ */
+
+ data = isr;
+ } else {
+ u32 pisr = 0;
+ u32 pisr_clear = 0;
+ u32 sisr0 = 0;
+ u32 sisr1 = 0;
+ u32 sisr2 = 0;
+ u32 sisr3 = 0;
+ u32 sisr4 = 0;
+
+ /* Read PISR and SISRs... */
+ pisr = ath5k_hw_reg_read(ah, AR5K_PISR);
+ if (unlikely(pisr == AR5K_INT_NOCARD)) {
+ *interrupt_mask = pisr;
return -ENODEV;
}
- }
- /*
- * Get abstract interrupt mask (driver-compatible)
- */
- *interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+ sisr0 = ath5k_hw_reg_read(ah, AR5K_SISR0);
+ sisr1 = ath5k_hw_reg_read(ah, AR5K_SISR1);
+ sisr2 = ath5k_hw_reg_read(ah, AR5K_SISR2);
+ sisr3 = ath5k_hw_reg_read(ah, AR5K_SISR3);
+ sisr4 = ath5k_hw_reg_read(ah, AR5K_SISR4);
- if (ah->ah_version != AR5K_AR5210) {
- u32 sisr2 = ath5k_hw_reg_read(ah, AR5K_RAC_SISR2);
+ /*
+ * PISR holds the logical OR of interrupt bits
+ * from SISR registers:
+ *
+ * TXOK and TXDESC -> Logical OR of TXOK and TXDESC
+ * per-queue bits on SISR0
+ *
+ * TXERR and TXEOL -> Logical OR of TXERR and TXEOL
+ * per-queue bits on SISR1
+ *
+ * TXURN -> Logical OR of TXURN per-queue bits on SISR2
+ *
+ * HIUERR -> Logical OR of MCABT, SSERR and DPER bits on SISR2
+ *
+ * BCNMISC -> Logical OR of TIM, CAB_END, DTIM_SYNC
+ * BCN_TIMEOUT, CAB_TIMEOUT and DTIM
+ * (and TSFOOR ?) bits on SISR2
+ *
+ * QCBRORN and QCBRURN -> Logical OR of QCBRORN and
+ * QCBRURN per-queue bits on SISR3
+ * QTRIG -> Logical OR of QTRIG per-queue bits on SISR4
+ *
+ * If we clean these bits on PISR we 'll also clear all
+ * related bits from SISRs, e.g. if we write the TXOK bit on
+ * PISR we 'll clean all TXOK bits from SISR0 so if a new TXOK
+ * interrupt got fired for another queue while we were reading
+ * the interrupt registers and we write back the TXOK bit on
+ * PISR we 'll lose it. So make sure that we don't write back
+ * on PISR any bits that come from SISRs. Clearing them from
+ * SISRs will also clear PISR so no need to worry here.
+ */
- /*HIU = Host Interface Unit (PCI etc)*/
- if (unlikely(data & (AR5K_ISR_HIUERR)))
- *interrupt_mask |= AR5K_INT_FATAL;
+ pisr_clear = pisr & ~AR5K_ISR_BITS_FROM_SISRS;
- /*Beacon Not Ready*/
- if (unlikely(data & (AR5K_ISR_BNR)))
- *interrupt_mask |= AR5K_INT_BNR;
+ /*
+ * Write to clear them...
+ * Note: This means that each bit we write back
+ * to the registers will get cleared, leaving the
+ * rest unaffected. So this won't affect new interrupts
+ * we didn't catch while reading/processing, we 'll get
+ * them next time get_isr gets called.
+ */
+ ath5k_hw_reg_write(ah, sisr0, AR5K_SISR0);
+ ath5k_hw_reg_write(ah, sisr1, AR5K_SISR1);
+ ath5k_hw_reg_write(ah, sisr2, AR5K_SISR2);
+ ath5k_hw_reg_write(ah, sisr3, AR5K_SISR3);
+ ath5k_hw_reg_write(ah, sisr4, AR5K_SISR4);
+ ath5k_hw_reg_write(ah, pisr_clear, AR5K_PISR);
+ /* Flush previous write */
+ ath5k_hw_reg_read(ah, AR5K_PISR);
- if (unlikely(sisr2 & (AR5K_SISR2_SSERR |
- AR5K_SISR2_DPERR |
- AR5K_SISR2_MCABT)))
- *interrupt_mask |= AR5K_INT_FATAL;
+ /*
+ * Filter out the non-common bits from the interrupt
+ * status.
+ */
+ *interrupt_mask = (pisr & AR5K_INT_COMMON) & ah->ah_imr;
- if (data & AR5K_ISR_TIM)
+
+ /* We treat TXOK,TXDESC, TXERR and TXEOL
+ * the same way (schedule the tx tasklet)
+ * so we track them all together per queue */
+ if (pisr & AR5K_ISR_TXOK)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXOK);
+
+ if (pisr & AR5K_ISR_TXDESC)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr0,
+ AR5K_SISR0_QCU_TXDESC);
+
+ if (pisr & AR5K_ISR_TXERR)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXERR);
+
+ if (pisr & AR5K_ISR_TXEOL)
+ ah->ah_txq_isr_txok_all |= AR5K_REG_MS(sisr1,
+ AR5K_SISR1_QCU_TXEOL);
+
+ /* Currently this is not much usefull since we treat
+ * all queues the same way if we get a TXURN (update
+ * tx trigger level) but we might need it later on*/
+ if (pisr & AR5K_ISR_TXURN)
+ ah->ah_txq_isr_txurn |= AR5K_REG_MS(sisr2,
+ AR5K_SISR2_QCU_TXURN);
+
+ /* Misc Beacon related interrupts */
+
+ /* For AR5211 */
+ if (pisr & AR5K_ISR_TIM)
*interrupt_mask |= AR5K_INT_TIM;
- if (data & AR5K_ISR_BCNMISC) {
+ /* For AR5212+ */
+ if (pisr & AR5K_ISR_BCNMISC) {
if (sisr2 & AR5K_SISR2_TIM)
*interrupt_mask |= AR5K_INT_TIM;
if (sisr2 & AR5K_SISR2_DTIM)
@@ -591,63 +686,39 @@
*interrupt_mask |= AR5K_INT_CAB_TIMEOUT;
}
- if (data & AR5K_ISR_RXDOPPLER)
- *interrupt_mask |= AR5K_INT_RX_DOPPLER;
- if (data & AR5K_ISR_QCBRORN) {
- *interrupt_mask |= AR5K_INT_QCBRORN;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
- AR5K_SISR3_QCBRORN);
- }
- if (data & AR5K_ISR_QCBRURN) {
- *interrupt_mask |= AR5K_INT_QCBRURN;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR3),
- AR5K_SISR3_QCBRURN);
- }
- if (data & AR5K_ISR_QTRIG) {
- *interrupt_mask |= AR5K_INT_QTRIG;
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR4),
- AR5K_SISR4_QTRIG);
- }
+ /* Below interrupts are unlikely to happen */
- if (data & AR5K_ISR_TXOK)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
- AR5K_SISR0_QCU_TXOK);
-
- if (data & AR5K_ISR_TXDESC)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR0),
- AR5K_SISR0_QCU_TXDESC);
-
- if (data & AR5K_ISR_TXERR)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
- AR5K_SISR1_QCU_TXERR);
-
- if (data & AR5K_ISR_TXEOL)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR1),
- AR5K_SISR1_QCU_TXEOL);
-
- if (data & AR5K_ISR_TXURN)
- ah->ah_txq_isr |= AR5K_REG_MS(
- ath5k_hw_reg_read(ah, AR5K_RAC_SISR2),
- AR5K_SISR2_QCU_TXURN);
- } else {
- if (unlikely(data & (AR5K_ISR_SSERR | AR5K_ISR_MCABT
- | AR5K_ISR_HIUERR | AR5K_ISR_DPERR)))
+ /* HIU = Host Interface Unit (PCI etc)
+ * Can be one of MCABT, SSERR, DPERR from SISR2 */
+ if (unlikely(pisr & (AR5K_ISR_HIUERR)))
*interrupt_mask |= AR5K_INT_FATAL;
- /*
- * XXX: BMISS interrupts may occur after association.
- * I found this on 5210 code but it needs testing. If this is
- * true we should disable them before assoc and re-enable them
- * after a successful assoc + some jiffies.
- interrupt_mask &= ~AR5K_INT_BMISS;
- */
+ /*Beacon Not Ready*/
+ if (unlikely(pisr & (AR5K_ISR_BNR)))
+ *interrupt_mask |= AR5K_INT_BNR;
+
+ /* A queue got CBR overrun */
+ if (unlikely(pisr & (AR5K_ISR_QCBRORN))) {
+ *interrupt_mask |= AR5K_INT_QCBRORN;
+ ah->ah_txq_isr_qcborn |= AR5K_REG_MS(sisr3,
+ AR5K_SISR3_QCBRORN);
+ }
+
+ /* A queue got CBR underrun */
+ if (unlikely(pisr & (AR5K_ISR_QCBRURN))) {
+ *interrupt_mask |= AR5K_INT_QCBRURN;
+ ah->ah_txq_isr_qcburn |= AR5K_REG_MS(sisr3,
+ AR5K_SISR3_QCBRURN);
+ }
+
+ /* A queue got triggered */
+ if (unlikely(pisr & (AR5K_ISR_QTRIG))) {
+ *interrupt_mask |= AR5K_INT_QTRIG;
+ ah->ah_txq_isr_qtrig |= AR5K_REG_MS(sisr4,
+ AR5K_SISR4_QTRIG);
+ }
+
+ data = pisr;
}
/*
@@ -661,8 +732,7 @@
}
/**
- * ath5k_hw_set_imr - Set interrupt mask
- *
+ * ath5k_hw_set_imr() - Set interrupt mask
* @ah: The &struct ath5k_hw
* @new_mask: The new interrupt mask to be set
*
@@ -670,7 +740,8 @@
* ath5k_int bits to hw-specific bits to remove abstraction and writing
* Interrupt Mask Register.
*/
-enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+enum ath5k_int
+ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
{
enum ath5k_int old_mask, int_mask;
@@ -697,16 +768,14 @@
u32 simr2 = ath5k_hw_reg_read(ah, AR5K_SIMR2)
& AR5K_SIMR2_QCU_TXURN;
+ /* Fatal interrupt abstraction for 5211+ */
if (new_mask & AR5K_INT_FATAL) {
int_mask |= AR5K_IMR_HIUERR;
simr2 |= (AR5K_SIMR2_MCABT | AR5K_SIMR2_SSERR
| AR5K_SIMR2_DPERR);
}
- /*Beacon Not Ready*/
- if (new_mask & AR5K_INT_BNR)
- int_mask |= AR5K_INT_BNR;
-
+ /* Misc beacon related interrupts */
if (new_mask & AR5K_INT_TIM)
int_mask |= AR5K_IMR_TIM;
@@ -721,8 +790,9 @@
if (new_mask & AR5K_INT_CAB_TIMEOUT)
simr2 |= AR5K_SISR2_CAB_TIMEOUT;
- if (new_mask & AR5K_INT_RX_DOPPLER)
- int_mask |= AR5K_IMR_RXDOPPLER;
+ /*Beacon Not Ready*/
+ if (new_mask & AR5K_INT_BNR)
+ int_mask |= AR5K_INT_BNR;
/* Note: Per queue interrupt masks
* are set via ath5k_hw_reset_tx_queue() (qcu.c) */
@@ -730,10 +800,12 @@
ath5k_hw_reg_write(ah, simr2, AR5K_SIMR2);
} else {
+ /* Fatal interrupt abstraction for 5210 */
if (new_mask & AR5K_INT_FATAL)
int_mask |= (AR5K_IMR_SSERR | AR5K_IMR_MCABT
| AR5K_IMR_HIUERR | AR5K_IMR_DPERR);
+ /* Only common interrupts left for 5210 (no SIMRs) */
ath5k_hw_reg_write(ah, int_mask, AR5K_IMR);
}
@@ -760,8 +832,7 @@
\********************/
/**
- * ath5k_hw_dma_init - Initialize DMA unit
- *
+ * ath5k_hw_dma_init() - Initialize DMA unit
* @ah: The &struct ath5k_hw
*
* Set DMA size and pre-enable interrupts
@@ -770,7 +841,8 @@
*
* XXX: Save/restore RXDP/TXDP registers ?
*/
-void ath5k_hw_dma_init(struct ath5k_hw *ah)
+void
+ath5k_hw_dma_init(struct ath5k_hw *ah)
{
/*
* Set Rx/Tx DMA Configuration
@@ -799,8 +871,7 @@
}
/**
- * ath5k_hw_dma_stop - stop DMA unit
- *
+ * ath5k_hw_dma_stop() - stop DMA unit
* @ah: The &struct ath5k_hw
*
* Stop tx/rx DMA and interrupts. Returns
@@ -810,7 +881,8 @@
* stuck frames on tx queues, only a reset
* can fix that.
*/
-int ath5k_hw_dma_stop(struct ath5k_hw *ah)
+int
+ath5k_hw_dma_stop(struct ath5k_hw *ah)
{
int i, qmax, err;
err = 0;
diff --git a/drivers/net/wireless/ath/ath5k/gpio.c b/drivers/net/wireless/ath/ath5k/gpio.c
index 8592978..73d3dd8 100644
--- a/drivers/net/wireless/ath/ath5k/gpio.c
+++ b/drivers/net/wireless/ath/ath5k/gpio.c
@@ -24,10 +24,33 @@
#include "reg.h"
#include "debug.h"
-/*
- * Set led state
+
+/**
+ * DOC: GPIO/LED functions
+ *
+ * Here we control the 6 bidirectional GPIO pins provided by the hw.
+ * We can set a GPIO pin to be an input or an output pin on GPIO control
+ * register and then read or set its status from GPIO data input/output
+ * registers.
+ *
+ * We also control the two LED pins provided by the hw, LED_0 is our
+ * "power" LED and LED_1 is our "network activity" LED but many scenarios
+ * are available from hw. Vendors might also provide LEDs connected to the
+ * GPIO pins, we handle them through the LED subsystem on led.c
*/
-void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
+
+
+/**
+ * ath5k_hw_set_ledstate() - Set led state
+ * @ah: The &struct ath5k_hw
+ * @state: One of AR5K_LED_*
+ *
+ * Used to set the LED blinking state. This only
+ * works for the LED connected to the LED_0, LED_1 pins,
+ * not the GPIO based.
+ */
+void
+ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
{
u32 led;
/*5210 has different led mode handling*/
@@ -74,10 +97,13 @@
AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
}
-/*
- * Set GPIO inputs
+/**
+ * ath5k_hw_set_gpio_input() - Set GPIO inputs
+ * @ah: The &struct ath5k_hw
+ * @gpio: GPIO pin to set as input
*/
-int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
+int
+ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
{
if (gpio >= AR5K_NUM_GPIO)
return -EINVAL;
@@ -89,10 +115,13 @@
return 0;
}
-/*
- * Set GPIO outputs
+/**
+ * ath5k_hw_set_gpio_output() - Set GPIO outputs
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to set as output
*/
-int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
+int
+ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
{
if (gpio >= AR5K_NUM_GPIO)
return -EINVAL;
@@ -104,10 +133,13 @@
return 0;
}
-/*
- * Get GPIO state
+/**
+ * ath5k_hw_get_gpio() - Get GPIO state
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to read
*/
-u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
+u32
+ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
{
if (gpio >= AR5K_NUM_GPIO)
return 0xffffffff;
@@ -117,10 +149,14 @@
0x1;
}
-/*
- * Set GPIO state
+/**
+ * ath5k_hw_set_gpio() - Set GPIO state
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to set
+ * @val: Value to set (boolean)
*/
-int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
+int
+ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
{
u32 data;
@@ -138,10 +174,19 @@
return 0;
}
-/*
- * Initialize the GPIO interrupt (RFKill switch)
+/**
+ * ath5k_hw_set_gpio_intr() - Initialize the GPIO interrupt (RFKill switch)
+ * @ah: The &struct ath5k_hw
+ * @gpio: The GPIO pin to use
+ * @interrupt_level: True to generate interrupt on active pin (high)
+ *
+ * This function is used to set up the GPIO interrupt for the hw RFKill switch.
+ * That switch is connected to a GPIO pin and it's number is stored on EEPROM.
+ * It can either open or close the circuit to indicate that we should disable
+ * RF/Wireless to save power (we also get that from EEPROM).
*/
-void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+void
+ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
u32 interrupt_level)
{
u32 data;
diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
index 1ffecc0..a1ea78e 100644
--- a/drivers/net/wireless/ath/ath5k/initvals.c
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -23,24 +23,27 @@
#include "reg.h"
#include "debug.h"
-/*
- * Mode-independent initial register writes
+/**
+ * struct ath5k_ini - Mode-independent initial register writes
+ * @ini_register: Register address
+ * @ini_value: Default value
+ * @ini_mode: 0 to write 1 to read (and clear)
*/
-
struct ath5k_ini {
u16 ini_register;
u32 ini_value;
enum {
AR5K_INI_WRITE = 0, /* Default */
- AR5K_INI_READ = 1, /* Cleared on read */
+ AR5K_INI_READ = 1,
} ini_mode;
};
-/*
- * Mode specific initial register values
+/**
+ * struct ath5k_ini_mode - Mode specific initial register values
+ * @mode_register: Register address
+ * @mode_value: Set of values for each enum ath5k_driver_mode
*/
-
struct ath5k_ini_mode {
u16 mode_register;
u32 mode_value[3];
@@ -386,11 +389,10 @@
/* Initial mode-specific settings for AR5211
* 5211 supports OFDM-only g (draft g) but we
- * need to test it !
- */
+ * need to test it ! */
static const struct ath5k_ini_mode ar5211_ini_mode[] = {
{ AR5K_TXCFG,
- /* A/XR B G */
+ /* A B G */
{ 0x00000015, 0x0000001d, 0x00000015 } },
{ AR5K_QUEUE_DFS_LOCAL_IFS(0),
{ 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
@@ -460,7 +462,7 @@
{ 0x00000010, 0x00000010, 0x00000010 } },
};
-/* Initial register settings for AR5212 */
+/* Initial register settings for AR5212 and newer chips */
static const struct ath5k_ini ar5212_ini_common_start[] = {
{ AR5K_RXDP, 0x00000000 },
{ AR5K_RXCFG, 0x00000005 },
@@ -724,7 +726,8 @@
{ 0x00000000, 0x00000000, 0x00000108 } },
};
-/* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */
+/* Initial mode-specific settings for AR5212 + RF5111
+ * (Written after ar5212_ini) */
static const struct ath5k_ini_mode rf5111_ini_mode_end[] = {
{ AR5K_TXCFG,
/* A/XR B G */
@@ -757,6 +760,7 @@
{ 0x1883800a, 0x1873800a, 0x1883800a } },
};
+/* Common for all modes */
static const struct ath5k_ini rf5111_ini_common_end[] = {
{ AR5K_DCU_FP, 0x00000000 },
{ AR5K_PHY_AGC, 0x00000000 },
@@ -774,7 +778,9 @@
{ 0xa23c, 0x13c889af },
};
-/* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */
+
+/* Initial mode-specific settings for AR5212 + RF5112
+ * (Written after ar5212_ini) */
static const struct ath5k_ini_mode rf5112_ini_mode_end[] = {
{ AR5K_TXCFG,
/* A/XR B G */
@@ -825,7 +831,9 @@
{ 0xa23c, 0x13c889af },
};
-/* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */
+
+/* Initial mode-specific settings for RF5413/5414
+ * (Written after ar5212_ini) */
static const struct ath5k_ini_mode rf5413_ini_mode_end[] = {
{ AR5K_TXCFG,
/* A/XR B G */
@@ -963,7 +971,8 @@
{ 0xa384, 0xf3307ff0 },
};
-/* Initial mode-specific settings for RF2413/2414 (Written after ar5212_ini) */
+/* Initial mode-specific settings for RF2413/2414
+ * (Written after ar5212_ini) */
/* XXX: a mode ? */
static const struct ath5k_ini_mode rf2413_ini_mode_end[] = {
{ AR5K_TXCFG,
@@ -1085,7 +1094,8 @@
{ 0xa384, 0xf3307ff0 },
};
-/* Initial mode-specific settings for RF2425 (Written after ar5212_ini) */
+/* Initial mode-specific settings for RF2425
+ * (Written after ar5212_ini) */
/* XXX: a mode ? */
static const struct ath5k_ini_mode rf2425_ini_mode_end[] = {
{ AR5K_TXCFG,
@@ -1357,10 +1367,15 @@
};
-/*
- * Write initial register dump
+/**
+ * ath5k_hw_ini_registers() - Write initial register dump common for all modes
+ * @ah: The &struct ath5k_hw
+ * @size: Dump size
+ * @ini_regs: The array of &struct ath5k_ini
+ * @skip_pcu: Skip PCU registers
*/
-static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size,
+static void
+ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size,
const struct ath5k_ini *ini_regs, bool skip_pcu)
{
unsigned int i;
@@ -1388,7 +1403,15 @@
}
}
-static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah,
+/**
+ * ath5k_hw_ini_mode_registers() - Write initial mode-specific register dump
+ * @ah: The &struct ath5k_hw
+ * @size: Dump size
+ * @ini_mode: The array of &struct ath5k_ini_mode
+ * @mode: One of enum ath5k_driver_mode
+ */
+static void
+ath5k_hw_ini_mode_registers(struct ath5k_hw *ah,
unsigned int size, const struct ath5k_ini_mode *ini_mode,
u8 mode)
{
@@ -1402,7 +1425,17 @@
}
-int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu)
+/**
+ * ath5k_hw_write_initvals() - Write initial chip-specific register dump
+ * @ah: The &struct ath5k_hw
+ * @mode: One of enum ath5k_driver_mode
+ * @skip_pcu: Skip PCU registers
+ *
+ * Write initial chip-specific register dump, to get the chipset on a
+ * clean and ready-to-work state after warm reset.
+ */
+int
+ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu)
{
/*
* Write initial register settings
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index c1dff2c..849fa06 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -18,6 +18,7 @@
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/etherdevice.h>
+#include <linux/module.h>
#include "../ath.h"
#include "ath5k.h"
#include "debug.h"
@@ -97,7 +98,7 @@
0xffff);
return true;
}
- udelay(15);
+ usleep_range(15, 20);
}
return false;
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index a7eafa3..cebfd6f 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -30,11 +30,47 @@
#include "reg.h"
#include "debug.h"
-/*
+/**
+ * DOC: Protocol Control Unit (PCU) functions
+ *
+ * Protocol control unit is responsible to maintain various protocol
+ * properties before a frame is send and after a frame is received to/from
+ * baseband. To be more specific, PCU handles:
+ *
+ * - Buffering of RX and TX frames (after QCU/DCUs)
+ *
+ * - Encrypting and decrypting (using the built-in engine)
+ *
+ * - Generating ACKs, RTS/CTS frames
+ *
+ * - Maintaining TSF
+ *
+ * - FCS
+ *
+ * - Updating beacon data (with TSF etc)
+ *
+ * - Generating virtual CCA
+ *
+ * - RX/Multicast filtering
+ *
+ * - BSSID filtering
+ *
+ * - Various statistics
+ *
+ * -Different operating modes: AP, STA, IBSS
+ *
+ * Note: Most of these functions can be tweaked/bypassed so you can do
+ * them on sw above for debugging or research. For more infos check out PCU
+ * registers on reg.h.
+ */
+
+/**
+ * DOC: ACK rates
+ *
* AR5212+ can use higher rates for ack transmission
* based on current tx rate instead of the base rate.
* It does this to better utilize channel usage.
- * This is a mapping between G rates (that cover both
+ * There is a mapping between G rates (that cover both
* CCK and OFDM) and ack rates that we use when setting
* rate -> duration table. This mapping is hw-based so
* don't change anything.
@@ -63,17 +99,18 @@
\*******************/
/**
- * ath5k_hw_get_frame_duration - Get tx time of a frame
- *
+ * ath5k_hw_get_frame_duration() - Get tx time of a frame
* @ah: The &struct ath5k_hw
* @len: Frame's length in bytes
* @rate: The @struct ieee80211_rate
+ * @shortpre: Indicate short preample
*
* Calculate tx duration of a frame given it's rate and length
* It extends ieee80211_generic_frame_duration for non standard
* bwmodes.
*/
-int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
+int
+ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
int len, struct ieee80211_rate *rate, bool shortpre)
{
int sifs, preamble, plcp_bits, sym_time;
@@ -129,11 +166,11 @@
}
/**
- * ath5k_hw_get_default_slottime - Get the default slot time for current mode
- *
+ * ath5k_hw_get_default_slottime() - Get the default slot time for current mode
* @ah: The &struct ath5k_hw
*/
-unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
+unsigned int
+ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
{
struct ieee80211_channel *channel = ah->ah_current_channel;
unsigned int slot_time;
@@ -160,11 +197,11 @@
}
/**
- * ath5k_hw_get_default_sifs - Get the default SIFS for current mode
- *
+ * ath5k_hw_get_default_sifs() - Get the default SIFS for current mode
* @ah: The &struct ath5k_hw
*/
-unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
+unsigned int
+ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
{
struct ieee80211_channel *channel = ah->ah_current_channel;
unsigned int sifs;
@@ -191,17 +228,17 @@
}
/**
- * ath5k_hw_update_mib_counters - Update MIB counters (mac layer statistics)
- *
+ * ath5k_hw_update_mib_counters() - Update MIB counters (mac layer statistics)
* @ah: The &struct ath5k_hw
*
* Reads MIB counters from PCU and updates sw statistics. Is called after a
* MIB interrupt, because one of these counters might have reached their maximum
* and triggered the MIB interrupt, to let us read and clear the counter.
*
- * Is called in interrupt context!
+ * NOTE: Is called in interrupt context!
*/
-void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
+void
+ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
{
struct ath5k_statistics *stats = &ah->stats;
@@ -219,10 +256,8 @@
\******************/
/**
- * ath5k_hw_write_rate_duration - fill rate code to duration table
- *
- * @ah: the &struct ath5k_hw
- * @mode: one of enum ath5k_driver_mode
+ * ath5k_hw_write_rate_duration() - Fill rate code to duration table
+ * @ah: The &struct ath5k_hw
*
* Write the rate code to duration table upon hw reset. This is a helper for
* ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on
@@ -236,7 +271,8 @@
* that include all OFDM and CCK rates.
*
*/
-static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
+static inline void
+ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
{
struct ieee80211_rate *rate;
unsigned int i;
@@ -280,12 +316,12 @@
}
/**
- * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
- *
+ * ath5k_hw_set_ack_timeout() - Set ACK timeout on PCU
* @ah: The &struct ath5k_hw
* @timeout: Timeout in usec
*/
-static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+static int
+ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
{
if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK))
<= timeout)
@@ -298,12 +334,12 @@
}
/**
- * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
- *
+ * ath5k_hw_set_cts_timeout() - Set CTS timeout on PCU
* @ah: The &struct ath5k_hw
* @timeout: Timeout in usec
*/
-static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+static int
+ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
{
if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS))
<= timeout)
@@ -321,14 +357,14 @@
\*******************/
/**
- * ath5k_hw_set_lladdr - Set station id
- *
+ * ath5k_hw_set_lladdr() - Set station id
* @ah: The &struct ath5k_hw
- * @mac: The card's mac address
+ * @mac: The card's mac address (array of octets)
*
* Set station id on hw using the provided mac address
*/
-int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+int
+ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
{
struct ath_common *common = ath5k_hw_common(ah);
u32 low_id, high_id;
@@ -349,14 +385,14 @@
}
/**
- * ath5k_hw_set_bssid - Set current BSSID on hw
- *
+ * ath5k_hw_set_bssid() - Set current BSSID on hw
* @ah: The &struct ath5k_hw
*
* Sets the current BSSID and BSSID mask we have from the
* common struct into the hardware
*/
-void ath5k_hw_set_bssid(struct ath5k_hw *ah)
+void
+ath5k_hw_set_bssid(struct ath5k_hw *ah)
{
struct ath_common *common = ath5k_hw_common(ah);
u16 tim_offset = 0;
@@ -389,7 +425,23 @@
ath5k_hw_enable_pspoll(ah, NULL, 0);
}
-void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+/**
+ * ath5k_hw_set_bssid_mask() - Filter out bssids we listen
+ * @ah: The &struct ath5k_hw
+ * @mask: The BSSID mask to set (array of octets)
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * For more information check out ../hw.c of the common ath module.
+ */
+void
+ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
{
struct ath_common *common = ath5k_hw_common(ah);
@@ -400,18 +452,21 @@
ath_hw_setbssidmask(common);
}
-/*
- * Set multicast filter
+/**
+ * ath5k_hw_set_mcast_filter() - Set multicast filter
+ * @ah: The &struct ath5k_hw
+ * @filter0: Lower 32bits of muticast filter
+ * @filter1: Higher 16bits of multicast filter
*/
-void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+void
+ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
{
ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
}
/**
- * ath5k_hw_get_rx_filter - Get current rx filter
- *
+ * ath5k_hw_get_rx_filter() - Get current rx filter
* @ah: The &struct ath5k_hw
*
* Returns the RX filter by reading rx filter and
@@ -420,7 +475,8 @@
* and pass to the driver. For a list of frame types
* check out reg.h.
*/
-u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+u32
+ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
{
u32 data, filter = 0;
@@ -440,8 +496,7 @@
}
/**
- * ath5k_hw_set_rx_filter - Set rx filter
- *
+ * ath5k_hw_set_rx_filter() - Set rx filter
* @ah: The &struct ath5k_hw
* @filter: RX filter mask (see reg.h)
*
@@ -449,7 +504,8 @@
* register on 5212 and newer chips so that we have proper PHY
* error reporting.
*/
-void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+void
+ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
{
u32 data = 0;
@@ -493,13 +549,13 @@
#define ATH5K_MAX_TSF_READ 10
/**
- * ath5k_hw_get_tsf64 - Get the full 64bit TSF
- *
+ * ath5k_hw_get_tsf64() - Get the full 64bit TSF
* @ah: The &struct ath5k_hw
*
* Returns the current TSF
*/
-u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+u64
+ath5k_hw_get_tsf64(struct ath5k_hw *ah)
{
u32 tsf_lower, tsf_upper1, tsf_upper2;
int i;
@@ -536,28 +592,30 @@
return ((u64)tsf_upper1 << 32) | tsf_lower;
}
+#undef ATH5K_MAX_TSF_READ
+
/**
- * ath5k_hw_set_tsf64 - Set a new 64bit TSF
- *
+ * ath5k_hw_set_tsf64() - Set a new 64bit TSF
* @ah: The &struct ath5k_hw
* @tsf64: The new 64bit TSF
*
* Sets the new TSF
*/
-void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
+void
+ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64)
{
ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32);
ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32);
}
/**
- * ath5k_hw_reset_tsf - Force a TSF reset
- *
+ * ath5k_hw_reset_tsf() - Force a TSF reset
* @ah: The &struct ath5k_hw
*
* Forces a TSF reset on PCU
*/
-void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+void
+ath5k_hw_reset_tsf(struct ath5k_hw *ah)
{
u32 val;
@@ -573,10 +631,17 @@
ath5k_hw_reg_write(ah, val, AR5K_BEACON);
}
-/*
- * Initialize beacon timers
+/**
+ * ath5k_hw_init_beacon_timers() - Initialize beacon timers
+ * @ah: The &struct ath5k_hw
+ * @next_beacon: Next TBTT
+ * @interval: Current beacon interval
+ *
+ * This function is used to initialize beacon timers based on current
+ * operation mode and settings.
*/
-void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+void
+ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
{
u32 timer1, timer2, timer3;
@@ -655,8 +720,7 @@
}
/**
- * ath5k_check_timer_win - Check if timer B is timer A + window
- *
+ * ath5k_check_timer_win() - Check if timer B is timer A + window
* @a: timer a (before b)
* @b: timer b (after a)
* @window: difference between a and b
@@ -686,12 +750,11 @@
}
/**
- * ath5k_hw_check_beacon_timers - Check if the beacon timers are correct
- *
+ * ath5k_hw_check_beacon_timers() - Check if the beacon timers are correct
* @ah: The &struct ath5k_hw
* @intval: beacon interval
*
- * This is a workaround for IBSS mode:
+ * This is a workaround for IBSS mode
*
* The need for this function arises from the fact that we have 4 separate
* HW timer registers (TIMER0 - TIMER3), which are closely related to the
@@ -746,14 +809,14 @@
}
/**
- * ath5k_hw_set_coverage_class - Set IEEE 802.11 coverage class
- *
+ * ath5k_hw_set_coverage_class() - Set IEEE 802.11 coverage class
* @ah: The &struct ath5k_hw
* @coverage_class: IEEE 802.11 coverage class number
*
* Sets IFS intervals and ACK/CTS timeouts for given coverage class.
*/
-void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
+void
+ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
{
/* As defined by IEEE 802.11-2007 17.3.8.6 */
int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class;
@@ -772,8 +835,7 @@
\***************************/
/**
- * ath5k_hw_start_rx_pcu - Start RX engine
- *
+ * ath5k_hw_start_rx_pcu() - Start RX engine
* @ah: The &struct ath5k_hw
*
* Starts RX engine on PCU so that hw can process RXed frames
@@ -781,32 +843,33 @@
*
* NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
*/
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+void
+ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
{
AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
}
/**
- * at5k_hw_stop_rx_pcu - Stop RX engine
- *
+ * at5k_hw_stop_rx_pcu() - Stop RX engine
* @ah: The &struct ath5k_hw
*
* Stops RX engine on PCU
*/
-void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+void
+ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
{
AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
}
/**
- * ath5k_hw_set_opmode - Set PCU operating mode
- *
+ * ath5k_hw_set_opmode() - Set PCU operating mode
* @ah: The &struct ath5k_hw
- * @op_mode: &enum nl80211_iftype operating mode
+ * @op_mode: One of enum nl80211_iftype
*
* Configure PCU for the various operating modes (AP/STA etc)
*/
-int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+int
+ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
{
struct ath_common *common = ath5k_hw_common(ah);
u32 pcu_reg, beacon_reg, low_id, high_id;
@@ -873,8 +936,17 @@
return 0;
}
-void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
- u8 mode)
+/**
+ * ath5k_hw_pcu_init() - Initialize PCU
+ * @ah: The &struct ath5k_hw
+ * @op_mode: One of enum nl80211_iftype
+ * @mode: One of enum ath5k_driver_mode
+ *
+ * This function is used to initialize PCU by setting current
+ * operation mode and various other settings.
+ */
+void
+ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
{
/* Set bssid and bssid mask */
ath5k_hw_set_bssid(ah);
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 01cb72d..e1f8613 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1,6 +1,4 @@
/*
- * PHY functions
- *
* Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
* Copyright (c) 2006-2009 Nick Kossifidis <mickflemm@gmail.com>
* Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
@@ -20,6 +18,10 @@
*
*/
+/***********************\
+* PHY related functions *
+\***********************/
+
#include <linux/delay.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
@@ -31,14 +33,53 @@
#include "../regd.h"
+/**
+ * DOC: PHY related functions
+ *
+ * Here we handle the low-level functions related to baseband
+ * and analog frontend (RF) parts. This is by far the most complex
+ * part of the hw code so make sure you know what you are doing.
+ *
+ * Here is a list of what this is all about:
+ *
+ * - Channel setting/switching
+ *
+ * - Automatic Gain Control (AGC) calibration
+ *
+ * - Noise Floor calibration
+ *
+ * - I/Q imbalance calibration (QAM correction)
+ *
+ * - Calibration due to thermal changes (gain_F)
+ *
+ * - Spur noise mitigation
+ *
+ * - RF/PHY initialization for the various operating modes and bwmodes
+ *
+ * - Antenna control
+ *
+ * - TX power control per channel/rate/packet type
+ *
+ * Also have in mind we never got documentation for most of these
+ * functions, what we have comes mostly from Atheros's code, reverse
+ * engineering and patent docs/presentations etc.
+ */
+
+
/******************\
* Helper functions *
\******************/
-/*
- * Get the PHY Chip revision
+/**
+ * ath5k_hw_radio_revision() - Get the PHY Chip revision
+ * @ah: The &struct ath5k_hw
+ * @band: One of enum ieee80211_band
+ *
+ * Returns the revision number of a 2GHz, 5GHz or single chip
+ * radio.
*/
-u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
+u16
+ath5k_hw_radio_revision(struct ath5k_hw *ah, enum ieee80211_band band)
{
unsigned int i;
u32 srev;
@@ -58,7 +99,7 @@
return 0;
}
- mdelay(2);
+ usleep_range(2000, 2500);
/* ...wait until PHY is ready and read the selected radio revision */
ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34));
@@ -81,10 +122,16 @@
return ret;
}
-/*
- * Check if a channel is supported
+/**
+ * ath5k_channel_ok() - Check if a channel is supported by the hw
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Note: We don't do any regulatory domain checks here, it's just
+ * a sanity check.
*/
-bool ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+bool
+ath5k_channel_ok(struct ath5k_hw *ah, struct ieee80211_channel *channel)
{
u16 freq = channel->center_freq;
@@ -101,7 +148,13 @@
return false;
}
-bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+/**
+ * ath5k_hw_chan_has_spur_noise() - Check if channel is sensitive to spur noise
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ */
+bool
+ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u8 refclk_freq;
@@ -122,11 +175,20 @@
return false;
}
-/*
- * Used to modify RF Banks before writing them to AR5K_RF_BUFFER
+/**
+ * ath5k_hw_rfb_op() - Perform an operation on the given RF Buffer
+ * @ah: The &struct ath5k_hw
+ * @rf_regs: The struct ath5k_rf_reg
+ * @val: New value
+ * @reg_id: RF register ID
+ * @set: Indicate we need to swap data
+ *
+ * This is an internal function used to modify RF Banks before
+ * writing them to AR5K_RF_BUFFER. Check out rfbuffer.h for more
+ * infos.
