drivers/net: return operator cleanup
Change "return (EXPR);" to "return EXPR;"
return is not a function, parentheses are not required.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wan/sdla.c b/drivers/net/wan/sdla.c
index f4125da..3f4e2b5 100644
--- a/drivers/net/wan/sdla.c
+++ b/drivers/net/wan/sdla.c
@@ -178,7 +178,7 @@
byte = *temp;
spin_unlock_irqrestore(&sdla_lock, flags);
- return(byte);
+ return byte;
}
static void sdla_stop(struct net_device *dev)
@@ -267,7 +267,7 @@
resp = *temp;
}
}
- return(time_before(jiffies, done) ? jiffies - start : -1);
+ return time_before(jiffies, done) ? jiffies - start : -1;
}
/* constants for Z80 CPU speed */
@@ -283,13 +283,13 @@
sdla_start(dev);
if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0)
- return(-EIO);
+ return -EIO;
data = LOADER_READY;
sdla_write(dev, 0, &data, 1);
if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0)
- return(-EIO);
+ return -EIO;
sdla_stop(dev);
sdla_read(dev, 0, &data, 1);
@@ -297,11 +297,11 @@
if (data == Z80_SCC_BAD)
{
printk("%s: SCC bad\n", dev->name);
- return(-EIO);
+ return -EIO;
}
if (data != Z80_SCC_OK)
- return(-EINVAL);
+ return -EINVAL;
if (jiffs < 165)
ifr->ifr_mtu = SDLA_CPU_16M;
@@ -316,7 +316,7 @@
else
ifr->ifr_mtu = SDLA_CPU_3M;
- return(0);
+ return 0;
}
/************************************************
@@ -493,7 +493,7 @@
if (ret != SDLA_RET_OK)
sdla_errors(dev, cmd, dlci, ret, len, &status);
- return(ret);
+ return ret;
}
/***********************************************
@@ -516,14 +516,14 @@
break;
if (i == CONFIG_DLCI_MAX)
- return(-ENODEV);
+ return -ENODEV;
flp->dlci[i] = abs(flp->dlci[i]);
if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
- return(0);
+ return 0;
}
static int sdla_deactivate(struct net_device *slave, struct net_device *master)
@@ -538,14 +538,14 @@
break;
if (i == CONFIG_DLCI_MAX)
- return(-ENODEV);
+ return -ENODEV;
flp->dlci[i] = -abs(flp->dlci[i]);
if (netif_running(slave) && (flp->config.station == FRAD_STATION_NODE))
sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL);
- return(0);
+ return 0;
}
static int sdla_assoc(struct net_device *slave, struct net_device *master)
@@ -554,7 +554,7 @@
int i;
if (master->type != ARPHRD_DLCI)
- return(-EINVAL);
+ return -EINVAL;
flp = netdev_priv(slave);
@@ -563,11 +563,11 @@
if (!flp->master[i])
break;
if (abs(flp->dlci[i]) == *(short *)(master->dev_addr))
- return(-EADDRINUSE);
+ return -EADDRINUSE;
}
if (i == CONFIG_DLCI_MAX)
- return(-EMLINK); /* #### Alan: Comments on this ?? */
+ return -EMLINK; /* #### Alan: Comments on this ?? */
flp->master[i] = master;
@@ -581,7 +581,7 @@
sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
}
- return(0);
+ return 0;
}
static int sdla_deassoc(struct net_device *slave, struct net_device *master)
@@ -596,7 +596,7 @@
break;
if (i == CONFIG_DLCI_MAX)
- return(-ENODEV);
+ return -ENODEV;
flp->master[i] = NULL;
flp->dlci[i] = 0;
@@ -609,7 +609,7 @@
sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL);
}
- return(0);
+ return 0;
}
static int sdla_dlci_conf(struct net_device *slave, struct net_device *master, int get)
@@ -626,7 +626,7 @@
break;
if (i == CONFIG_DLCI_MAX)
- return(-ENODEV);
+ return -ENODEV;
dlp = netdev_priv(master);
@@ -641,7 +641,7 @@
&dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL);
}
- return(ret == SDLA_RET_OK ? 0 : -EIO);
+ return ret == SDLA_RET_OK ? 0 : -EIO;
}
/**************************
@@ -986,7 +986,7 @@
netif_stop_queue(dev);
- return(0);
+ return 0;
}
struct conf_data {
@@ -1006,10 +1006,10 @@
flp = netdev_priv(dev);
if (!flp->initialized)
- return(-EPERM);
+ return -EPERM;
if (!flp->configured)
- return(-EPERM);
+ return -EPERM;
/* time to send in the configuration */
len = 0;
@@ -1087,7 +1087,7 @@
netif_start_queue(dev);
- return(0);
+ return 0;
}
static int sdla_config(struct net_device *dev, struct frad_conf __user *conf, int get)
@@ -1098,48 +1098,48 @@
short size;
if (dev->type == 0xFFFF)
- return(-EUNATCH);
+ return -EUNATCH;
flp = netdev_priv(dev);
if (!get)
{
if (netif_running(dev))
- return(-EBUSY);
+ return -EBUSY;
