[SCSI] Merge branch 'linus'
Conflicts:
drivers/message/fusion/mptsas.c
fixed up conflict between req->data_len accessors and mptsas driver updates.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 75223f5..0ba6ec8 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -257,11 +257,8 @@
{
struct iscsi_iser_task *iser_task = task->dd_data;
- /*
- * mgmt tasks do not need special cleanup and we do not
- * allocate anything in the init task callout
- */
- if (!task->sc || task->state == ISCSI_TASK_PENDING)
+ /* mgmt tasks do not need special cleanup */
+ if (!task->sc)
return;
if (iser_task->status == ISER_TASK_STATUS_STARTED) {
@@ -517,7 +514,8 @@
}
static struct iscsi_endpoint *
-iscsi_iser_ep_connect(struct sockaddr *dst_addr, int non_blocking)
+iscsi_iser_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
+ int non_blocking)
{
int err;
struct iser_conn *ib_conn;
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 5d496a9..44b9315 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -146,7 +146,6 @@
static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
-static DECLARE_WAIT_QUEUE_HEAD(mpt_waitq);
/*
* Driver Callback Index's
@@ -159,7 +158,8 @@
* Forward protos...
*/
static irqreturn_t mpt_interrupt(int irq, void *bus_id);
-static int mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
+static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+ MPT_FRAME_HDR *reply);
static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
u32 *req, int replyBytes, u16 *u16reply, int maxwait,
int sleepFlag);
@@ -190,9 +190,9 @@
static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
-static void mpt_timer_expired(unsigned long data);
static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
-static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch);
+static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
+ int sleepFlag);
static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
@@ -207,8 +207,8 @@
#endif
static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
-//int mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag);
-static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *evReply, int *evHandlers);
+static int ProcessEventNotification(MPT_ADAPTER *ioc,
+ EventNotificationReply_t *evReply, int *evHandlers);
static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
@@ -277,6 +277,56 @@
}
/**
+ * mpt_is_discovery_complete - determine if discovery has completed
+ * @ioc: per adatper instance
+ *
+ * Returns 1 when discovery completed, else zero.
+ */
+static int
+mpt_is_discovery_complete(MPT_ADAPTER *ioc)
+{
+ ConfigExtendedPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ SasIOUnitPage0_t *buffer;
+ dma_addr_t dma_handle;
+ int rc = 0;
+
+ memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
+ memset(&cfg, 0, sizeof(CONFIGPARMS));
+ hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
+ hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
+ cfg.cfghdr.ehdr = &hdr;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if ((mpt_config(ioc, &cfg)))
+ goto out;
+ if (!hdr.ExtPageLength)
+ goto out;
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ &dma_handle);
+ if (!buffer)
+ goto out;
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if ((mpt_config(ioc, &cfg)))
+ goto out_free_consistent;
+
+ if (!(buffer->PhyData[0].PortFlags &
+ MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
+ rc = 1;
+
+ out_free_consistent:
+ pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
+ buffer, dma_handle);
+ out:
+ return rc;
+}
+
+/**
* mpt_fault_reset_work - work performed on workq after ioc fault
* @work: input argument, used to derive ioc
*
@@ -290,7 +340,7 @@
int rc;
unsigned long flags;
- if (ioc->diagPending || !ioc->active)
+ if (ioc->ioc_reset_in_progress || !ioc->active)
goto out;
ioc_raw_state = mpt_GetIocState(ioc, 0);
@@ -307,6 +357,12 @@
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
"reset (%04xh)\n", ioc->name, ioc_raw_state &
MPI_DOORBELL_DATA_MASK);
+ } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
+ if ((mpt_is_discovery_complete(ioc))) {
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
+ "discovery_quiesce_io flag\n", ioc->name));
+ ioc->sas_discovery_quiesce_io = 0;
+ }
}
out:
@@ -317,11 +373,11 @@
ioc = ioc->alt_ioc;
/* rearm the timer */
- spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
if (ioc->reset_work_q)
queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
msecs_to_jiffies(MPT_POLLING_INTERVAL));
- spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
}
@@ -501,9 +557,9 @@
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_base_reply - MPT base driver's callback routine
+ * mptbase_reply - MPT base driver's callback routine
* @ioc: Pointer to MPT_ADAPTER structure
- * @mf: Pointer to original MPT request frame
+ * @req: Pointer to original MPT request frame
* @reply: Pointer to MPT reply frame (NULL if TurboReply)
*
* MPT base driver's callback routine; all base driver
@@ -514,122 +570,49 @@
* should be freed, or 0 if it shouldn't.
*/
static int
-mpt_base_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *reply)
+mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
{
+ EventNotificationReply_t *pEventReply;
+ u8 event;
+ int evHandlers;
int freereq = 1;
- u8 func;
- dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply() called\n", ioc->name));
-#ifdef CONFIG_FUSION_LOGGING
- if ((ioc->debug_level & MPT_DEBUG_MSG_FRAME) &&
- !(reply->u.hdr.MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)) {
- dmfprintk(ioc, printk(MYIOC_s_INFO_FMT ": Original request frame (@%p) header\n",
- ioc->name, mf));
- DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)mf);
- }
-#endif
-
- func = reply->u.hdr.Function;
- dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, Function=%02Xh\n",
- ioc->name, func));
-
- if (func == MPI_FUNCTION_EVENT_NOTIFICATION) {
- EventNotificationReply_t *pEvReply = (EventNotificationReply_t *) reply;
- int evHandlers = 0;
- int results;
-
- results = ProcessEventNotification(ioc, pEvReply, &evHandlers);
- if (results != evHandlers) {
- /* CHECKME! Any special handling needed here? */
- devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Called %d event handlers, sum results = %d\n",
- ioc->name, evHandlers, results));
- }
-
- /*
- * Hmmm... It seems that EventNotificationReply is an exception
- * to the rule of one reply per request.
- */
- if (pEvReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY) {
+ switch (reply->u.hdr.Function) {
+ case MPI_FUNCTION_EVENT_NOTIFICATION:
+ pEventReply = (EventNotificationReply_t *)reply;
+ evHandlers = 0;
+ ProcessEventNotification(ioc, pEventReply, &evHandlers);
+ event = le32_to_cpu(pEventReply->Event) & 0xFF;
+ if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
freereq = 0;
- } else {
- devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "EVENT_NOTIFICATION reply %p returns Request frame\n",
- ioc->name, pEvReply));
+ if (event != MPI_EVENT_EVENT_CHANGE)
+ break;
+ case MPI_FUNCTION_CONFIG:
+ case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
+ ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+ if (reply) {
+ ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->mptbase_cmds.reply, reply,
+ min(MPT_DEFAULT_FRAME_SIZE,
+ 4 * reply->u.reply.MsgLength));
}
-
-#ifdef CONFIG_PROC_FS
-// LogEvent(ioc, pEvReply);
-#endif
-
- } else if (func == MPI_FUNCTION_EVENT_ACK) {
- dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_base_reply, EventAck reply received\n",
- ioc->name));
- } else if (func == MPI_FUNCTION_CONFIG) {
- CONFIGPARMS *pCfg;
- unsigned long flags;
-
- dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "config_complete (mf=%p,mr=%p)\n",
- ioc->name, mf, reply));
-
- pCfg = * ((CONFIGPARMS **)((u8 *) mf + ioc->req_sz - sizeof(void *)));
-
- if (pCfg) {
- /* disable timer and remove from linked list */
- del_timer(&pCfg->timer);
-
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- list_del(&pCfg->linkage);
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- /*
- * If IOC Status is SUCCESS, save the header
- * and set the status code to GOOD.
- */
- pCfg->status = MPT_CONFIG_ERROR;
- if (reply) {
- ConfigReply_t *pReply = (ConfigReply_t *)reply;
- u16 status;
-
- status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
- dcprintk(ioc, printk(MYIOC_s_NOTE_FMT " IOCStatus=%04xh, IOCLogInfo=%08xh\n",
- ioc->name, status, le32_to_cpu(pReply->IOCLogInfo)));
-
- pCfg->status = status;
- if (status == MPI_IOCSTATUS_SUCCESS) {
- if ((pReply->Header.PageType &
- MPI_CONFIG_PAGETYPE_MASK) ==
- MPI_CONFIG_PAGETYPE_EXTENDED) {
- pCfg->cfghdr.ehdr->ExtPageLength =
- le16_to_cpu(pReply->ExtPageLength);
- pCfg->cfghdr.ehdr->ExtPageType =
- pReply->ExtPageType;
- }
- pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
-
- /* If this is a regular header, save PageLength. */
- /* LMP Do this better so not using a reserved field! */
- pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
- pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
- pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
- }
- }
-
- /*
- * Wake up the original calling thread
- */
- pCfg->wait_done = 1;
- wake_up(&mpt_waitq);
- }
- } else if (func == MPI_FUNCTION_SAS_IO_UNIT_CONTROL) {
- /* we should be always getting a reply frame */
- memcpy(ioc->persist_reply_frame, reply,
- min(MPT_DEFAULT_FRAME_SIZE,
- 4*reply->u.reply.MsgLength));
- del_timer(&ioc->persist_timer);
- ioc->persist_wait_done = 1;
- wake_up(&mpt_waitq);
- } else {
- printk(MYIOC_s_ERR_FMT "Unexpected msg function (=%02Xh) reply received!\n",
- ioc->name, func);
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->mptbase_cmds.done);
+ } else
+ freereq = 0;
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
+ freereq = 1;
+ break;
+ case MPI_FUNCTION_EVENT_ACK:
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "EventAck reply received\n", ioc->name));
+ break;
+ default:
+ printk(MYIOC_s_ERR_FMT
+ "Unexpected msg function (=%02Xh) reply received!\n",
+ ioc->name, reply->u.hdr.Function);
+ break;
}
/*
@@ -988,17 +971,21 @@
/* Put Request back on FreeQ! */
spin_lock_irqsave(&ioc->FreeQlock, flags);
- mf->u.frame.linkage.arg1 = 0xdeadbeaf; /* signature to know if this mf is freed */
+ if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
+ goto out;
+ /* signature to know if this mf is freed */
+ mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
#ifdef MFCNT
ioc->mfcnt--;
#endif
+ out:
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mpt_add_sge - Place a simple SGE at address pAddr.
+ * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
* @pAddr: virtual address for SGE
* @flagslength: SGE flags and data transfer length
* @dma_addr: Physical address
@@ -1006,23 +993,117 @@
* This routine places a MPT request frame back on the MPT adapter's
* FreeQ.
*/
-void
-mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
+static void
+mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
{
- if (sizeof(dma_addr_t) == sizeof(u64)) {
- SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+ SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
+ pSge->FlagsLength = cpu_to_le32(flagslength);
+ pSge->Address = cpu_to_le32(dma_addr);
+}
+
+/**
+ * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @flagslength: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ **/
+static void
+mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+ SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+ pSge->Address.Low = cpu_to_le32
+ (lower_32_bits((unsigned long)(dma_addr)));
+ pSge->Address.High = cpu_to_le32
+ (upper_32_bits((unsigned long)dma_addr));
+ pSge->FlagsLength = cpu_to_le32
+ ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/**
+ * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr
+ * (1078 workaround).
+ * @pAddr: virtual address for SGE
+ * @flagslength: SGE flags and data transfer length
+ * @dma_addr: Physical address
+ *
+ * This routine places a MPT request frame back on the MPT adapter's
+ * FreeQ.
+ **/
+static void
+mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
+{
+ SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
+ u32 tmp;
+
+ pSge->Address.Low = cpu_to_le32
+ (lower_32_bits((unsigned long)(dma_addr)));
+ tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+
+ /*
+ * 1078 errata workaround for the 36GB limitation
+ */
+ if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
+ flagslength |=
+ MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
+ tmp |= (1<<31);
+ if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
+ printk(KERN_DEBUG "1078 P0M2 addressing for "
+ "addr = 0x%llx len = %d\n",
+ (unsigned long long)dma_addr,
+ MPI_SGE_LENGTH(flagslength));
+ }
+
+ pSge->Address.High = cpu_to_le32(tmp);
+ pSge->FlagsLength = cpu_to_le32(
+ (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @next: nextChainOffset value (u32's)
+ * @length: length of next SGL segment
+ * @dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+ SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
+ pChain->Length = cpu_to_le16(length);
+ pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
+ pChain->NextChainOffset = next;
+ pChain->Address = cpu_to_le32(dma_addr);
+}
+
+/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+/**
+ * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
+ * @pAddr: virtual address for SGE
+ * @next: nextChainOffset value (u32's)
+ * @length: length of next SGL segment
+ * @dma_addr: Physical address
+ *
+ */
+static void
+mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
+{
+ SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
u32 tmp = dma_addr & 0xFFFFFFFF;
- pSge->FlagsLength = cpu_to_le32(flagslength);
- pSge->Address.Low = cpu_to_le32(tmp);
- tmp = (u32) ((u64)dma_addr >> 32);
- pSge->Address.High = cpu_to_le32(tmp);
+ pChain->Length = cpu_to_le16(length);
+ pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
+ MPI_SGE_FLAGS_64_BIT_ADDRESSING);
- } else {
- SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
- pSge->FlagsLength = cpu_to_le32(flagslength);
- pSge->Address = cpu_to_le32(dma_addr);
- }
+ pChain->NextChainOffset = next;
+
+ pChain->Address.Low = cpu_to_le32(tmp);
+ tmp = (u32)(upper_32_bits((unsigned long)dma_addr));
+ pChain->Address.High = cpu_to_le32(tmp);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1225,7 +1306,7 @@
}
flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
flags_length |= ioc->HostPageBuffer_sz;
- mpt_add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
+ ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
return 0;
@@ -1534,21 +1615,42 @@
pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
- && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
- ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
- ioc->name));
- } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
- && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
- ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
- ioc->name));
+ if (sizeof(dma_addr_t) > 4) {
+ const uint64_t required_mask = dma_get_required_mask
+ (&pdev->dev);
+ if (required_mask > DMA_BIT_MASK(32)
+ && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(64))) {
+ ioc->dma_mask = DMA_BIT_MASK(64);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(32))) {
+ ioc->dma_mask = DMA_BIT_MASK(32);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else {
+ printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+ ioc->name, pci_name(pdev));
+ return r;
+ }
} else {
- printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
- ioc->name, pci_name(pdev));
- pci_release_selected_regions(pdev, ioc->bars);
- return r;
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(32))) {
+ ioc->dma_mask = DMA_BIT_MASK(32);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
+ ioc->name));
+ } else {
+ printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
+ ioc->name, pci_name(pdev));
+ return r;
+ }
}
mem_phys = msize = 0;
@@ -1632,6 +1734,7 @@
ioc->id = mpt_ids++;
sprintf(ioc->name, "ioc%d", ioc->id);
+ dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
/*
* set initial debug level
@@ -1650,14 +1753,36 @@
return r;
}
+ /*
+ * Setting up proper handlers for scatter gather handling
+ */
+ if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+ if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+ ioc->add_sge = &mpt_add_sge_64bit_1078;
+ else
+ ioc->add_sge = &mpt_add_sge_64bit;
+ ioc->add_chain = &mpt_add_chain_64bit;
+ ioc->sg_addr_size = 8;
+ } else {
+ ioc->add_sge = &mpt_add_sge;
+ ioc->add_chain = &mpt_add_chain;
+ ioc->sg_addr_size = 4;
+ }
+ ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
ioc->alloc_total = sizeof(MPT_ADAPTER);
ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
ioc->pcidev = pdev;
- ioc->diagPending = 0;
- spin_lock_init(&ioc->diagLock);
- spin_lock_init(&ioc->initializing_hba_lock);
+
+ spin_lock_init(&ioc->taskmgmt_lock);
+ mutex_init(&ioc->internal_cmds.mutex);
+ init_completion(&ioc->internal_cmds.done);
+ mutex_init(&ioc->mptbase_cmds.mutex);
+ init_completion(&ioc->mptbase_cmds.done);
+ mutex_init(&ioc->taskmgmt_cmds.mutex);
+ init_completion(&ioc->taskmgmt_cmds.done);
/* Initialize the event logging.
*/
@@ -1670,16 +1795,13 @@
ioc->mfcnt = 0;
#endif
+ ioc->sh = NULL;
ioc->cached_fw = NULL;
/* Initilize SCSI Config Data structure
*/
memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
- /* Initialize the running configQ head.
- */
- INIT_LIST_HEAD(&ioc->configQ);
-
/* Initialize the fc rport list head.
*/
INIT_LIST_HEAD(&ioc->fc_rports);
@@ -1690,9 +1812,8 @@
/* Initialize workqueue */
INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
- spin_lock_init(&ioc->fault_reset_work_lock);
- snprintf(ioc->reset_work_q_name, sizeof(ioc->reset_work_q_name),
+ snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
"mpt_poll_%d", ioc->id);
ioc->reset_work_q =
create_singlethread_workqueue(ioc->reset_work_q_name);
@@ -1767,11 +1888,14 @@
case MPI_MANUFACTPAGE_DEVID_SAS1064:
case MPI_MANUFACTPAGE_DEVID_SAS1068:
ioc->errata_flag_1064 = 1;
+ ioc->bus_type = SAS;
+ break;
case MPI_MANUFACTPAGE_DEVID_SAS1064E:
case MPI_MANUFACTPAGE_DEVID_SAS1068E:
case MPI_MANUFACTPAGE_DEVID_SAS1078:
ioc->bus_type = SAS;
+ break;
}
@@ -1813,6 +1937,11 @@
*/
mpt_detect_bound_ports(ioc, pdev);
+ INIT_LIST_HEAD(&ioc->fw_event_list);
+ spin_lock_init(&ioc->fw_event_lock);
+ snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
+ ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
+
if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
CAN_SLEEP)) != 0){
printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
@@ -1885,13 +2014,18 @@
/*
* Stop polling ioc for fault condition
*/
- spin_lock_irqsave(&ioc->fault_reset_work_lock, flags);
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
wq = ioc->reset_work_q;
ioc->reset_work_q = NULL;
- spin_unlock_irqrestore(&ioc->fault_reset_work_lock, flags);
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
cancel_delayed_work(&ioc->fault_reset_work);
destroy_workqueue(wq);
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ wq = ioc->fw_event_q;
+ ioc->fw_event_q = NULL;
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+ destroy_workqueue(wq);
sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
remove_proc_entry(pname, NULL);
@@ -1994,6 +2128,21 @@
if (err)
return err;
+ if (ioc->dma_mask == DMA_BIT_MASK(64)) {
+ if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
+ ioc->add_sge = &mpt_add_sge_64bit_1078;
+ else
+ ioc->add_sge = &mpt_add_sge_64bit;
+ ioc->add_chain = &mpt_add_chain_64bit;
+ ioc->sg_addr_size = 8;
+ } else {
+
+ ioc->add_sge = &mpt_add_sge;
+ ioc->add_chain = &mpt_add_chain;
+ ioc->sg_addr_size = 4;
+ }
+ ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
+
printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
CHIPREG_READ32(&ioc->chip->Doorbell));
@@ -2091,12 +2240,16 @@
ioc->active = 0;
if (ioc->alt_ioc) {
- if (ioc->alt_ioc->active)
+ if (ioc->alt_ioc->active ||
+ reason == MPT_HOSTEVENT_IOC_RECOVER) {
reset_alt_ioc_active = 1;
-
- /* Disable alt-IOC's reply interrupts (and FreeQ) for a bit ... */
- CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, 0xFFFFFFFF);
- ioc->alt_ioc->active = 0;
+ /* Disable alt-IOC's reply interrupts
+ * (and FreeQ) for a bit
+ **/
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+ 0xFFFFFFFF);
+ ioc->alt_ioc->active = 0;
+ }
}
hard = 1;
@@ -2117,9 +2270,11 @@
}
} else {
- printk(MYIOC_s_WARN_FMT "NOT READY!\n", ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ "NOT READY WARNING!\n", ioc->name);
}
- return -1;
+ ret = -1;
+ goto out;
}
/* hard_reset_done = 0 if a soft reset was performed
@@ -2129,7 +2284,9 @@
if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
alt_ioc_ready = 1;
else
- printk(MYIOC_s_WARN_FMT "alt_ioc not ready!\n", ioc->alt_ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc Not ready WARNING!\n",
+ ioc->alt_ioc->name);
}
for (ii=0; ii<5; ii++) {
@@ -2150,7 +2307,8 @@
if (alt_ioc_ready) {
if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "Initial Alt IocFacts failed rc=%x\n", ioc->name, rc));
+ "Initial Alt IocFacts failed rc=%x\n",
+ ioc->name, rc));
/* Retry - alt IOC was initialized once
*/
rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
@@ -2194,16 +2352,20 @@
IRQF_SHARED, ioc->name, ioc);
if (rc < 0) {
printk(MYIOC_s_ERR_FMT "Unable to allocate "
- "interrupt %d!\n", ioc->name, ioc->pcidev->irq);
+ "interrupt %d!\n",
+ ioc->name, ioc->pcidev->irq);
if (ioc->msi_enable)
pci_disable_msi(ioc->pcidev);
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
irq_allocated = 1;
ioc->pci_irq = ioc->pcidev->irq;
pci_set_master(ioc->pcidev); /* ?? */
- dprintk(ioc, printk(MYIOC_s_INFO_FMT "installed at interrupt "
- "%d\n", ioc->name, ioc->pcidev->irq));
+ pci_set_drvdata(ioc->pcidev, ioc);
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "installed at interrupt %d\n", ioc->name,
+ ioc->pcidev->irq));
}
}
@@ -2212,17 +2374,22 @@
* init as upper addresses are needed for init.
* If fails, continue with alt-ioc processing
*/
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
+ ioc->name));
if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
ret = -3;
/* May need to check/upload firmware & data here!
* If fails, continue with alt-ioc processing
*/
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
+ ioc->name));
if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
ret = -4;
// NEW!
if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
- printk(MYIOC_s_WARN_FMT ": alt_ioc (%d) FIFO mgmt alloc!\n",
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
ioc->alt_ioc->name, rc);
alt_ioc_ready = 0;
reset_alt_ioc_active = 0;
@@ -2232,8 +2399,9 @@
if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
alt_ioc_ready = 0;
reset_alt_ioc_active = 0;
- printk(MYIOC_s_WARN_FMT "alt_ioc (%d) init failure!\n",
- ioc->alt_ioc->name, rc);
+ printk(MYIOC_s_WARN_FMT
+ ": alt-ioc: (%d) init failure WARNING!\n",
+ ioc->alt_ioc->name, rc);
}
}
@@ -2269,28 +2437,36 @@
}
}
+ /* Enable MPT base driver management of EventNotification
+ * and EventAck handling.
+ */
+ if ((ret == 0) && (!ioc->facts.EventState)) {
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "SendEventNotification\n",
+ ioc->name));
+ ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
+ }
+
+ if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
+ rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
+
if (ret == 0) {
/* Enable! (reply interrupt) */
CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
ioc->active = 1;
}
-
- if (reset_alt_ioc_active && ioc->alt_ioc) {
- /* (re)Enable alt-IOC! (reply interrupt) */
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "alt_ioc reply irq re-enabled\n",
- ioc->alt_ioc->name));
- CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
- ioc->alt_ioc->active = 1;
+ if (rc == 0) { /* alt ioc */
+ if (reset_alt_ioc_active && ioc->alt_ioc) {
+ /* (re)Enable alt-IOC! (reply interrupt) */
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
+ "reply irq re-enabled\n",
+ ioc->alt_ioc->name));
+ CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
+ MPI_HIM_DIM);
+ ioc->alt_ioc->active = 1;
+ }
}
- /* Enable MPT base driver management of EventNotification
- * and EventAck handling.
- */
- if ((ret == 0) && (!ioc->facts.EventState))
- (void) SendEventNotification(ioc, 1); /* 1=Enable EventNotification */
-
- if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
- (void) SendEventNotification(ioc->alt_ioc, 1); /* 1=Enable EventNotification */
/* Add additional "reason" check before call to GetLanConfigPages
* (combined with GetIoUnitPage2 call). This prevents a somewhat
@@ -2306,8 +2482,9 @@
mutex_init(&ioc->raid_data.inactive_list_mutex);
INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
- if (ioc->bus_type == SAS) {
+ switch (ioc->bus_type) {
+ case SAS:
/* clear persistency table */
if(ioc->facts.IOCExceptions &
MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
@@ -2321,8 +2498,15 @@
*/
mpt_findImVolumes(ioc);
- } else if (ioc->bus_type == FC) {
- if ((ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) &&
+ /* Check, and possibly reset, the coalescing value
+ */
+ mpt_read_ioc_pg_1(ioc);
+
+ break;
+
+ case FC:
+ if ((ioc->pfacts[0].ProtocolFlags &
+ MPI_PORTFACTS_PROTOCOL_LAN) &&
(ioc->lan_cnfg_page0.Header.PageLength == 0)) {
/*
* Pre-fetch the ports LAN MAC address!
@@ -2331,11 +2515,14 @@
(void) GetLanConfigPages(ioc);
a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
- ioc->name, a[5], a[4], a[3], a[2], a[1], a[0]));
-
+ "LanAddr = %02X:%02X:%02X"
+ ":%02X:%02X:%02X\n",
+ ioc->name, a[5], a[4],
+ a[3], a[2], a[1], a[0]));
}
- } else {
+ break;
+
+ case SPI:
/* Get NVRAM and adapter maximums from SPP 0 and 2
*/
mpt_GetScsiPortSettings(ioc, 0);
@@ -2354,6 +2541,8 @@
mpt_read_ioc_pg_1(ioc);
mpt_read_ioc_pg_4(ioc);
+
+ break;
}
GetIoUnitPage2(ioc);
@@ -2435,16 +2624,20 @@
if (_pcidev == peer) {
/* Paranoia checks */
if (ioc->alt_ioc != NULL) {
- printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
- ioc->name, ioc->alt_ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ "Oops, already bound (%s <==> %s)!\n",
+ ioc->name, ioc->name, ioc->alt_ioc->name);
break;
} else if (ioc_srch->alt_ioc != NULL) {
- printk(MYIOC_s_WARN_FMT "Oops, already bound to %s!\n",
- ioc_srch->name, ioc_srch->alt_ioc->name);
+ printk(MYIOC_s_WARN_FMT
+ "Oops, already bound (%s <==> %s)!\n",
+ ioc_srch->name, ioc_srch->name,
+ ioc_srch->alt_ioc->name);
break;
}
- dprintk(ioc, printk(MYIOC_s_INFO_FMT "FOUND! binding to %s\n",
- ioc->name, ioc_srch->name));
+ dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "FOUND! binding %s <==> %s\n",
+ ioc->name, ioc->name, ioc_srch->name));
ioc_srch->alt_ioc = ioc;
ioc->alt_ioc = ioc_srch;
}
@@ -2464,8 +2657,8 @@
int ret;
if (ioc->cached_fw != NULL) {
- ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: Pushing FW onto "
- "adapter\n", __func__, ioc->name));
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Pushing FW onto adapter\n", __func__, ioc->name));
if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
ioc->cached_fw, CAN_SLEEP)) < 0) {
printk(MYIOC_s_WARN_FMT
@@ -2474,11 +2667,30 @@
}
}
+ /*
+ * Put the controller into ready state (if its not already)
+ */
+ if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
+ if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
+ CAN_SLEEP)) {
+ if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
+ printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
+ "reset failed to put ioc in ready state!\n",
+ ioc->name, __func__);
+ } else
+ printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
+ "failed!\n", ioc->name, __func__);
+ }
+
+
/* Disable adapter interrupts! */
+ synchronize_irq(ioc->pcidev->irq);
CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
ioc->active = 0;
+
/* Clear any lingering interrupt */
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
+ CHIPREG_READ32(&ioc->chip->IntStatus);
if (ioc->alloc != NULL) {
sz = ioc->alloc_sz;
@@ -2538,19 +2750,22 @@
if((ret = mpt_host_page_access_control(ioc,
MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
printk(MYIOC_s_ERR_FMT
- "host page buffers free failed (%d)!\n",
- ioc->name, ret);
+ ": %s: host page buffers free failed (%d)!\n",
+ ioc->name, __func__, ret);
}
- dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "HostPageBuffer free @ %p, sz=%d bytes\n",
- ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_sz));
+ dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "HostPageBuffer free @ %p, sz=%d bytes\n",
+ ioc->name, ioc->HostPageBuffer,
+ ioc->HostPageBuffer_sz));
pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
ioc->HostPageBuffer = NULL;
ioc->HostPageBuffer_sz = 0;
ioc->alloc_total -= ioc->HostPageBuffer_sz;
}
-}
+ pci_set_drvdata(ioc->pcidev, NULL);
+}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* mpt_adapter_dispose - Free all resources associated with an MPT adapter
@@ -2690,8 +2905,12 @@
}
/* Is it already READY? */
- if (!statefault && (ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)
+ if (!statefault &&
+ ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
+ dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
+ "IOC is in READY state\n", ioc->name));
return 0;
+ }
/*
* Check to see if IOC is in FAULT state.
@@ -2764,8 +2983,9 @@
ii++; cntdn--;
if (!cntdn) {
- printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
- ioc->name, (int)((ii+5)/HZ));
+ printk(MYIOC_s_ERR_FMT
+ "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+ ioc->name, ioc_state, (int)((ii+5)/HZ));
return -ETIME;
}
@@ -2778,9 +2998,8 @@
}
if (statefault < 3) {
- printk(MYIOC_s_INFO_FMT "Recovered from %s\n",
- ioc->name,
- statefault==1 ? "stuck handshake" : "IOC FAULT");
+ printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
+ statefault == 1 ? "stuck handshake" : "IOC FAULT");
}
return hard_reset_done;
@@ -2833,8 +3052,9 @@
/* IOC *must* NOT be in RESET state! */
if (ioc->last_state == MPI_IOC_STATE_RESET) {
- printk(MYIOC_s_ERR_FMT "Can't get IOCFacts NOT READY! (%08x)\n",
- ioc->name, ioc->last_state );
+ printk(KERN_ERR MYNAM
+ ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
+ ioc->name, ioc->last_state);
return -44;
}
@@ -2896,7 +3116,7 @@
* Old: u16{Major(4),Minor(4),SubMinor(8)}
* New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
*/
- if (facts->MsgVersion < 0x0102) {
+ if (facts->MsgVersion < MPI_VERSION_01_02) {
/*
* Handle old FC f/w style, convert to new...
*/
@@ -2908,9 +3128,11 @@
facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
facts->ProductID = le16_to_cpu(facts->ProductID);
+
if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
> MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
ioc->ir_firmware = 1;
+
facts->CurrentHostMfaHighAddr =
le32_to_cpu(facts->CurrentHostMfaHighAddr);
facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
@@ -2926,7 +3148,7 @@
* to 14 in MPI-1.01.0x.
*/
if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
- facts->MsgVersion > 0x0100) {
+ facts->MsgVersion > MPI_VERSION_01_00) {
facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
}
@@ -3108,6 +3330,7 @@
ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
ioc_init.MaxBuses = (U8)ioc->number_of_buses;
+
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
ioc->name, ioc->facts.MsgVersion));
if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
@@ -3122,7 +3345,7 @@
}
ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
- if (sizeof(dma_addr_t) == sizeof(u64)) {
+ if (ioc->sg_addr_size == sizeof(u64)) {
/* Save the upper 32-bits of the request
* (reply) and sense buffers.
*/
@@ -3325,11 +3548,10 @@
FWUpload_t *prequest;
FWUploadReply_t *preply;
FWUploadTCSGE_t *ptcsge;
- int sgeoffset;
u32 flagsLength;
int ii, sz, reply_sz;
int cmdStatus;
-
+ int request_size;
/* If the image size is 0, we are done.
*/
if ((sz = ioc->facts.FWImageSize) == 0)
@@ -3364,42 +3586,41 @@
ptcsge->ImageSize = cpu_to_le32(sz);
ptcsge++;
- sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) + sizeof(FWUploadTCSGE_t);
-
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
- mpt_add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
-
- sgeoffset += sizeof(u32) + sizeof(dma_addr_t);
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": Sending FW Upload (req @ %p) sgeoffset=%d \n",
- ioc->name, prequest, sgeoffset));
+ ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
+ request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
+ ioc->SGE_size;
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
+ " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
+ ioc->facts.FWImageSize, request_size));
DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
- ii = mpt_handshake_req_reply_wait(ioc, sgeoffset, (u32*)prequest,
- reply_sz, (u16*)preply, 65 /*seconds*/, sleepFlag);
+ ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
+ reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
- dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Upload completed rc=%x \n", ioc->name, ii));
+ dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
+ "rc=%x \n", ioc->name, ii));
cmdStatus = -EFAULT;
if (ii == 0) {
/* Handshake transfer was complete and successful.
* Check the Reply Frame.
*/
- int status, transfer_sz;
- status = le16_to_cpu(preply->IOCStatus);
- if (status == MPI_IOCSTATUS_SUCCESS) {
- transfer_sz = le32_to_cpu(preply->ActualImageSize);
- if (transfer_sz == sz)
+ int status;
+ status = le16_to_cpu(preply->IOCStatus) &
+ MPI_IOCSTATUS_MASK;
+ if (status == MPI_IOCSTATUS_SUCCESS &&
+ ioc->facts.FWImageSize ==
+ le32_to_cpu(preply->ActualImageSize))
cmdStatus = 0;
- }
}
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
ioc->name, cmdStatus));
if (cmdStatus) {
-
- ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": fw upload failed, freeing image \n",
- ioc->name));
+ ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
+ "freeing image \n", ioc->name));
mpt_free_fw_memory(ioc);
}
kfree(prequest);
@@ -3723,6 +3944,10 @@
CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
+
+ if (!ignore)
+ return 0;
+
drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
"address=%p\n", ioc->name, __func__,
&ioc->chip->Doorbell, &ioc->chip->Reset_1078));
@@ -3740,6 +3965,7 @@
"looking for READY STATE: doorbell=%x"
" count=%d\n",
ioc->name, doorbell, count));
+
if (doorbell == MPI_IOC_STATE_READY) {
return 1;
}
@@ -3890,6 +4116,10 @@
doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
doorbell &= MPI_IOC_STATE_MASK;
+ drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "looking for READY STATE: doorbell=%x"
+ " count=%d\n", ioc->name, doorbell, count));
+
if (doorbell == MPI_IOC_STATE_READY) {
break;
}
@@ -3901,6 +4131,11 @@
mdelay (1000);
}
}
+
+ if (doorbell != MPI_IOC_STATE_READY)
+ printk(MYIOC_s_ERR_FMT "Failed to come READY "
+ "after reset! IocState=%x", ioc->name,
+ doorbell);
}
}
@@ -4019,8 +4254,9 @@
if (sleepFlag != CAN_SLEEP)
count *= 10;
- printk(MYIOC_s_ERR_FMT "Wait IOC_READY state timeout(%d)!\n",
- ioc->name, (int)((count+5)/HZ));
+ printk(MYIOC_s_ERR_FMT
+ "Wait IOC_READY state (0x%x) timeout(%d)!\n",
+ ioc->name, state, (int)((count+5)/HZ));
return -ETIME;
}
@@ -4090,24 +4326,29 @@
* num_sge = num sge in request frame + last chain buffer
* scale = num sge per chain buffer if no chain element
*/
- scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
- if (sizeof(dma_addr_t) == sizeof(u64))
- num_sge = scale + (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+ scale = ioc->req_sz / ioc->SGE_size;
+ if (ioc->sg_addr_size == sizeof(u64))
+ num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
else
- num_sge = 1+ scale + (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+ num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
- if (sizeof(dma_addr_t) == sizeof(u64)) {
+ if (ioc->sg_addr_size == sizeof(u64)) {
numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 60) / (sizeof(dma_addr_t) + sizeof(u32));
+ (ioc->req_sz - 60) / ioc->SGE_size;
} else {
- numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 64) / (sizeof(dma_addr_t) + sizeof(u32));
+ numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
+ scale + (ioc->req_sz - 64) / ioc->SGE_size;
}
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
ioc->name, num_sge, numSGE));
- if ( numSGE > MPT_SCSI_SG_DEPTH )
- numSGE = MPT_SCSI_SG_DEPTH;
+ if (ioc->bus_type == FC) {
+ if (numSGE > MPT_SCSI_FC_SG_DEPTH)
+ numSGE = MPT_SCSI_FC_SG_DEPTH;
+ } else {
+ if (numSGE > MPT_SCSI_SG_DEPTH)
+ numSGE = MPT_SCSI_SG_DEPTH;
+ }
num_chain = 1;
while (numSGE - num_sge > 0) {
@@ -4161,12 +4402,42 @@
dma_addr_t alloc_dma;
u8 *mem;
int i, reply_sz, sz, total_size, num_chain;
+ u64 dma_mask;
+
+ dma_mask = 0;
/* Prime reply FIFO... */
if (ioc->reply_frames == NULL) {
if ( (num_chain = initChainBuffers(ioc)) < 0)
return -1;
+ /*
+ * 1078 errata workaround for the 36GB limitation
+ */
+ if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
+ ioc->dma_mask > DMA_35BIT_MASK) {
+ if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(32))) {
+ dma_mask = DMA_35BIT_MASK;
+ d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "setting 35 bit addressing for "
+ "Request/Reply/Chain and Sense Buffers\n",
+ ioc->name));
+ } else {
+ /*Reseting DMA mask to 64 bit*/
+ pci_set_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64));
+ pci_set_consistent_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64));
+
+ printk(MYIOC_s_ERR_FMT
+ "failed setting 35 bit addressing for "
+ "Request/Reply/Chain and Sense Buffers\n",
+ ioc->name);
+ return -1;
+ }
+ }
total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
@@ -4305,9 +4576,16 @@
alloc_dma += ioc->reply_sz;
}
+ if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+ ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
+ ioc->dma_mask))
+ d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "restoring 64 bit addressing\n", ioc->name));
+
return 0;
out_fail:
+
if (ioc->alloc != NULL) {
sz = ioc->alloc_sz;
pci_free_consistent(ioc->pcidev,
@@ -4324,6 +4602,13 @@
ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
ioc->sense_buf_pool = NULL;
}
+
+ if (dma_mask == DMA_35BIT_MASK && !pci_set_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
+ DMA_BIT_MASK(64)))
+ d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "restoring 64 bit addressing\n", ioc->name));
+
return -1;
}
@@ -4759,7 +5044,14 @@
SasIoUnitControlReply_t *sasIoUnitCntrReply;
MPT_FRAME_HDR *mf = NULL;
MPIHeader_t *mpi_hdr;
+ int ret = 0;
+ unsigned long timeleft;
+ mutex_lock(&ioc->mptbase_cmds.mutex);
+
+ /* init the internal cmd struct */
+ memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+ INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
/* insure garbage is not sent to fw */
switch(persist_opcode) {
@@ -4769,17 +5061,19 @@
break;
default:
- return -1;
- break;
+ ret = -1;
+ goto out;
}
- printk("%s: persist_opcode=%x\n",__func__, persist_opcode);
+ printk(KERN_DEBUG "%s: persist_opcode=%x\n",
+ __func__, persist_opcode);
/* Get a MF for this command.
*/
if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- printk("%s: no msg frames!\n",__func__);
- return -1;
+ printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
+ ret = -1;
+ goto out;
}
mpi_hdr = (MPIHeader_t *) mf;
@@ -4789,27 +5083,42 @@
sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
sasIoUnitCntrReq->Operation = persist_opcode;
- init_timer(&ioc->persist_timer);
- ioc->persist_timer.data = (unsigned long) ioc;
- ioc->persist_timer.function = mpt_timer_expired;
- ioc->persist_timer.expires = jiffies + HZ*10 /* 10 sec */;
- ioc->persist_wait_done=0;
- add_timer(&ioc->persist_timer);
mpt_put_msg_frame(mpt_base_index, ioc, mf);
- wait_event(mpt_waitq, ioc->persist_wait_done);
-
- sasIoUnitCntrReply =
- (SasIoUnitControlReply_t *)ioc->persist_reply_frame;
- if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
- printk("%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
- __func__,
- sasIoUnitCntrReply->IOCStatus,
- sasIoUnitCntrReply->IOCLogInfo);
- return -1;
+ timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ printk(KERN_DEBUG "%s: failed\n", __func__);
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ if (!timeleft) {
+ printk(KERN_DEBUG "%s: Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ }
+ goto out;
}
- printk("%s: success\n",__func__);
- return 0;
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ ret = -1;
+ goto out;
+ }
+
+ sasIoUnitCntrReply =
+ (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
+ if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
+ printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
+ __func__, sasIoUnitCntrReply->IOCStatus,
+ sasIoUnitCntrReply->IOCLogInfo);
+ printk(KERN_DEBUG "%s: failed\n", __func__);
+ ret = -1;
+ } else
+ printk(KERN_DEBUG "%s: success\n", __func__);
+ out:
+
+ CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+ mutex_unlock(&ioc->mptbase_cmds.mutex);
+ return ret;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5394,17 +5703,20 @@
* -ENOMEM if pci_alloc failed
**/
int
-mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk)
+mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
+ RaidPhysDiskPage0_t *phys_disk)
{
- CONFIGPARMS cfg;
- ConfigPageHeader_t hdr;
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
dma_addr_t dma_handle;
pRaidPhysDiskPage0_t buffer = NULL;
int rc;
memset(&cfg, 0 , sizeof(CONFIGPARMS));
memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
+ hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
cfg.cfghdr.hdr = &hdr;
cfg.physAddr = -1;
@@ -5451,6 +5763,161 @@
}
/**
+ * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
+ * @ioc: Pointer to a Adapter Structure
+ * @phys_disk_num: io unit unique phys disk num generated by the ioc
+ *
+ * Return:
+ * returns number paths
+ **/
+int
+mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidPhysDiskPage1_t buffer = NULL;
+ int rc;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+
+ hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+ hdr.PageNumber = 1;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = 0;
+ goto out;
+ }
+
+ if (!hdr.PageLength) {
+ rc = 0;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer) {
+ rc = 0;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.pageAddr = phys_disk_num;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = 0;
+ goto out;
+ }
+
+ rc = buffer->NumPhysDiskPaths;
+ out:
+
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+
+ return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
+
+/**
+ * mpt_raid_phys_disk_pg1 - returns phys disk page 1
+ * @ioc: Pointer to a Adapter Structure
+ * @phys_disk_num: io unit unique phys disk num generated by the ioc
+ * @phys_disk: requested payload data returned
+ *
+ * Return:
+ * 0 on success
+ * -EFAULT if read of config page header fails or data pointer not NULL
+ * -ENOMEM if pci_alloc failed
+ **/
+int
+mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+ RaidPhysDiskPage1_t *phys_disk)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidPhysDiskPage1_t buffer = NULL;
+ int rc;
+ int i;
+ __le64 sas_address;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ rc = 0;
+
+ hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
+ hdr.PageNumber = 1;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.physAddr = -1;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ if (!hdr.PageLength) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+ cfg.pageAddr = phys_disk_num;
+
+ if (mpt_config(ioc, &cfg) != 0) {
+ rc = -EFAULT;
+ goto out;
+ }
+
+ phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
+ phys_disk->PhysDiskNum = phys_disk_num;
+ for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
+ phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
+ phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
+ phys_disk->Path[i].OwnerIdentifier =
+ buffer->Path[i].OwnerIdentifier;
+ phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
+ memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
+ sas_address = le64_to_cpu(sas_address);
+ memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
+ memcpy(&sas_address,
+ &buffer->Path[i].OwnerWWID, sizeof(__le64));
+ sas_address = le64_to_cpu(sas_address);
+ memcpy(&phys_disk->Path[i].OwnerWWID,
+ &sas_address, sizeof(__le64));
+ }
+
+ out:
+
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+
+ return rc;
+}
+EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
+
+
+/**
* mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
* @ioc: Pointer to a Adapter Strucutre
*
@@ -5775,30 +6242,28 @@
* SendEventNotification - Send EventNotification (on or off) request to adapter
* @ioc: Pointer to MPT_ADAPTER structure
* @EvSwitch: Event switch flags
+ * @sleepFlag: Specifies whether the process can sleep
*/
static int
-SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch)
+SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
{
- EventNotification_t *evnp;
+ EventNotification_t evn;
+ MPIDefaultReply_t reply_buf;
- evnp = (EventNotification_t *) mpt_get_msg_frame(mpt_base_index, ioc);
- if (evnp == NULL) {
- devtverboseprintk(ioc, printk(MYIOC_s_WARN_FMT "Unable to allocate event request frame!\n",
- ioc->name));
- return 0;
- }
- memset(evnp, 0, sizeof(*evnp));
+ memset(&evn, 0, sizeof(EventNotification_t));
+ memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
- devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventNotification (%d) request %p\n", ioc->name, EvSwitch, evnp));
+ evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
+ evn.Switch = EvSwitch;
+ evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
- evnp->Function = MPI_FUNCTION_EVENT_NOTIFICATION;
- evnp->ChainOffset = 0;
- evnp->MsgFlags = 0;
- evnp->Switch = EvSwitch;
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Sending EventNotification (%d) request %p\n",
+ ioc->name, EvSwitch, &evn));
- mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)evnp);
-
- return 0;
+ return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
+ (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
+ sleepFlag);
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5814,7 +6279,7 @@
if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
- ioc->name,__func__));
+ ioc->name, __func__));
return -1;
}
@@ -5851,12 +6316,19 @@
mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
{
Config_t *pReq;
+ ConfigReply_t *pReply;
ConfigExtendedPageHeader_t *pExtHdr = NULL;
MPT_FRAME_HDR *mf;
- unsigned long flags;
- int ii, rc;
+ int ii;
int flagsLength;
- int in_isr;
+ long timeout;
+ int ret;
+ u8 page_type = 0, extend_page;
+ unsigned long timeleft;
+ unsigned long flags;
+ int in_isr;
+ u8 issue_hard_reset = 0;
+ u8 retry_count = 0;
/* Prevent calling wait_event() (below), if caller happens
* to be in ISR context, because that is fatal!
@@ -5866,15 +6338,43 @@
dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
ioc->name));
return -EPERM;
+ }
+
+ /* don't send a config page during diag reset */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: busy with host reset\n", ioc->name, __func__));
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return -EBUSY;
}
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ /* don't send if no chance of success */
+ if (!ioc->active ||
+ mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: ioc not operational, %d, %xh\n",
+ ioc->name, __func__, ioc->active,
+ mpt_GetIocState(ioc, 0)));
+ return -EFAULT;
+ }
+
+ retry_config:
+ mutex_lock(&ioc->mptbase_cmds.mutex);
+ /* init the internal cmd struct */
+ memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
+ INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
/* Get and Populate a free Frame
*/
if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
- dcprintk(ioc, printk(MYIOC_s_WARN_FMT "mpt_config: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
+ dcprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "mpt_config: no msg frames!\n", ioc->name));
+ ret = -EAGAIN;
+ goto out;
}
+
pReq = (Config_t *)mf;
pReq->Action = pCfg->action;
pReq->Reserved = 0;
@@ -5900,7 +6400,9 @@
pReq->ExtPageType = pExtHdr->ExtPageType;
pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
- /* Page Length must be treated as a reserved field for the extended header. */
+ /* Page Length must be treated as a reserved field for the
+ * extended header.
+ */
pReq->Header.PageLength = 0;
}
@@ -5913,78 +6415,91 @@
else
flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
- if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
+ if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
+ MPI_CONFIG_PAGETYPE_EXTENDED) {
flagsLength |= pExtHdr->ExtPageLength * 4;
-
- dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
- ioc->name, pReq->ExtPageType, pReq->Header.PageNumber, pReq->Action));
- }
- else {
+ page_type = pReq->ExtPageType;
+ extend_page = 1;
+ } else {
flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
-
- dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Config request type %d, page %d and action %d\n",
- ioc->name, pReq->Header.PageType, pReq->Header.PageNumber, pReq->Action));
+ page_type = pReq->Header.PageType;
+ extend_page = 0;
}
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+ dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Sending Config request type 0x%x, page 0x%x and action %d\n",
+ ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
- /* Append pCfg pointer to end of mf
- */
- *((void **) (((u8 *) mf) + (ioc->req_sz - sizeof(void *)))) = (void *) pCfg;
-
- /* Initalize the timer
- */
- init_timer_on_stack(&pCfg->timer);
- pCfg->timer.data = (unsigned long) ioc;
- pCfg->timer.function = mpt_timer_expired;
- pCfg->wait_done = 0;
-
- /* Set the timer; ensure 10 second minimum */
- if (pCfg->timeout < 10)
- pCfg->timer.expires = jiffies + HZ*10;
- else
- pCfg->timer.expires = jiffies + HZ*pCfg->timeout;
-
- /* Add to end of Q, set timer and then issue this command */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- list_add_tail(&pCfg->linkage, &ioc->configQ);
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- add_timer(&pCfg->timer);
+ ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
+ timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
mpt_put_msg_frame(mpt_base_index, ioc, mf);
- wait_event(mpt_waitq, pCfg->wait_done);
+ timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
+ timeout);
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Failed Sending Config request type 0x%x, page 0x%x,"
+ " action %d, status %xh, time left %ld\n\n",
+ ioc->name, page_type, pReq->Header.PageNumber,
+ pReq->Action, ioc->mptbase_cmds.status, timeleft));
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ if (!timeleft)
+ issue_hard_reset = 1;
+ goto out;
+ }
- /* mf has been freed - do not access */
+ if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ ret = -1;
+ goto out;
+ }
+ pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
+ ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ if (ret == MPI_IOCSTATUS_SUCCESS) {
+ if (extend_page) {
+ pCfg->cfghdr.ehdr->ExtPageLength =
+ le16_to_cpu(pReply->ExtPageLength);
+ pCfg->cfghdr.ehdr->ExtPageType =
+ pReply->ExtPageType;
+ }
+ pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
+ pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
+ pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
+ pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
- rc = pCfg->status;
+ }
- return rc;
-}
+ if (retry_count)
+ printk(MYIOC_s_INFO_FMT "Retry completed "
+ "ret=0x%x timeleft=%ld\n",
+ ioc->name, ret, timeleft);
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mpt_timer_expired - Callback for timer process.
- * Used only internal config functionality.
- * @data: Pointer to MPT_SCSI_HOST recast as an unsigned long
- */
-static void
-mpt_timer_expired(unsigned long data)
-{
- MPT_ADAPTER *ioc = (MPT_ADAPTER *) data;
+ dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
+ ret, le32_to_cpu(pReply->IOCLogInfo)));
- dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired! \n", ioc->name));
+out:
- /* Perform a FW reload */
- if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
- printk(MYIOC_s_WARN_FMT "Firmware Reload FAILED!\n", ioc->name);
+ CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
+ mutex_unlock(&ioc->mptbase_cmds.mutex);
+ if (issue_hard_reset) {
+ issue_hard_reset = 0;
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ /* attempt one retry for a timed out command */
+ if (!retry_count) {
+ printk(MYIOC_s_INFO_FMT
+ "Attempting Retry Config request"
+ " type 0x%x, page 0x%x,"
+ " action %d\n", ioc->name, page_type,
+ pCfg->cfghdr.hdr->PageNumber, pCfg->action);
+ retry_count++;
+ goto retry_config;
+ }
+ }
+ return ret;
- /* No more processing.
- * Hard reset clean-up will wake up
- * process and free all resources.
- */
- dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_timer_expired complete!\n", ioc->name));
-
- return;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -5998,41 +6513,34 @@
static int
mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
- CONFIGPARMS *pCfg;
- unsigned long flags;
-
- dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- ": IOC %s_reset routed to MPT base driver!\n",
- ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
- reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
- if (reset_phase == MPT_IOC_SETUP_RESET) {
- ;
- } else if (reset_phase == MPT_IOC_PRE_RESET) {
- /* If the internal config Q is not empty -
- * delete timer. MF resources will be freed when
- * the FIFO's are primed.
- */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- list_for_each_entry(pCfg, &ioc->configQ, linkage)
- del_timer(&pCfg->timer);
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- } else {
- CONFIGPARMS *pNext;
-
- /* Search the configQ for internal commands.
- * Flush the Q, and wake up all suspended threads.
- */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- list_for_each_entry_safe(pCfg, pNext, &ioc->configQ, linkage) {
- list_del(&pCfg->linkage);
-
- pCfg->status = MPT_CONFIG_ERROR;
- pCfg->wait_done = 1;
- wake_up(&mpt_waitq);
+ switch (reset_phase) {
+ case MPT_IOC_SETUP_RESET:
+ ioc->taskmgmt_quiesce_io = 1;
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_POST_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+/* wake up mptbase_cmds */
+ if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->mptbase_cmds.status |=
+ MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->mptbase_cmds.done);
}
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
+/* wake up taskmgmt_cmds */
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->taskmgmt_cmds.status |=
+ MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->taskmgmt_cmds.done);
+ }
+ break;
+ default:
+ break;
}
return 1; /* currently means nothing really */
@@ -6344,6 +6852,59 @@
*size = y;
}
+/**
+ * mpt_set_taskmgmt_in_progress_flag - set flags associated with task managment
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ * Returns 0 for SUCCESS or -1 if FAILED.
+ *
+ * If -1 is return, then it was not possible to set the flags
+ **/
+int
+mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+ unsigned long flags;
+ int retval;
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
+ (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
+ retval = -1;
+ goto out;
+ }
+ retval = 0;
+ ioc->taskmgmt_in_progress = 1;
+ ioc->taskmgmt_quiesce_io = 1;
+ if (ioc->alt_ioc) {
+ ioc->alt_ioc->taskmgmt_in_progress = 1;
+ ioc->alt_ioc->taskmgmt_quiesce_io = 1;
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return retval;
+}
+EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
+
+/**
+ * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task managment
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+void
+mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ ioc->taskmgmt_in_progress = 0;
+ ioc->taskmgmt_quiesce_io = 0;
+ if (ioc->alt_ioc) {
+ ioc->alt_ioc->taskmgmt_in_progress = 0;
+ ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+}
+EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
/**
@@ -6397,7 +6958,9 @@
mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
{
int rc;
+ u8 cb_idx;
unsigned long flags;
+ unsigned long time_count;
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
#ifdef MFCNT
@@ -6410,14 +6973,15 @@
/* Reset the adapter. Prevent more than 1 call to
* mpt_do_ioc_recovery at any instant in time.
*/
- spin_lock_irqsave(&ioc->diagLock, flags);
- if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)){
- spin_unlock_irqrestore(&ioc->diagLock, flags);
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
return 0;
- } else {
- ioc->diagPending = 1;
}
- spin_unlock_irqrestore(&ioc->diagLock, flags);
+ ioc->ioc_reset_in_progress = 1;
+ if (ioc->alt_ioc)
+ ioc->alt_ioc->ioc_reset_in_progress = 1;
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
/* FIXME: If do_ioc_recovery fails, repeat....
*/
@@ -6427,47 +6991,57 @@
* Prevents timeouts occurring during a diagnostic reset...very bad.
* For all other protocol drivers, this is a no-op.
*/
- {
- u8 cb_idx;
- int r = 0;
-
- for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
- if (MptResetHandlers[cb_idx]) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling IOC reset_setup handler #%d\n",
- ioc->name, cb_idx));
- r += mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
- if (ioc->alt_ioc) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling alt-%s setup reset handler #%d\n",
- ioc->name, ioc->alt_ioc->name, cb_idx));
- r += mpt_signal_reset(cb_idx, ioc->alt_ioc, MPT_IOC_SETUP_RESET);
- }
- }
+ for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
+ if (MptResetHandlers[cb_idx]) {
+ mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
+ if (ioc->alt_ioc)
+ mpt_signal_reset(cb_idx, ioc->alt_ioc,
+ MPT_IOC_SETUP_RESET);
}
}
- if ((rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag)) != 0) {
- printk(MYIOC_s_WARN_FMT "Cannot recover rc = %d!\n", ioc->name, rc);
+ time_count = jiffies;
+ rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
+ if (rc != 0) {
+ printk(KERN_WARNING MYNAM
+ ": WARNING - (%d) Cannot recover %s\n", rc, ioc->name);
+ } else {
+ if (ioc->hard_resets < -1)
+ ioc->hard_resets++;
}
- ioc->reload_fw = 0;
- if (ioc->alt_ioc)
- ioc->alt_ioc->reload_fw = 0;
- spin_lock_irqsave(&ioc->diagLock, flags);
- ioc->diagPending = 0;
- if (ioc->alt_ioc)
- ioc->alt_ioc->diagPending = 0;
- spin_unlock_irqrestore(&ioc->diagLock, flags);
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ ioc->ioc_reset_in_progress = 0;
+ ioc->taskmgmt_quiesce_io = 0;
+ ioc->taskmgmt_in_progress = 0;
+ if (ioc->alt_ioc) {
+ ioc->alt_ioc->ioc_reset_in_progress = 0;
+ ioc->alt_ioc->taskmgmt_quiesce_io = 0;
+ ioc->alt_ioc->taskmgmt_in_progress = 0;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler rc = %d!\n", ioc->name, rc));
+ dtmprintk(ioc,
+ printk(MYIOC_s_DEBUG_FMT
+ "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
+ jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
+ "SUCCESS" : "FAILED")));
return rc;
}
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
+#ifdef CONFIG_FUSION_LOGGING
static void
-EventDescriptionStr(u8 event, u32 evData0, char *evStr)
+mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
{
char *ds = NULL;
+ u32 evData0;
+ int ii;
+ u8 event;
+ char *evStr = ioc->evStr;
+
+ event = le32_to_cpu(pEventReply->Event) & 0xFF;
+ evData0 = le32_to_cpu(pEventReply->Data[0]);
switch(event) {
case MPI_EVENT_NONE:
@@ -6501,9 +7075,9 @@
if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
ds = "Loop State(LIP) Change";
else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
- ds = "Loop State(LPE) Change"; /* ??? */
+ ds = "Loop State(LPE) Change";
else
- ds = "Loop State(LPB) Change"; /* ??? */
+ ds = "Loop State(LPB) Change";
break;
case MPI_EVENT_LOGOUT:
ds = "Logout";
@@ -6703,28 +7277,65 @@
}
case MPI_EVENT_IR2:
{
+ u8 id = (u8)(evData0);
+ u8 channel = (u8)(evData0 >> 8);
+ u8 phys_num = (u8)(evData0 >> 24);
u8 ReasonCode = (u8)(evData0 >> 16);
+
switch (ReasonCode) {
case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
- ds = "IR2: LD State Changed";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: LD State Changed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
- ds = "IR2: PD State Changed";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD State Changed "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
- ds = "IR2: Bad Block Table Full";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Bad Block Table Full: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_PD_INSERTED:
- ds = "IR2: PD Inserted";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD Inserted: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_PD_REMOVED:
- ds = "IR2: PD Removed";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: PD Removed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
- ds = "IR2: Foreign CFG Detected";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Foreign CFG Detected: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
- ds = "IR2: Rebuild Medium Error";
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Rebuild Medium Error: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Dual Port Added: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
+ break;
+ case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+ snprintf(evStr, EVENT_DESCR_STR_SZ,
+ "IR2: Dual Port Removed: "
+ "id=%d channel=%d phys_num=%d",
+ id, channel, phys_num);
break;
default:
ds = "IR2";
@@ -6760,13 +7371,18 @@
case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
{
u8 reason = (u8)(evData0);
- u8 port_num = (u8)(evData0 >> 8);
- u16 handle = le16_to_cpu(evData0 >> 16);
- snprintf(evStr, EVENT_DESCR_STR_SZ,
- "SAS Initiator Device Status Change: reason=0x%02x "
- "port=%d handle=0x%04x",
- reason, port_num, handle);
+ switch (reason) {
+ case MPI_EVENT_SAS_INIT_RC_ADDED:
+ ds = "SAS Initiator Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_INIT_RC_REMOVED:
+ ds = "SAS Initiator Status Change: Deleted";
+ break;
+ default:
+ ds = "SAS Initiator Status Change";
+ break;
+ }
break;
}
@@ -6814,6 +7430,24 @@
break;
}
+ case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+ {
+ u8 reason = (u8)(evData0);
+
+ switch (reason) {
+ case MPI_EVENT_SAS_EXP_RC_ADDED:
+ ds = "Expander Status Change: Added";
+ break;
+ case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
+ ds = "Expander Status Change: Deleted";
+ break;
+ default:
+ ds = "Expander Status Change";
+ break;
+ }
+ break;
+ }
+
/*
* MPT base "custom" events may be added here...
*/
@@ -6823,8 +7457,20 @@
}
if (ds)
strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
-}
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "MPT event:(%02Xh) : %s\n",
+ ioc->name, event, evStr));
+
+ devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
+ ": Event data:\n"));
+ for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
+ devtverboseprintk(ioc, printk(" %08x",
+ le32_to_cpu(pEventReply->Data[ii])));
+ devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
+}
+#endif
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
* ProcessEventNotification - Route EventNotificationReply to all event handlers
@@ -6841,37 +7487,24 @@
{
u16 evDataLen;
u32 evData0 = 0;
-// u32 evCtx;
int ii;
u8 cb_idx;
int r = 0;
int handlers = 0;
- char evStr[EVENT_DESCR_STR_SZ];
u8 event;
/*
* Do platform normalization of values
*/
event = le32_to_cpu(pEventReply->Event) & 0xFF;
-// evCtx = le32_to_cpu(pEventReply->EventContext);
evDataLen = le16_to_cpu(pEventReply->EventDataLength);
if (evDataLen) {
evData0 = le32_to_cpu(pEventReply->Data[0]);
}
- EventDescriptionStr(event, evData0, evStr);
- devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event:(%02Xh) : %s\n",
- ioc->name,
- event,
- evStr));
-
#ifdef CONFIG_FUSION_LOGGING
- devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- ": Event data:\n", ioc->name));
- for (ii = 0; ii < evDataLen; ii++)
- devtverboseprintk(ioc, printk(" %08x",
- le32_to_cpu(pEventReply->Data[ii])));
- devtverboseprintk(ioc, printk("\n"));
+ if (evDataLen)
+ mpt_display_event_info(ioc, pEventReply);
#endif
/*
@@ -6926,8 +7559,9 @@
*/
for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
if (MptEvHandlers[cb_idx]) {
- devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Routing Event to event handler #%d\n",
- ioc->name, cb_idx));
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "Routing Event to event handler #%d\n",
+ ioc->name, cb_idx));
r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
handlers++;
}
@@ -7011,8 +7645,6 @@
switch (info) {
case 0x00010000:
desc = "bug! MID not found";
- if (ioc->reload_fw == 0)
- ioc->reload_fw++;
break;
case 0x00020000:
@@ -7613,7 +8245,6 @@
EXPORT_SYMBOL(mpt_put_msg_frame);
EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
EXPORT_SYMBOL(mpt_free_msg_frame);
-EXPORT_SYMBOL(mpt_add_sge);
EXPORT_SYMBOL(mpt_send_handshake_request);
EXPORT_SYMBOL(mpt_verify_adapter);
EXPORT_SYMBOL(mpt_GetIocState);
@@ -7650,7 +8281,7 @@
/* Register ourselves (mptbase) in order to facilitate
* EventNotification handling.
*/
- mpt_base_index = mpt_register(mpt_base_reply, MPTBASE_DRIVER);
+ mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER);
/* Register for hard reset handling callbacks.
*/
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index b3e981d..1c8514d 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -76,8 +76,8 @@
#define COPYRIGHT "Copyright (c) 1999-2008 " MODULEAUTHOR
#endif
-#define MPT_LINUX_VERSION_COMMON "3.04.07"
-#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.07"
+#define MPT_LINUX_VERSION_COMMON "3.04.10"
+#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.04.09"
#define WHAT_MAGIC_STRING "@" "(" "#" ")"
#define show_mptmod_ver(s,ver) \
@@ -104,6 +104,7 @@
#endif
#define MPT_NAME_LENGTH 32
+#define MPT_KOBJ_NAME_LEN 20
#define MPT_PROCFS_MPTBASEDIR "mpt"
/* chg it to "driver/fusion" ? */
@@ -134,6 +135,7 @@
#define MPT_COALESCING_TIMEOUT 0x10
+
/*
* SCSI transfer rate defines.
*/
@@ -161,10 +163,10 @@
/*
* Set the MAX_SGE value based on user input.
*/
-#ifdef CONFIG_FUSION_MAX_SGE
-#if CONFIG_FUSION_MAX_SGE < 16
+#ifdef CONFIG_FUSION_MAX_SGE
+#if CONFIG_FUSION_MAX_SGE < 16
#define MPT_SCSI_SG_DEPTH 16
-#elif CONFIG_FUSION_MAX_SGE > 128
+#elif CONFIG_FUSION_MAX_SGE > 128
#define MPT_SCSI_SG_DEPTH 128
#else
#define MPT_SCSI_SG_DEPTH CONFIG_FUSION_MAX_SGE
@@ -173,6 +175,18 @@
#define MPT_SCSI_SG_DEPTH 40
#endif
+#ifdef CONFIG_FUSION_MAX_FC_SGE
+#if CONFIG_FUSION_MAX_FC_SGE < 16
+#define MPT_SCSI_FC_SG_DEPTH 16
+#elif CONFIG_FUSION_MAX_FC_SGE > 256
+#define MPT_SCSI_FC_SG_DEPTH 256
+#else
+#define MPT_SCSI_FC_SG_DEPTH CONFIG_FUSION_MAX_FC_SGE
+#endif
+#else
+#define MPT_SCSI_FC_SG_DEPTH 40
+#endif
+
/* debug print string length used for events and iocstatus */
# define EVENT_DESCR_STR_SZ 100
@@ -431,38 +445,36 @@
* IOCTL structure and associated defines
*/
-#define MPT_IOCTL_STATUS_DID_IOCRESET 0x01 /* IOC Reset occurred on the current*/
-#define MPT_IOCTL_STATUS_RF_VALID 0x02 /* The Reply Frame is VALID */
-#define MPT_IOCTL_STATUS_TIMER_ACTIVE 0x04 /* The timer is running */
-#define MPT_IOCTL_STATUS_SENSE_VALID 0x08 /* Sense data is valid */
-#define MPT_IOCTL_STATUS_COMMAND_GOOD 0x10 /* Command Status GOOD */
-#define MPT_IOCTL_STATUS_TMTIMER_ACTIVE 0x20 /* The TM timer is running */
-#define MPT_IOCTL_STATUS_TM_FAILED 0x40 /* User TM request failed */
-
#define MPTCTL_RESET_OK 0x01 /* Issue Bus Reset */
-typedef struct _MPT_IOCTL {
- struct _MPT_ADAPTER *ioc;
- u8 ReplyFrame[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
- u8 sense[MPT_SENSE_BUFFER_ALLOC];
- int wait_done; /* wake-up value for this ioc */
- u8 rsvd;
- u8 status; /* current command status */
- u8 reset; /* 1 if bus reset allowed */
- u8 id; /* target for reset */
- struct mutex ioctl_mutex;
-} MPT_IOCTL;
+#define MPT_MGMT_STATUS_RF_VALID 0x01 /* The Reply Frame is VALID */
+#define MPT_MGMT_STATUS_COMMAND_GOOD 0x02 /* Command Status GOOD */
+#define MPT_MGMT_STATUS_PENDING 0x04 /* command is pending */
+#define MPT_MGMT_STATUS_DID_IOCRESET 0x08 /* IOC Reset occurred
+ on the current*/
+#define MPT_MGMT_STATUS_SENSE_VALID 0x10 /* valid sense info */
+#define MPT_MGMT_STATUS_TIMER_ACTIVE 0x20 /* obsolete */
+#define MPT_MGMT_STATUS_FREE_MF 0x40 /* free the mf from
+ complete routine */
-#define MPT_SAS_MGMT_STATUS_RF_VALID 0x02 /* The Reply Frame is VALID */
-#define MPT_SAS_MGMT_STATUS_COMMAND_GOOD 0x10 /* Command Status GOOD */
-#define MPT_SAS_MGMT_STATUS_TM_FAILED 0x40 /* User TM request failed */
+#define INITIALIZE_MGMT_STATUS(status) \
+ status = MPT_MGMT_STATUS_PENDING;
+#define CLEAR_MGMT_STATUS(status) \
+ status = 0;
+#define CLEAR_MGMT_PENDING_STATUS(status) \
+ status &= ~MPT_MGMT_STATUS_PENDING;
+#define SET_MGMT_MSG_CONTEXT(msg_context, value) \
+ msg_context = value;
-typedef struct _MPT_SAS_MGMT {
+typedef struct _MPT_MGMT {
struct mutex mutex;
struct completion done;
u8 reply[MPT_DEFAULT_FRAME_SIZE]; /* reply frame data */
+ u8 sense[MPT_SENSE_BUFFER_ALLOC];
u8 status; /* current command status */
-}MPT_SAS_MGMT;
+ int completion_code;
+ u32 msg_context;
+} MPT_MGMT;
/*
* Event Structure and define
@@ -564,6 +576,10 @@
u8 flags;
};
+typedef void (*MPT_ADD_SGE)(void *pAddr, u32 flagslength, dma_addr_t dma_addr);
+typedef void (*MPT_ADD_CHAIN)(void *pAddr, u8 next, u16 length,
+ dma_addr_t dma_addr);
+
/*
* Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS
*/
@@ -573,6 +589,10 @@
int pci_irq; /* This irq */
char name[MPT_NAME_LENGTH]; /* "iocN" */
char prod_name[MPT_NAME_LENGTH]; /* "LSIFC9x9" */
+#ifdef CONFIG_FUSION_LOGGING
+ /* used in mpt_display_event_info */
+ char evStr[EVENT_DESCR_STR_SZ];
+#endif
char board_name[16];
char board_assembly[16];
char board_tracer[16];
@@ -600,6 +620,10 @@
int reply_depth; /* Num Allocated reply frames */
int reply_sz; /* Reply frame size */
int num_chain; /* Number of chain buffers */
+ MPT_ADD_SGE add_sge; /* Pointer to add_sge
+ function */
+ MPT_ADD_CHAIN add_chain; /* Pointer to add_chain
+ function */
/* Pool of buffers for chaining. ReqToChain
* and ChainToChain track index of chain buffers.
* ChainBuffer (DMA) virt/phys addresses.
@@ -640,11 +664,8 @@
RaidCfgData raid_data; /* Raid config. data */
SasCfgData sas_data; /* Sas config. data */
FcCfgData fc_data; /* Fc config. data */
- MPT_IOCTL *ioctl; /* ioctl data pointer */
struct proc_dir_entry *ioc_dentry;
struct _MPT_ADAPTER *alt_ioc; /* ptr to 929 bound adapter port */
- spinlock_t diagLock; /* diagnostic reset lock */
- int diagPending;
u32 biosVersion; /* BIOS version from IO Unit Page 2 */
int eventTypes; /* Event logging parameters */
int eventContext; /* Next event context */
@@ -652,7 +673,6 @@
struct _mpt_ioctl_events *events; /* pointer to event log */
u8 *cached_fw; /* Pointer to FW */
dma_addr_t cached_fw_dma;
- struct list_head configQ; /* linked list of config. requests */
int hs_reply_idx;
#ifndef MFCNT
u32 pad0;
@@ -665,9 +685,6 @@
IOCFactsReply_t facts;
PortFactsReply_t pfacts[2];
FCPortPage0_t fc_port_page0[2];
- struct timer_list persist_timer; /* persist table timer */
- int persist_wait_done; /* persist completion flag */
- u8 persist_reply_frame[MPT_DEFAULT_FRAME_SIZE]; /* persist reply */
LANPage0_t lan_cnfg_page0;
LANPage1_t lan_cnfg_page1;
@@ -682,23 +699,44 @@
int aen_event_read_flag; /* flag to indicate event log was read*/
u8 FirstWhoInit;
u8 upload_fw; /* If set, do a fw upload */
- u8 reload_fw; /* Force a FW Reload on next reset */
u8 NBShiftFactor; /* NB Shift Factor based on Block Size (Facts) */
u8 pad1[4];
u8 DoneCtx;
u8 TaskCtx;
u8 InternalCtx;
- spinlock_t initializing_hba_lock;
- int initializing_hba_lock_flag;
struct list_head list;
struct net_device *netdev;
struct list_head sas_topology;
struct mutex sas_topology_mutex;
+
+ struct workqueue_struct *fw_event_q;
+ struct list_head fw_event_list;
+ spinlock_t fw_event_lock;
+ u8 fw_events_off; /* if '1', then ignore events */
+ char fw_event_q_name[MPT_KOBJ_NAME_LEN];
+
struct mutex sas_discovery_mutex;
u8 sas_discovery_runtime;
u8 sas_discovery_ignore_events;
+
+ /* port_info object for the host */
+ struct mptsas_portinfo *hba_port_info;
+ u64 hba_port_sas_addr;
+ u16 hba_port_num_phy;
+ struct list_head sas_device_info_list;
+ struct mutex sas_device_info_mutex;
+ u8 old_sas_discovery_protocal;
+ u8 sas_discovery_quiesce_io;
int sas_index; /* index refrencing */
- MPT_SAS_MGMT sas_mgmt;
+ MPT_MGMT sas_mgmt;
+ MPT_MGMT mptbase_cmds; /* for sending config pages */
+ MPT_MGMT internal_cmds;
+ MPT_MGMT taskmgmt_cmds;
+ MPT_MGMT ioctl_cmds;
+ spinlock_t taskmgmt_lock; /* diagnostic reset lock */
+ int taskmgmt_in_progress;
+ u8 taskmgmt_quiesce_io;
+ u8 ioc_reset_in_progress;
struct work_struct sas_persist_task;
struct work_struct fc_setup_reset_work;
@@ -707,15 +745,27 @@
u8 fc_link_speed[2];
spinlock_t fc_rescan_work_lock;
struct work_struct fc_rescan_work;
- char fc_rescan_work_q_name[20];
+ char fc_rescan_work_q_name[MPT_KOBJ_NAME_LEN];
struct workqueue_struct *fc_rescan_work_q;
+
+ /* driver forced bus resets count */
+ unsigned long hard_resets;
+ /* fw/external bus resets count */
+ unsigned long soft_resets;
+ /* cmd timeouts */
+ unsigned long timeouts;
+
struct scsi_cmnd **ScsiLookup;
spinlock_t scsi_lookup_lock;
-
- char reset_work_q_name[20];
+ u64 dma_mask;
+ u32 broadcast_aen_busy;
+ char reset_work_q_name[MPT_KOBJ_NAME_LEN];
struct workqueue_struct *reset_work_q;
struct delayed_work fault_reset_work;
- spinlock_t fault_reset_work_lock;
+
+ u8 sg_addr_size;
+ u8 in_rescan;
+ u8 SGE_size;
} MPT_ADAPTER;
@@ -753,13 +803,14 @@
dma_addr_t Address;
} MptSge_t;
-#define mpt_addr_size() \
- ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SGE_FLAGS_64_BIT_ADDRESSING : \
- MPI_SGE_FLAGS_32_BIT_ADDRESSING)
-#define mpt_msg_flags() \
- ((sizeof(dma_addr_t) == sizeof(u64)) ? MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
- MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32)
+#define mpt_msg_flags(ioc) \
+ (ioc->sg_addr_size == sizeof(u64)) ? \
+ MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64 : \
+ MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32
+
+#define MPT_SGE_FLAGS_64_BIT_ADDRESSING \
+ (MPI_SGE_FLAGS_64_BIT_ADDRESSING << MPI_SGE_FLAGS_SHIFT)
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
@@ -835,22 +886,14 @@
/* Pool of memory for holding SCpnts before doing
* OS callbacks. freeQ is the free pool.
*/
- u8 tmPending;
- u8 resetPending;
u8 negoNvram; /* DV disabled, nego NVRAM */
u8 pad1;
- u8 tmState;
u8 rsvd[2];
MPT_FRAME_HDR *cmdPtr; /* Ptr to nonOS request */
struct scsi_cmnd *abortSCpnt;
MPT_LOCAL_REPLY localReply; /* internal cmd reply struct */
- unsigned long hard_resets; /* driver forced bus resets count */
- unsigned long soft_resets; /* fw/external bus resets count */
- unsigned long timeouts; /* cmd timeouts */
ushort sel_timeout[MPT_MAX_FC_DEVICES];
char *info_kbuf;
- wait_queue_head_t scandv_waitq;
- int scandv_wait_done;
long last_queue_full;
u16 tm_iocstatus;
u16 spi_pending;
@@ -870,21 +913,16 @@
* Generic structure passed to the base mpt_config function.
*/
typedef struct _x_config_parms {
- struct list_head linkage; /* linked list */
- struct timer_list timer; /* timer function for this request */
union {
ConfigExtendedPageHeader_t *ehdr;
ConfigPageHeader_t *hdr;
} cfghdr;
dma_addr_t physAddr;
- int wait_done; /* wait for this request */
u32 pageAddr; /* properly formatted */
+ u16 status;
u8 action;
u8 dir;
u8 timeout; /* seconds */
- u8 pad1;
- u16 status;
- u16 pad2;
} CONFIGPARMS;
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -909,7 +947,6 @@
extern void mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
extern void mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
extern void mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf);
-extern void mpt_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr);
extern int mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag);
extern int mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp);
@@ -922,6 +959,12 @@
extern int mpt_findImVolumes(MPT_ADAPTER *ioc);
extern int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
extern int mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num, pRaidPhysDiskPage0_t phys_disk);
+extern int mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
+ pRaidPhysDiskPage1_t phys_disk);
+extern int mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc,
+ u8 phys_disk_num);
+extern int mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
+extern void mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc);
extern void mpt_halt_firmware(MPT_ADAPTER *ioc);
@@ -959,7 +1002,6 @@
#define MPT_SGE_FLAGS_END_OF_BUFFER (0x40000000)
#define MPT_SGE_FLAGS_LOCAL_ADDRESS (0x08000000)
#define MPT_SGE_FLAGS_DIRECTION (0x04000000)
-#define MPT_SGE_FLAGS_ADDRESSING (mpt_addr_size() << MPI_SGE_FLAGS_SHIFT)
#define MPT_SGE_FLAGS_END_OF_LIST (0x01000000)
#define MPT_SGE_FLAGS_TRANSACTION_ELEMENT (0x00000000)
@@ -972,14 +1014,12 @@
MPT_SGE_FLAGS_END_OF_BUFFER | \
MPT_SGE_FLAGS_END_OF_LIST | \
MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
- MPT_SGE_FLAGS_ADDRESSING | \
MPT_TRANSFER_IOC_TO_HOST)
#define MPT_SGE_FLAGS_SSIMPLE_WRITE \
(MPT_SGE_FLAGS_LAST_ELEMENT | \
MPT_SGE_FLAGS_END_OF_BUFFER | \
MPT_SGE_FLAGS_END_OF_LIST | \
MPT_SGE_FLAGS_SIMPLE_ELEMENT | \
- MPT_SGE_FLAGS_ADDRESSING | \
MPT_TRANSFER_HOST_TO_IOC)
/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index c638171..9b2e219 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -84,6 +84,7 @@
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
static u8 mptctl_id = MPT_MAX_PROTOCOL_DRIVERS;
+static u8 mptctl_taskmgmt_id = MPT_MAX_PROTOCOL_DRIVERS;
static DECLARE_WAIT_QUEUE_HEAD ( mptctl_wait );
@@ -127,10 +128,7 @@
struct buflist **blp, dma_addr_t *sglbuf_dma, MPT_ADAPTER *ioc);
static void kfree_sgl(MptSge_t *sgl, dma_addr_t sgl_dma,
struct buflist *buflist, MPT_ADAPTER *ioc);
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl);
-static int mptctl_bus_reset(MPT_IOCTL *ioctl);
-static int mptctl_set_tm_flags(MPT_SCSI_HOST *hd);
-static void mptctl_free_tm_flags(MPT_ADAPTER *ioc);
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function);
/*
* Reset Handler cleanup function
@@ -183,10 +181,10 @@
int rc = 0;
if (nonblock) {
- if (!mutex_trylock(&ioc->ioctl->ioctl_mutex))
+ if (!mutex_trylock(&ioc->ioctl_cmds.mutex))
rc = -EAGAIN;
} else {
- if (mutex_lock_interruptible(&ioc->ioctl->ioctl_mutex))
+ if (mutex_lock_interruptible(&ioc->ioctl_cmds.mutex))
rc = -ERESTARTSYS;
}
return rc;
@@ -202,99 +200,78 @@
static int
mptctl_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
{
- char *sense_data;
- int sz, req_index;
- u16 iocStatus;
- u8 cmd;
+ char *sense_data;
+ int req_index;
+ int sz;
- if (req)
- cmd = req->u.hdr.Function;
- else
- return 1;
- dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tcompleting mpi function (0x%02X), req=%p, "
- "reply=%p\n", ioc->name, req->u.hdr.Function, req, reply));
+ if (!req)
+ return 0;
- if (ioc->ioctl) {
+ dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function "
+ "(0x%02X), req=%p, reply=%p\n", ioc->name, req->u.hdr.Function,
+ req, reply));
- if (reply==NULL) {
+ /*
+ * Handling continuation of the same reply. Processing the first
+ * reply, and eating the other replys that come later.
+ */
+ if (ioc->ioctl_cmds.msg_context != req->u.hdr.MsgContext)
+ goto out_continuation;
- dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_reply() NULL Reply "
- "Function=%x!\n", ioc->name, cmd));
+ ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
- ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
- ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
+ if (!reply)
+ goto out;
- /* We are done, issue wake up
- */
- ioc->ioctl->wait_done = 1;
- wake_up (&mptctl_wait);
- return 1;
+ ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ sz = min(ioc->reply_sz, 4*reply->u.reply.MsgLength);
+ memcpy(ioc->ioctl_cmds.reply, reply, sz);
- }
+ if (reply->u.reply.IOCStatus || reply->u.reply.IOCLogInfo)
+ dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "iocstatus (0x%04X), loginfo (0x%08X)\n", ioc->name,
+ le16_to_cpu(reply->u.reply.IOCStatus),
+ le32_to_cpu(reply->u.reply.IOCLogInfo)));
- /* Copy the reply frame (which much exist
- * for non-SCSI I/O) to the IOC structure.
- */
- memcpy(ioc->ioctl->ReplyFrame, reply,
- min(ioc->reply_sz, 4*reply->u.reply.MsgLength));
- ioc->ioctl->status |= MPT_IOCTL_STATUS_RF_VALID;
+ if ((req->u.hdr.Function == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+ (req->u.hdr.Function ==
+ MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
- /* Set the command status to GOOD if IOC Status is GOOD
- * OR if SCSI I/O cmd and data underrun or recovered error.
- */
- iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
- if (iocStatus == MPI_IOCSTATUS_SUCCESS)
- ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
+ if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
+ dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "scsi_status (0x%02x), scsi_state (0x%02x), "
+ "tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
+ reply->u.sreply.SCSIStatus,
+ reply->u.sreply.SCSIState,
+ le16_to_cpu(reply->u.sreply.TaskTag),
+ le32_to_cpu(reply->u.sreply.TransferCount)));
- if (iocStatus || reply->u.reply.IOCLogInfo)
- dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\tiocstatus (0x%04X), "
- "loginfo (0x%08X)\n", ioc->name,
- iocStatus,
- le32_to_cpu(reply->u.reply.IOCLogInfo)));
-
- if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
- (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
-
- if (reply->u.sreply.SCSIStatus || reply->u.sreply.SCSIState)
- dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "\tscsi_status (0x%02x), scsi_state (0x%02x), "
- "tag = (0x%04x), transfer_count (0x%08x)\n", ioc->name,
- reply->u.sreply.SCSIStatus,
- reply->u.sreply.SCSIState,
- le16_to_cpu(reply->u.sreply.TaskTag),
- le32_to_cpu(reply->u.sreply.TransferCount)));
-
- ioc->ioctl->reset &= ~MPTCTL_RESET_OK;
-
- if ((iocStatus == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN) ||
- (iocStatus == MPI_IOCSTATUS_SCSI_RECOVERED_ERROR)) {
- ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
- }
- }
-
- /* Copy the sense data - if present
- */
- if ((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) &&
- (reply->u.sreply.SCSIState &
- MPI_SCSI_STATE_AUTOSENSE_VALID)){
+ if (reply->u.sreply.SCSIState &
+ MPI_SCSI_STATE_AUTOSENSE_VALID) {
sz = req->u.scsireq.SenseBufferLength;
req_index =
le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
- sense_data =
- ((u8 *)ioc->sense_buf_pool +
+ sense_data = ((u8 *)ioc->sense_buf_pool +
(req_index * MPT_SENSE_BUFFER_ALLOC));
- memcpy(ioc->ioctl->sense, sense_data, sz);
- ioc->ioctl->status |= MPT_IOCTL_STATUS_SENSE_VALID;
+ memcpy(ioc->ioctl_cmds.sense, sense_data, sz);
+ ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_SENSE_VALID;
}
-
- if (cmd == MPI_FUNCTION_SCSI_TASK_MGMT)
- mptctl_free_tm_flags(ioc);
-
- /* We are done, issue wake up
- */
- ioc->ioctl->wait_done = 1;
- wake_up (&mptctl_wait);
}
+
+ out:
+ /* We are done, issue wake up
+ */
+ if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ if (req->u.hdr.Function == MPI_FUNCTION_SCSI_TASK_MGMT)
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ ioc->ioctl_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->ioctl_cmds.done);
+ }
+
+ out_continuation:
+ if (reply && (reply->u.reply.MsgFlags &
+ MPI_MSGFLAGS_CONTINUATION_REPLY))
+ return 0;
return 1;
}
@@ -304,30 +281,66 @@
* Expecting an interrupt, however timed out.
*
*/
-static void mptctl_timeout_expired (MPT_IOCTL *ioctl)
+static void
+mptctl_timeout_expired(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
{
- int rc = 1;
+ unsigned long flags;
- if (ioctl == NULL)
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n",
+ ioc->name, __func__));
+
+ if (mpt_fwfault_debug)
+ mpt_halt_firmware(ioc);
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+ mpt_free_msg_frame(ioc, mf);
return;
- dctlprintk(ioctl->ioc,
- printk(MYIOC_s_DEBUG_FMT ": Timeout Expired! Host %d\n",
- ioctl->ioc->name, ioctl->ioc->id));
-
- ioctl->wait_done = 0;
- if (ioctl->reset & MPTCTL_RESET_OK)
- rc = mptctl_bus_reset(ioctl);
-
- if (rc) {
- /* Issue a reset for this device.
- * The IOC is not responding.
- */
- dctlprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
- ioctl->ioc->name));
- mpt_HardResetHandler(ioctl->ioc, CAN_SLEEP);
}
- return;
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ if (!mptctl_bus_reset(ioc, mf->u.hdr.Function))
+ return;
+
+ /* Issue a reset for this device.
+ * The IOC is not responding.
+ */
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
+ ioc->name));
+ CLEAR_MGMT_PENDING_STATUS(ioc->ioctl_cmds.status)
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+}
+
+static int
+mptctl_taskmgmt_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+{
+ if (!mf)
+ return 0;
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt completed (mf=%p, mr=%p)\n",
+ ioc->name, mf, mr));
+
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+
+ if (!mr)
+ goto out;
+
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->taskmgmt_cmds.reply, mr,
+ min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+ out:
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->taskmgmt_cmds.done);
+ return 1;
+ }
+ return 0;
}
/* mptctl_bus_reset
@@ -335,133 +348,150 @@
* Bus reset code.
*
*/
-static int mptctl_bus_reset(MPT_IOCTL *ioctl)
+static int mptctl_bus_reset(MPT_ADAPTER *ioc, u8 function)
{
MPT_FRAME_HDR *mf;
SCSITaskMgmt_t *pScsiTm;
- MPT_SCSI_HOST *hd;
+ SCSITaskMgmtReply_t *pScsiTmReply;
int ii;
- int retval=0;
+ int retval;
+ unsigned long timeout;
+ unsigned long time_count;
+ u16 iocstatus;
-
- ioctl->reset &= ~MPTCTL_RESET_OK;
-
- if (ioctl->ioc->sh == NULL)
+ /* bus reset is only good for SCSI IO, RAID PASSTHRU */
+ if (!(function == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) ||
+ (function == MPI_FUNCTION_SCSI_IO_REQUEST)) {
+ dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "TaskMgmt, not SCSI_IO!!\n", ioc->name));
return -EPERM;
+ }
- hd = shost_priv(ioctl->ioc->sh);
- if (hd == NULL)
+ mutex_lock(&ioc->taskmgmt_cmds.mutex);
+ if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
return -EPERM;
+ }
- /* Single threading ....
- */
- if (mptctl_set_tm_flags(hd) != 0)
- return -EPERM;
+ retval = 0;
/* Send request
*/
- if ((mf = mpt_get_msg_frame(mptctl_id, ioctl->ioc)) == NULL) {
- dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt, no msg frames!!\n",
- ioctl->ioc->name));
-
- mptctl_free_tm_flags(ioctl->ioc);
- return -ENOMEM;
+ mf = mpt_get_msg_frame(mptctl_taskmgmt_id, ioc);
+ if (mf == NULL) {
+ dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "TaskMgmt, no msg frames!!\n", ioc->name));
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ retval = -ENOMEM;
+ goto mptctl_bus_reset_done;
}
- dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
- ioctl->ioc->name, mf));
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+ ioc->name, mf));
pScsiTm = (SCSITaskMgmt_t *) mf;
- pScsiTm->TargetID = ioctl->id;
- pScsiTm->Bus = hd->port; /* 0 */
- pScsiTm->ChainOffset = 0;
+ memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
- pScsiTm->Reserved = 0;
pScsiTm->TaskType = MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS;
- pScsiTm->Reserved1 = 0;
pScsiTm->MsgFlags = MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION;
-
+ pScsiTm->TargetID = 0;
+ pScsiTm->Bus = 0;
+ pScsiTm->ChainOffset = 0;
+ pScsiTm->Reserved = 0;
+ pScsiTm->Reserved1 = 0;
+ pScsiTm->TaskMsgContext = 0;
for (ii= 0; ii < 8; ii++)
pScsiTm->LUN[ii] = 0;
-
for (ii=0; ii < 7; ii++)
pScsiTm->Reserved2[ii] = 0;
- pScsiTm->TaskMsgContext = 0;
- dtmprintk(ioctl->ioc, printk(MYIOC_s_DEBUG_FMT
- "mptctl_bus_reset: issued.\n", ioctl->ioc->name));
+ switch (ioc->bus_type) {
+ case FC:
+ timeout = 40;
+ break;
+ case SAS:
+ timeout = 30;
+ break;
+ case SPI:
+ default:
+ timeout = 2;
+ break;
+ }
- DBG_DUMP_TM_REQUEST_FRAME(ioctl->ioc, (u32 *)mf);
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt type=%d timeout=%ld\n",
+ ioc->name, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, timeout));
- ioctl->wait_done=0;
-
- if ((ioctl->ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
- (ioctl->ioc->facts.MsgVersion >= MPI_VERSION_01_05))
- mpt_put_msg_frame_hi_pri(mptctl_id, ioctl->ioc, mf);
+ INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ time_count = jiffies;
+ if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
+ (ioc->facts.MsgVersion >= MPI_VERSION_01_05))
+ mpt_put_msg_frame_hi_pri(mptctl_taskmgmt_id, ioc, mf);
else {
- retval = mpt_send_handshake_request(mptctl_id, ioctl->ioc,
- sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
+ retval = mpt_send_handshake_request(mptctl_taskmgmt_id, ioc,
+ sizeof(SCSITaskMgmt_t), (u32 *)pScsiTm, CAN_SLEEP);
if (retval != 0) {
- dfailprintk(ioctl->ioc, printk(MYIOC_s_ERR_FMT "_send_handshake FAILED!"
- " (hd %p, ioc %p, mf %p) \n", hd->ioc->name, hd,
- hd->ioc, mf));
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt send_handshake FAILED!"
+ " (ioc %p, mf %p, rc=%d) \n", ioc->name,
+ ioc, mf, retval));
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
goto mptctl_bus_reset_done;
}
}
/* Now wait for the command to complete */
- ii = wait_event_timeout(mptctl_wait,
- ioctl->wait_done == 1,
- HZ*5 /* 5 second timeout */);
+ ii = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done, timeout*HZ);
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt failed\n", ioc->name));
+ mpt_free_msg_frame(ioc, mf);
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ retval = 0;
+ else
+ retval = -1; /* return failure */
+ goto mptctl_bus_reset_done;
+ }
- if(ii <=0 && (ioctl->wait_done != 1 )) {
- mpt_free_msg_frame(hd->ioc, mf);
- ioctl->wait_done = 0;
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt failed\n", ioc->name));
+ retval = -1; /* return failure */
+ goto mptctl_bus_reset_done;
+ }
+
+ pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt fw_channel = %d, fw_id = %d, task_type=0x%02X, "
+ "iocstatus=0x%04X\n\tloginfo=0x%08X, response_code=0x%02X, "
+ "term_cmnds=%d\n", ioc->name, pScsiTmReply->Bus,
+ pScsiTmReply->TargetID, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+ le16_to_cpu(pScsiTmReply->IOCStatus),
+ le32_to_cpu(pScsiTmReply->IOCLogInfo),
+ pScsiTmReply->ResponseCode,
+ le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+ iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+
+ if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+ iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED ||
+ iocstatus == MPI_IOCSTATUS_SUCCESS)
+ retval = 0;
+ else {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt failed\n", ioc->name));
retval = -1; /* return failure */
}
-mptctl_bus_reset_done:
- mptctl_free_tm_flags(ioctl->ioc);
+ mptctl_bus_reset_done:
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+ CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
return retval;
}
-static int
-mptctl_set_tm_flags(MPT_SCSI_HOST *hd) {
- unsigned long flags;
-
- spin_lock_irqsave(&hd->ioc->FreeQlock, flags);
-
- if (hd->tmState == TM_STATE_NONE) {
- hd->tmState = TM_STATE_IN_PROGRESS;
- hd->tmPending = 1;
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- } else {
- spin_unlock_irqrestore(&hd->ioc->FreeQlock, flags);
- return -EBUSY;
- }
-
- return 0;
-}
-
-static void
-mptctl_free_tm_flags(MPT_ADAPTER *ioc)
-{
- MPT_SCSI_HOST * hd;
- unsigned long flags;
-
- hd = shost_priv(ioc->sh);
- if (hd == NULL)
- return;
-
- spin_lock_irqsave(&ioc->FreeQlock, flags);
-
- hd->tmState = TM_STATE_NONE;
- hd->tmPending = 0;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- return;
-}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/* mptctl_ioc_reset
@@ -473,22 +503,23 @@
static int
mptctl_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
- MPT_IOCTL *ioctl = ioc->ioctl;
- dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC %s_reset routed to IOCTL driver!\n", ioc->name,
- reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
- reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
- if(ioctl == NULL)
- return 1;
-
switch(reset_phase) {
case MPT_IOC_SETUP_RESET:
- ioctl->status |= MPT_IOCTL_STATUS_DID_IOCRESET;
- break;
- case MPT_IOC_POST_RESET:
- ioctl->status &= ~MPT_IOCTL_STATUS_DID_IOCRESET;
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
break;
case MPT_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_POST_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+ if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->ioctl_cmds.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->ioctl_cmds.done);
+ }
+ break;
default:
break;
}
@@ -642,7 +673,7 @@
else
ret = -EINVAL;
- mutex_unlock(&iocp->ioctl->ioctl_mutex);
+ mutex_unlock(&iocp->ioctl_cmds.mutex);
return ret;
}
@@ -758,6 +789,7 @@
int sge_offset = 0;
u16 iocstat;
pFWDownloadReply_t ReplyMsg = NULL;
+ unsigned long timeleft;
if (mpt_verify_adapter(ioc, &iocp) < 0) {
printk(KERN_DEBUG MYNAM "ioctl_fwdl - ioc%d not found!\n",
@@ -841,8 +873,9 @@
* 96 8
* 64 4
*/
- maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) - sizeof(FWDownloadTCSGE_t))
- / (sizeof(dma_addr_t) + sizeof(u32));
+ maxfrags = (iocp->req_sz - sizeof(MPIHeader_t) -
+ sizeof(FWDownloadTCSGE_t))
+ / iocp->SGE_size;
if (numfrags > maxfrags) {
ret = -EMLINK;
goto fwdl_out;
@@ -870,7 +903,7 @@
if (nib == 0 || nib == 3) {
;
} else if (sgIn->Address) {
- mpt_add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
+ iocp->add_sge(sgOut, sgIn->FlagsLength, sgIn->Address);
n++;
if (copy_from_user(bl->kptr, ufwbuf+fw_bytes_copied, bl->len)) {
printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - "
@@ -882,7 +915,7 @@
}
sgIn++;
bl++;
- sgOut += (sizeof(dma_addr_t) + sizeof(u32));
+ sgOut += iocp->SGE_size;
}
DBG_DUMP_FW_DOWNLOAD(iocp, (u32 *)mf, numfrags);
@@ -891,16 +924,30 @@
* Finally, perform firmware download.
*/
ReplyMsg = NULL;
+ SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, dlmsg->MsgContext);
+ INITIALIZE_MGMT_STATUS(iocp->ioctl_cmds.status)
mpt_put_msg_frame(mptctl_id, iocp, mf);
/* Now wait for the command to complete */
- ret = wait_event_timeout(mptctl_wait,
- iocp->ioctl->wait_done == 1,
- HZ*60);
+retry_wait:
+ timeleft = wait_for_completion_timeout(&iocp->ioctl_cmds.done, HZ*60);
+ if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+ if (iocp->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+ mpt_free_msg_frame(iocp, mf);
+ goto fwdl_out;
+ }
+ if (!timeleft)
+ mptctl_timeout_expired(iocp, mf);
+ else
+ goto retry_wait;
+ goto fwdl_out;
+ }
- if(ret <=0 && (iocp->ioctl->wait_done != 1 )) {
- /* Now we need to reset the board */
- mptctl_timeout_expired(iocp->ioctl);
+ if (!(iocp->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
+ mpt_free_msg_frame(iocp, mf);
ret = -ENODATA;
goto fwdl_out;
}
@@ -908,7 +955,7 @@
if (sgl)
kfree_sgl(sgl, sgl_dma, buflist, iocp);
- ReplyMsg = (pFWDownloadReply_t)iocp->ioctl->ReplyFrame;
+ ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
if (iocstat == MPI_IOCSTATUS_SUCCESS) {
printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
@@ -932,6 +979,9 @@
return 0;
fwdl_out:
+
+ CLEAR_MGMT_STATUS(iocp->ioctl_cmds.status);
+ SET_MGMT_MSG_CONTEXT(iocp->ioctl_cmds.msg_context, 0);
kfree_sgl(sgl, sgl_dma, buflist, iocp);
return ret;
}
@@ -1003,7 +1053,7 @@
*
*/
sgl = sglbuf;
- sg_spill = ((ioc->req_sz - sge_offset)/(sizeof(dma_addr_t) + sizeof(u32))) - 1;
+ sg_spill = ((ioc->req_sz - sge_offset)/ioc->SGE_size) - 1;
while (bytes_allocd < bytes) {
this_alloc = min(alloc_sz, bytes-bytes_allocd);
buflist[buflist_ent].len = this_alloc;
@@ -1024,8 +1074,9 @@
dma_addr_t dma_addr;
bytes_allocd += this_alloc;
- sgl->FlagsLength = (0x10000000|MPT_SGE_FLAGS_ADDRESSING|sgdir|this_alloc);
- dma_addr = pci_map_single(ioc->pcidev, buflist[buflist_ent].kptr, this_alloc, dir);
+ sgl->FlagsLength = (0x10000000|sgdir|this_alloc);
+ dma_addr = pci_map_single(ioc->pcidev,
+ buflist[buflist_ent].kptr, this_alloc, dir);
sgl->Address = dma_addr;
fragcnt++;
@@ -1771,7 +1822,10 @@
int msgContext;
u16 req_idx;
ulong timeout;
+ unsigned long timeleft;
struct scsi_device *sdev;
+ unsigned long flags;
+ u8 function;
/* bufIn and bufOut are used for user to kernel space transfers
*/
@@ -1784,24 +1838,23 @@
__FILE__, __LINE__, iocnum);
return -ENODEV;
}
- if (!ioc->ioctl) {
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
- "No memory available during driver init.\n",
- __FILE__, __LINE__);
- return -ENOMEM;
- } else if (ioc->ioctl->status & MPT_IOCTL_STATUS_DID_IOCRESET) {
- printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
- "Busy with IOC Reset \n", __FILE__, __LINE__);
+ "Busy with diagnostic reset\n", __FILE__, __LINE__);
return -EBUSY;
}
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
/* Verify that the final request frame will not be too large.
*/
sz = karg.dataSgeOffset * 4;
if (karg.dataInSize > 0)
- sz += sizeof(dma_addr_t) + sizeof(u32);
+ sz += ioc->SGE_size;
if (karg.dataOutSize > 0)
- sz += sizeof(dma_addr_t) + sizeof(u32);
+ sz += ioc->SGE_size;
if (sz > ioc->req_sz) {
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1827,10 +1880,12 @@
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
"Unable to read MF from mpt_ioctl_command struct @ %p\n",
ioc->name, __FILE__, __LINE__, mfPtr);
+ function = -1;
rc = -EFAULT;
goto done_free_mem;
}
hdr->MsgContext = cpu_to_le32(msgContext);
+ function = hdr->Function;
/* Verify that this request is allowed.
@@ -1838,7 +1893,7 @@
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n",
ioc->name, hdr->Function, mf));
- switch (hdr->Function) {
+ switch (function) {
case MPI_FUNCTION_IOC_FACTS:
case MPI_FUNCTION_PORT_FACTS:
karg.dataOutSize = karg.dataInSize = 0;
@@ -1893,7 +1948,7 @@
}
pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
- pScsiReq->MsgFlags |= mpt_msg_flags();
+ pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
/* verify that app has not requested
@@ -1935,8 +1990,6 @@
pScsiReq->Control = cpu_to_le32(scsidir | qtag);
pScsiReq->DataLength = cpu_to_le32(dataSize);
- ioc->ioctl->reset = MPTCTL_RESET_OK;
- ioc->ioctl->id = pScsiReq->TargetID;
} else {
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
@@ -1979,7 +2032,7 @@
int dataSize;
pScsiReq->MsgFlags &= ~MPI_SCSIIO_MSGFLGS_SENSE_WIDTH;
- pScsiReq->MsgFlags |= mpt_msg_flags();
+ pScsiReq->MsgFlags |= mpt_msg_flags(ioc);
/* verify that app has not requested
@@ -2014,8 +2067,6 @@
pScsiReq->Control = cpu_to_le32(scsidir | qtag);
pScsiReq->DataLength = cpu_to_le32(dataSize);
- ioc->ioctl->reset = MPTCTL_RESET_OK;
- ioc->ioctl->id = pScsiReq->TargetID;
} else {
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
"SCSI driver is not loaded. \n",
@@ -2026,20 +2077,17 @@
break;
case MPI_FUNCTION_SCSI_TASK_MGMT:
- {
- MPT_SCSI_HOST *hd = NULL;
- if ((ioc->sh == NULL) || ((hd = shost_priv(ioc->sh)) == NULL)) {
- printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
- "SCSI driver not loaded or SCSI host not found. \n",
- ioc->name, __FILE__, __LINE__);
- rc = -EFAULT;
- goto done_free_mem;
- } else if (mptctl_set_tm_flags(hd) != 0) {
- rc = -EPERM;
- goto done_free_mem;
- }
- }
+ {
+ SCSITaskMgmt_t *pScsiTm;
+ pScsiTm = (SCSITaskMgmt_t *)mf;
+ dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "\tTaskType=0x%x MsgFlags=0x%x "
+ "TaskMsgContext=0x%x id=%d channel=%d\n",
+ ioc->name, pScsiTm->TaskType, le32_to_cpu
+ (pScsiTm->TaskMsgContext), pScsiTm->MsgFlags,
+ pScsiTm->TargetID, pScsiTm->Bus));
break;
+ }
case MPI_FUNCTION_IOC_INIT:
{
@@ -2123,8 +2171,7 @@
if (karg.dataInSize > 0) {
flagsLength = ( MPI_SGE_FLAGS_SIMPLE_ELEMENT |
MPI_SGE_FLAGS_END_OF_BUFFER |
- MPI_SGE_FLAGS_DIRECTION |
- mpt_addr_size() )
+ MPI_SGE_FLAGS_DIRECTION)
<< MPI_SGE_FLAGS_SHIFT;
} else {
flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
@@ -2141,8 +2188,8 @@
/* Set up this SGE.
* Copy to MF and to sglbuf
*/
- mpt_add_sge(psge, flagsLength, dma_addr_out);
- psge += (sizeof(u32) + sizeof(dma_addr_t));
+ ioc->add_sge(psge, flagsLength, dma_addr_out);
+ psge += ioc->SGE_size;
/* Copy user data to kernel space.
*/
@@ -2175,18 +2222,25 @@
/* Set up this SGE
* Copy to MF and to sglbuf
*/
- mpt_add_sge(psge, flagsLength, dma_addr_in);
+ ioc->add_sge(psge, flagsLength, dma_addr_in);
}
}
} else {
/* Add a NULL SGE
*/
- mpt_add_sge(psge, flagsLength, (dma_addr_t) -1);
+ ioc->add_sge(psge, flagsLength, (dma_addr_t) -1);
}
- ioc->ioctl->wait_done = 0;
+ SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, hdr->MsgContext);
+ INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
+ mutex_lock(&ioc->taskmgmt_cmds.mutex);
+ if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+ goto done_free_mem;
+ }
+
DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
@@ -2197,10 +2251,11 @@
sizeof(SCSITaskMgmt_t), (u32*)mf, CAN_SLEEP);
if (rc != 0) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "_send_handshake FAILED! (ioc %p, mf %p)\n",
+ "send_handshake FAILED! (ioc %p, mf %p)\n",
ioc->name, ioc, mf));
- mptctl_free_tm_flags(ioc);
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
rc = -ENODATA;
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
goto done_free_mem;
}
}
@@ -2210,36 +2265,47 @@
/* Now wait for the command to complete */
timeout = (karg.timeout > 0) ? karg.timeout : MPT_IOCTL_DEFAULT_TIMEOUT;
- timeout = wait_event_timeout(mptctl_wait,
- ioc->ioctl->wait_done == 1,
- HZ*timeout);
-
- if(timeout <=0 && (ioc->ioctl->wait_done != 1 )) {
- /* Now we need to reset the board */
-
- if (hdr->Function == MPI_FUNCTION_SCSI_TASK_MGMT)
- mptctl_free_tm_flags(ioc);
-
- mptctl_timeout_expired(ioc->ioctl);
- rc = -ENODATA;
+retry_wait:
+ timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+ HZ*timeout);
+ if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ rc = -ETIME;
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n",
+ ioc->name, __func__));
+ if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+ if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+ goto done_free_mem;
+ }
+ if (!timeleft) {
+ if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+ mptctl_timeout_expired(ioc, mf);
+ mf = NULL;
+ } else
+ goto retry_wait;
goto done_free_mem;
}
+ if (function == MPI_FUNCTION_SCSI_TASK_MGMT)
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+
mf = NULL;
/* If a valid reply frame, copy to the user.
* Offset 2: reply length in U32's
*/
- if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID) {
+ if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID) {
if (karg.maxReplyBytes < ioc->reply_sz) {
- sz = min(karg.maxReplyBytes, 4*ioc->ioctl->ReplyFrame[2]);
+ sz = min(karg.maxReplyBytes,
+ 4*ioc->ioctl_cmds.reply[2]);
} else {
- sz = min(ioc->reply_sz, 4*ioc->ioctl->ReplyFrame[2]);
+ sz = min(ioc->reply_sz, 4*ioc->ioctl_cmds.reply[2]);
}
-
if (sz > 0) {
if (copy_to_user(karg.replyFrameBufPtr,
- &ioc->ioctl->ReplyFrame, sz)){
+ ioc->ioctl_cmds.reply, sz)){
printk(MYIOC_s_ERR_FMT
"%s@%d::mptctl_do_mpt_command - "
"Unable to write out reply frame %p\n",
@@ -2252,10 +2318,11 @@
/* If valid sense data, copy to user.
*/
- if (ioc->ioctl->status & MPT_IOCTL_STATUS_SENSE_VALID) {
+ if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_SENSE_VALID) {
sz = min(karg.maxSenseBytes, MPT_SENSE_BUFFER_SIZE);
if (sz > 0) {
- if (copy_to_user(karg.senseDataPtr, ioc->ioctl->sense, sz)) {
+ if (copy_to_user(karg.senseDataPtr,
+ ioc->ioctl_cmds.sense, sz)) {
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
"Unable to write sense data to user %p\n",
ioc->name, __FILE__, __LINE__,
@@ -2269,7 +2336,7 @@
/* If the overall status is _GOOD and data in, copy data
* to user.
*/
- if ((ioc->ioctl->status & MPT_IOCTL_STATUS_COMMAND_GOOD) &&
+ if ((ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD) &&
(karg.dataInSize > 0) && (bufIn.kptr)) {
if (copy_to_user(karg.dataInBufPtr,
@@ -2284,9 +2351,8 @@
done_free_mem:
- ioc->ioctl->status &= ~(MPT_IOCTL_STATUS_COMMAND_GOOD |
- MPT_IOCTL_STATUS_SENSE_VALID |
- MPT_IOCTL_STATUS_RF_VALID );
+ CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+ SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
/* Free the allocated memory.
*/
@@ -2336,6 +2402,8 @@
ToolboxIstwiReadWriteRequest_t *IstwiRWRequest;
MPT_FRAME_HDR *mf = NULL;
MPIHeader_t *mpi_hdr;
+ unsigned long timeleft;
+ int retval;
/* Reset long to int. Should affect IA64 and SPARC only
*/
@@ -2466,9 +2534,9 @@
MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
if (hd && (cim_rev == 1)) {
- karg.hard_resets = hd->hard_resets;
- karg.soft_resets = hd->soft_resets;
- karg.timeouts = hd->timeouts;
+ karg.hard_resets = ioc->hard_resets;
+ karg.soft_resets = ioc->soft_resets;
+ karg.timeouts = ioc->timeouts;
}
}
@@ -2476,8 +2544,8 @@
* Gather ISTWI(Industry Standard Two Wire Interface) Data
*/
if ((mf = mpt_get_msg_frame(mptctl_id, ioc)) == NULL) {
- dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
- ioc->name,__func__));
+ dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "%s, no msg frames!!\n", ioc->name, __func__));
goto out;
}
@@ -2498,22 +2566,29 @@
pbuf = pci_alloc_consistent(ioc->pcidev, 4, &buf_dma);
if (!pbuf)
goto out;
- mpt_add_sge((char *)&IstwiRWRequest->SGL,
+ ioc->add_sge((char *)&IstwiRWRequest->SGL,
(MPT_SGE_FLAGS_SSIMPLE_READ|4), buf_dma);
- ioc->ioctl->wait_done = 0;
+ retval = 0;
+ SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context,
+ IstwiRWRequest->MsgContext);
+ INITIALIZE_MGMT_STATUS(ioc->ioctl_cmds.status)
mpt_put_msg_frame(mptctl_id, ioc, mf);
- rc = wait_event_timeout(mptctl_wait,
- ioc->ioctl->wait_done == 1,
- HZ*MPT_IOCTL_DEFAULT_TIMEOUT /* 10 sec */);
-
- if(rc <=0 && (ioc->ioctl->wait_done != 1 )) {
- /*
- * Now we need to reset the board
- */
- mpt_free_msg_frame(ioc, mf);
- mptctl_timeout_expired(ioc->ioctl);
+retry_wait:
+ timeleft = wait_for_completion_timeout(&ioc->ioctl_cmds.done,
+ HZ*MPT_IOCTL_DEFAULT_TIMEOUT);
+ if (!(ioc->ioctl_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ retval = -ETIME;
+ printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__);
+ if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+ mpt_free_msg_frame(ioc, mf);
+ goto out;
+ }
+ if (!timeleft)
+ mptctl_timeout_expired(ioc, mf);
+ else
+ goto retry_wait;
goto out;
}
@@ -2526,10 +2601,13 @@
* bays have drives in them
* pbuf[3] = Checksum (0x100 = (byte0 + byte2 + byte3)
*/
- if (ioc->ioctl->status & MPT_IOCTL_STATUS_RF_VALID)
+ if (ioc->ioctl_cmds.status & MPT_MGMT_STATUS_RF_VALID)
karg.rsvd = *(u32 *)pbuf;
out:
+ CLEAR_MGMT_STATUS(ioc->ioctl_cmds.status)
+ SET_MGMT_MSG_CONTEXT(ioc->ioctl_cmds.msg_context, 0);
+
if (pbuf)
pci_free_consistent(ioc->pcidev, 4, pbuf, buf_dma);
@@ -2753,7 +2831,7 @@
ret = mptctl_do_fw_download(kfw.iocnum, kfw.bufp, kfw.fwlen);
- mutex_unlock(&iocp->ioctl->ioctl_mutex);
+ mutex_unlock(&iocp->ioctl_cmds.mutex);
return ret;
}
@@ -2807,7 +2885,7 @@
*/
ret = mptctl_do_mpt_command (karg, &uarg->MF);
- mutex_unlock(&iocp->ioctl->ioctl_mutex);
+ mutex_unlock(&iocp->ioctl_cmds.mutex);
return ret;
}
@@ -2859,21 +2937,10 @@
static int
mptctl_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
- MPT_IOCTL *mem;
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
- /*
- * Allocate and inite a MPT_IOCTL structure
- */
- mem = kzalloc(sizeof(MPT_IOCTL), GFP_KERNEL);
- if (!mem) {
- mptctl_remove(pdev);
- return -ENOMEM;
- }
-
- ioc->ioctl = mem;
- ioc->ioctl->ioc = ioc;
- mutex_init(&ioc->ioctl->ioctl_mutex);
+ mutex_init(&ioc->ioctl_cmds.mutex);
+ init_completion(&ioc->ioctl_cmds.done);
return 0;
}
@@ -2887,9 +2954,6 @@
static void
mptctl_remove(struct pci_dev *pdev)
{
- MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
-
- kfree ( ioc->ioctl );
}
static struct mpt_pci_driver mptctl_driver = {
@@ -2929,6 +2993,7 @@
goto out_fail;
}
+ mptctl_taskmgmt_id = mpt_register(mptctl_taskmgmt_reply, MPTCTL_DRIVER);
mpt_reset_register(mptctl_id, mptctl_ioc_reset);
mpt_event_register(mptctl_id, mptctl_event_process);
@@ -2953,6 +3018,7 @@
/* De-register callback handler from base module */
mpt_deregister(mptctl_id);
+ mpt_reset_deregister(mptctl_taskmgmt_id);
mpt_device_driver_deregister(MPTCTL_DRIVER);
diff --git a/drivers/message/fusion/mptdebug.h b/drivers/message/fusion/mptdebug.h
index 510b9f4..28e4788 100644
--- a/drivers/message/fusion/mptdebug.h
+++ b/drivers/message/fusion/mptdebug.h
@@ -58,6 +58,7 @@
#define MPT_DEBUG_FC 0x00080000
#define MPT_DEBUG_SAS 0x00100000
#define MPT_DEBUG_SAS_WIDE 0x00200000
+#define MPT_DEBUG_36GB_MEM 0x00400000
/*
* CONFIG_FUSION_LOGGING - enabled in Kconfig
@@ -135,6 +136,8 @@
#define dsaswideprintk(IOC, CMD) \
MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_SAS_WIDE)
+#define d36memprintk(IOC, CMD) \
+ MPT_CHECK_LOGGING(IOC, CMD, MPT_DEBUG_36GB_MEM)
/*
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index c3c24fd..e61df13 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1251,17 +1251,15 @@
* A slightly different algorithm is required for
* 64bit SGEs.
*/
- scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
- if (sizeof(dma_addr_t) == sizeof(u64)) {
+ scale = ioc->req_sz/ioc->SGE_size;
+ if (ioc->sg_addr_size == sizeof(u64)) {
numSGE = (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 60) / ioc->SGE_size;
} else {
numSGE = 1 + (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 64) / ioc->SGE_size;
}
if (numSGE < sh->sg_tablesize) {
@@ -1292,9 +1290,6 @@
/* Clear the TM flags
*/
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- hd->resetPending = 0;
hd->abortSCpnt = NULL;
/* Clear the pointer used to store
@@ -1312,8 +1307,6 @@
hd->timer.data = (unsigned long) hd;
hd->timer.function = mptscsih_timer_expired;
- init_waitqueue_head(&hd->scandv_waitq);
- hd->scandv_wait_done = 0;
hd->last_queue_full = 0;
sh->transportt = mptfc_transport_template;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 79f5433..20e0b44 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -93,8 +93,37 @@
static u8 mptsasTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
static u8 mptsasInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
static u8 mptsasMgmtCtx = MPT_MAX_PROTOCOL_DRIVERS;
+static u8 mptsasDeviceResetCtx = MPT_MAX_PROTOCOL_DRIVERS;
-static void mptsas_hotplug_work(struct work_struct *work);
+static void mptsas_firmware_event_work(struct work_struct *work);
+static void mptsas_send_sas_event(struct fw_event_work *fw_event);
+static void mptsas_send_raid_event(struct fw_event_work *fw_event);
+static void mptsas_send_ir2_event(struct fw_event_work *fw_event);
+static void mptsas_parse_device_info(struct sas_identify *identify,
+ struct mptsas_devinfo *device_info);
+static inline void mptsas_set_rphy(MPT_ADAPTER *ioc,
+ struct mptsas_phyinfo *phy_info, struct sas_rphy *rphy);
+static struct mptsas_phyinfo *mptsas_find_phyinfo_by_sas_address
+ (MPT_ADAPTER *ioc, u64 sas_address);
+static int mptsas_sas_device_pg0(MPT_ADAPTER *ioc,
+ struct mptsas_devinfo *device_info, u32 form, u32 form_specific);
+static int mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc,
+ struct mptsas_enclosure *enclosure, u32 form, u32 form_specific);
+static int mptsas_add_end_device(MPT_ADAPTER *ioc,
+ struct mptsas_phyinfo *phy_info);
+static void mptsas_del_end_device(MPT_ADAPTER *ioc,
+ struct mptsas_phyinfo *phy_info);
+static void mptsas_send_link_status_event(struct fw_event_work *fw_event);
+static struct mptsas_portinfo *mptsas_find_portinfo_by_sas_address
+ (MPT_ADAPTER *ioc, u64 sas_address);
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+ struct mptsas_portinfo *port_info, u8 force);
+static void mptsas_send_expander_event(struct fw_event_work *fw_event);
+static void mptsas_not_responding_devices(MPT_ADAPTER *ioc);
+static void mptsas_scan_sas_topology(MPT_ADAPTER *ioc);
+static void mptsas_broadcast_primative_work(struct fw_event_work *fw_event);
+static void mptsas_handle_queue_full_event(struct fw_event_work *fw_event);
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id);
static void mptsas_print_phy_data(MPT_ADAPTER *ioc,
MPI_SAS_IO_UNIT0_PHY_DATA *phy_data)
@@ -218,6 +247,115 @@
le16_to_cpu(pg1->AttachedDevHandle)));
}
+/* inhibit sas firmware event handling */
+static void
+mptsas_fw_event_off(MPT_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ ioc->fw_events_off = 1;
+ ioc->sas_discovery_quiesce_io = 0;
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+
+}
+
+/* enable sas firmware event handling */
+static void
+mptsas_fw_event_on(MPT_ADAPTER *ioc)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ ioc->fw_events_off = 0;
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* queue a sas firmware event */
+static void
+mptsas_add_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+ unsigned long delay)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ list_add_tail(&fw_event->list, &ioc->fw_event_list);
+ INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)\n",
+ ioc->name, __func__, fw_event));
+ queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+ delay);
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* requeue a sas firmware event */
+static void
+mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+ unsigned long delay)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task "
+ "(fw_event=0x%p)\n", ioc->name, __func__, fw_event));
+ fw_event->retries++;
+ queue_delayed_work(ioc->fw_event_q, &fw_event->work,
+ msecs_to_jiffies(delay));
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* free memory assoicated to a sas firmware event */
+static void
+mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ioc->fw_event_lock, flags);
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n",
+ ioc->name, __func__, fw_event));
+ list_del(&fw_event->list);
+ kfree(fw_event);
+ spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
+}
+
+/* walk the firmware event queue, and either stop or wait for
+ * outstanding events to complete */
+static void
+mptsas_cleanup_fw_event_q(MPT_ADAPTER *ioc)
+{
+ struct fw_event_work *fw_event, *next;
+ struct mptsas_target_reset_event *target_reset_list, *n;
+ u8 flush_q;
+ MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
+
+ /* flush the target_reset_list */
+ if (!list_empty(&hd->target_reset_list)) {
+ list_for_each_entry_safe(target_reset_list, n,
+ &hd->target_reset_list, list) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: removing target reset for id=%d\n",
+ ioc->name, __func__,
+ target_reset_list->sas_event_data.TargetID));
+ list_del(&target_reset_list->list);
+ kfree(target_reset_list);
+ }
+ }
+
+ if (list_empty(&ioc->fw_event_list) ||
+ !ioc->fw_event_q || in_interrupt())
+ return;
+
+ flush_q = 0;
+ list_for_each_entry_safe(fw_event, next, &ioc->fw_event_list, list) {
+ if (cancel_delayed_work(&fw_event->work))
+ mptsas_free_fw_event(ioc, fw_event);
+ else
+ flush_q = 1;
+ }
+ if (flush_q)
+ flush_workqueue(ioc->fw_event_q);
+}
+
+
static inline MPT_ADAPTER *phy_to_ioc(struct sas_phy *phy)
{
struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
@@ -230,20 +368,6 @@
return ((MPT_SCSI_HOST *)shost->hostdata)->ioc;
}
-static struct mptsas_portinfo *
-mptsas_get_hba_portinfo(MPT_ADAPTER *ioc)
-{
- struct list_head *head = &ioc->sas_topology;
- struct mptsas_portinfo *pi = NULL;
-
- /* always the first entry on sas_topology list */
-
- if (!list_empty(head))
- pi = list_entry(head->next, struct mptsas_portinfo, list);
-
- return pi;
-}
-
/*
* mptsas_find_portinfo_by_handle
*
@@ -265,6 +389,38 @@
return rc;
}
+/**
+ * mptsas_find_portinfo_by_sas_address -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @handle:
+ *
+ * This function should be called with the sas_topology_mutex already held
+ *
+ **/
+static struct mptsas_portinfo *
+mptsas_find_portinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
+{
+ struct mptsas_portinfo *port_info, *rc = NULL;
+ int i;
+
+ if (sas_address >= ioc->hba_port_sas_addr &&
+ sas_address < (ioc->hba_port_sas_addr +
+ ioc->hba_port_num_phy))
+ return ioc->hba_port_info;
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_for_each_entry(port_info, &ioc->sas_topology, list)
+ for (i = 0; i < port_info->num_phys; i++)
+ if (port_info->phy_info[i].identify.sas_address ==
+ sas_address) {
+ rc = port_info;
+ goto out;
+ }
+ out:
+ mutex_unlock(&ioc->sas_topology_mutex);
+ return rc;
+}
+
/*
* Returns true if there is a scsi end device
*/
@@ -308,6 +464,7 @@
if(phy_info->port_details != port_details)
continue;
memset(&phy_info->attached, 0, sizeof(struct mptsas_devinfo));
+ mptsas_set_rphy(ioc, phy_info, NULL);
phy_info->port_details = NULL;
}
kfree(port_details);
@@ -379,6 +536,285 @@
phy_info->port_details->starget = starget;
}
+/**
+ * mptsas_add_device_component -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @channel: fw mapped id's
+ * @id:
+ * @sas_address:
+ * @device_info:
+ *
+ **/
+static void
+mptsas_add_device_component(MPT_ADAPTER *ioc, u8 channel, u8 id,
+ u64 sas_address, u32 device_info, u16 slot, u64 enclosure_logical_id)
+{
+ struct mptsas_device_info *sas_info, *next;
+ struct scsi_device *sdev;
+ struct scsi_target *starget;
+ struct sas_rphy *rphy;
+
+ /*
+ * Delete all matching devices out of the list
+ */
+ mutex_lock(&ioc->sas_device_info_mutex);
+ list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+ list) {
+ if (!sas_info->is_logical_volume &&
+ (sas_info->sas_address == sas_address ||
+ (sas_info->fw.channel == channel &&
+ sas_info->fw.id == id))) {
+ list_del(&sas_info->list);
+ kfree(sas_info);
+ }
+ }
+
+ sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+ if (!sas_info)
+ goto out;
+
+ /*
+ * Set Firmware mapping
+ */
+ sas_info->fw.id = id;
+ sas_info->fw.channel = channel;
+
+ sas_info->sas_address = sas_address;
+ sas_info->device_info = device_info;
+ sas_info->slot = slot;
+ sas_info->enclosure_logical_id = enclosure_logical_id;
+ INIT_LIST_HEAD(&sas_info->list);
+ list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+
+ /*
+ * Set OS mapping
+ */
+ shost_for_each_device(sdev, ioc->sh) {
+ starget = scsi_target(sdev);
+ rphy = dev_to_rphy(starget->dev.parent);
+ if (rphy->identify.sas_address == sas_address) {
+ sas_info->os.id = starget->id;
+ sas_info->os.channel = starget->channel;
+ }
+ }
+
+ out:
+ mutex_unlock(&ioc->sas_device_info_mutex);
+ return;
+}
+
+/**
+ * mptsas_add_device_component_by_fw -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @channel: fw mapped id's
+ * @id:
+ *
+ **/
+static void
+mptsas_add_device_component_by_fw(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ struct mptsas_devinfo sas_device;
+ struct mptsas_enclosure enclosure_info;
+ int rc;
+
+ rc = mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (channel << 8) + id);
+ if (rc)
+ return;
+
+ memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+ mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+ (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+ MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+ sas_device.handle_enclosure);
+
+ mptsas_add_device_component(ioc, sas_device.channel,
+ sas_device.id, sas_device.sas_address, sas_device.device_info,
+ sas_device.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ * mptsas_add_device_component_starget_ir - Handle Integrated RAID, adding each individual device to list
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @channel: fw mapped id's
+ * @id:
+ *
+ **/
+static void
+mptsas_add_device_component_starget_ir(MPT_ADAPTER *ioc,
+ struct scsi_target *starget)
+{
+ CONFIGPARMS cfg;
+ ConfigPageHeader_t hdr;
+ dma_addr_t dma_handle;
+ pRaidVolumePage0_t buffer = NULL;
+ int i;
+ RaidPhysDiskPage0_t phys_disk;
+ struct mptsas_device_info *sas_info, *next;
+
+ memset(&cfg, 0 , sizeof(CONFIGPARMS));
+ memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
+ hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
+ /* assumption that all volumes on channel = 0 */
+ cfg.pageAddr = starget->id;
+ cfg.cfghdr.hdr = &hdr;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
+ cfg.timeout = 10;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!hdr.PageLength)
+ goto out;
+
+ buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
+ &dma_handle);
+
+ if (!buffer)
+ goto out;
+
+ cfg.physAddr = dma_handle;
+ cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
+
+ if (mpt_config(ioc, &cfg) != 0)
+ goto out;
+
+ if (!buffer->NumPhysDisks)
+ goto out;
+
+ /*
+ * Adding entry for hidden components
+ */
+ for (i = 0; i < buffer->NumPhysDisks; i++) {
+
+ if (mpt_raid_phys_disk_pg0(ioc,
+ buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
+ continue;
+
+ mptsas_add_device_component_by_fw(ioc, phys_disk.PhysDiskBus,
+ phys_disk.PhysDiskID);
+
+ mutex_lock(&ioc->sas_device_info_mutex);
+ list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+ list) {
+ if (!sas_info->is_logical_volume &&
+ (sas_info->fw.channel == phys_disk.PhysDiskBus &&
+ sas_info->fw.id == phys_disk.PhysDiskID)) {
+ sas_info->is_hidden_raid_component = 1;
+ sas_info->volume_id = starget->id;
+ }
+ }
+ mutex_unlock(&ioc->sas_device_info_mutex);
+
+ }
+
+ /*
+ * Delete all matching devices out of the list
+ */
+ mutex_lock(&ioc->sas_device_info_mutex);
+ list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+ list) {
+ if (sas_info->is_logical_volume && sas_info->fw.id ==
+ starget->id) {
+ list_del(&sas_info->list);
+ kfree(sas_info);
+ }
+ }
+
+ sas_info = kzalloc(sizeof(struct mptsas_device_info), GFP_KERNEL);
+ if (sas_info) {
+ sas_info->fw.id = starget->id;
+ sas_info->os.id = starget->id;
+ sas_info->os.channel = starget->channel;
+ sas_info->is_logical_volume = 1;
+ INIT_LIST_HEAD(&sas_info->list);
+ list_add_tail(&sas_info->list, &ioc->sas_device_info_list);
+ }
+ mutex_unlock(&ioc->sas_device_info_mutex);
+
+ out:
+ if (buffer)
+ pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
+ dma_handle);
+}
+
+/**
+ * mptsas_add_device_component_starget -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @starget:
+ *
+ **/
+static void
+mptsas_add_device_component_starget(MPT_ADAPTER *ioc,
+ struct scsi_target *starget)
+{
+ VirtTarget *vtarget;
+ struct sas_rphy *rphy;
+ struct mptsas_phyinfo *phy_info = NULL;
+ struct mptsas_enclosure enclosure_info;
+
+ rphy = dev_to_rphy(starget->dev.parent);
+ vtarget = starget->hostdata;
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ rphy->identify.sas_address);
+ if (!phy_info)
+ return;
+
+ memset(&enclosure_info, 0, sizeof(struct mptsas_enclosure));
+ mptsas_sas_enclosure_pg0(ioc, &enclosure_info,
+ (MPI_SAS_ENCLOS_PGAD_FORM_HANDLE <<
+ MPI_SAS_ENCLOS_PGAD_FORM_SHIFT),
+ phy_info->attached.handle_enclosure);
+
+ mptsas_add_device_component(ioc, phy_info->attached.channel,
+ phy_info->attached.id, phy_info->attached.sas_address,
+ phy_info->attached.device_info,
+ phy_info->attached.slot, enclosure_info.enclosure_logical_id);
+}
+
+/**
+ * mptsas_del_device_component_by_os - Once a device has been removed, we mark the entry in the list as being cached
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @channel: os mapped id's
+ * @id:
+ *
+ **/
+static void
+mptsas_del_device_component_by_os(MPT_ADAPTER *ioc, u8 channel, u8 id)
+{
+ struct mptsas_device_info *sas_info, *next;
+
+ /*
+ * Set is_cached flag
+ */
+ list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+ list) {
+ if (sas_info->os.channel == channel && sas_info->os.id == id)
+ sas_info->is_cached = 1;
+ }
+}
+
+/**
+ * mptsas_del_device_components - Cleaning the list
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_del_device_components(MPT_ADAPTER *ioc)
+{
+ struct mptsas_device_info *sas_info, *next;
+
+ mutex_lock(&ioc->sas_device_info_mutex);
+ list_for_each_entry_safe(sas_info, next, &ioc->sas_device_info_list,
+ list) {
+ list_del(&sas_info->list);
+ kfree(sas_info);
+ }
+ mutex_unlock(&ioc->sas_device_info_mutex);
+}
+
/*
* mptsas_setup_wide_ports
@@ -434,8 +870,8 @@
* Forming a port
*/
if (!port_details) {
- port_details = kzalloc(sizeof(*port_details),
- GFP_KERNEL);
+ port_details = kzalloc(sizeof(struct
+ mptsas_portinfo_details), GFP_KERNEL);
if (!port_details)
goto out;
port_details->num_phys = 1;
@@ -523,15 +959,62 @@
VirtTarget *vtarget = NULL;
shost_for_each_device(sdev, ioc->sh) {
- if ((vdevice = sdev->hostdata) == NULL)
+ vdevice = sdev->hostdata;
+ if ((vdevice == NULL) ||
+ (vdevice->vtarget == NULL))
+ continue;
+ if ((vdevice->vtarget->tflags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT ||
+ vdevice->vtarget->raidVolume))
continue;
if (vdevice->vtarget->id == id &&
- vdevice->vtarget->channel == channel)
+ vdevice->vtarget->channel == channel)
vtarget = vdevice->vtarget;
}
return vtarget;
}
+static void
+mptsas_queue_device_delete(MPT_ADAPTER *ioc,
+ MpiEventDataSasDeviceStatusChange_t *sas_event_data)
+{
+ struct fw_event_work *fw_event;
+ int sz;
+
+ sz = offsetof(struct fw_event_work, event_data) +
+ sizeof(MpiEventDataSasDeviceStatusChange_t);
+ fw_event = kzalloc(sz, GFP_ATOMIC);
+ if (!fw_event) {
+ printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ memcpy(fw_event->event_data, sas_event_data,
+ sizeof(MpiEventDataSasDeviceStatusChange_t));
+ fw_event->event = MPI_EVENT_SAS_DEVICE_STATUS_CHANGE;
+ fw_event->ioc = ioc;
+ mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+static void
+mptsas_queue_rescan(MPT_ADAPTER *ioc)
+{
+ struct fw_event_work *fw_event;
+ int sz;
+
+ sz = offsetof(struct fw_event_work, event_data);
+ fw_event = kzalloc(sz, GFP_ATOMIC);
+ if (!fw_event) {
+ printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
+ ioc->name, __func__, __LINE__);
+ return;
+ }
+ fw_event->event = -1;
+ fw_event->ioc = ioc;
+ mptsas_add_fw_event(ioc, fw_event, msecs_to_jiffies(1));
+}
+
+
/**
* mptsas_target_reset
*
@@ -550,13 +1033,21 @@
{
MPT_FRAME_HDR *mf;
SCSITaskMgmt_t *pScsiTm;
-
- if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
- dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames @%d!!\n",
- ioc->name,__func__, __LINE__));
+ if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0)
return 0;
+
+
+ mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+ if (mf == NULL) {
+ dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "%s, no msg frames @%d!!\n", ioc->name,
+ __func__, __LINE__));
+ goto out_fail;
}
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
+ ioc->name, mf));
+
/* Format the Request
*/
pScsiTm = (SCSITaskMgmt_t *) mf;
@@ -569,9 +1060,18 @@
DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)mf);
- mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt type=%d (sas device delete) fw_channel = %d fw_id = %d)\n",
+ ioc->name, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, channel, id));
+
+ mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
return 1;
+
+ out_fail:
+
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ return 0;
}
/**
@@ -602,11 +1102,12 @@
vtarget->deleted = 1; /* block IO */
- target_reset_list = kzalloc(sizeof(*target_reset_list),
+ target_reset_list = kzalloc(sizeof(struct mptsas_target_reset_event),
GFP_ATOMIC);
if (!target_reset_list) {
- dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
- ioc->name,__func__, __LINE__));
+ dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
+ "%s, failed to allocate mem @%d..!!\n",
+ ioc->name, __func__, __LINE__));
return;
}
@@ -614,84 +1115,101 @@
sizeof(*sas_event_data));
list_add_tail(&target_reset_list->list, &hd->target_reset_list);
- if (hd->resetPending)
- return;
+ target_reset_list->time_count = jiffies;
if (mptsas_target_reset(ioc, channel, id)) {
target_reset_list->target_reset_issued = 1;
- hd->resetPending = 1;
}
}
/**
- * mptsas_dev_reset_complete
+ * mptsas_taskmgmt_complete - complete SAS task management function
+ * @ioc: Pointer to MPT_ADAPTER structure
*
- * Completion for TARGET_RESET after NOT_RESPONDING_EVENT,
- * enable work queue to finish off removing device from upper layers.