*/
-static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
- const struct ath5k_rf_reg *rf_regs,
+static unsigned int
+ath5k_hw_rfb_op(struct ath5k_hw *ah, const struct ath5k_rf_reg *rf_regs,
u32 val, u8 reg_id, bool set)
{
const struct ath5k_rf_reg *rfreg = NULL;
@@ -204,8 +266,7 @@
}
/**
- * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
- *
+ * ath5k_hw_write_ofdm_timings() - set OFDM timings on AR5212
* @ah: the &struct ath5k_hw
* @channel: the currently set channel upon reset
*
@@ -216,10 +277,11 @@
* mantissa and provide these values on hw.
*
* For more infos i think this patent is related
- * http://www.freepatentsonline.com/7184495.html
+ * "http://www.freepatentsonline.com/7184495.html"
*/
-static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
- struct ieee80211_channel *channel)
+static inline int
+ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel)
{
/* Get exponent and mantissa and set it */
u32 coef_scaled, coef_exp, coef_man,
@@ -278,6 +340,10 @@
return 0;
}
+/**
+ * ath5k_hw_phy_disable() - Disable PHY
+ * @ah: The &struct ath5k_hw
+ */
int ath5k_hw_phy_disable(struct ath5k_hw *ah)
{
/*Just a try M.F.*/
@@ -286,10 +352,13 @@
return 0;
}
-/*
- * Wait for synth to settle
+/**
+ * ath5k_hw_wait_for_synth() - Wait for synth to settle
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
*/
-static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
+static void
+ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
/*
@@ -308,9 +377,9 @@
delay = delay << 2;
/* XXX: /2 on turbo ? Let's be safe
* for now */
- udelay(100 + delay);
+ usleep_range(100 + delay, 100 + (2 * delay));
} else {
- mdelay(1);
+ usleep_range(1000, 1500);
}
}
@@ -319,7 +388,9 @@
* RF Gain optimization *
\**********************/
-/*
+/**
+ * DOC: RF Gain optimization
+ *
* This code is used to optimize RF gain on different environments
* (temperature mostly) based on feedback from a power detector.
*
@@ -328,22 +399,22 @@
* no gain optimization ladder-.
*
* For more infos check out this patent doc
- * http://www.freepatentsonline.com/7400691.html
+ * "http://www.freepatentsonline.com/7400691.html"
*
* This paper describes power drops as seen on the receiver due to
* probe packets
- * http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
- * %20of%20Power%20Control.pdf
+ * "http://www.cnri.dit.ie/publications/ICT08%20-%20Practical%20Issues
+ * %20of%20Power%20Control.pdf"
*
* And this is the MadWiFi bug entry related to the above
- * http://madwifi-project.org/ticket/1659
+ * "http://madwifi-project.org/ticket/1659"
* with various measurements and diagrams
- *
- * TODO: Deal with power drops due to probes by setting an appropriate
- * tx power on the probe packets ! Make this part of the calibration process.
*/
-/* Initialize ah_gain during attach */
+/**
+ * ath5k_hw_rfgain_opt_init() - Initialize ah_gain during attach
+ * @ah: The &struct ath5k_hw
+ */
int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
{
/* Initialize the gain optimization values */
@@ -367,17 +438,21 @@
return 0;
}
-/* Schedule a gain probe check on the next transmitted packet.
+/**
+ * ath5k_hw_request_rfgain_probe() - Request a PAPD probe packet
+ * @ah: The &struct ath5k_hw
+ *
+ * Schedules a gain probe check on the next transmitted packet.
* That means our next packet is going to be sent with lower
* tx power and a Peak to Average Power Detector (PAPD) will try
* to measure the gain.
*
- * XXX: How about forcing a tx packet (bypassing PCU arbitrator etc)
+ * TODO: Force a tx packet (bypassing PCU arbitrator etc)
* just after we enable the probe so that we don't mess with
- * standard traffic ? Maybe it's time to use sw interrupts and
- * a probe tasklet !!!
+ * standard traffic.
*/
-static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
+static void
+ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
{
/* Skip if gain calibration is inactive or
@@ -395,9 +470,15 @@
}
-/* Calculate gain_F measurement correction
- * based on the current step for RF5112 rev. 2 */
-static u32 ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_rf_gainf_corr() - Calculate Gain_F measurement correction
+ * @ah: The &struct ath5k_hw
+ *
+ * Calculate Gain_F measurement correction
+ * based on the current step for RF5112 rev. 2
+ */
+static u32
+ath5k_hw_rf_gainf_corr(struct ath5k_hw *ah)
{
u32 mix, step;
u32 *rf;
@@ -450,11 +531,19 @@
return ah->ah_gain.g_f_corr;
}
-/* Check if current gain_F measurement is in the range of our
+/**
+ * ath5k_hw_rf_check_gainf_readback() - Validate Gain_F feedback from detector
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if current gain_F measurement is in the range of our
* power detector windows. If we get a measurement outside range
* we know it's not accurate (detectors can't measure anything outside
- * their detection window) so we must ignore it */
-static bool ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
+ * their detection window) so we must ignore it.
+ *
+ * Returns true if readback was O.K. or false on failure
+ */
+static bool
+ath5k_hw_rf_check_gainf_readback(struct ath5k_hw *ah)
{
const struct ath5k_rf_reg *rf_regs;
u32 step, mix_ovr, level[4];
@@ -506,9 +595,15 @@
ah->ah_gain.g_current <= level[3]);
}
-/* Perform gain_F adjustment by choosing the right set
- * of parameters from RF gain optimization ladder */
-static s8 ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_rf_gainf_adjust() - Perform Gain_F adjustment
+ * @ah: The &struct ath5k_hw
+ *
+ * Choose the right target gain based on current gain
+ * and RF gain optimization ladder
+ */
+static s8
+ath5k_hw_rf_gainf_adjust(struct ath5k_hw *ah)
{
const struct ath5k_gain_opt *go;
const struct ath5k_gain_opt_step *g_step;
@@ -572,13 +667,18 @@
return ret;
}
-/* Main callback for thermal RF gain calibration engine
+/**
+ * ath5k_hw_gainf_calibrate() - Do a gain_F calibration
+ * @ah: The &struct ath5k_hw
+ *
+ * Main callback for thermal RF gain calibration engine
* Check for a new gain reading and schedule an adjustment
* if needed.
*
- * TODO: Use sw interrupt to schedule reset if gain_F needs
- * adjustment */
-enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
+ * Returns one of enum ath5k_rfgain codes
+ */
+enum ath5k_rfgain
+ath5k_hw_gainf_calibrate(struct ath5k_hw *ah)
{
u32 data, type;
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
@@ -638,10 +738,18 @@
return ah->ah_gain.g_state;
}
-/* Write initial RF gain table to set the RF sensitivity
- * this one works on all RF chips and has nothing to do
- * with gain_F calibration */
-static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
+/**
+ * ath5k_hw_rfgain_init() - Write initial RF gain settings to hw
+ * @ah: The &struct ath5k_hw
+ * @band: One of enum ieee80211_band
+ *
+ * Write initial RF gain table to set the RF sensitivity.
+ *
+ * NOTE: This one works on all RF chips and has nothing to do
+ * with Gain_F calibration
+ */
+static int
+ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
{
const struct ath5k_ini_rfgain *ath5k_rfg;
unsigned int i, size, index;
@@ -688,16 +796,23 @@
}
-
/********************\
* RF Registers setup *
\********************/
-/*
- * Setup RF registers by writing RF buffer on hw
+/**
+ * ath5k_hw_rfregs_init() - Initialize RF register settings
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @mode: One of enum ath5k_driver_mode
+ *
+ * Setup RF registers by writing RF buffer on hw. For
+ * more infos on this, check out rfbuffer.h
*/
-static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
- struct ieee80211_channel *channel, unsigned int mode)
+static int
+ath5k_hw_rfregs_init(struct ath5k_hw *ah,
+ struct ieee80211_channel *channel,
+ unsigned int mode)
{
const struct ath5k_rf_reg *rf_regs;
const struct ath5k_ini_rfbuffer *ini_rfb;
@@ -1055,19 +1170,18 @@
PHY/RF channel functions
\**************************/
-/*
- * Conversion needed for RF5110
+/**
+ * ath5k_hw_rf5110_chan2athchan() - Convert channel freq on RF5110
+ * @channel: The &struct ieee80211_channel
+ *
+ * Map channel frequency to IEEE channel number and convert it
+ * to an internal channel value used by the RF5110 chipset.
*/
-static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
+static u32
+ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
{
u32 athchan;
- /*
- * Convert IEEE channel/MHz to an internal channel value used
- * by the AR5210 chipset. This has not been verified with
- * newer chipsets like the AR5212A who have a completely
- * different RF/PHY part.
- */
athchan = (ath5k_hw_bitswap(
(ieee80211_frequency_to_channel(
channel->center_freq) - 24) / 2, 5)
@@ -1075,10 +1189,13 @@
return athchan;
}
-/*
- * Set channel on RF5110
+/**
+ * ath5k_hw_rf5110_channel() - Set channel frequency on RF5110
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
*/
-static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 data;
@@ -1089,15 +1206,23 @@
data = ath5k_hw_rf5110_chan2athchan(channel);
ath5k_hw_reg_write(ah, data, AR5K_RF_BUFFER);
ath5k_hw_reg_write(ah, 0, AR5K_RF_BUFFER_CONTROL_0);
- mdelay(1);
+ usleep_range(1000, 1500);
return 0;
}
-/*
- * Conversion needed for 5111
+/**
+ * ath5k_hw_rf5111_chan2athchan() - Handle 2GHz channels on RF5111/2111
+ * @ieee: IEEE channel number
+ * @athchan: The &struct ath5k_athchan_2ghz
+ *
+ * In order to enable the RF2111 frequency converter on RF5111/2111 setups
+ * we need to add some offsets and extra flags to the data values we pass
+ * on to the PHY. So for every 2GHz channel this function gets called
+ * to do the conversion.
*/
-static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
+static int
+ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
struct ath5k_athchan_2ghz *athchan)
{
int channel;
@@ -1123,10 +1248,13 @@
return 0;
}
-/*
- * Set channel on 5111
+/**
+ * ath5k_hw_rf5111_channel() - Set channel frequency on RF5111/2111
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
*/
-static int ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5111_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
struct ath5k_athchan_2ghz ath5k_channel_2ghz;
@@ -1171,10 +1299,20 @@
return 0;
}
-/*
- * Set channel on 5112 and newer
+/**
+ * ath5k_hw_rf5112_channel() - Set channel frequency on 5112 and newer
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * On RF5112/2112 and newer we don't need to do any conversion.
+ * We pass the frequency value after a few modifications to the
+ * chip directly.
+ *
+ * NOTE: Make sure channel frequency given is within our range or else
+ * we might damage the chip ! Use ath5k_channel_ok before calling this one.
*/
-static int ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5112_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 data, data0, data1, data2;
@@ -1183,17 +1321,37 @@
data = data0 = data1 = data2 = 0;
c = channel->center_freq;
+ /* My guess based on code:
+ * 2GHz RF has 2 synth modes, one with a Local Oscillator
+ * at 2224Hz and one with a LO at 2192Hz. IF is 1520Hz
+ * (3040/2). data0 is used to set the PLL divider and data1
+ * selects synth mode. */
if (c < 4800) {
+ /* Channel 14 and all frequencies with 2Hz spacing
+ * below/above (non-standard channels) */
if (!((c - 2224) % 5)) {
+ /* Same as (c - 2224) / 5 */
data0 = ((2 * (c - 704)) - 3040) / 10;
data1 = 1;
+ /* Channel 1 and all frequencies with 5Hz spacing
+ * below/above (standard channels without channel 14) */
} else if (!((c - 2192) % 5)) {
+ /* Same as (c - 2192) / 5 */
data0 = ((2 * (c - 672)) - 3040) / 10;
data1 = 0;
} else
return -EINVAL;
data0 = ath5k_hw_bitswap((data0 << 2) & 0xff, 8);
+ /* This is more complex, we have a single synthesizer with
+ * 4 reference clock settings (?) based on frequency spacing
+ * and set using data2. LO is at 4800Hz and data0 is again used
+ * to set some divider.
+ *
+ * NOTE: There is an old atheros presentation at Stanford
+ * that mentions a method called dual direct conversion
+ * with 1GHz sliding IF for RF5110. Maybe that's what we
+ * have here, or an updated version. */
} else if ((c % 5) != 2 || c > 5435) {
if (!(c % 20) && c >= 5120) {
data0 = ath5k_hw_bitswap(((c - 4800) / 20 << 2), 8);
@@ -1219,10 +1377,16 @@
return 0;
}
-/*
- * Set the channel on the RF2425
+/**
+ * ath5k_hw_rf2425_channel() - Set channel frequency on RF2425
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * AR2425/2417 have a different 2GHz RF so code changes
+ * a little bit from RF5112.
*/
-static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 data, data0, data2;
@@ -1258,10 +1422,16 @@
return 0;
}
-/*
- * Set a channel on the radio chip
+/**
+ * ath5k_hw_channel() - Set a channel on the radio chip
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * This is the main function called to set a channel on the
+ * radio chip based on the radio chip version.
*/
-static int ath5k_hw_channel(struct ath5k_hw *ah,
+static int
+ath5k_hw_channel(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
int ret;
@@ -1313,11 +1483,46 @@
return 0;
}
+
/*****************\
PHY calibration
\*****************/
-static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
+/**
+ * DOC: PHY Calibration routines
+ *
+ * Noise floor calibration: When we tell the hardware to
+ * perform a noise floor calibration by setting the
+ * AR5K_PHY_AGCCTL_NF bit on AR5K_PHY_AGCCTL, it will periodically
+ * sample-and-hold the minimum noise level seen at the antennas.
+ * This value is then stored in a ring buffer of recently measured
+ * noise floor values so we have a moving window of the last few
+ * samples. The median of the values in the history is then loaded
+ * into the hardware for its own use for RSSI and CCA measurements.
+ * This type of calibration doesn't interfere with traffic.
+ *
+ * AGC calibration: When we tell the hardware to perform
+ * an AGC (Automatic Gain Control) calibration by setting the
+ * AR5K_PHY_AGCCTL_CAL, hw disconnects the antennas and does
+ * a calibration on the DC offsets of ADCs. During this period
+ * rx/tx gets disabled so we have to deal with it on the driver
+ * part.
+ *
+ * I/Q calibration: When we tell the hardware to perform
+ * an I/Q calibration, it tries to correct I/Q imbalance and
+ * fix QAM constellation by sampling data from rxed frames.
+ * It doesn't interfere with traffic.
+ *
+ * For more infos on AGC and I/Q calibration check out patent doc
+ * #03/094463.
+ */
+
+/**
+ * ath5k_hw_read_measured_noise_floor() - Read measured NF from hw
+ * @ah: The &struct ath5k_hw
+ */
+static s32
+ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
{
s32 val;
@@ -1325,7 +1530,12 @@
return sign_extend32(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 8);
}
-void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_init_nfcal_hist() - Initialize NF calibration history buffer
+ * @ah: The &struct ath5k_hw
+ */
+void
+ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
{
int i;
@@ -1334,6 +1544,11 @@
ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
}
+/**
+ * ath5k_hw_update_nfcal_hist() - Update NF calibration history buffer
+ * @ah: The &struct ath5k_hw
+ * @noise_floor: The NF we got from hw
+ */
static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
{
struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
@@ -1341,7 +1556,12 @@
hist->nfval[hist->index] = noise_floor;
}
-static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_get_median_noise_floor() - Get median NF from history buffer
+ * @ah: The &struct ath5k_hw
+ */
+static s16
+ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
{
s16 sort[ATH5K_NF_CAL_HIST_MAX];
s16 tmp;
@@ -1364,18 +1584,16 @@
return sort[(ATH5K_NF_CAL_HIST_MAX - 1) / 2];
}
-/*
- * When we tell the hardware to perform a noise floor calibration
- * by setting the AR5K_PHY_AGCCTL_NF bit, it will periodically
- * sample-and-hold the minimum noise level seen at the antennas.
- * This value is then stored in a ring buffer of recently measured
- * noise floor values so we have a moving window of the last few
- * samples.
+/**
+ * ath5k_hw_update_noise_floor() - Update NF on hardware
+ * @ah: The &struct ath5k_hw
*
- * The median of the values in the history is then loaded into the
- * hardware for its own use for RSSI and CCA measurements.
+ * This is the main function we call to perform a NF calibration,
+ * it reads NF from hardware, calculates the median and updates
+ * NF on hw.
*/
-void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
+void
+ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
u32 val;
@@ -1390,6 +1608,8 @@
return;
}
+ ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
+
ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
/* completed NF calibration, test threshold */
@@ -1434,20 +1654,29 @@
ah->ah_noise_floor = nf;
+ ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
+
ATH5K_DBG(ah, ATH5K_DEBUG_CALIBRATE,
"noise floor calibrated: %d\n", nf);
}
-/*
- * Perform a PHY calibration on RF5110
- * -Fix BPSK/QAM Constellation (I/Q correction)
+/**
+ * ath5k_hw_rf5110_calibrate() - Perform a PHY calibration on RF5110
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Do a complete PHY calibration (AGC + NF + I/Q) on RF5110
*/
-static int ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
+static int
+ath5k_hw_rf5110_calibrate(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
u32 phy_sig, phy_agc, phy_sat, beacon;
int ret;
+ if (!(ah->ah_cal_mask & AR5K_CALIBRATION_FULL))
+ return 0;
+
/*
* Disable beacons and RX/TX queues, wait
*/
@@ -1456,7 +1685,7 @@
beacon = ath5k_hw_reg_read(ah, AR5K_BEACON_5210);
ath5k_hw_reg_write(ah, beacon & ~AR5K_BEACON_ENABLE, AR5K_BEACON_5210);
- mdelay(2);
+ usleep_range(2000, 2500);
/*
* Set the channel (with AGC turned off)
@@ -1469,7 +1698,7 @@
* Activate PHY and wait
*/
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
- mdelay(1);
+ usleep_range(1000, 1500);
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
@@ -1506,7 +1735,7 @@
ath5k_hw_reg_write(ah, AR5K_PHY_RFSTG_DISABLE, AR5K_PHY_RFSTG);
AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_AGC, AR5K_PHY_AGC_DISABLE);
- mdelay(1);
+ usleep_range(1000, 1500);
/*
* Enable calibration and wait until completion
@@ -1537,8 +1766,9 @@
return 0;
}
-/*
- * Perform I/Q calibration on RF5111/5112 and newer chips
+/**
+ * ath5k_hw_rf511x_iq_calibrate() - Perform I/Q calibration on RF5111 and newer
+ * @ah: The &struct ath5k_hw
*/
static int
ath5k_hw_rf511x_iq_calibrate(struct ath5k_hw *ah)
@@ -1547,12 +1777,19 @@
s32 iq_corr, i_coff, i_coffd, q_coff, q_coffd;
int i;
- if (!ah->ah_calibration ||
- ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN)
- return 0;
+ /* Skip if I/Q calibration is not needed or if it's still running */
+ if (!ah->ah_iq_cal_needed)
+ return -EINVAL;
+ else if (ath5k_hw_reg_read(ah, AR5K_PHY_IQ) & AR5K_PHY_IQ_RUN) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE,
+ "I/Q calibration still running");
+ return -EBUSY;
+ }
/* Calibration has finished, get the results and re-run */
- /* work around empty results which can apparently happen on 5212 */
+
+ /* Work around for empty results which can apparently happen on 5212:
+ * Read registers up to 10 times until we get both i_pr and q_pwr */
for (i = 0; i <= 10; i++) {
iq_corr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_CORR);
i_pwr = ath5k_hw_reg_read(ah, AR5K_PHY_IQRES_CAL_PWR_I);
@@ -1570,9 +1807,13 @@
else
q_coffd = q_pwr >> 7;
- /* protect against divide by 0 and loss of sign bits */
+ /* In case i_coffd became zero, cancel calibration
+ * not only it's too small, it'll also result a divide
+ * by zero later on. */
if (i_coffd == 0 || q_coffd < 2)
- return 0;
+ return -ECANCELED;
+
+ /* Protect against loss of sign bits */
i_coff = (-iq_corr) / i_coffd;
i_coff = clamp(i_coff, -32, 31); /* signed 6 bit */
@@ -1601,10 +1842,17 @@
return 0;
}
-/*
- * Perform a PHY calibration
+/**
+ * ath5k_hw_phy_calibrate() - Perform a PHY calibration
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * The main function we call from above to perform
+ * a short or full PHY calibration based on RF chip
+ * and current channel
*/
-int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
+int
+ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
int ret;
@@ -1613,10 +1861,43 @@
return ath5k_hw_rf5110_calibrate(ah, channel);
ret = ath5k_hw_rf511x_iq_calibrate(ah);
+ if (ret) {
+ ATH5K_DBG_UNLIMIT(ah, ATH5K_DEBUG_CALIBRATE,
+ "No I/Q correction performed (%uMHz)\n",
+ channel->center_freq);
- if ((ah->ah_radio == AR5K_RF5111 || ah->ah_radio == AR5K_RF5112) &&
- (channel->hw_value != AR5K_MODE_11B))
- ath5k_hw_request_rfgain_probe(ah);
+ /* Happens all the time if there is not much
+ * traffic, consider it normal behaviour. */
+ ret = 0;
+ }
+
+ /* On full calibration do an AGC calibration and
+ * request a PAPD probe for gainf calibration if
+ * needed */
+ if (ah->ah_cal_mask & AR5K_CALIBRATION_FULL) {
+
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL);
+
+ ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+ AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF,
+ 0, false);
+ if (ret) {
+ ATH5K_ERR(ah,
+ "gain calibration timeout (%uMHz)\n",
+ channel->center_freq);
+ }
+
+ if ((ah->ah_radio == AR5K_RF5111 ||
+ ah->ah_radio == AR5K_RF5112)
+ && (channel->hw_value != AR5K_MODE_11B))
+ ath5k_hw_request_rfgain_probe(ah);
+ }
+
+ /* Update noise floor
+ * XXX: Only do this after AGC calibration */
+ if (!(ah->ah_cal_mask & AR5K_CALIBRATION_NF))
+ ath5k_hw_update_noise_floor(ah);
return ret;
}
@@ -1626,6 +1907,16 @@
* Spur mitigation functions *
\***************************/
+/**
+ * ath5k_hw_set_spur_mitigation_filter() - Configure SPUR filter
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * This function gets called during PHY initialization to
+ * configure the spur filter for the given channel. Spur is noise
+ * generated due to "reflection" effects, for more information on this
+ * method check out patent US7643810
+ */
static void
ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
@@ -1865,15 +2156,73 @@
* Antenna control *
\*****************/
-static void /*TODO:Boundary check*/
+/**
+ * DOC: Antenna control
+ *
+ * Hw supports up to 14 antennas ! I haven't found any card that implements
+ * that. The maximum number of antennas I've seen is up to 4 (2 for 2GHz and 2
+ * for 5GHz). Antenna 1 (MAIN) should be omnidirectional, 2 (AUX)
+ * omnidirectional or sectorial and antennas 3-14 sectorial (or directional).
+ *
+ * We can have a single antenna for RX and multiple antennas for TX.
+ * RX antenna is our "default" antenna (usually antenna 1) set on
+ * DEFAULT_ANTENNA register and TX antenna is set on each TX control descriptor
+ * (0 for automatic selection, 1 - 14 antenna number).
+ *
+ * We can let hw do all the work doing fast antenna diversity for both
+ * tx and rx or we can do things manually. Here are the options we have
+ * (all are bits of STA_ID1 register):
+ *
+ * AR5K_STA_ID1_DEFAULT_ANTENNA -> When 0 is set as the TX antenna on TX
+ * control descriptor, use the default antenna to transmit or else use the last
+ * antenna on which we received an ACK.
+ *
+ * AR5K_STA_ID1_DESC_ANTENNA -> Update default antenna after each TX frame to
+ * the antenna on which we got the ACK for that frame.
+ *
+ * AR5K_STA_ID1_RTS_DEF_ANTENNA -> Use default antenna for RTS or else use the
+ * one on the TX descriptor.
+ *
+ * AR5K_STA_ID1_SELFGEN_DEF_ANT -> Use default antenna for self generated frames
+ * (ACKs etc), or else use current antenna (the one we just used for TX).
+ *
+ * Using the above we support the following scenarios:
+ *
+ * AR5K_ANTMODE_DEFAULT -> Hw handles antenna diversity etc automatically
+ *
+ * AR5K_ANTMODE_FIXED_A -> Only antenna A (MAIN) is present
+ *
+ * AR5K_ANTMODE_FIXED_B -> Only antenna B (AUX) is present
+ *
+ * AR5K_ANTMODE_SINGLE_AP -> Sta locked on a single ap
+ *
+ * AR5K_ANTMODE_SECTOR_AP -> AP with tx antenna set on tx desc
+ *
+ * AR5K_ANTMODE_SECTOR_STA -> STA with tx antenna set on tx desc
+ *
+ * AR5K_ANTMODE_DEBUG Debug mode -A -> Rx, B-> Tx-
+ *
+ * Also note that when setting antenna to F on tx descriptor card inverts
+ * current tx antenna.
+ */
+
+/**
+ * ath5k_hw_set_def_antenna() - Set default rx antenna on AR5211/5212 and newer
+ * @ah: The &struct ath5k_hw
+ * @ant: Antenna number
+ */
+static void
ath5k_hw_set_def_antenna(struct ath5k_hw *ah, u8 ant)
{
if (ah->ah_version != AR5K_AR5210)
ath5k_hw_reg_write(ah, ant & 0x7, AR5K_DEFAULT_ANTENNA);
}
-/*
- * Enable/disable fast rx antenna diversity
+/**
+ * ath5k_hw_set_fast_div() - Enable/disable fast rx antenna diversity
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @enable: True to enable, false to disable
*/
static void
ath5k_hw_set_fast_div(struct ath5k_hw *ah, u8 ee_mode, bool enable)
@@ -1913,6 +2262,14 @@
}
}
+/**
+ * ath5k_hw_set_antenna_switch() - Set up antenna switch table
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ *
+ * Switch table comes from EEPROM and includes information on controlling
+ * the 2 antenna RX attenuators
+ */
void
ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode)
{
@@ -1944,8 +2301,10 @@
AR5K_PHY_ANT_SWITCH_TABLE_1);
}
-/*
- * Set antenna operating mode
+/**
+ * ath5k_hw_set_antenna_mode() - Set antenna operating mode
+ * @ah: The &struct ath5k_hw
+ * @ant_mode: One of enum ath5k_ant_mode
*/
void
ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
@@ -2068,8 +2427,13 @@
* Helper functions
*/
-/*
- * Do linear interpolation between two given (x, y) points
+/**
+ * ath5k_get_interpolated_value() - Get interpolated Y val between two points
+ * @target: X value of the middle point
+ * @x_left: X value of the left point
+ * @x_right: X value of the right point
+ * @y_left: Y value of the left point
+ * @y_right: Y value of the right point
*/
static s16
ath5k_get_interpolated_value(s16 target, s16 x_left, s16 x_right,
@@ -2096,13 +2460,18 @@
return result;
}
-/*
- * Find vertical boundary (min pwr) for the linear PCDAC curve.
+/**
+ * ath5k_get_linear_pcdac_min() - Find vertical boundary (min pwr) for the
+ * linear PCDAC curve
+ * @stepL: Left array with y values (pcdac steps)
+ * @stepR: Right array with y values (pcdac steps)
+ * @pwrL: Left array with x values (power steps)
+ * @pwrR: Right array with x values (power steps)
*
* Since we have the top of the curve and we draw the line below
* until we reach 1 (1 pcdac step) we need to know which point
- * (x value) that is so that we don't go below y axis and have negative
- * pcdac values when creating the curve, or fill the table with zeroes.
+ * (x value) that is so that we don't go below x axis and have negative
+ * pcdac values when creating the curve, or fill the table with zeros.
*/
static s16
ath5k_get_linear_pcdac_min(const u8 *stepL, const u8 *stepR,
@@ -2148,7 +2517,16 @@
return max(min_pwrL, min_pwrR);
}
-/*
+/**
+ * ath5k_create_power_curve() - Create a Power to PDADC or PCDAC curve
+ * @pmin: Minimum power value (xmin)
+ * @pmax: Maximum power value (xmax)
+ * @pwr: Array of power steps (x values)
+ * @vpd: Array of matching PCDAC/PDADC steps (y values)
+ * @num_points: Number of provided points
+ * @vpd_table: Array to fill with the full PCDAC/PDADC values (y values)
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ *
* Interpolate (pwr,vpd) points to create a Power to PDADC or a
* Power to PCDAC curve.
*
@@ -2206,7 +2584,14 @@
}
}
-/*
+/**
+ * ath5k_get_chan_pcal_surrounding_piers() - Get surrounding calibration piers
+ * for a given channel.
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @pcinfo_l: The &struct ath5k_chan_pcal_info to put the left cal. pier
+ * @pcinfo_r: The &struct ath5k_chan_pcal_info to put the right cal. pier
+ *
* Get the surrounding per-channel power calibration piers
* for a given frequency so that we can interpolate between
* them and come up with an appropriate dataset for our current
@@ -2289,11 +2674,17 @@
*pcinfo_r = &pcinfo[idx_r];
}
-/*
+/**
+ * ath5k_get_rate_pcal_data() - Get the interpolated per-rate power
+ * calibration data
+ * @ah: The &struct ath5k_hw *ah,
+ * @channel: The &struct ieee80211_channel
+ * @rates: The &struct ath5k_rate_pcal_info to fill
+ *
* Get the surrounding per-rate power calibration data
* for a given frequency and interpolate between power
* values to set max target power supported by hw for
- * each rate.
+ * each rate on this frequency.
*/
static void
ath5k_get_rate_pcal_data(struct ath5k_hw *ah,
@@ -2381,7 +2772,11 @@
rpinfo[idx_r].target_power_54);
}
-/*
+/**
+ * ath5k_get_max_ctl_power() - Get max edge power for a given frequency
+ * @ah: the &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
* Get the max edge power for this channel if
* we have such data from EEPROM's Conformance Test
* Limits (CTL), and limit max power if needed.
@@ -2461,8 +2856,39 @@
* Power to PCDAC table functions
*/
-/*
- * Fill Power to PCDAC table on RF5111
+/**
+ * DOC: Power to PCDAC table functions
+ *
+ * For RF5111 we have an XPD -eXternal Power Detector- curve
+ * for each calibrated channel. Each curve has 0,5dB Power steps
+ * on x axis and PCDAC steps (offsets) on y axis and looks like an
+ * exponential function. To recreate the curve we read 11 points
+ * from eeprom (eeprom.c) and interpolate here.
+ *
+ * For RF5112 we have 4 XPD -eXternal Power Detector- curves
+ * for each calibrated channel on 0, -6, -12 and -18dBm but we only
+ * use the higher (3) and the lower (0) curves. Each curve again has 0.5dB
+ * power steps on x axis and PCDAC steps on y axis and looks like a
+ * linear function. To recreate the curve and pass the power values
+ * on hw, we get 4 points for xpd 0 (lower gain -> max power)
+ * and 3 points for xpd 3 (higher gain -> lower power) from eeprom (eeprom.c)
+ * and interpolate here.
+ *
+ * For a given channel we get the calibrated points (piers) for it or
+ * -if we don't have calibration data for this specific channel- from the
+ * available surrounding channels we have calibration data for, after we do a
+ * linear interpolation between them. Then since we have our calibrated points
+ * for this channel, we do again a linear interpolation between them to get the
+ * whole curve.
+ *
+ * We finally write the Y values of the curve(s) (the PCDAC values) on hw
+ */
+
+/**
+ * ath5k_fill_pwr_to_pcdac_table() - Fill Power to PCDAC table on RF5111
+ * @ah: The &struct ath5k_hw
+ * @table_min: Minimum power (x min)
+ * @table_max: Maximum power (x max)
*
* No further processing is needed for RF5111, the only thing we have to
* do is fill the values below and above calibration range since eeprom data
@@ -2503,10 +2929,14 @@
}
-/*
- * Combine available XPD Curves and fill Linear Power to PCDAC table
- * on RF5112
+/**
+ * ath5k_combine_linear_pcdac_curves() - Combine available PCDAC Curves
+ * @ah: The &struct ath5k_hw
+ * @table_min: Minimum power (x min)
+ * @table_max: Maximum power (x max)
+ * @pdcurves: Number of pd curves
*
+ * Combine available XPD Curves and fill Linear Power to PCDAC table on RF5112
* RFX112 can have up to 2 curves (one for low txpower range and one for
* higher txpower range). We need to put them both on pcdac_out and place
* them in the correct location. In case we only have one curve available
@@ -2608,7 +3038,10 @@
}
}
-/* Write PCDAC values on hw */
+/**
+ * ath5k_write_pcdac_table() - Write the PCDAC values on hw
+ * @ah: The &struct ath5k_hw
+ */
static void
ath5k_write_pcdac_table(struct ath5k_hw *ah)
{
@@ -2631,9 +3064,32 @@
* Power to PDADC table functions
*/
-/*
- * Set the gain boundaries and create final Power to PDADC table
+/**
+ * DOC: Power to PDADC table functions
*
+ * For RF2413 and later we have a Power to PDADC table (Power Detector)
+ * instead of a PCDAC (Power Control) and 4 pd gain curves for each
+ * calibrated channel. Each curve has power on x axis in 0.5 db steps and
+ * PDADC steps on y axis and looks like an exponential function like the
+ * RF5111 curve.
+ *
+ * To recreate the curves we read the points from eeprom (eeprom.c)
+ * and interpolate here. Note that in most cases only 2 (higher and lower)
+ * curves are used (like RF5112) but vendors have the opportunity to include
+ * all 4 curves on eeprom. The final curve (higher power) has an extra
+ * point for better accuracy like RF5112.
+ *
+ * The process is similar to what we do above for RF5111/5112
+ */
+
+/**
+ * ath5k_combine_pwr_to_pdadc_curves() - Combine the various PDADC curves
+ * @ah: The &struct ath5k_hw
+ * @pwr_min: Minimum power (x min)
+ * @pwr_max: Maximum power (x max)
+ * @pdcurves: Number of available curves
+ *
+ * Combine the various pd curves and create the final Power to PDADC table
* We can have up to 4 pd curves, we need to do a similar process
* as we do for RF5112. This time we don't have an edge_flag but we
* set the gain boundaries on a separate register.
@@ -2757,7 +3213,11 @@
}
-/* Write PDADC values on hw */
+/**
+ * ath5k_write_pwr_to_pdadc_table() - Write the PDADC values on hw
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ */
static void
ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode)
{
@@ -2814,7 +3274,13 @@
* Common code for PCDAC/PDADC tables
*/
-/*
+/**
+ * ath5k_setup_channel_powertable() - Set up power table for this channel
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ *
* This is the main function that uses all of the above
* to set PCDAC/PDADC table on hw for the current channel.
* This table is used for tx power calibration on the baseband,
@@ -3012,7 +3478,12 @@
return 0;
}
-/* Write power table for current channel to hw */
+/**
+ * ath5k_write_channel_powertable() - Set power table for current channel on hw
+ * @ah: The &struct ath5k_hw
+ * @ee_mode: One of enum ath5k_driver_mode
+ * @type: One of enum ath5k_powertable_type (eeprom.h)
+ */
static void
ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type)
{
@@ -3022,28 +3493,36 @@
ath5k_write_pcdac_table(ah);
}
-/*
- * Per-rate tx power setting
- *
- * This is the code that sets the desired tx power (below
- * maximum) on hw for each rate (we also have TPC that sets
- * power per packet). We do that by providing an index on the
- * PCDAC/PDADC table we set up.
- */
-/*
- * Set rate power table
+/**
+ * DOC: Per-rate tx power setting
+ *
+ * This is the code that sets the desired tx power limit (below
+ * maximum) on hw for each rate (we also have TPC that sets
+ * power per packet type). We do that by providing an index on the
+ * PCDAC/PDADC table we set up above, for each rate.
*
* For now we only limit txpower based on maximum tx power
- * supported by hw (what's inside rate_info). We need to limit
- * this even more, based on regulatory domain etc.
+ * supported by hw (what's inside rate_info) + conformance test
+ * limits. We need to limit this even more, based on regulatory domain
+ * etc to be safe. Normally this is done from above so we don't care
+ * here, all we care is that the tx power we set will be O.K.
+ * for the hw (e.g. won't create noise on PA etc).
*
- * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps)
- * and is indexed as follows:
+ * Rate power table contains indices to PCDAC/PDADC table (0.5dB steps -
+ * x values) and is indexed as follows:
* rates[0] - rates[7] -> OFDM rates
* rates[8] - rates[14] -> CCK rates
* rates[15] -> XR rates (they all have the same power)
*/
+
+/**
+ * ath5k_setup_rate_powertable() - Set up rate power table for a given tx power
+ * @ah: The &struct ath5k_hw
+ * @max_pwr: The maximum tx power requested in 0.5dB steps
+ * @rate_info: The &struct ath5k_rate_pcal_info to fill
+ * @ee_mode: One of enum ath5k_driver_mode
+ */
static void
ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
struct ath5k_rate_pcal_info *rate_info,
@@ -3114,8 +3593,14 @@
}
-/*
- * Set transmission power
+/**
+ * ath5k_hw_txpower() - Set transmission power limit for a given channel
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ * @txpower: Requested tx power in 0.5dB steps
+ *
+ * Combines all of the above to set the requested tx power limit
+ * on hw.
