ARM: dts: msm: 8x26: add support for 1080p panel boards
Display panels often do not support run time detection. To support
different types of display, we need to create different boards. This
is currently being handled by using the platform subtype field in
socinfo. Create new files for the new panel and rename the old ones
accordingly in preparation for this new platform subtype.
Change-Id: I77d6fdaad24cce6edefeb379cf4da9a3595218da
Signed-off-by: Syed Rameez Mustafa <rameezmustafa@codeaurora.org>
diff --git a/arch/arm/boot/dts/apq8026-v1-cdp.dts b/arch/arm/boot/dts/apq8026-v1-cdp.dts
index d7e283b..b9ec6f9 100644
--- a/arch/arm/boot/dts/apq8026-v1-cdp.dts
+++ b/arch/arm/boot/dts/apq8026-v1-cdp.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "apq8026-v1.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-720p-cdp.dtsi"
/ {
model = "Qualcomm APQ 8026 CDP";
diff --git a/arch/arm/boot/dts/apq8026-v1-mtp.dts b/arch/arm/boot/dts/apq8026-v1-mtp.dts
index d24875c..c2fc72c 100644
--- a/arch/arm/boot/dts/apq8026-v1-mtp.dts
+++ b/arch/arm/boot/dts/apq8026-v1-mtp.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "apq8026-v1.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-720p-mtp.dtsi"
/ {
model = "Qualcomm APQ 8026 MTP";
diff --git a/arch/arm/boot/dts/apq8026-v1-xpm.dts b/arch/arm/boot/dts/apq8026-v1-xpm.dts
index f69511b..b435018 100644
--- a/arch/arm/boot/dts/apq8026-v1-xpm.dts
+++ b/arch/arm/boot/dts/apq8026-v1-xpm.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "apq8026-v1.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-720p-cdp.dtsi"
/ {
model = "Qualcomm APQ 8026 XPM";
diff --git a/arch/arm/boot/dts/apq8026-v2-cdp.dts b/arch/arm/boot/dts/apq8026-v2-1080p-cdp.dts
similarity index 91%
copy from arch/arm/boot/dts/apq8026-v2-cdp.dts
copy to arch/arm/boot/dts/apq8026-v2-1080p-cdp.dts
index cb68779..5294628 100644
--- a/arch/arm/boot/dts/apq8026-v2-cdp.dts
+++ b/arch/arm/boot/dts/apq8026-v2-1080p-cdp.dts
@@ -13,10 +13,10 @@
/dts-v1/;
/include/ "apq8026-v2.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-1080p-cdp.dtsi"
/ {
model = "Qualcomm APQ 8026v2 CDP";
compatible = "qcom,apq8026-cdp", "qcom,apq8026", "qcom,cdp";
- qcom,board-id = <1 0>;
+ qcom,board-id = <1 2>;
};
diff --git a/arch/arm/boot/dts/apq8026-v2-mtp.dts b/arch/arm/boot/dts/apq8026-v2-1080p-mtp.dts
similarity index 91%
copy from arch/arm/boot/dts/apq8026-v2-mtp.dts
copy to arch/arm/boot/dts/apq8026-v2-1080p-mtp.dts
index 40856c8..0ea98f5 100644
--- a/arch/arm/boot/dts/apq8026-v2-mtp.dts
+++ b/arch/arm/boot/dts/apq8026-v2-1080p-mtp.dts
@@ -13,10 +13,10 @@
/dts-v1/;
/include/ "apq8026-v2.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-1080p-mtp.dtsi"
/ {
model = "Qualcomm APQ 8026v2 MTP";
compatible = "qcom,apq8026-mtp", "qcom,apq8026", "qcom,mtp";
- qcom,board-id = <8 0>;
+ qcom,board-id = <8 2>;
};
diff --git a/arch/arm/boot/dts/apq8026-v2-cdp.dts b/arch/arm/boot/dts/apq8026-v2-720p-cdp.dts
similarity index 95%
rename from arch/arm/boot/dts/apq8026-v2-cdp.dts
rename to arch/arm/boot/dts/apq8026-v2-720p-cdp.dts
index cb68779..cb2226a 100644
--- a/arch/arm/boot/dts/apq8026-v2-cdp.dts
+++ b/arch/arm/boot/dts/apq8026-v2-720p-cdp.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "apq8026-v2.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-720p-cdp.dtsi"
/ {
model = "Qualcomm APQ 8026v2 CDP";
diff --git a/arch/arm/boot/dts/apq8026-v2-mtp.dts b/arch/arm/boot/dts/apq8026-v2-720p-mtp.dts
similarity index 95%
rename from arch/arm/boot/dts/apq8026-v2-mtp.dts
rename to arch/arm/boot/dts/apq8026-v2-720p-mtp.dts
index 40856c8..439b3d7 100644
--- a/arch/arm/boot/dts/apq8026-v2-mtp.dts
+++ b/arch/arm/boot/dts/apq8026-v2-720p-mtp.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "apq8026-v2.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-720p-mtp.dtsi"
/ {
model = "Qualcomm APQ 8026v2 MTP";
diff --git a/arch/arm/boot/dts/apq8026-v2-xpm.dts b/arch/arm/boot/dts/apq8026-v2-xpm.dts
index 324516d..3133424 100644
--- a/arch/arm/boot/dts/apq8026-v2-xpm.dts