- * then send next TARGET_RESET in the queue.
- *
- * @ioc
- *
+ * Completion for TARGET_RESET after NOT_RESPONDING_EVENT, enable work
+ * queue to finish off removing device from upper layers. then send next
+ * TARGET_RESET in the queue.
**/
-static void
-mptsas_dev_reset_complete(MPT_ADAPTER *ioc)
+static int
+mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
{
MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
struct list_head *head = &hd->target_reset_list;
- struct mptsas_target_reset_event *target_reset_list;
- struct mptsas_hotplug_event *ev;
- EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
u8 id, channel;
- __le64 sas_address;
+ struct mptsas_target_reset_event *target_reset_list;
+ SCSITaskMgmtReply_t *pScsiTmReply;
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: "
+ "(mf = %p, mr = %p)\n", ioc->name, mf, mr));
+
+ pScsiTmReply = (SCSITaskMgmtReply_t *)mr;
+ if (pScsiTmReply) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "\tTaskMgmt completed: fw_channel = %d, fw_id = %d,\n"
+ "\ttask_type = 0x%02X, iocstatus = 0x%04X "
+ "loginfo = 0x%08X,\n\tresponse_code = 0x%02X, "
+ "term_cmnds = %d\n", ioc->name,
+ pScsiTmReply->Bus, pScsiTmReply->TargetID,
+ pScsiTmReply->TaskType,
+ le16_to_cpu(pScsiTmReply->IOCStatus),
+ le32_to_cpu(pScsiTmReply->IOCLogInfo),
+ pScsiTmReply->ResponseCode,
+ le32_to_cpu(pScsiTmReply->TerminationCount)));
+
+ if (pScsiTmReply->ResponseCode)
+ mptscsih_taskmgmt_response_code(ioc,
+ pScsiTmReply->ResponseCode);
+ }
+
+ if (pScsiTmReply && (pScsiTmReply->TaskType ==
+ MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK || pScsiTmReply->TaskType ==
+ MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET)) {
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->taskmgmt_cmds.reply, mr,
+ min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->taskmgmt_cmds.done);
+ return 1;
+ }
+ return 0;
+ }
+
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
if (list_empty(head))
- return;
+ return 1;
- target_reset_list = list_entry(head->next, struct mptsas_target_reset_event, list);
+ target_reset_list = list_entry(head->next,
+ struct mptsas_target_reset_event, list);
- sas_event_data = &target_reset_list->sas_event_data;
- id = sas_event_data->TargetID;
- channel = sas_event_data->Bus;
- hd->resetPending = 0;
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt: completed (%d seconds)\n",
+ ioc->name, jiffies_to_msecs(jiffies -
+ target_reset_list->time_count)/1000));
+
+ id = pScsiTmReply->TargetID;
+ channel = pScsiTmReply->Bus;
+ target_reset_list->time_count = jiffies;
/*
* retry target reset
*/
if (!target_reset_list->target_reset_issued) {
- if (mptsas_target_reset(ioc, channel, id)) {
+ if (mptsas_target_reset(ioc, channel, id))
target_reset_list->target_reset_issued = 1;
- hd->resetPending = 1;
- }
- return;
+ return 1;
}
/*
* enable work queue to remove device from upper layers
*/
list_del(&target_reset_list->list);
+ if ((mptsas_find_vtarget(ioc, channel, id)) && !ioc->fw_events_off)
+ mptsas_queue_device_delete(ioc,
+ &target_reset_list->sas_event_data);
- ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev) {
- dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, failed to allocate mem @%d..!!\n",
- ioc->name,__func__, __LINE__));
- return;
- }
-
- INIT_WORK(&ev->work, mptsas_hotplug_work);
- ev->ioc = ioc;
- ev->handle = le16_to_cpu(sas_event_data->DevHandle);
- ev->parent_handle =
- le16_to_cpu(sas_event_data->ParentDevHandle);
- ev->channel = channel;
- ev->id =id;
- ev->phy_id = sas_event_data->PhyNum;
- memcpy(&sas_address, &sas_event_data->SASAddress,
- sizeof(__le64));
- ev->sas_address = le64_to_cpu(sas_address);
- ev->device_info = le32_to_cpu(sas_event_data->DeviceInfo);
- ev->event_type = MPTSAS_DEL_DEVICE;
- schedule_work(&ev->work);
- kfree(target_reset_list);
/*
* issue target reset to next device in the queue
@@ -699,34 +1217,19 @@
head = &hd->target_reset_list;
if (list_empty(head))
- return;
+ return 1;
target_reset_list = list_entry(head->next, struct mptsas_target_reset_event,
list);
- sas_event_data = &target_reset_list->sas_event_data;
- id = sas_event_data->TargetID;
- channel = sas_event_data->Bus;
+ id = target_reset_list->sas_event_data.TargetID;
+ channel = target_reset_list->sas_event_data.Bus;
+ target_reset_list->time_count = jiffies;
- if (mptsas_target_reset(ioc, channel, id)) {
+ if (mptsas_target_reset(ioc, channel, id))
target_reset_list->target_reset_issued = 1;
- hd->resetPending = 1;
- }
-}
-/**
- * mptsas_taskmgmt_complete
- *
- * @ioc
- * @mf
- * @mr
- *
- **/
-static int
-mptsas_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
-{
- mptsas_dev_reset_complete(ioc);
- return mptscsih_taskmgmt_complete(ioc, mf, mr);
+ return 1;
}
/**
@@ -740,37 +1243,59 @@
mptsas_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
MPT_SCSI_HOST *hd;
- struct mptsas_target_reset_event *target_reset_list, *n;
int rc;
rc = mptscsih_ioc_reset(ioc, reset_phase);
+ if ((ioc->bus_type != SAS) || (!rc))
+ return rc;
- if (ioc->bus_type != SAS)
- goto out;
-
- if (reset_phase != MPT_IOC_POST_RESET)
- goto out;
-
- if (!ioc->sh || !ioc->sh->hostdata)
- goto out;
hd = shost_priv(ioc->sh);
if (!hd->ioc)
goto out;
- if (list_empty(&hd->target_reset_list))
- goto out;
-
- /* flush the target_reset_list */
- list_for_each_entry_safe(target_reset_list, n,
- &hd->target_reset_list, list) {
- list_del(&target_reset_list->list);
- kfree(target_reset_list);
+ switch (reset_phase) {
+ case MPT_IOC_SETUP_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+ mptsas_fw_event_off(ioc);
+ break;
+ case MPT_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_POST_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+ if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->sas_mgmt.status |= MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->sas_mgmt.done);
+ }
+ mptsas_cleanup_fw_event_q(ioc);
+ mptsas_queue_rescan(ioc);
+ mptsas_fw_event_on(ioc);
+ break;
+ default:
+ break;
}
out:
return rc;
}
+
+/**
+ * enum device_state -
+ * @DEVICE_RETRY: need to retry the TUR
+ * @DEVICE_ERROR: TUR return error, don't add device
+ * @DEVICE_READY: device can be added
+ *
+ */
+enum device_state{
+ DEVICE_RETRY,
+ DEVICE_ERROR,
+ DEVICE_READY,
+};
+
static int
mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
u32 form, u32 form_specific)
@@ -836,15 +1361,308 @@
return error;
}
+/**
+ * mptsas_add_end_device - report a new end device to sas transport layer
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @phy_info: decribes attached device
+ *
+ * return (0) success (1) failure
+ *
+ **/
+static int
+mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+ struct sas_rphy *rphy;
+ struct sas_port *port;
+ struct sas_identify identify;
+ char *ds = NULL;
+ u8 fw_id;
+
+ if (!phy_info) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __func__, __LINE__));
+ return 1;
+ }
+
+ fw_id = phy_info->attached.id;
+
+ if (mptsas_get_rphy(phy_info)) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, fw_id, __LINE__));
+ return 2;
+ }
+
+ port = mptsas_get_port(phy_info);
+ if (!port) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, fw_id, __LINE__));
+ return 3;
+ }
+
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ ds = "ssp";
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "stp";
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "sata";
+
+ printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d,"
+ " phy %d, sas_addr 0x%llx\n", ioc->name, ds,
+ phy_info->attached.channel, phy_info->attached.id,
+ phy_info->attached.phy_id, (unsigned long long)
+ phy_info->attached.sas_address);
+
+ mptsas_parse_device_info(&identify, &phy_info->attached);
+ rphy = sas_end_device_alloc(port);
+ if (!rphy) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, fw_id, __LINE__));
+ return 5; /* non-fatal: an rphy can be added later */
+ }
+
+ rphy->identify = identify;
+ if (sas_rphy_add(rphy)) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, fw_id, __LINE__));
+ sas_rphy_free(rphy);
+ return 6;
+ }
+ mptsas_set_rphy(ioc, phy_info, rphy);
+ return 0;
+}
+
+/**
+ * mptsas_del_end_device - report a deleted end device to sas transport layer
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @phy_info: decribes attached device
+ *
+ **/
+static void
+mptsas_del_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
+{
+ struct sas_rphy *rphy;
+ struct sas_port *port;
+ struct mptsas_portinfo *port_info;
+ struct mptsas_phyinfo *phy_info_parent;
+ int i;
+ char *ds = NULL;
+ u8 fw_id;
+ u64 sas_address;
+
+ if (!phy_info)
+ return;
+
+ fw_id = phy_info->attached.id;
+ sas_address = phy_info->attached.sas_address;
+
+ if (!phy_info->port_details) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, fw_id, __LINE__));
+ return;
+ }
+ rphy = mptsas_get_rphy(phy_info);
+ if (!rphy) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, fw_id, __LINE__));
+ return;
+ }
+
+ if (phy_info->attached.device_info & MPI_SAS_DEVICE_INFO_SSP_INITIATOR
+ || phy_info->attached.device_info
+ & MPI_SAS_DEVICE_INFO_SMP_INITIATOR
+ || phy_info->attached.device_info
+ & MPI_SAS_DEVICE_INFO_STP_INITIATOR)
+ ds = "initiator";
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SSP_TARGET)
+ ds = "ssp";
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_STP_TARGET)
+ ds = "stp";
+ if (phy_info->attached.device_info &
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)
+ ds = "sata";
+
+ dev_printk(KERN_DEBUG, &rphy->dev, MYIOC_s_FMT
+ "removing %s device: fw_channel %d, fw_id %d, phy %d,"
+ "sas_addr 0x%llx\n", ioc->name, ds, phy_info->attached.channel,
+ phy_info->attached.id, phy_info->attached.phy_id,
+ (unsigned long long) sas_address);
+
+ port = mptsas_get_port(phy_info);
+ if (!port) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, fw_id, __LINE__));
+ return;
+ }
+ port_info = phy_info->portinfo;
+ phy_info_parent = port_info->phy_info;
+ for (i = 0; i < port_info->num_phys; i++, phy_info_parent++) {
+ if (!phy_info_parent->phy)
+ continue;
+ if (phy_info_parent->attached.sas_address !=
+ sas_address)
+ continue;
+ dev_printk(KERN_DEBUG, &phy_info_parent->phy->dev,
+ MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n",
+ ioc->name, phy_info_parent->phy_id,
+ phy_info_parent->phy);
+ sas_port_delete_phy(port, phy_info_parent->phy);
+ }
+
+ dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
+ "delete port %d, sas_addr (0x%llx)\n", ioc->name,
+ port->port_identifier, (unsigned long long)sas_address);
+ sas_port_delete(port);
+ mptsas_set_port(ioc, phy_info, NULL);
+ mptsas_port_delete(ioc, phy_info->port_details);
+}
+
+struct mptsas_phyinfo *
+mptsas_refreshing_device_handles(MPT_ADAPTER *ioc,
+ struct mptsas_devinfo *sas_device)
+{
+ struct mptsas_phyinfo *phy_info;
+ struct mptsas_portinfo *port_info;
+ int i;
+
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ sas_device->sas_address);
+ if (!phy_info)
+ goto out;
+ port_info = phy_info->portinfo;
+ if (!port_info)
+ goto out;
+ mutex_lock(&ioc->sas_topology_mutex);
+ for (i = 0; i < port_info->num_phys; i++) {
+ if (port_info->phy_info[i].attached.sas_address !=
+ sas_device->sas_address)
+ continue;
+ port_info->phy_info[i].attached.channel = sas_device->channel;
+ port_info->phy_info[i].attached.id = sas_device->id;
+ port_info->phy_info[i].attached.sas_address =
+ sas_device->sas_address;
+ port_info->phy_info[i].attached.handle = sas_device->handle;
+ port_info->phy_info[i].attached.handle_parent =
+ sas_device->handle_parent;
+ port_info->phy_info[i].attached.handle_enclosure =
+ sas_device->handle_enclosure;
+ }
+ mutex_unlock(&ioc->sas_topology_mutex);
+ out:
+ return phy_info;
+}
+
+/**
+ * mptsas_firmware_event_work - work thread for processing fw events
+ * @work: work queue payload containing info describing the event
+ * Context: user
+ *
+ */
+static void
+mptsas_firmware_event_work(struct work_struct *work)
+{
+ struct fw_event_work *fw_event =
+ container_of(work, struct fw_event_work, work.work);
+ MPT_ADAPTER *ioc = fw_event->ioc;
+
+ /* special rescan topology handling */
+ if (fw_event->event == -1) {
+ if (ioc->in_rescan) {
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: rescan ignored as it is in progress\n",
+ ioc->name, __func__));
+ return;
+ }
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after "
+ "reset\n", ioc->name, __func__));
+ ioc->in_rescan = 1;
+ mptsas_not_responding_devices(ioc);
+ mptsas_scan_sas_topology(ioc);
+ ioc->in_rescan = 0;
+ mptsas_free_fw_event(ioc, fw_event);
+ return;
+ }
+
+ /* events handling turned off during host reset */
+ if (ioc->fw_events_off) {
+ mptsas_free_fw_event(ioc, fw_event);
+ return;
+ }
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), "
+ "event = (0x%02x)\n", ioc->name, __func__, fw_event,
+ (fw_event->event & 0xFF)));
+
+ switch (fw_event->event) {
+ case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
+ mptsas_send_sas_event(fw_event);
+ break;
+ case MPI_EVENT_INTEGRATED_RAID:
+ mptsas_send_raid_event(fw_event);
+ break;
+ case MPI_EVENT_IR2:
+ mptsas_send_ir2_event(fw_event);
+ break;
+ case MPI_EVENT_PERSISTENT_TABLE_FULL:
+ mptbase_sas_persist_operation(ioc,
+ MPI_SAS_OP_CLEAR_NOT_PRESENT);
+ mptsas_free_fw_event(ioc, fw_event);
+ break;
+ case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+ mptsas_broadcast_primative_work(fw_event);
+ break;
+ case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+ mptsas_send_expander_event(fw_event);
+ break;
+ case MPI_EVENT_SAS_PHY_LINK_STATUS:
+ mptsas_send_link_status_event(fw_event);
+ break;
+ case MPI_EVENT_QUEUE_FULL:
+ mptsas_handle_queue_full_event(fw_event);
+ break;
+ }
+}
+
+
+
static int
mptsas_slave_configure(struct scsi_device *sdev)
{
+ struct Scsi_Host *host = sdev->host;
+ MPT_SCSI_HOST *hd = shost_priv(host);
+ MPT_ADAPTER *ioc = hd->ioc;
+ VirtDevice *vdevice = sdev->hostdata;
- if (sdev->channel == MPTSAS_RAID_CHANNEL)
+ if (vdevice->vtarget->deleted) {
+ sdev_printk(KERN_INFO, sdev, "clearing deleted flag\n");
+ vdevice->vtarget->deleted = 0;
+ }
+
+ /*
+ * RAID volumes placed beyond the last expected port.
+ * Ignore sending sas mode pages in that case..
+ */
+ if (sdev->channel == MPTSAS_RAID_CHANNEL) {
+ mptsas_add_device_component_starget_ir(ioc, scsi_target(sdev));
goto out;
+ }
sas_read_port_mode_page(sdev);
+ mptsas_add_device_component_starget(ioc, scsi_target(sdev));
+
out:
return mptscsih_slave_configure(sdev);
}
@@ -875,9 +1693,18 @@
* RAID volumes placed beyond the last expected port.
*/
if (starget->channel == MPTSAS_RAID_CHANNEL) {
- for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
- if (id == ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID)
- channel = ioc->raid_data.pIocPg2->RaidVolume[i].VolumeBus;
+ if (!ioc->raid_data.pIocPg2) {
+ kfree(vtarget);
+ return -ENXIO;
+ }
+ for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+ if (id == ioc->raid_data.pIocPg2->
+ RaidVolume[i].VolumeID) {
+ channel = ioc->raid_data.pIocPg2->
+ RaidVolume[i].VolumeBus;
+ }
+ }
+ vtarget->raidVolume = 1;
goto out;
}
@@ -926,11 +1753,18 @@
struct sas_rphy *rphy;
struct mptsas_portinfo *p;
int i;
- MPT_ADAPTER *ioc = hd->ioc;
+ MPT_ADAPTER *ioc = hd->ioc;
+ VirtTarget *vtarget;
if (!starget->hostdata)
return;
+ vtarget = starget->hostdata;
+
+ mptsas_del_device_component_by_os(ioc, starget->channel,
+ starget->id);
+
+
if (starget->channel == MPTSAS_RAID_CHANNEL)
goto out;
@@ -940,12 +1774,21 @@
if (p->phy_info[i].attached.sas_address !=
rphy->identify.sas_address)
continue;
+
+ starget_printk(KERN_INFO, starget, MYIOC_s_FMT
+ "delete device: fw_channel %d, fw_id %d, phy %d, "
+ "sas_addr 0x%llx\n", ioc->name,
+ p->phy_info[i].attached.channel,
+ p->phy_info[i].attached.id,
+ p->phy_info[i].attached.phy_id, (unsigned long long)
+ p->phy_info[i].attached.sas_address);
+
mptsas_set_starget(&p->phy_info[i], NULL);
- goto out;
}
}
out:
+ vtarget->starget = NULL;
kfree(starget->hostdata);
starget->hostdata = NULL;
}
@@ -1008,6 +1851,8 @@
static int
mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
{
+ MPT_SCSI_HOST *hd;
+ MPT_ADAPTER *ioc;
VirtDevice *vdevice = SCpnt->device->hostdata;
if (!vdevice || !vdevice->vtarget || vdevice->vtarget->deleted) {
@@ -1016,6 +1861,12 @@
return 0;
}
+ hd = shost_priv(SCpnt->device->host);
+ ioc = hd->ioc;
+
+ if (ioc->sas_discovery_quiesce_io)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
// scsi_print_command(SCpnt);
return mptscsih_qcmd(SCpnt,done);
@@ -1114,14 +1965,19 @@
static int mptsas_mgmt_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
MPT_FRAME_HDR *reply)
{
- ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_COMMAND_GOOD;
+ ioc->sas_mgmt.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
if (reply != NULL) {
- ioc->sas_mgmt.status |= MPT_SAS_MGMT_STATUS_RF_VALID;
+ ioc->sas_mgmt.status |= MPT_MGMT_STATUS_RF_VALID;
memcpy(ioc->sas_mgmt.reply, reply,
min(ioc->reply_sz, 4 * reply->u.reply.MsgLength));
}
- complete(&ioc->sas_mgmt.done);
- return 1;
+
+ if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->sas_mgmt.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->sas_mgmt.done);
+ return 1;
+ }
+ return 0;
}
static int mptsas_phy_reset(struct sas_phy *phy, int hard_reset)
@@ -1160,6 +2016,7 @@
MPI_SAS_OP_PHY_HARD_RESET : MPI_SAS_OP_PHY_LINK_RESET;
req->PhyNum = phy->identify.phy_identifier;
+ INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done,
@@ -1174,7 +2031,7 @@
/* a reply frame is expected */
if ((ioc->sas_mgmt.status &
- MPT_IOCTL_STATUS_RF_VALID) == 0) {
+ MPT_MGMT_STATUS_RF_VALID) == 0) {
error = -ENXIO;
goto out_unlock;
}
@@ -1191,6 +2048,7 @@
error = 0;
out_unlock:
+ CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
mutex_unlock(&ioc->sas_mgmt.mutex);
out:
return error;
@@ -1304,7 +2162,7 @@
struct mptsas_portinfo *port_info;
mutex_lock(&ioc->sas_topology_mutex);
- port_info = mptsas_get_hba_portinfo(ioc);
+ port_info = ioc->hba_port_info;
if (port_info && port_info->phy_info)
sas_address =
port_info->phy_info[0].phy->identify.sas_address;
@@ -1319,26 +2177,32 @@
/* request */
flagsLength = (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
MPI_SGE_FLAGS_END_OF_BUFFER |
- MPI_SGE_FLAGS_DIRECTION |
- mpt_addr_size()) << MPI_SGE_FLAGS_SHIFT;
+ MPI_SGE_FLAGS_DIRECTION)
+ << MPI_SGE_FLAGS_SHIFT;
flagsLength |= (blk_rq_bytes(req) - 4);
dma_addr_out = pci_map_single(ioc->pcidev, bio_data(req->bio),
blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_out)
goto put_mf;
- mpt_add_sge(psge, flagsLength, dma_addr_out);
- psge += (sizeof(u32) + sizeof(dma_addr_t));
+ ioc->add_sge(psge, flagsLength, dma_addr_out);
+ psge += ioc->SGE_size;
/* response */
- flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
+ flagsLength = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
+ MPI_SGE_FLAGS_SYSTEM_ADDRESS |
+ MPI_SGE_FLAGS_IOC_TO_HOST |
+ MPI_SGE_FLAGS_END_OF_BUFFER;
+
+ flagsLength = flagsLength << MPI_SGE_FLAGS_SHIFT;
flagsLength |= blk_rq_bytes(rsp) + 4;
dma_addr_in = pci_map_single(ioc->pcidev, bio_data(rsp->bio),
blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL);
if (!dma_addr_in)
goto unmap;
- mpt_add_sge(psge, flagsLength, dma_addr_in);
+ ioc->add_sge(psge, flagsLength, dma_addr_in);
+ INITIALIZE_MGMT_STATUS(ioc->sas_mgmt.status)
mpt_put_msg_frame(mptsasMgmtCtx, ioc, mf);
timeleft = wait_for_completion_timeout(&ioc->sas_mgmt.done, 10 * HZ);
@@ -1351,7 +2215,7 @@
}
mf = NULL;
- if (ioc->sas_mgmt.status & MPT_IOCTL_STATUS_RF_VALID) {
+ if (ioc->sas_mgmt.status & MPT_MGMT_STATUS_RF_VALID) {
SmpPassthroughReply_t *smprep;
smprep = (SmpPassthroughReply_t *)ioc->sas_mgmt.reply;
@@ -1360,7 +2224,8 @@
req->resid_len = 0;
rsp->resid_len -= smprep->ResponseDataLength;
} else {
- printk(MYIOC_s_ERR_FMT "%s: smp passthru reply failed to be returned\n",
+ printk(MYIOC_s_ERR_FMT
+ "%s: smp passthru reply failed to be returned\n",
ioc->name, __func__);
ret = -ENXIO;
}
@@ -1375,6 +2240,7 @@
if (mf)
mpt_free_msg_frame(ioc, mf);
out_unlock:
+ CLEAR_MGMT_STATUS(ioc->sas_mgmt.status)
mutex_unlock(&ioc->sas_mgmt.mutex);
out:
return ret;
@@ -1438,7 +2304,7 @@
port_info->num_phys = buffer->NumPhys;
port_info->phy_info = kcalloc(port_info->num_phys,
- sizeof(*port_info->phy_info),GFP_KERNEL);
+ sizeof(struct mptsas_phyinfo), GFP_KERNEL);
if (!port_info->phy_info) {
error = -ENOMEM;
goto out_free_consistent;
@@ -1600,10 +2466,6 @@
__le64 sas_address;
int error=0;
- if (ioc->sas_discovery_runtime &&
- mptsas_is_end_device(device_info))
- goto out;
-
hdr.PageVersion = MPI_SASDEVICE0_PAGEVERSION;
hdr.ExtPageLength = 0;
hdr.PageNumber = 0;
@@ -1644,6 +2506,7 @@
mptsas_print_device_pg0(ioc, buffer);
+ memset(device_info, 0, sizeof(struct mptsas_devinfo));
device_info->handle = le16_to_cpu(buffer->DevHandle);
device_info->handle_parent = le16_to_cpu(buffer->ParentDevHandle);
device_info->handle_enclosure =
@@ -1675,7 +2538,9 @@
SasExpanderPage0_t *buffer;
dma_addr_t dma_handle;
int i, error;
+ __le64 sas_address;
+ memset(port_info, 0, sizeof(struct mptsas_portinfo));
hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
hdr.ExtPageLength = 0;
hdr.PageNumber = 0;
@@ -1721,18 +2586,23 @@
}
/* save config data */
- port_info->num_phys = buffer->NumPhys;
+ port_info->num_phys = (buffer->NumPhys) ? buffer->NumPhys : 1;
port_info->phy_info = kcalloc(port_info->num_phys,
- sizeof(*port_info->phy_info),GFP_KERNEL);
+ sizeof(struct mptsas_phyinfo), GFP_KERNEL);
if (!port_info->phy_info) {
error = -ENOMEM;
goto out_free_consistent;
}
+ memcpy(&sas_address, &buffer->SASAddress, sizeof(__le64));
for (i = 0; i < port_info->num_phys; i++) {
port_info->phy_info[i].portinfo = port_info;
port_info->phy_info[i].handle =
le16_to_cpu(buffer->DevHandle);
+ port_info->phy_info[i].identify.sas_address =
+ le64_to_cpu(sas_address);
+ port_info->phy_info[i].identify.handle_parent =
+ le16_to_cpu(buffer->ParentDevHandle);
}
out_free_consistent:
@@ -1752,11 +2622,7 @@
dma_addr_t dma_handle;
int error=0;
- if (ioc->sas_discovery_runtime &&
- mptsas_is_end_device(&phy_info->attached))
- goto out;
-
- hdr.PageVersion = MPI_SASEXPANDER0_PAGEVERSION;
+ hdr.PageVersion = MPI_SASEXPANDER1_PAGEVERSION;
hdr.ExtPageLength = 0;
hdr.PageNumber = 1;
hdr.Reserved1 = 0;
@@ -1791,6 +2657,12 @@
cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
error = mpt_config(ioc, &cfg);
+
+ if (error == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
+ error = -ENODEV;
+ goto out;
+ }
+
if (error)
goto out_free_consistent;
@@ -2010,16 +2882,21 @@
goto out;
}
mptsas_set_port(ioc, phy_info, port);
- dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "sas_port_alloc: port=%p dev=%p port_id=%d\n",
- ioc->name, port, dev, port->port_identifier));
+ devtprintk(ioc, dev_printk(KERN_DEBUG, &port->dev,
+ MYIOC_s_FMT "add port %d, sas_addr (0x%llx)\n",
+ ioc->name, port->port_identifier,
+ (unsigned long long)phy_info->
+ attached.sas_address));
}
- dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_port_add_phy: phy_id=%d\n",
- ioc->name, phy_info->phy_id));
+ dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "sas_port_add_phy: phy_id=%d\n",
+ ioc->name, phy_info->phy_id));
sas_port_add_phy(port, phy_info->phy);
phy_info->sas_port_add_phy = 0;
+ devtprintk(ioc, dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+ MYIOC_s_FMT "add phy %d, phy-obj (0x%p)\n", ioc->name,
+ phy_info->phy_id, phy_info->phy));
}
-
if (!mptsas_get_rphy(phy_info) && port && !port->rphy) {
struct sas_rphy *rphy;
@@ -2032,18 +2909,17 @@
* the adding/removing of devices that occur
* after start of day.
*/
- if (ioc->sas_discovery_runtime &&
- mptsas_is_end_device(&phy_info->attached))
- goto out;
+ if (mptsas_is_end_device(&phy_info->attached) &&
+ phy_info->attached.handle_parent) {
+ goto out;
+ }
mptsas_parse_device_info(&identify, &phy_info->attached);
if (scsi_is_host_device(parent)) {
struct mptsas_portinfo *port_info;
int i;
- mutex_lock(&ioc->sas_topology_mutex);
- port_info = mptsas_get_hba_portinfo(ioc);
- mutex_unlock(&ioc->sas_topology_mutex);
+ port_info = ioc->hba_port_info;
for (i = 0; i < port_info->num_phys; i++)
if (port_info->phy_info[i].identify.sas_address ==
@@ -2102,7 +2978,7 @@
struct mptsas_portinfo *port_info, *hba;
int error = -ENOMEM, i;
- hba = kzalloc(sizeof(*port_info), GFP_KERNEL);
+ hba = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
if (! hba)
goto out;
@@ -2112,9 +2988,10 @@
mptsas_sas_io_unit_pg1(ioc);
mutex_lock(&ioc->sas_topology_mutex);
- port_info = mptsas_get_hba_portinfo(ioc);
+ port_info = ioc->hba_port_info;
if (!port_info) {
- port_info = hba;
+ ioc->hba_port_info = port_info = hba;
+ ioc->hba_port_num_phy = port_info->num_phys;
list_add_tail(&port_info->list, &ioc->sas_topology);
} else {
for (i = 0; i < hba->num_phys; i++) {
@@ -2130,15 +3007,22 @@
hba = NULL;
}
mutex_unlock(&ioc->sas_topology_mutex);
+#if defined(CPQ_CIM)
+ ioc->num_ports = port_info->num_phys;
+#endif
for (i = 0; i < port_info->num_phys; i++) {
mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
MPI_SAS_PHY_PGAD_FORM_SHIFT), i);
-
+ port_info->phy_info[i].identify.handle =
+ port_info->phy_info[i].handle;
mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
- port_info->phy_info[i].handle);
+ port_info->phy_info[i].identify.handle);
+ if (!ioc->hba_port_sas_addr)
+ ioc->hba_port_sas_addr =
+ port_info->phy_info[i].identify.sas_address;
port_info->phy_info[i].identify.phy_id =
port_info->phy_info[i].phy_id = i;
if (port_info->phy_info[i].attached.handle)
@@ -2163,247 +3047,720 @@
return error;
}
-static int
-mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle)
+static void
+mptsas_expander_refresh(MPT_ADAPTER *ioc, struct mptsas_portinfo *port_info)
{
- struct mptsas_portinfo *port_info, *p, *ex;
- struct device *parent;
- struct sas_rphy *rphy;
- int error = -ENOMEM, i, j;
+ struct mptsas_portinfo *parent;
+ struct device *parent_dev;
+ struct sas_rphy *rphy;
+ int i;
+ u64 sas_address; /* expander sas address */
+ u32 handle;
- ex = kzalloc(sizeof(*port_info), GFP_KERNEL);
- if (!ex)
- goto out;
-
- error = mptsas_sas_expander_pg0(ioc, ex,
- (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
- MPI_SAS_EXPAND_PGAD_FORM_SHIFT), *handle);
- if (error)
- goto out_free_port_info;
-
- *handle = ex->phy_info[0].handle;
-
- mutex_lock(&ioc->sas_topology_mutex);
- port_info = mptsas_find_portinfo_by_handle(ioc, *handle);
- if (!port_info) {
- port_info = ex;
- list_add_tail(&port_info->list, &ioc->sas_topology);
- } else {
- for (i = 0; i < ex->num_phys; i++) {
- port_info->phy_info[i].handle =
- ex->phy_info[i].handle;
- port_info->phy_info[i].port_id =
- ex->phy_info[i].port_id;
- }
- kfree(ex->phy_info);
- kfree(ex);
- ex = NULL;
- }
- mutex_unlock(&ioc->sas_topology_mutex);
-
+ handle = port_info->phy_info[0].handle;
+ sas_address = port_info->phy_info[0].identify.sas_address;
for (i = 0; i < port_info->num_phys; i++) {
mptsas_sas_expander_pg1(ioc, &port_info->phy_info[i],
- (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
- MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + *handle);
+ (MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), (i << 16) + handle);
- if (port_info->phy_info[i].identify.handle) {
- mptsas_sas_device_pg0(ioc,
- &port_info->phy_info[i].identify,
- (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
- port_info->phy_info[i].identify.handle);
- port_info->phy_info[i].identify.phy_id =
- port_info->phy_info[i].phy_id;
- }
+ mptsas_sas_device_pg0(ioc,
+ &port_info->phy_info[i].identify,
+ (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ port_info->phy_info[i].identify.handle);
+ port_info->phy_info[i].identify.phy_id =
+ port_info->phy_info[i].phy_id;
if (port_info->phy_info[i].attached.handle) {
mptsas_sas_device_pg0(ioc,
- &port_info->phy_info[i].attached,
- (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
- port_info->phy_info[i].attached.handle);
+ &port_info->phy_info[i].attached,
+ (MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ port_info->phy_info[i].attached.handle);
port_info->phy_info[i].attached.phy_id =
port_info->phy_info[i].phy_id;
}
}
- parent = &ioc->sh->shost_gendev;
- for (i = 0; i < port_info->num_phys; i++) {
- mutex_lock(&ioc->sas_topology_mutex);
- list_for_each_entry(p, &ioc->sas_topology, list) {
- for (j = 0; j < p->num_phys; j++) {
- if (port_info->phy_info[i].identify.handle !=
- p->phy_info[j].attached.handle)
- continue;
- rphy = mptsas_get_rphy(&p->phy_info[j]);
- parent = &rphy->dev;
- }
- }
- mutex_unlock(&ioc->sas_topology_mutex);
- }
-
- mptsas_setup_wide_ports(ioc, port_info);
-
- for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
- mptsas_probe_one_phy(parent, &port_info->phy_info[i],
- ioc->sas_index, 0);
-
- return 0;
-
- out_free_port_info:
- if (ex) {
- kfree(ex->phy_info);
- kfree(ex);
- }
- out:
- return error;
-}
-
-/*
- * mptsas_delete_expander_phys
- *
- *
- * This will traverse topology, and remove expanders
- * that are no longer present
- */
-static void
-mptsas_delete_expander_phys(MPT_ADAPTER *ioc)
-{
- struct mptsas_portinfo buffer;
- struct mptsas_portinfo *port_info, *n, *parent;
- struct mptsas_phyinfo *phy_info;
- struct sas_port * port;
- int i;
- u64 expander_sas_address;
-
mutex_lock(&ioc->sas_topology_mutex);
- list_for_each_entry_safe(port_info, n, &ioc->sas_topology, list) {
-
- if (!(port_info->phy_info[0].identify.device_info &
- MPI_SAS_DEVICE_INFO_SMP_TARGET))
- continue;
-
- if (mptsas_sas_expander_pg0(ioc, &buffer,
- (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
- MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
- port_info->phy_info[0].handle)) {
-
- /*
- * Obtain the port_info instance to the parent port
- */
- parent = mptsas_find_portinfo_by_handle(ioc,
- port_info->phy_info[0].identify.handle_parent);
-
- if (!parent)
- goto next_port;
-
- expander_sas_address =
- port_info->phy_info[0].identify.sas_address;
-
- /*
- * Delete rphys in the parent that point
- * to this expander. The transport layer will
- * cleanup all the children.
- */
- phy_info = parent->phy_info;
- for (i = 0; i < parent->num_phys; i++, phy_info++) {
- port = mptsas_get_port(phy_info);
- if (!port)
- continue;
- if (phy_info->attached.sas_address !=
- expander_sas_address)
- continue;
- dsaswideprintk(ioc,
- dev_printk(KERN_DEBUG, &port->dev,
- MYIOC_s_FMT "delete port (%d)\n", ioc->name,
- port->port_identifier));
- sas_port_delete(port);
- mptsas_port_delete(ioc, phy_info->port_details);
- }
- next_port:
-
- phy_info = port_info->phy_info;
- for (i = 0; i < port_info->num_phys; i++, phy_info++)
- mptsas_port_delete(ioc, phy_info->port_details);
-
- list_del(&port_info->list);
- kfree(port_info->phy_info);
- kfree(port_info);
+ parent = mptsas_find_portinfo_by_handle(ioc,
+ port_info->phy_info[0].identify.handle_parent);
+ if (!parent) {
+ mutex_unlock(&ioc->sas_topology_mutex);
+ return;
+ }
+ for (i = 0, parent_dev = NULL; i < parent->num_phys && !parent_dev;
+ i++) {
+ if (parent->phy_info[i].attached.sas_address == sas_address) {
+ rphy = mptsas_get_rphy(&parent->phy_info[i]);
+ parent_dev = &rphy->dev;
}
- /*
- * Free this memory allocated from inside
- * mptsas_sas_expander_pg0
- */
- kfree(buffer.phy_info);
}
mutex_unlock(&ioc->sas_topology_mutex);
+
+ mptsas_setup_wide_ports(ioc, port_info);
+ for (i = 0; i < port_info->num_phys; i++, ioc->sas_index++)
+ mptsas_probe_one_phy(parent_dev, &port_info->phy_info[i],
+ ioc->sas_index, 0);
}
-/*
- * Start of day discovery
+static void
+mptsas_expander_event_add(MPT_ADAPTER *ioc,
+ MpiEventDataSasExpanderStatusChange_t *expander_data)
+{
+ struct mptsas_portinfo *port_info;
+ int i;
+ __le64 sas_address;
+
+ port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+ if (!port_info)
+ BUG();
+ port_info->num_phys = (expander_data->NumPhys) ?
+ expander_data->NumPhys : 1;
+ port_info->phy_info = kcalloc(port_info->num_phys,
+ sizeof(struct mptsas_phyinfo), GFP_KERNEL);
+ if (!port_info->phy_info)
+ BUG();
+ memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+ for (i = 0; i < port_info->num_phys; i++) {
+ port_info->phy_info[i].portinfo = port_info;
+ port_info->phy_info[i].handle =
+ le16_to_cpu(expander_data->DevHandle);
+ port_info->phy_info[i].identify.sas_address =
+ le64_to_cpu(sas_address);
+ port_info->phy_info[i].identify.handle_parent =
+ le16_to_cpu(expander_data->ParentDevHandle);
+ }
+
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_add_tail(&port_info->list, &ioc->sas_topology);
+ mutex_unlock(&ioc->sas_topology_mutex);
+
+ printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+ "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+ (unsigned long long)sas_address);
+
+ mptsas_expander_refresh(ioc, port_info);
+}
+
+/**
+ * mptsas_delete_expander_siblings - remove siblings attached to expander
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @parent: the parent port_info object
+ * @expander: the expander port_info object
+ **/
+static void
+mptsas_delete_expander_siblings(MPT_ADAPTER *ioc, struct mptsas_portinfo
+ *parent, struct mptsas_portinfo *expander)
+{
+ struct mptsas_phyinfo *phy_info;
+ struct mptsas_portinfo *port_info;
+ struct sas_rphy *rphy;
+ int i;
+
+ phy_info = expander->phy_info;
+ for (i = 0; i < expander->num_phys; i++, phy_info++) {
+ rphy = mptsas_get_rphy(phy_info);
+ if (!rphy)
+ continue;
+ if (rphy->identify.device_type == SAS_END_DEVICE)
+ mptsas_del_end_device(ioc, phy_info);
+ }
+
+ phy_info = expander->phy_info;
+ for (i = 0; i < expander->num_phys; i++, phy_info++) {
+ rphy = mptsas_get_rphy(phy_info);
+ if (!rphy)
+ continue;
+ if (rphy->identify.device_type ==
+ MPI_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+ rphy->identify.device_type ==
+ MPI_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+ port_info = mptsas_find_portinfo_by_sas_address(ioc,
+ rphy->identify.sas_address);
+ if (!port_info)
+ continue;
+ if (port_info == parent) /* backlink rphy */
+ continue;
+ /*
+ Delete this expander even if the expdevpage is exists
+ because the parent expander is already deleted
+ */
+ mptsas_expander_delete(ioc, port_info, 1);
+ }
+ }
+}
+
+
+/**
+ * mptsas_expander_delete - remove this expander
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @port_info: expander port_info struct
+ * @force: Flag to forcefully delete the expander
+ *
+ **/
+
+static void mptsas_expander_delete(MPT_ADAPTER *ioc,
+ struct mptsas_portinfo *port_info, u8 force)
+{
+
+ struct mptsas_portinfo *parent;
+ int i;
+ u64 expander_sas_address;
+ struct mptsas_phyinfo *phy_info;
+ struct mptsas_portinfo buffer;
+ struct mptsas_portinfo_details *port_details;
+ struct sas_port *port;
+
+ if (!port_info)
+ return;
+
+ /* see if expander is still there before deleting */
+ mptsas_sas_expander_pg0(ioc, &buffer,
+ (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT),
+ port_info->phy_info[0].identify.handle);
+
+ if (buffer.num_phys) {
+ kfree(buffer.phy_info);
+ if (!force)
+ return;
+ }
+
+
+ /*
+ * Obtain the port_info instance to the parent port
+ */
+ port_details = NULL;
+ expander_sas_address =
+ port_info->phy_info[0].identify.sas_address;
+ parent = mptsas_find_portinfo_by_handle(ioc,
+ port_info->phy_info[0].identify.handle_parent);
+ mptsas_delete_expander_siblings(ioc, parent, port_info);
+ if (!parent)
+ goto out;
+
+ /*
+ * Delete rphys in the parent that point
+ * to this expander.
+ */
+ phy_info = parent->phy_info;
+ port = NULL;
+ for (i = 0; i < parent->num_phys; i++, phy_info++) {
+ if (!phy_info->phy)
+ continue;
+ if (phy_info->attached.sas_address !=
+ expander_sas_address)
+ continue;
+ if (!port) {
+ port = mptsas_get_port(phy_info);
+ port_details = phy_info->port_details;
+ }
+ dev_printk(KERN_DEBUG, &phy_info->phy->dev,
+ MYIOC_s_FMT "delete phy %d, phy-obj (0x%p)\n", ioc->name,
+ phy_info->phy_id, phy_info->phy);
+ sas_port_delete_phy(port, phy_info->phy);
+ }
+ if (port) {
+ dev_printk(KERN_DEBUG, &port->dev,
+ MYIOC_s_FMT "delete port %d, sas_addr (0x%llx)\n",
+ ioc->name, port->port_identifier,
+ (unsigned long long)expander_sas_address);
+ sas_port_delete(port);
+ mptsas_port_delete(ioc, port_details);
+ }
+ out:
+
+ printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, "
+ "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+ (unsigned long long)expander_sas_address);
+
+ /*
+ * free link
+ */
+ list_del(&port_info->list);
+ kfree(port_info->phy_info);
+ kfree(port_info);
+}
+
+
+/**
+ * mptsas_send_expander_event - expanders events
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @expander_data: event data
+ *
+ *
+ * This function handles adding, removing, and refreshing
+ * device handles within the expander objects.
*/
static void
+mptsas_send_expander_event(struct fw_event_work *fw_event)
+{
+ MPT_ADAPTER *ioc;
+ MpiEventDataSasExpanderStatusChange_t *expander_data;
+ struct mptsas_portinfo *port_info;
+ __le64 sas_address;
+ int i;
+
+ ioc = fw_event->ioc;
+ expander_data = (MpiEventDataSasExpanderStatusChange_t *)
+ fw_event->event_data;
+ memcpy(&sas_address, &expander_data->SASAddress, sizeof(__le64));
+ port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+
+ if (expander_data->ReasonCode == MPI_EVENT_SAS_EXP_RC_ADDED) {
+ if (port_info) {
+ for (i = 0; i < port_info->num_phys; i++) {
+ port_info->phy_info[i].portinfo = port_info;
+ port_info->phy_info[i].handle =
+ le16_to_cpu(expander_data->DevHandle);
+ port_info->phy_info[i].identify.sas_address =
+ le64_to_cpu(sas_address);
+ port_info->phy_info[i].identify.handle_parent =
+ le16_to_cpu(expander_data->ParentDevHandle);
+ }
+ mptsas_expander_refresh(ioc, port_info);
+ } else if (!port_info && expander_data->NumPhys)
+ mptsas_expander_event_add(ioc, expander_data);
+ } else if (expander_data->ReasonCode ==
+ MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING)
+ mptsas_expander_delete(ioc, port_info, 0);
+
+ mptsas_free_fw_event(ioc, fw_event);
+}
+
+
+/**
+ * mptsas_expander_add -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @handle:
+ *
+ */
+struct mptsas_portinfo *
+mptsas_expander_add(MPT_ADAPTER *ioc, u16 handle)
+{
+ struct mptsas_portinfo buffer, *port_info;
+ int i;
+
+ if ((mptsas_sas_expander_pg0(ioc, &buffer,
+ (MPI_SAS_EXPAND_PGAD_FORM_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)))
+ return NULL;
+
+ port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_ATOMIC);
+ if (!port_info) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __func__, __LINE__));
+ return NULL;
+ }
+ port_info->num_phys = buffer.num_phys;
+ port_info->phy_info = buffer.phy_info;
+ for (i = 0; i < port_info->num_phys; i++)
+ port_info->phy_info[i].portinfo = port_info;
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_add_tail(&port_info->list, &ioc->sas_topology);
+ mutex_unlock(&ioc->sas_topology_mutex);
+ printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+ "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+ (unsigned long long)buffer.phy_info[0].identify.sas_address);
+ mptsas_expander_refresh(ioc, port_info);
+ return port_info;
+}
+
+static void
+mptsas_send_link_status_event(struct fw_event_work *fw_event)
+{
+ MPT_ADAPTER *ioc;
+ MpiEventDataSasPhyLinkStatus_t *link_data;
+ struct mptsas_portinfo *port_info;
+ struct mptsas_phyinfo *phy_info = NULL;
+ __le64 sas_address;
+ u8 phy_num;
+ u8 link_rate;
+
+ ioc = fw_event->ioc;
+ link_data = (MpiEventDataSasPhyLinkStatus_t *)fw_event->event_data;
+
+ memcpy(&sas_address, &link_data->SASAddress, sizeof(__le64));
+ sas_address = le64_to_cpu(sas_address);
+ link_rate = link_data->LinkRates >> 4;
+ phy_num = link_data->PhyNum;
+
+ port_info = mptsas_find_portinfo_by_sas_address(ioc, sas_address);
+ if (port_info) {
+ phy_info = &port_info->phy_info[phy_num];
+ if (phy_info)
+ phy_info->negotiated_link_rate = link_rate;
+ }
+
+ if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
+ link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
+
+ if (!port_info) {
+ if (ioc->old_sas_discovery_protocal) {
+ port_info = mptsas_expander_add(ioc,
+ le16_to_cpu(link_data->DevHandle));
+ if (port_info)
+ goto out;
+ }
+ goto out;
+ }
+
+ if (port_info == ioc->hba_port_info)
+ mptsas_probe_hba_phys(ioc);
+ else
+ mptsas_expander_refresh(ioc, port_info);
+ } else if (phy_info && phy_info->phy) {
+ if (link_rate == MPI_SAS_IOUNIT0_RATE_PHY_DISABLED)
+ phy_info->phy->negotiated_linkrate =
+ SAS_PHY_DISABLED;
+ else if (link_rate ==
+ MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION)
+ phy_info->phy->negotiated_linkrate =
+ SAS_LINK_RATE_FAILED;
+ else
+ phy_info->phy->negotiated_linkrate =
+ SAS_LINK_RATE_UNKNOWN;
+ }
+ out:
+ mptsas_free_fw_event(ioc, fw_event);
+}
+
+static void
+mptsas_not_responding_devices(MPT_ADAPTER *ioc)
+{
+ struct mptsas_portinfo buffer, *port_info;
+ struct mptsas_device_info *sas_info;
+ struct mptsas_devinfo sas_device;
+ u32 handle;
+ VirtTarget *vtarget = NULL;
+ struct mptsas_phyinfo *phy_info;
+ u8 found_expander;
+ int retval, retry_count;
+ unsigned long flags;
+
+ mpt_findImVolumes(ioc);
+
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: exiting due to a parallel reset \n", ioc->name,
+ __func__));
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+
+ /* devices, logical volumes */
+ mutex_lock(&ioc->sas_device_info_mutex);
+ redo_device_scan:
+ list_for_each_entry(sas_info, &ioc->sas_device_info_list, list) {
+ if (sas_info->is_cached)
+ continue;
+ if (!sas_info->is_logical_volume) {
+ sas_device.handle = 0;
+ retry_count = 0;
+retry_page:
+ retval = mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID
+ << MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (sas_info->fw.channel << 8) +
+ sas_info->fw.id);
+
+ if (sas_device.handle)
+ continue;
+ if (retval == -EBUSY) {
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ dfailprintk(ioc,
+ printk(MYIOC_s_DEBUG_FMT
+ "%s: exiting due to reset\n",
+ ioc->name, __func__));
+ spin_unlock_irqrestore
+ (&ioc->taskmgmt_lock, flags);
+ mutex_unlock(&ioc->
+ sas_device_info_mutex);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock,
+ flags);
+ }
+
+ if (retval && (retval != -ENODEV)) {
+ if (retry_count < 10) {
+ retry_count++;
+ goto retry_page;
+ } else {
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Config page retry exceeded retry "
+ "count deleting device 0x%llx\n",
+ ioc->name, __func__,
+ sas_info->sas_address));
+ }
+ }
+
+ /* delete device */
+ vtarget = mptsas_find_vtarget(ioc,
+ sas_info->fw.channel, sas_info->fw.id);
+
+ if (vtarget)
+ vtarget->deleted = 1;
+
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ sas_info->sas_address);
+
+ if (phy_info) {
+ mptsas_del_end_device(ioc, phy_info);
+ goto redo_device_scan;
+ }
+ } else
+ mptsas_volume_delete(ioc, sas_info->fw.id);
+ }
+ mutex_lock(&ioc->sas_device_info_mutex);
+
+ /* expanders */
+ mutex_lock(&ioc->sas_topology_mutex);
+ redo_expander_scan:
+ list_for_each_entry(port_info, &ioc->sas_topology, list) {
+
+ if (port_info->phy_info &&
+ (!(port_info->phy_info[0].identify.device_info &
+ MPI_SAS_DEVICE_INFO_SMP_TARGET)))
+ continue;
+ found_expander = 0;
+ handle = 0xFFFF;
+ while (!mptsas_sas_expander_pg0(ioc, &buffer,
+ (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle) &&
+ !found_expander) {
+
+ handle = buffer.phy_info[0].handle;
+ if (buffer.phy_info[0].identify.sas_address ==
+ port_info->phy_info[0].identify.sas_address) {
+ found_expander = 1;
+ }
+ kfree(buffer.phy_info);
+ }
+
+ if (!found_expander) {
+ mptsas_expander_delete(ioc, port_info, 0);
+ goto redo_expander_scan;
+ }
+ }
+ mutex_lock(&ioc->sas_topology_mutex);
+}
+
+/**
+ * mptsas_probe_expanders - adding expanders
+ * @ioc: Pointer to MPT_ADAPTER structure
+ *
+ **/
+static void
+mptsas_probe_expanders(MPT_ADAPTER *ioc)
+{
+ struct mptsas_portinfo buffer, *port_info;
+ u32 handle;
+ int i;
+
+ handle = 0xFFFF;
+ while (!mptsas_sas_expander_pg0(ioc, &buffer,
+ (MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE <<
+ MPI_SAS_EXPAND_PGAD_FORM_SHIFT), handle)) {
+
+ handle = buffer.phy_info[0].handle;
+ port_info = mptsas_find_portinfo_by_sas_address(ioc,
+ buffer.phy_info[0].identify.sas_address);
+
+ if (port_info) {
+ /* refreshing handles */
+ for (i = 0; i < buffer.num_phys; i++) {
+ port_info->phy_info[i].handle = handle;
+ port_info->phy_info[i].identify.handle_parent =
+ buffer.phy_info[0].identify.handle_parent;
+ }
+ mptsas_expander_refresh(ioc, port_info);
+ kfree(buffer.phy_info);
+ continue;
+ }
+
+ port_info = kzalloc(sizeof(struct mptsas_portinfo), GFP_KERNEL);
+ if (!port_info) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: exit at line=%d\n", ioc->name,
+ __func__, __LINE__));
+ return;
+ }
+ port_info->num_phys = buffer.num_phys;
+ port_info->phy_info = buffer.phy_info;
+ for (i = 0; i < port_info->num_phys; i++)
+ port_info->phy_info[i].portinfo = port_info;
+ mutex_lock(&ioc->sas_topology_mutex);
+ list_add_tail(&port_info->list, &ioc->sas_topology);
+ mutex_unlock(&ioc->sas_topology_mutex);
+ printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
+ "sas_addr (0x%llx)\n", ioc->name, port_info->num_phys,
+ (unsigned long long)buffer.phy_info[0].identify.sas_address);
+ mptsas_expander_refresh(ioc, port_info);
+ }
+}
+
+static void
+mptsas_probe_devices(MPT_ADAPTER *ioc)
+{
+ u16 handle;
+ struct mptsas_devinfo sas_device;
+ struct mptsas_phyinfo *phy_info;
+
+ handle = 0xFFFF;
+ while (!(mptsas_sas_device_pg0(ioc, &sas_device,
+ MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
+
+ handle = sas_device.handle;
+
+ if ((sas_device.device_info &
+ (MPI_SAS_DEVICE_INFO_SSP_TARGET |
+ MPI_SAS_DEVICE_INFO_STP_TARGET |
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0)
+ continue;
+
+ phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
+ if (!phy_info)
+ continue;
+
+ if (mptsas_get_rphy(phy_info))
+ continue;
+
+ mptsas_add_end_device(ioc, phy_info);
+ }
+}
+
+/**
+ * mptsas_scan_sas_topology -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @sas_address:
+ *
+ **/
+static void
mptsas_scan_sas_topology(MPT_ADAPTER *ioc)
{
- u32 handle = 0xFFFF;
+ struct scsi_device *sdev;
int i;
- mutex_lock(&ioc->sas_discovery_mutex);
mptsas_probe_hba_phys(ioc);
- while (!mptsas_probe_expander_phys(ioc, &handle))
- ;
+ mptsas_probe_expanders(ioc);
+ mptsas_probe_devices(ioc);
+
/*
Reporting RAID volumes.
*/
- if (!ioc->ir_firmware)
- goto out;
- if (!ioc->raid_data.pIocPg2)
- goto out;
- if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
- goto out;
+ if (!ioc->ir_firmware || !ioc->raid_data.pIocPg2 ||
+ !ioc->raid_data.pIocPg2->NumActiveVolumes)
+ return;
for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+ sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+ ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
+ if (sdev) {
+ scsi_device_put(sdev);
+ continue;
+ }
+ printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+ "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+ ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID);
scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID, 0);
}
+}
+
+
+static void
+mptsas_handle_queue_full_event(struct fw_event_work *fw_event)
+{
+ MPT_ADAPTER *ioc;
+ EventDataQueueFull_t *qfull_data;
+ struct mptsas_device_info *sas_info;
+ struct scsi_device *sdev;
+ int depth;
+ int id = -1;
+ int channel = -1;
+ int fw_id, fw_channel;
+ u16 current_depth;
+
+
+ ioc = fw_event->ioc;
+ qfull_data = (EventDataQueueFull_t *)fw_event->event_data;
+ fw_id = qfull_data->TargetID;
+ fw_channel = qfull_data->Bus;
+ current_depth = le16_to_cpu(qfull_data->CurrentDepth);
+
+ /* if hidden raid component, look for the volume id */
+ mutex_lock(&ioc->sas_device_info_mutex);
+ if (mptscsih_is_phys_disk(ioc, fw_channel, fw_id)) {
+ list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+ list) {
+ if (sas_info->is_cached ||
+ sas_info->is_logical_volume)
+ continue;
+ if (sas_info->is_hidden_raid_component &&
+ (sas_info->fw.channel == fw_channel &&
+ sas_info->fw.id == fw_id)) {
+ id = sas_info->volume_id;
+ channel = MPTSAS_RAID_CHANNEL;
+ goto out;
+ }
+ }
+ } else {
+ list_for_each_entry(sas_info, &ioc->sas_device_info_list,
+ list) {
+ if (sas_info->is_cached ||
+ sas_info->is_hidden_raid_component ||
+ sas_info->is_logical_volume)
+ continue;
+ if (sas_info->fw.channel == fw_channel &&
+ sas_info->fw.id == fw_id) {
+ id = sas_info->os.id;
+ channel = sas_info->os.channel;
+ goto out;
+ }
+ }
+
+ }
+
out:
- mutex_unlock(&ioc->sas_discovery_mutex);
+ mutex_unlock(&ioc->sas_device_info_mutex);
+
+ if (id != -1) {
+ shost_for_each_device(sdev, ioc->sh) {
+ if (sdev->id == id && sdev->channel == channel) {
+ if (current_depth > sdev->queue_depth) {
+ sdev_printk(KERN_INFO, sdev,
+ "strange observation, the queue "
+ "depth is (%d) meanwhile fw queue "
+ "depth (%d)\n", sdev->queue_depth,
+ current_depth);
+ continue;
+ }
+ depth = scsi_track_queue_full(sdev,
+ current_depth - 1);
+ if (depth > 0)
+ sdev_printk(KERN_INFO, sdev,
+ "Queue depth reduced to (%d)\n",
+ depth);
+ else if (depth < 0)
+ sdev_printk(KERN_INFO, sdev,
+ "Tagged Command Queueing is being "
+ "disabled\n");
+ else if (depth == 0)
+ sdev_printk(KERN_INFO, sdev,
+ "Queue depth not changed yet\n");
+ }
+ }
+ }
+
+ mptsas_free_fw_event(ioc, fw_event);
}
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex UNLOCKED)
- */
-static void
-__mptsas_discovery_work(MPT_ADAPTER *ioc)
-{
- u32 handle = 0xFFFF;
-
- ioc->sas_discovery_runtime=1;
- mptsas_delete_expander_phys(ioc);
- mptsas_probe_hba_phys(ioc);
- while (!mptsas_probe_expander_phys(ioc, &handle))
- ;
- ioc->sas_discovery_runtime=0;
-}
-
-/*
- * Work queue thread to handle Runtime discovery
- * Mere purpose is the hot add/delete of expanders
- *(Mutex LOCKED)
- */
-static void
-mptsas_discovery_work(struct work_struct *work)
-{
- struct mptsas_discovery_event *ev =
- container_of(work, struct mptsas_discovery_event, work);
- MPT_ADAPTER *ioc = ev->ioc;
-
- mutex_lock(&ioc->sas_discovery_mutex);
- __mptsas_discovery_work(ioc);
- mutex_unlock(&ioc->sas_discovery_mutex);
- kfree(ev);
-}
static struct mptsas_phyinfo *
mptsas_find_phyinfo_by_sas_address(MPT_ADAPTER *ioc, u64 sas_address)
@@ -2429,69 +3786,80 @@
return phy_info;
}
+/**
+ * mptsas_find_phyinfo_by_phys_disk_num -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @phys_disk_num:
+ * @channel:
+ * @id:
+ *
+ **/
static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_target(MPT_ADAPTER *ioc, u8 channel, u8 id)
+mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 phys_disk_num,
+ u8 channel, u8 id)
{
- struct mptsas_portinfo *port_info;
struct mptsas_phyinfo *phy_info = NULL;
+ struct mptsas_portinfo *port_info;
+ RaidPhysDiskPage1_t *phys_disk = NULL;
+ int num_paths;
+ u64 sas_address = 0;
int i;
- mutex_lock(&ioc->sas_topology_mutex);
- list_for_each_entry(port_info, &ioc->sas_topology, list) {
- for (i = 0; i < port_info->num_phys; i++) {
- if (!mptsas_is_end_device(
- &port_info->phy_info[i].attached))
- continue;
- if (port_info->phy_info[i].attached.id != id)
- continue;
- if (port_info->phy_info[i].attached.channel != channel)
- continue;
- phy_info = &port_info->phy_info[i];
- break;
+ phy_info = NULL;
+ if (!ioc->raid_data.pIocPg3)
+ return NULL;
+ /* dual port support */
+ num_paths = mpt_raid_phys_disk_get_num_paths(ioc, phys_disk_num);
+ if (!num_paths)
+ goto out;
+ phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+ (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+ if (!phys_disk)
+ goto out;
+ mpt_raid_phys_disk_pg1(ioc, phys_disk_num, phys_disk);
+ for (i = 0; i < num_paths; i++) {
+ if ((phys_disk->Path[i].Flags & 1) != 0)
+ /* entry no longer valid */
+ continue;
+ if ((id == phys_disk->Path[i].PhysDiskID) &&
+ (channel == phys_disk->Path[i].PhysDiskBus)) {
+ memcpy(&sas_address, &phys_disk->Path[i].WWID,
+ sizeof(u64));
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ sas_address);
+ goto out;
}
}
- mutex_unlock(&ioc->sas_topology_mutex);
- return phy_info;
-}
-static struct mptsas_phyinfo *
-mptsas_find_phyinfo_by_phys_disk_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
-{
- struct mptsas_portinfo *port_info;
- struct mptsas_phyinfo *phy_info = NULL;
- int i;
+ out:
+ kfree(phys_disk);
+ if (phy_info)
+ return phy_info;
+ /*
+ * Extra code to handle RAID0 case, where the sas_address is not updated
+ * in phys_disk_page_1 when hotswapped
+ */
mutex_lock(&ioc->sas_topology_mutex);
list_for_each_entry(port_info, &ioc->sas_topology, list) {
- for (i = 0; i < port_info->num_phys; i++) {
+ for (i = 0; i < port_info->num_phys && !phy_info; i++) {
if (!mptsas_is_end_device(
&port_info->phy_info[i].attached))
continue;
if (port_info->phy_info[i].attached.phys_disk_num == ~0)
continue;
- if (port_info->phy_info[i].attached.phys_disk_num != id)
- continue;
- if (port_info->phy_info[i].attached.channel != channel)
- continue;
- phy_info = &port_info->phy_info[i];
- break;
+ if ((port_info->phy_info[i].attached.phys_disk_num ==
+ phys_disk_num) &&
+ (port_info->phy_info[i].attached.id == id) &&
+ (port_info->phy_info[i].attached.channel ==
+ channel))
+ phy_info = &port_info->phy_info[i];
}
}
mutex_unlock(&ioc->sas_topology_mutex);
return phy_info;
}
-/*
- * Work queue thread to clear the persitency table
- */
-static void
-mptsas_persist_clear_table(struct work_struct *work)
-{
- MPT_ADAPTER *ioc = container_of(work, MPT_ADAPTER, sas_persist_task);
-
- mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT);
-}
-
static void
mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
{
@@ -2517,7 +3885,8 @@
pRaidVolumePage0_t buffer = NULL;
RaidPhysDiskPage0_t phys_disk;
int i;
- struct mptsas_hotplug_event *ev;
+ struct mptsas_phyinfo *phy_info;
+ struct mptsas_devinfo sas_device;
memset(&cfg, 0 , sizeof(CONFIGPARMS));
memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
@@ -2557,20 +3926,16 @@
buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
continue;
- ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev) {
- printk(MYIOC_s_WARN_FMT "mptsas: lost hotplug event\n", ioc->name);
- goto out;
- }
+ if (mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (phys_disk.PhysDiskBus << 8) +
+ phys_disk.PhysDiskID))
+ continue;
- INIT_WORK(&ev->work, mptsas_hotplug_work);
- ev->ioc = ioc;
- ev->id = phys_disk.PhysDiskID;
- ev->channel = phys_disk.PhysDiskBus;
- ev->phys_disk_num_valid = 1;
- ev->phys_disk_num = phys_disk.PhysDiskNum;
- ev->event_type = MPTSAS_ADD_DEVICE;
- schedule_work(&ev->work);
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ sas_device.sas_address);
+ mptsas_add_end_device(ioc, phy_info);
}
out:
@@ -2582,417 +3947,386 @@
* Work queue thread to handle SAS hotplug events
*/
static void
-mptsas_hotplug_work(struct work_struct *work)
+mptsas_hotplug_work(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
+ struct mptsas_hotplug_event *hot_plug_info)
{
- struct mptsas_hotplug_event *ev =
- container_of(work, struct mptsas_hotplug_event, work);
-
- MPT_ADAPTER *ioc = ev->ioc;
struct mptsas_phyinfo *phy_info;
- struct sas_rphy *rphy;
- struct sas_port *port;
- struct scsi_device *sdev;
struct scsi_target * starget;
- struct sas_identify identify;
- char *ds = NULL;
struct mptsas_devinfo sas_device;
VirtTarget *vtarget;
- VirtDevice *vdevice;
+ int i;
- mutex_lock(&ioc->sas_discovery_mutex);
- switch (ev->event_type) {
- case MPTSAS_DEL_DEVICE:
+ switch (hot_plug_info->event_type) {
- phy_info = NULL;
- if (ev->phys_disk_num_valid) {
- if (ev->hidden_raid_component){
- if (mptsas_sas_device_pg0(ioc, &sas_device,
- (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
- MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
- (ev->channel << 8) + ev->id)) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- break;
- }
- phy_info = mptsas_find_phyinfo_by_sas_address(
- ioc, sas_device.sas_address);
- }else
- phy_info = mptsas_find_phyinfo_by_phys_disk_num(
- ioc, ev->channel, ev->phys_disk_num);
- }
+ case MPTSAS_ADD_PHYSDISK:
- if (!phy_info)
- phy_info = mptsas_find_phyinfo_by_target(ioc,
- ev->channel, ev->id);
-
- /*
- * Sanity checks, for non-existing phys and remote rphys.
- */
- if (!phy_info){
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
+ if (!ioc->raid_data.pIocPg2)
break;
- }
- if (!phy_info->port_details) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- break;
- }
- rphy = mptsas_get_rphy(phy_info);
- if (!rphy) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- break;
- }
- port = mptsas_get_port(phy_info);
- if (!port) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- break;
- }
-
- starget = mptsas_get_starget(phy_info);
- if (starget) {
- vtarget = starget->hostdata;
-
- if (!vtarget) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- break;
- }
-
- /*
- * Handling RAID components
- */
- if (ev->phys_disk_num_valid &&
- ev->hidden_raid_component) {
- printk(MYIOC_s_INFO_FMT
- "RAID Hidding: channel=%d, id=%d, "
- "physdsk %d \n", ioc->name, ev->channel,
- ev->id, ev->phys_disk_num);
- vtarget->id = ev->phys_disk_num;
- vtarget->tflags |=
- MPT_TARGET_FLAGS_RAID_COMPONENT;
- mptsas_reprobe_target(starget, 1);
- phy_info->attached.phys_disk_num =
- ev->phys_disk_num;
- break;
+ for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
+ if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID ==
+ hot_plug_info->id) {
+ printk(MYIOC_s_WARN_FMT "firmware bug: unable "
+ "to add hidden disk - target_id matchs "
+ "volume_id\n", ioc->name);
+ mptsas_free_fw_event(ioc, fw_event);
+ return;
}
}
+ mpt_findImVolumes(ioc);
- if (phy_info->attached.device_info &
- MPI_SAS_DEVICE_INFO_SSP_TARGET)
- ds = "ssp";
- if (phy_info->attached.device_info &
- MPI_SAS_DEVICE_INFO_STP_TARGET)
- ds = "stp";
- if (phy_info->attached.device_info &
- MPI_SAS_DEVICE_INFO_SATA_DEVICE)
- ds = "sata";
-
- printk(MYIOC_s_INFO_FMT
- "removing %s device, channel %d, id %d, phy %d\n",
- ioc->name, ds, ev->channel, ev->id, phy_info->phy_id);
- dev_printk(KERN_DEBUG, &port->dev, MYIOC_s_FMT
- "delete port (%d)\n", ioc->name, port->port_identifier);
- sas_port_delete(port);
- mptsas_port_delete(ioc, phy_info->port_details);
- break;
case MPTSAS_ADD_DEVICE:
+ memset(&sas_device, 0, sizeof(struct mptsas_devinfo));
+ mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (hot_plug_info->channel << 8) +
+ hot_plug_info->id);
- if (ev->phys_disk_num_valid)
- mpt_findImVolumes(ioc);
+ if (!sas_device.handle)
+ return;
- /*
- * Refresh sas device pg0 data
- */
+ phy_info = mptsas_refreshing_device_handles(ioc, &sas_device);
+ if (!phy_info)
+ break;
+
+ if (mptsas_get_rphy(phy_info))
+ break;
+
+ mptsas_add_end_device(ioc, phy_info);
+ break;
+
+ case MPTSAS_DEL_DEVICE:
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ hot_plug_info->sas_address);
+ mptsas_del_end_device(ioc, phy_info);
+ break;
+
+ case MPTSAS_DEL_PHYSDISK:
+
+ mpt_findImVolumes(ioc);
+
+ phy_info = mptsas_find_phyinfo_by_phys_disk_num(
+ ioc, hot_plug_info->phys_disk_num,
+ hot_plug_info->channel,
+ hot_plug_info->id);
+ mptsas_del_end_device(ioc, phy_info);
+ break;
+
+ case MPTSAS_ADD_PHYSDISK_REPROBE:
+
if (mptsas_sas_device_pg0(ioc, &sas_device,
(MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
- (ev->channel << 8) + ev->id)) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
+ (hot_plug_info->channel << 8) + hot_plug_info->id)) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
break;
}
- __mptsas_discovery_work(ioc);
+ phy_info = mptsas_find_phyinfo_by_sas_address(
+ ioc, sas_device.sas_address);
- phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
- sas_device.sas_address);
-
- if (!phy_info || !phy_info->port_details) {
+ if (!phy_info) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
break;
}
starget = mptsas_get_starget(phy_info);
- if (starget && (!ev->hidden_raid_component)){
+ if (!starget) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
+ break;
+ }
- vtarget = starget->hostdata;
+ vtarget = starget->hostdata;
+ if (!vtarget) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
+ break;
+ }
- if (!vtarget) {
+ mpt_findImVolumes(ioc);
+
+ starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Hidding: "
+ "fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+ ioc->name, hot_plug_info->channel, hot_plug_info->id,
+ hot_plug_info->phys_disk_num, (unsigned long long)
+ sas_device.sas_address);
+
+ vtarget->id = hot_plug_info->phys_disk_num;
+ vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
+ phy_info->attached.phys_disk_num = hot_plug_info->phys_disk_num;
+ mptsas_reprobe_target(starget, 1);
+ break;
+
+ case MPTSAS_DEL_PHYSDISK_REPROBE:
+
+ if (mptsas_sas_device_pg0(ioc, &sas_device,
+ (MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID <<
+ MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
+ (hot_plug_info->channel << 8) + hot_plug_info->id)) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- break;
- }
- /*
- * Handling RAID components
- */
- if (vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
- printk(MYIOC_s_INFO_FMT
- "RAID Exposing: channel=%d, id=%d, "
- "physdsk %d \n", ioc->name, ev->channel,
- ev->id, ev->phys_disk_num);
- vtarget->tflags &=
- ~MPT_TARGET_FLAGS_RAID_COMPONENT;
- vtarget->id = ev->id;
- mptsas_reprobe_target(starget, 0);
- phy_info->attached.phys_disk_num = ~0;
- }
+ "%s: fw_id=%d exit at line=%d\n",
+ ioc->name, __func__,
+ hot_plug_info->id, __LINE__));
break;
}
- if (mptsas_get_rphy(phy_info)) {
+ phy_info = mptsas_find_phyinfo_by_sas_address(ioc,
+ sas_device.sas_address);
+ if (!phy_info) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- if (ev->channel) printk("%d\n", __LINE__);
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
break;
}
- port = mptsas_get_port(phy_info);
- if (!port) {
+ starget = mptsas_get_starget(phy_info);
+ if (!starget) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
break;
}
- memcpy(&phy_info->attached, &sas_device,
- sizeof(struct mptsas_devinfo));
- if (phy_info->attached.device_info &
- MPI_SAS_DEVICE_INFO_SSP_TARGET)
- ds = "ssp";
- if (phy_info->attached.device_info &
- MPI_SAS_DEVICE_INFO_STP_TARGET)
- ds = "stp";
- if (phy_info->attached.device_info &
- MPI_SAS_DEVICE_INFO_SATA_DEVICE)
- ds = "sata";
-
- printk(MYIOC_s_INFO_FMT
- "attaching %s device, channel %d, id %d, phy %d\n",
- ioc->name, ds, ev->channel, ev->id, ev->phy_id);
-
- mptsas_parse_device_info(&identify, &phy_info->attached);
- rphy = sas_end_device_alloc(port);
- if (!rphy) {
+ vtarget = starget->hostdata;
+ if (!vtarget) {
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- break; /* non-fatal: an rphy can be added later */
- }
-
- rphy->identify = identify;
- if (sas_rphy_add(rphy)) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
- "%s: exit at line=%d\n", ioc->name,
- __func__, __LINE__));
- sas_rphy_free(rphy);
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
break;
}
- mptsas_set_rphy(ioc, phy_info, rphy);
+
+ if (!(vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)) {
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "%s: fw_id=%d exit at line=%d\n", ioc->name,
+ __func__, hot_plug_info->id, __LINE__));
+ break;
+ }
+
+ mpt_findImVolumes(ioc);
+
+ starget_printk(KERN_INFO, starget, MYIOC_s_FMT "RAID Exposing:"
+ " fw_channel=%d, fw_id=%d, physdsk %d, sas_addr 0x%llx\n",
+ ioc->name, hot_plug_info->channel, hot_plug_info->id,
+ hot_plug_info->phys_disk_num, (unsigned long long)
+ sas_device.sas_address);
+
+ vtarget->tflags &= ~MPT_TARGET_FLAGS_RAID_COMPONENT;
+ vtarget->id = hot_plug_info->id;
+ phy_info->attached.phys_disk_num = ~0;
+ mptsas_reprobe_target(starget, 0);
+ mptsas_add_device_component_by_fw(ioc,
+ hot_plug_info->channel, hot_plug_info->id);
break;
+
case MPTSAS_ADD_RAID:
- sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
- ev->id, 0);
- if (sdev) {
- scsi_device_put(sdev);
- break;
- }
- printk(MYIOC_s_INFO_FMT
- "attaching raid volume, channel %d, id %d\n",
- ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
- scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL, ev->id, 0);
+
mpt_findImVolumes(ioc);
+ printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
+ "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+ hot_plug_info->id);
+ scsi_add_device(ioc->sh, MPTSAS_RAID_CHANNEL,
+ hot_plug_info->id, 0);
break;
+
case MPTSAS_DEL_RAID:
- sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
- ev->id, 0);
- if (!sdev)
- break;
- printk(MYIOC_s_INFO_FMT
- "removing raid volume, channel %d, id %d\n",
- ioc->name, MPTSAS_RAID_CHANNEL, ev->id);
- vdevice = sdev->hostdata;
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
+
mpt_findImVolumes(ioc);
+ printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+ "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL,
+ hot_plug_info->id);
+ scsi_remove_device(hot_plug_info->sdev);
+ scsi_device_put(hot_plug_info->sdev);
break;
+
case MPTSAS_ADD_INACTIVE_VOLUME:
+
+ mpt_findImVolumes(ioc);
mptsas_adding_inactive_raid_components(ioc,
- ev->channel, ev->id);
+ hot_plug_info->channel, hot_plug_info->id);
break;
- case MPTSAS_IGNORE_EVENT:
+
default:
break;
}
- mutex_unlock(&ioc->sas_discovery_mutex);
- kfree(ev);
+ mptsas_free_fw_event(ioc, fw_event);
}
static void
-mptsas_send_sas_event(MPT_ADAPTER *ioc,
- EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data)
+mptsas_send_sas_event(struct fw_event_work *fw_event)
{
- struct mptsas_hotplug_event *ev;
- u32 device_info = le32_to_cpu(sas_event_data->DeviceInfo);
- __le64 sas_address;
+ MPT_ADAPTER *ioc;
+ struct mptsas_hotplug_event hot_plug_info;
+ EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data;
+ u32 device_info;
+ u64 sas_address;
+
+ ioc = fw_event->ioc;
+ sas_event_data = (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)
+ fw_event->event_data;
+ device_info = le32_to_cpu(sas_event_data->DeviceInfo);
if ((device_info &
- (MPI_SAS_DEVICE_INFO_SSP_TARGET |
- MPI_SAS_DEVICE_INFO_STP_TARGET |
- MPI_SAS_DEVICE_INFO_SATA_DEVICE )) == 0)
+ (MPI_SAS_DEVICE_INFO_SSP_TARGET |
+ MPI_SAS_DEVICE_INFO_STP_TARGET |
+ MPI_SAS_DEVICE_INFO_SATA_DEVICE)) == 0) {
+ mptsas_free_fw_event(ioc, fw_event);
return;
+ }
+
+ if (sas_event_data->ReasonCode ==
+ MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED) {
+ mptbase_sas_persist_operation(ioc,
+ MPI_SAS_OP_CLEAR_NOT_PRESENT);
+ mptsas_free_fw_event(ioc, fw_event);
+ return;
+ }
switch (sas_event_data->ReasonCode) {
case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
-
- mptsas_target_reset_queue(ioc, sas_event_data);
- break;
-
case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
- ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev) {
- printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
- break;
- }
-
- INIT_WORK(&ev->work, mptsas_hotplug_work);
- ev->ioc = ioc;
- ev->handle = le16_to_cpu(sas_event_data->DevHandle);
- ev->parent_handle =
- le16_to_cpu(sas_event_data->ParentDevHandle);
- ev->channel = sas_event_data->Bus;
- ev->id = sas_event_data->TargetID;
- ev->phy_id = sas_event_data->PhyNum;
+ memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+ hot_plug_info.handle = le16_to_cpu(sas_event_data->DevHandle);
+ hot_plug_info.channel = sas_event_data->Bus;
+ hot_plug_info.id = sas_event_data->TargetID;
+ hot_plug_info.phy_id = sas_event_data->PhyNum;
memcpy(&sas_address, &sas_event_data->SASAddress,
- sizeof(__le64));
- ev->sas_address = le64_to_cpu(sas_address);
- ev->device_info = device_info;
-
+ sizeof(u64));
+ hot_plug_info.sas_address = le64_to_cpu(sas_address);
+ hot_plug_info.device_info = device_info;
if (sas_event_data->ReasonCode &
MPI_EVENT_SAS_DEV_STAT_RC_ADDED)
- ev->event_type = MPTSAS_ADD_DEVICE;
+ hot_plug_info.event_type = MPTSAS_ADD_DEVICE;
else
- ev->event_type = MPTSAS_DEL_DEVICE;
- schedule_work(&ev->work);
+ hot_plug_info.event_type = MPTSAS_DEL_DEVICE;
+ mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
break;
+
case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
- /*
- * Persistent table is full.
- */
- INIT_WORK(&ioc->sas_persist_task,
- mptsas_persist_clear_table);
- schedule_work(&ioc->sas_persist_task);
+ mptbase_sas_persist_operation(ioc,
+ MPI_SAS_OP_CLEAR_NOT_PRESENT);
+ mptsas_free_fw_event(ioc, fw_event);
break;
- /*
- * TODO, handle other events
- */
+
case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
- case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
+ /* TODO */
case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
- case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
- case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
- case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
- case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
+ /* TODO */
default:
+ mptsas_free_fw_event(ioc, fw_event);
break;
}
}
+
static void
-mptsas_send_raid_event(MPT_ADAPTER *ioc,
- EVENT_DATA_RAID *raid_event_data)
+mptsas_send_raid_event(struct fw_event_work *fw_event)
{
- struct mptsas_hotplug_event *ev;
- int status = le32_to_cpu(raid_event_data->SettingsStatus);
- int state = (status >> 8) & 0xff;
+ MPT_ADAPTER *ioc;
+ EVENT_DATA_RAID *raid_event_data;
+ struct mptsas_hotplug_event hot_plug_info;
+ int status;
+ int state;
+ struct scsi_device *sdev = NULL;
+ VirtDevice *vdevice = NULL;
+ RaidPhysDiskPage0_t phys_disk;
- if (ioc->bus_type != SAS)
- return;
+ ioc = fw_event->ioc;
+ raid_event_data = (EVENT_DATA_RAID *)fw_event->event_data;
+ status = le32_to_cpu(raid_event_data->SettingsStatus);
+ state = (status >> 8) & 0xff;
- ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev) {
- printk(MYIOC_s_WARN_FMT "lost hotplug event\n", ioc->name);
- return;
+ memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+ hot_plug_info.id = raid_event_data->VolumeID;
+ hot_plug_info.channel = raid_event_data->VolumeBus;
+ hot_plug_info.phys_disk_num = raid_event_data->PhysDiskNum;
+
+ if (raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_DELETED ||
+ raid_event_data->ReasonCode == MPI_EVENT_RAID_RC_VOLUME_CREATED ||
+ raid_event_data->ReasonCode ==
+ MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED) {
+ sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL,
+ hot_plug_info.id, 0);
+ hot_plug_info.sdev = sdev;
+ if (sdev)
+ vdevice = sdev->hostdata;
}
- INIT_WORK(&ev->work, mptsas_hotplug_work);
- ev->ioc = ioc;
- ev->id = raid_event_data->VolumeID;
- ev->channel = raid_event_data->VolumeBus;
- ev->event_type = MPTSAS_IGNORE_EVENT;
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+ "ReasonCode=%02x\n", ioc->name, __func__,
+ raid_event_data->ReasonCode));
switch (raid_event_data->ReasonCode) {
case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
- ev->phys_disk_num_valid = 1;
- ev->phys_disk_num = raid_event_data->PhysDiskNum;
- ev->event_type = MPTSAS_ADD_DEVICE;
+ hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK_REPROBE;
break;
case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
- ev->phys_disk_num_valid = 1;
- ev->phys_disk_num = raid_event_data->PhysDiskNum;
- ev->hidden_raid_component = 1;
- ev->event_type = MPTSAS_DEL_DEVICE;
+ hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK_REPROBE;
break;
case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
switch (state) {
case MPI_PD_STATE_ONLINE:
case MPI_PD_STATE_NOT_COMPATIBLE:
- ev->phys_disk_num_valid = 1;
- ev->phys_disk_num = raid_event_data->PhysDiskNum;
- ev->hidden_raid_component = 1;
- ev->event_type = MPTSAS_ADD_DEVICE;
+ mpt_raid_phys_disk_pg0(ioc,
+ raid_event_data->PhysDiskNum, &phys_disk);
+ hot_plug_info.id = phys_disk.PhysDiskID;
+ hot_plug_info.channel = phys_disk.PhysDiskBus;
+ hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
break;
+ case MPI_PD_STATE_FAILED:
case MPI_PD_STATE_MISSING:
case MPI_PD_STATE_OFFLINE_AT_HOST_REQUEST:
case MPI_PD_STATE_FAILED_AT_HOST_REQUEST:
case MPI_PD_STATE_OFFLINE_FOR_ANOTHER_REASON:
- ev->phys_disk_num_valid = 1;
- ev->phys_disk_num = raid_event_data->PhysDiskNum;
- ev->event_type = MPTSAS_DEL_DEVICE;
+ hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
break;
default:
break;
}
break;
case MPI_EVENT_RAID_RC_VOLUME_DELETED:
- ev->event_type = MPTSAS_DEL_RAID;
+ if (!sdev)
+ break;
+ vdevice->vtarget->deleted = 1; /* block IO */
+ hot_plug_info.event_type = MPTSAS_DEL_RAID;
break;
case MPI_EVENT_RAID_RC_VOLUME_CREATED:
- ev->event_type = MPTSAS_ADD_RAID;
+ if (sdev) {
+ scsi_device_put(sdev);
+ break;
+ }
+ hot_plug_info.event_type = MPTSAS_ADD_RAID;
break;
case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
+ if (!(status & MPI_RAIDVOL0_STATUS_FLAG_ENABLED)) {
+ if (!sdev)
+ break;
+ vdevice->vtarget->deleted = 1; /* block IO */
+ hot_plug_info.event_type = MPTSAS_DEL_RAID;
+ break;
+ }
switch (state) {
case MPI_RAIDVOL0_STATUS_STATE_FAILED:
case MPI_RAIDVOL0_STATUS_STATE_MISSING:
- ev->event_type = MPTSAS_DEL_RAID;
+ if (!sdev)
+ break;
+ vdevice->vtarget->deleted = 1; /* block IO */
+ hot_plug_info.event_type = MPTSAS_DEL_RAID;
break;
case MPI_RAIDVOL0_STATUS_STATE_OPTIMAL:
case MPI_RAIDVOL0_STATUS_STATE_DEGRADED:
- ev->event_type = MPTSAS_ADD_RAID;
+ if (sdev) {
+ scsi_device_put(sdev);
+ break;
+ }
+ hot_plug_info.event_type = MPTSAS_ADD_RAID;
break;
default:
break;
@@ -3001,32 +4335,188 @@
default:
break;
}
- schedule_work(&ev->work);
+
+ if (hot_plug_info.event_type != MPTSAS_IGNORE_EVENT)
+ mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+ else
+ mptsas_free_fw_event(ioc, fw_event);
}
-static void
-mptsas_send_discovery_event(MPT_ADAPTER *ioc,
- EVENT_DATA_SAS_DISCOVERY *discovery_data)
+/**
+ * mptsas_issue_tm - send mptsas internal tm request
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @type: Task Management type
+ * @channel: channel number for task management
+ * @id: Logical Target ID for reset (if appropriate)
+ * @lun: Logical unit for reset (if appropriate)
+ * @task_context: Context for the task to be aborted
+ * @timeout: timeout for task management control
+ *
+ * return 0 on success and -1 on failure:
+ *
+ */
+static int
+mptsas_issue_tm(MPT_ADAPTER *ioc, u8 type, u8 channel, u8 id, u64 lun,
+ int task_context, ulong timeout, u8 *issue_reset)
{
- struct mptsas_discovery_event *ev;
+ MPT_FRAME_HDR *mf;
+ SCSITaskMgmt_t *pScsiTm;
+ int retval;
+ unsigned long timeleft;
- /*
- * DiscoveryStatus
- *
- * This flag will be non-zero when firmware
- * kicks off discovery, and return to zero
- * once its completed.
- */
- if (discovery_data->DiscoveryStatus)
- return;
+ *issue_reset = 0;
+ mf = mpt_get_msg_frame(mptsasDeviceResetCtx, ioc);
+ if (mf == NULL) {
+ retval = -1; /* return failure */
+ dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no "
+ "msg frames!!\n", ioc->name));
+ goto out;
+ }
- ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev)
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, "
+ "task_type = 0x%02X,\n\t timeout = %ld, fw_channel = %d, "
+ "fw_id = %d, lun = %lld,\n\t task_context = 0x%x\n", ioc->name, mf,
+ type, timeout, channel, id, (unsigned long long)lun,
+ task_context));
+
+ pScsiTm = (SCSITaskMgmt_t *) mf;
+ memset(pScsiTm, 0, sizeof(SCSITaskMgmt_t));
+ pScsiTm->Function = MPI_FUNCTION_SCSI_TASK_MGMT;
+ pScsiTm->TaskType = type;
+ pScsiTm->MsgFlags = 0;
+ pScsiTm->TargetID = id;
+ pScsiTm->Bus = channel;
+ pScsiTm->ChainOffset = 0;
+ pScsiTm->Reserved = 0;
+ pScsiTm->Reserved1 = 0;
+ pScsiTm->TaskMsgContext = task_context;
+ int_to_scsilun(lun, (struct scsi_lun *)pScsiTm->LUN);
+
+ INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+ retval = 0;
+ mpt_put_msg_frame_hi_pri(mptsasDeviceResetCtx, ioc, mf);
+
+ /* Now wait for the command to complete */
+ timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+ timeout*HZ);
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ retval = -1; /* return failure */
+ dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt request: TIMED OUT!(mr=%p)\n", ioc->name, mf));
+ mpt_free_msg_frame(ioc, mf);
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ *issue_reset = 1;
+ goto out;
+ }
+
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ retval = -1; /* return failure */
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt request: failed with no reply\n", ioc->name));
+ goto out;
+ }
+
+ out:
+ CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ return retval;
+}
+
+/**
+ * mptsas_broadcast_primative_work - Handle broadcast primitives
+ * @work: work queue payload containing info describing the event
+ *
+ * this will be handled in workqueue context.
+ */
+static void
+mptsas_broadcast_primative_work(struct fw_event_work *fw_event)
+{
+ MPT_ADAPTER *ioc = fw_event->ioc;
+ MPT_FRAME_HDR *mf;
+ VirtDevice *vdevice;
+ int ii;
+ struct scsi_cmnd *sc;
+ SCSITaskMgmtReply_t *pScsiTmReply;
+ u8 issue_reset;
+ int task_context;
+ u8 channel, id;
+ int lun;
+ u32 termination_count;
+ u32 query_count;
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s - enter\n", ioc->name, __func__));
+
+ mutex_lock(&ioc->taskmgmt_cmds.mutex);
+ if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+ mptsas_requeue_fw_event(ioc, fw_event, 1000);
return;
- INIT_WORK(&ev->work, mptsas_discovery_work);
- ev->ioc = ioc;
- schedule_work(&ev->work);
-};
+ }
+
+ issue_reset = 0;
+ termination_count = 0;
+ query_count = 0;
+ mpt_findImVolumes(ioc);
+ pScsiTmReply = (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply;
+
+ for (ii = 0; ii < ioc->req_depth; ii++) {
+ if (ioc->fw_events_off)
+ goto out;
+ sc = mptscsih_get_scsi_lookup(ioc, ii);
+ if (!sc)
+ continue;
+ mf = MPT_INDEX_2_MFPTR(ioc, ii);
+ if (!mf)
+ continue;
+ task_context = mf->u.frame.hwhdr.msgctxu.MsgContext;
+ vdevice = sc->device->hostdata;
+ if (!vdevice || !vdevice->vtarget)
+ continue;
+ if (vdevice->vtarget->tflags & MPT_TARGET_FLAGS_RAID_COMPONENT)
+ continue; /* skip hidden raid components */
+ if (vdevice->vtarget->raidVolume)
+ continue; /* skip hidden raid components */
+ channel = vdevice->vtarget->channel;
+ id = vdevice->vtarget->id;
+ lun = vdevice->lun;
+ if (mptsas_issue_tm(ioc, MPI_SCSITASKMGMT_TASKTYPE_QUERY_TASK,
+ channel, id, (u64)lun, task_context, 30, &issue_reset))
+ goto out;
+ query_count++;
+ termination_count +=
+ le32_to_cpu(pScsiTmReply->TerminationCount);
+ if ((pScsiTmReply->IOCStatus == MPI_IOCSTATUS_SUCCESS) &&
+ (pScsiTmReply->ResponseCode ==
+ MPI_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
+ pScsiTmReply->ResponseCode ==
+ MPI_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC))
+ continue;
+ if (mptsas_issue_tm(ioc,
+ MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET,
+ channel, id, (u64)lun, 0, 30, &issue_reset))
+ goto out;
+ termination_count +=
+ le32_to_cpu(pScsiTmReply->TerminationCount);
+ }
+
+ out:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s - exit, query_count = %d termination_count = %d\n",
+ ioc->name, __func__, query_count, termination_count));
+
+ ioc->broadcast_aen_busy = 0;
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
+
+ if (issue_reset) {
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ }
+ mptsas_free_fw_event(ioc, fw_event);
+}
/*
* mptsas_send_ir2_event - handle exposing hidden disk when
@@ -3037,76 +4527,159 @@
*
*/
static void
-mptsas_send_ir2_event(MPT_ADAPTER *ioc, PTR_MPI_EVENT_DATA_IR2 ir2_data)
+mptsas_send_ir2_event(struct fw_event_work *fw_event)
{
- struct mptsas_hotplug_event *ev;
+ MPT_ADAPTER *ioc;
+ struct mptsas_hotplug_event hot_plug_info;
+ MPI_EVENT_DATA_IR2 *ir2_data;
+ u8 reasonCode;
+ RaidPhysDiskPage0_t phys_disk;
- if (ir2_data->ReasonCode !=
- MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED)
+ ioc = fw_event->ioc;
+ ir2_data = (MPI_EVENT_DATA_IR2 *)fw_event->event_data;
+ reasonCode = ir2_data->ReasonCode;
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
+ "ReasonCode=%02x\n", ioc->name, __func__, reasonCode));
+
+ memset(&hot_plug_info, 0, sizeof(struct mptsas_hotplug_event));
+ hot_plug_info.id = ir2_data->TargetID;
+ hot_plug_info.channel = ir2_data->Bus;
+ switch (reasonCode) {
+ case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
+ hot_plug_info.event_type = MPTSAS_ADD_INACTIVE_VOLUME;
+ break;
+ case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
+ hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+ hot_plug_info.event_type = MPTSAS_DEL_PHYSDISK;
+ break;
+ case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
+ hot_plug_info.phys_disk_num = ir2_data->PhysDiskNum;
+ mpt_raid_phys_disk_pg0(ioc,
+ ir2_data->PhysDiskNum, &phys_disk);
+ hot_plug_info.id = phys_disk.PhysDiskID;
+ hot_plug_info.event_type = MPTSAS_ADD_PHYSDISK;
+ break;
+ default:
+ mptsas_free_fw_event(ioc, fw_event);
return;
-
- ev = kzalloc(sizeof(*ev), GFP_ATOMIC);
- if (!ev)
- return;
-
- INIT_WORK(&ev->work, mptsas_hotplug_work);
- ev->ioc = ioc;
- ev->id = ir2_data->TargetID;
- ev->channel = ir2_data->Bus;
- ev->event_type = MPTSAS_ADD_INACTIVE_VOLUME;
-
- schedule_work(&ev->work);
-};
+ }
+ mptsas_hotplug_work(ioc, fw_event, &hot_plug_info);
+}
static int
mptsas_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *reply)
{
- int rc=1;
- u8 event = le32_to_cpu(reply->Event) & 0xFF;
+ u32 event = le32_to_cpu(reply->Event);
+ int sz, event_data_sz;
+ struct fw_event_work *fw_event;
+ unsigned long delay;
- if (!ioc->sh)
- goto out;
+ /* events turned off due to host reset or driver unloading */
+ if (ioc->fw_events_off)
+ return 0;
- /*
- * sas_discovery_ignore_events
- *
- * This flag is to prevent anymore processing of
- * sas events once mptsas_remove function is called.
- */
- if (ioc->sas_discovery_ignore_events) {
- rc = mptscsih_event_process(ioc, reply);
- goto out;
- }
-
+ delay = msecs_to_jiffies(1);
switch (event) {
+ case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
+ {
+ EVENT_DATA_SAS_BROADCAST_PRIMITIVE *broadcast_event_data =
+ (EVENT_DATA_SAS_BROADCAST_PRIMITIVE *)reply->Data;
+ if (broadcast_event_data->Primitive !=
+ MPI_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
+ return 0;
+ if (ioc->broadcast_aen_busy)
+ return 0;
+ ioc->broadcast_aen_busy = 1;
+ break;
+ }
case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
- mptsas_send_sas_event(ioc,
- (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data);
+ {
+ EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *sas_event_data =
+ (EVENT_DATA_SAS_DEVICE_STATUS_CHANGE *)reply->Data;
+
+ if (sas_event_data->ReasonCode ==
+ MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING) {
+ mptsas_target_reset_queue(ioc, sas_event_data);
+ return 0;
+ }
break;
+ }
+ case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
+ {
+ MpiEventDataSasExpanderStatusChange_t *expander_data =
+ (MpiEventDataSasExpanderStatusChange_t *)reply->Data;
+
+ if (ioc->old_sas_discovery_protocal)
+ return 0;
+
+ if (expander_data->ReasonCode ==
+ MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING &&
+ ioc->device_missing_delay)
+ delay = HZ * ioc->device_missing_delay;
+ break;
+ }
+ case MPI_EVENT_SAS_DISCOVERY:
+ {
+ u32 discovery_status;
+ EventDataSasDiscovery_t *discovery_data =
+ (EventDataSasDiscovery_t *)reply->Data;
+
+ discovery_status = le32_to_cpu(discovery_data->DiscoveryStatus);
+ ioc->sas_discovery_quiesce_io = discovery_status ? 1 : 0;
+ if (ioc->old_sas_discovery_protocal && !discovery_status)
+ mptsas_queue_rescan(ioc);
+ return 0;
+ }
case MPI_EVENT_INTEGRATED_RAID:
- mptsas_send_raid_event(ioc,
- (EVENT_DATA_RAID *)reply->Data);
- break;
case MPI_EVENT_PERSISTENT_TABLE_FULL:
- INIT_WORK(&ioc->sas_persist_task,
- mptsas_persist_clear_table);
- schedule_work(&ioc->sas_persist_task);
- break;
- case MPI_EVENT_SAS_DISCOVERY:
- mptsas_send_discovery_event(ioc,
- (EVENT_DATA_SAS_DISCOVERY *)reply->Data);
- break;
case MPI_EVENT_IR2:
- mptsas_send_ir2_event(ioc,
- (PTR_MPI_EVENT_DATA_IR2)reply->Data);
+ case MPI_EVENT_SAS_PHY_LINK_STATUS:
+ case MPI_EVENT_QUEUE_FULL:
break;
default:
- rc = mptscsih_event_process(ioc, reply);
- break;
+ return 0;
}
- out:
- return rc;
+ event_data_sz = ((reply->MsgLength * 4) -
+ offsetof(EventNotificationReply_t, Data));
+ sz = offsetof(struct fw_event_work, event_data) + event_data_sz;
+ fw_event = kzalloc(sz, GFP_ATOMIC);
+ if (!fw_event) {
+ printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name,
+ __func__, __LINE__);
+ return 0;
+ }
+ memcpy(fw_event->event_data, reply->Data, event_data_sz);
+ fw_event->event = event;
+ fw_event->ioc = ioc;
+ mptsas_add_fw_event(ioc, fw_event, delay);
+ return 0;
+}
+
+/* Delete a volume when no longer listed in ioc pg2
+ */
+static void mptsas_volume_delete(MPT_ADAPTER *ioc, u8 id)
+{
+ struct scsi_device *sdev;
+ int i;
+
+ sdev = scsi_device_lookup(ioc->sh, MPTSAS_RAID_CHANNEL, id, 0);
+ if (!sdev)
+ return;
+ if (!ioc->raid_data.pIocPg2)
+ goto out;
+ if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
+ goto out;
+ for (i = 0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++)
+ if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id)
+ goto release_sdev;
+ out:
+ printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
+ "id %d\n", ioc->name, MPTSAS_RAID_CHANNEL, id);
+ scsi_remove_device(sdev);
+ release_sdev:
+ scsi_device_put(sdev);
}
static int
@@ -3128,6 +4701,7 @@
return r;
ioc = pci_get_drvdata(pdev);
+ mptsas_fw_event_off(ioc);
ioc->DoneCtx = mptsasDoneCtx;
ioc->TaskCtx = mptsasTaskCtx;
ioc->InternalCtx = mptsasInternalCtx;
@@ -3211,17 +4785,15 @@
* A slightly different algorithm is required for
* 64bit SGEs.
*/
- scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
- if (sizeof(dma_addr_t) == sizeof(u64)) {
+ scale = ioc->req_sz/ioc->SGE_size;
+ if (ioc->sg_addr_size == sizeof(u64)) {
numSGE = (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 60) / ioc->SGE_size;
} else {
numSGE = 1 + (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 64) / ioc->SGE_size;
}
if (numSGE < sh->sg_tablesize) {
@@ -3251,9 +4823,6 @@
/* Clear the TM flags
*/
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- hd->resetPending = 0;
hd->abortSCpnt = NULL;
/* Clear the pointer used to store
@@ -3273,10 +4842,11 @@
ioc->sas_data.ptClear = mpt_pt_clear;
- init_waitqueue_head(&hd->scandv_waitq);
- hd->scandv_wait_done = 0;
hd->last_queue_full = 0;
INIT_LIST_HEAD(&hd->target_reset_list);
+ INIT_LIST_HEAD(&ioc->sas_device_info_list);
+ mutex_init(&ioc->sas_device_info_mutex);
+
spin_unlock_irqrestore(&ioc->FreeQlock, flags);
if (ioc->sas_data.ptClear==1) {
@@ -3291,8 +4861,11 @@
goto out_mptsas_probe;
}
+ /* older firmware doesn't support expander events */
+ if ((ioc->facts.HeaderVersion >> 8) < 0xE)
+ ioc->old_sas_discovery_protocal = 1;
mptsas_scan_sas_topology(ioc);
-
+ mptsas_fw_event_on(ioc);
return 0;
out_mptsas_probe:
@@ -3301,12 +4874,25 @@
return error;
}
+void
+mptsas_shutdown(struct pci_dev *pdev)
+{
+ MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
+
+ mptsas_fw_event_off(ioc);
+ mptsas_cleanup_fw_event_q(ioc);
+}
+
static void __devexit mptsas_remove(struct pci_dev *pdev)
{
MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
struct mptsas_portinfo *p, *n;
int i;
+ mptsas_shutdown(pdev);
+
+ mptsas_del_device_components(ioc);
+
ioc->sas_discovery_ignore_events = 1;
sas_remove_host(ioc->sh);
@@ -3315,11 +4901,12 @@
list_del(&p->list);
for (i = 0 ; i < p->num_phys ; i++)
mptsas_port_delete(ioc, p->phy_info[i].port_details);
+
kfree(p->phy_info);
kfree(p);
}
mutex_unlock(&ioc->sas_topology_mutex);
-
+ ioc->hba_port_info = NULL;
mptscsih_remove(pdev);
}
@@ -3344,7 +4931,7 @@
.id_table = mptsas_pci_table,
.probe = mptsas_probe,
.remove = __devexit_p(mptsas_remove),
- .shutdown = mptscsih_shutdown,
+ .shutdown = mptsas_shutdown,
#ifdef CONFIG_PM
.suspend = mptscsih_suspend,
.resume = mptscsih_resume,
@@ -3364,10 +4951,12 @@
return -ENODEV;
mptsasDoneCtx = mpt_register(mptscsih_io_done, MPTSAS_DRIVER);
- mptsasTaskCtx = mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
+ mptsasTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSAS_DRIVER);
mptsasInternalCtx =
mpt_register(mptscsih_scandv_complete, MPTSAS_DRIVER);
mptsasMgmtCtx = mpt_register(mptsas_mgmt_done, MPTSAS_DRIVER);
+ mptsasDeviceResetCtx =
+ mpt_register(mptsas_taskmgmt_complete, MPTSAS_DRIVER);
mpt_event_register(mptsasDoneCtx, mptsas_event_process);
mpt_reset_register(mptsasDoneCtx, mptsas_ioc_reset);
@@ -3392,6 +4981,7 @@
mpt_deregister(mptsasInternalCtx);
mpt_deregister(mptsasTaskCtx);
mpt_deregister(mptsasDoneCtx);
+ mpt_deregister(mptsasDeviceResetCtx);
}
module_init(mptsas_init);
diff --git a/drivers/message/fusion/mptsas.h b/drivers/message/fusion/mptsas.h
index 2b544e0..953c2bf 100644
--- a/drivers/message/fusion/mptsas.h
+++ b/drivers/message/fusion/mptsas.h
@@ -53,6 +53,7 @@
struct list_head list;
EVENT_DATA_SAS_DEVICE_STATUS_CHANGE sas_event_data;
u8 target_reset_issued;
+ unsigned long time_count;
};
enum mptsas_hotplug_action {
@@ -60,12 +61,37 @@
MPTSAS_DEL_DEVICE,
MPTSAS_ADD_RAID,
MPTSAS_DEL_RAID,
+ MPTSAS_ADD_PHYSDISK,
+ MPTSAS_ADD_PHYSDISK_REPROBE,
+ MPTSAS_DEL_PHYSDISK,
+ MPTSAS_DEL_PHYSDISK_REPROBE,
MPTSAS_ADD_INACTIVE_VOLUME,
MPTSAS_IGNORE_EVENT,
};
+struct mptsas_mapping{
+ u8 id;
+ u8 channel;
+};
+
+struct mptsas_device_info {
+ struct list_head list;
+ struct mptsas_mapping os; /* operating system mapping*/
+ struct mptsas_mapping fw; /* firmware mapping */
+ u64 sas_address;
+ u32 device_info; /* specific bits for devices */
+ u16 slot; /* enclosure slot id */
+ u64 enclosure_logical_id; /*enclosure address */
+ u8 is_logical_volume; /* is this logical volume */
+ /* this belongs to volume */
+ u8 is_hidden_raid_component;
+ /* this valid when is_hidden_raid_component set */
+ u8 volume_id;
+ /* cached data for a removed device */
+ u8 is_cached;
+};
+
struct mptsas_hotplug_event {
- struct work_struct work;
MPT_ADAPTER *ioc;
enum mptsas_hotplug_action event_type;
u64 sas_address;
@@ -73,11 +99,18 @@
u8 id;
u32 device_info;
u16 handle;
- u16 parent_handle;
u8 phy_id;
- u8 phys_disk_num_valid; /* hrc (hidden raid component) */
u8 phys_disk_num; /* hrc - unique index*/
- u8 hidden_raid_component; /* hrc - don't expose*/
+ struct scsi_device *sdev;
+};
+
+struct fw_event_work {
+ struct list_head list;
+ struct delayed_work work;
+ MPT_ADAPTER *ioc;
+ u32 event;
+ u8 retries;
+ u8 event_data[1];
};
struct mptsas_discovery_event {
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index e62c6bc..024e830 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -80,7 +80,7 @@
/*
* Other private/forward protos...
*/
-static struct scsi_cmnd * mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
static struct scsi_cmnd * mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i);
static void mptscsih_set_scsi_lookup(MPT_ADAPTER *ioc, int i, struct scsi_cmnd *scmd);
static int SCPNT_TO_LOOKUP_IDX(MPT_ADAPTER *ioc, struct scsi_cmnd *scmd);
@@ -92,18 +92,24 @@
SCSIIORequest_t *pReq, int req_idx);
static void mptscsih_freeChainBuffers(MPT_ADAPTER *ioc, int req_idx);
static void mptscsih_copy_sense_data(struct scsi_cmnd *sc, MPT_SCSI_HOST *hd, MPT_FRAME_HDR *mf, SCSIIOReply_t *pScsiReply);
-static int mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd);
-static int mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout );
-static int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
+int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id,
+ int lun, int ctx2abort, ulong timeout);
int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
+void
+mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
+static int mptscsih_get_completion_code(MPT_ADAPTER *ioc,
+ MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply);
int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd);
static void mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, VirtDevice *vdevice);
+static int
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+ SCSITaskMgmtReply_t *pScsiTmReply);
void mptscsih_remove(struct pci_dev *);
void mptscsih_shutdown(struct pci_dev *);
#ifdef CONFIG_PM
@@ -113,69 +119,6 @@
#define SNS_LEN(scp) SCSI_SENSE_BUFFERSIZE
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_add_sge - Place a simple SGE at address pAddr.
- * @pAddr: virtual address for SGE
- * @flagslength: SGE flags and data transfer length
- * @dma_addr: Physical address
- *
- * This routine places a MPT request frame back on the MPT adapter's
- * FreeQ.
- */
-static inline void
-mptscsih_add_sge(char *pAddr, u32 flagslength, dma_addr_t dma_addr)
-{
- if (sizeof(dma_addr_t) == sizeof(u64)) {
- SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
- u32 tmp = dma_addr & 0xFFFFFFFF;
-
- pSge->FlagsLength = cpu_to_le32(flagslength);
- pSge->Address.Low = cpu_to_le32(tmp);
- tmp = (u32) ((u64)dma_addr >> 32);
- pSge->Address.High = cpu_to_le32(tmp);
-
- } else {
- SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
- pSge->FlagsLength = cpu_to_le32(flagslength);
- pSge->Address = cpu_to_le32(dma_addr);
- }
-} /* mptscsih_add_sge() */
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_add_chain - Place a chain SGE at address pAddr.
- * @pAddr: virtual address for SGE
- * @next: nextChainOffset value (u32's)
- * @length: length of next SGL segment
- * @dma_addr: Physical address
- *
- * This routine places a MPT request frame back on the MPT adapter's
- * FreeQ.
- */
-static inline void
-mptscsih_add_chain(char *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
-{
- if (sizeof(dma_addr_t) == sizeof(u64)) {
- SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
- u32 tmp = dma_addr & 0xFFFFFFFF;
-
- pChain->Length = cpu_to_le16(length);
- pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
-
- pChain->NextChainOffset = next;
-
- pChain->Address.Low = cpu_to_le32(tmp);
- tmp = (u32) ((u64)dma_addr >> 32);
- pChain->Address.High = cpu_to_le32(tmp);
- } else {
- SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
- pChain->Length = cpu_to_le16(length);
- pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT | mpt_addr_size();
- pChain->NextChainOffset = next;
- pChain->Address = cpu_to_le32(dma_addr);
- }
-} /* mptscsih_add_chain() */
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/*
@@ -281,10 +224,10 @@
*/
nextSGEset:
- numSgeSlots = ((frm_sz - sgeOffset) / (sizeof(u32) + sizeof(dma_addr_t)) );
+ numSgeSlots = ((frm_sz - sgeOffset) / ioc->SGE_size);
numSgeThisFrame = (sges_left < numSgeSlots) ? sges_left : numSgeSlots;
- sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | MPT_SGE_FLAGS_ADDRESSING | sgdir;
+ sgflags = MPT_SGE_FLAGS_SIMPLE_ELEMENT | sgdir;
/* Get first (num - 1) SG elements
* Skip any SG entries with a length of 0
@@ -293,17 +236,19 @@
for (ii=0; ii < (numSgeThisFrame-1); ii++) {
thisxfer = sg_dma_len(sg);
if (thisxfer == 0) {
- sg = sg_next(sg); /* Get next SG element from the OS */
+ /* Get next SG element from the OS */
+ sg = sg_next(sg);
sg_done++;
continue;
}
v2 = sg_dma_address(sg);
- mptscsih_add_sge(psge, sgflags | thisxfer, v2);
+ ioc->add_sge(psge, sgflags | thisxfer, v2);
- sg = sg_next(sg); /* Get next SG element from the OS */
- psge += (sizeof(u32) + sizeof(dma_addr_t));
- sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+ /* Get next SG element from the OS */
+ sg = sg_next(sg);
+ psge += ioc->SGE_size;
+ sgeOffset += ioc->SGE_size;
sg_done++;
}
@@ -320,12 +265,8 @@
thisxfer = sg_dma_len(sg);
v2 = sg_dma_address(sg);
- mptscsih_add_sge(psge, sgflags | thisxfer, v2);
- /*
- sg = sg_next(sg);
- psge += (sizeof(u32) + sizeof(dma_addr_t));
- */
- sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
+ ioc->add_sge(psge, sgflags | thisxfer, v2);
+ sgeOffset += ioc->SGE_size;
sg_done++;
if (chainSge) {
@@ -334,7 +275,8 @@
* Update the chain element
* Offset and Length fields.
*/
- mptscsih_add_chain((char *)chainSge, 0, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+ ioc->add_chain((char *)chainSge, 0, sgeOffset,
+ ioc->ChainBufferDMA + chain_dma_off);
} else {
/* The current buffer is the original MF
* and there is no Chain buffer.
@@ -367,7 +309,7 @@
* set properly).
*/
if (sg_done) {
- u32 *ptmp = (u32 *) (psge - (sizeof(u32) + sizeof(dma_addr_t)));
+ u32 *ptmp = (u32 *) (psge - ioc->SGE_size);
sgflags = le32_to_cpu(*ptmp);
sgflags |= MPT_SGE_FLAGS_LAST_ELEMENT;
*ptmp = cpu_to_le32(sgflags);
@@ -381,8 +323,9 @@
* Old chain element is now complete.
*/
u8 nextChain = (u8) (sgeOffset >> 2);
- sgeOffset += (sizeof(u32) + sizeof(dma_addr_t));
- mptscsih_add_chain((char *)chainSge, nextChain, sgeOffset, ioc->ChainBufferDMA + chain_dma_off);
+ sgeOffset += ioc->SGE_size;
+ ioc->add_chain((char *)chainSge, nextChain, sgeOffset,
+ ioc->ChainBufferDMA + chain_dma_off);
} else {
/* The original MF buffer requires a chain buffer -
* set the offset.
@@ -592,14 +535,15 @@
}
scsi_print_command(sc);
- printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d\n",
- ioc->name, pScsiReply->Bus, pScsiReply->TargetID);
+ printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %d\n",
+ ioc->name, pScsiReply->Bus, pScsiReply->TargetID, sc->device->lun);
printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
"resid = %d\n", ioc->name, scsi_bufflen(sc), sc->underflow,
scsi_get_resid(sc));
printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
"sc->result = %08X\n", ioc->name, le16_to_cpu(pScsiReply->TaskTag),
le32_to_cpu(pScsiReply->TransferCount), sc->result);
+
printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
"scsi_status = %s (0x%02x), scsi_state = (0x%02x)\n",
ioc->name, desc, ioc_status, desc1, pScsiReply->SCSIStatus,
@@ -654,16 +598,14 @@
req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
req_idx_MR = (mr != NULL) ?
le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx) : req_idx;
+
+ /* Special case, where already freed message frame is received from
+ * Firmware. It happens with Resetting IOC.
+ * Return immediately. Do not care
+ */
if ((req_idx != req_idx_MR) ||
- (mf->u.frame.linkage.arg1 == 0xdeadbeaf)) {
- printk(MYIOC_s_ERR_FMT "Received a mf that was already freed\n",
- ioc->name);
- printk (MYIOC_s_ERR_FMT
- "req_idx=%x req_idx_MR=%x mf=%p mr=%p sc=%p\n",
- ioc->name, req_idx, req_idx_MR, mf, mr,
- mptscsih_get_scsi_lookup(ioc, req_idx_MR));
+ (le32_to_cpu(mf->u.frame.linkage.arg1) == 0xdeadbeaf))
return 0;
- }
sc = mptscsih_getclear_scsi_lookup(ioc, req_idx);
if (sc == NULL) {
@@ -810,12 +752,16 @@
*/
case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
- case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
/* Linux handles an unsolicited DID_RESET better
* than an unsolicited DID_ABORT.
*/
sc->result = DID_RESET << 16;
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ if (ioc->bus_type == FC)
+ sc->result = DID_ERROR << 16;
+ else
+ sc->result = DID_RESET << 16;
break;
case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
@@ -992,9 +938,9 @@
scsi_dma_unmap(sc);
sc->result = DID_RESET << 16;
sc->host_scribble = NULL;
- sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
- "completing cmds: fw_channel %d, fw_id %d, sc=%p,"
- " mf = %p, idx=%x\n", ioc->name, channel, id, sc, mf, ii);
+ dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT
+ "completing cmds: fw_channel %d, fw_id %d, sc=%p, mf = %p, "
+ "idx=%x\n", ioc->name, channel, id, sc, mf, ii));
sc->scsi_done(sc);
}
}
@@ -1053,9 +999,11 @@
scsi_dma_unmap(sc);
sc->host_scribble = NULL;
sc->result = DID_NO_CONNECT << 16;
- sdev_printk(KERN_INFO, sc->device, MYIOC_s_FMT "completing cmds: fw_channel %d,"
- "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name, vdevice->vtarget->channel,
- vdevice->vtarget->id, sc, mf, ii);
+ dtmprintk(ioc, sdev_printk(KERN_INFO, sc->device,
+ MYIOC_s_FMT "completing cmds: fw_channel %d, "
+ "fw_id %d, sc=%p, mf = %p, idx=%x\n", ioc->name,
+ vdevice->vtarget->channel, vdevice->vtarget->id,
+ sc, mf, ii));
sc->scsi_done(sc);
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
}
@@ -1346,7 +1294,6 @@
MPT_FRAME_HDR *mf;
SCSIIORequest_t *pScsiReq;
VirtDevice *vdevice = SCpnt->device->hostdata;
- int lun;
u32 datalen;
u32 scsictl;
u32 scsidir;
@@ -1357,13 +1304,12 @@
hd = shost_priv(SCpnt->device->host);
ioc = hd->ioc;
- lun = SCpnt->device->lun;
SCpnt->scsi_done = done;
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p, done()=%p\n",
ioc->name, SCpnt, done));
- if (hd->resetPending) {
+ if (ioc->taskmgmt_quiesce_io) {
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "qcmd: SCpnt=%p timeout + 60HZ\n",
ioc->name, SCpnt));
return SCSI_MLQUEUE_HOST_BUSY;
@@ -1422,7 +1368,7 @@
pScsiReq->CDBLength = SCpnt->cmd_len;
pScsiReq->SenseBufferLength = MPT_SENSE_BUFFER_SIZE;
pScsiReq->Reserved = 0;
- pScsiReq->MsgFlags = mpt_msg_flags();
+ pScsiReq->MsgFlags = mpt_msg_flags(ioc);
int_to_scsilun(SCpnt->device->lun, (struct scsi_lun *)pScsiReq->LUN);
pScsiReq->Control = cpu_to_le32(scsictl);
@@ -1448,7 +1394,8 @@
*/
if (datalen == 0) {
/* Add a NULL SGE */
- mptscsih_add_sge((char *)&pScsiReq->SGL, MPT_SGE_FLAGS_SSIMPLE_READ | 0,
+ ioc->add_sge((char *)&pScsiReq->SGL,
+ MPT_SGE_FLAGS_SSIMPLE_READ | 0,
(dma_addr_t) -1);
} else {
/* Add a 32 or 64 bit SGE */
@@ -1528,120 +1475,6 @@
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
- * mptscsih_TMHandler - Generic handler for SCSI Task Management.
- * @hd: Pointer to MPT SCSI HOST structure
- * @type: Task Management type
- * @channel: channel number for task management
- * @id: Logical Target ID for reset (if appropriate)
- * @lun: Logical Unit for reset (if appropriate)
- * @ctx2abort: Context for the task to be aborted (if appropriate)
- * @timeout: timeout for task management control
- *
- * Fall through to mpt_HardResetHandler if: not operational, too many
- * failed TM requests or handshake failure.
- *
- * Remark: Currently invoked from a non-interrupt thread (_bh).
- *
- * Note: With old EH code, at most 1 SCSI TaskMgmt function per IOC
- * will be active.
- *
- * Returns 0 for SUCCESS, or %FAILED.
- **/
-int
-mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
-{
- MPT_ADAPTER *ioc;
- int rc = -1;
- u32 ioc_raw_state;
- unsigned long flags;
-
- ioc = hd->ioc;
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler Entered!\n", ioc->name));
-
- // SJR - CHECKME - Can we avoid this here?
- // (mpt_HardResetHandler has this check...)
- spin_lock_irqsave(&ioc->diagLock, flags);
- if ((ioc->diagPending) || (ioc->alt_ioc && ioc->alt_ioc->diagPending)) {
- spin_unlock_irqrestore(&ioc->diagLock, flags);
- return FAILED;
- }
- spin_unlock_irqrestore(&ioc->diagLock, flags);
-
- /* Wait a fixed amount of time for the TM pending flag to be cleared.
- * If we time out and not bus reset, then we return a FAILED status
- * to the caller.
- * The call to mptscsih_tm_pending_wait() will set the pending flag
- * if we are
- * successful. Otherwise, reload the FW.
- */
- if (mptscsih_tm_pending_wait(hd) == FAILED) {
- if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler abort: "
- "Timed out waiting for last TM (%d) to complete! \n",
- ioc->name, hd->tmPending));
- return FAILED;
- } else if (type == MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler target "
- "reset: Timed out waiting for last TM (%d) "
- "to complete! \n", ioc->name,
- hd->tmPending));
- return FAILED;
- } else if (type == MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TMHandler bus reset: "
- "Timed out waiting for last TM (%d) to complete! \n",
- ioc->name, hd->tmPending));
- return FAILED;
- }
- } else {
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- hd->tmPending |= (1 << type);
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- }
-
- ioc_raw_state = mpt_GetIocState(ioc, 0);
-
- if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
- printk(MYIOC_s_WARN_FMT
- "TM Handler for type=%x: IOC Not operational (0x%x)!\n",
- ioc->name, type, ioc_raw_state);
- printk(MYIOC_s_WARN_FMT " Issuing HardReset!!\n", ioc->name);
- if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
- printk(MYIOC_s_WARN_FMT "TMHandler: HardReset "
- "FAILED!!\n", ioc->name);
- return FAILED;
- }
-
- if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
- printk(MYIOC_s_WARN_FMT
- "TM Handler for type=%x: ioc_state: "
- "DOORBELL_ACTIVE (0x%x)!\n",
- ioc->name, type, ioc_raw_state);
- return FAILED;
- }
-
- /* Isse the Task Mgmt request.
- */
- if (hd->hard_resets < -1)
- hd->hard_resets++;
-
- rc = mptscsih_IssueTaskMgmt(hd, type, channel, id, lun,
- ctx2abort, timeout);
- if (rc)
- printk(MYIOC_s_INFO_FMT "Issue of TaskMgmt failed!\n",
- ioc->name);
- else
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issue of TaskMgmt Successful!\n",
- ioc->name));
-
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "TMHandler rc = %d!\n", ioc->name, rc));
-
- return rc;
-}
-
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
* mptscsih_IssueTaskMgmt - Generic send Task Management function.
* @hd: Pointer to MPT_SCSI_HOST structure
* @type: Task Management type
@@ -1659,23 +1492,60 @@
* Returns 0 for SUCCESS, or FAILED.
*
**/
-static int
-mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout)
+int
+mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun,
+ int ctx2abort, ulong timeout)
{
MPT_FRAME_HDR *mf;
SCSITaskMgmt_t *pScsiTm;
int ii;
int retval;
MPT_ADAPTER *ioc = hd->ioc;
+ unsigned long timeleft;
+ u8 issue_hard_reset;
+ u32 ioc_raw_state;
+ unsigned long time_count;
+
+ issue_hard_reset = 0;
+ ioc_raw_state = mpt_GetIocState(ioc, 0);
+
+ if ((ioc_raw_state & MPI_IOC_STATE_MASK) != MPI_IOC_STATE_OPERATIONAL) {
+ printk(MYIOC_s_WARN_FMT
+ "TaskMgmt type=%x: IOC Not operational (0x%x)!\n",
+ ioc->name, type, ioc_raw_state);
+ printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
+ ioc->name, __func__);
+ if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0)
+ printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
+ "FAILED!!\n", ioc->name);
+ return 0;
+ }
+
+ if (ioc_raw_state & MPI_DOORBELL_ACTIVE) {
+ printk(MYIOC_s_WARN_FMT
+ "TaskMgmt type=%x: ioc_state: "
+ "DOORBELL_ACTIVE (0x%x)!\n",
+ ioc->name, type, ioc_raw_state);
+ return FAILED;
+ }
+
+ mutex_lock(&ioc->taskmgmt_cmds.mutex);
+ if (mpt_set_taskmgmt_in_progress_flag(ioc) != 0) {
+ mf = NULL;
+ retval = FAILED;
+ goto out;
+ }
/* Return Fail to calling function if no message frames available.
*/
if ((mf = mpt_get_msg_frame(ioc->TaskCtx, ioc)) == NULL) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "IssueTaskMgmt, no msg frames!!\n",
- ioc->name));
- return FAILED;
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt no msg frames!!\n", ioc->name));
+ retval = FAILED;
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ goto out;
}
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt request @ %p\n",
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
ioc->name, mf));
/* Format the Request
@@ -1699,11 +1569,14 @@
pScsiTm->TaskMsgContext = ctx2abort;
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IssueTaskMgmt: ctx2abort (0x%08x) "
- "type=%d\n", ioc->name, ctx2abort, type));
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
+ "task_type = 0x%02X, timeout = %ld\n", ioc->name, ctx2abort,
+ type, timeout));
DBG_DUMP_TM_REQUEST_FRAME(ioc, (u32 *)pScsiTm);
+ INITIALIZE_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ time_count = jiffies;
if ((ioc->facts.IOCCapabilities & MPI_IOCFACTS_CAPABILITY_HIGH_PRI_Q) &&
(ioc->facts.MsgVersion >= MPI_VERSION_01_05))
mpt_put_msg_frame_hi_pri(ioc->TaskCtx, ioc, mf);
@@ -1711,47 +1584,50 @@
retval = mpt_send_handshake_request(ioc->TaskCtx, ioc,
sizeof(SCSITaskMgmt_t), (u32*)pScsiTm, CAN_SLEEP);
if (retval) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "send_handshake FAILED!"
- " (hd %p, ioc %p, mf %p, rc=%d) \n", ioc->name, hd,
- ioc, mf, retval));
- goto fail_out;
+ dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt handshake FAILED!(mf=%p, rc=%d) \n",
+ ioc->name, mf, retval));
+ mpt_free_msg_frame(ioc, mf);
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ goto out;
}
}
- if(mptscsih_tm_wait_for_completion(hd, timeout) == FAILED) {
- dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "task management request TIMED OUT!"
- " (hd %p, ioc %p, mf %p) \n", ioc->name, hd,
- ioc, mf));
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling HardReset! \n",
- ioc->name));
- retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rc=%d \n",
- ioc->name, retval));
- goto fail_out;
+ timeleft = wait_for_completion_timeout(&ioc->taskmgmt_cmds.done,
+ timeout*HZ);
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ retval = FAILED;
+ dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
+ "TaskMgmt TIMED OUT!(mf=%p)\n", ioc->name, mf));
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ issue_hard_reset = 1;
+ goto out;
}
- /*
- * Handle success case, see if theres a non-zero ioc_status.
- */
- if (hd->tm_iocstatus == MPI_IOCSTATUS_SUCCESS ||
- hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
- hd->tm_iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
- retval = 0;
- else
- retval = FAILED;
+ retval = mptscsih_taskmgmt_reply(ioc, type,
+ (SCSITaskMgmtReply_t *) ioc->taskmgmt_cmds.reply);
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt completed (%d seconds)\n",
+ ioc->name, jiffies_to_msecs(jiffies - time_count)/1000));
+
+ out:
+
+ CLEAR_MGMT_STATUS(ioc->taskmgmt_cmds.status)
+ if (issue_hard_reset) {
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ }
+
+ retval = (retval == 0) ? 0 : FAILED;
+ mutex_unlock(&ioc->taskmgmt_cmds.mutex);
return retval;
-
- fail_out:
-
- /*
- * Free task management mf, and corresponding tm flags
- */
- mpt_free_msg_frame(ioc, mf);
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- return FAILED;
}
+EXPORT_SYMBOL(mptscsih_IssueTaskMgmt);
static int
mptscsih_get_tm_timeout(MPT_ADAPTER *ioc)
@@ -1838,13 +1714,8 @@
goto out;
}
- if (hd->resetPending) {
- retval = FAILED;
- goto out;
- }
-
- if (hd->timeouts < -1)
- hd->timeouts++;
+ if (ioc->timeouts < -1)
+ ioc->timeouts++;
if (mpt_fwfault_debug)
mpt_halt_firmware(ioc);
@@ -1861,22 +1732,30 @@
hd->abortSCpnt = SCpnt;
- retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
- vdevice->vtarget->channel, vdevice->vtarget->id, vdevice->lun,
- ctx2abort, mptscsih_get_tm_timeout(ioc));
+ retval = mptscsih_IssueTaskMgmt(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK,
+ vdevice->vtarget->channel,
+ vdevice->vtarget->id, vdevice->lun,
+ ctx2abort, mptscsih_get_tm_timeout(ioc));
if (SCPNT_TO_LOOKUP_IDX(ioc, SCpnt) == scpnt_idx &&
- SCpnt->serial_number == sn)
+ SCpnt->serial_number == sn) {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "task abort: command still in active list! (sc=%p)\n",
+ ioc->name, SCpnt));
retval = FAILED;
+ } else {
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "task abort: command cleared from active list! (sc=%p)\n",
+ ioc->name, SCpnt));
+ retval = SUCCESS;
+ }
out:
printk(MYIOC_s_INFO_FMT "task abort: %s (sc=%p)\n",
- ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+ ioc->name, ((retval == SUCCESS) ? "SUCCESS" : "FAILED"), SCpnt);
- if (retval == 0)
- return SUCCESS;
- else
- return FAILED;
+ return retval;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -1909,14 +1788,9 @@
ioc->name, SCpnt);
scsi_print_command(SCpnt);
- if (hd->resetPending) {
- retval = FAILED;
- goto out;
- }
-
vdevice = SCpnt->device->hostdata;
if (!vdevice || !vdevice->vtarget) {
- retval = 0;
+ retval = SUCCESS;
goto out;
}
@@ -1927,9 +1801,11 @@
goto out;
}
- retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
- vdevice->vtarget->channel, vdevice->vtarget->id, 0, 0,
- mptscsih_get_tm_timeout(ioc));
+ retval = mptscsih_IssueTaskMgmt(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET,
+ vdevice->vtarget->channel,
+ vdevice->vtarget->id, 0, 0,
+ mptscsih_get_tm_timeout(ioc));
out:
printk (MYIOC_s_INFO_FMT "target reset: %s (sc=%p)\n",
@@ -1972,12 +1848,16 @@
ioc->name, SCpnt);
scsi_print_command(SCpnt);
- if (hd->timeouts < -1)
- hd->timeouts++;
+ if (ioc->timeouts < -1)
+ ioc->timeouts++;
vdevice = SCpnt->device->hostdata;
- retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
- vdevice->vtarget->channel, 0, 0, 0, mptscsih_get_tm_timeout(ioc));
+ if (!vdevice || !vdevice->vtarget)
+ return SUCCESS;
+ retval = mptscsih_IssueTaskMgmt(hd,
+ MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
+ vdevice->vtarget->channel, 0, 0, 0,
+ mptscsih_get_tm_timeout(ioc));
printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
@@ -2001,8 +1881,9 @@
mptscsih_host_reset(struct scsi_cmnd *SCpnt)
{
MPT_SCSI_HOST * hd;
- int retval;
+ int status = SUCCESS;
MPT_ADAPTER *ioc;
+ int retval;
/* If we can't locate the host to reset, then we failed. */
if ((hd = shost_priv(SCpnt->device->host)) == NULL){
@@ -2021,86 +1902,71 @@
/* If our attempts to reset the host failed, then return a failed
* status. The host will be taken off line by the SCSI mid-layer.
*/
- if (mpt_HardResetHandler(ioc, CAN_SLEEP) < 0) {
- retval = FAILED;
- } else {
- /* Make sure TM pending is cleared and TM state is set to
- * NONE.
- */
- retval = 0;
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- }
+ retval = mpt_HardResetHandler(ioc, CAN_SLEEP);
+ if (retval < 0)
+ status = FAILED;
+ else
+ status = SUCCESS;
printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
ioc->name, ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt);
+ return status;
+}
+
+static int
+mptscsih_taskmgmt_reply(MPT_ADAPTER *ioc, u8 type,
+ SCSITaskMgmtReply_t *pScsiTmReply)
+{
+ u16 iocstatus;
+ u32 termination_count;
+ int retval;
+
+ if (!(ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
+ retval = FAILED;
+ goto out;
+ }
+
+ DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
+
+ iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
+
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt fw_channel = %d, fw_id = %d, task_type = 0x%02X,\n"
+ "\tiocstatus = 0x%04X, loginfo = 0x%08X, response_code = 0x%02X,\n"
+ "\tterm_cmnds = %d\n", ioc->name, pScsiTmReply->Bus,
+ pScsiTmReply->TargetID, type, le16_to_cpu(pScsiTmReply->IOCStatus),
+ le32_to_cpu(pScsiTmReply->IOCLogInfo), pScsiTmReply->ResponseCode,
+ termination_count));
+
+ if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
+ pScsiTmReply->ResponseCode)
+ mptscsih_taskmgmt_response_code(ioc,
+ pScsiTmReply->ResponseCode);
+
+ if (iocstatus == MPI_IOCSTATUS_SUCCESS) {
+ retval = 0;
+ goto out;
+ }
+
+ retval = FAILED;
+ if (type == MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
+ if (termination_count == 1)
+ retval = 0;
+ goto out;
+ }
+
+ if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_TERMINATED ||
+ iocstatus == MPI_IOCSTATUS_SCSI_IOC_TERMINATED)
+ retval = 0;
+
+ out:
return retval;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_tm_pending_wait - wait for pending task management request to complete
- * @hd: Pointer to MPT host structure.