*/
static int
ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
@@ -3233,7 +3718,16 @@
return 0;
}
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
+/**
+ * ath5k_hw_set_txpower_limit() - Set txpower limit for the current channel
+ * @ah: The &struct ath5k_hw
+ * @txpower: The requested tx power limit in 0.5dB steps
+ *
+ * This function provides access to ath5k_hw_txpower to the driver in
+ * case user or an application changes it while PHY is running.
+ */
+int
+ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
{
ATH5K_DBG(ah, ATH5K_DEBUG_TXPOWER,
"changing txpower to %d\n", txpower);
@@ -3241,11 +3735,26 @@
return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower);
}
+
/*************\
Init function
\*************/
-int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+/**
+ * ath5k_hw_phy_init() - Initialize PHY
+ * @ah: The &struct ath5k_hw
+ * @channel: The @struct ieee80211_channel
+ * @mode: One of enum ath5k_driver_mode
+ * @fast: Try a fast channel switch instead
+ *
+ * This is the main function used during reset to initialize PHY
+ * or do a fast channel change if possible.
+ *
+ * NOTE: Do not call this one from the driver, it assumes PHY is in a
+ * warm reset state !
+ */
+int
+ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
u8 mode, bool fast)
{
struct ieee80211_channel *curr_channel;
@@ -3355,7 +3864,7 @@
if (ret)
return ret;
- mdelay(1);
+ usleep_range(1000, 1500);
/*
* Write RF buffer
@@ -3376,10 +3885,10 @@
}
} else if (ah->ah_version == AR5K_AR5210) {
- mdelay(1);
+ usleep_range(1000, 1500);
/* Disable phy and wait */
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
- mdelay(1);
+ usleep_range(1000, 1500);
}
/* Set channel on PHY */
@@ -3405,7 +3914,7 @@
for (i = 0; i <= 20; i++) {
if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
break;
- udelay(200);
+ usleep_range(200, 250);
}
ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
@@ -3433,9 +3942,9 @@
/* At the same time start I/Q calibration for QAM constellation
* -no need for CCK- */
- ah->ah_calibration = false;
+ ah->ah_iq_cal_needed = false;
if (!(mode == AR5K_MODE_11B)) {
- ah->ah_calibration = true;
+ ah->ah_iq_cal_needed = true;
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 7766542..30b50f9 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -17,23 +17,48 @@
*/
/********************************************\
-Queue Control Unit, DFS Control Unit Functions
+Queue Control Unit, DCF Control Unit Functions
\********************************************/
#include "ath5k.h"
#include "reg.h"
#include "debug.h"
+#include <linux/log2.h>
+
+/**
+ * DOC: Queue Control Unit (QCU)/DCF Control Unit (DCU) functions
+ *
+ * Here we setup parameters for the 12 available TX queues. Note that
+ * on the various registers we can usually only map the first 10 of them so
+ * basically we have 10 queues to play with. Each queue has a matching
+ * QCU that controls when the queue will get triggered and multiple QCUs
+ * can be mapped to a single DCU that controls the various DFS parameters
+ * for the various queues. In our setup we have a 1:1 mapping between QCUs
+ * and DCUs allowing us to have different DFS settings for each queue.
+ *
+ * When a frame goes into a TX queue, QCU decides when it'll trigger a
+ * transmission based on various criteria (such as how many data we have inside
+ * it's buffer or -if it's a beacon queue- if it's time to fire up the queue
+ * based on TSF etc), DCU adds backoff, IFSes etc and then a scheduler
+ * (arbitrator) decides the priority of each QCU based on it's configuration
+ * (e.g. beacons are always transmitted when they leave DCU bypassing all other
+ * frames from other queues waiting to be transmitted). After a frame leaves
+ * the DCU it goes to PCU for further processing and then to PHY for
+ * the actual transmission.
+ */
/******************\
* Helper functions *
\******************/
-/*
- * Get number of pending frames
- * for a specific queue [5211+]
+/**
+ * ath5k_hw_num_tx_pending() - Get number of pending frames for a given queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
*/
-u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
+u32
+ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
{
u32 pending;
AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
@@ -58,10 +83,13 @@
return pending;
}
-/*
- * Set a transmit queue inactive
+/**
+ * ath5k_hw_release_tx_queue() - Set a transmit queue inactive
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
*/
-void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+void
+ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
{
if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
return;
@@ -72,34 +100,56 @@
AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
}
-/*
+/**
+ * ath5k_cw_validate() - Make sure the given cw is valid
+ * @cw_req: The contention window value to check
+ *
* Make sure cw is a power of 2 minus 1 and smaller than 1024
*/
-static u16 ath5k_cw_validate(u16 cw_req)
+static u16
+ath5k_cw_validate(u16 cw_req)
{
- u32 cw = 1;
cw_req = min(cw_req, (u16)1023);
- while (cw < cw_req)
- cw = (cw << 1) | 1;
+ /* Check if cw_req + 1 a power of 2 */
+ if (is_power_of_2(cw_req + 1))
+ return cw_req;
- return cw;
+ /* Check if cw_req is a power of 2 */
+ if (is_power_of_2(cw_req))
+ return cw_req - 1;
+
+ /* If none of the above is correct
+ * find the closest power of 2 */
+ cw_req = (u16) roundup_pow_of_two(cw_req) - 1;
+
+ return cw_req;
}
-/*
- * Get properties for a transmit queue
+/**
+ * ath5k_hw_get_tx_queueprops() - Get properties for a transmit queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ * @queue_info: The &struct ath5k_txq_info to fill
*/
-int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+int
+ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
struct ath5k_txq_info *queue_info)
{
memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
return 0;
}
-/*
- * Set properties for a transmit queue
+/**
+ * ath5k_hw_set_tx_queueprops() - Set properties for a transmit queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ * @qinfo: The &struct ath5k_txq_info to use
+ *
+ * Returns 0 on success or -EIO if queue is inactive
*/
-int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+int
+ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
const struct ath5k_txq_info *qinfo)
{
struct ath5k_txq_info *qi;
@@ -139,10 +189,16 @@
return 0;
}
-/*
- * Initialize a transmit queue
+/**
+ * ath5k_hw_setup_tx_queue() - Initialize a transmit queue
+ * @ah: The &struct ath5k_hw
+ * @queue_type: One of enum ath5k_tx_queue
+ * @queue_info: The &struct ath5k_txq_info to use
+ *
+ * Returns 0 on success, -EINVAL on invalid arguments
*/
-int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
+int
+ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
struct ath5k_txq_info *queue_info)
{
unsigned int queue;
@@ -217,10 +273,16 @@
* Single QCU/DCU initialization *
\*******************************/
-/*
- * Set tx retry limits on DCU
+/**
+ * ath5k_hw_set_tx_retry_limits() - Set tx retry limits on DCU
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
+ *
+ * This function is used when initializing a queue, to set
+ * retry limits based on ah->ah_retry_* and the chipset used.
*/
-void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
+void
+ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
unsigned int queue)
{
/* Single data queue on AR5210 */
@@ -255,15 +317,15 @@
}
/**
- * ath5k_hw_reset_tx_queue - Initialize a single hw queue
+ * ath5k_hw_reset_tx_queue() - Initialize a single hw queue
+ * @ah: The &struct ath5k_hw
+ * @queue: One of enum ath5k_tx_queue_id
*
- * @ah The &struct ath5k_hw
- * @queue The hw queue number
- *
- * Set DFS properties for the given transmit queue on DCU
+ * Set DCF properties for the given transmit queue on DCU
* and configures all queue-specific parameters.
*/
-int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+int
+ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
{
struct ath5k_txq_info *tq = &ah->ah_txq[queue];
@@ -491,10 +553,9 @@
\**************************/
/**
- * ath5k_hw_set_ifs_intervals - Set global inter-frame spaces on DCU
- *
- * @ah The &struct ath5k_hw
- * @slot_time Slot time in us
+ * ath5k_hw_set_ifs_intervals() - Set global inter-frame spaces on DCU
+ * @ah: The &struct ath5k_hw
+ * @slot_time: Slot time in us
*
* Sets the global IFS intervals on DCU (also works on AR5210) for
* the given slot time and the current bwmode.
@@ -597,7 +658,15 @@
}
-int ath5k_hw_init_queues(struct ath5k_hw *ah)
+/**
+ * ath5k_hw_init_queues() - Initialize tx queues
+ * @ah: The &struct ath5k_hw
+ *
+ * Initializes all tx queues based on information on
+ * ah->ah_txq* set by the driver
+ */
+int
+ath5k_hw_init_queues(struct ath5k_hw *ah)
{
int i, ret;
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index f5c1000..0ea1608 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -280,6 +280,10 @@
* 5211/5212 we have one primary and 4 secondary registers.
* So we have AR5K_ISR for 5210 and AR5K_PISR /SISRx for 5211/5212.
* Most of these bits are common for all chipsets.
+ *
+ * NOTE: On 5211+ TXOK, TXDESC, TXERR, TXEOL and TXURN contain
+ * the logical OR from per-queue interrupt bits found on SISR registers
+ * (see below).
*/
#define AR5K_ISR 0x001c /* Register Address [5210] */
#define AR5K_PISR 0x0080 /* Register Address [5211+] */
@@ -292,7 +296,10 @@
#define AR5K_ISR_TXOK 0x00000040 /* Frame successfully transmitted */
#define AR5K_ISR_TXDESC 0x00000080 /* TX descriptor request */
#define AR5K_ISR_TXERR 0x00000100 /* Transmit error */
-#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout) */
+#define AR5K_ISR_TXNOFRM 0x00000200 /* No frame transmitted (transmit timeout)
+ * NOTE: We don't have per-queue info for this
+ * one, but we can enable it per-queue through
+ * TXNOFRM_QCU field on TXNOFRM register */
#define AR5K_ISR_TXEOL 0x00000400 /* Empty TX descriptor */
#define AR5K_ISR_TXURN 0x00000800 /* Transmit FIFO underrun */
#define AR5K_ISR_MIB 0x00001000 /* Update MIB counters */
@@ -302,21 +309,29 @@
#define AR5K_ISR_SWBA 0x00010000 /* Software beacon alert */
#define AR5K_ISR_BRSSI 0x00020000 /* Beacon rssi below threshold (?) */
#define AR5K_ISR_BMISS 0x00040000 /* Beacon missed */
-#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+] */
+#define AR5K_ISR_HIUERR 0x00080000 /* Host Interface Unit error [5211+]
+ * 'or' of MCABT, SSERR, DPERR from SISR2 */
#define AR5K_ISR_BNR 0x00100000 /* Beacon not ready [5211+] */
#define AR5K_ISR_MCABT 0x00100000 /* Master Cycle Abort [5210] */
#define AR5K_ISR_RXCHIRP 0x00200000 /* CHIRP Received [5212+] */
#define AR5K_ISR_SSERR 0x00200000 /* Signaled System Error [5210] */
-#define AR5K_ISR_DPERR 0x00400000 /* Det par Error (?) [5210] */
+#define AR5K_ISR_DPERR 0x00400000 /* Bus parity error [5210] */
#define AR5K_ISR_RXDOPPLER 0x00400000 /* Doppler chirp received [5212+] */
#define AR5K_ISR_TIM 0x00800000 /* [5211+] */
-#define AR5K_ISR_BCNMISC 0x00800000 /* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
- CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_BCNMISC 0x00800000 /* Misc beacon related interrupt
+ * 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+ * CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
#define AR5K_ISR_GPIO 0x01000000 /* GPIO (rf kill) */
#define AR5K_ISR_QCBRORN 0x02000000 /* QCU CBR overrun [5211+] */
#define AR5K_ISR_QCBRURN 0x04000000 /* QCU CBR underrun [5211+] */
#define AR5K_ISR_QTRIG 0x08000000 /* QCU scheduling trigger [5211+] */
+#define AR5K_ISR_BITS_FROM_SISRS (AR5K_ISR_TXOK | AR5K_ISR_TXDESC |\
+ AR5K_ISR_TXERR | AR5K_ISR_TXEOL |\
+ AR5K_ISR_TXURN | AR5K_ISR_HIUERR |\
+ AR5K_ISR_BCNMISC | AR5K_ISR_QCBRORN |\
+ AR5K_ISR_QCBRURN | AR5K_ISR_QTRIG)
+
/*
* Secondary status registers [5211+] (0 - 4)
*
@@ -347,7 +362,7 @@
#define AR5K_SISR2_BCN_TIMEOUT 0x08000000 /* Beacon Timeout [5212+] */
#define AR5K_SISR2_CAB_TIMEOUT 0x10000000 /* CAB Timeout [5212+] */
#define AR5K_SISR2_DTIM 0x20000000 /* [5212+] */
-#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF OOR (?) */
+#define AR5K_SISR2_TSFOOR 0x80000000 /* TSF Out of range */
#define AR5K_SISR3 0x0090 /* Register Address [5211+] */
#define AR5K_SISR3_QCBRORN 0x000003ff /* Mask for QCBRORN */
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 2abac25..4aed3a3 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -19,9 +19,9 @@
*
*/
-/*****************************\
- Reset functions and helpers
-\*****************************/
+/****************************\
+ Reset function and helpers
+\****************************/
#include <asm/unaligned.h>
@@ -33,14 +33,36 @@
#include "debug.h"
+/**
+ * DOC: Reset function and helpers
+ *
+ * Here we implement the main reset routine, used to bring the card
+ * to a working state and ready to receive. We also handle routines
+ * that don't fit on other places such as clock, sleep and power control
+ */
+
+
/******************\
* Helper functions *
\******************/
-/*
- * Check if a register write has been completed
+/**
+ * ath5k_hw_register_timeout() - Poll a register for a flag/field change
+ * @ah: The &struct ath5k_hw
+ * @reg: The register to read
+ * @flag: The flag/field to check on the register
+ * @val: The field value we expect (if we check a field)
+ * @is_set: Instead of checking if the flag got cleared, check if it got set
+ *
+ * Some registers contain flags that indicate that an operation is
+ * running. We use this function to poll these registers and check
+ * if these flags get cleared. We also use it to poll a register
+ * field (containing multiple flags) until it gets a specific value.
+ *
+ * Returns -EAGAIN if we exceeded AR5K_TUNE_REGISTER_TIMEOUT * 15us or 0
*/
-int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
+int
+ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
bool is_set)
{
int i;
@@ -64,35 +86,48 @@
\*************************/
/**
- * ath5k_hw_htoclock - Translate usec to hw clock units
- *
+ * ath5k_hw_htoclock() - Translate usec to hw clock units
* @ah: The &struct ath5k_hw
* @usec: value in microseconds
+ *
+ * Translate usecs to hw clock units based on the current
+ * hw clock rate.
+ *
+ * Returns number of clock units
*/
-unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
+unsigned int
+ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
{
struct ath_common *common = ath5k_hw_common(ah);
return usec * common->clockrate;
}
/**
- * ath5k_hw_clocktoh - Translate hw clock units to usec
+ * ath5k_hw_clocktoh() - Translate hw clock units to usec
+ * @ah: The &struct ath5k_hw
* @clock: value in hw clock units
+ *
+ * Translate hw clock units to usecs based on the current
+ * hw clock rate.
+ *
+ * Returns number of usecs
*/
-unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
+unsigned int
+ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
{
struct ath_common *common = ath5k_hw_common(ah);
return clock / common->clockrate;
}
/**
- * ath5k_hw_init_core_clock - Initialize core clock
+ * ath5k_hw_init_core_clock() - Initialize core clock
+ * @ah: The &struct ath5k_hw
*
- * @ah The &struct ath5k_hw
- *
- * Initialize core clock parameters (usec, usec32, latencies etc).
+ * Initialize core clock parameters (usec, usec32, latencies etc),
+ * based on current bwmode and chipset properties.
*/
-static void ath5k_hw_init_core_clock(struct ath5k_hw *ah)
+static void
+ath5k_hw_init_core_clock(struct ath5k_hw *ah)
{
struct ieee80211_channel *channel = ah->ah_current_channel;
struct ath_common *common = ath5k_hw_common(ah);
@@ -227,16 +262,21 @@
}
}
-/*
+/**
+ * ath5k_hw_set_sleep_clock() - Setup sleep clock operation
+ * @ah: The &struct ath5k_hw
+ * @enable: Enable sleep clock operation (false to disable)
+ *
* If there is an external 32KHz crystal available, use it
* as ref. clock instead of 32/40MHz clock and baseband clocks
* to save power during sleep or restore normal 32/40MHz
* operation.
*
- * XXX: When operating on 32KHz certain PHY registers (27 - 31,
- * 123 - 127) require delay on access.
+ * NOTE: When operating on 32KHz certain PHY registers (27 - 31,
+ * 123 - 127) require delay on access.
*/
-static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
+static void
+ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
u32 scal, spending, sclock;
@@ -340,10 +380,19 @@
* Reset/Sleep control *
\*********************/
-/*
- * Reset chipset
+/**
+ * ath5k_hw_nic_reset() - Reset the various chipset units
+ * @ah: The &struct ath5k_hw
+ * @val: Mask to indicate what units to reset
+ *
+ * To reset the various chipset units we need to write
+ * the mask to AR5K_RESET_CTL and poll the register until
+ * all flags are cleared.
+ *
+ * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout)
*/
-static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+static int
+ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
{
int ret;
u32 mask = val ? val : ~0U;
@@ -357,7 +406,7 @@
ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
/* Wait at least 128 PCI clocks */
- udelay(15);
+ usleep_range(15, 20);
if (ah->ah_version == AR5K_AR5210) {
val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA
@@ -382,12 +431,17 @@
return ret;
}
-/*
- * Reset AHB chipset
- * AR5K_RESET_CTL_PCU flag resets WMAC
- * AR5K_RESET_CTL_BASEBAND flag resets WBB
+/**
+ * ath5k_hw_wisoc_reset() - Reset AHB chipset
+ * @ah: The &struct ath5k_hw
+ * @flags: Mask to indicate what units to reset
+ *
+ * Same as ath5k_hw_nic_reset but for AHB based devices
+ *
+ * Returns 0 if we are O.K. or -EAGAIN (from athk5_hw_register_timeout)
*/
-static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
+static int
+ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
{
u32 mask = flags ? flags : ~0U;
u32 __iomem *reg;
@@ -422,7 +476,7 @@
regval = __raw_readl(reg);
__raw_writel(regval | val, reg);
regval = __raw_readl(reg);
- udelay(100);
+ usleep_range(100, 150);
/* Bring BB/MAC out of reset */
__raw_writel(regval & ~val, reg);
@@ -439,11 +493,23 @@
return 0;
}
-
-/*
- * Sleep control
+/**
+ * ath5k_hw_set_power_mode() - Set power mode
+ * @ah: The &struct ath5k_hw
+ * @mode: One of enum ath5k_power_mode
+ * @set_chip: Set to true to write sleep control register
+ * @sleep_duration: How much time the device is allowed to sleep
+ * when sleep logic is enabled (in 128 microsecond increments).
+ *
+ * This function is used to configure sleep policy and allowed
+ * sleep modes. For more information check out the sleep control
+ * register on reg.h and STA_ID1.
+ *
+ * Returns 0 on success, -EIO if chip didn't wake up or -EINVAL if an invalid
+ * mode is requested.
*/
-static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+static int
+ath5k_hw_set_power_mode(struct ath5k_hw *ah, enum ath5k_power_mode mode,
bool set_chip, u16 sleep_duration)
{
unsigned int i;
@@ -493,7 +559,7 @@
ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
AR5K_SLEEP_CTL);
- udelay(15);
+ usleep_range(15, 20);
for (i = 200; i > 0; i--) {
/* Check if the chip did wake up */
@@ -502,7 +568,7 @@
break;
/* Wait a bit and retry */
- udelay(50);
+ usleep_range(50, 75);
ath5k_hw_reg_write(ah, data | AR5K_SLEEP_CTL_SLE_WAKE,
AR5K_SLEEP_CTL);
}
@@ -523,17 +589,20 @@
return 0;
}
-/*
- * Put device on hold
+/**
+ * ath5k_hw_on_hold() - Put device on hold
+ * @ah: The &struct ath5k_hw
*
- * Put MAC and Baseband on warm reset and
- * keep that state (don't clean sleep control
- * register). After this MAC and Baseband are
- * disabled and a full reset is needed to come
- * back. This way we save as much power as possible
+ * Put MAC and Baseband on warm reset and keep that state
+ * (don't clean sleep control register). After this MAC
+ * and Baseband are disabled and a full reset is needed
+ * to come back. This way we save as much power as possible
* without putting the card on full sleep.
+ *
+ * Returns 0 on success or -EIO on error
*/
-int ath5k_hw_on_hold(struct ath5k_hw *ah)
+int
+ath5k_hw_on_hold(struct ath5k_hw *ah)
{
struct pci_dev *pdev = ah->pdev;
u32 bus_flags;
@@ -543,7 +612,7 @@
return 0;
/* Make sure device is awake */
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n");
return ret;
@@ -563,7 +632,7 @@
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
- mdelay(2);
+ usleep_range(2000, 2500);
} else {
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_BASEBAND | bus_flags);
@@ -575,7 +644,7 @@
}
/* ...wakeup again!*/
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
ATH5K_ERR(ah, "failed to put device on hold\n");
return ret;
@@ -584,11 +653,18 @@
return ret;
}
-/*
+/**
+ * ath5k_hw_nic_wakeup() - Force card out of sleep
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
* Bring up MAC + PHY Chips and program PLL
- * Channel is NULL for the initial wakeup.
+ * NOTE: Channel is NULL for the initial wakeup.
+ *
+ * Returns 0 on success, -EIO on hw failure or -EINVAL for false channel infos
*/
-int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+int
+ath5k_hw_nic_wakeup(struct ath5k_hw *ah, struct ieee80211_channel *channel)
{
struct pci_dev *pdev = ah->pdev;
u32 turbo, mode, clock, bus_flags;
@@ -600,7 +676,7 @@
if ((ath5k_get_bus_type(ah) != ATH_AHB) || channel) {
/* Wakeup the device */
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
ATH5K_ERR(ah, "failed to wakeup the MAC Chip\n");
return ret;
@@ -621,7 +697,7 @@
ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_DMA |
AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
- mdelay(2);
+ usleep_range(2000, 2500);
} else {
if (ath5k_get_bus_type(ah) == ATH_AHB)
ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU |
@@ -637,7 +713,7 @@
}
/* ...wakeup again!...*/
- ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+ ret = ath5k_hw_set_power_mode(ah, AR5K_PM_AWAKE, true, 0);
if (ret) {
ATH5K_ERR(ah, "failed to resume the MAC Chip\n");
return ret;
@@ -739,7 +815,7 @@
/* ...update PLL if needed */
if (ath5k_hw_reg_read(ah, AR5K_PHY_PLL) != clock) {
ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
- udelay(300);
+ usleep_range(300, 350);
}
/* ...set the PHY operating mode */
@@ -755,8 +831,19 @@
* Post-initvals register modifications *
\**************************************/
-/* TODO: Half/Quarter rate */
-static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
+/**
+ * ath5k_hw_tweak_initval_settings() - Tweak initial settings
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Some settings are not handled on initvals, e.g. bwmode
+ * settings, some phy settings, workarounds etc that in general
+ * don't fit anywhere else or are too small to introduce a separate
+ * function for each one. So we have this function to handle
+ * them all during reset and complete card's initialization.
+ */
+static void
+ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
if (ah->ah_version == AR5K_AR5212 &&
@@ -875,7 +962,16 @@
}
}
-static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
+/**
+ * ath5k_hw_commit_eeprom_settings() - Commit settings from EEPROM
+ * @ah: The &struct ath5k_hw
+ * @channel: The &struct ieee80211_channel
+ *
+ * Use settings stored on EEPROM to properly initialize the card
+ * based on various infos and per-mode calibration data.
+ */
+static void
+ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
struct ieee80211_channel *channel)
{
struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
@@ -1029,7 +1125,23 @@
* Main reset function *
\*********************/
-int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+/**
+ * ath5k_hw_reset() - The main reset function
+ * @ah: The &struct ath5k_hw
+ * @op_mode: One of enum nl80211_iftype
+ * @channel: The &struct ieee80211_channel
+ * @fast: Enable fast channel switching
+ * @skip_pcu: Skip pcu initialization
+ *
+ * This is the function we call each time we want to (re)initialize the
+ * card and pass new settings to hw. We also call it when hw runs into
+ * trouble to make it come back to a working state.
+ *
+ * Returns 0 on success, -EINVAL on false op_mode or channel infos, or -EIO
+ * on failure.
+ */
+int
+ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
struct ieee80211_channel *channel, bool fast, bool skip_pcu)
{
u32 s_seq[10], s_led[3], tsf_up, tsf_lo;
@@ -1242,7 +1354,7 @@
/*
* Initialize PCU
*/
- ath5k_hw_pcu_init(ah, op_mode, mode);
+ ath5k_hw_pcu_init(ah, op_mode);
/*
* Initialize PHY
diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
index 5d11c23..aed34d9 100644
--- a/drivers/net/wireless/ath/ath5k/rfbuffer.h
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
@@ -18,7 +18,9 @@
*/
-/*
+/**
+ * DOC: RF Buffer registers
+ *
* There are some special registers on the RF chip
* that control various operation settings related mostly to
* the analog parts (channel, gain adjustment etc).
@@ -44,40 +46,63 @@
*/
-/*
+/**
+ * struct ath5k_ini_rfbuffer - Initial RF Buffer settings
+ * @rfb_bank: RF Bank number
+ * @rfb_ctrl_register: RF Buffer control register
+ * @rfb_mode_data: RF Buffer data for each mode
+ *
* Struct to hold default mode specific RF
- * register values (RF Banks)
+ * register values (RF Banks) for each chip.
*/
struct ath5k_ini_rfbuffer {
- u8 rfb_bank; /* RF Bank number */
- u16 rfb_ctrl_register; /* RF Buffer control register */
- u32 rfb_mode_data[3]; /* RF Buffer data for each mode */
+ u8 rfb_bank;
+ u16 rfb_ctrl_register;
+ u32 rfb_mode_data[3];
};
-/*
+/**
+ * struct ath5k_rfb_field - An RF Buffer field (register/value)
+ * @len: Field length
+ * @pos: Offset on the raw packet
+ * @col: Used for shifting
+ *
* Struct to hold RF Buffer field
* infos used to access certain RF
* analog registers
*/
struct ath5k_rfb_field {
- u8 len; /* Field length */
- u16 pos; /* Offset on the raw packet */
- u8 col; /* Column -used for shifting */
+ u8 len;
+ u16 pos;
+ u8 col;
};
-/*
- * RF analog register definition
+/**
+ * struct ath5k_rf_reg - RF analog register definition
+ * @bank: RF Buffer Bank number
+ * @index: Register's index on ath5k_rf_regx_idx
+ * @field: The &struct ath5k_rfb_field
+ *
+ * We use this struct to define the set of RF registers
+ * on each chip that we want to tweak. Some RF registers
+ * are common between different chip versions so this saves
+ * us space and complexity because we can refer to an rf
+ * register by it's index no matter what chip we work with
+ * as long as it has that register.
*/
struct ath5k_rf_reg {
- u8 bank; /* RF Buffer Bank number */
- u8 index; /* Register's index on rf_regs_idx */
- struct ath5k_rfb_field field; /* RF Buffer field for this register */
+ u8 bank;
+ u8 index;
+ struct ath5k_rfb_field field;
};
-/* Map RF registers to indexes
+/**
+ * enum ath5k_rf_regs_idx - Map RF registers to indexes
+ *
* We do this to handle common bits and make our
* life easier by using an index for each register
- * instead of a full rfb_field */
+ * instead of a full rfb_field
+ */
enum ath5k_rf_regs_idx {
/* BANK 2 */
AR5K_RF_TURBO = 0,
diff --git a/drivers/net/wireless/ath/ath5k/rfgain.h b/drivers/net/wireless/ath/ath5k/rfgain.h
index ebfae05..4d21df0 100644
--- a/drivers/net/wireless/ath/ath5k/rfgain.h
+++ b/drivers/net/wireless/ath/ath5k/rfgain.h
@@ -18,13 +18,17 @@
*
*/
-/*
+/**
+ * struct ath5k_ini_rfgain - RF Gain table
+ * @rfg_register: RF Gain register address
+ * @rfg_value: Register value for 5 and 2GHz
+ *
* Mode-specific RF Gain table (64bytes) for RF5111/5112
* (RF5110 only comes with AR5210 and only supports a/turbo a mode so initial
* RF Gain values are included in AR5K_AR5210_INI)
*/
struct ath5k_ini_rfgain {
- u16 rfg_register; /* RF Gain register address */
+ u16 rfg_register;
u32 rfg_value[2]; /* [freq (see below)] */
};
@@ -455,18 +459,31 @@
#define AR5K_GAIN_CHECK_ADJUST(_g) \
((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
+/**
+ * struct ath5k_gain_opt_step - An RF gain optimization step
+ * @gos_param: Set of parameters
+ * @gos_gain: Gain
+ */
struct ath5k_gain_opt_step {
s8 gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
s8 gos_gain;
};
+/**
+ * struct ath5k_gain_opt - RF Gain optimization ladder
+ * @go_default: The default step
+ * @go_steps_count: How many optimization steps
+ * @go_step: Array of &struct ath5k_gain_opt_step
+ */
struct ath5k_gain_opt {
u8 go_default;
u8 go_steps_count;
const struct ath5k_gain_opt_step go_step[AR5K_GAIN_STEP_COUNT];
};
+
/*
+ * RF5111
* Parameters on gos_param:
* 1) Tx clip PHY register
* 2) PWD 90 RF register
@@ -490,6 +507,7 @@
};
/*
+ * RF5112
* Parameters on gos_param:
* 1) Mixgain ovr RF register
* 2) PWD 138 RF register
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index abe3af3..6c59a21 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -14,6 +14,8 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/moduleparam.h>
+
#include "core.h"
#include "cfg80211.h"
#include "debug.h"
diff --git a/drivers/net/wireless/ath/ath6kl/debug.c b/drivers/net/wireless/ath/ath6kl/debug.c
index cf513a8..eb808b4 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.c
+++ b/drivers/net/wireless/ath/ath6kl/debug.c
@@ -19,6 +19,7 @@
#include <linux/circ_buf.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include "debug.h"
#include "target.h"
diff --git a/drivers/net/wireless/ath/ath6kl/debug.h b/drivers/net/wireless/ath/ath6kl/debug.h
index 9b779aa..e569c65 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.h
+++ b/drivers/net/wireless/ath/ath6kl/debug.h
@@ -46,8 +46,8 @@
};
extern unsigned int debug_mask;
-extern int ath6kl_printk(const char *level, const char *fmt, ...)
- __attribute__ ((format (printf, 2, 3)));
+extern __printf(2, 3)
+int ath6kl_printk(const char *level, const char *fmt, ...);
#define ath6kl_info(fmt, ...) \
ath6kl_printk(KERN_INFO, fmt, ##__VA_ARGS__)
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index c614049..368ecbd 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1663,6 +1663,7 @@
ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
WIPHY_FLAG_HAVE_AP_SME |
+ WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL |
WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
if (test_bit(ATH6KL_FW_CAPABILITY_SCHED_SCAN, ar->fw_capabilities))
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 07903e6..15c3f56 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -14,6 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/module.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/host.h>
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index 7b4c074..1b4786a 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -2,6 +2,9 @@
tristate
config ATH9K_COMMON
tristate
+config ATH9K_DFS_DEBUGFS
+ def_bool y
+ depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
config ATH9K
tristate "Atheros 802.11n wireless cards support"
@@ -51,6 +54,25 @@
Also required for changing debug message flags at run time.
+config ATH9K_DFS_CERTIFIED
+ bool "Atheros DFS support for certified platforms"
+ depends on ATH9K && EXPERT
+ default n
+ ---help---
+ This option enables DFS support for initiating radiation on
+ ath9k. There is no way to dynamically detect if a card was DFS
+ certified and as such this is left as a build time option. This
+ option should only be enabled by system integrators that can
+ guarantee that all the platforms that their kernel will run on
+ have obtained appropriate regulatory body certification for a
+ respective Atheros card by using ath9k on the target shipping
+ platforms.
+
+ This is currently only a placeholder for future DFS support,
+ as DFS support requires more components that still need to be
+ developed. At this point enabling this option won't do anything
+ except increase code size.