if(copy_from_user(&data.config, conf, sizeof(struct frad_conf)))
return -EFAULT;
if (data.config.station & ~FRAD_STATION_NODE)
- return(-EINVAL);
+ return -EINVAL;
if (data.config.flags & ~FRAD_VALID_FLAGS)
- return(-EINVAL);
+ return -EINVAL;
if ((data.config.kbaud < 0) ||
((data.config.kbaud > 128) && (flp->type != SDLA_S508)))
- return(-EINVAL);
+ return -EINVAL;
if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232))
- return(-EINVAL);
+ return -EINVAL;
if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU))
- return(-EINVAL);
+ return -EINVAL;
if ((data.config.T391 < 5) || (data.config.T391 > 30))
- return(-EINVAL);
+ return -EINVAL;
if ((data.config.T392 < 5) || (data.config.T392 > 30))
- return(-EINVAL);
+ return -EINVAL;
if ((data.config.N391 < 1) || (data.config.N391 > 255))
- return(-EINVAL);
+ return -EINVAL;
if ((data.config.N392 < 1) || (data.config.N392 > 10))
- return(-EINVAL);
+ return -EINVAL;
if ((data.config.N393 < 1) || (data.config.N393 > 10))
- return(-EINVAL);
+ return -EINVAL;
memcpy(&flp->config, &data.config, sizeof(struct frad_conf));
flp->config.flags |= SDLA_DIRECT_RECV;
@@ -1171,7 +1171,7 @@
{
size = sizeof(data);
if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK)
- return(-EIO);
+ return -EIO;
}
else
if (flp->configured)
@@ -1185,7 +1185,7 @@
return copy_to_user(conf, &data.config, sizeof(struct frad_conf))?-EFAULT:0;
}
- return(0);
+ return 0;
}
static int sdla_xfer(struct net_device *dev, struct sdla_mem __user *info, int read)
@@ -1200,7 +1200,7 @@
{
temp = kzalloc(mem.len, GFP_KERNEL);
if (!temp)
- return(-ENOMEM);
+ return -ENOMEM;
sdla_read(dev, mem.addr, temp, mem.len);
if(copy_to_user(mem.data, temp, mem.len))
{
@@ -1217,7 +1217,7 @@
sdla_write(dev, mem.addr, temp, mem.len);
kfree(temp);
}
- return(0);
+ return 0;
}
static int sdla_reconfig(struct net_device *dev)
@@ -1241,7 +1241,7 @@
sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL);
sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL);
- return(0);
+ return 0;
}
static int sdla_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -1254,20 +1254,20 @@
flp = netdev_priv(dev);
if (!flp->initialized)
- return(-EINVAL);
+ return -EINVAL;
switch (cmd)
{
case FRAD_GET_CONF:
case FRAD_SET_CONF:
- return(sdla_config(dev, ifr->ifr_data, cmd == FRAD_GET_CONF));
+ return sdla_config(dev, ifr->ifr_data, cmd == FRAD_GET_CONF);
case SDLA_IDENTIFY:
ifr->ifr_flags = flp->type;
break;
case SDLA_CPUSPEED:
- return(sdla_cpuspeed(dev, ifr));
+ return sdla_cpuspeed(dev, ifr);
/* ==========================================================
NOTE: This is rather a useless action right now, as the
@@ -1277,7 +1277,7 @@
============================================================*/
case SDLA_PROTOCOL:
if (flp->configured)
- return(-EALREADY);
+ return -EALREADY;
switch (ifr->ifr_flags)
{
@@ -1285,7 +1285,7 @@
dev->type = ifr->ifr_flags;
break;
default:
- return(-ENOPROTOOPT);
+ return -ENOPROTOOPT;
}
break;
@@ -1297,7 +1297,7 @@
case SDLA_READMEM:
if(!capable(CAP_SYS_RAWIO))
return -EPERM;
- return(sdla_xfer(dev, ifr->ifr_data, cmd == SDLA_READMEM));
+ return sdla_xfer(dev, ifr->ifr_data, cmd == SDLA_READMEM);
case SDLA_START:
sdla_start(dev);
@@ -1308,9 +1308,9 @@
break;
default:
- return(-EOPNOTSUPP);
+ return -EOPNOTSUPP;
}
- return(0);
+ return 0;
}
static int sdla_change_mtu(struct net_device *dev, int new_mtu)
@@ -1320,10 +1320,10 @@
flp = netdev_priv(dev);
if (netif_running(dev))
- return(-EBUSY);
+ return -EBUSY;
/* for now, you can't change the MTU! */
- return(-EOPNOTSUPP);
+ return -EOPNOTSUPP;
}
static int sdla_set_config(struct net_device *dev, struct ifmap *map)
@@ -1337,18 +1337,18 @@
flp = netdev_priv(dev);
if (flp->initialized)
- return(-EINVAL);
+ return -EINVAL;
for(i=0; i < ARRAY_SIZE(valid_port); i++)
if (valid_port[i] == map->base_addr)
break;
if (i == ARRAY_SIZE(valid_port))
- return(-EINVAL);
+ return -EINVAL;
if (!request_region(map->base_addr, SDLA_IO_EXTENTS, dev->name)){
printk(KERN_WARNING "SDLA: io-port 0x%04lx in use\n", dev->base_addr);
- return(-EINVAL);
+ return -EINVAL;
}
base = map->base_addr;