+++ b/arch/arm/boot/dts/apq8026-v2-xpm.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "apq8026-v2.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-720p-cdp.dtsi"
/ {
model = "Qualcomm APQ 8026v2 XPM";
diff --git a/arch/arm/boot/dts/msm8226-1080p-cdp.dtsi b/arch/arm/boot/dts/msm8226-1080p-cdp.dtsi
new file mode 100644
index 0000000..b2ff209
--- /dev/null
+++ b/arch/arm/boot/dts/msm8226-1080p-cdp.dtsi
@@ -0,0 +1,479 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/include/ "msm8226-camera-sensor-cdp.dtsi"
+
+&soc {
+ serial@f991f000 {
+ status = "ok";
+ };
+
+ i2c@f9927000 { /* BLSP1 QUP5 */
+ synaptics@20 {
+ compatible = "synaptics,rmi4";
+ reg = <0x20>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <17 0x2008>;
+ vdd-supply = <&pm8226_l19>;
+ vcc_i2c-supply = <&pm8226_lvs1>;
+ synaptics,reset-gpio = <&msmgpio 16 0x00>;
+ synaptics,irq-gpio = <&msmgpio 17 0x2008>;
+ synaptics,button-map = <139 102 158>;
+ synaptics,i2c-pull-up;
+ synaptics,power-down;
+ synaptics,disable-gpios;
+ };
+ };
+
+ i2c@f9925000 { /* BLSP1 QUP3 */
+ nfc-nci@0e {
+ compatible = "qcom,nfc-nci";
+ reg = <0x0e>;
+ qcom,irq-gpio = <&msmgpio 21 0x00>;
+ qcom,dis-gpio = <&msmgpio 20 0x00>;
+ qcom,clk-src = "BBCLK2";
+ qcom,clk-en-gpio = <&msmgpio 0 0x00>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <21 0>;
+ qcom,clk-gpio = <&pm8226_gpios 3 0>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ camera_focus {
+ label = "camera_focus";
+ gpios = <&msmgpio 108 0x1>;
+ linux,input-type = <1>;
+ linux,code = <0x210>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+
+ camera_snapshot {
+ label = "camera_snapshot";
+ gpios = <&msmgpio 107 0x1>;
+ linux,input-type = <1>;
+ linux,code = <0x2fe>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+
+ vol_up {
+ label = "volume_up";
+ gpios = <&msmgpio 106 0x1>;
+ linux,input-type = <1>;
+ linux,code = <115>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+ };
+
+ spi@f9923000 {
+ ethernet-switch@3 {
+ compatible = "micrel,ks8851";
+ reg = <3>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 0x8>;
+ spi-max-frequency = <4800000>;
+ rst-gpio = <&msmgpio 114 0>;
+ vdd-io-supply = <&pm8226_lvs1>;
+ vdd-phy-supply = <&pm8226_lvs1>;
+ };
+ };
+
+ sound {
+ qcom,audio-routing =
+ "RX_BIAS", "MCLK",
+ "LDO_H", "MCLK",
+ "SPK_OUT", "MCLK",
+ "SPK_OUT", "EXT_VDD_SPKR",
+ "AMIC1", "MIC BIAS1 Internal1",
+ "MIC BIAS1 Internal1", "Handset Mic",
+ "AMIC2", "MIC BIAS2 External",
+ "MIC BIAS2 External", "Headset Mic",
+ "AMIC4", "MIC BIAS2 External",
+ "MIC BIAS2 External", "ANCRight Headset Mic",
+ "AMIC5", "MIC BIAS2 External",
+ "MIC BIAS2 External", "ANCLeft Headset Mic",
+ "DMIC1", "MIC BIAS1 External",
+ "MIC BIAS1 External", "Digital Mic1",
+ "DMIC2", "MIC BIAS1 External",
+ "MIC BIAS1 External", "Digital Mic2",
+ "DMIC3", "MIC BIAS3 External",
+ "MIC BIAS3 External", "Digital Mic3",
+ "DMIC4", "MIC BIAS3 External",
+ "MIC BIAS3 External", "Digital Mic4";
+
+ qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>;
+ qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>;
+ qcom,headset-jack-type-NC;
+ };
+
+ sound-9302 {
+ qcom,audio-routing =
+ "RX_BIAS", "MCLK",
+ "LDO_H", "MCLK",
+ "SPK_OUT", "MCLK",
+ "SPK_OUT", "EXT_VDD_SPKR",
+ "AMIC1", "MIC BIAS1 External",
+ "MIC BIAS1 External", "Handset Mic",
+ "AMIC2", "MIC BIAS2 External",
+ "MIC BIAS2 External", "Headset Mic",
+ "AMIC3", "MIC BIAS1 External",
+ "MIC BIAS1 External", "Handset Mic";
+
+ qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>;
+ qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>;
+ qcom,headset-jack-type-NC;
+ };
+};
+
+&sdcc1 {
+ vdd-supply = <&pm8226_l17>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8226_l6>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,nonremovable;
+
+ status = "disabled";
+};
+
+&sdhc_1 {
+ vdd-supply = <&pm8226_l17>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8226_l6>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,nonremovable;
+
+ status = "ok";
+};
+