+
config ATH9K_RATE_CONTROL
bool "Atheros ath9k rate control"
depends on ATH9K
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index 49d3f25..da02242 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -10,6 +10,8 @@
ath9k-$(CONFIG_ATH9K_PCI) += pci.o
ath9k-$(CONFIG_ATH9K_AHB) += ahb.o
ath9k-$(CONFIG_ATH9K_DEBUGFS) += debug.o
+ath9k-$(CONFIG_ATH9K_DFS_DEBUGFS) += dfs_debug.o
+ath9k-$(CONFIG_ATH9K_DFS_CERTIFIED) += dfs.o
obj-$(CONFIG_ATH9K) += ath9k.o
@@ -34,7 +36,8 @@
ar9002_mac.o \
ar9003_mac.o \
ar9003_eeprom.o \
- ar9003_paprd.o
+ ar9003_paprd.o \
+ ar9003_mci.o
obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 85a54cd..5e47ca6 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -19,6 +19,7 @@
#include <linux/nl80211.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
+#include <linux/module.h>
#include "ath9k.h"
static const struct platform_device_id ath9k_platform_id_table[] = {
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 2776c3c..a639b94 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -15,6 +15,7 @@
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include "hw.h"
#include "hw-ops.h"
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 88279e3..157337f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -203,7 +203,7 @@
i);
ath_dbg(common, ATH_DBG_CALIBRATE,
- "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+ "Original: Chn %d iq_corr_meas = 0x%08x\n",
i, ah->totalIqCorrMeas[i]);
iqCorrNeg = 0;
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index 626d547..11f192a 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -14,6 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/moduleparam.h>
#include "hw.h"
#include "ar5008_initvals.h"
#include "ar9001_initvals.h"
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index f7d8e51..b592016 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -15,6 +15,7 @@
*/
#include "hw.h"
+#include <linux/export.h>
#define AR_BufLen 0x00000fff
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 12a730d..23b3a6c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -18,6 +18,7 @@
#include "hw-ops.h"
#include "ar9003_phy.h"
#include "ar9003_rtt.h"
+#include "ar9003_mci.h"
#define MAX_MEASUREMENT MAX_IQCAL_MEASUREMENT
#define MAX_MAG_DELTA 11
@@ -225,7 +226,7 @@
i);
ath_dbg(common, ATH_DBG_CALIBRATE,
- "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+ "Original: Chn %d iq_corr_meas = 0x%08x\n",
i, ah->totalIqCorrMeas[i]);
iqCorrNeg = 0;
@@ -824,7 +825,7 @@
chan_info_tab[i] + offset);
ath_dbg(common, ATH_DBG_CALIBRATE,
- "IQ RES[%d]=0x%x"
+ "IQ_RES[%d]=0x%x "
"IQ_RES[%d]=0x%x\n",
idx, iq_res[idx], idx + 1,
iq_res[idx + 1]);
@@ -934,10 +935,12 @@
{
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_cal_data *caldata = ah->caldata;
+ struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
bool txiqcal_done = false, txclcal_done = false;
bool is_reusable = true, status = true;
bool run_rtt_cal = false, run_agc_cal;
bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT);
+ bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL |
AR_PHY_AGC_CONTROL_FLTR_CAL |
AR_PHY_AGC_CONTROL_PKDET_CAL;
@@ -1005,6 +1008,31 @@
} else if (caldata && !caldata->done_txiqcal_once)
run_agc_cal = true;
+ if (mci && IS_CHAN_2GHZ(chan) &&
+ (mci_hw->bt_state == MCI_BT_AWAKE) &&
+ run_agc_cal &&
+ !(mci_hw->config & ATH_MCI_CONFIG_DISABLE_MCI_CAL)) {
+
+ u32 pld[4] = {0, 0, 0, 0};
+
+ /* send CAL_REQ only when BT is AWAKE. */
+ ath_dbg(common, ATH_DBG_MCI, "MCI send WLAN_CAL_REQ 0x%x\n",
+ mci_hw->wlan_cal_seq);
+ MCI_GPM_SET_CAL_TYPE(pld, MCI_GPM_WLAN_CAL_REQ);
+ pld[MCI_GPM_WLAN_CAL_W_SEQUENCE] = mci_hw->wlan_cal_seq++;
+ ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16, true, false);
+
+ /* Wait BT_CAL_GRANT for 50ms */
+ ath_dbg(common, ATH_DBG_MCI, "MCI wait for BT_CAL_GRANT");
+
+ if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_GRANT, 0, 50000))
+ ath_dbg(common, ATH_DBG_MCI, "MCI got BT_CAL_GRANT");
+ else {
+ is_reusable = false;
+ ath_dbg(common, ATH_DBG_MCI, "\nMCI BT is not responding");
+ }
+ }
+
txiqcal_done = ar9003_hw_tx_iq_cal_run(ah);
REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
udelay(5);
@@ -1022,6 +1050,21 @@
AR_PHY_AGC_CONTROL_CAL,
0, AH_WAIT_TIMEOUT);
}
+
+ if (mci && IS_CHAN_2GHZ(chan) &&
+ (mci_hw->bt_state == MCI_BT_AWAKE) &&
+ run_agc_cal &&
+ !(mci_hw->config & ATH_MCI_CONFIG_DISABLE_MCI_CAL)) {
+
+ u32 pld[4] = {0, 0, 0, 0};
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send WLAN_CAL_DONE 0x%x\n",
+ mci_hw->wlan_cal_done);
+ MCI_GPM_SET_CAL_TYPE(pld, MCI_GPM_WLAN_CAL_DONE);
+ pld[MCI_GPM_WLAN_CAL_W_SEQUENCE] = mci_hw->wlan_cal_done++;
+ ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16, true, false);
+ }
+
if (rtt && !run_rtt_cal) {
agc_ctrl |= agc_supp_cals;
REG_WRITE(ah, AR_PHY_AGC_CONTROL, agc_ctrl);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index a93bd63..4ba6f52 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4779,7 +4779,7 @@
{
struct ath_common *common = ath9k_hw_common(ah);
struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep;
- u16 twiceMaxEdgePower = MAX_RATE_POWER;
+ u16 twiceMaxEdgePower;
int i;
u16 scaledPower = 0, minCtlPower;
static const u16 ctlModesFor11a[] = {
@@ -4880,6 +4880,7 @@
ctlNum = AR9300_NUM_CTLS_5G;
}
+ twiceMaxEdgePower = MAX_RATE_POWER;
for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) {
ath_dbg(common, ATH_DBG_REGULATORY,
"LOOP-Ctlidx %d: cfgCtl 0x%2.2x pCtlMode 0x%2.2x ctlIndex 0x%2.2x chan %d\n",
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index b363cc0..631fe4f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -13,6 +13,7 @@
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
#include "ar9003_mac.h"
@@ -174,20 +175,24 @@
u32 isr = 0;
u32 mask2 = 0;
struct ath9k_hw_capabilities *pCap = &ah->caps;
- u32 sync_cause = 0;
struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 sync_cause = 0, async_cause;
- if (REG_READ(ah, AR_INTR_ASYNC_CAUSE) & AR_INTR_MAC_IRQ) {
+ async_cause = REG_READ(ah, AR_INTR_ASYNC_CAUSE);
+
+ if (async_cause & (AR_INTR_MAC_IRQ | AR_INTR_ASYNC_MASK_MCI)) {
if ((REG_READ(ah, AR_RTC_STATUS) & AR_RTC_STATUS_M)
== AR_RTC_STATUS_ON)
isr = REG_READ(ah, AR_ISR);
}
+
sync_cause = REG_READ(ah, AR_INTR_SYNC_CAUSE) & AR_INTR_SYNC_DEFAULT;
*masked = 0;
- if (!isr && !sync_cause)
+ if (!isr && !sync_cause && !async_cause)
return false;
if (isr) {
@@ -293,6 +298,35 @@
ar9003_hw_bb_watchdog_read(ah);
}
+ if (async_cause & AR_INTR_ASYNC_MASK_MCI) {
+ u32 raw_intr, rx_msg_intr;
+
+ rx_msg_intr = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW);
+ raw_intr = REG_READ(ah, AR_MCI_INTERRUPT_RAW);
+
+ if ((raw_intr == 0xdeadbeef) || (rx_msg_intr == 0xdeadbeef))
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI gets 0xdeadbeef during MCI int processing"
+ "new raw_intr=0x%08x, new rx_msg_raw=0x%08x, "
+ "raw_intr=0x%08x, rx_msg_raw=0x%08x\n",
+ raw_intr, rx_msg_intr, mci->raw_intr,
+ mci->rx_msg_intr);
+ else {
+ mci->rx_msg_intr |= rx_msg_intr;
+ mci->raw_intr |= raw_intr;
+ *masked |= ATH9K_INT_MCI;
+
+ if (rx_msg_intr & AR_MCI_INTERRUPT_RX_MSG_CONT_INFO)
+ mci->cont_status =
+ REG_READ(ah, AR_MCI_CONT_STATUS);
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW, rx_msg_intr);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW, raw_intr);
+ ath_dbg(common, ATH_DBG_MCI, "AR_INTR_SYNC_MCI\n");
+
+ }
+ }
+
if (sync_cause) {
if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
new file mode 100644
index 0000000..8599822
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c
@@ -0,0 +1,1464 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/export.h>
+#include "hw.h"
+#include "ar9003_phy.h"
+#include "ar9003_mci.h"
+
+static void ar9003_mci_reset_req_wakeup(struct ath_hw *ah)
+{
+ if (!AR_SREV_9462_20(ah))
+ return;
+
+ REG_RMW_FIELD(ah, AR_MCI_COMMAND2,
+ AR_MCI_COMMAND2_RESET_REQ_WAKEUP, 1);
+ udelay(1);
+ REG_RMW_FIELD(ah, AR_MCI_COMMAND2,
+ AR_MCI_COMMAND2_RESET_REQ_WAKEUP, 0);
+}
+
+static int ar9003_mci_wait_for_interrupt(struct ath_hw *ah, u32 address,
+ u32 bit_position, int time_out)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ while (time_out) {
+
+ if (REG_READ(ah, address) & bit_position) {
+
+ REG_WRITE(ah, address, bit_position);
+
+ if (address == AR_MCI_INTERRUPT_RX_MSG_RAW) {
+
+ if (bit_position &
+ AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
+ ar9003_mci_reset_req_wakeup(ah);
+
+ if (bit_position &
+ (AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING |
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING))
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_RX_MSG);
+ }
+ break;
+ }
+
+ udelay(10);
+ time_out -= 10;
+
+ if (time_out < 0)
+ break;
+ }
+
+ if (time_out <= 0) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Wait for Reg 0x%08x = 0x%08x timeout.\n",
+ address, bit_position);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI INT_RAW = 0x%08x, RX_MSG_RAW = 0x%08x",
+ REG_READ(ah, AR_MCI_INTERRUPT_RAW),
+ REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW));
+ time_out = 0;
+ }
+
+ return time_out;
+}
+
+void ar9003_mci_remote_reset(struct ath_hw *ah, bool wait_done)
+{
+ u32 payload[4] = { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffff00};
+
+ ar9003_mci_send_message(ah, MCI_REMOTE_RESET, 0, payload, 16,
+ wait_done, false);
+ udelay(5);
+}
+
+void ar9003_mci_send_lna_transfer(struct ath_hw *ah, bool wait_done)
+{
+ u32 payload = 0x00000000;
+
+ ar9003_mci_send_message(ah, MCI_LNA_TRANS, 0, &payload, 1,
+ wait_done, false);
+}
+
+static void ar9003_mci_send_req_wake(struct ath_hw *ah, bool wait_done)
+{
+ ar9003_mci_send_message(ah, MCI_REQ_WAKE, MCI_FLAG_DISABLE_TIMESTAMP,
+ NULL, 0, wait_done, false);
+ udelay(5);
+}
+
+void ar9003_mci_send_sys_waking(struct ath_hw *ah, bool wait_done)
+{
+ ar9003_mci_send_message(ah, MCI_SYS_WAKING, MCI_FLAG_DISABLE_TIMESTAMP,
+ NULL, 0, wait_done, false);
+}
+
+static void ar9003_mci_send_lna_take(struct ath_hw *ah, bool wait_done)
+{
+ u32 payload = 0x70000000;
+
+ ar9003_mci_send_message(ah, MCI_LNA_TAKE, 0, &payload, 1,
+ wait_done, false);
+}
+
+static void ar9003_mci_send_sys_sleeping(struct ath_hw *ah, bool wait_done)
+{
+ ar9003_mci_send_message(ah, MCI_SYS_SLEEPING,
+ MCI_FLAG_DISABLE_TIMESTAMP,
+ NULL, 0, wait_done, false);
+}
+
+static void ar9003_mci_send_coex_version_query(struct ath_hw *ah,
+ bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+
+ if (!mci->bt_version_known &&
+ (mci->bt_state != MCI_BT_SLEEP)) {
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send Coex version query\n");
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_VERSION_QUERY);
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ wait_done, true);
+ }
+}
+
+static void ar9003_mci_send_coex_version_response(struct ath_hw *ah,
+ bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send Coex version response\n");
+ MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
+ MCI_GPM_COEX_VERSION_RESPONSE);
+ *(((u8 *)payload) + MCI_GPM_COEX_B_MAJOR_VERSION) =
+ mci->wlan_ver_major;
+ *(((u8 *)payload) + MCI_GPM_COEX_B_MINOR_VERSION) =
+ mci->wlan_ver_minor;
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
+}
+
+static void ar9003_mci_send_coex_wlan_channels(struct ath_hw *ah,
+ bool wait_done)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 *payload = &mci->wlan_channels[0];
+
+ if ((mci->wlan_channels_update == true) &&
+ (mci->bt_state != MCI_BT_SLEEP)) {
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_WLAN_CHANNELS);
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ wait_done, true);
+ MCI_GPM_SET_TYPE_OPCODE(payload, 0xff, 0xff);
+ }
+}
+
+static void ar9003_mci_send_coex_bt_status_query(struct ath_hw *ah,
+ bool wait_done, u8 query_type)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+ bool query_btinfo = !!(query_type & (MCI_GPM_COEX_QUERY_BT_ALL_INFO |
+ MCI_GPM_COEX_QUERY_BT_TOPOLOGY));
+
+ if (mci->bt_state != MCI_BT_SLEEP) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Send Coex BT Status Query 0x%02X\n", query_type);
+
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_STATUS_QUERY);
+
+ *(((u8 *)payload) + MCI_GPM_COEX_B_BT_BITMAP) = query_type;
+ /*
+ * If bt_status_query message is not sent successfully,
+ * then need_flush_btinfo should be set again.
+ */
+ if (!ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ wait_done, true)) {
+ if (query_btinfo) {
+ mci->need_flush_btinfo = true;
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI send bt_status_query fail, "
+ "set flush flag again\n");
+ }
+ }
+
+ if (query_btinfo)
+ mci->query_bt = false;
+ }
+}
+
+void ar9003_mci_send_coex_halt_bt_gpm(struct ath_hw *ah, bool halt,
+ bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 payload[4] = {0, 0, 0, 0};
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send Coex %s BT GPM.\n",
+ (halt) ? "halt" : "unhalt");
+
+ MCI_GPM_SET_TYPE_OPCODE(payload,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_HALT_BT_GPM);
+
+ if (halt) {
+ mci->query_bt = true;
+ /* Send next unhalt no matter halt sent or not */
+ mci->unhalt_bt_gpm = true;
+ mci->need_flush_btinfo = true;
+ *(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) =
+ MCI_GPM_COEX_BT_GPM_HALT;
+ } else
+ *(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) =
+ MCI_GPM_COEX_BT_GPM_UNHALT;
+
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
+}
+
+
+static void ar9003_mci_prep_interface(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 saved_mci_int_en;
+ u32 mci_timeout = 150;
+
+ mci->bt_state = MCI_BT_SLEEP;
+ saved_mci_int_en = REG_READ(ah, AR_MCI_INTERRUPT_EN);
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW));
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ REG_READ(ah, AR_MCI_INTERRUPT_RAW));
+
+ /* Remote Reset */
+ ath_dbg(common, ATH_DBG_MCI, "MCI Reset sequence start\n");
+ ath_dbg(common, ATH_DBG_MCI, "MCI send REMOTE_RESET\n");
+ ar9003_mci_remote_reset(ah, true);
+
+ /*
+ * This delay is required for the reset delay worst case value 255 in
+ * MCI_COMMAND2 register
+ */
+
+ if (AR_SREV_9462_10(ah))
+ udelay(252);
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send REQ_WAKE to remoter(BT)\n");
+ ar9003_mci_send_req_wake(ah, true);
+
+ if (ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING, 500)) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI SYS_WAKING from remote(BT)\n");
+ mci->bt_state = MCI_BT_AWAKE;
+
+ if (AR_SREV_9462_10(ah))
+ udelay(10);
+ /*
+ * we don't need to send more remote_reset at this moment.
+ * If BT receive first remote_reset, then BT HW will
+ * be cleaned up and will be able to receive req_wake
+ * and BT HW will respond sys_waking.
+ * In this case, WLAN will receive BT's HW sys_waking.
+ * Otherwise, if BT SW missed initial remote_reset,
+ * that remote_reset will still clean up BT MCI RX,
+ * and the req_wake will wake BT up,
+ * and BT SW will respond this req_wake with a remote_reset and
+ * sys_waking. In this case, WLAN will receive BT's SW
+ * sys_waking. In either case, BT's RX is cleaned up. So we
+ * don't need to reply BT's remote_reset now, if any.
+ * Similarly, if in any case, WLAN can receive BT's sys_waking,
+ * that means WLAN's RX is also fine.
+ */
+
+ /* Send SYS_WAKING to BT */
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI send SW SYS_WAKING to remote BT\n");
+
+ ar9003_mci_send_sys_waking(ah, true);
+ udelay(10);
+
+ /*
+ * Set BT priority interrupt value to be 0xff to
+ * avoid having too many BT PRIORITY interrupts.
+ */
+
+ REG_WRITE(ah, AR_MCI_BT_PRI0, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI1, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI2, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI3, 0xFFFFFFFF);
+ REG_WRITE(ah, AR_MCI_BT_PRI, 0X000000FF);
+
+ /*
+ * A contention reset will be received after send out
+ * sys_waking. Also BT priority interrupt bits will be set.
+ * Clear those bits before the next step.
+ */
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_CONT_RST);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_BT_PRI);
+
+ if (AR_SREV_9462_10(ah) || mci->is_2g) {
+ /* Send LNA_TRANS */
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI send LNA_TRANS to BT\n");
+ ar9003_mci_send_lna_transfer(ah, true);
+ udelay(5);
+ }
+
+ if (AR_SREV_9462_10(ah) || (mci->is_2g &&
+ !mci->update_2g5g)) {
+ if (ar9003_mci_wait_for_interrupt(ah,
+ AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_LNA_INFO,
+ mci_timeout))
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI WLAN has control over the LNA & "
+ "BT obeys it\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT didn't respond to"
+ "LNA_TRANS\n");
+ }
+
+ if (AR_SREV_9462_10(ah)) {
+ /* Send another remote_reset to deassert BT clk_req. */
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI another remote_reset to "
+ "deassert clk_req\n");
+ ar9003_mci_remote_reset(ah, true);
+ udelay(252);
+ }
+ }
+
+ /* Clear the extra redundant SYS_WAKING from BT */
+ if ((mci->bt_state == MCI_BT_AWAKE) &&
+ (REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING)) &&
+ (REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING) == 0)) {
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
+ }
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, saved_mci_int_en);
+}
+
+void ar9003_mci_disable_interrupt(struct ath_hw *ah)
+{
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, 0);
+}
+
+void ar9003_mci_enable_interrupt(struct ath_hw *ah)
+{
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, AR_MCI_INTERRUPT_DEFAULT);
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN,
+ AR_MCI_INTERRUPT_RX_MSG_DEFAULT);
+}
+
+bool ar9003_mci_check_int(struct ath_hw *ah, u32 ints)
+{
+ u32 intr;
+
+ intr = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW);
+ return ((intr & ints) == ints);
+}
+
+void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
+ u32 *rx_msg_intr)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ *raw_intr = mci->raw_intr;
+ *rx_msg_intr = mci->rx_msg_intr;
+
+ /* Clean int bits after the values are read. */
+ mci->raw_intr = 0;
+ mci->rx_msg_intr = 0;
+}
+EXPORT_SYMBOL(ar9003_mci_get_interrupt);
+
+void ar9003_mci_2g5g_changed(struct ath_hw *ah, bool is_2g)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+
+ if (!mci->update_2g5g &&
+ (mci->is_2g != is_2g))
+ mci->update_2g5g = true;
+
+ mci->is_2g = is_2g;
+}
+
+static bool ar9003_mci_is_gpm_valid(struct ath_hw *ah, u32 msg_index)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 *payload;
+ u32 recv_type, offset;
+
+ if (msg_index == MCI_GPM_INVALID)
+ return false;
+
+ offset = msg_index << 4;
+
+ payload = (u32 *)(mci->gpm_buf + offset);
+ recv_type = MCI_GPM_TYPE(payload);
+
+ if (recv_type == MCI_GPM_RSVD_PATTERN) {
+ ath_dbg(common, ATH_DBG_MCI, "MCI Skip RSVD GPM\n");
+ return false;
+ }
+
+ return true;
+}
+
+static void ar9003_mci_observation_set_up(struct ath_hw *ah)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ if (mci->config & ATH_MCI_CONFIG_MCI_OBS_MCI) {
+
+ ath9k_hw_cfg_output(ah, 3,
+ AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_DATA);
+ ath9k_hw_cfg_output(ah, 2, AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_CLK);
+ ath9k_hw_cfg_output(ah, 1, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
+ ath9k_hw_cfg_output(ah, 0, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
+
+ } else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_TXRX) {
+
+ ath9k_hw_cfg_output(ah, 3, AR_GPIO_OUTPUT_MUX_AS_WL_IN_TX);
+ ath9k_hw_cfg_output(ah, 2, AR_GPIO_OUTPUT_MUX_AS_WL_IN_RX);
+ ath9k_hw_cfg_output(ah, 1, AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
+ ath9k_hw_cfg_output(ah, 0, AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
+ ath9k_hw_cfg_output(ah, 5, AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+
+ } else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_BT) {
+
+ ath9k_hw_cfg_output(ah, 3, AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
+ ath9k_hw_cfg_output(ah, 2, AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
+ ath9k_hw_cfg_output(ah, 1, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
+ ath9k_hw_cfg_output(ah, 0, AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
+
+ } else
+ return;
+
+ REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
+
+ if (AR_SREV_9462_20_OR_LATER(ah)) {
+ REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
+ AR_GLB_DS_JTAG_DISABLE, 1);
+ REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
+ AR_GLB_WLAN_UART_INTF_EN, 0);
+ REG_SET_BIT(ah, AR_GLB_GPIO_CONTROL,
+ ATH_MCI_CONFIG_MCI_OBS_GPIO);
+ }
+
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_GPIO_OBS_SEL, 0);
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL, 1);
+ REG_WRITE(ah, AR_OBS, 0x4b);
+ REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL1, 0x03);
+ REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL2, 0x01);
+ REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_LSB, 0x02);
+ REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_MSB, 0x03);
+ REG_RMW_FIELD(ah, AR_PHY_TEST_CTL_STATUS,
+ AR_PHY_TEST_CTL_DEBUGPORT_SEL, 0x07);
+}
+
+static bool ar9003_mci_send_coex_bt_flags(struct ath_hw *ah, bool wait_done,
+ u8 opcode, u32 bt_flags)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 pld[4] = {0, 0, 0, 0};
+
+ MCI_GPM_SET_TYPE_OPCODE(pld,
+ MCI_GPM_COEX_AGENT, MCI_GPM_COEX_BT_UPDATE_FLAGS);
+
+ *(((u8 *)pld) + MCI_GPM_COEX_B_BT_FLAGS_OP) = opcode;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 0) = bt_flags & 0xFF;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 1) = (bt_flags >> 8) & 0xFF;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 2) = (bt_flags >> 16) & 0xFF;
+ *(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 3) = (bt_flags >> 24) & 0xFF;
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: Send Coex BT Update Flags %s 0x%08x\n",
+ (opcode == MCI_GPM_COEX_BT_FLAGS_READ) ? "READ" :
+ ((opcode == MCI_GPM_COEX_BT_FLAGS_SET) ? "SET" : "CLEAR"),
+ bt_flags);
+
+ return ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16,
+ wait_done, true);
+}
+
+void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
+ bool is_full_sleep)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 regval, thresh;
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI full_sleep = %d, is_2g = %d\n",
+ is_full_sleep, is_2g);
+
+ /*
+ * GPM buffer and scheduling message buffer are not allocated
+ */
+
+ if (!mci->gpm_addr && !mci->sched_addr) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM and schedule buffers are not allocated");
+ return;
+ }
+
+ if (REG_READ(ah, AR_BTCOEX_CTRL) == 0xdeadbeef) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI it's deadbeef, quit mci_reset\n");
+ return;
+ }
+
+ /* Program MCI DMA related registers */
+ REG_WRITE(ah, AR_MCI_GPM_0, mci->gpm_addr);
+ REG_WRITE(ah, AR_MCI_GPM_1, mci->gpm_len);
+ REG_WRITE(ah, AR_MCI_SCHD_TABLE_0, mci->sched_addr);
+
+ /*
+ * To avoid MCI state machine be affected by incoming remote MCI msgs,
+ * MCI mode will be enabled later, right before reset the MCI TX and RX.
+ */
+
+ regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
+ SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
+ SM(1, AR_BTCOEX_CTRL_PA_SHARED) |
+ SM(1, AR_BTCOEX_CTRL_LNA_SHARED) |
+ SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
+ SM(3, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
+ SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
+ SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+
+ if (is_2g && (AR_SREV_9462_20(ah)) &&
+ !(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA)) {
+
+ regval |= SM(1, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI sched one step look ahead\n");
+
+ if (!(mci->config &
+ ATH_MCI_CONFIG_DISABLE_AGGR_THRESH)) {
+
+ thresh = MS(mci->config,
+ ATH_MCI_CONFIG_AGGR_THRESH);
+ thresh &= 7;
+ regval |= SM(1,
+ AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN);
+ regval |= SM(thresh, AR_BTCOEX_CTRL_AGGR_THRESH);
+
+ REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
+ AR_MCI_SCHD_TABLE_2_HW_BASED, 1);
+ REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
+ AR_MCI_SCHD_TABLE_2_MEM_BASED, 1);
+
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI sched aggr thresh: off\n");
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI SCHED one step look ahead off\n");
+
+ if (AR_SREV_9462_10(ah))
+ regval |= SM(1, AR_BTCOEX_CTRL_SPDT_ENABLE_10);
+
+ REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
+
+ if (AR_SREV_9462_20(ah)) {
+ REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
+ AR_BTCOEX_CTRL_SPDT_ENABLE);
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL3,
+ AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT, 20);
+ }
+
+ REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_RX_DEWEIGHT, 1);
+ REG_RMW_FIELD(ah, AR_PCU_MISC, AR_PCU_BT_ANT_PREVENT_RX, 0);
+
+ thresh = MS(mci->config, ATH_MCI_CONFIG_CLK_DIV);
+ REG_RMW_FIELD(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_CLK_DIV, thresh);
+ REG_SET_BIT(ah, AR_BTCOEX_CTRL, AR_BTCOEX_CTRL_MCI_MODE_EN);
+
+ /* Resetting the Rx and Tx paths of MCI */
+ regval = REG_READ(ah, AR_MCI_COMMAND2);
+ regval |= SM(1, AR_MCI_COMMAND2_RESET_TX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+
+ udelay(1);
+
+ regval &= ~SM(1, AR_MCI_COMMAND2_RESET_TX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+
+ if (is_full_sleep) {
+ ar9003_mci_mute_bt(ah);
+ udelay(100);
+ }
+
+ regval |= SM(1, AR_MCI_COMMAND2_RESET_RX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+ udelay(1);
+ regval &= ~SM(1, AR_MCI_COMMAND2_RESET_RX);
+ REG_WRITE(ah, AR_MCI_COMMAND2, regval);
+
+ ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET, NULL);
+ REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE,
+ (SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
+ SM(0x0000, AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM)));
+
+ REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ if (AR_SREV_9462_20_OR_LATER(ah))
+ ar9003_mci_observation_set_up(ah);
+
+ mci->ready = true;
+ ar9003_mci_prep_interface(ah);
+
+ if (en_int)
+ ar9003_mci_enable_interrupt(ah);
+}
+
+void ar9003_mci_mute_bt(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ /* disable all MCI messages */
+ REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE, 0xffff0000);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS0, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS1, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS2, 0xffffffff);
+ REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS3, 0xffffffff);
+ REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ /* wait pending HW messages to flush out */
+ udelay(10);
+
+ /*
+ * Send LNA_TAKE and SYS_SLEEPING when
+ * 1. reset not after resuming from full sleep
+ * 2. before reset MCI RX, to quiet BT and avoid MCI RX misalignment
+ */
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send LNA take\n");
+ ar9003_mci_send_lna_take(ah, true);
+
+ udelay(5);
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send sys sleeping\n");
+ ar9003_mci_send_sys_sleeping(ah, true);
+}
+
+void ar9003_mci_sync_bt_state(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 cur_bt_state;
+
+ cur_bt_state = ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP, NULL);
+
+ if (mci->bt_state != cur_bt_state) {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT state mismatches. old: %d, new: %d\n",
+ mci->bt_state, cur_bt_state);
+ mci->bt_state = cur_bt_state;
+ }
+
+ if (mci->bt_state != MCI_BT_SLEEP) {
+
+ ar9003_mci_send_coex_version_query(ah, true);
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+
+ if (mci->unhalt_bt_gpm == true) {
+ ath_dbg(common, ATH_DBG_MCI, "MCI unhalt BT GPM");
+ ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
+ }
+ }
+}
+
+static void ar9003_mci_send_2g5g_status(struct ath_hw *ah, bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 new_flags, to_set, to_clear;
+
+ if (AR_SREV_9462_20(ah) &&
+ mci->update_2g5g &&
+ (mci->bt_state != MCI_BT_SLEEP)) {
+
+ if (mci->is_2g) {
+ new_flags = MCI_2G_FLAGS;
+ to_clear = MCI_2G_FLAGS_CLEAR_MASK;
+ to_set = MCI_2G_FLAGS_SET_MASK;
+ } else {
+ new_flags = MCI_5G_FLAGS;
+ to_clear = MCI_5G_FLAGS_CLEAR_MASK;
+ to_set = MCI_5G_FLAGS_SET_MASK;
+ }
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: %s 0x%08x clr=0x%08x, set=0x%08x\n",
+ mci->is_2g ? "2G" : "5G", new_flags, to_clear, to_set);
+
+ if (to_clear)
+ ar9003_mci_send_coex_bt_flags(ah, wait_done,
+ MCI_GPM_COEX_BT_FLAGS_CLEAR, to_clear);
+
+ if (to_set)
+ ar9003_mci_send_coex_bt_flags(ah, wait_done,
+ MCI_GPM_COEX_BT_FLAGS_SET, to_set);
+ }
+
+ if (AR_SREV_9462_10(ah) && (mci->bt_state != MCI_BT_SLEEP))
+ mci->update_2g5g = false;
+}
+
+static void ar9003_mci_queue_unsent_gpm(struct ath_hw *ah, u8 header,
+ u32 *payload, bool queue)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u8 type, opcode;
+
+ if (queue) {
+
+ if (payload)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI ERROR: Send fail: %02x: %02x %02x %02x\n",
+ header,
+ *(((u8 *)payload) + 4),
+ *(((u8 *)payload) + 5),
+ *(((u8 *)payload) + 6));
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI ERROR: Send fail: %02x\n", header);
+ }
+
+ /* check if the message is to be queued */
+ if (header != MCI_GPM)
+ return;
+
+ type = MCI_GPM_TYPE(payload);
+ opcode = MCI_GPM_OPCODE(payload);
+
+ if (type != MCI_GPM_COEX_AGENT)
+ return;
+
+ switch (opcode) {
+ case MCI_GPM_COEX_BT_UPDATE_FLAGS:
+
+ if (AR_SREV_9462_10(ah))
+ break;
+
+ if (*(((u8 *)payload) + MCI_GPM_COEX_B_BT_FLAGS_OP) ==
+ MCI_GPM_COEX_BT_FLAGS_READ)
+ break;
+
+ mci->update_2g5g = queue;
+
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: 2G5G status <queued> %s.\n",
+ mci->is_2g ? "2G" : "5G");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT_MCI_FLAGS: 2G5G status <sent> %s.\n",
+ mci->is_2g ? "2G" : "5G");
+
+ break;
+
+ case MCI_GPM_COEX_WLAN_CHANNELS:
+
+ mci->wlan_channels_update = queue;
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI WLAN channel map <queued>\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI WLAN channel map <sent>\n");
+ break;
+
+ case MCI_GPM_COEX_HALT_BT_GPM:
+
+ if (*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) ==
+ MCI_GPM_COEX_BT_GPM_UNHALT) {
+
+ mci->unhalt_bt_gpm = queue;
+
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI UNHALT BT GPM <queued>\n");
+ else {
+ mci->halted_bt_gpm = false;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI UNHALT BT GPM <sent>\n");
+ }
+ }
+
+ if (*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) ==
+ MCI_GPM_COEX_BT_GPM_HALT) {
+
+ mci->halted_bt_gpm = !queue;
+
+ if (queue)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI HALT BT GPM <not sent>\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI UNHALT BT GPM <sent>\n");
+ }
+
+ break;
+ default:
+ break;
+ }
+}
+
+void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+
+ if (mci->update_2g5g) {
+ if (mci->is_2g) {
+
+ ar9003_mci_send_2g5g_status(ah, true);
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send LNA trans\n");
+ ar9003_mci_send_lna_transfer(ah, true);
+ udelay(5);
+
+ REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ if (AR_SREV_9462_20(ah)) {
+ REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
+ AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+ if (!(mci->config &
+ ATH_MCI_CONFIG_DISABLE_OSLA)) {
+ REG_SET_BIT(ah, AR_BTCOEX_CTRL,
+ AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+ }
+ }
+ } else {
+ ath_dbg(common, ATH_DBG_MCI, "MCI Send LNA take\n");
+ ar9003_mci_send_lna_take(ah, true);
+ udelay(5);
+
+ REG_SET_BIT(ah, AR_MCI_TX_CTRL,
+ AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
+
+ if (AR_SREV_9462_20(ah)) {
+ REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
+ AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
+ REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
+ AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
+ }
+
+ ar9003_mci_send_2g5g_status(ah, true);
+ }
+ }
+}
+
+bool ar9003_mci_send_message(struct ath_hw *ah, u8 header, u32 flag,
+ u32 *payload, u8 len, bool wait_done,
+ bool check_bt)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ bool msg_sent = false;
+ u32 regval;
+ u32 saved_mci_int_en;
+ int i;
+
+ saved_mci_int_en = REG_READ(ah, AR_MCI_INTERRUPT_EN);
+ regval = REG_READ(ah, AR_BTCOEX_CTRL);
+
+ if ((regval == 0xdeadbeef) || !(regval & AR_BTCOEX_CTRL_MCI_MODE_EN)) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Not sending 0x%x. MCI is not enabled. "
+ "full_sleep = %d\n", header,
+ (ah->power_mode == ATH9K_PM_FULL_SLEEP) ? 1 : 0);
+
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
+ return false;
+
+ } else if (check_bt && (mci->bt_state == MCI_BT_SLEEP)) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Don't send message 0x%x. BT is in sleep state\n", header);
+
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
+ return false;
+ }
+
+ if (wait_done)
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
+
+ /* Need to clear SW_MSG_DONE raw bit before wait */
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
+ (AR_MCI_INTERRUPT_SW_MSG_DONE |
+ AR_MCI_INTERRUPT_MSG_FAIL_MASK));
+
+ if (payload) {
+ for (i = 0; (i * 4) < len; i++)
+ REG_WRITE(ah, (AR_MCI_TX_PAYLOAD0 + i * 4),
+ *(payload + i));
+ }
+
+ REG_WRITE(ah, AR_MCI_COMMAND0,
+ (SM((flag & MCI_FLAG_DISABLE_TIMESTAMP),
+ AR_MCI_COMMAND0_DISABLE_TIMESTAMP) |
+ SM(len, AR_MCI_COMMAND0_LEN) |
+ SM(header, AR_MCI_COMMAND0_HEADER)));
+
+ if (wait_done &&
+ !(ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RAW,
+ AR_MCI_INTERRUPT_SW_MSG_DONE, 500)))
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
+ else {
+ ar9003_mci_queue_unsent_gpm(ah, header, payload, false);
+ msg_sent = true;
+ }
+
+ if (wait_done)
+ REG_WRITE(ah, AR_MCI_INTERRUPT_EN, saved_mci_int_en);
+
+ return msg_sent;
+}
+EXPORT_SYMBOL(ar9003_mci_send_message);
+
+void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
+ u16 len, u32 sched_addr)
+{
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ void *sched_buf = (void *)((char *) gpm_buf + (sched_addr - gpm_addr));
+
+ mci->gpm_addr = gpm_addr;
+ mci->gpm_buf = gpm_buf;
+ mci->gpm_len = len;
+ mci->sched_addr = sched_addr;
+ mci->sched_buf = sched_buf;
+
+ ar9003_mci_reset(ah, true, true, true);
+}
+EXPORT_SYMBOL(ar9003_mci_setup);
+
+void ar9003_mci_cleanup(struct ath_hw *ah)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ /* Turn off MCI and Jupiter mode. */
+ REG_WRITE(ah, AR_BTCOEX_CTRL, 0x00);
+ ath_dbg(common, ATH_DBG_MCI, "MCI ar9003_mci_cleanup\n");
+ ar9003_mci_disable_interrupt(ah);
+}
+EXPORT_SYMBOL(ar9003_mci_cleanup);
+
+static void ar9003_mci_process_gpm_extra(struct ath_hw *ah, u8 gpm_type,
+ u8 gpm_opcode, u32 *p_gpm)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u8 *p_data = (u8 *) p_gpm;
+
+ if (gpm_type != MCI_GPM_COEX_AGENT)
+ return;
+
+ switch (gpm_opcode) {
+ case MCI_GPM_COEX_VERSION_QUERY:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Version Query\n");
+ ar9003_mci_send_coex_version_response(ah, true);
+ break;
+ case MCI_GPM_COEX_VERSION_RESPONSE:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Version Response\n");
+ mci->bt_ver_major =
+ *(p_data + MCI_GPM_COEX_B_MAJOR_VERSION);
+ mci->bt_ver_minor =
+ *(p_data + MCI_GPM_COEX_B_MINOR_VERSION);
+ mci->bt_version_known = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT Coex version: %d.%d\n",
+ mci->bt_ver_major,
+ mci->bt_ver_minor);
+ break;
+ case MCI_GPM_COEX_STATUS_QUERY:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Status Query = 0x%02X.\n",
+ *(p_data + MCI_GPM_COEX_B_WLAN_BITMAP));
+ mci->wlan_channels_update = true;
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+ break;
+ case MCI_GPM_COEX_BT_PROFILE_INFO:
+ mci->query_bt = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX BT_Profile_Info\n");
+ break;
+ case MCI_GPM_COEX_BT_STATUS_UPDATE:
+ mci->query_bt = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX BT_Status_Update "
+ "SEQ=%d (drop&query)\n", *(p_gpm + 3));
+ break;
+ default:
+ break;
+ }
+}
+
+u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
+ u8 gpm_opcode, int time_out)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 *p_gpm = NULL, mismatch = 0, more_data;
+ u32 offset;
+ u8 recv_type = 0, recv_opcode = 0;
+ bool b_is_bt_cal_done = (gpm_type == MCI_GPM_BT_CAL_DONE);
+
+ more_data = time_out ? MCI_GPM_NOMORE : MCI_GPM_MORE;
+
+ while (time_out > 0) {
+ if (p_gpm) {
+ MCI_GPM_RECYCLE(p_gpm);
+ p_gpm = NULL;
+ }
+
+ if (more_data != MCI_GPM_MORE)
+ time_out = ar9003_mci_wait_for_interrupt(ah,
+ AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_GPM,
+ time_out);
+
+ if (!time_out)
+ break;
+
+ offset = ar9003_mci_state(ah,
+ MCI_STATE_NEXT_GPM_OFFSET, &more_data);
+
+ if (offset == MCI_GPM_INVALID)
+ continue;
+
+ p_gpm = (u32 *) (mci->gpm_buf + offset);
+ recv_type = MCI_GPM_TYPE(p_gpm);
+ recv_opcode = MCI_GPM_OPCODE(p_gpm);
+
+ if (MCI_GPM_IS_CAL_TYPE(recv_type)) {
+
+ if (recv_type == gpm_type) {
+
+ if ((gpm_type == MCI_GPM_BT_CAL_DONE) &&
+ !b_is_bt_cal_done) {
+ gpm_type = MCI_GPM_BT_CAL_GRANT;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv BT_CAL_DONE"
+ "wait BT_CAL_GRANT\n");
+ continue;
+ }
+
+ break;
+ }
+ } else if ((recv_type == gpm_type) &&
+ (recv_opcode == gpm_opcode))
+ break;
+
+ /* not expected message */
+
+ /*
+ * check if it's cal_grant
+ *
+ * When we're waiting for cal_grant in reset routine,
+ * it's possible that BT sends out cal_request at the
+ * same time. Since BT's calibration doesn't happen
+ * that often, we'll let BT completes calibration then
+ * we continue to wait for cal_grant from BT.
+ * Orginal: Wait BT_CAL_GRANT.
+ * New: Receive BT_CAL_REQ -> send WLAN_CAL_GRANT->wait
+ * BT_CAL_DONE -> Wait BT_CAL_GRANT.