- *
- * Returns {SUCCESS,FAILED}.
- */
-static int
-mptscsih_tm_pending_wait(MPT_SCSI_HOST * hd)
-{
- unsigned long flags;
- int loop_count = 4 * 10; /* Wait 10 seconds */
- int status = FAILED;
- MPT_ADAPTER *ioc = hd->ioc;
-
- do {
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- if (hd->tmState == TM_STATE_NONE) {
- hd->tmState = TM_STATE_IN_PROGRESS;
- hd->tmPending = 1;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- status = SUCCESS;
- break;
- }
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- msleep(250);
- } while (--loop_count);
-
- return status;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-/**
- * mptscsih_tm_wait_for_completion - wait for completion of TM task
- * @hd: Pointer to MPT host structure.
- * @timeout: timeout value
- *
- * Returns {SUCCESS,FAILED}.
- */
-static int
-mptscsih_tm_wait_for_completion(MPT_SCSI_HOST * hd, ulong timeout )
-{
- unsigned long flags;
- int loop_count = 4 * timeout;
- int status = FAILED;
- MPT_ADAPTER *ioc = hd->ioc;
-
- do {
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- if(hd->tmPending == 0) {
- status = SUCCESS;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- break;
- }
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- msleep(250);
- } while (--loop_count);
-
- return status;
-}
-
-/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
-static void
+void
mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code)
{
char *desc;
@@ -2134,6 +2000,7 @@
printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
ioc->name, response_code, desc);
}
+EXPORT_SYMBOL(mptscsih_taskmgmt_response_code);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
@@ -2150,97 +2017,28 @@
* Returns 1 indicating alloc'd request frame ptr should be freed.
**/
int
-mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_taskmgmt_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf,
+ MPT_FRAME_HDR *mr)
{
- SCSITaskMgmtReply_t *pScsiTmReply;
- SCSITaskMgmt_t *pScsiTmReq;
- MPT_SCSI_HOST *hd;
- unsigned long flags;
- u16 iocstatus;
- u8 tmType;
- u32 termination_count;
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "TaskMgmt completed (mf=%p, mr=%p)\n", ioc->name, mf, mr));
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed (mf=%p,mr=%p)\n",
- ioc->name, mf, mr));
- if (!ioc->sh) {
- dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
- "TaskMgmt Complete: NULL Scsi Host Ptr\n", ioc->name));
- return 1;
- }
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
- if (mr == NULL) {
- dtmprintk(ioc, printk(MYIOC_s_WARN_FMT
- "ERROR! TaskMgmt Reply: NULL Request %p\n", ioc->name, mf));
- return 1;
- }
-
- hd = shost_priv(ioc->sh);
- pScsiTmReply = (SCSITaskMgmtReply_t*)mr;
- pScsiTmReq = (SCSITaskMgmt_t*)mf;
- tmType = pScsiTmReq->TaskType;
- iocstatus = le16_to_cpu(pScsiTmReply->IOCStatus) & MPI_IOCSTATUS_MASK;
- termination_count = le32_to_cpu(pScsiTmReply->TerminationCount);
-
- if (ioc->facts.MsgVersion >= MPI_VERSION_01_05 &&
- pScsiTmReply->ResponseCode)
- mptscsih_taskmgmt_response_code(ioc,
- pScsiTmReply->ResponseCode);
- DBG_DUMP_TM_REPLY_FRAME(ioc, (u32 *)pScsiTmReply);
-
-#ifdef CONFIG_FUSION_LOGGING
- if ((ioc->debug_level & MPT_DEBUG_REPLY) ||
- (ioc->debug_level & MPT_DEBUG_TM ))
- printk("%s: ha=%d [%d:%d:0] task_type=0x%02X "
- "iocstatus=0x%04X\n\tloginfo=0x%08X response_code=0x%02X "
- "term_cmnds=%d\n", __func__, ioc->id, pScsiTmReply->Bus,
- pScsiTmReply->TargetID, pScsiTmReq->TaskType,
- le16_to_cpu(pScsiTmReply->IOCStatus),
- le32_to_cpu(pScsiTmReply->IOCLogInfo),pScsiTmReply->ResponseCode,
- le32_to_cpu(pScsiTmReply->TerminationCount));
-#endif
- if (!iocstatus) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT " TaskMgmt SUCCESS\n", ioc->name));
- hd->abortSCpnt = NULL;
+ if (!mr)
goto out;
- }
- /* Error? (anything non-zero?) */
-
- /* clear flags and continue.
- */
- switch (tmType) {
-
- case MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
- if (termination_count == 1)
- iocstatus = MPI_IOCSTATUS_SCSI_TASK_TERMINATED;
- hd->abortSCpnt = NULL;
- break;
-
- case MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS:
-
- /* If an internal command is present
- * or the TM failed - reload the FW.
- * FC FW may respond FAILED to an ABORT
- */
- if (iocstatus == MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED ||
- hd->cmdPtr)
- if (mpt_HardResetHandler(ioc, NO_SLEEP) < 0)
- printk(MYIOC_s_WARN_FMT " Firmware Reload FAILED!!\n", ioc->name);
- break;
-
- case MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
- default:
- break;
- }
-
+ ioc->taskmgmt_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->taskmgmt_cmds.reply, mr,
+ min(MPT_DEFAULT_FRAME_SIZE, 4 * mr->u.reply.MsgLength));
out:
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- hd->tm_iocstatus = iocstatus;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
-
- return 1;
+ if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ mpt_clear_taskmgmt_in_progress_flag(ioc);
+ ioc->taskmgmt_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->taskmgmt_cmds.done);
+ return 1;
+ }
+ return 0;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -2290,8 +2088,10 @@
mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
struct inactive_raid_component_info *component_info;
- int i;
+ int i, j;
+ RaidPhysDiskPage1_t *phys_disk;
int rc = 0;
+ int num_paths;
if (!ioc->raid_data.pIocPg3)
goto out;
@@ -2303,6 +2103,45 @@
}
}
+ if (ioc->bus_type != SAS)
+ goto out;
+
+ /*
+ * Check if dual path
+ */
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+ if (num_paths < 2)
+ continue;
+ phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+ (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+ if (!phys_disk)
+ continue;
+ if ((mpt_raid_phys_disk_pg1(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+ phys_disk))) {
+ kfree(phys_disk);
+ continue;
+ }
+ for (j = 0; j < num_paths; j++) {
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_INVALID))
+ continue;
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+ continue;
+ if ((id == phys_disk->Path[j].PhysDiskID) &&
+ (channel == phys_disk->Path[j].PhysDiskBus)) {
+ rc = 1;
+ kfree(phys_disk);
+ goto out;
+ }
+ }
+ kfree(phys_disk);
+ }
+
+
/*
* Check inactive list for matching phys disks
*/
@@ -2327,8 +2166,10 @@
mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id)
{
struct inactive_raid_component_info *component_info;
- int i;
+ int i, j;
+ RaidPhysDiskPage1_t *phys_disk;
int rc = -ENXIO;
+ int num_paths;
if (!ioc->raid_data.pIocPg3)
goto out;
@@ -2340,6 +2181,44 @@
}
}
+ if (ioc->bus_type != SAS)
+ goto out;
+
+ /*
+ * Check if dual path
+ */
+ for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) {
+ num_paths = mpt_raid_phys_disk_get_num_paths(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum);
+ if (num_paths < 2)
+ continue;
+ phys_disk = kzalloc(offsetof(RaidPhysDiskPage1_t, Path) +
+ (num_paths * sizeof(RAID_PHYS_DISK1_PATH)), GFP_KERNEL);
+ if (!phys_disk)
+ continue;
+ if ((mpt_raid_phys_disk_pg1(ioc,
+ ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskNum,
+ phys_disk))) {
+ kfree(phys_disk);
+ continue;
+ }
+ for (j = 0; j < num_paths; j++) {
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_INVALID))
+ continue;
+ if ((phys_disk->Path[j].Flags &
+ MPI_RAID_PHYSDISK1_FLAG_BROKEN))
+ continue;
+ if ((id == phys_disk->Path[j].PhysDiskID) &&
+ (channel == phys_disk->Path[j].PhysDiskBus)) {
+ rc = phys_disk->PhysDiskNum;
+ kfree(phys_disk);
+ goto out;
+ }
+ }
+ kfree(phys_disk);
+ }
+
/*
* Check inactive list for matching phys disks
*/
@@ -2457,7 +2336,6 @@
sdev->ppr, sdev->inquiry_len));
vdevice->configured_lun = 1;
- mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"Queue depth=%d, tflags=%x\n",
@@ -2469,6 +2347,7 @@
ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
+ mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"tagged %d, simple %d, ordered %d\n",
ioc->name,sdev->tagged_supported, sdev->simple_tags,
@@ -2542,15 +2421,13 @@
}
/**
- * mptscsih_get_scsi_lookup
+ * mptscsih_get_scsi_lookup - retrieves scmd entry
* @ioc: Pointer to MPT_ADAPTER structure
* @i: index into the array
*
- * retrieves scmd entry from ScsiLookup[] array list
- *
* Returns the scsi_cmd pointer
- **/
-static struct scsi_cmnd *
+ */
+struct scsi_cmnd *
mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i)
{
unsigned long flags;
@@ -2562,15 +2439,15 @@
return scmd;
}
+EXPORT_SYMBOL(mptscsih_get_scsi_lookup);
/**
- * mptscsih_getclear_scsi_lookup
+ * mptscsih_getclear_scsi_lookup - retrieves and clears scmd entry from ScsiLookup[] array list
* @ioc: Pointer to MPT_ADAPTER structure
* @i: index into the array
*
- * retrieves and clears scmd entry from ScsiLookup[] array list
- *
* Returns the scsi_cmd pointer
+ *
**/
static struct scsi_cmnd *
mptscsih_getclear_scsi_lookup(MPT_ADAPTER *ioc, int i)
@@ -2635,94 +2512,33 @@
mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
{
MPT_SCSI_HOST *hd;
- unsigned long flags;
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- ": IOC %s_reset routed to SCSI host driver!\n",
- ioc->name, reset_phase==MPT_IOC_SETUP_RESET ? "setup" : (
- reset_phase==MPT_IOC_PRE_RESET ? "pre" : "post")));
-
- /* If a FW reload request arrives after base installed but
- * before all scsi hosts have been attached, then an alt_ioc
- * may have a NULL sh pointer.
- */
if (ioc->sh == NULL || shost_priv(ioc->sh) == NULL)
return 0;
- else
- hd = shost_priv(ioc->sh);
- if (reset_phase == MPT_IOC_SETUP_RESET) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Setup-Diag Reset\n", ioc->name));
-
- /* Clean Up:
- * 1. Set Hard Reset Pending Flag
- * All new commands go to doneQ
- */
- hd->resetPending = 1;
-
- } else if (reset_phase == MPT_IOC_PRE_RESET) {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Diag Reset\n", ioc->name));
-
- /* 2. Flush running commands
- * Clean ScsiLookup (and associated memory)
- * AND clean mytaskQ
- */
-
- /* 2b. Reply to OS all known outstanding I/O commands.
- */
+ hd = shost_priv(ioc->sh);
+ switch (reset_phase) {
+ case MPT_IOC_SETUP_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
+ break;
+ case MPT_IOC_PRE_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
mptscsih_flush_running_cmds(hd);
-
- /* 2c. If there was an internal command that
- * has not completed, configuration or io request,
- * free these resources.
- */
- if (hd->cmdPtr) {
- del_timer(&hd->timer);
- mpt_free_msg_frame(ioc, hd->cmdPtr);
+ break;
+ case MPT_IOC_POST_RESET:
+ dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
+ if (ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING) {
+ ioc->internal_cmds.status |=
+ MPT_MGMT_STATUS_DID_IOCRESET;
+ complete(&ioc->internal_cmds.done);
}
-
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Pre-Reset complete.\n", ioc->name));
-
- } else {
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Diag Reset\n", ioc->name));
-
- /* Once a FW reload begins, all new OS commands are
- * redirected to the doneQ w/ a reset status.
- * Init all control structures.
- */
-
- /* 2. Chain Buffer initialization
- */
-
- /* 4. Renegotiate to all devices, if SPI
- */
-
- /* 5. Enable new commands to be posted
- */
- spin_lock_irqsave(&ioc->FreeQlock, flags);
- hd->tmPending = 0;
- spin_unlock_irqrestore(&ioc->FreeQlock, flags);
- hd->resetPending = 0;
- hd->tmState = TM_STATE_NONE;
-
- /* 6. If there was an internal command,
- * wake this process up.
- */
- if (hd->cmdPtr) {
- /*
- * Wake up the original calling thread
- */
- hd->pLocal = &hd->localReply;
- hd->pLocal->completion = MPT_SCANDV_DID_RESET;
- hd->scandv_wait_done = 1;
- wake_up(&hd->scandv_waitq);
- hd->cmdPtr = NULL;
- }
-
- dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Post-Reset complete.\n", ioc->name));
-
+ break;
+ default:
+ break;
}
-
return 1; /* currently means nothing really */
}
@@ -2730,55 +2546,16 @@
int
mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
{
- MPT_SCSI_HOST *hd;
u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
- devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
- ioc->name, event));
+ devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "MPT event (=%02Xh) routed to SCSI host driver!\n",
+ ioc->name, event));
- if (ioc->sh == NULL ||
- ((hd = shost_priv(ioc->sh)) == NULL))
- return 1;
-
- switch (event) {
- case MPI_EVENT_UNIT_ATTENTION: /* 03 */
- /* FIXME! */
- break;
- case MPI_EVENT_IOC_BUS_RESET: /* 04 */
- case MPI_EVENT_EXT_BUS_RESET: /* 05 */
- if (hd && (ioc->bus_type == SPI) && (hd->soft_resets < -1))
- hd->soft_resets++;
- break;
- case MPI_EVENT_LOGOUT: /* 09 */
- /* FIXME! */
- break;
-
- case MPI_EVENT_RESCAN: /* 06 */
- break;
-
- /*
- * CHECKME! Don't think we need to do
- * anything for these, but...
- */
- case MPI_EVENT_LINK_STATUS_CHANGE: /* 07 */
- case MPI_EVENT_LOOP_STATE_CHANGE: /* 08 */
- /*
- * CHECKME! Falling thru...
- */
- break;
-
- case MPI_EVENT_INTEGRATED_RAID: /* 0B */
- break;
-
- case MPI_EVENT_NONE: /* 00 */
- case MPI_EVENT_LOG_DATA: /* 01 */
- case MPI_EVENT_STATE_CHANGE: /* 02 */
- case MPI_EVENT_EVENT_CHANGE: /* 0A */
- default:
- dprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": Ignoring event (=%02Xh)\n",
- ioc->name, event));
- break;
- }
+ if ((event == MPI_EVENT_IOC_BUS_RESET ||
+ event == MPI_EVENT_EXT_BUS_RESET) &&
+ (ioc->bus_type == SPI) && (ioc->soft_resets < -1))
+ ioc->soft_resets++;
return 1; /* currently means nothing really */
}
@@ -2809,153 +2586,44 @@
* Used ONLY for DV and other internal commands.
*/
int
-mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr)
+mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+ MPT_FRAME_HDR *reply)
{
- MPT_SCSI_HOST *hd;
SCSIIORequest_t *pReq;
- int completionCode;
+ SCSIIOReply_t *pReply;
+ u8 cmd;
u16 req_idx;
+ u8 *sense_data;
+ int sz;
- hd = shost_priv(ioc->sh);
+ ioc->internal_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
+ ioc->internal_cmds.completion_code = MPT_SCANDV_GOOD;
+ if (!reply)
+ goto out;
- if ((mf == NULL) ||
- (mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth))) {
- printk(MYIOC_s_ERR_FMT
- "ScanDvComplete, %s req frame ptr! (=%p)\n",
- ioc->name, mf?"BAD":"NULL", (void *) mf);
- goto wakeup;
+ pReply = (SCSIIOReply_t *) reply;
+ pReq = (SCSIIORequest_t *) req;
+ ioc->internal_cmds.completion_code =
+ mptscsih_get_completion_code(ioc, req, reply);
+ ioc->internal_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
+ memcpy(ioc->internal_cmds.reply, reply,
+ min(MPT_DEFAULT_FRAME_SIZE, 4 * reply->u.reply.MsgLength));
+ cmd = reply->u.hdr.Function;
+ if (((cmd == MPI_FUNCTION_SCSI_IO_REQUEST) ||
+ (cmd == MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) &&
+ (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)) {
+ req_idx = le16_to_cpu(req->u.frame.hwhdr.msgctxu.fld.req_idx);
+ sense_data = ((u8 *)ioc->sense_buf_pool +
+ (req_idx * MPT_SENSE_BUFFER_ALLOC));
+ sz = min_t(int, pReq->SenseBufferLength,
+ MPT_SENSE_BUFFER_ALLOC);
+ memcpy(ioc->internal_cmds.sense, sense_data, sz);
}
-
- del_timer(&hd->timer);
- req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
- mptscsih_set_scsi_lookup(ioc, req_idx, NULL);
- pReq = (SCSIIORequest_t *) mf;
-
- if (mf != hd->cmdPtr) {
- printk(MYIOC_s_WARN_FMT "ScanDvComplete (mf=%p, cmdPtr=%p, idx=%d)\n",
- ioc->name, (void *)mf, (void *) hd->cmdPtr, req_idx);
- }
- hd->cmdPtr = NULL;
-
- ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScanDvComplete (mf=%p,mr=%p,idx=%d)\n",
- ioc->name, mf, mr, req_idx));
-
- hd->pLocal = &hd->localReply;
- hd->pLocal->scsiStatus = 0;
-
- /* If target struct exists, clear sense valid flag.
- */
- if (mr == NULL) {
- completionCode = MPT_SCANDV_GOOD;
- } else {
- SCSIIOReply_t *pReply;
- u16 status;
- u8 scsi_status;
-
- pReply = (SCSIIOReply_t *) mr;
-
- status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
- scsi_status = pReply->SCSIStatus;
-
-
- switch(status) {
-
- case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
- completionCode = MPT_SCANDV_SELECTION_TIMEOUT;
- break;
-
- case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
- case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
- case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
- case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
- completionCode = MPT_SCANDV_DID_RESET;
- break;
-
- case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
- case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
- case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
- if (pReply->Function == MPI_FUNCTION_CONFIG) {
- ConfigReply_t *pr = (ConfigReply_t *)mr;
- completionCode = MPT_SCANDV_GOOD;
- hd->pLocal->header.PageVersion = pr->Header.PageVersion;
- hd->pLocal->header.PageLength = pr->Header.PageLength;
- hd->pLocal->header.PageNumber = pr->Header.PageNumber;
- hd->pLocal->header.PageType = pr->Header.PageType;
-
- } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
- /* If the RAID Volume request is successful,
- * return GOOD, else indicate that
- * some type of error occurred.
- */
- MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr;
- if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
- completionCode = MPT_SCANDV_GOOD;
- else
- completionCode = MPT_SCANDV_SOME_ERROR;
- memcpy(hd->pLocal->sense, pr, sizeof(hd->pLocal->sense));
-
- } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
- u8 *sense_data;
- int sz;
-
- /* save sense data in global structure
- */
- completionCode = MPT_SCANDV_SENSE;
- hd->pLocal->scsiStatus = scsi_status;
- sense_data = ((u8 *)ioc->sense_buf_pool +
- (req_idx * MPT_SENSE_BUFFER_ALLOC));
-
- sz = min_t(int, pReq->SenseBufferLength,
- SCSI_STD_SENSE_BYTES);
- memcpy(hd->pLocal->sense, sense_data, sz);
-
- ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Check Condition, sense ptr %p\n",
- ioc->name, sense_data));
- } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
- if (pReq->CDB[0] == INQUIRY)
- completionCode = MPT_SCANDV_ISSUE_SENSE;
- else
- completionCode = MPT_SCANDV_DID_RESET;
- }
- else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
- completionCode = MPT_SCANDV_DID_RESET;
- else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
- completionCode = MPT_SCANDV_DID_RESET;
- else {
- completionCode = MPT_SCANDV_GOOD;
- hd->pLocal->scsiStatus = scsi_status;
- }
- break;
-
- case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
- if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
- completionCode = MPT_SCANDV_DID_RESET;
- else
- completionCode = MPT_SCANDV_SOME_ERROR;
- break;
-
- default:
- completionCode = MPT_SCANDV_SOME_ERROR;
- break;
-
- } /* switch(status) */
-
- } /* end of address reply case */
-
- hd->pLocal->completion = completionCode;
-
- /* MF and RF are freed in mpt_interrupt
- */
-wakeup:
- /* Free Chain buffers (will never chain) in scan or dv */
- //mptscsih_freeChainBuffers(ioc, req_idx);
-
- /*
- * Wake up the original calling thread
- */
- hd->scandv_wait_done = 1;
- wake_up(&hd->scandv_waitq);
-
+ out:
+ if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_PENDING))
+ return 0;
+ ioc->internal_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
+ complete(&ioc->internal_cmds.done);
return 1;
}
@@ -3004,6 +2672,95 @@
return;
}
+/**
+ * mptscsih_get_completion_code -
+ * @ioc: Pointer to MPT_ADAPTER structure
+ * @reply:
+ * @cmd:
+ *
+ **/
+static int
+mptscsih_get_completion_code(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
+ MPT_FRAME_HDR *reply)
+{
+ SCSIIOReply_t *pReply;
+ MpiRaidActionReply_t *pr;
+ u8 scsi_status;
+ u16 status;
+ int completion_code;
+
+ pReply = (SCSIIOReply_t *)reply;
+ status = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
+ scsi_status = pReply->SCSIStatus;
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "IOCStatus=%04xh, SCSIState=%02xh, SCSIStatus=%02xh,"
+ "IOCLogInfo=%08xh\n", ioc->name, status, pReply->SCSIState,
+ scsi_status, le32_to_cpu(pReply->IOCLogInfo)));
+
+ switch (status) {
+
+ case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
+ completion_code = MPT_SCANDV_SELECTION_TIMEOUT;
+ break;
+
+ case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
+ case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
+ case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
+ case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
+ completion_code = MPT_SCANDV_DID_RESET;
+ break;
+
+ case MPI_IOCSTATUS_BUSY:
+ case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
+ completion_code = MPT_SCANDV_BUSY;
+ break;
+
+ case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
+ case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
+ case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */
+ if (pReply->Function == MPI_FUNCTION_CONFIG) {
+ completion_code = MPT_SCANDV_GOOD;
+ } else if (pReply->Function == MPI_FUNCTION_RAID_ACTION) {
+ pr = (MpiRaidActionReply_t *)reply;
+ if (le16_to_cpu(pr->ActionStatus) ==
+ MPI_RAID_ACTION_ASTATUS_SUCCESS)
+ completion_code = MPT_SCANDV_GOOD;
+ else
+ completion_code = MPT_SCANDV_SOME_ERROR;
+ } else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID)
+ completion_code = MPT_SCANDV_SENSE;
+ else if (pReply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
+ if (req->u.scsireq.CDB[0] == INQUIRY)
+ completion_code = MPT_SCANDV_ISSUE_SENSE;
+ else
+ completion_code = MPT_SCANDV_DID_RESET;
+ } else if (pReply->SCSIState & MPI_SCSI_STATE_NO_SCSI_STATUS)
+ completion_code = MPT_SCANDV_DID_RESET;
+ else if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+ completion_code = MPT_SCANDV_DID_RESET;
+ else if (scsi_status == MPI_SCSI_STATUS_BUSY)
+ completion_code = MPT_SCANDV_BUSY;
+ else
+ completion_code = MPT_SCANDV_GOOD;
+ break;
+
+ case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
+ if (pReply->SCSIState & MPI_SCSI_STATE_TERMINATED)
+ completion_code = MPT_SCANDV_DID_RESET;
+ else
+ completion_code = MPT_SCANDV_SOME_ERROR;
+ break;
+ default:
+ completion_code = MPT_SCANDV_SOME_ERROR;
+ break;
+
+ } /* switch(status) */
+
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ " completionCode set to %08xh\n", ioc->name, completion_code));
+ return completion_code;
+}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
/**
@@ -3030,22 +2787,27 @@
{
MPT_FRAME_HDR *mf;
SCSIIORequest_t *pScsiReq;
- SCSIIORequest_t ReqCopy;
int my_idx, ii, dir;
- int rc, cmdTimeout;
- int in_isr;
+ int timeout;
char cmdLen;
char CDB[]={0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
- char cmd = io->cmd;
- MPT_ADAPTER *ioc = hd->ioc;
+ u8 cmd = io->cmd;
+ MPT_ADAPTER *ioc = hd->ioc;
+ int ret = 0;
+ unsigned long timeleft;
+ unsigned long flags;
- in_isr = in_interrupt();
- if (in_isr) {
- dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Internal SCSI IO request not allowed in ISR context!\n",
- ioc->name));
- return -EPERM;
+ /* don't send internal command during diag reset */
+ spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
+ if (ioc->ioc_reset_in_progress) {
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: busy with host reset\n", ioc->name, __func__));
+ return MPT_SCANDV_BUSY;
}
+ spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
+ mutex_lock(&ioc->internal_cmds.mutex);
/* Set command specific information
*/
@@ -3055,13 +2817,13 @@
dir = MPI_SCSIIO_CONTROL_READ;
CDB[0] = cmd;
CDB[4] = io->size;
- cmdTimeout = 10;
+ timeout = 10;
break;
case TEST_UNIT_READY:
cmdLen = 6;
dir = MPI_SCSIIO_CONTROL_READ;
- cmdTimeout = 10;
+ timeout = 10;
break;
case START_STOP:
@@ -3069,7 +2831,7 @@
dir = MPI_SCSIIO_CONTROL_READ;
CDB[0] = cmd;
CDB[4] = 1; /*Spin up the disk */
- cmdTimeout = 15;
+ timeout = 15;
break;
case REQUEST_SENSE:
@@ -3077,7 +2839,7 @@
CDB[0] = cmd;
CDB[4] = io->size;
dir = MPI_SCSIIO_CONTROL_READ;
- cmdTimeout = 10;
+ timeout = 10;
break;
case READ_BUFFER:
@@ -3096,7 +2858,7 @@
CDB[6] = (io->size >> 16) & 0xFF;
CDB[7] = (io->size >> 8) & 0xFF;
CDB[8] = io->size & 0xFF;
- cmdTimeout = 10;
+ timeout = 10;
break;
case WRITE_BUFFER:
@@ -3111,21 +2873,21 @@
CDB[6] = (io->size >> 16) & 0xFF;
CDB[7] = (io->size >> 8) & 0xFF;
CDB[8] = io->size & 0xFF;
- cmdTimeout = 10;
+ timeout = 10;
break;
case RESERVE:
cmdLen = 6;
dir = MPI_SCSIIO_CONTROL_READ;
CDB[0] = cmd;
- cmdTimeout = 10;
+ timeout = 10;
break;
case RELEASE:
cmdLen = 6;
dir = MPI_SCSIIO_CONTROL_READ;
CDB[0] = cmd;
- cmdTimeout = 10;
+ timeout = 10;
break;
case SYNCHRONIZE_CACHE:
@@ -3133,20 +2895,23 @@
dir = MPI_SCSIIO_CONTROL_READ;
CDB[0] = cmd;
// CDB[1] = 0x02; /* set immediate bit */
- cmdTimeout = 10;
+ timeout = 10;
break;
default:
/* Error Case */
- return -EFAULT;
+ ret = -EFAULT;
+ goto out;
}
/* Get and Populate a free Frame
+ * MsgContext set in mpt_get_msg_frame call
*/
if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
- dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "No msg frames!\n",
- ioc->name));
- return -EBUSY;
+ dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
+ ioc->name, __func__));
+ ret = MPT_SCANDV_BUSY;
+ goto out;
}
pScsiReq = (SCSIIORequest_t *) mf;
@@ -3172,7 +2937,7 @@
pScsiReq->Reserved = 0;
- pScsiReq->MsgFlags = mpt_msg_flags();
+ pScsiReq->MsgFlags = mpt_msg_flags(ioc);
/* MsgContext set in mpt_get_msg_fram call */
int_to_scsilun(io->lun, (struct scsi_lun *)pScsiReq->LUN);
@@ -3184,74 +2949,58 @@
if (cmd == REQUEST_SENSE) {
pScsiReq->Control = cpu_to_le32(dir | MPI_SCSIIO_CONTROL_UNTAGGED);
- ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Untagged! 0x%2x\n",
- ioc->name, cmd));
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Untagged! 0x%02x\n", ioc->name, __func__, cmd));
}
- for (ii=0; ii < 16; ii++)
+ for (ii = 0; ii < 16; ii++)
pScsiReq->CDB[ii] = CDB[ii];
pScsiReq->DataLength = cpu_to_le32(io->size);
pScsiReq->SenseBufferLowAddr = cpu_to_le32(ioc->sense_buf_low_dma
+ (my_idx * MPT_SENSE_BUFFER_ALLOC));
- ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Command 0x%x for (%d:%d:%d)\n",
- ioc->name, cmd, io->channel, io->id, io->lun));
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: Sending Command 0x%02x for fw_channel=%d fw_id=%d lun=%d\n",
+ ioc->name, __func__, cmd, io->channel, io->id, io->lun));
- if (dir == MPI_SCSIIO_CONTROL_READ) {
- mpt_add_sge((char *) &pScsiReq->SGL,
- MPT_SGE_FLAGS_SSIMPLE_READ | io->size,
- io->data_dma);
- } else {
- mpt_add_sge((char *) &pScsiReq->SGL,
- MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size,
- io->data_dma);
- }
+ if (dir == MPI_SCSIIO_CONTROL_READ)
+ ioc->add_sge((char *) &pScsiReq->SGL,
+ MPT_SGE_FLAGS_SSIMPLE_READ | io->size, io->data_dma);
+ else
+ ioc->add_sge((char *) &pScsiReq->SGL,
+ MPT_SGE_FLAGS_SSIMPLE_WRITE | io->size, io->data_dma);
- /* The ISR will free the request frame, but we need
- * the information to initialize the target. Duplicate.
- */
- memcpy(&ReqCopy, pScsiReq, sizeof(SCSIIORequest_t));
-
- /* Issue this command after:
- * finish init
- * add timer
- * Wait until the reply has been received
- * ScsiScanDvCtx callback function will
- * set hd->pLocal;
- * set scandv_wait_done and call wake_up
- */
- hd->pLocal = NULL;
- hd->timer.expires = jiffies + HZ*cmdTimeout;
- hd->scandv_wait_done = 0;
-
- /* Save cmd pointer, for resource free if timeout or
- * FW reload occurs
- */
- hd->cmdPtr = mf;
-
- add_timer(&hd->timer);
+ INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
- wait_event(hd->scandv_waitq, hd->scandv_wait_done);
-
- if (hd->pLocal) {
- rc = hd->pLocal->completion;
- hd->pLocal->skip = 0;
-
- /* Always set fatal error codes in some cases.
- */
- if (rc == MPT_SCANDV_SELECTION_TIMEOUT)
- rc = -ENXIO;
- else if (rc == MPT_SCANDV_SOME_ERROR)
- rc = -rc;
- } else {
- rc = -EFAULT;
- /* This should never happen. */
- ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "_do_cmd: Null pLocal!!!\n",
- ioc->name));
+ timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done,
+ timeout*HZ);
+ if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = MPT_SCANDV_DID_RESET;
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
+ "%s: TIMED OUT for cmd=0x%02x\n", ioc->name, __func__,
+ cmd));
+ if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET) {
+ mpt_free_msg_frame(ioc, mf);
+ goto out;
+ }
+ if (!timeleft) {
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ }
+ goto out;
}
- return rc;
+ ret = ioc->internal_cmds.completion_code;
+ devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
+ ioc->name, __func__, ret));
+
+ out:
+ CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+ mutex_unlock(&ioc->internal_cmds.mutex);
+ return ret;
}
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -3491,6 +3240,7 @@
&dev_attr_debug_level,
NULL,
};
+
EXPORT_SYMBOL(mptscsih_host_attrs);
EXPORT_SYMBOL(mptscsih_remove);
@@ -3516,6 +3266,5 @@
EXPORT_SYMBOL(mptscsih_ioc_reset);
EXPORT_SYMBOL(mptscsih_change_queue_depth);
EXPORT_SYMBOL(mptscsih_timer_expired);
-EXPORT_SYMBOL(mptscsih_TMHandler);
/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 319aa30..eb3f677 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -60,6 +60,7 @@
#define MPT_SCANDV_SELECTION_TIMEOUT (0x00000008)
#define MPT_SCANDV_ISSUE_SENSE (0x00000010)
#define MPT_SCANDV_FALLBACK (0x00000020)
+#define MPT_SCANDV_BUSY (0x00000040)
#define MPT_SCANDV_MAX_RETRIES (10)
@@ -89,6 +90,7 @@
#endif
+
typedef struct _internal_cmd {
char *data; /* data pointer */
dma_addr_t data_dma; /* data dma address */
@@ -112,6 +114,8 @@
extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func);
extern const char * mptscsih_info(struct Scsi_Host *SChost);
extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *));
+extern int mptscsih_IssueTaskMgmt(MPT_SCSI_HOST *hd, u8 type, u8 channel,
+ u8 id, int lun, int ctx2abort, ulong timeout);
extern void mptscsih_slave_destroy(struct scsi_device *device);
extern int mptscsih_slave_configure(struct scsi_device *device);
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);
@@ -126,7 +130,8 @@
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern void mptscsih_timer_expired(unsigned long data);
-extern int mptscsih_TMHandler(MPT_SCSI_HOST *hd, u8 type, u8 channel, u8 id, int lun, int ctx2abort, ulong timeout);
extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
extern struct device_attribute *mptscsih_host_attrs[];
+extern struct scsi_cmnd *mptscsih_get_scsi_lookup(MPT_ADAPTER *ioc, int i);
+extern void mptscsih_taskmgmt_response_code(MPT_ADAPTER *ioc, u8 response_code);
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 6162014..c5b808f 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -300,7 +300,7 @@
flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
(IOCPage4Ptr->Header.PageLength + ii) * 4;
- mpt_add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
+ ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
@@ -614,19 +614,24 @@
spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
}
-static int
+int
mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
{
+ MPT_ADAPTER *ioc = hd->ioc;
MpiRaidActionRequest_t *pReq;
MPT_FRAME_HDR *mf;
- MPT_ADAPTER *ioc = hd->ioc;
+ int ret;
+ unsigned long timeleft;
+
+ mutex_lock(&ioc->internal_cmds.mutex);
/* Get and Populate a free Frame
*/
if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
- ddvprintk(ioc, printk(MYIOC_s_WARN_FMT "_do_raid: no msg frames!\n",
- ioc->name));
- return -EAGAIN;
+ dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
+ "%s: no msg frames!\n", ioc->name, __func__));
+ ret = -EAGAIN;
+ goto out;
}
pReq = (MpiRaidActionRequest_t *)mf;
if (quiesce)
@@ -643,29 +648,36 @@
pReq->Reserved2 = 0;
pReq->ActionDataWord = 0; /* Reserved for this action */
- mpt_add_sge((char *)&pReq->ActionDataSGE,
+ ioc->add_sge((char *)&pReq->ActionDataSGE,
MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
ioc->name, pReq->Action, channel, id));
- hd->pLocal = NULL;
- hd->timer.expires = jiffies + HZ*10; /* 10 second timeout */
- hd->scandv_wait_done = 0;
-
- /* Save cmd pointer, for resource free if timeout or
- * FW reload occurs
- */
- hd->cmdPtr = mf;
-
- add_timer(&hd->timer);
+ INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
- wait_event(hd->scandv_waitq, hd->scandv_wait_done);
+ timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
+ if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
+ ret = -ETIME;
+ dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
+ ioc->name, __func__));
+ if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
+ goto out;
+ if (!timeleft) {
+ printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
+ ioc->name, __func__);
+ mpt_HardResetHandler(ioc, CAN_SLEEP);
+ mpt_free_msg_frame(ioc, mf);
+ }
+ goto out;
+ }
- if ((hd->pLocal == NULL) || (hd->pLocal->completion != 0))
- return -1;
+ ret = ioc->internal_cmds.completion_code;
- return 0;
+ out:
+ CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
+ mutex_unlock(&ioc->internal_cmds.mutex);
+ return ret;
}
static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
@@ -1423,17 +1435,15 @@
* A slightly different algorithm is required for
* 64bit SGEs.
*/
- scale = ioc->req_sz/(sizeof(dma_addr_t) + sizeof(u32));
- if (sizeof(dma_addr_t) == sizeof(u64)) {
+ scale = ioc->req_sz/ioc->SGE_size;
+ if (ioc->sg_addr_size == sizeof(u64)) {
numSGE = (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 60) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 60) / ioc->SGE_size;
} else {
numSGE = 1 + (scale - 1) *
(ioc->facts.MaxChainDepth-1) + scale +
- (ioc->req_sz - 64) / (sizeof(dma_addr_t) +
- sizeof(u32));
+ (ioc->req_sz - 64) / ioc->SGE_size;
}
if (numSGE < sh->sg_tablesize) {
@@ -1464,9 +1474,6 @@
/* Clear the TM flags
*/
- hd->tmPending = 0;
- hd->tmState = TM_STATE_NONE;
- hd->resetPending = 0;
hd->abortSCpnt = NULL;
/* Clear the pointer used to store
@@ -1493,8 +1500,6 @@
mpt_saf_te));
ioc->spi_data.noQas = 0;
- init_waitqueue_head(&hd->scandv_waitq);
- hd->scandv_wait_done = 0;
hd->last_queue_full = 0;
hd->spi_pending = 0;
@@ -1514,7 +1519,7 @@
* issue internal bus reset
*/
if (ioc->spi_data.bus_reset)
- mptscsih_TMHandler(hd,
+ mptscsih_IssueTaskMgmt(hd,
MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
0, 0, 0, 0, 5);
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 214a92d..f3c4a3b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2264,6 +2264,17 @@
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
+config CNIC
+ tristate "Broadcom CNIC support"
+ depends on BNX2
+ depends on UIO
+ help
+ This driver supports offload features of Broadcom NetXtremeII
+ gigabit Ethernet cards.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cnic. This is recommended.
+
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a1c25cb..db30ebd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -73,6 +73,7 @@
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
+obj-$(CONFIG_CNIC) += cnic.o
obj-$(CONFIG_BNX2X) += bnx2x.o
bnx2x-objs := bnx2x_main.o bnx2x_link.o
spidernet-y += spider_net.o spider_net_ethtool.o
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index b0cb29d..3f5fcb0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -49,6 +49,10 @@
#include <linux/firmware.h>
#include <linux/log2.h>
+#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
+#define BCM_CNIC 1
+#include "cnic_if.h"
+#endif
#include "bnx2.h"
#include "bnx2_fw.h"
@@ -315,6 +319,158 @@
spin_unlock_bh(&bp->indirect_lock);
}
+#ifdef BCM_CNIC
+static int
+bnx2_drv_ctl(struct net_device *dev, struct drv_ctl_info *info)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct drv_ctl_io *io = &info->data.io;
+
+ switch (info->cmd) {
+ case DRV_CTL_IO_WR_CMD:
+ bnx2_reg_wr_ind(bp, io->offset, io->data);
+ break;
+ case DRV_CTL_IO_RD_CMD:
+ io->data = bnx2_reg_rd_ind(bp, io->offset);
+ break;
+ case DRV_CTL_CTX_WR_CMD:
+ bnx2_ctx_wr(bp, io->cid_addr, io->offset, io->data);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void bnx2_setup_cnic_irq_info(struct bnx2 *bp)
+{
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+ int sb_id;
+
+ if (bp->flags & BNX2_FLAG_USING_MSIX) {
+ cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+ bnapi->cnic_present = 0;
+ sb_id = bp->irq_nvecs;
+ cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+ } else {
+ cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+ bnapi->cnic_tag = bnapi->last_status_idx;
+ bnapi->cnic_present = 1;
+ sb_id = 0;
+ cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+ }
+
+ cp->irq_arr[0].vector = bp->irq_tbl[sb_id].vector;
+ cp->irq_arr[0].status_blk = (void *)
+ ((unsigned long) bnapi->status_blk.msi +
+ (BNX2_SBLK_MSIX_ALIGN_SIZE * sb_id));
+ cp->irq_arr[0].status_blk_num = sb_id;
+ cp->num_irq = 1;
+}
+
+static int bnx2_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+ void *data)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+ if (ops == NULL)
+ return -EINVAL;
+
+ if (cp->drv_state & CNIC_DRV_STATE_REGD)
+ return -EBUSY;
+
+ bp->cnic_data = data;
+ rcu_assign_pointer(bp->cnic_ops, ops);
+
+ cp->num_irq = 0;
+ cp->drv_state = CNIC_DRV_STATE_REGD;
+
+ bnx2_setup_cnic_irq_info(bp);
+
+ return 0;
+}
+
+static int bnx2_unregister_cnic(struct net_device *dev)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+ cp->drv_state = 0;
+ bnapi->cnic_present = 0;
+ rcu_assign_pointer(bp->cnic_ops, NULL);
+ synchronize_rcu();
+ return 0;
+}
+
+struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev)
+{
+ struct bnx2 *bp = netdev_priv(dev);
+ struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+ cp->drv_owner = THIS_MODULE;
+ cp->chip_id = bp->chip_id;
+ cp->pdev = bp->pdev;
+ cp->io_base = bp->regview;
+ cp->drv_ctl = bnx2_drv_ctl;
+ cp->drv_register_cnic = bnx2_register_cnic;
+ cp->drv_unregister_cnic = bnx2_unregister_cnic;
+
+ return cp;
+}
+EXPORT_SYMBOL(bnx2_cnic_probe);
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+ struct cnic_ops *c_ops;
+ struct cnic_ctl_info info;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops) {
+ info.cmd = CNIC_CTL_STOP_CMD;
+ c_ops->cnic_ctl(bp->cnic_data, &info);
+ }
+ rcu_read_unlock();
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+ struct cnic_ops *c_ops;
+ struct cnic_ctl_info info;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops) {
+ if (!(bp->flags & BNX2_FLAG_USING_MSIX)) {
+ struct bnx2_napi *bnapi = &bp->bnx2_napi[0];
+
+ bnapi->cnic_tag = bnapi->last_status_idx;
+ }
+ info.cmd = CNIC_CTL_START_CMD;
+ c_ops->cnic_ctl(bp->cnic_data, &info);
+ }
+ rcu_read_unlock();
+}
+
+#else
+
+static void
+bnx2_cnic_stop(struct bnx2 *bp)
+{
+}
+
+static void
+bnx2_cnic_start(struct bnx2 *bp)
+{
+}
+
+#endif
+
static int
bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val)
{
@@ -488,6 +644,7 @@
static void
bnx2_netif_stop(struct bnx2 *bp)
{
+ bnx2_cnic_stop(bp);
bnx2_disable_int_sync(bp);
if (netif_running(bp->dev)) {
bnx2_napi_disable(bp);
@@ -504,6 +661,7 @@
netif_tx_wake_all_queues(bp->dev);
bnx2_napi_enable(bp);
bnx2_enable_int(bp);
+ bnx2_cnic_start(bp);
}
}
}
@@ -3164,6 +3322,11 @@
if (bnx2_has_fast_work(bnapi))
return 1;
+#ifdef BCM_CNIC
+ if (bnapi->cnic_present && (bnapi->cnic_tag != sblk->status_idx))
+ return 1;
+#endif
+
if ((sblk->status_attn_bits & STATUS_ATTN_EVENTS) !=
(sblk->status_attn_bits_ack & STATUS_ATTN_EVENTS))
return 1;
@@ -3193,6 +3356,23 @@
bp->idle_chk_status_idx = bnapi->last_status_idx;
}
+#ifdef BCM_CNIC
+static void bnx2_poll_cnic(struct bnx2 *bp, struct bnx2_napi *bnapi)
+{
+ struct cnic_ops *c_ops;
+
+ if (!bnapi->cnic_present)
+ return;
+
+ rcu_read_lock();
+ c_ops = rcu_dereference(bp->cnic_ops);
+ if (c_ops)
+ bnapi->cnic_tag = c_ops->cnic_handler(bp->cnic_data,
+ bnapi->status_blk.msi);
+ rcu_read_unlock();
+}
+#endif
+
static void bnx2_poll_link(struct bnx2 *bp, struct bnx2_napi *bnapi)
{
struct status_block *sblk = bnapi->status_blk.msi;
@@ -3267,6 +3447,10 @@
work_done = bnx2_poll_work(bp, bnapi, work_done, budget);
+#ifdef BCM_CNIC
+ bnx2_poll_cnic(bp, bnapi);
+#endif
+
/* bnapi->last_status_idx is used below to tell the hw how
* much work has been processed, so we must read it before
* checking for more work.
@@ -4632,8 +4816,11 @@
val = REG_RD(bp, BNX2_MQ_CONFIG);
val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256;
- if (CHIP_ID(bp) == CHIP_ID_5709_A0 || CHIP_ID(bp) == CHIP_ID_5709_A1)
- val |= BNX2_MQ_CONFIG_HALT_DIS;
+ if (CHIP_NUM(bp) == CHIP_NUM_5709) {
+ val |= BNX2_MQ_CONFIG_BIN_MQ_MODE;
+ if (CHIP_REV(bp) == CHIP_REV_Ax)
+ val |= BNX2_MQ_CONFIG_HALT_DIS;
+ }
REG_WR(bp, BNX2_MQ_CONFIG, val);
@@ -7471,7 +7658,7 @@
INIT_WORK(&bp->reset_task, bnx2_reset_task);
dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
- mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS);
+ mem_len = MB_GET_CID_ADDR(TX_TSS_CID + TX_MAX_TSS_RINGS + 1);
dev->mem_end = dev->mem_start + mem_len;
dev->irq = pdev->irq;
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 5b570e1..a1ff739 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -361,6 +361,9 @@
#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28)
#define BNX2_L2CTX_HOST_BDIDX 0x00000004
+#define BNX2_L2CTX_STATUSB_NUM_SHIFT 16
+#define BNX2_L2CTX_STATUSB_NUM(sb_id) \
+ (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
#define BNX2_L2CTX_HOST_BSEQ 0x00000008
#define BNX2_L2CTX_NX_BSEQ 0x0000000c
#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010
@@ -5900,6 +5903,7 @@
#define BNX2_RXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22)
#define BNX2_RXP_SCRATCH 0x000e0000
+#define BNX2_RXP_SCRATCH_RXP_FLOOD 0x000e0024
#define BNX2_RXP_SCRATCH_RSS_TBL_SZ 0x000e0038
#define BNX2_RXP_SCRATCH_RSS_TBL 0x000e003c
#define BNX2_RXP_SCRATCH_RSS_TBL_MAX_ENTRIES 128
@@ -6678,6 +6682,11 @@
u32 last_status_idx;
u32 int_num;
+#ifdef BCM_CNIC
+ u32 cnic_tag;
+ int cnic_present;
+#endif
+
struct bnx2_rx_ring_info rx_ring;
struct bnx2_tx_ring_info tx_ring;
};
@@ -6727,6 +6736,11 @@
int tx_ring_size;
u32 tx_wake_thresh;
+#ifdef BCM_CNIC
+ struct cnic_ops *cnic_ops;
+ void *cnic_data;
+#endif
+
/* End of fields used in the performance code paths. */
unsigned int current_interval;
@@ -6885,6 +6899,10 @@
u32 idle_chk_status_idx;
+#ifdef BCM_CNIC
+ struct cnic_eth_dev cnic_eth_dev;
+#endif
+
const struct firmware *mips_firmware;
const struct firmware *rv2p_firmware;
};
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
new file mode 100644
index 0000000..8d74037
--- /dev/null
+++ b/drivers/net/cnic.c
@@ -0,0 +1,2711 @@
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Original skeleton written by: John(Zongxi) Chen (zongxi@broadcom.com)
+ * Modified and maintained by: Michael Chan <mchan@broadcom.com>
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/uio_driver.h>
+#include <linux/in.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN 1
+#endif
+#include <net/ip.h>
+#include <net/tcp.h>
+#include <net/route.h>
+#include <net/ipv6.h>
+#include <net/ip6_route.h>
+#include <scsi/iscsi_if.h>
+
+#include "cnic_if.h"
+#include "bnx2.h"
+#include "cnic.h"
+#include "cnic_defs.h"
+
+#define DRV_MODULE_NAME "cnic"
+#define PFX DRV_MODULE_NAME ": "
+
+static char version[] __devinitdata =
+ "Broadcom NetXtreme II CNIC Driver " DRV_MODULE_NAME " v" CNIC_MODULE_VERSION " (" CNIC_MODULE_RELDATE ")\n";
+
+MODULE_AUTHOR("Michael Chan <mchan@broadcom.com> and John(Zongxi) "
+ "Chen (zongxi@broadcom.com");
+MODULE_DESCRIPTION("Broadcom NetXtreme II CNIC Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CNIC_MODULE_VERSION);
+
+static LIST_HEAD(cnic_dev_list);
+static DEFINE_RWLOCK(cnic_dev_lock);
+static DEFINE_MUTEX(cnic_lock);
+
+static struct cnic_ulp_ops *cnic_ulp_tbl[MAX_CNIC_ULP_TYPE];
+
+static int cnic_service_bnx2(void *, void *);
+static int cnic_ctl(void *, struct cnic_ctl_info *);
+
+static struct cnic_ops cnic_bnx2_ops = {
+ .cnic_owner = THIS_MODULE,
+ .cnic_handler = cnic_service_bnx2,
+ .cnic_ctl = cnic_ctl,
+};
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *);
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *);
+static int cnic_cm_set_pg(struct cnic_sock *);
+
+static int cnic_uio_open(struct uio_info *uinfo, struct inode *inode)
+{
+ struct cnic_dev *dev = uinfo->priv;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (cp->uio_dev != -1)
+ return -EBUSY;
+
+ cp->uio_dev = iminor(inode);
+
+ cnic_shutdown_bnx2_rx_ring(dev);
+
+ cnic_init_bnx2_tx_ring(dev);
+ cnic_init_bnx2_rx_ring(dev);
+
+ return 0;
+}
+
+static int cnic_uio_close(struct uio_info *uinfo, struct inode *inode)
+{
+ struct cnic_dev *dev = uinfo->priv;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ cp->uio_dev = -1;
+ return 0;
+}
+
+static inline void cnic_hold(struct cnic_dev *dev)
+{
+ atomic_inc(&dev->ref_count);
+}
+
+static inline void cnic_put(struct cnic_dev *dev)
+{
+ atomic_dec(&dev->ref_count);
+}
+
+static inline void csk_hold(struct cnic_sock *csk)
+{
+ atomic_inc(&csk->ref_count);
+}
+
+static inline void csk_put(struct cnic_sock *csk)
+{
+ atomic_dec(&csk->ref_count);
+}
+
+static struct cnic_dev *cnic_from_netdev(struct net_device *netdev)
+{
+ struct cnic_dev *cdev;
+
+ read_lock(&cnic_dev_lock);
+ list_for_each_entry(cdev, &cnic_dev_list, list) {
+ if (netdev == cdev->netdev) {
+ cnic_hold(cdev);
+ read_unlock(&cnic_dev_lock);
+ return cdev;
+ }
+ }
+ read_unlock(&cnic_dev_lock);
+ return NULL;
+}
+
+static void cnic_ctx_wr(struct cnic_dev *dev, u32 cid_addr, u32 off, u32 val)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ struct drv_ctl_info info;
+ struct drv_ctl_io *io = &info.data.io;
+
+ info.cmd = DRV_CTL_CTX_WR_CMD;
+ io->cid_addr = cid_addr;
+ io->offset = off;
+ io->data = val;
+ ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static void cnic_reg_wr_ind(struct cnic_dev *dev, u32 off, u32 val)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ struct drv_ctl_info info;
+ struct drv_ctl_io *io = &info.data.io;
+
+ info.cmd = DRV_CTL_IO_WR_CMD;
+ io->offset = off;
+ io->data = val;
+ ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static u32 cnic_reg_rd_ind(struct cnic_dev *dev, u32 off)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ struct drv_ctl_info info;
+ struct drv_ctl_io *io = &info.data.io;
+
+ info.cmd = DRV_CTL_IO_RD_CMD;
+ io->offset = off;
+ ethdev->drv_ctl(dev->netdev, &info);
+ return io->data;
+}
+
+static int cnic_in_use(struct cnic_sock *csk)
+{
+ return test_bit(SK_F_INUSE, &csk->flags);
+}
+
+static void cnic_kwq_completion(struct cnic_dev *dev, u32 count)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ struct drv_ctl_info info;
+
+ info.cmd = DRV_CTL_COMPLETION_CMD;
+ info.data.comp.comp_count = count;
+ ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
+ struct cnic_sock *csk)
+{
+ struct iscsi_path path_req;
+ char *buf = NULL;
+ u16 len = 0;
+ u32 msg_type = ISCSI_KEVENT_IF_DOWN;
+ struct cnic_ulp_ops *ulp_ops;
+
+ if (cp->uio_dev == -1)
+ return -ENODEV;
+
+ if (csk) {
+ len = sizeof(path_req);
+ buf = (char *) &path_req;
+ memset(&path_req, 0, len);
+
+ msg_type = ISCSI_KEVENT_PATH_REQ;
+ path_req.handle = (u64) csk->l5_cid;
+ if (test_bit(SK_F_IPV6, &csk->flags)) {
+ memcpy(&path_req.dst.v6_addr, &csk->dst_ip[0],
+ sizeof(struct in6_addr));
+ path_req.ip_addr_len = 16;
+ } else {
+ memcpy(&path_req.dst.v4_addr, &csk->dst_ip[0],
+ sizeof(struct in_addr));
+ path_req.ip_addr_len = 4;
+ }
+ path_req.vlan_id = csk->vlan_id;
+ path_req.pmtu = csk->mtu;
+ }
+
+ rcu_read_lock();
+ ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+ if (ulp_ops)
+ ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
+ rcu_read_unlock();
+ return 0;
+}
+
+static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
+ char *buf, u16 len)
+{
+ int rc = -EINVAL;
+
+ switch (msg_type) {
+ case ISCSI_UEVENT_PATH_UPDATE: {
+ struct cnic_local *cp;
+ u32 l5_cid;
+ struct cnic_sock *csk;
+ struct iscsi_path *path_resp;
+
+ if (len < sizeof(*path_resp))
+ break;
+
+ path_resp = (struct iscsi_path *) buf;
+ cp = dev->cnic_priv;
+ l5_cid = (u32) path_resp->handle;
+ if (l5_cid >= MAX_CM_SK_TBL_SZ)
+ break;
+
+ csk = &cp->csk_tbl[l5_cid];
+ csk_hold(csk);
+ if (cnic_in_use(csk)) {
+ memcpy(csk->ha, path_resp->mac_addr, 6);
+ if (test_bit(SK_F_IPV6, &csk->flags))
+ memcpy(&csk->src_ip[0], &path_resp->src.v6_addr,
+ sizeof(struct in6_addr));
+ else
+ memcpy(&csk->src_ip[0], &path_resp->src.v4_addr,
+ sizeof(struct in_addr));
+ if (is_valid_ether_addr(csk->ha))
+ cnic_cm_set_pg(csk);
+ }
+ csk_put(csk);
+ rc = 0;
+ }
+ }
+
+ return rc;
+}
+
+static int cnic_offld_prep(struct cnic_sock *csk)
+{
+ if (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+ return 0;
+
+ if (!test_bit(SK_F_CONNECT_START, &csk->flags)) {
+ clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+ return 0;
+ }
+
+ return 1;
+}
+
+static int cnic_close_prep(struct cnic_sock *csk)
+{
+ clear_bit(SK_F_CONNECT_START, &csk->flags);
+ smp_mb__after_clear_bit();
+
+ if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+ while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+ msleep(1);
+
+ return 1;
+ }
+ return 0;
+}
+
+static int cnic_abort_prep(struct cnic_sock *csk)
+{
+ clear_bit(SK_F_CONNECT_START, &csk->flags);
+ smp_mb__after_clear_bit();
+
+ while (test_and_set_bit(SK_F_OFFLD_SCHED, &csk->flags))
+ msleep(1);
+
+ if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+ csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+ return 1;
+ }
+
+ return 0;
+}
+
+int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
+{
+ struct cnic_dev *dev;
+
+ if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+ printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
+ ulp_type);
+ return -EINVAL;
+ }
+ mutex_lock(&cnic_lock);
+ if (cnic_ulp_tbl[ulp_type]) {
+ printk(KERN_ERR PFX "cnic_register_driver: Type %d has already "
+ "been registered\n", ulp_type);
+ mutex_unlock(&cnic_lock);
+ return -EBUSY;
+ }
+
+ read_lock(&cnic_dev_lock);
+ list_for_each_entry(dev, &cnic_dev_list, list) {
+ struct cnic_local *cp = dev->cnic_priv;
+
+ clear_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]);
+ }
+ read_unlock(&cnic_dev_lock);
+
+ rcu_assign_pointer(cnic_ulp_tbl[ulp_type], ulp_ops);
+ mutex_unlock(&cnic_lock);
+
+ /* Prevent race conditions with netdev_event */
+ rtnl_lock();
+ read_lock(&cnic_dev_lock);
+ list_for_each_entry(dev, &cnic_dev_list, list) {
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]))
+ ulp_ops->cnic_init(dev);
+ }
+ read_unlock(&cnic_dev_lock);
+ rtnl_unlock();
+
+ return 0;
+}
+
+int cnic_unregister_driver(int ulp_type)
+{
+ struct cnic_dev *dev;
+
+ if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+ printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
+ ulp_type);
+ return -EINVAL;
+ }
+ mutex_lock(&cnic_lock);
+ if (!cnic_ulp_tbl[ulp_type]) {
+ printk(KERN_ERR PFX "cnic_unregister_driver: Type %d has not "
+ "been registered\n", ulp_type);
+ goto out_unlock;
+ }
+ read_lock(&cnic_dev_lock);
+ list_for_each_entry(dev, &cnic_dev_list, list) {
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+ printk(KERN_ERR PFX "cnic_unregister_driver: Type %d "
+ "still has devices registered\n", ulp_type);
+ read_unlock(&cnic_dev_lock);
+ goto out_unlock;
+ }
+ }
+ read_unlock(&cnic_dev_lock);
+
+ rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
+
+ mutex_unlock(&cnic_lock);
+ synchronize_rcu();
+ return 0;
+
+out_unlock:
+ mutex_unlock(&cnic_lock);
+ return -EINVAL;
+}
+
+static int cnic_start_hw(struct cnic_dev *);
+static void cnic_stop_hw(struct cnic_dev *);
+
+static int cnic_register_device(struct cnic_dev *dev, int ulp_type,
+ void *ulp_ctx)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_ulp_ops *ulp_ops;
+
+ if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+ printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
+ ulp_type);
+ return -EINVAL;
+ }
+ mutex_lock(&cnic_lock);
+ if (cnic_ulp_tbl[ulp_type] == NULL) {
+ printk(KERN_ERR PFX "cnic_register_device: Driver with type %d "
+ "has not been registered\n", ulp_type);
+ mutex_unlock(&cnic_lock);
+ return -EAGAIN;
+ }
+ if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+ printk(KERN_ERR PFX "cnic_register_device: Type %d has already "
+ "been registered to this device\n", ulp_type);
+ mutex_unlock(&cnic_lock);
+ return -EBUSY;
+ }
+
+ clear_bit(ULP_F_START, &cp->ulp_flags[ulp_type]);
+ cp->ulp_handle[ulp_type] = ulp_ctx;
+ ulp_ops = cnic_ulp_tbl[ulp_type];
+ rcu_assign_pointer(cp->ulp_ops[ulp_type], ulp_ops);
+ cnic_hold(dev);
+
+ if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+ if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[ulp_type]))
+ ulp_ops->cnic_start(cp->ulp_handle[ulp_type]);
+
+ mutex_unlock(&cnic_lock);
+
+ return 0;
+
+}
+EXPORT_SYMBOL(cnic_register_driver);
+
+static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+ printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
+ ulp_type);
+ return -EINVAL;
+ }
+ mutex_lock(&cnic_lock);
+ if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+ rcu_assign_pointer(cp->ulp_ops[ulp_type], NULL);
+ cnic_put(dev);
+ } else {
+ printk(KERN_ERR PFX "cnic_unregister_device: device not "
+ "registered to this ulp type %d\n", ulp_type);
+ mutex_unlock(&cnic_lock);
+ return -EINVAL;
+ }
+ mutex_unlock(&cnic_lock);
+
+ synchronize_rcu();
+
+ return 0;
+}
+EXPORT_SYMBOL(cnic_unregister_driver);
+
+static int cnic_init_id_tbl(struct cnic_id_tbl *id_tbl, u32 size, u32 start_id)
+{
+ id_tbl->start = start_id;
+ id_tbl->max = size;
+ id_tbl->next = 0;
+ spin_lock_init(&id_tbl->lock);
+ id_tbl->table = kzalloc(DIV_ROUND_UP(size, 32) * 4, GFP_KERNEL);
+ if (!id_tbl->table)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void cnic_free_id_tbl(struct cnic_id_tbl *id_tbl)
+{
+ kfree(id_tbl->table);
+ id_tbl->table = NULL;
+}
+
+static int cnic_alloc_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+ int ret = -1;
+
+ id -= id_tbl->start;
+ if (id >= id_tbl->max)
+ return ret;
+
+ spin_lock(&id_tbl->lock);
+ if (!test_bit(id, id_tbl->table)) {
+ set_bit(id, id_tbl->table);
+ ret = 0;
+ }
+ spin_unlock(&id_tbl->lock);
+ return ret;
+}
+
+/* Returns -1 if not successful */
+static u32 cnic_alloc_new_id(struct cnic_id_tbl *id_tbl)
+{
+ u32 id;
+
+ spin_lock(&id_tbl->lock);
+ id = find_next_zero_bit(id_tbl->table, id_tbl->max, id_tbl->next);
+ if (id >= id_tbl->max) {
+ id = -1;
+ if (id_tbl->next != 0) {
+ id = find_first_zero_bit(id_tbl->table, id_tbl->next);
+ if (id >= id_tbl->next)
+ id = -1;
+ }
+ }
+
+ if (id < id_tbl->max) {
+ set_bit(id, id_tbl->table);
+ id_tbl->next = (id + 1) & (id_tbl->max - 1);
+ id += id_tbl->start;
+ }
+
+ spin_unlock(&id_tbl->lock);
+
+ return id;
+}
+
+static void cnic_free_id(struct cnic_id_tbl *id_tbl, u32 id)
+{
+ if (id == -1)
+ return;
+
+ id -= id_tbl->start;
+ if (id >= id_tbl->max)
+ return;
+
+ clear_bit(id, id_tbl->table);
+}
+
+static void cnic_free_dma(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+ int i;
+
+ if (!dma->pg_arr)
+ return;
+
+ for (i = 0; i < dma->num_pages; i++) {
+ if (dma->pg_arr[i]) {
+ pci_free_consistent(dev->pcidev, BCM_PAGE_SIZE,
+ dma->pg_arr[i], dma->pg_map_arr[i]);
+ dma->pg_arr[i] = NULL;
+ }
+ }
+ if (dma->pgtbl) {
+ pci_free_consistent(dev->pcidev, dma->pgtbl_size,
+ dma->pgtbl, dma->pgtbl_map);
+ dma->pgtbl = NULL;
+ }
+ kfree(dma->pg_arr);
+ dma->pg_arr = NULL;
+ dma->num_pages = 0;
+}
+
+static void cnic_setup_page_tbl(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+ int i;
+ u32 *page_table = dma->pgtbl;
+
+ for (i = 0; i < dma->num_pages; i++) {
+ /* Each entry needs to be in big endian format. */
+ *page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32);
+ page_table++;
+ *page_table = (u32) dma->pg_map_arr[i];
+ page_table++;
+ }
+}
+
+static int cnic_alloc_dma(struct cnic_dev *dev, struct cnic_dma *dma,
+ int pages, int use_pg_tbl)
+{
+ int i, size;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ size = pages * (sizeof(void *) + sizeof(dma_addr_t));
+ dma->pg_arr = kzalloc(size, GFP_ATOMIC);
+ if (dma->pg_arr == NULL)
+ return -ENOMEM;
+
+ dma->pg_map_arr = (dma_addr_t *) (dma->pg_arr + pages);
+ dma->num_pages = pages;
+
+ for (i = 0; i < pages; i++) {
+ dma->pg_arr[i] = pci_alloc_consistent(dev->pcidev,
+ BCM_PAGE_SIZE,
+ &dma->pg_map_arr[i]);
+ if (dma->pg_arr[i] == NULL)
+ goto error;
+ }
+ if (!use_pg_tbl)
+ return 0;
+
+ dma->pgtbl_size = ((pages * 8) + BCM_PAGE_SIZE - 1) &
+ ~(BCM_PAGE_SIZE - 1);
+ dma->pgtbl = pci_alloc_consistent(dev->pcidev, dma->pgtbl_size,
+ &dma->pgtbl_map);
+ if (dma->pgtbl == NULL)
+ goto error;
+
+ cp->setup_pgtbl(dev, dma);
+
+ return 0;
+
+error:
+ cnic_free_dma(dev, dma);
+ return -ENOMEM;
+}
+
+static void cnic_free_resc(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int i = 0;
+
+ if (cp->cnic_uinfo) {
+ cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+ while (cp->uio_dev != -1 && i < 15) {
+ msleep(100);
+ i++;
+ }
+ uio_unregister_device(cp->cnic_uinfo);
+ kfree(cp->cnic_uinfo);
+ cp->cnic_uinfo = NULL;
+ }
+
+ if (cp->l2_buf) {
+ pci_free_consistent(dev->pcidev, cp->l2_buf_size,
+ cp->l2_buf, cp->l2_buf_map);
+ cp->l2_buf = NULL;
+ }
+
+ if (cp->l2_ring) {
+ pci_free_consistent(dev->pcidev, cp->l2_ring_size,
+ cp->l2_ring, cp->l2_ring_map);
+ cp->l2_ring = NULL;
+ }
+
+ for (i = 0; i < cp->ctx_blks; i++) {
+ if (cp->ctx_arr[i].ctx) {
+ pci_free_consistent(dev->pcidev, cp->ctx_blk_size,
+ cp->ctx_arr[i].ctx,
+ cp->ctx_arr[i].mapping);
+ cp->ctx_arr[i].ctx = NULL;
+ }
+ }
+ kfree(cp->ctx_arr);
+ cp->ctx_arr = NULL;
+ cp->ctx_blks = 0;
+
+ cnic_free_dma(dev, &cp->gbl_buf_info);
+ cnic_free_dma(dev, &cp->conn_buf_info);
+ cnic_free_dma(dev, &cp->kwq_info);
+ cnic_free_dma(dev, &cp->kcq_info);
+ kfree(cp->iscsi_tbl);
+ cp->iscsi_tbl = NULL;
+ kfree(cp->ctx_tbl);
+ cp->ctx_tbl = NULL;
+
+ cnic_free_id_tbl(&cp->cid_tbl);
+}
+
+static int cnic_alloc_context(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+ int i, k, arr_size;
+
+ cp->ctx_blk_size = BCM_PAGE_SIZE;
+ cp->cids_per_blk = BCM_PAGE_SIZE / 128;
+ arr_size = BNX2_MAX_CID / cp->cids_per_blk *
+ sizeof(struct cnic_ctx);
+ cp->ctx_arr = kzalloc(arr_size, GFP_KERNEL);
+ if (cp->ctx_arr == NULL)
+ return -ENOMEM;
+
+ k = 0;
+ for (i = 0; i < 2; i++) {
+ u32 j, reg, off, lo, hi;
+
+ if (i == 0)
+ off = BNX2_PG_CTX_MAP;
+ else
+ off = BNX2_ISCSI_CTX_MAP;
+
+ reg = cnic_reg_rd_ind(dev, off);
+ lo = reg >> 16;
+ hi = reg & 0xffff;
+ for (j = lo; j < hi; j += cp->cids_per_blk, k++)
+ cp->ctx_arr[k].cid = j;
+ }
+
+ cp->ctx_blks = k;
+ if (cp->ctx_blks >= (BNX2_MAX_CID / cp->cids_per_blk)) {
+ cp->ctx_blks = 0;
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < cp->ctx_blks; i++) {
+ cp->ctx_arr[i].ctx =
+ pci_alloc_consistent(dev->pcidev, BCM_PAGE_SIZE,
+ &cp->ctx_arr[i].mapping);
+ if (cp->ctx_arr[i].ctx == NULL)
+ return -ENOMEM;
+ }
+ }
+ return 0;
+}
+
+static int cnic_alloc_bnx2_resc(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct uio_info *uinfo;
+ int ret;
+
+ ret = cnic_alloc_dma(dev, &cp->kwq_info, KWQ_PAGE_CNT, 1);
+ if (ret)
+ goto error;
+ cp->kwq = (struct kwqe **) cp->kwq_info.pg_arr;
+
+ ret = cnic_alloc_dma(dev, &cp->kcq_info, KCQ_PAGE_CNT, 1);
+ if (ret)
+ goto error;
+ cp->kcq = (struct kcqe **) cp->kcq_info.pg_arr;
+
+ ret = cnic_alloc_context(dev);
+ if (ret)
+ goto error;
+
+ cp->l2_ring_size = 2 * BCM_PAGE_SIZE;
+ cp->l2_ring = pci_alloc_consistent(dev->pcidev, cp->l2_ring_size,
+ &cp->l2_ring_map);
+ if (!cp->l2_ring)
+ goto error;
+
+ cp->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
+ cp->l2_buf_size = PAGE_ALIGN(cp->l2_buf_size);
+ cp->l2_buf = pci_alloc_consistent(dev->pcidev, cp->l2_buf_size,
+ &cp->l2_buf_map);
+ if (!cp->l2_buf)
+ goto error;
+
+ uinfo = kzalloc(sizeof(*uinfo), GFP_ATOMIC);
+ if (!uinfo)
+ goto error;
+
+ uinfo->mem[0].addr = dev->netdev->base_addr;
+ uinfo->mem[0].internal_addr = dev->regview;
+ uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
+ uinfo->mem[0].memtype = UIO_MEM_PHYS;
+
+ uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
+ if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
+ uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
+ else
+ uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
+ uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
+
+ uinfo->mem[2].addr = (unsigned long) cp->l2_ring;
+ uinfo->mem[2].size = cp->l2_ring_size;
+ uinfo->mem[2].memtype = UIO_MEM_LOGICAL;
+
+ uinfo->mem[3].addr = (unsigned long) cp->l2_buf;
+ uinfo->mem[3].size = cp->l2_buf_size;
+ uinfo->mem[3].memtype = UIO_MEM_LOGICAL;
+
+ uinfo->name = "bnx2_cnic";
+ uinfo->version = CNIC_MODULE_VERSION;
+ uinfo->irq = UIO_IRQ_CUSTOM;
+
+ uinfo->open = cnic_uio_open;
+ uinfo->release = cnic_uio_close;
+
+ uinfo->priv = dev;
+
+ ret = uio_register_device(&dev->pcidev->dev, uinfo);
+ if (ret) {
+ kfree(uinfo);
+ goto error;
+ }
+
+ cp->cnic_uinfo = uinfo;
+
+ return 0;
+
+error:
+ cnic_free_resc(dev);
+ return ret;
+}
+
+static inline u32 cnic_kwq_avail(struct cnic_local *cp)
+{
+ return cp->max_kwq_idx -
+ ((cp->kwq_prod_idx - cp->kwq_con_idx) & cp->max_kwq_idx);
+}
+
+static int cnic_submit_bnx2_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
+ u32 num_wqes)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct kwqe *prod_qe;
+ u16 prod, sw_prod, i;
+
+ if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+ return -EAGAIN; /* bnx2 is down */
+
+ spin_lock_bh(&cp->cnic_ulp_lock);
+ if (num_wqes > cnic_kwq_avail(cp) &&
+ !(cp->cnic_local_flags & CNIC_LCL_FL_KWQ_INIT)) {
+ spin_unlock_bh(&cp->cnic_ulp_lock);
+ return -EAGAIN;
+ }
+
+ cp->cnic_local_flags &= ~CNIC_LCL_FL_KWQ_INIT;
+
+ prod = cp->kwq_prod_idx;
+ sw_prod = prod & MAX_KWQ_IDX;
+ for (i = 0; i < num_wqes; i++) {
+ prod_qe = &cp->kwq[KWQ_PG(sw_prod)][KWQ_IDX(sw_prod)];
+ memcpy(prod_qe, wqes[i], sizeof(struct kwqe));
+ prod++;
+ sw_prod = prod & MAX_KWQ_IDX;
+ }
+ cp->kwq_prod_idx = prod;
+
+ CNIC_WR16(dev, cp->kwq_io_addr, cp->kwq_prod_idx);
+
+ spin_unlock_bh(&cp->cnic_ulp_lock);
+ return 0;
+}
+
+static void service_kcqes(struct cnic_dev *dev, int num_cqes)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int i, j;
+
+ i = 0;
+ j = 1;
+ while (num_cqes) {
+ struct cnic_ulp_ops *ulp_ops;
+ int ulp_type;
+ u32 kcqe_op_flag = cp->completed_kcq[i]->kcqe_op_flag;
+ u32 kcqe_layer = kcqe_op_flag & KCQE_FLAGS_LAYER_MASK;
+
+ if (unlikely(kcqe_op_flag & KCQE_RAMROD_COMPLETION))
+ cnic_kwq_completion(dev, 1);
+
+ while (j < num_cqes) {
+ u32 next_op = cp->completed_kcq[i + j]->kcqe_op_flag;
+
+ if ((next_op & KCQE_FLAGS_LAYER_MASK) != kcqe_layer)
+ break;
+
+ if (unlikely(next_op & KCQE_RAMROD_COMPLETION))
+ cnic_kwq_completion(dev, 1);
+ j++;
+ }
+
+ if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_RDMA)
+ ulp_type = CNIC_ULP_RDMA;
+ else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_ISCSI)
+ ulp_type = CNIC_ULP_ISCSI;
+ else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L4)
+ ulp_type = CNIC_ULP_L4;
+ else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L2)
+ goto end;
+ else {
+ printk(KERN_ERR PFX "%s: Unknown type of KCQE(0x%x)\n",
+ dev->netdev->name, kcqe_op_flag);
+ goto end;
+ }
+
+ rcu_read_lock();
+ ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+ if (likely(ulp_ops)) {
+ ulp_ops->indicate_kcqes(cp->ulp_handle[ulp_type],
+ cp->completed_kcq + i, j);
+ }
+ rcu_read_unlock();
+end:
+ num_cqes -= j;
+ i += j;
+ j = 1;
+ }
+ return;
+}
+
+static u16 cnic_bnx2_next_idx(u16 idx)
+{
+ return idx + 1;
+}
+
+static u16 cnic_bnx2_hw_idx(u16 idx)
+{
+ return idx;
+}
+
+static int cnic_get_kcqes(struct cnic_dev *dev, u16 hw_prod, u16 *sw_prod)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ u16 i, ri, last;
+ struct kcqe *kcqe;
+ int kcqe_cnt = 0, last_cnt = 0;
+
+ i = ri = last = *sw_prod;
+ ri &= MAX_KCQ_IDX;
+
+ while ((i != hw_prod) && (kcqe_cnt < MAX_COMPLETED_KCQE)) {
+ kcqe = &cp->kcq[KCQ_PG(ri)][KCQ_IDX(ri)];
+ cp->completed_kcq[kcqe_cnt++] = kcqe;
+ i = cp->next_idx(i);
+ ri = i & MAX_KCQ_IDX;
+ if (likely(!(kcqe->kcqe_op_flag & KCQE_FLAGS_NEXT))) {
+ last_cnt = kcqe_cnt;
+ last = i;
+ }
+ }
+
+ *sw_prod = last;
+ return last_cnt;
+}
+
+static void cnic_chk_bnx2_pkt_rings(struct cnic_local *cp)
+{
+ u16 rx_cons = *cp->rx_cons_ptr;
+ u16 tx_cons = *cp->tx_cons_ptr;
+
+ if (cp->tx_cons != tx_cons || cp->rx_cons != rx_cons) {
+ cp->tx_cons = tx_cons;
+ cp->rx_cons = rx_cons;
+ uio_event_notify(cp->cnic_uinfo);
+ }
+}
+
+static int cnic_service_bnx2(void *data, void *status_blk)
+{
+ struct cnic_dev *dev = data;
+ struct status_block *sblk = status_blk;
+ struct cnic_local *cp = dev->cnic_priv;
+ u32 status_idx = sblk->status_idx;
+ u16 hw_prod, sw_prod;
+ int kcqe_cnt;
+
+ if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+ return status_idx;
+
+ cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+
+ hw_prod = sblk->status_completion_producer_index;
+ sw_prod = cp->kcq_prod_idx;
+ while (sw_prod != hw_prod) {
+ kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+ if (kcqe_cnt == 0)
+ goto done;
+
+ service_kcqes(dev, kcqe_cnt);
+
+ /* Tell compiler that status_blk fields can change. */
+ barrier();
+ if (status_idx != sblk->status_idx) {
+ status_idx = sblk->status_idx;
+ cp->kwq_con_idx = *cp->kwq_con_idx_ptr;
+ hw_prod = sblk->status_completion_producer_index;
+ } else
+ break;
+ }
+
+done:
+ CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+
+ cp->kcq_prod_idx = sw_prod;
+
+ cnic_chk_bnx2_pkt_rings(cp);
+ return status_idx;
+}
+
+static void cnic_service_bnx2_msix(unsigned long data)
+{
+ struct cnic_dev *dev = (struct cnic_dev *) data;
+ struct cnic_local *cp = dev->cnic_priv;
+ struct status_block_msix *status_blk = cp->bnx2_status_blk;
+ u32 status_idx = status_blk->status_idx;
+ u16 hw_prod, sw_prod;
+ int kcqe_cnt;
+
+ cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+
+ hw_prod = status_blk->status_completion_producer_index;
+ sw_prod = cp->kcq_prod_idx;
+ while (sw_prod != hw_prod) {
+ kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+ if (kcqe_cnt == 0)
+ goto done;
+
+ service_kcqes(dev, kcqe_cnt);
+
+ /* Tell compiler that status_blk fields can change. */
+ barrier();
+ if (status_idx != status_blk->status_idx) {
+ status_idx = status_blk->status_idx;
+ cp->kwq_con_idx = status_blk->status_cmd_consumer_index;
+ hw_prod = status_blk->status_completion_producer_index;
+ } else
+ break;
+ }
+
+done:
+ CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
+ cp->kcq_prod_idx = sw_prod;
+
+ cnic_chk_bnx2_pkt_rings(cp);
+
+ cp->last_status_idx = status_idx;
+ CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static irqreturn_t cnic_irq(int irq, void *dev_instance)
+{
+ struct cnic_dev *dev = dev_instance;
+ struct cnic_local *cp = dev->cnic_priv;
+ u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
+
+ if (cp->ack_int)
+ cp->ack_int(dev);
+
+ prefetch(cp->status_blk);
+ prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
+
+ if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+ tasklet_schedule(&cp->cnic_irq_task);
+
+ return IRQ_HANDLED;
+}
+
+static void cnic_ulp_stop(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int if_type;
+
+ rcu_read_lock();
+ for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+ struct cnic_ulp_ops *ulp_ops;
+
+ ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+ if (!ulp_ops)
+ continue;
+
+ if (test_and_clear_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+ ulp_ops->cnic_stop(cp->ulp_handle[if_type]);
+ }
+ rcu_read_unlock();
+}
+
+static void cnic_ulp_start(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int if_type;
+
+ rcu_read_lock();
+ for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+ struct cnic_ulp_ops *ulp_ops;
+
+ ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+ if (!ulp_ops || !ulp_ops->cnic_start)
+ continue;
+
+ if (!test_and_set_bit(ULP_F_START, &cp->ulp_flags[if_type]))
+ ulp_ops->cnic_start(cp->ulp_handle[if_type]);
+ }
+ rcu_read_unlock();
+}
+
+static int cnic_ctl(void *data, struct cnic_ctl_info *info)
+{
+ struct cnic_dev *dev = data;
+
+ switch (info->cmd) {
+ case CNIC_CTL_STOP_CMD:
+ cnic_hold(dev);
+ mutex_lock(&cnic_lock);
+
+ cnic_ulp_stop(dev);
+ cnic_stop_hw(dev);
+
+ mutex_unlock(&cnic_lock);
+ cnic_put(dev);
+ break;
+ case CNIC_CTL_START_CMD:
+ cnic_hold(dev);
+ mutex_lock(&cnic_lock);
+
+ if (!cnic_start_hw(dev))
+ cnic_ulp_start(dev);
+
+ mutex_unlock(&cnic_lock);
+ cnic_put(dev);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void cnic_ulp_init(struct cnic_dev *dev)
+{
+ int i;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ rcu_read_lock();
+ for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+ struct cnic_ulp_ops *ulp_ops;
+
+ ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+ if (!ulp_ops || !ulp_ops->cnic_init)
+ continue;
+
+ if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+ ulp_ops->cnic_init(dev);
+
+ }
+ rcu_read_unlock();
+}
+
+static void cnic_ulp_exit(struct cnic_dev *dev)
+{
+ int i;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ rcu_read_lock();
+ for (i = 0; i < MAX_CNIC_ULP_TYPE_EXT; i++) {
+ struct cnic_ulp_ops *ulp_ops;
+
+ ulp_ops = rcu_dereference(cnic_ulp_tbl[i]);
+ if (!ulp_ops || !ulp_ops->cnic_exit)
+ continue;
+
+ if (test_and_clear_bit(ULP_F_INIT, &cp->ulp_flags[i]))
+ ulp_ops->cnic_exit(dev);
+
+ }
+ rcu_read_unlock();
+}
+
+static int cnic_cm_offload_pg(struct cnic_sock *csk)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct l4_kwq_offload_pg *l4kwqe;
+ struct kwqe *wqes[1];
+
+ l4kwqe = (struct l4_kwq_offload_pg *) &csk->kwqe1;
+ memset(l4kwqe, 0, sizeof(*l4kwqe));
+ wqes[0] = (struct kwqe *) l4kwqe;
+
+ l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_OFFLOAD_PG;
+ l4kwqe->flags =
+ L4_LAYER_CODE << L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT;
+ l4kwqe->l2hdr_nbytes = ETH_HLEN;
+
+ l4kwqe->da0 = csk->ha[0];
+ l4kwqe->da1 = csk->ha[1];
+ l4kwqe->da2 = csk->ha[2];
+ l4kwqe->da3 = csk->ha[3];
+ l4kwqe->da4 = csk->ha[4];
+ l4kwqe->da5 = csk->ha[5];
+
+ l4kwqe->sa0 = dev->mac_addr[0];
+ l4kwqe->sa1 = dev->mac_addr[1];
+ l4kwqe->sa2 = dev->mac_addr[2];
+ l4kwqe->sa3 = dev->mac_addr[3];
+ l4kwqe->sa4 = dev->mac_addr[4];
+ l4kwqe->sa5 = dev->mac_addr[5];
+
+ l4kwqe->etype = ETH_P_IP;
+ l4kwqe->ipid_count = DEF_IPID_COUNT;
+ l4kwqe->host_opaque = csk->l5_cid;
+
+ if (csk->vlan_id) {
+ l4kwqe->pg_flags |= L4_KWQ_OFFLOAD_PG_VLAN_TAGGING;
+ l4kwqe->vlan_tag = csk->vlan_id;
+ l4kwqe->l2hdr_nbytes += 4;
+ }
+
+ return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_update_pg(struct cnic_sock *csk)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct l4_kwq_update_pg *l4kwqe;
+ struct kwqe *wqes[1];
+
+ l4kwqe = (struct l4_kwq_update_pg *) &csk->kwqe1;
+ memset(l4kwqe, 0, sizeof(*l4kwqe));
+ wqes[0] = (struct kwqe *) l4kwqe;
+
+ l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPDATE_PG;
+ l4kwqe->flags =
+ L4_LAYER_CODE << L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT;
+ l4kwqe->pg_cid = csk->pg_cid;
+
+ l4kwqe->da0 = csk->ha[0];
+ l4kwqe->da1 = csk->ha[1];
+ l4kwqe->da2 = csk->ha[2];
+ l4kwqe->da3 = csk->ha[3];
+ l4kwqe->da4 = csk->ha[4];
+ l4kwqe->da5 = csk->ha[5];
+
+ l4kwqe->pg_host_opaque = csk->l5_cid;
+ l4kwqe->pg_valids = L4_KWQ_UPDATE_PG_VALIDS_DA;
+
+ return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_upload_pg(struct cnic_sock *csk)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct l4_kwq_upload *l4kwqe;
+ struct kwqe *wqes[1];
+
+ l4kwqe = (struct l4_kwq_upload *) &csk->kwqe1;
+ memset(l4kwqe, 0, sizeof(*l4kwqe));
+ wqes[0] = (struct kwqe *) l4kwqe;
+
+ l4kwqe->opcode = L4_KWQE_OPCODE_VALUE_UPLOAD_PG;
+ l4kwqe->flags =
+ L4_LAYER_CODE << L4_KWQ_UPLOAD_LAYER_CODE_SHIFT;
+ l4kwqe->cid = csk->pg_cid;
+
+ return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_conn_req(struct cnic_sock *csk)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct l4_kwq_connect_req1 *l4kwqe1;
+ struct l4_kwq_connect_req2 *l4kwqe2;
+ struct l4_kwq_connect_req3 *l4kwqe3;
+ struct kwqe *wqes[3];
+ u8 tcp_flags = 0;
+ int num_wqes = 2;
+
+ l4kwqe1 = (struct l4_kwq_connect_req1 *) &csk->kwqe1;
+ l4kwqe2 = (struct l4_kwq_connect_req2 *) &csk->kwqe2;
+ l4kwqe3 = (struct l4_kwq_connect_req3 *) &csk->kwqe3;
+ memset(l4kwqe1, 0, sizeof(*l4kwqe1));
+ memset(l4kwqe2, 0, sizeof(*l4kwqe2));
+ memset(l4kwqe3, 0, sizeof(*l4kwqe3));
+
+ l4kwqe3->op_code = L4_KWQE_OPCODE_VALUE_CONNECT3;
+ l4kwqe3->flags =
+ L4_LAYER_CODE << L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT;
+ l4kwqe3->ka_timeout = csk->ka_timeout;
+ l4kwqe3->ka_interval = csk->ka_interval;
+ l4kwqe3->ka_max_probe_count = csk->ka_max_probe_count;
+ l4kwqe3->tos = csk->tos;
+ l4kwqe3->ttl = csk->ttl;
+ l4kwqe3->snd_seq_scale = csk->snd_seq_scale;
+ l4kwqe3->pmtu = csk->mtu;
+ l4kwqe3->rcv_buf = csk->rcv_buf;
+ l4kwqe3->snd_buf = csk->snd_buf;
+ l4kwqe3->seed = csk->seed;
+
+ wqes[0] = (struct kwqe *) l4kwqe1;
+ if (test_bit(SK_F_IPV6, &csk->flags)) {
+ wqes[1] = (struct kwqe *) l4kwqe2;
+ wqes[2] = (struct kwqe *) l4kwqe3;
+ num_wqes = 3;
+
+ l4kwqe1->conn_flags = L4_KWQ_CONNECT_REQ1_IP_V6;
+ l4kwqe2->op_code = L4_KWQE_OPCODE_VALUE_CONNECT2;
+ l4kwqe2->flags =
+ L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT |
+ L4_LAYER_CODE << L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT;
+ l4kwqe2->src_ip_v6_2 = be32_to_cpu(csk->src_ip[1]);
+ l4kwqe2->src_ip_v6_3 = be32_to_cpu(csk->src_ip[2]);
+ l4kwqe2->src_ip_v6_4 = be32_to_cpu(csk->src_ip[3]);
+ l4kwqe2->dst_ip_v6_2 = be32_to_cpu(csk->dst_ip[1]);
+ l4kwqe2->dst_ip_v6_3 = be32_to_cpu(csk->dst_ip[2]);
+ l4kwqe2->dst_ip_v6_4 = be32_to_cpu(csk->dst_ip[3]);
+ l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct ipv6hdr) -
+ sizeof(struct tcphdr);
+ } else {
+ wqes[1] = (struct kwqe *) l4kwqe3;
+ l4kwqe3->mss = l4kwqe3->pmtu - sizeof(struct iphdr) -
+ sizeof(struct tcphdr);
+ }
+
+ l4kwqe1->op_code = L4_KWQE_OPCODE_VALUE_CONNECT1;
+ l4kwqe1->flags =
+ (L4_LAYER_CODE << L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT) |
+ L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT;
+ l4kwqe1->cid = csk->cid;
+ l4kwqe1->pg_cid = csk->pg_cid;
+ l4kwqe1->src_ip = be32_to_cpu(csk->src_ip[0]);
+ l4kwqe1->dst_ip = be32_to_cpu(csk->dst_ip[0]);
+ l4kwqe1->src_port = be16_to_cpu(csk->src_port);
+ l4kwqe1->dst_port = be16_to_cpu(csk->dst_port);
+ if (csk->tcp_flags & SK_TCP_NO_DELAY_ACK)
+ tcp_flags |= L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK;
+ if (csk->tcp_flags & SK_TCP_KEEP_ALIVE)
+ tcp_flags |= L4_KWQ_CONNECT_REQ1_KEEP_ALIVE;
+ if (csk->tcp_flags & SK_TCP_NAGLE)
+ tcp_flags |= L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE;
+ if (csk->tcp_flags & SK_TCP_TIMESTAMP)
+ tcp_flags |= L4_KWQ_CONNECT_REQ1_TIME_STAMP;
+ if (csk->tcp_flags & SK_TCP_SACK)
+ tcp_flags |= L4_KWQ_CONNECT_REQ1_SACK;
+ if (csk->tcp_flags & SK_TCP_SEG_SCALING)
+ tcp_flags |= L4_KWQ_CONNECT_REQ1_SEG_SCALING;
+
+ l4kwqe1->tcp_flags = tcp_flags;
+
+ return dev->submit_kwqes(dev, wqes, num_wqes);
+}
+
+static int cnic_cm_close_req(struct cnic_sock *csk)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct l4_kwq_close_req *l4kwqe;
+ struct kwqe *wqes[1];
+
+ l4kwqe = (struct l4_kwq_close_req *) &csk->kwqe2;
+ memset(l4kwqe, 0, sizeof(*l4kwqe));
+ wqes[0] = (struct kwqe *) l4kwqe;
+
+ l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_CLOSE;
+ l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT;
+ l4kwqe->cid = csk->cid;
+
+ return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_abort_req(struct cnic_sock *csk)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct l4_kwq_reset_req *l4kwqe;
+ struct kwqe *wqes[1];
+
+ l4kwqe = (struct l4_kwq_reset_req *) &csk->kwqe2;
+ memset(l4kwqe, 0, sizeof(*l4kwqe));
+ wqes[0] = (struct kwqe *) l4kwqe;
+
+ l4kwqe->op_code = L4_KWQE_OPCODE_VALUE_RESET;
+ l4kwqe->flags = L4_LAYER_CODE << L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT;
+ l4kwqe->cid = csk->cid;
+
+ return dev->submit_kwqes(dev, wqes, 1);
+}
+
+static int cnic_cm_create(struct cnic_dev *dev, int ulp_type, u32 cid,
+ u32 l5_cid, struct cnic_sock **csk, void *context)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_sock *csk1;
+
+ if (l5_cid >= MAX_CM_SK_TBL_SZ)
+ return -EINVAL;
+
+ csk1 = &cp->csk_tbl[l5_cid];
+ if (atomic_read(&csk1->ref_count))
+ return -EAGAIN;
+
+ if (test_and_set_bit(SK_F_INUSE, &csk1->flags))
+ return -EBUSY;
+
+ csk1->dev = dev;
+ csk1->cid = cid;
+ csk1->l5_cid = l5_cid;
+ csk1->ulp_type = ulp_type;
+ csk1->context = context;
+
+ csk1->ka_timeout = DEF_KA_TIMEOUT;
+ csk1->ka_interval = DEF_KA_INTERVAL;
+ csk1->ka_max_probe_count = DEF_KA_MAX_PROBE_COUNT;
+ csk1->tos = DEF_TOS;
+ csk1->ttl = DEF_TTL;
+ csk1->snd_seq_scale = DEF_SND_SEQ_SCALE;
+ csk1->rcv_buf = DEF_RCV_BUF;
+ csk1->snd_buf = DEF_SND_BUF;
+ csk1->seed = DEF_SEED;
+
+ *csk = csk1;
+ return 0;
+}
+
+static void cnic_cm_cleanup(struct cnic_sock *csk)
+{
+ if (csk->src_port) {
+ struct cnic_dev *dev = csk->dev;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ cnic_free_id(&cp->csk_port_tbl, csk->src_port);
+ csk->src_port = 0;
+ }
+}
+
+static void cnic_close_conn(struct cnic_sock *csk)
+{
+ if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags)) {
+ cnic_cm_upload_pg(csk);
+ clear_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+ }
+ cnic_cm_cleanup(csk);
+}
+
+static int cnic_cm_destroy(struct cnic_sock *csk)
+{
+ if (!cnic_in_use(csk))
+ return -EINVAL;
+
+ csk_hold(csk);
+ clear_bit(SK_F_INUSE, &csk->flags);
+ smp_mb__after_clear_bit();
+ while (atomic_read(&csk->ref_count) != 1)
+ msleep(1);
+ cnic_cm_cleanup(csk);
+
+ csk->flags = 0;
+ csk_put(csk);
+ return 0;
+}
+
+static inline u16 cnic_get_vlan(struct net_device *dev,
+ struct net_device **vlan_dev)
+{
+ if (dev->priv_flags & IFF_802_1Q_VLAN) {
+ *vlan_dev = vlan_dev_real_dev(dev);
+ return vlan_dev_vlan_id(dev);
+ }
+ *vlan_dev = dev;
+ return 0;
+}
+
+static int cnic_get_v4_route(struct sockaddr_in *dst_addr,
+ struct dst_entry **dst)
+{
+ struct flowi fl;
+ int err;
+ struct rtable *rt;
+
+ memset(&fl, 0, sizeof(fl));
+ fl.nl_u.ip4_u.daddr = dst_addr->sin_addr.s_addr;
+
+ err = ip_route_output_key(&init_net, &rt, &fl);
+ if (!err)
+ *dst = &rt->u.dst;
+ return err;
+}
+
+static int cnic_get_v6_route(struct sockaddr_in6 *dst_addr,
+ struct dst_entry **dst)
+{
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ struct flowi fl;
+
+ memset(&fl, 0, sizeof(fl));
+ ipv6_addr_copy(&fl.fl6_dst, &dst_addr->sin6_addr);
+ if (ipv6_addr_type(&fl.fl6_dst) & IPV6_ADDR_LINKLOCAL)
+ fl.oif = dst_addr->sin6_scope_id;
+
+ *dst = ip6_route_output(&init_net, NULL, &fl);
+ if (*dst)
+ return 0;
+#endif
+
+ return -ENETUNREACH;
+}
+
+static struct cnic_dev *cnic_cm_select_dev(struct sockaddr_in *dst_addr,
+ int ulp_type)
+{
+ struct cnic_dev *dev = NULL;
+ struct dst_entry *dst;
+ struct net_device *netdev = NULL;
+ int err = -ENETUNREACH;
+
+ if (dst_addr->sin_family == AF_INET)
+ err = cnic_get_v4_route(dst_addr, &dst);
+ else if (dst_addr->sin_family == AF_INET6) {
+ struct sockaddr_in6 *dst_addr6 =
+ (struct sockaddr_in6 *) dst_addr;
+
+ err = cnic_get_v6_route(dst_addr6, &dst);
+ } else
+ return NULL;
+
+ if (err)
+ return NULL;
+
+ if (!dst->dev)
+ goto done;
+
+ cnic_get_vlan(dst->dev, &netdev);
+
+ dev = cnic_from_netdev(netdev);
+
+done:
+ dst_release(dst);
+ if (dev)
+ cnic_put(dev);
+ return dev;
+}
+
+static int cnic_resolve_addr(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ return cnic_send_nlmsg(cp, ISCSI_KEVENT_PATH_REQ, csk);
+}
+
+static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct cnic_local *cp = dev->cnic_priv;
+ int is_v6, err, rc = -ENETUNREACH;
+ struct dst_entry *dst;
+ struct net_device *realdev;
+ u32 local_port;
+
+ if (saddr->local.v6.sin6_family == AF_INET6 &&
+ saddr->remote.v6.sin6_family == AF_INET6)
+ is_v6 = 1;
+ else if (saddr->local.v4.sin_family == AF_INET &&
+ saddr->remote.v4.sin_family == AF_INET)
+ is_v6 = 0;
+ else
+ return -EINVAL;
+
+ clear_bit(SK_F_IPV6, &csk->flags);
+
+ if (is_v6) {
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+ set_bit(SK_F_IPV6, &csk->flags);
+ err = cnic_get_v6_route(&saddr->remote.v6, &dst);
+ if (err)
+ return err;
+
+ if (!dst || dst->error || !dst->dev)
+ goto err_out;
+
+ memcpy(&csk->dst_ip[0], &saddr->remote.v6.sin6_addr,
+ sizeof(struct in6_addr));
+ csk->dst_port = saddr->remote.v6.sin6_port;
+ local_port = saddr->local.v6.sin6_port;
+#else
+ return rc;
+#endif
+
+ } else {
+ err = cnic_get_v4_route(&saddr->remote.v4, &dst);
+ if (err)
+ return err;
+
+ if (!dst || dst->error || !dst->dev)
+ goto err_out;
+
+ csk->dst_ip[0] = saddr->remote.v4.sin_addr.s_addr;
+ csk->dst_port = saddr->remote.v4.sin_port;
+ local_port = saddr->local.v4.sin_port;
+ }
+
+ csk->vlan_id = cnic_get_vlan(dst->dev, &realdev);
+ if (realdev != dev->netdev)
+ goto err_out;
+
+ if (local_port >= CNIC_LOCAL_PORT_MIN &&
+ local_port < CNIC_LOCAL_PORT_MAX) {
+ if (cnic_alloc_id(&cp->csk_port_tbl, local_port))
+ local_port = 0;
+ } else
+ local_port = 0;
+
+ if (!local_port) {
+ local_port = cnic_alloc_new_id(&cp->csk_port_tbl);
+ if (local_port == -1) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ }
+ csk->src_port = local_port;
+
+ csk->mtu = dst_mtu(dst);
+ rc = 0;
+
+err_out:
+ dst_release(dst);
+ return rc;
+}
+
+static void cnic_init_csk_state(struct cnic_sock *csk)
+{
+ csk->state = 0;
+ clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+ clear_bit(SK_F_CLOSING, &csk->flags);
+}
+
+static int cnic_cm_connect(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
+{
+ int err = 0;
+
+ if (!cnic_in_use(csk))
+ return -EINVAL;
+
+ if (test_and_set_bit(SK_F_CONNECT_START, &csk->flags))
+ return -EINVAL;
+
+ cnic_init_csk_state(csk);
+
+ err = cnic_get_route(csk, saddr);
+ if (err)
+ goto err_out;
+
+ err = cnic_resolve_addr(csk, saddr);
+ if (!err)
+ return 0;
+
+err_out:
+ clear_bit(SK_F_CONNECT_START, &csk->flags);
+ return err;
+}
+
+static int cnic_cm_abort(struct cnic_sock *csk)
+{
+ struct cnic_local *cp = csk->dev->cnic_priv;
+ u32 opcode;
+
+ if (!cnic_in_use(csk))
+ return -EINVAL;
+
+ if (cnic_abort_prep(csk))
+ return cnic_cm_abort_req(csk);
+
+ /* Getting here means that we haven't started connect, or
+ * connect was not successful.
+ */
+
+ csk->state = L4_KCQE_OPCODE_VALUE_RESET_COMP;
+ if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+ opcode = csk->state;
+ else
+ opcode = L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD;
+ cp->close_conn(csk, opcode);
+
+ return 0;
+}
+
+static int cnic_cm_close(struct cnic_sock *csk)
+{
+ if (!cnic_in_use(csk))
+ return -EINVAL;
+
+ if (cnic_close_prep(csk)) {
+ csk->state = L4_KCQE_OPCODE_VALUE_CLOSE_COMP;
+ return cnic_cm_close_req(csk);
+ }
+ return 0;
+}
+
+static void cnic_cm_upcall(struct cnic_local *cp, struct cnic_sock *csk,
+ u8 opcode)
+{
+ struct cnic_ulp_ops *ulp_ops;
+ int ulp_type = csk->ulp_type;
+
+ rcu_read_lock();
+ ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+ if (ulp_ops) {
+ if (opcode == L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE)
+ ulp_ops->cm_connect_complete(csk);
+ else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)
+ ulp_ops->cm_close_complete(csk);
+ else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED)
+ ulp_ops->cm_remote_abort(csk);
+ else if (opcode == L4_KCQE_OPCODE_VALUE_RESET_COMP)
+ ulp_ops->cm_abort_complete(csk);
+ else if (opcode == L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED)
+ ulp_ops->cm_remote_close(csk);
+ }
+ rcu_read_unlock();
+}
+
+static int cnic_cm_set_pg(struct cnic_sock *csk)
+{
+ if (cnic_offld_prep(csk)) {
+ if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags))
+ cnic_cm_update_pg(csk);
+ else
+ cnic_cm_offload_pg(csk);
+ }
+ return 0;
+}
+
+static void cnic_cm_process_offld_pg(struct cnic_dev *dev, struct l4_kcq *kcqe)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ u32 l5_cid = kcqe->pg_host_opaque;
+ u8 opcode = kcqe->op_code;
+ struct cnic_sock *csk = &cp->csk_tbl[l5_cid];
+
+ csk_hold(csk);
+ if (!cnic_in_use(csk))
+ goto done;
+
+ if (opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+ clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+ goto done;
+ }
+ csk->pg_cid = kcqe->pg_cid;
+ set_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags);
+ cnic_cm_conn_req(csk);
+
+done:
+ csk_put(csk);
+}
+
+static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct l4_kcq *l4kcqe = (struct l4_kcq *) kcqe;
+ u8 opcode = l4kcqe->op_code;
+ u32 l5_cid;
+ struct cnic_sock *csk;
+
+ if (opcode == L4_KCQE_OPCODE_VALUE_OFFLOAD_PG ||
+ opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
+ cnic_cm_process_offld_pg(dev, l4kcqe);
+ return;
+ }
+
+ l5_cid = l4kcqe->conn_id;
+ if (opcode & 0x80)
+ l5_cid = l4kcqe->cid;
+ if (l5_cid >= MAX_CM_SK_TBL_SZ)
+ return;
+
+ csk = &cp->csk_tbl[l5_cid];
+ csk_hold(csk);
+
+ if (!cnic_in_use(csk)) {
+ csk_put(csk);
+ return;
+ }
+
+ switch (opcode) {
+ case L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE:
+ if (l4kcqe->status == 0)
+ set_bit(SK_F_OFFLD_COMPLETE, &csk->flags);
+
+ smp_mb__before_clear_bit();
+ clear_bit(SK_F_OFFLD_SCHED, &csk->flags);
+ cnic_cm_upcall(cp, csk, opcode);
+ break;
+
+ case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED:
+ if (test_and_clear_bit(SK_F_OFFLD_COMPLETE, &csk->flags))
+ csk->state = opcode;
+ /* fall through */
+ case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
+ case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+ cp->close_conn(csk, opcode);
+ break;
+
+ case L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED:
+ cnic_cm_upcall(cp, csk, opcode);
+ break;
+ }
+ csk_put(csk);
+}
+
+static void cnic_cm_indicate_kcqe(void *data, struct kcqe *kcqe[], u32 num)
+{
+ struct cnic_dev *dev = data;
+ int i;
+
+ for (i = 0; i < num; i++)
+ cnic_cm_process_kcqe(dev, kcqe[i]);
+}
+
+static struct cnic_ulp_ops cm_ulp_ops = {
+ .indicate_kcqes = cnic_cm_indicate_kcqe,
+};
+
+static void cnic_cm_free_mem(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+
+ kfree(cp->csk_tbl);
+ cp->csk_tbl = NULL;
+ cnic_free_id_tbl(&cp->csk_port_tbl);
+}
+
+static int cnic_cm_alloc_mem(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+
+ cp->csk_tbl = kzalloc(sizeof(struct cnic_sock) * MAX_CM_SK_TBL_SZ,
+ GFP_KERNEL);
+ if (!cp->csk_tbl)
+ return -ENOMEM;
+
+ if (cnic_init_id_tbl(&cp->csk_port_tbl, CNIC_LOCAL_PORT_RANGE,
+ CNIC_LOCAL_PORT_MIN)) {
+ cnic_cm_free_mem(dev);
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static int cnic_ready_to_close(struct cnic_sock *csk, u32 opcode)
+{
+ if ((opcode == csk->state) ||
+ (opcode == L4_KCQE_OPCODE_VALUE_RESET_RECEIVED &&
+ csk->state == L4_KCQE_OPCODE_VALUE_CLOSE_COMP)) {
+ if (!test_and_set_bit(SK_F_CLOSING, &csk->flags))
+ return 1;
+ }
+ return 0;
+}
+
+static void cnic_close_bnx2_conn(struct cnic_sock *csk, u32 opcode)
+{
+ struct cnic_dev *dev = csk->dev;
+ struct cnic_local *cp = dev->cnic_priv;
+
+ clear_bit(SK_F_CONNECT_START, &csk->flags);
+ if (cnic_ready_to_close(csk, opcode)) {
+ cnic_close_conn(csk);
+ cnic_cm_upcall(cp, csk, opcode);
+ }
+}
+
+static void cnic_cm_stop_bnx2_hw(struct cnic_dev *dev)
+{
+}
+
+static int cnic_cm_init_bnx2_hw(struct cnic_dev *dev)
+{
+ u32 seed;
+
+ get_random_bytes(&seed, 4);
+ cnic_ctx_wr(dev, 45, 0, seed);
+ return 0;
+}
+
+static int cnic_cm_open(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int err;
+
+ err = cnic_cm_alloc_mem(dev);
+ if (err)
+ return err;
+
+ err = cp->start_cm(dev);
+
+ if (err)
+ goto err_out;
+
+ dev->cm_create = cnic_cm_create;
+ dev->cm_destroy = cnic_cm_destroy;
+ dev->cm_connect = cnic_cm_connect;
+ dev->cm_abort = cnic_cm_abort;
+ dev->cm_close = cnic_cm_close;
+ dev->cm_select_dev = cnic_cm_select_dev;
+
+ cp->ulp_handle[CNIC_ULP_L4] = dev;
+ rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], &cm_ulp_ops);
+ return 0;
+
+err_out:
+ cnic_cm_free_mem(dev);
+ return err;
+}
+
+static int cnic_cm_shutdown(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int i;
+
+ cp->stop_cm(dev);
+
+ if (!cp->csk_tbl)
+ return 0;
+
+ for (i = 0; i < MAX_CM_SK_TBL_SZ; i++) {
+ struct cnic_sock *csk = &cp->csk_tbl[i];
+
+ clear_bit(SK_F_INUSE, &csk->flags);
+ cnic_cm_cleanup(csk);
+ }
+ cnic_cm_free_mem(dev);
+
+ return 0;
+}
+
+static void cnic_init_context(struct cnic_dev *dev, u32 cid)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ u32 cid_addr;
+ int i;
+
+ if (CHIP_NUM(cp) == CHIP_NUM_5709)
+ return;
+
+ cid_addr = GET_CID_ADDR(cid);
+
+ for (i = 0; i < CTX_SIZE; i += 4)
+ cnic_ctx_wr(dev, cid_addr, i, 0);
+}
+
+static int cnic_setup_5709_context(struct cnic_dev *dev, int valid)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ int ret = 0, i;
+ u32 valid_bit = valid ? BNX2_CTX_HOST_PAGE_TBL_DATA0_VALID : 0;
+
+ if (CHIP_NUM(cp) != CHIP_NUM_5709)
+ return 0;
+
+ for (i = 0; i < cp->ctx_blks; i++) {
+ int j;
+ u32 idx = cp->ctx_arr[i].cid / cp->cids_per_blk;
+ u32 val;
+
+ memset(cp->ctx_arr[i].ctx, 0, BCM_PAGE_SIZE);
+
+ CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA0,
+ (cp->ctx_arr[i].mapping & 0xffffffff) | valid_bit);
+ CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_DATA1,
+ (u64) cp->ctx_arr[i].mapping >> 32);
+ CNIC_WR(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL, idx |
+ BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ);
+ for (j = 0; j < 10; j++) {
+
+ val = CNIC_RD(dev, BNX2_CTX_HOST_PAGE_TBL_CTRL);
+ if (!(val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ))
+ break;
+ udelay(5);
+ }
+ if (val & BNX2_CTX_HOST_PAGE_TBL_CTRL_WRITE_REQ) {
+ ret = -EBUSY;
+ break;
+ }
+ }
+ return ret;
+}
+
+static void cnic_free_irq(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+
+ if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+ cp->disable_int_sync(dev);
+ tasklet_disable(&cp->cnic_irq_task);
+ free_irq(ethdev->irq_arr[0].vector, dev);
+ }
+}
+
+static int cnic_init_bnx2_irq(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+
+ if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+ int err, i = 0;
+ int sblk_num = cp->status_blk_num;
+ u32 base = ((sblk_num - 1) * BNX2_HC_SB_CONFIG_SIZE) +
+ BNX2_HC_SB_CONFIG_1;
+
+ CNIC_WR(dev, base, BNX2_HC_SB_CONFIG_1_ONE_SHOT);
+
+ CNIC_WR(dev, base + BNX2_HC_COMP_PROD_TRIP_OFF, (2 << 16) | 8);
+ CNIC_WR(dev, base + BNX2_HC_COM_TICKS_OFF, (64 << 16) | 220);
+ CNIC_WR(dev, base + BNX2_HC_CMD_TICKS_OFF, (64 << 16) | 220);
+
+ cp->bnx2_status_blk = cp->status_blk;
+ cp->last_status_idx = cp->bnx2_status_blk->status_idx;
+ tasklet_init(&cp->cnic_irq_task, &cnic_service_bnx2_msix,
+ (unsigned long) dev);
+ err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
+ "cnic", dev);
+ if (err) {
+ tasklet_disable(&cp->cnic_irq_task);
+ return err;
+ }
+ while (cp->bnx2_status_blk->status_completion_producer_index &&
+ i < 10) {
+ CNIC_WR(dev, BNX2_HC_COALESCE_NOW,
+ 1 << (11 + sblk_num));
+ udelay(10);
+ i++;
+ barrier();
+ }
+ if (cp->bnx2_status_blk->status_completion_producer_index) {
+ cnic_free_irq(dev);
+ goto failed;
+ }
+
+ } else {
+ struct status_block *sblk = cp->status_blk;
+ u32 hc_cmd = CNIC_RD(dev, BNX2_HC_COMMAND);
+ int i = 0;
+
+ while (sblk->status_completion_producer_index && i < 10) {
+ CNIC_WR(dev, BNX2_HC_COMMAND,
+ hc_cmd | BNX2_HC_COMMAND_COAL_NOW_WO_INT);
+ udelay(10);
+ i++;
+ barrier();
+ }
+ if (sblk->status_completion_producer_index)
+ goto failed;
+
+ }
+ return 0;
+
+failed:
+ printk(KERN_ERR PFX "%s: " "KCQ index not resetting to 0.\n",
+ dev->netdev->name);
+ return -EBUSY;
+}
+
+static void cnic_enable_bnx2_int(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+
+ if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+ return;
+
+ CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+ BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | cp->last_status_idx);
+}
+
+static void cnic_disable_bnx2_int_sync(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+
+ if (!(ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX))
+ return;
+
+ CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
+ BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+ CNIC_RD(dev, BNX2_PCICFG_INT_ACK_CMD);
+ synchronize_irq(ethdev->irq_arr[0].vector);
+}
+
+static void cnic_init_bnx2_tx_ring(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ u32 cid_addr, tx_cid, sb_id;
+ u32 val, offset0, offset1, offset2, offset3;
+ int i;
+ struct tx_bd *txbd;
+ dma_addr_t buf_map;
+ struct status_block *s_blk = cp->status_blk;
+
+ sb_id = cp->status_blk_num;
+ tx_cid = 20;
+ cnic_init_context(dev, tx_cid);
+ cnic_init_context(dev, tx_cid + 1);
+ cp->tx_cons_ptr = &s_blk->status_tx_quick_consumer_index2;
+ if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+ struct status_block_msix *sblk = cp->status_blk;
+
+ tx_cid = TX_TSS_CID + sb_id - 1;
+ cnic_init_context(dev, tx_cid);
+ CNIC_WR(dev, BNX2_TSCH_TSS_CFG, (sb_id << 24) |
+ (TX_TSS_CID << 7));
+ cp->tx_cons_ptr = &sblk->status_tx_quick_consumer_index;
+ }
+ cp->tx_cons = *cp->tx_cons_ptr;
+
+ cid_addr = GET_CID_ADDR(tx_cid);
+ if (CHIP_NUM(cp) == CHIP_NUM_5709) {
+ u32 cid_addr2 = GET_CID_ADDR(tx_cid + 4) + 0x40;
+
+ for (i = 0; i < PHY_CTX_SIZE; i += 4)
+ cnic_ctx_wr(dev, cid_addr2, i, 0);
+
+ offset0 = BNX2_L2CTX_TYPE_XI;
+ offset1 = BNX2_L2CTX_CMD_TYPE_XI;
+ offset2 = BNX2_L2CTX_TBDR_BHADDR_HI_XI;
+ offset3 = BNX2_L2CTX_TBDR_BHADDR_LO_XI;
+ } else {
+ offset0 = BNX2_L2CTX_TYPE;
+ offset1 = BNX2_L2CTX_CMD_TYPE;
+ offset2 = BNX2_L2CTX_TBDR_BHADDR_HI;
+ offset3 = BNX2_L2CTX_TBDR_BHADDR_LO;
+ }
+ val = BNX2_L2CTX_TYPE_TYPE_L2 | BNX2_L2CTX_TYPE_SIZE_L2;
+ cnic_ctx_wr(dev, cid_addr, offset0, val);
+
+ val = BNX2_L2CTX_CMD_TYPE_TYPE_L2 | (8 << 16);
+ cnic_ctx_wr(dev, cid_addr, offset1, val);
+
+ txbd = (struct tx_bd *) cp->l2_ring;
+
+ buf_map = cp->l2_buf_map;
+ for (i = 0; i < MAX_TX_DESC_CNT; i++, txbd++) {
+ txbd->tx_bd_haddr_hi = (u64) buf_map >> 32;
+ txbd->tx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+ }
+ val = (u64) cp->l2_ring_map >> 32;
+ cnic_ctx_wr(dev, cid_addr, offset2, val);
+ txbd->tx_bd_haddr_hi = val;
+
+ val = (u64) cp->l2_ring_map & 0xffffffff;
+ cnic_ctx_wr(dev, cid_addr, offset3, val);
+ txbd->tx_bd_haddr_lo = val;
+}
+
+static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ u32 cid_addr, sb_id, val, coal_reg, coal_val;
+ int i;
+ struct rx_bd *rxbd;
+ struct status_block *s_blk = cp->status_blk;
+
+ sb_id = cp->status_blk_num;
+ cnic_init_context(dev, 2);
+ cp->rx_cons_ptr = &s_blk->status_rx_quick_consumer_index2;
+ coal_reg = BNX2_HC_COMMAND;
+ coal_val = CNIC_RD(dev, coal_reg);
+ if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+ struct status_block_msix *sblk = cp->status_blk;
+
+ cp->rx_cons_ptr = &sblk->status_rx_quick_consumer_index;
+ coal_reg = BNX2_HC_COALESCE_NOW;
+ coal_val = 1 << (11 + sb_id);
+ }
+ i = 0;
+ while (!(*cp->rx_cons_ptr != 0) && i < 10) {
+ CNIC_WR(dev, coal_reg, coal_val);
+ udelay(10);
+ i++;
+ barrier();
+ }
+ cp->rx_cons = *cp->rx_cons_ptr;
+
+ cid_addr = GET_CID_ADDR(2);
+ val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE |
+ BNX2_L2CTX_CTX_TYPE_SIZE_L2 | (0x02 << 8);
+ cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val);
+
+ if (sb_id == 0)
+ val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT;
+ else
+ val = BNX2_L2CTX_STATUSB_NUM(sb_id);
+ cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val);
+
+ rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE);
+ for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) {
+ dma_addr_t buf_map;
+ int n = (i % cp->l2_rx_ring_size) + 1;
+
+ buf_map = cp->l2_buf_map + (n * cp->l2_single_buf_size);
+ rxbd->rx_bd_len = cp->l2_single_buf_size;
+ rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END;
+ rxbd->rx_bd_haddr_hi = (u64) buf_map >> 32;
+ rxbd->rx_bd_haddr_lo = (u64) buf_map & 0xffffffff;
+ }
+ val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) >> 32;
+ cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_HI, val);
+ rxbd->rx_bd_haddr_hi = val;
+
+ val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) & 0xffffffff;
+ cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_NX_BDHADDR_LO, val);
+ rxbd->rx_bd_haddr_lo = val;
+
+ val = cnic_reg_rd_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD);
+ cnic_reg_wr_ind(dev, BNX2_RXP_SCRATCH_RXP_FLOOD, val | (1 << 2));
+}
+
+static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *dev)
+{
+ struct kwqe *wqes[1], l2kwqe;
+
+ memset(&l2kwqe, 0, sizeof(l2kwqe));
+ wqes[0] = &l2kwqe;
+ l2kwqe.kwqe_op_flag = (L2_LAYER_CODE << KWQE_FLAGS_LAYER_SHIFT) |
+ (L2_KWQE_OPCODE_VALUE_FLUSH <<
+ KWQE_OPCODE_SHIFT) | 2;
+ dev->submit_kwqes(dev, wqes, 1);
+}
+
+static void cnic_set_bnx2_mac(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ u32 val;
+
+ val = cp->func << 2;
+
+ cp->shmem_base = cnic_reg_rd_ind(dev, BNX2_SHM_HDR_ADDR_0 + val);
+
+ val = cnic_reg_rd_ind(dev, cp->shmem_base +
+ BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER);
+ dev->mac_addr[0] = (u8) (val >> 8);
+ dev->mac_addr[1] = (u8) val;
+
+ CNIC_WR(dev, BNX2_EMAC_MAC_MATCH4, val);
+
+ val = cnic_reg_rd_ind(dev, cp->shmem_base +
+ BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER);
+ dev->mac_addr[2] = (u8) (val >> 24);
+ dev->mac_addr[3] = (u8) (val >> 16);
+ dev->mac_addr[4] = (u8) (val >> 8);
+ dev->mac_addr[5] = (u8) val;
+
+ CNIC_WR(dev, BNX2_EMAC_MAC_MATCH5, val);
+
+ val = 4 | BNX2_RPM_SORT_USER2_BC_EN;
+ if (CHIP_NUM(cp) != CHIP_NUM_5709)
+ val |= BNX2_RPM_SORT_USER2_PROM_VLAN;
+
+ CNIC_WR(dev, BNX2_RPM_SORT_USER2, 0x0);
+ CNIC_WR(dev, BNX2_RPM_SORT_USER2, val);
+ CNIC_WR(dev, BNX2_RPM_SORT_USER2, val | BNX2_RPM_SORT_USER2_ENA);
+}
+
+static int cnic_start_bnx2_hw(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ struct status_block *sblk = cp->status_blk;
+ u32 val;
+ int err;
+
+ cnic_set_bnx2_mac(dev);
+
+ val = CNIC_RD(dev, BNX2_MQ_CONFIG);
+ val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE;
+ if (BCM_PAGE_BITS > 12)
+ val |= (12 - 8) << 4;
+ else
+ val |= (BCM_PAGE_BITS - 8) << 4;
+
+ CNIC_WR(dev, BNX2_MQ_CONFIG, val);
+
+ CNIC_WR(dev, BNX2_HC_COMP_PROD_TRIP, (2 << 16) | 8);
+ CNIC_WR(dev, BNX2_HC_COM_TICKS, (64 << 16) | 220);
+ CNIC_WR(dev, BNX2_HC_CMD_TICKS, (64 << 16) | 220);
+
+ err = cnic_setup_5709_context(dev, 1);
+ if (err)
+ return err;
+
+ cnic_init_context(dev, KWQ_CID);
+ cnic_init_context(dev, KCQ_CID);
+
+ cp->kwq_cid_addr = GET_CID_ADDR(KWQ_CID);
+ cp->kwq_io_addr = MB_GET_CID_ADDR(KWQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+ cp->max_kwq_idx = MAX_KWQ_IDX;
+ cp->kwq_prod_idx = 0;
+ cp->kwq_con_idx = 0;
+ cp->cnic_local_flags |= CNIC_LCL_FL_KWQ_INIT;
+
+ if (CHIP_NUM(cp) == CHIP_NUM_5706 || CHIP_NUM(cp) == CHIP_NUM_5708)
+ cp->kwq_con_idx_ptr = &sblk->status_rx_quick_consumer_index15;
+ else
+ cp->kwq_con_idx_ptr = &sblk->status_cmd_consumer_index;
+
+ /* Initialize the kernel work queue context. */
+ val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+ (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+ cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_TYPE, val);
+
+ val = (BCM_PAGE_SIZE / sizeof(struct kwqe) - 1) << 16;
+ cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+ val = ((BCM_PAGE_SIZE / sizeof(struct kwqe)) << 16) | KWQ_PAGE_CNT;
+ cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+ val = (u32) ((u64) cp->kwq_info.pgtbl_map >> 32);
+ cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+ val = (u32) cp->kwq_info.pgtbl_map;
+ cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+ cp->kcq_cid_addr = GET_CID_ADDR(KCQ_CID);
+ cp->kcq_io_addr = MB_GET_CID_ADDR(KCQ_CID) + L5_KRNLQ_HOST_QIDX;
+
+ cp->kcq_prod_idx = 0;
+
+ /* Initialize the kernel complete queue context. */
+ val = KRNLQ_TYPE_TYPE_KRNLQ | KRNLQ_SIZE_TYPE_SIZE |
+ (BCM_PAGE_BITS - 8) | KRNLQ_FLAGS_QE_SELF_SEQ;
+ cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_TYPE, val);
+
+ val = (BCM_PAGE_SIZE / sizeof(struct kcqe) - 1) << 16;
+ cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_QE_SELF_SEQ_MAX, val);
+
+ val = ((BCM_PAGE_SIZE / sizeof(struct kcqe)) << 16) | KCQ_PAGE_CNT;
+ cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_NPAGES, val);
+
+ val = (u32) ((u64) cp->kcq_info.pgtbl_map >> 32);
+ cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_HI, val);
+
+ val = (u32) cp->kcq_info.pgtbl_map;
+ cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_PGTBL_HADDR_LO, val);
+
+ cp->int_num = 0;
+ if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+ u32 sb_id = cp->status_blk_num;
+ u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id);
+
+ cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT;
+ cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+ cnic_ctx_wr(dev, cp->kcq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
+ }
+
+ /* Enable Commnad Scheduler notification when we write to the
+ * host producer index of the kernel contexts. */
+ CNIC_WR(dev, BNX2_MQ_KNL_CMD_MASK1, 2);
+
+ /* Enable Command Scheduler notification when we write to either
+ * the Send Queue or Receive Queue producer indexes of the kernel
+ * bypass contexts. */
+ CNIC_WR(dev, BNX2_MQ_KNL_BYP_CMD_MASK1, 7);
+ CNIC_WR(dev, BNX2_MQ_KNL_BYP_WRITE_MASK1, 7);
+
+ /* Notify COM when the driver post an application buffer. */
+ CNIC_WR(dev, BNX2_MQ_KNL_RX_V2P_MASK2, 0x2000);
+
+ /* Set the CP and COM doorbells. These two processors polls the
+ * doorbell for a non zero value before running. This must be done
+ * after setting up the kernel queue contexts. */
+ cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 1);
+ cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 1);
+
+ cnic_init_bnx2_tx_ring(dev);
+ cnic_init_bnx2_rx_ring(dev);
+
+ err = cnic_init_bnx2_irq(dev);
+ if (err) {
+ printk(KERN_ERR PFX "%s: cnic_init_irq failed\n",
+ dev->netdev->name);
+ cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+ cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+ return err;
+ }
+
+ return 0;
+}
+
+static int cnic_start_hw(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+ int err;
+
+ if (test_bit(CNIC_F_CNIC_UP, &dev->flags))
+ return -EALREADY;
+
+ err = ethdev->drv_register_cnic(dev->netdev, cp->cnic_ops, dev);
+ if (err) {
+ printk(KERN_ERR PFX "%s: register_cnic failed\n",
+ dev->netdev->name);
+ goto err2;
+ }
+
+ dev->regview = ethdev->io_base;
+ cp->chip_id = ethdev->chip_id;
+ pci_dev_get(dev->pcidev);
+ cp->func = PCI_FUNC(dev->pcidev->devfn);
+ cp->status_blk = ethdev->irq_arr[0].status_blk;
+ cp->status_blk_num = ethdev->irq_arr[0].status_blk_num;
+
+ err = cp->alloc_resc(dev);
+ if (err) {
+ printk(KERN_ERR PFX "%s: allocate resource failure\n",
+ dev->netdev->name);
+ goto err1;
+ }
+
+ err = cp->start_hw(dev);
+ if (err)
+ goto err1;
+
+ err = cnic_cm_open(dev);
+ if (err)
+ goto err1;
+
+ set_bit(CNIC_F_CNIC_UP, &dev->flags);
+
+ cp->enable_int(dev);
+
+ return 0;
+
+err1:
+ ethdev->drv_unregister_cnic(dev->netdev);
+ cp->free_resc(dev);
+ pci_dev_put(dev->pcidev);
+err2:
+ return err;
+}
+
+static void cnic_stop_bnx2_hw(struct cnic_dev *dev)
+{
+ struct cnic_local *cp = dev->cnic_priv;
+ struct cnic_eth_dev *ethdev = cp->ethdev;
+
+ cnic_disable_bnx2_int_sync(dev);
+
+ cnic_reg_wr_ind(dev, BNX2_CP_SCRATCH + 0x20, 0);
+ cnic_reg_wr_ind(dev, BNX2_COM_SCRATCH + 0x20, 0);
+
+ cnic_init_context(dev, KWQ_CID);
+ cnic_init_context(dev, KCQ_CID);
+
+ cnic_setup_5709_context(dev, 0);
+ cnic_free_irq(dev);
+
+ ethdev->drv_unregister_cnic(dev->netdev);
+
+ cnic_free_resc(dev);
+}
+
+static void cnic_stop_hw(struct cnic_dev *dev)
+{
+ if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+ struct cnic_local *cp = dev->cnic_priv;
+
+ clear_bit(CNIC_F_CNIC_UP, &dev->flags);
+ rcu_assign_pointer(cp->ulp_ops[CNIC_ULP_L4], NULL);
+ synchronize_rcu();
+ cnic_cm_shutdown(dev);
+ cp->stop_hw(dev);
+ pci_dev_put(dev->pcidev);
+ }
+}
+
+static void cnic_free_dev(struct cnic_dev *dev)
+{
+ int i = 0;
+
+ while ((atomic_read(&dev->ref_count) != 0) && i < 10) {
+ msleep(100);
+ i++;
+ }
+ if (atomic_read(&dev->ref_count) != 0)
+ printk(KERN_ERR PFX "%s: Failed waiting for ref count to go"
+ " to zero.\n", dev->netdev->name);
+
+ printk(KERN_INFO PFX "Removed CNIC device: %s\n", dev->netdev->name);
+ dev_put(dev->netdev);
+ kfree(dev);
+}
+
+static struct cnic_dev *cnic_alloc_dev(struct net_device *dev,
+ struct pci_dev *pdev)
+{
+ struct cnic_dev *cdev;
+ struct cnic_local *cp;
+ int alloc_size;
+
+ alloc_size = sizeof(struct cnic_dev) + sizeof(struct cnic_local);
+
+ cdev = kzalloc(alloc_size , GFP_KERNEL);
+ if (cdev == NULL) {
+ printk(KERN_ERR PFX "%s: allocate dev struct failure\n",
+ dev->name);
+ return NULL;
+ }
+
+ cdev->netdev = dev;
+ cdev->cnic_priv = (char *)cdev + sizeof(struct cnic_dev);
+ cdev->register_device = cnic_register_device;
+ cdev->unregister_device = cnic_unregister_device;
+ cdev->iscsi_nl_msg_recv = cnic_iscsi_nl_msg_recv;
+
+ cp = cdev->cnic_priv;
+ cp->dev = cdev;
+ cp->uio_dev = -1;
+ cp->l2_single_buf_size = 0x400;
+ cp->l2_rx_ring_size = 3;
+
+ spin_lock_init(&cp->cnic_ulp_lock);
+
+ printk(KERN_INFO PFX "Added CNIC device: %s\n", dev->name);
+
+ return cdev;
+}
+
+static struct cnic_dev *init_bnx2_cnic(struct net_device *dev)
+{
+ struct pci_dev *pdev;
+ struct cnic_dev *cdev;
+ struct cnic_local *cp;
+ struct cnic_eth_dev *ethdev = NULL;
+ struct cnic_eth_dev *(*probe)(void *) = NULL;
+
+ probe = __symbol_get("bnx2_cnic_probe");
+ if (probe) {
+ ethdev = (*probe)(dev);
+ symbol_put_addr(probe);
+ }
+ if (!ethdev)
+ return NULL;
+
+ pdev = ethdev->pdev;
+ if (!pdev)
+ return NULL;
+
+ dev_hold(dev);
+ pci_dev_get(pdev);
+ if (pdev->device == PCI_DEVICE_ID_NX2_5709 ||
+ pdev->device == PCI_DEVICE_ID_NX2_5709S) {
+ u8 rev;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+ if (rev < 0x10) {
+ pci_dev_put(pdev);
+ goto cnic_err;
+ }
+ }
+ pci_dev_put(pdev);
+
+ cdev = cnic_alloc_dev(dev, pdev);
+ if (cdev == NULL)
+ goto cnic_err;
+
+ set_bit(CNIC_F_BNX2_CLASS, &cdev->flags);
+ cdev->submit_kwqes = cnic_submit_bnx2_kwqes;
+
+ cp = cdev->cnic_priv;
+ cp->ethdev = ethdev;
+ cdev->pcidev = pdev;
+
+ cp->cnic_ops = &cnic_bnx2_ops;
+ cp->start_hw = cnic_start_bnx2_hw;
+ cp->stop_hw = cnic_stop_bnx2_hw;
+ cp->setup_pgtbl = cnic_setup_page_tbl;
+ cp->alloc_resc = cnic_alloc_bnx2_resc;
+ cp->free_resc = cnic_free_resc;
+ cp->start_cm = cnic_cm_init_bnx2_hw;
+ cp->stop_cm = cnic_cm_stop_bnx2_hw;
+ cp->enable_int = cnic_enable_bnx2_int;
+ cp->disable_int_sync = cnic_disable_bnx2_int_sync;
+ cp->close_conn = cnic_close_bnx2_conn;
+ cp->next_idx = cnic_bnx2_next_idx;
+ cp->hw_idx = cnic_bnx2_hw_idx;
+ return cdev;
+
+cnic_err:
+ dev_put(dev);
+ return NULL;
+}
+
+static struct cnic_dev *is_cnic_dev(struct net_device *dev)
+{
+ struct ethtool_drvinfo drvinfo;
+ struct cnic_dev *cdev = NULL;
+
+ if (dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) {
+ memset(&drvinfo, 0, sizeof(drvinfo));
+ dev->ethtool_ops->get_drvinfo(dev, &drvinfo);
+
+ if (!strcmp(drvinfo.driver, "bnx2"))
+ cdev = init_bnx2_cnic(dev);
+ if (cdev) {
+ write_lock(&cnic_dev_lock);
+ list_add(&cdev->list, &cnic_dev_list);
+ write_unlock(&cnic_dev_lock);
+ }
+ }
+ return cdev;
+}
+
+/**
+ * netdev event handler
+ */
+static int cnic_netdev_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ struct net_device *netdev = ptr;
+ struct cnic_dev *dev;
+ int if_type;
+ int new_dev = 0;
+
+ dev = cnic_from_netdev(netdev);
+
+ if (!dev && (event == NETDEV_REGISTER || event == NETDEV_UP)) {
+ /* Check for the hot-plug device */
+ dev = is_cnic_dev(netdev);
+ if (dev) {
+ new_dev = 1;
+ cnic_hold(dev);
+ }
+ }
+ if (dev) {
+ struct cnic_local *cp = dev->cnic_priv;
+
+ if (new_dev)
+ cnic_ulp_init(dev);
+ else if (event == NETDEV_UNREGISTER)
+ cnic_ulp_exit(dev);
+ else if (event == NETDEV_UP) {
+ mutex_lock(&cnic_lock);
+ if (!cnic_start_hw(dev))
+ cnic_ulp_start(dev);
+ mutex_unlock(&cnic_lock);
+ }
+
+ rcu_read_lock();
+ for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
+ struct cnic_ulp_ops *ulp_ops;
+ void *ctx;
+
+ ulp_ops = rcu_dereference(cp->ulp_ops[if_type]);
+ if (!ulp_ops || !ulp_ops->indicate_netevent)
+ continue;
+
+ ctx = cp->ulp_handle[if_type];
+
+ ulp_ops->indicate_netevent(ctx, event);
+ }
+ rcu_read_unlock();
+
+ if (event == NETDEV_GOING_DOWN) {
+ mutex_lock(&cnic_lock);
+ cnic_ulp_stop(dev);
+ cnic_stop_hw(dev);
+ mutex_unlock(&cnic_lock);
+ } else if (event == NETDEV_UNREGISTER) {
+ write_lock(&cnic_dev_lock);
+ list_del_init(&dev->list);
+ write_unlock(&cnic_dev_lock);
+
+ cnic_put(dev);
+ cnic_free_dev(dev);
+ goto done;
+ }
+ cnic_put(dev);
+ }
+done:
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block cnic_netdev_notifier = {
+ .notifier_call = cnic_netdev_event
+};
+
+static void cnic_release(void)
+{
+ struct cnic_dev *dev;
+
+ while (!list_empty(&cnic_dev_list)) {
+ dev = list_entry(cnic_dev_list.next, struct cnic_dev, list);
+ if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+ cnic_ulp_stop(dev);
+ cnic_stop_hw(dev);
+ }
+
+ cnic_ulp_exit(dev);
+ list_del_init(&dev->list);
+ cnic_free_dev(dev);
+ }
+}
+
+static int __init cnic_init(void)
+{
+ int rc = 0;
+
+ printk(KERN_INFO "%s", version);
+
+ rc = register_netdevice_notifier(&cnic_netdev_notifier);
+ if (rc) {
+ cnic_release();
+ return rc;
+ }
+
+ return 0;
+}
+
+static void __exit cnic_exit(void)
+{
+ unregister_netdevice_notifier(&cnic_netdev_notifier);
+ cnic_release();
+ return;
+}
+
+module_init(cnic_init);
+module_exit(cnic_exit);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
new file mode 100644
index 0000000..5192d4a
--- /dev/null
+++ b/drivers/net/cnic.h
@@ -0,0 +1,299 @@
+/* cnic.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_H
+#define CNIC_H
+
+#define KWQ_PAGE_CNT 4
+#define KCQ_PAGE_CNT 16
+
+#define KWQ_CID 24
+#define KCQ_CID 25
+
+/*
+ * krnlq_context definition
+ */
+#define L5_KRNLQ_FLAGS 0x00000000
+#define L5_KRNLQ_SIZE 0x00000000
+#define L5_KRNLQ_TYPE 0x00000000
+#define KRNLQ_FLAGS_PG_SZ (0xf<<0)
+#define KRNLQ_FLAGS_PG_SZ_256 (0<<0)
+#define KRNLQ_FLAGS_PG_SZ_512 (1<<0)
+#define KRNLQ_FLAGS_PG_SZ_1K (2<<0)
+#define KRNLQ_FLAGS_PG_SZ_2K (3<<0)
+#define KRNLQ_FLAGS_PG_SZ_4K (4<<0)
+#define KRNLQ_FLAGS_PG_SZ_8K (5<<0)
+#define KRNLQ_FLAGS_PG_SZ_16K (6<<0)
+#define KRNLQ_FLAGS_PG_SZ_32K (7<<0)
+#define KRNLQ_FLAGS_PG_SZ_64K (8<<0)
+#define KRNLQ_FLAGS_PG_SZ_128K (9<<0)
+#define KRNLQ_FLAGS_PG_SZ_256K (10<<0)
+#define KRNLQ_FLAGS_PG_SZ_512K (11<<0)
+#define KRNLQ_FLAGS_PG_SZ_1M (12<<0)
+#define KRNLQ_FLAGS_PG_SZ_2M (13<<0)
+#define KRNLQ_FLAGS_QE_SELF_SEQ (1<<15)
+#define KRNLQ_SIZE_TYPE_SIZE ((((0x28 + 0x1f) & ~0x1f) / 0x20) << 16)
+#define KRNLQ_TYPE_TYPE (0xf<<28)
+#define KRNLQ_TYPE_TYPE_EMPTY (0<<28)
+#define KRNLQ_TYPE_TYPE_KRNLQ (6<<28)
+
+#define L5_KRNLQ_HOST_QIDX 0x00000004
+#define L5_KRNLQ_HOST_FW_QIDX 0x00000008
+#define L5_KRNLQ_NX_QE_SELF_SEQ 0x0000000c
+#define L5_KRNLQ_QE_SELF_SEQ_MAX 0x0000000c
+#define L5_KRNLQ_NX_QE_HADDR_HI 0x00000010
+#define L5_KRNLQ_NX_QE_HADDR_LO 0x00000014
+#define L5_KRNLQ_PGTBL_PGIDX 0x00000018
+#define L5_KRNLQ_NX_PG_QIDX 0x00000018
+#define L5_KRNLQ_PGTBL_NPAGES 0x0000001c
+#define L5_KRNLQ_QIDX_INCR 0x0000001c
+#define L5_KRNLQ_PGTBL_HADDR_HI 0x00000020
+#define L5_KRNLQ_PGTBL_HADDR_LO 0x00000024
+
+#define BNX2_PG_CTX_MAP 0x1a0034
+#define BNX2_ISCSI_CTX_MAP 0x1a0074
+
+struct cnic_redirect_entry {
+ struct dst_entry *old_dst;
+ struct dst_entry *new_dst;
+};
+
+#define MAX_COMPLETED_KCQE 64
+
+#define MAX_CNIC_L5_CONTEXT 256
+
+#define MAX_CM_SK_TBL_SZ MAX_CNIC_L5_CONTEXT
+
+#define MAX_ISCSI_TBL_SZ 256
+
+#define CNIC_LOCAL_PORT_MIN 60000
+#define CNIC_LOCAL_PORT_MAX 61000
+#define CNIC_LOCAL_PORT_RANGE (CNIC_LOCAL_PORT_MAX - CNIC_LOCAL_PORT_MIN)
+
+#define KWQE_CNT (BCM_PAGE_SIZE / sizeof(struct kwqe))
+#define KCQE_CNT (BCM_PAGE_SIZE / sizeof(struct kcqe))
+#define MAX_KWQE_CNT (KWQE_CNT - 1)
+#define MAX_KCQE_CNT (KCQE_CNT - 1)
+
+#define MAX_KWQ_IDX ((KWQ_PAGE_CNT * KWQE_CNT) - 1)
+#define MAX_KCQ_IDX ((KCQ_PAGE_CNT * KCQE_CNT) - 1)
+
+#define KWQ_PG(x) (((x) & ~MAX_KWQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KWQ_IDX(x) ((x) & MAX_KWQE_CNT)
+
+#define KCQ_PG(x) (((x) & ~MAX_KCQE_CNT) >> (BCM_PAGE_BITS - 5))
+#define KCQ_IDX(x) ((x) & MAX_KCQE_CNT)
+
+#define BNX2X_NEXT_KCQE(x) (((x) & (MAX_KCQE_CNT - 1)) == \
+ (MAX_KCQE_CNT - 1)) ? \
+ (x) + 2 : (x) + 1
+
+#define BNX2X_KWQ_DATA_PG(cp, x) ((x) / (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA_IDX(cp, x) ((x) % (cp)->kwq_16_data_pp)
+#define BNX2X_KWQ_DATA(cp, x) \
+ &(cp)->kwq_16_data[BNX2X_KWQ_DATA_PG(cp, x)][BNX2X_KWQ_DATA_IDX(cp, x)]
+
+#define DEF_IPID_COUNT 0xc001
+
+#define DEF_KA_TIMEOUT 10000
+#define DEF_KA_INTERVAL 300000
+#define DEF_KA_MAX_PROBE_COUNT 3
+#define DEF_TOS 0
+#define DEF_TTL 0xfe
+#define DEF_SND_SEQ_SCALE 0
+#define DEF_RCV_BUF 0xffff
+#define DEF_SND_BUF 0xffff
+#define DEF_SEED 0
+#define DEF_MAX_RT_TIME 500
+#define DEF_MAX_DA_COUNT 2
+#define DEF_SWS_TIMER 1000
+#define DEF_MAX_CWND 0xffff
+
+struct cnic_ctx {
+ u32 cid;
+ void *ctx;
+ dma_addr_t mapping;
+};
+
+#define BNX2_MAX_CID 0x2000
+
+struct cnic_dma {
+ int num_pages;
+ void **pg_arr;
+ dma_addr_t *pg_map_arr;
+ int pgtbl_size;
+ u32 *pgtbl;
+ dma_addr_t pgtbl_map;
+};
+
+struct cnic_id_tbl {
+ spinlock_t lock;
+ u32 start;
+ u32 max;
+ u32 next;
+ unsigned long *table;
+};
+
+#define CNIC_KWQ16_DATA_SIZE 128
+
+struct kwqe_16_data {
+ u8 data[CNIC_KWQ16_DATA_SIZE];
+};
+
+struct cnic_iscsi {
+ struct cnic_dma task_array_info;
+ struct cnic_dma r2tq_info;
+ struct cnic_dma hq_info;
+};
+
+struct cnic_context {
+ u32 cid;
+ struct kwqe_16_data *kwqe_data;
+ dma_addr_t kwqe_data_mapping;
+ wait_queue_head_t waitq;
+ int wait_cond;
+ unsigned long timestamp;
+ u32 ctx_flags;
+#define CTX_FL_OFFLD_START 0x00000001
+ u8 ulp_proto_id;
+ union {
+ struct cnic_iscsi *iscsi;
+ } proto;
+};
+
+struct cnic_local {
+
+ spinlock_t cnic_ulp_lock;
+ void *ulp_handle[MAX_CNIC_ULP_TYPE];
+ unsigned long ulp_flags[MAX_CNIC_ULP_TYPE];
+#define ULP_F_INIT 0
+#define ULP_F_START 1
+ struct cnic_ulp_ops *ulp_ops[MAX_CNIC_ULP_TYPE];
+
+ /* protected by ulp_lock */
+ u32 cnic_local_flags;
+#define CNIC_LCL_FL_KWQ_INIT 0x00000001
+
+ struct cnic_dev *dev;
+
+ struct cnic_eth_dev *ethdev;
+
+ void *l2_ring;
+ dma_addr_t l2_ring_map;
+ int l2_ring_size;
+ int l2_rx_ring_size;
+
+ void *l2_buf;
+ dma_addr_t l2_buf_map;
+ int l2_buf_size;
+ int l2_single_buf_size;
+
+ u16 *rx_cons_ptr;
+ u16 *tx_cons_ptr;
+ u16 rx_cons;
+ u16 tx_cons;
+
+ u32 kwq_cid_addr;
+ u32 kcq_cid_addr;
+
+ struct cnic_dma kwq_info;
+ struct kwqe **kwq;
+
+ struct cnic_dma kwq_16_data_info;
+
+ u16 max_kwq_idx;
+
+ u16 kwq_prod_idx;
+ u32 kwq_io_addr;
+
+ u16 *kwq_con_idx_ptr;
+ u16 kwq_con_idx;
+
+ struct cnic_dma kcq_info;
+ struct kcqe **kcq;
+
+ u16 kcq_prod_idx;
+ u32 kcq_io_addr;
+
+ void *status_blk;
+ struct status_block_msix *bnx2_status_blk;
+ struct host_status_block *bnx2x_status_blk;
+
+ u32 status_blk_num;
+ u32 int_num;
+ u32 last_status_idx;
+ struct tasklet_struct cnic_irq_task;
+
+ struct kcqe *completed_kcq[MAX_COMPLETED_KCQE];
+
+ struct cnic_sock *csk_tbl;
+ struct cnic_id_tbl csk_port_tbl;
+
+ struct cnic_dma conn_buf_info;
+ struct cnic_dma gbl_buf_info;
+
+ struct cnic_iscsi *iscsi_tbl;
+ struct cnic_context *ctx_tbl;
+ struct cnic_id_tbl cid_tbl;
+ int max_iscsi_conn;
+ atomic_t iscsi_conn;
+
+ /* per connection parameters */
+ int num_iscsi_tasks;
+ int num_ccells;
+ int task_array_size;
+ int r2tq_size;
+ int hq_size;
+ int num_cqs;
+
+ struct cnic_ctx *ctx_arr;
+ int ctx_blks;
+ int ctx_blk_size;
+ int cids_per_blk;
+
+ u32 chip_id;
+ int func;
+ u32 shmem_base;
+
+ u32 uio_dev;
+ struct uio_info *cnic_uinfo;
+
+ struct cnic_ops *cnic_ops;
+ int (*start_hw)(struct cnic_dev *);
+ void (*stop_hw)(struct cnic_dev *);
+ void (*setup_pgtbl)(struct cnic_dev *,
+ struct cnic_dma *);
+ int (*alloc_resc)(struct cnic_dev *);
+ void (*free_resc)(struct cnic_dev *);
+ int (*start_cm)(struct cnic_dev *);
+ void (*stop_cm)(struct cnic_dev *);
+ void (*enable_int)(struct cnic_dev *);
+ void (*disable_int_sync)(struct cnic_dev *);
+ void (*ack_int)(struct cnic_dev *);
+ void (*close_conn)(struct cnic_sock *, u32 opcode);
+ u16 (*next_idx)(u16);
+ u16 (*hw_idx)(u16);
+};
+
+struct bnx2x_bd_chain_next {
+ u32 addr_lo;
+ u32 addr_hi;
+ u8 reserved[8];
+};
+
+#define ISCSI_RAMROD_CMD_ID_UPDATE_CONN (ISCSI_KCQE_OPCODE_UPDATE_CONN)
+#define ISCSI_RAMROD_CMD_ID_INIT (ISCSI_KCQE_OPCODE_INIT)
+
+#define CDU_REGION_NUMBER_XCM_AG 2
+#define CDU_REGION_NUMBER_UCM_AG 4
+
+#endif
+
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
new file mode 100644
index 0000000..cee80f6
--- /dev/null
+++ b/drivers/net/cnic_defs.h
@@ -0,0 +1,580 @@
+
+/* cnic.c: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006-2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+#ifndef CNIC_DEFS_H
+#define CNIC_DEFS_H
+
+/* KWQ (kernel work queue) request op codes */
+#define L2_KWQE_OPCODE_VALUE_FLUSH (4)
+
+#define L4_KWQE_OPCODE_VALUE_CONNECT1 (50)
+#define L4_KWQE_OPCODE_VALUE_CONNECT2 (51)
+#define L4_KWQE_OPCODE_VALUE_CONNECT3 (52)
+#define L4_KWQE_OPCODE_VALUE_RESET (53)
+#define L4_KWQE_OPCODE_VALUE_CLOSE (54)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_SECRET (60)
+#define L4_KWQE_OPCODE_VALUE_INIT_ULP (61)
+
+#define L4_KWQE_OPCODE_VALUE_OFFLOAD_PG (1)
+#define L4_KWQE_OPCODE_VALUE_UPDATE_PG (9)
+#define L4_KWQE_OPCODE_VALUE_UPLOAD_PG (14)
+
+#define L5CM_RAMROD_CMD_ID_BASE (0x80)
+#define L5CM_RAMROD_CMD_ID_TCP_CONNECT (L5CM_RAMROD_CMD_ID_BASE + 3)
+#define L5CM_RAMROD_CMD_ID_CLOSE (L5CM_RAMROD_CMD_ID_BASE + 12)
+#define L5CM_RAMROD_CMD_ID_ABORT (L5CM_RAMROD_CMD_ID_BASE + 13)
+#define L5CM_RAMROD_CMD_ID_SEARCHER_DELETE (L5CM_RAMROD_CMD_ID_BASE + 14)
+#define L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD (L5CM_RAMROD_CMD_ID_BASE + 15)
+
+/* KCQ (kernel completion queue) response op codes */
+#define L4_KCQE_OPCODE_VALUE_CLOSE_COMP (53)
+#define L4_KCQE_OPCODE_VALUE_RESET_COMP (54)
+#define L4_KCQE_OPCODE_VALUE_FW_TCP_UPDATE (55)
+#define L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE (56)
+#define L4_KCQE_OPCODE_VALUE_RESET_RECEIVED (57)
+#define L4_KCQE_OPCODE_VALUE_CLOSE_RECEIVED (58)
+#define L4_KCQE_OPCODE_VALUE_INIT_ULP (61)
+
+#define L4_KCQE_OPCODE_VALUE_OFFLOAD_PG (1)
+#define L4_KCQE_OPCODE_VALUE_UPDATE_PG (9)
+#define L4_KCQE_OPCODE_VALUE_UPLOAD_PG (14)
+
+/* KCQ (kernel completion queue) completion status */
+#define L4_KCQE_COMPLETION_STATUS_SUCCESS (0)
+#define L4_KCQE_COMPLETION_STATUS_TIMEOUT (0x93)
+
+#define L4_LAYER_CODE (4)
+#define L2_LAYER_CODE (2)
+
+/*
+ * L4 KCQ CQE
+ */
+struct l4_kcq {
+ u32 cid;
+ u32 pg_cid;
+ u32 conn_id;
+ u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+ u16 status;
+ u16 reserved1;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved1;
+ u16 status;
+#endif
+ u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KCQ_RESERVED3 (0x7<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+ u8 op_code;
+ u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+ u16 qe_self_seq;
+ u8 op_code;
+ u8 flags;
+#define L4_KCQ_RESERVED3 (0xF<<0)
+#define L4_KCQ_RESERVED3_SHIFT 0
+#define L4_KCQ_RAMROD_COMPLETION (0x1<<3) /* Everest only */
+#define L4_KCQ_RAMROD_COMPLETION_SHIFT 3
+#define L4_KCQ_LAYER_CODE (0x7<<4)
+#define L4_KCQ_LAYER_CODE_SHIFT 4
+#define L4_KCQ_RESERVED4 (0x1<<7)
+#define L4_KCQ_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * L4 KCQ CQE PG upload
+ */
+struct l4_kcq_upload_pg {
+ u32 pg_cid;
+#if defined(__BIG_ENDIAN)
+ u16 pg_status;
+ u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+ u16 pg_ipid_count;
+ u16 pg_status;
+#endif
+ u32 reserved1[5];
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+ u8 op_code;
+ u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+ u16 qe_self_seq;
+ u8 op_code;
+ u8 flags;
+#define L4_KCQ_UPLOAD_PG_RESERVED3 (0xF<<0)
+#define L4_KCQ_UPLOAD_PG_RESERVED3_SHIFT 0
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KCQ_UPLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KCQ_UPLOAD_PG_RESERVED4 (0x1<<7)
+#define L4_KCQ_UPLOAD_PG_RESERVED4_SHIFT 7
+#endif
+};
+
+
+/*
+ * Gracefully close the connection request
+ */
+struct l4_kwq_close_req {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+ u8 op_code;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_code;
+ u8 flags;
+#define L4_KWQ_CLOSE_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_CLOSE_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CLOSE_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CLOSE_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+ u32 cid;
+ u32 reserved2[6];
+};
+
+
+/*
+ * The first request to be passed in order to establish connection in option2
+ */
+struct l4_kwq_connect_req1 {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+ u8 op_code;
+ u8 reserved0;
+ u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+ u8 conn_flags;
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_IS_PG_HOST_OPAQUE_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_IP_V6 (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_IP_V6_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_PASSIVE_FLAG_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_RSRV (0x1F<<3)
+#define L4_KWQ_CONNECT_REQ1_RSRV_SHIFT 3
+ u8 reserved0;
+ u8 op_code;
+ u8 flags;
+#define L4_KWQ_CONNECT_REQ1_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ1_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ1_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ1_LINKED_WITH_NEXT_SHIFT 7
+#endif
+ u32 cid;
+ u32 pg_cid;
+ u32 src_ip;
+ u32 dst_ip;
+#if defined(__BIG_ENDIAN)
+ u16 dst_port;
+ u16 src_port;
+#elif defined(__LITTLE_ENDIAN)
+ u16 src_port;
+ u16 dst_port;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 rsrv1[3];
+ u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+#elif defined(__LITTLE_ENDIAN)
+ u8 tcp_flags;
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK (0x1<<0)
+#define L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK_SHIFT 0
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE (0x1<<1)
+#define L4_KWQ_CONNECT_REQ1_KEEP_ALIVE_SHIFT 1
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE (0x1<<2)
+#define L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE_SHIFT 2
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP (0x1<<3)
+#define L4_KWQ_CONNECT_REQ1_TIME_STAMP_SHIFT 3
+#define L4_KWQ_CONNECT_REQ1_SACK (0x1<<4)
+#define L4_KWQ_CONNECT_REQ1_SACK_SHIFT 4
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING (0x1<<5)
+#define L4_KWQ_CONNECT_REQ1_SEG_SCALING_SHIFT 5
+#define L4_KWQ_CONNECT_REQ1_RESERVED2 (0x3<<6)
+#define L4_KWQ_CONNECT_REQ1_RESERVED2_SHIFT 6
+ u8 rsrv1[3];
+#endif
+ u32 rsrv2;
+};
+
+
+/*
+ * The second ( optional )request to be passed in order to establish
+ * connection in option2 - for IPv6 only
+ */
+struct l4_kwq_connect_req2 {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+ u8 op_code;
+ u8 reserved0;
+ u8 rsrv;
+#elif defined(__LITTLE_ENDIAN)
+ u8 rsrv;
+ u8 reserved0;
+ u8 op_code;
+ u8 flags;
+#define L4_KWQ_CONNECT_REQ2_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ2_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ2_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ2_LINKED_WITH_NEXT_SHIFT 7
+#endif
+ u32 reserved2;
+ u32 src_ip_v6_2;
+ u32 src_ip_v6_3;
+ u32 src_ip_v6_4;
+ u32 dst_ip_v6_2;
+ u32 dst_ip_v6_3;
+ u32 dst_ip_v6_4;
+};
+
+
+/*
+ * The third ( and last )request to be passed in order to establish
+ * connection in option2
+ */
+struct l4_kwq_connect_req3 {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+ u8 op_code;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_code;
+ u8 flags;
+#define L4_KWQ_CONNECT_REQ3_RESERVED1 (0xF<<0)
+#define L4_KWQ_CONNECT_REQ3_RESERVED1_SHIFT 0
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE (0x7<<4)
+#define L4_KWQ_CONNECT_REQ3_LAYER_CODE_SHIFT 4
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_CONNECT_REQ3_LINKED_WITH_NEXT_SHIFT 7
+#endif
+ u32 ka_timeout;
+ u32 ka_interval ;
+#if defined(__BIG_ENDIAN)
+ u8 snd_seq_scale;
+ u8 ttl;
+ u8 tos;
+ u8 ka_max_probe_count;
+#elif defined(__LITTLE_ENDIAN)
+ u8 ka_max_probe_count;
+ u8 tos;
+ u8 ttl;
+ u8 snd_seq_scale;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 pmtu;
+ u16 mss;
+#elif defined(__LITTLE_ENDIAN)
+ u16 mss;
+ u16 pmtu;
+#endif
+ u32 rcv_buf;
+ u32 snd_buf;
+ u32 seed;
+};
+
+
+/*
+ * a KWQE request to offload a PG connection
+ */
+struct l4_kwq_offload_pg {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+ u8 op_code;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_code;
+ u8 flags;
+#define L4_KWQ_OFFLOAD_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_OFFLOAD_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_OFFLOAD_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_OFFLOAD_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 l2hdr_nbytes;
+ u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+ u8 da0;
+ u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+ u8 da1;
+ u8 da0;
+ u8 pg_flags;
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP (0x1<<0)
+#define L4_KWQ_OFFLOAD_PG_SNAP_ENCAP_SHIFT 0
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING (0x1<<1)
+#define L4_KWQ_OFFLOAD_PG_VLAN_TAGGING_SHIFT 1
+#define L4_KWQ_OFFLOAD_PG_RESERVED2 (0x3F<<2)
+#define L4_KWQ_OFFLOAD_PG_RESERVED2_SHIFT 2
+ u8 l2hdr_nbytes;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 da2;
+ u8 da3;
+ u8 da4;
+ u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+ u8 da5;
+ u8 da4;
+ u8 da3;
+ u8 da2;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 sa0;
+ u8 sa1;
+ u8 sa2;
+ u8 sa3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 sa3;
+ u8 sa2;
+ u8 sa1;
+ u8 sa0;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 sa4;
+ u8 sa5;
+ u16 etype;
+#elif defined(__LITTLE_ENDIAN)
+ u16 etype;
+ u8 sa5;
+ u8 sa4;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 vlan_tag;
+ u16 ipid_start;
+#elif defined(__LITTLE_ENDIAN)
+ u16 ipid_start;
+ u16 vlan_tag;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 ipid_count;
+ u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved3;
+ u16 ipid_count;
+#endif
+ u32 host_opaque;
+};
+
+
+/*
+ * Abortively close the connection request
+ */
+struct l4_kwq_reset_req {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+ u8 op_code;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_code;
+ u8 flags;
+#define L4_KWQ_RESET_REQ_RESERVED1 (0xF<<0)
+#define L4_KWQ_RESET_REQ_RESERVED1_SHIFT 0
+#define L4_KWQ_RESET_REQ_LAYER_CODE (0x7<<4)
+#define L4_KWQ_RESET_REQ_LAYER_CODE_SHIFT 4
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_RESET_REQ_LINKED_WITH_NEXT_SHIFT 7
+#endif
+ u32 cid;
+ u32 reserved2[6];
+};
+
+
+/*
+ * a KWQE request to update a PG connection
+ */
+struct l4_kwq_update_pg {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+ u8 opcode;
+ u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+ u16 oper16;
+ u8 opcode;
+ u8 flags;
+#define L4_KWQ_UPDATE_PG_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPDATE_PG_RESERVED1_SHIFT 0
+#define L4_KWQ_UPDATE_PG_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPDATE_PG_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPDATE_PG_LINKED_WITH_NEXT_SHIFT 7
+#endif
+ u32 pg_cid;
+ u32 pg_host_opaque;
+#if defined(__BIG_ENDIAN)
+ u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+ u8 pg_unused_a;
+ u16 pg_ipid_count;
+#elif defined(__LITTLE_ENDIAN)
+ u16 pg_ipid_count;
+ u8 pg_unused_a;
+ u8 pg_valids;
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT (0x1<<0)
+#define L4_KWQ_UPDATE_PG_VALIDS_IPID_COUNT_SHIFT 0
+#define L4_KWQ_UPDATE_PG_VALIDS_DA (0x1<<1)
+#define L4_KWQ_UPDATE_PG_VALIDS_DA_SHIFT 1
+#define L4_KWQ_UPDATE_PG_RESERVERD2 (0x3F<<2)
+#define L4_KWQ_UPDATE_PG_RESERVERD2_SHIFT 2
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 reserverd3;
+ u8 da0;
+ u8 da1;
+#elif defined(__LITTLE_ENDIAN)
+ u8 da1;
+ u8 da0;
+ u16 reserverd3;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 da2;
+ u8 da3;
+ u8 da4;
+ u8 da5;
+#elif defined(__LITTLE_ENDIAN)
+ u8 da5;
+ u8 da4;
+ u8 da3;
+ u8 da2;
+#endif
+ u32 reserved4;
+ u32 reserved5;
+};
+
+
+/*
+ * a KWQE request to upload a PG or L4 context
+ */
+struct l4_kwq_upload {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+ u8 opcode;
+ u16 oper16;
+#elif defined(__LITTLE_ENDIAN)
+ u16 oper16;
+ u8 opcode;
+ u8 flags;
+#define L4_KWQ_UPLOAD_RESERVED1 (0xF<<0)
+#define L4_KWQ_UPLOAD_RESERVED1_SHIFT 0
+#define L4_KWQ_UPLOAD_LAYER_CODE (0x7<<4)
+#define L4_KWQ_UPLOAD_LAYER_CODE_SHIFT 4
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT (0x1<<7)
+#define L4_KWQ_UPLOAD_LINKED_WITH_NEXT_SHIFT 7
+#endif
+ u32 cid;
+ u32 reserved2[6];
+};
+
+#endif /* CNIC_DEFS_H */
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
new file mode 100644
index 0000000..0638096
--- /dev/null
+++ b/drivers/net/cnic_if.h
@@ -0,0 +1,299 @@
+/* cnic_if.h: Broadcom CNIC core network driver.