+&sdcc2 {
+ vdd-supply = <&pm8226_l18>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8226_l21>;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,xpc;
+ qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
+ qcom,current-limit = <600>;
+
+ #address-cells = <0>;
+ interrupt-parent = <&sdcc2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 220 0
+ 2 &msmgpio 38 0x3>;
+ interrupt-names = "core_irq", "bam_irq", "status_irq";
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ status = "disabled";
+};
+
+&sdhc_2 {
+ vdd-supply = <&pm8226_l18>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8226_l21>;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+
+ #address-cells = <0>;
+ interrupt-parent = <&sdhc_2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 221 0
+ 2 &msmgpio 38 0x3>;
+ interrupt-names = "hc_irq", "pwr_irq", "status_irq";
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ status = "ok";
+};
+
+&sdcc3 {
+ qcom,sup-voltages = <1800 1800>;
+ status = "disabled";
+};
+
+&sdhc_3 {
+ qcom,sup-voltages = <1800 1800>;
+ status = "disabled";
+};
+
+&spmi_bus {
+ qcom,pm8226@0 {
+ qcom,leds@a100 {
+ status = "okay";
+ qcom,led_mpp_2 {
+ label = "mpp";
+ linux,name = "button-backlight";
+ linux,default-trigger = "none";
+ qcom,default-state = "off";
+ qcom,max-current = <40>;
+ qcom,current-setting = <5>;
+ qcom,id = <6>;
+ qcom,mode = "manual";
+ qcom,source-sel = <1>;
+ qcom,mode-ctrl = <0x60>;
+ };
+ };
+
+ qcom,leds@a300 {
+ status = "okay";
+ qcom,led_mpp_4 {
+ label = "mpp";
+ linux,name = "green";
+ linux,default-trigger = "battery-full";
+ qcom,default-state = "off";
+ qcom,max-current = <40>;
+ qcom,current-setting = <5>;
+ qcom,id = <6>;
+ qcom,mode = "pwm";
+ qcom,pwm-us = <1000>;
+ qcom,source-sel = <8>;
+ qcom,mode-ctrl = <0x60>;
+ qcom,pwm-channel = <0>;
+ qcom,start-idx = <1>;
+ qcom,ramp-step-ms = <120>;
+ qcom,duty-pcts = [00 00 00 00 00
+ 00 00 00 00 00
+ 50 00 00 00 00
+ 00 00 00 00 00
+ 00];
+ qcom,use-blink;
+ };
+ };
+
+ qcom,leds@a500 {
+ status = "okay";
+ qcom,led_mpp_6 {
+ label = "mpp";
+ linux,name = "red";
+ linux,default-trigger = "battery-charging";
+ qcom,default-state = "off";
+ qcom,max-current = <40>;
+ qcom,current-setting = <5>;
+ qcom,id = <6>;
+ qcom,mode = "pwm";
+ qcom,pwm-us = <1000>;
+ qcom,mode-ctrl = <0x60>;
+ qcom,source-sel = <10>;
+ qcom,pwm-channel = <5>;
+ qcom,start-idx = <1>;
+ qcom,ramp-step-ms = <120>;
+ qcom,duty-pcts = [00 00 00 00 00
+ 00 00 00 00 00
+ 50 00 00 00 00
+ 00 00 00 00 00
+ 00];
+ qcom,use-blink;
+ };
+ };
+ };
+
+ qcom,pm8226@1 {
+ qcom,leds@d800 {
+ status = "okay";
+ qcom,wled_0 {
+ label = "wled";
+ linux,name = "wled:backlight";
+ linux,default-trigger = "bkl-trigger";
+ qcom,cs-out-en;
+ qcom,op-fdbck = <1>;
+ qcom,default-state = "on";
+ qcom,max-current = <20>;
+ qcom,ctrl-delay-us = <0>;
+ qcom,boost-curr-lim = <3>;
+ qcom,cp-sel = <0>;
+ qcom,switch-freq = <11>;
+ qcom,ovp-val = <0>;
+ qcom,num-strings = <1>;
+ qcom,id = <0>;
+ };
+ };
+
+ qcom,vibrator@c000 {
+ status = "okay";
+ qcom,vib-timeout-ms = <15000>;
+ qcom,vib-vtg-level-mV = <3100>;
+ };
+ };
+};
+
+&pm8226_gpios {
+ gpio@c000 { /* GPIO 1 */
+ /* XO_PMIC_CDC_MCLK enable for tapan codec */
+ qcom,mode = <1>; /* Digital output */
+ qcom,output-type = <0>; /* CMOS logic */
+ qcom,pull = <5>; /* QPNP_PIN_PULL_NO*/
+ qcom,vin-sel = <3>; /* QPNP_PIN_VIN3 */
+ qcom,out-strength = <3>;/* QPNP_PIN_OUT_STRENGTH_HIGH */
+ qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
+ qcom,master-en = <1>; /* Enable GPIO */
+ };
+
+ gpio@c100 { /* GPIO 2 */
+ qcom,mode = <1>;
+ qcom,output-type = <0>;
+ qcom,pull = <5>;
+ qcom,vin-sel = <3>;
+ qcom,out-strength = <3>;
+ qcom,src-sel = <2>;
+ qcom,master-en = <1>;
+ };
+
+ gpio@c200 { /* GPIO 3 */
+ qcom,mode = <0>; /* QPNP_PIN_MODE_DIG_IN */
+ qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
+ qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
+ qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
+ qcom,master-en = <1>;
+ };
+