+ */
+
+ if ((gpm_type == MCI_GPM_BT_CAL_GRANT) &&
+ (recv_type == MCI_GPM_BT_CAL_REQ)) {
+
+ u32 payload[4] = {0, 0, 0, 0};
+
+ gpm_type = MCI_GPM_BT_CAL_DONE;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Rcv BT_CAL_REQ, send WLAN_CAL_GRANT\n");
+
+ MCI_GPM_SET_CAL_TYPE(payload,
+ MCI_GPM_WLAN_CAL_GRANT);
+
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
+ false, false);
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI now wait for BT_CAL_DONE\n");
+
+ continue;
+ } else {
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM subtype"
+ "not match 0x%x\n", *(p_gpm + 1));
+ mismatch++;
+ ar9003_mci_process_gpm_extra(ah, recv_type,
+ recv_opcode, p_gpm);
+ }
+ }
+ if (p_gpm) {
+ MCI_GPM_RECYCLE(p_gpm);
+ p_gpm = NULL;
+ }
+
+ if (time_out <= 0) {
+ time_out = 0;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM received timeout, mismatch = %d\n", mismatch);
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Receive GPM type=0x%x, code=0x%x\n",
+ gpm_type, gpm_opcode);
+
+ while (more_data == MCI_GPM_MORE) {
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI discard remaining GPM\n");
+ offset = ar9003_mci_state(ah, MCI_STATE_NEXT_GPM_OFFSET,
+ &more_data);
+
+ if (offset == MCI_GPM_INVALID)
+ break;
+
+ p_gpm = (u32 *) (mci->gpm_buf + offset);
+ recv_type = MCI_GPM_TYPE(p_gpm);
+ recv_opcode = MCI_GPM_OPCODE(p_gpm);
+
+ if (!MCI_GPM_IS_CAL_TYPE(recv_type))
+ ar9003_mci_process_gpm_extra(ah, recv_type,
+ recv_opcode, p_gpm);
+
+ MCI_GPM_RECYCLE(p_gpm);
+ }
+
+ return time_out;
+}
+
+u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data)
+{
+ struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
+ u32 value = 0, more_gpm = 0, gpm_ptr;
+ u8 query_type;
+
+ switch (state_type) {
+ case MCI_STATE_ENABLE:
+ if (mci->ready) {
+
+ value = REG_READ(ah, AR_BTCOEX_CTRL);
+
+ if ((value == 0xdeadbeef) || (value == 0xffffffff))
+ value = 0;
+ }
+ value &= AR_BTCOEX_CTRL_MCI_MODE_EN;
+ break;
+ case MCI_STATE_INIT_GPM_OFFSET:
+ value = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM initial WRITE_PTR=%d\n", value);
+ mci->gpm_idx = value;
+ break;
+ case MCI_STATE_NEXT_GPM_OFFSET:
+ case MCI_STATE_LAST_GPM_OFFSET:
+ /*
+ * This could be useful to avoid new GPM message interrupt which
+ * may lead to spurious interrupt after power sleep, or multiple
+ * entry of ath_mci_intr().
+ * Adding empty GPM check by returning HAL_MCI_GPM_INVALID can
+ * alleviate this effect, but clearing GPM RX interrupt bit is
+ * safe, because whether this is called from hw or driver code
+ * there must be an interrupt bit set/triggered initially
+ */
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_GPM);
+
+ gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
+ value = gpm_ptr;
+
+ if (value == 0)
+ value = mci->gpm_len - 1;
+ else if (value >= mci->gpm_len) {
+ if (value != 0xFFFF) {
+ value = 0;
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM offset"
+ "out of range\n");
+ }
+ } else
+ value--;
+
+ if (value == 0xFFFF) {
+ value = MCI_GPM_INVALID;
+ more_gpm = MCI_GPM_NOMORE;
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM ptr invalid"
+ "@ptr=%d, offset=%d, more=GPM_NOMORE\n",
+ gpm_ptr, value);
+ } else if (state_type == MCI_STATE_NEXT_GPM_OFFSET) {
+
+ if (gpm_ptr == mci->gpm_idx) {
+ value = MCI_GPM_INVALID;
+ more_gpm = MCI_GPM_NOMORE;
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI GPM message"
+ "not available @ptr=%d, @offset=%d,"
+ "more=GPM_NOMORE\n", gpm_ptr, value);
+ } else {
+ for (;;) {
+
+ u32 temp_index;
+
+ /* skip reserved GPM if any */
+
+ if (value != mci->gpm_idx)
+ more_gpm = MCI_GPM_MORE;
+ else
+ more_gpm = MCI_GPM_NOMORE;
+
+ temp_index = mci->gpm_idx;
+ mci->gpm_idx++;
+
+ if (mci->gpm_idx >=
+ mci->gpm_len)
+ mci->gpm_idx = 0;
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI GPM message got ptr=%d,"
+ "@offset=%d, more=%d\n",
+ gpm_ptr, temp_index,
+ (more_gpm == MCI_GPM_MORE));
+
+ if (ar9003_mci_is_gpm_valid(ah,
+ temp_index)) {
+ value = temp_index;
+ break;
+ }
+
+ if (more_gpm == MCI_GPM_NOMORE) {
+ value = MCI_GPM_INVALID;
+ break;
+ }
+ }
+ }
+ if (p_data)
+ *p_data = more_gpm;
+ }
+
+ if (value != MCI_GPM_INVALID)
+ value <<= 4;
+
+ break;
+ case MCI_STATE_LAST_SCHD_MSG_OFFSET:
+ value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
+ AR_MCI_RX_LAST_SCHD_MSG_INDEX);
+ /* Make it in bytes */
+ value <<= 4;
+ break;
+
+ case MCI_STATE_REMOTE_SLEEP:
+ value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
+ AR_MCI_RX_REMOTE_SLEEP) ?
+ MCI_BT_SLEEP : MCI_BT_AWAKE;
+ break;
+
+ case MCI_STATE_CONT_RSSI_POWER:
+ value = MS(mci->cont_status, AR_MCI_CONT_RSSI_POWER);
+ break;
+
+ case MCI_STATE_CONT_PRIORITY:
+ value = MS(mci->cont_status, AR_MCI_CONT_RRIORITY);
+ break;
+
+ case MCI_STATE_CONT_TXRX:
+ value = MS(mci->cont_status, AR_MCI_CONT_TXRX);
+ break;
+
+ case MCI_STATE_BT:
+ value = mci->bt_state;
+ break;
+
+ case MCI_STATE_SET_BT_SLEEP:
+ mci->bt_state = MCI_BT_SLEEP;
+ break;
+
+ case MCI_STATE_SET_BT_AWAKE:
+ mci->bt_state = MCI_BT_AWAKE;
+ ar9003_mci_send_coex_version_query(ah, true);
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+
+ if (mci->unhalt_bt_gpm) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI unhalt BT GPM\n");
+ ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
+ }
+
+ ar9003_mci_2g5g_switch(ah, true);
+ break;
+
+ case MCI_STATE_SET_BT_CAL_START:
+ mci->bt_state = MCI_BT_CAL_START;
+ break;
+
+ case MCI_STATE_SET_BT_CAL:
+ mci->bt_state = MCI_BT_CAL;
+ break;
+
+ case MCI_STATE_RESET_REQ_WAKE:
+ ar9003_mci_reset_req_wakeup(ah);
+ mci->update_2g5g = true;
+
+ if ((AR_SREV_9462_20_OR_LATER(ah)) &&
+ (mci->config & ATH_MCI_CONFIG_MCI_OBS_MASK)) {
+ /* Check if we still have control of the GPIOs */
+ if ((REG_READ(ah, AR_GLB_GPIO_CONTROL) &
+ ATH_MCI_CONFIG_MCI_OBS_GPIO) !=
+ ATH_MCI_CONFIG_MCI_OBS_GPIO) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI reconfigure observation");
+ ar9003_mci_observation_set_up(ah);
+ }
+ }
+ break;
+
+ case MCI_STATE_SEND_WLAN_COEX_VERSION:
+ ar9003_mci_send_coex_version_response(ah, true);
+ break;
+
+ case MCI_STATE_SET_BT_COEX_VERSION:
+
+ if (!p_data)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Set BT Coex version with NULL data!!\n");
+ else {
+ mci->bt_ver_major = (*p_data >> 8) & 0xff;
+ mci->bt_ver_minor = (*p_data) & 0xff;
+ mci->bt_version_known = true;
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT version set: %d.%d\n",
+ mci->bt_ver_major,
+ mci->bt_ver_minor);
+ }
+ break;
+
+ case MCI_STATE_SEND_WLAN_CHANNELS:
+ if (p_data) {
+ if (((mci->wlan_channels[1] & 0xffff0000) ==
+ (*(p_data + 1) & 0xffff0000)) &&
+ (mci->wlan_channels[2] == *(p_data + 2)) &&
+ (mci->wlan_channels[3] == *(p_data + 3)))
+ break;
+
+ mci->wlan_channels[0] = *p_data++;
+ mci->wlan_channels[1] = *p_data++;
+ mci->wlan_channels[2] = *p_data++;
+ mci->wlan_channels[3] = *p_data++;
+ }
+ mci->wlan_channels_update = true;
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+ break;
+
+ case MCI_STATE_SEND_VERSION_QUERY:
+ ar9003_mci_send_coex_version_query(ah, true);
+ break;
+
+ case MCI_STATE_SEND_STATUS_QUERY:
+ query_type = (AR_SREV_9462_10(ah)) ?
+ MCI_GPM_COEX_QUERY_BT_ALL_INFO :
+ MCI_GPM_COEX_QUERY_BT_TOPOLOGY;
+
+ ar9003_mci_send_coex_bt_status_query(ah, true, query_type);
+ break;
+
+ case MCI_STATE_NEED_FLUSH_BT_INFO:
+ /*
+ * btcoex_hw.mci.unhalt_bt_gpm means whether it's
+ * needed to send UNHALT message. It's set whenever
+ * there's a request to send HALT message.
+ * mci_halted_bt_gpm means whether HALT message is sent
+ * out successfully.
+ *
+ * Checking (mci_unhalt_bt_gpm == false) instead of
+ * checking (ah->mci_halted_bt_gpm == false) will make
+ * sure currently is in UNHALT-ed mode and BT can
+ * respond to status query.
+ */
+ value = (!mci->unhalt_bt_gpm &&
+ mci->need_flush_btinfo) ? 1 : 0;
+ if (p_data)
+ mci->need_flush_btinfo =
+ (*p_data != 0) ? true : false;
+ break;
+
+ case MCI_STATE_RECOVER_RX:
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI hw RECOVER_RX\n");
+ ar9003_mci_prep_interface(ah);
+ mci->query_bt = true;
+ mci->need_flush_btinfo = true;
+ ar9003_mci_send_coex_wlan_channels(ah, true);
+ ar9003_mci_2g5g_switch(ah, true);
+ break;
+
+ case MCI_STATE_NEED_FTP_STOMP:
+ value = !(mci->config & ATH_MCI_CONFIG_DISABLE_FTP_STOMP);
+ break;
+
+ case MCI_STATE_NEED_TUNING:
+ value = !(mci->config & ATH_MCI_CONFIG_DISABLE_TUNING);
+ break;
+
+ default:
+ break;
+
+ }
+
+ return value;
+}
+EXPORT_SYMBOL(ar9003_mci_state);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.h b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
new file mode 100644
index 0000000..798da11
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2010-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef AR9003_MCI_H
+#define AR9003_MCI_H
+
+#define MCI_FLAG_DISABLE_TIMESTAMP 0x00000001 /* Disable time stamp */
+
+/* Default remote BT device MCI COEX version */
+#define MCI_GPM_COEX_MAJOR_VERSION_DEFAULT 3
+#define MCI_GPM_COEX_MINOR_VERSION_DEFAULT 0
+
+/* Local WLAN MCI COEX version */
+#define MCI_GPM_COEX_MAJOR_VERSION_WLAN 3
+#define MCI_GPM_COEX_MINOR_VERSION_WLAN 0
+
+enum mci_gpm_coex_query_type {
+ MCI_GPM_COEX_QUERY_BT_ALL_INFO = BIT(0),
+ MCI_GPM_COEX_QUERY_BT_TOPOLOGY = BIT(1),
+ MCI_GPM_COEX_QUERY_BT_DEBUG = BIT(2),
+};
+
+enum mci_gpm_coex_halt_bt_gpm {
+ MCI_GPM_COEX_BT_GPM_UNHALT,
+ MCI_GPM_COEX_BT_GPM_HALT
+};
+
+enum mci_gpm_coex_bt_update_flags_op {
+ MCI_GPM_COEX_BT_FLAGS_READ,
+ MCI_GPM_COEX_BT_FLAGS_SET,
+ MCI_GPM_COEX_BT_FLAGS_CLEAR
+};
+
+#define MCI_NUM_BT_CHANNELS 79
+
+#define MCI_BT_MCI_FLAGS_UPDATE_CORR 0x00000002
+#define MCI_BT_MCI_FLAGS_UPDATE_HDR 0x00000004
+#define MCI_BT_MCI_FLAGS_UPDATE_PLD 0x00000008
+#define MCI_BT_MCI_FLAGS_LNA_CTRL 0x00000010
+#define MCI_BT_MCI_FLAGS_DEBUG 0x00000020
+#define MCI_BT_MCI_FLAGS_SCHED_MSG 0x00000040
+#define MCI_BT_MCI_FLAGS_CONT_MSG 0x00000080
+#define MCI_BT_MCI_FLAGS_COEX_GPM 0x00000100
+#define MCI_BT_MCI_FLAGS_CPU_INT_MSG 0x00000200
+#define MCI_BT_MCI_FLAGS_MCI_MODE 0x00000400
+#define MCI_BT_MCI_FLAGS_AR9462_MODE 0x00001000
+#define MCI_BT_MCI_FLAGS_OTHER 0x00010000
+
+#define MCI_DEFAULT_BT_MCI_FLAGS 0x00011dde
+
+#define MCI_TOGGLE_BT_MCI_FLAGS (MCI_BT_MCI_FLAGS_UPDATE_CORR | \
+ MCI_BT_MCI_FLAGS_UPDATE_HDR | \
+ MCI_BT_MCI_FLAGS_UPDATE_PLD | \
+ MCI_BT_MCI_FLAGS_MCI_MODE)
+
+#define MCI_2G_FLAGS_CLEAR_MASK 0x00000000
+#define MCI_2G_FLAGS_SET_MASK MCI_TOGGLE_BT_MCI_FLAGS
+#define MCI_2G_FLAGS MCI_DEFAULT_BT_MCI_FLAGS
+
+#define MCI_5G_FLAGS_CLEAR_MASK MCI_TOGGLE_BT_MCI_FLAGS
+#define MCI_5G_FLAGS_SET_MASK 0x00000000
+#define MCI_5G_FLAGS (MCI_DEFAULT_BT_MCI_FLAGS & \
+ ~MCI_TOGGLE_BT_MCI_FLAGS)
+
+/*
+ * Default value for AR9462 is 0x00002201
+ */
+#define ATH_MCI_CONFIG_CONCUR_TX 0x00000003
+#define ATH_MCI_CONFIG_MCI_OBS_MCI 0x00000004
+#define ATH_MCI_CONFIG_MCI_OBS_TXRX 0x00000008
+#define ATH_MCI_CONFIG_MCI_OBS_BT 0x00000010
+#define ATH_MCI_CONFIG_DISABLE_MCI_CAL 0x00000020
+#define ATH_MCI_CONFIG_DISABLE_OSLA 0x00000040
+#define ATH_MCI_CONFIG_DISABLE_FTP_STOMP 0x00000080
+#define ATH_MCI_CONFIG_AGGR_THRESH 0x00000700
+#define ATH_MCI_CONFIG_AGGR_THRESH_S 8
+#define ATH_MCI_CONFIG_DISABLE_AGGR_THRESH 0x00000800
+#define ATH_MCI_CONFIG_CLK_DIV 0x00003000
+#define ATH_MCI_CONFIG_CLK_DIV_S 12
+#define ATH_MCI_CONFIG_DISABLE_TUNING 0x00004000
+#define ATH_MCI_CONFIG_MCI_WEIGHT_DBG 0x40000000
+#define ATH_MCI_CONFIG_DISABLE_MCI 0x80000000
+
+#define ATH_MCI_CONFIG_MCI_OBS_MASK (ATH_MCI_CONFIG_MCI_OBS_MCI | \
+ ATH_MCI_CONFIG_MCI_OBS_TXRX | \
+ ATH_MCI_CONFIG_MCI_OBS_BT)
+#define ATH_MCI_CONFIG_MCI_OBS_GPIO 0x0000002F
+
+#endif
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 0c462c9..a4450cb 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -14,6 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
#include "ar9003_phy.h"
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 04b060a..e41d269 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -14,6 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
#include "ar9003_phy.h"
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 497d746..ed64114 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -490,6 +490,8 @@
#define AR_PHY_TEST_CTL_TSTADC_EN_S 8
#define AR_PHY_TEST_CTL_RX_OBS_SEL 0x3C00
#define AR_PHY_TEST_CTL_RX_OBS_SEL_S 10
+#define AR_PHY_TEST_CTL_DEBUGPORT_SEL 0xe0000000
+#define AR_PHY_TEST_CTL_DEBUGPORT_SEL_S 29
#define AR_PHY_TSTDAC (AR_SM_BASE + 0x168)
@@ -1001,6 +1003,7 @@
/* GLB Registers */
#define AR_GLB_BASE 0x20000
+#define AR_GLB_GPIO_CONTROL (AR_GLB_BASE)
#define AR_PHY_GLB_CONTROL (AR_GLB_BASE + 0x44)
#define AR_GLB_SCRATCH(_ah) (AR_GLB_BASE + \
(AR_SREV_9462_20(_ah) ? 0x4c : 0x50))
diff --git a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
index 259a6f3..dc2054f 100644
--- a/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h
@@ -41,24 +41,24 @@
static const u32 ar9462_2p0_baseband_postamble[][5] = {
/* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */
- {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8011, 0xd00a8011},
- {0x00009820, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a012e},
- {0x00009824, 0x5ac640de, 0x5ac640d0, 0x5ac640d0, 0x5ac640de},
- {0x00009828, 0x0796be89, 0x0696b081, 0x0696b881, 0x0796be89},
+ {0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8011, 0xd00a800d},
+ {0x00009820, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a01ae},
+ {0x00009824, 0x5ac640de, 0x5ac640d0, 0x5ac640d0, 0x63c640da},
+ {0x00009828, 0x0796be89, 0x0696b081, 0x0696b881, 0x09143e81},
{0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
{0x00009830, 0x0000059c, 0x0000059c, 0x0000119c, 0x0000119c},
{0x00009c00, 0x000000c4, 0x000000c4, 0x000000c4, 0x000000c4},
{0x00009e00, 0x0372111a, 0x0372111a, 0x037216a0, 0x037216a0},
{0x00009e04, 0x001c2020, 0x001c2020, 0x001c2020, 0x001c2020},
- {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2},
- {0x00009e10, 0x92c88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x92c84d2e},
- {0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3379605e, 0x33795d5e},
+ {0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000d8},
+ {0x00009e10, 0x92c88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec86d2e},
+ {0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3376605e, 0x33795d5e},
{0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
- {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c782},
- {0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27},
+ {0x00009e3c, 0xcf946220, 0xcf946220, 0xcfd5c782, 0xcfd5c282},
+ {0x00009e44, 0x62321e27, 0x62321e27, 0xfe291e27, 0xfe291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
{0x0000a204, 0x013187c0, 0x013187c4, 0x013187c4, 0x013187c0},
@@ -81,6 +81,15 @@
{0x0000a2d0, 0x00041981, 0x00041981, 0x00041981, 0x00041982},
{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},
{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+ {0x0000a3a4, 0x00000010, 0x00000010, 0x00000000, 0x00000000},
+ {0x0000a3a8, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa, 0xaaaaaaaa},
+ {0x0000a3ac, 0xaaaaaa00, 0xaaaaaa30, 0xaaaaaa00, 0xaaaaaa00},
+ {0x0000a41c, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce},
+ {0x0000a420, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce},
+ {0x0000a424, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce},
+ {0x0000a428, 0x000001ce, 0x000001ce, 0x000001ce, 0x000001ce},
+ {0x0000a42c, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce},
+ {0x0000a430, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce, 0x1ce739ce},
{0x0000a830, 0x0000019c, 0x0000019c, 0x0000019c, 0x0000019c},
{0x0000ae04, 0x001c0000, 0x001c0000, 0x001c0000, 0x00100000},
{0x0000ae18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
@@ -1107,11 +1116,11 @@
{0x00009e30, 0x06336f77},
{0x00009e34, 0x6af6532f},
{0x00009e38, 0x0cc80c00},
- {0x00009e40, 0x0d261820},
+ {0x00009e40, 0x15262820},
{0x00009e4c, 0x00001004},
{0x00009e50, 0x00ff03f1},
- {0x00009e54, 0xe4c355c7},
- {0x00009e58, 0xfd897735},
+ {0x00009e54, 0xe4c555c2},
+ {0x00009e58, 0xfd857722},
{0x00009e5c, 0xe9198724},
{0x00009fc0, 0x803e4788},
{0x00009fc4, 0x0001efb5},
@@ -1142,9 +1151,6 @@
{0x0000a398, 0x001f0e0f},
{0x0000a39c, 0x0075393f},
{0x0000a3a0, 0xb79f6427},
- {0x0000a3a4, 0x00000000},
- {0x0000a3a8, 0xaaaaaaaa},
- {0x0000a3ac, 0x3c466478},
{0x0000a3c0, 0x20202020},
{0x0000a3c4, 0x22222220},
{0x0000a3c8, 0x20200020},
@@ -1167,12 +1173,6 @@
{0x0000a40c, 0x00820820},
{0x0000a414, 0x1ce739ce},
{0x0000a418, 0x2d001dce},
- {0x0000a41c, 0x1ce739ce},
- {0x0000a420, 0x000001ce},
- {0x0000a424, 0x1ce739ce},
- {0x0000a428, 0x000001ce},
- {0x0000a42c, 0x1ce739ce},
- {0x0000a430, 0x1ce739ce},
{0x0000a434, 0x00000000},
{0x0000a438, 0x00001801},
{0x0000a43c, 0x00100000},
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 93b45b4..130e5db 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -159,6 +159,9 @@
/* return block-ack bitmap index given sequence and starting sequence */
#define ATH_BA_INDEX(_st, _seq) (((_seq) - (_st)) & (IEEE80211_SEQ_MAX - 1))
+/* return the seqno for _start + _offset */
+#define ATH_BA_INDEX2SEQ(_seq, _offset) (((_seq) + (_offset)) & (IEEE80211_SEQ_MAX - 1))
+
/* returns delimiter padding required given the packet length */
#define ATH_AGGR_GET_NDELIM(_len) \
(((_len) >= ATH_AGGR_MINPLEN) ? 0 : \
@@ -238,6 +241,7 @@
struct ath_node *an;
struct ath_atx_ac *ac;
unsigned long tx_buf[BITS_TO_LONGS(ATH_TID_MAX_BUFS)];
+ int bar_index;
u16 seq_start;
u16 seq_next;
u16 baw_size;
@@ -252,9 +256,9 @@
struct ath_node {
#ifdef CONFIG_ATH9K_DEBUGFS
struct list_head list; /* for sc->nodes */
+#endif
struct ieee80211_sta *sta; /* station struct we're part of */
struct ieee80211_vif *vif; /* interface with which we're associated */
-#endif
struct ath_atx_tid tid[WME_NUM_TID];
struct ath_atx_ac ac[WME_NUM_AC];
int ps_key;
@@ -276,7 +280,6 @@
};
#define ATH_TX_ERROR 0x01
-#define ATH_TX_BAR 0x02
/**
* @txq_map: Index is mac80211 queue number. This is
@@ -462,7 +465,7 @@
#define ATH_LED_PIN_9287 8
#define ATH_LED_PIN_9300 10
#define ATH_LED_PIN_9485 6
-#define ATH_LED_PIN_9462 0
+#define ATH_LED_PIN_9462 4
#ifdef CONFIG_MAC80211_LEDS
void ath_init_leds(struct ath_softc *sc);
@@ -542,7 +545,7 @@
#define DEFAULT_CACHELINE 32
#define ATH_REGCLASSIDS_MAX 10
#define ATH_CABQ_READY_TIME 80 /* % of beacon interval */
-#define ATH_MAX_SW_RETRIES 10
+#define ATH_MAX_SW_RETRIES 30
#define ATH_CHAN_MAX 255
#define ATH_TXPOWER_MAX 100 /* .5 dBm units */
@@ -647,6 +650,7 @@
struct delayed_work tx_complete_work;
struct delayed_work hw_pll_work;
struct ath_btcoex btcoex;
+ struct ath_mci_coex mci_coex;
struct ath_descdma txsdma;
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index 5a6361d..bbb2081 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -14,13 +14,14 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "hw.h"
enum ath_bt_mode {
ATH_BT_COEX_MODE_LEGACY, /* legacy rx_clear mode */
ATH_BT_COEX_MODE_UNSLOTTED, /* untimed/unslotted mode */
ATH_BT_COEX_MODE_SLOTTED, /* slotted mode */
- ATH_BT_COEX_MODE_DISALBED, /* coexistence disabled */
+ ATH_BT_COEX_MODE_DISABLED, /* coexistence disabled */
};
struct ath_btcoex_config {
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index d5e5db1..278361c 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -54,8 +54,39 @@
ATH_BTCOEX_CFG_MCI,
};
+struct ath9k_hw_mci {
+ u32 raw_intr;
+ u32 rx_msg_intr;
+ u32 cont_status;
+ u32 gpm_addr;
+ u32 gpm_len;
+ u32 gpm_idx;
+ u32 sched_addr;
+ u32 wlan_channels[4];
+ u32 wlan_cal_seq;
+ u32 wlan_cal_done;
+ u32 config;
+ u8 *gpm_buf;
+ u8 *sched_buf;
+ bool ready;
+ bool update_2g5g;
+ bool is_2g;
+ bool query_bt;
+ bool unhalt_bt_gpm; /* need send UNHALT */
+ bool halted_bt_gpm; /* HALT sent */
+ bool need_flush_btinfo;
+ bool bt_version_known;
+ bool wlan_channels_update;
+ u8 wlan_ver_major;
+ u8 wlan_ver_minor;
+ u8 bt_ver_major;
+ u8 bt_ver_minor;
+ u8 bt_state;
+};
+
struct ath_btcoex_hw {
enum ath_btcoex_scheme scheme;
+ struct ath9k_hw_mci mci;
bool enabled;
u8 wlanactive_gpio;
u8 btactive_gpio;
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index ebaf304..9953881 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -16,6 +16,7 @@
#include "hw.h"
#include "hw-ops.h"
+#include <linux/export.h>
/* Common calibration code */
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 8e7e57c..68d972b 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/vmalloc.h>
+#include <linux/export.h>
#include <asm/unaligned.h>
#include "ath9k.h"
@@ -855,7 +856,7 @@
sc->debug.stats.txstats[qnum].tx_bytes_all += bf->bf_mpdu->len;
if (bf_isampdu(bf)) {
- if (flags & ATH_TX_BAR)
+ if (flags & ATH_TX_ERROR)
TX_STAT_INC(qnum, a_xretries);
else
TX_STAT_INC(qnum, a_completed);
@@ -1629,6 +1630,9 @@
debugfs_create_file("debug", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_debug);
#endif
+
+ ath9k_dfs_init_debug(sc);
+
debugfs_create_file("dma", S_IRUSR, sc->debug.debugfs_phy, sc,
&fops_dma);
debugfs_create_file("interrupt", S_IRUSR, sc->debug.debugfs_phy, sc,
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 356352a..776a24a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -19,6 +19,7 @@
#include "hw.h"
#include "rc.h"
+#include "dfs_debug.h"
struct ath_txq;
struct ath_buf;
@@ -187,6 +188,7 @@
struct ath_interrupt_stats istats;
struct ath_tx_stats txstats[ATH9K_NUM_TX_QUEUES];
struct ath_rx_stats rxstats;
+ struct ath_dfs_stats dfs_stats;
u32 reset[__RESET_TYPE_MAX];
};
diff --git a/drivers/net/wireless/ath/ath9k/dfs.c b/drivers/net/wireless/ath/ath9k/dfs.c
new file mode 100644
index 0000000..e4e84a9
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dfs.c
@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ * Copyright (c) 2011 Neratec Solutions AG
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "hw.h"
+#include "hw-ops.h"
+#include "ath9k.h"
+#include "dfs.h"
+#include "dfs_debug.h"
+
+/*
+ * TODO: move into or synchronize this with generic header
+ * as soon as IF is defined
+ */
+struct dfs_radar_pulse {
+ u16 freq;
+ u64 ts;
+ u32 width;
+ u8 rssi;
+};
+
+/* internal struct to pass radar data */
+struct ath_radar_data {
+ u8 pulse_bw_info;
+ u8 rssi;
+ u8 ext_rssi;
+ u8 pulse_length_ext;
+ u8 pulse_length_pri;
+};
+
+/* convert pulse duration to usecs, considering clock mode */
+static u32 dur_to_usecs(struct ath_hw *ah, u32 dur)
+{
+ const u32 AR93X_NSECS_PER_DUR = 800;
+ const u32 AR93X_NSECS_PER_DUR_FAST = (8000 / 11);
+ u32 nsecs;
+
+ if (IS_CHAN_A_FAST_CLOCK(ah, ah->curchan))
+ nsecs = dur * AR93X_NSECS_PER_DUR_FAST;
+ else
+ nsecs = dur * AR93X_NSECS_PER_DUR;
+
+ return (nsecs + 500) / 1000;
+}
+
+#define PRI_CH_RADAR_FOUND 0x01
+#define EXT_CH_RADAR_FOUND 0x02
+static bool
+ath9k_postprocess_radar_event(struct ath_softc *sc,
+ struct ath_radar_data *are,
+ struct dfs_radar_pulse *drp)
+{
+ u8 rssi;
+ u16 dur;
+
+ ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_DFS,
+ "pulse_bw_info=0x%x, pri,ext len/rssi=(%u/%u, %u/%u)\n",
+ are->pulse_bw_info,
+ are->pulse_length_pri, are->rssi,
+ are->pulse_length_ext, are->ext_rssi);
+
+ /*
+ * Only the last 2 bits of the BW info are relevant, they indicate
+ * which channel the radar was detected in.
+ */
+ are->pulse_bw_info &= 0x03;
+
+ switch (are->pulse_bw_info) {
+ case PRI_CH_RADAR_FOUND:
+ /* radar in ctrl channel */
+ dur = are->pulse_length_pri;
+ DFS_STAT_INC(sc, pri_phy_errors);
+ /*
+ * cannot use ctrl channel RSSI
+ * if extension channel is stronger
+ */
+ rssi = (are->ext_rssi >= (are->rssi + 3)) ? 0 : are->rssi;
+ break;
+ case EXT_CH_RADAR_FOUND:
+ /* radar in extension channel */
+ dur = are->pulse_length_ext;
+ DFS_STAT_INC(sc, ext_phy_errors);
+ /*
+ * cannot use extension channel RSSI
+ * if control channel is stronger
+ */
+ rssi = (are->rssi >= (are->ext_rssi + 12)) ? 0 : are->ext_rssi;
+ break;
+ case (PRI_CH_RADAR_FOUND | EXT_CH_RADAR_FOUND):
+ /*
+ * Conducted testing, when pulse is on DC, both pri and ext
+ * durations are reported to be same
+ *
+ * Radiated testing, when pulse is on DC, different pri and
+ * ext durations are reported, so take the larger of the two
+ */
+ if (are->pulse_length_ext >= are->pulse_length_pri)
+ dur = are->pulse_length_ext;
+ else
+ dur = are->pulse_length_pri;
+ DFS_STAT_INC(sc, dc_phy_errors);
+
+ /* when both are present use stronger one */
+ rssi = (are->rssi < are->ext_rssi) ? are->ext_rssi : are->rssi;
+ break;
+ default:
+ /*
+ * Bogus bandwidth info was received in descriptor,
+ * so ignore this PHY error
+ */
+ DFS_STAT_INC(sc, bwinfo_discards);
+ return false;
+ }
+
+ if (rssi == 0) {
+ DFS_STAT_INC(sc, rssi_discards);
+ return false;
+ }
+
+ /*
+ * TODO: check chirping pulses
+ * checks for chirping are dependent on the DFS regulatory domain
+ * used, which is yet TBD
+ */
+
+ /* convert duration to usecs */
+ drp->width = dur_to_usecs(sc->sc_ah, dur);
+ drp->rssi = rssi;
+
+ DFS_STAT_INC(sc, pulses_detected);
+ return true;
+}
+#undef PRI_CH_RADAR_FOUND
+#undef EXT_CH_RADAR_FOUND
+
+/*
+ * DFS: check PHY-error for radar pulse and feed the detector
+ */
+void ath9k_dfs_process_phyerr(struct ath_softc *sc, void *data,
+ struct ath_rx_status *rs, u64 mactime)
+{
+ struct ath_radar_data ard;
+ u16 datalen;
+ char *vdata_end;
+ struct dfs_radar_pulse drp;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if ((!(rs->rs_phyerr != ATH9K_PHYERR_RADAR)) &&
+ (!(rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT))) {
+ ath_dbg(common, ATH_DBG_DFS,
+ "Error: rs_phyer=0x%x not a radar error\n",
+ rs->rs_phyerr);
+ return;
+ }
+
+ datalen = rs->rs_datalen;
+ if (datalen == 0) {
+ DFS_STAT_INC(sc, datalen_discards);
+ return;
+ }
+
+ ard.rssi = rs->rs_rssi_ctl0;
+ ard.ext_rssi = rs->rs_rssi_ext0;
+
+ /*
+ * hardware stores this as 8 bit signed value.
+ * we will cap it at 0 if it is a negative number
+ */
+ if (ard.rssi & 0x80)
+ ard.rssi = 0;
+ if (ard.ext_rssi & 0x80)
+ ard.ext_rssi = 0;
+
+ vdata_end = (char *)data + datalen;
+ ard.pulse_bw_info = vdata_end[-1];
+ ard.pulse_length_ext = vdata_end[-2];
+ ard.pulse_length_pri = vdata_end[-3];
+
+ ath_dbg(common, ATH_DBG_DFS,
+ "bw_info=%d, length_pri=%d, length_ext=%d, "
+ "rssi_pri=%d, rssi_ext=%d\n",
+ ard.pulse_bw_info, ard.pulse_length_pri, ard.pulse_length_ext,
+ ard.rssi, ard.ext_rssi);
+
+ drp.freq = ah->curchan->channel;
+ drp.ts = mactime;
+ if (ath9k_postprocess_radar_event(sc, &ard, &drp)) {
+ static u64 last_ts;
+ ath_dbg(common, ATH_DBG_DFS,
+ "ath9k_dfs_process_phyerr: channel=%d, ts=%llu, "
+ "width=%d, rssi=%d, delta_ts=%llu\n",
+ drp.freq, drp.ts, drp.width, drp.rssi, drp.ts-last_ts);
+ last_ts = drp.ts;
+ /*
+ * TODO: forward pulse to pattern detector
+ *
+ * ieee80211_add_radar_pulse(drp.freq, drp.ts,
+ * drp.width, drp.rssi);
+ */
+ }
+}
diff --git a/drivers/net/wireless/ath/ath9k/dfs.h b/drivers/net/wireless/ath/ath9k/dfs.h
new file mode 100644
index 0000000..c241285
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dfs.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ * Copyright (c) 2011 Neratec Solutions AG
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH9K_DFS_H
+#define ATH9K_DFS_H
+
+#if defined(CONFIG_ATH9K_DFS_CERTIFIED)
+/**
+ * ath9k_dfs_process_phyerr - process radar PHY error
+ * @sc: ath_softc
+ * @data: RX payload data
+ * @rs: RX status after processing descriptor
+ * @mactime: receive time
+ *
+ * This function is called whenever the HW DFS module detects a radar
+ * pulse and reports it as a PHY error.
+ *
+ * The radar information provided as raw payload data is validated and
+ * filtered for false pulses. Events passing all tests are forwarded to
+ * the upper layer for pattern detection.
+ */
+void ath9k_dfs_process_phyerr(struct ath_softc *sc, void *data,
+ struct ath_rx_status *rs, u64 mactime);
+#else
+static inline void ath9k_dfs_process_phyerr(struct ath_softc *sc, void *data,
+ struct ath_rx_status *rs, u64 mactime) { }
+#endif
+
+#endif /* ATH9K_DFS_H */
diff --git a/drivers/net/wireless/ath/ath9k/dfs_debug.c b/drivers/net/wireless/ath/ath9k/dfs_debug.c
new file mode 100644
index 0000000..106d031
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dfs_debug.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ * Copyright (c) 2011 Neratec Solutions AG
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/export.h>
+
+#include "ath9k.h"
+#include "dfs_debug.h"
+
+#define ATH9K_DFS_STAT(s, p) \
+ len += snprintf(buf + len, size - len, "%28s : %10u\n", s, \
+ sc->debug.stats.dfs_stats.p);
+
+static ssize_t read_file_dfs(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath_softc *sc = file->private_data;
+ struct ath9k_hw_version *hw_ver = &sc->sc_ah->hw_version;
+ char *buf;
+ unsigned int len = 0, size = 8000;
+ ssize_t retval = 0;
+
+ buf = kzalloc(size, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ len += snprintf(buf + len, size - len, "DFS support for "
+ "macVersion = 0x%x, macRev = 0x%x: %s\n",
+ hw_ver->macVersion, hw_ver->macRev,
+ (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_DFS) ?
