| /* |
| * board-omap3pandora.c (Pandora Handheld Console) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/spi/spi.h> |
| #include <linux/spi/ads7846.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/i2c/twl4030.h> |
| #include <linux/leds.h> |
| #include <linux/input.h> |
| #include <linux/input/matrix_keypad.h> |
| #include <linux/gpio_keys.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <mach/board.h> |
| #include <mach/common.h> |
| #include <mach/gpio.h> |
| #include <mach/hardware.h> |
| #include <mach/mcspi.h> |
| #include <mach/usb.h> |
| #include <mach/mux.h> |
| |
| #include "sdram-micron-mt46h32m32lf-6.h" |
| #include "mmc-twl4030.h" |
| |
| #define OMAP3_PANDORA_TS_GPIO 94 |
| |
| /* hardware debounce: (value + 1) * 31us */ |
| #define GPIO_DEBOUNCE_TIME 127 |
| |
| static struct gpio_led pandora_gpio_leds[] = { |
| { |
| .name = "pandora::sd1", |
| .default_trigger = "mmc0", |
| .gpio = 128, |
| }, { |
| .name = "pandora::sd2", |
| .default_trigger = "mmc1", |
| .gpio = 129, |
| }, { |
| .name = "pandora::bluetooth", |
| .gpio = 158, |
| }, { |
| .name = "pandora::wifi", |
| .gpio = 159, |
| }, |
| }; |
| |
| static struct gpio_led_platform_data pandora_gpio_led_data = { |
| .leds = pandora_gpio_leds, |
| .num_leds = ARRAY_SIZE(pandora_gpio_leds), |
| }; |
| |
| static struct platform_device pandora_leds_gpio = { |
| .name = "leds-gpio", |
| .id = -1, |
| .dev = { |
| .platform_data = &pandora_gpio_led_data, |
| }, |
| }; |
| |
| #define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ |
| { \ |
| .gpio = gpio_num, \ |
| .type = ev_type, \ |
| .code = ev_code, \ |
| .active_low = act_low, \ |
| .desc = "btn " descr, \ |
| } |
| |
| #define GPIO_BUTTON_LOW(gpio_num, event_code, description) \ |
| GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description) |
| |
| static struct gpio_keys_button pandora_gpio_keys[] = { |
| GPIO_BUTTON_LOW(110, KEY_UP, "up"), |
| GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), |
| GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), |
| GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), |
| GPIO_BUTTON_LOW(111, BTN_A, "a"), |
| GPIO_BUTTON_LOW(106, BTN_B, "b"), |
| GPIO_BUTTON_LOW(109, BTN_X, "x"), |
| GPIO_BUTTON_LOW(101, BTN_Y, "y"), |
| GPIO_BUTTON_LOW(102, BTN_TL, "l"), |
| GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), |
| GPIO_BUTTON_LOW(105, BTN_TR, "r"), |
| GPIO_BUTTON_LOW(107, BTN_TR2, "r2"), |
| GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"), |
| GPIO_BUTTON_LOW(99, KEY_MENU, "menu"), |
| GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"), |
| GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"), |
| GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"), |
| }; |
| |
| static struct gpio_keys_platform_data pandora_gpio_key_info = { |
| .buttons = pandora_gpio_keys, |
| .nbuttons = ARRAY_SIZE(pandora_gpio_keys), |
| }; |
| |
| static struct platform_device pandora_keys_gpio = { |
| .name = "gpio-keys", |
| .id = -1, |
| .dev = { |
| .platform_data = &pandora_gpio_key_info, |
| }, |
| }; |
| |
| static void __init pandora_keys_gpio_init(void) |
| { |
| /* set debounce time for GPIO banks 4 and 6 */ |
| omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); |
| omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); |
| } |
| |
| static int board_keymap[] = { |
| /* col, row, code */ |
| KEY(0, 0, KEY_9), |
| KEY(0, 1, KEY_0), |
| KEY(0, 2, KEY_BACKSPACE), |
| KEY(0, 3, KEY_O), |
| KEY(0, 4, KEY_P), |
| KEY(0, 5, KEY_K), |
| KEY(0, 6, KEY_L), |
| KEY(0, 7, KEY_ENTER), |
| KEY(1, 0, KEY_8), |
| KEY(1, 1, KEY_7), |
| KEY(1, 2, KEY_6), |