+ gpio@c300 { /* GPIO 4 */
+ };
+
+ gpio@c400 { /* GPIO 5 */
+ };
+
+ gpio@c500 { /* GPIO 6 */
+ };
+
+ gpio@c600 { /* GPIO 7 */
+ };
+
+ gpio@c700 { /* GPIO 8 */
+ };
+};
+
+&pm8226_mpps {
+ mpp@a000 { /* MPP 1 */
+ };
+
+ mpp@a100 { /* MPP 2 */
+ };
+
+ mpp@a200 { /* MPP 3 */
+ };
+
+ mpp@a300 { /* MPP 4 */
+ };
+
+ mpp@a400 { /* MPP 5 */
+ /* PA_THERM0 config */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <0>; /* AMUX 5 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+
+ mpp@a500 { /* MPP 6 */
+ };
+
+ mpp@a600 { /* MPP 7 */
+ };
+
+ mpp@a700 { /* MPP 8 */
+ /* PA_THERM1 config */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <3>; /* AMUX 8 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+};
+
+&pm8226_chg {
+ qcom,charging-disabled;
+ qcom,use-default-batt-values;
+
+ qcom,bat-if@1200 {
+ status = "disabled";
+ };
+};
+
+&pm8226_vadc {
+ chan@14 {
+ label = "pa_therm0";
+ reg = <0x14>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@17 {
+ label = "pa_therm1";
+ reg = <0x17>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/msm8226-1080p-mtp.dtsi b/arch/arm/boot/dts/msm8226-1080p-mtp.dtsi
new file mode 100644
index 0000000..789e4d8
--- /dev/null
+++ b/arch/arm/boot/dts/msm8226-1080p-mtp.dtsi
@@ -0,0 +1,496 @@
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/include/ "msm8226-camera-sensor-mtp.dtsi"
+
+&soc {
+ serial@f991f000 {
+ status = "ok";
+ };
+
+ i2c@f9927000 { /* BLSP1 QUP5 */
+ synaptics@20 {
+ compatible = "synaptics,rmi4";
+ reg = <0x20>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <17 0x2008>;
+ vdd-supply = <&pm8226_l19>;
+ vcc_i2c-supply = <&pm8226_lvs1>;
+ synaptics,reset-gpio = <&msmgpio 16 0x00>;
+ synaptics,irq-gpio = <&msmgpio 17 0x2008>;
+ synaptics,button-map = <139 102 158>;
+ synaptics,i2c-pull-up;
+ synaptics,power-down;
+ synaptics,disable-gpios;
+ };
+ };
+
+ i2c@f9925000 { /* BLSP1 QUP3 */
+ nfc-nci@0e {
+ compatible = "qcom,nfc-nci";
+ reg = <0x0e>;
+ qcom,irq-gpio = <&msmgpio 21 0x00>;
+ qcom,dis-gpio = <&msmgpio 20 0x00>;
+ qcom,clk-src = "BBCLK2";
+ qcom,clk-en-gpio = <&msmgpio 0 0x00>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <21 0>;
+ qcom,clk-gpio = <&pm8226_gpios 3 0>;
+ };
+ };
+ gpio_keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ camera_focus {
+ label = "camera_focus";
+ gpios = <&msmgpio 108 0x1>;
+ linux,input-type = <1>;
+ linux,code = <0x210>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+
+ camera_snapshot {
+ label = "camera_snapshot";
+ gpios = <&msmgpio 107 0x1>;
+ linux,input-type = <1>;
+ linux,code = <0x2fe>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+
+ vol_up {
+ label = "volume_up";
+ gpios = <&msmgpio 106 0x1>;
+ linux,input-type = <1>;
+ linux,code = <115>;
+ gpio-key,wakeup;
+ debounce-interval = <15>;
+ };
+ };
+
+ spi@f9923000 {
+ ethernet-switch@3 {
+ compatible = "micrel,ks8851";
+ reg = <3>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <115 0x8>;
+ spi-max-frequency = <4800000>;
+ rst-gpio = <&msmgpio 114 0>;
+ vdd-io-supply = <&pm8226_lvs1>;
+ vdd-phy-supply = <&pm8226_lvs1>;
+ };
+ };
+
+ sound {
+ qcom,audio-routing =
+ "RX_BIAS", "MCLK",
+ "LDO_H", "MCLK",
+ "SPK_OUT", "MCLK",
+ "SPK_OUT", "EXT_VDD_SPKR",
+ "AMIC1", "MIC BIAS1 External",
+ "MIC BIAS1 External", "Handset Mic",
+ "AMIC2", "MIC BIAS2 External",
+ "MIC BIAS2 External", "Headset Mic",
+ "AMIC4", "MIC BIAS2 External",
+ "MIC BIAS2 External", "ANCRight Headset Mic",
+ "AMIC5", "MIC BIAS2 External",
+ "MIC BIAS2 External", "ANCLeft Headset Mic";
+
+ qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>;
+ qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>;
+ };
+
+ sound-9302 {
+ qcom,audio-routing =
+ "RX_BIAS", "MCLK",
+ "LDO_H", "MCLK",
+ "SPK_OUT", "MCLK",
+ "SPK_OUT", "EXT_VDD_SPKR",
+ "AMIC1", "MIC BIAS1 Internal1",
+ "MIC BIAS1 Internal1", "Handset Mic",
+ "AMIC2", "MIC BIAS2 External",
+ "MIC BIAS2 External", "Headset Mic",
+ "AMIC3", "MIC BIAS1 External",
+ "MIC BIAS1 External", "Handset Mic";
+