+ *
+ * Copyright (c) 2006 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ */
+
+
+#ifndef CNIC_IF_H
+#define CNIC_IF_H
+
+#define CNIC_MODULE_VERSION "2.0.0"
+#define CNIC_MODULE_RELDATE "May 21, 2009"
+
+#define CNIC_ULP_RDMA 0
+#define CNIC_ULP_ISCSI 1
+#define CNIC_ULP_L4 2
+#define MAX_CNIC_ULP_TYPE_EXT 2
+#define MAX_CNIC_ULP_TYPE 3
+
+struct kwqe {
+ u32 kwqe_op_flag;
+
+#define KWQE_OPCODE_MASK 0x00ff0000
+#define KWQE_OPCODE_SHIFT 16
+#define KWQE_FLAGS_LAYER_SHIFT 28
+#define KWQE_OPCODE(x) ((x & KWQE_OPCODE_MASK) >> KWQE_OPCODE_SHIFT)
+
+ u32 kwqe_info0;
+ u32 kwqe_info1;
+ u32 kwqe_info2;
+ u32 kwqe_info3;
+ u32 kwqe_info4;
+ u32 kwqe_info5;
+ u32 kwqe_info6;
+};
+
+struct kwqe_16 {
+ u32 kwqe_info0;
+ u32 kwqe_info1;
+ u32 kwqe_info2;
+ u32 kwqe_info3;
+};
+
+struct kcqe {
+ u32 kcqe_info0;
+ u32 kcqe_info1;
+ u32 kcqe_info2;
+ u32 kcqe_info3;
+ u32 kcqe_info4;
+ u32 kcqe_info5;
+ u32 kcqe_info6;
+ u32 kcqe_op_flag;
+ #define KCQE_RAMROD_COMPLETION (0x1<<27) /* Everest */
+ #define KCQE_FLAGS_LAYER_MASK (0x7<<28)
+ #define KCQE_FLAGS_LAYER_MASK_MISC (0<<28)
+ #define KCQE_FLAGS_LAYER_MASK_L2 (2<<28)
+ #define KCQE_FLAGS_LAYER_MASK_L3 (3<<28)
+ #define KCQE_FLAGS_LAYER_MASK_L4 (4<<28)
+ #define KCQE_FLAGS_LAYER_MASK_L5_RDMA (5<<28)
+ #define KCQE_FLAGS_LAYER_MASK_L5_ISCSI (6<<28)
+ #define KCQE_FLAGS_NEXT (1<<31)
+ #define KCQE_FLAGS_OPCODE_MASK (0xff<<16)
+ #define KCQE_FLAGS_OPCODE_SHIFT (16)
+ #define KCQE_OPCODE(op) \
+ (((op) & KCQE_FLAGS_OPCODE_MASK) >> KCQE_FLAGS_OPCODE_SHIFT)
+};
+
+#define MAX_CNIC_CTL_DATA 64
+#define MAX_DRV_CTL_DATA 64
+
+#define CNIC_CTL_STOP_CMD 1
+#define CNIC_CTL_START_CMD 2
+#define CNIC_CTL_COMPLETION_CMD 3
+
+#define DRV_CTL_IO_WR_CMD 0x101
+#define DRV_CTL_IO_RD_CMD 0x102
+#define DRV_CTL_CTX_WR_CMD 0x103
+#define DRV_CTL_CTXTBL_WR_CMD 0x104
+#define DRV_CTL_COMPLETION_CMD 0x105
+
+struct cnic_ctl_completion {
+ u32 cid;
+};
+
+struct drv_ctl_completion {
+ u32 comp_count;
+};
+
+struct cnic_ctl_info {
+ int cmd;
+ union {
+ struct cnic_ctl_completion comp;
+ char bytes[MAX_CNIC_CTL_DATA];
+ } data;
+};
+
+struct drv_ctl_io {
+ u32 cid_addr;
+ u32 offset;
+ u32 data;
+ dma_addr_t dma_addr;
+};
+
+struct drv_ctl_info {
+ int cmd;
+ union {
+ struct drv_ctl_completion comp;
+ struct drv_ctl_io io;
+ char bytes[MAX_DRV_CTL_DATA];
+ } data;
+};
+
+struct cnic_ops {
+ struct module *cnic_owner;
+ /* Calls to these functions are protected by RCU. When
+ * unregistering, we wait for any calls to complete before
+ * continuing.
+ */
+ int (*cnic_handler)(void *, void *);
+ int (*cnic_ctl)(void *, struct cnic_ctl_info *);
+};
+
+#define MAX_CNIC_VEC 8
+
+struct cnic_irq {
+ unsigned int vector;
+ void *status_blk;
+ u32 status_blk_num;
+ u32 irq_flags;
+#define CNIC_IRQ_FL_MSIX 0x00000001
+};
+
+struct cnic_eth_dev {
+ struct module *drv_owner;
+ u32 drv_state;
+#define CNIC_DRV_STATE_REGD 0x00000001
+#define CNIC_DRV_STATE_USING_MSIX 0x00000002
+ u32 chip_id;
+ u32 max_kwqe_pending;
+ struct pci_dev *pdev;
+ void __iomem *io_base;
+
+ u32 ctx_tbl_offset;
+ u32 ctx_tbl_len;
+ int ctx_blk_size;
+ u32 starting_cid;
+ u32 max_iscsi_conn;
+ u32 max_fcoe_conn;
+ u32 max_rdma_conn;
+ u32 reserved0[2];
+
+ int num_irq;
+ struct cnic_irq irq_arr[MAX_CNIC_VEC];
+ int (*drv_register_cnic)(struct net_device *,
+ struct cnic_ops *, void *);
+ int (*drv_unregister_cnic)(struct net_device *);
+ int (*drv_submit_kwqes_32)(struct net_device *,
+ struct kwqe *[], u32);
+ int (*drv_submit_kwqes_16)(struct net_device *,
+ struct kwqe_16 *[], u32);
+ int (*drv_ctl)(struct net_device *, struct drv_ctl_info *);
+ unsigned long reserved1[2];
+};
+
+struct cnic_sockaddr {
+ union {
+ struct sockaddr_in v4;
+ struct sockaddr_in6 v6;
+ } local;
+ union {
+ struct sockaddr_in v4;
+ struct sockaddr_in6 v6;
+ } remote;
+};
+
+struct cnic_sock {
+ struct cnic_dev *dev;
+ void *context;
+ u32 src_ip[4];
+ u32 dst_ip[4];
+ u16 src_port;
+ u16 dst_port;
+ u16 vlan_id;
+ unsigned char old_ha[6];
+ unsigned char ha[6];
+ u32 mtu;
+ u32 cid;
+ u32 l5_cid;
+ u32 pg_cid;
+ int ulp_type;
+
+ u32 ka_timeout;
+ u32 ka_interval;
+ u8 ka_max_probe_count;
+ u8 tos;
+ u8 ttl;
+ u8 snd_seq_scale;
+ u32 rcv_buf;
+ u32 snd_buf;
+ u32 seed;
+
+ unsigned long tcp_flags;
+#define SK_TCP_NO_DELAY_ACK 0x1
+#define SK_TCP_KEEP_ALIVE 0x2
+#define SK_TCP_NAGLE 0x4
+#define SK_TCP_TIMESTAMP 0x8
+#define SK_TCP_SACK 0x10
+#define SK_TCP_SEG_SCALING 0x20
+ unsigned long flags;
+#define SK_F_INUSE 0
+#define SK_F_OFFLD_COMPLETE 1
+#define SK_F_OFFLD_SCHED 2
+#define SK_F_PG_OFFLD_COMPLETE 3
+#define SK_F_CONNECT_START 4
+#define SK_F_IPV6 5
+#define SK_F_CLOSING 7
+
+ atomic_t ref_count;
+ u32 state;
+ struct kwqe kwqe1;
+ struct kwqe kwqe2;
+ struct kwqe kwqe3;
+};
+
+struct cnic_dev {
+ struct net_device *netdev;
+ struct pci_dev *pcidev;
+ void __iomem *regview;
+ struct list_head list;
+
+ int (*register_device)(struct cnic_dev *dev, int ulp_type,
+ void *ulp_ctx);
+ int (*unregister_device)(struct cnic_dev *dev, int ulp_type);
+ int (*submit_kwqes)(struct cnic_dev *dev, struct kwqe *wqes[],
+ u32 num_wqes);
+ int (*submit_kwqes_16)(struct cnic_dev *dev, struct kwqe_16 *wqes[],
+ u32 num_wqes);
+
+ int (*cm_create)(struct cnic_dev *, int, u32, u32, struct cnic_sock **,
+ void *);
+ int (*cm_destroy)(struct cnic_sock *);
+ int (*cm_connect)(struct cnic_sock *, struct cnic_sockaddr *);
+ int (*cm_abort)(struct cnic_sock *);
+ int (*cm_close)(struct cnic_sock *);
+ struct cnic_dev *(*cm_select_dev)(struct sockaddr_in *, int ulp_type);
+ int (*iscsi_nl_msg_recv)(struct cnic_dev *dev, u32 msg_type,
+ char *data, u16 data_size);
+ unsigned long flags;
+#define CNIC_F_CNIC_UP 1
+#define CNIC_F_BNX2_CLASS 3
+#define CNIC_F_BNX2X_CLASS 4
+ atomic_t ref_count;
+ u8 mac_addr[6];
+
+ int max_iscsi_conn;
+ int max_fcoe_conn;
+ int max_rdma_conn;
+
+ void *cnic_priv;
+};
+
+#define CNIC_WR(dev, off, val) writel(val, dev->regview + off)
+#define CNIC_WR16(dev, off, val) writew(val, dev->regview + off)
+#define CNIC_WR8(dev, off, val) writeb(val, dev->regview + off)
+#define CNIC_RD(dev, off) readl(dev->regview + off)
+#define CNIC_RD16(dev, off) readw(dev->regview + off)
+
+struct cnic_ulp_ops {
+ /* Calls to these functions are protected by RCU. When
+ * unregistering, we wait for any calls to complete before
+ * continuing.
+ */
+
+ void (*cnic_init)(struct cnic_dev *dev);
+ void (*cnic_exit)(struct cnic_dev *dev);
+ void (*cnic_start)(void *ulp_ctx);
+ void (*cnic_stop)(void *ulp_ctx);
+ void (*indicate_kcqes)(void *ulp_ctx, struct kcqe *cqes[],
+ u32 num_cqes);
+ void (*indicate_netevent)(void *ulp_ctx, unsigned long event);
+ void (*cm_connect_complete)(struct cnic_sock *);
+ void (*cm_close_complete)(struct cnic_sock *);
+ void (*cm_abort_complete)(struct cnic_sock *);
+ void (*cm_remote_close)(struct cnic_sock *);
+ void (*cm_remote_abort)(struct cnic_sock *);
+ void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
+ char *data, u16 data_size);
+ struct module *owner;
+};
+
+extern int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops);
+
+extern int cnic_unregister_driver(int ulp_type);
+
+#endif
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 733fe3b..b2fe5cd 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -11,6 +11,24 @@
#include "zfcp_ext.h"
+#define ZFCP_MODEL_PRIV 0x4
+
+static struct ccw_device_id zfcp_ccw_device_id[] = {
+ { CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
+ { CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, ZFCP_MODEL_PRIV) },
+ {},
+};
+MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
+
+/**
+ * zfcp_ccw_priv_sch - check if subchannel is privileged
+ * @adapter: Adapter/Subchannel to check
+ */
+int zfcp_ccw_priv_sch(struct zfcp_adapter *adapter)
+{
+ return adapter->ccw_device->id.dev_model == ZFCP_MODEL_PRIV;
+}
+
/**
* zfcp_ccw_probe - probe function of zfcp driver
* @ccw_device: pointer to belonging ccw device
@@ -176,8 +194,8 @@
"ccnoti4", NULL);
break;
case CIO_BOXED:
- dev_warn(&adapter->ccw_device->dev,
- "The ccw device did not respond in time.\n");
+ dev_warn(&adapter->ccw_device->dev, "The FCP device "
+ "did not respond within the specified time\n");
zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti5", NULL);
break;
}
@@ -199,14 +217,6 @@
up(&zfcp_data.config_sema);
}
-static struct ccw_device_id zfcp_ccw_device_id[] = {
- { CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x3) },
- { CCW_DEVICE_DEVTYPE(0x1731, 0x3, 0x1732, 0x4) }, /* priv. */
- {},
-};
-
-MODULE_DEVICE_TABLE(ccw, zfcp_ccw_device_id);
-
static struct ccw_driver zfcp_ccw_driver = {
.owner = THIS_MODULE,
.name = "zfcp",
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 0a1a5dd..b99b87c 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -163,7 +163,7 @@
}
response->fsf_command = fsf_req->fsf_command;
- response->fsf_reqid = (unsigned long)fsf_req;
+ response->fsf_reqid = fsf_req->req_id;
response->fsf_seqno = fsf_req->seq_no;
response->fsf_issued = fsf_req->issued;
response->fsf_prot_status = qtcb->prefix.prot_status;
@@ -737,7 +737,7 @@
spin_lock_irqsave(&adapter->san_dbf_lock, flags);
memset(r, 0, sizeof(*r));
strncpy(r->tag, "octc", ZFCP_DBF_TAG_SIZE);
- r->fsf_reqid = (unsigned long)fsf_req;
+ r->fsf_reqid = fsf_req->req_id;
r->fsf_seqno = fsf_req->seq_no;
r->s_id = fc_host_port_id(adapter->scsi_host);
r->d_id = wka_port->d_id;
@@ -773,7 +773,7 @@
spin_lock_irqsave(&adapter->san_dbf_lock, flags);
memset(r, 0, sizeof(*r));
strncpy(r->tag, "rctc", ZFCP_DBF_TAG_SIZE);
- r->fsf_reqid = (unsigned long)fsf_req;
+ r->fsf_reqid = fsf_req->req_id;
r->fsf_seqno = fsf_req->seq_no;
r->s_id = wka_port->d_id;
r->d_id = fc_host_port_id(adapter->scsi_host);
@@ -803,7 +803,7 @@
spin_lock_irqsave(&adapter->san_dbf_lock, flags);
memset(rec, 0, sizeof(*rec));
strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
- rec->fsf_reqid = (unsigned long)fsf_req;
+ rec->fsf_reqid = fsf_req->req_id;
rec->fsf_seqno = fsf_req->seq_no;
rec->s_id = s_id;
rec->d_id = d_id;
@@ -965,7 +965,7 @@
ZFCP_DBF_SCSI_FCP_SNS_INFO);
}
- rec->fsf_reqid = (unsigned long)fsf_req;
+ rec->fsf_reqid = fsf_req->req_id;
rec->fsf_seqno = fsf_req->seq_no;
rec->fsf_issued = fsf_req->issued;
}
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 4c362a9..2074d45 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -47,13 +47,6 @@
/********************* CIO/QDIO SPECIFIC DEFINES *****************************/
-/* Adapter Identification Parameters */
-#define ZFCP_CONTROL_UNIT_TYPE 0x1731
-#define ZFCP_CONTROL_UNIT_MODEL 0x03
-#define ZFCP_DEVICE_TYPE 0x1732
-#define ZFCP_DEVICE_MODEL 0x03
-#define ZFCP_DEVICE_MODEL_PRIV 0x04
-
/* DMQ bug workaround: don't use last SBALE */
#define ZFCP_MAX_SBALES_PER_SBAL (QDIO_MAX_ELEMENTS_PER_BUFFER - 1)
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index fdc9b43..e50ea46 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -880,6 +880,7 @@
zfcp_port_put(port);
return ZFCP_ERP_CONTINUES;
}
+ /* fall through */
case ZFCP_ERP_STEP_NAMESERVER_LOOKUP:
if (!port->d_id)
return ZFCP_ERP_FAILED;
@@ -894,8 +895,13 @@
act->step = ZFCP_ERP_STEP_PORT_CLOSING;
return ZFCP_ERP_CONTINUES;
}
- /* fall through otherwise */
}
+ if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) {
+ port->d_id = 0;
+ _zfcp_erp_port_reopen(port, 0, "erpsoc1", NULL);
+ return ZFCP_ERP_EXIT;
+ }
+ /* fall through otherwise */
}
return ZFCP_ERP_FAILED;
}
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 2e31b53..120a9a1 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -27,6 +27,7 @@
/* zfcp_ccw.c */
extern int zfcp_ccw_register(void);
+extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
extern struct zfcp_adapter *zfcp_get_adapter_by_busid(char *);
/* zfcp_cfdc.c */
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 19ae084..bb2752b 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -150,9 +150,14 @@
struct zfcp_port *port;
read_lock_irqsave(&zfcp_data.config_lock, flags);
- list_for_each_entry(port, &fsf_req->adapter->port_list_head, list)
+ list_for_each_entry(port, &fsf_req->adapter->port_list_head, list) {
if ((port->d_id & range) == (elem->nport_did & range))
zfcp_test_link(port);
+ if (!port->d_id)
+ zfcp_erp_port_reopen(port,
+ ZFCP_STATUS_COMMON_ERP_FAILED,
+ "fcrscn1", NULL);
+ }
read_unlock_irqrestore(&zfcp_data.config_lock, flags);
}
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 74dee32..e6dae37 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -526,6 +526,7 @@
break;
case FSF_TOPO_AL:
fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
+ /* fall through */
default:
dev_err(&adapter->ccw_device->dev,
"Unknown or unsupported arbitrated loop "
@@ -897,6 +898,7 @@
switch (fsq->word[0]) {
case FSF_SQ_INVOKE_LINK_TEST_PROCEDURE:
zfcp_test_link(unit->port);
+ /* fall through */
case FSF_SQ_ULP_DEPENDENT_ERP_REQUIRED:
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
@@ -993,6 +995,7 @@
break;
case FSF_PORT_HANDLE_NOT_VALID:
zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req);
+ /* fall through */
case FSF_GENERIC_COMMAND_REJECTED:
case FSF_PAYLOAD_SIZE_MISMATCH:
case FSF_REQUEST_SIZE_TOO_LARGE:
@@ -1399,7 +1402,7 @@
struct fsf_plogi *plogi;
if (req->status & ZFCP_STATUS_FSFREQ_ERROR)
- return;
+ goto out;
switch (header->fsf_status) {
case FSF_PORT_ALREADY_OPEN:
@@ -1461,6 +1464,9 @@
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
break;
}
+
+out:
+ zfcp_port_put(port);
}
/**
@@ -1473,6 +1479,7 @@
struct qdio_buffer_element *sbale;
struct zfcp_adapter *adapter = erp_action->adapter;
struct zfcp_fsf_req *req;
+ struct zfcp_port *port = erp_action->port;
int retval = -EIO;
spin_lock_bh(&adapter->req_q_lock);
@@ -1493,16 +1500,18 @@
sbale[1].flags |= SBAL_FLAGS_LAST_ENTRY;
req->handler = zfcp_fsf_open_port_handler;
- req->qtcb->bottom.support.d_id = erp_action->port->d_id;
- req->data = erp_action->port;
+ req->qtcb->bottom.support.d_id = port->d_id;
+ req->data = port;
req->erp_action = erp_action;
erp_action->fsf_req = req;
+ zfcp_port_get(port);
zfcp_fsf_start_erp_timer(req);
retval = zfcp_fsf_req_send(req);
if (retval) {
zfcp_fsf_req_free(req);
erp_action->fsf_req = NULL;
+ zfcp_port_put(port);
}
out:
spin_unlock_bh(&adapter->req_q_lock);
@@ -1590,8 +1599,10 @@
case FSF_MAXIMUM_NUMBER_OF_PORTS_EXCEEDED:
dev_warn(&req->adapter->ccw_device->dev,
"Opening WKA port 0x%x failed\n", wka_port->d_id);
+ /* fall through */
case FSF_ADAPTER_STATUS_AVAILABLE:
req->status |= ZFCP_STATUS_FSFREQ_ERROR;
+ /* fall through */
case FSF_ACCESS_DENIED:
wka_port->status = ZFCP_WKA_PORT_OFFLINE;
break;
@@ -1876,7 +1887,7 @@
if (!(adapter->connection_features & FSF_FEATURE_NPIV_MODE) &&
(adapter->adapter_features & FSF_FEATURE_LUN_SHARING) &&
- (adapter->ccw_device->id.dev_model != ZFCP_DEVICE_MODEL_PRIV)) {
+ !zfcp_ccw_priv_sch(adapter)) {
exclusive = (bottom->lun_access_info &
FSF_UNIT_ACCESS_EXCLUSIVE);
readwrite = (bottom->lun_access_info &
@@ -2314,7 +2325,7 @@
{
struct zfcp_fsf_req *req;
struct fcp_cmnd_iu *fcp_cmnd_iu;
- unsigned int sbtype;
+ unsigned int sbtype = SBAL_FLAGS0_TYPE_READ;
int real_bytes, retval = -EIO;
struct zfcp_adapter *adapter = unit->port->adapter;
@@ -2356,11 +2367,9 @@
switch (scsi_cmnd->sc_data_direction) {
case DMA_NONE:
req->qtcb->bottom.io.data_direction = FSF_DATADIR_CMND;
- sbtype = SBAL_FLAGS0_TYPE_READ;
break;
case DMA_FROM_DEVICE:
req->qtcb->bottom.io.data_direction = FSF_DATADIR_READ;
- sbtype = SBAL_FLAGS0_TYPE_READ;
fcp_cmnd_iu->rddata = 1;
break;
case DMA_TO_DEVICE:
@@ -2369,8 +2378,6 @@
fcp_cmnd_iu->wddata = 1;
break;
case DMA_BIDIRECTIONAL:
- default:
- retval = -EIO;
goto failed_scsi_cmnd;
}
@@ -2394,9 +2401,7 @@
scsi_sglist(scsi_cmnd),
FSF_MAX_SBALS_PER_REQ);
if (unlikely(real_bytes < 0)) {
- if (req->sbal_number < FSF_MAX_SBALS_PER_REQ)
- retval = -EIO;
- else {
+ if (req->sbal_number >= FSF_MAX_SBALS_PER_REQ) {
dev_err(&adapter->ccw_device->dev,
"Oversize data package, unit 0x%016Lx "
"on port 0x%016Lx closed\n",
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index e8fbeae..7d0da23 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -12,6 +12,10 @@
#include "zfcp_ext.h"
#include <asm/atomic.h>
+static unsigned int default_depth = 32;
+module_param_named(queue_depth, default_depth, uint, 0600);
+MODULE_PARM_DESC(queue_depth, "Default queue depth for new SCSI devices");
+
/* Find start of Sense Information in FCP response unit*/
char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *fcp_rsp_iu)
{
@@ -24,6 +28,12 @@
return fcp_sns_info_ptr;
}
+static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth)
+{
+ scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
+ return sdev->queue_depth;
+}
+
static void zfcp_scsi_slave_destroy(struct scsi_device *sdpnt)
{
struct zfcp_unit *unit = (struct zfcp_unit *) sdpnt->hostdata;
@@ -34,7 +44,7 @@
static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
{
if (sdp->tagged_supported)
- scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, 32);
+ scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, default_depth);
else
scsi_adjust_queue_depth(sdp, 0, 1);
return 0;
@@ -647,6 +657,7 @@
.name = "zfcp",
.module = THIS_MODULE,
.proc_name = "zfcp",
+ .change_queue_depth = zfcp_scsi_change_queue_depth,
.slave_alloc = zfcp_scsi_slave_alloc,
.slave_configure = zfcp_scsi_slave_configure,
.slave_destroy = zfcp_scsi_slave_destroy,
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index fb27407..6a19ed9 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -191,20 +191,19 @@
it has an enclosure device. Selecting this option will just allow
certain enclosure conditions to be reported and is not required.
-comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
- depends on SCSI
-
config SCSI_MULTI_LUN
bool "Probe all LUNs on each SCSI device"
depends on SCSI
help
- If you have a SCSI device that supports more than one LUN (Logical
- Unit Number), e.g. a CD jukebox, and only one LUN is detected, you
- can say Y here to force the SCSI driver to probe for multiple LUNs.
- A SCSI device with multiple LUNs acts logically like multiple SCSI
- devices. The vast majority of SCSI devices have only one LUN, and
- so most people can say N here. The max_luns boot/module parameter
- allows to override this setting.
+ Some devices support more than one LUN (Logical Unit Number) in order
+ to allow access to several media, e.g. CD jukebox, USB card reader,
+ mobile phone in mass storage mode. This option forces the kernel to
+ probe for all LUNs by default. This setting can be overriden by
+ max_luns boot/module parameter. Note that this option does not affect
+ devices conforming to SCSI-3 or higher as they can explicitely report
+ their number of LUNs. It is safe to say Y here unless you have one of
+ those rare devices which reacts in an unexpected way when probed for
+ multiple LUNs.
config SCSI_CONSTANTS
bool "Verbose SCSI error reporting (kernel size +=12K)"
@@ -355,6 +354,7 @@
http://open-iscsi.org
source "drivers/scsi/cxgb3i/Kconfig"
+source "drivers/scsi/bnx2i/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
@@ -508,6 +508,7 @@
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
+source "drivers/scsi/mvsas/Kconfig"
config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
@@ -1050,16 +1051,6 @@
Generally, saying N is fine.
-config SCSI_MVSAS
- tristate "Marvell 88SE6440 SAS/SATA support"
- depends on PCI && SCSI
- select SCSI_SAS_LIBSAS
- help
- This driver supports Marvell SAS/SATA PCI devices.
-
- To compiler this driver as a module, choose M here: the module
- will be called mvsas.
-
config SCSI_NCR53C406A
tristate "NCR53c406a SCSI support"
depends on ISA && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index a5049cf..25429ea 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -126,9 +126,10 @@
obj-$(CONFIG_SCSI_IBMVFC) += ibmvscsi/
obj-$(CONFIG_SCSI_HPTIOP) += hptiop.o
obj-$(CONFIG_SCSI_STEX) += stex.o
-obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
+obj-$(CONFIG_SCSI_MVSAS) += mvsas/
obj-$(CONFIG_PS3_ROM) += ps3rom.o
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgb3i/
+obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/
obj-$(CONFIG_ARM) += arm/
diff --git a/drivers/scsi/NCR_D700.c b/drivers/scsi/NCR_D700.c
index c889d84..1cdf09a 100644
--- a/drivers/scsi/NCR_D700.c
+++ b/drivers/scsi/NCR_D700.c
@@ -224,7 +224,7 @@
return ret;
}
-static int
+static irqreturn_t
NCR_D700_intr(int irq, void *data)
{
struct NCR_D700_private *p = (struct NCR_D700_private *)data;
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_constants.h b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
new file mode 100644
index 0000000..2fceb19
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
@@ -0,0 +1,155 @@
+/* 57xx_iscsi_constants.h: Broadcom NetXtreme II iSCSI HSI
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_CONSTANTS_H_
+#define __57XX_ISCSI_CONSTANTS_H_
+
+/**
+* This file defines HSI constants for the iSCSI flows
+*/
+
+/* iSCSI request op codes */
+#define ISCSI_OPCODE_CLEANUP_REQUEST (7)
+
+/* iSCSI response/messages op codes */
+#define ISCSI_OPCODE_CLEANUP_RESPONSE (0x27)
+#define ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION (0)
+
+/* iSCSI task types */
+#define ISCSI_TASK_TYPE_READ (0)
+#define ISCSI_TASK_TYPE_WRITE (1)
+#define ISCSI_TASK_TYPE_MPATH (2)
+
+/* initial CQ sequence numbers */
+#define ISCSI_INITIAL_SN (1)
+
+/* KWQ (kernel work queue) layer codes */
+#define ISCSI_KWQE_LAYER_CODE (6)
+
+/* KWQ (kernel work queue) request op codes */
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN1 (0)
+#define ISCSI_KWQE_OPCODE_OFFLOAD_CONN2 (1)
+#define ISCSI_KWQE_OPCODE_UPDATE_CONN (2)
+#define ISCSI_KWQE_OPCODE_DESTROY_CONN (3)
+#define ISCSI_KWQE_OPCODE_INIT1 (4)
+#define ISCSI_KWQE_OPCODE_INIT2 (5)
+
+/* KCQ (kernel completion queue) response op codes */
+#define ISCSI_KCQE_OPCODE_OFFLOAD_CONN (0x10)
+#define ISCSI_KCQE_OPCODE_UPDATE_CONN (0x12)
+#define ISCSI_KCQE_OPCODE_DESTROY_CONN (0x13)
+#define ISCSI_KCQE_OPCODE_INIT (0x14)
+#define ISCSI_KCQE_OPCODE_FW_CLEAN_TASK (0x15)
+#define ISCSI_KCQE_OPCODE_TCP_RESET (0x16)
+#define ISCSI_KCQE_OPCODE_TCP_SYN (0x17)
+#define ISCSI_KCQE_OPCODE_TCP_FIN (0X18)
+#define ISCSI_KCQE_OPCODE_TCP_ERROR (0x19)
+#define ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20)
+#define ISCSI_KCQE_OPCODE_ISCSI_ERROR (0x21)
+
+/* KCQ (kernel completion queue) completion status */
+#define ISCSI_KCQE_COMPLETION_STATUS_SUCCESS (0x0)
+#define ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE (0x1)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE (0x2)
+#define ISCSI_KCQE_COMPLETION_STATUS_CTX_FREE_FAILURE (0x3)
+#define ISCSI_KCQE_COMPLETION_STATUS_NIC_ERROR (0x4)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR (0x5)
+#define ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR (0x6)
+
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_UNEXPECTED_OPCODE (0xa)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE (0xb)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN (0xc)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT (0xd)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN (0xe)
+
+/* Response */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN (0xf)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T (0x10)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_IS_ZERO (0x2c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_TOO_BIG (0x2d)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0 (0x11)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1 (0x12)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2 (0x13)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3 (0x14)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4 (0x15)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5 (0x16)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6 (0x17)
+
+/* Data-In */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN (0x18)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN (0x19)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO (0x1a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV (0x1b)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN (0x1c)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN (0x1d)
+
+/* R2T */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF (0x1f)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN (0x20)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN (0x21)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0 (0x22)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1 (0x23)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED (0x24)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV (0x25)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN (0x26)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO (0x27)
+
+/* TMF */
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN (0x28)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN (0x29)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN (0x2a)
+#define ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP (0x2b)
+
+/* IP/TCP processing errors: */
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT (0x40)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS (0x41)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG (0x42)
+#define ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_MAX_RTRANS (0x43)
+
+/* iSCSI licensing errors */
+/* general iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED (0x50)
+/* additional LOM specific iSCSI license not installed */
+#define ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED (0x51)
+
+/* SQ/RQ/CQ DB structure sizes */
+#define ISCSI_SQ_DB_SIZE (16)
+#define ISCSI_RQ_DB_SIZE (16)
+#define ISCSI_CQ_DB_SIZE (80)
+
+#define ISCSI_SQN_TO_NOTIFY_NOT_VALID 0xFFFF
+
+/* Page size codes (for flags field in connection offload request) */
+#define ISCSI_PAGE_SIZE_256 (0)
+#define ISCSI_PAGE_SIZE_512 (1)
+#define ISCSI_PAGE_SIZE_1K (2)
+#define ISCSI_PAGE_SIZE_2K (3)
+#define ISCSI_PAGE_SIZE_4K (4)
+#define ISCSI_PAGE_SIZE_8K (5)
+#define ISCSI_PAGE_SIZE_16K (6)
+#define ISCSI_PAGE_SIZE_32K (7)
+#define ISCSI_PAGE_SIZE_64K (8)
+#define ISCSI_PAGE_SIZE_128K (9)
+#define ISCSI_PAGE_SIZE_256K (10)
+#define ISCSI_PAGE_SIZE_512K (11)
+#define ISCSI_PAGE_SIZE_1M (12)
+#define ISCSI_PAGE_SIZE_2M (13)
+#define ISCSI_PAGE_SIZE_4M (14)
+#define ISCSI_PAGE_SIZE_8M (15)
+
+/* Iscsi PDU related defines */
+#define ISCSI_HEADER_SIZE (48)
+#define ISCSI_DIGEST_SHIFT (2)
+#define ISCSI_DIGEST_SIZE (4)
+
+#define B577XX_ISCSI_CONNECTION_TYPE 3
+
+#endif /*__57XX_ISCSI_CONSTANTS_H_ */
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
new file mode 100644
index 0000000..36af1af
--- /dev/null
+++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
@@ -0,0 +1,1509 @@
+/* 57xx_iscsi_hsi.h: Broadcom NetXtreme II iSCSI HSI.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+#ifndef __57XX_ISCSI_HSI_LINUX_LE__
+#define __57XX_ISCSI_HSI_LINUX_LE__
+
+/*
+ * iSCSI Async CQE
+ */
+struct bnx2i_async_msg {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved5;
+ u8 err_code;
+ u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved4;
+ u8 err_code;
+ u16 reserved5;
+#endif
+ u32 reserved6;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u8 async_event;
+ u8 async_vcode;
+ u16 param1;
+#elif defined(__LITTLE_ENDIAN)
+ u16 param1;
+ u8 async_vcode;
+ u8 async_event;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 param2;
+ u16 param3;
+#elif defined(__LITTLE_ENDIAN)
+ u16 param3;
+ u16 param2;
+#endif
+ u32 reserved7[3];
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Buffer Descriptor (BD)
+ */
+struct iscsi_bd {
+ u32 buffer_addr_hi;
+ u32 buffer_addr_lo;
+#if defined(__BIG_ENDIAN)
+ u16 reserved0;
+ u16 buffer_length;
+#elif defined(__LITTLE_ENDIAN)
+ u16 buffer_length;
+ u16 reserved0;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+#elif defined(__LITTLE_ENDIAN)
+ u16 flags;
+#define ISCSI_BD_RESERVED1 (0x3F<<0)
+#define ISCSI_BD_RESERVED1_SHIFT 0
+#define ISCSI_BD_LAST_IN_BD_CHAIN (0x1<<6)
+#define ISCSI_BD_LAST_IN_BD_CHAIN_SHIFT 6
+#define ISCSI_BD_FIRST_IN_BD_CHAIN (0x1<<7)
+#define ISCSI_BD_FIRST_IN_BD_CHAIN_SHIFT 7
+#define ISCSI_BD_RESERVED2 (0xFF<<8)
+#define ISCSI_BD_RESERVED2_SHIFT 8
+ u16 reserved3;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup SQ WQE
+ */
+struct bnx2i_cleanup_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2[3];
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CLEANUP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_REQUEST_TYPE_SHIFT 14
+ u16 reserved3;
+#endif
+ u32 reserved4[10];
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved6;
+ u16 reserved5;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved5;
+ u8 reserved6;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Cleanup CQE
+ */
+struct bnx2i_cleanup_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 status;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 status;
+ u8 op_code;
+#endif
+ u32 reserved1[3];
+ u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5[7];
+#if defined(__BIG_ENDIAN)
+ u16 reserved6;
+ u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CLEANUP_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CLEANUP_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CLEANUP_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CLEANUP_RESPONSE_TYPE_SHIFT 14
+ u16 reserved6;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * SCSI read/write SQ WQE
+ */
+struct bnx2i_cmd_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_CMD_REQUEST_TASK_ATTR (0x7<<0)
+#define ISCSI_CMD_REQUEST_TASK_ATTR_SHIFT 0
+#define ISCSI_CMD_REQUEST_RESERVED1 (0x3<<3)
+#define ISCSI_CMD_REQUEST_RESERVED1_SHIFT 3
+#define ISCSI_CMD_REQUEST_WRITE (0x1<<5)
+#define ISCSI_CMD_REQUEST_WRITE_SHIFT 5
+#define ISCSI_CMD_REQUEST_READ (0x1<<6)
+#define ISCSI_CMD_REQUEST_READ_SHIFT 6
+#define ISCSI_CMD_REQUEST_FINAL (0x1<<7)
+#define ISCSI_CMD_REQUEST_FINAL_SHIFT 7
+ u8 op_code;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 ud_buffer_offset;
+ u16 sd_buffer_offset;
+#elif defined(__LITTLE_ENDIAN)
+ u16 sd_buffer_offset;
+ u16 ud_buffer_offset;
+#endif
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CMD_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_REQUEST_INDEX_SHIFT 0
+#define ISCSI_CMD_REQUEST_TYPE (0x3<<14)
+#define ISCSI_CMD_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+ u32 total_data_transfer_length;
+ u32 cmd_sn;
+ u32 reserved3;
+ u32 cdb[4];
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 sd_start_bd_index;
+ u8 ud_start_bd_index;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 ud_start_bd_index;
+ u8 sd_start_bd_index;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * task statistics for write response
+ */
+struct bnx2i_write_resp_task_stat {
+ u32 num_data_ins;
+};
+
+/*
+ * task statistics for read response
+ */
+struct bnx2i_read_resp_task_stat {
+#if defined(__BIG_ENDIAN)
+ u16 num_data_outs;
+ u16 num_r2ts;
+#elif defined(__LITTLE_ENDIAN)
+ u16 num_r2ts;
+ u16 num_data_outs;
+#endif
+};
+
+/*
+ * task statistics for iSCSI cmd response
+ */
+union bnx2i_cmd_resp_task_stat {
+ struct bnx2i_write_resp_task_stat write_stat;
+ struct bnx2i_read_resp_task_stat read_stat;
+};
+
+/*
+ * SCSI Command CQE
+ */
+struct bnx2i_cmd_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+ u8 response;
+ u8 status;
+#elif defined(__LITTLE_ENDIAN)
+ u8 status;
+ u8 response;
+ u8 response_flags;
+#define ISCSI_CMD_RESPONSE_RESERVED0 (0x1<<0)
+#define ISCSI_CMD_RESPONSE_RESERVED0_SHIFT 0
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW (0x1<<1)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_UNDERFLOW_SHIFT 1
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW (0x1<<2)
+#define ISCSI_CMD_RESPONSE_RESIDUAL_OVERFLOW_SHIFT 2
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW (0x1<<3)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_UNDERFLOW_SHIFT 3
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW (0x1<<4)
+#define ISCSI_CMD_RESPONSE_BR_RESIDUAL_OVERFLOW_SHIFT 4
+#define ISCSI_CMD_RESPONSE_RESERVED1 (0x7<<5)
+#define ISCSI_CMD_RESPONSE_RESERVED1_SHIFT 5
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved2;
+ u32 residual_count;
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5[5];
+ union bnx2i_cmd_resp_task_stat task_stat;
+ u32 reserved6;
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_CMD_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_CMD_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_CMD_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_CMD_RESPONSE_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+
+
+/*
+ * firmware middle-path request SQ WQE
+ */
+struct bnx2i_fw_mp_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+ u16 hdr_opaque1;
+#elif defined(__LITTLE_ENDIAN)
+ u16 hdr_opaque1;
+ u8 op_attr;
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 hdr_opaque2[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved0;
+ u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_FW_MP_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_FW_MP_REQUEST_INDEX_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_TYPE (0x3<<14)
+#define ISCSI_FW_MP_REQUEST_TYPE_SHIFT 14
+ u16 reserved0;
+#endif
+ u32 hdr_opaque3[4];
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_FW_MP_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_FW_MP_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 reserved3;
+ u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+ u8 flags;
+#define ISCSI_FW_MP_REQUEST_RESERVED1 (0x1<<0)
+#define ISCSI_FW_MP_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_FW_MP_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_FW_MP_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_FW_MP_REQUEST_RESERVED2 (0x1F<<3)
+#define ISCSI_FW_MP_REQUEST_RESERVED2_SHIFT 3
+ u8 reserved3;
+ u16 reserved4;
+#endif
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved6;
+ u8 reserved5;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved5;
+ u8 reserved6;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * firmware response - CQE: used only by firmware
+ */
+struct bnx2i_fw_response {
+ u32 hdr_dword1[2];
+ u32 hdr_exp_cmd_sn;
+ u32 hdr_max_cmd_sn;
+ u32 hdr_ttt;
+ u32 hdr_res_cnt;
+ u32 cqe_flags;
+#define ISCSI_FW_RESPONSE_RESERVED2 (0xFF<<0)
+#define ISCSI_FW_RESPONSE_RESERVED2_SHIFT 0
+#define ISCSI_FW_RESPONSE_ERR_CODE (0xFF<<8)
+#define ISCSI_FW_RESPONSE_ERR_CODE_SHIFT 8
+#define ISCSI_FW_RESPONSE_RESERVED3 (0xFFFF<<16)
+#define ISCSI_FW_RESPONSE_RESERVED3_SHIFT 16
+ u32 stat_sn;
+ u32 hdr_dword2[2];
+ u32 hdr_dword3[2];
+ u32 task_stat;
+ u32 reserved0;
+ u32 hdr_itt;
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI KCQ CQE parameters
+ */
+union iscsi_kcqe_params {
+ u32 reserved0[4];
+};
+
+/*
+ * iSCSI KCQ CQE
+ */
+struct iscsi_kcqe {
+ u32 iscsi_conn_id;
+ u32 completion_status;
+ u32 iscsi_conn_context_id;
+ union iscsi_kcqe_params params;
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+ u8 op_code;
+ u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+ u16 qe_self_seq;
+ u8 op_code;
+ u8 flags;
+#define ISCSI_KCQE_RESERVED0 (0xF<<0)
+#define ISCSI_KCQE_RESERVED0_SHIFT 0
+#define ISCSI_KCQE_LAYER_CODE (0x7<<4)
+#define ISCSI_KCQE_LAYER_CODE_SHIFT 4
+#define ISCSI_KCQE_RESERVED1 (0x1<<7)
+#define ISCSI_KCQE_RESERVED1_SHIFT 7
+#endif
+};
+
+
+
+/*
+ * iSCSI KWQE header
+ */
+struct iscsi_kwqe_header {
+#if defined(__BIG_ENDIAN)
+ u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+ u8 op_code;
+#elif defined(__LITTLE_ENDIAN)
+ u8 op_code;
+ u8 flags;
+#define ISCSI_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define ISCSI_KWQE_HEADER_RESERVED0_SHIFT 0
+#define ISCSI_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define ISCSI_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define ISCSI_KWQE_HEADER_RESERVED1_SHIFT 7
+#endif
+};
+
+/*
+ * iSCSI firmware init request 1
+ */
+struct iscsi_kwqe_init1 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u8 reserved0;
+ u8 num_cqs;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_cqs;
+ u8 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 dummy_buffer_addr_lo;
+ u32 dummy_buffer_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u16 num_ccells_per_conn;
+ u16 num_tasks_per_conn;
+#elif defined(__LITTLE_ENDIAN)
+ u16 num_tasks_per_conn;
+ u16 num_ccells_per_conn;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 sq_wqes_per_page;
+ u16 sq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+ u16 sq_num_wqes;
+ u16 sq_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 cq_log_wqes_per_page;
+ u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+ u16 cq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+ u16 cq_num_wqes;
+ u8 flags;
+#define ISCSI_KWQE_INIT1_PAGE_SIZE (0xF<<0)
+#define ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT 0
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE (0x1<<4)
+#define ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE_SHIFT 4
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE (0x1<<5)
+#define ISCSI_KWQE_INIT1_KEEP_ALIVE_ENABLE_SHIFT 5
+#define ISCSI_KWQE_INIT1_RESERVED1 (0x3<<6)
+#define ISCSI_KWQE_INIT1_RESERVED1_SHIFT 6
+ u8 cq_log_wqes_per_page;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 cq_num_pages;
+ u16 sq_num_pages;
+#elif defined(__LITTLE_ENDIAN)
+ u16 sq_num_pages;
+ u16 cq_num_pages;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 rq_buffer_size;
+ u16 rq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+ u16 rq_num_wqes;
+ u16 rq_buffer_size;
+#endif
+};
+
+/*
+ * iSCSI firmware init request 2
+ */
+struct iscsi_kwqe_init2 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 max_cq_sqn;
+#elif defined(__LITTLE_ENDIAN)
+ u16 max_cq_sqn;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 error_bit_map[2];
+ u32 reserved1[5];
+};
+
+/*
+ * Initial iSCSI connection offload request 1
+ */
+struct iscsi_kwqe_conn_offload1 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+ u16 iscsi_conn_id;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 sq_page_table_addr_lo;
+ u32 sq_page_table_addr_hi;
+ u32 cq_page_table_addr_lo;
+ u32 cq_page_table_addr_hi;
+ u32 reserved0[3];
+};
+
+/*
+ * iSCSI Page Table Entry (PTE)
+ */
+struct iscsi_pte {
+ u32 hi;
+ u32 lo;
+};
+
+/*
+ * Initial iSCSI connection offload request 2
+ */
+struct iscsi_kwqe_conn_offload2 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 rq_page_table_addr_lo;
+ u32 rq_page_table_addr_hi;
+ struct iscsi_pte sq_first_pte;
+ struct iscsi_pte cq_first_pte;
+ u32 num_additional_wqes;
+};
+
+
+/*
+ * Initial iSCSI connection offload request 3
+ */
+struct iscsi_kwqe_conn_offload3 {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 reserved1;
+ struct iscsi_pte qp_first_pte[3];
+};
+
+
+/*
+ * iSCSI connection update request
+ */
+struct iscsi_kwqe_conn_update {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 session_error_recovery_level;
+ u8 max_outstanding_r2ts;
+ u8 reserved2;
+ u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+#elif defined(__LITTLE_ENDIAN)
+ u8 conn_flags;
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST (0x1<<0)
+#define ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST_SHIFT 0
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST (0x1<<1)
+#define ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST_SHIFT 1
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T (0x1<<2)
+#define ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T_SHIFT 2
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA (0x1<<3)
+#define ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA_SHIFT 3
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1 (0xF<<4)
+#define ISCSI_KWQE_CONN_UPDATE_RESERVED1_SHIFT 4
+ u8 reserved2;
+ u8 max_outstanding_r2ts;
+ u8 session_error_recovery_level;
+#endif
+ u32 context_id;
+ u32 max_send_pdu_length;
+ u32 max_recv_pdu_length;
+ u32 first_burst_length;
+ u32 max_burst_length;
+ u32 exp_stat_sn;
+};
+
+/*
+ * iSCSI destroy connection request
+ */
+struct iscsi_kwqe_conn_destroy {
+#if defined(__BIG_ENDIAN)
+ struct iscsi_kwqe_header hdr;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ struct iscsi_kwqe_header hdr;
+#endif
+ u32 context_id;
+ u32 reserved1[6];
+};
+
+/*
+ * iSCSI KWQ WQE
+ */
+union iscsi_kwqe {
+ struct iscsi_kwqe_init1 init1;
+ struct iscsi_kwqe_init2 init2;
+ struct iscsi_kwqe_conn_offload1 conn_offload1;
+ struct iscsi_kwqe_conn_offload2 conn_offload2;
+ struct iscsi_kwqe_conn_update conn_update;
+ struct iscsi_kwqe_conn_destroy conn_destroy;
+};
+
+/*
+ * iSCSI Login SQ WQE
+ */
+struct bnx2i_login_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+ u8 version_max;
+ u8 version_min;
+#elif defined(__LITTLE_ENDIAN)
+ u8 version_min;
+ u8 version_max;
+ u8 op_attr;
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_REQUEST_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_REQUEST_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_REQUEST_CONT (0x1<<6)
+#define ISCSI_LOGIN_REQUEST_CONT_SHIFT 6
+#define ISCSI_LOGIN_REQUEST_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_REQUEST_TRANSIT_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+ u16 isid_hi;
+ u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+ u16 tsih;
+ u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGIN_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGIN_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 cid;
+ u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved3;
+ u16 cid;
+#endif
+ u32 cmd_sn;
+ u32 exp_stat_sn;
+ u32 reserved4;
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+ u16 reserved8;
+ u8 reserved7;
+ u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+#elif defined(__LITTLE_ENDIAN)
+ u8 flags;
+#define ISCSI_LOGIN_REQUEST_RESERVED5 (0x3<<0)
+#define ISCSI_LOGIN_REQUEST_RESERVED5_SHIFT 0
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN (0x1<<2)
+#define ISCSI_LOGIN_REQUEST_UPDATE_EXP_STAT_SN_SHIFT 2
+#define ISCSI_LOGIN_REQUEST_RESERVED6 (0x1F<<3)
+#define ISCSI_LOGIN_REQUEST_RESERVED6_SHIFT 3
+ u8 reserved7;
+ u16 reserved8;
+#endif
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved10;
+ u8 reserved9;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved9;
+ u8 reserved10;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Login CQE
+ */
+struct bnx2i_login_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+ u8 version_max;
+ u8 version_active;
+#elif defined(__LITTLE_ENDIAN)
+ u8 version_active;
+ u8 version_max;
+ u8 response_flags;
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE (0x3<<0)
+#define ISCSI_LOGIN_RESPONSE_NEXT_STAGE_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE (0x3<<2)
+#define ISCSI_LOGIN_RESPONSE_CURRENT_STAGE_SHIFT 2
+#define ISCSI_LOGIN_RESPONSE_RESERVED0 (0x3<<4)
+#define ISCSI_LOGIN_RESPONSE_RESERVED0_SHIFT 4
+#define ISCSI_LOGIN_RESPONSE_CONT (0x1<<6)
+#define ISCSI_LOGIN_RESPONSE_CONT_SHIFT 6
+#define ISCSI_LOGIN_RESPONSE_TRANSIT (0x1<<7)
+#define ISCSI_LOGIN_RESPONSE_TRANSIT_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u8 err_code;
+ u8 reserved2;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved2;
+ u8 err_code;
+ u16 reserved3;
+#endif
+ u32 stat_sn;
+ u32 isid_lo;
+#if defined(__BIG_ENDIAN)
+ u16 isid_hi;
+ u16 tsih;
+#elif defined(__LITTLE_ENDIAN)
+ u16 tsih;
+ u16 isid_hi;
+#endif
+#if defined(__BIG_ENDIAN)
+ u8 status_class;
+ u8 status_detail;
+ u16 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved4;
+ u8 status_detail;
+ u8 status_class;
+#endif
+ u32 reserved5[3];
+#if defined(__BIG_ENDIAN)
+ u16 reserved6;
+ u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGIN_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGIN_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGIN_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGIN_RESPONSE_TYPE_SHIFT 14
+ u16 reserved6;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Logout SQ WQE
+ */
+struct bnx2i_logout_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_LOGOUT_REQUEST_REASON (0x7F<<0)
+#define ISCSI_LOGOUT_REQUEST_REASON_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_LOGOUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 reserved1[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGOUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+#if defined(__BIG_ENDIAN)
+ u16 cid;
+ u16 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved3;
+ u16 cid;
+#endif
+ u32 cmd_sn;
+ u32 reserved4[5];
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved6;
+ u8 reserved5;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved5;
+ u8 reserved6;
+ u8 cq_index;
+#endif
+};
+
+
+/*
+ * iSCSI Logout CQE
+ */
+struct bnx2i_logout_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u8 response;
+ u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved0;
+ u8 response;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved5;
+ u8 err_code;
+ u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved4;
+ u8 err_code;
+ u16 reserved5;
+#endif
+ u32 reserved6[3];
+#if defined(__BIG_ENDIAN)
+ u16 time_to_wait;
+ u16 time_to_retain;
+#elif defined(__LITTLE_ENDIAN)
+ u16 time_to_retain;
+ u16 time_to_wait;
+#endif
+ u32 reserved7[3];
+#if defined(__BIG_ENDIAN)
+ u16 reserved8;
+ u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_LOGOUT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_LOGOUT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_LOGOUT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_LOGOUT_RESPONSE_TYPE_SHIFT 14
+ u16 reserved8;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI Nop-In CQE
+ */
+struct bnx2i_nop_in_msg {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 ttt;
+ u32 reserved2;
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5;
+ u32 lun[2];
+ u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_NOP_IN_MSG_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_IN_MSG_INDEX_SHIFT 0
+#define ISCSI_NOP_IN_MSG_TYPE (0x3<<14)
+#define ISCSI_NOP_IN_MSG_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+
+/*
+ * iSCSI NOP-OUT SQ WQE
+ */
+struct bnx2i_nop_out_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1 (0x7F<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_NOP_OUT_REQUEST_ALWAYS_ONE_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved2;
+ u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_NOP_OUT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_NOP_OUT_REQUEST_TYPE_SHIFT 14
+ u16 reserved2;
+#endif
+ u32 ttt;
+ u32 cmd_sn;
+ u32 reserved3[2];
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_NOP_OUT_REQUEST_NUM_RESP_BDS_SHIFT 24
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u8 reserved6;
+ u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+#elif defined(__LITTLE_ENDIAN)
+ u8 flags;
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4 (0x1<<0)
+#define ISCSI_NOP_OUT_REQUEST_RESERVED4_SHIFT 0
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION (0x1<<1)
+#define ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION_SHIFT 1
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL (0x3F<<2)
+#define ISCSI_NOP_OUT_REQUEST_ZERO_FILL_SHIFT 2
+ u8 reserved6;
+ u16 reserved7;
+#endif
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved9;
+ u8 reserved8;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved8;
+ u8 reserved9;
+ u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Reject CQE
+ */
+struct bnx2i_reject_msg {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u8 reason;
+ u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved0;
+ u8 reason;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved2[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5[8];
+ u32 cq_req_sn;
+};
+
+/*
+ * bnx2i iSCSI TMF SQ WQE
+ */
+struct bnx2i_tmf_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_TMF_REQUEST_FUNCTION (0x7F<<0)
+#define ISCSI_TMF_REQUEST_FUNCTION_SHIFT 0
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE (0x1<<7)
+#define ISCSI_TMF_REQUEST_ALWAYS_ONE_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved1;
+ u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TMF_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TMF_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TMF_REQUEST_TYPE_SHIFT 14
+ u16 reserved1;
+#endif
+ u32 ref_itt;
+ u32 cmd_sn;
+ u32 reserved2;
+ u32 ref_cmd_sn;
+ u32 reserved3[3];
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved5;
+ u8 reserved4;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved4;
+ u8 reserved5;
+ u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI Text SQ WQE
+ */
+struct bnx2i_text_request {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 op_attr;
+#define ISCSI_TEXT_REQUEST_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_REQUEST_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_REQUEST_CONT (0x1<<6)
+#define ISCSI_TEXT_REQUEST_CONT_SHIFT 6
+#define ISCSI_TEXT_REQUEST_FINAL (0x1<<7)
+#define ISCSI_TEXT_REQUEST_FINAL_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 lun[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved3;
+ u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TEXT_REQUEST_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_REQUEST_INDEX_SHIFT 0
+#define ISCSI_TEXT_REQUEST_TYPE (0x3<<14)
+#define ISCSI_TEXT_REQUEST_TYPE_SHIFT 14
+ u16 reserved3;
+#endif
+ u32 ttt;
+ u32 cmd_sn;
+ u32 reserved4[2];
+ u32 resp_bd_list_addr_lo;
+ u32 resp_bd_list_addr_hi;
+ u32 resp_buffer;
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH (0xFFFFFF<<0)
+#define ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH_SHIFT 0
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS (0xFF<<24)
+#define ISCSI_TEXT_REQUEST_NUM_RESP_BDS_SHIFT 24
+ u32 zero_fill;
+ u32 bd_list_addr_lo;
+ u32 bd_list_addr_hi;
+#if defined(__BIG_ENDIAN)
+ u8 cq_index;
+ u8 reserved7;
+ u8 reserved6;
+ u8 num_bds;
+#elif defined(__LITTLE_ENDIAN)
+ u8 num_bds;
+ u8 reserved6;
+ u8 reserved7;
+ u8 cq_index;
+#endif
+};
+
+/*
+ * iSCSI SQ WQE
+ */
+union iscsi_request {
+ struct bnx2i_cmd_request cmd;
+ struct bnx2i_tmf_request tmf;
+ struct bnx2i_nop_out_request nop_out;
+ struct bnx2i_login_request login_req;
+ struct bnx2i_text_request text;
+ struct bnx2i_logout_request logout_req;
+ struct bnx2i_cleanup_request cleanup;
+};
+
+
+/*
+ * iSCSI TMF CQE
+ */
+struct bnx2i_tmf_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 reserved1;
+ u8 response;
+ u8 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved0;
+ u8 response;
+ u8 reserved1;
+ u8 op_code;
+#endif
+ u32 reserved2;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 reserved3[2];
+#if defined(__BIG_ENDIAN)
+ u16 reserved5;
+ u8 err_code;
+ u8 reserved4;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved4;
+ u8 err_code;
+ u16 reserved5;
+#endif
+ u32 reserved6[7];
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TMF_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TMF_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TMF_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TMF_RESPONSE_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+/*
+ * iSCSI Text CQE
+ */
+struct bnx2i_text_response {
+#if defined(__BIG_ENDIAN)
+ u8 op_code;
+ u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+ u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+ u16 reserved0;
+ u8 response_flags;
+#define ISCSI_TEXT_RESPONSE_RESERVED1 (0x3F<<0)
+#define ISCSI_TEXT_RESPONSE_RESERVED1_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_CONT (0x1<<6)
+#define ISCSI_TEXT_RESPONSE_CONT_SHIFT 6
+#define ISCSI_TEXT_RESPONSE_FINAL (0x1<<7)
+#define ISCSI_TEXT_RESPONSE_FINAL_SHIFT 7
+ u8 op_code;
+#endif
+ u32 data_length;
+ u32 exp_cmd_sn;
+ u32 max_cmd_sn;
+ u32 ttt;
+ u32 reserved2;
+#if defined(__BIG_ENDIAN)
+ u16 reserved4;
+ u8 err_code;
+ u8 reserved3;
+#elif defined(__LITTLE_ENDIAN)
+ u8 reserved3;
+ u8 err_code;
+ u16 reserved4;
+#endif
+ u32 reserved5;
+ u32 lun[2];
+ u32 reserved6[4];
+#if defined(__BIG_ENDIAN)
+ u16 reserved7;
+ u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+ u16 itt;
+#define ISCSI_TEXT_RESPONSE_INDEX (0x3FFF<<0)
+#define ISCSI_TEXT_RESPONSE_INDEX_SHIFT 0
+#define ISCSI_TEXT_RESPONSE_TYPE (0x3<<14)
+#define ISCSI_TEXT_RESPONSE_TYPE_SHIFT 14
+ u16 reserved7;
+#endif
+ u32 cq_req_sn;
+};
+
+/*
+ * iSCSI CQE
+ */
+union iscsi_response {
+ struct bnx2i_cmd_response cmd;
+ struct bnx2i_tmf_response tmf;
+ struct bnx2i_login_response login_resp;
+ struct bnx2i_text_response text;
+ struct bnx2i_logout_response logout_resp;
+ struct bnx2i_cleanup_response cleanup;
+ struct bnx2i_reject_msg reject;
+ struct bnx2i_async_msg async;
+ struct bnx2i_nop_in_msg nop_in;
+};
+
+#endif /* __57XX_ISCSI_HSI_LINUX_LE__ */
diff --git a/drivers/scsi/bnx2i/Kconfig b/drivers/scsi/bnx2i/Kconfig
new file mode 100644
index 0000000..820d428
--- /dev/null
+++ b/drivers/scsi/bnx2i/Kconfig
@@ -0,0 +1,7 @@
+config SCSI_BNX2_ISCSI
+ tristate "Broadcom NetXtreme II iSCSI support"
+ select SCSI_ISCSI_ATTRS
+ select CNIC
+ ---help---
+ This driver supports iSCSI offload for the Broadcom NetXtreme II
+ devices.
diff --git a/drivers/scsi/bnx2i/Makefile b/drivers/scsi/bnx2i/Makefile
new file mode 100644
index 0000000..b5802bd
--- /dev/null
+++ b/drivers/scsi/bnx2i/Makefile
@@ -0,0 +1,3 @@
+bnx2i-y := bnx2i_init.o bnx2i_hwi.o bnx2i_iscsi.o bnx2i_sysfs.o
+
+obj-$(CONFIG_SCSI_BNX2_ISCSI) += bnx2i.o
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
new file mode 100644
index 0000000..d7576f2
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -0,0 +1,771 @@
+/* bnx2i.h: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#ifndef _BNX2I_H_
+#define _BNX2I_H_
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/in.h>
+#include <linux/kfifo.h>
+#include <linux/netdevice.h>
+#include <linux/completion.h>
+
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+#include "../../net/cnic_if.h"
+#include "57xx_iscsi_hsi.h"
+#include "57xx_iscsi_constants.h"
+
+#define BNX2_ISCSI_DRIVER_NAME "bnx2i"
+
+#define BNX2I_MAX_ADAPTERS 8
+
+#define ISCSI_MAX_CONNS_PER_HBA 128
+#define ISCSI_MAX_SESS_PER_HBA ISCSI_MAX_CONNS_PER_HBA
+#define ISCSI_MAX_CMDS_PER_SESS 128
+
+/* Total active commands across all connections supported by devices */
+#define ISCSI_MAX_CMDS_PER_HBA_5708 (28 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_5709 (128 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+#define ISCSI_MAX_CMDS_PER_HBA_57710 (256 * (ISCSI_MAX_CMDS_PER_SESS - 1))
+
+#define ISCSI_MAX_BDS_PER_CMD 32
+
+#define MAX_PAGES_PER_CTRL_STRUCT_POOL 8
+#define BNX2I_RESERVED_SLOW_PATH_CMD_SLOTS 4
+
+/* 5706/08 hardware has limit on maximum buffer size per BD it can handle */
+#define MAX_BD_LENGTH 65535
+#define BD_SPLIT_SIZE 32768
+
+/* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */
+#define BNX2I_SQ_WQES_MIN 16
+#define BNX2I_570X_SQ_WQES_MAX 128
+#define BNX2I_5770X_SQ_WQES_MAX 512
+#define BNX2I_570X_SQ_WQES_DEFAULT 128
+#define BNX2I_5770X_SQ_WQES_DEFAULT 256
+
+#define BNX2I_570X_CQ_WQES_MAX 128
+#define BNX2I_5770X_CQ_WQES_MAX 512
+
+#define BNX2I_RQ_WQES_MIN 16
+#define BNX2I_RQ_WQES_MAX 32
+#define BNX2I_RQ_WQES_DEFAULT 16
+
+/* CCELLs per conn */
+#define BNX2I_CCELLS_MIN 16
+#define BNX2I_CCELLS_MAX 96
+#define BNX2I_CCELLS_DEFAULT 64
+
+#define ITT_INVALID_SIGNATURE 0xFFFF
+
+#define ISCSI_CMD_CLEANUP_TIMEOUT 100
+
+#define BNX2I_CONN_CTX_BUF_SIZE 16384
+
+#define BNX2I_SQ_WQE_SIZE 64
+#define BNX2I_RQ_WQE_SIZE 256
+#define BNX2I_CQE_SIZE 64
+
+#define MB_KERNEL_CTX_SHIFT 8
+#define MB_KERNEL_CTX_SIZE (1 << MB_KERNEL_CTX_SHIFT)
+
+#define CTX_SHIFT 7
+#define GET_CID_NUM(cid_addr) ((cid_addr) >> CTX_SHIFT)
+
+#define CTX_OFFSET 0x10000
+#define MAX_CID_CNT 0x4000
+
+/* 5709 context registers */
+#define BNX2_MQ_CONFIG2 0x00003d00
+#define BNX2_MQ_CONFIG2_CONT_SZ (0x7L<<4)
+#define BNX2_MQ_CONFIG2_FIRST_L4L5 (0x1fL<<8)
+
+/* 57710's BAR2 is mapped to doorbell registers */
+#define BNX2X_DOORBELL_PCI_BAR 2
+#define BNX2X_MAX_CQS 8
+
+#define CNIC_ARM_CQE 1
+#define CNIC_DISARM_CQE 0
+
+#define REG_RD(__hba, offset) \
+ readl(__hba->regview + offset)
+#define REG_WR(__hba, offset, val) \
+ writel(val, __hba->regview + offset)
+
+
+/**
+ * struct generic_pdu_resc - login pdu resource structure
+ *
+ * @req_buf: driver buffer used to stage payload associated with
+ * the login request
+ * @req_dma_addr: dma address for iscsi login request payload buffer
+ * @req_buf_size: actual login request payload length
+ * @req_wr_ptr: pointer into login request buffer when next data is
+ * to be written
+ * @resp_hdr: iscsi header where iscsi login response header is to
+ * be recreated
+ * @resp_buf: buffer to stage login response payload
+ * @resp_dma_addr: login response payload buffer dma address
+ * @resp_buf_size: login response paylod length
+ * @resp_wr_ptr: pointer into login response buffer when next data is
+ * to be written
+ * @req_bd_tbl: iscsi login request payload BD table
+ * @req_bd_dma: login request BD table dma address
+ * @resp_bd_tbl: iscsi login response payload BD table
+ * @resp_bd_dma: login request BD table dma address
+ *
+ * following structure defines buffer info for generic pdus such as iSCSI Login,
+ * Logout and NOP
+ */
+struct generic_pdu_resc {
+ char *req_buf;
+ dma_addr_t req_dma_addr;
+ u32 req_buf_size;
+ char *req_wr_ptr;
+ struct iscsi_hdr resp_hdr;
+ char *resp_buf;
+ dma_addr_t resp_dma_addr;
+ u32 resp_buf_size;
+ char *resp_wr_ptr;
+ char *req_bd_tbl;
+ dma_addr_t req_bd_dma;
+ char *resp_bd_tbl;
+ dma_addr_t resp_bd_dma;
+};
+
+
+/**
+ * struct bd_resc_page - tracks DMA'able memory allocated for BD tables
+ *
+ * @link: list head to link elements
+ * @max_ptrs: maximun pointers that can be stored in this page
+ * @num_valid: number of pointer valid in this page
+ * @page: base addess for page pointer array
+ *
+ * structure to track DMA'able memory allocated for command BD tables
+ */
+struct bd_resc_page {
+ struct list_head link;
+ u32 max_ptrs;
+ u32 num_valid;
+ void *page[1];
+};
+
+
+/**
+ * struct io_bdt - I/O buffer destricptor table
+ *
+ * @bd_tbl: BD table's virtual address
+ * @bd_tbl_dma: BD table's dma address
+ * @bd_valid: num valid BD entries
+ *
+ * IO BD table
+ */
+struct io_bdt {
+ struct iscsi_bd *bd_tbl;
+ dma_addr_t bd_tbl_dma;
+ u16 bd_valid;
+};
+
+
+/**
+ * bnx2i_cmd - iscsi command structure
+ *
+ * @scsi_cmd: SCSI-ML task pointer corresponding to this iscsi cmd
+ * @sg: SG list
+ * @io_tbl: buffer descriptor (BD) table
+ * @bd_tbl_dma: buffer descriptor (BD) table's dma address
+ */
+struct bnx2i_cmd {
+ struct iscsi_hdr hdr;
+ struct bnx2i_conn *conn;
+ struct scsi_cmnd *scsi_cmd;
+ struct scatterlist *sg;
+ struct io_bdt io_tbl;
+ dma_addr_t bd_tbl_dma;
+ struct bnx2i_cmd_request req;
+};
+
+
+/**
+ * struct bnx2i_conn - iscsi connection structure
+ *
+ * @cls_conn: pointer to iscsi cls conn
+ * @hba: adapter structure pointer
+ * @iscsi_conn_cid: iscsi conn id
+ * @fw_cid: firmware iscsi context id
+ * @ep: endpoint structure pointer
+ * @gen_pdu: login/nopout/logout pdu resources
+ * @violation_notified: bit mask used to track iscsi error/warning messages
+ * already printed out
+ *
+ * iSCSI connection structure
+ */
+struct bnx2i_conn {
+ struct iscsi_cls_conn *cls_conn;
+ struct bnx2i_hba *hba;
+ struct completion cmd_cleanup_cmpl;
+ int is_bound;
+
+ u32 iscsi_conn_cid;
+#define BNX2I_CID_RESERVED 0x5AFF
+ u32 fw_cid;
+
+ struct timer_list poll_timer;
+ /*
+ * Queue Pair (QP) related structure elements.
+ */
+ struct bnx2i_endpoint *ep;
+
+ /*
+ * Buffer for login negotiation process
+ */
+ struct generic_pdu_resc gen_pdu;
+ u64 violation_notified;
+};
+
+
+
+/**
+ * struct iscsi_cid_queue - Per adapter iscsi cid queue
+ *
+ * @cid_que_base: queue base memory
+ * @cid_que: queue memory pointer
+ * @cid_q_prod_idx: produce index
+ * @cid_q_cons_idx: consumer index
+ * @cid_q_max_idx: max index. used to detect wrap around condition
+ * @cid_free_cnt: queue size
+ * @conn_cid_tbl: iscsi cid to conn structure mapping table
+ *
+ * Per adapter iSCSI CID Queue
+ */
+struct iscsi_cid_queue {
+ void *cid_que_base;
+ u32 *cid_que;
+ u32 cid_q_prod_idx;
+ u32 cid_q_cons_idx;
+ u32 cid_q_max_idx;
+ u32 cid_free_cnt;
+ struct bnx2i_conn **conn_cid_tbl;
+};
+
+/**
+ * struct bnx2i_hba - bnx2i adapter structure
+ *
+ * @link: list head to link elements
+ * @cnic: pointer to cnic device
+ * @pcidev: pointer to pci dev
+ * @netdev: pointer to netdev structure
+ * @regview: mapped PCI register space
+ * @age: age, incremented by every recovery
+ * @cnic_dev_type: cnic device type, 5706/5708/5709/57710
+ * @mail_queue_access: mailbox queue access mode, applicable to 5709 only
+ * @reg_with_cnic: indicates whether the device is register with CNIC
+ * @adapter_state: adapter state, UP, GOING_DOWN, LINK_DOWN
+ * @mtu_supported: Ethernet MTU supported
+ * @shost: scsi host pointer
+ * @max_sqes: SQ size
+ * @max_rqes: RQ size
+ * @max_cqes: CQ size
+ * @num_ccell: number of command cells per connection
+ * @ofld_conns_active: active connection list
+ * @max_active_conns: max offload connections supported by this device
+ * @cid_que: iscsi cid queue
+ * @ep_rdwr_lock: read / write lock to synchronize various ep lists
+ * @ep_ofld_list: connection list for pending offload completion
+ * @ep_destroy_list: connection list for pending offload completion
+ * @mp_bd_tbl: BD table to be used with middle path requests
+ * @mp_bd_dma: DMA address of 'mp_bd_tbl' memory buffer
+ * @dummy_buffer: Dummy buffer to be used with zero length scsicmd reqs
+ * @dummy_buf_dma: DMA address of 'dummy_buffer' memory buffer
+ * @lock: lock to synchonize access to hba structure
+ * @pci_did: PCI device ID
+ * @pci_vid: PCI vendor ID
+ * @pci_sdid: PCI subsystem device ID
+ * @pci_svid: PCI subsystem vendor ID
+ * @pci_func: PCI function number in system pci tree
+ * @pci_devno: PCI device number in system pci tree
+ * @num_wqe_sent: statistic counter, total wqe's sent
+ * @num_cqe_rcvd: statistic counter, total cqe's received
+ * @num_intr_claimed: statistic counter, total interrupts claimed
+ * @link_changed_count: statistic counter, num of link change notifications
+ * received
+ * @ipaddr_changed_count: statistic counter, num times IP address changed while
+ * at least one connection is offloaded
+ * @num_sess_opened: statistic counter, total num sessions opened
+ * @num_conn_opened: statistic counter, total num conns opened on this hba
+ * @ctx_ccell_tasks: captures number of ccells and tasks supported by
+ * currently offloaded connection, used to decode
+ * context memory
+ *
+ * Adapter Data Structure
+ */
+struct bnx2i_hba {
+ struct list_head link;
+ struct cnic_dev *cnic;
+ struct pci_dev *pcidev;
+ struct net_device *netdev;
+ void __iomem *regview;
+
+ u32 age;
+ unsigned long cnic_dev_type;
+ #define BNX2I_NX2_DEV_5706 0x0
+ #define BNX2I_NX2_DEV_5708 0x1
+ #define BNX2I_NX2_DEV_5709 0x2
+ #define BNX2I_NX2_DEV_57710 0x3
+ u32 mail_queue_access;
+ #define BNX2I_MQ_KERNEL_MODE 0x0
+ #define BNX2I_MQ_KERNEL_BYPASS_MODE 0x1
+ #define BNX2I_MQ_BIN_MODE 0x2
+ unsigned long reg_with_cnic;
+ #define BNX2I_CNIC_REGISTERED 1
+
+ unsigned long adapter_state;
+ #define ADAPTER_STATE_UP 0
+ #define ADAPTER_STATE_GOING_DOWN 1
+ #define ADAPTER_STATE_LINK_DOWN 2
+ #define ADAPTER_STATE_INIT_FAILED 31
+ unsigned int mtu_supported;
+ #define BNX2I_MAX_MTU_SUPPORTED 1500
+
+ struct Scsi_Host *shost;
+
+ u32 max_sqes;
+ u32 max_rqes;
+ u32 max_cqes;
+ u32 num_ccell;
+
+ int ofld_conns_active;
+
+ int max_active_conns;
+ struct iscsi_cid_queue cid_que;
+
+ rwlock_t ep_rdwr_lock;
+ struct list_head ep_ofld_list;
+ struct list_head ep_destroy_list;
+
+ /*
+ * BD table to be used with MP (Middle Path requests.
+ */
+ char *mp_bd_tbl;
+ dma_addr_t mp_bd_dma;
+ char *dummy_buffer;
+ dma_addr_t dummy_buf_dma;
+
+ spinlock_t lock; /* protects hba structure access */
+ struct mutex net_dev_lock;/* sync net device access */
+
+ /*
+ * PCI related info.
+ */
+ u16 pci_did;
+ u16 pci_vid;
+ u16 pci_sdid;
+ u16 pci_svid;
+ u16 pci_func;
+ u16 pci_devno;
+
+ /*
+ * Following are a bunch of statistics useful during development
+ * and later stage for score boarding.
+ */
+ u32 num_wqe_sent;
+ u32 num_cqe_rcvd;
+ u32 num_intr_claimed;
+ u32 link_changed_count;
+ u32 ipaddr_changed_count;
+ u32 num_sess_opened;
+ u32 num_conn_opened;
+ unsigned int ctx_ccell_tasks;
+};
+
+
+/*******************************************************************************
+ * QP [ SQ / RQ / CQ ] info.
+ ******************************************************************************/
+
+/*
+ * SQ/RQ/CQ generic structure definition
+ */
+struct sqe {
+ u8 sqe_byte[BNX2I_SQ_WQE_SIZE];
+};
+
+struct rqe {
+ u8 rqe_byte[BNX2I_RQ_WQE_SIZE];
+};
+
+struct cqe {
+ u8 cqe_byte[BNX2I_CQE_SIZE];
+};
+
+
+enum {
+#if defined(__LITTLE_ENDIAN)
+ CNIC_EVENT_COAL_INDEX = 0x0,
+ CNIC_SEND_DOORBELL = 0x4,
+ CNIC_EVENT_CQ_ARM = 0x7,
+ CNIC_RECV_DOORBELL = 0x8
+#elif defined(__BIG_ENDIAN)
+ CNIC_EVENT_COAL_INDEX = 0x2,
+ CNIC_SEND_DOORBELL = 0x6,
+ CNIC_EVENT_CQ_ARM = 0x4,
+ CNIC_RECV_DOORBELL = 0xa
+#endif
+};
+
+
+/*
+ * CQ DB
+ */
+struct bnx2x_iscsi_cq_pend_cmpl {
+ /* CQ producer, updated by Ustorm */
+ u16 ustrom_prod;
+ /* CQ pending completion counter */
+ u16 pend_cntr;
+};
+
+
+struct bnx2i_5771x_cq_db {
+ struct bnx2x_iscsi_cq_pend_cmpl qp_pend_cmpl[BNX2X_MAX_CQS];
+ /* CQ pending completion ITT array */
+ u16 itt[BNX2X_MAX_CQS];
+ /* Cstorm CQ sequence to notify array, updated by driver */;
+ u16 sqn[BNX2X_MAX_CQS];
+ u32 reserved[4] /* 16 byte allignment */;
+};
+
+
+struct bnx2i_5771x_sq_rq_db {
+ u16 prod_idx;
+ u8 reserved0[14]; /* Pad structure size to 16 bytes */
+};
+
+
+struct bnx2i_5771x_dbell_hdr {
+ u8 header;
+ /* 1 for rx doorbell, 0 for tx doorbell */
+#define B577XX_DOORBELL_HDR_RX (0x1<<0)
+#define B577XX_DOORBELL_HDR_RX_SHIFT 0
+ /* 0 for normal doorbell, 1 for advertise wnd doorbell */
+#define B577XX_DOORBELL_HDR_DB_TYPE (0x1<<1)
+#define B577XX_DOORBELL_HDR_DB_TYPE_SHIFT 1
+ /* rdma tx only: DPM transaction size specifier (64/128/256/512B) */
+#define B577XX_DOORBELL_HDR_DPM_SIZE (0x3<<2)
+#define B577XX_DOORBELL_HDR_DPM_SIZE_SHIFT 2
+ /* connection type */
+#define B577XX_DOORBELL_HDR_CONN_TYPE (0xF<<4)
+#define B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT 4
+};
+
+struct bnx2i_5771x_dbell {
+ struct bnx2i_5771x_dbell_hdr dbell;
+ u8 pad[3];
+
+};
+
+/**
+ * struct qp_info - QP (share queue region) atrributes structure
+ *
+ * @ctx_base: ioremapped pci register base to access doorbell register
+ * pertaining to this offloaded connection
+ * @sq_virt: virtual address of send queue (SQ) region
+ * @sq_phys: DMA address of SQ memory region
+ * @sq_mem_size: SQ size
+ * @sq_prod_qe: SQ producer entry pointer
+ * @sq_cons_qe: SQ consumer entry pointer
+ * @sq_first_qe: virtaul address of first entry in SQ
+ * @sq_last_qe: virtaul address of last entry in SQ
+ * @sq_prod_idx: SQ producer index
+ * @sq_cons_idx: SQ consumer index
+ * @sqe_left: number sq entry left
+ * @sq_pgtbl_virt: page table describing buffer consituting SQ region
+ * @sq_pgtbl_phys: dma address of 'sq_pgtbl_virt'
+ * @sq_pgtbl_size: SQ page table size
+ * @cq_virt: virtual address of completion queue (CQ) region
+ * @cq_phys: DMA address of RQ memory region
+ * @cq_mem_size: CQ size
+ * @cq_prod_qe: CQ producer entry pointer
+ * @cq_cons_qe: CQ consumer entry pointer
+ * @cq_first_qe: virtaul address of first entry in CQ
+ * @cq_last_qe: virtaul address of last entry in CQ
+ * @cq_prod_idx: CQ producer index
+ * @cq_cons_idx: CQ consumer index
+ * @cqe_left: number cq entry left
+ * @cqe_size: size of each CQ entry
+ * @cqe_exp_seq_sn: next expected CQE sequence number
+ * @cq_pgtbl_virt: page table describing buffer consituting CQ region
+ * @cq_pgtbl_phys: dma address of 'cq_pgtbl_virt'
+ * @cq_pgtbl_size: CQ page table size
+ * @rq_virt: virtual address of receive queue (RQ) region
+ * @rq_phys: DMA address of RQ memory region
+ * @rq_mem_size: RQ size
+ * @rq_prod_qe: RQ producer entry pointer
+ * @rq_cons_qe: RQ consumer entry pointer
+ * @rq_first_qe: virtaul address of first entry in RQ
+ * @rq_last_qe: virtaul address of last entry in RQ
+ * @rq_prod_idx: RQ producer index
+ * @rq_cons_idx: RQ consumer index
+ * @rqe_left: number rq entry left
+ * @rq_pgtbl_virt: page table describing buffer consituting RQ region
+ * @rq_pgtbl_phys: dma address of 'rq_pgtbl_virt'
+ * @rq_pgtbl_size: RQ page table size
+ *
+ * queue pair (QP) is a per connection shared data structure which is used
+ * to send work requests (SQ), receive completion notifications (CQ)
+ * and receive asynchoronous / scsi sense info (RQ). 'qp_info' structure
+ * below holds queue memory, consumer/producer indexes and page table
+ * information
+ */
+struct qp_info {
+ void __iomem *ctx_base;
+#define DPM_TRIGER_TYPE 0x40
+
+#define BNX2I_570x_QUE_DB_SIZE 0
+#define BNX2I_5771x_QUE_DB_SIZE 16
+ struct sqe *sq_virt;
+ dma_addr_t sq_phys;
+ u32 sq_mem_size;
+
+ struct sqe *sq_prod_qe;
+ struct sqe *sq_cons_qe;
+ struct sqe *sq_first_qe;
+ struct sqe *sq_last_qe;
+ u16 sq_prod_idx;
+ u16 sq_cons_idx;
+ u32 sqe_left;
+
+ void *sq_pgtbl_virt;
+ dma_addr_t sq_pgtbl_phys;
+ u32 sq_pgtbl_size; /* set to PAGE_SIZE for 5708 & 5709 */
+
+ struct cqe *cq_virt;
+ dma_addr_t cq_phys;
+ u32 cq_mem_size;
+
+ struct cqe *cq_prod_qe;
+ struct cqe *cq_cons_qe;
+ struct cqe *cq_first_qe;
+ struct cqe *cq_last_qe;
+ u16 cq_prod_idx;
+ u16 cq_cons_idx;
+ u32 cqe_left;
+ u32 cqe_size;
+ u32 cqe_exp_seq_sn;
+
+ void *cq_pgtbl_virt;
+ dma_addr_t cq_pgtbl_phys;
+ u32 cq_pgtbl_size; /* set to PAGE_SIZE for 5708 & 5709 */
+
+ struct rqe *rq_virt;
+ dma_addr_t rq_phys;
+ u32 rq_mem_size;
+
+ struct rqe *rq_prod_qe;
+ struct rqe *rq_cons_qe;
+ struct rqe *rq_first_qe;
+ struct rqe *rq_last_qe;
+ u16 rq_prod_idx;
+ u16 rq_cons_idx;
+ u32 rqe_left;
+
+ void *rq_pgtbl_virt;
+ dma_addr_t rq_pgtbl_phys;
+ u32 rq_pgtbl_size; /* set to PAGE_SIZE for 5708 & 5709 */
+};
+
+
+
+/*
+ * CID handles
+ */
+struct ep_handles {
+ u32 fw_cid;
+ u32 drv_iscsi_cid;
+ u16 pg_cid;
+ u16 rsvd;
+};
+
+
+enum {
+ EP_STATE_IDLE = 0x0,
+ EP_STATE_PG_OFLD_START = 0x1,
+ EP_STATE_PG_OFLD_COMPL = 0x2,
+ EP_STATE_OFLD_START = 0x4,
+ EP_STATE_OFLD_COMPL = 0x8,
+ EP_STATE_CONNECT_START = 0x10,
+ EP_STATE_CONNECT_COMPL = 0x20,
+ EP_STATE_ULP_UPDATE_START = 0x40,
+ EP_STATE_ULP_UPDATE_COMPL = 0x80,
+ EP_STATE_DISCONN_START = 0x100,
+ EP_STATE_DISCONN_COMPL = 0x200,
+ EP_STATE_CLEANUP_START = 0x400,
+ EP_STATE_CLEANUP_CMPL = 0x800,
+ EP_STATE_TCP_FIN_RCVD = 0x1000,
+ EP_STATE_TCP_RST_RCVD = 0x2000,
+ EP_STATE_PG_OFLD_FAILED = 0x1000000,
+ EP_STATE_ULP_UPDATE_FAILED = 0x2000000,
+ EP_STATE_CLEANUP_FAILED = 0x4000000,
+ EP_STATE_OFLD_FAILED = 0x8000000,
+ EP_STATE_CONNECT_FAILED = 0x10000000,
+ EP_STATE_DISCONN_TIMEDOUT = 0x20000000,
+};
+
+/**
+ * struct bnx2i_endpoint - representation of tcp connection in NX2 world
+ *
+ * @link: list head to link elements
+ * @hba: adapter to which this connection belongs
+ * @conn: iscsi connection this EP is linked to
+ * @sess: iscsi session this EP is linked to
+ * @cm_sk: cnic sock struct
+ * @hba_age: age to detect if 'iscsid' issues ep_disconnect()
+ * after HBA reset is completed by bnx2i/cnic/bnx2
+ * modules
+ * @state: tracks offload connection state machine
+ * @teardown_mode: indicates if conn teardown is abortive or orderly
+ * @qp: QP information
+ * @ids: contains chip allocated *context id* & driver assigned
+ * *iscsi cid*
+ * @ofld_timer: offload timer to detect timeout
+ * @ofld_wait: wait queue
+ *
+ * Endpoint Structure - equivalent of tcp socket structure
+ */
+struct bnx2i_endpoint {
+ struct list_head link;
+ struct bnx2i_hba *hba;
+ struct bnx2i_conn *conn;
+ struct cnic_sock *cm_sk;
+ u32 hba_age;
+ u32 state;
+ unsigned long timestamp;
+ int num_active_cmds;
+
+ struct qp_info qp;
+ struct ep_handles ids;
+ #define ep_iscsi_cid ids.drv_iscsi_cid
+ #define ep_cid ids.fw_cid
+ #define ep_pg_cid ids.pg_cid
+ struct timer_list ofld_timer;
+ wait_queue_head_t ofld_wait;
+};
+
+
+
+/* Global variables */
+extern unsigned int error_mask1, error_mask2;
+extern u64 iscsi_error_mask;
+extern unsigned int en_tcp_dack;
+extern unsigned int event_coal_div;
+
+extern struct scsi_transport_template *bnx2i_scsi_xport_template;
+extern struct iscsi_transport bnx2i_iscsi_transport;
+extern struct cnic_ulp_ops bnx2i_cnic_cb;
+
+extern unsigned int sq_size;
+extern unsigned int rq_size;
+
+extern struct device_attribute *bnx2i_dev_attributes[];
+
+
+
+/*
+ * Function Prototypes
+ */
+extern void bnx2i_identify_device(struct bnx2i_hba *hba);
+extern void bnx2i_register_device(struct bnx2i_hba *hba);
+
+extern void bnx2i_ulp_init(struct cnic_dev *dev);
+extern void bnx2i_ulp_exit(struct cnic_dev *dev);
+extern void bnx2i_start(void *handle);
+extern void bnx2i_stop(void *handle);
+extern void bnx2i_reg_dev_all(void);
+extern void bnx2i_unreg_dev_all(void);
+extern struct bnx2i_hba *get_adapter_list_head(void);
+
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+ u16 iscsi_cid);
+
+int bnx2i_alloc_ep_pool(void);
+void bnx2i_release_ep_pool(void);
+struct bnx2i_endpoint *bnx2i_ep_ofld_list_next(struct bnx2i_hba *hba);
+struct bnx2i_endpoint *bnx2i_ep_destroy_list_next(struct bnx2i_hba *hba);
+
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic);
+
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic);
+void bnx2i_free_hba(struct bnx2i_hba *hba);
+
+void bnx2i_get_rq_buf(struct bnx2i_conn *conn, char *ptr, int len);
+void bnx2i_put_rq_buf(struct bnx2i_conn *conn, int count);
+
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd);
+
+void bnx2i_drop_session(struct iscsi_cls_session *session);
+
+extern int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba);
+extern int bnx2i_send_iscsi_login(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_tmf(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *conn,
+ struct bnx2i_cmd *cmnd);
+extern int bnx2i_send_iscsi_nopout(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask, u32 ttt,
+ char *datap, int data_len, int unsol);
+extern int bnx2i_send_iscsi_logout(struct bnx2i_conn *conn,
+ struct iscsi_task *mtask);
+extern void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba,
+ struct bnx2i_cmd *cmd);
+extern void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
+extern void bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+
+extern int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+extern void bnx2i_free_qp_resc(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep);
+extern void bnx2i_ep_ofld_timer(unsigned long data);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_ofld_list(
+ struct bnx2i_hba *hba, u32 iscsi_cid);
+extern struct bnx2i_endpoint *bnx2i_find_ep_in_destroy_list(
+ struct bnx2i_hba *hba, u32 iscsi_cid);
+
+extern int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep);
+extern void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action);
+
+/* Debug related function prototypes */
+extern void bnx2i_print_pend_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_active_cmd_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_xmit_pdu_queue(struct bnx2i_conn *conn);
+extern void bnx2i_print_recv_state(struct bnx2i_conn *conn);
+
+#endif
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
new file mode 100644
index 0000000..906cef5
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -0,0 +1,2405 @@
+/* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+/**
+ * bnx2i_get_cid_num - get cid from ep
+ * @ep: endpoint pointer
+ *
+ * Only applicable to 57710 family of devices
+ */
+static u32 bnx2i_get_cid_num(struct bnx2i_endpoint *ep)
+{
+ u32 cid;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ cid = ep->ep_cid;
+ else
+ cid = GET_CID_NUM(ep->ep_cid);
+ return cid;
+}
+
+
+/**
+ * bnx2i_adjust_qp_size - Adjust SQ/RQ/CQ size for 57710 device type
+ * @hba: Adapter for which adjustments is to be made
+ *
+ * Only applicable to 57710 family of devices
+ */
+static void bnx2i_adjust_qp_size(struct bnx2i_hba *hba)
+{
+ u32 num_elements_per_pg;
+
+ if (test_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type) ||
+ test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type) ||
+ test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+ if (!is_power_of_2(hba->max_sqes))
+ hba->max_sqes = rounddown_pow_of_two(hba->max_sqes);
+
+ if (!is_power_of_2(hba->max_rqes))
+ hba->max_rqes = rounddown_pow_of_two(hba->max_rqes);
+ }
+
+ /* Adjust each queue size if the user selection does not
+ * yield integral num of page buffers
+ */
+ /* adjust SQ */
+ num_elements_per_pg = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+ if (hba->max_sqes < num_elements_per_pg)
+ hba->max_sqes = num_elements_per_pg;
+ else if (hba->max_sqes % num_elements_per_pg)
+ hba->max_sqes = (hba->max_sqes + num_elements_per_pg - 1) &
+ ~(num_elements_per_pg - 1);
+
+ /* adjust CQ */
+ num_elements_per_pg = PAGE_SIZE / BNX2I_CQE_SIZE;
+ if (hba->max_cqes < num_elements_per_pg)
+ hba->max_cqes = num_elements_per_pg;
+ else if (hba->max_cqes % num_elements_per_pg)
+ hba->max_cqes = (hba->max_cqes + num_elements_per_pg - 1) &
+ ~(num_elements_per_pg - 1);
+
+ /* adjust RQ */
+ num_elements_per_pg = PAGE_SIZE / BNX2I_RQ_WQE_SIZE;
+ if (hba->max_rqes < num_elements_per_pg)
+ hba->max_rqes = num_elements_per_pg;
+ else if (hba->max_rqes % num_elements_per_pg)
+ hba->max_rqes = (hba->max_rqes + num_elements_per_pg - 1) &
+ ~(num_elements_per_pg - 1);
+}
+
+
+/**
+ * bnx2i_get_link_state - get network interface link state
+ * @hba: adapter instance pointer
+ *
+ * updates adapter structure flag based on netdev state
+ */
+static void bnx2i_get_link_state(struct bnx2i_hba *hba)
+{
+ if (test_bit(__LINK_STATE_NOCARRIER, &hba->netdev->state))
+ set_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+ else
+ clear_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_iscsi_license_error - displays iscsi license related error message
+ * @hba: adapter instance pointer
+ * @error_code: error classification
+ *
+ * Puts out an error log when driver is unable to offload iscsi connection
+ * due to license restrictions
+ */
+static void bnx2i_iscsi_license_error(struct bnx2i_hba *hba, u32 error_code)
+{
+ if (error_code == ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED)
+ /* iSCSI offload not supported on this device */
+ printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n",
+ hba->netdev->name);
+ if (error_code == ISCSI_KCQE_COMPLETION_STATUS_LOM_ISCSI_NOT_ENABLED)
+ /* iSCSI offload not supported on this LOM device */
+ printk(KERN_ERR "bnx2i: LOM is not enable to "
+ "offload iSCSI connections, dev=%s\n",
+ hba->netdev->name);
+ set_bit(ADAPTER_STATE_INIT_FAILED, &hba->adapter_state);
+}
+
+
+/**
+ * bnx2i_arm_cq_event_coalescing - arms CQ to enable EQ notification
+ * @ep: endpoint (transport indentifier) structure
+ * @action: action, ARM or DISARM. For now only ARM_CQE is used
+ *
+ * Arm'ing CQ will enable chip to generate global EQ events inorder to interrupt
+ * the driver. EQ event is generated CQ index is hit or at least 1 CQ is
+ * outstanding and on chip timer expires
+ */
+void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
+{
+ struct bnx2i_5771x_cq_db *cq_db;
+ u16 cq_index;
+
+ if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ return;
+
+ if (action == CNIC_ARM_CQE) {
+ cq_index = ep->qp.cqe_exp_seq_sn +
+ ep->num_active_cmds / event_coal_div;
+ cq_index %= (ep->qp.cqe_size * 2 + 1);
+ if (!cq_index) {
+ cq_index = 1;
+ cq_db = (struct bnx2i_5771x_cq_db *)
+ ep->qp.cq_pgtbl_virt;
+ cq_db->sqn[0] = cq_index;
+ }
+ }
+}
+
+
+/**
+ * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
+ * @conn: iscsi connection on which RQ event occured
+ * @ptr: driver buffer to which RQ buffer contents is to
+ * be copied
+ * @len: length of valid data inside RQ buf
+ *
+ * Copies RQ buffer contents from shared (DMA'able) memory region to
+ * driver buffer. RQ is used to DMA unsolicitated iscsi pdu's and
+ * scsi sense info
+ */
+void bnx2i_get_rq_buf(struct bnx2i_conn *bnx2i_conn, char *ptr, int len)
+{
+ if (!bnx2i_conn->ep->qp.rqe_left)
+ return;
+
+ bnx2i_conn->ep->qp.rqe_left--;
+ memcpy(ptr, (u8 *) bnx2i_conn->ep->qp.rq_cons_qe, len);
+ if (bnx2i_conn->ep->qp.rq_cons_qe == bnx2i_conn->ep->qp.rq_last_qe) {
+ bnx2i_conn->ep->qp.rq_cons_qe = bnx2i_conn->ep->qp.rq_first_qe;
+ bnx2i_conn->ep->qp.rq_cons_idx = 0;
+ } else {
+ bnx2i_conn->ep->qp.rq_cons_qe++;
+ bnx2i_conn->ep->qp.rq_cons_idx++;
+ }
+}
+
+
+static void bnx2i_ring_577xx_doorbell(struct bnx2i_conn *conn)
+{
+ struct bnx2i_5771x_dbell dbell;
+ u32 msg;
+
+ memset(&dbell, 0, sizeof(dbell));
+ dbell.dbell.header = (B577XX_ISCSI_CONNECTION_TYPE <<
+ B577XX_DOORBELL_HDR_CONN_TYPE_SHIFT);
+ msg = *((u32 *)&dbell);
+ /* TODO : get doorbell register mapping */
+ writel(cpu_to_le32(msg), conn->ep->qp.ctx_base);
+}
+
+
+/**
+ * bnx2i_put_rq_buf - Replenish RQ buffer, if required ring on chip doorbell
+ * @conn: iscsi connection on which event to post
+ * @count: number of RQ buffer being posted to chip
+ *
+ * No need to ring hardware doorbell for 57710 family of devices
+ */
+void bnx2i_put_rq_buf(struct bnx2i_conn *bnx2i_conn, int count)
+{
+ struct bnx2i_5771x_sq_rq_db *rq_db;
+ u16 hi_bit = (bnx2i_conn->ep->qp.rq_prod_idx & 0x8000);
+ struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+ ep->qp.rqe_left += count;
+ ep->qp.rq_prod_idx &= 0x7FFF;
+ ep->qp.rq_prod_idx += count;
+
+ if (ep->qp.rq_prod_idx > bnx2i_conn->hba->max_rqes) {
+ ep->qp.rq_prod_idx %= bnx2i_conn->hba->max_rqes;
+ if (!hi_bit)
+ ep->qp.rq_prod_idx |= 0x8000;
+ } else
+ ep->qp.rq_prod_idx |= hi_bit;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ rq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.rq_pgtbl_virt;
+ rq_db->prod_idx = ep->qp.rq_prod_idx;
+ /* no need to ring hardware doorbell for 57710 */
+ } else {
+ writew(ep->qp.rq_prod_idx,
+ ep->qp.ctx_base + CNIC_RECV_DOORBELL);
+ }
+ mmiowb();
+}
+
+
+/**
+ * bnx2i_ring_sq_dbell - Ring SQ doorbell to wake-up the processing engine
+ * @conn: iscsi connection to which new SQ entries belong
+ * @count: number of SQ WQEs to post
+ *
+ * SQ DB is updated in host memory and TX Doorbell is rung for 57710 family
+ * of devices. For 5706/5708/5709 new SQ WQE count is written into the
+ * doorbell register
+ */
+static void bnx2i_ring_sq_dbell(struct bnx2i_conn *bnx2i_conn, int count)
+{
+ struct bnx2i_5771x_sq_rq_db *sq_db;
+ struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+
+ ep->num_active_cmds++;
+ wmb(); /* flush SQ WQE memory before the doorbell is rung */
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ sq_db = (struct bnx2i_5771x_sq_rq_db *) ep->qp.sq_pgtbl_virt;
+ sq_db->prod_idx = ep->qp.sq_prod_idx;
+ bnx2i_ring_577xx_doorbell(bnx2i_conn);
+ } else
+ writew(count, ep->qp.ctx_base + CNIC_SEND_DOORBELL);
+
+ mmiowb(); /* flush posted PCI writes */
+}
+
+
+/**
+ * bnx2i_ring_dbell_update_sq_params - update SQ driver parameters
+ * @conn: iscsi connection to which new SQ entries belong
+ * @count: number of SQ WQEs to post
+ *
+ * this routine will update SQ driver parameters and ring the doorbell
+ */
+static void bnx2i_ring_dbell_update_sq_params(struct bnx2i_conn *bnx2i_conn,
+ int count)
+{
+ int tmp_cnt;
+
+ if (count == 1) {
+ if (bnx2i_conn->ep->qp.sq_prod_qe ==
+ bnx2i_conn->ep->qp.sq_last_qe)
+ bnx2i_conn->ep->qp.sq_prod_qe =
+ bnx2i_conn->ep->qp.sq_first_qe;
+ else
+ bnx2i_conn->ep->qp.sq_prod_qe++;
+ } else {
+ if ((bnx2i_conn->ep->qp.sq_prod_qe + count) <=
+ bnx2i_conn->ep->qp.sq_last_qe)
+ bnx2i_conn->ep->qp.sq_prod_qe += count;
+ else {
+ tmp_cnt = bnx2i_conn->ep->qp.sq_last_qe -
+ bnx2i_conn->ep->qp.sq_prod_qe;
+ bnx2i_conn->ep->qp.sq_prod_qe =
+ &bnx2i_conn->ep->qp.sq_first_qe[count -
+ (tmp_cnt + 1)];
+ }
+ }
+ bnx2i_conn->ep->qp.sq_prod_idx += count;
+ /* Ring the doorbell */
+ bnx2i_ring_sq_dbell(bnx2i_conn, bnx2i_conn->ep->qp.sq_prod_idx);
+}
+
+
+/**
+ * bnx2i_send_iscsi_login - post iSCSI login request MP WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_login(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *task)
+{
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_login_request *login_wqe;
+ struct iscsi_login *login_hdr;
+ u32 dword;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+ login_hdr = (struct iscsi_login *)task->hdr;
+ login_wqe = (struct bnx2i_login_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+
+ login_wqe->op_code = login_hdr->opcode;
+ login_wqe->op_attr = login_hdr->flags;
+ login_wqe->version_max = login_hdr->max_version;
+ login_wqe->version_min = login_hdr->min_version;
+ login_wqe->data_length = ntoh24(login_hdr->dlength);
+ login_wqe->isid_lo = *((u32 *) login_hdr->isid);
+ login_wqe->isid_hi = *((u16 *) login_hdr->isid + 2);
+ login_wqe->tsih = login_hdr->tsih;
+ login_wqe->itt = task->itt |
+ (ISCSI_TASK_TYPE_MPATH << ISCSI_LOGIN_REQUEST_TYPE_SHIFT);
+ login_wqe->cid = login_hdr->cid;
+
+ login_wqe->cmd_sn = be32_to_cpu(login_hdr->cmdsn);
+ login_wqe->exp_stat_sn = be32_to_cpu(login_hdr->exp_statsn);
+
+ login_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
+ login_wqe->resp_bd_list_addr_hi =
+ (u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
+
+ dword = ((1 << ISCSI_LOGIN_REQUEST_NUM_RESP_BDS_SHIFT) |
+ (bnx2i_conn->gen_pdu.resp_buf_size <<
+ ISCSI_LOGIN_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
+ login_wqe->resp_buffer = dword;
+ login_wqe->flags = 0;
+ login_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
+ login_wqe->bd_list_addr_hi =
+ (u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
+ login_wqe->num_bds = 1;
+ login_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_tmf - post iSCSI task management request MP WQE to hardware
+ * @conn: iscsi connection
+ * @mtask: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Login request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *mtask)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_tm *tmfabort_hdr;
+ struct scsi_cmnd *ref_sc;
+ struct iscsi_task *ctask;
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_tmf_request *tmfabort_wqe;
+ u32 dword;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
+ tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
+ tmfabort_wqe = (struct bnx2i_tmf_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+
+ tmfabort_wqe->op_code = tmfabort_hdr->opcode;
+ tmfabort_wqe->op_attr = 0;
+ tmfabort_wqe->op_attr =
+ ISCSI_TMF_REQUEST_ALWAYS_ONE | ISCSI_TM_FUNC_ABORT_TASK;
+ tmfabort_wqe->lun[0] = be32_to_cpu(tmfabort_hdr->lun[0]);
+ tmfabort_wqe->lun[1] = be32_to_cpu(tmfabort_hdr->lun[1]);
+
+ tmfabort_wqe->itt = (mtask->itt | (ISCSI_TASK_TYPE_MPATH << 14));
+ tmfabort_wqe->reserved2 = 0;
+ tmfabort_wqe->cmd_sn = be32_to_cpu(tmfabort_hdr->cmdsn);
+
+ ctask = iscsi_itt_to_task(conn, tmfabort_hdr->rtt);
+ if (!ctask || ctask->sc)
+ /*
+ * the iscsi layer must have completed the cmd while this
+ * was starting up.