| KEY(1, 3, KEY_5), |
| KEY(1, 4, KEY_4), |
| KEY(1, 5, KEY_3), |
| KEY(1, 6, KEY_2), |
| KEY(1, 7, KEY_1), |
| KEY(2, 0, KEY_I), |
| KEY(2, 1, KEY_U), |
| KEY(2, 2, KEY_Y), |
| KEY(2, 3, KEY_T), |
| KEY(2, 4, KEY_R), |
| KEY(2, 5, KEY_E), |
| KEY(2, 6, KEY_W), |
| KEY(2, 7, KEY_Q), |
| KEY(3, 0, KEY_J), |
| KEY(3, 1, KEY_H), |
| KEY(3, 2, KEY_G), |
| KEY(3, 3, KEY_F), |
| KEY(3, 4, KEY_D), |
| KEY(3, 5, KEY_S), |
| KEY(3, 6, KEY_A), |
| KEY(3, 7, KEY_LEFTSHIFT), |
| KEY(4, 0, KEY_N), |
| KEY(4, 1, KEY_B), |
| KEY(4, 2, KEY_V), |
| KEY(4, 3, KEY_C), |
| KEY(4, 4, KEY_X), |
| KEY(4, 5, KEY_Z), |
| KEY(4, 6, KEY_DOT), |
| KEY(4, 7, KEY_COMMA), |
| KEY(5, 0, KEY_M), |
| KEY(5, 1, KEY_SPACE), |
| KEY(5, 2, KEY_FN), |
| }; |
| |
| static struct matrix_keymap_data board_map_data = { |
| .keymap = board_keymap, |
| .keymap_size = ARRAY_SIZE(board_keymap), |
| }; |
| |
| static struct twl4030_keypad_data pandora_kp_data = { |
| .keymap_data = &board_map_data, |
| .rows = 8, |
| .cols = 6, |
| .rep = 1, |
| }; |
| |
| static struct twl4030_hsmmc_info omap3pandora_mmc[] = { |
| { |
| .mmc = 1, |
| .wires = 4, |
| .gpio_cd = -EINVAL, |
| .gpio_wp = 126, |
| .ext_clock = 0, |
| }, |
| { |
| .mmc = 2, |
| .wires = 4, |
| .gpio_cd = -EINVAL, |
| .gpio_wp = 127, |
| .ext_clock = 1, |
| .transceiver = true, |
| }, |
| { |
| .mmc = 3, |
| .wires = 4, |
| .gpio_cd = -EINVAL, |
| .gpio_wp = -EINVAL, |
| }, |
| {} /* Terminator */ |
| }; |
| |
| static struct regulator_consumer_supply pandora_vmmc1_supply = { |
| .supply = "vmmc", |
| }; |
| |
| static struct regulator_consumer_supply pandora_vmmc2_supply = { |
| .supply = "vmmc", |
| }; |
| |
| static int omap3pandora_twl_gpio_setup(struct device *dev, |
| unsigned gpio, unsigned ngpio) |
| { |
| /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */ |
| omap3pandora_mmc[0].gpio_cd = gpio + 0; |
| omap3pandora_mmc[1].gpio_cd = gpio + 1; |
| twl4030_mmc_init(omap3pandora_mmc); |
| |
| /* link regulators to MMC adapters */ |
| pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev; |
| pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev; |
| |
| return 0; |
| } |
| |
| static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { |
| .gpio_base = OMAP_MAX_GPIO_LINES, |
| .irq_base = TWL4030_GPIO_IRQ_BASE, |
| .irq_end = TWL4030_GPIO_IRQ_END, |
| .setup = omap3pandora_twl_gpio_setup, |
| }; |
| |
| /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ |
| static struct regulator_init_data pandora_vmmc1 = { |
| .constraints = { |
| .min_uV = 1850000, |
| .max_uV = 3150000, |
| .valid_modes_mask = REGULATOR_MODE_NORMAL |
| | REGULATOR_MODE_STANDBY, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
| | REGULATOR_CHANGE_MODE |
| | REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = 1, |
| .consumer_supplies = &pandora_vmmc1_supply, |
| }; |
| |
| /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ |
| static struct regulator_init_data pandora_vmmc2 = { |
| .constraints = { |
| .min_uV = 1850000, |
| .max_uV = 3150000, |
| .valid_modes_mask = REGULATOR_MODE_NORMAL |
| | REGULATOR_MODE_STANDBY, |
| .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
| | REGULATOR_CHANGE_MODE |
| | REGULATOR_CHANGE_STATUS, |
| }, |
| .num_consumer_supplies = 1, |
| .consumer_supplies = &pandora_vmmc2_supply, |
| }; |
| |
| static struct twl4030_usb_data omap3pandora_usb_data = { |
| .usb_mode = T2_USB_MODE_ULPI, |
| }; |
| |
| static struct twl4030_platform_data omap3pandora_twldata = { |
| .irq_base = TWL4030_IRQ_BASE, |
| .irq_end = TWL4030_IRQ_END, |
| .gpio = &omap3pandora_gpio_data, |
| .usb = &omap3pandora_usb_data, |
| .vmmc1 = &pandora_vmmc1, |