+ qcom,cdc-mclk-gpios = <&pm8226_gpios 1 0>;
+ qcom,cdc-vdd-spkr-gpios = <&pm8226_gpios 2 0>;
+ };
+};
+
+&usb_otg {
+ #address-cells = <0>;
+ interrupt-parent = <&usb_otg>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 134 0
+ 1 &intc 0 140 0
+ 2 &spmi_bus 0x0 0x0 0x9 0x0>;
+ interrupt-names = "core_irq", "async_irq", "pmic_id_irq";
+
+ qcom,hsusb-otg-mode = <3>;
+ vbus_otg-supply = <&pm8226_chg_otg>;
+};
+
+&sdcc1 {
+ vdd-supply = <&pm8226_l17>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8226_l6>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,nonremovable;
+
+ status = "disabled";
+};
+
+&sdhc_1 {
+ vdd-supply = <&pm8226_l17>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <800 500000>;
+
+ vdd-io-supply = <&pm8226_l6>;
+ qcom,vdd-io-always-on;
+ qcom,vdd-io-voltage-level = <1800000 1800000>;
+ qcom,vdd-io-current-level = <250 154000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";
+ qcom,nonremovable;
+
+ status = "ok";
+};
+
+&sdcc2 {
+ vdd-supply = <&pm8226_l18>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8226_l21>;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+ qcom,sup-voltages = <2950 2950>;
+
+ qcom,xpc;
+ qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";
+ qcom,current-limit = <600>; #address-cells = <0>; interrupt-parent = <&sdcc2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 220 0
+ 2 &msmgpio 38 0x3>;
+ interrupt-names = "core_irq", "bam_irq", "status_irq";
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ status = "disabled";
+};
+
+&sdhc_2 {
+ vdd-supply = <&pm8226_l18>;
+ qcom,vdd-voltage-level = <2950000 2950000>;
+ qcom,vdd-current-level = <9000 800000>;
+
+ vdd-io-supply = <&pm8226_l21>;
+ qcom,vdd-io-voltage-level = <1800000 2950000>;
+ qcom,vdd-io-current-level = <6 22000>;
+
+ qcom,pad-pull-on = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-pull-off = <0x0 0x3 0x3>; /* no-pull, pull-up, pull-up */
+ qcom,pad-drv-on = <0x4 0x4 0x4>; /* 10mA, 10mA, 10mA */
+ qcom,pad-drv-off = <0x0 0x0 0x0>; /* 2mA, 2mA, 2mA */
+
+ qcom,clk-rates = <400000 25000000 50000000 100000000 200000000>;
+
+ #address-cells = <0>;
+ interrupt-parent = <&sdhc_2>;
+ interrupts = <0 1 2>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xffffffff>;
+ interrupt-map = <0 &intc 0 125 0
+ 1 &intc 0 221 0
+ 2 &msmgpio 38 0x3>;
+ interrupt-names = "hc_irq", "pwr_irq", "status_irq";
+ cd-gpios = <&msmgpio 38 0x1>;
+
+ status = "ok";
+};
+
+&spmi_bus {
+ qcom,pm8226@0 {
+ qcom,leds@a100 {
+ status = "okay";
+ qcom,led_mpp_2 {
+ label = "mpp";
+ linux,name = "button-backlight";
+ linux,default-trigger = "none";
+ qcom,default-state = "off";
+ qcom,max-current = <40>;
+ qcom,current-setting = <5>;
+ qcom,id = <6>;
+ qcom,mode = "manual";
+ qcom,source-sel = <1>;
+ qcom,mode-ctrl = <0x60>;
+ };
+ };
+
+ qcom,leds@a300 {
+ status = "okay";
+ qcom,led_mpp_4 {
+ label = "mpp";
+ linux,name = "green";
+ linux,default-trigger = "battery-full";
+ qcom,default-state = "off";
+ qcom,max-current = <40>;
+ qcom,current-setting = <5>;
+ qcom,id = <6>;
+ qcom,mode = "pwm";
+ qcom,pwm-us = <1000>;
+ qcom,source-sel = <8>;
+ qcom,mode-ctrl = <0x60>;
+ qcom,pwm-channel = <0>;
+ qcom,start-idx = <1>;
+ qcom,ramp-step-ms = <120>;
+ qcom,duty-pcts = [00 00 00 00 00
+ 00 00 00 00 00
+ 50 00 00 00 00
+ 00 00 00 00 00
+ 00];
+ qcom,use-blink;
+ };
+ };
+
+ qcom,leds@a500 {
+ status = "okay";
+ qcom,led_mpp_6 {
+ label = "mpp";
+ linux,name = "red";
+ linux,default-trigger = "battery-charging";
+ qcom,default-state = "off";
+ qcom,max-current = <40>;
+ qcom,current-setting = <5>;
+ qcom,id = <6>;
+ qcom,mode = "pwm";
+ qcom,pwm-us = <1000>;
+ qcom,mode-ctrl = <0x60>;
+ qcom,source-sel = <10>;
+ qcom,pwm-channel = <5>;
+ qcom,start-idx = <1>;
+ qcom,ramp-step-ms = <120>;
+ qcom,duty-pcts = [00 00 00 00 00
+ 00 00 00 00 00
+ 50 00 00 00 00
+ 00 00 00 00 00
+ 00];
+ qcom,use-blink;
+ };
+ };
+ };
+
+ qcom,pm8226@1 {
+ qcom,leds@d300 {
+ status = "okay";
+ };
+
+ qcom,leds@d800 {
+ status = "okay";
+ qcom,wled_0 {
+ label = "wled";