+ */
+ return 0;
+ ref_sc = ctask->sc;
+
+ if (ref_sc->sc_data_direction == DMA_TO_DEVICE)
+ dword = (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ else
+ dword = (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ tmfabort_wqe->ref_itt = (dword | tmfabort_hdr->rtt);
+ tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
+
+ tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+ tmfabort_wqe->bd_list_addr_hi = (u32)
+ ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+ tmfabort_wqe->num_bds = 1;
+ tmfabort_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI SCSI-CMD request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *bnx2i_conn,
+ struct bnx2i_cmd *cmd)
+{
+ struct bnx2i_cmd_request *scsi_cmd_wqe;
+
+ scsi_cmd_wqe = (struct bnx2i_cmd_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+ memcpy(scsi_cmd_wqe, &cmd->req, sizeof(struct bnx2i_cmd_request));
+ scsi_cmd_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+/**
+ * bnx2i_send_iscsi_nopout - post iSCSI NOPOUT request WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ * @ttt: TTT to be used when building pdu header
+ * @datap: payload buffer pointer
+ * @data_len: payload data length
+ * @unsol: indicated whether nopout pdu is unsolicited pdu or
+ * in response to target's NOPIN w/ TTT != FFFFFFFF
+ *
+ * prepare and post a nopout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *task, u32 ttt,
+ char *datap, int data_len, int unsol)
+{
+ struct bnx2i_endpoint *ep = bnx2i_conn->ep;
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_nop_out_request *nopout_wqe;
+ struct iscsi_nopout *nopout_hdr;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+ nopout_hdr = (struct iscsi_nopout *)task->hdr;
+ nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
+ nopout_wqe->op_code = nopout_hdr->opcode;
+ nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL;
+ memcpy(nopout_wqe->lun, nopout_hdr->lun, 8);
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ u32 tmp = nopout_hdr->lun[0];
+ /* 57710 requires LUN field to be swapped */
+ nopout_hdr->lun[0] = nopout_hdr->lun[1];
+ nopout_hdr->lun[1] = tmp;
+ }
+
+ nopout_wqe->itt = ((u16)task->itt |
+ (ISCSI_TASK_TYPE_MPATH <<
+ ISCSI_TMF_REQUEST_TYPE_SHIFT));
+ nopout_wqe->ttt = ttt;
+ nopout_wqe->flags = 0;
+ if (!unsol)
+ nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+ else if (nopout_hdr->itt == RESERVED_ITT)
+ nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
+
+ nopout_wqe->cmd_sn = be32_to_cpu(nopout_hdr->cmdsn);
+ nopout_wqe->data_length = data_len;
+ if (data_len) {
+ /* handle payload data, not required in first release */
+ printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n");
+ } else {
+ nopout_wqe->bd_list_addr_lo = (u32)
+ bnx2i_conn->hba->mp_bd_dma;
+ nopout_wqe->bd_list_addr_hi =
+ (u32) ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+ nopout_wqe->num_bds = 1;
+ }
+ nopout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+
+/**
+ * bnx2i_send_iscsi_logout - post iSCSI logout request WQE to hardware
+ * @conn: iscsi connection
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepare and post logout request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_logout(struct bnx2i_conn *bnx2i_conn,
+ struct iscsi_task *task)
+{
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct bnx2i_logout_request *logout_wqe;
+ struct iscsi_logout *logout_hdr;
+
+ bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
+ logout_hdr = (struct iscsi_logout *)task->hdr;
+
+ logout_wqe = (struct bnx2i_logout_request *)
+ bnx2i_conn->ep->qp.sq_prod_qe;
+ memset(logout_wqe, 0x00, sizeof(struct bnx2i_logout_request));
+
+ logout_wqe->op_code = logout_hdr->opcode;
+ logout_wqe->cmd_sn = be32_to_cpu(logout_hdr->cmdsn);
+ logout_wqe->op_attr =
+ logout_hdr->flags | ISCSI_LOGOUT_REQUEST_ALWAYS_ONE;
+ logout_wqe->itt = ((u16)task->itt |
+ (ISCSI_TASK_TYPE_MPATH <<
+ ISCSI_LOGOUT_REQUEST_TYPE_SHIFT));
+ logout_wqe->data_length = 0;
+ logout_wqe->cid = 0;
+
+ logout_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
+ logout_wqe->bd_list_addr_hi = (u32)
+ ((u64) bnx2i_conn->hba->mp_bd_dma >> 32);
+ logout_wqe->num_bds = 1;
+ logout_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+ return 0;
+}
+
+
+/**
+ * bnx2i_update_iscsi_conn - post iSCSI logout request WQE to hardware
+ * @conn: iscsi connection which requires iscsi parameter update
+ *
+ * sends down iSCSI Conn Update request to move iSCSI conn to FFP
+ */
+void bnx2i_update_iscsi_conn(struct iscsi_conn *conn)
+{
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct bnx2i_hba *hba = bnx2i_conn->hba;
+ struct kwqe *kwqe_arr[2];
+ struct iscsi_kwqe_conn_update *update_wqe;
+ struct iscsi_kwqe_conn_update conn_update_kwqe;
+
+ update_wqe = &conn_update_kwqe;
+
+ update_wqe->hdr.op_code = ISCSI_KWQE_OPCODE_UPDATE_CONN;
+ update_wqe->hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ /* 5771x requires conn context id to be passed as is */
+ if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_conn->ep->hba->cnic_dev_type))
+ update_wqe->context_id = bnx2i_conn->ep->ep_cid;
+ else
+ update_wqe->context_id = (bnx2i_conn->ep->ep_cid >> 7);
+ update_wqe->conn_flags = 0;
+ if (conn->hdrdgst_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_HEADER_DIGEST;
+ if (conn->datadgst_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_DATA_DIGEST;
+ if (conn->session->initial_r2t_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_INITIAL_R2T;
+ if (conn->session->imm_data_en)
+ update_wqe->conn_flags |= ISCSI_KWQE_CONN_UPDATE_IMMEDIATE_DATA;
+
+ update_wqe->max_send_pdu_length = conn->max_xmit_dlength;
+ update_wqe->max_recv_pdu_length = conn->max_recv_dlength;
+ update_wqe->first_burst_length = conn->session->first_burst;
+ update_wqe->max_burst_length = conn->session->max_burst;
+ update_wqe->exp_stat_sn = conn->exp_statsn;
+ update_wqe->max_outstanding_r2ts = conn->session->max_r2t;
+ update_wqe->session_error_recovery_level = conn->session->erl;
+ iscsi_conn_printk(KERN_ALERT, conn,
+ "bnx2i: conn update - MBL 0x%x FBL 0x%x"
+ "MRDSL_I 0x%x MRDSL_T 0x%x \n",
+ update_wqe->max_burst_length,
+ update_wqe->first_burst_length,
+ update_wqe->max_recv_pdu_length,
+ update_wqe->max_send_pdu_length);
+
+ kwqe_arr[0] = (struct kwqe *) update_wqe;
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_ep_ofld_timer - post iSCSI logout request WQE to hardware
+ * @data: endpoint (transport handle) structure pointer
+ *
+ * routine to handle connection offload/destroy request timeout
+ */
+void bnx2i_ep_ofld_timer(unsigned long data)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) data;
+
+ if (ep->state == EP_STATE_OFLD_START) {
+ printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n");
+ ep->state = EP_STATE_OFLD_FAILED;
+ } else if (ep->state == EP_STATE_DISCONN_START) {
+ printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n");
+ ep->state = EP_STATE_DISCONN_TIMEDOUT;
+ } else if (ep->state == EP_STATE_CLEANUP_START) {
+ printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n");
+ ep->state = EP_STATE_CLEANUP_FAILED;
+ }
+
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+static int bnx2i_power_of2(u32 val)
+{
+ u32 power = 0;
+ if (val & (val - 1))
+ return power;
+ val--;
+ while (val) {
+ val = val >> 1;
+ power++;
+ }
+ return power;
+}
+
+
+/**
+ * bnx2i_send_cmd_cleanup_req - send iscsi cmd context clean-up request
+ * @hba: adapter structure pointer
+ * @cmd: driver command structure which is requesting
+ * a WQE to sent to chip for further processing
+ *
+ * prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+ struct bnx2i_cleanup_request *cmd_cleanup;
+
+ cmd_cleanup =
+ (struct bnx2i_cleanup_request *)cmd->conn->ep->qp.sq_prod_qe;
+ memset(cmd_cleanup, 0x00, sizeof(struct bnx2i_cleanup_request));
+
+ cmd_cleanup->op_code = ISCSI_OPCODE_CLEANUP_REQUEST;
+ cmd_cleanup->itt = cmd->req.itt;
+ cmd_cleanup->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+ bnx2i_ring_dbell_update_sq_params(cmd->conn, 1);
+}
+
+
+/**
+ * bnx2i_send_conn_destroy - initiates iscsi connection teardown process
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
+ * iscsi connection context clean-up process
+ */
+void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ struct kwqe *kwqe_arr[2];
+ struct iscsi_kwqe_conn_destroy conn_cleanup;
+
+ memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
+
+ conn_cleanup.hdr.op_code = ISCSI_KWQE_OPCODE_DESTROY_CONN;
+ conn_cleanup.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+ /* 5771x requires conn context id to be passed as is */
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ conn_cleanup.context_id = ep->ep_cid;
+ else
+ conn_cleanup.context_id = (ep->ep_cid >> 7);
+
+ conn_cleanup.reserved0 = (u16)ep->ep_iscsi_cid;
+
+ kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+}
+
+
+/**
+ * bnx2i_570x_send_conn_ofld_req - initiates iscsi conn context setup process
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ struct kwqe *kwqe_arr[2];
+ struct iscsi_kwqe_conn_offload1 ofld_req1;
+ struct iscsi_kwqe_conn_offload2 ofld_req2;
+ dma_addr_t dma_addr;
+ int num_kwqes = 2;
+ u32 *ptbl;
+
+ ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+ ofld_req1.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+ dma_addr = ep->qp.sq_pgtbl_phys;
+ ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ dma_addr = ep->qp.cq_pgtbl_phys;
+ ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+ ofld_req2.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ dma_addr = ep->qp.rq_pgtbl_phys;
+ ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+
+ ofld_req2.sq_first_pte.hi = *ptbl++;
+ ofld_req2.sq_first_pte.lo = *ptbl;
+
+ ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+ ofld_req2.cq_first_pte.hi = *ptbl++;
+ ofld_req2.cq_first_pte.lo = *ptbl;
+
+ kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+ kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+ ofld_req2.num_additional_wqes = 0;
+
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+
+/**
+ * bnx2i_5771x_send_conn_ofld_req - initiates iscsi connection context creation
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ struct kwqe *kwqe_arr[5];
+ struct iscsi_kwqe_conn_offload1 ofld_req1;
+ struct iscsi_kwqe_conn_offload2 ofld_req2;
+ struct iscsi_kwqe_conn_offload3 ofld_req3[1];
+ dma_addr_t dma_addr;
+ int num_kwqes = 2;
+ u32 *ptbl;
+
+ ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
+ ofld_req1.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ ofld_req1.iscsi_conn_id = (u16) ep->ep_iscsi_cid;
+
+ dma_addr = ep->qp.sq_pgtbl_phys + ISCSI_SQ_DB_SIZE;
+ ofld_req1.sq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.sq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ dma_addr = ep->qp.cq_pgtbl_phys + ISCSI_CQ_DB_SIZE;
+ ofld_req1.cq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req1.cq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ofld_req2.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN2;
+ ofld_req2.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ dma_addr = ep->qp.rq_pgtbl_phys + ISCSI_RQ_DB_SIZE;
+ ofld_req2.rq_page_table_addr_lo = (u32) dma_addr;
+ ofld_req2.rq_page_table_addr_hi = (u32) ((u64) dma_addr >> 32);
+
+ ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+ ofld_req2.sq_first_pte.hi = *ptbl++;
+ ofld_req2.sq_first_pte.lo = *ptbl;
+
+ ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+ ofld_req2.cq_first_pte.hi = *ptbl++;
+ ofld_req2.cq_first_pte.lo = *ptbl;
+
+ kwqe_arr[0] = (struct kwqe *) &ofld_req1;
+ kwqe_arr[1] = (struct kwqe *) &ofld_req2;
+
+ ofld_req2.num_additional_wqes = 1;
+ memset(ofld_req3, 0x00, sizeof(ofld_req3[0]));
+ ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+ ofld_req3[0].qp_first_pte[0].hi = *ptbl++;
+ ofld_req3[0].qp_first_pte[0].lo = *ptbl;
+
+ kwqe_arr[2] = (struct kwqe *) ofld_req3;
+ /* need if we decide to go with multiple KCQE's per conn */
+ num_kwqes += 1;
+
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+}
+
+/**
+ * bnx2i_send_conn_ofld_req - initiates iscsi connection context setup process
+ *
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
+ */
+void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ bnx2i_5771x_send_conn_ofld_req(hba, ep);
+ else
+ bnx2i_570x_send_conn_ofld_req(hba, ep);
+}
+
+
+/**
+ * setup_qp_page_tables - iscsi QP page table setup function
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * Sets up page tables for SQ/RQ/CQ, 1G/sec (5706/5708/5709) devices requires
+ * 64-bit address in big endian format. Whereas 10G/sec (57710) requires
+ * PT in little endian format
+ */
+static void setup_qp_page_tables(struct bnx2i_endpoint *ep)
+{
+ int num_pages;
+ u32 *ptbl;
+ dma_addr_t page;
+ int cnic_dev_10g;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type))
+ cnic_dev_10g = 1;
+ else
+ cnic_dev_10g = 0;
+
+ /* SQ page table */
+ memset(ep->qp.sq_pgtbl_virt, 0, ep->qp.sq_pgtbl_size);
+ num_pages = ep->qp.sq_mem_size / PAGE_SIZE;
+ page = ep->qp.sq_phys;
+
+ if (cnic_dev_10g)
+ ptbl = (u32 *)((u8 *)ep->qp.sq_pgtbl_virt + ISCSI_SQ_DB_SIZE);
+ else
+ ptbl = (u32 *) ep->qp.sq_pgtbl_virt;
+ while (num_pages--) {
+ if (cnic_dev_10g) {
+ /* PTE is written in little endian format for 57710 */
+ *ptbl = (u32) page;
+ ptbl++;
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ page += PAGE_SIZE;
+ } else {
+ /* PTE is written in big endian format for
+ * 5706/5708/5709 devices */
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ *ptbl = (u32) page;
+ ptbl++;
+ page += PAGE_SIZE;
+ }
+ }
+
+ /* RQ page table */
+ memset(ep->qp.rq_pgtbl_virt, 0, ep->qp.rq_pgtbl_size);
+ num_pages = ep->qp.rq_mem_size / PAGE_SIZE;
+ page = ep->qp.rq_phys;
+
+ if (cnic_dev_10g)
+ ptbl = (u32 *)((u8 *)ep->qp.rq_pgtbl_virt + ISCSI_RQ_DB_SIZE);
+ else
+ ptbl = (u32 *) ep->qp.rq_pgtbl_virt;
+ while (num_pages--) {
+ if (cnic_dev_10g) {
+ /* PTE is written in little endian format for 57710 */
+ *ptbl = (u32) page;
+ ptbl++;
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ page += PAGE_SIZE;
+ } else {
+ /* PTE is written in big endian format for
+ * 5706/5708/5709 devices */
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ *ptbl = (u32) page;
+ ptbl++;
+ page += PAGE_SIZE;
+ }
+ }
+
+ /* CQ page table */
+ memset(ep->qp.cq_pgtbl_virt, 0, ep->qp.cq_pgtbl_size);
+ num_pages = ep->qp.cq_mem_size / PAGE_SIZE;
+ page = ep->qp.cq_phys;
+
+ if (cnic_dev_10g)
+ ptbl = (u32 *)((u8 *)ep->qp.cq_pgtbl_virt + ISCSI_CQ_DB_SIZE);
+ else
+ ptbl = (u32 *) ep->qp.cq_pgtbl_virt;
+ while (num_pages--) {
+ if (cnic_dev_10g) {
+ /* PTE is written in little endian format for 57710 */
+ *ptbl = (u32) page;
+ ptbl++;
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ page += PAGE_SIZE;
+ } else {
+ /* PTE is written in big endian format for
+ * 5706/5708/5709 devices */
+ *ptbl = (u32) ((u64) page >> 32);
+ ptbl++;
+ *ptbl = (u32) page;
+ ptbl++;
+ page += PAGE_SIZE;
+ }
+ }
+}
+
+
+/**
+ * bnx2i_alloc_qp_resc - allocates required resources for QP.
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * Allocate QP (transport layer for iSCSI connection) resources, DMA'able
+ * memory for SQ/RQ/CQ and page tables. EP structure elements such
+ * as producer/consumer indexes/pointers, queue sizes and page table
+ * contents are setup
+ */
+int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ struct bnx2i_5771x_cq_db *cq_db;
+
+ ep->hba = hba;
+ ep->conn = NULL;
+ ep->ep_cid = ep->ep_iscsi_cid = ep->ep_pg_cid = 0;
+
+ /* Allocate page table memory for SQ which is page aligned */
+ ep->qp.sq_mem_size = hba->max_sqes * BNX2I_SQ_WQE_SIZE;
+ ep->qp.sq_mem_size =
+ (ep->qp.sq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ ep->qp.sq_pgtbl_size =
+ (ep->qp.sq_mem_size / PAGE_SIZE) * sizeof(void *);
+ ep->qp.sq_pgtbl_size =
+ (ep->qp.sq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ ep->qp.sq_pgtbl_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+ &ep->qp.sq_pgtbl_phys, GFP_KERNEL);
+ if (!ep->qp.sq_pgtbl_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n",
+ ep->qp.sq_pgtbl_size);
+ goto mem_alloc_err;
+ }
+
+ /* Allocate memory area for actual SQ element */
+ ep->qp.sq_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+ &ep->qp.sq_phys, GFP_KERNEL);
+ if (!ep->qp.sq_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n",
+ ep->qp.sq_mem_size);
+ goto mem_alloc_err;
+ }
+
+ memset(ep->qp.sq_virt, 0x00, ep->qp.sq_mem_size);
+ ep->qp.sq_first_qe = ep->qp.sq_virt;
+ ep->qp.sq_prod_qe = ep->qp.sq_first_qe;
+ ep->qp.sq_cons_qe = ep->qp.sq_first_qe;
+ ep->qp.sq_last_qe = &ep->qp.sq_first_qe[hba->max_sqes - 1];
+ ep->qp.sq_prod_idx = 0;
+ ep->qp.sq_cons_idx = 0;
+ ep->qp.sqe_left = hba->max_sqes;
+
+ /* Allocate page table memory for CQ which is page aligned */
+ ep->qp.cq_mem_size = hba->max_cqes * BNX2I_CQE_SIZE;
+ ep->qp.cq_mem_size =
+ (ep->qp.cq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ ep->qp.cq_pgtbl_size =
+ (ep->qp.cq_mem_size / PAGE_SIZE) * sizeof(void *);
+ ep->qp.cq_pgtbl_size =
+ (ep->qp.cq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ ep->qp.cq_pgtbl_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+ &ep->qp.cq_pgtbl_phys, GFP_KERNEL);
+ if (!ep->qp.cq_pgtbl_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n",
+ ep->qp.cq_pgtbl_size);
+ goto mem_alloc_err;
+ }
+
+ /* Allocate memory area for actual CQ element */
+ ep->qp.cq_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+ &ep->qp.cq_phys, GFP_KERNEL);
+ if (!ep->qp.cq_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n",
+ ep->qp.cq_mem_size);
+ goto mem_alloc_err;
+ }
+ memset(ep->qp.cq_virt, 0x00, ep->qp.cq_mem_size);
+
+ ep->qp.cq_first_qe = ep->qp.cq_virt;
+ ep->qp.cq_prod_qe = ep->qp.cq_first_qe;
+ ep->qp.cq_cons_qe = ep->qp.cq_first_qe;
+ ep->qp.cq_last_qe = &ep->qp.cq_first_qe[hba->max_cqes - 1];
+ ep->qp.cq_prod_idx = 0;
+ ep->qp.cq_cons_idx = 0;
+ ep->qp.cqe_left = hba->max_cqes;
+ ep->qp.cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+ ep->qp.cqe_size = hba->max_cqes;
+
+ /* Invalidate all EQ CQE index, req only for 57710 */
+ cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt;
+ memset(cq_db->sqn, 0xFF, sizeof(cq_db->sqn[0]) * BNX2X_MAX_CQS);
+
+ /* Allocate page table memory for RQ which is page aligned */
+ ep->qp.rq_mem_size = hba->max_rqes * BNX2I_RQ_WQE_SIZE;
+ ep->qp.rq_mem_size =
+ (ep->qp.rq_mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ ep->qp.rq_pgtbl_size =
+ (ep->qp.rq_mem_size / PAGE_SIZE) * sizeof(void *);
+ ep->qp.rq_pgtbl_size =
+ (ep->qp.rq_pgtbl_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ ep->qp.rq_pgtbl_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+ &ep->qp.rq_pgtbl_phys, GFP_KERNEL);
+ if (!ep->qp.rq_pgtbl_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n",
+ ep->qp.rq_pgtbl_size);
+ goto mem_alloc_err;
+ }
+
+ /* Allocate memory area for actual RQ element */
+ ep->qp.rq_virt =
+ dma_alloc_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+ &ep->qp.rq_phys, GFP_KERNEL);
+ if (!ep->qp.rq_virt) {
+ printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n",
+ ep->qp.rq_mem_size);
+ goto mem_alloc_err;
+ }
+
+ ep->qp.rq_first_qe = ep->qp.rq_virt;
+ ep->qp.rq_prod_qe = ep->qp.rq_first_qe;
+ ep->qp.rq_cons_qe = ep->qp.rq_first_qe;
+ ep->qp.rq_last_qe = &ep->qp.rq_first_qe[hba->max_rqes - 1];
+ ep->qp.rq_prod_idx = 0x8000;
+ ep->qp.rq_cons_idx = 0;
+ ep->qp.rqe_left = hba->max_rqes;
+
+ setup_qp_page_tables(ep);
+
+ return 0;
+
+mem_alloc_err:
+ bnx2i_free_qp_resc(hba, ep);
+ return -ENOMEM;
+}
+
+
+
+/**
+ * bnx2i_free_qp_resc - free memory resources held by QP
+ * @hba: adapter structure pointer
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * Free QP resources - SQ/RQ/CQ memory and page tables.
+ */
+void bnx2i_free_qp_resc(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+{
+ if (ep->qp.ctx_base) {
+ iounmap(ep->qp.ctx_base);
+ ep->qp.ctx_base = NULL;
+ }
+ /* Free SQ mem */
+ if (ep->qp.sq_pgtbl_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_pgtbl_size,
+ ep->qp.sq_pgtbl_virt, ep->qp.sq_pgtbl_phys);
+ ep->qp.sq_pgtbl_virt = NULL;
+ ep->qp.sq_pgtbl_phys = 0;
+ }
+ if (ep->qp.sq_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.sq_mem_size,
+ ep->qp.sq_virt, ep->qp.sq_phys);
+ ep->qp.sq_virt = NULL;
+ ep->qp.sq_phys = 0;
+ }
+
+ /* Free RQ mem */
+ if (ep->qp.rq_pgtbl_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_pgtbl_size,
+ ep->qp.rq_pgtbl_virt, ep->qp.rq_pgtbl_phys);
+ ep->qp.rq_pgtbl_virt = NULL;
+ ep->qp.rq_pgtbl_phys = 0;
+ }
+ if (ep->qp.rq_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.rq_mem_size,
+ ep->qp.rq_virt, ep->qp.rq_phys);
+ ep->qp.rq_virt = NULL;
+ ep->qp.rq_phys = 0;
+ }
+
+ /* Free CQ mem */
+ if (ep->qp.cq_pgtbl_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_pgtbl_size,
+ ep->qp.cq_pgtbl_virt, ep->qp.cq_pgtbl_phys);
+ ep->qp.cq_pgtbl_virt = NULL;
+ ep->qp.cq_pgtbl_phys = 0;
+ }
+ if (ep->qp.cq_virt) {
+ dma_free_coherent(&hba->pcidev->dev, ep->qp.cq_mem_size,
+ ep->qp.cq_virt, ep->qp.cq_phys);
+ ep->qp.cq_virt = NULL;
+ ep->qp.cq_phys = 0;
+ }
+}
+
+
+/**
+ * bnx2i_send_fw_iscsi_init_msg - initiates initial handshake with iscsi f/w
+ * @hba: adapter structure pointer
+ *
+ * Send down iscsi_init KWQEs which initiates the initial handshake with the f/w
+ * This results in iSCSi support validation and on-chip context manager
+ * initialization. Firmware completes this handshake with a CQE carrying
+ * the result of iscsi support validation. Parameter carried by
+ * iscsi init request determines the number of offloaded connection and
+ * tolerance level for iscsi protocol violation this hba/chip can support
+ */
+int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba)
+{
+ struct kwqe *kwqe_arr[3];
+ struct iscsi_kwqe_init1 iscsi_init;
+ struct iscsi_kwqe_init2 iscsi_init2;
+ int rc = 0;
+ u64 mask64;
+
+ bnx2i_adjust_qp_size(hba);
+
+ iscsi_init.flags =
+ ISCSI_PAGE_SIZE_4K << ISCSI_KWQE_INIT1_PAGE_SIZE_SHIFT;
+ if (en_tcp_dack)
+ iscsi_init.flags |= ISCSI_KWQE_INIT1_DELAYED_ACK_ENABLE;
+ iscsi_init.reserved0 = 0;
+ iscsi_init.num_cqs = 1;
+ iscsi_init.hdr.op_code = ISCSI_KWQE_OPCODE_INIT1;
+ iscsi_init.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+
+ iscsi_init.dummy_buffer_addr_lo = (u32) hba->dummy_buf_dma;
+ iscsi_init.dummy_buffer_addr_hi =
+ (u32) ((u64) hba->dummy_buf_dma >> 32);
+
+ hba->ctx_ccell_tasks =
+ ((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16));
+ iscsi_init.num_ccells_per_conn = hba->num_ccell;
+ iscsi_init.num_tasks_per_conn = hba->max_sqes;
+ iscsi_init.sq_wqes_per_page = PAGE_SIZE / BNX2I_SQ_WQE_SIZE;
+ iscsi_init.sq_num_wqes = hba->max_sqes;
+ iscsi_init.cq_log_wqes_per_page =
+ (u8) bnx2i_power_of2(PAGE_SIZE / BNX2I_CQE_SIZE);
+ iscsi_init.cq_num_wqes = hba->max_cqes;
+ iscsi_init.cq_num_pages = (hba->max_cqes * BNX2I_CQE_SIZE +
+ (PAGE_SIZE - 1)) / PAGE_SIZE;
+ iscsi_init.sq_num_pages = (hba->max_sqes * BNX2I_SQ_WQE_SIZE +
+ (PAGE_SIZE - 1)) / PAGE_SIZE;
+ iscsi_init.rq_buffer_size = BNX2I_RQ_WQE_SIZE;
+ iscsi_init.rq_num_wqes = hba->max_rqes;
+
+
+ iscsi_init2.hdr.op_code = ISCSI_KWQE_OPCODE_INIT2;
+ iscsi_init2.hdr.flags =
+ (ISCSI_KWQE_LAYER_CODE << ISCSI_KWQE_HEADER_LAYER_CODE_SHIFT);
+ iscsi_init2.max_cq_sqn = hba->max_cqes * 2 + 1;
+ mask64 = 0x0ULL;
+ mask64 |= (
+ /* CISCO MDS */
+ (1UL <<
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV) |
+ /* HP MSA1510i */
+ (1UL <<
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN) |
+ /* EMC */
+ (1ULL << ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN));
+ if (error_mask1)
+ iscsi_init2.error_bit_map[0] = error_mask1;
+ else
+ iscsi_init2.error_bit_map[0] = (u32) mask64;
+
+ if (error_mask2)
+ iscsi_init2.error_bit_map[1] = error_mask2;
+ else
+ iscsi_init2.error_bit_map[1] = (u32) (mask64 >> 32);
+
+ iscsi_error_mask = mask64;
+
+ kwqe_arr[0] = (struct kwqe *) &iscsi_init;
+ kwqe_arr[1] = (struct kwqe *) &iscsi_init2;
+
+ if (hba->cnic && hba->cnic->submit_kwqes)
+ rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 2);
+ return rc;
+}
+
+
+/**
+ * bnx2i_process_scsi_cmd_resp - this function handles scsi cmd completion.
+ * @conn: iscsi connection
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process SCSI CMD Response CQE & complete the request to SCSI-ML
+ */
+static int bnx2i_process_scsi_cmd_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct bnx2i_cmd_response *resp_cqe;
+ struct bnx2i_cmd *bnx2i_cmd;
+ struct iscsi_task *task;
+ struct iscsi_cmd_rsp *hdr;
+ u32 datalen = 0;
+
+ resp_cqe = (struct bnx2i_cmd_response *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ resp_cqe->itt & ISCSI_CMD_RESPONSE_INDEX);
+ if (!task)
+ goto fail;
+
+ bnx2i_cmd = task->dd_data;
+
+ if (bnx2i_cmd->req.op_attr & ISCSI_CMD_REQUEST_READ) {
+ conn->datain_pdus_cnt +=
+ resp_cqe->task_stat.read_stat.num_data_outs;
+ conn->rxdata_octets +=
+ bnx2i_cmd->req.total_data_transfer_length;
+ } else {
+ conn->dataout_pdus_cnt +=
+ resp_cqe->task_stat.read_stat.num_data_outs;
+ conn->r2t_pdus_cnt +=
+ resp_cqe->task_stat.read_stat.num_r2ts;
+ conn->txdata_octets +=
+ bnx2i_cmd->req.total_data_transfer_length;
+ }
+ bnx2i_iscsi_unmap_sg_list(bnx2i_cmd);
+
+ hdr = (struct iscsi_cmd_rsp *)task->hdr;
+ resp_cqe = (struct bnx2i_cmd_response *)cqe;
+ hdr->opcode = resp_cqe->op_code;
+ hdr->max_cmdsn = cpu_to_be32(resp_cqe->max_cmd_sn);
+ hdr->exp_cmdsn = cpu_to_be32(resp_cqe->exp_cmd_sn);
+ hdr->response = resp_cqe->response;
+ hdr->cmd_status = resp_cqe->status;
+ hdr->flags = resp_cqe->response_flags;
+ hdr->residual_count = cpu_to_be32(resp_cqe->residual_count);
+
+ if (resp_cqe->op_code == ISCSI_OP_SCSI_DATA_IN)
+ goto done;
+
+ if (resp_cqe->status == SAM_STAT_CHECK_CONDITION) {
+ datalen = resp_cqe->data_length;
+ if (datalen < 2)
+ goto done;
+
+ if (datalen > BNX2I_RQ_WQE_SIZE) {
+ iscsi_conn_printk(KERN_ERR, conn,
+ "sense data len %d > RQ sz\n",
+ datalen);
+ datalen = BNX2I_RQ_WQE_SIZE;
+ } else if (datalen > ISCSI_DEF_MAX_RECV_SEG_LEN) {
+ iscsi_conn_printk(KERN_ERR, conn,
+ "sense data len %d > conn data\n",
+ datalen);
+ datalen = ISCSI_DEF_MAX_RECV_SEG_LEN;
+ }
+
+ bnx2i_get_rq_buf(bnx2i_cmd->conn, conn->data, datalen);
+ bnx2i_put_rq_buf(bnx2i_cmd->conn, 1);
+ }
+
+done:
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr,
+ conn->data, datalen);
+fail:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+
+/**
+ * bnx2i_process_login_resp - this function handles iscsi login response
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process Login Response CQE & complete it to open-iscsi user daemon
+ */
+static int bnx2i_process_login_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_login_response *login;
+ struct iscsi_login_rsp *resp_hdr;
+ int pld_len;
+ int pad_len;
+
+ login = (struct bnx2i_login_response *) cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ login->itt & ISCSI_LOGIN_RESPONSE_INDEX);
+ if (!task)
+ goto done;
+
+ resp_hdr = (struct iscsi_login_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = login->op_code;
+ resp_hdr->flags = login->response_flags;
+ resp_hdr->max_version = login->version_max;
+ resp_hdr->active_version = login->version_active;;
+ resp_hdr->hlength = 0;
+
+ hton24(resp_hdr->dlength, login->data_length);
+ memcpy(resp_hdr->isid, &login->isid_lo, 6);
+ resp_hdr->tsih = cpu_to_be16(login->tsih);
+ resp_hdr->itt = task->hdr->itt;
+ resp_hdr->statsn = cpu_to_be32(login->stat_sn);
+ resp_hdr->exp_cmdsn = cpu_to_be32(login->exp_cmd_sn);
+ resp_hdr->max_cmdsn = cpu_to_be32(login->max_cmd_sn);
+ resp_hdr->status_class = login->status_class;
+ resp_hdr->status_detail = login->status_detail;
+ pld_len = login->data_length;
+ bnx2i_conn->gen_pdu.resp_wr_ptr =
+ bnx2i_conn->gen_pdu.resp_buf + pld_len;
+
+ pad_len = 0;
+ if (pld_len & 0x3)
+ pad_len = 4 - (pld_len % 4);
+
+ if (pad_len) {
+ int i = 0;
+ for (i = 0; i < pad_len; i++) {
+ bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
+ bnx2i_conn->gen_pdu.resp_wr_ptr++;
+ }
+ }
+
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
+ bnx2i_conn->gen_pdu.resp_buf,
+ bnx2i_conn->gen_pdu.resp_wr_ptr - bnx2i_conn->gen_pdu.resp_buf);
+done:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+/**
+ * bnx2i_process_tmf_resp - this function handles iscsi TMF response
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI TMF Response CQE and wake up the driver eh thread.
+ */
+static int bnx2i_process_tmf_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_tmf_response *tmf_cqe;
+ struct iscsi_tm_rsp *resp_hdr;
+
+ tmf_cqe = (struct bnx2i_tmf_response *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ tmf_cqe->itt & ISCSI_TMF_RESPONSE_INDEX);
+ if (!task)
+ goto done;
+
+ resp_hdr = (struct iscsi_tm_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = tmf_cqe->op_code;
+ resp_hdr->max_cmdsn = cpu_to_be32(tmf_cqe->max_cmd_sn);
+ resp_hdr->exp_cmdsn = cpu_to_be32(tmf_cqe->exp_cmd_sn);
+ resp_hdr->itt = task->hdr->itt;
+ resp_hdr->response = tmf_cqe->response;
+
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+/**
+ * bnx2i_process_logout_resp - this function handles iscsi logout response
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI Logout Response CQE & make function call to
+ * notify the user daemon.
+ */
+static int bnx2i_process_logout_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_logout_response *logout;
+ struct iscsi_logout_rsp *resp_hdr;
+
+ logout = (struct bnx2i_logout_response *) cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ logout->itt & ISCSI_LOGOUT_RESPONSE_INDEX);
+ if (!task)
+ goto done;
+
+ resp_hdr = (struct iscsi_logout_rsp *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = logout->op_code;
+ resp_hdr->flags = logout->response;
+ resp_hdr->hlength = 0;
+
+ resp_hdr->itt = task->hdr->itt;
+ resp_hdr->statsn = task->hdr->exp_statsn;
+ resp_hdr->exp_cmdsn = cpu_to_be32(logout->exp_cmd_sn);
+ resp_hdr->max_cmdsn = cpu_to_be32(logout->max_cmd_sn);
+
+ resp_hdr->t2wait = cpu_to_be32(logout->time_to_wait);
+ resp_hdr->t2retain = cpu_to_be32(logout->time_to_retain);
+
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr, NULL, 0);
+done:
+ spin_unlock(&session->lock);
+ return 0;
+}
+
+/**
+ * bnx2i_process_nopin_local_cmpl - this function handles iscsi nopin CQE
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI NOPIN local completion CQE, frees IIT and command structures
+ */
+static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct bnx2i_nop_in_msg *nop_in;
+ struct iscsi_task *task;
+
+ nop_in = (struct bnx2i_nop_in_msg *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
+ if (task)
+ iscsi_put_task(task);
+ spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_unsol_pdu_adjust_rq - makes adjustments to RQ after unsol pdu is recvd
+ * @conn: iscsi connection
+ *
+ * Firmware advances RQ producer index for every unsolicited PDU even if
+ * payload data length is '0'. This function makes corresponding
+ * adjustments on the driver side to match this f/w behavior
+ */
+static void bnx2i_unsol_pdu_adjust_rq(struct bnx2i_conn *bnx2i_conn)
+{
+ char dummy_rq_data[2];
+ bnx2i_get_rq_buf(bnx2i_conn, dummy_rq_data, 1);
+ bnx2i_put_rq_buf(bnx2i_conn, 1);
+}
+
+
+/**
+ * bnx2i_process_nopin_mesg - this function handles iscsi nopin CQE
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI target's proactive iSCSI NOPIN request
+ */
+static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+ struct bnx2i_nop_in_msg *nop_in;
+ struct iscsi_nopin *hdr;
+ u32 itt;
+ int tgt_async_nop = 0;
+
+ nop_in = (struct bnx2i_nop_in_msg *)cqe;
+ itt = nop_in->itt & ISCSI_NOP_IN_MSG_INDEX;
+
+ spin_lock(&session->lock);
+ hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
+ memset(hdr, 0, sizeof(struct iscsi_hdr));
+ hdr->opcode = nop_in->op_code;
+ hdr->max_cmdsn = cpu_to_be32(nop_in->max_cmd_sn);
+ hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
+ hdr->ttt = cpu_to_be32(nop_in->ttt);
+
+ if (itt == (u16) RESERVED_ITT) {
+ bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+ hdr->itt = RESERVED_ITT;
+ tgt_async_nop = 1;
+ goto done;
+ }
+
+ /* this is a response to one of our nop-outs */
+ task = iscsi_itt_to_task(conn, itt);
+ if (task) {
+ hdr->flags = ISCSI_FLAG_CMD_FINAL;
+ hdr->itt = task->hdr->itt;
+ hdr->ttt = cpu_to_be32(nop_in->ttt);
+ memcpy(hdr->lun, nop_in->lun, 8);
+ }
+done:
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+ spin_unlock(&session->lock);
+
+ return tgt_async_nop;
+}
+
+
+/**
+ * bnx2i_process_async_mesg - this function handles iscsi async message
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI ASYNC Message
+ */
+static void bnx2i_process_async_mesg(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct bnx2i_async_msg *async_cqe;
+ struct iscsi_async *resp_hdr;
+ u8 async_event;
+
+ bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+ async_cqe = (struct bnx2i_async_msg *)cqe;
+ async_event = async_cqe->async_event;
+
+ if (async_event == ISCSI_ASYNC_MSG_SCSI_EVENT) {
+ iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+ "async: scsi events not supported\n");
+ return;
+ }
+
+ spin_lock(&session->lock);
+ resp_hdr = (struct iscsi_async *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+ resp_hdr->opcode = async_cqe->op_code;
+ resp_hdr->flags = 0x80;
+
+ memcpy(resp_hdr->lun, async_cqe->lun, 8);
+ resp_hdr->exp_cmdsn = cpu_to_be32(async_cqe->exp_cmd_sn);
+ resp_hdr->max_cmdsn = cpu_to_be32(async_cqe->max_cmd_sn);
+
+ resp_hdr->async_event = async_cqe->async_event;
+ resp_hdr->async_vcode = async_cqe->async_vcode;
+
+ resp_hdr->param1 = cpu_to_be16(async_cqe->param1);
+ resp_hdr->param2 = cpu_to_be16(async_cqe->param2);
+ resp_hdr->param3 = cpu_to_be16(async_cqe->param3);
+
+ __iscsi_complete_pdu(bnx2i_conn->cls_conn->dd_data,
+ (struct iscsi_hdr *)resp_hdr, NULL, 0);
+ spin_unlock(&session->lock);
+}
+
+
+/**
+ * bnx2i_process_reject_mesg - process iscsi reject pdu
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI REJECT message
+ */
+static void bnx2i_process_reject_mesg(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct bnx2i_reject_msg *reject;
+ struct iscsi_reject *hdr;
+
+ reject = (struct bnx2i_reject_msg *) cqe;
+ if (reject->data_length) {
+ bnx2i_get_rq_buf(bnx2i_conn, conn->data, reject->data_length);
+ bnx2i_put_rq_buf(bnx2i_conn, 1);
+ } else
+ bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+
+ spin_lock(&session->lock);
+ hdr = (struct iscsi_reject *) &bnx2i_conn->gen_pdu.resp_hdr;
+ memset(hdr, 0, sizeof(struct iscsi_hdr));
+ hdr->opcode = reject->op_code;
+ hdr->reason = reject->reason;
+ hton24(hdr->dlength, reject->data_length);
+ hdr->max_cmdsn = cpu_to_be32(reject->max_cmd_sn);
+ hdr->exp_cmdsn = cpu_to_be32(reject->exp_cmd_sn);
+ hdr->ffffffff = cpu_to_be32(RESERVED_ITT);
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, conn->data,
+ reject->data_length);
+ spin_unlock(&session->lock);
+}
+
+/**
+ * bnx2i_process_cmd_cleanup_resp - process scsi command clean-up completion
+ * @session: iscsi session pointer
+ * @bnx2i_conn: iscsi connection pointer
+ * @cqe: pointer to newly DMA'ed CQE entry for processing
+ *
+ * process command cleanup response CQE during conn shutdown or error recovery
+ */
+static void bnx2i_process_cmd_cleanup_resp(struct iscsi_session *session,
+ struct bnx2i_conn *bnx2i_conn,
+ struct cqe *cqe)
+{
+ struct bnx2i_cleanup_response *cmd_clean_rsp;
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_task *task;
+
+ cmd_clean_rsp = (struct bnx2i_cleanup_response *)cqe;
+ spin_lock(&session->lock);
+ task = iscsi_itt_to_task(conn,
+ cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+ if (!task)
+ printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n",
+ cmd_clean_rsp->itt & ISCSI_CLEANUP_RESPONSE_INDEX);
+ spin_unlock(&session->lock);
+ complete(&bnx2i_conn->cmd_cleanup_cmpl);
+}
+
+
+
+/**
+ * bnx2i_process_new_cqes - process newly DMA'ed CQE's
+ * @bnx2i_conn: iscsi connection
+ *
+ * this function is called by generic KCQ handler to process all pending CQE's
+ */
+static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
+{
+ struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+ struct iscsi_session *session = conn->session;
+ struct qp_info *qp = &bnx2i_conn->ep->qp;
+ struct bnx2i_nop_in_msg *nopin;
+ int tgt_async_msg;
+
+ while (1) {
+ nopin = (struct bnx2i_nop_in_msg *) qp->cq_cons_qe;
+ if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
+ break;
+
+ if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx)))
+ break;
+
+ tgt_async_msg = 0;
+
+ switch (nopin->op_code) {
+ case ISCSI_OP_SCSI_CMD_RSP:
+ case ISCSI_OP_SCSI_DATA_IN:
+ bnx2i_process_scsi_cmd_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_LOGIN_RSP:
+ bnx2i_process_login_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_SCSI_TMFUNC_RSP:
+ bnx2i_process_tmf_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_LOGOUT_RSP:
+ bnx2i_process_logout_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_NOOP_IN:
+ if (bnx2i_process_nopin_mesg(session, bnx2i_conn,
+ qp->cq_cons_qe))
+ tgt_async_msg = 1;
+ break;
+ case ISCSI_OPCODE_NOPOUT_LOCAL_COMPLETION:
+ bnx2i_process_nopin_local_cmpl(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OP_ASYNC_EVENT:
+ bnx2i_process_async_mesg(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ tgt_async_msg = 1;
+ break;
+ case ISCSI_OP_REJECT:
+ bnx2i_process_reject_mesg(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ case ISCSI_OPCODE_CLEANUP_RESPONSE:
+ bnx2i_process_cmd_cleanup_resp(session, bnx2i_conn,
+ qp->cq_cons_qe);
+ break;
+ default:
+ printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+ nopin->op_code);
+ }
+
+ if (!tgt_async_msg)
+ bnx2i_conn->ep->num_active_cmds--;
+
+ /* clear out in production version only, till beta keep opcode
+ * field intact, will be helpful in debugging (context dump)
+ * nopin->op_code = 0;
+ */
+ qp->cqe_exp_seq_sn++;
+ if (qp->cqe_exp_seq_sn == (qp->cqe_size * 2 + 1))
+ qp->cqe_exp_seq_sn = ISCSI_INITIAL_SN;
+
+ if (qp->cq_cons_qe == qp->cq_last_qe) {
+ qp->cq_cons_qe = qp->cq_first_qe;
+ qp->cq_cons_idx = 0;
+ } else {
+ qp->cq_cons_qe++;
+ qp->cq_cons_idx++;
+ }
+ }
+ bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+}
+
+/**
+ * bnx2i_fastpath_notification - process global event queue (KCQ)
+ * @hba: adapter structure pointer
+ * @new_cqe_kcqe: pointer to newly DMA'ed KCQE entry
+ *
+ * Fast path event notification handler, KCQ entry carries context id
+ * of the connection that has 1 or more pending CQ entries
+ */
+static void bnx2i_fastpath_notification(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *new_cqe_kcqe)
+{
+ struct bnx2i_conn *conn;
+ u32 iscsi_cid;
+
+ iscsi_cid = new_cqe_kcqe->iscsi_conn_id;
+ conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+ if (!conn) {
+ printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid);
+ return;
+ }
+ if (!conn->ep) {
+ printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid);
+ return;
+ }
+
+ bnx2i_process_new_cqes(conn);
+}
+
+
+/**
+ * bnx2i_process_update_conn_cmpl - process iscsi conn update completion KCQE
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * CONN_UPDATE completion handler, this completes iSCSI connection FFP migration
+ */
+static void bnx2i_process_update_conn_cmpl(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *update_kcqe)
+{
+ struct bnx2i_conn *conn;
+ u32 iscsi_cid;
+
+ iscsi_cid = update_kcqe->iscsi_conn_id;
+ conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+ if (!conn) {
+ printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid);
+ return;
+ }
+ if (!conn->ep) {
+ printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid);
+ return;
+ }
+
+ if (update_kcqe->completion_status) {
+ printk(KERN_ALERT "request failed cid %x\n", iscsi_cid);
+ conn->ep->state = EP_STATE_ULP_UPDATE_FAILED;
+ } else
+ conn->ep->state = EP_STATE_ULP_UPDATE_COMPL;
+
+ wake_up_interruptible(&conn->ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_recovery_que_add_conn - add connection to recovery queue
+ * @hba: adapter structure pointer
+ * @bnx2i_conn: iscsi connection
+ *
+ * Add connection to recovery queue and schedule adapter eh worker
+ */
+static void bnx2i_recovery_que_add_conn(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn)
+{
+ iscsi_conn_failure(bnx2i_conn->cls_conn->dd_data,
+ ISCSI_ERR_CONN_FAILED);
+}
+
+
+/**
+ * bnx2i_process_tcp_error - process error notification on a given connection
+ *
+ * @hba: adapter structure pointer
+ * @tcp_err: tcp error kcqe pointer
+ *
+ * handles tcp level error notifications from FW.
+ */
+static void bnx2i_process_tcp_error(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *tcp_err)
+{
+ struct bnx2i_conn *bnx2i_conn;
+ u32 iscsi_cid;
+
+ iscsi_cid = tcp_err->iscsi_conn_id;
+ bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+
+ if (!bnx2i_conn) {
+ printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+ return;
+ }
+
+ printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n",
+ iscsi_cid, tcp_err->completion_status);
+ bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+}
+
+
+/**
+ * bnx2i_process_iscsi_error - process error notification on a given connection
+ * @hba: adapter structure pointer
+ * @iscsi_err: iscsi error kcqe pointer
+ *
+ * handles iscsi error notifications from the FW. Firmware based in initial
+ * handshake classifies iscsi protocol / TCP rfc violation into either
+ * warning or error indications. If indication is of "Error" type, driver
+ * will initiate session recovery for that connection/session. For
+ * "Warning" type indication, driver will put out a system log message
+ * (there will be only one message for each type for the life of the
+ * session, this is to avoid un-necessarily overloading the system)
+ */
+static void bnx2i_process_iscsi_error(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *iscsi_err)
+{
+ struct bnx2i_conn *bnx2i_conn;
+ u32 iscsi_cid;
+ char warn_notice[] = "iscsi_warning";
+ char error_notice[] = "iscsi_error";
+ char additional_notice[64];
+ char *message;
+ int need_recovery;
+ u64 err_mask64;
+
+ iscsi_cid = iscsi_err->iscsi_conn_id;
+ bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid);
+ if (!bnx2i_conn) {
+ printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
+ return;
+ }
+
+ err_mask64 = (0x1ULL << iscsi_err->completion_status);
+
+ if (err_mask64 & iscsi_error_mask) {
+ need_recovery = 0;
+ message = warn_notice;
+ } else {
+ need_recovery = 1;
+ message = error_notice;
+ }
+
+ switch (iscsi_err->completion_status) {
+ case ISCSI_KCQE_COMPLETION_STATUS_HDR_DIG_ERR:
+ strcpy(additional_notice, "hdr digest err");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_DATA_DIG_ERR:
+ strcpy(additional_notice, "data digest err");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_OPCODE:
+ strcpy(additional_notice, "wrong opcode rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_AHS_LEN:
+ strcpy(additional_notice, "AHS len > 0 rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ITT:
+ strcpy(additional_notice, "invalid ITT rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_STATSN:
+ strcpy(additional_notice, "wrong StatSN rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_EXP_DATASN:
+ strcpy(additional_notice, "wrong DataSN rcvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T:
+ strcpy(additional_notice, "pend R2T violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_0:
+ strcpy(additional_notice, "ERL0, UO");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_1:
+ strcpy(additional_notice, "ERL0, U1");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_2:
+ strcpy(additional_notice, "ERL0, U2");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_3:
+ strcpy(additional_notice, "ERL0, U3");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_4:
+ strcpy(additional_notice, "ERL0, U4");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_5:
+ strcpy(additional_notice, "ERL0, U5");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_O_U_6:
+ strcpy(additional_notice, "ERL0, U6");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_RCV_LEN:
+ strcpy(additional_notice, "invalid resi len");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_RCV_PDU_LEN:
+ strcpy(additional_notice, "MRDSL violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_F_BIT_ZERO:
+ strcpy(additional_notice, "F-bit not set");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_NOT_RSRV:
+ strcpy(additional_notice, "invalid TTT");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATASN:
+ strcpy(additional_notice, "invalid DataSN");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REMAIN_BURST_LEN:
+ strcpy(additional_notice, "burst len violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_BUFFER_OFF:
+ strcpy(additional_notice, "buf offset violation");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_LUN:
+ strcpy(additional_notice, "invalid LUN field");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_R2TSN:
+ strcpy(additional_notice, "invalid R2TSN field");
+ break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0 \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_0
+ case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_0:
+ strcpy(additional_notice, "invalid cmd len1");
+ break;
+#define BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1 \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DESIRED_DATA_TRNS_LEN_1
+ case BNX2I_ERR_DESIRED_DATA_TRNS_LEN_1:
+ strcpy(additional_notice, "invalid cmd len2");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_EXCEED:
+ strcpy(additional_notice,
+ "pend r2t exceeds MaxOutstandingR2T value");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_TTT_IS_RSRV:
+ strcpy(additional_notice, "TTT is rsvd");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_MAX_BURST_LEN:
+ strcpy(additional_notice, "MBL violation");
+ break;
+#define BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_DATA_SEG_LEN_NOT_ZERO
+ case BNX2I_ERR_DATA_SEG_LEN_NOT_ZERO:
+ strcpy(additional_notice, "data seg len != 0");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_REJECT_PDU_LEN:
+ strcpy(additional_notice, "reject pdu len error");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_ASYNC_PDU_LEN:
+ strcpy(additional_notice, "async pdu len error");
+ break;
+ case ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_NOPIN_PDU_LEN:
+ strcpy(additional_notice, "nopin pdu len error");
+ break;
+#define BNX2_ERR_PEND_R2T_IN_CLEANUP \
+ ISCSI_KCQE_COMPLETION_STATUS_PROTOCOL_ERR_PEND_R2T_IN_CLEANUP
+ case BNX2_ERR_PEND_R2T_IN_CLEANUP:
+ strcpy(additional_notice, "pend r2t in cleanup");
+ break;
+
+ case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_FRAGMENT:
+ strcpy(additional_notice, "IP fragments rcvd");
+ break;
+ case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_IP_OPTIONS:
+ strcpy(additional_notice, "IP options error");
+ break;
+ case ISCI_KCQE_COMPLETION_STATUS_TCP_ERROR_URGENT_FLAG:
+ strcpy(additional_notice, "urgent flag error");
+ break;
+ default:
+ printk(KERN_ALERT "iscsi_err - unknown err %x\n",
+ iscsi_err->completion_status);
+ }
+
+ if (need_recovery) {
+ iscsi_conn_printk(KERN_ALERT,
+ bnx2i_conn->cls_conn->dd_data,
+ "bnx2i: %s - %s\n",
+ message, additional_notice);
+
+ iscsi_conn_printk(KERN_ALERT,
+ bnx2i_conn->cls_conn->dd_data,
+ "conn_err - hostno %d conn %p, "
+ "iscsi_cid %x cid %x\n",
+ bnx2i_conn->hba->shost->host_no,
+ bnx2i_conn, bnx2i_conn->ep->ep_iscsi_cid,
+ bnx2i_conn->ep->ep_cid);
+ bnx2i_recovery_que_add_conn(bnx2i_conn->hba, bnx2i_conn);
+ } else
+ if (!test_and_set_bit(iscsi_err->completion_status,
+ (void *) &bnx2i_conn->violation_notified))
+ iscsi_conn_printk(KERN_ALERT,
+ bnx2i_conn->cls_conn->dd_data,
+ "bnx2i: %s - %s\n",
+ message, additional_notice);
+}
+
+
+/**
+ * bnx2i_process_conn_destroy_cmpl - process iscsi conn destroy completion
+ * @hba: adapter structure pointer
+ * @conn_destroy: conn destroy kcqe pointer
+ *
+ * handles connection destroy completion request.
+ */
+static void bnx2i_process_conn_destroy_cmpl(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *conn_destroy)
+{
+ struct bnx2i_endpoint *ep;
+
+ ep = bnx2i_find_ep_in_destroy_list(hba, conn_destroy->iscsi_conn_id);
+ if (!ep) {
+ printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending "
+ "offload request, unexpected complection\n");
+ return;
+ }
+
+ if (hba != ep->hba) {
+ printk(KERN_ALERT "conn destroy- error hba mis-match\n");
+ return;
+ }
+
+ if (conn_destroy->completion_status) {
+ printk(KERN_ALERT "conn_destroy_cmpl: op failed\n");
+ ep->state = EP_STATE_CLEANUP_FAILED;
+ } else
+ ep->state = EP_STATE_CLEANUP_CMPL;
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_process_ofld_cmpl - process initial iscsi conn offload completion
+ * @hba: adapter structure pointer
+ * @ofld_kcqe: conn offload kcqe pointer
+ *
+ * handles initial connection offload completion, ep_connect() thread is
+ * woken-up to continue with LLP connect process
+ */
+static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
+ struct iscsi_kcqe *ofld_kcqe)
+{
+ u32 cid_addr;
+ struct bnx2i_endpoint *ep;
+ u32 cid_num;
+
+ ep = bnx2i_find_ep_in_ofld_list(hba, ofld_kcqe->iscsi_conn_id);
+ if (!ep) {
+ printk(KERN_ALERT "ofld_cmpl: no pend offload request\n");
+ return;
+ }
+
+ if (hba != ep->hba) {
+ printk(KERN_ALERT "ofld_cmpl: error hba mis-match\n");
+ return;
+ }
+
+ if (ofld_kcqe->completion_status) {
+ if (ofld_kcqe->completion_status ==
+ ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
+ printk(KERN_ALERT "bnx2i: unable to allocate"
+ " iSCSI context resources\n");
+ ep->state = EP_STATE_OFLD_FAILED;
+ } else {
+ ep->state = EP_STATE_OFLD_COMPL;
+ cid_addr = ofld_kcqe->iscsi_conn_context_id;
+ cid_num = bnx2i_get_cid_num(ep);
+ ep->ep_cid = cid_addr;
+ ep->qp.ctx_base = NULL;
+ }
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+/**
+ * bnx2i_indicate_kcqe - process iscsi conn update completion KCQE
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * Generic KCQ event handler/dispatcher
+ */
+static void bnx2i_indicate_kcqe(void *context, struct kcqe *kcqe[],
+ u32 num_cqe)
+{
+ struct bnx2i_hba *hba = context;
+ int i = 0;
+ struct iscsi_kcqe *ikcqe = NULL;
+
+ while (i < num_cqe) {
+ ikcqe = (struct iscsi_kcqe *) kcqe[i++];
+
+ if (ikcqe->op_code ==
+ ISCSI_KCQE_OPCODE_CQ_EVENT_NOTIFICATION)
+ bnx2i_fastpath_notification(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_OFFLOAD_CONN)
+ bnx2i_process_ofld_cmpl(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_UPDATE_CONN)
+ bnx2i_process_update_conn_cmpl(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_INIT) {
+ if (ikcqe->completion_status !=
+ ISCSI_KCQE_COMPLETION_STATUS_SUCCESS)
+ bnx2i_iscsi_license_error(hba, ikcqe->\
+ completion_status);
+ else {
+ set_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+ bnx2i_get_link_state(hba);
+ printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: "
+ "ISCSI_INIT passed\n",
+ (u8)hba->pcidev->bus->number,
+ hba->pci_devno,
+ (u8)hba->pci_func);
+
+
+ }
+ } else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_DESTROY_CONN)
+ bnx2i_process_conn_destroy_cmpl(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_ISCSI_ERROR)
+ bnx2i_process_iscsi_error(hba, ikcqe);
+ else if (ikcqe->op_code == ISCSI_KCQE_OPCODE_TCP_ERROR)
+ bnx2i_process_tcp_error(hba, ikcqe);
+ else
+ printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
+ ikcqe->op_code);
+ }
+}
+
+
+/**
+ * bnx2i_indicate_netevent - Generic netdev event handler
+ * @context: adapter structure pointer
+ * @event: event type
+ *
+ * Handles four netdev events, NETDEV_UP, NETDEV_DOWN,
+ * NETDEV_GOING_DOWN and NETDEV_CHANGE
+ */
+static void bnx2i_indicate_netevent(void *context, unsigned long event)
+{
+ struct bnx2i_hba *hba = context;
+
+ switch (event) {
+ case NETDEV_UP:
+ if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+ bnx2i_send_fw_iscsi_init_msg(hba);
+ break;
+ case NETDEV_DOWN:
+ clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+ break;
+ case NETDEV_GOING_DOWN:
+ set_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
+ iscsi_host_for_each_session(hba->shost,
+ bnx2i_drop_session);
+ break;
+ case NETDEV_CHANGE:
+ bnx2i_get_link_state(hba);
+ break;
+ default:
+ ;
+ }
+}
+
+
+/**
+ * bnx2i_cm_connect_cmpl - process iscsi conn establishment completion
+ * @cm_sk: cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate completion of option-2 TCP connect request.
+ */
+static void bnx2i_cm_connect_cmpl(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+ ep->state = EP_STATE_CONNECT_FAILED;
+ else if (test_bit(SK_F_OFFLD_COMPLETE, &cm_sk->flags))
+ ep->state = EP_STATE_CONNECT_COMPL;
+ else
+ ep->state = EP_STATE_CONNECT_FAILED;
+
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_close_cmpl - process tcp conn close completion
+ * @cm_sk: cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate completion of option-2 graceful TCP connect shutdown
+ */
+static void bnx2i_cm_close_cmpl(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_DISCONN_COMPL;
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_abort_cmpl - process abortive tcp conn teardown completion
+ * @cm_sk: cnic sock structure pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate completion of option-2 abortive TCP connect termination
+ */
+static void bnx2i_cm_abort_cmpl(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_DISCONN_COMPL;
+ wake_up_interruptible(&ep->ofld_wait);
+}
+
+
+/**
+ * bnx2i_cm_remote_close - process received TCP FIN
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to indicate
+ * async TCP events such as FIN
+ */
+static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_TCP_FIN_RCVD;
+ if (ep->conn)
+ bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+/**
+ * bnx2i_cm_remote_abort - process TCP RST and start conn cleanup
+ * @hba: adapter structure pointer
+ * @update_kcqe: kcqe pointer
+ *
+ * function callback exported via bnx2i - cnic driver interface to
+ * indicate async TCP events (RST) sent by the peer.
+ */
+static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
+{
+ struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+
+ ep->state = EP_STATE_TCP_RST_RCVD;
+ if (ep->conn)
+ bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+}
+
+
+static void bnx2i_send_nl_mesg(struct cnic_dev *dev, u32 msg_type,
+ char *buf, u16 buflen)
+{
+ struct bnx2i_hba *hba;
+
+ hba = bnx2i_find_hba_for_cnic(dev);
+ if (!hba)
+ return;
+
+ if (iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
+ msg_type, buf, buflen))
+ printk(KERN_ALERT "bnx2i: private nl message send error\n");
+
+}
+
+
+/**
+ * bnx2i_cnic_cb - global template of bnx2i - cnic driver interface structure
+ * carrying callback function pointers
+ *
+ */
+struct cnic_ulp_ops bnx2i_cnic_cb = {
+ .cnic_init = bnx2i_ulp_init,
+ .cnic_exit = bnx2i_ulp_exit,
+ .cnic_start = bnx2i_start,
+ .cnic_stop = bnx2i_stop,
+ .indicate_kcqes = bnx2i_indicate_kcqe,
+ .indicate_netevent = bnx2i_indicate_netevent,
+ .cm_connect_complete = bnx2i_cm_connect_cmpl,
+ .cm_close_complete = bnx2i_cm_close_cmpl,
+ .cm_abort_complete = bnx2i_cm_abort_cmpl,
+ .cm_remote_close = bnx2i_cm_remote_close,
+ .cm_remote_abort = bnx2i_cm_remote_abort,
+ .iscsi_nl_send_msg = bnx2i_send_nl_mesg,
+ .owner = THIS_MODULE
+};
+
+
+/**
+ * bnx2i_map_ep_dbell_regs - map connection doorbell registers
+ * @ep: bnx2i endpoint
+ *
+ * maps connection's SQ and RQ doorbell registers, 5706/5708/5709 hosts these
+ * register in BAR #0. Whereas in 57710 these register are accessed by
+ * mapping BAR #1
+ */
+int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
+{
+ u32 cid_num;
+ u32 reg_off;
+ u32 first_l4l5;
+ u32 ctx_sz;
+ u32 config2;
+ resource_size_t reg_base;
+
+ cid_num = bnx2i_get_cid_num(ep);
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
+ reg_base = pci_resource_start(ep->hba->pcidev,
+ BNX2X_DOORBELL_PCI_BAR);
+ reg_off = PAGE_SIZE * (cid_num & 0x1FFFF) + DPM_TRIGER_TYPE;
+ ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off, 4);
+ goto arm_cq;
+ }
+
+ reg_base = ep->hba->netdev->base_addr;
+ if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
+ (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
+ config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
+ first_l4l5 = config2 & BNX2_MQ_CONFIG2_FIRST_L4L5;
+ ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
+ if (ctx_sz)
+ reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
+ + PAGE_SIZE *
+ (((cid_num - first_l4l5) / ctx_sz) + 256);
+ else
+ reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+ } else
+ /* 5709 device in normal node and 5706/5708 devices */
+ reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
+
+ ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+ MB_KERNEL_CTX_SIZE);
+ if (!ep->qp.ctx_base)
+ return -ENOMEM;
+
+arm_cq:
+ bnx2i_arm_cq_event_coalescing(ep, CNIC_ARM_CQE);
+ return 0;
+}
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
new file mode 100644
index 0000000..ae4b2d5
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -0,0 +1,438 @@
+/* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
+static u32 adapter_count;
+static int bnx2i_reg_device;
+
+#define DRV_MODULE_NAME "bnx2i"
+#define DRV_MODULE_VERSION "2.0.1d"
+#define DRV_MODULE_RELDATE "Mar 25, 2009"
+
+static char version[] __devinitdata =
+ "Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
+ " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+
+
+MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709 iSCSI Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+
+static DEFINE_RWLOCK(bnx2i_dev_lock);
+
+unsigned int event_coal_div = 1;
+module_param(event_coal_div, int, 0664);
+MODULE_PARM_DESC(event_coal_div, "Event Coalescing Divide Factor");
+
+unsigned int en_tcp_dack = 1;
+module_param(en_tcp_dack, int, 0664);
+MODULE_PARM_DESC(en_tcp_dack, "Enable TCP Delayed ACK");
+
+unsigned int error_mask1 = 0x00;
+module_param(error_mask1, int, 0664);
+MODULE_PARM_DESC(error_mask1, "Config FW iSCSI Error Mask #1");
+
+unsigned int error_mask2 = 0x00;
+module_param(error_mask2, int, 0664);
+MODULE_PARM_DESC(error_mask2, "Config FW iSCSI Error Mask #2");
+
+unsigned int sq_size;
+module_param(sq_size, int, 0664);
+MODULE_PARM_DESC(sq_size, "Configure SQ size");
+
+unsigned int rq_size = BNX2I_RQ_WQES_DEFAULT;
+module_param(rq_size, int, 0664);
+MODULE_PARM_DESC(rq_size, "Configure RQ size");
+
+u64 iscsi_error_mask = 0x00;
+
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
+
+
+/**
+ * bnx2i_identify_device - identifies NetXtreme II device type
+ * @hba: Adapter structure pointer
+ *
+ * This function identifies the NX2 device type and sets appropriate
+ * queue mailbox register access method, 5709 requires driver to
+ * access MBOX regs using *bin* mode
+ */
+void bnx2i_identify_device(struct bnx2i_hba *hba)
+{
+ hba->cnic_dev_type = 0;
+ if ((hba->pci_did == PCI_DEVICE_ID_NX2_5706) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5706S))
+ set_bit(BNX2I_NX2_DEV_5706, &hba->cnic_dev_type);
+ else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5708) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5708S))
+ set_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type);
+ else if ((hba->pci_did == PCI_DEVICE_ID_NX2_5709) ||
+ (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
+ set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
+ hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
+ } else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
+ hba->pci_did == PCI_DEVICE_ID_NX2_57711)
+ set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
+}
+
+
+/**
+ * get_adapter_list_head - returns head of adapter list
+ */
+struct bnx2i_hba *get_adapter_list_head(void)
+{
+ struct bnx2i_hba *hba = NULL;
+ struct bnx2i_hba *tmp_hba;
+
+ if (!adapter_count)
+ goto hba_not_found;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry(tmp_hba, &adapter_list, link) {
+ if (tmp_hba->cnic && tmp_hba->cnic->cm_select_dev) {
+ hba = tmp_hba;
+ break;
+ }
+ }
+ read_unlock(&bnx2i_dev_lock);
+hba_not_found:
+ return hba;
+}
+
+
+/**
+ * bnx2i_find_hba_for_cnic - maps cnic device instance to bnx2i adapter instance
+ * @cnic: pointer to cnic device instance
+ *
+ */
+struct bnx2i_hba *bnx2i_find_hba_for_cnic(struct cnic_dev *cnic)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link) {
+ if (hba->cnic == cnic) {
+ read_unlock(&bnx2i_dev_lock);
+ return hba;
+ }
+ }
+ read_unlock(&bnx2i_dev_lock);
+ return NULL;
+}
+
+
+/**
+ * bnx2i_start - cnic callback to initialize & start adapter instance
+ * @handle: transparent handle pointing to adapter structure
+ *
+ * This function maps adapter structure to pcidev structure and initiates
+ * firmware handshake to enable/initialize on chip iscsi components
+ * This bnx2i - cnic interface api callback is issued after following
+ * 2 conditions are met -
+ * a) underlying network interface is up (marked by event 'NETDEV_UP'
+ * from netdev
+ * b) bnx2i adapter instance is registered
+ */
+void bnx2i_start(void *handle)
+{
+#define BNX2I_INIT_POLL_TIME (1000 / HZ)
+ struct bnx2i_hba *hba = handle;
+ int i = HZ;
+
+ bnx2i_send_fw_iscsi_init_msg(hba);
+ while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
+ msleep(BNX2I_INIT_POLL_TIME);
+}
+
+
+/**
+ * bnx2i_stop - cnic callback to shutdown adapter instance
+ * @handle: transparent handle pointing to adapter structure
+ *
+ * driver checks if adapter is already in shutdown mode, if not start
+ * the shutdown process
+ */
+void bnx2i_stop(void *handle)
+{
+ struct bnx2i_hba *hba = handle;
+
+ /* check if cleanup happened in GOING_DOWN context */
+ clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
+ if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
+ &hba->adapter_state))
+ iscsi_host_for_each_session(hba->shost,
+ bnx2i_drop_session);
+}
+
+/**
+ * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
+ * @hba: Adapter instance to register
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding the
+ * adapter structure lock
+ */
+void bnx2i_register_device(struct bnx2i_hba *hba)
+{
+ if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+ test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ return;
+ }
+
+ hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device++;
+ spin_unlock(&hba->lock);
+
+ set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+
+/**
+ * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
+ *
+ * registers all bnx2i adapter instances with the cnic driver while holding
+ * the global resource lock
+ */
+void bnx2i_reg_dev_all(void)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link)
+ bnx2i_register_device(hba);
+ read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
+ * @hba: Adapter instance to unregister
+ *
+ * registers bnx2i adapter instance with the cnic driver while holding
+ * the adapter structure lock
+ */
+static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
+{
+ if (hba->ofld_conns_active ||
+ !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
+ test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
+ return;
+
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device--;
+ spin_unlock(&hba->lock);
+
+ /* ep_disconnect could come before NETDEV_DOWN, driver won't
+ * see NETDEV_DOWN as it already unregistered itself.
+ */
+ hba->adapter_state = 0;
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+}
+
+/**
+ * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
+ *
+ * unregisters all bnx2i adapter instances with the cnic driver while holding
+ * the global resource lock
+ */
+void bnx2i_unreg_dev_all(void)
+{
+ struct bnx2i_hba *hba, *temp;
+
+ read_lock(&bnx2i_dev_lock);
+ list_for_each_entry_safe(hba, temp, &adapter_list, link)
+ bnx2i_unreg_one_device(hba);
+ read_unlock(&bnx2i_dev_lock);
+}
+
+
+/**
+ * bnx2i_init_one - initialize an adapter instance and allocate memory resources
+ * @hba: bnx2i adapter instance
+ * @cnic: cnic device handle
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ * below. This routine is called from cnic_register_driver() context and
+ * work horse thread which does majority of device specific initialization
+ */
+static int bnx2i_init_one(struct bnx2i_hba *hba, struct cnic_dev *cnic)
+{
+ int rc;
+
+ read_lock(&bnx2i_dev_lock);
+ if (bnx2i_reg_device &&
+ !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ rc = cnic->register_device(cnic, CNIC_ULP_ISCSI, hba);
+ if (rc) /* duplicate registration */
+ printk(KERN_ERR "bnx2i- dev reg failed\n");
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device++;
+ hba->age++;
+ spin_unlock(&hba->lock);
+
+ set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ }
+ read_unlock(&bnx2i_dev_lock);
+
+ write_lock(&bnx2i_dev_lock);
+ list_add_tail(&hba->link, &adapter_list);
+ adapter_count++;
+ write_unlock(&bnx2i_dev_lock);
+ return 0;
+}
+
+
+/**
+ * bnx2i_ulp_init - initialize an adapter instance
+ * @dev: cnic device handle
+ *
+ * Called from cnic_register_driver() context to initialize all enumerated
+ * cnic devices. This routine allocate adapter structure and other
+ * device specific resources.
+ */
+void bnx2i_ulp_init(struct cnic_dev *dev)
+{
+ struct bnx2i_hba *hba;
+
+ /* Allocate a HBA structure for this device */
+ hba = bnx2i_alloc_hba(dev);
+ if (!hba) {
+ printk(KERN_ERR "bnx2i init: hba initialization failed\n");
+ return;
+ }
+
+ /* Get PCI related information and update hba struct members */
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ if (bnx2i_init_one(hba, dev)) {
+ printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
+ bnx2i_free_hba(hba);
+ } else
+ hba->cnic = dev;
+}
+
+
+/**
+ * bnx2i_ulp_exit - shuts down adapter instance and frees all resources
+ * @dev: cnic device handle
+ *
+ */
+void bnx2i_ulp_exit(struct cnic_dev *dev)
+{
+ struct bnx2i_hba *hba;
+
+ hba = bnx2i_find_hba_for_cnic(dev);
+ if (!hba) {
+ printk(KERN_INFO "bnx2i_ulp_exit: hba not "
+ "found, dev 0x%p\n", dev);
+ return;
+ }
+ write_lock(&bnx2i_dev_lock);
+ list_del_init(&hba->link);
+ adapter_count--;
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+
+ spin_lock(&hba->lock);
+ bnx2i_reg_device--;
+ spin_unlock(&hba->lock);
+ }
+ write_unlock(&bnx2i_dev_lock);
+
+ bnx2i_free_hba(hba);
+}
+
+
+/**
+ * bnx2i_mod_init - module init entry point
+ *
+ * initialize any driver wide global data structures such as endpoint pool,
+ * tcp port manager/queue, sysfs. finally driver will register itself
+ * with the cnic module
+ */
+static int __init bnx2i_mod_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "%s", version);
+
+ if (!is_power_of_2(sq_size))
+ sq_size = roundup_pow_of_two(sq_size);
+
+ bnx2i_scsi_xport_template =
+ iscsi_register_transport(&bnx2i_iscsi_transport);
+ if (!bnx2i_scsi_xport_template) {
+ printk(KERN_ERR "Could not register bnx2i transport.\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ err = cnic_register_driver(CNIC_ULP_ISCSI, &bnx2i_cnic_cb);
+ if (err) {
+ printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
+ goto unreg_xport;
+ }
+
+ return 0;
+
+unreg_xport:
+ iscsi_unregister_transport(&bnx2i_iscsi_transport);
+out:
+ return err;
+}
+
+
+/**
+ * bnx2i_mod_exit - module cleanup/exit entry point
+ *
+ * Global resource lock and host adapter lock is held during critical sections
+ * in this function. Driver will browse through the adapter list, cleans-up
+ * each instance, unregisters iscsi transport name and finally driver will
+ * unregister itself with the cnic module
+ */
+static void __exit bnx2i_mod_exit(void)
+{
+ struct bnx2i_hba *hba;
+
+ write_lock(&bnx2i_dev_lock);
+ while (!list_empty(&adapter_list)) {
+ hba = list_entry(adapter_list.next, struct bnx2i_hba, link);
+ list_del(&hba->link);
+ adapter_count--;
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+ clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+ bnx2i_reg_device--;
+ }
+
+ write_unlock(&bnx2i_dev_lock);
+ bnx2i_free_hba(hba);
+ write_lock(&bnx2i_dev_lock);
+ }
+ write_unlock(&bnx2i_dev_lock);
+
+ iscsi_unregister_transport(&bnx2i_iscsi_transport);
+ cnic_unregister_driver(CNIC_ULP_ISCSI);
+}
+
+module_init(bnx2i_mod_init);
+module_exit(bnx2i_mod_exit);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
new file mode 100644
index 0000000..f741219
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -0,0 +1,2064 @@
+/*
+ * bnx2i_iscsi.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2007, 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (c) 2007, 2008 Mike Christie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/libiscsi.h>
+#include "bnx2i.h"
+
+struct scsi_transport_template *bnx2i_scsi_xport_template;
+struct iscsi_transport bnx2i_iscsi_transport;
+static struct scsi_host_template bnx2i_host_template;
+
+/*
+ * Global endpoint resource info
+ */
+static DEFINE_SPINLOCK(bnx2i_resc_lock); /* protects global resources */
+
+
+static int bnx2i_adapter_ready(struct bnx2i_hba *hba)
+{
+ int retval = 0;
+
+ if (!hba || !test_bit(ADAPTER_STATE_UP, &hba->adapter_state) ||
+ test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
+ test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+ retval = -EPERM;
+ return retval;
+}
+
+/**
+ * bnx2i_get_write_cmd_bd_idx - identifies various BD bookmarks
+ * @cmd: iscsi cmd struct pointer
+ * @buf_off: absolute buffer offset
+ * @start_bd_off: u32 pointer to return the offset within the BD
+ * indicated by 'start_bd_idx' on which 'buf_off' falls
+ * @start_bd_idx: index of the BD on which 'buf_off' falls
+ *
+ * identifies & marks various bd info for scsi command's imm data,
+ * unsolicited data and the first solicited data seq.
+ */
+static void bnx2i_get_write_cmd_bd_idx(struct bnx2i_cmd *cmd, u32 buf_off,
+ u32 *start_bd_off, u32 *start_bd_idx)
+{
+ struct iscsi_bd *bd_tbl = cmd->io_tbl.bd_tbl;
+ u32 cur_offset = 0;
+ u32 cur_bd_idx = 0;
+
+ if (buf_off) {
+ while (buf_off >= (cur_offset + bd_tbl->buffer_length)) {
+ cur_offset += bd_tbl->buffer_length;
+ cur_bd_idx++;
+ bd_tbl++;
+ }
+ }
+
+ *start_bd_off = buf_off - cur_offset;
+ *start_bd_idx = cur_bd_idx;
+}
+
+/**
+ * bnx2i_setup_write_cmd_bd_info - sets up BD various information
+ * @task: transport layer's cmd struct pointer
+ *
+ * identifies & marks various bd info for scsi command's immediate data,
+ * unsolicited data and first solicited data seq which includes BD start
+ * index & BD buf off. his function takes into account iscsi parameter such
+ * as immediate data and unsolicited data is support on this connection.
+ */
+static void bnx2i_setup_write_cmd_bd_info(struct iscsi_task *task)
+{
+ struct bnx2i_cmd *cmd = task->dd_data;
+ u32 start_bd_offset;
+ u32 start_bd_idx;
+ u32 buffer_offset = 0;
+ u32 cmd_len = cmd->req.total_data_transfer_length;
+
+ /* if ImmediateData is turned off & IntialR2T is turned on,
+ * there will be no immediate or unsolicited data, just return.
+ */
+ if (!iscsi_task_has_unsol_data(task) && !task->imm_count)
+ return;
+
+ /* Immediate data */
+ buffer_offset += task->imm_count;
+ if (task->imm_count == cmd_len)
+ return;
+
+ if (iscsi_task_has_unsol_data(task)) {
+ bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+ &start_bd_offset, &start_bd_idx);
+ cmd->req.ud_buffer_offset = start_bd_offset;
+ cmd->req.ud_start_bd_index = start_bd_idx;
+ buffer_offset += task->unsol_r2t.data_length;
+ }
+
+ if (buffer_offset != cmd_len) {
+ bnx2i_get_write_cmd_bd_idx(cmd, buffer_offset,
+ &start_bd_offset, &start_bd_idx);
+ if ((start_bd_offset > task->conn->session->first_burst) ||
+ (start_bd_idx > scsi_sg_count(cmd->scsi_cmd))) {
+ int i = 0;
+
+ iscsi_conn_printk(KERN_ALERT, task->conn,
+ "bnx2i- error, buf offset 0x%x "
+ "bd_valid %d use_sg %d\n",
+ buffer_offset, cmd->io_tbl.bd_valid,
+ scsi_sg_count(cmd->scsi_cmd));
+ for (i = 0; i < cmd->io_tbl.bd_valid; i++)
+ iscsi_conn_printk(KERN_ALERT, task->conn,
+ "bnx2i err, bd[%d]: len %x\n",
+ i, cmd->io_tbl.bd_tbl[i].\
+ buffer_length);
+ }
+ cmd->req.sd_buffer_offset = start_bd_offset;
+ cmd->req.sd_start_bd_index = start_bd_idx;
+ }
+}
+
+
+
+/**
+ * bnx2i_map_scsi_sg - maps IO buffer and prepares the BD table
+ * @hba: adapter instance
+ * @cmd: iscsi cmd struct pointer
+ *
+ * map SG list
+ */
+static int bnx2i_map_scsi_sg(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
+{
+ struct scsi_cmnd *sc = cmd->scsi_cmd;
+ struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+ struct scatterlist *sg;
+ int byte_count = 0;
+ int bd_count = 0;
+ int sg_count;
+ int sg_len;
+ u64 addr;
+ int i;
+
+ BUG_ON(scsi_sg_count(sc) > ISCSI_MAX_BDS_PER_CMD);
+
+ sg_count = scsi_dma_map(sc);
+
+ scsi_for_each_sg(sc, sg, sg_count, i) {
+ sg_len = sg_dma_len(sg);
+ addr = (u64) sg_dma_address(sg);
+ bd[bd_count].buffer_addr_lo = addr & 0xffffffff;
+ bd[bd_count].buffer_addr_hi = addr >> 32;
+ bd[bd_count].buffer_length = sg_len;
+ bd[bd_count].flags = 0;
+ if (bd_count == 0)
+ bd[bd_count].flags = ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+ byte_count += sg_len;
+ bd_count++;
+ }
+
+ if (bd_count)
+ bd[bd_count - 1].flags |= ISCSI_BD_LAST_IN_BD_CHAIN;
+
+ BUG_ON(byte_count != scsi_bufflen(sc));
+ return bd_count;
+}
+
+/**
+ * bnx2i_iscsi_map_sg_list - maps SG list
+ * @cmd: iscsi cmd struct pointer
+ *
+ * creates BD list table for the command
+ */
+static void bnx2i_iscsi_map_sg_list(struct bnx2i_cmd *cmd)
+{
+ int bd_count;
+
+ bd_count = bnx2i_map_scsi_sg(cmd->conn->hba, cmd);
+ if (!bd_count) {
+ struct iscsi_bd *bd = cmd->io_tbl.bd_tbl;
+
+ bd[0].buffer_addr_lo = bd[0].buffer_addr_hi = 0;
+ bd[0].buffer_length = bd[0].flags = 0;
+ }
+ cmd->io_tbl.bd_valid = bd_count;
+}
+
+
+/**
+ * bnx2i_iscsi_unmap_sg_list - unmaps SG list
+ * @cmd: iscsi cmd struct pointer
+ *
+ * unmap IO buffers and invalidate the BD table
+ */
+void bnx2i_iscsi_unmap_sg_list(struct bnx2i_cmd *cmd)
+{
+ struct scsi_cmnd *sc = cmd->scsi_cmd;
+
+ if (cmd->io_tbl.bd_valid && sc) {
+ scsi_dma_unmap(sc);
+ cmd->io_tbl.bd_valid = 0;
+ }
+}
+
+static void bnx2i_setup_cmd_wqe_template(struct bnx2i_cmd *cmd)
+{
+ memset(&cmd->req, 0x00, sizeof(cmd->req));
+ cmd->req.op_code = 0xFF;
+ cmd->req.bd_list_addr_lo = (u32) cmd->io_tbl.bd_tbl_dma;
+ cmd->req.bd_list_addr_hi =
+ (u32) ((u64) cmd->io_tbl.bd_tbl_dma >> 32);
+
+}
+
+
+/**
+ * bnx2i_bind_conn_to_iscsi_cid - bind conn structure to 'iscsi_cid'
+ * @hba: pointer to adapter instance
+ * @conn: pointer to iscsi connection
+ * @iscsi_cid: iscsi context ID, range 0 - (MAX_CONN - 1)
+ *
+ * update iscsi cid table entry with connection pointer. This enables
+ * driver to quickly get hold of connection structure pointer in
+ * completion/interrupt thread using iscsi context ID
+ */
+static int bnx2i_bind_conn_to_iscsi_cid(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn,
+ u32 iscsi_cid)
+{
+ if (hba && hba->cid_que.conn_cid_tbl[iscsi_cid]) {
+ iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+ "conn bind - entry #%d not free\n", iscsi_cid);
+ return -EBUSY;
+ }
+
+ hba->cid_que.conn_cid_tbl[iscsi_cid] = bnx2i_conn;
+ return 0;
+}
+
+
+/**
+ * bnx2i_get_conn_from_id - maps an iscsi cid to corresponding conn ptr
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID, range 0 - (MAX_CONN - 1)
+ */
+struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
+ u16 iscsi_cid)
+{
+ if (!hba->cid_que.conn_cid_tbl) {
+ printk(KERN_ERR "bnx2i: ERROR - missing conn<->cid table\n");
+ return NULL;
+
+ } else if (iscsi_cid >= hba->max_active_conns) {
+ printk(KERN_ERR "bnx2i: wrong cid #%d\n", iscsi_cid);
+ return NULL;
+ }
+ return hba->cid_que.conn_cid_tbl[iscsi_cid];
+}
+
+
+/**
+ * bnx2i_alloc_iscsi_cid - allocates a iscsi_cid from free pool
+ * @hba: pointer to adapter instance
+ */
+static u32 bnx2i_alloc_iscsi_cid(struct bnx2i_hba *hba)
+{
+ int idx;
+
+ if (!hba->cid_que.cid_free_cnt)
+ return -1;
+
+ idx = hba->cid_que.cid_q_cons_idx;
+ hba->cid_que.cid_q_cons_idx++;
+ if (hba->cid_que.cid_q_cons_idx == hba->cid_que.cid_q_max_idx)
+ hba->cid_que.cid_q_cons_idx = 0;
+
+ hba->cid_que.cid_free_cnt--;
+ return hba->cid_que.cid_que[idx];
+}
+
+
+/**
+ * bnx2i_free_iscsi_cid - returns tcp port to free list
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID to free
+ */
+static void bnx2i_free_iscsi_cid(struct bnx2i_hba *hba, u16 iscsi_cid)
+{
+ int idx;
+
+ if (iscsi_cid == (u16) -1)
+ return;
+
+ hba->cid_que.cid_free_cnt++;
+
+ idx = hba->cid_que.cid_q_prod_idx;
+ hba->cid_que.cid_que[idx] = iscsi_cid;
+ hba->cid_que.conn_cid_tbl[iscsi_cid] = NULL;
+ hba->cid_que.cid_q_prod_idx++;
+ if (hba->cid_que.cid_q_prod_idx == hba->cid_que.cid_q_max_idx)
+ hba->cid_que.cid_q_prod_idx = 0;
+}
+
+
+/**
+ * bnx2i_setup_free_cid_que - sets up free iscsi cid queue
+ * @hba: pointer to adapter instance
+ *
+ * allocates memory for iscsi cid queue & 'cid - conn ptr' mapping table,
+ * and initialize table attributes
+ */
+static int bnx2i_setup_free_cid_que(struct bnx2i_hba *hba)
+{
+ int mem_size;
+ int i;
+
+ mem_size = hba->max_active_conns * sizeof(u32);
+ mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+
+ hba->cid_que.cid_que_base = kmalloc(mem_size, GFP_KERNEL);
+ if (!hba->cid_que.cid_que_base)
+ return -ENOMEM;
+
+ mem_size = hba->max_active_conns * sizeof(struct bnx2i_conn *);
+ mem_size = (mem_size + (PAGE_SIZE - 1)) & PAGE_MASK;
+ hba->cid_que.conn_cid_tbl = kmalloc(mem_size, GFP_KERNEL);
+ if (!hba->cid_que.conn_cid_tbl) {
+ kfree(hba->cid_que.cid_que_base);
+ hba->cid_que.cid_que_base = NULL;
+ return -ENOMEM;
+ }
+
+ hba->cid_que.cid_que = (u32 *)hba->cid_que.cid_que_base;
+ hba->cid_que.cid_q_prod_idx = 0;
+ hba->cid_que.cid_q_cons_idx = 0;
+ hba->cid_que.cid_q_max_idx = hba->max_active_conns;
+ hba->cid_que.cid_free_cnt = hba->max_active_conns;
+
+ for (i = 0; i < hba->max_active_conns; i++) {
+ hba->cid_que.cid_que[i] = i;
+ hba->cid_que.conn_cid_tbl[i] = NULL;
+ }
+ return 0;
+}
+
+
+/**
+ * bnx2i_release_free_cid_que - releases 'iscsi_cid' queue resources
+ * @hba: pointer to adapter instance
+ */
+static void bnx2i_release_free_cid_que(struct bnx2i_hba *hba)
+{
+ kfree(hba->cid_que.cid_que_base);
+ hba->cid_que.cid_que_base = NULL;
+
+ kfree(hba->cid_que.conn_cid_tbl);
+ hba->cid_que.conn_cid_tbl = NULL;
+}
+
+
+/**
+ * bnx2i_alloc_ep - allocates ep structure from global pool
+ * @hba: pointer to adapter instance
+ *
+ * routine allocates a free endpoint structure from global pool and
+ * a tcp port to be used for this connection. Global resource lock,
+ * 'bnx2i_resc_lock' is held while accessing shared global data structures
+ */
+static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba)
+{
+ struct iscsi_endpoint *ep;
+ struct bnx2i_endpoint *bnx2i_ep;
+
+ ep = iscsi_create_endpoint(sizeof(*bnx2i_ep));
+ if (!ep) {
+ printk(KERN_ERR "bnx2i: Could not allocate ep\n");
+ return NULL;
+ }
+
+ bnx2i_ep = ep->dd_data;
+ INIT_LIST_HEAD(&bnx2i_ep->link);
+ bnx2i_ep->state = EP_STATE_IDLE;
+ bnx2i_ep->hba = hba;
+ bnx2i_ep->hba_age = hba->age;
+ hba->ofld_conns_active++;
+ init_waitqueue_head(&bnx2i_ep->ofld_wait);
+ return ep;
+}
+
+
+/**
+ * bnx2i_free_ep - free endpoint
+ * @ep: pointer to iscsi endpoint structure
+ */
+static void bnx2i_free_ep(struct iscsi_endpoint *ep)
+{
+ struct bnx2i_endpoint *bnx2i_ep = ep->dd_data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bnx2i_resc_lock, flags);
+ bnx2i_ep->state = EP_STATE_IDLE;
+ bnx2i_ep->hba->ofld_conns_active--;
+
+ bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+ if (bnx2i_ep->conn) {
+ bnx2i_ep->conn->ep = NULL;
+ bnx2i_ep->conn = NULL;
+ }
+
+ bnx2i_ep->hba = NULL;
+ spin_unlock_irqrestore(&bnx2i_resc_lock, flags);
+ iscsi_destroy_endpoint(ep);
+}
+
+
+/**
+ * bnx2i_alloc_bdt - allocates buffer descriptor (BD) table for the command
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ * @cmd: iscsi command structure
+ */
+static int bnx2i_alloc_bdt(struct bnx2i_hba *hba, struct iscsi_session *session,
+ struct bnx2i_cmd *cmd)
+{
+ struct io_bdt *io = &cmd->io_tbl;
+ struct iscsi_bd *bd;
+
+ io->bd_tbl = dma_alloc_coherent(&hba->pcidev->dev,
+ ISCSI_MAX_BDS_PER_CMD * sizeof(*bd),
+ &io->bd_tbl_dma, GFP_KERNEL);
+ if (!io->bd_tbl) {
+ iscsi_session_printk(KERN_ERR, session, "Could not "
+ "allocate bdt.\n");
+ return -ENOMEM;
+ }
+ io->bd_valid = 0;
+ return 0;
+}
+
+/**
+ * bnx2i_destroy_cmd_pool - destroys iscsi command pool and release BD table
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ * @cmd: iscsi command structure
+ */
+static void bnx2i_destroy_cmd_pool(struct bnx2i_hba *hba,
+ struct iscsi_session *session)
+{
+ int i;
+
+ for (i = 0; i < session->cmds_max; i++) {
+ struct iscsi_task *task = session->cmds[i];
+ struct bnx2i_cmd *cmd = task->dd_data;
+
+ if (cmd->io_tbl.bd_tbl)
+ dma_free_coherent(&hba->pcidev->dev,
+ ISCSI_MAX_BDS_PER_CMD *
+ sizeof(struct iscsi_bd),
+ cmd->io_tbl.bd_tbl,
+ cmd->io_tbl.bd_tbl_dma);
+ }
+
+}
+
+
+/**
+ * bnx2i_setup_cmd_pool - sets up iscsi command pool for the session
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ */
+static int bnx2i_setup_cmd_pool(struct bnx2i_hba *hba,
+ struct iscsi_session *session)
+{
+ int i;
+
+ for (i = 0; i < session->cmds_max; i++) {
+ struct iscsi_task *task = session->cmds[i];
+ struct bnx2i_cmd *cmd = task->dd_data;
+
+ /* Anil */
+ task->hdr = &cmd->hdr;
+ task->hdr_max = sizeof(struct iscsi_hdr);
+
+ if (bnx2i_alloc_bdt(hba, session, cmd))
+ goto free_bdts;
+ }
+
+ return 0;
+
+free_bdts:
+ bnx2i_destroy_cmd_pool(hba, session);
+ return -ENOMEM;
+}
+
+
+/**
+ * bnx2i_setup_mp_bdt - allocate BD table resources
+ * @hba: pointer to adapter structure
+ *
+ * Allocate memory for dummy buffer and associated BD
+ * table to be used by middle path (MP) requests
+ */
+static int bnx2i_setup_mp_bdt(struct bnx2i_hba *hba)
+{
+ int rc = 0;
+ struct iscsi_bd *mp_bdt;
+ u64 addr;
+
+ hba->mp_bd_tbl = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &hba->mp_bd_dma, GFP_KERNEL);
+ if (!hba->mp_bd_tbl) {
+ printk(KERN_ERR "unable to allocate Middle Path BDT\n");
+ rc = -1;
+ goto out;
+ }
+
+ hba->dummy_buffer = dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &hba->dummy_buf_dma, GFP_KERNEL);
+ if (!hba->dummy_buffer) {
+ printk(KERN_ERR "unable to alloc Middle Path Dummy Buffer\n");
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ hba->mp_bd_tbl, hba->mp_bd_dma);
+ hba->mp_bd_tbl = NULL;
+ rc = -1;
+ goto out;
+ }
+
+ mp_bdt = (struct iscsi_bd *) hba->mp_bd_tbl;
+ addr = (unsigned long) hba->dummy_buf_dma;
+ mp_bdt->buffer_addr_lo = addr & 0xffffffff;
+ mp_bdt->buffer_addr_hi = addr >> 32;
+ mp_bdt->buffer_length = PAGE_SIZE;
+ mp_bdt->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+ ISCSI_BD_FIRST_IN_BD_CHAIN;
+out:
+ return rc;
+}
+
+
+/**
+ * bnx2i_free_mp_bdt - releases ITT back to free pool
+ * @hba: pointer to adapter instance
+ *
+ * free MP dummy buffer and associated BD table
+ */
+static void bnx2i_free_mp_bdt(struct bnx2i_hba *hba)
+{
+ if (hba->mp_bd_tbl) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ hba->mp_bd_tbl, hba->mp_bd_dma);
+ hba->mp_bd_tbl = NULL;
+ }
+ if (hba->dummy_buffer) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ hba->dummy_buffer, hba->dummy_buf_dma);
+ hba->dummy_buffer = NULL;
+ }
+ return;
+}
+
+/**
+ * bnx2i_drop_session - notifies iscsid of connection error.
+ * @hba: adapter instance pointer
+ * @session: iscsi session pointer
+ *
+ * This notifies iscsid that there is a error, so it can initiate
+ * recovery.
+ *
+ * This relies on caller using the iscsi class iterator so the object
+ * is refcounted and does not disapper from under us.
+ */
+void bnx2i_drop_session(struct iscsi_cls_session *cls_session)
+{
+ iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED);
+}
+
+/**
+ * bnx2i_ep_destroy_list_add - add an entry to EP destroy list
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_add(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_add_tail(&ep->link, &hba->ep_destroy_list);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+ return 0;
+}
+
+/**
+ * bnx2i_ep_destroy_list_del - add an entry to EP destroy list
+ *
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * EP destroy queue manager
+ */
+static int bnx2i_ep_destroy_list_del(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_del_init(&ep->link);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+
+ return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_add - add an entry to ep offload pending list
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_add(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_add_tail(&ep->link, &hba->ep_ofld_list);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+ return 0;
+}
+
+/**
+ * bnx2i_ep_ofld_list_del - add an entry to ep offload pending list
+ * @hba: pointer to adapter instance
+ * @ep: pointer to endpoint (transport indentifier) structure
+ *
+ * pending conn offload completion queue manager
+ */
+static int bnx2i_ep_ofld_list_del(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ write_lock_bh(&hba->ep_rdwr_lock);
+ list_del_init(&ep->link);
+ write_unlock_bh(&hba->ep_rdwr_lock);
+ return 0;
+}
+
+
+/**
+ * bnx2i_find_ep_in_ofld_list - find iscsi_cid in pending list of endpoints
+ *
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_ofld_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+ struct list_head *list;
+ struct list_head *tmp;
+ struct bnx2i_endpoint *ep;
+
+ read_lock_bh(&hba->ep_rdwr_lock);
+ list_for_each_safe(list, tmp, &hba->ep_ofld_list) {
+ ep = (struct bnx2i_endpoint *)list;
+
+ if (ep->ep_iscsi_cid == iscsi_cid)
+ break;
+ ep = NULL;
+ }
+ read_unlock_bh(&hba->ep_rdwr_lock);
+
+ if (!ep)
+ printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+ return ep;
+}
+
+
+/**
+ * bnx2i_find_ep_in_destroy_list - find iscsi_cid in destroy list
+ * @hba: pointer to adapter instance
+ * @iscsi_cid: iscsi context ID to find
+ *
+ */
+struct bnx2i_endpoint *
+bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid)
+{
+ struct list_head *list;
+ struct list_head *tmp;
+ struct bnx2i_endpoint *ep;
+
+ read_lock_bh(&hba->ep_rdwr_lock);
+ list_for_each_safe(list, tmp, &hba->ep_destroy_list) {
+ ep = (struct bnx2i_endpoint *)list;
+
+ if (ep->ep_iscsi_cid == iscsi_cid)
+ break;
+ ep = NULL;
+ }
+ read_unlock_bh(&hba->ep_rdwr_lock);
+
+ if (!ep)
+ printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
+
+ return ep;
+}
+
+/**
+ * bnx2i_setup_host_queue_size - assigns shost->can_queue param
+ * @hba: pointer to adapter instance
+ * @shost: scsi host pointer
+ *
+ * Initializes 'can_queue' parameter based on how many outstanding commands
+ * the device can handle. Each device 5708/5709/57710 has different
+ * capabilities
+ */
+static void bnx2i_setup_host_queue_size(struct bnx2i_hba *hba,
+ struct Scsi_Host *shost)
+{
+ if (test_bit(BNX2I_NX2_DEV_5708, &hba->cnic_dev_type))
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+ else if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type))
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5709;
+ else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_57710;
+ else
+ shost->can_queue = ISCSI_MAX_CMDS_PER_HBA_5708;
+}
+
+
+/**
+ * bnx2i_alloc_hba - allocate and init adapter instance
+ * @cnic: cnic device pointer
+ *
+ * allocate & initialize adapter structure and call other
+ * support routines to do per adapter initialization
+ */
+struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
+{
+ struct Scsi_Host *shost;
+ struct bnx2i_hba *hba;
+
+ shost = iscsi_host_alloc(&bnx2i_host_template, sizeof(*hba), 0);
+ if (!shost)
+ return NULL;
+ shost->dma_boundary = cnic->pcidev->dma_mask;
+ shost->transportt = bnx2i_scsi_xport_template;
+ shost->max_id = ISCSI_MAX_CONNS_PER_HBA;
+ shost->max_channel = 0;
+ shost->max_lun = 512;
+ shost->max_cmd_len = 16;
+
+ hba = iscsi_host_priv(shost);
+ hba->shost = shost;
+ hba->netdev = cnic->netdev;
+ /* Get PCI related information and update hba struct members */
+ hba->pcidev = cnic->pcidev;
+ pci_dev_get(hba->pcidev);
+ hba->pci_did = hba->pcidev->device;
+ hba->pci_vid = hba->pcidev->vendor;
+ hba->pci_sdid = hba->pcidev->subsystem_device;
+ hba->pci_svid = hba->pcidev->subsystem_vendor;
+ hba->pci_func = PCI_FUNC(hba->pcidev->devfn);
+ hba->pci_devno = PCI_SLOT(hba->pcidev->devfn);
+ bnx2i_identify_device(hba);
+
+ bnx2i_identify_device(hba);
+ bnx2i_setup_host_queue_size(hba, shost);
+
+ if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
+ hba->regview = ioremap_nocache(hba->netdev->base_addr,
+ BNX2_MQ_CONFIG2);
+ if (!hba->regview)
+ goto ioreg_map_err;
+ } else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+ hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+ if (!hba->regview)
+ goto ioreg_map_err;
+ }
+
+ if (bnx2i_setup_mp_bdt(hba))
+ goto mp_bdt_mem_err;
+
+ INIT_LIST_HEAD(&hba->ep_ofld_list);
+ INIT_LIST_HEAD(&hba->ep_destroy_list);
+ rwlock_init(&hba->ep_rdwr_lock);
+
+ hba->mtu_supported = BNX2I_MAX_MTU_SUPPORTED;
+
+ /* different values for 5708/5709/57710 */
+ hba->max_active_conns = ISCSI_MAX_CONNS_PER_HBA;
+
+ if (bnx2i_setup_free_cid_que(hba))
+ goto cid_que_err;
+
+ /* SQ/RQ/CQ size can be changed via sysfx interface */
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+ if (sq_size && sq_size <= BNX2I_5770X_SQ_WQES_MAX)
+ hba->max_sqes = sq_size;
+ else
+ hba->max_sqes = BNX2I_5770X_SQ_WQES_DEFAULT;
+ } else { /* 5706/5708/5709 */
+ if (sq_size && sq_size <= BNX2I_570X_SQ_WQES_MAX)
+ hba->max_sqes = sq_size;
+ else
+ hba->max_sqes = BNX2I_570X_SQ_WQES_DEFAULT;
+ }
+
+ hba->max_rqes = rq_size;
+ hba->max_cqes = hba->max_sqes + rq_size;
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
+ if (hba->max_cqes > BNX2I_5770X_CQ_WQES_MAX)
+ hba->max_cqes = BNX2I_5770X_CQ_WQES_MAX;
+ } else if (hba->max_cqes > BNX2I_570X_CQ_WQES_MAX)
+ hba->max_cqes = BNX2I_570X_CQ_WQES_MAX;
+
+ hba->num_ccell = hba->max_sqes / 2;
+
+ spin_lock_init(&hba->lock);
+ mutex_init(&hba->net_dev_lock);
+
+ if (iscsi_host_add(shost, &hba->pcidev->dev))
+ goto free_dump_mem;
+ return hba;
+
+free_dump_mem:
+ bnx2i_release_free_cid_que(hba);
+cid_que_err:
+ bnx2i_free_mp_bdt(hba);
+mp_bdt_mem_err:
+ if (hba->regview) {
+ iounmap(hba->regview);
+ hba->regview = NULL;
+ }
+ioreg_map_err:
+ pci_dev_put(hba->pcidev);
+ scsi_host_put(shost);
+ return NULL;
+}
+
+/**
+ * bnx2i_free_hba- releases hba structure and resources held by the adapter
+ * @hba: pointer to adapter instance
+ *
+ * free adapter structure and call various cleanup routines.
+ */
+void bnx2i_free_hba(struct bnx2i_hba *hba)
+{
+ struct Scsi_Host *shost = hba->shost;
+
+ iscsi_host_remove(shost);
+ INIT_LIST_HEAD(&hba->ep_ofld_list);
+ INIT_LIST_HEAD(&hba->ep_destroy_list);
+ pci_dev_put(hba->pcidev);
+
+ if (hba->regview) {
+ iounmap(hba->regview);
+ hba->regview = NULL;
+ }
+ bnx2i_free_mp_bdt(hba);
+ bnx2i_release_free_cid_que(hba);
+ iscsi_host_free(shost);
+}
+
+/**
+ * bnx2i_conn_free_login_resources - free DMA resources used for login process
+ * @hba: pointer to adapter instance
+ * @bnx2i_conn: iscsi connection pointer
+ *
+ * Login related resources, mostly BDT & payload DMA memory is freed
+ */
+static void bnx2i_conn_free_login_resources(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn)
+{
+ if (bnx2i_conn->gen_pdu.resp_bd_tbl) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ bnx2i_conn->gen_pdu.resp_bd_tbl,
+ bnx2i_conn->gen_pdu.resp_bd_dma);
+ bnx2i_conn->gen_pdu.resp_bd_tbl = NULL;
+ }
+
+ if (bnx2i_conn->gen_pdu.req_bd_tbl) {
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ bnx2i_conn->gen_pdu.req_bd_tbl,
+ bnx2i_conn->gen_pdu.req_bd_dma);
+ bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+ }
+
+ if (bnx2i_conn->gen_pdu.resp_buf) {
+ dma_free_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.resp_buf,
+ bnx2i_conn->gen_pdu.resp_dma_addr);
+ bnx2i_conn->gen_pdu.resp_buf = NULL;
+ }
+
+ if (bnx2i_conn->gen_pdu.req_buf) {
+ dma_free_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.req_buf,
+ bnx2i_conn->gen_pdu.req_dma_addr);
+ bnx2i_conn->gen_pdu.req_buf = NULL;
+ }
+}
+
+/**
+ * bnx2i_conn_alloc_login_resources - alloc DMA resources for login/nop.
+ * @hba: pointer to adapter instance
+ * @bnx2i_conn: iscsi connection pointer
+ *
+ * Mgmt task DNA resources are allocated in this routine.
+ */
+static int bnx2i_conn_alloc_login_resources(struct bnx2i_hba *hba,
+ struct bnx2i_conn *bnx2i_conn)
+{
+ /* Allocate memory for login request/response buffers */
+ bnx2i_conn->gen_pdu.req_buf =
+ dma_alloc_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ &bnx2i_conn->gen_pdu.req_dma_addr,
+ GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.req_buf == NULL)
+ goto login_req_buf_failure;
+
+ bnx2i_conn->gen_pdu.req_buf_size = 0;
+ bnx2i_conn->gen_pdu.req_wr_ptr = bnx2i_conn->gen_pdu.req_buf;
+
+ bnx2i_conn->gen_pdu.resp_buf =
+ dma_alloc_coherent(&hba->pcidev->dev,
+ ISCSI_DEF_MAX_RECV_SEG_LEN,
+ &bnx2i_conn->gen_pdu.resp_dma_addr,
+ GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.resp_buf == NULL)
+ goto login_resp_buf_failure;
+
+ bnx2i_conn->gen_pdu.resp_buf_size = ISCSI_DEF_MAX_RECV_SEG_LEN;
+ bnx2i_conn->gen_pdu.resp_wr_ptr = bnx2i_conn->gen_pdu.resp_buf;
+
+ bnx2i_conn->gen_pdu.req_bd_tbl =
+ dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &bnx2i_conn->gen_pdu.req_bd_dma, GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.req_bd_tbl == NULL)
+ goto login_req_bd_tbl_failure;
+
+ bnx2i_conn->gen_pdu.resp_bd_tbl =
+ dma_alloc_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ &bnx2i_conn->gen_pdu.resp_bd_dma,
+ GFP_KERNEL);
+ if (bnx2i_conn->gen_pdu.resp_bd_tbl == NULL)
+ goto login_resp_bd_tbl_failure;
+
+ return 0;
+
+login_resp_bd_tbl_failure:
+ dma_free_coherent(&hba->pcidev->dev, PAGE_SIZE,
+ bnx2i_conn->gen_pdu.req_bd_tbl,
+ bnx2i_conn->gen_pdu.req_bd_dma);
+ bnx2i_conn->gen_pdu.req_bd_tbl = NULL;
+
+login_req_bd_tbl_failure:
+ dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.resp_buf,
+ bnx2i_conn->gen_pdu.resp_dma_addr);
+ bnx2i_conn->gen_pdu.resp_buf = NULL;
+login_resp_buf_failure:
+ dma_free_coherent(&hba->pcidev->dev, ISCSI_DEF_MAX_RECV_SEG_LEN,
+ bnx2i_conn->gen_pdu.req_buf,
+ bnx2i_conn->gen_pdu.req_dma_addr);
+ bnx2i_conn->gen_pdu.req_buf = NULL;
+login_req_buf_failure:
+ iscsi_conn_printk(KERN_ERR, bnx2i_conn->cls_conn->dd_data,
+ "login resource alloc failed!!\n");
+ return -ENOMEM;
+
+}
+
+
+/**
+ * bnx2i_iscsi_prep_generic_pdu_bd - prepares BD table.
+ * @bnx2i_conn: iscsi connection pointer
+ *
+ * Allocates buffers and BD tables before shipping requests to cnic
+ * for PDUs prepared by 'iscsid' daemon
+ */
+static void bnx2i_iscsi_prep_generic_pdu_bd(struct bnx2i_conn *bnx2i_conn)
+{
+ struct iscsi_bd *bd_tbl;
+
+ bd_tbl = (struct iscsi_bd *) bnx2i_conn->gen_pdu.req_bd_tbl;
+
+ bd_tbl->buffer_addr_hi =
+ (u32) ((u64) bnx2i_conn->gen_pdu.req_dma_addr >> 32);
+ bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.req_dma_addr;
+ bd_tbl->buffer_length = bnx2i_conn->gen_pdu.req_wr_ptr -
+ bnx2i_conn->gen_pdu.req_buf;
+ bd_tbl->reserved0 = 0;
+ bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+ ISCSI_BD_FIRST_IN_BD_CHAIN;
+
+ bd_tbl = (struct iscsi_bd *) bnx2i_conn->gen_pdu.resp_bd_tbl;
+ bd_tbl->buffer_addr_hi = (u64) bnx2i_conn->gen_pdu.resp_dma_addr >> 32;
+ bd_tbl->buffer_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_dma_addr;
+ bd_tbl->buffer_length = ISCSI_DEF_MAX_RECV_SEG_LEN;
+ bd_tbl->reserved0 = 0;
+ bd_tbl->flags = ISCSI_BD_LAST_IN_BD_CHAIN |
+ ISCSI_BD_FIRST_IN_BD_CHAIN;
+}
+
+
+/**
+ * bnx2i_iscsi_send_generic_request - called to send mgmt tasks.
+ * @task: transport layer task pointer
+ *
+ * called to transmit PDUs prepared by the 'iscsid' daemon. iSCSI login,
+ * Nop-out and Logout requests flow through this path.
+ */
+static int bnx2i_iscsi_send_generic_request(struct iscsi_task *task)
+{
+ struct bnx2i_cmd *cmd = task->dd_data;
+ struct bnx2i_conn *bnx2i_conn = cmd->conn;
+ int rc = 0;
+ char *buf;
+ int data_len;
+
+ bnx2i_iscsi_prep_generic_pdu_bd(bnx2i_conn);
+ switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
+ case ISCSI_OP_LOGIN:
+ bnx2i_send_iscsi_login(bnx2i_conn, task);
+ break;
+ case ISCSI_OP_NOOP_OUT:
+ data_len = bnx2i_conn->gen_pdu.req_buf_size;
+ buf = bnx2i_conn->gen_pdu.req_buf;
+ if (data_len)
+ rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+ RESERVED_ITT,
+ buf, data_len, 1);
+ else
+ rc = bnx2i_send_iscsi_nopout(bnx2i_conn, task,
+ RESERVED_ITT,
+ NULL, 0, 1);
+ break;
+ case ISCSI_OP_LOGOUT:
+ rc = bnx2i_send_iscsi_logout(bnx2i_conn, task);
+ break;
+ case ISCSI_OP_SCSI_TMFUNC:
+ rc = bnx2i_send_iscsi_tmf(bnx2i_conn, task);
+ break;
+ default:
+ iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
+ "send_gen: unsupported op 0x%x\n",
+ task->hdr->opcode);
+ }
+ return rc;
+}
+
+
+/**********************************************************************
+ * SCSI-ML Interface
+ **********************************************************************/
+
+/**
+ * bnx2i_cpy_scsi_cdb - copies LUN & CDB fields in required format to sq wqe
+ * @sc: SCSI-ML command pointer
+ * @cmd: iscsi cmd pointer
+ */
+static void bnx2i_cpy_scsi_cdb(struct scsi_cmnd *sc, struct bnx2i_cmd *cmd)
+{
+ u32 dword;
+ int lpcnt;
+ u8 *srcp;
+ u32 *dstp;
+ u32 scsi_lun[2];
+
+ int_to_scsilun(sc->device->lun, (struct scsi_lun *) scsi_lun);
+ cmd->req.lun[0] = be32_to_cpu(scsi_lun[0]);
+ cmd->req.lun[1] = be32_to_cpu(scsi_lun[1]);
+
+ lpcnt = cmd->scsi_cmd->cmd_len / sizeof(dword);
+ srcp = (u8 *) sc->cmnd;
+ dstp = (u32 *) cmd->req.cdb;
+ while (lpcnt--) {
+ memcpy(&dword, (const void *) srcp, 4);
+ *dstp = cpu_to_be32(dword);
+ srcp += 4;
+ dstp++;
+ }
+ if (sc->cmd_len & 0x3) {
+ dword = (u32) srcp[0] | ((u32) srcp[1] << 8);
+ *dstp = cpu_to_be32(dword);
+ }
+}
+
+static void bnx2i_cleanup_task(struct iscsi_task *task)
+{
+ struct iscsi_conn *conn = task->conn;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct bnx2i_hba *hba = bnx2i_conn->hba;
+
+ /*
+ * mgmt task or cmd was never sent to us to transmit.
+ */
+ if (!task->sc || task->state == ISCSI_TASK_PENDING)
+ return;
+ /*
+ * need to clean-up task context to claim dma buffers
+ */
+ if (task->state == ISCSI_TASK_ABRT_TMF) {
+ bnx2i_send_cmd_cleanup_req(hba, task->dd_data);
+
+ spin_unlock_bh(&conn->session->lock);
+ wait_for_completion_timeout(&bnx2i_conn->cmd_cleanup_cmpl,
+ msecs_to_jiffies(ISCSI_CMD_CLEANUP_TIMEOUT));
+ spin_lock_bh(&conn->session->lock);
+ }
+ bnx2i_iscsi_unmap_sg_list(task->dd_data);
+}
+
+/**
+ * bnx2i_mtask_xmit - transmit mtask to chip for further processing
+ * @conn: transport layer conn structure pointer
+ * @task: transport layer command structure pointer
+ */
+static int
+bnx2i_mtask_xmit(struct iscsi_conn *conn, struct iscsi_task *task)
+{
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct bnx2i_cmd *cmd = task->dd_data;
+
+ memset(bnx2i_conn->gen_pdu.req_buf, 0, ISCSI_DEF_MAX_RECV_SEG_LEN);
+
+ bnx2i_setup_cmd_wqe_template(cmd);
+ bnx2i_conn->gen_pdu.req_buf_size = task->data_count;
+ if (task->data_count) {
+ memcpy(bnx2i_conn->gen_pdu.req_buf, task->data,
+ task->data_count);
+ bnx2i_conn->gen_pdu.req_wr_ptr =
+ bnx2i_conn->gen_pdu.req_buf + task->data_count;
+ }
+ cmd->conn = conn->dd_data;
+ cmd->scsi_cmd = NULL;
+ return bnx2i_iscsi_send_generic_request(task);
+}
+
+/**
+ * bnx2i_task_xmit - transmit iscsi command to chip for further processing
+ * @task: transport layer command structure pointer
+ *
+ * maps SG buffers and send request to chip/firmware in the form of SQ WQE
+ */
+static int bnx2i_task_xmit(struct iscsi_task *task)
+{
+ struct iscsi_conn *conn = task->conn;
+ struct iscsi_session *session = conn->session;
+ struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct scsi_cmnd *sc = task->sc;
+ struct bnx2i_cmd *cmd = task->dd_data;
+ struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr;
+
+ if (test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state))
+ return -ENOTCONN;
+
+ if (!bnx2i_conn->is_bound)
+ return -ENOTCONN;
+
+ /*
+ * If there is no scsi_cmnd this must be a mgmt task
+ */
+ if (!sc)
+ return bnx2i_mtask_xmit(conn, task);
+
+ bnx2i_setup_cmd_wqe_template(cmd);
+ cmd->req.op_code = ISCSI_OP_SCSI_CMD;
+ cmd->conn = bnx2i_conn;
+ cmd->scsi_cmd = sc;
+ cmd->req.total_data_transfer_length = scsi_bufflen(sc);
+ cmd->req.cmd_sn = be32_to_cpu(hdr->cmdsn);
+
+ bnx2i_iscsi_map_sg_list(cmd);
+ bnx2i_cpy_scsi_cdb(sc, cmd);
+
+ cmd->req.op_attr = ISCSI_ATTR_SIMPLE;
+ if (sc->sc_data_direction == DMA_TO_DEVICE) {
+ cmd->req.op_attr |= ISCSI_CMD_REQUEST_WRITE;
+ cmd->req.itt = task->itt |
+ (ISCSI_TASK_TYPE_WRITE << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ bnx2i_setup_write_cmd_bd_info(task);
+ } else {
+ if (scsi_bufflen(sc))
+ cmd->req.op_attr |= ISCSI_CMD_REQUEST_READ;
+ cmd->req.itt = task->itt |
+ (ISCSI_TASK_TYPE_READ << ISCSI_CMD_REQUEST_TYPE_SHIFT);
+ }
+
+ cmd->req.num_bds = cmd->io_tbl.bd_valid;
+ if (!cmd->io_tbl.bd_valid) {
+ cmd->req.bd_list_addr_lo = (u32) hba->mp_bd_dma;
+ cmd->req.bd_list_addr_hi = (u32) ((u64) hba->mp_bd_dma >> 32);
+ cmd->req.num_bds = 1;
+ }
+
+ bnx2i_send_iscsi_scsicmd(bnx2i_conn, cmd);
+ return 0;
+}
+
+/**
+ * bnx2i_session_create - create a new iscsi session
+ * @cmds_max: max commands supported
+ * @qdepth: scsi queue depth to support
+ * @initial_cmdsn: initial iscsi CMDSN to be used for this session
+ *
+ * Creates a new iSCSI session instance on given device.
+ */
+static struct iscsi_cls_session *
+bnx2i_session_create(struct iscsi_endpoint *ep,
+ uint16_t cmds_max, uint16_t qdepth,
+ uint32_t initial_cmdsn)
+{
+ struct Scsi_Host *shost;
+ struct iscsi_cls_session *cls_session;
+ struct bnx2i_hba *hba;
+ struct bnx2i_endpoint *bnx2i_ep;
+
+ if (!ep) {
+ printk(KERN_ERR "bnx2i: missing ep.\n");
+ return NULL;
+ }
+
+ bnx2i_ep = ep->dd_data;
+ shost = bnx2i_ep->hba->shost;
+ hba = iscsi_host_priv(shost);
+ if (bnx2i_adapter_ready(hba))
+ return NULL;
+
+ /*
+ * user can override hw limit as long as it is within
+ * the min/max.
+ */
+ if (cmds_max > hba->max_sqes)
+ cmds_max = hba->max_sqes;
+ else if (cmds_max < BNX2I_SQ_WQES_MIN)
+ cmds_max = BNX2I_SQ_WQES_MIN;
+
+ cls_session = iscsi_session_setup(&bnx2i_iscsi_transport, shost,
+ cmds_max, sizeof(struct bnx2i_cmd),
+ initial_cmdsn, ISCSI_MAX_TARGET);
+ if (!cls_session)
+ return NULL;
+
+ if (bnx2i_setup_cmd_pool(hba, cls_session->dd_data))
+ goto session_teardown;
+ return cls_session;
+
+session_teardown:
+ iscsi_session_teardown(cls_session);
+ return NULL;
+}
+
+
+/**
+ * bnx2i_session_destroy - destroys iscsi session
+ * @cls_session: pointer to iscsi cls session
+ *
+ * Destroys previously created iSCSI session instance and releases
+ * all resources held by it
+ */
+static void bnx2i_session_destroy(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *session = cls_session->dd_data;
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+
+ bnx2i_destroy_cmd_pool(hba, session);
+ iscsi_session_teardown(cls_session);
+}
+
+
+/**
+ * bnx2i_conn_create - create iscsi connection instance
+ * @cls_session: pointer to iscsi cls session
+ * @cid: iscsi cid as per rfc (not NX2's CID terminology)
+ *
+ * Creates a new iSCSI connection instance for a given session
+ */
+static struct iscsi_cls_conn *
+bnx2i_conn_create(struct iscsi_cls_session *cls_session, uint32_t cid)
+{
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ struct bnx2i_conn *bnx2i_conn;
+ struct iscsi_cls_conn *cls_conn;
+ struct iscsi_conn *conn;
+
+ cls_conn = iscsi_conn_setup(cls_session, sizeof(*bnx2i_conn),
+ cid);
+ if (!cls_conn)
+ return NULL;
+ conn = cls_conn->dd_data;
+
+ bnx2i_conn = conn->dd_data;
+ bnx2i_conn->cls_conn = cls_conn;
+ bnx2i_conn->hba = hba;
+ /* 'ep' ptr will be assigned in bind() call */
+ bnx2i_conn->ep = NULL;
+ init_completion(&bnx2i_conn->cmd_cleanup_cmpl);
+
+ if (bnx2i_conn_alloc_login_resources(hba, bnx2i_conn)) {
+ iscsi_conn_printk(KERN_ALERT, conn,
+ "conn_new: login resc alloc failed!!\n");
+ goto free_conn;
+ }
+
+ return cls_conn;
+
+free_conn:
+ iscsi_conn_teardown(cls_conn);
+ return NULL;
+}
+
+/**
+ * bnx2i_conn_bind - binds iscsi sess, conn and ep objects together
+ * @cls_session: pointer to iscsi cls session
+ * @cls_conn: pointer to iscsi cls conn
+ * @transport_fd: 64-bit EP handle
+ * @is_leading: leading connection on this session?
+ *
+ * Binds together iSCSI session instance, iSCSI connection instance
+ * and the TCP connection. This routine returns error code if
+ * TCP connection does not belong on the device iSCSI sess/conn
+ * is bound
+ */
+static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
+ struct iscsi_cls_conn *cls_conn,
+ uint64_t transport_fd, int is_leading)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ struct bnx2i_endpoint *bnx2i_ep;
+ struct iscsi_endpoint *ep;
+ int ret_code;
+
+ ep = iscsi_lookup_endpoint(transport_fd);
+ if (!ep)
+ return -EINVAL;
+
+ bnx2i_ep = ep->dd_data;
+ if ((bnx2i_ep->state == EP_STATE_TCP_FIN_RCVD) ||
+ (bnx2i_ep->state == EP_STATE_TCP_RST_RCVD))
+ /* Peer disconnect via' FIN or RST */
+ return -EINVAL;
+
+ if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+ return -EINVAL;
+
+ if (bnx2i_ep->hba != hba) {
+ /* Error - TCP connection does not belong to this device
+ */
+ iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+ "conn bind, ep=0x%p (%s) does not",
+ bnx2i_ep, bnx2i_ep->hba->netdev->name);
+ iscsi_conn_printk(KERN_ALERT, cls_conn->dd_data,
+ "belong to hba (%s)\n",
+ hba->netdev->name);
+ return -EEXIST;
+ }
+
+ bnx2i_ep->conn = bnx2i_conn;
+ bnx2i_conn->ep = bnx2i_ep;
+ bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
+ bnx2i_conn->fw_cid = bnx2i_ep->ep_cid;
+ bnx2i_conn->is_bound = 1;
+
+ ret_code = bnx2i_bind_conn_to_iscsi_cid(hba, bnx2i_conn,
+ bnx2i_ep->ep_iscsi_cid);
+
+ /* 5706/5708/5709 FW takes RQ as full when initiated, but for 57710
+ * driver needs to explicitly replenish RQ index during setup.
+ */
+ if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+ bnx2i_put_rq_buf(bnx2i_conn, 0);
+
+ bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE);
+ return ret_code;
+}
+
+
+/**
+ * bnx2i_conn_destroy - destroy iscsi connection instance & release resources
+ * @cls_conn: pointer to iscsi cls conn
+ *
+ * Destroy an iSCSI connection instance and release memory resources held by
+ * this connection
+ */
+static void bnx2i_conn_destroy(struct iscsi_cls_conn *cls_conn)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ struct Scsi_Host *shost;
+ struct bnx2i_hba *hba;
+
+ shost = iscsi_session_to_shost(iscsi_conn_to_session(cls_conn));
+ hba = iscsi_host_priv(shost);
+
+ bnx2i_conn_free_login_resources(hba, bnx2i_conn);
+ iscsi_conn_teardown(cls_conn);
+}
+
+
+/**
+ * bnx2i_conn_get_param - return iscsi connection parameter to caller
+ * @cls_conn: pointer to iscsi cls conn
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ *
+ * returns iSCSI connection parameters
+ */
+static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, char *buf)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+ int len = 0;
+
+ switch (param) {
+ case ISCSI_PARAM_CONN_PORT:
+ if (bnx2i_conn->ep)
+ len = sprintf(buf, "%hu\n",
+ bnx2i_conn->ep->cm_sk->dst_port);
+ break;
+ case ISCSI_PARAM_CONN_ADDRESS:
+ if (bnx2i_conn->ep)
+ len = sprintf(buf, NIPQUAD_FMT "\n",
+ NIPQUAD(bnx2i_conn->ep->cm_sk->dst_ip));
+ break;
+ default:
+ return iscsi_conn_get_param(cls_conn, param, buf);
+ }
+
+ return len;
+}
+
+/**
+ * bnx2i_host_get_param - returns host (adapter) related parameters
+ * @shost: scsi host pointer
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ */
+static int bnx2i_host_get_param(struct Scsi_Host *shost,
+ enum iscsi_host_param param, char *buf)
+{
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ int len = 0;
+
+ switch (param) {
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ len = sysfs_format_mac(buf, hba->cnic->mac_addr, 6);
+ break;
+ case ISCSI_HOST_PARAM_NETDEV_NAME:
+ len = sprintf(buf, "%s\n", hba->netdev->name);
+ break;
+ default:
+ return iscsi_host_get_param(shost, param, buf);
+ }
+ return len;
+}
+
+/**
+ * bnx2i_conn_start - completes iscsi connection migration to FFP
+ * @cls_conn: pointer to iscsi cls conn
+ *
+ * last call in FFP migration to handover iscsi conn to the driver
+ */
+static int bnx2i_conn_start(struct iscsi_cls_conn *cls_conn)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct bnx2i_conn *bnx2i_conn = conn->dd_data;
+
+ bnx2i_conn->ep->state = EP_STATE_ULP_UPDATE_START;
+ bnx2i_update_iscsi_conn(conn);
+
+ /*
+ * this should normally not sleep for a long time so it should
+ * not disrupt the caller.
+ */
+ bnx2i_conn->ep->ofld_timer.expires = 1 * HZ + jiffies;
+ bnx2i_conn->ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ bnx2i_conn->ep->ofld_timer.data = (unsigned long) bnx2i_conn->ep;
+ add_timer(&bnx2i_conn->ep->ofld_timer);
+ /* update iSCSI context for this conn, wait for CNIC to complete */
+ wait_event_interruptible(bnx2i_conn->ep->ofld_wait,
+ bnx2i_conn->ep->state != EP_STATE_ULP_UPDATE_START);
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&bnx2i_conn->ep->ofld_timer);
+
+ iscsi_conn_start(cls_conn);
+ return 0;
+}
+
+
+/**
+ * bnx2i_conn_get_stats - returns iSCSI stats
+ * @cls_conn: pointer to iscsi cls conn
+ * @stats: pointer to iscsi statistic struct
+ */
+static void bnx2i_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+ struct iscsi_stats *stats)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+
+ stats->txdata_octets = conn->txdata_octets;
+ stats->rxdata_octets = conn->rxdata_octets;
+ stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
+ stats->dataout_pdus = conn->dataout_pdus_cnt;
+ stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
+ stats->datain_pdus = conn->datain_pdus_cnt;
+ stats->r2t_pdus = conn->r2t_pdus_cnt;
+ stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
+ stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
+ stats->custom_length = 3;
+ strcpy(stats->custom[2].desc, "eh_abort_cnt");
+ stats->custom[2].value = conn->eh_abort_cnt;
+ stats->digest_err = 0;
+ stats->timeout_err = 0;
+ stats->custom_length = 0;
+}
+
+
+/**
+ * bnx2i_check_route - checks if target IP route belongs to one of NX2 devices
+ * @dst_addr: target IP address
+ *
+ * check if route resolves to BNX2 device
+ */
+static struct bnx2i_hba *bnx2i_check_route(struct sockaddr *dst_addr)
+{
+ struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+ struct bnx2i_hba *hba;
+ struct cnic_dev *cnic = NULL;
+
+ bnx2i_reg_dev_all();
+
+ hba = get_adapter_list_head();
+ if (hba && hba->cnic)
+ cnic = hba->cnic->cm_select_dev(desti, CNIC_ULP_ISCSI);
+ if (!cnic) {
+ printk(KERN_ALERT "bnx2i: no route,"
+ "can't connect using cnic\n");
+ goto no_nx2_route;
+ }
+ hba = bnx2i_find_hba_for_cnic(cnic);
+ if (!hba)
+ goto no_nx2_route;
+
+ if (bnx2i_adapter_ready(hba)) {
+ printk(KERN_ALERT "bnx2i: check route, hba not found\n");
+ goto no_nx2_route;
+ }
+ if (hba->netdev->mtu > hba->mtu_supported) {
+ printk(KERN_ALERT "bnx2i: %s network i/f mtu is set to %d\n",
+ hba->netdev->name, hba->netdev->mtu);
+ printk(KERN_ALERT "bnx2i: iSCSI HBA can support mtu of %d\n",
+ hba->mtu_supported);
+ goto no_nx2_route;
+ }
+ return hba;
+no_nx2_route:
+ return NULL;
+}
+
+
+/**
+ * bnx2i_tear_down_conn - tear down iscsi/tcp connection and free resources
+ * @hba: pointer to adapter instance
+ * @ep: endpoint (transport indentifier) structure
+ *
+ * destroys cm_sock structure and on chip iscsi context
+ */
+static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
+ struct bnx2i_endpoint *ep)
+{
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+ hba->cnic->cm_destroy(ep->cm_sk);
+
+ if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
+ ep->state = EP_STATE_DISCONN_COMPL;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
+ ep->state == EP_STATE_DISCONN_TIMEDOUT) {
+ printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
+ " NW/PCIe trace, driver msgs to developers"
+ " for analysis\n");
+ return 1;
+ }
+
+ ep->state = EP_STATE_CLEANUP_START;
+ init_timer(&ep->ofld_timer);
+ ep->ofld_timer.expires = 10*HZ + jiffies;
+ ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ ep->ofld_timer.data = (unsigned long) ep;
+ add_timer(&ep->ofld_timer);
+
+ bnx2i_ep_destroy_list_add(hba, ep);
+
+ /* destroy iSCSI context, wait for it to complete */
+ bnx2i_send_conn_destroy(hba, ep);
+ wait_event_interruptible(ep->ofld_wait,
+ (ep->state != EP_STATE_CLEANUP_START));
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&ep->ofld_timer);
+
+ bnx2i_ep_destroy_list_del(hba, ep);
+
+ if (ep->state != EP_STATE_CLEANUP_CMPL)
+ /* should never happen */
+ printk(KERN_ALERT "bnx2i - conn destroy failed\n");
+
+ return 0;
+}
+
+
+/**
+ * bnx2i_ep_connect - establish TCP connection to target portal
+ * @shost: scsi host
+ * @dst_addr: target IP address
+ * @non_blocking: blocking or non-blocking call
+ *
+ * this routine initiates the TCP/IP connection by invoking Option-2 i/f
+ * with l5_core and the CNIC. This is a multi-step process of resolving
+ * route to target, create a iscsi connection context, handshaking with
+ * CNIC module to create/initialize the socket struct and finally
+ * sending down option-2 request to complete TCP 3-way handshake
+ */
+static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
+ struct sockaddr *dst_addr,
+ int non_blocking)
+{
+ u32 iscsi_cid = BNX2I_CID_RESERVED;
+ struct sockaddr_in *desti = (struct sockaddr_in *) dst_addr;
+ struct sockaddr_in6 *desti6;
+ struct bnx2i_endpoint *bnx2i_ep;
+ struct bnx2i_hba *hba;
+ struct cnic_dev *cnic;
+ struct cnic_sockaddr saddr;
+ struct iscsi_endpoint *ep;
+ int rc = 0;
+
+ if (shost)
+ /* driver is given scsi host to work with */
+ hba = iscsi_host_priv(shost);
+ else
+ /*
+ * check if the given destination can be reached through
+ * a iscsi capable NetXtreme2 device
+ */
+ hba = bnx2i_check_route(dst_addr);
+ if (!hba) {
+ rc = -ENOMEM;
+ goto check_busy;
+ }
+
+ cnic = hba->cnic;
+ ep = bnx2i_alloc_ep(hba);
+ if (!ep) {
+ rc = -ENOMEM;
+ goto check_busy;
+ }
+ bnx2i_ep = ep->dd_data;
+
+ mutex_lock(&hba->net_dev_lock);
+ if (bnx2i_adapter_ready(hba)) {
+ rc = -EPERM;
+ goto net_if_down;
+ }
+
+ bnx2i_ep->state = EP_STATE_IDLE;
+ bnx2i_ep->ep_iscsi_cid = (u16) -1;
+ bnx2i_ep->num_active_cmds = 0;
+ iscsi_cid = bnx2i_alloc_iscsi_cid(hba);
+ if (iscsi_cid == -1) {
+ printk(KERN_ALERT "alloc_ep: unable to allocate iscsi cid\n");
+ rc = -ENOMEM;
+ goto iscsi_cid_err;
+ }
+ bnx2i_ep->hba_age = hba->age;
+
+ rc = bnx2i_alloc_qp_resc(hba, bnx2i_ep);
+ if (rc != 0) {
+ printk(KERN_ALERT "bnx2i: ep_conn, alloc QP resc error\n");
+ rc = -ENOMEM;
+ goto qp_resc_err;
+ }
+
+ bnx2i_ep->ep_iscsi_cid = (u16)iscsi_cid;
+ bnx2i_ep->state = EP_STATE_OFLD_START;
+ bnx2i_ep_ofld_list_add(hba, bnx2i_ep);
+
+ init_timer(&bnx2i_ep->ofld_timer);
+ bnx2i_ep->ofld_timer.expires = 2 * HZ + jiffies;
+ bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+ add_timer(&bnx2i_ep->ofld_timer);
+
+ bnx2i_send_conn_ofld_req(hba, bnx2i_ep);
+
+ /* Wait for CNIC hardware to setup conn context and return 'cid' */
+ wait_event_interruptible(bnx2i_ep->ofld_wait,
+ bnx2i_ep->state != EP_STATE_OFLD_START);
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&bnx2i_ep->ofld_timer);
+
+ bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
+
+ if (bnx2i_ep->state != EP_STATE_OFLD_COMPL) {
+ rc = -ENOSPC;
+ goto conn_failed;
+ }
+
+ rc = cnic->cm_create(cnic, CNIC_ULP_ISCSI, bnx2i_ep->ep_cid,
+ iscsi_cid, &bnx2i_ep->cm_sk, bnx2i_ep);
+ if (rc) {
+ rc = -EINVAL;
+ goto conn_failed;
+ }
+
+ bnx2i_ep->cm_sk->rcv_buf = 256 * 1024;
+ bnx2i_ep->cm_sk->snd_buf = 256 * 1024;
+ clear_bit(SK_TCP_TIMESTAMP, &bnx2i_ep->cm_sk->tcp_flags);
+
+ memset(&saddr, 0, sizeof(saddr));
+ if (dst_addr->sa_family == AF_INET) {
+ desti = (struct sockaddr_in *) dst_addr;
+ saddr.remote.v4 = *desti;
+ saddr.local.v4.sin_family = desti->sin_family;
+ } else if (dst_addr->sa_family == AF_INET6) {
+ desti6 = (struct sockaddr_in6 *) dst_addr;
+ saddr.remote.v6 = *desti6;
+ saddr.local.v6.sin6_family = desti6->sin6_family;
+ }
+
+ bnx2i_ep->timestamp = jiffies;
+ bnx2i_ep->state = EP_STATE_CONNECT_START;
+ if (!test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ rc = -EINVAL;
+ goto conn_failed;
+ } else
+ rc = cnic->cm_connect(bnx2i_ep->cm_sk, &saddr);
+
+ if (rc)
+ goto release_ep;
+
+ if (bnx2i_map_ep_dbell_regs(bnx2i_ep))
+ goto release_ep;
+ mutex_unlock(&hba->net_dev_lock);
+ return ep;
+
+release_ep:
+ if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+ mutex_unlock(&hba->net_dev_lock);
+ return ERR_PTR(rc);
+ }
+conn_failed:
+net_if_down:
+iscsi_cid_err:
+ bnx2i_free_qp_resc(hba, bnx2i_ep);
+qp_resc_err:
+ bnx2i_free_ep(ep);
+ mutex_unlock(&hba->net_dev_lock);
+check_busy:
+ bnx2i_unreg_dev_all();
+ return ERR_PTR(rc);
+}
+
+
+/**
+ * bnx2i_ep_poll - polls for TCP connection establishement
+ * @ep: TCP connection (endpoint) handle
+ * @timeout_ms: timeout value in milli secs
+ *
+ * polls for TCP connect request to complete
+ */
+static int bnx2i_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+ struct bnx2i_endpoint *bnx2i_ep;
+ int rc = 0;
+
+ bnx2i_ep = ep->dd_data;
+ if ((bnx2i_ep->state == EP_STATE_IDLE) ||
+ (bnx2i_ep->state == EP_STATE_CONNECT_FAILED) ||
+ (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+ return -1;
+ if (bnx2i_ep->state == EP_STATE_CONNECT_COMPL)
+ return 1;
+
+ rc = wait_event_interruptible_timeout(bnx2i_ep->ofld_wait,
+ ((bnx2i_ep->state ==
+ EP_STATE_OFLD_FAILED) ||
+ (bnx2i_ep->state ==
+ EP_STATE_CONNECT_FAILED) ||
+ (bnx2i_ep->state ==
+ EP_STATE_CONNECT_COMPL)),
+ msecs_to_jiffies(timeout_ms));
+ if (!rc || (bnx2i_ep->state == EP_STATE_OFLD_FAILED))
+ rc = -1;
+
+ if (rc > 0)
+ return 1;
+ else if (!rc)
+ return 0; /* timeout */
+ else
+ return rc;
+}
+
+
+/**
+ * bnx2i_ep_tcp_conn_active - check EP state transition
+ * @ep: endpoint pointer
+ *
+ * check if underlying TCP connection is active
+ */
+static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
+{
+ int ret;
+ int cnic_dev_10g = 0;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &bnx2i_ep->hba->cnic_dev_type))
+ cnic_dev_10g = 1;
+
+ switch (bnx2i_ep->state) {
+ case EP_STATE_CONNECT_START:
+ case EP_STATE_CLEANUP_FAILED:
+ case EP_STATE_OFLD_FAILED:
+ case EP_STATE_DISCONN_TIMEDOUT:
+ ret = 0;
+ break;
+ case EP_STATE_CONNECT_COMPL:
+ case EP_STATE_ULP_UPDATE_START:
+ case EP_STATE_ULP_UPDATE_COMPL:
+ case EP_STATE_TCP_FIN_RCVD:
+ case EP_STATE_ULP_UPDATE_FAILED:
+ ret = 1;
+ break;
+ case EP_STATE_TCP_RST_RCVD:
+ ret = 0;
+ break;
+ case EP_STATE_CONNECT_FAILED:
+ if (cnic_dev_10g)
+ ret = 1;
+ else
+ ret = 0;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+
+/**
+ * bnx2i_ep_disconnect - executes TCP connection teardown process
+ * @ep: TCP connection (endpoint) handle
+ *
+ * executes TCP connection teardown process
+ */
+static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
+{
+ struct bnx2i_endpoint *bnx2i_ep;
+ struct bnx2i_conn *bnx2i_conn = NULL;
+ struct iscsi_session *session = NULL;
+ struct iscsi_conn *conn;
+ struct cnic_dev *cnic;
+ struct bnx2i_hba *hba;
+
+ bnx2i_ep = ep->dd_data;
+
+ /* driver should not attempt connection cleanup untill TCP_CONNECT
+ * completes either successfully or fails. Timeout is 9-secs, so
+ * wait for it to complete
+ */
+ while ((bnx2i_ep->state == EP_STATE_CONNECT_START) &&
+ !time_after(jiffies, bnx2i_ep->timestamp + (12 * HZ)))
+ msleep(250);
+
+ if (bnx2i_ep->conn) {
+ bnx2i_conn = bnx2i_ep->conn;
+ conn = bnx2i_conn->cls_conn->dd_data;
+ session = conn->session;
+
+ spin_lock_bh(&session->lock);
+ bnx2i_conn->is_bound = 0;
+ spin_unlock_bh(&session->lock);
+ }
+
+ hba = bnx2i_ep->hba;
+ if (bnx2i_ep->state == EP_STATE_IDLE)
+ goto return_bnx2i_ep;
+ cnic = hba->cnic;
+
+ mutex_lock(&hba->net_dev_lock);
+
+ if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+ goto free_resc;
+ if (bnx2i_ep->hba_age != hba->age)
+ goto free_resc;
+
+ if (!bnx2i_ep_tcp_conn_active(bnx2i_ep))
+ goto destory_conn;
+
+ bnx2i_ep->state = EP_STATE_DISCONN_START;
+
+ init_timer(&bnx2i_ep->ofld_timer);
+ bnx2i_ep->ofld_timer.expires = 10*HZ + jiffies;
+ bnx2i_ep->ofld_timer.function = bnx2i_ep_ofld_timer;
+ bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
+ add_timer(&bnx2i_ep->ofld_timer);
+
+ if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+ int close = 0;
+
+ if (session) {
+ spin_lock_bh(&session->lock);
+ if (session->state == ISCSI_STATE_LOGGING_OUT)
+ close = 1;
+ spin_unlock_bh(&session->lock);
+ }
+ if (close)
+ cnic->cm_close(bnx2i_ep->cm_sk);
+ else
+ cnic->cm_abort(bnx2i_ep->cm_sk);
+ } else
+ goto free_resc;
+
+ /* wait for option-2 conn teardown */
+ wait_event_interruptible(bnx2i_ep->ofld_wait,
+ bnx2i_ep->state != EP_STATE_DISCONN_START);
+
+ if (signal_pending(current))
+ flush_signals(current);
+ del_timer_sync(&bnx2i_ep->ofld_timer);
+
+destory_conn:
+ if (bnx2i_tear_down_conn(hba, bnx2i_ep)) {
+ mutex_unlock(&hba->net_dev_lock);
+ return;
+ }
+free_resc:
+ mutex_unlock(&hba->net_dev_lock);
+ bnx2i_free_qp_resc(hba, bnx2i_ep);
+return_bnx2i_ep:
+ if (bnx2i_conn)
+ bnx2i_conn->ep = NULL;
+
+ bnx2i_free_ep(ep);
+
+ if (!hba->ofld_conns_active)
+ bnx2i_unreg_dev_all();
+}
+
+
+/**
+ * bnx2i_nl_set_path - ISCSI_UEVENT_PATH_UPDATE user message handler
+ * @buf: pointer to buffer containing iscsi path message
+ *
+ */
+static int bnx2i_nl_set_path(struct Scsi_Host *shost, struct iscsi_path *params)
+{
+ struct bnx2i_hba *hba = iscsi_host_priv(shost);
+ char *buf = (char *) params;
+ u16 len = sizeof(*params);
+
+ /* handled by cnic driver */
+ hba->cnic->iscsi_nl_msg_recv(hba->cnic, ISCSI_UEVENT_PATH_UPDATE, buf,
+ len);
+
+ return 0;
+}
+
+
+/*
+ * 'Scsi_Host_Template' structure and 'iscsi_tranport' structure template
+ * used while registering with the scsi host and iSCSI transport module.