+ "enabled" : "disabled");
+ ATH9K_DFS_STAT("DFS pulses detected ", pulses_detected);
+ ATH9K_DFS_STAT("Datalen discards ", datalen_discards);
+ ATH9K_DFS_STAT("RSSI discards ", rssi_discards);
+ ATH9K_DFS_STAT("BW info discards ", bwinfo_discards);
+ ATH9K_DFS_STAT("Primary channel pulses ", pri_phy_errors);
+ ATH9K_DFS_STAT("Secondary channel pulses", ext_phy_errors);
+ ATH9K_DFS_STAT("Dual channel pulses ", dc_phy_errors);
+
+ if (len > size)
+ len = size;
+
+ retval = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return retval;
+}
+
+static int ath9k_dfs_debugfs_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+
+ return 0;
+}
+
+static const struct file_operations fops_dfs_stats = {
+ .read = read_file_dfs,
+ .open = ath9k_dfs_debugfs_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+void ath9k_dfs_init_debug(struct ath_softc *sc)
+{
+ debugfs_create_file("dfs_stats", S_IRUSR,
+ sc->debug.debugfs_phy, sc, &fops_dfs_stats);
+}
diff --git a/drivers/net/wireless/ath/ath9k/dfs_debug.h b/drivers/net/wireless/ath/ath9k/dfs_debug.h
new file mode 100644
index 0000000..6e1e2a7
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/dfs_debug.h
@@ -0,0 +1,57 @@
+/*
+ * Copyright (c) 2008-2011 Atheros Communications Inc.
+ * Copyright (c) 2011 Neratec Solutions AG
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+
+#ifndef DFS_DEBUG_H
+#define DFS_DEBUG_H
+
+#include "hw.h"
+
+/**
+ * struct ath_dfs_stats - DFS Statistics
+ *
+ * @pulses_detected: No. of pulses detected so far
+ * @datalen_discards: No. of pulses discarded due to invalid datalen
+ * @rssi_discards: No. of pulses discarded due to invalid RSSI
+ * @bwinfo_discards: No. of pulses discarded due to invalid BW info
+ * @pri_phy_errors: No. of pulses reported for primary channel
+ * @ext_phy_errors: No. of pulses reported for extension channel
+ * @dc_phy_errors: No. of pulses reported for primary + extension channel
+ */
+struct ath_dfs_stats {
+ u32 pulses_detected;
+ u32 datalen_discards;
+ u32 rssi_discards;
+ u32 bwinfo_discards;
+ u32 pri_phy_errors;
+ u32 ext_phy_errors;
+ u32 dc_phy_errors;
+};
+
+#if defined(CONFIG_ATH9K_DFS_DEBUGFS)
+
+#define DFS_STAT_INC(sc, c) (sc->debug.stats.dfs_stats.c++)
+void ath9k_dfs_init_debug(struct ath_softc *sc);
+
+#else
+
+#define DFS_STAT_INC(sc, c) do { } while (0)
+static inline void ath9k_dfs_init_debug(struct ath_softc *sc) { }
+
+#endif /* CONFIG_ATH9K_DFS_DEBUGFS */
+
+#endif /* DFS_DEBUG_H */
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index 9a7520f..61fcab0 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -473,7 +473,7 @@
int i;
u16 twiceMinEdgePower;
- u16 twiceMaxEdgePower = MAX_RATE_POWER;
+ u16 twiceMaxEdgePower;
u16 scaledPower = 0, minCtlPower;
u16 numCtlModes;
const u16 *pCtlMode;
@@ -542,9 +542,7 @@
else
freq = centers.ctl_center;
- if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
- ah->eep_ops->get_eeprom_rev(ah) <= 2)
- twiceMaxEdgePower = MAX_RATE_POWER;
+ twiceMaxEdgePower = MAX_RATE_POWER;
for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
pEepData->ctlIndex[i]; i++) {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 4f5c50a..0981c07 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -569,7 +569,7 @@
#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6
#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10
- u16 twiceMaxEdgePower = MAX_RATE_POWER;
+ u16 twiceMaxEdgePower;
int i;
struct cal_ctl_data_ar9287 *rep;
struct cal_target_power_leg targetPowerOfdm = {0, {0, 0, 0, 0} },
@@ -669,6 +669,7 @@
else
freq = centers.ctl_center;
+ twiceMaxEdgePower = MAX_RATE_POWER;
/* Walk through the CTL indices stored in EEPROM */
for (i = 0; (i < AR9287_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
struct cal_ctl_edges *pRdEdgesPower;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 81e6296..55a21d3 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -1000,7 +1000,7 @@
#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */
struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
- u16 twiceMaxEdgePower = MAX_RATE_POWER;
+ u16 twiceMaxEdgePower;
int i;
struct cal_ctl_data *rep;
struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
@@ -1121,9 +1121,7 @@
else
freq = centers.ctl_center;
- if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
- ah->eep_ops->get_eeprom_rev(ah) <= 2)
- twiceMaxEdgePower = MAX_RATE_POWER;
+ twiceMaxEdgePower = MAX_RATE_POWER;
for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
if ((((cfgCtl & ~CTL_MODE_M) |
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 0b9a0e8..f8ce4ea 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -808,7 +808,8 @@
}
/* Verify whether we must check ANI */
- if ((timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
+ if (ah->config.enable_ani &&
+ (timestamp - common->ani.checkani_timer) >= ATH_ANI_POLLINTERVAL) {
aniflag = true;
common->ani.checkani_timer = timestamp;
}
@@ -838,7 +839,7 @@
* short calibration and long calibration.
*/
cal_interval = ATH_LONG_CALINTERVAL;
- if (priv->ah->config.enable_ani)
+ if (ah->config.enable_ani)
cal_interval = min(cal_interval, (u32)ATH_ANI_POLLINTERVAL);
if (!common->ani.caldone)
cal_interval = min(cal_interval, (u32)short_cal_interval);
diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h
index e74c233..c4ad0b0 100644
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -212,4 +212,13 @@
return ath9k_hw_private_ops(ah)->fast_chan_change(ah, chan,
ini_reloaded);
}
+
+static inline void ath9k_hw_set_radar_params(struct ath_hw *ah)
+{
+ if (!ath9k_hw_private_ops(ah)->set_radar_params)
+ return;
+
+ ath9k_hw_private_ops(ah)->set_radar_params(ah, &ah->radar_conf);
+}
+
#endif /* ATH9K_HW_OPS_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 27471f8..8cda9a1 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/module.h>
#include <asm/unaligned.h>
#include "hw.h"
@@ -503,7 +504,7 @@
return ecode;
}
- if (!AR_SREV_9100(ah) && !AR_SREV_9340(ah)) {
+ if (ah->config.enable_ani) {
ath9k_hw_ani_setup(ah);
ath9k_hw_ani_init(ah);
}
@@ -609,6 +610,10 @@
if (!AR_SREV_9300_20_OR_LATER(ah))
ah->ani_function &= ~ATH9K_ANI_MRC_CCK;
+ /* disable ANI for 9340 */
+ if (AR_SREV_9340(ah))
+ ah->config.enable_ani = false;
+
ath9k_hw_init_mode_regs(ah);
if (!ah->is_pciexpress)
@@ -1349,6 +1354,7 @@
static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type)
{
+ bool ret = false;
if (AR_SREV_9300_20_OR_LATER(ah)) {
REG_WRITE(ah, AR_WA, ah->WARegVal);
@@ -1360,13 +1366,20 @@
switch (type) {
case ATH9K_RESET_POWER_ON:
- return ath9k_hw_set_reset_power_on(ah);
+ ret = ath9k_hw_set_reset_power_on(ah);
+ break;
case ATH9K_RESET_WARM:
case ATH9K_RESET_COLD:
- return ath9k_hw_set_reset(ah, type);
+ ret = ath9k_hw_set_reset(ah, type);
+ break;
default:
- return false;
+ break;
}
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
+ REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+
+ return ret;
}
static bool ath9k_hw_chip_reset(struct ath_hw *ah,
@@ -1505,6 +1518,7 @@
struct ath9k_hw_cal_data *caldata, bool bChannelChange)
{
struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
u32 saveLedState;
struct ath9k_channel *curchan = ah->curchan;
u32 saveDefAntenna;
@@ -1512,6 +1526,53 @@
u64 tsf = 0;
int i, r;
bool allow_fbs = false;
+ bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
+ bool save_fullsleep = ah->chip_fullsleep;
+
+ if (mci) {
+
+ ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan));
+
+ if (mci_hw->bt_state == MCI_BT_CAL_START) {
+ u32 payload[4] = {0, 0, 0, 0};
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI stop rx for BT CAL");
+
+ mci_hw->bt_state = MCI_BT_CAL;
+
+ /*
+ * MCI FIX: disable mci interrupt here. This is to avoid
+ * SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and
+ * lead to mci_intr reentry.
+ */
+
+ ar9003_mci_disable_interrupt(ah);
+
+ ath_dbg(common, ATH_DBG_MCI, "send WLAN_CAL_GRANT");
+ MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT);
+ ar9003_mci_send_message(ah, MCI_GPM, 0, payload,
+ 16, true, false);
+
+ ath_dbg(common, ATH_DBG_MCI, "\nMCI BT is calibrating");
+
+ /* Wait BT calibration to be completed for 25ms */
+
+ if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE,
+ 0, 25000))
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI got BT_CAL_DONE\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI ### BT cal takes to long, force"
+ "bt_state to be bt_awake\n");
+ mci_hw->bt_state = MCI_BT_AWAKE;
+ /* MCI FIX: enable mci interrupt here */
+ ar9003_mci_enable_interrupt(ah);
+
+ return true;
+ }
+ }
+
if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
return -EIO;
@@ -1549,12 +1610,29 @@
if (ath9k_hw_channel_change(ah, chan)) {
ath9k_hw_loadnf(ah, ah->curchan);
ath9k_hw_start_nfcal(ah, true);
+ if (mci && mci_hw->ready)
+ ar9003_mci_2g5g_switch(ah, true);
+
if (AR_SREV_9271(ah))
ar9002_hw_load_ani_reg(ah, chan);
return 0;
}
}
+ if (mci) {
+ ar9003_mci_disable_interrupt(ah);
+
+ if (mci_hw->ready && !save_fullsleep) {
+ ar9003_mci_mute_bt(ah);
+ udelay(20);
+ REG_WRITE(ah, AR_BTCOEX_CTRL, 0);
+ }
+
+ mci_hw->bt_state = MCI_BT_SLEEP;
+ mci_hw->ready = false;
+ }
+
+
saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA);
if (saveDefAntenna == 0)
saveDefAntenna = 1;
@@ -1610,6 +1688,9 @@
if (r)
return r;
+ if (mci)
+ ar9003_mci_reset(ah, false, IS_CHAN_2GHZ(chan), save_fullsleep);
+
/*
* Some AR91xx SoC devices frequently fail to accept TSF writes
* right after the chip reset. When that happens, write a new
@@ -1727,6 +1808,55 @@
ath9k_hw_loadnf(ah, chan);
ath9k_hw_start_nfcal(ah, true);
+ if (mci && mci_hw->ready) {
+
+ if (IS_CHAN_2GHZ(chan) &&
+ (mci_hw->bt_state == MCI_BT_SLEEP)) {
+
+ if (ar9003_mci_check_int(ah,
+ AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) ||
+ ar9003_mci_check_int(ah,
+ AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) {
+
+ /*
+ * BT is sleeping. Check if BT wakes up during
+ * WLAN calibration. If BT wakes up during
+ * WLAN calibration, need to go through all
+ * message exchanges again and recal.
+ */
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI BT wakes up"
+ "during WLAN calibration\n");
+
+ REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+ AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
+ AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE);
+ ath_dbg(common, ATH_DBG_MCI, "MCI send"
+ "REMOTE_RESET\n");
+ ar9003_mci_remote_reset(ah, true);
+ ar9003_mci_send_sys_waking(ah, true);
+ udelay(1);
+ if (IS_CHAN_2GHZ(chan))
+ ar9003_mci_send_lna_transfer(ah, true);
+
+ mci_hw->bt_state = MCI_BT_AWAKE;
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI re-cal\n");
+
+ if (caldata) {
+ caldata->done_txiqcal_once = false;
+ caldata->done_txclcal_once = false;
+ caldata->rtt_hist.num_readings = 0;
+ }
+
+ if (!ath9k_hw_init_cal(ah, chan))
+ return -EIO;
+
+ }
+ }
+ ar9003_mci_enable_interrupt(ah);
+ }
+
ENABLE_REGWRITE_BUFFER(ah);
ath9k_hw_restore_chainmask(ah);
@@ -1769,6 +1899,21 @@
if (ah->btcoex_hw.enabled)
ath9k_hw_btcoex_enable(ah);
+ if (mci && mci_hw->ready) {
+ /*
+ * check BT state again to make
+ * sure it's not changed.
+ */
+
+ ar9003_mci_sync_bt_state(ah);
+ ar9003_mci_2g5g_switch(ah, true);
+
+ if ((mci_hw->bt_state == MCI_BT_AWAKE) &&
+ (mci_hw->query_bt == true)) {
+ mci_hw->need_flush_btinfo = true;
+ }
+ }
+
if (AR_SREV_9300_20_OR_LATER(ah)) {
ar9003_hw_bb_watchdog_config(ah);
@@ -1826,7 +1971,8 @@
}
/* Clear Bit 14 of AR_WA after putting chip into Full Sleep mode. */
- REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE);
+ if (AR_SREV_9300_20_OR_LATER(ah))
+ REG_WRITE(ah, AR_WA, ah->WARegVal & ~AR_WA_D3_L1_DISABLE);
}
/*
@@ -1932,6 +2078,7 @@
bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
{
struct ath_common *common = ath9k_hw_common(ah);
+ struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
int status = true, setChip = true;
static const char *modes[] = {
"AWAKE",
@@ -1949,12 +2096,35 @@
switch (mode) {
case ATH9K_PM_AWAKE:
status = ath9k_hw_set_power_awake(ah, setChip);
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
+ REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+
break;
case ATH9K_PM_FULL_SLEEP:
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI) {
+ if (ar9003_mci_state(ah, MCI_STATE_ENABLE, NULL) &&
+ (mci->bt_state != MCI_BT_SLEEP) &&
+ !mci->halted_bt_gpm) {
+ ath_dbg(common, ATH_DBG_MCI, "MCI halt BT GPM"
+ "(full_sleep)");
+ ar9003_mci_send_coex_halt_bt_gpm(ah,
+ true, true);
+ }
+
+ mci->ready = false;
+ REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+ }
+
ath9k_set_power_sleep(ah, setChip);
ah->chip_fullsleep = true;
break;
case ATH9K_PM_NETWORK_SLEEP:
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
+ REG_WRITE(ah, AR_RTC_KEEP_AWAKE, 0x2);
+
ath9k_set_power_network_sleep(ah, setChip);
break;
default:
@@ -2107,6 +2277,30 @@
return chip_chainmask;
}
+/**
+ * ath9k_hw_dfs_tested - checks if DFS has been tested with used chipset
+ * @ah: the atheros hardware data structure
+ *
+ * We enable DFS support upstream on chipsets which have passed a series
+ * of tests. The testing requirements are going to be documented. Desired
+ * test requirements are documented at:
+ *
+ * http://wireless.kernel.org/en/users/Drivers/ath9k/dfs
+ *
+ * Once a new chipset gets properly tested an individual commit can be used
+ * to document the testing for DFS for that chipset.
+ */
+static bool ath9k_hw_dfs_tested(struct ath_hw *ah)
+{
+
+ switch (ah->hw_version.macVersion) {
+ /* AR9580 will likely be our first target to get testing on */
+ case AR_SREV_VERSION_9580:
+ default:
+ return false;
+ }
+}
+
int ath9k_hw_fill_cap_info(struct ath_hw *ah)
{
struct ath9k_hw_capabilities *pCap = &ah->caps;
@@ -2147,6 +2341,8 @@
if (AR_SREV_9485(ah) || AR_SREV_9285(ah) || AR_SREV_9330(ah))
chip_chainmask = 1;
+ else if (AR_SREV_9462(ah))
+ chip_chainmask = 3;
else if (!AR_SREV_9280_20_OR_LATER(ah))
chip_chainmask = 7;
else if (!AR_SREV_9300_20_OR_LATER(ah) || AR_SREV_9340(ah))
@@ -2203,12 +2399,10 @@
else
pCap->num_gpio_pins = AR_NUM_GPIO;
- if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah)) {
- pCap->hw_caps |= ATH9K_HW_CAP_CST;
+ if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah))
pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX;
- } else {
+ else
pCap->rts_aggr_limit = (8 * 1024);
- }
#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
ah->rfsilent = ah->eep_ops->get_eeprom(ah, EEP_RF_SILENT);
@@ -2232,7 +2426,9 @@
pCap->hw_caps |= ATH9K_HW_CAP_4KB_SPLITTRANS;
if (common->btcoex_enabled) {
- if (AR_SREV_9300_20_OR_LATER(ah)) {
+ if (AR_SREV_9462(ah))
+ btcoex_hw->scheme = ATH_BTCOEX_CFG_MCI;
+ else if (AR_SREV_9300_20_OR_LATER(ah)) {
btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO_9300;
btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO_9300;
@@ -2316,6 +2512,9 @@
pCap->pcie_lcr_offset = 0x80;
}
+ if (ath9k_hw_dfs_tested(ah))
+ pCap->hw_caps |= ATH9K_HW_CAP_DFS;
+
tx_chainmask = pCap->tx_chainmask;
rx_chainmask = pCap->rx_chainmask;
while (tx_chainmask || rx_chainmask) {
@@ -2330,7 +2529,7 @@
if (AR_SREV_9300_20_OR_LATER(ah)) {
ah->enabled_cals |= TX_IQ_CAL;
- if (!AR_SREV_9330(ah))
+ if (AR_SREV_9485_OR_LATER(ah))
ah->enabled_cals |= TX_IQ_ON_AGC_CAL;
}
if (AR_SREV_9462(ah))
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 3cb878c..615cc83 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -126,6 +126,16 @@
#define AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL 4
#define AR_GPIO_OUTPUT_MUX_AS_MAC_NETWORK_LED 5
#define AR_GPIO_OUTPUT_MUX_AS_MAC_POWER_LED 6
+#define AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_DATA 0x16
+#define AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_CLK 0x17
+#define AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA 0x18
+#define AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK 0x19
+#define AR_GPIO_OUTPUT_MUX_AS_WL_IN_TX 0x14
+#define AR_GPIO_OUTPUT_MUX_AS_WL_IN_RX 0x13
+#define AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX 9
+#define AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX 8
+#define AR_GPIO_OUTPUT_MUX_AS_RUCKUS_STROBE 0x1d
+#define AR_GPIO_OUTPUT_MUX_AS_RUCKUS_DATA 0x1e
#define AR_GPIOD_MASK 0x00001FFF
#define AR_GPIO_BIT(_gpio) (1 << (_gpio))
@@ -186,21 +196,21 @@
enum ath9k_hw_caps {
ATH9K_HW_CAP_HT = BIT(0),
ATH9K_HW_CAP_RFSILENT = BIT(1),
- ATH9K_HW_CAP_CST = BIT(2),
- ATH9K_HW_CAP_AUTOSLEEP = BIT(4),
- ATH9K_HW_CAP_4KB_SPLITTRANS = BIT(5),
- ATH9K_HW_CAP_EDMA = BIT(6),
- ATH9K_HW_CAP_RAC_SUPPORTED = BIT(7),
- ATH9K_HW_CAP_LDPC = BIT(8),
- ATH9K_HW_CAP_FASTCLOCK = BIT(9),
- ATH9K_HW_CAP_SGI_20 = BIT(10),
- ATH9K_HW_CAP_PAPRD = BIT(11),
- ATH9K_HW_CAP_ANT_DIV_COMB = BIT(12),
- ATH9K_HW_CAP_2GHZ = BIT(13),
- ATH9K_HW_CAP_5GHZ = BIT(14),
- ATH9K_HW_CAP_APM = BIT(15),
- ATH9K_HW_CAP_RTT = BIT(16),
- ATH9K_HW_CAP_MCI = BIT(17),
+ ATH9K_HW_CAP_AUTOSLEEP = BIT(2),
+ ATH9K_HW_CAP_4KB_SPLITTRANS = BIT(3),
+ ATH9K_HW_CAP_EDMA = BIT(4),
+ ATH9K_HW_CAP_RAC_SUPPORTED = BIT(5),
+ ATH9K_HW_CAP_LDPC = BIT(6),
+ ATH9K_HW_CAP_FASTCLOCK = BIT(7),
+ ATH9K_HW_CAP_SGI_20 = BIT(8),
+ ATH9K_HW_CAP_PAPRD = BIT(9),
+ ATH9K_HW_CAP_ANT_DIV_COMB = BIT(10),
+ ATH9K_HW_CAP_2GHZ = BIT(11),
+ ATH9K_HW_CAP_5GHZ = BIT(12),
+ ATH9K_HW_CAP_APM = BIT(13),
+ ATH9K_HW_CAP_RTT = BIT(14),
+ ATH9K_HW_CAP_MCI = BIT(15),
+ ATH9K_HW_CAP_DFS = BIT(16),
};
struct ath9k_hw_capabilities {
@@ -266,6 +276,7 @@
ATH9K_INT_TX = 0x00000040,
ATH9K_INT_TXDESC = 0x00000080,
ATH9K_INT_TIM_TIMER = 0x00000100,
+ ATH9K_INT_MCI = 0x00000200,
ATH9K_INT_BB_WATCHDOG = 0x00000400,
ATH9K_INT_TXURN = 0x00000800,
ATH9K_INT_MIB = 0x00001000,
@@ -417,6 +428,25 @@
ATH9K_RX_QUEUE_MAX,
};
+enum mci_message_header { /* length of payload */
+ MCI_LNA_CTRL = 0x10, /* len = 0 */
+ MCI_CONT_NACK = 0x20, /* len = 0 */
+ MCI_CONT_INFO = 0x30, /* len = 4 */
+ MCI_CONT_RST = 0x40, /* len = 0 */
+ MCI_SCHD_INFO = 0x50, /* len = 16 */
+ MCI_CPU_INT = 0x60, /* len = 4 */
+ MCI_SYS_WAKING = 0x70, /* len = 0 */
+ MCI_GPM = 0x80, /* len = 16 */
+ MCI_LNA_INFO = 0x90, /* len = 1 */
+ MCI_LNA_STATE = 0x94,
+ MCI_LNA_TAKE = 0x98,
+ MCI_LNA_TRANS = 0x9c,
+ MCI_SYS_SLEEPING = 0xa0, /* len = 0 */
+ MCI_REQ_WAKE = 0xc0, /* len = 0 */
+ MCI_DEBUG_16 = 0xfe, /* len = 2 */
+ MCI_REMOTE_RESET = 0xff /* len = 16 */
+};
+
enum ath_mci_gpm_coex_profile_type {
MCI_GPM_COEX_PROFILE_UNKNOWN,
MCI_GPM_COEX_PROFILE_RFCOMM,
@@ -427,6 +457,132 @@
MCI_GPM_COEX_PROFILE_MAX
};
+/* MCI GPM/Coex opcode/type definitions */
+enum {
+ MCI_GPM_COEX_W_GPM_PAYLOAD = 1,
+ MCI_GPM_COEX_B_GPM_TYPE = 4,
+ MCI_GPM_COEX_B_GPM_OPCODE = 5,
+ /* MCI_GPM_WLAN_CAL_REQ, MCI_GPM_WLAN_CAL_DONE */
+ MCI_GPM_WLAN_CAL_W_SEQUENCE = 2,
+
+ /* MCI_GPM_COEX_VERSION_QUERY */
+ /* MCI_GPM_COEX_VERSION_RESPONSE */
+ MCI_GPM_COEX_B_MAJOR_VERSION = 6,
+ MCI_GPM_COEX_B_MINOR_VERSION = 7,
+ /* MCI_GPM_COEX_STATUS_QUERY */
+ MCI_GPM_COEX_B_BT_BITMAP = 6,
+ MCI_GPM_COEX_B_WLAN_BITMAP = 7,
+ /* MCI_GPM_COEX_HALT_BT_GPM */
+ MCI_GPM_COEX_B_HALT_STATE = 6,
+ /* MCI_GPM_COEX_WLAN_CHANNELS */
+ MCI_GPM_COEX_B_CHANNEL_MAP = 6,
+ /* MCI_GPM_COEX_BT_PROFILE_INFO */
+ MCI_GPM_COEX_B_PROFILE_TYPE = 6,
+ MCI_GPM_COEX_B_PROFILE_LINKID = 7,
+ MCI_GPM_COEX_B_PROFILE_STATE = 8,
+ MCI_GPM_COEX_B_PROFILE_ROLE = 9,
+ MCI_GPM_COEX_B_PROFILE_RATE = 10,
+ MCI_GPM_COEX_B_PROFILE_VOTYPE = 11,
+ MCI_GPM_COEX_H_PROFILE_T = 12,
+ MCI_GPM_COEX_B_PROFILE_W = 14,
+ MCI_GPM_COEX_B_PROFILE_A = 15,
+ /* MCI_GPM_COEX_BT_STATUS_UPDATE */
+ MCI_GPM_COEX_B_STATUS_TYPE = 6,
+ MCI_GPM_COEX_B_STATUS_LINKID = 7,
+ MCI_GPM_COEX_B_STATUS_STATE = 8,
+ /* MCI_GPM_COEX_BT_UPDATE_FLAGS */
+ MCI_GPM_COEX_W_BT_FLAGS = 6,
+ MCI_GPM_COEX_B_BT_FLAGS_OP = 10
+};
+
+enum mci_gpm_subtype {
+ MCI_GPM_BT_CAL_REQ = 0,
+ MCI_GPM_BT_CAL_GRANT = 1,
+ MCI_GPM_BT_CAL_DONE = 2,
+ MCI_GPM_WLAN_CAL_REQ = 3,
+ MCI_GPM_WLAN_CAL_GRANT = 4,
+ MCI_GPM_WLAN_CAL_DONE = 5,
+ MCI_GPM_COEX_AGENT = 0x0c,
+ MCI_GPM_RSVD_PATTERN = 0xfe,
+ MCI_GPM_RSVD_PATTERN32 = 0xfefefefe,
+ MCI_GPM_BT_DEBUG = 0xff
+};
+
+enum mci_bt_state {
+ MCI_BT_SLEEP,
+ MCI_BT_AWAKE,
+ MCI_BT_CAL_START,
+ MCI_BT_CAL
+};
+
+/* Type of state query */
+enum mci_state_type {
+ MCI_STATE_ENABLE,
+ MCI_STATE_INIT_GPM_OFFSET,
+ MCI_STATE_NEXT_GPM_OFFSET,
+ MCI_STATE_LAST_GPM_OFFSET,
+ MCI_STATE_BT,
+ MCI_STATE_SET_BT_SLEEP,
+ MCI_STATE_SET_BT_AWAKE,
+ MCI_STATE_SET_BT_CAL_START,
+ MCI_STATE_SET_BT_CAL,
+ MCI_STATE_LAST_SCHD_MSG_OFFSET,
+ MCI_STATE_REMOTE_SLEEP,
+ MCI_STATE_CONT_RSSI_POWER,
+ MCI_STATE_CONT_PRIORITY,
+ MCI_STATE_CONT_TXRX,
+ MCI_STATE_RESET_REQ_WAKE,
+ MCI_STATE_SEND_WLAN_COEX_VERSION,
+ MCI_STATE_SET_BT_COEX_VERSION,
+ MCI_STATE_SEND_WLAN_CHANNELS,
+ MCI_STATE_SEND_VERSION_QUERY,
+ MCI_STATE_SEND_STATUS_QUERY,
+ MCI_STATE_NEED_FLUSH_BT_INFO,
+ MCI_STATE_SET_CONCUR_TX_PRI,
+ MCI_STATE_RECOVER_RX,
+ MCI_STATE_NEED_FTP_STOMP,
+ MCI_STATE_NEED_TUNING,
+ MCI_STATE_DEBUG,
+ MCI_STATE_MAX
+};
+
+enum mci_gpm_coex_opcode {
+ MCI_GPM_COEX_VERSION_QUERY,
+ MCI_GPM_COEX_VERSION_RESPONSE,
+ MCI_GPM_COEX_STATUS_QUERY,
+ MCI_GPM_COEX_HALT_BT_GPM,
+ MCI_GPM_COEX_WLAN_CHANNELS,
+ MCI_GPM_COEX_BT_PROFILE_INFO,
+ MCI_GPM_COEX_BT_STATUS_UPDATE,
+ MCI_GPM_COEX_BT_UPDATE_FLAGS
+};
+
+#define MCI_GPM_NOMORE 0
+#define MCI_GPM_MORE 1
+#define MCI_GPM_INVALID 0xffffffff
+
+#define MCI_GPM_RECYCLE(_p_gpm) do { \
+ *(((u32 *)_p_gpm) + MCI_GPM_COEX_W_GPM_PAYLOAD) = \
+ MCI_GPM_RSVD_PATTERN32; \
+} while (0)
+
+#define MCI_GPM_TYPE(_p_gpm) \
+ (*(((u8 *)(_p_gpm)) + MCI_GPM_COEX_B_GPM_TYPE) & 0xff)
+
+#define MCI_GPM_OPCODE(_p_gpm) \
+ (*(((u8 *)(_p_gpm)) + MCI_GPM_COEX_B_GPM_OPCODE) & 0xff)
+
+#define MCI_GPM_SET_CAL_TYPE(_p_gpm, _cal_type) do { \
+ *(((u8 *)(_p_gpm)) + MCI_GPM_COEX_B_GPM_TYPE) = (_cal_type) & 0xff;\
+} while (0)
+
+#define MCI_GPM_SET_TYPE_OPCODE(_p_gpm, _type, _opcode) do { \
+ *(((u8 *)(_p_gpm)) + MCI_GPM_COEX_B_GPM_TYPE) = (_type) & 0xff; \
+ *(((u8 *)(_p_gpm)) + MCI_GPM_COEX_B_GPM_OPCODE) = (_opcode) & 0xff;\
+} while (0)
+
+#define MCI_GPM_IS_CAL_TYPE(_type) ((_type) <= MCI_GPM_WLAN_CAL_DONE)
+
struct ath9k_beacon_state {
u32 bs_nexttbtt;
u32 bs_nextdtim;
@@ -954,7 +1110,6 @@
void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test);
void ath9k_hw_setopmode(struct ath_hw *ah);
void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1);
-void ath9k_hw_setbssidmask(struct ath_hw *ah);
void ath9k_hw_write_associd(struct ath_hw *ah);
u32 ath9k_hw_gettsf32(struct ath_hw *ah);
u64 ath9k_hw_gettsf64(struct ath_hw *ah);
@@ -1047,6 +1202,32 @@
void ath9k_hw_proc_mib_event(struct ath_hw *ah);
void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
+bool ar9003_mci_send_message(struct ath_hw *ah, u8 header, u32 flag,
+ u32 *payload, u8 len, bool wait_done,
+ bool check_bt);
+void ar9003_mci_mute_bt(struct ath_hw *ah);
+u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type, u32 *p_data);
+void ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
+ u16 len, u32 sched_addr);
+void ar9003_mci_cleanup(struct ath_hw *ah);
+void ar9003_mci_send_coex_halt_bt_gpm(struct ath_hw *ah, bool halt,
+ bool wait_done);
+u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
+ u8 gpm_opcode, int time_out);
+void ar9003_mci_2g5g_changed(struct ath_hw *ah, bool is_2g);
+void ar9003_mci_disable_interrupt(struct ath_hw *ah);
+void ar9003_mci_enable_interrupt(struct ath_hw *ah);
+void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
+ bool is_full_sleep);
+bool ar9003_mci_check_int(struct ath_hw *ah, u32 ints);
+void ar9003_mci_remote_reset(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_send_sys_waking(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_send_lna_transfer(struct ath_hw *ah, bool wait_done);
+void ar9003_mci_sync_bt_state(struct ath_hw *ah);
+void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
+ u32 *rx_msg_intr);
+
#define ATH9K_CLOCK_RATE_CCK 22
#define ATH9K_CLOCK_RATE_5GHZ_OFDM 40
#define ATH9K_CLOCK_RATE_2GHZ_OFDM 44
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 5cb0599..c5df981 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -17,6 +17,7 @@
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/ath9k_platform.h>
+#include <linux/module.h>
#include "ath9k.h"
@@ -257,6 +258,8 @@
if (AR_SREV_9330(ah) || AR_SREV_9485(ah))
max_streams = 1;
+ else if (AR_SREV_9462(ah))
+ max_streams = 2;
else if (AR_SREV_9300_20_OR_LATER(ah))
max_streams = 3;
else
@@ -294,9 +297,22 @@
{
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct ath_softc *sc = hw->priv;
- struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
+ int ret;
- return ath_reg_notifier_apply(wiphy, request, reg);
+ ret = ath_reg_notifier_apply(wiphy, request, reg);
+
+ /* Set tx power */
+ if (ah->curchan) {
+ sc->config.txpowlimit = 2 * ah->curchan->chan->max_power;
+ ath9k_ps_wakeup(sc);
+ ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false);
+ sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
+ ath9k_ps_restore(sc);
+ }
+
+ return ret;
}
/*
@@ -407,6 +423,7 @@
static int ath9k_init_btcoex(struct ath_softc *sc)
{
struct ath_txq *txq;
+ struct ath_hw *ah = sc->sc_ah;
int r;
switch (sc->sc_ah->btcoex_hw.scheme) {
@@ -423,8 +440,37 @@
txq = sc->tx.txq_map[WME_AC_BE];
ath9k_hw_init_btcoex_hw(sc->sc_ah, txq->axq_qnum);
sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+ break;
+ case ATH_BTCOEX_CFG_MCI:
+ sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
sc->btcoex.duty_cycle = ATH_BTCOEX_DEF_DUTY_CYCLE;
INIT_LIST_HEAD(&sc->btcoex.mci.info);
+
+ r = ath_mci_setup(sc);
+ if (r)
+ return r;
+
+ if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_MCI) {
+ ah->btcoex_hw.mci.ready = false;
+ ah->btcoex_hw.mci.bt_state = 0;
+ ah->btcoex_hw.mci.bt_ver_major = 3;
+ ah->btcoex_hw.mci.bt_ver_minor = 0;
+ ah->btcoex_hw.mci.bt_version_known = false;
+ ah->btcoex_hw.mci.update_2g5g = true;
+ ah->btcoex_hw.mci.is_2g = true;
+ ah->btcoex_hw.mci.wlan_channels_update = false;
+ ah->btcoex_hw.mci.wlan_channels[0] = 0x00000000;
+ ah->btcoex_hw.mci.wlan_channels[1] = 0xffffffff;
+ ah->btcoex_hw.mci.wlan_channels[2] = 0xffffffff;
+ ah->btcoex_hw.mci.wlan_channels[3] = 0x7fffffff;
+ ah->btcoex_hw.mci.query_bt = true;
+ ah->btcoex_hw.mci.unhalt_bt_gpm = true;
+ ah->btcoex_hw.mci.halted_bt_gpm = false;
+ ah->btcoex_hw.mci.need_flush_btinfo = false;
+ ah->btcoex_hw.mci.wlan_cal_seq = 0;
+ ah->btcoex_hw.mci.wlan_cal_done = 0;
+ ah->btcoex_hw.mci.config = 0x2201;
+ }
break;
default:
WARN_ON(1);
@@ -838,6 +884,9 @@
sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
ath_gen_timer_free(sc->sc_ah, sc->btcoex.no_stomp_timer);
+ if (sc->sc_ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_MCI)
+ ath_mci_cleanup(sc);
+
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
if (ATH_TXQ_SETUP(sc, i))
ath_tx_cleanupq(sc, &sc->tx.txq[i]);
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 6a8fdf3..0e4fbb3 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -16,6 +16,7 @@
#include "hw.h"
#include "hw-ops.h"
+#include <linux/export.h>
static void ath9k_hw_set_txq_interrupts(struct ath_hw *ah,
struct ath9k_tx_queue_info *qi)
@@ -759,7 +760,10 @@
return true;
host_isr = REG_READ(ah, AR_INTR_ASYNC_CAUSE);
- if ((host_isr & AR_INTR_MAC_IRQ) && (host_isr != AR_INTR_SPURIOUS))
+
+ if (((host_isr & AR_INTR_MAC_IRQ) ||
+ (host_isr & AR_INTR_ASYNC_MASK_MCI)) &&
+ (host_isr != AR_INTR_SPURIOUS))
return true;
host_isr = REG_READ(ah, AR_INTR_SYNC_CAUSE);
@@ -797,6 +801,7 @@
{
struct ath_common *common = ath9k_hw_common(ah);
u32 sync_default = AR_INTR_SYNC_DEFAULT;
+ u32 async_mask;
if (!(ah->imask & ATH9K_INT_GLOBAL))
return;
@@ -811,13 +816,16 @@
if (AR_SREV_9340(ah))
sync_default &= ~AR_INTR_SYNC_HOST1_FATAL;
+ async_mask = AR_INTR_MAC_IRQ;
+
+ if (ah->imask & ATH9K_INT_MCI)
+ async_mask |= AR_INTR_ASYNC_MASK_MCI;
+
ath_dbg(common, ATH_DBG_INTERRUPT, "enable IER\n");
REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
if (!AR_SREV_9100(ah)) {
- REG_WRITE(ah, AR_INTR_ASYNC_ENABLE,
- AR_INTR_MAC_IRQ);
- REG_WRITE(ah, AR_INTR_ASYNC_MASK, AR_INTR_MAC_IRQ);
-
+ REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, async_mask);
+ REG_WRITE(ah, AR_INTR_ASYNC_MASK, async_mask);
REG_WRITE(ah, AR_INTR_SYNC_ENABLE, sync_default);
REG_WRITE(ah, AR_INTR_SYNC_MASK, sync_default);
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index e43c41c..7fbc4bd 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -118,7 +118,7 @@
if (--sc->ps_usecount != 0)
goto unlock;
- if (sc->ps_idle)
+ if (sc->ps_idle && (sc->ps_flags & PS_WAIT_FOR_TX_ACK))
mode = ATH9K_PM_FULL_SLEEP;
else if (sc->ps_enabled &&
!(sc->ps_flags & (PS_WAIT_FOR_BEACON |
@@ -286,7 +286,7 @@
ath_start_ani(common);
}
- if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) {
+ if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) {
struct ath_hw_antcomb_conf div_ant_conf;
u8 lna_conf;
@@ -332,7 +332,8 @@
hchan = ah->curchan;
}
- if (fastcc && !ath9k_hw_check_alive(ah))
+ if (fastcc && (ah->chip_fullsleep ||
+ !ath9k_hw_check_alive(ah)))
fastcc = false;
if (!ath_prepare_reset(sc, retry_tx, flush))
@@ -561,7 +562,6 @@
/* Long calibration runs independently of short calibration. */
if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
longcal = true;
- ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
common->ani.longcal_timer = timestamp;
}
@@ -569,8 +569,6 @@
if (!common->ani.caldone) {
if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
shortcal = true;
- ath_dbg(common, ATH_DBG_ANI,
- "shortcal @%lu\n", jiffies);
common->ani.shortcal_timer = timestamp;
common->ani.resetcal_timer = timestamp;
}
@@ -584,8 +582,9 @@
}
/* Verify whether we must check ANI */
- if ((timestamp - common->ani.checkani_timer) >=
- ah->config.ani_poll_interval) {
+ if (sc->sc_ah->config.enable_ani
+ && (timestamp - common->ani.checkani_timer) >=
+ ah->config.ani_poll_interval) {
aniflag = true;
common->ani.checkani_timer = timestamp;
}
@@ -605,6 +604,11 @@
ah->rxchainmask, longcal);
}
+ ath_dbg(common, ATH_DBG_ANI,
+ "Calibration @%lu finished: %s %s %s, caldone: %s\n", jiffies,
+ longcal ? "long" : "", shortcal ? "short" : "",
+ aniflag ? "ani" : "", common->ani.caldone ? "true" : "false");
+
ath9k_ps_restore(sc);
set_timer:
@@ -640,9 +644,9 @@
spin_lock(&sc->nodes_lock);
list_add(&an->list, &sc->nodes);
spin_unlock(&sc->nodes_lock);
+#endif
an->sta = sta;
an->vif = vif;
-#endif
if (sc->sc_flags & SC_OP_TXAGGR) {
ath_tx_node_init(sc, an);
an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
@@ -742,6 +746,9 @@
if (status & ATH9K_INT_GENTIMER)
ath_gen_timer_isr(sc->sc_ah);
+ if (status & ATH9K_INT_MCI)
+ ath_mci_intr(sc);
+
out:
/* re-enable hardware interrupt */
ath9k_hw_enable_interrupts(ah);
@@ -764,7 +771,8 @@
ATH9K_INT_BMISS | \
ATH9K_INT_CST | \
ATH9K_INT_TSFOOR | \
- ATH9K_INT_GENTIMER)
+ ATH9K_INT_GENTIMER | \
+ ATH9K_INT_MCI)
struct ath_softc *sc = dev;
struct ath_hw *ah = sc->sc_ah;
@@ -882,82 +890,6 @@
#undef SCHED_INTR
}
-static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ieee80211_channel *channel = hw->conf.channel;
- int r;
-
- ath9k_ps_wakeup(sc);
- spin_lock_bh(&sc->sc_pcu_lock);
- atomic_set(&ah->intr_ref_cnt, -1);
-
- ath9k_hw_configpcipowersave(ah, false);
-
- if (!ah->curchan)
- ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);
-
- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
- if (r) {
- ath_err(common,
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- }
-
- ath_complete_reset(sc, true);
-
- /* Enable LED */
- ath9k_hw_cfg_output(ah, ah->led_pin,
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(ah, ah->led_pin, 0);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
-
- ath9k_ps_restore(sc);
-}
-
-void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ieee80211_channel *channel = hw->conf.channel;
- int r;
-
- ath9k_ps_wakeup(sc);
-
- ath_cancel_work(sc);
-
- spin_lock_bh(&sc->sc_pcu_lock);
-
- /*
- * Keep the LED on when the radio is disabled
- * during idle unassociated state.