+ linux,name = "wled:backlight";
+ linux,default-trigger = "bkl-trigger";
+ qcom,cs-out-en;
+ qcom,op-fdbck = <1>;
+ qcom,default-state = "on";
+ qcom,max-current = <20>;
+ qcom,ctrl-delay-us = <0>;
+ qcom,boost-curr-lim = <3>;
+ qcom,cp-sel = <0>;
+ qcom,switch-freq = <11>;
+ qcom,ovp-val = <0>;
+ qcom,num-strings = <1>;
+ qcom,id = <0>;
+ };
+ };
+
+ qcom,vibrator@c000 {
+ status = "okay";
+ qcom,vib-timeout-ms = <15000>;
+ qcom,vib-vtg-level-mV = <3100>;
+ };
+ };
+};
+
+&pm8226_gpios {
+ gpio@c000 { /* GPIO 1 */
+ /* XO_PMIC_CDC_MCLK enable for tapan codec */
+ qcom,mode = <1>; /* Digital output */
+ qcom,output-type = <0>; /* CMOS logic */
+ qcom,pull = <5>; /* QPNP_PIN_PULL_NO*/
+ qcom,vin-sel = <3>; /* QPNP_PIN_VIN3 */
+ qcom,out-strength = <3>;/* QPNP_PIN_OUT_STRENGTH_HIGH */
+ qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
+ qcom,master-en = <1>; /* Enable GPIO */
+ };
+
+ gpio@c100 { /* GPIO 2 */
+ qcom,mode = <1>;
+ qcom,output-type = <0>;
+ qcom,pull = <5>;
+ qcom,vin-sel = <3>;
+ qcom,out-strength = <3>;
+ qcom,src-sel = <2>;
+ qcom,master-en = <1>;
+ };
+
+ gpio@c200 { /* GPIO 3 */
+ qcom,mode = <0>; /* QPNP_PIN_MODE_DIG_IN */
+ qcom,pull = <5>; /* QPNP_PIN_PULL_NO */
+ qcom,vin-sel = <2>; /* QPNP_PIN_VIN2 */
+ qcom,src-sel = <2>; /* QPNP_PIN_SEL_FUNC_1 */
+ qcom,master-en = <1>;
+ };
+
+ gpio@c300 { /* GPIO 4 */
+ };
+
+ gpio@c400 { /* GPIO 5 */
+ };
+
+ gpio@c500 { /* GPIO 6 */
+ };
+
+ gpio@c600 { /* GPIO 7 */
+ };
+
+ gpio@c700 { /* GPIO 8 */
+ };
+};
+
+&pm8226_mpps {
+ mpp@a000 { /* MPP 1 */
+ };
+
+ mpp@a100 { /* MPP 2 */
+ };
+
+ mpp@a200 { /* MPP 3 */
+ };
+
+ mpp@a300 { /* MPP 4 */
+ };
+
+ mpp@a400 { /* MPP 5 */
+ /* PA_THERM0 config */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <0>; /* AMUX 5 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+
+ mpp@a500 { /* MPP 6 */
+ };
+
+ mpp@a600 { /* MPP 7 */
+ };
+
+ mpp@a700 { /* MPP 8 */
+ /* PA_THERM1 config */
+ qcom,mode = <4>; /* AIN input */
+ qcom,invert = <1>; /* Enable MPP */
+ qcom,ain-route = <3>; /* AMUX 8 */
+ qcom,master-en = <1>;
+ qcom,src-sel = <0>; /* Function constant */
+ };
+};
+
+&pm8226_vadc {
+ chan@14 {
+ label = "pa_therm0";
+ reg = <0x14>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ };
+
+ chan@17 {
+ label = "pa_therm1";
+ reg = <0x17>;
+ qcom,decimation = <0>;
+ qcom,pre-div-channel-scaling = <0>;
+ qcom,calibration-type = "ratiometric";
+ qcom,scale-function = <2>;
+ qcom,hw-settle-time = <2>;
+ qcom,fast-avg-setup = <0>;
+ };
+};
+
+/ {
+ mtp_batterydata: qcom,battery-data {
+ qcom,rpull-up-kohm = <100>;
+ qcom,vref-batt-therm = <1800000>;
+
+ /include/ "batterydata-palladium.dtsi"
+ /include/ "batterydata-mtp-3000mah.dtsi"
+ };
+};
+
+&pm8226_bms {
+ status = "ok";
+ qcom,battery-data = <&mtp_batterydata>;
+ qcom,enable-fcc-learning;
+ qcom,min-fcc-learning-soc = <20>;
+ qcom,min-fcc-ocv-pc = <30>;
+ qcom,min-fcc-learning-samples = <5>;
+ qcom,fcc-resolution = <10>;
+};
+
+&pm8226_chg {
+ qcom,charging-disabled;
+ qcom,battery-data = <&mtp_batterydata>;
+};
+
+&slim_msm {
+ tapan_codec {
+ qcom,cdc-micbias1-ext-cap;
+ };
+};
diff --git a/arch/arm/boot/dts/msm8226-cdp.dtsi b/arch/arm/boot/dts/msm8226-720p-cdp.dtsi
similarity index 100%
rename from arch/arm/boot/dts/msm8226-cdp.dtsi
rename to arch/arm/boot/dts/msm8226-720p-cdp.dtsi
diff --git a/arch/arm/boot/dts/msm8226-mtp.dtsi b/arch/arm/boot/dts/msm8226-720p-mtp.dtsi
similarity index 100%
rename from arch/arm/boot/dts/msm8226-mtp.dtsi
rename to arch/arm/boot/dts/msm8226-720p-mtp.dtsi
diff --git a/arch/arm/boot/dts/msm8226-v1-cdp.dts b/arch/arm/boot/dts/msm8226-v1-cdp.dts
index e426a97..4b8cafd 100644
--- a/arch/arm/boot/dts/msm8226-v1-cdp.dts
+++ b/arch/arm/boot/dts/msm8226-v1-cdp.dts
@@ -12,7 +12,7 @@
/dts-v1/;
/include/ "msm8226-v1.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-720p-cdp.dtsi"
/ {
model = "Qualcomm MSM 8226 CDP";
diff --git a/arch/arm/boot/dts/msm8226-v1-mtp.dts b/arch/arm/boot/dts/msm8226-v1-mtp.dts
index 08d7cec..a1e78b7 100644