+ */
+static struct scsi_host_template bnx2i_host_template = {
+ .module = THIS_MODULE,
+ .name = "Broadcom Offload iSCSI Initiator",
+ .proc_name = "bnx2i",
+ .queuecommand = iscsi_queuecommand,
+ .eh_abort_handler = iscsi_eh_abort,
+ .eh_device_reset_handler = iscsi_eh_device_reset,
+ .eh_target_reset_handler = iscsi_eh_target_reset,
+ .can_queue = 1024,
+ .max_sectors = 127,
+ .cmd_per_lun = 32,
+ .this_id = -1,
+ .use_clustering = ENABLE_CLUSTERING,
+ .sg_tablesize = ISCSI_MAX_BDS_PER_CMD,
+ .shost_attrs = bnx2i_dev_attributes,
+};
+
+struct iscsi_transport bnx2i_iscsi_transport = {
+ .owner = THIS_MODULE,
+ .name = "bnx2i",
+ .caps = CAP_RECOVERY_L0 | CAP_HDRDGST |
+ CAP_MULTI_R2T | CAP_DATADGST |
+ CAP_DATA_PATH_OFFLOAD,
+ .param_mask = ISCSI_MAX_RECV_DLENGTH |
+ ISCSI_MAX_XMIT_DLENGTH |
+ ISCSI_HDRDGST_EN |
+ ISCSI_DATADGST_EN |
+ ISCSI_INITIAL_R2T_EN |
+ ISCSI_MAX_R2T |
+ ISCSI_IMM_DATA_EN |
+ ISCSI_FIRST_BURST |
+ ISCSI_MAX_BURST |
+ ISCSI_PDU_INORDER_EN |
+ ISCSI_DATASEQ_INORDER_EN |
+ ISCSI_ERL |
+ ISCSI_CONN_PORT |
+ ISCSI_CONN_ADDRESS |
+ ISCSI_EXP_STATSN |
+ ISCSI_PERSISTENT_PORT |
+ ISCSI_PERSISTENT_ADDRESS |
+ ISCSI_TARGET_NAME | ISCSI_TPGT |
+ ISCSI_USERNAME | ISCSI_PASSWORD |
+ ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
+ ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+ ISCSI_LU_RESET_TMO |
+ ISCSI_PING_TMO | ISCSI_RECV_TMO |
+ ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
+ .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_NETDEV_NAME,
+ .create_session = bnx2i_session_create,
+ .destroy_session = bnx2i_session_destroy,
+ .create_conn = bnx2i_conn_create,
+ .bind_conn = bnx2i_conn_bind,
+ .destroy_conn = bnx2i_conn_destroy,
+ .set_param = iscsi_set_param,
+ .get_conn_param = bnx2i_conn_get_param,
+ .get_session_param = iscsi_session_get_param,
+ .get_host_param = bnx2i_host_get_param,
+ .start_conn = bnx2i_conn_start,
+ .stop_conn = iscsi_conn_stop,
+ .send_pdu = iscsi_conn_send_pdu,
+ .xmit_task = bnx2i_task_xmit,
+ .get_stats = bnx2i_conn_get_stats,
+ /* TCP connect - disconnect - option-2 interface calls */
+ .ep_connect = bnx2i_ep_connect,
+ .ep_poll = bnx2i_ep_poll,
+ .ep_disconnect = bnx2i_ep_disconnect,
+ .set_path = bnx2i_nl_set_path,
+ /* Error recovery timeout call */
+ .session_recovery_timedout = iscsi_session_recovery_timedout,
+ .cleanup_task = bnx2i_cleanup_task,
+};
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
new file mode 100644
index 0000000..96426b7
--- /dev/null
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -0,0 +1,142 @@
+/* bnx2i_sysfs.c: Broadcom NetXtreme II iSCSI driver.
+ *
+ * Copyright (c) 2004 - 2009 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ *
+ * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ */
+
+#include "bnx2i.h"
+
+/**
+ * bnx2i_dev_to_hba - maps dev pointer to adapter struct
+ * @dev: device pointer
+ *
+ * Map device to hba structure
+ */
+static inline struct bnx2i_hba *bnx2i_dev_to_hba(struct device *dev)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ return iscsi_host_priv(shost);
+}
+
+
+/**
+ * bnx2i_show_sq_info - return(s currently configured send queue (SQ) size
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ *
+ * Returns current SQ size parameter, this paramater determines the number
+ * outstanding iSCSI commands supported on a connection
+ */
+static ssize_t bnx2i_show_sq_info(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+ return sprintf(buf, "0x%x\n", hba->max_sqes);
+}
+
+
+/**
+ * bnx2i_set_sq_info - update send queue (SQ) size parameter
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ * @count: parameter buffer size
+ *
+ * Interface for user to change shared queue size allocated for each conn
+ * Must be within SQ limits and a power of 2. For the latter this is needed
+ * because of how libiscsi preallocates tasks.
+ */
+static ssize_t bnx2i_set_sq_info(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+ u32 val;
+ int max_sq_size;
+
+ if (hba->ofld_conns_active)
+ goto skip_config;
+
+ if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
+ max_sq_size = BNX2I_5770X_SQ_WQES_MAX;
+ else
+ max_sq_size = BNX2I_570X_SQ_WQES_MAX;
+
+ if (sscanf(buf, " 0x%x ", &val) > 0) {
+ if ((val >= BNX2I_SQ_WQES_MIN) && (val <= max_sq_size) &&
+ (is_power_of_2(val)))
+ hba->max_sqes = val;
+ }
+
+ return count;
+
+skip_config:
+ printk(KERN_ERR "bnx2i: device busy, cannot change SQ size\n");
+ return 0;
+}
+
+
+/**
+ * bnx2i_show_ccell_info - returns command cell (HQ) size
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ *
+ * returns per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_show_ccell_info(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+ return sprintf(buf, "0x%x\n", hba->num_ccell);
+}
+
+
+/**
+ * bnx2i_get_link_state - set command cell (HQ) size
+ * @dev: device pointer
+ * @buf: buffer to return current SQ size parameter
+ * @count: parameter buffer size
+ *
+ * updates per-connection TCP history queue size parameter
+ */
+static ssize_t bnx2i_set_ccell_info(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ u32 val;
+ struct bnx2i_hba *hba = bnx2i_dev_to_hba(dev);
+
+ if (hba->ofld_conns_active)
+ goto skip_config;
+
+ if (sscanf(buf, " 0x%x ", &val) > 0) {
+ if ((val >= BNX2I_CCELLS_MIN) &&
+ (val <= BNX2I_CCELLS_MAX)) {
+ hba->num_ccell = val;
+ }
+ }
+
+ return count;
+
+skip_config:
+ printk(KERN_ERR "bnx2i: device busy, cannot change CCELL size\n");
+ return 0;
+}
+
+
+static DEVICE_ATTR(sq_size, S_IRUGO | S_IWUSR,
+ bnx2i_show_sq_info, bnx2i_set_sq_info);
+static DEVICE_ATTR(num_ccell, S_IRUGO | S_IWUSR,
+ bnx2i_show_ccell_info, bnx2i_set_ccell_info);
+
+struct device_attribute *bnx2i_dev_attributes[] = {
+ &dev_attr_sq_size,
+ &dev_attr_num_ccell,
+ NULL
+};
diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h
index 59b0958..e3133b5 100644
--- a/drivers/scsi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgb3i/cxgb3i.h
@@ -144,7 +144,6 @@
void cxgb3i_adapter_open(struct t3cdev *);
void cxgb3i_adapter_close(struct t3cdev *);
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *);
struct cxgb3i_hba *cxgb3i_hba_host_add(struct cxgb3i_adapter *,
struct net_device *);
void cxgb3i_hba_host_remove(struct cxgb3i_hba *);
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index 9212400..74369a3 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -13,6 +13,7 @@
#include <linux/inet.h>
#include <linux/crypto.h>
+#include <net/dst.h>
#include <net/tcp.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
@@ -178,7 +179,7 @@
* cxgb3i_hba_find_by_netdev - find the cxgb3i_hba structure via net_device
* @t3dev: t3cdev adapter
*/
-struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
+static struct cxgb3i_hba *cxgb3i_hba_find_by_netdev(struct net_device *ndev)
{
struct cxgb3i_adapter *snic;
int i;
@@ -261,20 +262,27 @@
/**
* cxgb3i_ep_connect - establish TCP connection to target portal
+ * @shost: scsi host to use
* @dst_addr: target IP address
* @non_blocking: blocking or non-blocking call
*
* Initiates a TCP/IP connection to the dst_addr
*/
-static struct iscsi_endpoint *cxgb3i_ep_connect(struct sockaddr *dst_addr,
+static struct iscsi_endpoint *cxgb3i_ep_connect(struct Scsi_Host *shost,
+ struct sockaddr *dst_addr,
int non_blocking)
{
struct iscsi_endpoint *ep;
struct cxgb3i_endpoint *cep;
- struct cxgb3i_hba *hba;
+ struct cxgb3i_hba *hba = NULL;
struct s3_conn *c3cn = NULL;
int err = 0;
+ if (shost)
+ hba = iscsi_host_priv(shost);
+
+ cxgb3i_api_debug("shost 0x%p, hba 0x%p.\n", shost, hba);
+
c3cn = cxgb3i_c3cn_create();
if (!c3cn) {
cxgb3i_log_info("ep connect OOM.\n");
@@ -282,17 +290,27 @@
goto release_conn;
}
- err = cxgb3i_c3cn_connect(c3cn, (struct sockaddr_in *)dst_addr);
+ err = cxgb3i_c3cn_connect(hba ? hba->ndev : NULL, c3cn,
+ (struct sockaddr_in *)dst_addr);
if (err < 0) {
cxgb3i_log_info("ep connect failed.\n");
goto release_conn;
}
+
hba = cxgb3i_hba_find_by_netdev(c3cn->dst_cache->dev);
if (!hba) {
err = -ENOSPC;
cxgb3i_log_info("NOT going through cxgbi device.\n");
goto release_conn;
}
+
+ if (shost && hba != iscsi_host_priv(shost)) {
+ err = -ENOSPC;
+ cxgb3i_log_info("Could not connect through request host%u\n",
+ shost->host_no);
+ goto release_conn;
+ }
+
if (c3cn_is_closing(c3cn)) {
err = -ENOSPC;
cxgb3i_log_info("ep connect unable to connect.\n");
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index e11c9c1..c1d5be4 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1479,12 +1479,13 @@
return NULL;
}
-static struct rtable *find_route(__be32 saddr, __be32 daddr,
+static struct rtable *find_route(struct net_device *dev,
+ __be32 saddr, __be32 daddr,
__be16 sport, __be16 dport)
{
struct rtable *rt;
struct flowi fl = {
- .oif = 0,
+ .oif = dev ? dev->ifindex : 0,
.nl_u = {
.ip4_u = {
.daddr = daddr,
@@ -1573,36 +1574,40 @@
*
* return 0 if active open request is sent, < 0 otherwise.
*/
-int cxgb3i_c3cn_connect(struct s3_conn *c3cn, struct sockaddr_in *usin)
+int cxgb3i_c3cn_connect(struct net_device *dev, struct s3_conn *c3cn,
+ struct sockaddr_in *usin)
{
struct rtable *rt;
- struct net_device *dev;
struct cxgb3i_sdev_data *cdata;
struct t3cdev *cdev;
__be32 sipv4;
int err;
+ c3cn_conn_debug("c3cn 0x%p, dev 0x%p.\n", c3cn, dev);
+
if (usin->sin_family != AF_INET)
return -EAFNOSUPPORT;
c3cn->daddr.sin_port = usin->sin_port;
c3cn->daddr.sin_addr.s_addr = usin->sin_addr.s_addr;
- rt = find_route(c3cn->saddr.sin_addr.s_addr,
+ rt = find_route(dev, c3cn->saddr.sin_addr.s_addr,
c3cn->daddr.sin_addr.s_addr,
c3cn->saddr.sin_port,
c3cn->daddr.sin_port);
if (rt == NULL) {
- c3cn_conn_debug("NO route to 0x%x, port %u.\n",
+ c3cn_conn_debug("NO route to 0x%x, port %u, dev %s.\n",
c3cn->daddr.sin_addr.s_addr,
- ntohs(c3cn->daddr.sin_port));
+ ntohs(c3cn->daddr.sin_port),
+ dev ? dev->name : "any");
return -ENETUNREACH;
}
if (rt->rt_flags & (RTCF_MULTICAST | RTCF_BROADCAST)) {
- c3cn_conn_debug("multi-cast route to 0x%x, port %u.\n",
+ c3cn_conn_debug("multi-cast route to 0x%x, port %u, dev %s.\n",
c3cn->daddr.sin_addr.s_addr,
- ntohs(c3cn->daddr.sin_port));
+ ntohs(c3cn->daddr.sin_port),
+ dev ? dev->name : "any");
ip_rt_put(rt);
return -ENETUNREACH;
}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.h b/drivers/scsi/cxgb3i/cxgb3i_offload.h
index ebfca96..6a1d86b 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.h
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.h
@@ -169,7 +169,8 @@
void cxgb3i_sdev_remove(struct t3cdev *);
struct s3_conn *cxgb3i_c3cn_create(void);
-int cxgb3i_c3cn_connect(struct s3_conn *, struct sockaddr_in *);
+int cxgb3i_c3cn_connect(struct net_device *, struct s3_conn *,
+ struct sockaddr_in *);
void cxgb3i_c3cn_rx_credits(struct s3_conn *, int);
int cxgb3i_c3cn_send_pdus(struct s3_conn *, struct sk_buff *);
void cxgb3i_c3cn_release(struct s3_conn *);
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 43b8c51..fd0544f 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -561,6 +561,12 @@
struct rdac_dh_data *h = get_rdac_data(sdev);
switch (sense_hdr->sense_key) {
case NOT_READY:
+ if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x01)
+ /* LUN Not Ready - Logical Unit Not Ready and is in
+ * the process of becoming ready
+ * Just retry.
+ */
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x81)
/* LUN Not Ready - Storage firmware incompatible
* Manual code synchonisation required.
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 03e1926..e606b48 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -54,7 +54,6 @@
/* fcoe host list */
LIST_HEAD(fcoe_hostlist);
DEFINE_RWLOCK(fcoe_hostlist_lock);
-DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
/* Function Prototypes */
@@ -71,7 +70,7 @@
static int fcoe_hostlist_add(const struct fc_lport *);
static int fcoe_hostlist_remove(const struct fc_lport *);
-static int fcoe_check_wait_queue(struct fc_lport *);
+static void fcoe_check_wait_queue(struct fc_lport *, struct sk_buff *);
static int fcoe_device_notification(struct notifier_block *, ulong, void *);
static void fcoe_dev_setup(void);
static void fcoe_dev_cleanup(void);
@@ -146,6 +145,7 @@
lp->link_up = 0;
lp->qfull = 0;
lp->max_retry_count = 3;
+ lp->max_rport_retry_count = 3;
lp->e_d_tov = 2 * 1000; /* FC-FS default */
lp->r_a_tov = 2 * 2 * 1000;
lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
@@ -167,6 +167,18 @@
}
/**
+ * fcoe_queue_timer() - fcoe queue timer
+ * @lp: the fc_lport pointer
+ *
+ * Calls fcoe_check_wait_queue on timeout
+ *
+ */
+static void fcoe_queue_timer(ulong lp)
+{
+ fcoe_check_wait_queue((struct fc_lport *)lp, NULL);
+}
+
+/**
* fcoe_netdev_config() - Set up netdev for SW FCoE
* @lp : ptr to the fc_lport
* @netdev : ptr to the associated netdevice struct
@@ -236,6 +248,7 @@
}
skb_queue_head_init(&fc->fcoe_pending_queue);
fc->fcoe_pending_queue_active = 0;
+ setup_timer(&fc->timer, fcoe_queue_timer, (unsigned long)lp);
/* setup Source Mac Address */
memcpy(fc->ctlr.ctl_src_addr, fc->real_dev->dev_addr,
@@ -386,6 +399,9 @@
/* Free existing skbs */
fcoe_clean_pending_queue(lp);
+ /* Stop the timer */
+ del_timer_sync(&fc->timer);
+
/* Free memory used by statistical counters */
fc_lport_free_stats(lp);
@@ -988,7 +1004,7 @@
*/
int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
{
- int wlen, rc = 0;
+ int wlen;
u32 crc;
struct ethhdr *eh;
struct fcoe_crc_eof *cp;
@@ -1021,8 +1037,7 @@
sof = fr_sof(fp);
eof = fr_eof(fp);
- elen = (fc->real_dev->priv_flags & IFF_802_1Q_VLAN) ?
- sizeof(struct vlan_ethhdr) : sizeof(struct ethhdr);
+ elen = sizeof(struct ethhdr);
hlen = sizeof(struct fcoe_hdr);
tlen = sizeof(struct fcoe_crc_eof);
wlen = (skb->len - tlen + sizeof(crc)) / FCOE_WORD_TO_BYTE;
@@ -1107,18 +1122,9 @@
/* send down to lld */
fr_dev(fp) = lp;
if (fc->fcoe_pending_queue.qlen)
- rc = fcoe_check_wait_queue(lp);
-
- if (rc == 0)
- rc = fcoe_start_io(skb);
-
- if (rc) {
- spin_lock_bh(&fc->fcoe_pending_queue.lock);
- __skb_queue_tail(&fc->fcoe_pending_queue, skb);
- spin_unlock_bh(&fc->fcoe_pending_queue.lock);
- if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
- lp->qfull = 1;
- }
+ fcoe_check_wait_queue(lp, skb);
+ else if (fcoe_start_io(skb))
+ fcoe_check_wait_queue(lp, skb);
return 0;
}
@@ -1268,32 +1274,6 @@
}
/**
- * fcoe_watchdog() - fcoe timer callback
- * @vp:
- *
- * This checks the pending queue length for fcoe and set lport qfull
- * if the FCOE_MAX_QUEUE_DEPTH is reached. This is done for all fc_lport on the
- * fcoe_hostlist.
- *
- * Returns: 0 for success
- */
-void fcoe_watchdog(ulong vp)
-{
- struct fcoe_softc *fc;
-
- read_lock(&fcoe_hostlist_lock);
- list_for_each_entry(fc, &fcoe_hostlist, list) {
- if (fc->ctlr.lp)
- fcoe_check_wait_queue(fc->ctlr.lp);
- }
- read_unlock(&fcoe_hostlist_lock);
-
- fcoe_timer.expires = jiffies + (1 * HZ);
- add_timer(&fcoe_timer);
-}
-
-
-/**
* fcoe_check_wait_queue() - attempt to clear the transmit backlog
* @lp: the fc_lport
*
@@ -1305,16 +1285,17 @@
* The wait_queue is used when the skb transmit fails. skb will go
* in the wait_queue which will be emptied by the timer function or
* by the next skb transmit.
- *
- * Returns: 0 for success
*/
-static int fcoe_check_wait_queue(struct fc_lport *lp)
+static void fcoe_check_wait_queue(struct fc_lport *lp, struct sk_buff *skb)
{
struct fcoe_softc *fc = lport_priv(lp);
- struct sk_buff *skb;
- int rc = -1;
+ int rc;
spin_lock_bh(&fc->fcoe_pending_queue.lock);
+
+ if (skb)
+ __skb_queue_tail(&fc->fcoe_pending_queue, skb);
+
if (fc->fcoe_pending_queue_active)
goto out;
fc->fcoe_pending_queue_active = 1;
@@ -1340,23 +1321,26 @@
if (fc->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
lp->qfull = 0;
+ if (fc->fcoe_pending_queue.qlen && !timer_pending(&fc->timer))
+ mod_timer(&fc->timer, jiffies + 2);
fc->fcoe_pending_queue_active = 0;
- rc = fc->fcoe_pending_queue.qlen;
out:
+ if (fc->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
+ lp->qfull = 1;
spin_unlock_bh(&fc->fcoe_pending_queue.lock);
- return rc;
+ return;
}
/**
* fcoe_dev_setup() - setup link change notification interface
*/
-static void fcoe_dev_setup()
+static void fcoe_dev_setup(void)
{
register_netdevice_notifier(&fcoe_notifier);
}
/**
- * fcoe_dev_setup() - cleanup link change notification interface
+ * fcoe_dev_cleanup() - cleanup link change notification interface
*/
static void fcoe_dev_cleanup(void)
{
@@ -1815,10 +1799,6 @@
/* Setup link change notification */
fcoe_dev_setup();
- setup_timer(&fcoe_timer, fcoe_watchdog, 0);
-
- mod_timer(&fcoe_timer, jiffies + (10 * HZ));
-
fcoe_if_init();
return 0;
@@ -1844,9 +1824,6 @@
fcoe_dev_cleanup();
- /* Stop the timer */
- del_timer_sync(&fcoe_timer);
-
/* releases the associated fcoe hosts */
list_for_each_entry_safe(fc, tmp, &fcoe_hostlist, list)
fcoe_if_destroy(fc->real_dev);
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index 917aae8..a1eb8c1 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -61,6 +61,7 @@
struct packet_type fip_packet_type;
struct sk_buff_head fcoe_pending_queue;
u8 fcoe_pending_queue_active;
+ struct timer_list timer; /* queue timer */
struct fcoe_ctlr ctlr;
};
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index 62ba0f3..9294118 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -213,7 +213,7 @@
sol->desc.size.fd_size = htons(fcoe_size);
skb_put(skb, sizeof(*sol));
- skb->protocol = htons(ETH_P_802_3);
+ skb->protocol = htons(ETH_P_FIP);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
fip->send(fip, skb);
@@ -365,7 +365,7 @@
}
skb_put(skb, len);
- skb->protocol = htons(ETH_P_802_3);
+ skb->protocol = htons(ETH_P_FIP);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
fip->send(fip, skb);
@@ -424,7 +424,7 @@
if (dtype != ELS_FLOGI)
memcpy(mac->fd_mac, fip->data_src_addr, ETH_ALEN);
- skb->protocol = htons(ETH_P_802_3);
+ skb->protocol = htons(ETH_P_FIP);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
return 0;
@@ -447,14 +447,10 @@
u16 old_xid;
u8 op;
- if (fip->state == FIP_ST_NON_FIP)
- return 0;
-
fh = (struct fc_frame_header *)skb->data;
op = *(u8 *)(fh + 1);
- switch (op) {
- case ELS_FLOGI:
+ if (op == ELS_FLOGI) {
old_xid = fip->flogi_oxid;
fip->flogi_oxid = ntohs(fh->fh_ox_id);
if (fip->state == FIP_ST_AUTO) {
@@ -466,6 +462,15 @@
fip->map_dest = 1;
return 0;
}
+ if (fip->state == FIP_ST_NON_FIP)
+ fip->map_dest = 1;
+ }
+
+ if (fip->state == FIP_ST_NON_FIP)
+ return 0;
+
+ switch (op) {
+ case ELS_FLOGI:
op = FIP_DT_FLOGI;
break;
case ELS_FDISC:
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 32ef6b8..a840728 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -680,6 +680,7 @@
}
lp->max_retry_count = fnic->config.flogi_retries;
+ lp->max_rport_retry_count = fnic->config.plogi_retries;
lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
FCP_SPPF_CONF_COMPL);
if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR)
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 59349a3..1258da3 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -152,6 +152,7 @@
struct Scsi_Host *host, gdth_ha_str *ha)
{
int size = 0,len = 0;
+ int hlen;
off_t begin = 0,pos = 0;
int id, i, j, k, sec, flag;
int no_mdrv = 0, drv_no, is_mirr;
@@ -192,11 +193,11 @@
if (reserve_list[0] == 0xff)
strcpy(hrec, "--");
else {
- sprintf(hrec, "%d", reserve_list[0]);
+ hlen = sprintf(hrec, "%d", reserve_list[0]);
for (i = 1; i < MAX_RES_ARGS; i++) {
if (reserve_list[i] == 0xff)
break;
- sprintf(hrec,"%s,%d", hrec, reserve_list[i]);
+ hlen += snprintf(hrec + hlen , 161 - hlen, ",%d", reserve_list[i]);
}
}
size = sprintf(buffer+len,
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ea4abee..b4b805e 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -110,7 +110,7 @@
{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_DEAD, DID_ERROR, 0, 1, "transport dead" },
{ IBMVFC_FABRIC_MAPPED, IBMVFC_CONFIG_ERROR, DID_ERROR, 1, 1, "configuration error" },
{ IBMVFC_FABRIC_MAPPED, IBMVFC_NAME_SERVER_FAIL, DID_ERROR, 1, 1, "name server failure" },
- { IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 0, 0, "link halted" },
+ { IBMVFC_FABRIC_MAPPED, IBMVFC_LINK_HALTED, DID_REQUEUE, 1, 0, "link halted" },
{ IBMVFC_FABRIC_MAPPED, IBMVFC_XPORT_GENERAL, DID_OK, 1, 0, "general transport error" },
{ IBMVFC_VIOS_FAILURE, IBMVFC_CRQ_FAILURE, DID_REQUEUE, 1, 1, "CRQ failure" },
@@ -143,6 +143,7 @@
static void ibmvfc_tgt_send_prli(struct ibmvfc_target *);
static void ibmvfc_tgt_send_plogi(struct ibmvfc_target *);
static void ibmvfc_tgt_query_target(struct ibmvfc_target *);
+static void ibmvfc_npiv_logout(struct ibmvfc_host *);
static const char *unknown_error = "unknown error";
@@ -275,7 +276,7 @@
int fc_rsp_len = rsp->fcp_rsp_len;
if ((rsp->flags & FCP_RSP_LEN_VALID) &&
- ((!fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
+ ((fc_rsp_len && fc_rsp_len != 4 && fc_rsp_len != 8) ||
rsp->data.info.rsp_code))
return DID_ERROR << 16;
@@ -431,6 +432,8 @@
case IBMVFC_TGT_ACTION_DEL_RPORT:
break;
default:
+ if (action == IBMVFC_TGT_ACTION_DEL_RPORT)
+ tgt->add_rport = 0;
tgt->action = action;
break;
}
@@ -475,6 +478,10 @@
if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT)
vhost->action = action;
break;
+ case IBMVFC_HOST_ACTION_LOGO_WAIT:
+ if (vhost->action == IBMVFC_HOST_ACTION_LOGO)
+ vhost->action = action;
+ break;
case IBMVFC_HOST_ACTION_INIT_WAIT:
if (vhost->action == IBMVFC_HOST_ACTION_INIT)
vhost->action = action;
@@ -483,7 +490,7 @@
switch (vhost->action) {
case IBMVFC_HOST_ACTION_INIT_WAIT:
case IBMVFC_HOST_ACTION_NONE:
- case IBMVFC_HOST_ACTION_TGT_ADD:
+ case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
vhost->action = action;
break;
default:
@@ -494,11 +501,11 @@
if (vhost->action == IBMVFC_HOST_ACTION_ALLOC_TGTS)
vhost->action = action;
break;
+ case IBMVFC_HOST_ACTION_LOGO:
case IBMVFC_HOST_ACTION_INIT:
case IBMVFC_HOST_ACTION_TGT_DEL:
case IBMVFC_HOST_ACTION_QUERY_TGTS:
case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
- case IBMVFC_HOST_ACTION_TGT_ADD:
case IBMVFC_HOST_ACTION_NONE:
default:
vhost->action = action;
@@ -576,7 +583,7 @@
}
list_for_each_entry(tgt, &vhost->targets, queue)
- tgt->need_login = 1;
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
scsi_block_requests(vhost->host);
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
vhost->job_step = ibmvfc_npiv_login;
@@ -646,6 +653,7 @@
} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
vhost->state = IBMVFC_NO_CRQ;
+ vhost->logged_in = 0;
dma_unmap_single(vhost->dev, crq->msg_token, PAGE_SIZE, DMA_BIDIRECTIONAL);
free_page((unsigned long)crq->msgs);
}
@@ -692,6 +700,7 @@
} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
vhost->state = IBMVFC_NO_CRQ;
+ vhost->logged_in = 0;
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
/* Clean out the queue */
@@ -807,10 +816,10 @@
}
/**
- * __ibmvfc_reset_host - Reset the connection to the server (no locking)
+ * ibmvfc_hard_reset_host - Reset the connection to the server by breaking the CRQ
* @vhost: struct ibmvfc host to reset
**/
-static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+static void ibmvfc_hard_reset_host(struct ibmvfc_host *vhost)
{
int rc;
@@ -826,9 +835,25 @@
}
/**
- * ibmvfc_reset_host - Reset the connection to the server
+ * __ibmvfc_reset_host - Reset the connection to the server (no locking)
* @vhost: struct ibmvfc host to reset
**/
+static void __ibmvfc_reset_host(struct ibmvfc_host *vhost)
+{
+ if (vhost->logged_in && vhost->action != IBMVFC_HOST_ACTION_LOGO_WAIT &&
+ !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+ scsi_block_requests(vhost->host);
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO);
+ vhost->job_step = ibmvfc_npiv_logout;
+ wake_up(&vhost->work_wait_q);
+ } else
+ ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_reset_host - Reset the connection to the server
+ * @vhost: ibmvfc host struct
+ **/
static void ibmvfc_reset_host(struct ibmvfc_host *vhost)
{
unsigned long flags;
@@ -842,9 +867,13 @@
* ibmvfc_retry_host_init - Retry host initialization if allowed
* @vhost: ibmvfc host struct
*
+ * Returns: 1 if init will be retried / 0 if not
+ *
**/
-static void ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
+static int ibmvfc_retry_host_init(struct ibmvfc_host *vhost)
{
+ int retry = 0;
+
if (vhost->action == IBMVFC_HOST_ACTION_INIT_WAIT) {
vhost->delay_init = 1;
if (++vhost->init_retries > IBMVFC_MAX_HOST_INIT_RETRIES) {
@@ -853,11 +882,14 @@
ibmvfc_link_down(vhost, IBMVFC_HOST_OFFLINE);
} else if (vhost->init_retries == IBMVFC_MAX_HOST_INIT_RETRIES)
__ibmvfc_reset_host(vhost);
- else
+ else {
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
+ retry = 1;
+ }
}
wake_up(&vhost->work_wait_q);
+ return retry;
}
/**
@@ -1137,8 +1169,9 @@
login_info->partition_num = vhost->partition_number;
login_info->vfc_frame_version = 1;
login_info->fcp_version = 3;
+ login_info->flags = IBMVFC_FLUSH_ON_HALT;
if (vhost->client_migrated)
- login_info->flags = IBMVFC_CLIENT_MIGRATED;
+ login_info->flags |= IBMVFC_CLIENT_MIGRATED;
login_info->max_cmds = max_requests + IBMVFC_NUM_INTERNAL_REQ;
login_info->capabilities = IBMVFC_CAN_MIGRATE;
@@ -1452,6 +1485,27 @@
}
/**
+ * ibmvfc_relogin - Log back into the specified device
+ * @sdev: scsi device struct
+ *
+ **/
+static void ibmvfc_relogin(struct scsi_device *sdev)
+{
+ struct ibmvfc_host *vhost = shost_priv(sdev->host);
+ struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+ struct ibmvfc_target *tgt;
+
+ list_for_each_entry(tgt, &vhost->targets, queue) {
+ if (rport == tgt->rport) {
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+ break;
+ }
+ }
+
+ ibmvfc_reinit_host(vhost);
+}
+
+/**
* ibmvfc_scsi_done - Handle responses from commands
* @evt: ibmvfc event to be handled
*
@@ -1483,7 +1537,7 @@
if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
if ((vfc_cmd->status & IBMVFC_VIOS_FAILURE) && (vfc_cmd->error == IBMVFC_PLOGI_REQUIRED))
- ibmvfc_reinit_host(evt->vhost);
+ ibmvfc_relogin(cmnd->device);
if (!cmnd->result && (!scsi_get_resid(cmnd) || (rsp->flags & FCP_RESID_OVER)))
cmnd->result = (DID_ERROR << 16);
@@ -2148,13 +2202,31 @@
struct ibmvfc_host *vhost)
{
const char *desc = ibmvfc_get_ae_desc(crq->event);
+ struct ibmvfc_target *tgt;
ibmvfc_log(vhost, 3, "%s event received. scsi_id: %llx, wwpn: %llx,"
" node_name: %llx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
switch (crq->event) {
- case IBMVFC_AE_LINK_UP:
case IBMVFC_AE_RESUME:
+ switch (crq->link_state) {
+ case IBMVFC_AE_LS_LINK_DOWN:
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DOWN);
+ break;
+ case IBMVFC_AE_LS_LINK_DEAD:
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+ break;
+ case IBMVFC_AE_LS_LINK_UP:
+ case IBMVFC_AE_LS_LINK_BOUNCED:
+ default:
+ vhost->events_to_log |= IBMVFC_AE_LINKUP;
+ vhost->delay_init = 1;
+ __ibmvfc_reset_host(vhost);
+ break;
+ };
+
+ break;
+ case IBMVFC_AE_LINK_UP:
vhost->events_to_log |= IBMVFC_AE_LINKUP;
vhost->delay_init = 1;
__ibmvfc_reset_host(vhost);
@@ -2168,9 +2240,23 @@
case IBMVFC_AE_SCN_NPORT:
case IBMVFC_AE_SCN_GROUP:
vhost->events_to_log |= IBMVFC_AE_RSCN;
+ ibmvfc_reinit_host(vhost);
+ break;
case IBMVFC_AE_ELS_LOGO:
case IBMVFC_AE_ELS_PRLO:
case IBMVFC_AE_ELS_PLOGI:
+ list_for_each_entry(tgt, &vhost->targets, queue) {
+ if (!crq->scsi_id && !crq->wwpn && !crq->node_name)
+ break;
+ if (crq->scsi_id && tgt->scsi_id != crq->scsi_id)
+ continue;
+ if (crq->wwpn && tgt->ids.port_name != crq->wwpn)
+ continue;
+ if (crq->node_name && tgt->ids.node_name != crq->node_name)
+ continue;
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+ }
+
ibmvfc_reinit_host(vhost);
break;
case IBMVFC_AE_LINK_DOWN:
@@ -2222,6 +2308,7 @@
return;
case IBMVFC_CRQ_XPORT_EVENT:
vhost->state = IBMVFC_NO_CRQ;
+ vhost->logged_in = 0;
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
if (crq->format == IBMVFC_PARTITION_MIGRATED) {
/* We need to re-setup the interpartition connection */
@@ -2299,7 +2386,7 @@
done = 1;
}
- if (vhost->state != IBMVFC_NO_CRQ && vhost->action == IBMVFC_HOST_ACTION_NONE)
+ if (vhost->scan_complete)
done = 1;
spin_unlock_irqrestore(shost->host_lock, flags);
return done;
@@ -2434,14 +2521,6 @@
vhost->login_buf->resp.partition_name);
}
-static struct device_attribute ibmvfc_host_partition_name = {
- .attr = {
- .name = "partition_name",
- .mode = S_IRUGO,
- },
- .show = ibmvfc_show_host_partition_name,
-};
-
static ssize_t ibmvfc_show_host_device_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -2452,14 +2531,6 @@
vhost->login_buf->resp.device_name);
}
-static struct device_attribute ibmvfc_host_device_name = {
- .attr = {
- .name = "device_name",
- .mode = S_IRUGO,
- },
- .show = ibmvfc_show_host_device_name,
-};
-
static ssize_t ibmvfc_show_host_loc_code(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -2470,14 +2541,6 @@
vhost->login_buf->resp.port_loc_code);
}
-static struct device_attribute ibmvfc_host_loc_code = {
- .attr = {
- .name = "port_loc_code",
- .mode = S_IRUGO,
- },
- .show = ibmvfc_show_host_loc_code,
-};
-
static ssize_t ibmvfc_show_host_drc_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -2488,14 +2551,6 @@
vhost->login_buf->resp.drc_name);
}
-static struct device_attribute ibmvfc_host_drc_name = {
- .attr = {
- .name = "drc_name",
- .mode = S_IRUGO,
- },
- .show = ibmvfc_show_host_drc_name,
-};
-
static ssize_t ibmvfc_show_host_npiv_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -2504,13 +2559,13 @@
return snprintf(buf, PAGE_SIZE, "%d\n", vhost->login_buf->resp.version);
}
-static struct device_attribute ibmvfc_host_npiv_version = {
- .attr = {
- .name = "npiv_version",
- .mode = S_IRUGO,
- },
- .show = ibmvfc_show_host_npiv_version,
-};
+static ssize_t ibmvfc_show_host_capabilities(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ibmvfc_host *vhost = shost_priv(shost);
+ return snprintf(buf, PAGE_SIZE, "%llx\n", vhost->login_buf->resp.capabilities);
+}
/**
* ibmvfc_show_log_level - Show the adapter's error logging level
@@ -2556,14 +2611,14 @@
return strlen(buf);
}
-static struct device_attribute ibmvfc_log_level_attr = {
- .attr = {
- .name = "log_level",
- .mode = S_IRUGO | S_IWUSR,
- },
- .show = ibmvfc_show_log_level,
- .store = ibmvfc_store_log_level
-};
+static DEVICE_ATTR(partition_name, S_IRUGO, ibmvfc_show_host_partition_name, NULL);
+static DEVICE_ATTR(device_name, S_IRUGO, ibmvfc_show_host_device_name, NULL);
+static DEVICE_ATTR(port_loc_code, S_IRUGO, ibmvfc_show_host_loc_code, NULL);
+static DEVICE_ATTR(drc_name, S_IRUGO, ibmvfc_show_host_drc_name, NULL);
+static DEVICE_ATTR(npiv_version, S_IRUGO, ibmvfc_show_host_npiv_version, NULL);
+static DEVICE_ATTR(capabilities, S_IRUGO, ibmvfc_show_host_capabilities, NULL);
+static DEVICE_ATTR(log_level, S_IRUGO | S_IWUSR,
+ ibmvfc_show_log_level, ibmvfc_store_log_level);
#ifdef CONFIG_SCSI_IBMVFC_TRACE
/**
@@ -2612,12 +2667,13 @@
#endif
static struct device_attribute *ibmvfc_attrs[] = {
- &ibmvfc_host_partition_name,
- &ibmvfc_host_device_name,
- &ibmvfc_host_loc_code,
- &ibmvfc_host_drc_name,
- &ibmvfc_host_npiv_version,
- &ibmvfc_log_level_attr,
+ &dev_attr_partition_name,
+ &dev_attr_device_name,
+ &dev_attr_port_loc_code,
+ &dev_attr_drc_name,
+ &dev_attr_npiv_version,
+ &dev_attr_capabilities,
+ &dev_attr_log_level,
NULL
};
@@ -2774,15 +2830,19 @@
* @tgt: ibmvfc target struct
* @job_step: initialization job step
*
+ * Returns: 1 if step will be retried / 0 if not
+ *
**/
-static void ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
+static int ibmvfc_retry_tgt_init(struct ibmvfc_target *tgt,
void (*job_step) (struct ibmvfc_target *))
{
if (++tgt->init_retries > IBMVFC_MAX_TGT_INIT_RETRIES) {
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
wake_up(&tgt->vhost->work_wait_q);
+ return 0;
} else
ibmvfc_init_tgt(tgt, job_step);
+ return 1;
}
/* Defined in FC-LS */
@@ -2831,7 +2891,7 @@
struct ibmvfc_process_login *rsp = &evt->xfer_iu->prli;
struct ibmvfc_prli_svc_parms *parms = &rsp->parms;
u32 status = rsp->common.status;
- int index;
+ int index, level = IBMVFC_DEFAULT_LOG_LEVEL;
vhost->discovery_threads--;
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2850,7 +2910,7 @@
tgt->ids.roles |= FC_PORT_ROLE_FCP_TARGET;
if (parms->service_parms & IBMVFC_PRLI_INITIATOR_FUNC)
tgt->ids.roles |= FC_PORT_ROLE_FCP_INITIATOR;
- ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_ADD_RPORT);
+ tgt->add_rport = 1;
} else
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
} else if (prli_rsp[index].retry)
@@ -2867,13 +2927,14 @@
break;
case IBMVFC_MAD_FAILED:
default:
- tgt_err(tgt, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
- ibmvfc_get_cmd_error(rsp->status, rsp->error),
- rsp->status, rsp->error, status);
if (ibmvfc_retry_cmd(rsp->status, rsp->error))
- ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
+ level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_prli);
else
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+ tgt_log(tgt, level, "Process Login failed: %s (%x:%x) rc=0x%02X\n",
+ ibmvfc_get_cmd_error(rsp->status, rsp->error),
+ rsp->status, rsp->error, status);
break;
};
@@ -2932,6 +2993,7 @@
struct ibmvfc_host *vhost = evt->vhost;
struct ibmvfc_port_login *rsp = &evt->xfer_iu->plogi;
u32 status = rsp->common.status;
+ int level = IBMVFC_DEFAULT_LOG_LEVEL;
vhost->discovery_threads--;
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -2960,15 +3022,15 @@
break;
case IBMVFC_MAD_FAILED:
default:
- tgt_err(tgt, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+ if (ibmvfc_retry_cmd(rsp->status, rsp->error))
+ level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
+ else
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+ tgt_log(tgt, level, "Port Login failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
ibmvfc_get_ls_explain(rsp->fc_explain), rsp->fc_explain, status);
-
- if (ibmvfc_retry_cmd(rsp->status, rsp->error))
- ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_send_plogi);
- else
- ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
break;
};
@@ -3129,13 +3191,13 @@
case IBMVFC_MAD_SUCCESS:
tgt_dbg(tgt, "ADISC succeeded\n");
if (ibmvfc_adisc_needs_plogi(mad, tgt))
- tgt->need_login = 1;
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
break;
case IBMVFC_MAD_DRIVER_FAILED:
break;
case IBMVFC_MAD_FAILED:
default:
- tgt->need_login = 1;
+ ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
fc_reason = (mad->fc_iu.response[1] & 0x00ff0000) >> 16;
fc_explain = (mad->fc_iu.response[1] & 0x0000ff00) >> 8;
tgt_info(tgt, "ADISC failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
@@ -3322,6 +3384,7 @@
struct ibmvfc_host *vhost = evt->vhost;
struct ibmvfc_query_tgt *rsp = &evt->xfer_iu->query_tgt;
u32 status = rsp->common.status;
+ int level = IBMVFC_DEFAULT_LOG_LEVEL;
vhost->discovery_threads--;
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
@@ -3341,19 +3404,19 @@
break;
case IBMVFC_MAD_FAILED:
default:
- tgt_err(tgt, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
- ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
- ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
- ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
-
if ((rsp->status & IBMVFC_FABRIC_MAPPED) == IBMVFC_FABRIC_MAPPED &&
rsp->error == IBMVFC_UNABLE_TO_PERFORM_REQ &&
rsp->fc_explain == IBMVFC_PORT_NAME_NOT_REG)
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
else if (ibmvfc_retry_cmd(rsp->status, rsp->error))
- ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
+ level += ibmvfc_retry_tgt_init(tgt, ibmvfc_tgt_query_target);
else
ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_DEL_RPORT);
+
+ tgt_log(tgt, level, "Query Target failed: %s (%x:%x) %s (%x) %s (%x) rc=0x%02X\n",
+ ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error,
+ ibmvfc_get_fc_type(rsp->fc_type), rsp->fc_type,
+ ibmvfc_get_gs_explain(rsp->fc_explain), rsp->fc_explain, status);
break;
};
@@ -3420,7 +3483,7 @@
}
spin_unlock_irqrestore(vhost->host->host_lock, flags);
- tgt = mempool_alloc(vhost->tgt_pool, GFP_KERNEL);
+ tgt = mempool_alloc(vhost->tgt_pool, GFP_NOIO);
if (!tgt) {
dev_err(vhost->dev, "Target allocation failure for scsi id %08llx\n",
scsi_id);
@@ -3472,6 +3535,7 @@
struct ibmvfc_host *vhost = evt->vhost;
struct ibmvfc_discover_targets *rsp = &evt->xfer_iu->discover_targets;
u32 mad_status = rsp->common.status;
+ int level = IBMVFC_DEFAULT_LOG_LEVEL;
switch (mad_status) {
case IBMVFC_MAD_SUCCESS:
@@ -3480,9 +3544,9 @@
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_ALLOC_TGTS);
break;
case IBMVFC_MAD_FAILED:
- dev_err(vhost->dev, "Discover Targets failed: %s (%x:%x)\n",
- ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
- ibmvfc_retry_host_init(vhost);
+ level += ibmvfc_retry_host_init(vhost);
+ ibmvfc_log(vhost, level, "Discover Targets failed: %s (%x:%x)\n",
+ ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
break;
case IBMVFC_MAD_DRIVER_FAILED:
break;
@@ -3534,18 +3598,19 @@
u32 mad_status = evt->xfer_iu->npiv_login.common.status;
struct ibmvfc_npiv_login_resp *rsp = &vhost->login_buf->resp;
unsigned int npiv_max_sectors;
+ int level = IBMVFC_DEFAULT_LOG_LEVEL;
switch (mad_status) {
case IBMVFC_MAD_SUCCESS:
ibmvfc_free_event(evt);
break;
case IBMVFC_MAD_FAILED:
- dev_err(vhost->dev, "NPIV Login failed: %s (%x:%x)\n",
- ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
if (ibmvfc_retry_cmd(rsp->status, rsp->error))
- ibmvfc_retry_host_init(vhost);
+ level += ibmvfc_retry_host_init(vhost);
else
ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+ ibmvfc_log(vhost, level, "NPIV Login failed: %s (%x:%x)\n",
+ ibmvfc_get_cmd_error(rsp->status, rsp->error), rsp->status, rsp->error);
ibmvfc_free_event(evt);
return;
case IBMVFC_MAD_CRQ_ERROR:
@@ -3578,6 +3643,7 @@
return;
}
+ vhost->logged_in = 1;
npiv_max_sectors = min((uint)(rsp->max_dma_len >> 9), IBMVFC_MAX_SECTORS);
dev_info(vhost->dev, "Host partition: %s, device: %s %s %s max sectors %u\n",
rsp->partition_name, rsp->device_name, rsp->port_loc_code,
@@ -3636,6 +3702,65 @@
};
/**
+ * ibmvfc_npiv_logout_done - Completion handler for NPIV Logout
+ * @vhost: ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout_done(struct ibmvfc_event *evt)
+{
+ struct ibmvfc_host *vhost = evt->vhost;
+ u32 mad_status = evt->xfer_iu->npiv_logout.common.status;
+
+ ibmvfc_free_event(evt);
+
+ switch (mad_status) {
+ case IBMVFC_MAD_SUCCESS:
+ if (list_empty(&vhost->sent) &&
+ vhost->action == IBMVFC_HOST_ACTION_LOGO_WAIT) {
+ ibmvfc_init_host(vhost, 0);
+ return;
+ }
+ break;
+ case IBMVFC_MAD_FAILED:
+ case IBMVFC_MAD_NOT_SUPPORTED:
+ case IBMVFC_MAD_CRQ_ERROR:
+ case IBMVFC_MAD_DRIVER_FAILED:
+ default:
+ ibmvfc_dbg(vhost, "NPIV Logout failed. 0x%X\n", mad_status);
+ break;
+ }
+
+ ibmvfc_hard_reset_host(vhost);
+}
+
+/**
+ * ibmvfc_npiv_logout - Issue an NPIV Logout
+ * @vhost: ibmvfc host struct
+ *
+ **/
+static void ibmvfc_npiv_logout(struct ibmvfc_host *vhost)
+{
+ struct ibmvfc_npiv_logout_mad *mad;
+ struct ibmvfc_event *evt;
+
+ evt = ibmvfc_get_event(vhost);
+ ibmvfc_init_event(evt, ibmvfc_npiv_logout_done, IBMVFC_MAD_FORMAT);
+
+ mad = &evt->iu.npiv_logout;
+ memset(mad, 0, sizeof(*mad));
+ mad->common.version = 1;
+ mad->common.opcode = IBMVFC_NPIV_LOGOUT;
+ mad->common.length = sizeof(struct ibmvfc_npiv_logout_mad);
+
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_LOGO_WAIT);
+
+ if (!ibmvfc_send_event(evt, vhost, default_timeout))
+ ibmvfc_dbg(vhost, "Sent NPIV logout\n");
+ else
+ ibmvfc_link_down(vhost, IBMVFC_LINK_DEAD);
+}
+
+/**
* ibmvfc_dev_init_to_do - Is there target initialization work to do?
* @vhost: ibmvfc host struct
*
@@ -3671,6 +3796,7 @@
switch (vhost->action) {
case IBMVFC_HOST_ACTION_NONE:
case IBMVFC_HOST_ACTION_INIT_WAIT:
+ case IBMVFC_HOST_ACTION_LOGO_WAIT:
return 0;
case IBMVFC_HOST_ACTION_TGT_INIT:
case IBMVFC_HOST_ACTION_QUERY_TGTS:
@@ -3683,9 +3809,9 @@
if (tgt->action == IBMVFC_TGT_ACTION_INIT_WAIT)
return 0;
return 1;
+ case IBMVFC_HOST_ACTION_LOGO:
case IBMVFC_HOST_ACTION_INIT:
case IBMVFC_HOST_ACTION_ALLOC_TGTS:
- case IBMVFC_HOST_ACTION_TGT_ADD:
case IBMVFC_HOST_ACTION_TGT_DEL:
case IBMVFC_HOST_ACTION_TGT_DEL_FAILED:
case IBMVFC_HOST_ACTION_QUERY:
@@ -3740,25 +3866,26 @@
static void ibmvfc_tgt_add_rport(struct ibmvfc_target *tgt)
{
struct ibmvfc_host *vhost = tgt->vhost;
- struct fc_rport *rport = tgt->rport;
+ struct fc_rport *rport;
unsigned long flags;
- if (rport) {
- tgt_dbg(tgt, "Setting rport roles\n");
- fc_remote_port_rolechg(rport, tgt->ids.roles);
- spin_lock_irqsave(vhost->host->host_lock, flags);
- ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
- spin_unlock_irqrestore(vhost->host->host_lock, flags);
- return;
- }
-
tgt_dbg(tgt, "Adding rport\n");
rport = fc_remote_port_add(vhost->host, 0, &tgt->ids);
spin_lock_irqsave(vhost->host->host_lock, flags);
- tgt->rport = rport;
- ibmvfc_set_tgt_action(tgt, IBMVFC_TGT_ACTION_NONE);
+
+ if (rport && tgt->action == IBMVFC_TGT_ACTION_DEL_RPORT) {
+ tgt_dbg(tgt, "Deleting rport\n");
+ list_del(&tgt->queue);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ fc_remote_port_delete(rport);
+ del_timer_sync(&tgt->timer);
+ kref_put(&tgt->kref, ibmvfc_release_tgt);
+ return;
+ }
+
if (rport) {
tgt_dbg(tgt, "rport add succeeded\n");
+ tgt->rport = rport;
rport->maxframe_size = tgt->service_parms.common.bb_rcv_sz & 0x0fff;
rport->supported_classes = 0;
tgt->target_id = rport->scsi_target_id;
@@ -3789,8 +3916,12 @@
vhost->events_to_log = 0;
switch (vhost->action) {
case IBMVFC_HOST_ACTION_NONE:
+ case IBMVFC_HOST_ACTION_LOGO_WAIT:
case IBMVFC_HOST_ACTION_INIT_WAIT:
break;
+ case IBMVFC_HOST_ACTION_LOGO:
+ vhost->job_step(vhost);
+ break;
case IBMVFC_HOST_ACTION_INIT:
BUG_ON(vhost->state != IBMVFC_INITIALIZING);
if (vhost->delay_init) {
@@ -3836,11 +3967,21 @@
if (vhost->state == IBMVFC_INITIALIZING) {
if (vhost->action == IBMVFC_HOST_ACTION_TGT_DEL_FAILED) {
- ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
- ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_ADD);
- vhost->init_retries = 0;
- spin_unlock_irqrestore(vhost->host->host_lock, flags);
- scsi_unblock_requests(vhost->host);
+ if (vhost->reinit) {
+ vhost->reinit = 0;
+ scsi_block_requests(vhost->host);
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ } else {
+ ibmvfc_set_host_state(vhost, IBMVFC_ACTIVE);
+ ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
+ wake_up(&vhost->init_wait_q);
+ schedule_work(&vhost->rport_add_work_q);
+ vhost->init_retries = 0;
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ scsi_unblock_requests(vhost->host);
+ }
+
return;
} else {
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT);
@@ -3871,24 +4012,6 @@
if (!ibmvfc_dev_init_to_do(vhost))
ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_TGT_DEL_FAILED);
break;
- case IBMVFC_HOST_ACTION_TGT_ADD:
- list_for_each_entry(tgt, &vhost->targets, queue) {
- if (tgt->action == IBMVFC_TGT_ACTION_ADD_RPORT) {
- spin_unlock_irqrestore(vhost->host->host_lock, flags);
- ibmvfc_tgt_add_rport(tgt);
- return;
- }
- }
-
- if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
- vhost->reinit = 0;
- scsi_block_requests(vhost->host);
- ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
- } else {
- ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
- wake_up(&vhost->init_wait_q);
- }
- break;
default:
break;
};
@@ -4118,6 +4241,56 @@
}
/**
+ * ibmvfc_rport_add_thread - Worker thread for rport adds
+ * @work: work struct
+ *
+ **/
+static void ibmvfc_rport_add_thread(struct work_struct *work)
+{
+ struct ibmvfc_host *vhost = container_of(work, struct ibmvfc_host,
+ rport_add_work_q);
+ struct ibmvfc_target *tgt;
+ struct fc_rport *rport;
+ unsigned long flags;
+ int did_work;
+
+ ENTER;
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ do {
+ did_work = 0;
+ if (vhost->state != IBMVFC_ACTIVE)
+ break;
+
+ list_for_each_entry(tgt, &vhost->targets, queue) {
+ if (tgt->add_rport) {
+ did_work = 1;
+ tgt->add_rport = 0;
+ kref_get(&tgt->kref);
+ rport = tgt->rport;
+ if (!rport) {
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ ibmvfc_tgt_add_rport(tgt);
+ } else if (get_device(&rport->dev)) {
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ tgt_dbg(tgt, "Setting rport roles\n");
+ fc_remote_port_rolechg(rport, tgt->ids.roles);
+ put_device(&rport->dev);
+ }
+
+ kref_put(&tgt->kref, ibmvfc_release_tgt);
+ spin_lock_irqsave(vhost->host->host_lock, flags);
+ break;
+ }
+ }
+ } while(did_work);
+
+ if (vhost->state == IBMVFC_ACTIVE)
+ vhost->scan_complete = 1;
+ spin_unlock_irqrestore(vhost->host->host_lock, flags);
+ LEAVE;
+}
+
+/**
* ibmvfc_probe - Adapter hot plug add entry point
* @vdev: vio device struct
* @id: vio device id struct
@@ -4160,6 +4333,7 @@
strcpy(vhost->partition_name, "UNKNOWN");
init_waitqueue_head(&vhost->work_wait_q);
init_waitqueue_head(&vhost->init_wait_q);
+ INIT_WORK(&vhost->rport_add_work_q, ibmvfc_rport_add_thread);
if ((rc = ibmvfc_alloc_mem(vhost)))
goto free_scsi_host;
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index ca1dcf7..c2668d7 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
#include "viosrp.h"
#define IBMVFC_NAME "ibmvfc"
-#define IBMVFC_DRIVER_VERSION "1.0.5"
-#define IBMVFC_DRIVER_DATE "(March 19, 2009)"
+#define IBMVFC_DRIVER_VERSION "1.0.6"
+#define IBMVFC_DRIVER_DATE "(May 28, 2009)"
#define IBMVFC_DEFAULT_TIMEOUT 60
#define IBMVFC_ADISC_CANCEL_TIMEOUT 45
@@ -57,9 +57,10 @@
* Ensure we have resources for ERP and initialization:
* 1 for ERP
* 1 for initialization
+ * 1 for NPIV Logout
* 2 for each discovery thread
*/
-#define IBMVFC_NUM_INTERNAL_REQ (1 + 1 + (disc_threads * 2))
+#define IBMVFC_NUM_INTERNAL_REQ (1 + 1 + 1 + (disc_threads * 2))
#define IBMVFC_MAD_SUCCESS 0x00
#define IBMVFC_MAD_NOT_SUPPORTED 0xF1
@@ -127,6 +128,7 @@
IBMVFC_IMPLICIT_LOGOUT = 0x0040,
IBMVFC_PASSTHRU = 0x0200,
IBMVFC_TMF_MAD = 0x0100,
+ IBMVFC_NPIV_LOGOUT = 0x0800,
};
struct ibmvfc_mad_common {
@@ -143,6 +145,10 @@
struct srp_direct_buf buffer;
}__attribute__((packed, aligned (8)));
+struct ibmvfc_npiv_logout_mad {
+ struct ibmvfc_mad_common common;
+}__attribute__((packed, aligned (8)));
+
#define IBMVFC_MAX_NAME 256
struct ibmvfc_npiv_login {
@@ -201,7 +207,8 @@
#define IBMVFC_NATIVE_FC 0x01
#define IBMVFC_CAN_FLUSH_ON_HALT 0x08
u32 reserved;
- u64 capabilites;
+ u64 capabilities;
+#define IBMVFC_CAN_FLUSH_ON_HALT 0x08
u32 max_cmds;
u32 scsi_id_sz;
u64 max_dma_len;
@@ -541,9 +548,17 @@
dma_addr_t msg_token;
};
+enum ibmvfc_ae_link_state {
+ IBMVFC_AE_LS_LINK_UP = 0x01,
+ IBMVFC_AE_LS_LINK_BOUNCED = 0x02,
+ IBMVFC_AE_LS_LINK_DOWN = 0x04,
+ IBMVFC_AE_LS_LINK_DEAD = 0x08,
+};
+
struct ibmvfc_async_crq {
volatile u8 valid;
- u8 pad[3];
+ u8 link_state;
+ u8 pad[2];
u32 pad2;
volatile u64 event;
volatile u64 scsi_id;
@@ -561,6 +576,7 @@
union ibmvfc_iu {
struct ibmvfc_mad_common mad_common;
struct ibmvfc_npiv_login_mad npiv_login;
+ struct ibmvfc_npiv_logout_mad npiv_logout;
struct ibmvfc_discover_targets discover_targets;
struct ibmvfc_port_login plogi;
struct ibmvfc_process_login prli;
@@ -575,7 +591,6 @@
IBMVFC_TGT_ACTION_NONE = 0,
IBMVFC_TGT_ACTION_INIT,
IBMVFC_TGT_ACTION_INIT_WAIT,
- IBMVFC_TGT_ACTION_ADD_RPORT,
IBMVFC_TGT_ACTION_DEL_RPORT,
};
@@ -588,6 +603,7 @@
int target_id;
enum ibmvfc_target_action action;
int need_login;
+ int add_rport;
int init_retries;
u32 cancel_key;
struct ibmvfc_service_parms service_parms;
@@ -627,6 +643,8 @@
enum ibmvfc_host_action {
IBMVFC_HOST_ACTION_NONE = 0,
+ IBMVFC_HOST_ACTION_LOGO,
+ IBMVFC_HOST_ACTION_LOGO_WAIT,
IBMVFC_HOST_ACTION_INIT,
IBMVFC_HOST_ACTION_INIT_WAIT,
IBMVFC_HOST_ACTION_QUERY,
@@ -635,7 +653,6 @@
IBMVFC_HOST_ACTION_ALLOC_TGTS,
IBMVFC_HOST_ACTION_TGT_INIT,
IBMVFC_HOST_ACTION_TGT_DEL_FAILED,
- IBMVFC_HOST_ACTION_TGT_ADD,
};
enum ibmvfc_host_state {
@@ -682,6 +699,8 @@
int client_migrated;
int reinit;
int delay_init;
+ int scan_complete;
+ int logged_in;
int events_to_log;
#define IBMVFC_AE_LINKUP 0x0001
#define IBMVFC_AE_LINKDOWN 0x0002
@@ -692,6 +711,7 @@
void (*job_step) (struct ibmvfc_host *);
struct task_struct *work_thread;
struct tasklet_struct tasklet;
+ struct work_struct rport_add_work_q;
wait_queue_head_t init_wait_q;
wait_queue_head_t work_wait_q;
};
@@ -707,6 +727,12 @@
#define tgt_err(t, fmt, ...) \
dev_err((t)->vhost->dev, "%llX: " fmt, (t)->scsi_id, ##__VA_ARGS__)
+#define tgt_log(t, level, fmt, ...) \
+ do { \
+ if ((t)->vhost->log_level >= level) \
+ tgt_err(t, fmt, ##__VA_ARGS__); \
+ } while (0)
+
#define ibmvfc_dbg(vhost, ...) \
DBG_CMD(dev_info((vhost)->dev, ##__VA_ARGS__))
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index c9aa761..11d2602 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -70,6 +70,7 @@
#include <linux/moduleparam.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/of.h>
#include <asm/firmware.h>
#include <asm/vio.h>
#include <asm/firmware.h>
@@ -87,9 +88,15 @@
*/
static int max_id = 64;
static int max_channel = 3;
-static int init_timeout = 5;
+static int init_timeout = 300;
+static int login_timeout = 60;
+static int info_timeout = 30;
+static int abort_timeout = 60;
+static int reset_timeout = 60;
static int max_requests = IBMVSCSI_MAX_REQUESTS_DEFAULT;
static int max_events = IBMVSCSI_MAX_REQUESTS_DEFAULT + 2;
+static int fast_fail = 1;
+static int client_reserve = 1;
static struct scsi_transport_template *ibmvscsi_transport_template;
@@ -110,6 +117,10 @@
MODULE_PARM_DESC(init_timeout, "Initialization timeout in seconds");
module_param_named(max_requests, max_requests, int, S_IRUGO);
MODULE_PARM_DESC(max_requests, "Maximum requests for this adapter");
+module_param_named(fast_fail, fast_fail, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(fast_fail, "Enable fast fail. [Default=1]");
+module_param_named(client_reserve, client_reserve, int, S_IRUGO );
+MODULE_PARM_DESC(client_reserve, "Attempt client managed reserve/release");
/* ------------------------------------------------------------
* Routines for the event pool and event structs
@@ -781,105 +792,53 @@
/* ------------------------------------------------------------
* Routines for driver initialization
*/
-/**
- * adapter_info_rsp: - Handle response to MAD adapter info request
- * @evt_struct: srp_event_struct with the response
- *
- * Used as a "done" callback by when sending adapter_info. Gets called
- * by ibmvscsi_handle_crq()
-*/
-static void adapter_info_rsp(struct srp_event_struct *evt_struct)
-{
- struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
- dma_unmap_single(hostdata->dev,
- evt_struct->iu.mad.adapter_info.buffer,
- evt_struct->iu.mad.adapter_info.common.length,
- DMA_BIDIRECTIONAL);
- if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
- dev_err(hostdata->dev, "error %d getting adapter info\n",
- evt_struct->xfer_iu->mad.adapter_info.common.status);
- } else {
- dev_info(hostdata->dev, "host srp version: %s, "
- "host partition %s (%d), OS %d, max io %u\n",
- hostdata->madapter_info.srp_version,
- hostdata->madapter_info.partition_name,
- hostdata->madapter_info.partition_number,
- hostdata->madapter_info.os_type,
- hostdata->madapter_info.port_max_txu[0]);
-
- if (hostdata->madapter_info.port_max_txu[0])
- hostdata->host->max_sectors =
- hostdata->madapter_info.port_max_txu[0] >> 9;
-
- if (hostdata->madapter_info.os_type == 3 &&
- strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
- dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
- hostdata->madapter_info.srp_version);
- dev_err(hostdata->dev, "limiting scatterlists to %d\n",
- MAX_INDIRECT_BUFS);
- hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
- }
+/**
+ * map_persist_bufs: - Pre-map persistent data for adapter logins
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ * Map the capabilities and adapter info DMA buffers to avoid runtime failures.
+ * Return 1 on error, 0 on success.
+ */
+static int map_persist_bufs(struct ibmvscsi_host_data *hostdata)
+{
+
+ hostdata->caps_addr = dma_map_single(hostdata->dev, &hostdata->caps,
+ sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+
+ if (dma_mapping_error(hostdata->dev, hostdata->caps_addr)) {
+ dev_err(hostdata->dev, "Unable to map capabilities buffer!\n");
+ return 1;
}
+
+ hostdata->adapter_info_addr = dma_map_single(hostdata->dev,
+ &hostdata->madapter_info,
+ sizeof(hostdata->madapter_info),
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(hostdata->dev, hostdata->adapter_info_addr)) {
+ dev_err(hostdata->dev, "Unable to map adapter info buffer!\n");
+ dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+ sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
+ return 1;
+ }
+
+ return 0;
}
/**
- * send_mad_adapter_info: - Sends the mad adapter info request
- * and stores the result so it can be retrieved with
- * sysfs. We COULD consider causing a failure if the
- * returned SRP version doesn't match ours.
- * @hostdata: ibmvscsi_host_data of host
- *
- * Returns zero if successful.
-*/
-static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+ * unmap_persist_bufs: - Unmap persistent data needed for adapter logins
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ * Unmap the capabilities and adapter info DMA buffers
+ */
+static void unmap_persist_bufs(struct ibmvscsi_host_data *hostdata)
{
- struct viosrp_adapter_info *req;
- struct srp_event_struct *evt_struct;
- unsigned long flags;
- dma_addr_t addr;
+ dma_unmap_single(hostdata->dev, hostdata->caps_addr,
+ sizeof(hostdata->caps), DMA_BIDIRECTIONAL);
- evt_struct = get_event_struct(&hostdata->pool);
- if (!evt_struct) {
- dev_err(hostdata->dev,
- "couldn't allocate an event for ADAPTER_INFO_REQ!\n");
- return;
- }
-
- init_event_struct(evt_struct,
- adapter_info_rsp,
- VIOSRP_MAD_FORMAT,
- init_timeout);
-
- req = &evt_struct->iu.mad.adapter_info;
- memset(req, 0x00, sizeof(*req));
-
- req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
- req->common.length = sizeof(hostdata->madapter_info);
- req->buffer = addr = dma_map_single(hostdata->dev,
- &hostdata->madapter_info,
- sizeof(hostdata->madapter_info),
- DMA_BIDIRECTIONAL);
-
- if (dma_mapping_error(hostdata->dev, req->buffer)) {
- if (!firmware_has_feature(FW_FEATURE_CMO))
- dev_err(hostdata->dev,
- "Unable to map request_buffer for "
- "adapter_info!\n");
- free_event_struct(&hostdata->pool, evt_struct);
- return;
- }
-
- spin_lock_irqsave(hostdata->host->host_lock, flags);
- if (ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2)) {
- dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
- dma_unmap_single(hostdata->dev,
- addr,
- sizeof(hostdata->madapter_info),
- DMA_BIDIRECTIONAL);
- }
- spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-};
+ dma_unmap_single(hostdata->dev, hostdata->adapter_info_addr,
+ sizeof(hostdata->madapter_info), DMA_BIDIRECTIONAL);
+}
/**
* login_rsp: - Handle response to SRP login request
@@ -909,9 +868,7 @@
}
dev_info(hostdata->dev, "SRP_LOGIN succeeded\n");
-
- if (evt_struct->xfer_iu->srp.login_rsp.req_lim_delta < 0)
- dev_err(hostdata->dev, "Invalid request_limit.\n");
+ hostdata->client_migrated = 0;
/* Now we know what the real request-limit is.
* This value is set rather than added to request_limit because
@@ -922,15 +879,12 @@
/* If we had any pending I/Os, kick them */
scsi_unblock_requests(hostdata->host);
-
- send_mad_adapter_info(hostdata);
- return;
}
/**
* send_srp_login: - Sends the srp login
* @hostdata: ibmvscsi_host_data of host
- *
+ *
* Returns zero if successful.
*/
static int send_srp_login(struct ibmvscsi_host_data *hostdata)
@@ -939,22 +893,17 @@
unsigned long flags;
struct srp_login_req *login;
struct srp_event_struct *evt_struct = get_event_struct(&hostdata->pool);
- if (!evt_struct) {
- dev_err(hostdata->dev, "couldn't allocate an event for login req!\n");
- return FAILED;
- }
- init_event_struct(evt_struct,
- login_rsp,
- VIOSRP_SRP_FORMAT,
- init_timeout);
+ BUG_ON(!evt_struct);
+ init_event_struct(evt_struct, login_rsp,
+ VIOSRP_SRP_FORMAT, login_timeout);
login = &evt_struct->iu.srp.login_req;
- memset(login, 0x00, sizeof(struct srp_login_req));
+ memset(login, 0, sizeof(*login));
login->opcode = SRP_LOGIN_REQ;
login->req_it_iu_len = sizeof(union srp_iu);
login->req_buf_fmt = SRP_BUF_FORMAT_DIRECT | SRP_BUF_FORMAT_INDIRECT;
-
+
spin_lock_irqsave(hostdata->host->host_lock, flags);
/* Start out with a request limit of 0, since this is negotiated in
* the login request we are just sending and login requests always
@@ -962,13 +911,241 @@
*/
atomic_set(&hostdata->request_limit, 0);
- rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+ rc = ibmvscsi_send_srp_event(evt_struct, hostdata, login_timeout * 2);
spin_unlock_irqrestore(hostdata->host->host_lock, flags);
dev_info(hostdata->dev, "sent SRP login\n");
return rc;
};
/**
+ * capabilities_rsp: - Handle response to MAD adapter capabilities request
+ * @evt_struct: srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info.
+ */
+static void capabilities_rsp(struct srp_event_struct *evt_struct)
+{
+ struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+ if (evt_struct->xfer_iu->mad.capabilities.common.status) {
+ dev_err(hostdata->dev, "error 0x%X getting capabilities info\n",
+ evt_struct->xfer_iu->mad.capabilities.common.status);
+ } else {
+ if (hostdata->caps.migration.common.server_support != SERVER_SUPPORTS_CAP)
+ dev_info(hostdata->dev, "Partition migration not supported\n");
+
+ if (client_reserve) {
+ if (hostdata->caps.reserve.common.server_support ==
+ SERVER_SUPPORTS_CAP)
+ dev_info(hostdata->dev, "Client reserve enabled\n");
+ else
+ dev_info(hostdata->dev, "Client reserve not supported\n");
+ }
+ }
+
+ send_srp_login(hostdata);
+}
+
+/**
+ * send_mad_capabilities: - Sends the mad capabilities request
+ * and stores the result so it can be retrieved with
+ * @hostdata: ibmvscsi_host_data of host
+ */
+static void send_mad_capabilities(struct ibmvscsi_host_data *hostdata)
+{
+ struct viosrp_capabilities *req;
+ struct srp_event_struct *evt_struct;
+ unsigned long flags;
+ struct device_node *of_node = hostdata->dev->archdata.of_node;
+ const char *location;
+
+ evt_struct = get_event_struct(&hostdata->pool);
+ BUG_ON(!evt_struct);
+
+ init_event_struct(evt_struct, capabilities_rsp,
+ VIOSRP_MAD_FORMAT, info_timeout);
+
+ req = &evt_struct->iu.mad.capabilities;
+ memset(req, 0, sizeof(*req));
+
+ hostdata->caps.flags = CAP_LIST_SUPPORTED;
+ if (hostdata->client_migrated)
+ hostdata->caps.flags |= CLIENT_MIGRATED;
+
+ strncpy(hostdata->caps.name, dev_name(&hostdata->host->shost_gendev),
+ sizeof(hostdata->caps.name));
+ hostdata->caps.name[sizeof(hostdata->caps.name) - 1] = '\0';
+
+ location = of_get_property(of_node, "ibm,loc-code", NULL);
+ location = location ? location : dev_name(hostdata->dev);
+ strncpy(hostdata->caps.loc, location, sizeof(hostdata->caps.loc));
+ hostdata->caps.loc[sizeof(hostdata->caps.loc) - 1] = '\0';
+
+ req->common.type = VIOSRP_CAPABILITIES_TYPE;
+ req->buffer = hostdata->caps_addr;
+
+ hostdata->caps.migration.common.cap_type = MIGRATION_CAPABILITIES;
+ hostdata->caps.migration.common.length = sizeof(hostdata->caps.migration);
+ hostdata->caps.migration.common.server_support = SERVER_SUPPORTS_CAP;
+ hostdata->caps.migration.ecl = 1;
+
+ if (client_reserve) {
+ hostdata->caps.reserve.common.cap_type = RESERVATION_CAPABILITIES;
+ hostdata->caps.reserve.common.length = sizeof(hostdata->caps.reserve);
+ hostdata->caps.reserve.common.server_support = SERVER_SUPPORTS_CAP;
+ hostdata->caps.reserve.type = CLIENT_RESERVE_SCSI_2;
+ req->common.length = sizeof(hostdata->caps);
+ } else
+ req->common.length = sizeof(hostdata->caps) - sizeof(hostdata->caps.reserve);
+
+ spin_lock_irqsave(hostdata->host->host_lock, flags);
+ if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+ dev_err(hostdata->dev, "couldn't send CAPABILITIES_REQ!\n");
+ spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * fast_fail_rsp: - Handle response to MAD enable fast fail
+ * @evt_struct: srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending enable fast fail. Gets called
+ * by ibmvscsi_handle_crq()
+ */
+static void fast_fail_rsp(struct srp_event_struct *evt_struct)
+{
+ struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+ u8 status = evt_struct->xfer_iu->mad.fast_fail.common.status;
+
+ if (status == VIOSRP_MAD_NOT_SUPPORTED)
+ dev_err(hostdata->dev, "fast_fail not supported in server\n");
+ else if (status == VIOSRP_MAD_FAILED)
+ dev_err(hostdata->dev, "fast_fail request failed\n");
+ else if (status != VIOSRP_MAD_SUCCESS)
+ dev_err(hostdata->dev, "error 0x%X enabling fast_fail\n", status);
+
+ send_mad_capabilities(hostdata);
+}
+
+/**
+ * init_host - Start host initialization
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ * Returns zero if successful.
+ */
+static int enable_fast_fail(struct ibmvscsi_host_data *hostdata)
+{
+ int rc;
+ unsigned long flags;
+ struct viosrp_fast_fail *fast_fail_mad;
+ struct srp_event_struct *evt_struct;
+
+ if (!fast_fail) {
+ send_mad_capabilities(hostdata);
+ return 0;
+ }
+
+ evt_struct = get_event_struct(&hostdata->pool);
+ BUG_ON(!evt_struct);
+
+ init_event_struct(evt_struct, fast_fail_rsp, VIOSRP_MAD_FORMAT, info_timeout);
+
+ fast_fail_mad = &evt_struct->iu.mad.fast_fail;
+ memset(fast_fail_mad, 0, sizeof(*fast_fail_mad));
+ fast_fail_mad->common.type = VIOSRP_ENABLE_FAST_FAIL;
+ fast_fail_mad->common.length = sizeof(*fast_fail_mad);
+
+ spin_lock_irqsave(hostdata->host->host_lock, flags);
+ rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
+ spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+ return rc;
+}
+
+/**
+ * adapter_info_rsp: - Handle response to MAD adapter info request
+ * @evt_struct: srp_event_struct with the response
+ *
+ * Used as a "done" callback by when sending adapter_info. Gets called
+ * by ibmvscsi_handle_crq()
+*/
+static void adapter_info_rsp(struct srp_event_struct *evt_struct)
+{
+ struct ibmvscsi_host_data *hostdata = evt_struct->hostdata;
+
+ if (evt_struct->xfer_iu->mad.adapter_info.common.status) {
+ dev_err(hostdata->dev, "error %d getting adapter info\n",
+ evt_struct->xfer_iu->mad.adapter_info.common.status);
+ } else {
+ dev_info(hostdata->dev, "host srp version: %s, "
+ "host partition %s (%d), OS %d, max io %u\n",
+ hostdata->madapter_info.srp_version,
+ hostdata->madapter_info.partition_name,
+ hostdata->madapter_info.partition_number,
+ hostdata->madapter_info.os_type,
+ hostdata->madapter_info.port_max_txu[0]);
+
+ if (hostdata->madapter_info.port_max_txu[0])
+ hostdata->host->max_sectors =
+ hostdata->madapter_info.port_max_txu[0] >> 9;
+
+ if (hostdata->madapter_info.os_type == 3 &&
+ strcmp(hostdata->madapter_info.srp_version, "1.6a") <= 0) {
+ dev_err(hostdata->dev, "host (Ver. %s) doesn't support large transfers\n",
+ hostdata->madapter_info.srp_version);
+ dev_err(hostdata->dev, "limiting scatterlists to %d\n",
+ MAX_INDIRECT_BUFS);
+ hostdata->host->sg_tablesize = MAX_INDIRECT_BUFS;
+ }
+ }
+
+ enable_fast_fail(hostdata);
+}
+
+/**
+ * send_mad_adapter_info: - Sends the mad adapter info request
+ * and stores the result so it can be retrieved with
+ * sysfs. We COULD consider causing a failure if the
+ * returned SRP version doesn't match ours.
+ * @hostdata: ibmvscsi_host_data of host
+ *
+ * Returns zero if successful.
+*/
+static void send_mad_adapter_info(struct ibmvscsi_host_data *hostdata)
+{
+ struct viosrp_adapter_info *req;
+ struct srp_event_struct *evt_struct;
+ unsigned long flags;
+
+ evt_struct = get_event_struct(&hostdata->pool);
+ BUG_ON(!evt_struct);
+
+ init_event_struct(evt_struct,
+ adapter_info_rsp,
+ VIOSRP_MAD_FORMAT,
+ info_timeout);
+
+ req = &evt_struct->iu.mad.adapter_info;
+ memset(req, 0x00, sizeof(*req));
+
+ req->common.type = VIOSRP_ADAPTER_INFO_TYPE;
+ req->common.length = sizeof(hostdata->madapter_info);
+ req->buffer = hostdata->adapter_info_addr;
+
+ spin_lock_irqsave(hostdata->host->host_lock, flags);
+ if (ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2))
+ dev_err(hostdata->dev, "couldn't send ADAPTER_INFO_REQ!\n");
+ spin_unlock_irqrestore(hostdata->host->host_lock, flags);
+};
+
+/**
+ * init_adapter: Start virtual adapter initialization sequence
+ *
+ */
+static void init_adapter(struct ibmvscsi_host_data *hostdata)
+{
+ send_mad_adapter_info(hostdata);
+}
+
+/**
* sync_completion: Signal that a synchronous command has completed
* Note that after returning from this call, the evt_struct is freed.
* the caller waiting on this completion shouldn't touch the evt_struct
@@ -1029,7 +1206,7 @@
init_event_struct(evt,
sync_completion,
VIOSRP_SRP_FORMAT,
- init_timeout);
+ abort_timeout);
tsk_mgmt = &evt->iu.srp.tsk_mgmt;
@@ -1043,7 +1220,7 @@
evt->sync_srp = &srp_rsp;
init_completion(&evt->comp);
- rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+ rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, abort_timeout * 2);
if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
break;
@@ -1152,7 +1329,7 @@
init_event_struct(evt,
sync_completion,
VIOSRP_SRP_FORMAT,
- init_timeout);
+ reset_timeout);
tsk_mgmt = &evt->iu.srp.tsk_mgmt;
@@ -1165,7 +1342,7 @@
evt->sync_srp = &srp_rsp;
init_completion(&evt->comp);
- rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, init_timeout * 2);
+ rsp_rc = ibmvscsi_send_srp_event(evt, hostdata, reset_timeout * 2);
if (rsp_rc != SCSI_MLQUEUE_HOST_BUSY)
break;
@@ -1281,7 +1458,7 @@
if ((rc = ibmvscsi_ops->send_crq(hostdata,
0xC002000000000000LL, 0)) == 0) {
/* Now login */
- send_srp_login(hostdata);
+ init_adapter(hostdata);
} else {
dev_err(hostdata->dev, "Unable to send init rsp. rc=%ld\n", rc);
}
@@ -1291,7 +1468,7 @@
dev_info(hostdata->dev, "partner initialization complete\n");
/* Now login */
- send_srp_login(hostdata);
+ init_adapter(hostdata);
break;
default:
dev_err(hostdata->dev, "unknown crq message type: %d\n", crq->format);
@@ -1303,6 +1480,7 @@
if (crq->format == 0x06) {
/* We need to re-setup the interpartition connection */
dev_info(hostdata->dev, "Re-enabling adapter!\n");
+ hostdata->client_migrated = 1;
purge_requests(hostdata, DID_REQUEUE);
if ((ibmvscsi_ops->reenable_crq_queue(&hostdata->queue,
hostdata)) ||
@@ -1397,7 +1575,7 @@
init_event_struct(evt_struct,
sync_completion,
VIOSRP_MAD_FORMAT,
- init_timeout);
+ info_timeout);
host_config = &evt_struct->iu.mad.host_config;
@@ -1419,7 +1597,7 @@
init_completion(&evt_struct->comp);
spin_lock_irqsave(hostdata->host->host_lock, flags);
- rc = ibmvscsi_send_srp_event(evt_struct, hostdata, init_timeout * 2);
+ rc = ibmvscsi_send_srp_event(evt_struct, hostdata, info_timeout * 2);
spin_unlock_irqrestore(hostdata->host->host_lock, flags);
if (rc == 0)
wait_for_completion(&evt_struct->comp);
@@ -1444,7 +1622,7 @@
spin_lock_irqsave(shost->host_lock, lock_flags);
if (sdev->type == TYPE_DISK) {
sdev->allow_restart = 1;
- blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
+ blk_queue_rq_timeout(sdev->request_queue, 120 * HZ);
}
scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
spin_unlock_irqrestore(shost->host_lock, lock_flags);
@@ -1471,6 +1649,46 @@
/* ------------------------------------------------------------
* sysfs attributes
*/
+static ssize_t show_host_vhost_loc(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+ int len;
+
+ len = snprintf(buf, sizeof(hostdata->caps.loc), "%s\n",
+ hostdata->caps.loc);
+ return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_loc = {
+ .attr = {
+ .name = "vhost_loc",
+ .mode = S_IRUGO,
+ },
+ .show = show_host_vhost_loc,
+};
+
+static ssize_t show_host_vhost_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ibmvscsi_host_data *hostdata = shost_priv(shost);
+ int len;
+
+ len = snprintf(buf, sizeof(hostdata->caps.name), "%s\n",
+ hostdata->caps.name);
+ return len;
+}
+
+static struct device_attribute ibmvscsi_host_vhost_name = {
+ .attr = {
+ .name = "vhost_name",
+ .mode = S_IRUGO,
+ },
+ .show = show_host_vhost_name,
+};
+
static ssize_t show_host_srp_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -1594,6 +1812,8 @@
};
static struct device_attribute *ibmvscsi_attrs[] = {
+ &ibmvscsi_host_vhost_loc,
+ &ibmvscsi_host_vhost_name,
&ibmvscsi_host_srp_version,
&ibmvscsi_host_partition_name,
&ibmvscsi_host_partition_number,
@@ -1674,6 +1894,11 @@
atomic_set(&hostdata->request_limit, -1);
hostdata->host->max_sectors = IBMVSCSI_MAX_SECTORS_DEFAULT;
+ if (map_persist_bufs(hostdata)) {
+ dev_err(&vdev->dev, "couldn't map persistent buffers\n");
+ goto persist_bufs_failed;
+ }
+
rc = ibmvscsi_ops->init_crq_queue(&hostdata->queue, hostdata, max_events);
if (rc != 0 && rc != H_RESOURCE) {
dev_err(&vdev->dev, "couldn't initialize crq. rc=%d\n", rc);
@@ -1687,6 +1912,7 @@
host->max_lun = 8;
host->max_id = max_id;
host->max_channel = max_channel;
+ host->max_cmd_len = 16;
if (scsi_add_host(hostdata->host, hostdata->dev))
goto add_host_failed;
@@ -1733,6 +1959,8 @@
init_pool_failed:
ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata, max_events);
init_crq_failed:
+ unmap_persist_bufs(hostdata);
+ persist_bufs_failed:
scsi_host_put(host);
scsi_host_alloc_failed:
return -1;
@@ -1741,6 +1969,7 @@
static int ibmvscsi_remove(struct vio_dev *vdev)
{
struct ibmvscsi_host_data *hostdata = vdev->dev.driver_data;
+ unmap_persist_bufs(hostdata);
release_event_pool(&hostdata->pool, hostdata);
ibmvscsi_ops->release_crq_queue(&hostdata->queue, hostdata,
max_events);
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.h b/drivers/scsi/ibmvscsi/ibmvscsi.h
index 2d4339d..7642530 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.h
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.h
@@ -90,6 +90,7 @@
/* all driver data associated with a host adapter */
struct ibmvscsi_host_data {
atomic_t request_limit;
+ int client_migrated;
struct device *dev;
struct event_pool pool;
struct crq_queue queue;
@@ -97,6 +98,9 @@
struct list_head sent;
struct Scsi_Host *host;
struct mad_adapter_info_data madapter_info;
+ struct capabilities caps;
+ dma_addr_t caps_addr;
+ dma_addr_t adapter_info_addr;
};
/* routines for managing a command/response queue */
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 2046045..2cd735d 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -37,6 +37,7 @@
#define SRP_VERSION "16.a"
#define SRP_MAX_IU_LEN 256
+#define SRP_MAX_LOC_LEN 32
union srp_iu {
struct srp_login_req login_req;
@@ -86,7 +87,37 @@
VIOSRP_EMPTY_IU_TYPE = 0x01,
VIOSRP_ERROR_LOG_TYPE = 0x02,
VIOSRP_ADAPTER_INFO_TYPE = 0x03,
- VIOSRP_HOST_CONFIG_TYPE = 0x04
+ VIOSRP_HOST_CONFIG_TYPE = 0x04,
+ VIOSRP_CAPABILITIES_TYPE = 0x05,
+ VIOSRP_ENABLE_FAST_FAIL = 0x08,
+};
+
+enum viosrp_mad_status {
+ VIOSRP_MAD_SUCCESS = 0x00,
+ VIOSRP_MAD_NOT_SUPPORTED = 0xF1,
+ VIOSRP_MAD_FAILED = 0xF7,
+};
+
+enum viosrp_capability_type {
+ MIGRATION_CAPABILITIES = 0x01,
+ RESERVATION_CAPABILITIES = 0x02,
+};
+
+enum viosrp_capability_support {
+ SERVER_DOES_NOT_SUPPORTS_CAP = 0x0,
+ SERVER_SUPPORTS_CAP = 0x01,
+ SERVER_CAP_DATA = 0x02,
+};
+
+enum viosrp_reserve_type {
+ CLIENT_RESERVE_SCSI_2 = 0x01,
+};
+
+enum viosrp_capability_flag {
+ CLIENT_MIGRATED = 0x01,
+ CLIENT_RECONNECT = 0x02,
+ CAP_LIST_SUPPORTED = 0x04,
+ CAP_LIST_DATA = 0x08,
};
/*
@@ -127,11 +158,46 @@
u64 buffer;
};
+struct viosrp_fast_fail {
+ struct mad_common common;
+};
+
+struct viosrp_capabilities {
+ struct mad_common common;
+ u64 buffer;
+};
+
+struct mad_capability_common {
+ u32 cap_type;
+ u16 length;
+ u16 server_support;
+};
+
+struct mad_reserve_cap {
+ struct mad_capability_common common;
+ u32 type;
+};
+
+struct mad_migration_cap {
+ struct mad_capability_common common;
+ u32 ecl;
+};
+
+struct capabilities{
+ u32 flags;
+ char name[SRP_MAX_LOC_LEN];
+ char loc[SRP_MAX_LOC_LEN];
+ struct mad_migration_cap migration;
+ struct mad_reserve_cap reserve;
+};
+
union mad_iu {
struct viosrp_empty_iu empty_iu;
struct viosrp_error_log error_log;
struct viosrp_adapter_info adapter_info;
struct viosrp_host_config host_config;
+ struct viosrp_fast_fail fast_fail;
+ struct viosrp_capabilities capabilities;
};
union viosrp_iu {
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index dd689de..0f8bc77 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -7003,6 +7003,7 @@
ioa_cfg->sdt_state = ABORT_DUMP;
ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES;
ioa_cfg->in_ioa_bringdown = 1;
+ ioa_cfg->allow_cmds = 0;
ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE);
spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags);
}
@@ -7688,7 +7689,7 @@
* Return value:
* none
**/
-static void ipr_remove(struct pci_dev *pdev)
+static void __devexit ipr_remove(struct pci_dev *pdev)
{
struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev);
@@ -7864,7 +7865,7 @@
.name = IPR_NAME,
.id_table = ipr_pci_table,
.probe = ipr_probe,
- .remove = ipr_remove,
+ .remove = __devexit_p(ipr_remove),
.shutdown = ipr_shutdown,
.err_handler = &ipr_err_handler,
};
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 992af05..7af9bce 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1159,6 +1159,10 @@
atomic_inc(&mp->stats.xid_not_found);
goto out;
}
+ if (ep->esb_stat & ESB_ST_COMPLETE) {
+ atomic_inc(&mp->stats.xid_not_found);
+ goto out;
+ }
if (ep->rxid == FC_XID_UNKNOWN)
ep->rxid = ntohs(fh->fh_rx_id);
if (ep->sid != 0 && ep->sid != ntoh24(fh->fh_d_id)) {
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 521f996..ad8b747 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -1896,7 +1896,7 @@
sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
break;
case FC_CMD_ABORTED:
- sc_cmd->result = (DID_ABORT << 16) | fsp->io_status;
+ sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
break;
case FC_CMD_TIME_OUT:
sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 747d73c..7bfbff7 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -478,7 +478,7 @@
if (PTR_ERR(fp) == -FC_EX_CLOSED)
return fc_rport_error(rport, fp);
- if (rdata->retries < rdata->local_port->max_retry_count) {
+ if (rdata->retries < rdata->local_port->max_rport_retry_count) {
FC_DEBUG_RPORT("Error %ld in state %s, retrying\n",
PTR_ERR(fp), fc_rport_state(rport));
rdata->retries++;
@@ -1330,7 +1330,7 @@
}
EXPORT_SYMBOL(fc_rport_init);
-int fc_setup_rport()
+int fc_setup_rport(void)
{
rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
if (!rport_event_queue)
@@ -1339,7 +1339,7 @@
}
EXPORT_SYMBOL(fc_setup_rport);
-void fc_destroy_rport()
+void fc_destroy_rport(void)
{
destroy_workqueue(rport_event_queue);
}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index e72b4ad..59908ae 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -81,7 +81,8 @@
struct Scsi_Host *shost = conn->session->host;
struct iscsi_host *ihost = shost_priv(shost);
- queue_work(ihost->workq, &conn->xmitwork);
+ if (ihost->workq)
+ queue_work(ihost->workq, &conn->xmitwork);
}
EXPORT_SYMBOL_GPL(iscsi_conn_queue_work);
@@ -109,11 +110,9 @@
* if the window closed with IO queued, then kick the
* xmit thread
*/
- if (!list_empty(&session->leadconn->xmitqueue) ||
- !list_empty(&session->leadconn->mgmtqueue)) {
- if (!(session->tt->caps & CAP_DATA_PATH_OFFLOAD))
- iscsi_conn_queue_work(session->leadconn);
- }
+ if (!list_empty(&session->leadconn->cmdqueue) ||
+ !list_empty(&session->leadconn->mgmtqueue))
+ iscsi_conn_queue_work(session->leadconn);
}
}
EXPORT_SYMBOL_GPL(iscsi_update_cmdsn);
@@ -257,9 +256,11 @@
itt_t itt;
int rc;
- rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
- if (rc)
- return rc;
+ if (conn->session->tt->alloc_pdu) {
+ rc = conn->session->tt->alloc_pdu(task, ISCSI_OP_SCSI_CMD);
+ if (rc)
+ return rc;
+ }
hdr = (struct iscsi_cmd *) task->hdr;
itt = hdr->itt;
memset(hdr, 0, sizeof(*hdr));
@@ -364,7 +365,6 @@
return -EIO;
task->state = ISCSI_TASK_RUNNING;
- list_move_tail(&task->running, &conn->run_list);
conn->scsicmd_pdus_cnt++;
ISCSI_DBG_SESSION(session, "iscsi prep [%s cid %d sc %p cdb 0x%x "
@@ -380,26 +380,25 @@
}
/**
- * iscsi_complete_command - finish a task
+ * iscsi_free_task - free a task
* @task: iscsi cmd task
*
* Must be called with session lock.
* This function returns the scsi command to scsi-ml or cleans
* up mgmt tasks then returns the task to the pool.
*/
-static void iscsi_complete_command(struct iscsi_task *task)
+static void iscsi_free_task(struct iscsi_task *task)
{
struct iscsi_conn *conn = task->conn;
struct iscsi_session *session = conn->session;
struct scsi_cmnd *sc = task->sc;
- session->tt->cleanup_task(task);
- list_del_init(&task->running);
- task->state = ISCSI_TASK_COMPLETED;
- task->sc = NULL;
+ ISCSI_DBG_SESSION(session, "freeing task itt 0x%x state %d sc %p\n",
+ task->itt, task->state, task->sc);
- if (conn->task == task)
- conn->task = NULL;
+ session->tt->cleanup_task(task);
+ task->state = ISCSI_TASK_FREE;
+ task->sc = NULL;
/*
* login task is preallocated so do not free
*/
@@ -408,9 +407,6 @@
__kfifo_put(session->cmdpool.queue, (void*)&task, sizeof(void*));
- if (conn->ping_task == task)
- conn->ping_task = NULL;
-
if (sc) {
task->sc = NULL;
/* SCSI eh reuses commands to verify us */
@@ -433,7 +429,7 @@
static void __iscsi_put_task(struct iscsi_task *task)
{
if (atomic_dec_and_test(&task->refcount))
- iscsi_complete_command(task);
+ iscsi_free_task(task);
}
void iscsi_put_task(struct iscsi_task *task)
@@ -446,26 +442,74 @@
}
EXPORT_SYMBOL_GPL(iscsi_put_task);
-/*
- * session lock must be held
+/**
+ * iscsi_complete_task - finish a task
+ * @task: iscsi cmd task
+ * @state: state to complete task with
+ *
+ * Must be called with session lock.
*/
-static void fail_command(struct iscsi_conn *conn, struct iscsi_task *task,
- int err)
+static void iscsi_complete_task(struct iscsi_task *task, int state)
{
- struct scsi_cmnd *sc;
+ struct iscsi_conn *conn = task->conn;
+ ISCSI_DBG_SESSION(conn->session,
+ "complete task itt 0x%x state %d sc %p\n",
+ task->itt, task->state, task->sc);
+ if (task->state == ISCSI_TASK_COMPLETED ||
+ task->state == ISCSI_TASK_ABRT_TMF ||
+ task->state == ISCSI_TASK_ABRT_SESS_RECOV)
+ return;
+ WARN_ON_ONCE(task->state == ISCSI_TASK_FREE);
+ task->state = state;
+
+ if (!list_empty(&task->running))
+ list_del_init(&task->running);
+
+ if (conn->task == task)
+ conn->task = NULL;
+
+ if (conn->ping_task == task)
+ conn->ping_task = NULL;
+
+ /* release get from queueing */
+ __iscsi_put_task(task);
+}
+
+/*
+ * session lock must be held and if not called for a task that is
+ * still pending or from the xmit thread, then xmit thread must
+ * be suspended.
+ */
+static void fail_scsi_task(struct iscsi_task *task, int err)
+{
+ struct iscsi_conn *conn = task->conn;
+ struct scsi_cmnd *sc;
+ int state;
+
+ /*
+ * if a command completes and we get a successful tmf response
+ * we will hit this because the scsi eh abort code does not take
+ * a ref to the task.
+ */
sc = task->sc;
if (!sc)
return;
- if (task->state == ISCSI_TASK_PENDING)
+ if (task->state == ISCSI_TASK_PENDING) {
/*
* cmd never made it to the xmit thread, so we should not count
* the cmd in the sequencing
*/
conn->session->queued_cmdsn--;
+ /* it was never sent so just complete like normal */
+ state = ISCSI_TASK_COMPLETED;
+ } else if (err == DID_TRANSPORT_DISRUPTED)
+ state = ISCSI_TASK_ABRT_SESS_RECOV;
+ else
+ state = ISCSI_TASK_ABRT_TMF;
- sc->result = err;
+ sc->result = err << 16;
if (!scsi_bidi_cmnd(sc))
scsi_set_resid(sc, scsi_bufflen(sc));
else {
@@ -473,10 +517,7 @@
scsi_in(sc)->resid = scsi_in(sc)->length;
}
- if (conn->task == task)
- conn->task = NULL;
- /* release ref from queuecommand */
- __iscsi_put_task(task);
+ iscsi_complete_task(task, state);
}
static int iscsi_prep_mgmt_task(struct iscsi_conn *conn,
@@ -516,7 +557,6 @@
session->state = ISCSI_STATE_LOGGING_OUT;
task->state = ISCSI_TASK_RUNNING;
- list_move_tail(&task->running, &conn->mgmt_run_list);
ISCSI_DBG_SESSION(session, "mgmtpdu [op 0x%x hdr->itt 0x%x "
"datalen %d]\n", hdr->opcode & ISCSI_OPCODE_MASK,
hdr->itt, task->data_count);
@@ -528,6 +568,7 @@
char *data, uint32_t data_size)
{
struct iscsi_session *session = conn->session;
+ struct iscsi_host *ihost = shost_priv(session->host);
struct iscsi_task *task;
itt_t itt;
@@ -544,6 +585,9 @@
*/
task = conn->login_task;
else {
+ if (session->state != ISCSI_STATE_LOGGED_IN)
+ return NULL;
+
BUG_ON(conn->c_stage == ISCSI_CONN_INITIAL_STAGE);
BUG_ON(conn->c_stage == ISCSI_CONN_STOPPED);
@@ -559,6 +603,8 @@
atomic_set(&task->refcount, 1);
task->conn = conn;
task->sc = NULL;
+ INIT_LIST_HEAD(&task->running);
+ task->state = ISCSI_TASK_PENDING;
if (data_size) {
memcpy(task->data, data, data_size);
@@ -566,11 +612,14 @@
} else
task->data_count = 0;
- if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
- iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
- "pdu for mgmt task.\n");
- goto requeue_task;
+ if (conn->session->tt->alloc_pdu) {
+ if (conn->session->tt->alloc_pdu(task, hdr->opcode)) {
+ iscsi_conn_printk(KERN_ERR, conn, "Could not allocate "
+ "pdu for mgmt task.\n");
+ goto free_task;
+ }
}
+
itt = task->hdr->itt;
task->hdr_len = sizeof(struct iscsi_hdr);
memcpy(task->hdr, hdr, sizeof(struct iscsi_hdr));
@@ -583,30 +632,22 @@
task->conn->session->age);
}
- INIT_LIST_HEAD(&task->running);
- list_add_tail(&task->running, &conn->mgmtqueue);
-
- if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+ if (!ihost->workq) {
if (iscsi_prep_mgmt_task(conn, task))
goto free_task;
if (session->tt->xmit_task(task))
goto free_task;
-
- } else
+ } else {
+ list_add_tail(&task->running, &conn->mgmtqueue);
iscsi_conn_queue_work(conn);
+ }
return task;
free_task:
__iscsi_put_task(task);
return NULL;
-
-requeue_task:
- if (task != conn->login_task)
- __kfifo_put(session->cmdpool.queue, (void*)&task,
- sizeof(void*));
- return NULL;
}
int iscsi_conn_send_pdu(struct iscsi_cls_conn *cls_conn, struct iscsi_hdr *hdr,
@@ -701,11 +742,10 @@
sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
}
out:
- ISCSI_DBG_SESSION(session, "done [sc %p res %d itt 0x%x]\n",
+ ISCSI_DBG_SESSION(session, "cmd rsp done [sc %p res %d itt 0x%x]\n",
sc, sc->result, task->itt);
conn->scsirsp_pdus_cnt++;
-
- __iscsi_put_task(task);
+ iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
}
/**
@@ -724,6 +764,7 @@
if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
return;
+ iscsi_update_cmdsn(conn->session, (struct iscsi_nopin *)hdr);
sc->result = (DID_OK << 16) | rhdr->cmd_status;
conn->exp_statsn = be32_to_cpu(rhdr->statsn) + 1;
if (rhdr->flags & (ISCSI_FLAG_DATA_UNDERFLOW |
@@ -738,8 +779,11 @@
sc->result = (DID_BAD_TARGET << 16) | rhdr->cmd_status;
}
+ ISCSI_DBG_SESSION(conn->session, "data in with status done "
+ "[sc %p res %d itt 0x%x]\n",
+ sc, sc->result, task->itt);
conn->scsirsp_pdus_cnt++;
- __iscsi_put_task(task);
+ iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
}
static void iscsi_tmf_rsp(struct iscsi_conn *conn, struct iscsi_hdr *hdr)
@@ -823,7 +867,7 @@
*
* The session lock must be held.
*/
-static struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
+struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *conn, itt_t itt)
{
struct iscsi_session *session = conn->session;
int i;
@@ -840,6 +884,7 @@
return session->cmds[i];
}
+EXPORT_SYMBOL_GPL(iscsi_itt_to_task);
/**
* __iscsi_complete_pdu - complete pdu
@@ -959,7 +1004,7 @@
}
iscsi_tmf_rsp(conn, hdr);
- __iscsi_put_task(task);
+ iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
break;
case ISCSI_OP_NOOP_IN:
iscsi_update_cmdsn(session, (struct iscsi_nopin*)hdr);
@@ -977,7 +1022,7 @@
goto recv_pdu;
mod_timer(&conn->transport_timer, jiffies + conn->recv_timeout);
- __iscsi_put_task(task);
+ iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
break;
default:
rc = ISCSI_ERR_BAD_OPCODE;
@@ -989,7 +1034,7 @@
recv_pdu:
if (iscsi_recv_pdu(conn->cls_conn, hdr, data, datalen))
rc = ISCSI_ERR_CONN_FAILED;
- __iscsi_put_task(task);
+ iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
return rc;
}
EXPORT_SYMBOL_GPL(__iscsi_complete_pdu);
@@ -1166,7 +1211,12 @@
{
struct iscsi_conn *conn = task->conn;
- list_move_tail(&task->running, &conn->requeue);
+ /*
+ * this may be on the requeue list already if the xmit_task callout
+ * is handling the r2ts while we are adding new ones
+ */
+ if (list_empty(&task->running))
+ list_add_tail(&task->running, &conn->requeue);
iscsi_conn_queue_work(conn);
}
EXPORT_SYMBOL_GPL(iscsi_requeue_task);
@@ -1206,6 +1256,7 @@
while (!list_empty(&conn->mgmtqueue)) {
conn->task = list_entry(conn->mgmtqueue.next,
struct iscsi_task, running);
+ list_del_init(&conn->task->running);
if (iscsi_prep_mgmt_task(conn, conn->task)) {
__iscsi_put_task(conn->task);
conn->task = NULL;
@@ -1217,23 +1268,26 @@
}
/* process pending command queue */
- while (!list_empty(&conn->xmitqueue)) {
+ while (!list_empty(&conn->cmdqueue)) {
if (conn->tmf_state == TMF_QUEUED)
break;
- conn->task = list_entry(conn->xmitqueue.next,
+ conn->task = list_entry(conn->cmdqueue.next,
struct iscsi_task, running);
+ list_del_init(&conn->task->running);
if (conn->session->state == ISCSI_STATE_LOGGING_OUT) {
- fail_command(conn, conn->task, DID_IMM_RETRY << 16);
+ fail_scsi_task(conn->task, DID_IMM_RETRY);
continue;
}
rc = iscsi_prep_scsi_cmd_pdu(conn->task);
if (rc) {
if (rc == -ENOMEM) {
+ list_add_tail(&conn->task->running,
+ &conn->cmdqueue);
conn->task = NULL;
goto again;
} else
- fail_command(conn, conn->task, DID_ABORT << 16);
+ fail_scsi_task(conn->task, DID_ABORT);
continue;
}
rc = iscsi_xmit_task(conn);
@@ -1260,8 +1314,8 @@
conn->task = list_entry(conn->requeue.next,
struct iscsi_task, running);
+ list_del_init(&conn->task->running);
conn->task->state = ISCSI_TASK_RUNNING;
- list_move_tail(conn->requeue.next, &conn->run_list);
rc = iscsi_xmit_task(conn);
if (rc)
goto again;
@@ -1328,6 +1382,7 @@
{
struct iscsi_cls_session *cls_session;
struct Scsi_Host *host;
+ struct iscsi_host *ihost;
int reason = 0;
struct iscsi_session *session;
struct iscsi_conn *conn;
@@ -1338,6 +1393,7 @@
sc->SCp.ptr = NULL;
host = sc->device->host;
+ ihost = shost_priv(host);
spin_unlock(host->host_lock);
cls_session = starget_to_session(scsi_target(sc->device));
@@ -1350,13 +1406,7 @@
goto fault;
}
- /*
- * ISCSI_STATE_FAILED is a temp. state. The recovery
- * code will decide what is best to do with command queued
- * during this time
- */
- if (session->state != ISCSI_STATE_LOGGED_IN &&
- session->state != ISCSI_STATE_FAILED) {
+ if (session->state != ISCSI_STATE_LOGGED_IN) {
/*
* to handle the race between when we set the recovery state
* and block the session we requeue here (commands could
@@ -1364,12 +1414,15 @@
* up because the block code is not locked)
*/
switch (session->state) {
+ case ISCSI_STATE_FAILED:
case ISCSI_STATE_IN_RECOVERY:
reason = FAILURE_SESSION_IN_RECOVERY;
- goto reject;
+ sc->result = DID_IMM_RETRY << 16;
+ break;
case ISCSI_STATE_LOGGING_OUT:
reason = FAILURE_SESSION_LOGGING_OUT;
- goto reject;
+ sc->result = DID_IMM_RETRY << 16;
+ break;
case ISCSI_STATE_RECOVERY_FAILED:
reason = FAILURE_SESSION_RECOVERY_TIMEOUT;
sc->result = DID_TRANSPORT_FAILFAST << 16;
@@ -1402,9 +1455,8 @@
reason = FAILURE_OOM;
goto reject;
}
- list_add_tail(&task->running, &conn->xmitqueue);
- if (session->tt->caps & CAP_DATA_PATH_OFFLOAD) {
+ if (!ihost->workq) {
reason = iscsi_prep_scsi_cmd_pdu(task);
if (reason) {
if (reason == -ENOMEM) {
@@ -1419,8 +1471,10 @@
reason = FAILURE_SESSION_NOT_READY;
goto prepd_reject;
}
- } else
+ } else {
+ list_add_tail(&task->running, &conn->cmdqueue);
iscsi_conn_queue_work(conn);
+ }
session->queued_cmdsn++;
spin_unlock(&session->lock);
@@ -1429,7 +1483,7 @@
prepd_reject:
sc->scsi_done = NULL;
- iscsi_complete_command(task);
+ iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
reject:
spin_unlock(&session->lock);
ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n",
@@ -1439,7 +1493,7 @@
prepd_fault:
sc->scsi_done = NULL;
- iscsi_complete_command(task);
+ iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
fault:
spin_unlock(&session->lock);
ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n",
@@ -1608,44 +1662,24 @@
* Fail commands. session lock held and recv side suspended and xmit
* thread flushed
*/
-static void fail_all_commands(struct iscsi_conn *conn, unsigned lun,
- int error)
+static void fail_scsi_tasks(struct iscsi_conn *conn, unsigned lun,
+ int error)
{
- struct iscsi_task *task, *tmp;
+ struct iscsi_task *task;
+ int i;
- if (conn->task) {
- if (lun == -1 ||
- (conn->task->sc && conn->task->sc->device->lun == lun))
- conn->task = NULL;
- }
+ for (i = 0; i < conn->session->cmds_max; i++) {
+ task = conn->session->cmds[i];
+ if (!task->sc || task->state == ISCSI_TASK_FREE)
+ continue;
- /* flush pending */
- list_for_each_entry_safe(task, tmp, &conn->xmitqueue, running) {
- if (lun == task->sc->device->lun || lun == -1) {
- ISCSI_DBG_SESSION(conn->session,
- "failing pending sc %p itt 0x%x\n",
- task->sc, task->itt);
- fail_command(conn, task, error << 16);
- }
- }
+ if (lun != -1 && lun != task->sc->device->lun)
+ continue;
- list_for_each_entry_safe(task, tmp, &conn->requeue, running) {
- if (lun == task->sc->device->lun || lun == -1) {
- ISCSI_DBG_SESSION(conn->session,
- "failing requeued sc %p itt 0x%x\n",
- task->sc, task->itt);
- fail_command(conn, task, error << 16);
- }
- }
-
- /* fail all other running */
- list_for_each_entry_safe(task, tmp, &conn->run_list, running) {
- if (lun == task->sc->device->lun || lun == -1) {
- ISCSI_DBG_SESSION(conn->session,
- "failing in progress sc %p itt 0x%x\n",
- task->sc, task->itt);
- fail_command(conn, task, error << 16);
- }
+ ISCSI_DBG_SESSION(conn->session,
+ "failing sc %p itt 0x%x state %d\n",
+ task->sc, task->itt, task->state);
+ fail_scsi_task(task, error);
}
}
@@ -1655,7 +1689,7 @@
struct iscsi_host *ihost = shost_priv(shost);
set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
- if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
+ if (ihost->workq)
flush_workqueue(ihost->workq);
}
EXPORT_SYMBOL_GPL(iscsi_suspend_tx);
@@ -1663,8 +1697,23 @@
static void iscsi_start_tx(struct iscsi_conn *conn)
{
clear_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
- if (!(conn->session->tt->caps & CAP_DATA_PATH_OFFLOAD))
- iscsi_conn_queue_work(conn);
+ iscsi_conn_queue_work(conn);
+}
+
+/*
+ * We want to make sure a ping is in flight. It has timed out.
+ * And we are not busy processing a pdu that is making
+ * progress but got started before the ping and is taking a while
+ * to complete so the ping is just stuck behind it in a queue.
+ */
+static int iscsi_has_ping_timed_out(struct iscsi_conn *conn)
+{
+ if (conn->ping_task &&
+ time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
+ (conn->ping_timeout * HZ), jiffies))
+ return 1;
+ else
+ return 0;
}
static enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *scmd)
@@ -1702,16 +1751,20 @@
* if the ping timedout then we are in the middle of cleaning up
* and can let the iscsi eh handle it
*/
- if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ) +
- (conn->ping_timeout * HZ), jiffies))
+ if (iscsi_has_ping_timed_out(conn)) {
rc = BLK_EH_RESET_TIMER;
+ goto done;
+ }
/*
* if we are about to check the transport then give the command
* more time
*/
if (time_before_eq(conn->last_recv + (conn->recv_timeout * HZ),
- jiffies))
+ jiffies)) {
rc = BLK_EH_RESET_TIMER;
+ goto done;
+ }
+
/* if in the middle of checking the transport then give us more time */
if (conn->ping_task)
rc = BLK_EH_RESET_TIMER;
@@ -1738,13 +1791,13 @@
recv_timeout *= HZ;
last_recv = conn->last_recv;
- if (conn->ping_task &&
- time_before_eq(conn->last_ping + (conn->ping_timeout * HZ),
- jiffies)) {
+
+ if (iscsi_has_ping_timed_out(conn)) {
iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
- "expired, last rx %lu, last ping %lu, "
- "now %lu\n", conn->ping_timeout, last_recv,
- conn->last_ping, jiffies);
+ "expired, recv timeout %d, last rx %lu, "
+ "last ping %lu, now %lu\n",
+ conn->ping_timeout, conn->recv_timeout,
+ last_recv, conn->last_ping, jiffies);
spin_unlock(&session->lock);
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
return;
@@ -1788,6 +1841,8 @@
cls_session = starget_to_session(scsi_target(sc->device));
session = cls_session->dd_data;
+ ISCSI_DBG_SESSION(session, "aborting sc %p\n", sc);
+
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
/*
@@ -1810,6 +1865,8 @@
sc->SCp.phase != session->age) {
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
+ ISCSI_DBG_SESSION(session, "failing abort due to dropped "
+ "session.\n");
return FAILED;
}
@@ -1829,7 +1886,7 @@
}
if (task->state == ISCSI_TASK_PENDING) {
- fail_command(conn, task, DID_ABORT << 16);
+ fail_scsi_task(task, DID_ABORT);
goto success;
}
@@ -1860,7 +1917,7 @@
* then sent more data for the cmd.
*/
spin_lock(&session->lock);
- fail_command(conn, task, DID_ABORT << 16);
+ fail_scsi_task(task, DID_ABORT);
conn->tmf_state = TMF_INITIAL;
spin_unlock(&session->lock);
iscsi_start_tx(conn);
@@ -1967,7 +2024,7 @@
iscsi_suspend_tx(conn);
spin_lock_bh(&session->lock);
- fail_all_commands(conn, sc->device->lun, DID_ERROR);
+ fail_scsi_tasks(conn, sc->device->lun, DID_ERROR);
conn->tmf_state = TMF_INITIAL;
spin_unlock_bh(&session->lock);
@@ -2274,6 +2331,7 @@
if (cmd_task_size)
task->dd_data = &task[1];
task->itt = cmd_i;
+ task->state = ISCSI_TASK_FREE;
INIT_LIST_HEAD(&task->running);
}
@@ -2360,10 +2418,8 @@
conn->transport_timer.data = (unsigned long)conn;
conn->transport_timer.function = iscsi_check_transport_timeouts;
- INIT_LIST_HEAD(&conn->run_list);
- INIT_LIST_HEAD(&conn->mgmt_run_list);
INIT_LIST_HEAD(&conn->mgmtqueue);
- INIT_LIST_HEAD(&conn->xmitqueue);
+ INIT_LIST_HEAD(&conn->cmdqueue);
INIT_LIST_HEAD(&conn->requeue);
INIT_WORK(&conn->xmitwork, iscsi_xmitworker);
@@ -2531,27 +2587,28 @@
EXPORT_SYMBOL_GPL(iscsi_conn_start);
static void
-flush_control_queues(struct iscsi_session *session, struct iscsi_conn *conn)
+fail_mgmt_tasks(struct iscsi_session *session, struct iscsi_conn *conn)
{
- struct iscsi_task *task, *tmp;
+ struct iscsi_task *task;
+ int i, state;
- /* handle pending */
- list_for_each_entry_safe(task, tmp, &conn->mgmtqueue, running) {
- ISCSI_DBG_SESSION(session, "flushing pending mgmt task "
- "itt 0x%x\n", task->itt);
- /* release ref from prep task */
- __iscsi_put_task(task);
+ for (i = 0; i < conn->session->cmds_max; i++) {
+ task = conn->session->cmds[i];
+ if (task->sc)
+ continue;
+
+ if (task->state == ISCSI_TASK_FREE)
+ continue;
+
+ ISCSI_DBG_SESSION(conn->session,
+ "failing mgmt itt 0x%x state %d\n",
+ task->itt, task->state);
+ state = ISCSI_TASK_ABRT_SESS_RECOV;
+ if (task->state == ISCSI_TASK_PENDING)
+ state = ISCSI_TASK_COMPLETED;
+ iscsi_complete_task(task, state);
+
}
-
- /* handle running */
- list_for_each_entry_safe(task, tmp, &conn->mgmt_run_list, running) {
- ISCSI_DBG_SESSION(session, "flushing running mgmt task "
- "itt 0x%x\n", task->itt);
- /* release ref from prep task */
- __iscsi_put_task(task);
- }
-
- conn->task = NULL;
}
static void iscsi_start_session_recovery(struct iscsi_session *session,
@@ -2559,8 +2616,6 @@
{
int old_stop_stage;
- del_timer_sync(&conn->transport_timer);
-
mutex_lock(&session->eh_mutex);
spin_lock_bh(&session->lock);
if (conn->stop_stage == STOP_CONN_TERM) {
@@ -2578,13 +2633,17 @@
session->state = ISCSI_STATE_TERMINATE;
else if (conn->stop_stage != STOP_CONN_RECOVER)
session->state = ISCSI_STATE_IN_RECOVERY;
+ spin_unlock_bh(&session->lock);
+ del_timer_sync(&conn->transport_timer);
+ iscsi_suspend_tx(conn);
+
+ spin_lock_bh(&session->lock);
old_stop_stage = conn->stop_stage;
conn->stop_stage = flag;
conn->c_stage = ISCSI_CONN_STOPPED;
spin_unlock_bh(&session->lock);
- iscsi_suspend_tx(conn);
/*
* for connection level recovery we should not calculate
* header digest. conn->hdr_size used for optimization
@@ -2605,11 +2664,8 @@
* flush queues.
*/
spin_lock_bh(&session->lock);
- if (flag == STOP_CONN_RECOVER)
- fail_all_commands(conn, -1, DID_TRANSPORT_DISRUPTED);
- else
- fail_all_commands(conn, -1, DID_ERROR);
- flush_control_queues(session, conn);
+ fail_scsi_tasks(conn, -1, DID_TRANSPORT_DISRUPTED);
+ fail_mgmt_tasks(session, conn);
spin_unlock_bh(&session->lock);
mutex_unlock(&session->eh_mutex);
}
@@ -2651,6 +2707,23 @@
}
EXPORT_SYMBOL_GPL(iscsi_conn_bind);
+static int iscsi_switch_str_param(char **param, char *new_val_buf)
+{
+ char *new_val;
+
+ if (*param) {
+ if (!strcmp(*param, new_val_buf))
+ return 0;
+ }
+
+ new_val = kstrdup(new_val_buf, GFP_NOIO);
+ if (!new_val)
+ return -ENOMEM;
+
+ kfree(*param);
+ *param = new_val;
+ return 0;
+}
int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
enum iscsi_param param, char *buf, int buflen)
@@ -2723,38 +2796,15 @@
sscanf(buf, "%u", &conn->exp_statsn);
break;
case ISCSI_PARAM_USERNAME:
- kfree(session->username);
- session->username = kstrdup(buf, GFP_KERNEL);
- if (!session->username)
- return -ENOMEM;
- break;
+ return iscsi_switch_str_param(&session->username, buf);
case ISCSI_PARAM_USERNAME_IN:
- kfree(session->username_in);
- session->username_in = kstrdup(buf, GFP_KERNEL);
- if (!session->username_in)
- return -ENOMEM;
- break;
+ return iscsi_switch_str_param(&session->username_in, buf);
case ISCSI_PARAM_PASSWORD:
- kfree(session->password);
- session->password = kstrdup(buf, GFP_KERNEL);
- if (!session->password)
- return -ENOMEM;
- break;
+ return iscsi_switch_str_param(&session->password, buf);
case ISCSI_PARAM_PASSWORD_IN:
- kfree(session->password_in);
- session->password_in = kstrdup(buf, GFP_KERNEL);
- if (!session->password_in)
- return -ENOMEM;
- break;
+ return iscsi_switch_str_param(&session->password_in, buf);
case ISCSI_PARAM_TARGET_NAME:
- /* this should not change between logins */
- if (session->targetname)
- break;
-
- session->targetname = kstrdup(buf, GFP_KERNEL);
- if (!session->targetname)
- return -ENOMEM;
- break;
+ return iscsi_switch_str_param(&session->targetname, buf);
case ISCSI_PARAM_TPGT:
sscanf(buf, "%d", &session->tpgt);
break;
@@ -2762,25 +2812,11 @@
sscanf(buf, "%d", &conn->persistent_port);
break;
case ISCSI_PARAM_PERSISTENT_ADDRESS:
- /*
- * this is the address returned in discovery so it should
- * not change between logins.
- */
- if (conn->persistent_address)
- break;
-
- conn->persistent_address = kstrdup(buf, GFP_KERNEL);
- if (!conn->persistent_address)
- return -ENOMEM;
- break;
+ return iscsi_switch_str_param(&conn->persistent_address, buf);
case ISCSI_PARAM_IFACE_NAME:
- if (!session->ifacename)
- session->ifacename = kstrdup(buf, GFP_KERNEL);
- break;
+ return iscsi_switch_str_param(&session->ifacename, buf);
case ISCSI_PARAM_INITIATOR_NAME:
- if (!session->initiatorname)
- session->initiatorname = kstrdup(buf, GFP_KERNEL);
- break;
+ return iscsi_switch_str_param(&session->initiatorname, buf);
default:
return -ENOSYS;
}
@@ -2851,10 +2887,7 @@
len = sprintf(buf, "%s\n", session->ifacename);
break;
case ISCSI_PARAM_INITIATOR_NAME:
- if (!session->initiatorname)
- len = sprintf(buf, "%s\n", "unknown");
- else
- len = sprintf(buf, "%s\n", session->initiatorname);
+ len = sprintf(buf, "%s\n", session->initiatorname);
break;
default:
return -ENOSYS;
@@ -2920,29 +2953,16 @@
switch (param) {
case ISCSI_HOST_PARAM_NETDEV_NAME:
- if (!ihost->netdev)
- len = sprintf(buf, "%s\n", "default");
- else
- len = sprintf(buf, "%s\n", ihost->netdev);
+ len = sprintf(buf, "%s\n", ihost->netdev);
break;
case ISCSI_HOST_PARAM_HWADDRESS:
- if (!ihost->hwaddress)
- len = sprintf(buf, "%s\n", "default");
- else
- len = sprintf(buf, "%s\n", ihost->hwaddress);
+ len = sprintf(buf, "%s\n", ihost->hwaddress);
break;
case ISCSI_HOST_PARAM_INITIATOR_NAME:
- if (!ihost->initiatorname)
- len = sprintf(buf, "%s\n", "unknown");
- else
- len = sprintf(buf, "%s\n", ihost->initiatorname);
+ len = sprintf(buf, "%s\n", ihost->initiatorname);
break;
case ISCSI_HOST_PARAM_IPADDRESS:
- if (!strlen(ihost->local_address))
- len = sprintf(buf, "%s\n", "unknown");
- else
- len = sprintf(buf, "%s\n",
- ihost->local_address);
+ len = sprintf(buf, "%s\n", ihost->local_address);
break;
default:
return -ENOSYS;
@@ -2959,17 +2979,11 @@
switch (param) {
case ISCSI_HOST_PARAM_NETDEV_NAME:
- if (!ihost->netdev)
- ihost->netdev = kstrdup(buf, GFP_KERNEL);
- break;
+ return iscsi_switch_str_param(&ihost->netdev, buf);
case ISCSI_HOST_PARAM_HWADDRESS:
- if (!ihost->hwaddress)
- ihost->hwaddress = kstrdup(buf, GFP_KERNEL);
- break;
+ return iscsi_switch_str_param(&ihost->hwaddress, buf);
case ISCSI_HOST_PARAM_INITIATOR_NAME:
- if (!ihost->initiatorname)
- ihost->initiatorname = kstrdup(buf, GFP_KERNEL);
- break;
+ return iscsi_switch_str_param(&ihost->initiatorname, buf);
default:
return -ENOSYS;
}
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index b579ca9..2bc0709 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -440,8 +440,8 @@
struct iscsi_tcp_task *tcp_task = task->dd_data;
struct iscsi_r2t_info *r2t;
- /* nothing to do for mgmt or pending tasks */
- if (!task->sc || task->state == ISCSI_TASK_PENDING)
+ /* nothing to do for mgmt */
+ if (!task->sc)
return;
/* flush task's r2t queues */
@@ -473,7 +473,13 @@
int datasn = be32_to_cpu(rhdr->datasn);
unsigned total_in_length = scsi_in(task->sc)->length;
- iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+ /*
+ * lib iscsi will update this in the completion handling if there
+ * is status.
+ */
+ if (!(rhdr->flags & ISCSI_FLAG_DATA_STATUS))
+ iscsi_update_cmdsn(conn->session, (struct iscsi_nopin*)rhdr);
+
if (tcp_conn->in.datalen == 0)
return 0;
@@ -857,6 +863,12 @@
int rc = 0;
ISCSI_DBG_TCP(conn, "in %d bytes\n", skb->len - offset);
+ /*
+ * Update for each skb instead of pdu, because over slow networks a
+ * data_in's data could take a while to read in. We also want to
+ * account for r2ts.