| .vmmc2 = &pandora_vmmc2, |
| .keypad = &pandora_kp_data, |
| }; |
| |
| static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { |
| { |
| I2C_BOARD_INFO("tps65950", 0x48), |
| .flags = I2C_CLIENT_WAKE, |
| .irq = INT_34XX_SYS_NIRQ, |
| .platform_data = &omap3pandora_twldata, |
| }, |
| }; |
| |
| static int __init omap3pandora_i2c_init(void) |
| { |
| omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, |
| ARRAY_SIZE(omap3pandora_i2c_boardinfo)); |
| /* i2c2 pins are not connected */ |
| omap_register_i2c_bus(3, 400, NULL, 0); |
| return 0; |
| } |
| |
| static void __init omap3pandora_ads7846_init(void) |
| { |
| int gpio = OMAP3_PANDORA_TS_GPIO; |
| int ret; |
| |
| ret = gpio_request(gpio, "ads7846_pen_down"); |
| if (ret < 0) { |
| printk(KERN_ERR "Failed to request GPIO %d for " |
| "ads7846 pen down IRQ\n", gpio); |
| return; |
| } |
| |
| gpio_direction_input(gpio); |
| } |
| |
| static int ads7846_get_pendown_state(void) |
| { |
| return !gpio_get_value(OMAP3_PANDORA_TS_GPIO); |
| } |
| |
| static struct ads7846_platform_data ads7846_config = { |
| .x_max = 0x0fff, |
| .y_max = 0x0fff, |
| .x_plate_ohms = 180, |
| .pressure_max = 255, |
| .debounce_max = 10, |
| .debounce_tol = 3, |
| .debounce_rep = 1, |
| .get_pendown_state = ads7846_get_pendown_state, |
| .keep_vref_on = 1, |
| }; |
| |
| static struct omap2_mcspi_device_config ads7846_mcspi_config = { |
| .turbo_mode = 0, |
| .single_channel = 1, /* 0: slave, 1: master */ |
| }; |
| |
| static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { |
| { |
| .modalias = "ads7846", |
| .bus_num = 1, |
| .chip_select = 0, |
| .max_speed_hz = 1500000, |
| .controller_data = &ads7846_mcspi_config, |
| .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO), |
| .platform_data = &ads7846_config, |
| } |
| }; |
| |
| static struct platform_device omap3pandora_lcd_device = { |
| .name = "pandora_lcd", |
| .id = -1, |
| }; |
| |
| static struct omap_lcd_config omap3pandora_lcd_config __initdata = { |
| .ctrl_name = "internal", |
| }; |
| |
| static struct omap_board_config_kernel omap3pandora_config[] __initdata = { |
| { OMAP_TAG_LCD, &omap3pandora_lcd_config }, |
| }; |
| |
| static void __init omap3pandora_init_irq(void) |
| { |
| omap_board_config = omap3pandora_config; |
| omap_board_config_size = ARRAY_SIZE(omap3pandora_config); |
| omap2_init_common_hw(mt46h32m32lf6_sdrc_params, |
| mt46h32m32lf6_sdrc_params); |
| omap_init_irq(); |
| omap_gpio_init(); |
| } |
| |
| static struct platform_device *omap3pandora_devices[] __initdata = { |
| &omap3pandora_lcd_device, |
| &pandora_leds_gpio, |
| &pandora_keys_gpio, |
| }; |
| |
| static void __init omap3pandora_init(void) |
| { |
| omap3pandora_i2c_init(); |
| platform_add_devices(omap3pandora_devices, |
| ARRAY_SIZE(omap3pandora_devices)); |
| omap_serial_init(); |
| spi_register_board_info(omap3pandora_spi_board_info, |
| ARRAY_SIZE(omap3pandora_spi_board_info)); |
| omap3pandora_ads7846_init(); |
| pandora_keys_gpio_init(); |
| usb_musb_init(); |
| |
| /* Ensure SDRC pins are mux'd for self-refresh */ |
| omap_cfg_reg(H16_34XX_SDRC_CKE0); |
| omap_cfg_reg(H17_34XX_SDRC_CKE1); |
| } |
| |
| static void __init omap3pandora_map_io(void) |
| { |
| omap2_set_globals_343x(); |
| omap2_map_common_io(); |
| } |
| |
| MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") |
| .phys_io = 0x48000000, |
| .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, |
| .boot_params = 0x80000100, |
| .map_io = omap3pandora_map_io, |
| .init_irq = omap3pandora_init_irq, |
| .init_machine = omap3pandora_init, |
| .timer = &omap_timer, |
| MACHINE_END |