--- a/arch/arm/boot/dts/msm8226-v1-mtp.dts
+++ b/arch/arm/boot/dts/msm8226-v1-mtp.dts
@@ -12,7 +12,7 @@
/dts-v1/;
/include/ "msm8226-v1.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-720p-mtp.dtsi"
/ {
model = "Qualcomm MSM 8226 MTP";
diff --git a/arch/arm/boot/dts/msm8226-v2-cdp.dts b/arch/arm/boot/dts/msm8226-v2-1080p-cdp.dts
similarity index 92%
copy from arch/arm/boot/dts/msm8226-v2-cdp.dts
copy to arch/arm/boot/dts/msm8226-v2-1080p-cdp.dts
index 3302d26..77cc08c 100644
--- a/arch/arm/boot/dts/msm8226-v2-cdp.dts
+++ b/arch/arm/boot/dts/msm8226-v2-1080p-cdp.dts
@@ -12,13 +12,13 @@
/dts-v1/;
/include/ "msm8226-v2.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-1080p-cdp.dtsi"
/include/ "msm8226-camera-sensor-cdp.dtsi"
/ {
model = "Qualcomm MSM 8226v2 CDP";
compatible = "qcom,msm8226-cdp", "qcom,msm8226", "qcom,cdp";
- qcom,board-id = <1 0>;
+ qcom,board-id = <1 2>;
};
&hsic_host {
diff --git a/arch/arm/boot/dts/msm8226-v2-mtp.dts b/arch/arm/boot/dts/msm8226-v2-1080p-mtp.dts
similarity index 92%
copy from arch/arm/boot/dts/msm8226-v2-mtp.dts
copy to arch/arm/boot/dts/msm8226-v2-1080p-mtp.dts
index 6034107..b12a77d 100644
--- a/arch/arm/boot/dts/msm8226-v2-mtp.dts
+++ b/arch/arm/boot/dts/msm8226-v2-1080p-mtp.dts
@@ -12,11 +12,11 @@
/dts-v1/;
/include/ "msm8226-v2.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-1080p-mtp.dtsi"
/include/ "msm8226-camera-sensor-mtp.dtsi"
/ {
model = "Qualcomm MSM 8226v2 MTP";
compatible = "qcom,msm8226-mtp", "qcom,msm8226", "qcom,mtp";
- qcom,board-id = <8 0>;
+ qcom,board-id = <8 2>;
};
diff --git a/arch/arm/boot/dts/msm8226-v2-cdp.dts b/arch/arm/boot/dts/msm8226-v2-720p-cdp.dts
similarity index 95%
rename from arch/arm/boot/dts/msm8226-v2-cdp.dts
rename to arch/arm/boot/dts/msm8226-v2-720p-cdp.dts
index 3302d26..966ae2b 100644
--- a/arch/arm/boot/dts/msm8226-v2-cdp.dts
+++ b/arch/arm/boot/dts/msm8226-v2-720p-cdp.dts
@@ -12,7 +12,7 @@
/dts-v1/;
/include/ "msm8226-v2.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-720p-cdp.dtsi"
/include/ "msm8226-camera-sensor-cdp.dtsi"
/ {
diff --git a/arch/arm/boot/dts/msm8226-v2-mtp.dts b/arch/arm/boot/dts/msm8226-v2-720p-mtp.dts
similarity index 95%
rename from arch/arm/boot/dts/msm8226-v2-mtp.dts
rename to arch/arm/boot/dts/msm8226-v2-720p-mtp.dts
index 6034107..0768b75 100644
--- a/arch/arm/boot/dts/msm8226-v2-mtp.dts
+++ b/arch/arm/boot/dts/msm8226-v2-720p-mtp.dts
@@ -12,7 +12,7 @@
/dts-v1/;
/include/ "msm8226-v2.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-720p-mtp.dtsi"
/include/ "msm8226-camera-sensor-mtp.dtsi"
/ {
diff --git a/arch/arm/boot/dts/msm8926-cdp.dts b/arch/arm/boot/dts/msm8926-1080p-cdp.dts
similarity index 93%
copy from arch/arm/boot/dts/msm8926-cdp.dts
copy to arch/arm/boot/dts/msm8926-1080p-cdp.dts
index d6e70e6..33e484a 100644
--- a/arch/arm/boot/dts/msm8926-cdp.dts
+++ b/arch/arm/boot/dts/msm8926-1080p-cdp.dts
@@ -13,13 +13,13 @@
/dts-v1/;
/include/ "msm8926.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-1080p-cdp.dtsi"
/include/ "msm8226-camera-sensor-cdp.dtsi"
/ {
model = "Qualcomm MSM 8926 CDP";
compatible = "qcom,msm8926-cdp", "qcom,msm8926", "qcom,cdp";
- qcom,board-id = <1 0>;
+ qcom,board-id = <1 2>;
};
&pm8226_chg {
diff --git a/arch/arm/boot/dts/msm8926-mtp.dts b/arch/arm/boot/dts/msm8926-1080p-mtp.dts
similarity index 92%
copy from arch/arm/boot/dts/msm8926-mtp.dts
copy to arch/arm/boot/dts/msm8926-1080p-mtp.dts
index 624781b..c1217a2 100644
--- a/arch/arm/boot/dts/msm8926-mtp.dts
+++ b/arch/arm/boot/dts/msm8926-1080p-mtp.dts
@@ -13,11 +13,11 @@
/dts-v1/;
/include/ "msm8926.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-1080p-mtp.dtsi"
/include/ "msm8226-camera-sensor-mtp.dtsi"
/ {
model = "Qualcomm MSM 8926 MTP";
compatible = "qcom,msm8926-mtp", "qcom,msm8926", "qcom,mtp";
- qcom,board-id = <8 0>;
+ qcom,board-id = <8 2>;
};
diff --git a/arch/arm/boot/dts/msm8926-cdp.dts b/arch/arm/boot/dts/msm8926-720p-cdp.dts
similarity index 96%
rename from arch/arm/boot/dts/msm8926-cdp.dts