+ */
+ conn->last_recv = jiffies;
if (unlikely(conn->suspend_rx)) {
ISCSI_DBG_TCP(conn, "Rx suspended!\n");
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 1105f9a..5405698 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -23,6 +23,13 @@
struct lpfc_sli2_slim;
+#define LPFC_PCI_DEV_LP 0x1
+#define LPFC_PCI_DEV_OC 0x2
+
+#define LPFC_SLI_REV2 2
+#define LPFC_SLI_REV3 3
+#define LPFC_SLI_REV4 4
+
#define LPFC_MAX_TARGET 4096 /* max number of targets supported */
#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
requests */
@@ -98,9 +105,11 @@
};
struct hbq_dmabuf {
+ struct lpfc_dmabuf hbuf;
struct lpfc_dmabuf dbuf;
uint32_t size;
uint32_t tag;
+ struct lpfc_rcqe rcqe;
};
/* Priority bit. Set value to exceed low water mark in lpfc_mem. */
@@ -134,7 +143,10 @@
} rev;
struct {
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd2 :24; /* Reserved */
+ uint32_t rsvd3 :19; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cbg : 1; /* Configure BlockGuard */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t csah : 1; /* Configure Synchronous Abort Handling */
@@ -152,7 +164,10 @@
uint32_t csah : 1; /* Configure Synchronous Abort Handling */
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */
- uint32_t rsvd2 :24; /* Reserved */
+ uint32_t cbg : 1; /* Configure BlockGuard */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd3 :19; /* Reserved */
#endif
} sli3Feat;
} lpfc_vpd_t;
@@ -264,8 +279,8 @@
};
struct lpfc_vport {
- struct list_head listentry;
struct lpfc_hba *phba;
+ struct list_head listentry;
uint8_t port_type;
#define LPFC_PHYSICAL_PORT 1
#define LPFC_NPIV_PORT 2
@@ -273,6 +288,9 @@
enum discovery_state port_state;
uint16_t vpi;
+ uint16_t vfi;
+ uint8_t vfi_state;
+#define LPFC_VFI_REGISTERED 0x1
uint32_t fc_flag; /* FC flags */
/* Several of these flags are HBA centric and should be moved to
@@ -385,6 +403,9 @@
#endif
uint8_t stat_data_enabled;
uint8_t stat_data_blocked;
+ struct list_head rcv_buffer_list;
+ uint32_t vport_flag;
+#define STATIC_VPORT 1
};
struct hbq_s {
@@ -420,8 +441,66 @@
};
struct lpfc_hba {
+ /* SCSI interface function jump table entries */
+ int (*lpfc_new_scsi_buf)
+ (struct lpfc_vport *, int);
+ struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
+ (struct lpfc_hba *);
+ int (*lpfc_scsi_prep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_scsi_unprep_dma_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_release_scsi_buf)
+ (struct lpfc_hba *, struct lpfc_scsi_buf *);
+ void (*lpfc_rampdown_queue_depth)
+ (struct lpfc_hba *);
+ void (*lpfc_scsi_prep_cmnd)
+ (struct lpfc_vport *, struct lpfc_scsi_buf *,
+ struct lpfc_nodelist *);
+ int (*lpfc_scsi_prep_task_mgmt_cmd)
+ (struct lpfc_vport *, struct lpfc_scsi_buf *,
+ unsigned int, uint8_t);
+
+ /* IOCB interface function jump table entries */
+ int (*__lpfc_sli_issue_iocb)
+ (struct lpfc_hba *, uint32_t,
+ struct lpfc_iocbq *, uint32_t);
+ void (*__lpfc_sli_release_iocbq)(struct lpfc_hba *,
+ struct lpfc_iocbq *);
+ int (*lpfc_hba_down_post)(struct lpfc_hba *phba);
+
+
+ IOCB_t * (*lpfc_get_iocb_from_iocbq)
+ (struct lpfc_iocbq *);
+ void (*lpfc_scsi_cmd_iocb_cmpl)
+ (struct lpfc_hba *, struct lpfc_iocbq *, struct lpfc_iocbq *);
+
+ /* MBOX interface function jump table entries */
+ int (*lpfc_sli_issue_mbox)
+ (struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
+ /* Slow-path IOCB process function jump table entries */
+ void (*lpfc_sli_handle_slow_ring_event)
+ (struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ uint32_t mask);
+ /* INIT device interface function jump table entries */
+ int (*lpfc_sli_hbq_to_firmware)
+ (struct lpfc_hba *, uint32_t, struct hbq_dmabuf *);
+ int (*lpfc_sli_brdrestart)
+ (struct lpfc_hba *);
+ int (*lpfc_sli_brdready)
+ (struct lpfc_hba *, uint32_t);
+ void (*lpfc_handle_eratt)
+ (struct lpfc_hba *);
+ void (*lpfc_stop_port)
+ (struct lpfc_hba *);
+
+
+ /* SLI4 specific HBA data structure */
+ struct lpfc_sli4_hba sli4_hba;
+
struct lpfc_sli sli;
- uint32_t sli_rev; /* SLI2 or SLI3 */
+ uint8_t pci_dev_grp; /* lpfc PCI dev group: 0x0, 0x1, 0x2,... */
+ uint32_t sli_rev; /* SLI2, SLI3, or SLI4 */
uint32_t sli3_options; /* Mask of enabled SLI3 options */
#define LPFC_SLI3_HBQ_ENABLED 0x01
#define LPFC_SLI3_NPIV_ENABLED 0x02
@@ -429,6 +508,7 @@
#define LPFC_SLI3_CRP_ENABLED 0x08
#define LPFC_SLI3_INB_ENABLED 0x10
#define LPFC_SLI3_BG_ENABLED 0x20
+#define LPFC_SLI3_DSS_ENABLED 0x40
uint32_t iocb_cmd_size;
uint32_t iocb_rsp_size;
@@ -442,8 +522,13 @@
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
-
-#define DEFER_ERATT 0x4 /* Deferred error attention in progress */
+#define DEFER_ERATT 0x2 /* Deferred error attention in progress */
+#define HBA_FCOE_SUPPORT 0x4 /* HBA function supports FCOE */
+#define HBA_RECEIVE_BUFFER 0x8 /* Rcv buffer posted to worker thread */
+#define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
+#define FCP_XRI_ABORT_EVENT 0x20
+#define ELS_XRI_ABORT_EVENT 0x40
+#define ASYNC_EVENT 0x80
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
@@ -502,6 +587,9 @@
uint32_t cfg_poll;
uint32_t cfg_poll_tmo;
uint32_t cfg_use_msi;
+ uint32_t cfg_fcp_imax;
+ uint32_t cfg_fcp_wq_count;
+ uint32_t cfg_fcp_eq_count;
uint32_t cfg_sg_seg_cnt;
uint32_t cfg_prot_sg_seg_cnt;
uint32_t cfg_sg_dma_buf_size;
@@ -511,6 +599,8 @@
uint32_t cfg_enable_hba_reset;
uint32_t cfg_enable_hba_heartbeat;
uint32_t cfg_enable_bg;
+ uint32_t cfg_enable_fip;
+ uint32_t cfg_log_verbose;
lpfc_vpd_t vpd; /* vital product data */
@@ -526,11 +616,12 @@
unsigned long data_flags;
uint32_t hbq_in_use; /* HBQs in use flag */
- struct list_head hbqbuf_in_list; /* in-fly hbq buffer list */
+ struct list_head rb_pend_list; /* Received buffers to be processed */
uint32_t hbq_count; /* Count of configured HBQs */
struct hbq_s hbqs[LPFC_MAX_HBQS]; /* local copy of hbq indicies */
unsigned long pci_bar0_map; /* Physical address for PCI BAR0 */
+ unsigned long pci_bar1_map; /* Physical address for PCI BAR1 */
unsigned long pci_bar2_map; /* Physical address for PCI BAR2 */
void __iomem *slim_memmap_p; /* Kernel memory mapped address for
PCI BAR0 */
@@ -593,7 +684,8 @@
/* pci_mem_pools */
struct pci_pool *lpfc_scsi_dma_buf_pool;
struct pci_pool *lpfc_mbuf_pool;
- struct pci_pool *lpfc_hbq_pool;
+ struct pci_pool *lpfc_hrb_pool; /* header receive buffer pool */
+ struct pci_pool *lpfc_drb_pool; /* data receive buffer pool */
struct lpfc_dma_pool lpfc_mbuf_safety_pool;
mempool_t *mbox_mem_pool;
@@ -609,6 +701,14 @@
struct lpfc_vport *pport; /* physical lpfc_vport pointer */
uint16_t max_vpi; /* Maximum virtual nports */
#define LPFC_MAX_VPI 0xFFFF /* Max number of VPI supported */
+ uint16_t max_vports; /*
+ * For IOV HBAs max_vpi can change
+ * after a reset. max_vports is max
+ * number of vports present. This can
+ * be greater than max_vpi.
+ */
+ uint16_t vpi_base;
+ uint16_t vfi_base;
unsigned long *vpi_bmask; /* vpi allocation table */
/* Data structure used by fabric iocb scheduler */
@@ -667,6 +767,11 @@
/* Maximum number of events that can be outstanding at any time*/
#define LPFC_MAX_EVT_COUNT 512
atomic_t fast_event_count;
+ struct lpfc_fcf fcf;
+ uint8_t fc_map[3];
+ uint8_t valid_vlan;
+ uint16_t vlan_id;
+ struct list_head fcf_conn_rec_list;
};
static inline struct Scsi_Host *
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c14f0cb..d73e677 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -30,8 +30,10 @@
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -505,12 +507,14 @@
return -ENOMEM;
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
- pmboxq->mb.mbxCommand = MBX_DOWN_LINK;
- pmboxq->mb.mbxOwner = OWN_HOST;
+ pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
+ pmboxq->u.mb.mbxOwner = OWN_HOST;
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
- if ((mbxstatus == MBX_SUCCESS) && (pmboxq->mb.mbxStatus == 0)) {
+ if ((mbxstatus == MBX_SUCCESS) &&
+ (pmboxq->u.mb.mbxStatus == 0 ||
+ pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
lpfc_init_link(phba, pmboxq, phba->cfg_topology,
phba->cfg_link_speed);
@@ -789,7 +793,8 @@
uint32_t *mrpi, uint32_t *arpi,
uint32_t *mvpi, uint32_t *avpi)
{
- struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_mbx_read_config *rd_config;
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
int rc = 0;
@@ -800,7 +805,7 @@
*/
if (phba->link_state < LPFC_LINK_DOWN ||
!phba->mbox_mem_pool ||
- (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+ (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
return 0;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -811,13 +816,13 @@
return 0;
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
- pmb = &pmboxq->mb;
+ pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_CONFIG;
pmb->mbxOwner = OWN_HOST;
pmboxq->context1 = NULL;
if ((phba->pport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = MBX_NOT_FINISHED;
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -828,18 +833,37 @@
return 0;
}
- if (mrpi)
- *mrpi = pmb->un.varRdConfig.max_rpi;
- if (arpi)
- *arpi = pmb->un.varRdConfig.avail_rpi;
- if (mxri)
- *mxri = pmb->un.varRdConfig.max_xri;
- if (axri)
- *axri = pmb->un.varRdConfig.avail_xri;
- if (mvpi)
- *mvpi = pmb->un.varRdConfig.max_vpi;
- if (avpi)
- *avpi = pmb->un.varRdConfig.avail_vpi;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rd_config = &pmboxq->u.mqe.un.rd_config;
+ if (mrpi)
+ *mrpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+ if (arpi)
+ *arpi = bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.rpi_used;
+ if (mxri)
+ *mxri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+ if (axri)
+ *axri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.xri_used;
+ if (mvpi)
+ *mvpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+ if (avpi)
+ *avpi = bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config) -
+ phba->sli4_hba.max_cfg_param.vpi_used;
+ } else {
+ if (mrpi)
+ *mrpi = pmb->un.varRdConfig.max_rpi;
+ if (arpi)
+ *arpi = pmb->un.varRdConfig.avail_rpi;
+ if (mxri)
+ *mxri = pmb->un.varRdConfig.max_xri;
+ if (axri)
+ *axri = pmb->un.varRdConfig.avail_xri;
+ if (mvpi)
+ *mvpi = pmb->un.varRdConfig.max_vpi;
+ if (avpi)
+ *avpi = pmb->un.varRdConfig.avail_vpi;
+ }
mempool_free(pmboxq, phba->mbox_mem_pool);
return 1;
@@ -2021,22 +2045,9 @@
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
# deluged with LOTS of information.
# You can set a bit mask to record specific types of verbose messages:
-#
-# LOG_ELS 0x1 ELS events
-# LOG_DISCOVERY 0x2 Link discovery events
-# LOG_MBOX 0x4 Mailbox events
-# LOG_INIT 0x8 Initialization events
-# LOG_LINK_EVENT 0x10 Link events
-# LOG_FCP 0x40 FCP traffic history
-# LOG_NODE 0x80 Node table events
-# LOG_BG 0x200 BlockBuard events
-# LOG_MISC 0x400 Miscellaneous events
-# LOG_SLI 0x800 SLI events
-# LOG_FCP_ERROR 0x1000 Only log FCP errors
-# LOG_LIBDFC 0x2000 LIBDFC events
-# LOG_ALL_MSG 0xffff LOG all messages
+# See lpfc_logmsh.h for definitions.
*/
-LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffff,
+LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
"Verbose logging bit-mask");
/*
@@ -2266,6 +2277,36 @@
static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
lpfc_topology_show, lpfc_topology_store);
+/**
+ * lpfc_static_vport_show: Read callback function for
+ * lpfc_static_vport sysfs file.
+ * @dev: Pointer to class device object.
+ * @attr: device attribute structure.
+ * @buf: Data buffer.
+ *
+ * This function is the read call back function for
+ * lpfc_static_vport sysfs file. The lpfc_static_vport
+ * sysfs file report the mageability of the vport.
+ **/
+static ssize_t
+lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ if (vport->vport_flag & STATIC_VPORT)
+ sprintf(buf, "1\n");
+ else
+ sprintf(buf, "0\n");
+
+ return strlen(buf);
+}
+
+/*
+ * Sysfs attribute to control the statistical data collection.
+ */
+static DEVICE_ATTR(lpfc_static_vport, S_IRUGO,
+ lpfc_static_vport_show, NULL);
/**
* lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
@@ -2341,7 +2382,7 @@
if (vports == NULL)
return -ENOMEM;
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
v_shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(v_shost->host_lock);
/* Block and reset data collection */
@@ -2356,7 +2397,7 @@
phba->bucket_base = base;
phba->bucket_step = step;
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
v_shost = lpfc_shost_from_vport(vports[i]);
/* Unblock data collection */
@@ -2373,7 +2414,7 @@
if (vports == NULL)
return -ENOMEM;
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
v_shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
vports[i]->stat_data_blocked = 1;
@@ -2844,15 +2885,39 @@
/*
# lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
# support this feature
-# 0 = MSI disabled
+# 0 = MSI disabled (default)
# 1 = MSI enabled
-# 2 = MSI-X enabled (default)
-# Value range is [0,2]. Default value is 2.
+# 2 = MSI-X enabled
+# Value range is [0,2]. Default value is 0.
*/
-LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
+LPFC_ATTR_R(use_msi, 0, 0, 2, "Use Message Signaled Interrupts (1) or "
"MSI-X (2), if possible");
/*
+# lpfc_fcp_imax: Set the maximum number of fast-path FCP interrupts per second
+#
+# Value range is [636,651042]. Default value is 10000.
+*/
+LPFC_ATTR_R(fcp_imax, LPFC_FP_DEF_IMAX, LPFC_MIM_IMAX, LPFC_DMULT_CONST,
+ "Set the maximum number of fast-path FCP interrupts per second");
+
+/*
+# lpfc_fcp_wq_count: Set the number of fast-path FCP work queues
+#
+# Value range is [1,31]. Default value is 4.
+*/
+LPFC_ATTR_R(fcp_wq_count, LPFC_FP_WQN_DEF, LPFC_FP_WQN_MIN, LPFC_FP_WQN_MAX,
+ "Set the number of fast-path FCP work queues, if possible");
+
+/*
+# lpfc_fcp_eq_count: Set the number of fast-path FCP event queues
+#
+# Value range is [1,7]. Default value is 1.
+*/
+LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
+ "Set the number of fast-path FCP event queues, if possible");
+
+/*
# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
# 0 = HBA resets disabled
# 1 = HBA resets enabled (default)
@@ -2876,6 +2941,14 @@
*/
LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
+/*
+# lpfc_enable_fip: When set, FIP is required to start discovery. If not
+# set, the driver will add an FCF record manually if the port has no
+# FCF records available and start discovery.
+# Value range is [0,1]. Default value is 1 (enabled)
+*/
+LPFC_ATTR_RW(enable_fip, 0, 0, 1, "Enable FIP Discovery");
+
/*
# lpfc_prot_mask: i
@@ -2942,6 +3015,7 @@
&dev_attr_lpfc_peer_port_login,
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
+ &dev_attr_lpfc_enable_fip,
&dev_attr_lpfc_fcp_class,
&dev_attr_lpfc_use_adisc,
&dev_attr_lpfc_ack0,
@@ -2969,6 +3043,9 @@
&dev_attr_lpfc_poll,
&dev_attr_lpfc_poll_tmo,
&dev_attr_lpfc_use_msi,
+ &dev_attr_lpfc_fcp_imax,
+ &dev_attr_lpfc_fcp_wq_count,
+ &dev_attr_lpfc_fcp_eq_count,
&dev_attr_lpfc_enable_bg,
&dev_attr_lpfc_soft_wwnn,
&dev_attr_lpfc_soft_wwpn,
@@ -2991,6 +3068,7 @@
&dev_attr_lpfc_lun_queue_depth,
&dev_attr_lpfc_nodev_tmo,
&dev_attr_lpfc_devloss_tmo,
+ &dev_attr_lpfc_enable_fip,
&dev_attr_lpfc_hba_queue_depth,
&dev_attr_lpfc_peer_port_login,
&dev_attr_lpfc_restrict_login,
@@ -3003,6 +3081,7 @@
&dev_attr_lpfc_enable_da_id,
&dev_attr_lpfc_max_scsicmpl_time,
&dev_attr_lpfc_stat_data_ctrl,
+ &dev_attr_lpfc_static_vport,
NULL,
};
@@ -3199,7 +3278,7 @@
}
}
- memcpy((uint8_t *) & phba->sysfs_mbox.mbox->mb + off,
+ memcpy((uint8_t *) &phba->sysfs_mbox.mbox->u.mb + off,
buf, count);
phba->sysfs_mbox.offset = off + count;
@@ -3241,6 +3320,7 @@
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int rc;
+ MAILBOX_t *pmb;
if (off > MAILBOX_CMD_SIZE)
return -ERANGE;
@@ -3265,8 +3345,8 @@
if (off == 0 &&
phba->sysfs_mbox.state == SMBOX_WRITING &&
phba->sysfs_mbox.offset >= 2 * sizeof(uint32_t)) {
-
- switch (phba->sysfs_mbox.mbox->mb.mbxCommand) {
+ pmb = &phba->sysfs_mbox.mbox->u.mb;
+ switch (pmb->mbxCommand) {
/* Offline only */
case MBX_INIT_LINK:
case MBX_DOWN_LINK:
@@ -3283,7 +3363,7 @@
if (!(vport->fc_flag & FC_OFFLINE_MODE)) {
printk(KERN_WARNING "mbox_read:Command 0x%x "
"is illegal in on-line state\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
sysfs_mbox_idle(phba);
spin_unlock_irq(&phba->hbalock);
return -EPERM;
@@ -3319,13 +3399,13 @@
case MBX_CONFIG_PORT:
case MBX_RUN_BIU_DIAG:
printk(KERN_WARNING "mbox_read: Illegal Command 0x%x\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
sysfs_mbox_idle(phba);
spin_unlock_irq(&phba->hbalock);
return -EPERM;
default:
printk(KERN_WARNING "mbox_read: Unknown Command 0x%x\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
sysfs_mbox_idle(phba);
spin_unlock_irq(&phba->hbalock);
return -EPERM;
@@ -3335,14 +3415,14 @@
* or RESTART mailbox commands until the HBA is restarted.
*/
if (phba->pport->stopped &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_DUMP_MEMORY &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_RESTART &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_VPARMS &&
- phba->sysfs_mbox.mbox->mb.mbxCommand != MBX_WRITE_WWN)
+ pmb->mbxCommand != MBX_DUMP_MEMORY &&
+ pmb->mbxCommand != MBX_RESTART &&
+ pmb->mbxCommand != MBX_WRITE_VPARMS &&
+ pmb->mbxCommand != MBX_WRITE_WWN)
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
"1259 mbox: Issued mailbox cmd "
"0x%x while in stopped state.\n",
- phba->sysfs_mbox.mbox->mb.mbxCommand);
+ pmb->mbxCommand);
phba->sysfs_mbox.mbox->vport = vport;
@@ -3356,7 +3436,7 @@
}
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(phba->sli.sli_flag & LPFC_SLI2_ACTIVE))){
+ (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) {
spin_unlock_irq(&phba->hbalock);
rc = lpfc_sli_issue_mbox (phba,
@@ -3368,8 +3448,7 @@
spin_unlock_irq(&phba->hbalock);
rc = lpfc_sli_issue_mbox_wait (phba,
phba->sysfs_mbox.mbox,
- lpfc_mbox_tmo_val(phba,
- phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
+ lpfc_mbox_tmo_val(phba, pmb->mbxCommand) * HZ);
spin_lock_irq(&phba->hbalock);
}
@@ -3391,7 +3470,7 @@
return -EAGAIN;
}
- memcpy(buf, (uint8_t *) & phba->sysfs_mbox.mbox->mb + off, count);
+ memcpy(buf, (uint8_t *) &pmb + off, count);
phba->sysfs_mbox.offset = off + count;
@@ -3585,6 +3664,9 @@
case LA_8GHZ_LINK:
fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
break;
+ case LA_10GHZ_LINK:
+ fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+ break;
default:
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
@@ -3652,7 +3734,7 @@
*/
if (phba->link_state < LPFC_LINK_DOWN ||
!phba->mbox_mem_pool ||
- (phba->sli.sli_flag & LPFC_SLI2_ACTIVE) == 0)
+ (phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
return NULL;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
@@ -3663,14 +3745,14 @@
return NULL;
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
- pmb = &pmboxq->mb;
+ pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_STATUS;
pmb->mbxOwner = OWN_HOST;
pmboxq->context1 = NULL;
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3695,7 +3777,7 @@
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3769,7 +3851,7 @@
return;
memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
- pmb = &pmboxq->mb;
+ pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_STATUS;
pmb->mbxOwner = OWN_HOST;
pmb->un.varWords[0] = 0x1; /* reset request */
@@ -3777,7 +3859,7 @@
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3795,7 +3877,7 @@
pmboxq->vport = vport;
if ((vport->fc_flag & FC_OFFLINE_MODE) ||
- (!(psli->sli_flag & LPFC_SLI2_ACTIVE)))
+ (!(psli->sli_flag & LPFC_SLI_ACTIVE)))
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
@@ -3962,6 +4044,21 @@
lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
}
+/**
+ * lpfc_hba_log_verbose_init - Set hba's log verbose level
+ * @phba: Pointer to lpfc_hba struct.
+ *
+ * This function is called by the lpfc_get_cfgparam() routine to set the
+ * module lpfc_log_verbose into the @phba cfg_log_verbose for use with
+ * log messsage according to the module's lpfc_log_verbose parameter setting
+ * before hba port or vport created.
+ **/
+static void
+lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)
+{
+ phba->cfg_log_verbose = verbose;
+}
+
struct fc_function_template lpfc_transport_functions = {
/* fixed attributes the driver supports */
.show_host_node_name = 1,
@@ -4105,6 +4202,9 @@
lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
lpfc_use_msi_init(phba, lpfc_use_msi);
+ lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
+ lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
+ lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count);
lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
lpfc_enable_bg_init(phba, lpfc_enable_bg);
@@ -4113,26 +4213,10 @@
phba->cfg_soft_wwpn = 0L;
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
lpfc_prot_sg_seg_cnt_init(phba, lpfc_prot_sg_seg_cnt);
- /*
- * Since the sg_tablesize is module parameter, the sg_dma_buf_size
- * used to create the sg_dma_buf_pool must be dynamically calculated.
- * 2 segments are added since the IOCB needs a command and response bde.
- */
- phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
-
- if (phba->cfg_enable_bg) {
- phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
- phba->cfg_sg_dma_buf_size +=
- phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
- }
-
- /* Also reinitialize the host templates with new values. */
- lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
- lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
-
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
+ lpfc_enable_fip_init(phba, lpfc_enable_fip);
+ lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
+
return;
}
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index f88ce3f..d2a9229 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -23,6 +23,8 @@
struct fc_rport;
void lpfc_dump_mem(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
void lpfc_dump_wakeup_param(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_dump_static_vport(struct lpfc_hba *, LPFC_MBOXQ_t *, uint16_t);
+int lpfc_dump_fcoe_param(struct lpfc_hba *, struct lpfcMboxq *);
void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
@@ -35,17 +37,19 @@
int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_reg_login(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
- LPFC_MBOXQ_t *, uint32_t);
+int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
+ LPFC_MBOXQ_t *, uint32_t);
void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
-void lpfc_reg_vpi(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
+void lpfc_reg_vpi(struct lpfc_vport *, LPFC_MBOXQ_t *);
void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
+void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
void lpfc_cleanup_rpis(struct lpfc_vport *, int);
int lpfc_linkdown(struct lpfc_hba *);
+void lpfc_linkdown_port(struct lpfc_vport *);
void lpfc_port_link_failure(struct lpfc_vport *);
void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -54,6 +58,7 @@
void lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_enqueue_node(struct lpfc_vport *, struct lpfc_nodelist *);
void lpfc_dequeue_node(struct lpfc_vport *, struct lpfc_nodelist *);
struct lpfc_nodelist *lpfc_enable_node(struct lpfc_vport *,
@@ -105,6 +110,7 @@
int lpfc_issue_els_logo(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
int lpfc_issue_els_npiv_logo(struct lpfc_vport *, struct lpfc_nodelist *);
int lpfc_issue_els_scr(struct lpfc_vport *, uint32_t, uint8_t);
+int lpfc_issue_fabric_reglogin(struct lpfc_vport *);
int lpfc_els_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
int lpfc_ct_free_iocb(struct lpfc_hba *, struct lpfc_iocbq *);
int lpfc_els_rsp_acc(struct lpfc_vport *, uint32_t, struct lpfc_iocbq *,
@@ -149,15 +155,19 @@
void lpfc_unblock_mgmt_io(struct lpfc_hba *);
void lpfc_offline_prep(struct lpfc_hba *);
void lpfc_offline(struct lpfc_hba *);
+void lpfc_reset_hba(struct lpfc_hba *);
int lpfc_sli_setup(struct lpfc_hba *);
int lpfc_sli_queue_setup(struct lpfc_hba *);
void lpfc_handle_eratt(struct lpfc_hba *);
void lpfc_handle_latt(struct lpfc_hba *);
-irqreturn_t lpfc_intr_handler(int, void *);
-irqreturn_t lpfc_sp_intr_handler(int, void *);
-irqreturn_t lpfc_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_intr_handler(int, void *);
+irqreturn_t lpfc_sli_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli_fp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_sp_intr_handler(int, void *);
+irqreturn_t lpfc_sli4_fp_intr_handler(int, void *);
void lpfc_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_config_ring(struct lpfc_hba *, int, LPFC_MBOXQ_t *);
@@ -165,16 +175,32 @@
void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+void __lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_mbox_cmpl_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_cmd_check(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_mbox_dev_check(struct lpfc_hba *);
int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
+void lpfc_init_vfi(struct lpfcMboxq *, struct lpfc_vport *);
+void lpfc_reg_vfi(struct lpfcMboxq *, struct lpfc_vport *, dma_addr_t);
+void lpfc_init_vpi(struct lpfcMboxq *, uint16_t);
+void lpfc_unreg_vfi(struct lpfcMboxq *, uint16_t);
+void lpfc_reg_fcfi(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_unreg_fcfi(struct lpfcMboxq *, uint16_t);
+void lpfc_resume_rpi(struct lpfcMboxq *, struct lpfc_nodelist *);
void lpfc_config_hbq(struct lpfc_hba *, uint32_t, struct lpfc_hbq_init *,
uint32_t , LPFC_MBOXQ_t *);
struct hbq_dmabuf *lpfc_els_hbq_alloc(struct lpfc_hba *);
void lpfc_els_hbq_free(struct lpfc_hba *, struct hbq_dmabuf *);
+struct hbq_dmabuf *lpfc_sli4_rb_alloc(struct lpfc_hba *);
+void lpfc_sli4_rb_free(struct lpfc_hba *, struct hbq_dmabuf *);
+void lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *, struct fcf_record *,
+ uint16_t);
+void lpfc_unregister_unused_fcf(struct lpfc_hba *);
-int lpfc_mem_alloc(struct lpfc_hba *);
+int lpfc_mem_alloc(struct lpfc_hba *, int align);
void lpfc_mem_free(struct lpfc_hba *);
+void lpfc_mem_free_all(struct lpfc_hba *);
void lpfc_stop_vport_timers(struct lpfc_vport *);
void lpfc_poll_timeout(unsigned long ptr);
@@ -186,6 +212,7 @@
uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
uint32_t);
+void lpfc_sli_wake_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *);
void lpfc_reset_barrier(struct lpfc_hba * phba);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
@@ -198,12 +225,13 @@
int lpfc_sli_hba_down(struct lpfc_hba *);
int lpfc_sli_issue_mbox(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
int lpfc_sli_handle_mb_event(struct lpfc_hba *);
-int lpfc_sli_flush_mbox_queue(struct lpfc_hba *);
+void lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *);
int lpfc_sli_check_eratt(struct lpfc_hba *);
-int lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
+void lpfc_sli_handle_slow_ring_event(struct lpfc_hba *,
struct lpfc_sli_ring *, uint32_t);
+int lpfc_sli4_handle_received_buffer(struct lpfc_hba *);
void lpfc_sli_def_mbox_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_sli_issue_iocb(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, uint32_t);
void lpfc_sli_pcimem_bcopy(void *, void *, uint32_t);
void lpfc_sli_abort_iocb_ring(struct lpfc_hba *, struct lpfc_sli_ring *);
@@ -237,7 +265,7 @@
int lpfc_sli_issue_mbox_wait(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
-int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, struct lpfc_sli_ring *,
+int lpfc_sli_issue_iocb_wait(struct lpfc_hba *, uint32_t,
struct lpfc_iocbq *, struct lpfc_iocbq *,
uint32_t);
void lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *, struct lpfc_iocbq *,
@@ -254,6 +282,12 @@
const char* lpfc_info(struct Scsi_Host *);
int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
+int lpfc_init_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_sli_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_scsi_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_mbox_api_table_setup(struct lpfc_hba *, uint8_t);
+int lpfc_api_table_setup(struct lpfc_hba *, uint8_t);
+
void lpfc_get_cfgparam(struct lpfc_hba *);
void lpfc_get_vport_cfgparam(struct lpfc_vport *);
int lpfc_alloc_sysfs_attr(struct lpfc_vport *);
@@ -314,8 +348,15 @@
struct lpfc_iocbq *);
struct lpfc_fast_path_event *lpfc_alloc_fast_evt(struct lpfc_hba *);
void lpfc_free_fast_evt(struct lpfc_hba *, struct lpfc_fast_path_event *);
+void lpfc_create_static_vport(struct lpfc_hba *);
+void lpfc_stop_hba_timers(struct lpfc_hba *);
+void lpfc_stop_port(struct lpfc_hba *);
+void lpfc_parse_fcoe_conf(struct lpfc_hba *, uint8_t *, uint32_t);
+int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
+void lpfc_start_fdiscs(struct lpfc_hba *phba);
#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
#define HBA_EVENT_RSCN 5
#define HBA_EVENT_LINK_UP 2
#define HBA_EVENT_LINK_DOWN 3
+
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 896c7b0..1dbccfd 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -32,8 +32,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -267,8 +269,6 @@
uint32_t tmo, uint8_t retry)
{
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
IOCB_t *icmd;
struct lpfc_iocbq *geniocb;
int rc;
@@ -331,7 +331,7 @@
geniocb->drvrTimeout = icmd->ulpTimeout + LPFC_DRVR_TIMEOUT;
geniocb->vport = vport;
geniocb->retry = retry;
- rc = lpfc_sli_issue_iocb(phba, pring, geniocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, geniocb, 0);
if (rc == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, geniocb);
@@ -1578,6 +1578,9 @@
case LA_8GHZ_LINK:
ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
break;
+ case LA_10GHZ_LINK:
+ ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
+ break;
default:
ae->un.PortSpeed =
HBA_PORTSPEED_UNKNOWN;
@@ -1730,7 +1733,7 @@
uint8_t *fwname;
if (vp->rev.rBit) {
- if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+ if (psli->sli_flag & LPFC_SLI_ACTIVE)
rev = vp->rev.sli2FwRev;
else
rev = vp->rev.sli1FwRev;
@@ -1756,7 +1759,7 @@
}
b4 = (rev & 0x0000000f);
- if (psli->sli_flag & LPFC_SLI2_ACTIVE)
+ if (psli->sli_flag & LPFC_SLI_ACTIVE)
fwname = vp->rev.sli2FwName;
else
fwname = vp->rev.sli1FwName;
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 52be564..2b02b1f 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2007-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2007-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -33,8 +33,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -280,6 +282,8 @@
struct lpfc_dmabuf *d_buf;
struct hbq_dmabuf *hbq_buf;
+ if (phba->sli_rev != 3)
+ return 0;
cnt = LPFC_HBQINFO_SIZE;
spin_lock_irq(&phba->hbalock);
@@ -489,12 +493,15 @@
pring->next_cmdidx, pring->local_getidx,
pring->flag, pgpp->rspPutInx, pring->numRiocb);
}
- word0 = readl(phba->HAregaddr);
- word1 = readl(phba->CAregaddr);
- word2 = readl(phba->HSregaddr);
- word3 = readl(phba->HCregaddr);
- len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x HC:%08x\n",
- word0, word1, word2, word3);
+
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ word0 = readl(phba->HAregaddr);
+ word1 = readl(phba->CAregaddr);
+ word2 = readl(phba->HSregaddr);
+ word3 = readl(phba->HCregaddr);
+ len += snprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
+ "HC:%08x\n", word0, word1, word2, word3);
+ }
spin_unlock_irq(&phba->hbalock);
return len;
}
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index ffd1089..1142070 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -135,6 +135,7 @@
#define NLP_NODEV_REMOVE 0x08000000 /* Defer removal till discovery ends */
#define NLP_TARGET_REMOVE 0x10000000 /* Target remove in process */
#define NLP_SC_REQ 0x20000000 /* Target requires authentication */
+#define NLP_RPI_VALID 0x80000000 /* nlp_rpi is valid */
/* ndlp usage management macros */
#define NLP_CHK_NODE_ACT(ndlp) (((ndlp)->nlp_usg_map \
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index b8b34cf..6bdeb14 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -84,7 +86,8 @@
uint32_t ha_copy;
if (vport->port_state >= LPFC_VPORT_READY ||
- phba->link_state == LPFC_LINK_DOWN)
+ phba->link_state == LPFC_LINK_DOWN ||
+ phba->sli_rev > LPFC_SLI_REV3)
return 0;
/* Read the HBA Host Attention Register */
@@ -219,7 +222,7 @@
icmd->un.elsreq64.myID = vport->fc_myDID;
/* For ELS_REQUEST64_CR, use the VPI by default */
- icmd->ulpContext = vport->vpi;
+ icmd->ulpContext = vport->vpi + phba->vpi_base;
icmd->ulpCt_h = 0;
/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
if (elscmd == ELS_CMD_ECHO)
@@ -305,7 +308,7 @@
* 0 - successfully issued fabric registration login for @vport
* -ENXIO -- failed to issue fabric registration login for @vport
**/
-static int
+int
lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
{
struct lpfc_hba *phba = vport->phba;
@@ -345,8 +348,7 @@
err = 4;
goto fail;
}
- rc = lpfc_reg_login(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
- 0);
+ rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
if (rc) {
err = 5;
goto fail_free_mbox;
@@ -386,6 +388,75 @@
}
/**
+ * lpfc_issue_reg_vfi - Register VFI for this vport's fabric login
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This routine issues a REG_VFI mailbox for the vfi, vpi, fcfi triplet for
+ * the @vport. This mailbox command is necessary for FCoE only.
+ *
+ * Return code
+ * 0 - successfully issued REG_VFI for @vport
+ * A failure code otherwise.
+ **/
+static int
+lpfc_issue_reg_vfi(struct lpfc_vport *vport)
+{
+ struct lpfc_hba *phba = vport->phba;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_nodelist *ndlp;
+ struct serv_parm *sp;
+ struct lpfc_dmabuf *dmabuf;
+ int rc = 0;
+
+ sp = &phba->fc_fabparam;
+ ndlp = lpfc_findnode_did(vport, Fabric_DID);
+ if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
+ rc = -ENODEV;
+ goto fail;
+ }
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf) {
+ rc = -ENOMEM;
+ goto fail;
+ }
+ dmabuf->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &dmabuf->phys);
+ if (!dmabuf->virt) {
+ rc = -ENOMEM;
+ goto fail_free_dmabuf;
+ }
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ rc = -ENOMEM;
+ goto fail_free_coherent;
+ }
+ vport->port_state = LPFC_FABRIC_CFG_LINK;
+ memcpy(dmabuf->virt, &phba->fc_fabparam, sizeof(vport->fc_sparam));
+ lpfc_reg_vfi(mboxq, vport, dmabuf->phys);
+ mboxq->mbox_cmpl = lpfc_mbx_cmpl_reg_vfi;
+ mboxq->vport = vport;
+ mboxq->context1 = dmabuf;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ rc = -ENXIO;
+ goto fail_free_mbox;
+ }
+ return 0;
+
+fail_free_mbox:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+fail_free_coherent:
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+fail_free_dmabuf:
+ kfree(dmabuf);
+fail:
+ lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0289 Issue Register VFI failed: Err %d\n", rc);
+ return rc;
+}
+
+/**
* lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
@@ -497,17 +568,24 @@
}
}
- lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
-
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
- vport->fc_flag & FC_VPORT_NEEDS_REG_VPI) {
- lpfc_register_new_vport(phba, vport, ndlp);
- return 0;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_REG_LOGIN_ISSUE);
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED &&
+ vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)
+ lpfc_register_new_vport(phba, vport, ndlp);
+ else
+ lpfc_issue_fabric_reglogin(vport);
+ } else {
+ ndlp->nlp_type |= NLP_FABRIC;
+ lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
+ if (vport->vfi_state & LPFC_VFI_REGISTERED) {
+ lpfc_start_fdiscs(phba);
+ lpfc_do_scr_ns_plogi(phba, vport);
+ } else
+ lpfc_issue_reg_vfi(vport);
}
- lpfc_issue_fabric_reglogin(vport);
return 0;
}
-
/**
* lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
* @vport: pointer to a host virtual N_Port data structure.
@@ -815,9 +893,14 @@
if (sp->cmn.fcphHigh < FC_PH3)
sp->cmn.fcphHigh = FC_PH3;
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
+ elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
+ /* FLOGI needs to be 3 for WQE FCFI */
+ /* Set the fcfi to the fcfi we registered with */
+ elsiocb->iocb.ulpContext = phba->fcf.fcfi;
+ } else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
sp->cmn.request_multiple_Nport = 1;
-
/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
icmd->ulpCt_h = 1;
icmd->ulpCt_l = 0;
@@ -930,6 +1013,8 @@
if (!ndlp)
return 0;
lpfc_nlp_init(vport, ndlp, Fabric_DID);
+ /* Set the node type */
+ ndlp->nlp_type |= NLP_FABRIC;
/* Put ndlp onto node list */
lpfc_enqueue_node(vport, ndlp);
} else if (!NLP_CHK_NODE_ACT(ndlp)) {
@@ -1350,14 +1435,12 @@
IOCB_t *icmd;
struct lpfc_nodelist *ndlp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int ret;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
ndlp = lpfc_findnode_did(vport, did);
if (ndlp && !NLP_CHK_NODE_ACT(ndlp))
@@ -1391,7 +1474,7 @@
phba->fc_stat.elsXmitPLOGI++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_plogi;
- ret = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (ret == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
@@ -1501,14 +1584,9 @@
PRLI *npr;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = (sizeof(uint32_t) + sizeof(PRLI));
elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, retry, ndlp,
ndlp->nlp_DID, ELS_CMD_PRLI);
@@ -1550,7 +1628,8 @@
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_PRLI_SND;
spin_unlock_irq(shost->host_lock);
@@ -1608,7 +1687,8 @@
* and continue discovery.
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
- !(vport->fc_flag & FC_RSCN_MODE)) {
+ !(vport->fc_flag & FC_RSCN_MODE) &&
+ (phba->sli_rev < LPFC_SLI_REV4)) {
lpfc_issue_reg_vpi(phba, vport);
return;
}
@@ -1788,8 +1868,6 @@
ADISC *ap;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
uint16_t cmdsize;
@@ -1822,7 +1900,8 @@
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_ADISC_SND;
spin_unlock_irq(shost->host_lock);
@@ -1937,15 +2016,10 @@
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
- struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
- psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
spin_lock_irq(shost->host_lock);
if (ndlp->nlp_flag & NLP_LOGO_SND) {
spin_unlock_irq(shost->host_lock);
@@ -1978,7 +2052,7 @@
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
@@ -2058,14 +2132,12 @@
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(SCR));
ndlp = lpfc_findnode_did(vport, nportid);
@@ -2108,7 +2180,8 @@
phba->fc_stat.elsXmitSCR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the rlease of
* the node.
@@ -2152,7 +2225,6 @@
struct lpfc_hba *phba = vport->phba;
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
FARP *fp;
uint8_t *pcmd;
@@ -2162,7 +2234,6 @@
struct lpfc_nodelist *ndlp;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = (sizeof(uint32_t) + sizeof(FARP));
ndlp = lpfc_findnode_did(vport, nportid);
@@ -2219,7 +2290,8 @@
phba->fc_stat.elsXmitFARPR++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_cmd;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
/* The additional lpfc_nlp_put will cause the following
* lpfc_els_free_iocb routine to trigger the release of
* the node.
@@ -2949,6 +3021,14 @@
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
+ /*
+ * This routine is used to register and unregister in previous SLI
+ * modes.
+ */
+ if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+ (phba->sli_rev == LPFC_SLI_REV4))
+ lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
pmb->context1 = NULL;
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
@@ -2961,6 +3041,7 @@
*/
lpfc_nlp_not_used(ndlp);
}
+
return;
}
@@ -3170,7 +3251,6 @@
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
@@ -3178,7 +3258,6 @@
ELS_PKT *els_pkt_ptr;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
oldcmd = &oldiocb->iocb;
switch (flag) {
@@ -3266,7 +3345,7 @@
}
phba->fc_stat.elsXmitACC++;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3305,15 +3384,12 @@
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
-
cmdsize = 2 * sizeof(uint32_t);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
ndlp->nlp_DID, ELS_CMD_LS_RJT);
@@ -3346,7 +3422,7 @@
phba->fc_stat.elsXmitLSRJT++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
@@ -3379,8 +3455,6 @@
struct lpfc_nodelist *ndlp)
{
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
ADISC *ap;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
@@ -3422,7 +3496,7 @@
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3459,14 +3533,12 @@
IOCB_t *icmd;
IOCB_t *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING]; /* ELS ring */
cmdsize = sizeof(uint32_t) + sizeof(PRLI);
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -3520,7 +3592,7 @@
phba->fc_stat.elsXmitACC++;
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3562,15 +3634,12 @@
RNID *rn;
IOCB_t *icmd, *oldcmd;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
uint8_t *pcmd;
uint16_t cmdsize;
int rc;
psli = &phba->sli;
- pring = &psli->ring[LPFC_ELS_RING];
-
cmdsize = sizeof(uint32_t) + sizeof(uint32_t)
+ (2 * sizeof(struct lpfc_name));
if (format)
@@ -3626,7 +3695,7 @@
elsiocb->context1 = NULL; /* Don't need ndlp for cmpl,
* it could be freed */
- rc = lpfc_sli_issue_iocb(phba, pring, elsiocb, 0);
+ rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
if (rc == IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
@@ -3839,7 +3908,9 @@
payload_len -= sizeof(uint32_t);
switch (rscn_did.un.b.resv & RSCN_ADDRESS_FORMAT_MASK) {
case RSCN_ADDRESS_FORMAT_PORT:
- if (ns_did.un.word == rscn_did.un.word)
+ if ((ns_did.un.b.domain == rscn_did.un.b.domain)
+ && (ns_did.un.b.area == rscn_did.un.b.area)
+ && (ns_did.un.b.id == rscn_did.un.b.id))
goto return_did_out;
break;
case RSCN_ADDRESS_FORMAT_AREA:
@@ -4300,7 +4371,7 @@
lpfc_init_link(phba, mbox,
phba->cfg_topology,
phba->cfg_link_speed);
- mbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+ mbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->vport = vport;
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
@@ -4440,8 +4511,6 @@
static void
lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
MAILBOX_t *mb;
IOCB_t *icmd;
RPS_RSP *rps_rsp;
@@ -4451,7 +4520,7 @@
uint16_t xri, status;
uint32_t cmdsize;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
ndlp = (struct lpfc_nodelist *) pmb->context2;
xri = (uint16_t) ((unsigned long)(pmb->context1));
@@ -4507,7 +4576,7 @@
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR)
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) == IOCB_ERROR)
lpfc_els_free_iocb(phba, elsiocb);
return;
}
@@ -4616,8 +4685,6 @@
IOCB_t *icmd, *oldcmd;
RPL_RSP rpl_rsp;
struct lpfc_iocbq *elsiocb;
- struct lpfc_sli *psli = &phba->sli;
- struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
uint8_t *pcmd;
elsiocb = lpfc_prep_els_iocb(vport, 0, cmdsize, oldiocb->retry, ndlp,
@@ -4654,7 +4721,8 @@
ndlp->nlp_rpi);
elsiocb->iocb_cmpl = lpfc_cmpl_els_rsp;
phba->fc_stat.elsXmitACC++;
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_els_free_iocb(phba, elsiocb);
return 1;
}
@@ -4883,7 +4951,10 @@
} else {
/* FAN verified - skip FLOGI */
vport->fc_myDID = vport->fc_prevDID;
- lpfc_issue_fabric_reglogin(vport);
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ lpfc_issue_fabric_reglogin(vport);
+ else
+ lpfc_issue_reg_vfi(vport);
}
}
return 0;
@@ -5566,11 +5637,10 @@
dropit:
if (vport && !(vport->load_flag & FC_UNLOADING))
- lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
- "(%d):0111 Dropping received ELS cmd "
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0111 Dropping received ELS cmd "
"Data: x%x x%x x%x\n",
- vport->vpi, icmd->ulpStatus,
- icmd->un.ulpWord[4], icmd->ulpTimeout);
+ icmd->ulpStatus, icmd->un.ulpWord[4], icmd->ulpTimeout);
phba->fc_stat.elsRcvDrop++;
}
@@ -5646,10 +5716,9 @@
icmd->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
if (icmd->unsli3.rcvsli3.vpi == 0xffff)
vport = phba->pport;
- else {
- uint16_t vpi = icmd->unsli3.rcvsli3.vpi;
- vport = lpfc_find_vport_by_vpid(phba, vpi);
- }
+ else
+ vport = lpfc_find_vport_by_vpid(phba,
+ icmd->unsli3.rcvsli3.vpi - phba->vpi_base);
}
/* If there are no BDEs associated
* with this IOCB, there is nothing to do.
@@ -5781,7 +5850,7 @@
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
@@ -5818,7 +5887,10 @@
} else {
if (vport == phba->pport)
- lpfc_issue_fabric_reglogin(vport);
+ if (phba->sli_rev < LPFC_SLI_REV4)
+ lpfc_issue_fabric_reglogin(vport);
+ else
+ lpfc_issue_reg_vfi(vport);
else
lpfc_do_scr_ns_plogi(phba, vport);
}
@@ -5850,7 +5922,7 @@
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
- lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, mbox);
+ lpfc_reg_vpi(vport, mbox);
mbox->vport = vport;
mbox->context2 = lpfc_nlp_get(ndlp);
mbox->mbox_cmpl = lpfc_cmpl_reg_new_vport;
@@ -6139,7 +6211,6 @@
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *icmd;
struct lpfc_iocbq *elsiocb;
uint8_t *pcmd;
@@ -6169,7 +6240,8 @@
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
- if (lpfc_sli_issue_iocb(phba, pring, elsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0) ==
+ IOCB_ERROR) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
spin_unlock_irq(shost->host_lock);
@@ -6224,7 +6296,6 @@
struct lpfc_iocbq *iocb;
unsigned long iflags;
int ret;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
IOCB_t *cmd;
repeat:
@@ -6248,7 +6319,7 @@
"Fabric sched1: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6394,7 +6465,6 @@
lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
{
unsigned long iflags;
- struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
int ready;
int ret;
@@ -6418,7 +6488,7 @@
"Fabric sched2: ste:x%x",
iocb->vport->port_state, 0, 0);
- ret = lpfc_sli_issue_iocb(phba, pring, iocb, 0);
+ ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, iocb, 0);
if (ret == IOCB_ERROR) {
iocb->iocb_cmpl = iocb->fabric_iocb_cmpl;
@@ -6524,3 +6594,38 @@
lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
IOERR_SLI_ABORTED);
}
+
+/**
+ * lpfc_sli4_els_xri_aborted - Slow-path process of els xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the els xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 slow-path
+ * ELS aborted xri.
+ **/
+void
+lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
+ struct sli4_wcqe_xri_aborted *axri)
+{
+ uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+ unsigned long iflag = 0;
+
+ spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+ list_for_each_entry_safe(sglq_entry, sglq_next,
+ &phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
+ if (sglq_entry->sli4_xritag == xri) {
+ list_del(&sglq_entry->list);
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_sgl_list_lock,
+ iflag);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+
+ list_add_tail(&sglq_entry->list,
+ &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_sgl_list_lock, iflag);
+}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e764ce0..35c41ae 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -29,10 +29,12 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
@@ -273,6 +275,8 @@
!(ndlp->nlp_flag & NLP_NPR_2B_DISC) &&
(ndlp->nlp_state != NLP_STE_UNMAPPED_NODE))
lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
+
+ lpfc_unregister_unused_fcf(phba);
}
/**
@@ -295,10 +299,11 @@
ret = kzalloc(sizeof(struct lpfc_fast_path_event),
GFP_ATOMIC);
- if (ret)
+ if (ret) {
atomic_inc(&phba->fast_event_count);
- INIT_LIST_HEAD(&ret->work_evt.evt_listp);
- ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+ INIT_LIST_HEAD(&ret->work_evt.evt_listp);
+ ret->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
+ }
return ret;
}
@@ -491,6 +496,10 @@
phba->work_ha = 0;
spin_unlock_irq(&phba->hbalock);
+ /* First, try to post the next mailbox command to SLI4 device */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC)
+ lpfc_sli4_post_async_mbox(phba);
+
if (ha_copy & HA_ERATT)
/* Handle the error attention event */
lpfc_handle_eratt(phba);
@@ -501,9 +510,27 @@
if (ha_copy & HA_LATT)
lpfc_handle_latt(phba);
+ /* Process SLI4 events */
+ if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+ if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
+ lpfc_sli4_fcp_xri_abort_event_proc(phba);
+ if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
+ lpfc_sli4_els_xri_abort_event_proc(phba);
+ if (phba->hba_flag & ASYNC_EVENT)
+ lpfc_sli4_async_event_proc(phba);
+ if (phba->hba_flag & HBA_POST_RECEIVE_BUFFER) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_POST_RECEIVE_BUFFER;
+ spin_unlock_irq(&phba->hbalock);
+ lpfc_sli_hbqbuf_add_hbqs(phba, LPFC_ELS_HBQ);
+ }
+ if (phba->hba_flag & HBA_RECEIVE_BUFFER)
+ lpfc_sli4_handle_received_buffer(phba);
+ }
+
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi; i++) {
+ for (i = 0; i <= phba->max_vports; i++) {
/*
* We could have no vports in array if unloading, so if
* this happens then just use the pport
@@ -555,23 +582,24 @@
/*
* Turn on Ring interrupts
*/
- spin_lock_irq(&phba->hbalock);
- control = readl(phba->HCregaddr);
- if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
- lpfc_debugfs_slow_ring_trc(phba,
- "WRK Enable ring: cntl:x%x hacopy:x%x",
- control, ha_copy, 0);
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ spin_lock_irq(&phba->hbalock);
+ control = readl(phba->HCregaddr);
+ if (!(control & (HC_R0INT_ENA << LPFC_ELS_RING))) {
+ lpfc_debugfs_slow_ring_trc(phba,
+ "WRK Enable ring: cntl:x%x hacopy:x%x",
+ control, ha_copy, 0);
- control |= (HC_R0INT_ENA << LPFC_ELS_RING);
- writel(control, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
+ control |= (HC_R0INT_ENA << LPFC_ELS_RING);
+ writel(control, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ } else {
+ lpfc_debugfs_slow_ring_trc(phba,
+ "WRK Ring ok: cntl:x%x hacopy:x%x",
+ control, ha_copy, 0);
+ }
+ spin_unlock_irq(&phba->hbalock);
}
- else {
- lpfc_debugfs_slow_ring_trc(phba,
- "WRK Ring ok: cntl:x%x hacopy:x%x",
- control, ha_copy, 0);
- }
- spin_unlock_irq(&phba->hbalock);
}
lpfc_work_list_done(phba);
}
@@ -689,7 +717,7 @@
lpfc_can_disctmo(vport);
}
-static void
+void
lpfc_linkdown_port(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
@@ -716,6 +744,7 @@
if (phba->link_state == LPFC_LINK_DOWN)
return 0;
spin_lock_irq(&phba->hbalock);
+ phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_DISCOVERED);
if (phba->link_state > LPFC_LINK_DOWN) {
phba->link_state = LPFC_LINK_DOWN;
phba->pport->fc_flag &= ~FC_LBIT;
@@ -723,7 +752,7 @@
spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
/* Issue a LINK DOWN event to all nodes */
lpfc_linkdown_port(vports[i]);
}
@@ -833,10 +862,11 @@
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
lpfc_linkup_port(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
+ (phba->sli_rev < LPFC_SLI_REV4))
lpfc_issue_clear_la(phba, phba->pport);
return 0;
@@ -854,7 +884,7 @@
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
struct lpfc_sli *psli = &phba->sli;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint32_t control;
/* Since we don't do discovery right now, turn these off here */
@@ -917,7 +947,7 @@
{
struct lpfc_vport *vport = pmb->vport;
- if (pmb->mb.mbxStatus)
+ if (pmb->u.mb.mbxStatus)
goto out;
mempool_free(pmb, phba->mbox_mem_pool);
@@ -945,7 +975,7 @@
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
"0306 CONFIG_LINK mbxStatus error x%x "
"HBA state x%x\n",
- pmb->mb.mbxStatus, vport->port_state);
+ pmb->u.mb.mbxStatus, vport->port_state);
mempool_free(pmb, phba->mbox_mem_pool);
lpfc_linkdown(phba);
@@ -959,9 +989,592 @@
}
static void
+lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport = mboxq->vport;
+ unsigned long flags;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+ "2017 REG_FCFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+ }
+
+ /* Start FCoE discovery by sending a FLOGI. */
+ phba->fcf.fcfi = bf_get(lpfc_reg_fcfi_fcfi, &mboxq->u.mqe.un.reg_fcfi);
+ /* Set the FCFI registered flag */
+ spin_lock_irqsave(&phba->hbalock, flags);
+ phba->fcf.fcf_flag |= FCF_REGISTERED;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (vport->port_state != LPFC_FLOGI) {
+ spin_lock_irqsave(&phba->hbalock, flags);
+ phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ lpfc_initial_flogi(vport);
+ }
+
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+}
+
+/**
+ * lpfc_fab_name_match - Check if the fcf fabric name match.
+ * @fab_name: pointer to fabric name.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's fabric name with provided
+ * fabric name. If the fabric name are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_fab_name_match(uint8_t *fab_name, struct fcf_record *new_fcf_record)
+{
+ if ((fab_name[0] ==
+ bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record)) &&
+ (fab_name[1] ==
+ bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record)) &&
+ (fab_name[2] ==
+ bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record)) &&
+ (fab_name[3] ==
+ bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record)) &&
+ (fab_name[4] ==
+ bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record)) &&
+ (fab_name[5] ==
+ bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record)) &&
+ (fab_name[6] ==
+ bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record)) &&
+ (fab_name[7] ==
+ bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record)))
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * lpfc_mac_addr_match - Check if the fcf mac address match.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine compare the fcf record's mac address with HBA's
+ * FCF mac address. If the mac addresses are identical this function
+ * returns 1 else return 0.
+ **/
+static uint32_t
+lpfc_mac_addr_match(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+ if ((phba->fcf.mac_addr[0] ==
+ bf_get(lpfc_fcf_record_mac_0, new_fcf_record)) &&
+ (phba->fcf.mac_addr[1] ==
+ bf_get(lpfc_fcf_record_mac_1, new_fcf_record)) &&
+ (phba->fcf.mac_addr[2] ==
+ bf_get(lpfc_fcf_record_mac_2, new_fcf_record)) &&
+ (phba->fcf.mac_addr[3] ==
+ bf_get(lpfc_fcf_record_mac_3, new_fcf_record)) &&
+ (phba->fcf.mac_addr[4] ==
+ bf_get(lpfc_fcf_record_mac_4, new_fcf_record)) &&
+ (phba->fcf.mac_addr[5] ==
+ bf_get(lpfc_fcf_record_mac_5, new_fcf_record)))
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ *
+ * This routine copies the FCF information from the FCF
+ * record to lpfc_hba data structure.
+ **/
+static void
+lpfc_copy_fcf_record(struct lpfc_hba *phba, struct fcf_record *new_fcf_record)
+{
+ phba->fcf.fabric_name[0] =
+ bf_get(lpfc_fcf_record_fab_name_0, new_fcf_record);
+ phba->fcf.fabric_name[1] =
+ bf_get(lpfc_fcf_record_fab_name_1, new_fcf_record);
+ phba->fcf.fabric_name[2] =
+ bf_get(lpfc_fcf_record_fab_name_2, new_fcf_record);
+ phba->fcf.fabric_name[3] =
+ bf_get(lpfc_fcf_record_fab_name_3, new_fcf_record);
+ phba->fcf.fabric_name[4] =
+ bf_get(lpfc_fcf_record_fab_name_4, new_fcf_record);
+ phba->fcf.fabric_name[5] =
+ bf_get(lpfc_fcf_record_fab_name_5, new_fcf_record);
+ phba->fcf.fabric_name[6] =
+ bf_get(lpfc_fcf_record_fab_name_6, new_fcf_record);
+ phba->fcf.fabric_name[7] =
+ bf_get(lpfc_fcf_record_fab_name_7, new_fcf_record);
+ phba->fcf.mac_addr[0] =
+ bf_get(lpfc_fcf_record_mac_0, new_fcf_record);
+ phba->fcf.mac_addr[1] =
+ bf_get(lpfc_fcf_record_mac_1, new_fcf_record);
+ phba->fcf.mac_addr[2] =
+ bf_get(lpfc_fcf_record_mac_2, new_fcf_record);
+ phba->fcf.mac_addr[3] =
+ bf_get(lpfc_fcf_record_mac_3, new_fcf_record);
+ phba->fcf.mac_addr[4] =
+ bf_get(lpfc_fcf_record_mac_4, new_fcf_record);
+ phba->fcf.mac_addr[5] =
+ bf_get(lpfc_fcf_record_mac_5, new_fcf_record);
+ phba->fcf.fcf_indx = bf_get(lpfc_fcf_record_fcf_index, new_fcf_record);
+ phba->fcf.priority = new_fcf_record->fip_priority;
+}
+
+/**
+ * lpfc_register_fcf - Register the FCF with hba.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issues a register fcfi mailbox command to register
+ * the fcf with HBA.
+ **/
+static void
+lpfc_register_fcf(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *fcf_mbxq;
+ int rc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&phba->hbalock, flags);
+
+ /* If the FCF is not availabe do nothing. */
+ if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ return;
+ }
+
+ /* The FCF is already registered, start discovery */
+ if (phba->fcf.fcf_flag & FCF_REGISTERED) {
+ phba->fcf.fcf_flag |= (FCF_DISCOVERED | FCF_IN_USE);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ if (phba->pport->port_state != LPFC_FLOGI)
+ lpfc_initial_flogi(phba->pport);
+ return;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+
+ fcf_mbxq = mempool_alloc(phba->mbox_mem_pool,
+ GFP_KERNEL);
+ if (!fcf_mbxq)
+ return;
+
+ lpfc_reg_fcfi(phba, fcf_mbxq);
+ fcf_mbxq->vport = phba->pport;
+ fcf_mbxq->mbox_cmpl = lpfc_mbx_cmpl_reg_fcfi;
+ rc = lpfc_sli_issue_mbox(phba, fcf_mbxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED)
+ mempool_free(fcf_mbxq, phba->mbox_mem_pool);
+
+ return;
+}
+
+/**
+ * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
+ * @phba: pointer to lpfc hba data structure.
+ * @new_fcf_record: pointer to fcf record.
+ * @boot_flag: Indicates if this record used by boot bios.
+ * @addr_mode: The address mode to be used by this FCF
+ *
+ * This routine compare the fcf record with connect list obtained from the
+ * config region to decide if this FCF can be used for SAN discovery. It returns
+ * 1 if this record can be used for SAN discovery else return zero. If this FCF
+ * record can be used for SAN discovery, the boot_flag will indicate if this FCF
+ * is used by boot bios and addr_mode will indicate the addressing mode to be
+ * used for this FCF when the function returns.
+ * If the FCF record need to be used with a particular vlan id, the vlan is
+ * set in the vlan_id on return of the function. If not VLAN tagging need to
+ * be used with the FCF vlan_id will be set to 0xFFFF;
+ **/
+static int
+lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
+ struct fcf_record *new_fcf_record,
+ uint32_t *boot_flag, uint32_t *addr_mode,
+ uint16_t *vlan_id)
+{
+ struct lpfc_fcf_conn_entry *conn_entry;
+
+ if (!phba->cfg_enable_fip) {
+ *boot_flag = 0;
+ *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record);
+ if (phba->valid_vlan)
+ *vlan_id = phba->vlan_id;
+ else
+ *vlan_id = 0xFFFF;
+ return 1;
+ }
+
+ /*
+ * If there are no FCF connection table entry, driver connect to all
+ * FCFs.
+ */
+ if (list_empty(&phba->fcf_conn_rec_list)) {
+ *boot_flag = 0;
+ *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record);
+ *vlan_id = 0xFFFF;
+ return 1;
+ }
+
+ list_for_each_entry(conn_entry, &phba->fcf_conn_rec_list, list) {
+ if (!(conn_entry->conn_rec.flags & FCFCNCT_VALID))
+ continue;
+
+ if ((conn_entry->conn_rec.flags & FCFCNCT_FBNM_VALID) &&
+ !lpfc_fab_name_match(conn_entry->conn_rec.fabric_name,
+ new_fcf_record))
+ continue;
+
+ if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID) {
+ /*
+ * If the vlan bit map does not have the bit set for the
+ * vlan id to be used, then it is not a match.
+ */
+ if (!(new_fcf_record->vlan_bitmap
+ [conn_entry->conn_rec.vlan_tag / 8] &
+ (1 << (conn_entry->conn_rec.vlan_tag % 8))))
+ continue;
+ }
+
+ /*
+ * Check if the connection record specifies a required
+ * addressing mode.
+ */
+ if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ !(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)) {
+
+ /*
+ * If SPMA required but FCF not support this continue.
+ */
+ if ((conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ !(bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record) & LPFC_FCF_SPMA))
+ continue;
+
+ /*
+ * If FPMA required but FCF not support this continue.
+ */
+ if (!(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ !(bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record) & LPFC_FCF_FPMA))
+ continue;
+ }
+
+ /*
+ * This fcf record matches filtering criteria.
+ */
+ if (conn_entry->conn_rec.flags & FCFCNCT_BOOT)
+ *boot_flag = 1;
+ else
+ *boot_flag = 0;
+
+ *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
+ new_fcf_record);
+ /*
+ * If the user specified a required address mode, assign that
+ * address mode
+ */
+ if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ (!(conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED)))
+ *addr_mode = (conn_entry->conn_rec.flags &
+ FCFCNCT_AM_SPMA) ?
+ LPFC_FCF_SPMA : LPFC_FCF_FPMA;
+ /*
+ * If the user specified a prefered address mode, use the
+ * addr mode only if FCF support the addr_mode.
+ */
+ else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+ (conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ (*addr_mode & LPFC_FCF_SPMA))
+ *addr_mode = LPFC_FCF_SPMA;
+ else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
+ (conn_entry->conn_rec.flags & FCFCNCT_AM_PREFERRED) &&
+ !(conn_entry->conn_rec.flags & FCFCNCT_AM_SPMA) &&
+ (*addr_mode & LPFC_FCF_FPMA))
+ *addr_mode = LPFC_FCF_FPMA;
+ /*
+ * If user did not specify any addressing mode, use FPMA if
+ * possible else use SPMA.
+ */
+ else if (*addr_mode & LPFC_FCF_FPMA)
+ *addr_mode = LPFC_FCF_FPMA;
+
+ if (conn_entry->conn_rec.flags & FCFCNCT_VLAN_VALID)
+ *vlan_id = conn_entry->conn_rec.vlan_tag;
+ else
+ *vlan_id = 0xFFFF;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/**
+ * lpfc_mbx_cmpl_read_fcf_record - Completion handler for read_fcf mbox.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox object.
+ *
+ * This function iterate through all the fcf records available in
+ * HBA and choose the optimal FCF record for discovery. After finding
+ * the FCF for discovery it register the FCF record and kick start
+ * discovery.
+ * If FCF_IN_USE flag is set in currently used FCF, the routine try to
+ * use a FCF record which match fabric name and mac address of the
+ * currently used FCF record.
+ * If the driver support only one FCF, it will try to use the FCF record
+ * used by BOOT_BIOS.
+ */
+void
+lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ uint8_t *bytep;
+ struct lpfc_mbx_sge sge;
+ struct lpfc_mbx_read_fcf_tbl *read_fcf;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+ struct fcf_record *new_fcf_record;
+ int rc;
+ uint32_t boot_flag, addr_mode;
+ uint32_t next_fcf_index;
+ unsigned long flags;
+ uint16_t vlan_id;
+
+ /* Get the first SGE entry from the non-embedded DMA memory. This
+ * routine only uses a single SGE.
+ */
+ lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+ phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+ if (unlikely(!mboxq->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2524 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ goto out;
+ }
+ virt_addr = mboxq->sge_array->addr[0];
+
+ shdr = (union lpfc_sli4_cfg_shdr *)virt_addr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ /*
+ * The FCF Record was read and there is no reason for the driver
+ * to maintain the FCF record data or memory. Instead, just need
+ * to book keeping the FCFIs can be used.
+ */
+ if (shdr_status || shdr_add_status) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2521 READ_FCF_RECORD mailbox failed "
+ "with status x%x add_status x%x, mbx\n",
+ shdr_status, shdr_add_status);
+ goto out;
+ }
+ /* Interpreting the returned information of FCF records */
+ read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+ lpfc_sli_pcimem_bcopy(read_fcf, read_fcf,
+ sizeof(struct lpfc_mbx_read_fcf_tbl));
+ next_fcf_index = bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx, read_fcf);
+
+ new_fcf_record = (struct fcf_record *)(virt_addr +
+ sizeof(struct lpfc_mbx_read_fcf_tbl));
+ lpfc_sli_pcimem_bcopy(new_fcf_record, new_fcf_record,
+ sizeof(struct fcf_record));
+ bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+
+ rc = lpfc_match_fcf_conn_list(phba, new_fcf_record,
+ &boot_flag, &addr_mode,
+ &vlan_id);
+ /*
+ * If the fcf record does not match with connect list entries
+ * read the next entry.
+ */
+ if (!rc)
+ goto read_next_fcf;
+ /*
+ * If this is not the first FCF discovery of the HBA, use last
+ * FCF record for the discovery.
+ */
+ spin_lock_irqsave(&phba->hbalock, flags);
+ if (phba->fcf.fcf_flag & FCF_IN_USE) {
+ if (lpfc_fab_name_match(phba->fcf.fabric_name,
+ new_fcf_record) &&
+ lpfc_mac_addr_match(phba, new_fcf_record)) {
+ phba->fcf.fcf_flag |= FCF_AVAILABLE;
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto out;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ if (phba->fcf.fcf_flag & FCF_AVAILABLE) {
+ /*
+ * If the current FCF record does not have boot flag
+ * set and new fcf record has boot flag set, use the
+ * new fcf record.
+ */
+ if (boot_flag && !(phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+ /* Use this FCF record */
+ lpfc_copy_fcf_record(phba, new_fcf_record);
+ phba->fcf.addr_mode = addr_mode;
+ phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+ if (vlan_id != 0xFFFF) {
+ phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+ phba->fcf.vlan_id = vlan_id;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ /*
+ * If the current FCF record has boot flag set and the
+ * new FCF record does not have boot flag, read the next
+ * FCF record.
+ */
+ if (!boot_flag && (phba->fcf.fcf_flag & FCF_BOOT_ENABLE)) {
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ /*
+ * If there is a record with lower priority value for
+ * the current FCF, use that record.
+ */
+ if (lpfc_fab_name_match(phba->fcf.fabric_name, new_fcf_record)
+ && (new_fcf_record->fip_priority <
+ phba->fcf.priority)) {
+ /* Use this FCF record */
+ lpfc_copy_fcf_record(phba, new_fcf_record);
+ phba->fcf.addr_mode = addr_mode;
+ if (vlan_id != 0xFFFF) {
+ phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+ phba->fcf.vlan_id = vlan_id;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+ }
+ /*
+ * This is the first available FCF record, use this
+ * record.
+ */
+ lpfc_copy_fcf_record(phba, new_fcf_record);
+ phba->fcf.addr_mode = addr_mode;
+ if (boot_flag)
+ phba->fcf.fcf_flag |= FCF_BOOT_ENABLE;
+ phba->fcf.fcf_flag |= FCF_AVAILABLE;
+ if (vlan_id != 0xFFFF) {
+ phba->fcf.fcf_flag |= FCF_VALID_VLAN;
+ phba->fcf.vlan_id = vlan_id;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ goto read_next_fcf;
+
+read_next_fcf:
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ if (next_fcf_index == LPFC_FCOE_FCF_NEXT_NONE || next_fcf_index == 0)
+ lpfc_register_fcf(phba);
+ else
+ lpfc_sli4_read_fcf_record(phba, next_fcf_index);
+ return;
+
+out:
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ lpfc_register_fcf(phba);
+
+ return;
+}
+
+/**
+ * lpfc_start_fdiscs - send fdiscs for each vports on this port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This function loops through the list of vports on the @phba and issues an
+ * FDISC if possible.
+ */
+void
+lpfc_start_fdiscs(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ int i;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
+ continue;
+ /* There are no vpi for this vport */
+ if (vports[i]->vpi > phba->max_vpi) {
+ lpfc_vport_set_state(vports[i],
+ FC_VPORT_FAILED);
+ continue;
+ }
+ if (phba->fc_topology == TOPOLOGY_LOOP) {
+ lpfc_vport_set_state(vports[i],
+ FC_VPORT_LINKDOWN);
+ continue;
+ }
+ if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
+ lpfc_initial_fdisc(vports[i]);
+ else {
+ lpfc_vport_set_state(vports[i],
+ FC_VPORT_NO_FABRIC_SUPP);
+ lpfc_printf_vlog(vports[i], KERN_ERR,
+ LOG_ELS,
+ "0259 No NPIV "
+ "Fabric support\n");
+ }
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+}
+
+void
+lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_dmabuf *dmabuf = mboxq->context1;
+ struct lpfc_vport *vport = mboxq->vport;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+ "2018 REG_VFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ if (phba->fc_topology == TOPOLOGY_LOOP) {
+ /* FLOGI failed, use loop map to make discovery list */
+ lpfc_disc_list_loopmap(vport);
+ /* Start discovery */
+ lpfc_disc_start(vport);
+ goto fail_free_mem;
+ }
+ lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+ goto fail_free_mem;
+ }
+ /* Mark the vport has registered with its VFI */
+ vport->vfi_state |= LPFC_VFI_REGISTERED;
+
+ if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
+ lpfc_start_fdiscs(phba);
+ lpfc_do_scr_ns_plogi(phba, vport);
+ }
+
+fail_free_mem:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ return;
+}
+
+static void
lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) pmb->context1;
struct lpfc_vport *vport = pmb->vport;
@@ -1012,13 +1625,13 @@
lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
{
struct lpfc_vport *vport = phba->pport;
- LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox;
+ LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
int i;
struct lpfc_dmabuf *mp;
int rc;
+ struct fcf_record *fcf_record;
sparam_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
- cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
spin_lock_irq(&phba->hbalock);
switch (la->UlnkSpeed) {
@@ -1034,6 +1647,9 @@
case LA_8GHZ_LINK:
phba->fc_linkspeed = LA_8GHZ_LINK;
break;
+ case LA_10GHZ_LINK:
+ phba->fc_linkspeed = LA_10GHZ_LINK;
+ break;
default:
phba->fc_linkspeed = LA_UNKNW_LINK;
break;
@@ -1115,22 +1731,66 @@
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(sparam_mbox, phba->mbox_mem_pool);
- if (cfglink_mbox)
- mempool_free(cfglink_mbox, phba->mbox_mem_pool);
goto out;
}
}
- if (cfglink_mbox) {
+ if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+ cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!cfglink_mbox)
+ goto out;
vport->port_state = LPFC_LOCAL_CFG_LINK;
lpfc_config_link(phba, cfglink_mbox);
cfglink_mbox->vport = vport;
cfglink_mbox->mbox_cmpl = lpfc_mbx_cmpl_local_config_link;
rc = lpfc_sli_issue_mbox(phba, cfglink_mbox, MBX_NOWAIT);
- if (rc != MBX_NOT_FINISHED)
- return;
- mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+ if (rc == MBX_NOT_FINISHED) {
+ mempool_free(cfglink_mbox, phba->mbox_mem_pool);
+ goto out;
+ }
+ } else {
+ /*
+ * Add the driver's default FCF record at FCF index 0 now. This
+ * is phase 1 implementation that support FCF index 0 and driver
+ * defaults.
+ */
+ if (phba->cfg_enable_fip == 0) {
+ fcf_record = kzalloc(sizeof(struct fcf_record),
+ GFP_KERNEL);
+ if (unlikely(!fcf_record)) {
+ lpfc_printf_log(phba, KERN_ERR,
+ LOG_MBOX | LOG_SLI,
+ "2554 Could not allocate memmory for "
+ "fcf record\n");
+ rc = -ENODEV;
+ goto out;
+ }
+
+ lpfc_sli4_build_dflt_fcf_record(phba, fcf_record,
+ LPFC_FCOE_FCF_DEF_INDEX);
+ rc = lpfc_sli4_add_fcf_record(phba, fcf_record);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR,
+ LOG_MBOX | LOG_SLI,
+ "2013 Could not manually add FCF "
+ "record 0, status %d\n", rc);
+ rc = -ENODEV;
+ kfree(fcf_record);
+ goto out;
+ }
+ kfree(fcf_record);
+ }
+ /*
+ * The driver is expected to do FIP/FCF. Call the port
+ * and get the FCF Table.
+ */
+ rc = lpfc_sli4_read_fcf_record(phba,
+ LPFC_FCOE_FCF_GET_FIRST);
+ if (rc)
+ goto out;
}
+
+ return;
out:
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
@@ -1147,10 +1807,12 @@
struct lpfc_sli *psli = &phba->sli;
spin_lock_irq(&phba->hbalock);
psli->sli_flag |= LPFC_PROCESS_LA;
- control = readl(phba->HCregaddr);
- control |= HC_LAINT_ENA;
- writel(control, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ control = readl(phba->HCregaddr);
+ control |= HC_LAINT_ENA;
+ writel(control, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ }
spin_unlock_irq(&phba->hbalock);
}
@@ -1159,6 +1821,7 @@
{
lpfc_linkdown(phba);
lpfc_enable_la(phba);
+ lpfc_unregister_unused_fcf(phba);
/* turn on Link Attention interrupts - no CLEAR_LA needed */
}
@@ -1175,7 +1838,7 @@
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
READ_LA_VAR *la;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
/* Unblock ELS traffic */
@@ -1190,7 +1853,7 @@
goto lpfc_mbx_cmpl_read_la_free_mbuf;
}
- la = (READ_LA_VAR *) & pmb->mb.un.varReadLA;
+ la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
memcpy(&phba->alpa_map[0], mp->virt, 128);
@@ -1328,7 +1991,7 @@
static void
lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
@@ -1381,7 +2044,7 @@
{
struct lpfc_vport *vport = pmb->vport;
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
switch (mb->mbxStatus) {
case 0x0011:
@@ -1416,6 +2079,128 @@
return;
}
+/**
+ * lpfc_create_static_vport - Read HBA config region to create static vports.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine issue a DUMP mailbox command for config region 22 to get
+ * the list of static vports to be created. The function create vports
+ * based on the information returned from the HBA.
+ **/
+void
+lpfc_create_static_vport(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *pmb = NULL;
+ MAILBOX_t *mb;
+ struct static_vport_info *vport_info;
+ int rc, i;
+ struct fc_vport_identifiers vport_id;
+ struct fc_vport *new_fc_vport;
+ struct Scsi_Host *shost;
+ struct lpfc_vport *vport;
+ uint16_t offset = 0;
+ uint8_t *vport_buff;
+
+ pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0542 lpfc_create_static_vport failed to"
+ " allocate mailbox memory\n");
+ return;
+ }
+
+ mb = &pmb->u.mb;
+
+ vport_info = kzalloc(sizeof(struct static_vport_info), GFP_KERNEL);
+ if (!vport_info) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0543 lpfc_create_static_vport failed to"
+ " allocate vport_info\n");
+ mempool_free(pmb, phba->mbox_mem_pool);
+ return;
+ }
+
+ vport_buff = (uint8_t *) vport_info;
+ do {
+ lpfc_dump_static_vport(phba, pmb, offset);
+ pmb->vport = phba->pport;
+ rc = lpfc_sli_issue_mbox_wait(phba, pmb, LPFC_MBOX_TMO);
+
+ if ((rc != MBX_SUCCESS) || mb->mbxStatus) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0544 lpfc_create_static_vport failed to"
+ " issue dump mailbox command ret 0x%x "
+ "status 0x%x\n",
+ rc, mb->mbxStatus);
+ goto out;
+ }
+
+ if (mb->un.varDmp.word_cnt >
+ sizeof(struct static_vport_info) - offset)
+ mb->un.varDmp.word_cnt =
+ sizeof(struct static_vport_info) - offset;
+
+ lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
+ vport_buff + offset,
+ mb->un.varDmp.word_cnt);
+ offset += mb->un.varDmp.word_cnt;
+
+ } while (mb->un.varDmp.word_cnt &&
+ offset < sizeof(struct static_vport_info));
+
+
+ if ((le32_to_cpu(vport_info->signature) != VPORT_INFO_SIG) ||
+ ((le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK)
+ != VPORT_INFO_REV)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0545 lpfc_create_static_vport bad"
+ " information header 0x%x 0x%x\n",
+ le32_to_cpu(vport_info->signature),
+ le32_to_cpu(vport_info->rev) & VPORT_INFO_REV_MASK);
+
+ goto out;
+ }
+
+ shost = lpfc_shost_from_vport(phba->pport);
+
+ for (i = 0; i < MAX_STATIC_VPORT_COUNT; i++) {
+ memset(&vport_id, 0, sizeof(vport_id));
+ vport_id.port_name = wwn_to_u64(vport_info->vport_list[i].wwpn);
+ vport_id.node_name = wwn_to_u64(vport_info->vport_list[i].wwnn);
+ if (!vport_id.port_name || !vport_id.node_name)
+ continue;
+
+ vport_id.roles = FC_PORT_ROLE_FCP_INITIATOR;
+ vport_id.vport_type = FC_PORTTYPE_NPIV;
+ vport_id.disable = false;
+ new_fc_vport = fc_vport_create(shost, 0, &vport_id);
+
+ if (!new_fc_vport) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0546 lpfc_create_static_vport failed to"
+ " create vport \n");
+ continue;
+ }
+
+ vport = *(struct lpfc_vport **)new_fc_vport->dd_data;
+ vport->vport_flag |= STATIC_VPORT;
+ }
+
+out:
+ /*
+ * If this is timed out command, setting NULL to context2 tell SLI
+ * layer not to use this buffer.
+ */
+ spin_lock_irq(&phba->hbalock);
+ pmb->context2 = NULL;
+ spin_unlock_irq(&phba->hbalock);
+ kfree(vport_info);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(pmb, phba->mbox_mem_pool);
+
+ return;
+}
+
/*
* This routine handles processing a Fabric REG_LOGIN mailbox
* command upon completion. It is setup in the LPFC_MBOXQ
@@ -1426,16 +2211,17 @@
lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_vport *vport = pmb->vport;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp;
- struct lpfc_vport **vports;
- int i;
ndlp = (struct lpfc_nodelist *) pmb->context2;
pmb->context1 = NULL;
pmb->context2 = NULL;
if (mb->mbxStatus) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
+ "0258 Register Fabric login error: 0x%x\n",
+ mb->mbxStatus);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
@@ -1454,9 +2240,6 @@
}
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
- lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX,
- "0258 Register Fabric login error: 0x%x\n",
- mb->mbxStatus);
/* Decrement the reference count to ndlp after the reference
* to the ndlp are done.
*/
@@ -1465,34 +2248,12 @@
}
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
- vports = lpfc_create_vport_work_array(phba);
- if (vports != NULL)
- for(i = 0;
- i <= phba->max_vpi && vports[i] != NULL;
- i++) {
- if (vports[i]->port_type == LPFC_PHYSICAL_PORT)
- continue;
- if (phba->fc_topology == TOPOLOGY_LOOP) {
- lpfc_vport_set_state(vports[i],
- FC_VPORT_LINKDOWN);
- continue;
- }
- if (phba->link_flag & LS_NPIV_FAB_SUPPORTED)
- lpfc_initial_fdisc(vports[i]);
- else {
- lpfc_vport_set_state(vports[i],
- FC_VPORT_NO_FABRIC_SUPP);
- lpfc_printf_vlog(vport, KERN_ERR,
- LOG_ELS,
- "0259 No NPIV "
- "Fabric support\n");
- }
- }
- lpfc_destroy_vport_work_array(phba, vports);
+ lpfc_start_fdiscs(phba);
lpfc_do_scr_ns_plogi(phba, vport);
}
@@ -1516,13 +2277,16 @@
void
lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
struct lpfc_vport *vport = pmb->vport;
if (mb->mbxStatus) {
out:
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+ "0260 Register NameServer error: 0x%x\n",
+ mb->mbxStatus);
/* decrement the node reference count held for this
* callback function.
*/
@@ -1546,15 +2310,13 @@
return;
}
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
- lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
- "0260 Register NameServer error: 0x%x\n",
- mb->mbxStatus);
return;
}
pmb->context1 = NULL;
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
@@ -2055,7 +2817,7 @@
if (pring->ringno == LPFC_ELS_RING) {
switch (icmd->ulpCommand) {
case CMD_GEN_REQUEST64_CR:
- if (icmd->ulpContext == (volatile ushort)ndlp->nlp_rpi)
+ if (iocb->context_un.ndlp == ndlp)
return 1;
case CMD_ELS_REQUEST64_CR:
if (icmd->un.elsreq64.remoteID == ndlp->nlp_DID)
@@ -2102,7 +2864,7 @@
*/
psli = &phba->sli;
rpi = ndlp->nlp_rpi;
- if (rpi) {
+ if (ndlp->nlp_flag & NLP_RPI_VALID) {
/* Now process each ring */
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->ring[i];
@@ -2150,7 +2912,7 @@
LPFC_MBOXQ_t *mbox;
int rc;
- if (ndlp->nlp_rpi) {
+ if (ndlp->nlp_flag & NLP_RPI_VALID) {
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (mbox) {
lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
@@ -2162,6 +2924,7 @@
}
lpfc_no_rpi(phba, ndlp);
ndlp->nlp_rpi = 0;
+ ndlp->nlp_flag &= ~NLP_RPI_VALID;
return 1;
}
return 0;
@@ -2252,7 +3015,7 @@
/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
if ((mb = phba->sli.mbox_active)) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mb->context2 = NULL;
mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
@@ -2261,7 +3024,7 @@
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mp = (struct lpfc_dmabuf *) (mb->context1);
if (mp) {
@@ -2309,13 +3072,14 @@
int rc;
lpfc_cancel_retry_delay_tmo(vport, ndlp);
- if (ndlp->nlp_flag & NLP_DEFER_RM && !ndlp->nlp_rpi) {
+ if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
+ !(ndlp->nlp_flag & NLP_RPI_VALID)) {
/* For this case we need to cleanup the default rpi
* allocated by the firmware.
*/
if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
!= NULL) {
- rc = lpfc_reg_login(phba, vport->vpi, ndlp->nlp_DID,
+ rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
(uint8_t *) &vport->fc_sparam, mbox, 0);
if (rc) {
mempool_free(mbox, phba->mbox_mem_pool);
@@ -2553,7 +3317,8 @@
* clear_la then don't send it.
*/
if ((phba->link_state >= LPFC_CLEAR_LA) ||
- (vport->port_type != LPFC_PHYSICAL_PORT))
+ (vport->port_type != LPFC_PHYSICAL_PORT) ||
+ (phba->sli_rev == LPFC_SLI_REV4))
return;
/* Link up discovery */
@@ -2582,7 +3347,7 @@
regvpimbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (regvpimbox) {
- lpfc_reg_vpi(phba, vport->vpi, vport->fc_myDID, regvpimbox);
+ lpfc_reg_vpi(vport, regvpimbox);
regvpimbox->mbox_cmpl = lpfc_mbx_cmpl_reg_vpi;
regvpimbox->vport = vport;
if (lpfc_sli_issue_mbox(phba, regvpimbox, MBX_NOWAIT)
@@ -2642,7 +3407,8 @@
*/
if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) &&
!(vport->fc_flag & FC_PT2PT) &&
- !(vport->fc_flag & FC_RSCN_MODE)) {
+ !(vport->fc_flag & FC_RSCN_MODE) &&
+ (phba->sli_rev < LPFC_SLI_REV4)) {
lpfc_issue_reg_vpi(phba, vport);
return;
}
@@ -2919,11 +3685,13 @@
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
- lpfc_issue_reg_vpi(phba, vport);
- else { /* NPIV Not enabled */
- lpfc_issue_clear_la(phba, vport);
- vport->port_state = LPFC_VPORT_READY;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ lpfc_issue_reg_vpi(phba, vport);
+ else { /* NPIV Not enabled */
+ lpfc_issue_clear_la(phba, vport);
+ vport->port_state = LPFC_VPORT_READY;
+ }
}
/* Setup and issue mailbox INITIALIZE LINK command */
@@ -2939,7 +3707,7 @@
lpfc_linkdown(phba);
lpfc_init_link(phba, initlinkmbox, phba->cfg_topology,
phba->cfg_link_speed);
- initlinkmbox->mb.un.varInitLnk.lipsr_AL_PA = 0;
+ initlinkmbox->u.mb.un.varInitLnk.lipsr_AL_PA = 0;
initlinkmbox->vport = vport;
initlinkmbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, initlinkmbox, MBX_NOWAIT);
@@ -2959,11 +3727,13 @@
* set port_state to PORT_READY if SLI2.
* cmpl_reg_vpi will set port_state to READY for SLI3.
*/
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
- lpfc_issue_reg_vpi(phba, vport);
- else { /* NPIV Not enabled */
- lpfc_issue_clear_la(phba, vport);
- vport->port_state = LPFC_VPORT_READY;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)
+ lpfc_issue_reg_vpi(phba, vport);
+ else { /* NPIV Not enabled */
+ lpfc_issue_clear_la(phba, vport);
+ vport->port_state = LPFC_VPORT_READY;
+ }
}
break;
@@ -3036,7 +3806,7 @@
void
lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
struct lpfc_vport *vport = pmb->vport;
@@ -3044,6 +3814,7 @@
pmb->context1 = NULL;
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
@@ -3297,3 +4068,395 @@
return 1;
return 0;
}
+
+/**
+ * lpfc_fcf_inuse - Check if FCF can be unregistered.
+ * @phba: Pointer to hba context object.
+ *
+ * This function iterate through all FC nodes associated
+ * will all vports to check if there is any node with
+ * fc_rports associated with it. If there is an fc_rport
+ * associated with the node, then the node is either in
+ * discovered state or its devloss_timer is pending.
+ */
+static int
+lpfc_fcf_inuse(struct lpfc_hba *phba)
+{
+ struct lpfc_vport **vports;
+ int i, ret = 0;
+ struct lpfc_nodelist *ndlp;
+ struct Scsi_Host *shost;
+
+ vports = lpfc_create_vport_work_array(phba);
+
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ shost = lpfc_shost_from_vport(vports[i]);
+ spin_lock_irq(shost->host_lock);
+ list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
+ if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport &&
+ (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) {
+ ret = 1;
+ spin_unlock_irq(shost->host_lock);
+ goto out;
+ }
+ }
+ spin_unlock_irq(shost->host_lock);
+ }
+out:
+ lpfc_destroy_vport_work_array(phba, vports);
+ return ret;
+}
+
+/**
+ * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport = mboxq->vport;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2555 UNREG_VFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ }
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+}
+
+/**
+ * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
+ * @phba: Pointer to hba context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This function frees memory associated with the mailbox command.
+ */
+static void
+lpfc_unregister_fcfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_vport *vport = mboxq->vport;
+
+ if (mboxq->u.mb.mbxStatus) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2550 UNREG_FCFI mbxStatus error x%x "
+ "HBA state x%x\n",
+ mboxq->u.mb.mbxStatus, vport->port_state);
+ }
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return;
+}
+
+/**
+ * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
+ * @phba: Pointer to hba context object.
+ *
+ * This function check if there are any connected remote port for the FCF and
+ * if all the devices are disconnected, this function unregister FCFI.
+ * This function also tries to use another FCF for discovery.
+ */
+void
+lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc;
+ struct lpfc_vport **vports;
+ int i;
+
+ spin_lock_irq(&phba->hbalock);
+ /*
+ * If HBA is not running in FIP mode or
+ * If HBA does not support FCoE or
+ * If FCF is not registered.
+ * do nothing.
+ */
+ if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
+ !(phba->fcf.fcf_flag & FCF_REGISTERED) ||
+ (phba->cfg_enable_fip == 0)) {
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ if (lpfc_fcf_inuse(phba))
+ return;
+
+
+ /* Unregister VPIs */
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports &&
+ (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED))
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ lpfc_mbx_unreg_vpi(vports[i]);
+ vports[i]->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
+ vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+
+ /* Unregister VFI */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2556 UNREG_VFI mbox allocation failed"
+ "HBA state x%x\n",
+ phba->pport->port_state);
+ return;
+ }
+
+ lpfc_unreg_vfi(mbox, phba->pport->vfi);
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_unregister_vfi_cmpl;
+
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2557 UNREG_VFI issue mbox failed rc x%x "
+ "HBA state x%x\n",
+ rc, phba->pport->port_state);
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+
+ /* Unregister FCF */
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2551 UNREG_FCFI mbox allocation failed"
+ "HBA state x%x\n",
+ phba->pport->port_state);
+ return;
+ }
+
+ lpfc_unreg_fcfi(mbox, phba->fcf.fcfi);
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_unregister_fcfi_cmpl;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT);
+
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2552 UNREG_FCFI issue mbox failed rc x%x "
+ "HBA state x%x\n",
+ rc, phba->pport->port_state);
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+
+ spin_lock_irq(&phba->hbalock);
+ phba->fcf.fcf_flag &= ~(FCF_AVAILABLE | FCF_REGISTERED |
+ FCF_DISCOVERED | FCF_BOOT_ENABLE | FCF_IN_USE |
+ FCF_VALID_VLAN);
+ spin_unlock_irq(&phba->hbalock);
+
+ /*
+ * If driver is not unloading, check if there is any other
+ * FCF record that can be used for discovery.
+ */
+ if ((phba->pport->load_flag & FC_UNLOADING) ||
+ (phba->link_state < LPFC_LINK_UP))
+ return;
+
+ rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
+
+ if (rc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY|LOG_MBOX,
+ "2553 lpfc_unregister_unused_fcf failed to read FCF"
+ " record HBA state x%x\n",
+ phba->pport->port_state);
+}
+
+/**
+ * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCF connection table as in the config
+ * region.
+ * This function create driver data structure for the FCF connection
+ * record table read from config region 23.
+ */
+static void
+lpfc_read_fcf_conn_tbl(struct lpfc_hba *phba,
+ uint8_t *buff)
+{
+ struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+ struct lpfc_fcf_conn_hdr *conn_hdr;
+ struct lpfc_fcf_conn_rec *conn_rec;
+ uint32_t record_count;
+ int i;
+
+ /* Free the current connect table */
+ list_for_each_entry_safe(conn_entry, next_conn_entry,
+ &phba->fcf_conn_rec_list, list)
+ kfree(conn_entry);
+
+ conn_hdr = (struct lpfc_fcf_conn_hdr *) buff;
+ record_count = conn_hdr->length * sizeof(uint32_t)/
+ sizeof(struct lpfc_fcf_conn_rec);
+
+ conn_rec = (struct lpfc_fcf_conn_rec *)
+ (buff + sizeof(struct lpfc_fcf_conn_hdr));
+
+ for (i = 0; i < record_count; i++) {
+ if (!(conn_rec[i].flags & FCFCNCT_VALID))
+ continue;
+ conn_entry = kzalloc(sizeof(struct lpfc_fcf_conn_entry),
+ GFP_KERNEL);
+ if (!conn_entry) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2566 Failed to allocate connection"
+ " table entry\n");
+ return;
+ }
+
+ memcpy(&conn_entry->conn_rec, &conn_rec[i],
+ sizeof(struct lpfc_fcf_conn_rec));
+ conn_entry->conn_rec.vlan_tag =
+ le16_to_cpu(conn_entry->conn_rec.vlan_tag) & 0xFFF;
+ conn_entry->conn_rec.flags =
+ le16_to_cpu(conn_entry->conn_rec.flags);
+ list_add_tail(&conn_entry->list,
+ &phba->fcf_conn_rec_list);
+ }
+}
+
+/**
+ * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
+ * @phba: Pointer to hba context object.
+ * @buff: Buffer containing the FCoE parameter data structure.
+ *
+ * This function update driver data structure with config
+ * parameters read from config region 23.
+ */
+static void
+lpfc_read_fcoe_param(struct lpfc_hba *phba,
+ uint8_t *buff)
+{
+ struct lpfc_fip_param_hdr *fcoe_param_hdr;
+ struct lpfc_fcoe_params *fcoe_param;
+
+ fcoe_param_hdr = (struct lpfc_fip_param_hdr *)
+ buff;
+ fcoe_param = (struct lpfc_fcoe_params *)
+ buff + sizeof(struct lpfc_fip_param_hdr);
+
+ if ((fcoe_param_hdr->parm_version != FIPP_VERSION) ||
+ (fcoe_param_hdr->length != FCOE_PARAM_LENGTH))
+ return;
+
+ if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+ FIPP_MODE_ON)
+ phba->cfg_enable_fip = 1;
+
+ if (bf_get(lpfc_fip_param_hdr_fipp_mode, fcoe_param_hdr) ==
+ FIPP_MODE_OFF)
+ phba->cfg_enable_fip = 0;
+
+ if (fcoe_param_hdr->parm_flags & FIPP_VLAN_VALID) {
+ phba->valid_vlan = 1;
+ phba->vlan_id = le16_to_cpu(fcoe_param->vlan_tag) &
+ 0xFFF;
+ }
+
+ phba->fc_map[0] = fcoe_param->fc_map[0];
+ phba->fc_map[1] = fcoe_param->fc_map[1];
+ phba->fc_map[2] = fcoe_param->fc_map[2];
+ return;
+}
+
+/**
+ * lpfc_get_rec_conf23 - Get a record type in config region data.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ * @rec_type: Record type to be searched.
+ *
+ * This function searches config region data to find the begining
+ * of the record specified by record_type. If record found, this
+ * function return pointer to the record else return NULL.
+ */
+static uint8_t *
+lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type)
+{
+ uint32_t offset = 0, rec_length;
+
+ if ((buff[0] == LPFC_REGION23_LAST_REC) ||
+ (size < sizeof(uint32_t)))
+ return NULL;
+
+ rec_length = buff[offset + 1];
+
+ /*
+ * One TLV record has one word header and number of data words
+ * specified in the rec_length field of the record header.
+ */
+ while ((offset + rec_length * sizeof(uint32_t) + sizeof(uint32_t))
+ <= size) {
+ if (buff[offset] == rec_type)
+ return &buff[offset];
+
+ if (buff[offset] == LPFC_REGION23_LAST_REC)
+ return NULL;
+
+ offset += rec_length * sizeof(uint32_t) + sizeof(uint32_t);
+ rec_length = buff[offset + 1];
+ }
+ return NULL;
+}
+
+/**
+ * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
+ * @phba: Pointer to lpfc_hba data structure.
+ * @buff: Buffer containing config region 23 data.
+ * @size: Size of the data buffer.
+ *
+ * This fuction parse the FCoE config parameters in config region 23 and
+ * populate driver data structure with the parameters.
+ */
+void
+lpfc_parse_fcoe_conf(struct lpfc_hba *phba,
+ uint8_t *buff,
+ uint32_t size)
+{
+ uint32_t offset = 0, rec_length;
+ uint8_t *rec_ptr;
+
+ /*
+ * If data size is less than 2 words signature and version cannot be
+ * verified.
+ */
+ if (size < 2*sizeof(uint32_t))
+ return;
+
+ /* Check the region signature first */
+ if (memcmp(buff, LPFC_REGION23_SIGNATURE, 4)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2567 Config region 23 has bad signature\n");
+ return;
+ }
+
+ offset += 4;
+
+ /* Check the data structure version */
+ if (buff[offset] != LPFC_REGION23_VERSION) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2568 Config region 23 has bad version\n");
+ return;
+ }
+ offset += 4;
+
+ rec_length = buff[offset + 1];
+
+ /* Read FCoE param record */
+ rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+ size - offset, FCOE_PARAM_TYPE);
+ if (rec_ptr)
+ lpfc_read_fcoe_param(phba, rec_ptr);
+
+ /* Read FCF connection table */
+ rec_ptr = lpfc_get_rec_conf23(&buff[offset],
+ size - offset, FCOE_CONN_TBL_TYPE);
+ if (rec_ptr)
+ lpfc_read_fcf_conn_tbl(phba, rec_ptr);
+
+}
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 4168c7b..02aa016 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -471,6 +471,35 @@
};
/*
+ * Virtual Fabric Tagging Header
+ */
+struct fc_vft_header {
+ uint32_t word0;
+#define fc_vft_hdr_r_ctl_SHIFT 24
+#define fc_vft_hdr_r_ctl_MASK 0xFF
+#define fc_vft_hdr_r_ctl_WORD word0
+#define fc_vft_hdr_ver_SHIFT 22
+#define fc_vft_hdr_ver_MASK 0x3
+#define fc_vft_hdr_ver_WORD word0
+#define fc_vft_hdr_type_SHIFT 18
+#define fc_vft_hdr_type_MASK 0xF
+#define fc_vft_hdr_type_WORD word0
+#define fc_vft_hdr_e_SHIFT 16
+#define fc_vft_hdr_e_MASK 0x1
+#define fc_vft_hdr_e_WORD word0
+#define fc_vft_hdr_priority_SHIFT 13
+#define fc_vft_hdr_priority_MASK 0x7
+#define fc_vft_hdr_priority_WORD word0
+#define fc_vft_hdr_vf_id_SHIFT 1
+#define fc_vft_hdr_vf_id_MASK 0xFFF
+#define fc_vft_hdr_vf_id_WORD word0
+ uint32_t word1;
+#define fc_vft_hdr_hopct_SHIFT 24
+#define fc_vft_hdr_hopct_MASK 0xFF
+#define fc_vft_hdr_hopct_WORD word1
+};
+
+/*
* Extended Link Service LS_COMMAND codes (Payload Word 0)
*/
#ifdef __BIG_ENDIAN_BITFIELD
@@ -1152,6 +1181,9 @@
#define PCI_DEVICE_ID_HORNET 0xfe05
#define PCI_DEVICE_ID_ZEPHYR_SCSP 0xfe11
#define PCI_DEVICE_ID_ZEPHYR_DCSP 0xfe12
+#define PCI_VENDOR_ID_SERVERENGINE 0x19a2
+#define PCI_DEVICE_ID_TIGERSHARK 0x0704
+#define PCI_DEVICE_ID_TIGERSHARK_S 0x0705
#define JEDEC_ID_ADDRESS 0x0080001c
#define FIREFLY_JEDEC_ID 0x1ACC
@@ -1342,15 +1374,21 @@
#define MBX_READ_LA64 0x95
#define MBX_REG_VPI 0x96
#define MBX_UNREG_VPI 0x97
-#define MBX_REG_VNPID 0x96
-#define MBX_UNREG_VNPID 0x97
#define MBX_WRITE_WWN 0x98
#define MBX_SET_DEBUG 0x99
#define MBX_LOAD_EXP_ROM 0x9C
-
-#define MBX_MAX_CMDS 0x9D
+#define MBX_SLI4_CONFIG 0x9B
+#define MBX_SLI4_REQ_FTRS 0x9D
+#define MBX_MAX_CMDS 0x9E
+#define MBX_RESUME_RPI 0x9E
#define MBX_SLI2_CMD_MASK 0x80
+#define MBX_REG_VFI 0x9F
+#define MBX_REG_FCFI 0xA0
+#define MBX_UNREG_VFI 0xA1
+#define MBX_UNREG_FCFI 0xA2
+#define MBX_INIT_VFI 0xA3
+#define MBX_INIT_VPI 0xA4
/* IOCB Commands */
@@ -1440,6 +1478,16 @@
#define CMD_IOCB_LOGENTRY_CN 0x94
#define CMD_IOCB_LOGENTRY_ASYNC_CN 0x96
+/* Unhandled Data Security SLI Commands */
+#define DSSCMD_IWRITE64_CR 0xD8
+#define DSSCMD_IWRITE64_CX 0xD9
+#define DSSCMD_IREAD64_CR 0xDA
+#define DSSCMD_IREAD64_CX 0xDB
+#define DSSCMD_INVALIDATE_DEK 0xDC
+#define DSSCMD_SET_KEK 0xDD
+#define DSSCMD_GET_KEK_ID 0xDE
+#define DSSCMD_GEN_XFER 0xDF
+
#define CMD_MAX_IOCB_CMD 0xE6
#define CMD_IOCB_MASK 0xff
@@ -1466,6 +1514,7 @@
#define MBXERR_BAD_RCV_LENGTH 14
#define MBXERR_DMA_ERROR 15
#define MBXERR_ERROR 16
+#define MBXERR_LINK_DOWN 0x33
#define MBX_NOT_FINISHED 255
#define MBX_BUSY 0xffffff /* Attempted cmd to busy Mailbox */
@@ -1504,32 +1553,6 @@
#endif
};
-struct ulp_bde64 { /* SLI-2 */
- union ULP_BDE_TUS {
- uint32_t w;
- struct {
-#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
- VALUE !! */
- uint32_t bdeSize:24; /* Size of buffer (in bytes) */
-#else /* __LITTLE_ENDIAN_BITFIELD */
- uint32_t bdeSize:24; /* Size of buffer (in bytes) */
- uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
- VALUE !! */
-#endif
-#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
-#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
-#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
-#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
-#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
-#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
-#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
- } f;
- } tus;
- uint32_t addrLow;
- uint32_t addrHigh;
-};
-
typedef struct ULP_BDL { /* SLI-2 */
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t bdeFlags:8; /* BDL Flags */
@@ -2287,7 +2310,7 @@
uint32_t rsvd3;
uint32_t rsvd4;
uint32_t rsvd5;
- uint16_t rsvd6;
+ uint16_t vfi;
uint16_t vpi;
#else /* __LITTLE_ENDIAN */
uint32_t rsvd1;
@@ -2297,7 +2320,7 @@
uint32_t rsvd4;
uint32_t rsvd5;
uint16_t vpi;
- uint16_t rsvd6;
+ uint16_t vfi;
#endif
} REG_VPI_VAR;
@@ -2457,7 +2480,7 @@
uint32_t entry_index:16;
#endif
- uint32_t rsvd1;
+ uint32_t sli4_length;
uint32_t word_cnt;
uint32_t resp_offset;
} DUMP_VAR;
@@ -2470,9 +2493,32 @@
#define DMP_RSP_OFFSET 0x14 /* word 5 contains first word of rsp */
#define DMP_RSP_SIZE 0x6C /* maximum of 27 words of rsp data */
+#define DMP_REGION_VPORT 0x16 /* VPort info region */
+#define DMP_VPORT_REGION_SIZE 0x200
+#define DMP_MBOX_OFFSET_WORD 0x5
+
+#define DMP_REGION_FCOEPARAM 0x17 /* fcoe param region */
+#define DMP_FCOEPARAM_RGN_SIZE 0x400
+
#define WAKE_UP_PARMS_REGION_ID 4
#define WAKE_UP_PARMS_WORD_SIZE 15
+struct vport_rec {
+ uint8_t wwpn[8];
+ uint8_t wwnn[8];
+};
+
+#define VPORT_INFO_SIG 0x32324752
+#define VPORT_INFO_REV_MASK 0xff
+#define VPORT_INFO_REV 0x1
+#define MAX_STATIC_VPORT_COUNT 16
+struct static_vport_info {
+ uint32_t signature;
+ uint32_t rev;
+ struct vport_rec vport_list[MAX_STATIC_VPORT_COUNT];
+ uint32_t resvd[66];
+};
+
/* Option rom version structure */
struct prog_id {
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2697,7 +2743,9 @@
#endif
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd1 : 23; /* Reserved */
+ uint32_t rsvd1 : 19; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd2 : 3; /* Reserved */
uint32_t cbg : 1; /* Configure BlockGuard */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t ccrp : 1; /* Config Command Ring Polling */
@@ -2717,10 +2765,14 @@
uint32_t ccrp : 1; /* Config Command Ring Polling */
uint32_t cmv : 1; /* Configure Max VPIs */
uint32_t cbg : 1; /* Configure BlockGuard */
- uint32_t rsvd1 : 23; /* Reserved */
+ uint32_t rsvd2 : 3; /* Reserved */
+ uint32_t cdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd1 : 19; /* Reserved */
#endif
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd2 : 23; /* Reserved */
+ uint32_t rsvd3 : 19; /* Reserved */
+ uint32_t gdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd4 : 3; /* Reserved */
uint32_t gbg : 1; /* Grant BlockGuard */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gcrp : 1; /* Grant Command Ring Polling */
@@ -2740,7 +2792,9 @@
uint32_t gcrp : 1; /* Grant Command Ring Polling */
uint32_t gmv : 1; /* Grant Max VPIs */
uint32_t gbg : 1; /* Grant BlockGuard */
- uint32_t rsvd2 : 23; /* Reserved */
+ uint32_t rsvd4 : 3; /* Reserved */
+ uint32_t gdss : 1; /* Configure Data Security SLI */
+ uint32_t rsvd3 : 19; /* Reserved */
#endif
#ifdef __BIG_ENDIAN_BITFIELD
@@ -2753,20 +2807,20 @@
#ifdef __BIG_ENDIAN_BITFIELD
uint32_t max_hbq : 16; /* Max HBQs Host expect to configure */
- uint32_t rsvd3 : 16; /* Max HBQs Host expect to configure */
+ uint32_t rsvd5 : 16; /* Max HBQs Host expect to configure */
#else /* __LITTLE_ENDIAN */
- uint32_t rsvd3 : 16; /* Max HBQs Host expect to configure */
+ uint32_t rsvd5 : 16; /* Max HBQs Host expect to configure */
uint32_t max_hbq : 16; /* Max HBQs Host expect to configure */
#endif
- uint32_t rsvd4; /* Reserved */
+ uint32_t rsvd6; /* Reserved */
#ifdef __BIG_ENDIAN_BITFIELD
- uint32_t rsvd5 : 16; /* Reserved */
+ uint32_t rsvd7 : 16; /* Reserved */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
#else /* __LITTLE_ENDIAN */
uint32_t max_vpi : 16; /* Max number of virt N-Ports */
- uint32_t rsvd5 : 16; /* Reserved */
+ uint32_t rsvd7 : 16; /* Reserved */
#endif
} CONFIG_PORT_VAR;
@@ -3666,3 +3720,5 @@
#define MENLO_TIMEOUT 30
#define SETVAR_MLOMNT 0x103107
#define SETVAR_MLORST 0x103007
+
+#define BPL_ALIGN_SZ 8 /* 8 byte alignment for bpl and mbufs */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
new file mode 100644
index 0000000..39c34b3
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -0,0 +1,2141 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2009 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+/* Macros to deal with bit fields. Each bit field must have 3 #defines
+ * associated with it (_SHIFT, _MASK, and _WORD).
+ * EG. For a bit field that is in the 7th bit of the "field4" field of a
+ * structure and is 2 bits in size the following #defines must exist:
+ * struct temp {
+ * uint32_t field1;
+ * uint32_t field2;
+ * uint32_t field3;
+ * uint32_t field4;
+ * #define example_bit_field_SHIFT 7
+ * #define example_bit_field_MASK 0x03
+ * #define example_bit_field_WORD field4
+ * uint32_t field5;
+ * };
+ * Then the macros below may be used to get or set the value of that field.