- */
- if (!sc->ps_idle) {
- ath9k_hw_set_gpio(ah, ah->led_pin, 1);
- ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
- }
-
- ath_prepare_reset(sc, false, true);
-
- if (!ah->curchan)
- ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
- r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
- if (r) {
- ath_err(ath9k_hw_common(sc->sc_ah),
- "Unable to reset channel (%u MHz), reset status %d\n",
- channel->center_freq, r);
- }
-
- ath9k_hw_phy_disable(ah);
-
- ath9k_hw_configpcipowersave(ah, true);
-
- spin_unlock_bh(&sc->sc_pcu_lock);
- ath9k_ps_restore(sc);
-}
-
static int ath_reset(struct ath_softc *sc, bool retry_tx)
{
int r;
@@ -1093,6 +1025,9 @@
* and then setup of the interrupt mask.
*/
spin_lock_bh(&sc->sc_pcu_lock);
+
+ atomic_set(&ah->intr_ref_cnt, -1);
+
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
ath_err(common,
@@ -1119,6 +1054,9 @@
if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
ah->imask |= ATH9K_INT_CST;
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_MCI)
+ ah->imask |= ATH9K_INT_MCI;
+
sc->sc_flags &= ~SC_OP_INVALID;
sc->sc_ah->is_monitoring = false;
@@ -1131,6 +1069,18 @@
goto mutex_unlock;
}
+ if (ah->led_pin >= 0) {
+ ath9k_hw_cfg_output(ah, ah->led_pin,
+ AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+ ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+ }
+
+ /*
+ * Reset key cache to sane defaults (all entries cleared) instead of
+ * semi-random values after suspend/resume.
+ */
+ ath9k_cmn_init_crypto(sc->sc_ah);
+
spin_unlock_bh(&sc->sc_pcu_lock);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
@@ -1176,6 +1126,13 @@
}
}
+ /*
+ * Cannot tx while the hardware is in full sleep, it first needs a full
+ * chip reset to recover from that
+ */
+ if (unlikely(sc->sc_ah->power_mode == ATH9K_PM_FULL_SLEEP))
+ goto exit;
+
if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
/*
* We are using PS-Poll and mac80211 can request TX while in
@@ -1222,6 +1179,7 @@
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
+ bool prev_idle;
mutex_lock(&sc->mutex);
@@ -1252,21 +1210,6 @@
* before setting the invalid flag. */
ath9k_hw_disable_interrupts(ah);
- if (!(sc->sc_flags & SC_OP_INVALID)) {
- ath_drain_all_txq(sc, false);
- ath_stoprecv(sc);
- ath9k_hw_phy_disable(ah);
- } else
- sc->rx.rxlink = NULL;
-
- if (sc->rx.frag) {
- dev_kfree_skb_any(sc->rx.frag);
- sc->rx.frag = NULL;
- }
-
- /* disable HAL and put h/w to sleep */
- ath9k_hw_disable(ah);
-
spin_unlock_bh(&sc->sc_pcu_lock);
/* we can now sync irq and kill any running tasklets, since we already
@@ -1275,12 +1218,37 @@
tasklet_kill(&sc->intr_tq);
tasklet_kill(&sc->bcon_tasklet);
+ prev_idle = sc->ps_idle;
+ sc->ps_idle = true;
+
+ spin_lock_bh(&sc->sc_pcu_lock);
+
+ if (ah->led_pin >= 0) {
+ ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+ ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
+ }
+
+ ath_prepare_reset(sc, false, true);
+
+ if (sc->rx.frag) {
+ dev_kfree_skb_any(sc->rx.frag);
+ sc->rx.frag = NULL;
+ }
+
+ if (!ah->curchan)
+ ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
+
+ ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+ ath9k_hw_phy_disable(ah);
+
+ ath9k_hw_configpcipowersave(ah, true);
+
+ spin_unlock_bh(&sc->sc_pcu_lock);
+
ath9k_ps_restore(sc);
- sc->ps_idle = true;
- ath_radio_disable(sc, hw);
-
sc->sc_flags |= SC_OP_INVALID;
+ sc->ps_idle = prev_idle;
mutex_unlock(&sc->mutex);
@@ -1620,8 +1588,8 @@
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
- bool disable_radio = false;
+ ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
/*
@@ -1632,13 +1600,8 @@
*/
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
- if (!sc->ps_idle) {
- ath_radio_enable(sc, hw);
- ath_dbg(common, ATH_DBG_CONFIG,
- "not-idle: enabling radio\n");
- } else {
- disable_radio = true;
- }
+ if (sc->ps_idle)
+ ath_cancel_work(sc);
}
/*
@@ -1745,18 +1708,12 @@
ath_dbg(common, ATH_DBG_CONFIG,
"Set power: %d\n", conf->power_level);
sc->config.txpowlimit = 2 * conf->power_level;
- ath9k_ps_wakeup(sc);
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
- ath9k_ps_restore(sc);
- }
-
- if (disable_radio) {
- ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
- ath_radio_disable(sc, hw);
}
mutex_unlock(&sc->mutex);
+ ath9k_ps_restore(sc);
return 0;
}
@@ -1916,7 +1873,8 @@
if (ath9k_modparam_nohwcrypt)
return -ENOSPC;
- if (vif->type == NL80211_IFTYPE_ADHOC &&
+ if ((vif->type == NL80211_IFTYPE_ADHOC ||
+ vif->type == NL80211_IFTYPE_MESH_POINT) &&
(key->cipher == WLAN_CIPHER_SUITE_TKIP ||
key->cipher == WLAN_CIPHER_SUITE_CCMP) &&
!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
@@ -2324,9 +2282,6 @@
return;
}
- if (drop)
- timeout = 1;
-
for (j = 0; j < timeout; j++) {
bool npend = false;
@@ -2344,21 +2299,22 @@
}
if (!npend)
- goto out;
+ break;
}
- ath9k_ps_wakeup(sc);
- spin_lock_bh(&sc->sc_pcu_lock);
- drain_txq = ath_drain_all_txq(sc, false);
- spin_unlock_bh(&sc->sc_pcu_lock);
+ if (drop) {
+ ath9k_ps_wakeup(sc);
+ spin_lock_bh(&sc->sc_pcu_lock);
+ drain_txq = ath_drain_all_txq(sc, false);
+ spin_unlock_bh(&sc->sc_pcu_lock);
- if (!drain_txq)
- ath_reset(sc, false);
+ if (!drain_txq)
+ ath_reset(sc, false);
- ath9k_ps_restore(sc);
- ieee80211_wake_queues(hw);
+ ath9k_ps_restore(sc);
+ ieee80211_wake_queues(hw);
+ }
-out:
ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0);
mutex_unlock(&sc->mutex);
}
diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c
index 0fbb141..691bf47 100644
--- a/drivers/net/wireless/ath/ath9k/mci.c
+++ b/drivers/net/wireless/ath/ath9k/mci.c
@@ -14,6 +14,9 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
#include "ath9k.h"
#include "mci.h"
@@ -181,8 +184,58 @@
ath9k_btcoex_timer_resume(sc);
}
-void ath_mci_process_profile(struct ath_softc *sc,
- struct ath_mci_profile_info *info)
+
+static void ath_mci_cal_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 payload[4] = {0, 0, 0, 0};
+
+ switch (opcode) {
+ case MCI_GPM_BT_CAL_REQ:
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI received BT_CAL_REQ\n");
+
+ if (ar9003_mci_state(ah, MCI_STATE_BT, NULL) == MCI_BT_AWAKE) {
+ ar9003_mci_state(ah, MCI_STATE_SET_BT_CAL_START, NULL);
+ ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI State mismatches: %d\n",
+ ar9003_mci_state(ah, MCI_STATE_BT, NULL));
+
+ break;
+
+ case MCI_GPM_BT_CAL_DONE:
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI received BT_CAL_DONE\n");
+
+ if (ar9003_mci_state(ah, MCI_STATE_BT, NULL) == MCI_BT_CAL)
+ ath_dbg(common, ATH_DBG_MCI, "MCI error illegal!\n");
+ else
+ ath_dbg(common, ATH_DBG_MCI, "MCI BT not in CAL state\n");
+
+ break;
+
+ case MCI_GPM_BT_CAL_GRANT:
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI received BT_CAL_GRANT\n");
+
+ /* Send WLAN_CAL_DONE for now */
+ ath_dbg(common, ATH_DBG_MCI, "MCI send WLAN_CAL_DONE\n");
+ MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_DONE);
+ ar9003_mci_send_message(sc->sc_ah, MCI_GPM, 0, payload,
+ 16, false, true);
+ break;
+
+ default:
+ ath_dbg(common, ATH_DBG_MCI, "MCI Unknown GPM CAL message\n");
+ break;
+ }
+}
+
+static void ath_mci_process_profile(struct ath_softc *sc,
+ struct ath_mci_profile_info *info)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_btcoex *btcoex = &sc->btcoex;
@@ -208,8 +261,8 @@
ath_mci_update_scheme(sc);
}
-void ath_mci_process_status(struct ath_softc *sc,
- struct ath_mci_profile_status *status)
+static void ath_mci_process_status(struct ath_softc *sc,
+ struct ath_mci_profile_status *status)
{
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_btcoex *btcoex = &sc->btcoex;
@@ -252,3 +305,369 @@
if (old_num_mgmt != mci->num_mgmt)
ath_mci_update_scheme(sc);
}
+
+static void ath_mci_msg(struct ath_softc *sc, u8 opcode, u8 *rx_payload)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_mci_profile_info profile_info;
+ struct ath_mci_profile_status profile_status;
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ u32 version;
+ u8 major;
+ u8 minor;
+ u32 seq_num;
+
+ switch (opcode) {
+
+ case MCI_GPM_COEX_VERSION_QUERY:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Version Query.\n");
+ version = ar9003_mci_state(ah,
+ MCI_STATE_SEND_WLAN_COEX_VERSION, NULL);
+ break;
+
+ case MCI_GPM_COEX_VERSION_RESPONSE:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Version Response.\n");
+ major = *(rx_payload + MCI_GPM_COEX_B_MAJOR_VERSION);
+ minor = *(rx_payload + MCI_GPM_COEX_B_MINOR_VERSION);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT Coex version: %d.%d\n", major, minor);
+ version = (major << 8) + minor;
+ version = ar9003_mci_state(ah,
+ MCI_STATE_SET_BT_COEX_VERSION, &version);
+ break;
+
+ case MCI_GPM_COEX_STATUS_QUERY:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX Status Query = 0x%02x.\n",
+ *(rx_payload + MCI_GPM_COEX_B_WLAN_BITMAP));
+ ar9003_mci_state(ah,
+ MCI_STATE_SEND_WLAN_CHANNELS, NULL);
+ break;
+
+ case MCI_GPM_COEX_BT_PROFILE_INFO:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM Coex BT profile info\n");
+ memcpy(&profile_info,
+ (rx_payload + MCI_GPM_COEX_B_PROFILE_TYPE), 10);
+
+ if ((profile_info.type == MCI_GPM_COEX_PROFILE_UNKNOWN)
+ || (profile_info.type >=
+ MCI_GPM_COEX_PROFILE_MAX)) {
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "illegal profile type = %d,"
+ "state = %d\n", profile_info.type,
+ profile_info.start);
+ break;
+ }
+
+ ath_mci_process_profile(sc, &profile_info);
+ break;
+
+ case MCI_GPM_COEX_BT_STATUS_UPDATE:
+ profile_status.is_link = *(rx_payload +
+ MCI_GPM_COEX_B_STATUS_TYPE);
+ profile_status.conn_handle = *(rx_payload +
+ MCI_GPM_COEX_B_STATUS_LINKID);
+ profile_status.is_critical = *(rx_payload +
+ MCI_GPM_COEX_B_STATUS_STATE);
+
+ seq_num = *((u32 *)(rx_payload + 12));
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Recv GPM COEX BT_Status_Update: "
+ "is_link=%d, linkId=%d, state=%d, SEQ=%d\n",
+ profile_status.is_link, profile_status.conn_handle,
+ profile_status.is_critical, seq_num);
+
+ ath_mci_process_status(sc, &profile_status);
+ break;
+
+ default:
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Unknown GPM COEX message = 0x%02x\n", opcode);
+ break;
+ }
+}
+
+static int ath_mci_buf_alloc(struct ath_softc *sc, struct ath_mci_buf *buf)
+{
+ int error = 0;
+
+ buf->bf_addr = dma_alloc_coherent(sc->dev, buf->bf_len,
+ &buf->bf_paddr, GFP_KERNEL);
+
+ if (buf->bf_addr == NULL) {
+ error = -ENOMEM;
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ memset(buf, 0, sizeof(*buf));
+ return error;
+}
+
+static void ath_mci_buf_free(struct ath_softc *sc, struct ath_mci_buf *buf)
+{
+ if (buf->bf_addr) {
+ dma_free_coherent(sc->dev, buf->bf_len, buf->bf_addr,
+ buf->bf_paddr);
+ memset(buf, 0, sizeof(*buf));
+ }
+}
+
+int ath_mci_setup(struct ath_softc *sc)
+{
+ struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+ struct ath_mci_coex *mci = &sc->mci_coex;
+ int error = 0;
+
+ mci->sched_buf.bf_len = ATH_MCI_SCHED_BUF_SIZE + ATH_MCI_GPM_BUF_SIZE;
+
+ if (ath_mci_buf_alloc(sc, &mci->sched_buf)) {
+ ath_dbg(common, ATH_DBG_FATAL, "MCI buffer alloc failed\n");
+ error = -ENOMEM;
+ goto fail;
+ }
+
+ mci->sched_buf.bf_len = ATH_MCI_SCHED_BUF_SIZE;
+
+ memset(mci->sched_buf.bf_addr, MCI_GPM_RSVD_PATTERN,
+ mci->sched_buf.bf_len);
+
+ mci->gpm_buf.bf_len = ATH_MCI_GPM_BUF_SIZE;
+ mci->gpm_buf.bf_addr = (u8 *)mci->sched_buf.bf_addr +
+ mci->sched_buf.bf_len;
+ mci->gpm_buf.bf_paddr = mci->sched_buf.bf_paddr + mci->sched_buf.bf_len;
+
+ /* initialize the buffer */
+ memset(mci->gpm_buf.bf_addr, MCI_GPM_RSVD_PATTERN, mci->gpm_buf.bf_len);
+
+ ar9003_mci_setup(sc->sc_ah, mci->gpm_buf.bf_paddr,
+ mci->gpm_buf.bf_addr, (mci->gpm_buf.bf_len >> 4),
+ mci->sched_buf.bf_paddr);
+fail:
+ return error;
+}
+
+void ath_mci_cleanup(struct ath_softc *sc)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_mci_coex *mci = &sc->mci_coex;
+
+ /*
+ * both schedule and gpm buffers will be released
+ */
+ ath_mci_buf_free(sc, &mci->sched_buf);
+ ar9003_mci_cleanup(ah);
+}
+
+void ath_mci_intr(struct ath_softc *sc)
+{
+ struct ath_mci_coex *mci = &sc->mci_coex;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+ u32 mci_int, mci_int_rxmsg;
+ u32 offset, subtype, opcode;
+ u32 *pgpm;
+ u32 more_data = MCI_GPM_MORE;
+ bool skip_gpm = false;
+
+ ar9003_mci_get_interrupt(sc->sc_ah, &mci_int, &mci_int_rxmsg);
+
+ if (ar9003_mci_state(ah, MCI_STATE_ENABLE, NULL) == 0) {
+
+ ar9003_mci_state(sc->sc_ah, MCI_STATE_INIT_GPM_OFFSET, NULL);
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI interrupt but MCI disabled\n");
+
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI interrupt: intr = 0x%x, intr_rxmsg = 0x%x\n",
+ mci_int, mci_int_rxmsg);
+ return;
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE) {
+ u32 payload[4] = { 0xffffffff, 0xffffffff,
+ 0xffffffff, 0xffffff00};
+
+ /*
+ * The following REMOTE_RESET and SYS_WAKING used to sent
+ * only when BT wake up. Now they are always sent, as a
+ * recovery method to reset BT MCI's RX alignment.
+ */
+ ath_dbg(common, ATH_DBG_MCI, "MCI interrupt send REMOTE_RESET\n");
+
+ ar9003_mci_send_message(ah, MCI_REMOTE_RESET, 0,
+ payload, 16, true, false);
+ ath_dbg(common, ATH_DBG_MCI, "MCI interrupt send SYS_WAKING\n");
+ ar9003_mci_send_message(ah, MCI_SYS_WAKING, 0,
+ NULL, 0, true, false);
+
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE;
+ ar9003_mci_state(ah, MCI_STATE_RESET_REQ_WAKE, NULL);
+
+ /*
+ * always do this for recovery and 2G/5G toggling and LNA_TRANS
+ */
+ ath_dbg(common, ATH_DBG_MCI, "MCI Set BT state to AWAKE.\n");
+ ar9003_mci_state(ah, MCI_STATE_SET_BT_AWAKE, NULL);
+ }
+
+ /* Processing SYS_WAKING/SYS_SLEEPING */
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING) {
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING;
+
+ if (ar9003_mci_state(ah, MCI_STATE_BT, NULL) == MCI_BT_SLEEP) {
+
+ if (ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP, NULL)
+ == MCI_BT_SLEEP)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT stays in sleep mode\n");
+ else {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI Set BT state to AWAKE.\n");
+ ar9003_mci_state(ah,
+ MCI_STATE_SET_BT_AWAKE, NULL);
+ }
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT stays in AWAKE mode.\n");
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING) {
+
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING;
+
+ if (ar9003_mci_state(ah, MCI_STATE_BT, NULL) == MCI_BT_AWAKE) {
+
+ if (ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP, NULL)
+ == MCI_BT_AWAKE)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT stays in AWAKE mode.\n");
+ else {
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI SetBT state to SLEEP\n");
+ ar9003_mci_state(ah, MCI_STATE_SET_BT_SLEEP,
+ NULL);
+ }
+ } else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI BT stays in SLEEP mode\n");
+ }
+
+ if ((mci_int & AR_MCI_INTERRUPT_RX_INVALID_HDR) ||
+ (mci_int & AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT)) {
+
+ ath_dbg(common, ATH_DBG_MCI, "MCI RX broken, skip GPM msgs\n");
+ ar9003_mci_state(ah, MCI_STATE_RECOVER_RX, NULL);
+ skip_gpm = true;
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO) {
+
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO;
+ offset = ar9003_mci_state(ah, MCI_STATE_LAST_SCHD_MSG_OFFSET,
+ NULL);
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_GPM) {
+
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_GPM;
+
+ while (more_data == MCI_GPM_MORE) {
+
+ pgpm = mci->gpm_buf.bf_addr;
+ offset = ar9003_mci_state(ah,
+ MCI_STATE_NEXT_GPM_OFFSET, &more_data);
+
+ if (offset == MCI_GPM_INVALID)
+ break;
+
+ pgpm += (offset >> 2);
+
+ /*
+ * The first dword is timer.
+ * The real data starts from 2nd dword.
+ */
+
+ subtype = MCI_GPM_TYPE(pgpm);
+ opcode = MCI_GPM_OPCODE(pgpm);
+
+ if (!skip_gpm) {
+
+ if (MCI_GPM_IS_CAL_TYPE(subtype))
+ ath_mci_cal_msg(sc, subtype,
+ (u8 *) pgpm);
+ else {
+ switch (subtype) {
+ case MCI_GPM_COEX_AGENT:
+ ath_mci_msg(sc, opcode,
+ (u8 *) pgpm);
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ MCI_GPM_RECYCLE(pgpm);
+ }
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_HW_MSG_MASK) {
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL)
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL;
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_LNA_INFO) {
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_LNA_INFO;
+ ath_dbg(common, ATH_DBG_MCI, "MCI LNA_INFO\n");
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_CONT_INFO) {
+
+ int value_dbm = ar9003_mci_state(ah,
+ MCI_STATE_CONT_RSSI_POWER, NULL);
+
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_CONT_INFO;
+
+ if (ar9003_mci_state(ah, MCI_STATE_CONT_TXRX, NULL))
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI CONT_INFO: "
+ "(tx) pri = %d, pwr = %d dBm\n",
+ ar9003_mci_state(ah,
+ MCI_STATE_CONT_PRIORITY, NULL),
+ value_dbm);
+ else
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI CONT_INFO:"
+ "(rx) pri = %d,pwr = %d dBm\n",
+ ar9003_mci_state(ah,
+ MCI_STATE_CONT_PRIORITY, NULL),
+ value_dbm);
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_CONT_NACK) {
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_CONT_NACK;
+ ath_dbg(common, ATH_DBG_MCI, "MCI CONT_NACK\n");
+ }
+
+ if (mci_int_rxmsg & AR_MCI_INTERRUPT_RX_MSG_CONT_RST) {
+ mci_int_rxmsg &= ~AR_MCI_INTERRUPT_RX_MSG_CONT_RST;
+ ath_dbg(common, ATH_DBG_MCI, "MCI CONT_RST\n");
+ }
+ }
+
+ if ((mci_int & AR_MCI_INTERRUPT_RX_INVALID_HDR) ||
+ (mci_int & AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT))
+ mci_int &= ~(AR_MCI_INTERRUPT_RX_INVALID_HDR |
+ AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT);
+
+ if (mci_int_rxmsg & 0xfffffffe)
+ ath_dbg(common, ATH_DBG_MCI,
+ "MCI not processed mci_int_rxmsg = 0x%x\n",
+ mci_int_rxmsg);
+}
diff --git a/drivers/net/wireless/ath/ath9k/mci.h b/drivers/net/wireless/ath/ath9k/mci.h
index 9590c61..29e3e51 100644
--- a/drivers/net/wireless/ath/ath9k/mci.h
+++ b/drivers/net/wireless/ath/ath9k/mci.h
@@ -17,6 +17,9 @@
#ifndef MCI_H
#define MCI_H
+#define ATH_MCI_SCHED_BUF_SIZE (16 * 16) /* 16 entries, 4 dword each */
+#define ATH_MCI_GPM_MAX_ENTRY 16
+#define ATH_MCI_GPM_BUF_SIZE (ATH_MCI_GPM_MAX_ENTRY * 16)
#define ATH_MCI_DEF_BT_PERIOD 40
#define ATH_MCI_BDR_DUTY_CYCLE 20
#define ATH_MCI_MAX_DUTY_CYCLE 90
@@ -110,9 +113,22 @@
u8 num_bdr;
};
+
+struct ath_mci_buf {
+ void *bf_addr; /* virtual addr of desc */
+ dma_addr_t bf_paddr; /* physical addr of buffer */
+ u32 bf_len; /* len of data */
+};
+
+struct ath_mci_coex {
+ atomic_t mci_cal_flag;
+ struct ath_mci_buf sched_buf;
+ struct ath_mci_buf gpm_buf;
+ u32 bt_cal_start;
+};
+
void ath_mci_flush_profile(struct ath_mci_profile *mci);
-void ath_mci_process_profile(struct ath_softc *sc,
- struct ath_mci_profile_info *info);
-void ath_mci_process_status(struct ath_softc *sc,
- struct ath_mci_profile_status *status);
+int ath_mci_setup(struct ath_softc *sc);
+void ath_mci_cleanup(struct ath_softc *sc);
+void ath_mci_intr(struct ath_softc *sc);
#endif
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index edb0b4b..a439edc 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -18,6 +18,7 @@
#include <linux/pci.h>
#include <linux/pci-aspm.h>
#include <linux/ath9k_platform.h>
+#include <linux/module.h>
#include "ath9k.h"
static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
@@ -306,12 +307,11 @@
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_softc *sc = hw->priv;
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
-
/* The device has to be moved to FULLSLEEP forcibly.
* Otherwise the chip never moved to full sleep,
* when no interface is up.
*/
+ ath9k_hw_disable(sc->sc_ah);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
return 0;
@@ -320,8 +320,6 @@
static int ath_pci_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
- struct ieee80211_hw *hw = pci_get_drvdata(pdev);
- struct ath_softc *sc = hw->priv;
u32 val;
/*
@@ -333,22 +331,6 @@
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
- ath9k_ps_wakeup(sc);
- /* Enable LED */
- ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
- AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
- ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
-
- /*
- * Reset key cache to sane defaults (all entries cleared) instead of
- * semi-random values after suspend/resume.
- */
- ath9k_cmn_init_crypto(sc->sc_ah);
- ath9k_ps_restore(sc);
-
- sc->ps_idle = true;
- ath_radio_disable(sc, hw);
-
return 0;
}
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 8448281..528d5f3 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -16,6 +16,7 @@
*/
#include <linux/slab.h>
+#include <linux/export.h>
#include "ath9k.h"
@@ -1270,7 +1271,9 @@
ath_rc_priv->max_valid_rate = k;
ath_rc_sort_validrates(rate_table, ath_rc_priv);
- ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
+ ath_rc_priv->rate_max_phy = (k > 4) ?
+ ath_rc_priv->valid_rate_index[k-4] :
+ ath_rc_priv->valid_rate_index[k-1];
ath_rc_priv->rate_table = rate_table;
ath_dbg(common, ATH_DBG_CONFIG,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 67b862c..ad5176d 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -475,7 +475,6 @@
return rfilt;
-#undef RX_FILTER_PRESERVE
}
int ath_startrecv(struct ath_softc *sc)
@@ -1824,6 +1823,7 @@
hdr = (struct ieee80211_hdr *) (hdr_skb->data + rx_status_len);
rxs = IEEE80211_SKB_RXCB(hdr_skb);
if (ieee80211_is_beacon(hdr->frame_control) &&
+ !is_zero_ether_addr(common->curbssid) &&
!compare_ether_addr(hdr->addr3, common->curbssid))
rs.is_mybeacon = true;
else
@@ -1838,11 +1838,6 @@
if (sc->sc_flags & SC_OP_RXFLUSH)
goto requeue_drop_frag;
- retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs,
- rxs, &decrypt_error);
- if (retval)
- goto requeue_drop_frag;
-
rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp;
if (rs.rs_tstamp > tsf_lower &&
unlikely(rs.rs_tstamp - tsf_lower > 0x10000000))
@@ -1852,6 +1847,11 @@
unlikely(tsf_lower - rs.rs_tstamp > 0x10000000))
rxs->mactime += 0x100000000ULL;
+ retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs,
+ rxs, &decrypt_error);
+ if (retval)
+ goto requeue_drop_frag;
+
/* Ensure we always have an skb to requeue once we are done
* processing the current buffer's skb */
requeue_skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_ATOMIC);
@@ -1923,15 +1923,20 @@
skb = hdr_skb;
}
- /*
- * change the default rx antenna if rx diversity chooses the
- * other antenna 3 times in a row.
- */
- if (sc->rx.defant != rs.rs_antenna) {
- if (++sc->rx.rxotherant >= 3)
- ath_setdefantenna(sc, rs.rs_antenna);
- } else {
- sc->rx.rxotherant = 0;
+
+ if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) {
+
+ /*
+ * change the default rx antenna if rx diversity
+ * chooses the other antenna 3 times in a row.