rename to arch/arm/boot/dts/msm8926-720p-cdp.dts
index d6e70e6..80bb5e6 100644
--- a/arch/arm/boot/dts/msm8926-cdp.dts
+++ b/arch/arm/boot/dts/msm8926-720p-cdp.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "msm8926.dtsi"
-/include/ "msm8226-cdp.dtsi"
+/include/ "msm8226-720p-cdp.dtsi"
/include/ "msm8226-camera-sensor-cdp.dtsi"
/ {
diff --git a/arch/arm/boot/dts/msm8926-mtp.dts b/arch/arm/boot/dts/msm8926-720p-mtp.dts
similarity index 95%
rename from arch/arm/boot/dts/msm8926-mtp.dts
rename to arch/arm/boot/dts/msm8926-720p-mtp.dts
index 624781b..32301fd 100644
--- a/arch/arm/boot/dts/msm8926-mtp.dts
+++ b/arch/arm/boot/dts/msm8926-720p-mtp.dts
@@ -13,7 +13,7 @@
/dts-v1/;
/include/ "msm8926.dtsi"
-/include/ "msm8226-mtp.dtsi"
+/include/ "msm8226-720p-mtp.dtsi"
/include/ "msm8226-camera-sensor-mtp.dtsi"
/ {
diff --git a/arch/arm/mach-msm/Makefile.boot b/arch/arm/mach-msm/Makefile.boot
index 552ed16..83c1d4c 100644
--- a/arch/arm/mach-msm/Makefile.boot
+++ b/arch/arm/mach-msm/Makefile.boot
@@ -99,28 +99,34 @@
# MSM8226
zreladdr-$(CONFIG_ARCH_MSM8226) := 0x00008000
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-sim.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-fluid.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-cdp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-mtp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-qrd-evt.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-qrd-dvt.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-cdp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-mtp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-qrd-evt.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-qrd-dvt.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8926-cdp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8926-mtp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8926-qrd.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8926-qrd-skug.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-qrd-skuf.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-qrd-skuf.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v1-xpm.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v1-cdp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v1-mtp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-xpm.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-cdp.dtb
- dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-sim.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-fluid.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-qrd-evt.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-qrd-dvt.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-720p-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-1080p-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-720p-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-1080p-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-qrd-evt.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-qrd-dvt.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8926-720p-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8926-1080p-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8926-720p-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8926-1080p-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8926-qrd.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8926-qrd-skug.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v1-qrd-skuf.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += msm8226-v2-qrd-skuf.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v1-xpm.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v1-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v1-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-xpm.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-720p-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-1080p-cdp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-720p-mtp.dtb
+ dtb-$(CONFIG_ARCH_MSM8226) += apq8026-v2-1080p-mtp.dtb
# FSM9XXX
zreladdr-$(CONFIG_ARCH_FSM9XXX) := 0x10008000