+ */
+ if (sc->rx.defant != rs.rs_antenna) {
+ if (++sc->rx.rxotherant >= 3)
+ ath_setdefantenna(sc, rs.rs_antenna);
+ } else {
+ sc->rx.rxotherant = 0;
+ }
+
}
if (rxs->flag & RX_FLAG_MMIC_STRIPPED)
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 4591097..6e2f188 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -1006,6 +1006,8 @@
#define AR_INTR_ASYNC_MASK (AR_SREV_9340(ah) ? 0x4018 : 0x4030)
#define AR_INTR_ASYNC_MASK_GPIO 0xFFFC0000
#define AR_INTR_ASYNC_MASK_GPIO_S 18
+#define AR_INTR_ASYNC_MASK_MCI 0x00000080
+#define AR_INTR_ASYNC_MASK_MCI_S 7
#define AR_INTR_SYNC_MASK (AR_SREV_9340(ah) ? 0x401c : 0x4034)
#define AR_INTR_SYNC_MASK_GPIO 0xFFFC0000
@@ -1013,6 +1015,14 @@
#define AR_INTR_ASYNC_CAUSE_CLR (AR_SREV_9340(ah) ? 0x4020 : 0x4038)
#define AR_INTR_ASYNC_CAUSE (AR_SREV_9340(ah) ? 0x4020 : 0x4038)
+#define AR_INTR_ASYNC_CAUSE_MCI 0x00000080
+#define AR_INTR_ASYNC_USED (AR_INTR_MAC_IRQ | \
+ AR_INTR_ASYNC_CAUSE_MCI)
+
+/* Asynchronous Interrupt Enable Register */
+#define AR_INTR_ASYNC_ENABLE_MCI 0x00000080
+#define AR_INTR_ASYNC_ENABLE_MCI_S 7
+
#define AR_INTR_ASYNC_ENABLE (AR_SREV_9340(ah) ? 0x4024 : 0x403c)
#define AR_INTR_ASYNC_ENABLE_GPIO 0xFFFC0000
@@ -1269,6 +1279,8 @@
#define AR_RTC_INTR_MASK \
((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0058) : 0x7058)
+#define AR_RTC_KEEP_AWAKE 0x7034
+
/* RTC_DERIVED_* - only for AR9100 */
#define AR_RTC_DERIVED_CLK \
@@ -1555,6 +1567,8 @@
#define AR_DIAG_FRAME_NV0 0x00020000
#define AR_DIAG_OBS_PT_SEL1 0x000C0000
#define AR_DIAG_OBS_PT_SEL1_S 18
+#define AR_DIAG_OBS_PT_SEL2 0x08000000
+#define AR_DIAG_OBS_PT_SEL2_S 27
#define AR_DIAG_FORCE_RX_CLEAR 0x00100000 /* force rx_clear high */
#define AR_DIAG_IGNORE_VIRT_CS 0x00200000
#define AR_DIAG_FORCE_CH_IDLE_HIGH 0x00400000
@@ -1929,37 +1943,277 @@
#define AR_PHY_AGC_CONTROL_YCOK_MAX_S 6
/* MCI Registers */
-#define AR_MCI_INTERRUPT_RX_MSG_EN 0x183c
-#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET 0x00000001
-#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET_S 0
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL 0x00000002
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL_S 1
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK 0x00000004
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK_S 2
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO 0x00000008
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO_S 3
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST 0x00000010
-#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST_S 4
-#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO 0x00000020
-#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO_S 5
-#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT 0x00000040
-#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT_S 6
-#define AR_MCI_INTERRUPT_RX_MSG_GPM 0x00000100
-#define AR_MCI_INTERRUPT_RX_MSG_GPM_S 8
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO 0x00000200
-#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO_S 9
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING 0x00000400
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING_S 10
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING 0x00000800
-#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING_S 11
-#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE 0x00001000
-#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE_S 12
-#define AR_MCI_INTERRUPT_RX_HW_MSG_MASK (AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO | \
+
+#define AR_MCI_COMMAND0 0x1800
+#define AR_MCI_COMMAND0_HEADER 0xFF
+#define AR_MCI_COMMAND0_HEADER_S 0
+#define AR_MCI_COMMAND0_LEN 0x1f00
+#define AR_MCI_COMMAND0_LEN_S 8
+#define AR_MCI_COMMAND0_DISABLE_TIMESTAMP 0x2000
+#define AR_MCI_COMMAND0_DISABLE_TIMESTAMP_S 13
+
+#define AR_MCI_COMMAND1 0x1804
+
+#define AR_MCI_COMMAND2 0x1808
+#define AR_MCI_COMMAND2_RESET_TX 0x01
+#define AR_MCI_COMMAND2_RESET_TX_S 0
+#define AR_MCI_COMMAND2_RESET_RX 0x02
+#define AR_MCI_COMMAND2_RESET_RX_S 1
+#define AR_MCI_COMMAND2_RESET_RX_NUM_CYCLES 0x3FC
+#define AR_MCI_COMMAND2_RESET_RX_NUM_CYCLES_S 2
+#define AR_MCI_COMMAND2_RESET_REQ_WAKEUP 0x400
+#define AR_MCI_COMMAND2_RESET_REQ_WAKEUP_S 10
+
+#define AR_MCI_RX_CTRL 0x180c
+
+#define AR_MCI_TX_CTRL 0x1810
+/* 0 = no division, 1 = divide by 2, 2 = divide by 4, 3 = divide by 8 */
+#define AR_MCI_TX_CTRL_CLK_DIV 0x03
+#define AR_MCI_TX_CTRL_CLK_DIV_S 0
+#define AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE 0x04
+#define AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE_S 2
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_FREQ 0xFFFFF8
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_FREQ_S 3
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_NUM 0xF000000
+#define AR_MCI_TX_CTRL_GAIN_UPDATE_NUM_S 24
+
+#define AR_MCI_MSG_ATTRIBUTES_TABLE 0x1814
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM 0xFFFF
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM_S 0
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR 0xFFFF0000
+#define AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR_S 16
+
+#define AR_MCI_SCHD_TABLE_0 0x1818
+#define AR_MCI_SCHD_TABLE_1 0x181c
+#define AR_MCI_GPM_0 0x1820
+#define AR_MCI_GPM_1 0x1824
+#define AR_MCI_GPM_WRITE_PTR 0xFFFF0000
+#define AR_MCI_GPM_WRITE_PTR_S 16
+#define AR_MCI_GPM_BUF_LEN 0x0000FFFF
+#define AR_MCI_GPM_BUF_LEN_S 0
+
+#define AR_MCI_INTERRUPT_RAW 0x1828
+#define AR_MCI_INTERRUPT_EN 0x182c
+#define AR_MCI_INTERRUPT_SW_MSG_DONE 0x00000001
+#define AR_MCI_INTERRUPT_SW_MSG_DONE_S 0
+#define AR_MCI_INTERRUPT_CPU_INT_MSG 0x00000002
+#define AR_MCI_INTERRUPT_CPU_INT_MSG_S 1
+#define AR_MCI_INTERRUPT_RX_CKSUM_FAIL 0x00000004
+#define AR_MCI_INTERRUPT_RX_CKSUM_FAIL_S 2
+#define AR_MCI_INTERRUPT_RX_INVALID_HDR 0x00000008
+#define AR_MCI_INTERRUPT_RX_INVALID_HDR_S 3
+#define AR_MCI_INTERRUPT_RX_HW_MSG_FAIL 0x00000010
+#define AR_MCI_INTERRUPT_RX_HW_MSG_FAIL_S 4
+#define AR_MCI_INTERRUPT_RX_SW_MSG_FAIL 0x00000020
+#define AR_MCI_INTERRUPT_RX_SW_MSG_FAIL_S 5
+#define AR_MCI_INTERRUPT_TX_HW_MSG_FAIL 0x00000080
+#define AR_MCI_INTERRUPT_TX_HW_MSG_FAIL_S 7
+#define AR_MCI_INTERRUPT_TX_SW_MSG_FAIL 0x00000100
+#define AR_MCI_INTERRUPT_TX_SW_MSG_FAIL_S 8
+#define AR_MCI_INTERRUPT_RX_MSG 0x00000200
+#define AR_MCI_INTERRUPT_RX_MSG_S 9
+#define AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE 0x00000400
+#define AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE_S 10
+#define AR_MCI_INTERRUPT_BT_PRI 0x07fff800
+#define AR_MCI_INTERRUPT_BT_PRI_S 11
+#define AR_MCI_INTERRUPT_BT_PRI_THRESH 0x08000000
+#define AR_MCI_INTERRUPT_BT_PRI_THRESH_S 27
+#define AR_MCI_INTERRUPT_BT_FREQ 0x10000000
+#define AR_MCI_INTERRUPT_BT_FREQ_S 28
+#define AR_MCI_INTERRUPT_BT_STOMP 0x20000000
+#define AR_MCI_INTERRUPT_BT_STOMP_S 29
+#define AR_MCI_INTERRUPT_BB_AIC_IRQ 0x40000000
+#define AR_MCI_INTERRUPT_BB_AIC_IRQ_S 30
+#define AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT 0x80000000
+#define AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT_S 31
+
+#define AR_MCI_INTERRUPT_DEFAULT (AR_MCI_INTERRUPT_SW_MSG_DONE | \
+ AR_MCI_INTERRUPT_RX_INVALID_HDR | \
+ AR_MCI_INTERRUPT_RX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_RX_SW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_SW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_RX_MSG | \
+ AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE | \
+ AR_MCI_INTERRUPT_CONT_INFO_TIMEOUT)
+
+#define AR_MCI_INTERRUPT_MSG_FAIL_MASK (AR_MCI_INTERRUPT_RX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_RX_SW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_HW_MSG_FAIL | \
+ AR_MCI_INTERRUPT_TX_SW_MSG_FAIL)
+
+#define AR_MCI_REMOTE_CPU_INT 0x1830
+#define AR_MCI_REMOTE_CPU_INT_EN 0x1834
+#define AR_MCI_INTERRUPT_RX_MSG_RAW 0x1838
+#define AR_MCI_INTERRUPT_RX_MSG_EN 0x183c
+#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET 0x00000001
+#define AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET_S 0
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL 0x00000002
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL_S 1
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK 0x00000004
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_NACK_S 2
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO 0x00000008
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_INFO_S 3
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST 0x00000010
+#define AR_MCI_INTERRUPT_RX_MSG_CONT_RST_S 4
+#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO 0x00000020
+#define AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO_S 5
+#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT 0x00000040
+#define AR_MCI_INTERRUPT_RX_MSG_CPU_INT_S 6
+#define AR_MCI_INTERRUPT_RX_MSG_GPM 0x00000100
+#define AR_MCI_INTERRUPT_RX_MSG_GPM_S 8
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO 0x00000200
+#define AR_MCI_INTERRUPT_RX_MSG_LNA_INFO_S 9
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING 0x00000400
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING_S 10
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING 0x00000800
+#define AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING_S 11
+#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE 0x00001000
+#define AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE_S 12
+#define AR_MCI_INTERRUPT_RX_HW_MSG_MASK (AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO | \
AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL| \
AR_MCI_INTERRUPT_RX_MSG_LNA_INFO | \
AR_MCI_INTERRUPT_RX_MSG_CONT_NACK | \
AR_MCI_INTERRUPT_RX_MSG_CONT_INFO | \
AR_MCI_INTERRUPT_RX_MSG_CONT_RST)
+#define AR_MCI_INTERRUPT_RX_MSG_DEFAULT (AR_MCI_INTERRUPT_RX_MSG_GPM | \
+ AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET| \
+ AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING | \
+ AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING| \
+ AR_MCI_INTERRUPT_RX_MSG_SCHD_INFO | \
+ AR_MCI_INTERRUPT_RX_MSG_LNA_CONTROL | \
+ AR_MCI_INTERRUPT_RX_MSG_LNA_INFO | \
+ AR_MCI_INTERRUPT_RX_MSG_CONT_NACK | \
+ AR_MCI_INTERRUPT_RX_MSG_CONT_INFO | \
+ AR_MCI_INTERRUPT_RX_MSG_CONT_RST | \
+ AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
+
+#define AR_MCI_CPU_INT 0x1840
+
+#define AR_MCI_RX_STATUS 0x1844
+#define AR_MCI_RX_LAST_SCHD_MSG_INDEX 0x00000F00
+#define AR_MCI_RX_LAST_SCHD_MSG_INDEX_S 8
+#define AR_MCI_RX_REMOTE_SLEEP 0x00001000
+#define AR_MCI_RX_REMOTE_SLEEP_S 12
+#define AR_MCI_RX_MCI_CLK_REQ 0x00002000
+#define AR_MCI_RX_MCI_CLK_REQ_S 13
+
+#define AR_MCI_CONT_STATUS 0x1848
+#define AR_MCI_CONT_RSSI_POWER 0x000000FF
+#define AR_MCI_CONT_RSSI_POWER_S 0
+#define AR_MCI_CONT_RRIORITY 0x0000FF00
+#define AR_MCI_CONT_RRIORITY_S 8
+#define AR_MCI_CONT_TXRX 0x00010000
+#define AR_MCI_CONT_TXRX_S 16
+
+#define AR_MCI_BT_PRI0 0x184c
+#define AR_MCI_BT_PRI1 0x1850
+#define AR_MCI_BT_PRI2 0x1854
+#define AR_MCI_BT_PRI3 0x1858
+#define AR_MCI_BT_PRI 0x185c
+#define AR_MCI_WL_FREQ0 0x1860
+#define AR_MCI_WL_FREQ1 0x1864
+#define AR_MCI_WL_FREQ2 0x1868
+#define AR_MCI_GAIN 0x186c
+#define AR_MCI_WBTIMER1 0x1870
+#define AR_MCI_WBTIMER2 0x1874
+#define AR_MCI_WBTIMER3 0x1878
+#define AR_MCI_WBTIMER4 0x187c
+#define AR_MCI_MAXGAIN 0x1880
+#define AR_MCI_HW_SCHD_TBL_CTL 0x1884
+#define AR_MCI_HW_SCHD_TBL_D0 0x1888
+#define AR_MCI_HW_SCHD_TBL_D1 0x188c
+#define AR_MCI_HW_SCHD_TBL_D2 0x1890
+#define AR_MCI_HW_SCHD_TBL_D3 0x1894
+#define AR_MCI_TX_PAYLOAD0 0x1898
+#define AR_MCI_TX_PAYLOAD1 0x189c
+#define AR_MCI_TX_PAYLOAD2 0x18a0
+#define AR_MCI_TX_PAYLOAD3 0x18a4
+#define AR_BTCOEX_WBTIMER 0x18a8
+
+#define AR_BTCOEX_CTRL 0x18ac
+#define AR_BTCOEX_CTRL_AR9462_MODE 0x00000001
+#define AR_BTCOEX_CTRL_AR9462_MODE_S 0
+#define AR_BTCOEX_CTRL_WBTIMER_EN 0x00000002
+#define AR_BTCOEX_CTRL_WBTIMER_EN_S 1
+#define AR_BTCOEX_CTRL_MCI_MODE_EN 0x00000004
+#define AR_BTCOEX_CTRL_MCI_MODE_EN_S 2
+#define AR_BTCOEX_CTRL_LNA_SHARED 0x00000008
+#define AR_BTCOEX_CTRL_LNA_SHARED_S 3
+#define AR_BTCOEX_CTRL_PA_SHARED 0x00000010
+#define AR_BTCOEX_CTRL_PA_SHARED_S 4
+#define AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN 0x00000020
+#define AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN_S 5
+#define AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN 0x00000040
+#define AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN_S 6
+#define AR_BTCOEX_CTRL_NUM_ANTENNAS 0x00000180
+#define AR_BTCOEX_CTRL_NUM_ANTENNAS_S 7
+#define AR_BTCOEX_CTRL_RX_CHAIN_MASK 0x00000E00
+#define AR_BTCOEX_CTRL_RX_CHAIN_MASK_S 9
+#define AR_BTCOEX_CTRL_AGGR_THRESH 0x00007000
+#define AR_BTCOEX_CTRL_AGGR_THRESH_S 12
+#define AR_BTCOEX_CTRL_1_CHAIN_BCN 0x00080000
+#define AR_BTCOEX_CTRL_1_CHAIN_BCN_S 19
+#define AR_BTCOEX_CTRL_1_CHAIN_ACK 0x00100000
+#define AR_BTCOEX_CTRL_1_CHAIN_ACK_S 20
+#define AR_BTCOEX_CTRL_WAIT_BA_MARGIN 0x1FE00000
+#define AR_BTCOEX_CTRL_WAIT_BA_MARGIN_S 28
+#define AR_BTCOEX_CTRL_REDUCE_TXPWR 0x20000000
+#define AR_BTCOEX_CTRL_REDUCE_TXPWR_S 29
+#define AR_BTCOEX_CTRL_SPDT_ENABLE_10 0x40000000
+#define AR_BTCOEX_CTRL_SPDT_ENABLE_10_S 30
+#define AR_BTCOEX_CTRL_SPDT_POLARITY 0x80000000
+#define AR_BTCOEX_CTRL_SPDT_POLARITY_S 31
+
+#define AR_BTCOEX_WL_WEIGHTS0 0x18b0
+#define AR_BTCOEX_WL_WEIGHTS1 0x18b4
+#define AR_BTCOEX_WL_WEIGHTS2 0x18b8
+#define AR_BTCOEX_WL_WEIGHTS3 0x18bc
+#define AR_BTCOEX_MAX_TXPWR(_x) (0x18c0 + ((_x) << 2))
+#define AR_BTCOEX_WL_LNA 0x1940
+#define AR_BTCOEX_RFGAIN_CTRL 0x1944
+
+#define AR_BTCOEX_CTRL2 0x1948
+#define AR_BTCOEX_CTRL2_TXPWR_THRESH 0x0007F800
+#define AR_BTCOEX_CTRL2_TXPWR_THRESH_S 11
+#define AR_BTCOEX_CTRL2_TX_CHAIN_MASK 0x00380000
+#define AR_BTCOEX_CTRL2_TX_CHAIN_MASK_S 19
+#define AR_BTCOEX_CTRL2_RX_DEWEIGHT 0x00400000
+#define AR_BTCOEX_CTRL2_RX_DEWEIGHT_S 22
+#define AR_BTCOEX_CTRL2_GPIO_OBS_SEL 0x00800000
+#define AR_BTCOEX_CTRL2_GPIO_OBS_SEL_S 23
+#define AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL 0x01000000
+#define AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL_S 24
+#define AR_BTCOEX_CTRL2_DESC_BASED_TXPWR_ENABLE 0x02000000
+#define AR_BTCOEX_CTRL2_DESC_BASED_TXPWR_ENABLE_S 25
+
+#define AR_BTCOEX_CTRL_SPDT_ENABLE 0x00000001
+#define AR_BTCOEX_CTRL_SPDT_ENABLE_S 0
+#define AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL 0x00000002
+#define AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL_S 1
+#define AR_BTCOEX_CTRL_USE_LATCHED_BT_ANT 0x00000004
+#define AR_BTCOEX_CTRL_USE_LATCHED_BT_ANT_S 2
+#define AR_GLB_WLAN_UART_INTF_EN 0x00020000
+#define AR_GLB_WLAN_UART_INTF_EN_S 17
+#define AR_GLB_DS_JTAG_DISABLE 0x00040000
+#define AR_GLB_DS_JTAG_DISABLE_S 18
+
+#define AR_BTCOEX_RC 0x194c
+#define AR_BTCOEX_MAX_RFGAIN(_x) (0x1950 + ((_x) << 2))
+#define AR_BTCOEX_DBG 0x1a50
+#define AR_MCI_LAST_HW_MSG_HDR 0x1a54
+#define AR_MCI_LAST_HW_MSG_BDY 0x1a58
+
+#define AR_MCI_SCHD_TABLE_2 0x1a5c
+#define AR_MCI_SCHD_TABLE_2_MEM_BASED 0x00000001
+#define AR_MCI_SCHD_TABLE_2_MEM_BASED_S 0
+#define AR_MCI_SCHD_TABLE_2_HW_BASED 0x00000002
+#define AR_MCI_SCHD_TABLE_2_HW_BASED_S 1
+
+#define AR_BTCOEX_CTRL3 0x1a60
+#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT 0x00000fff
+#define AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT_S 0
+
#endif
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 55d077e..23e80e6 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -53,7 +53,7 @@
int tx_flags, struct ath_txq *txq);
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
struct ath_txq *txq, struct list_head *bf_q,
- struct ath_tx_status *ts, int txok, int sendbar);
+ struct ath_tx_status *ts, int txok);
static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
struct list_head *head, bool internal);
static void ath_tx_rc_status(struct ath_softc *sc, struct ath_buf *bf,
@@ -150,6 +150,12 @@
return (struct ath_frame_info *) &tx_info->rate_driver_data[0];
}
+static void ath_send_bar(struct ath_atx_tid *tid, u16 seqno)
+{
+ ieee80211_send_bar(tid->an->vif, tid->an->sta->addr, tid->tidno,
+ seqno << IEEE80211_SEQ_SEQ_SHIFT);
+}
+
static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
{
struct ath_txq *txq = tid->ac->txq;
@@ -158,28 +164,33 @@
struct list_head bf_head;
struct ath_tx_status ts;
struct ath_frame_info *fi;
+ bool sendbar = false;
INIT_LIST_HEAD(&bf_head);
memset(&ts, 0, sizeof(ts));
- spin_lock_bh(&txq->axq_lock);
while ((skb = __skb_dequeue(&tid->buf_q))) {
fi = get_frame_info(skb);
bf = fi->bf;
- spin_unlock_bh(&txq->axq_lock);
if (bf && fi->retries) {
list_add_tail(&bf->list, &bf_head);
ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
- ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 1);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
+ sendbar = true;
} else {
ath_tx_send_normal(sc, txq, NULL, skb);
}
- spin_lock_bh(&txq->axq_lock);
}
- spin_unlock_bh(&txq->axq_lock);
+ if (tid->baw_head == tid->baw_tail) {
+ tid->state &= ~AGGR_ADDBA_COMPLETE;
+ tid->state &= ~AGGR_CLEANUP;
+ }
+
+ if (sendbar)
+ ath_send_bar(tid, tid->seq_start);
}
static void ath_tx_update_baw(struct ath_softc *sc, struct ath_atx_tid *tid,
@@ -195,6 +206,8 @@
while (tid->baw_head != tid->baw_tail && !test_bit(tid->baw_head, tid->tx_buf)) {
INCR(tid->seq_start, IEEE80211_SEQ_MAX);
INCR(tid->baw_head, ATH_TID_MAX_BUFS);
+ if (tid->bar_index >= 0)
+ tid->bar_index--;
}
}
@@ -238,9 +251,7 @@
bf = fi->bf;
if (!bf) {
- spin_unlock(&txq->axq_lock);
ath_tx_complete(sc, skb, ATH_TX_ERROR, txq);
- spin_lock(&txq->axq_lock);
continue;
}
@@ -249,24 +260,26 @@
if (fi->retries)
ath_tx_update_baw(sc, tid, bf->bf_state.seqno);
- spin_unlock(&txq->axq_lock);
- ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
- spin_lock(&txq->axq_lock);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
}
tid->seq_next = tid->seq_start;
tid->baw_tail = tid->baw_head;
+ tid->bar_index = -1;
}
static void ath_tx_set_retry(struct ath_softc *sc, struct ath_txq *txq,
- struct sk_buff *skb)
+ struct sk_buff *skb, int count)
{
struct ath_frame_info *fi = get_frame_info(skb);
struct ath_buf *bf = fi->bf;
struct ieee80211_hdr *hdr;
+ int prev = fi->retries;
TX_STAT_INC(txq->axq_qnum, a_retries);
- if (fi->retries++ > 0)
+ fi->retries += count;
+
+ if (prev > 0)
return;
hdr = (struct ieee80211_hdr *)skb->data;
@@ -365,7 +378,7 @@
struct ath_buf *bf_next, *bf_last = bf->bf_lastbf;
struct list_head bf_head;
struct sk_buff_head bf_pending;
- u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0;
+ u16 seq_st = 0, acked_cnt = 0, txfail_cnt = 0, seq_first;
u32 ba[WME_BA_BMP_SIZE >> 5];
int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
bool rc_update = true;
@@ -374,6 +387,8 @@
int nframes;
u8 tidno;
bool flush = !!(ts->ts_status & ATH9K_TX_FLUSH);
+ int i, retries;
+ int bar_index = -1;
skb = bf->bf_mpdu;
hdr = (struct ieee80211_hdr *)skb->data;
@@ -382,6 +397,10 @@
memcpy(rates, tx_info->control.rates, sizeof(rates));
+ retries = ts->ts_longretry + 1;
+ for (i = 0; i < ts->ts_rateindex; i++)
+ retries += rates[i].count;
+
rcu_read_lock();
sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr1, hdr->addr2);
@@ -395,8 +414,7 @@
if (!bf->bf_stale || bf_next != NULL)
list_move_tail(&bf->list, &bf_head);
- ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
- 0, 0);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, ts, 0);
bf = bf_next;
}
@@ -406,6 +424,7 @@
an = (struct ath_node *)sta->drv_priv;
tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
tid = ATH_AN_2_TID(an, tidno);
+ seq_first = tid->seq_start;
/*
* The hardware occasionally sends a tx status for the wrong TID.
@@ -455,25 +474,25 @@
} else if (!isaggr && txok) {
/* transmit completion */
acked_cnt++;
- } else {
- if ((tid->state & AGGR_CLEANUP) || !retry) {
- /*
- * cleanup in progress, just fail
- * the un-acked sub-frames
- */
- txfail = 1;
- } else if (flush) {
- txpending = 1;
- } else if (fi->retries < ATH_MAX_SW_RETRIES) {
- if (txok || !an->sleeping)
- ath_tx_set_retry(sc, txq, bf->bf_mpdu);
+ } else if ((tid->state & AGGR_CLEANUP) || !retry) {
+ /*
+ * cleanup in progress, just fail
+ * the un-acked sub-frames
+ */
+ txfail = 1;
+ } else if (flush) {
+ txpending = 1;
+ } else if (fi->retries < ATH_MAX_SW_RETRIES) {
+ if (txok || !an->sleeping)
+ ath_tx_set_retry(sc, txq, bf->bf_mpdu,
+ retries);
- txpending = 1;
- } else {
- txfail = 1;
- sendbar = 1;
- txfail_cnt++;
- }
+ txpending = 1;
+ } else {
+ txfail = 1;
+ txfail_cnt++;
+ bar_index = max_t(int, bar_index,
+ ATH_BA_INDEX(seq_first, seqno));
}
/*
@@ -490,9 +509,7 @@
* complete the acked-ones/xretried ones; update
* block-ack window
*/
- spin_lock_bh(&txq->axq_lock);
ath_tx_update_baw(sc, tid, seqno);
- spin_unlock_bh(&txq->axq_lock);
if (rc_update && (acked_cnt == 1 || txfail_cnt == 1)) {
memcpy(tx_info->control.rates, rates, sizeof(rates));
@@ -501,33 +518,30 @@
}
ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
- !txfail, sendbar);
+ !txfail);
} else {
/* retry the un-acked ones */
- if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)) {
- if (bf->bf_next == NULL && bf_last->bf_stale) {
- struct ath_buf *tbf;
+ if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
+ bf->bf_next == NULL && bf_last->bf_stale) {
+ struct ath_buf *tbf;
- tbf = ath_clone_txbuf(sc, bf_last);
- /*
- * Update tx baw and complete the
- * frame with failed status if we
- * run out of tx buf.
- */
- if (!tbf) {
- spin_lock_bh(&txq->axq_lock);
- ath_tx_update_baw(sc, tid, seqno);
- spin_unlock_bh(&txq->axq_lock);
+ tbf = ath_clone_txbuf(sc, bf_last);
+ /*
+ * Update tx baw and complete the
+ * frame with failed status if we
+ * run out of tx buf.
+ */
+ if (!tbf) {
+ ath_tx_update_baw(sc, tid, seqno);
- ath_tx_complete_buf(sc, bf, txq,
- &bf_head,
- ts, 0,
- !flush);
- break;
- }
-
- fi->bf = tbf;
+ ath_tx_complete_buf(sc, bf, txq,
+ &bf_head, ts, 0);
+ bar_index = max_t(int, bar_index,
+ ATH_BA_INDEX(seq_first, seqno));
+ break;
}
+
+ fi->bf = tbf;
}
/*
@@ -540,12 +554,18 @@
bf = bf_next;
}
+ if (bar_index >= 0) {
+ u16 bar_seq = ATH_BA_INDEX2SEQ(seq_first, bar_index);
+ ath_send_bar(tid, ATH_BA_INDEX2SEQ(seq_first, bar_index + 1));
+ if (BAW_WITHIN(tid->seq_start, tid->baw_size, bar_seq))
+ tid->bar_index = ATH_BA_INDEX(tid->seq_start, bar_seq);
+ }
+
/* prepend un-acked frames to the beginning of the pending frame queue */
if (!skb_queue_empty(&bf_pending)) {
if (an->sleeping)
ieee80211_sta_set_buffered(sta, tid->tidno, true);
- spin_lock_bh(&txq->axq_lock);
skb_queue_splice(&bf_pending, &tid->buf_q);
if (!an->sleeping) {
ath_tx_queue_tid(txq, tid);
@@ -553,18 +573,11 @@
if (ts->ts_status & ATH9K_TXERR_FILT)
tid->ac->clear_ps_filter = true;
}
- spin_unlock_bh(&txq->axq_lock);
}
- if (tid->state & AGGR_CLEANUP) {
+ if (tid->state & AGGR_CLEANUP)
ath_tx_flush_tid(sc, tid);
- if (tid->baw_head == tid->baw_tail) {
- tid->state &= ~AGGR_ADDBA_COMPLETE;
- tid->state &= ~AGGR_CLEANUP;
- }
- }
-
rcu_read_unlock();
if (needreset) {
@@ -618,24 +631,26 @@
max_4ms_framelen = ATH_AMPDU_LIMIT_MAX;
for (i = 0; i < 4; i++) {
- if (rates[i].count) {
- int modeidx;
- if (!(rates[i].flags & IEEE80211_TX_RC_MCS)) {
- legacy = 1;
- break;
- }
+ int modeidx;
- if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
- modeidx = MCS_HT40;
- else
- modeidx = MCS_HT20;
+ if (!rates[i].count)
+ continue;
- if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
- modeidx++;
-
- frmlen = ath_max_4ms_framelen[modeidx][rates[i].idx];
- max_4ms_framelen = min(max_4ms_framelen, frmlen);
+ if (!(rates[i].flags & IEEE80211_TX_RC_MCS)) {
+ legacy = 1;
+ break;
}
+
+ if (rates[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
+ modeidx = MCS_HT40;
+ else
+ modeidx = MCS_HT20;
+
+ if (rates[i].flags & IEEE80211_TX_RC_SHORT_GI)
+ modeidx++;
+
+ frmlen = ath_max_4ms_framelen[modeidx][rates[i].idx];
+ max_4ms_framelen = min(max_4ms_framelen, frmlen);
}
/*
@@ -771,8 +786,6 @@
bf->bf_state.bf_type = BUF_AMPDU | BUF_AGGR;
seqno = bf->bf_state.seqno;
- if (!bf_first)
- bf_first = bf;
/* do not step over block-ack window */
if (!BAW_WITHIN(tid->seq_start, tid->baw_size, seqno)) {
@@ -780,6 +793,21 @@
break;
}
+ if (tid->bar_index > ATH_BA_INDEX(tid->seq_start, seqno)) {
+ struct ath_tx_status ts = {};
+ struct list_head bf_head;
+
+ INIT_LIST_HEAD(&bf_head);
+ list_add(&bf->list, &bf_head);
+ __skb_unlink(skb, &tid->buf_q);
+ ath_tx_update_baw(sc, tid, seqno);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
+ continue;
+ }
+
+ if (!bf_first)
+ bf_first = bf;
+
if (!rl) {
aggr_limit = ath_lookup_rate(sc, bf, tid);
rl = 1;
@@ -1122,6 +1150,7 @@
txtid->state |= AGGR_ADDBA_PROGRESS;
txtid->paused = true;
*ssn = txtid->seq_start = txtid->seq_next;
+ txtid->bar_index = -1;
memset(txtid->tx_buf, 0, sizeof(txtid->tx_buf));
txtid->baw_head = txtid->baw_tail = 0;
@@ -1156,9 +1185,9 @@
txtid->state |= AGGR_CLEANUP;
else
txtid->state &= ~AGGR_ADDBA_COMPLETE;
- spin_unlock_bh(&txq->axq_lock);
ath_tx_flush_tid(sc, txtid);
+ spin_unlock_bh(&txq->axq_lock);
}
void ath_tx_aggr_sleep(struct ieee80211_sta *sta, struct ath_softc *sc,
@@ -1400,8 +1429,6 @@
static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq,
struct list_head *list, bool retry_tx)
- __releases(txq->axq_lock)
- __acquires(txq->axq_lock)
{
struct ath_buf *bf, *lastbf;
struct list_head bf_head;
@@ -1428,13 +1455,11 @@
if (bf_is_ampdu_not_probing(bf))
txq->axq_ampdu_depth--;
- spin_unlock_bh(&txq->axq_lock);
if (bf_isampdu(bf))
ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0,
retry_tx);
else
- ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
- spin_lock_bh(&txq->axq_lock);
+ ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0);
}
}
@@ -1561,11 +1586,9 @@
break;
}
- if (!list_empty(&ac->tid_q)) {
- if (!ac->sched) {
- ac->sched = true;
- list_add_tail(&ac->list, &txq->axq_acq);
- }
+ if (!list_empty(&ac->tid_q) && !ac->sched) {
+ ac->sched = true;
+ list_add_tail(&ac->list, &txq->axq_acq);
}
if (ac == last_ac ||
@@ -1708,10 +1731,6 @@
list_add_tail(&bf->list, &bf_head);
bf->bf_state.bf_type = 0;
- /* update starting sequence number for subsequent ADDBA request */
- if (tid)
- INCR(tid->seq_start, IEEE80211_SEQ_MAX);
-
bf->bf_lastbf = bf;
ath_tx_fill_desc(sc, bf, txq, fi->framelen);
ath_tx_txqaddbuf(sc, txq, &bf_head, false);
@@ -1819,7 +1838,6 @@
struct ath_buf *bf;
u8 tidno;
- spin_lock_bh(&txctl->txq->axq_lock);
if ((sc->sc_flags & SC_OP_TXAGGR) && txctl->an &&
ieee80211_is_data_qos(hdr->frame_control)) {
tidno = ieee80211_get_qos_ctl(hdr)[0] &
@@ -1838,7 +1856,7 @@
} else {
bf = ath_tx_setup_buffer(sc, txctl->txq, tid, skb);
if (!bf)
- goto out;
+ return;
bf->bf_state.bfs_paprd = txctl->paprd;
@@ -1847,9 +1865,6 @@
ath_tx_send_normal(sc, txctl->txq, tid, skb);
}
-
-out:
- spin_unlock_bh(&txctl->txq->axq_lock);
}
/* Upon failure caller should free skb */
@@ -1916,9 +1931,11 @@
ieee80211_stop_queue(sc->hw, q);
txq->stopped = 1;
}
- spin_unlock_bh(&txq->axq_lock);
ath_tx_start_dma(sc, skb, txctl);
+
+ spin_unlock_bh(&txq->axq_lock);
+
return 0;
}
@@ -1937,9 +1954,6 @@
ath_dbg(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
- if (tx_flags & ATH_TX_BAR)
- tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
-
if (!(tx_flags & ATH_TX_ERROR))
/* Frame was ACKed */
tx_info->flags |= IEEE80211_TX_STAT_ACK;
@@ -1955,7 +1969,7 @@
skb_pull(skb, padsize);
}
- if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) {
+ if ((sc->ps_flags & PS_WAIT_FOR_TX_ACK) && !txq->axq_depth) {
sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
ath_dbg(common, ATH_DBG_PS,
"Going back to sleep after having received TX status (0x%lx)\n",
@@ -1967,7 +1981,6 @@
q = skb_get_queue_mapping(skb);
if (txq == sc->tx.txq_map[q]) {
- spin_lock_bh(&txq->axq_lock);
if (WARN_ON(--txq->pending_frames < 0))
txq->pending_frames = 0;
@@ -1975,7 +1988,6 @@
ieee80211_wake_queue(sc->hw, q);
txq->stopped = 0;
}
- spin_unlock_bh(&txq->axq_lock);
}
ieee80211_tx_status(hw, skb);
@@ -1983,16 +1995,13 @@
static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
struct ath_txq *txq, struct list_head *bf_q,
- struct ath_tx_status *ts, int txok, int sendbar)
+ struct ath_tx_status *ts, int txok)
{
struct sk_buff *skb = bf->bf_mpdu;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
unsigned long flags;
int tx_flags = 0;
- if (sendbar)
- tx_flags = ATH_TX_BAR;
-
if (!txok)
tx_flags |= ATH_TX_ERROR;
@@ -2084,8 +2093,6 @@
static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq,
struct ath_tx_status *ts, struct ath_buf *bf,
struct list_head *bf_head)
- __releases(txq->axq_lock)
- __acquires(txq->axq_lock)
{
int txok;
@@ -2095,16 +2102,12 @@
if (bf_is_ampdu_not_probing(bf))
txq->axq_ampdu_depth--;
- spin_unlock_bh(&txq->axq_lock);
-
if (!bf_isampdu(bf)) {
ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok);
- ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok, 0);
+ ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok);
} else
ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok, true);
- spin_lock_bh(&txq->axq_lock);
-
if (sc->sc_flags & SC_OP_TXAGGR)
ath_txq_schedule(sc, txq);
}
diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c
index f4cae1c..cba9d04 100644
--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -23,6 +23,7 @@
#include <linux/kernel.h>
#include <linux/firmware.h>
#include <linux/crc32.h>
+#include <linux/module.h>
#include "carl9170.h"
#include "fwcmd.h"
#include "version.h"
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index 59472e1..d19a9ee 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -314,7 +314,7 @@
* feedback either [CTL_REQ_TX_STATUS not set]
*/
- dev_kfree_skb_any(skb);
+ ieee80211_free_txskb(ar->hw, skb);
return;
} else {
/*
@@ -1432,7 +1432,7 @@
err_free:
ar->tx_dropped++;
- dev_kfree_skb_any(skb);
+ ieee80211_free_txskb(ar->hw, skb);
}
void carl9170_tx_scheduler(struct ar9170 *ar)
diff --git a/drivers/net/wireless/ath/debug.c b/drivers/net/wireless/ath/debug.c
index 5367b10..508eccf 100644
--- a/drivers/net/wireless/ath/debug.c
+++ b/drivers/net/wireless/ath/debug.c
@@ -14,6 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include "ath.h"
const char *ath_opmode_to_string(enum nl80211_iftype opmode)
diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c
index 3f508e5..19befb3 100644
--- a/drivers/net/wireless/ath/hw.c
+++ b/drivers/net/wireless/ath/hw.c
@@ -14,6 +14,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include <asm/unaligned.h>
#include "ath.h"
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index 17b0efd..4cf7c5e 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -15,6 +15,7 @@
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/export.h>
#include <asm/unaligned.h>
#include <net/mac80211.h>
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index f1be57f..10dea37 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -15,11 +15,14 @@
*/
#include <linux/kernel.h>
+#include <linux/export.h>
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include "regd.h"
#include "regd_common.h"
+static int __ath_regd_init(struct ath_regulatory *reg);
+
/*
* This is a set of common rules used by our world regulatory domains.
* We have 12 world regulatory domains. To save space we consolidate
@@ -346,10 +349,26 @@
}
}
+static u16 ath_regd_find_country_by_name(char *alpha2)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
+ if (!memcmp(allCountries[i].isoName, alpha2, 2))
+ return allCountries[i].countryCode;
+ }
+
+ return -1;
+}
+
int ath_reg_notifier_apply(struct wiphy *wiphy,
struct regulatory_request *request,
struct ath_regulatory *reg)
{
+ struct ath_common *common = container_of(reg, struct ath_common,
+ regulatory);
+ u16 country_code;
+
/* We always apply this */
ath_reg_apply_radar_flags(wiphy);
@@ -362,14 +381,37 @@
return 0;
switch (request->initiator) {
- case NL80211_REGDOM_SET_BY_DRIVER:
case NL80211_REGDOM_SET_BY_CORE:
+ /*
+ * If common->reg_world_copy is world roaming it means we *were*
+ * world roaming... so we now have to restore that data.
+ */
+ if (!ath_is_world_regd(&common->reg_world_copy))
+ break;
+
+ memcpy(reg, &common->reg_world_copy,
+ sizeof(struct ath_regulatory));
+ break;
+ case NL80211_REGDOM_SET_BY_DRIVER:
case NL80211_REGDOM_SET_BY_USER:
break;
case NL80211_REGDOM_SET_BY_COUNTRY_IE:
- if (ath_is_world_regd(reg))
- ath_reg_apply_world_flags(wiphy, request->initiator,
- reg);
+ if (!ath_is_world_regd(reg))
+ break;
+
+ country_code = ath_regd_find_country_by_name(request->alpha2);
+ if (country_code == (u16) -1)
+ break;
+
+ reg->current_rd = COUNTRY_ERD_FLAG;
+ reg->current_rd |= country_code;
+
+ printk(KERN_DEBUG "ath: regdomain 0x%0x updated by CountryIE\n",
+ reg->current_rd);
+ __ath_regd_init(reg);
+
+ ath_reg_apply_world_flags(wiphy, request->initiator, reg);
+
break;
}
@@ -507,11 +549,7 @@
reg->current_rd = 0x64;
}
-int
-ath_regd_init(struct ath_regulatory *reg,
- struct wiphy *wiphy,
- int (*reg_notifier)(struct wiphy *wiphy,
- struct regulatory_request *request))
+static int __ath_regd_init(struct ath_regulatory *reg)
{
struct country_code_to_enum_rd *country = NULL;
u16 regdmn;
@@ -582,7 +620,29 @@
printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n",
reg->regpair->regDmnEnum);
+ return 0;
+}
+
+int
+ath_regd_init(struct ath_regulatory *reg,
+ struct wiphy *wiphy,
+ int (*reg_notifier)(struct wiphy *wiphy,
+ struct regulatory_request *request))
+{
+ struct ath_common *common = container_of(reg, struct ath_common,
+ regulatory);
+ int r;
+
+ r = __ath_regd_init(reg);
+ if (r)
+ return r;
+
+ if (ath_is_world_regd(reg))
+ memcpy(&common->reg_world_copy, reg,
+ sizeof(struct ath_regulatory));
+
ath_regd_init_wiphy(reg, wiphy, reg_notifier);
+
return 0;
}
EXPORT_SYMBOL(ath_regd_init);