+ * EG. To get the value of the bit field from the above example:
+ * struct temp t1;
+ * value = bf_get(example_bit_field, &t1);
+ * And then to set that bit field:
+ * bf_set(example_bit_field, &t1, 2);
+ * Or clear that bit field:
+ * bf_set(example_bit_field, &t1, 0);
+ */
+#define bf_get(name, ptr) \
+ (((ptr)->name##_WORD >> name##_SHIFT) & name##_MASK)
+#define bf_set(name, ptr, value) \
+ ((ptr)->name##_WORD = ((((value) & name##_MASK) << name##_SHIFT) | \
+ ((ptr)->name##_WORD & ~(name##_MASK << name##_SHIFT))))
+
+struct dma_address {
+ uint32_t addr_lo;
+ uint32_t addr_hi;
+};
+
+#define LPFC_SLI4_BAR0 1
+#define LPFC_SLI4_BAR1 2
+#define LPFC_SLI4_BAR2 4
+
+#define LPFC_SLI4_MBX_EMBED true
+#define LPFC_SLI4_MBX_NEMBED false
+
+#define LPFC_SLI4_MB_WORD_COUNT 64
+#define LPFC_MAX_MQ_PAGE 8
+#define LPFC_MAX_WQ_PAGE 8
+#define LPFC_MAX_CQ_PAGE 4
+#define LPFC_MAX_EQ_PAGE 8
+
+#define LPFC_VIR_FUNC_MAX 32 /* Maximum number of virtual functions */
+#define LPFC_PCI_FUNC_MAX 5 /* Maximum number of PCI functions */
+#define LPFC_VFR_PAGE_SIZE 0x1000 /* 4KB BAR2 per-VF register page size */
+
+/* Define SLI4 Alignment requirements. */
+#define LPFC_ALIGN_16_BYTE 16
+#define LPFC_ALIGN_64_BYTE 64
+
+/* Define SLI4 specific definitions. */
+#define LPFC_MQ_CQE_BYTE_OFFSET 256
+#define LPFC_MBX_CMD_HDR_LENGTH 16
+#define LPFC_MBX_ERROR_RANGE 0x4000
+#define LPFC_BMBX_BIT1_ADDR_HI 0x2
+#define LPFC_BMBX_BIT1_ADDR_LO 0
+#define LPFC_RPI_HDR_COUNT 64
+#define LPFC_HDR_TEMPLATE_SIZE 4096
+#define LPFC_RPI_ALLOC_ERROR 0xFFFF
+#define LPFC_FCF_RECORD_WD_CNT 132
+#define LPFC_ENTIRE_FCF_DATABASE 0
+#define LPFC_DFLT_FCF_INDEX 0
+
+/* Virtual function numbers */
+#define LPFC_VF0 0
+#define LPFC_VF1 1
+#define LPFC_VF2 2
+#define LPFC_VF3 3
+#define LPFC_VF4 4
+#define LPFC_VF5 5
+#define LPFC_VF6 6
+#define LPFC_VF7 7
+#define LPFC_VF8 8
+#define LPFC_VF9 9
+#define LPFC_VF10 10
+#define LPFC_VF11 11
+#define LPFC_VF12 12
+#define LPFC_VF13 13
+#define LPFC_VF14 14
+#define LPFC_VF15 15
+#define LPFC_VF16 16
+#define LPFC_VF17 17
+#define LPFC_VF18 18
+#define LPFC_VF19 19
+#define LPFC_VF20 20
+#define LPFC_VF21 21
+#define LPFC_VF22 22
+#define LPFC_VF23 23
+#define LPFC_VF24 24
+#define LPFC_VF25 25
+#define LPFC_VF26 26
+#define LPFC_VF27 27
+#define LPFC_VF28 28
+#define LPFC_VF29 29
+#define LPFC_VF30 30
+#define LPFC_VF31 31
+
+/* PCI function numbers */
+#define LPFC_PCI_FUNC0 0
+#define LPFC_PCI_FUNC1 1
+#define LPFC_PCI_FUNC2 2
+#define LPFC_PCI_FUNC3 3
+#define LPFC_PCI_FUNC4 4
+
+/* Active interrupt test count */
+#define LPFC_ACT_INTR_CNT 4
+
+/* Delay Multiplier constant */
+#define LPFC_DMULT_CONST 651042
+#define LPFC_MIM_IMAX 636
+#define LPFC_FP_DEF_IMAX 10000
+#define LPFC_SP_DEF_IMAX 10000
+
+struct ulp_bde64 {
+ union ULP_BDE_TUS {
+ uint32_t w;
+ struct {
+#ifdef __BIG_ENDIAN_BITFIELD
+ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
+ VALUE !! */
+ uint32_t bdeSize:24; /* Size of buffer (in bytes) */
+#else /* __LITTLE_ENDIAN_BITFIELD */
+ uint32_t bdeSize:24; /* Size of buffer (in bytes) */
+ uint32_t bdeFlags:8; /* BDE Flags 0 IS A SUPPORTED
+ VALUE !! */
+#endif
+#define BUFF_TYPE_BDE_64 0x00 /* BDE (Host_resident) */
+#define BUFF_TYPE_BDE_IMMED 0x01 /* Immediate Data BDE */
+#define BUFF_TYPE_BDE_64P 0x02 /* BDE (Port-resident) */
+#define BUFF_TYPE_BDE_64I 0x08 /* Input BDE (Host-resident) */
+#define BUFF_TYPE_BDE_64IP 0x0A /* Input BDE (Port-resident) */
+#define BUFF_TYPE_BLP_64 0x40 /* BLP (Host-resident) */
+#define BUFF_TYPE_BLP_64P 0x42 /* BLP (Port-resident) */
+ } f;
+ } tus;
+ uint32_t addrLow;
+ uint32_t addrHigh;
+};
+
+struct lpfc_sli4_flags {
+ uint32_t word0;
+#define lpfc_fip_flag_SHIFT 0
+#define lpfc_fip_flag_MASK 0x00000001
+#define lpfc_fip_flag_WORD word0
+};
+
+/* event queue entry structure */
+struct lpfc_eqe {
+ uint32_t word0;
+#define lpfc_eqe_resource_id_SHIFT 16
+#define lpfc_eqe_resource_id_MASK 0x000000FF
+#define lpfc_eqe_resource_id_WORD word0
+#define lpfc_eqe_minor_code_SHIFT 4
+#define lpfc_eqe_minor_code_MASK 0x00000FFF
+#define lpfc_eqe_minor_code_WORD word0
+#define lpfc_eqe_major_code_SHIFT 1
+#define lpfc_eqe_major_code_MASK 0x00000007
+#define lpfc_eqe_major_code_WORD word0
+#define lpfc_eqe_valid_SHIFT 0
+#define lpfc_eqe_valid_MASK 0x00000001
+#define lpfc_eqe_valid_WORD word0
+};
+
+/* completion queue entry structure (common fields for all cqe types) */
+struct lpfc_cqe {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t reserved2;
+ uint32_t word3;
+#define lpfc_cqe_valid_SHIFT 31
+#define lpfc_cqe_valid_MASK 0x00000001
+#define lpfc_cqe_valid_WORD word3
+#define lpfc_cqe_code_SHIFT 16
+#define lpfc_cqe_code_MASK 0x000000FF
+#define lpfc_cqe_code_WORD word3
+};
+
+/* Completion Queue Entry Status Codes */
+#define CQE_STATUS_SUCCESS 0x0
+#define CQE_STATUS_FCP_RSP_FAILURE 0x1
+#define CQE_STATUS_REMOTE_STOP 0x2
+#define CQE_STATUS_LOCAL_REJECT 0x3
+#define CQE_STATUS_NPORT_RJT 0x4
+#define CQE_STATUS_FABRIC_RJT 0x5
+#define CQE_STATUS_NPORT_BSY 0x6
+#define CQE_STATUS_FABRIC_BSY 0x7
+#define CQE_STATUS_INTERMED_RSP 0x8
+#define CQE_STATUS_LS_RJT 0x9
+#define CQE_STATUS_CMD_REJECT 0xb
+#define CQE_STATUS_FCP_TGT_LENCHECK 0xc
+#define CQE_STATUS_NEED_BUFF_ENTRY 0xf
+
+/* Status returned by hardware (valid only if status = CQE_STATUS_SUCCESS). */
+#define CQE_HW_STATUS_NO_ERR 0x0
+#define CQE_HW_STATUS_UNDERRUN 0x1
+#define CQE_HW_STATUS_OVERRUN 0x2
+
+/* Completion Queue Entry Codes */
+#define CQE_CODE_COMPL_WQE 0x1
+#define CQE_CODE_RELEASE_WQE 0x2
+#define CQE_CODE_RECEIVE 0x4
+#define CQE_CODE_XRI_ABORTED 0x5
+
+/* completion queue entry for wqe completions */
+struct lpfc_wcqe_complete {
+ uint32_t word0;
+#define lpfc_wcqe_c_request_tag_SHIFT 16
+#define lpfc_wcqe_c_request_tag_MASK 0x0000FFFF
+#define lpfc_wcqe_c_request_tag_WORD word0
+#define lpfc_wcqe_c_status_SHIFT 8
+#define lpfc_wcqe_c_status_MASK 0x000000FF
+#define lpfc_wcqe_c_status_WORD word0
+#define lpfc_wcqe_c_hw_status_SHIFT 0
+#define lpfc_wcqe_c_hw_status_MASK 0x000000FF
+#define lpfc_wcqe_c_hw_status_WORD word0
+ uint32_t total_data_placed;
+ uint32_t parameter;
+ uint32_t word3;
+#define lpfc_wcqe_c_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_c_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_c_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_c_xb_SHIFT 28
+#define lpfc_wcqe_c_xb_MASK 0x00000001
+#define lpfc_wcqe_c_xb_WORD word3
+#define lpfc_wcqe_c_pv_SHIFT 27
+#define lpfc_wcqe_c_pv_MASK 0x00000001
+#define lpfc_wcqe_c_pv_WORD word3
+#define lpfc_wcqe_c_priority_SHIFT 24
+#define lpfc_wcqe_c_priority_MASK 0x00000007
+#define lpfc_wcqe_c_priority_WORD word3
+#define lpfc_wcqe_c_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_c_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_c_code_WORD lpfc_cqe_code_WORD
+};
+
+/* completion queue entry for wqe release */
+struct lpfc_wcqe_release {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_wcqe_r_wq_id_SHIFT 16
+#define lpfc_wcqe_r_wq_id_MASK 0x0000FFFF
+#define lpfc_wcqe_r_wq_id_WORD word2
+#define lpfc_wcqe_r_wqe_index_SHIFT 0
+#define lpfc_wcqe_r_wqe_index_MASK 0x0000FFFF
+#define lpfc_wcqe_r_wqe_index_WORD word2
+ uint32_t word3;
+#define lpfc_wcqe_r_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_r_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_r_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_r_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_r_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_r_code_WORD lpfc_cqe_code_WORD
+};
+
+struct sli4_wcqe_xri_aborted {
+ uint32_t word0;
+#define lpfc_wcqe_xa_status_SHIFT 8
+#define lpfc_wcqe_xa_status_MASK 0x000000FF
+#define lpfc_wcqe_xa_status_WORD word0
+ uint32_t parameter;
+ uint32_t word2;
+#define lpfc_wcqe_xa_remote_xid_SHIFT 16
+#define lpfc_wcqe_xa_remote_xid_MASK 0x0000FFFF
+#define lpfc_wcqe_xa_remote_xid_WORD word2
+#define lpfc_wcqe_xa_xri_SHIFT 0
+#define lpfc_wcqe_xa_xri_MASK 0x0000FFFF
+#define lpfc_wcqe_xa_xri_WORD word2
+ uint32_t word3;
+#define lpfc_wcqe_xa_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_wcqe_xa_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_wcqe_xa_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_wcqe_xa_ia_SHIFT 30
+#define lpfc_wcqe_xa_ia_MASK 0x00000001
+#define lpfc_wcqe_xa_ia_WORD word3
+#define CQE_XRI_ABORTED_IA_REMOTE 0
+#define CQE_XRI_ABORTED_IA_LOCAL 1
+#define lpfc_wcqe_xa_br_SHIFT 29
+#define lpfc_wcqe_xa_br_MASK 0x00000001
+#define lpfc_wcqe_xa_br_WORD word3
+#define CQE_XRI_ABORTED_BR_BA_ACC 0
+#define CQE_XRI_ABORTED_BR_BA_RJT 1
+#define lpfc_wcqe_xa_eo_SHIFT 28
+#define lpfc_wcqe_xa_eo_MASK 0x00000001
+#define lpfc_wcqe_xa_eo_WORD word3
+#define CQE_XRI_ABORTED_EO_REMOTE 0
+#define CQE_XRI_ABORTED_EO_LOCAL 1
+#define lpfc_wcqe_xa_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_wcqe_xa_code_MASK lpfc_cqe_code_MASK
+#define lpfc_wcqe_xa_code_WORD lpfc_cqe_code_WORD
+};
+
+/* completion queue entry structure for rqe completion */
+struct lpfc_rcqe {
+ uint32_t word0;
+#define lpfc_rcqe_bindex_SHIFT 16
+#define lpfc_rcqe_bindex_MASK 0x0000FFF
+#define lpfc_rcqe_bindex_WORD word0
+#define lpfc_rcqe_status_SHIFT 8
+#define lpfc_rcqe_status_MASK 0x000000FF
+#define lpfc_rcqe_status_WORD word0
+#define FC_STATUS_RQ_SUCCESS 0x10 /* Async receive successful */
+#define FC_STATUS_RQ_BUF_LEN_EXCEEDED 0x11 /* payload truncated */
+#define FC_STATUS_INSUFF_BUF_NEED_BUF 0x12 /* Insufficient buffers */
+#define FC_STATUS_INSUFF_BUF_FRM_DISC 0x13 /* Frame Discard */
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_rcqe_length_SHIFT 16
+#define lpfc_rcqe_length_MASK 0x0000FFFF
+#define lpfc_rcqe_length_WORD word2
+#define lpfc_rcqe_rq_id_SHIFT 6
+#define lpfc_rcqe_rq_id_MASK 0x000003FF
+#define lpfc_rcqe_rq_id_WORD word2
+#define lpfc_rcqe_fcf_id_SHIFT 0
+#define lpfc_rcqe_fcf_id_MASK 0x0000003F
+#define lpfc_rcqe_fcf_id_WORD word2
+ uint32_t word3;
+#define lpfc_rcqe_valid_SHIFT lpfc_cqe_valid_SHIFT
+#define lpfc_rcqe_valid_MASK lpfc_cqe_valid_MASK
+#define lpfc_rcqe_valid_WORD lpfc_cqe_valid_WORD
+#define lpfc_rcqe_port_SHIFT 30
+#define lpfc_rcqe_port_MASK 0x00000001
+#define lpfc_rcqe_port_WORD word3
+#define lpfc_rcqe_hdr_length_SHIFT 24
+#define lpfc_rcqe_hdr_length_MASK 0x0000001F
+#define lpfc_rcqe_hdr_length_WORD word3
+#define lpfc_rcqe_code_SHIFT lpfc_cqe_code_SHIFT
+#define lpfc_rcqe_code_MASK lpfc_cqe_code_MASK
+#define lpfc_rcqe_code_WORD lpfc_cqe_code_WORD
+#define lpfc_rcqe_eof_SHIFT 8
+#define lpfc_rcqe_eof_MASK 0x000000FF
+#define lpfc_rcqe_eof_WORD word3
+#define FCOE_EOFn 0x41
+#define FCOE_EOFt 0x42
+#define FCOE_EOFni 0x49
+#define FCOE_EOFa 0x50
+#define lpfc_rcqe_sof_SHIFT 0
+#define lpfc_rcqe_sof_MASK 0x000000FF
+#define lpfc_rcqe_sof_WORD word3
+#define FCOE_SOFi2 0x2d
+#define FCOE_SOFi3 0x2e
+#define FCOE_SOFn2 0x35
+#define FCOE_SOFn3 0x36
+};
+
+struct lpfc_wqe_generic{
+ struct ulp_bde64 bde;
+ uint32_t word3;
+ uint32_t word4;
+ uint32_t word5;
+ uint32_t word6;
+#define lpfc_wqe_gen_context_SHIFT 16
+#define lpfc_wqe_gen_context_MASK 0x0000FFFF
+#define lpfc_wqe_gen_context_WORD word6
+#define lpfc_wqe_gen_xri_SHIFT 0
+#define lpfc_wqe_gen_xri_MASK 0x0000FFFF
+#define lpfc_wqe_gen_xri_WORD word6
+ uint32_t word7;
+#define lpfc_wqe_gen_lnk_SHIFT 23
+#define lpfc_wqe_gen_lnk_MASK 0x00000001
+#define lpfc_wqe_gen_lnk_WORD word7
+#define lpfc_wqe_gen_erp_SHIFT 22
+#define lpfc_wqe_gen_erp_MASK 0x00000001
+#define lpfc_wqe_gen_erp_WORD word7
+#define lpfc_wqe_gen_pu_SHIFT 20
+#define lpfc_wqe_gen_pu_MASK 0x00000003
+#define lpfc_wqe_gen_pu_WORD word7
+#define lpfc_wqe_gen_class_SHIFT 16
+#define lpfc_wqe_gen_class_MASK 0x00000007
+#define lpfc_wqe_gen_class_WORD word7
+#define lpfc_wqe_gen_command_SHIFT 8
+#define lpfc_wqe_gen_command_MASK 0x000000FF
+#define lpfc_wqe_gen_command_WORD word7
+#define lpfc_wqe_gen_status_SHIFT 4
+#define lpfc_wqe_gen_status_MASK 0x0000000F
+#define lpfc_wqe_gen_status_WORD word7
+#define lpfc_wqe_gen_ct_SHIFT 2
+#define lpfc_wqe_gen_ct_MASK 0x00000007
+#define lpfc_wqe_gen_ct_WORD word7
+ uint32_t abort_tag;
+ uint32_t word9;
+#define lpfc_wqe_gen_request_tag_SHIFT 0
+#define lpfc_wqe_gen_request_tag_MASK 0x0000FFFF
+#define lpfc_wqe_gen_request_tag_WORD word9
+ uint32_t word10;
+#define lpfc_wqe_gen_ccp_SHIFT 24
+#define lpfc_wqe_gen_ccp_MASK 0x000000FF
+#define lpfc_wqe_gen_ccp_WORD word10
+#define lpfc_wqe_gen_ccpe_SHIFT 23
+#define lpfc_wqe_gen_ccpe_MASK 0x00000001
+#define lpfc_wqe_gen_ccpe_WORD word10
+#define lpfc_wqe_gen_pv_SHIFT 19
+#define lpfc_wqe_gen_pv_MASK 0x00000001
+#define lpfc_wqe_gen_pv_WORD word10
+#define lpfc_wqe_gen_pri_SHIFT 16
+#define lpfc_wqe_gen_pri_MASK 0x00000007
+#define lpfc_wqe_gen_pri_WORD word10
+ uint32_t word11;
+#define lpfc_wqe_gen_cq_id_SHIFT 16
+#define lpfc_wqe_gen_cq_id_MASK 0x000003FF
+#define lpfc_wqe_gen_cq_id_WORD word11
+#define LPFC_WQE_CQ_ID_DEFAULT 0x3ff
+#define lpfc_wqe_gen_wqec_SHIFT 7
+#define lpfc_wqe_gen_wqec_MASK 0x00000001
+#define lpfc_wqe_gen_wqec_WORD word11
+#define lpfc_wqe_gen_cmd_type_SHIFT 0
+#define lpfc_wqe_gen_cmd_type_MASK 0x0000000F
+#define lpfc_wqe_gen_cmd_type_WORD word11
+ uint32_t payload[4];
+};
+
+struct lpfc_rqe {
+ uint32_t address_hi;
+ uint32_t address_lo;
+};
+
+/* buffer descriptors */
+struct lpfc_bde4 {
+ uint32_t addr_hi;
+ uint32_t addr_lo;
+ uint32_t word2;
+#define lpfc_bde4_last_SHIFT 31
+#define lpfc_bde4_last_MASK 0x00000001
+#define lpfc_bde4_last_WORD word2
+#define lpfc_bde4_sge_offset_SHIFT 0
+#define lpfc_bde4_sge_offset_MASK 0x000003FF
+#define lpfc_bde4_sge_offset_WORD word2
+ uint32_t word3;
+#define lpfc_bde4_length_SHIFT 0
+#define lpfc_bde4_length_MASK 0x000000FF
+#define lpfc_bde4_length_WORD word3
+};
+
+struct lpfc_register {
+ uint32_t word0;
+};
+
+#define LPFC_UERR_STATUS_HI 0x00A4
+#define LPFC_UERR_STATUS_LO 0x00A0
+#define LPFC_ONLINE0 0x00B0
+#define LPFC_ONLINE1 0x00B4
+#define LPFC_SCRATCHPAD 0x0058
+
+/* BAR0 Registers */
+#define LPFC_HST_STATE 0x00AC
+#define lpfc_hst_state_perr_SHIFT 31
+#define lpfc_hst_state_perr_MASK 0x1
+#define lpfc_hst_state_perr_WORD word0
+#define lpfc_hst_state_sfi_SHIFT 30
+#define lpfc_hst_state_sfi_MASK 0x1
+#define lpfc_hst_state_sfi_WORD word0
+#define lpfc_hst_state_nip_SHIFT 29
+#define lpfc_hst_state_nip_MASK 0x1
+#define lpfc_hst_state_nip_WORD word0
+#define lpfc_hst_state_ipc_SHIFT 28
+#define lpfc_hst_state_ipc_MASK 0x1
+#define lpfc_hst_state_ipc_WORD word0
+#define lpfc_hst_state_xrom_SHIFT 27
+#define lpfc_hst_state_xrom_MASK 0x1
+#define lpfc_hst_state_xrom_WORD word0
+#define lpfc_hst_state_dl_SHIFT 26
+#define lpfc_hst_state_dl_MASK 0x1
+#define lpfc_hst_state_dl_WORD word0
+#define lpfc_hst_state_port_status_SHIFT 0
+#define lpfc_hst_state_port_status_MASK 0xFFFF
+#define lpfc_hst_state_port_status_WORD word0
+
+#define LPFC_POST_STAGE_POWER_ON_RESET 0x0000
+#define LPFC_POST_STAGE_AWAITING_HOST_RDY 0x0001
+#define LPFC_POST_STAGE_HOST_RDY 0x0002
+#define LPFC_POST_STAGE_BE_RESET 0x0003
+#define LPFC_POST_STAGE_SEEPROM_CS_START 0x0100
+#define LPFC_POST_STAGE_SEEPROM_CS_DONE 0x0101
+#define LPFC_POST_STAGE_DDR_CONFIG_START 0x0200
+#define LPFC_POST_STAGE_DDR_CONFIG_DONE 0x0201
+#define LPFC_POST_STAGE_DDR_CALIBRATE_START 0x0300
+#define LPFC_POST_STAGE_DDR_CALIBRATE_DONE 0x0301
+#define LPFC_POST_STAGE_DDR_TEST_START 0x0400
+#define LPFC_POST_STAGE_DDR_TEST_DONE 0x0401
+#define LPFC_POST_STAGE_REDBOOT_INIT_START 0x0600
+#define LPFC_POST_STAGE_REDBOOT_INIT_DONE 0x0601
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_START 0x0700
+#define LPFC_POST_STAGE_FW_IMAGE_LOAD_DONE 0x0701
+#define LPFC_POST_STAGE_ARMFW_START 0x0800
+#define LPFC_POST_STAGE_DHCP_QUERY_START 0x0900
+#define LPFC_POST_STAGE_DHCP_QUERY_DONE 0x0901
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_START 0x0A00
+#define LPFC_POST_STAGE_BOOT_TARGET_DISCOVERY_DONE 0x0A01
+#define LPFC_POST_STAGE_RC_OPTION_SET 0x0B00
+#define LPFC_POST_STAGE_SWITCH_LINK 0x0B01
+#define LPFC_POST_STAGE_SEND_ICDS_MESSAGE 0x0B02
+#define LPFC_POST_STAGE_PERFROM_TFTP 0x0B03
+#define LPFC_POST_STAGE_PARSE_XML 0x0B04
+#define LPFC_POST_STAGE_DOWNLOAD_IMAGE 0x0B05
+#define LPFC_POST_STAGE_FLASH_IMAGE 0x0B06
+#define LPFC_POST_STAGE_RC_DONE 0x0B07
+#define LPFC_POST_STAGE_REBOOT_SYSTEM 0x0B08
+#define LPFC_POST_STAGE_MAC_ADDRESS 0x0C00
+#define LPFC_POST_STAGE_ARMFW_READY 0xC000
+#define LPFC_POST_STAGE_ARMFW_UE 0xF000
+
+#define lpfc_scratchpad_slirev_SHIFT 4
+#define lpfc_scratchpad_slirev_MASK 0xF
+#define lpfc_scratchpad_slirev_WORD word0
+#define lpfc_scratchpad_chiptype_SHIFT 8
+#define lpfc_scratchpad_chiptype_MASK 0xFF
+#define lpfc_scratchpad_chiptype_WORD word0
+#define lpfc_scratchpad_featurelevel1_SHIFT 16
+#define lpfc_scratchpad_featurelevel1_MASK 0xFF
+#define lpfc_scratchpad_featurelevel1_WORD word0
+#define lpfc_scratchpad_featurelevel2_SHIFT 24
+#define lpfc_scratchpad_featurelevel2_MASK 0xFF
+#define lpfc_scratchpad_featurelevel2_WORD word0
+
+/* BAR1 Registers */
+#define LPFC_IMR_MASK_ALL 0xFFFFFFFF
+#define LPFC_ISCR_CLEAR_ALL 0xFFFFFFFF
+
+#define LPFC_HST_ISR0 0x0C18
+#define LPFC_HST_ISR1 0x0C1C
+#define LPFC_HST_ISR2 0x0C20
+#define LPFC_HST_ISR3 0x0C24
+#define LPFC_HST_ISR4 0x0C28
+
+#define LPFC_HST_IMR0 0x0C48
+#define LPFC_HST_IMR1 0x0C4C
+#define LPFC_HST_IMR2 0x0C50
+#define LPFC_HST_IMR3 0x0C54
+#define LPFC_HST_IMR4 0x0C58
+
+#define LPFC_HST_ISCR0 0x0C78
+#define LPFC_HST_ISCR1 0x0C7C
+#define LPFC_HST_ISCR2 0x0C80
+#define LPFC_HST_ISCR3 0x0C84
+#define LPFC_HST_ISCR4 0x0C88
+
+#define LPFC_SLI4_INTR0 BIT0
+#define LPFC_SLI4_INTR1 BIT1
+#define LPFC_SLI4_INTR2 BIT2
+#define LPFC_SLI4_INTR3 BIT3
+#define LPFC_SLI4_INTR4 BIT4
+#define LPFC_SLI4_INTR5 BIT5
+#define LPFC_SLI4_INTR6 BIT6
+#define LPFC_SLI4_INTR7 BIT7
+#define LPFC_SLI4_INTR8 BIT8
+#define LPFC_SLI4_INTR9 BIT9
+#define LPFC_SLI4_INTR10 BIT10
+#define LPFC_SLI4_INTR11 BIT11
+#define LPFC_SLI4_INTR12 BIT12
+#define LPFC_SLI4_INTR13 BIT13
+#define LPFC_SLI4_INTR14 BIT14
+#define LPFC_SLI4_INTR15 BIT15
+#define LPFC_SLI4_INTR16 BIT16
+#define LPFC_SLI4_INTR17 BIT17
+#define LPFC_SLI4_INTR18 BIT18
+#define LPFC_SLI4_INTR19 BIT19
+#define LPFC_SLI4_INTR20 BIT20
+#define LPFC_SLI4_INTR21 BIT21
+#define LPFC_SLI4_INTR22 BIT22
+#define LPFC_SLI4_INTR23 BIT23
+#define LPFC_SLI4_INTR24 BIT24
+#define LPFC_SLI4_INTR25 BIT25
+#define LPFC_SLI4_INTR26 BIT26
+#define LPFC_SLI4_INTR27 BIT27
+#define LPFC_SLI4_INTR28 BIT28
+#define LPFC_SLI4_INTR29 BIT29
+#define LPFC_SLI4_INTR30 BIT30
+#define LPFC_SLI4_INTR31 BIT31
+
+/* BAR2 Registers */
+#define LPFC_RQ_DOORBELL 0x00A0
+#define lpfc_rq_doorbell_num_posted_SHIFT 16
+#define lpfc_rq_doorbell_num_posted_MASK 0x3FFF
+#define lpfc_rq_doorbell_num_posted_WORD word0
+#define LPFC_RQ_POST_BATCH 8 /* RQEs to post at one time */
+#define lpfc_rq_doorbell_id_SHIFT 0
+#define lpfc_rq_doorbell_id_MASK 0x03FF
+#define lpfc_rq_doorbell_id_WORD word0
+
+#define LPFC_WQ_DOORBELL 0x0040
+#define lpfc_wq_doorbell_num_posted_SHIFT 24
+#define lpfc_wq_doorbell_num_posted_MASK 0x00FF
+#define lpfc_wq_doorbell_num_posted_WORD word0
+#define lpfc_wq_doorbell_index_SHIFT 16
+#define lpfc_wq_doorbell_index_MASK 0x00FF
+#define lpfc_wq_doorbell_index_WORD word0
+#define lpfc_wq_doorbell_id_SHIFT 0
+#define lpfc_wq_doorbell_id_MASK 0xFFFF
+#define lpfc_wq_doorbell_id_WORD word0
+
+#define LPFC_EQCQ_DOORBELL 0x0120
+#define lpfc_eqcq_doorbell_arm_SHIFT 29
+#define lpfc_eqcq_doorbell_arm_MASK 0x0001
+#define lpfc_eqcq_doorbell_arm_WORD word0
+#define lpfc_eqcq_doorbell_num_released_SHIFT 16
+#define lpfc_eqcq_doorbell_num_released_MASK 0x1FFF
+#define lpfc_eqcq_doorbell_num_released_WORD word0
+#define lpfc_eqcq_doorbell_qt_SHIFT 10
+#define lpfc_eqcq_doorbell_qt_MASK 0x0001
+#define lpfc_eqcq_doorbell_qt_WORD word0
+#define LPFC_QUEUE_TYPE_COMPLETION 0
+#define LPFC_QUEUE_TYPE_EVENT 1
+#define lpfc_eqcq_doorbell_eqci_SHIFT 9
+#define lpfc_eqcq_doorbell_eqci_MASK 0x0001
+#define lpfc_eqcq_doorbell_eqci_WORD word0
+#define lpfc_eqcq_doorbell_cqid_SHIFT 0
+#define lpfc_eqcq_doorbell_cqid_MASK 0x03FF
+#define lpfc_eqcq_doorbell_cqid_WORD word0
+#define lpfc_eqcq_doorbell_eqid_SHIFT 0
+#define lpfc_eqcq_doorbell_eqid_MASK 0x01FF
+#define lpfc_eqcq_doorbell_eqid_WORD word0
+
+#define LPFC_BMBX 0x0160
+#define lpfc_bmbx_addr_SHIFT 2
+#define lpfc_bmbx_addr_MASK 0x3FFFFFFF
+#define lpfc_bmbx_addr_WORD word0
+#define lpfc_bmbx_hi_SHIFT 1
+#define lpfc_bmbx_hi_MASK 0x0001
+#define lpfc_bmbx_hi_WORD word0
+#define lpfc_bmbx_rdy_SHIFT 0
+#define lpfc_bmbx_rdy_MASK 0x0001
+#define lpfc_bmbx_rdy_WORD word0
+
+#define LPFC_MQ_DOORBELL 0x0140
+#define lpfc_mq_doorbell_num_posted_SHIFT 16
+#define lpfc_mq_doorbell_num_posted_MASK 0x3FFF
+#define lpfc_mq_doorbell_num_posted_WORD word0
+#define lpfc_mq_doorbell_id_SHIFT 0
+#define lpfc_mq_doorbell_id_MASK 0x03FF
+#define lpfc_mq_doorbell_id_WORD word0
+
+struct lpfc_sli4_cfg_mhdr {
+ uint32_t word1;
+#define lpfc_mbox_hdr_emb_SHIFT 0
+#define lpfc_mbox_hdr_emb_MASK 0x00000001
+#define lpfc_mbox_hdr_emb_WORD word1
+#define lpfc_mbox_hdr_sge_cnt_SHIFT 3
+#define lpfc_mbox_hdr_sge_cnt_MASK 0x0000001F
+#define lpfc_mbox_hdr_sge_cnt_WORD word1
+ uint32_t payload_length;
+ uint32_t tag_lo;
+ uint32_t tag_hi;
+ uint32_t reserved5;
+};
+
+union lpfc_sli4_cfg_shdr {
+ struct {
+ uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT 0
+#define lpfc_mbox_hdr_opcode_MASK 0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD word6
+#define lpfc_mbox_hdr_subsystem_SHIFT 8
+#define lpfc_mbox_hdr_subsystem_MASK 0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD word6
+#define lpfc_mbox_hdr_port_number_SHIFT 16
+#define lpfc_mbox_hdr_port_number_MASK 0x000000FF
+#define lpfc_mbox_hdr_port_number_WORD word6
+#define lpfc_mbox_hdr_domain_SHIFT 24
+#define lpfc_mbox_hdr_domain_MASK 0x000000FF
+#define lpfc_mbox_hdr_domain_WORD word6
+ uint32_t timeout;
+ uint32_t request_length;
+ uint32_t reserved9;
+ } request;
+ struct {
+ uint32_t word6;
+#define lpfc_mbox_hdr_opcode_SHIFT 0
+#define lpfc_mbox_hdr_opcode_MASK 0x000000FF
+#define lpfc_mbox_hdr_opcode_WORD word6
+#define lpfc_mbox_hdr_subsystem_SHIFT 8
+#define lpfc_mbox_hdr_subsystem_MASK 0x000000FF
+#define lpfc_mbox_hdr_subsystem_WORD word6
+#define lpfc_mbox_hdr_domain_SHIFT 24
+#define lpfc_mbox_hdr_domain_MASK 0x000000FF
+#define lpfc_mbox_hdr_domain_WORD word6
+ uint32_t word7;
+#define lpfc_mbox_hdr_status_SHIFT 0
+#define lpfc_mbox_hdr_status_MASK 0x000000FF
+#define lpfc_mbox_hdr_status_WORD word7
+#define lpfc_mbox_hdr_add_status_SHIFT 8
+#define lpfc_mbox_hdr_add_status_MASK 0x000000FF
+#define lpfc_mbox_hdr_add_status_WORD word7
+ uint32_t response_length;
+ uint32_t actual_response_length;
+ } response;
+};
+
+/* Mailbox structures */
+struct mbox_header {
+ struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+};
+
+/* Subsystem Definitions */
+#define LPFC_MBOX_SUBSYSTEM_COMMON 0x1
+#define LPFC_MBOX_SUBSYSTEM_FCOE 0xC
+
+/* Device Specific Definitions */
+
+/* The HOST ENDIAN defines are in Big Endian format. */
+#define HOST_ENDIAN_LOW_WORD0 0xFF3412FF
+#define HOST_ENDIAN_HIGH_WORD1 0xFF7856FF
+
+/* Common Opcodes */
+#define LPFC_MBOX_OPCODE_CQ_CREATE 0x0C
+#define LPFC_MBOX_OPCODE_EQ_CREATE 0x0D
+#define LPFC_MBOX_OPCODE_MQ_CREATE 0x15
+#define LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES 0x20
+#define LPFC_MBOX_OPCODE_NOP 0x21
+#define LPFC_MBOX_OPCODE_MQ_DESTROY 0x35
+#define LPFC_MBOX_OPCODE_CQ_DESTROY 0x36
+#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
+#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
+
+/* FCoE Opcodes */
+#define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE 0x01
+#define LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY 0x02
+#define LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES 0x03
+#define LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES 0x04
+#define LPFC_MBOX_OPCODE_FCOE_RQ_CREATE 0x05
+#define LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY 0x06
+#define LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE 0x08
+#define LPFC_MBOX_OPCODE_FCOE_ADD_FCF 0x09
+#define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A
+#define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B
+
+/* Mailbox command structures */
+struct eq_context {
+ uint32_t word0;
+#define lpfc_eq_context_size_SHIFT 31
+#define lpfc_eq_context_size_MASK 0x00000001
+#define lpfc_eq_context_size_WORD word0
+#define LPFC_EQE_SIZE_4 0x0
+#define LPFC_EQE_SIZE_16 0x1
+#define lpfc_eq_context_valid_SHIFT 29
+#define lpfc_eq_context_valid_MASK 0x00000001
+#define lpfc_eq_context_valid_WORD word0
+ uint32_t word1;
+#define lpfc_eq_context_count_SHIFT 26
+#define lpfc_eq_context_count_MASK 0x00000003
+#define lpfc_eq_context_count_WORD word1
+#define LPFC_EQ_CNT_256 0x0
+#define LPFC_EQ_CNT_512 0x1
+#define LPFC_EQ_CNT_1024 0x2
+#define LPFC_EQ_CNT_2048 0x3
+#define LPFC_EQ_CNT_4096 0x4
+ uint32_t word2;
+#define lpfc_eq_context_delay_multi_SHIFT 13
+#define lpfc_eq_context_delay_multi_MASK 0x000003FF
+#define lpfc_eq_context_delay_multi_WORD word2
+ uint32_t reserved3;
+};
+
+struct sgl_page_pairs {
+ uint32_t sgl_pg0_addr_lo;
+ uint32_t sgl_pg0_addr_hi;
+ uint32_t sgl_pg1_addr_lo;
+ uint32_t sgl_pg1_addr_hi;
+};
+
+struct lpfc_mbx_post_sgl_pages {
+ struct mbox_header header;
+ uint32_t word0;
+#define lpfc_post_sgl_pages_xri_SHIFT 0
+#define lpfc_post_sgl_pages_xri_MASK 0x0000FFFF
+#define lpfc_post_sgl_pages_xri_WORD word0
+#define lpfc_post_sgl_pages_xricnt_SHIFT 16
+#define lpfc_post_sgl_pages_xricnt_MASK 0x0000FFFF
+#define lpfc_post_sgl_pages_xricnt_WORD word0
+ struct sgl_page_pairs sgl_pg_pairs[1];
+};
+
+/* word0 of page-1 struct shares the same SHIFT/MASK/WORD defines as above */
+struct lpfc_mbx_post_uembed_sgl_page1 {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ uint32_t word0;
+ struct sgl_page_pairs sgl_pg_pairs;
+};
+
+struct lpfc_mbx_sge {
+ uint32_t pa_lo;
+ uint32_t pa_hi;
+ uint32_t length;
+};
+
+struct lpfc_mbx_nembed_cmd {
+ struct lpfc_sli4_cfg_mhdr cfg_mhdr;
+#define LPFC_SLI4_MBX_SGE_MAX_PAGES 19
+ struct lpfc_mbx_sge sge[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_nembed_sge_virt {
+ void *addr[LPFC_SLI4_MBX_SGE_MAX_PAGES];
+};
+
+struct lpfc_mbx_eq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_create_num_pages_SHIFT 0
+#define lpfc_mbx_eq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_eq_create_num_pages_WORD word0
+ struct eq_context context;
+ struct dma_address page[LPFC_MAX_EQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_create_q_id_SHIFT 0
+#define lpfc_mbx_eq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_eq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_eq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_eq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_eq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_eq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_nop {
+ struct mbox_header header;
+ uint32_t context[2];
+};
+
+struct cq_context {
+ uint32_t word0;
+#define lpfc_cq_context_event_SHIFT 31
+#define lpfc_cq_context_event_MASK 0x00000001
+#define lpfc_cq_context_event_WORD word0
+#define lpfc_cq_context_valid_SHIFT 29
+#define lpfc_cq_context_valid_MASK 0x00000001
+#define lpfc_cq_context_valid_WORD word0
+#define lpfc_cq_context_count_SHIFT 27
+#define lpfc_cq_context_count_MASK 0x00000003
+#define lpfc_cq_context_count_WORD word0
+#define LPFC_CQ_CNT_256 0x0
+#define LPFC_CQ_CNT_512 0x1
+#define LPFC_CQ_CNT_1024 0x2
+ uint32_t word1;
+#define lpfc_cq_eq_id_SHIFT 22
+#define lpfc_cq_eq_id_MASK 0x000000FF
+#define lpfc_cq_eq_id_WORD word1
+ uint32_t reserved0;
+ uint32_t reserved1;
+};
+
+struct lpfc_mbx_cq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_create_num_pages_SHIFT 0
+#define lpfc_mbx_cq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_cq_create_num_pages_WORD word0
+ struct cq_context context;
+ struct dma_address page[LPFC_MAX_CQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_create_q_id_SHIFT 0
+#define lpfc_mbx_cq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_cq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_cq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_cq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_cq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_cq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct wq_context {
+ uint32_t reserved0;
+ uint32_t reserved1;
+ uint32_t reserved2;
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_wq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_num_pages_SHIFT 0
+#define lpfc_mbx_wq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_num_pages_WORD word0
+#define lpfc_mbx_wq_create_cq_id_SHIFT 16
+#define lpfc_mbx_wq_create_cq_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_cq_id_WORD word0
+ struct dma_address page[LPFC_MAX_WQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_create_q_id_SHIFT 0
+#define lpfc_mbx_wq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_wq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_wq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_wq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_wq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+#define LPFC_HDR_BUF_SIZE 128
+#define LPFC_DATA_BUF_SIZE 4096
+struct rq_context {
+ uint32_t word0;
+#define lpfc_rq_context_rq_size_SHIFT 16
+#define lpfc_rq_context_rq_size_MASK 0x0000000F
+#define lpfc_rq_context_rq_size_WORD word0
+#define LPFC_RQ_RING_SIZE_512 9 /* 512 entries */
+#define LPFC_RQ_RING_SIZE_1024 10 /* 1024 entries */
+#define LPFC_RQ_RING_SIZE_2048 11 /* 2048 entries */
+#define LPFC_RQ_RING_SIZE_4096 12 /* 4096 entries */
+ uint32_t reserved1;
+ uint32_t word2;
+#define lpfc_rq_context_cq_id_SHIFT 16
+#define lpfc_rq_context_cq_id_MASK 0x000003FF
+#define lpfc_rq_context_cq_id_WORD word2
+#define lpfc_rq_context_buf_size_SHIFT 0
+#define lpfc_rq_context_buf_size_MASK 0x0000FFFF
+#define lpfc_rq_context_buf_size_WORD word2
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_rq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_create_num_pages_SHIFT 0
+#define lpfc_mbx_rq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_rq_create_num_pages_WORD word0
+ struct rq_context context;
+ struct dma_address page[LPFC_MAX_WQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_create_q_id_SHIFT 0
+#define lpfc_mbx_rq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_rq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_rq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_rq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_rq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_rq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct mq_context {
+ uint32_t word0;
+#define lpfc_mq_context_cq_id_SHIFT 22
+#define lpfc_mq_context_cq_id_MASK 0x000003FF
+#define lpfc_mq_context_cq_id_WORD word0
+#define lpfc_mq_context_count_SHIFT 16
+#define lpfc_mq_context_count_MASK 0x0000000F
+#define lpfc_mq_context_count_WORD word0
+#define LPFC_MQ_CNT_16 0x5
+#define LPFC_MQ_CNT_32 0x6
+#define LPFC_MQ_CNT_64 0x7
+#define LPFC_MQ_CNT_128 0x8
+ uint32_t word1;
+#define lpfc_mq_context_valid_SHIFT 31
+#define lpfc_mq_context_valid_MASK 0x00000001
+#define lpfc_mq_context_valid_WORD word1
+ uint32_t reserved2;
+ uint32_t reserved3;
+};
+
+struct lpfc_mbx_mq_create {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_create_num_pages_SHIFT 0
+#define lpfc_mbx_mq_create_num_pages_MASK 0x0000FFFF
+#define lpfc_mbx_mq_create_num_pages_WORD word0
+ struct mq_context context;
+ struct dma_address page[LPFC_MAX_MQ_PAGE];
+ } request;
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_create_q_id_SHIFT 0
+#define lpfc_mbx_mq_create_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_mq_create_q_id_WORD word0
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_mq_destroy {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word0;
+#define lpfc_mbx_mq_destroy_q_id_SHIFT 0
+#define lpfc_mbx_mq_destroy_q_id_MASK 0x0000FFFF
+#define lpfc_mbx_mq_destroy_q_id_WORD word0
+ } request;
+ struct {
+ uint32_t word0;
+ } response;
+ } u;
+};
+
+struct lpfc_mbx_post_hdr_tmpl {
+ struct mbox_header header;
+ uint32_t word10;
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_SHIFT 0
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_MASK 0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_rpi_offset_WORD word10
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_SHIFT 16
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_MASK 0x0000FFFF
+#define lpfc_mbx_post_hdr_tmpl_page_cnt_WORD word10
+ uint32_t rpi_paddr_lo;
+ uint32_t rpi_paddr_hi;
+};
+
+struct sli4_sge { /* SLI-4 */
+ uint32_t addr_hi;
+ uint32_t addr_lo;
+
+ uint32_t word2;
+#define lpfc_sli4_sge_offset_SHIFT 0 /* Offset of buffer - Not used*/
+#define lpfc_sli4_sge_offset_MASK 0x00FFFFFF
+#define lpfc_sli4_sge_offset_WORD word2
+#define lpfc_sli4_sge_last_SHIFT 31 /* Last SEG in the SGL sets
+ this flag !! */
+#define lpfc_sli4_sge_last_MASK 0x00000001
+#define lpfc_sli4_sge_last_WORD word2
+ uint32_t word3;
+#define lpfc_sli4_sge_len_SHIFT 0
+#define lpfc_sli4_sge_len_MASK 0x0001FFFF
+#define lpfc_sli4_sge_len_WORD word3
+};
+
+struct fcf_record {
+ uint32_t max_rcv_size;
+ uint32_t fka_adv_period;
+ uint32_t fip_priority;
+ uint32_t word3;
+#define lpfc_fcf_record_mac_0_SHIFT 0
+#define lpfc_fcf_record_mac_0_MASK 0x000000FF
+#define lpfc_fcf_record_mac_0_WORD word3
+#define lpfc_fcf_record_mac_1_SHIFT 8
+#define lpfc_fcf_record_mac_1_MASK 0x000000FF
+#define lpfc_fcf_record_mac_1_WORD word3
+#define lpfc_fcf_record_mac_2_SHIFT 16
+#define lpfc_fcf_record_mac_2_MASK 0x000000FF
+#define lpfc_fcf_record_mac_2_WORD word3
+#define lpfc_fcf_record_mac_3_SHIFT 24
+#define lpfc_fcf_record_mac_3_MASK 0x000000FF
+#define lpfc_fcf_record_mac_3_WORD word3
+ uint32_t word4;
+#define lpfc_fcf_record_mac_4_SHIFT 0
+#define lpfc_fcf_record_mac_4_MASK 0x000000FF
+#define lpfc_fcf_record_mac_4_WORD word4
+#define lpfc_fcf_record_mac_5_SHIFT 8
+#define lpfc_fcf_record_mac_5_MASK 0x000000FF
+#define lpfc_fcf_record_mac_5_WORD word4
+#define lpfc_fcf_record_fcf_avail_SHIFT 16
+#define lpfc_fcf_record_fcf_avail_MASK 0x000000FF
+#define lpfc_fcf_record_fc_avail_WORD word4
+#define lpfc_fcf_record_mac_addr_prov_SHIFT 24
+#define lpfc_fcf_record_mac_addr_prov_MASK 0x000000FF
+#define lpfc_fcf_record_mac_addr_prov_WORD word4
+#define LPFC_FCF_FPMA 1 /* Fabric Provided MAC Address */
+#define LPFC_FCF_SPMA 2 /* Server Provided MAC Address */
+ uint32_t word5;
+#define lpfc_fcf_record_fab_name_0_SHIFT 0
+#define lpfc_fcf_record_fab_name_0_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_0_WORD word5
+#define lpfc_fcf_record_fab_name_1_SHIFT 8
+#define lpfc_fcf_record_fab_name_1_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_1_WORD word5
+#define lpfc_fcf_record_fab_name_2_SHIFT 16
+#define lpfc_fcf_record_fab_name_2_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_2_WORD word5
+#define lpfc_fcf_record_fab_name_3_SHIFT 24
+#define lpfc_fcf_record_fab_name_3_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_3_WORD word5
+ uint32_t word6;
+#define lpfc_fcf_record_fab_name_4_SHIFT 0
+#define lpfc_fcf_record_fab_name_4_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_4_WORD word6
+#define lpfc_fcf_record_fab_name_5_SHIFT 8
+#define lpfc_fcf_record_fab_name_5_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_5_WORD word6
+#define lpfc_fcf_record_fab_name_6_SHIFT 16
+#define lpfc_fcf_record_fab_name_6_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_6_WORD word6
+#define lpfc_fcf_record_fab_name_7_SHIFT 24
+#define lpfc_fcf_record_fab_name_7_MASK 0x000000FF
+#define lpfc_fcf_record_fab_name_7_WORD word6
+ uint32_t word7;
+#define lpfc_fcf_record_fc_map_0_SHIFT 0
+#define lpfc_fcf_record_fc_map_0_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_0_WORD word7
+#define lpfc_fcf_record_fc_map_1_SHIFT 8
+#define lpfc_fcf_record_fc_map_1_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_1_WORD word7
+#define lpfc_fcf_record_fc_map_2_SHIFT 16
+#define lpfc_fcf_record_fc_map_2_MASK 0x000000FF
+#define lpfc_fcf_record_fc_map_2_WORD word7
+#define lpfc_fcf_record_fcf_valid_SHIFT 24
+#define lpfc_fcf_record_fcf_valid_MASK 0x000000FF
+#define lpfc_fcf_record_fcf_valid_WORD word7
+ uint32_t word8;
+#define lpfc_fcf_record_fcf_index_SHIFT 0
+#define lpfc_fcf_record_fcf_index_MASK 0x0000FFFF
+#define lpfc_fcf_record_fcf_index_WORD word8
+#define lpfc_fcf_record_fcf_state_SHIFT 16
+#define lpfc_fcf_record_fcf_state_MASK 0x0000FFFF
+#define lpfc_fcf_record_fcf_state_WORD word8
+ uint8_t vlan_bitmap[512];
+};
+
+struct lpfc_mbx_read_fcf_tbl {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ union {
+ struct {
+ uint32_t word10;
+#define lpfc_mbx_read_fcf_tbl_indx_SHIFT 0
+#define lpfc_mbx_read_fcf_tbl_indx_MASK 0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_indx_WORD word10
+ } request;
+ struct {
+ uint32_t eventag;
+ } response;
+ } u;
+ uint32_t word11;
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_SHIFT 0
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_MASK 0x0000FFFF
+#define lpfc_mbx_read_fcf_tbl_nxt_vindx_WORD word11
+};
+
+struct lpfc_mbx_add_fcf_tbl_entry {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ uint32_t word10;
+#define lpfc_mbx_add_fcf_tbl_fcfi_SHIFT 0
+#define lpfc_mbx_add_fcf_tbl_fcfi_MASK 0x0000FFFF
+#define lpfc_mbx_add_fcf_tbl_fcfi_WORD word10
+ struct lpfc_mbx_sge fcf_sge;
+};
+
+struct lpfc_mbx_del_fcf_tbl_entry {
+ struct mbox_header header;
+ uint32_t word10;
+#define lpfc_mbx_del_fcf_tbl_count_SHIFT 0
+#define lpfc_mbx_del_fcf_tbl_count_MASK 0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_count_WORD word10
+#define lpfc_mbx_del_fcf_tbl_index_SHIFT 16
+#define lpfc_mbx_del_fcf_tbl_index_MASK 0x0000FFFF
+#define lpfc_mbx_del_fcf_tbl_index_WORD word10
+};
+
+/* Status field for embedded SLI_CONFIG mailbox command */
+#define STATUS_SUCCESS 0x0
+#define STATUS_FAILED 0x1
+#define STATUS_ILLEGAL_REQUEST 0x2
+#define STATUS_ILLEGAL_FIELD 0x3
+#define STATUS_INSUFFICIENT_BUFFER 0x4
+#define STATUS_UNAUTHORIZED_REQUEST 0x5
+#define STATUS_FLASHROM_SAVE_FAILED 0x17
+#define STATUS_FLASHROM_RESTORE_FAILED 0x18
+#define STATUS_ICCBINDEX_ALLOC_FAILED 0x1a
+#define STATUS_IOCTLHANDLE_ALLOC_FAILED 0x1b
+#define STATUS_INVALID_PHY_ADDR_FROM_OSM 0x1c
+#define STATUS_INVALID_PHY_ADDR_LEN_FROM_OSM 0x1d
+#define STATUS_ASSERT_FAILED 0x1e
+#define STATUS_INVALID_SESSION 0x1f
+#define STATUS_INVALID_CONNECTION 0x20
+#define STATUS_BTL_PATH_EXCEEDS_OSM_LIMIT 0x21
+#define STATUS_BTL_NO_FREE_SLOT_PATH 0x24
+#define STATUS_BTL_NO_FREE_SLOT_TGTID 0x25
+#define STATUS_OSM_DEVSLOT_NOT_FOUND 0x26
+#define STATUS_FLASHROM_READ_FAILED 0x27
+#define STATUS_POLL_IOCTL_TIMEOUT 0x28
+#define STATUS_ERROR_ACITMAIN 0x2a
+#define STATUS_REBOOT_REQUIRED 0x2c
+#define STATUS_FCF_IN_USE 0x3a
+
+struct lpfc_mbx_sli4_config {
+ struct mbox_header header;
+};
+
+struct lpfc_mbx_init_vfi {
+ uint32_t word1;
+#define lpfc_init_vfi_vr_SHIFT 31
+#define lpfc_init_vfi_vr_MASK 0x00000001
+#define lpfc_init_vfi_vr_WORD word1
+#define lpfc_init_vfi_vt_SHIFT 30
+#define lpfc_init_vfi_vt_MASK 0x00000001
+#define lpfc_init_vfi_vt_WORD word1
+#define lpfc_init_vfi_vf_SHIFT 29
+#define lpfc_init_vfi_vf_MASK 0x00000001
+#define lpfc_init_vfi_vf_WORD word1
+#define lpfc_init_vfi_vfi_SHIFT 0
+#define lpfc_init_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_init_vfi_vfi_WORD word1
+ uint32_t word2;
+#define lpfc_init_vfi_fcfi_SHIFT 0
+#define lpfc_init_vfi_fcfi_MASK 0x0000FFFF
+#define lpfc_init_vfi_fcfi_WORD word2
+ uint32_t word3;
+#define lpfc_init_vfi_pri_SHIFT 13
+#define lpfc_init_vfi_pri_MASK 0x00000007
+#define lpfc_init_vfi_pri_WORD word3
+#define lpfc_init_vfi_vf_id_SHIFT 1
+#define lpfc_init_vfi_vf_id_MASK 0x00000FFF
+#define lpfc_init_vfi_vf_id_WORD word3
+ uint32_t word4;
+#define lpfc_init_vfi_hop_count_SHIFT 24
+#define lpfc_init_vfi_hop_count_MASK 0x000000FF
+#define lpfc_init_vfi_hop_count_WORD word4
+};
+
+struct lpfc_mbx_reg_vfi {
+ uint32_t word1;
+#define lpfc_reg_vfi_vp_SHIFT 28
+#define lpfc_reg_vfi_vp_MASK 0x00000001
+#define lpfc_reg_vfi_vp_WORD word1
+#define lpfc_reg_vfi_vfi_SHIFT 0
+#define lpfc_reg_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_vfi_WORD word1
+ uint32_t word2;
+#define lpfc_reg_vfi_vpi_SHIFT 16
+#define lpfc_reg_vfi_vpi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_vpi_WORD word2
+#define lpfc_reg_vfi_fcfi_SHIFT 0
+#define lpfc_reg_vfi_fcfi_MASK 0x0000FFFF
+#define lpfc_reg_vfi_fcfi_WORD word2
+ uint32_t word3_rsvd;
+ uint32_t word4_rsvd;
+ struct ulp_bde64 bde;
+ uint32_t word8_rsvd;
+ uint32_t word9_rsvd;
+ uint32_t word10;
+#define lpfc_reg_vfi_nport_id_SHIFT 0
+#define lpfc_reg_vfi_nport_id_MASK 0x00FFFFFF
+#define lpfc_reg_vfi_nport_id_WORD word10
+};
+
+struct lpfc_mbx_init_vpi {
+ uint32_t word1;
+#define lpfc_init_vpi_vfi_SHIFT 16
+#define lpfc_init_vpi_vfi_MASK 0x0000FFFF
+#define lpfc_init_vpi_vfi_WORD word1
+#define lpfc_init_vpi_vpi_SHIFT 0
+#define lpfc_init_vpi_vpi_MASK 0x0000FFFF
+#define lpfc_init_vpi_vpi_WORD word1
+};
+
+struct lpfc_mbx_read_vpi {
+ uint32_t word1_rsvd;
+ uint32_t word2;
+#define lpfc_mbx_read_vpi_vnportid_SHIFT 0
+#define lpfc_mbx_read_vpi_vnportid_MASK 0x00FFFFFF
+#define lpfc_mbx_read_vpi_vnportid_WORD word2
+ uint32_t word3_rsvd;
+ uint32_t word4;
+#define lpfc_mbx_read_vpi_acq_alpa_SHIFT 0
+#define lpfc_mbx_read_vpi_acq_alpa_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_acq_alpa_WORD word4
+#define lpfc_mbx_read_vpi_pb_SHIFT 15
+#define lpfc_mbx_read_vpi_pb_MASK 0x00000001
+#define lpfc_mbx_read_vpi_pb_WORD word4
+#define lpfc_mbx_read_vpi_spec_alpa_SHIFT 16
+#define lpfc_mbx_read_vpi_spec_alpa_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_spec_alpa_WORD word4
+#define lpfc_mbx_read_vpi_ns_SHIFT 30
+#define lpfc_mbx_read_vpi_ns_MASK 0x00000001
+#define lpfc_mbx_read_vpi_ns_WORD word4
+#define lpfc_mbx_read_vpi_hl_SHIFT 31
+#define lpfc_mbx_read_vpi_hl_MASK 0x00000001
+#define lpfc_mbx_read_vpi_hl_WORD word4
+ uint32_t word5_rsvd;
+ uint32_t word6;
+#define lpfc_mbx_read_vpi_vpi_SHIFT 0
+#define lpfc_mbx_read_vpi_vpi_MASK 0x0000FFFF
+#define lpfc_mbx_read_vpi_vpi_WORD word6
+ uint32_t word7;
+#define lpfc_mbx_read_vpi_mac_0_SHIFT 0
+#define lpfc_mbx_read_vpi_mac_0_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_0_WORD word7
+#define lpfc_mbx_read_vpi_mac_1_SHIFT 8
+#define lpfc_mbx_read_vpi_mac_1_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_1_WORD word7
+#define lpfc_mbx_read_vpi_mac_2_SHIFT 16
+#define lpfc_mbx_read_vpi_mac_2_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_2_WORD word7
+#define lpfc_mbx_read_vpi_mac_3_SHIFT 24
+#define lpfc_mbx_read_vpi_mac_3_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_3_WORD word7
+ uint32_t word8;
+#define lpfc_mbx_read_vpi_mac_4_SHIFT 0
+#define lpfc_mbx_read_vpi_mac_4_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_4_WORD word8
+#define lpfc_mbx_read_vpi_mac_5_SHIFT 8
+#define lpfc_mbx_read_vpi_mac_5_MASK 0x000000FF
+#define lpfc_mbx_read_vpi_mac_5_WORD word8
+#define lpfc_mbx_read_vpi_vlan_tag_SHIFT 16
+#define lpfc_mbx_read_vpi_vlan_tag_MASK 0x00000FFF
+#define lpfc_mbx_read_vpi_vlan_tag_WORD word8
+#define lpfc_mbx_read_vpi_vv_SHIFT 28
+#define lpfc_mbx_read_vpi_vv_MASK 0x0000001
+#define lpfc_mbx_read_vpi_vv_WORD word8
+};
+
+struct lpfc_mbx_unreg_vfi {
+ uint32_t word1_rsvd;
+ uint32_t word2;
+#define lpfc_unreg_vfi_vfi_SHIFT 0
+#define lpfc_unreg_vfi_vfi_MASK 0x0000FFFF
+#define lpfc_unreg_vfi_vfi_WORD word2
+};
+
+struct lpfc_mbx_resume_rpi {
+ uint32_t word1;
+#define lpfc_resume_rpi_rpi_SHIFT 0
+#define lpfc_resume_rpi_rpi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_rpi_WORD word1
+ uint32_t event_tag;
+ uint32_t word3_rsvd;
+ uint32_t word4_rsvd;
+ uint32_t word5_rsvd;
+ uint32_t word6;
+#define lpfc_resume_rpi_vpi_SHIFT 0
+#define lpfc_resume_rpi_vpi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_vpi_WORD word6
+#define lpfc_resume_rpi_vfi_SHIFT 16
+#define lpfc_resume_rpi_vfi_MASK 0x0000FFFF
+#define lpfc_resume_rpi_vfi_WORD word6
+};
+
+#define REG_FCF_INVALID_QID 0xFFFF
+struct lpfc_mbx_reg_fcfi {
+ uint32_t word1;
+#define lpfc_reg_fcfi_info_index_SHIFT 0
+#define lpfc_reg_fcfi_info_index_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_info_index_WORD word1
+#define lpfc_reg_fcfi_fcfi_SHIFT 16
+#define lpfc_reg_fcfi_fcfi_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_fcfi_WORD word1
+ uint32_t word2;
+#define lpfc_reg_fcfi_rq_id1_SHIFT 0
+#define lpfc_reg_fcfi_rq_id1_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id1_WORD word2
+#define lpfc_reg_fcfi_rq_id0_SHIFT 16
+#define lpfc_reg_fcfi_rq_id0_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id0_WORD word2
+ uint32_t word3;
+#define lpfc_reg_fcfi_rq_id3_SHIFT 0
+#define lpfc_reg_fcfi_rq_id3_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id3_WORD word3
+#define lpfc_reg_fcfi_rq_id2_SHIFT 16
+#define lpfc_reg_fcfi_rq_id2_MASK 0x0000FFFF
+#define lpfc_reg_fcfi_rq_id2_WORD word3
+ uint32_t word4;
+#define lpfc_reg_fcfi_type_match0_SHIFT 24
+#define lpfc_reg_fcfi_type_match0_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match0_WORD word4
+#define lpfc_reg_fcfi_type_mask0_SHIFT 16
+#define lpfc_reg_fcfi_type_mask0_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask0_WORD word4
+#define lpfc_reg_fcfi_rctl_match0_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match0_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match0_WORD word4
+#define lpfc_reg_fcfi_rctl_mask0_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask0_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask0_WORD word4
+ uint32_t word5;
+#define lpfc_reg_fcfi_type_match1_SHIFT 24
+#define lpfc_reg_fcfi_type_match1_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match1_WORD word5
+#define lpfc_reg_fcfi_type_mask1_SHIFT 16
+#define lpfc_reg_fcfi_type_mask1_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask1_WORD word5
+#define lpfc_reg_fcfi_rctl_match1_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match1_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match1_WORD word5
+#define lpfc_reg_fcfi_rctl_mask1_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask1_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask1_WORD word5
+ uint32_t word6;
+#define lpfc_reg_fcfi_type_match2_SHIFT 24
+#define lpfc_reg_fcfi_type_match2_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match2_WORD word6
+#define lpfc_reg_fcfi_type_mask2_SHIFT 16
+#define lpfc_reg_fcfi_type_mask2_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask2_WORD word6
+#define lpfc_reg_fcfi_rctl_match2_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match2_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match2_WORD word6
+#define lpfc_reg_fcfi_rctl_mask2_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask2_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask2_WORD word6
+ uint32_t word7;
+#define lpfc_reg_fcfi_type_match3_SHIFT 24
+#define lpfc_reg_fcfi_type_match3_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_match3_WORD word7
+#define lpfc_reg_fcfi_type_mask3_SHIFT 16
+#define lpfc_reg_fcfi_type_mask3_MASK 0x000000FF
+#define lpfc_reg_fcfi_type_mask3_WORD word7
+#define lpfc_reg_fcfi_rctl_match3_SHIFT 8
+#define lpfc_reg_fcfi_rctl_match3_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_match3_WORD word7
+#define lpfc_reg_fcfi_rctl_mask3_SHIFT 0
+#define lpfc_reg_fcfi_rctl_mask3_MASK 0x000000FF
+#define lpfc_reg_fcfi_rctl_mask3_WORD word7
+ uint32_t word8;
+#define lpfc_reg_fcfi_mam_SHIFT 13
+#define lpfc_reg_fcfi_mam_MASK 0x00000003
+#define lpfc_reg_fcfi_mam_WORD word8
+#define LPFC_MAM_BOTH 0 /* Both SPMA and FPMA */
+#define LPFC_MAM_SPMA 1 /* Server Provided MAC Address */
+#define LPFC_MAM_FPMA 2 /* Fabric Provided MAC Address */
+#define lpfc_reg_fcfi_vv_SHIFT 12
+#define lpfc_reg_fcfi_vv_MASK 0x00000001
+#define lpfc_reg_fcfi_vv_WORD word8
+#define lpfc_reg_fcfi_vlan_tag_SHIFT 0
+#define lpfc_reg_fcfi_vlan_tag_MASK 0x00000FFF
+#define lpfc_reg_fcfi_vlan_tag_WORD word8
+};
+
+struct lpfc_mbx_unreg_fcfi {
+ uint32_t word1_rsv;
+ uint32_t word2;
+#define lpfc_unreg_fcfi_SHIFT 0
+#define lpfc_unreg_fcfi_MASK 0x0000FFFF
+#define lpfc_unreg_fcfi_WORD word2
+};
+
+struct lpfc_mbx_read_rev {
+ uint32_t word1;
+#define lpfc_mbx_rd_rev_sli_lvl_SHIFT 16
+#define lpfc_mbx_rd_rev_sli_lvl_MASK 0x0000000F
+#define lpfc_mbx_rd_rev_sli_lvl_WORD word1
+#define lpfc_mbx_rd_rev_fcoe_SHIFT 20
+#define lpfc_mbx_rd_rev_fcoe_MASK 0x00000001
+#define lpfc_mbx_rd_rev_fcoe_WORD word1
+#define lpfc_mbx_rd_rev_vpd_SHIFT 29
+#define lpfc_mbx_rd_rev_vpd_MASK 0x00000001
+#define lpfc_mbx_rd_rev_vpd_WORD word1
+ uint32_t first_hw_rev;
+ uint32_t second_hw_rev;
+ uint32_t word4_rsvd;
+ uint32_t third_hw_rev;
+ uint32_t word6;
+#define lpfc_mbx_rd_rev_fcph_low_SHIFT 0
+#define lpfc_mbx_rd_rev_fcph_low_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_fcph_low_WORD word6
+#define lpfc_mbx_rd_rev_fcph_high_SHIFT 8
+#define lpfc_mbx_rd_rev_fcph_high_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_fcph_high_WORD word6
+#define lpfc_mbx_rd_rev_ftr_lvl_low_SHIFT 16
+#define lpfc_mbx_rd_rev_ftr_lvl_low_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_low_WORD word6
+#define lpfc_mbx_rd_rev_ftr_lvl_high_SHIFT 24
+#define lpfc_mbx_rd_rev_ftr_lvl_high_MASK 0x000000FF
+#define lpfc_mbx_rd_rev_ftr_lvl_high_WORD word6
+ uint32_t word7_rsvd;
+ uint32_t fw_id_rev;
+ uint8_t fw_name[16];
+ uint32_t ulp_fw_id_rev;
+ uint8_t ulp_fw_name[16];
+ uint32_t word18_47_rsvd[30];
+ uint32_t word48;
+#define lpfc_mbx_rd_rev_avail_len_SHIFT 0
+#define lpfc_mbx_rd_rev_avail_len_MASK 0x00FFFFFF
+#define lpfc_mbx_rd_rev_avail_len_WORD word48
+ uint32_t vpd_paddr_low;
+ uint32_t vpd_paddr_high;
+ uint32_t avail_vpd_len;
+ uint32_t rsvd_52_63[12];
+};
+
+struct lpfc_mbx_read_config {
+ uint32_t word1;
+#define lpfc_mbx_rd_conf_max_bbc_SHIFT 0
+#define lpfc_mbx_rd_conf_max_bbc_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_max_bbc_WORD word1
+#define lpfc_mbx_rd_conf_init_bbc_SHIFT 8
+#define lpfc_mbx_rd_conf_init_bbc_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_init_bbc_WORD word1
+ uint32_t word2;
+#define lpfc_mbx_rd_conf_nport_did_SHIFT 0
+#define lpfc_mbx_rd_conf_nport_did_MASK 0x00FFFFFF
+#define lpfc_mbx_rd_conf_nport_did_WORD word2
+#define lpfc_mbx_rd_conf_topology_SHIFT 24
+#define lpfc_mbx_rd_conf_topology_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_topology_WORD word2
+ uint32_t word3;
+#define lpfc_mbx_rd_conf_ao_SHIFT 0
+#define lpfc_mbx_rd_conf_ao_MASK 0x00000001
+#define lpfc_mbx_rd_conf_ao_WORD word3
+#define lpfc_mbx_rd_conf_bb_scn_SHIFT 8
+#define lpfc_mbx_rd_conf_bb_scn_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_bb_scn_WORD word3
+#define lpfc_mbx_rd_conf_cbb_scn_SHIFT 12
+#define lpfc_mbx_rd_conf_cbb_scn_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_cbb_scn_WORD word3
+#define lpfc_mbx_rd_conf_mc_SHIFT 29
+#define lpfc_mbx_rd_conf_mc_MASK 0x00000001
+#define lpfc_mbx_rd_conf_mc_WORD word3
+ uint32_t word4;
+#define lpfc_mbx_rd_conf_e_d_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_e_d_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_e_d_tov_WORD word4
+ uint32_t word5;
+#define lpfc_mbx_rd_conf_lp_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_lp_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_lp_tov_WORD word5
+ uint32_t word6;
+#define lpfc_mbx_rd_conf_r_a_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_r_a_tov_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_r_a_tov_WORD word6
+ uint32_t word7;
+#define lpfc_mbx_rd_conf_r_t_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_r_t_tov_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_r_t_tov_WORD word7
+ uint32_t word8;
+#define lpfc_mbx_rd_conf_al_tov_SHIFT 0
+#define lpfc_mbx_rd_conf_al_tov_MASK 0x0000000F
+#define lpfc_mbx_rd_conf_al_tov_WORD word8
+ uint32_t word9;
+#define lpfc_mbx_rd_conf_lmt_SHIFT 0
+#define lpfc_mbx_rd_conf_lmt_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_lmt_WORD word9
+ uint32_t word10;
+#define lpfc_mbx_rd_conf_max_alpa_SHIFT 0
+#define lpfc_mbx_rd_conf_max_alpa_MASK 0x000000FF
+#define lpfc_mbx_rd_conf_max_alpa_WORD word10
+ uint32_t word11_rsvd;
+ uint32_t word12;
+#define lpfc_mbx_rd_conf_xri_base_SHIFT 0
+#define lpfc_mbx_rd_conf_xri_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_base_WORD word12
+#define lpfc_mbx_rd_conf_xri_count_SHIFT 16
+#define lpfc_mbx_rd_conf_xri_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_xri_count_WORD word12
+ uint32_t word13;
+#define lpfc_mbx_rd_conf_rpi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_rpi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_base_WORD word13
+#define lpfc_mbx_rd_conf_rpi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_rpi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rpi_count_WORD word13
+ uint32_t word14;
+#define lpfc_mbx_rd_conf_vpi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_vpi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_base_WORD word14
+#define lpfc_mbx_rd_conf_vpi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_vpi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vpi_count_WORD word14
+ uint32_t word15;
+#define lpfc_mbx_rd_conf_vfi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_vfi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_base_WORD word15
+#define lpfc_mbx_rd_conf_vfi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_vfi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_vfi_count_WORD word15
+ uint32_t word16;
+#define lpfc_mbx_rd_conf_fcfi_base_SHIFT 0
+#define lpfc_mbx_rd_conf_fcfi_base_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_base_WORD word16
+#define lpfc_mbx_rd_conf_fcfi_count_SHIFT 16
+#define lpfc_mbx_rd_conf_fcfi_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_fcfi_count_WORD word16
+ uint32_t word17;
+#define lpfc_mbx_rd_conf_rq_count_SHIFT 0
+#define lpfc_mbx_rd_conf_rq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_rq_count_WORD word17
+#define lpfc_mbx_rd_conf_eq_count_SHIFT 16
+#define lpfc_mbx_rd_conf_eq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_eq_count_WORD word17
+ uint32_t word18;
+#define lpfc_mbx_rd_conf_wq_count_SHIFT 0
+#define lpfc_mbx_rd_conf_wq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_wq_count_WORD word18
+#define lpfc_mbx_rd_conf_cq_count_SHIFT 16
+#define lpfc_mbx_rd_conf_cq_count_MASK 0x0000FFFF
+#define lpfc_mbx_rd_conf_cq_count_WORD word18
+};
+
+struct lpfc_mbx_request_features {
+ uint32_t word1;
+#define lpfc_mbx_rq_ftr_qry_SHIFT 0
+#define lpfc_mbx_rq_ftr_qry_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_qry_WORD word1
+ uint32_t word2;
+#define lpfc_mbx_rq_ftr_rq_iaab_SHIFT 0
+#define lpfc_mbx_rq_ftr_rq_iaab_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_iaab_WORD word2
+#define lpfc_mbx_rq_ftr_rq_npiv_SHIFT 1
+#define lpfc_mbx_rq_ftr_rq_npiv_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_npiv_WORD word2
+#define lpfc_mbx_rq_ftr_rq_dif_SHIFT 2
+#define lpfc_mbx_rq_ftr_rq_dif_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_dif_WORD word2
+#define lpfc_mbx_rq_ftr_rq_vf_SHIFT 3
+#define lpfc_mbx_rq_ftr_rq_vf_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_vf_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpi_SHIFT 4
+#define lpfc_mbx_rq_ftr_rq_fcpi_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpi_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpt_SHIFT 5
+#define lpfc_mbx_rq_ftr_rq_fcpt_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpt_WORD word2
+#define lpfc_mbx_rq_ftr_rq_fcpc_SHIFT 6
+#define lpfc_mbx_rq_ftr_rq_fcpc_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_fcpc_WORD word2
+#define lpfc_mbx_rq_ftr_rq_ifip_SHIFT 7
+#define lpfc_mbx_rq_ftr_rq_ifip_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rq_ifip_WORD word2
+ uint32_t word3;
+#define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT 0
+#define lpfc_mbx_rq_ftr_rsp_iaab_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_iaab_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_npiv_SHIFT 1
+#define lpfc_mbx_rq_ftr_rsp_npiv_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_npiv_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_dif_SHIFT 2
+#define lpfc_mbx_rq_ftr_rsp_dif_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_dif_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_vf_SHIFT 3
+#define lpfc_mbx_rq_ftr_rsp_vf__MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_vf_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpi_SHIFT 4
+#define lpfc_mbx_rq_ftr_rsp_fcpi_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpi_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpt_SHIFT 5
+#define lpfc_mbx_rq_ftr_rsp_fcpt_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpt_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_fcpc_SHIFT 6
+#define lpfc_mbx_rq_ftr_rsp_fcpc_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_fcpc_WORD word3
+#define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT 7
+#define lpfc_mbx_rq_ftr_rsp_ifip_MASK 0x00000001
+#define lpfc_mbx_rq_ftr_rsp_ifip_WORD word3
+};
+
+/* Mailbox Completion Queue Error Messages */
+#define MB_CQE_STATUS_SUCCESS 0x0
+#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1
+#define MB_CQE_STATUS_INVALID_PARAMETER 0x2
+#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES 0x3
+#define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4
+#define MB_CQE_STATUS_DMA_FAILED 0x5
+
+/* mailbox queue entry structure */
+struct lpfc_mqe {
+ uint32_t word0;
+#define lpfc_mqe_status_SHIFT 16
+#define lpfc_mqe_status_MASK 0x0000FFFF
+#define lpfc_mqe_status_WORD word0
+#define lpfc_mqe_command_SHIFT 8
+#define lpfc_mqe_command_MASK 0x000000FF
+#define lpfc_mqe_command_WORD word0
+ union {
+ uint32_t mb_words[LPFC_SLI4_MB_WORD_COUNT - 1];
+ /* sli4 mailbox commands */
+ struct lpfc_mbx_sli4_config sli4_config;
+ struct lpfc_mbx_init_vfi init_vfi;
+ struct lpfc_mbx_reg_vfi reg_vfi;
+ struct lpfc_mbx_reg_vfi unreg_vfi;
+ struct lpfc_mbx_init_vpi init_vpi;
+ struct lpfc_mbx_resume_rpi resume_rpi;
+ struct lpfc_mbx_read_fcf_tbl read_fcf_tbl;
+ struct lpfc_mbx_add_fcf_tbl_entry add_fcf_entry;
+ struct lpfc_mbx_del_fcf_tbl_entry del_fcf_entry;
+ struct lpfc_mbx_reg_fcfi reg_fcfi;
+ struct lpfc_mbx_unreg_fcfi unreg_fcfi;
+ struct lpfc_mbx_mq_create mq_create;
+ struct lpfc_mbx_eq_create eq_create;
+ struct lpfc_mbx_cq_create cq_create;
+ struct lpfc_mbx_wq_create wq_create;
+ struct lpfc_mbx_rq_create rq_create;
+ struct lpfc_mbx_mq_destroy mq_destroy;
+ struct lpfc_mbx_eq_destroy eq_destroy;
+ struct lpfc_mbx_cq_destroy cq_destroy;
+ struct lpfc_mbx_wq_destroy wq_destroy;
+ struct lpfc_mbx_rq_destroy rq_destroy;
+ struct lpfc_mbx_post_sgl_pages post_sgl_pages;
+ struct lpfc_mbx_nembed_cmd nembed_cmd;
+ struct lpfc_mbx_read_rev read_rev;
+ struct lpfc_mbx_read_vpi read_vpi;
+ struct lpfc_mbx_read_config rd_config;
+ struct lpfc_mbx_request_features req_ftrs;
+ struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
+ struct lpfc_mbx_nop nop;
+ } un;
+};
+
+struct lpfc_mcqe {
+ uint32_t word0;
+#define lpfc_mcqe_status_SHIFT 0
+#define lpfc_mcqe_status_MASK 0x0000FFFF
+#define lpfc_mcqe_status_WORD word0
+#define lpfc_mcqe_ext_status_SHIFT 16
+#define lpfc_mcqe_ext_status_MASK 0x0000FFFF
+#define lpfc_mcqe_ext_status_WORD word0
+ uint32_t mcqe_tag0;
+ uint32_t mcqe_tag1;
+ uint32_t trailer;
+#define lpfc_trailer_valid_SHIFT 31
+#define lpfc_trailer_valid_MASK 0x00000001
+#define lpfc_trailer_valid_WORD trailer
+#define lpfc_trailer_async_SHIFT 30
+#define lpfc_trailer_async_MASK 0x00000001
+#define lpfc_trailer_async_WORD trailer
+#define lpfc_trailer_hpi_SHIFT 29
+#define lpfc_trailer_hpi_MASK 0x00000001
+#define lpfc_trailer_hpi_WORD trailer
+#define lpfc_trailer_completed_SHIFT 28
+#define lpfc_trailer_completed_MASK 0x00000001
+#define lpfc_trailer_completed_WORD trailer
+#define lpfc_trailer_consumed_SHIFT 27
+#define lpfc_trailer_consumed_MASK 0x00000001
+#define lpfc_trailer_consumed_WORD trailer
+#define lpfc_trailer_type_SHIFT 16
+#define lpfc_trailer_type_MASK 0x000000FF
+#define lpfc_trailer_type_WORD trailer
+#define lpfc_trailer_code_SHIFT 8
+#define lpfc_trailer_code_MASK 0x000000FF
+#define lpfc_trailer_code_WORD trailer
+#define LPFC_TRAILER_CODE_LINK 0x1
+#define LPFC_TRAILER_CODE_FCOE 0x2
+#define LPFC_TRAILER_CODE_DCBX 0x3
+};
+
+struct lpfc_acqe_link {
+ uint32_t word0;
+#define lpfc_acqe_link_speed_SHIFT 24
+#define lpfc_acqe_link_speed_MASK 0x000000FF
+#define lpfc_acqe_link_speed_WORD word0
+#define LPFC_ASYNC_LINK_SPEED_ZERO 0x0
+#define LPFC_ASYNC_LINK_SPEED_10MBPS 0x1
+#define LPFC_ASYNC_LINK_SPEED_100MBPS 0x2
+#define LPFC_ASYNC_LINK_SPEED_1GBPS 0x3
+#define LPFC_ASYNC_LINK_SPEED_10GBPS 0x4
+#define lpfc_acqe_link_duplex_SHIFT 16
+#define lpfc_acqe_link_duplex_MASK 0x000000FF
+#define lpfc_acqe_link_duplex_WORD word0
+#define LPFC_ASYNC_LINK_DUPLEX_NONE 0x0
+#define LPFC_ASYNC_LINK_DUPLEX_HALF 0x1
+#define LPFC_ASYNC_LINK_DUPLEX_FULL 0x2
+#define lpfc_acqe_link_status_SHIFT 8
+#define lpfc_acqe_link_status_MASK 0x000000FF
+#define lpfc_acqe_link_status_WORD word0
+#define LPFC_ASYNC_LINK_STATUS_DOWN 0x0
+#define LPFC_ASYNC_LINK_STATUS_UP 0x1
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN 0x2
+#define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP 0x3
+#define lpfc_acqe_link_physical_SHIFT 0
+#define lpfc_acqe_link_physical_MASK 0x000000FF
+#define lpfc_acqe_link_physical_WORD word0
+#define LPFC_ASYNC_LINK_PORT_A 0x0
+#define LPFC_ASYNC_LINK_PORT_B 0x1
+ uint32_t word1;
+#define lpfc_acqe_link_fault_SHIFT 0
+#define lpfc_acqe_link_fault_MASK 0x000000FF
+#define lpfc_acqe_link_fault_WORD word1
+#define LPFC_ASYNC_LINK_FAULT_NONE 0x0
+#define LPFC_ASYNC_LINK_FAULT_LOCAL 0x1
+#define LPFC_ASYNC_LINK_FAULT_REMOTE 0x2
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+struct lpfc_acqe_fcoe {
+ uint32_t fcf_index;
+ uint32_t word1;
+#define lpfc_acqe_fcoe_fcf_count_SHIFT 0
+#define lpfc_acqe_fcoe_fcf_count_MASK 0x0000FFFF
+#define lpfc_acqe_fcoe_fcf_count_WORD word1
+#define lpfc_acqe_fcoe_event_type_SHIFT 16
+#define lpfc_acqe_fcoe_event_type_MASK 0x0000FFFF
+#define lpfc_acqe_fcoe_event_type_WORD word1
+#define LPFC_FCOE_EVENT_TYPE_NEW_FCF 0x1
+#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL 0x2
+#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD 0x3
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+struct lpfc_acqe_dcbx {
+ uint32_t tlv_ttl;
+ uint32_t reserved;
+ uint32_t event_tag;
+ uint32_t trailer;
+};
+
+/*
+ * Define the bootstrap mailbox (bmbx) region used to communicate
+ * mailbox command between the host and port. The mailbox consists
+ * of a payload area of 256 bytes and a completion queue of length
+ * 16 bytes.
+ */
+struct lpfc_bmbx_create {
+ struct lpfc_mqe mqe;
+ struct lpfc_mcqe mcqe;
+};
+
+#define SGL_ALIGN_SZ 64
+#define SGL_PAGE_SIZE 4096
+/* align SGL addr on a size boundary - adjust address up */
+#define NO_XRI ((uint16_t)-1)
+struct wqe_common {
+ uint32_t word6;
+#define wqe_xri_SHIFT 0
+#define wqe_xri_MASK 0x0000FFFF
+#define wqe_xri_WORD word6
+#define wqe_ctxt_tag_SHIFT 16
+#define wqe_ctxt_tag_MASK 0x0000FFFF
+#define wqe_ctxt_tag_WORD word6
+ uint32_t word7;
+#define wqe_ct_SHIFT 2
+#define wqe_ct_MASK 0x00000003
+#define wqe_ct_WORD word7
+#define wqe_status_SHIFT 4
+#define wqe_status_MASK 0x0000000f
+#define wqe_status_WORD word7
+#define wqe_cmnd_SHIFT 8
+#define wqe_cmnd_MASK 0x000000ff
+#define wqe_cmnd_WORD word7
+#define wqe_class_SHIFT 16
+#define wqe_class_MASK 0x00000007
+#define wqe_class_WORD word7
+#define wqe_pu_SHIFT 20
+#define wqe_pu_MASK 0x00000003
+#define wqe_pu_WORD word7
+#define wqe_erp_SHIFT 22
+#define wqe_erp_MASK 0x00000001
+#define wqe_erp_WORD word7
+#define wqe_lnk_SHIFT 23
+#define wqe_lnk_MASK 0x00000001
+#define wqe_lnk_WORD word7
+#define wqe_tmo_SHIFT 24
+#define wqe_tmo_MASK 0x000000ff
+#define wqe_tmo_WORD word7
+ uint32_t abort_tag; /* word 8 in WQE */
+ uint32_t word9;
+#define wqe_reqtag_SHIFT 0
+#define wqe_reqtag_MASK 0x0000FFFF
+#define wqe_reqtag_WORD word9
+#define wqe_rcvoxid_SHIFT 16
+#define wqe_rcvoxid_MASK 0x0000FFFF
+#define wqe_rcvoxid_WORD word9
+ uint32_t word10;
+#define wqe_pri_SHIFT 16
+#define wqe_pri_MASK 0x00000007
+#define wqe_pri_WORD word10
+#define wqe_pv_SHIFT 19
+#define wqe_pv_MASK 0x00000001
+#define wqe_pv_WORD word10
+#define wqe_xc_SHIFT 21
+#define wqe_xc_MASK 0x00000001
+#define wqe_xc_WORD word10
+#define wqe_ccpe_SHIFT 23
+#define wqe_ccpe_MASK 0x00000001
+#define wqe_ccpe_WORD word10
+#define wqe_ccp_SHIFT 24
+#define wqe_ccp_MASK 0x000000ff
+#define wqe_ccp_WORD word10
+ uint32_t word11;
+#define wqe_cmd_type_SHIFT 0
+#define wqe_cmd_type_MASK 0x0000000f
+#define wqe_cmd_type_WORD word11
+#define wqe_wqec_SHIFT 7
+#define wqe_wqec_MASK 0x00000001
+#define wqe_wqec_WORD word11
+#define wqe_cqid_SHIFT 16
+#define wqe_cqid_MASK 0x000003ff
+#define wqe_cqid_WORD word11
+};
+
+struct wqe_did {
+ uint32_t word5;
+#define wqe_els_did_SHIFT 0
+#define wqe_els_did_MASK 0x00FFFFFF
+#define wqe_els_did_WORD word5
+#define wqe_xmit_bls_ar_SHIFT 30
+#define wqe_xmit_bls_ar_MASK 0x00000001
+#define wqe_xmit_bls_ar_WORD word5
+#define wqe_xmit_bls_xo_SHIFT 31
+#define wqe_xmit_bls_xo_MASK 0x00000001
+#define wqe_xmit_bls_xo_WORD word5
+};
+
+struct els_request64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len;
+ uint32_t word4;
+#define els_req64_sid_SHIFT 0
+#define els_req64_sid_MASK 0x00FFFFFF
+#define els_req64_sid_WORD word4
+#define els_req64_sp_SHIFT 24
+#define els_req64_sp_MASK 0x00000001
+#define els_req64_sp_WORD word4
+#define els_req64_vf_SHIFT 25
+#define els_req64_vf_MASK 0x00000001
+#define els_req64_vf_WORD word4
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t word12;
+#define els_req64_vfid_SHIFT 1
+#define els_req64_vfid_MASK 0x00000FFF
+#define els_req64_vfid_WORD word12
+#define els_req64_pri_SHIFT 13
+#define els_req64_pri_MASK 0x00000007
+#define els_req64_pri_WORD word12
+ uint32_t word13;
+#define els_req64_hopcnt_SHIFT 24
+#define els_req64_hopcnt_MASK 0x000000ff
+#define els_req64_hopcnt_WORD word13
+ uint32_t reserved[2];
+};
+
+struct xmit_els_rsp64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t rsvd3;
+ uint32_t rsvd4;
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct xmit_bls_rsp64_wqe {
+ uint32_t payload0;
+ uint32_t word1;
+#define xmit_bls_rsp64_rxid_SHIFT 0
+#define xmit_bls_rsp64_rxid_MASK 0x0000ffff
+#define xmit_bls_rsp64_rxid_WORD word1
+#define xmit_bls_rsp64_oxid_SHIFT 16
+#define xmit_bls_rsp64_oxid_MASK 0x0000ffff
+#define xmit_bls_rsp64_oxid_WORD word1
+ uint32_t word2;
+#define xmit_bls_rsp64_seqcntlo_SHIFT 0
+#define xmit_bls_rsp64_seqcntlo_MASK 0x0000ffff
+#define xmit_bls_rsp64_seqcntlo_WORD word2
+#define xmit_bls_rsp64_seqcnthi_SHIFT 16
+#define xmit_bls_rsp64_seqcnthi_MASK 0x0000ffff
+#define xmit_bls_rsp64_seqcnthi_WORD word2
+ uint32_t rsrvd3;
+ uint32_t rsrvd4;
+ struct wqe_did wqe_dest;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+struct wqe_rctl_dfctl {
+ uint32_t word5;
+#define wqe_si_SHIFT 2
+#define wqe_si_MASK 0x000000001
+#define wqe_si_WORD word5
+#define wqe_la_SHIFT 3
+#define wqe_la_MASK 0x000000001
+#define wqe_la_WORD word5
+#define wqe_ls_SHIFT 7
+#define wqe_ls_MASK 0x000000001
+#define wqe_ls_WORD word5
+#define wqe_dfctl_SHIFT 8
+#define wqe_dfctl_MASK 0x0000000ff
+#define wqe_dfctl_WORD word5
+#define wqe_type_SHIFT 16
+#define wqe_type_MASK 0x0000000ff
+#define wqe_type_WORD word5
+#define wqe_rctl_SHIFT 24
+#define wqe_rctl_MASK 0x0000000ff
+#define wqe_rctl_WORD word5
+};
+
+struct xmit_seq64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t paylaod_offset;
+ uint32_t relative_offset;
+ struct wqe_rctl_dfctl wge_ctl;
+ struct wqe_common wqe_com; /* words 6-11 */
+ /* Note: word10 different REVISIT */
+ uint32_t xmit_len;
+ uint32_t rsvd_12_15[3];
+};
+struct xmit_bcast64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t paylaod_len;
+ uint32_t rsvd4;
+ struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct gen_req64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t command_len;
+ uint32_t payload_len;
+ struct wqe_rctl_dfctl wge_ctl; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4];
+};
+
+struct create_xri_wqe {
+ uint32_t rsrvd[5]; /* words 0-4 */
+ struct wqe_did wqe_dest; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+#define T_REQUEST_TAG 3
+#define T_XRI_TAG 1
+
+struct abort_cmd_wqe {
+ uint32_t rsrvd[3];
+ uint32_t word3;
+#define abort_cmd_ia_SHIFT 0
+#define abort_cmd_ia_MASK 0x000000001
+#define abort_cmd_ia_WORD word3
+#define abort_cmd_criteria_SHIFT 8
+#define abort_cmd_criteria_MASK 0x0000000ff
+#define abort_cmd_criteria_WORD word3
+ uint32_t rsrvd4;
+ uint32_t rsrvd5;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_iwrite64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len;
+ uint32_t total_xfer_len;
+ uint32_t initial_xfer_len;
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_iread64_wqe {
+ struct ulp_bde64 bde;
+ uint32_t payload_len; /* word 3 */
+ uint32_t total_xfer_len; /* word 4 */
+ uint32_t rsrvd5; /* word 5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+struct fcp_icmnd64_wqe {
+ struct ulp_bde64 bde; /* words 0-2 */
+ uint32_t rsrvd[3]; /* words 3-5 */
+ struct wqe_common wqe_com; /* words 6-11 */
+ uint32_t rsvd_12_15[4]; /* word 12-15 */
+};
+
+
+union lpfc_wqe {
+ uint32_t words[16];
+ struct lpfc_wqe_generic generic;
+ struct fcp_icmnd64_wqe fcp_icmd;
+ struct fcp_iread64_wqe fcp_iread;
+ struct fcp_iwrite64_wqe fcp_iwrite;
+ struct abort_cmd_wqe abort_cmd;
+ struct create_xri_wqe create_xri;
+ struct xmit_bcast64_wqe xmit_bcast64;
+ struct xmit_seq64_wqe xmit_sequence;
+ struct xmit_bls_rsp64_wqe xmit_bls_rsp;
+ struct xmit_els_rsp64_wqe xmit_els_rsp;
+ struct els_request64_wqe els_req;
+ struct gen_req64_wqe gen_req;
+};
+
+#define FCP_COMMAND 0x0
+#define FCP_COMMAND_DATA_OUT 0x1
+#define ELS_COMMAND_NON_FIP 0xC
+#define ELS_COMMAND_FIP 0xD
+#define OTHER_COMMAND 0x8
+
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 86d1bdc..2f5907f 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -34,8 +34,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -51,9 +53,23 @@
unsigned long _dump_buf_dif_order;
spinlock_t _dump_buf_lock;
-static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *, int);
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
+static int lpfc_sli4_queue_create(struct lpfc_hba *);
+static void lpfc_sli4_queue_destroy(struct lpfc_hba *);
+static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
+static int lpfc_setup_endian_order(struct lpfc_hba *);
+static int lpfc_sli4_read_config(struct lpfc_hba *);
+static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
+static void lpfc_free_sgl_list(struct lpfc_hba *);
+static int lpfc_init_sgl_list(struct lpfc_hba *);
+static int lpfc_init_active_sgl_array(struct lpfc_hba *);
+static void lpfc_free_active_sgl(struct lpfc_hba *);
+static int lpfc_hba_down_post_s3(struct lpfc_hba *phba);
+static int lpfc_hba_down_post_s4(struct lpfc_hba *phba);
+static int lpfc_sli4_cq_event_pool_create(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *);
+static void lpfc_sli4_cq_event_release_all(struct lpfc_hba *);
static struct scsi_transport_template *lpfc_transport_template = NULL;
static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
@@ -92,7 +108,7 @@
return -ENOMEM;
}
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
phba->link_state = LPFC_INIT_MBX_CMDS;
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
@@ -205,6 +221,11 @@
mb->mbxCommand, mb->mbxStatus);
mb->un.varDmp.word_cnt = 0;
}
+ /* dump mem may return a zero when finished or we got a
+ * mailbox error, either way we are done.
+ */
+ if (mb->un.varDmp.word_cnt == 0)
+ break;
if (mb->un.varDmp.word_cnt > DMP_VPD_SIZE - offset)
mb->un.varDmp.word_cnt = DMP_VPD_SIZE - offset;
lpfc_sli_pcimem_bcopy(((uint8_t *)mb) + DMP_RSP_OFFSET,
@@ -233,7 +254,7 @@
static void
lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
{
- if (pmboxq->mb.mbxStatus == MBX_SUCCESS)
+ if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS)
phba->temp_sensor_support = 1;
else
phba->temp_sensor_support = 0;
@@ -260,7 +281,7 @@
/* character array used for decoding dist type. */
char dist_char[] = "nabx";
- if (pmboxq->mb.mbxStatus != MBX_SUCCESS) {
+ if (pmboxq->u.mb.mbxStatus != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
@@ -268,7 +289,7 @@
prg = (struct prog_id *) &prog_id_word;
/* word 7 contain option rom version */
- prog_id_word = pmboxq->mb.un.varWords[7];
+ prog_id_word = pmboxq->u.mb.un.varWords[7];
/* Decode the Option rom version word to a readable string */
if (prg->dist < 4)
@@ -325,7 +346,7 @@
phba->link_state = LPFC_HBA_ERROR;
return -ENOMEM;
}
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
/* Get login parameters for NID. */
lpfc_read_sparam(phba, pmb, 0);
@@ -364,6 +385,7 @@
/* Update the fc_host data structures with new wwn. */
fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+ fc_host_max_npiv_vports(shost) = phba->max_vpi;
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
@@ -460,17 +482,18 @@
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
"0352 Config MSI mailbox command "
"failed, mbxCmd x%x, mbxStatus x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+ pmb->u.mb.mbxCommand,
+ pmb->u.mb.mbxStatus);
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
}
+ spin_lock_irq(&phba->hbalock);
/* Initialize ERATT handling flag */
phba->hba_flag &= ~HBA_ERATT_HANDLED;
/* Enable appropriate host interrupts */
- spin_lock_irq(&phba->hbalock);
status = readl(phba->HCregaddr);
status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
if (psli->num_rings > 0)
@@ -571,16 +594,20 @@
{
struct lpfc_vport **vports;
int i;
- /* Disable interrupts */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
+
+ if (phba->sli_rev <= LPFC_SLI_REV3) {
+ /* Disable interrupts */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ }
if (phba->pport->load_flag & FC_UNLOADING)
lpfc_cleanup_discovery_resources(phba->pport);
else {
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports &&
+ vports[i] != NULL; i++)
lpfc_cleanup_discovery_resources(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
}
@@ -588,7 +615,7 @@
}
/**
- * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
+ * lpfc_hba_down_post_s3 - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
@@ -598,8 +625,8 @@
* 0 - sucess.
* Any other value - error.
**/
-int
-lpfc_hba_down_post(struct lpfc_hba *phba)
+static int
+lpfc_hba_down_post_s3(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
@@ -642,6 +669,77 @@
return 0;
}
+/**
+ * lpfc_hba_down_post_s4 - Perform lpfc uninitialization after HBA reset
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine will do uninitialization after the HBA is reset when bring
+ * down the SLI Layer.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+static int
+lpfc_hba_down_post_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *psb, *psb_next;
+ LIST_HEAD(aborts);
+ int ret;
+ unsigned long iflag = 0;
+ ret = lpfc_hba_down_post_s3(phba);
+ if (ret)
+ return ret;
+ /* At this point in time the HBA is either reset or DOA. Either
+ * way, nothing should be on lpfc_abts_els_sgl_list, it needs to be
+ * on the lpfc_sgl_list so that it can either be freed if the
+ * driver is unloading or reposted if the driver is restarting
+ * the port.
+ */
+ spin_lock_irq(&phba->hbalock); /* required for lpfc_sgl_list and */
+ /* scsl_buf_list */
+ /* abts_sgl_list_lock required because worker thread uses this
+ * list.
+ */
+ spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+ list_splice_init(&phba->sli4_hba.lpfc_abts_els_sgl_list,
+ &phba->sli4_hba.lpfc_sgl_list);
+ spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+ /* abts_scsi_buf_list_lock required because worker thread uses this
+ * list.
+ */
+ spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ list_splice_init(&phba->sli4_hba.lpfc_abts_scsi_buf_list,
+ &aborts);
+ spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ spin_unlock_irq(&phba->hbalock);
+
+ list_for_each_entry_safe(psb, psb_next, &aborts, list) {
+ psb->pCmd = NULL;
+ psb->status = IOSTAT_SUCCESS;
+ }
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ list_splice(&aborts, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ return 0;
+}
+
+/**
+ * lpfc_hba_down_post - Wrapper func for hba down post routine
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 routine for performing
+ * uninitialization after the HBA is reset when bring down the SLI Layer.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+int
+lpfc_hba_down_post(struct lpfc_hba *phba)
+{
+ return (*phba->lpfc_hba_down_post)(phba);
+}
/**
* lpfc_hb_timeout - The HBA-timer timeout handler
@@ -809,7 +907,7 @@
"taking this port offline.\n");
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
lpfc_offline_prep(phba);
@@ -834,13 +932,15 @@
struct lpfc_sli *psli = &phba->sli;
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
lpfc_offline_prep(phba);
lpfc_offline(phba);
lpfc_reset_barrier(phba);
+ spin_lock_irq(&phba->hbalock);
lpfc_sli_brdreset(phba);
+ spin_unlock_irq(&phba->hbalock);
lpfc_hba_down_post(phba);
lpfc_sli_brdready(phba, HS_MBRDY);
lpfc_unblock_mgmt_io(phba);
@@ -849,6 +949,25 @@
}
/**
+ * lpfc_sli4_offline_eratt - Bring lpfc offline on SLI4 hardware error attention
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to bring a SLI4 HBA offline when HBA hardware error
+ * other than Port Error 6 has been detected.
+ **/
+static void
+lpfc_sli4_offline_eratt(struct lpfc_hba *phba)
+{
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_sli4_brdreset(phba);
+ lpfc_hba_down_post(phba);
+ lpfc_sli4_post_status_check(phba);
+ lpfc_unblock_mgmt_io(phba);
+ phba->link_state = LPFC_HBA_ERROR;
+}
+
+/**
* lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
* @phba: pointer to lpfc hba data structure.
*
@@ -864,6 +983,16 @@
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli = &phba->sli;
+ /* If the pci channel is offline, ignore possible errors,
+ * since we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0479 Deferred Adapter Hardware Error "
"Data: x%x x%x x%x\n",
@@ -871,7 +1000,7 @@
phba->work_status[0], phba->work_status[1]);
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
@@ -909,13 +1038,30 @@
if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
phba->work_hs = old_host_status & ~HS_FFER1;
+ spin_lock_irq(&phba->hbalock);
phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
}
+static void
+lpfc_board_errevt_to_mgmt(struct lpfc_hba *phba)
+{
+ struct lpfc_board_event_header board_event;
+ struct Scsi_Host *shost;
+
+ board_event.event_type = FC_REG_BOARD_EVENT;
+ board_event.subcategory = LPFC_EVENT_PORTINTERR;
+ shost = lpfc_shost_from_vport(phba->pport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(board_event),
+ (char *) &board_event,
+ LPFC_NL_VENDOR_ID);
+}
+
/**
- * lpfc_handle_eratt - The HBA hardware error handler
+ * lpfc_handle_eratt_s3 - The SLI3 HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
@@ -924,8 +1070,8 @@
* 2 - DMA ring index out of range
* 3 - Mailbox command came back as unknown
**/
-void
-lpfc_handle_eratt(struct lpfc_hba *phba)
+static void
+lpfc_handle_eratt_s3(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
struct lpfc_sli *psli = &phba->sli;
@@ -934,24 +1080,23 @@
unsigned long temperature;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
- struct lpfc_board_event_header board_event;
/* If the pci channel is offline, ignore possible errors,
- * since we cannot communicate with the pci card anyway. */
- if (pci_channel_offline(phba->pcidev))
+ * since we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
return;
+ }
+
/* If resets are disabled then leave the HBA alone and return */
if (!phba->cfg_enable_hba_reset)
return;
/* Send an internal error event to mgmt application */
- board_event.event_type = FC_REG_BOARD_EVENT;
- board_event.subcategory = LPFC_EVENT_PORTINTERR;
- shost = lpfc_shost_from_vport(phba->pport);
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(board_event),
- (char *) &board_event,
- LPFC_NL_VENDOR_ID);
+ lpfc_board_errevt_to_mgmt(phba);
if (phba->hba_flag & DEFER_ERATT)
lpfc_handle_deferred_eratt(phba);
@@ -965,7 +1110,7 @@
phba->work_status[0], phba->work_status[1]);
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/*
@@ -1037,6 +1182,65 @@
}
/**
+ * lpfc_handle_eratt_s4 - The SLI4 HBA hardware error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the SLI4 HBA hardware error attention
+ * conditions.
+ **/
+static void
+lpfc_handle_eratt_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ uint32_t event_data;
+ struct Scsi_Host *shost;
+
+ /* If the pci channel is offline, ignore possible errors, since
+ * we cannot communicate with the pci card anyway.
+ */
+ if (pci_channel_offline(phba->pcidev))
+ return;
+ /* If resets are disabled then leave the HBA alone and return */
+ if (!phba->cfg_enable_hba_reset)
+ return;
+
+ /* Send an internal error event to mgmt application */
+ lpfc_board_errevt_to_mgmt(phba);
+
+ /* For now, the actual action for SLI4 device handling is not
+ * specified yet, just treated it as adaptor hardware failure
+ */
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
+ phba->work_status[0], phba->work_status[1]);
+
+ event_data = FC_REG_DUMP_EVENT;
+ shost = lpfc_shost_from_vport(vport);
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(event_data), (char *) &event_data,
+ SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
+
+ lpfc_sli4_offline_eratt(phba);
+}
+
+/**
+ * lpfc_handle_eratt - Wrapper func for handling hba error attention
+ * @phba: pointer to lpfc HBA data structure.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba error attention handling
+ * routine from the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes
+ * 0 - sucess.
+ * Any other value - error.
+ **/
+void
+lpfc_handle_eratt(struct lpfc_hba *phba)
+{
+ (*phba->lpfc_handle_eratt)(phba);
+}
+
+/**
* lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
@@ -1137,7 +1341,7 @@
* 0 - pointer to the VPD passed in is NULL
* 1 - success
**/
-static int
+int
lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
{
uint8_t lenlo, lenhi;
@@ -1292,6 +1496,7 @@
uint16_t dev_id = phba->pcidev->device;
int max_speed;
int GE = 0;
+ int oneConnect = 0; /* default is not a oneConnect */
struct {
char * name;
int max_speed;
@@ -1437,6 +1642,14 @@
case PCI_DEVICE_ID_PROTEUS_S:
m = (typeof(m)) {"LPemv12002-S", max_speed, "PCIe IOV"};
break;
+ case PCI_DEVICE_ID_TIGERSHARK:
+ oneConnect = 1;
+ m = (typeof(m)) {"OCe10100-F", max_speed, "PCIe"};
+ break;
+ case PCI_DEVICE_ID_TIGERSHARK_S:
+ oneConnect = 1;
+ m = (typeof(m)) {"OCe10100-F-S", max_speed, "PCIe"};
+ break;
default:
m = (typeof(m)){ NULL };
break;
@@ -1444,13 +1657,24 @@
if (mdp && mdp[0] == '\0')
snprintf(mdp, 79,"%s", m.name);
- if (descp && descp[0] == '\0')
- snprintf(descp, 255,
- "Emulex %s %d%s %s %s",
- m.name, m.max_speed,
- (GE) ? "GE" : "Gb",
- m.bus,
- (GE) ? "FCoE Adapter" : "Fibre Channel Adapter");
+ /* oneConnect hba requires special processing, they are all initiators
+ * and we put the port number on the end
+ */
+ if (descp && descp[0] == '\0') {
+ if (oneConnect)
+ snprintf(descp, 255,
+ "Emulex OneConnect %s, FCoE Initiator, Port %s",
+ m.name,
+ phba->Port);
+ else
+ snprintf(descp, 255,
+ "Emulex %s %d%s %s %s",
+ m.name, m.max_speed,
+ (GE) ? "GE" : "Gb",
+ m.bus,
+ (GE) ? "FCoE Adapter" :
+ "Fibre Channel Adapter");
+ }
}
/**
@@ -1533,7 +1757,8 @@
icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
icmd->ulpLe = 1;
- if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, pring->ringno, iocb, 0) ==
+ IOCB_ERROR) {
lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
kfree(mp1);
cnt++;
@@ -1761,7 +1986,6 @@
* Lets wait for this to happen, if needed.
*/
while (!list_empty(&vport->fc_nodes)) {
-
if (i++ > 3000) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY,
"0233 Nodelist not empty\n");
@@ -1782,7 +2006,6 @@
/* Wait for any activity on ndlps to settle */
msleep(10);
}
- return;
}
/**
@@ -1803,22 +2026,36 @@
}
/**
- * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
+ * lpfc_stop_hba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
* invoked before either putting a HBA offline or unloading the driver.
**/
-static void
-lpfc_stop_phba_timers(struct lpfc_hba *phba)
+void
+lpfc_stop_hba_timers(struct lpfc_hba *phba)
{
- del_timer_sync(&phba->fcp_poll_timer);
lpfc_stop_vport_timers(phba->pport);
del_timer_sync(&phba->sli.mbox_tmo);
del_timer_sync(&phba->fabric_block_timer);
- phba->hb_outstanding = 0;
- del_timer_sync(&phba->hb_tmofunc);
del_timer_sync(&phba->eratt_poll);
+ del_timer_sync(&phba->hb_tmofunc);
+ phba->hb_outstanding = 0;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ /* Stop any LightPulse device specific driver timers */
+ del_timer_sync(&phba->fcp_poll_timer);
+ break;
+ case LPFC_PCI_DEV_OC:
+ /* Stop any OneConnect device sepcific driver timers */
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0297 Invalid device group (x%x)\n",
+ phba->pci_dev_grp);
+ break;
+ }
return;
}
@@ -1878,14 +2115,21 @@
return 1;
}
- if (lpfc_sli_hba_setup(phba)) { /* Initialize the HBA */
- lpfc_unblock_mgmt_io(phba);
- return 1;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ if (lpfc_sli4_hba_setup(phba)) { /* Initialize SLI4 HBA */
+ lpfc_unblock_mgmt_io(phba);
+ return 1;
+ }
+ } else {
+ if (lpfc_sli_hba_setup(phba)) { /* Initialize SLI2/SLI3 HBA */
+ lpfc_unblock_mgmt_io(phba);
+ return 1;
+ }
}
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
@@ -1947,11 +2191,12 @@
/* Issue an unreg_login to all nodes on all vports */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL) {
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
struct Scsi_Host *shost;
if (vports[i]->load_flag & FC_UNLOADING)
continue;
+ vports[i]->vfi_state &= ~LPFC_VFI_REGISTERED;
shost = lpfc_shost_from_vport(vports[i]);
list_for_each_entry_safe(ndlp, next_ndlp,
&vports[i]->fc_nodes,
@@ -1975,7 +2220,7 @@
}
lpfc_destroy_vport_work_array(phba, vports);
- lpfc_sli_flush_mbox_queue(phba);
+ lpfc_sli_mbox_sys_shutdown(phba);
}
/**
@@ -1996,11 +2241,11 @@
if (phba->pport->fc_flag & FC_OFFLINE_MODE)
return;
- /* stop all timers associated with this hba */
- lpfc_stop_phba_timers(phba);
+ /* stop port and all timers associated with this hba */
+ lpfc_stop_port(phba);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++)
lpfc_stop_vport_timers(vports[i]);
lpfc_destroy_vport_work_array(phba, vports);
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2013,7 +2258,7 @@
spin_unlock_irq(&phba->hbalock);
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
spin_lock_irq(shost->host_lock);
vports[i]->work_port_events = 0;
@@ -2106,6 +2351,10 @@
shost->max_lun = vport->cfg_max_luns;
shost->this_id = -1;
shost->max_cmd_len = 16;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ shost->dma_boundary = LPFC_SLI4_MAX_SEGMENT_SIZE;
+ shost->sg_tablesize = phba->cfg_sg_seg_cnt;
+ }
/*
* Set initial can_queue value since 0 is no longer supported and
@@ -2123,6 +2372,7 @@
/* Initialize all internally managed lists. */
INIT_LIST_HEAD(&vport->fc_nodes);
+ INIT_LIST_HEAD(&vport->rcv_buffer_list);
spin_lock_init(&vport->work_port_lock);
init_timer(&vport->fc_disctmo);
@@ -2314,15 +2564,3461 @@
}
/**
- * lpfc_enable_msix - Enable MSI-X interrupt mode
+ * lpfc_stop_port_s3 - Stop SLI3 device port
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to enable the MSI-X interrupt vectors. The kernel
- * function pci_enable_msix() is called to enable the MSI-X vectors. Note that
- * pci_enable_msix(), once invoked, enables either all or nothing, depending
- * on the current availability of PCI vector resources. The device driver is
- * responsible for calling the individual request_irq() to register each MSI-X
- * vector with a interrupt handler, which is done in this function. Note that
+ * This routine is invoked to stop an SLI3 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s3(struct lpfc_hba *phba)
+{
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr); /* flush */
+ /* Clear all pending interrupts */
+ writel(0xffffffff, phba->HAregaddr);
+ readl(phba->HAregaddr); /* flush */
+
+ /* Reset some HBA SLI setup states */
+ lpfc_stop_hba_timers(phba);
+ phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_stop_port_s4 - Stop SLI4 device port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to stop an SLI4 device port, it stops the device
+ * from generating interrupts and stops the device driver's timers for the
+ * device.
+ **/
+static void
+lpfc_stop_port_s4(struct lpfc_hba *phba)
+{
+ /* Reset some HBA SLI4 setup states */
+ lpfc_stop_hba_timers(phba);
+ phba->pport->work_port_events = 0;
+ phba->sli4_hba.intr_enable = 0;
+ /* Hard clear it for now, shall have more graceful way to wait later */
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+}
+
+/**
+ * lpfc_stop_port - Wrapper function for stopping hba port
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba stop port routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ **/
+void
+lpfc_stop_port(struct lpfc_hba *phba)
+{
+ phba->lpfc_stop_port(phba);
+}
+
+/**
+ * lpfc_sli4_remove_dflt_fcf - Remove the driver default fcf record from the port.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the driver default fcf record from
+ * the port. This routine currently acts on FCF Index 0.
+ *
+ **/
+void
+lpfc_sli_remove_dflt_fcf(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_del_fcf_tbl_entry *del_fcf_record;
+ uint32_t mbox_tmo, req_len;
+ uint32_t shdr_status, shdr_add_status;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2020 Failed to allocate mbox for ADD_FCF cmd\n");
+ return;
+ }
+
+ req_len = sizeof(struct lpfc_mbx_del_fcf_tbl_entry) -
+ sizeof(struct lpfc_sli4_cfg_mhdr);
+ rc = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_DELETE_FCF,
+ req_len, LPFC_SLI4_MBX_EMBED);
+ /*
+ * In phase 1, there is a single FCF index, 0. In phase2, the driver
+ * supports multiple FCF indices.
+ */
+ del_fcf_record = &mboxq->u.mqe.un.del_fcf_entry;
+ bf_set(lpfc_mbx_del_fcf_tbl_count, del_fcf_record, 1);
+ bf_set(lpfc_mbx_del_fcf_tbl_index, del_fcf_record,
+ phba->fcf.fcf_indx);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ }
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr_status = bf_get(lpfc_mbox_hdr_status,
+ &del_fcf_record->header.cfg_shdr.response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &del_fcf_record->header.cfg_shdr.response);
+ if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2516 DEL FCF of default FCF Index failed "
+ "mbx status x%x, status x%x add_status x%x\n",
+ rc, shdr_status, shdr_add_status);
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link fault code and
+ * translate it into the base driver's read link attention mailbox command
+ * status.
+ *
+ * Return: Link-attention status in terms of base driver's coding.
+ **/
+static uint16_t
+lpfc_sli4_parse_latt_fault(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint16_t latt_fault;
+
+ switch (bf_get(lpfc_acqe_link_fault, acqe_link)) {
+ case LPFC_ASYNC_LINK_FAULT_NONE:
+ case LPFC_ASYNC_LINK_FAULT_LOCAL:
+ case LPFC_ASYNC_LINK_FAULT_REMOTE:
+ latt_fault = 0;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0398 Invalid link fault code: x%x\n",
+ bf_get(lpfc_acqe_link_fault, acqe_link));
+ latt_fault = MBXERR_ERROR;
+ break;
+ }
+ return latt_fault;
+}
+
+/**
+ * lpfc_sli4_parse_latt_type - Parse sli4 link attention type
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link attention type and translate it
+ * into the base driver's link attention type coding.
+ *
+ * Return: Link attention type in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint8_t att_type;
+
+ switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
+ case LPFC_ASYNC_LINK_STATUS_DOWN:
+ case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
+ att_type = AT_LINK_DOWN;
+ break;
+ case LPFC_ASYNC_LINK_STATUS_UP:
+ /* Ignore physical link up events - wait for logical link up */
+ att_type = AT_RESERVED;
+ break;
+ case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
+ att_type = AT_LINK_UP;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0399 Invalid link attention type: x%x\n",
+ bf_get(lpfc_acqe_link_status, acqe_link));
+ att_type = AT_RESERVED;
+ break;
+ }
+ return att_type;
+}
+
+/**
+ * lpfc_sli4_parse_latt_link_speed - Parse sli4 link-attention link speed
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to parse the SLI4 link-attention link speed and translate
+ * it into the base driver's link-attention link speed coding.
+ *
+ * Return: Link-attention link speed in terms of base driver's coding.
+ **/
+static uint8_t
+lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ uint8_t link_speed;
+
+ switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
+ case LPFC_ASYNC_LINK_SPEED_ZERO:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_10MBPS:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_100MBPS:
+ link_speed = LA_UNKNW_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_1GBPS:
+ link_speed = LA_1GHZ_LINK;
+ break;
+ case LPFC_ASYNC_LINK_SPEED_10GBPS:
+ link_speed = LA_10GHZ_LINK;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0483 Invalid link-attention link speed: x%x\n",
+ bf_get(lpfc_acqe_link_speed, acqe_link));
+ link_speed = LA_UNKNW_LINK;
+ break;
+ }
+ return link_speed;
+}
+
+/**
+ * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async link completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous link event.
+ **/
+static void
+lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_link *acqe_link)
+{
+ struct lpfc_dmabuf *mp;
+ LPFC_MBOXQ_t *pmb;
+ MAILBOX_t *mb;
+ READ_LA_VAR *la;
+ uint8_t att_type;
+
+ att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
+ if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+ return;
+ pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0395 The mboxq allocation failed\n");
+ return;
+ }
+ mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!mp) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0396 The lpfc_dmabuf allocation failed\n");
+ goto out_free_pmb;
+ }
+ mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+ if (!mp->virt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0397 The mbuf allocation failed\n");
+ goto out_free_dmabuf;
+ }
+
+ /* Cleanup any outstanding ELS commands */
+ lpfc_els_flush_all_cmd(phba);
+
+ /* Block ELS IOCBs until we have done process link event */
+ phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
+
+ /* Update link event statistics */
+ phba->sli.slistat.link_event++;
+
+ /* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
+ lpfc_read_la(phba, pmb, mp);
+ pmb->vport = phba->pport;
+
+ /* Parse and translate status field */
+ mb = &pmb->u.mb;
+ mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
+
+ /* Parse and translate link attention fields */
+ la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+ la->eventTag = acqe_link->event_tag;
+ la->attType = att_type;
+ la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+
+ /* Fake the the following irrelvant fields */
+ la->topology = TOPOLOGY_PT_PT;
+ la->granted_AL_PA = 0;
+ la->il = 0;
+ la->pb = 0;
+ la->fa = 0;
+ la->mm = 0;
+
+ /* Keep the link status for extra SLI4 state machine reference */
+ phba->sli4_hba.link_state.speed =
+ bf_get(lpfc_acqe_link_speed, acqe_link);
+ phba->sli4_hba.link_state.duplex =
+ bf_get(lpfc_acqe_link_duplex, acqe_link);
+ phba->sli4_hba.link_state.status =
+ bf_get(lpfc_acqe_link_status, acqe_link);
+ phba->sli4_hba.link_state.physical =
+ bf_get(lpfc_acqe_link_physical, acqe_link);
+ phba->sli4_hba.link_state.fault =
+ bf_get(lpfc_acqe_link_fault, acqe_link);
+
+ /* Invoke the lpfc_handle_latt mailbox command callback function */
+ lpfc_mbx_cmpl_read_la(phba, pmb);
+
+ return;
+
+out_free_dmabuf:
+ kfree(mp);
+out_free_pmb:
+ mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async fcoe completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous fcoe event.
+ **/
+static void
+lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_fcoe *acqe_fcoe)
+{
+ uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+ int rc;
+
+ switch (event_type) {
+ case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2546 New FCF found index 0x%x tag 0x%x \n",
+ acqe_fcoe->fcf_index,
+ acqe_fcoe->event_tag);
+ /*
+ * If the current FCF is in discovered state,
+ * do nothing.
+ */
+ spin_lock_irq(&phba->hbalock);
+ if (phba->fcf.fcf_flag & FCF_DISCOVERED) {
+ spin_unlock_irq(&phba->hbalock);
+ break;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Read the FCF table and re-discover SAN. */
+ rc = lpfc_sli4_read_fcf_record(phba,
+ LPFC_FCOE_FCF_GET_FIRST);
+ if (rc)
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2547 Read FCF record failed 0x%x\n",
+ rc);
+ break;
+
+ case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2548 FCF Table full count 0x%x tag 0x%x \n",
+ bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
+ acqe_fcoe->event_tag);
+ break;
+
+ case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+ lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+ "2549 FCF disconnected fron network index 0x%x"
+ " tag 0x%x \n", acqe_fcoe->fcf_index,
+ acqe_fcoe->event_tag);
+ /* If the event is not for currently used fcf do nothing */
+ if (phba->fcf.fcf_indx != acqe_fcoe->fcf_index)
+ break;
+ /*
+ * Currently, driver support only one FCF - so treat this as
+ * a link down.
+ */
+ lpfc_linkdown(phba);
+ /* Unregister FCF if no devices connected to it */
+ lpfc_unregister_unused_fcf(phba);
+ break;
+
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0288 Unknown FCoE event type 0x%x event tag "
+ "0x%x\n", event_type, acqe_fcoe->event_tag);
+ break;
+ }
+}
+
+/**
+ * lpfc_sli4_async_dcbx_evt - Process the asynchronous dcbx event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_link: pointer to the async dcbx completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous dcbx event.
+ **/
+static void
+lpfc_sli4_async_dcbx_evt(struct lpfc_hba *phba,
+ struct lpfc_acqe_dcbx *acqe_dcbx)
+{
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0290 The SLI4 DCBX asynchronous event is not "
+ "handled yet\n");
+}
+
+/**
+ * lpfc_sli4_async_event_proc - Process all the pending asynchronous event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 asynchronous events.
+ **/
+void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the async event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~ASYNC_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the async events */
+ while (!list_empty(&phba->sli4_hba.sp_asynce_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_asynce_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Process the asynchronous event */
+ switch (bf_get(lpfc_trailer_code, &cq_event->cqe.mcqe_cmpl)) {
+ case LPFC_TRAILER_CODE_LINK:
+ lpfc_sli4_async_link_evt(phba,
+ &cq_event->cqe.acqe_link);
+ break;
+ case LPFC_TRAILER_CODE_FCOE:
+ lpfc_sli4_async_fcoe_evt(phba,
+ &cq_event->cqe.acqe_fcoe);
+ break;
+ case LPFC_TRAILER_CODE_DCBX:
+ lpfc_sli4_async_dcbx_evt(phba,
+ &cq_event->cqe.acqe_dcbx);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "1804 Invalid asynchrous event code: "
+ "x%x\n", bf_get(lpfc_trailer_code,
+ &cq_event->cqe.mcqe_cmpl));
+ break;
+ }
+ /* Free the completion event processed to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+/**
+ * lpfc_api_table_setup - Set up per hba pci-device group func api jump table
+ * @phba: pointer to lpfc hba data structure.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine is invoked to set up the per HBA PCI-Device group function
+ * API jump table entries.
+ *
+ * Return: 0 if success, otherwise -ENODEV
+ **/
+int
+lpfc_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+ int rc;
+
+ /* Set up lpfc PCI-device group */
+ phba->pci_dev_grp = dev_grp;
+
+ /* The LPFC_PCI_DEV_OC uses SLI4 */
+ if (dev_grp == LPFC_PCI_DEV_OC)
+ phba->sli_rev = LPFC_SLI_REV4;
+
+ /* Set up device INIT API function jump table */
+ rc = lpfc_init_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up SCSI API function jump table */
+ rc = lpfc_scsi_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up SLI API function jump table */
+ rc = lpfc_sli_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+ /* Set up MBOX API function jump table */
+ rc = lpfc_mbox_api_table_setup(phba, dev_grp);
+ if (rc)
+ return -ENODEV;
+
+ return 0;
+}
+
+/**
+ * lpfc_log_intr_mode - Log the active interrupt mode
+ * @phba: pointer to lpfc hba data structure.
+ * @intr_mode: active interrupt mode adopted.
+ *
+ * This routine it invoked to log the currently used active interrupt mode
+ * to the device.
+ **/
+static void lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
+{
+ switch (intr_mode) {
+ case 0:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0470 Enable INTx interrupt mode.\n");
+ break;
+ case 1:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0481 Enabled MSI interrupt mode.\n");
+ break;
+ case 2:
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0480 Enabled MSI-X interrupt mode.\n");
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0482 Illegal interrupt mode.\n");
+ break;
+ }
+ return;
+}
+
+/**
+ * lpfc_enable_pci_dev - Enable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the PCI device that is common to all
+ * PCI devices.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_enable_pci_dev(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ int bars;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ goto out_error;
+ else
+ pdev = phba->pcidev;
+ /* Select PCI BARs */
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ /* Enable PCI device */
+ if (pci_enable_device_mem(pdev))
+ goto out_error;
+ /* Request PCI resource for the device */
+ if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
+ goto out_disable_device;
+ /* Set up device as PCI master and save state for EEH */
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+ pci_save_state(pdev);
+
+ return 0;
+
+out_disable_device:
+ pci_disable_device(pdev);
+out_error:
+ return -ENODEV;
+}
+
+/**
+ * lpfc_disable_pci_dev - Disable a generic PCI device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the PCI device that is common to all
+ * PCI devices.
+ **/
+static void
+lpfc_disable_pci_dev(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ int bars;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+ /* Select PCI BARs */
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ /* Release PCI resource and disable PCI device */
+ pci_release_selected_regions(pdev, bars);
+ pci_disable_device(pdev);
+ /* Null out PCI private reference to driver */
+ pci_set_drvdata(pdev, NULL);
+
+ return;
+}
+
+/**
+ * lpfc_reset_hba - Reset a hba
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to reset a hba device. It brings the HBA
+ * offline, performs a board restart, and then brings the board back
+ * online. The lpfc_offline calls lpfc_sli_hba_down which will clean up
+ * on outstanding mailbox commands.
+ **/
+void
+lpfc_reset_hba(struct lpfc_hba *phba)
+{
+ /* If resets are disabled then set error state and return. */
+ if (!phba->cfg_enable_hba_reset) {
+ phba->link_state = LPFC_HBA_ERROR;
+ return;
+ }
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ lpfc_sli_brdrestart(phba);
+ lpfc_online(phba);
+ lpfc_unblock_mgmt_io(phba);
+}
+
+/**
+ * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-3 HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli_driver_resource_setup(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli;
+
+ /*
+ * Initialize timers used by driver
+ */
+
+ /* Heartbeat timer */
+ init_timer(&phba->hb_tmofunc);
+ phba->hb_tmofunc.function = lpfc_hb_timeout;
+ phba->hb_tmofunc.data = (unsigned long)phba;
+
+ psli = &phba->sli;
+ /* MBOX heartbeat timer */
+ init_timer(&psli->mbox_tmo);
+ psli->mbox_tmo.function = lpfc_mbox_timeout;
+ psli->mbox_tmo.data = (unsigned long) phba;
+ /* FCP polling mode timer */
+ init_timer(&phba->fcp_poll_timer);
+ phba->fcp_poll_timer.function = lpfc_poll_timeout;
+ phba->fcp_poll_timer.data = (unsigned long) phba;
+ /* Fabric block timer */
+ init_timer(&phba->fabric_block_timer);
+ phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+ phba->fabric_block_timer.data = (unsigned long) phba;
+ /* EA polling mode timer */
+ init_timer(&phba->eratt_poll);
+ phba->eratt_poll.function = lpfc_poll_eratt;
+ phba->eratt_poll.data = (unsigned long) phba;
+
+ /* Host attention work mask setup */
+ phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
+ phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+
+ /* Get all the module params for configuring this host */
+ lpfc_get_cfgparam(phba);
+ /*
+ * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
+ */
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp) +
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct ulp_bde64));
+
+ if (phba->cfg_enable_bg) {
+ phba->cfg_sg_seg_cnt = LPFC_MAX_SG_SEG_CNT;
+ phba->cfg_sg_dma_buf_size +=
+ phba->cfg_prot_sg_seg_cnt * sizeof(struct ulp_bde64);
+ }
+
+ /* Also reinitialize the host templates with new values. */
+ lpfc_vport_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+ lpfc_template.sg_tablesize = phba->cfg_sg_seg_cnt;
+
+ phba->max_vpi = LPFC_MAX_VPI;
+ /* This will be set to correct value after config_port mbox */
+ phba->max_vports = 0;
+
+ /*
+ * Initialize the SLI Layer to run with lpfc HBAs.
+ */
+ lpfc_sli_setup(phba);
+ lpfc_sli_queue_setup(phba);
+
+ /* Allocate device driver memory */
+ if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ))
+ return -ENOMEM;
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_driver_resource_unset - Unset drvr internal resources for SLI3 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-3 HBA device it attached to.
+ **/
+static void
+lpfc_sli_driver_resource_unset(struct lpfc_hba *phba)
+{
+ /* Free device driver memory allocated */
+ lpfc_mem_free_all(phba);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_driver_resource_setup - Setup drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources specific to
+ * support the SLI-4 HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli;
+ int rc;
+ int i, hbq_count;
+
+ /* Before proceed, wait for POST done and device ready */
+ rc = lpfc_sli4_post_status_check(phba);
+ if (rc)
+ return -ENODEV;
+
+ /*
+ * Initialize timers used by driver
+ */
+
+ /* Heartbeat timer */
+ init_timer(&phba->hb_tmofunc);
+ phba->hb_tmofunc.function = lpfc_hb_timeout;
+ phba->hb_tmofunc.data = (unsigned long)phba;
+
+ psli = &phba->sli;
+ /* MBOX heartbeat timer */
+ init_timer(&psli->mbox_tmo);
+ psli->mbox_tmo.function = lpfc_mbox_timeout;
+ psli->mbox_tmo.data = (unsigned long) phba;
+ /* Fabric block timer */
+ init_timer(&phba->fabric_block_timer);
+ phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
+ phba->fabric_block_timer.data = (unsigned long) phba;
+ /* EA polling mode timer */
+ init_timer(&phba->eratt_poll);
+ phba->eratt_poll.function = lpfc_poll_eratt;
+ phba->eratt_poll.data = (unsigned long) phba;
+ /*
+ * We need to do a READ_CONFIG mailbox command here before
+ * calling lpfc_get_cfgparam. For VFs this will report the
+ * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings.
+ * All of the resources allocated
+ * for this Port are tied to these values.
+ */
+ /* Get all the module params for configuring this host */
+ lpfc_get_cfgparam(phba);
+ phba->max_vpi = LPFC_MAX_VPI;
+ /* This will be set to correct value after the read_config mbox */
+ phba->max_vports = 0;
+
+ /* Program the default value of vlan_id and fc_map */
+ phba->valid_vlan = 0;
+ phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+ phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+ phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+ /*
+ * Since the sg_tablesize is module parameter, the sg_dma_buf_size
+ * used to create the sg_dma_buf_pool must be dynamically calculated.
+ * 2 segments are added since the IOCB needs a command and response bde.
+ * To insure that the scsi sgl does not cross a 4k page boundary only
+ * sgl sizes of 1k, 2k, 4k, and 8k are supported.
+ * Table of sgl sizes and seg_cnt:
+ * sgl size, sg_seg_cnt total seg
+ * 1k 50 52
+ * 2k 114 116
+ * 4k 242 244
+ * 8k 498 500
+ * cmd(32) + rsp(160) + (52 * sizeof(sli4_sge)) = 1024
+ * cmd(32) + rsp(160) + (116 * sizeof(sli4_sge)) = 2048
+ * cmd(32) + rsp(160) + (244 * sizeof(sli4_sge)) = 4096
+ * cmd(32) + rsp(160) + (500 * sizeof(sli4_sge)) = 8192
+ */
+ if (phba->cfg_sg_seg_cnt <= LPFC_DEFAULT_SG_SEG_CNT)
+ phba->cfg_sg_seg_cnt = 50;
+ else if (phba->cfg_sg_seg_cnt <= 114)
+ phba->cfg_sg_seg_cnt = 114;
+ else if (phba->cfg_sg_seg_cnt <= 242)
+ phba->cfg_sg_seg_cnt = 242;
+ else
+ phba->cfg_sg_seg_cnt = 498;
+
+ phba->cfg_sg_dma_buf_size = sizeof(struct fcp_cmnd)
+ + sizeof(struct fcp_rsp);
+ phba->cfg_sg_dma_buf_size +=
+ ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge));
+
+ /* Initialize buffer queue management fields */
+ hbq_count = lpfc_sli_hbq_count();
+ for (i = 0; i < hbq_count; ++i)
+ INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+ INIT_LIST_HEAD(&phba->rb_pend_list);
+ phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_sli4_rb_alloc;
+ phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_sli4_rb_free;
+
+ /*
+ * Initialize the SLI Layer to run with lpfc SLI4 HBAs.
+ */
+ /* Initialize the Abort scsi buffer list used by driver */
+ spin_lock_init(&phba->sli4_hba.abts_scsi_buf_list_lock);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_scsi_buf_list);
+ /* This abort list used by worker thread */
+ spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock);
+
+ /*
+ * Initialize dirver internal slow-path work queues
+ */
+
+ /* Driver internel slow-path CQ Event pool */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_cqe_event_pool);
+ /* Response IOCB work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_rspiocb_work_queue);
+ /* Asynchronous event CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_asynce_work_queue);
+ /* Fast-path XRI aborted CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+ /* Slow-path XRI aborted CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_els_xri_aborted_work_queue);
+ /* Receive queue CQ Event work queue list */
+ INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue);
+
+ /* Initialize the driver internal SLI layer lists. */
+ lpfc_sli_setup(phba);
+ lpfc_sli_queue_setup(phba);
+
+ /* Allocate device driver memory */
+ rc = lpfc_mem_alloc(phba, SGL_ALIGN_SZ);
+ if (rc)
+ return -ENOMEM;
+
+ /* Create the bootstrap mailbox command */
+ rc = lpfc_create_bootstrap_mbox(phba);
+ if (unlikely(rc))
+ goto out_free_mem;
+
+ /* Set up the host's endian order with the device. */
+ rc = lpfc_setup_endian_order(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Set up the hba's configuration parameters. */
+ rc = lpfc_sli4_read_config(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Perform a function reset */
+ rc = lpfc_pci_function_reset(phba);
+ if (unlikely(rc))
+ goto out_free_bsmbx;
+
+ /* Create all the SLI4 queues */
+ rc = lpfc_sli4_queue_create(phba);
+ if (rc)
+ goto out_free_bsmbx;
+
+ /* Create driver internal CQE event pool */
+ rc = lpfc_sli4_cq_event_pool_create(phba);
+ if (rc)
+ goto out_destroy_queue;
+
+ /* Initialize and populate the iocb list per host */
+ rc = lpfc_init_sgl_list(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1400 Failed to initialize sgl list.\n");
+ goto out_destroy_cq_event_pool;
+ }
+ rc = lpfc_init_active_sgl_array(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1430 Failed to initialize sgl list.\n");
+ goto out_free_sgl_list;
+ }
+
+ rc = lpfc_sli4_init_rpi_hdrs(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1432 Failed to initialize rpi headers.\n");
+ goto out_free_active_sgl;
+ }
+
+ phba->sli4_hba.fcp_eq_hdl = kzalloc((sizeof(struct lpfc_fcp_eq_hdl) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_eq_hdl) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2572 Failed allocate memory for fast-path "
+ "per-EQ handle array\n");
+ goto out_remove_rpi_hdrs;
+ }
+
+ phba->sli4_hba.msix_entries = kzalloc((sizeof(struct msix_entry) *
+ phba->sli4_hba.cfg_eqn), GFP_KERNEL);
+ if (!phba->sli4_hba.msix_entries) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2573 Failed allocate memory for msi-x "
+ "interrupt vector entries\n");
+ goto out_free_fcp_eq_hdl;
+ }
+
+ return rc;
+
+out_free_fcp_eq_hdl:
+ kfree(phba->sli4_hba.fcp_eq_hdl);
+out_remove_rpi_hdrs:
+ lpfc_sli4_remove_rpi_hdrs(phba);
+out_free_active_sgl:
+ lpfc_free_active_sgl(phba);
+out_free_sgl_list:
+ lpfc_free_sgl_list(phba);
+out_destroy_cq_event_pool:
+ lpfc_sli4_cq_event_pool_destroy(phba);
+out_destroy_queue:
+ lpfc_sli4_queue_destroy(phba);
+out_free_bsmbx:
+ lpfc_destroy_bootstrap_mbox(phba);
+out_free_mem:
+ lpfc_mem_free(phba);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_driver_resource_unset - Unset drvr internal resources for SLI4 dev
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up
+ * specific for supporting the SLI-4 HBA device it attached to.
+ **/
+static void
+lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
+{
+ struct lpfc_fcf_conn_entry *conn_entry, *next_conn_entry;
+
+ /* unregister default FCFI from the HBA */
+ lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
+ /* Free the default FCR table */
+ lpfc_sli_remove_dflt_fcf(phba);
+
+ /* Free memory allocated for msi-x interrupt vector entries */
+ kfree(phba->sli4_hba.msix_entries);
+
+ /* Free memory allocated for fast-path work queue handles */
+ kfree(phba->sli4_hba.fcp_eq_hdl);
+
+ /* Free the allocated rpi headers. */
+ lpfc_sli4_remove_rpi_hdrs(phba);
+
+ /* Free the ELS sgl list */
+ lpfc_free_active_sgl(phba);
+ lpfc_free_sgl_list(phba);
+
+ /* Free the SCSI sgl management array */
+ kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+
+ /* Free the SLI4 queues */
+ lpfc_sli4_queue_destroy(phba);
+
+ /* Free the completion queue EQ event pool */
+ lpfc_sli4_cq_event_release_all(phba);
+ lpfc_sli4_cq_event_pool_destroy(phba);
+
+ /* Reset SLI4 HBA FCoE function */
+ lpfc_pci_function_reset(phba);
+
+ /* Free the bsmbx region. */
+ lpfc_destroy_bootstrap_mbox(phba);
+
+ /* Free the SLI Layer memory with SLI4 HBAs */
+ lpfc_mem_free_all(phba);
+
+ /* Free the current connect table */
+ list_for_each_entry_safe(conn_entry, next_conn_entry,
+ &phba->fcf_conn_rec_list, list)
+ kfree(conn_entry);
+
+ return;
+}
+
+/**
+ * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the device INIT interface API function jump table
+ * in @phba struct.
+ *
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_init_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_hba_down_post = lpfc_hba_down_post_s3;
+ phba->lpfc_handle_eratt = lpfc_handle_eratt_s3;
+ phba->lpfc_stop_port = lpfc_stop_port_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_hba_down_post = lpfc_hba_down_post_s4;
+ phba->lpfc_handle_eratt = lpfc_handle_eratt_s4;
+ phba->lpfc_stop_port = lpfc_stop_port_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1431 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase1 - Phase1 etup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources before the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase1(struct lpfc_hba *phba)
+{
+ /*
+ * Driver resources common to all SLI revisions
+ */
+ atomic_set(&phba->fast_event_count, 0);
+ spin_lock_init(&phba->hbalock);
+
+ /* Initialize ndlp management spinlock */
+ spin_lock_init(&phba->ndlp_lock);
+
+ INIT_LIST_HEAD(&phba->port_list);
+ INIT_LIST_HEAD(&phba->work_list);
+ init_waitqueue_head(&phba->wait_4_mlo_m_q);
+
+ /* Initialize the wait queue head for the kernel thread */
+ init_waitqueue_head(&phba->work_waitq);
+
+ /* Initialize the scsi buffer list used by driver for scsi IO */
+ spin_lock_init(&phba->scsi_buf_list_lock);
+ INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+
+ /* Initialize the fabric iocb list */
+ INIT_LIST_HEAD(&phba->fabric_iocb_list);
+
+ /* Initialize list to save ELS buffers */
+ INIT_LIST_HEAD(&phba->elsbuf);
+
+ /* Initialize FCF connection rec list */
+ INIT_LIST_HEAD(&phba->fcf_conn_rec_list);
+
+ return 0;
+}
+
+/**
+ * lpfc_setup_driver_resource_phase2 - Phase2 setup driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the driver internal resources after the
+ * device specific resource setup to support the HBA device it attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_setup_driver_resource_phase2(struct lpfc_hba *phba)
+{
+ int error;
+
+ /* Startup the kernel thread for this host adapter. */
+ phba->worker_thread = kthread_run(lpfc_do_work, phba,
+ "lpfc_worker_%d", phba->brd_no);
+ if (IS_ERR(phba->worker_thread)) {
+ error = PTR_ERR(phba->worker_thread);
+ return error;
+ }
+
+ return 0;
+}
+
+/**
+ * lpfc_unset_driver_resource_phase2 - Phase2 unset driver internal resources.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the driver internal resources set up after
+ * the device specific resource setup for supporting the HBA device it
+ * attached to.
+ **/
+static void
+lpfc_unset_driver_resource_phase2(struct lpfc_hba *phba)
+{
+ /* Stop kernel worker thread */
+ kthread_stop(phba->worker_thread);
+}
+
+/**
+ * lpfc_free_iocb_list - Free iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's IOCB list and memory.
+ **/
+static void
+lpfc_free_iocb_list(struct lpfc_hba *phba)
+{
+ struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
+
+ spin_lock_irq(&phba->hbalock);
+ list_for_each_entry_safe(iocbq_entry, iocbq_next,
+ &phba->lpfc_iocb_list, list) {
+ list_del(&iocbq_entry->list);
+ kfree(iocbq_entry);
+ phba->total_iocbq_bufs--;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ return;
+}
+
+/**
+ * lpfc_init_iocb_list - Allocate and initialize iocb list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's IOCB
+ * list and set up the IOCB tag array accordingly.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count)
+{
+ struct lpfc_iocbq *iocbq_entry = NULL;
+ uint16_t iotag;
+ int i;
+
+ /* Initialize and populate the iocb list per host. */
+ INIT_LIST_HEAD(&phba->lpfc_iocb_list);
+ for (i = 0; i < iocb_count; i++) {
+ iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
+ if (iocbq_entry == NULL) {
+ printk(KERN_ERR "%s: only allocated %d iocbs of "
+ "expected %d count. Unloading driver.\n",
+ __func__, i, LPFC_IOCB_LIST_CNT);
+ goto out_free_iocbq;
+ }
+
+ iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
+ if (iotag == 0) {
+ kfree(iocbq_entry);
+ printk(KERN_ERR "%s: failed to allocate IOTAG. "
+ "Unloading driver.\n", __func__);
+ goto out_free_iocbq;
+ }
+ iocbq_entry->sli4_xritag = NO_XRI;
+
+ spin_lock_irq(&phba->hbalock);
+ list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
+ phba->total_iocbq_bufs++;
+ spin_unlock_irq(&phba->hbalock);
+ }
+
+ return 0;
+
+out_free_iocbq:
+ lpfc_free_iocb_list(phba);
+
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_free_sgl_list - Free sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver's sgl list and memory.
+ **/
+static void
+lpfc_free_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+ LIST_HEAD(sglq_list);
+ int rc = 0;
+
+ spin_lock_irq(&phba->hbalock);
+ list_splice_init(&phba->sli4_hba.lpfc_sgl_list, &sglq_list);
+ spin_unlock_irq(&phba->hbalock);
+
+ list_for_each_entry_safe(sglq_entry, sglq_next,
+ &sglq_list, list) {
+ list_del(&sglq_entry->list);
+ lpfc_mbuf_free(phba, sglq_entry->virt, sglq_entry->phys);
+ kfree(sglq_entry);
+ phba->sli4_hba.total_sglq_bufs--;
+ }
+ rc = lpfc_sli4_remove_all_sgl_pages(phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2005 Unable to deregister pages from HBA: %x", rc);
+ }
+ kfree(phba->sli4_hba.lpfc_els_sgl_array);
+}
+
+/**
+ * lpfc_init_active_sgl_array - Allocate the buf to track active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate the driver's active sgl memory.
+ * This array will hold the sglq_entry's for active IOs.
+ **/
+static int
+lpfc_init_active_sgl_array(struct lpfc_hba *phba)
+{
+ int size;
+ size = sizeof(struct lpfc_sglq *);
+ size *= phba->sli4_hba.max_cfg_param.max_xri;
+
+ phba->sli4_hba.lpfc_sglq_active_list =
+ kzalloc(size, GFP_KERNEL);
+ if (!phba->sli4_hba.lpfc_sglq_active_list)
+ return -ENOMEM;
+ return 0;
+}
+
+/**
+ * lpfc_free_active_sgl - Free the buf that tracks active ELS XRIs.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to walk through the array of active sglq entries
+ * and free all of the resources.
+ * This is just a place holder for now.
+ **/
+static void
+lpfc_free_active_sgl(struct lpfc_hba *phba)
+{
+ kfree(phba->sli4_hba.lpfc_sglq_active_list);
+}
+
+/**
+ * lpfc_init_sgl_list - Allocate and initialize sgl list.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and initizlize the driver's sgl
+ * list and set up the sgl xritag tag array accordingly.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_init_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry = NULL;
+ int i;
+ int els_xri_cnt;
+
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2400 lpfc_init_sgl_list els %d.\n",
+ els_xri_cnt);
+ /* Initialize and populate the sglq list per host/VF. */
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list);
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_abts_els_sgl_list);
+
+ /* Sanity check on XRI management */
+ if (phba->sli4_hba.max_cfg_param.max_xri <= els_xri_cnt) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2562 No room left for SCSI XRI allocation: "
+ "max_xri=%d, els_xri=%d\n",
+ phba->sli4_hba.max_cfg_param.max_xri,
+ els_xri_cnt);
+ return -ENOMEM;
+ }
+
+ /* Allocate memory for the ELS XRI management array */
+ phba->sli4_hba.lpfc_els_sgl_array =
+ kzalloc((sizeof(struct lpfc_sglq *) * els_xri_cnt),
+ GFP_KERNEL);
+
+ if (!phba->sli4_hba.lpfc_els_sgl_array) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2401 Failed to allocate memory for ELS "
+ "XRI management array of size %d.\n",
+ els_xri_cnt);
+ return -ENOMEM;
+ }
+
+ /* Keep the SCSI XRI into the XRI management array */
+ phba->sli4_hba.scsi_xri_max =
+ phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt;
+ phba->sli4_hba.scsi_xri_cnt = 0;
+
+ phba->sli4_hba.lpfc_scsi_psb_array =
+ kzalloc((sizeof(struct lpfc_scsi_buf *) *
+ phba->sli4_hba.scsi_xri_max), GFP_KERNEL);
+
+ if (!phba->sli4_hba.lpfc_scsi_psb_array) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2563 Failed to allocate memory for SCSI "
+ "XRI management array of size %d.\n",
+ phba->sli4_hba.scsi_xri_max);
+ kfree(phba->sli4_hba.lpfc_els_sgl_array);
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < els_xri_cnt; i++) {
+ sglq_entry = kzalloc(sizeof(struct lpfc_sglq), GFP_KERNEL);
+ if (sglq_entry == NULL) {
+ printk(KERN_ERR "%s: only allocated %d sgls of "
+ "expected %d count. Unloading driver.\n",
+ __func__, i, els_xri_cnt);
+ goto out_free_mem;
+ }
+
+ sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba);
+ if (sglq_entry->sli4_xritag == NO_XRI) {
+ kfree(sglq_entry);
+ printk(KERN_ERR "%s: failed to allocate XRI.\n"
+ "Unloading driver.\n", __func__);
+ goto out_free_mem;
+ }
+ sglq_entry->buff_type = GEN_BUFF_TYPE;
+ sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys);
+ if (sglq_entry->virt == NULL) {
+ kfree(sglq_entry);
+ printk(KERN_ERR "%s: failed to allocate mbuf.\n"
+ "Unloading driver.\n", __func__);
+ goto out_free_mem;
+ }
+ sglq_entry->sgl = sglq_entry->virt;
+ memset(sglq_entry->sgl, 0, LPFC_BPL_SIZE);
+
+ /* The list order is used by later block SGL registraton */
+ spin_lock_irq(&phba->hbalock);
+ list_add_tail(&sglq_entry->list, &phba->sli4_hba.lpfc_sgl_list);
+ phba->sli4_hba.lpfc_els_sgl_array[i] = sglq_entry;
+ phba->sli4_hba.total_sglq_bufs++;
+ spin_unlock_irq(&phba->hbalock);
+ }
+ return 0;
+
+out_free_mem:
+ kfree(phba->sli4_hba.lpfc_scsi_psb_array);
+ lpfc_free_sgl_list(phba);
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ * No locks are held here because this is an initialization routine
+ * called only from probe or lpfc_online when interrupts are not
+ * enabled and the driver is reinitializing the device.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba)
+{
+ int rc = 0;
+ int longs;
+ uint16_t rpi_count;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
+
+ /*
+ * Provision an rpi bitmask range for discovery. The total count
+ * is the difference between max and base + 1.
+ */
+ rpi_count = phba->sli4_hba.max_cfg_param.rpi_base +
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+ longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG;
+ phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!phba->sli4_hba.rpi_bmask)
+ return -ENOMEM;
+
+ rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+ if (!rpi_hdr) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0391 Error during rpi post operation\n");
+ lpfc_sli4_remove_rpis(phba);
+ rc = -ENODEV;
+ }
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_create_rpi_hdr - Allocate an rpi header memory region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate a single 4KB memory region to
+ * support rpis and stores them in the phba. This single region
+ * provides support for up to 64 rpis. The region is used globally
+ * by the device.
+ *
+ * Returns:
+ * A valid rpi hdr on success.
+ * A NULL pointer on any failure.
+ **/
+struct lpfc_rpi_hdr *
+lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba)
+{
+ uint16_t rpi_limit, curr_rpi_range;
+ struct lpfc_dmabuf *dmabuf;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base +
+ phba->sli4_hba.max_cfg_param.max_rpi - 1;
+
+ spin_lock_irq(&phba->hbalock);
+ curr_rpi_range = phba->sli4_hba.next_rpi;
+ spin_unlock_irq(&phba->hbalock);
+
+ /*
+ * The port has a limited number of rpis. The increment here
+ * is LPFC_RPI_HDR_COUNT - 1 to account for the starting value
+ * and to allow the full max_rpi range per port.
+ */
+ if ((curr_rpi_range + (LPFC_RPI_HDR_COUNT - 1)) > rpi_limit)
+ return NULL;
+
+ /*
+ * First allocate the protocol header region for the port. The
+ * port expects a 4KB DMA-mapped memory region that is 4K aligned.
+ */
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return NULL;
+
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ LPFC_HDR_TEMPLATE_SIZE,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ rpi_hdr = NULL;
+ goto err_free_dmabuf;
+ }
+
+ memset(dmabuf->virt, 0, LPFC_HDR_TEMPLATE_SIZE);
+ if (!IS_ALIGNED(dmabuf->phys, LPFC_HDR_TEMPLATE_SIZE)) {
+ rpi_hdr = NULL;
+ goto err_free_coherent;
+ }
+
+ /* Save the rpi header data for cleanup later. */
+ rpi_hdr = kzalloc(sizeof(struct lpfc_rpi_hdr), GFP_KERNEL);
+ if (!rpi_hdr)
+ goto err_free_coherent;
+
+ rpi_hdr->dmabuf = dmabuf;
+ rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE;
+ rpi_hdr->page_count = 1;
+ spin_lock_irq(&phba->hbalock);
+ rpi_hdr->start_rpi = phba->sli4_hba.next_rpi;
+ list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list);
+
+ /*
+ * The next_rpi stores the next module-64 rpi value to post
+ * in any subsequent rpi memory region postings.
+ */
+ phba->sli4_hba.next_rpi += LPFC_RPI_HDR_COUNT;
+ spin_unlock_irq(&phba->hbalock);
+ return rpi_hdr;
+
+ err_free_coherent:
+ dma_free_coherent(&phba->pcidev->dev, LPFC_HDR_TEMPLATE_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ err_free_dmabuf:
+ kfree(dmabuf);
+ return NULL;
+}
+
+/**
+ * lpfc_sli4_remove_rpi_hdrs - Remove all rpi header memory regions
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove all memory resources allocated
+ * to support rpis. This routine presumes the caller has released all
+ * rpis consumed by fabric or port logins and is prepared to have
+ * the header pages removed.
+ **/
+void
+lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba)
+{
+ struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr;
+
+ list_for_each_entry_safe(rpi_hdr, next_rpi_hdr,
+ &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+ list_del(&rpi_hdr->list);
+ dma_free_coherent(&phba->pcidev->dev, rpi_hdr->len,
+ rpi_hdr->dmabuf->virt, rpi_hdr->dmabuf->phys);
+ kfree(rpi_hdr->dmabuf);
+ kfree(rpi_hdr);
+ }
+
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+ memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask));
+}
+
+/**
+ * lpfc_hba_alloc - Allocate driver hba data structure for a device.
+ * @pdev: pointer to pci device data structure.
+ *
+ * This routine is invoked to allocate the driver hba data structure for an
+ * HBA device. If the allocation is successful, the phba reference to the
+ * PCI device data structure is set.
+ *
+ * Return codes
+ * pointer to @phba - sucessful
+ * NULL - error
+ **/
+static struct lpfc_hba *
+lpfc_hba_alloc(struct pci_dev *pdev)
+{
+ struct lpfc_hba *phba;
+
+ /* Allocate memory for HBA structure */
+ phba = kzalloc(sizeof(struct lpfc_hba), GFP_KERNEL);
+ if (!phba) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1417 Failed to allocate hba struct.\n");
+ return NULL;
+ }
+
+ /* Set reference to PCI device in HBA structure */
+ phba->pcidev = pdev;
+
+ /* Assign an unused board number */
+ phba->brd_no = lpfc_get_instance();
+ if (phba->brd_no < 0) {
+ kfree(phba);
+ return NULL;
+ }
+
+ return phba;
+}
+
+/**
+ * lpfc_hba_free - Free driver hba data structure with a device.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the driver hba data structure with an
+ * HBA device.
+ **/
+static void
+lpfc_hba_free(struct lpfc_hba *phba)
+{
+ /* Release the driver assigned board number */
+ idr_remove(&lpfc_hba_index, phba->brd_no);
+
+ kfree(phba);
+ return;
+}
+
+/**
+ * lpfc_create_shost - Create hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create HBA physical port and associate a SCSI
+ * host with it.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_create_shost(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport;
+ struct Scsi_Host *shost;
+
+ /* Initialize HBA FC structure */
+ phba->fc_edtov = FF_DEF_EDTOV;
+ phba->fc_ratov = FF_DEF_RATOV;
+ phba->fc_altov = FF_DEF_ALTOV;
+ phba->fc_arbtov = FF_DEF_ARBTOV;
+
+ vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
+ if (!vport)
+ return -ENODEV;
+
+ shost = lpfc_shost_from_vport(vport);
+ phba->pport = vport;
+ lpfc_debugfs_initialize(vport);
+ /* Put reference to SCSI host to driver's device private data */
+ pci_set_drvdata(phba->pcidev, shost);
+
+ return 0;
+}
+
+/**
+ * lpfc_destroy_shost - Destroy hba physical port with associated scsi host.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to destroy HBA physical port and the associated
+ * SCSI host.
+ **/
+static void
+lpfc_destroy_shost(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+
+ /* Destroy physical port that associated with the SCSI host */
+ destroy_port(vport);
+
+ return;
+}
+
+/**
+ * lpfc_setup_bg - Setup Block guard structures and debug areas.
+ * @phba: pointer to lpfc hba data structure.
+ * @shost: the shost to be used to detect Block guard settings.
+ *
+ * This routine sets up the local Block guard protocol settings for @shost.
+ * This routine also allocates memory for debugging bg buffers.
+ **/
+static void
+lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
+{
+ int pagecnt = 10;
+ if (lpfc_prot_mask && lpfc_prot_guard) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "1478 Registering BlockGuard with the "
+ "SCSI layer\n");
+ scsi_host_set_prot(shost, lpfc_prot_mask);
+ scsi_host_set_guard(shost, lpfc_prot_guard);
+ }
+ if (!_dump_buf_data) {
+ while (pagecnt) {
+ spin_lock_init(&_dump_buf_lock);
+ _dump_buf_data =
+ (char *) __get_free_pages(GFP_KERNEL, pagecnt);
+ if (_dump_buf_data) {
+ printk(KERN_ERR "BLKGRD allocated %d pages for "
+ "_dump_buf_data at 0x%p\n",
+ (1 << pagecnt), _dump_buf_data);
+ _dump_buf_data_order = pagecnt;
+ memset(_dump_buf_data, 0,
+ ((1 << PAGE_SHIFT) << pagecnt));
+ break;
+ } else
+ --pagecnt;
+ }
+ if (!_dump_buf_data_order)
+ printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ "memory for hexdump\n");
+ } else
+ printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+ "\n", _dump_buf_data);
+ if (!_dump_buf_dif) {
+ while (pagecnt) {
+ _dump_buf_dif =
+ (char *) __get_free_pages(GFP_KERNEL, pagecnt);
+ if (_dump_buf_dif) {
+ printk(KERN_ERR "BLKGRD allocated %d pages for "
+ "_dump_buf_dif at 0x%p\n",
+ (1 << pagecnt), _dump_buf_dif);
+ _dump_buf_dif_order = pagecnt;
+ memset(_dump_buf_dif, 0,
+ ((1 << PAGE_SHIFT) << pagecnt));
+ break;
+ } else
+ --pagecnt;
+ }
+ if (!_dump_buf_dif_order)
+ printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+ "memory for hexdump\n");
+ } else
+ printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+ _dump_buf_dif);
+}
+
+/**
+ * lpfc_post_init_setup - Perform necessary device post initialization setup.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to perform all the necessary post initialization
+ * setup for the device.
+ **/
+static void
+lpfc_post_init_setup(struct lpfc_hba *phba)
+{
+ struct Scsi_Host *shost;
+ struct lpfc_adapter_event_header adapter_event;
+
+ /* Get the default values for Model Name and Description */
+ lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
+
+ /*
+ * hba setup may have changed the hba_queue_depth so we need to
+ * adjust the value of can_queue.
+ */
+ shost = pci_get_drvdata(phba->pcidev);
+ shost->can_queue = phba->cfg_hba_queue_depth - 10;
+ if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
+ lpfc_setup_bg(phba, shost);
+
+ lpfc_host_attrib_init(shost);
+
+ if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+ spin_lock_irq(shost->host_lock);
+ lpfc_poll_start_timer(phba);
+ spin_unlock_irq(shost->host_lock);
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0428 Perform SCSI scan\n");
+ /* Send board arrival event to upper layer */
+ adapter_event.event_type = FC_REG_ADAPTER_EVENT;
+ adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
+ fc_host_post_vendor_event(shost, fc_get_event_number(),
+ sizeof(adapter_event),
+ (char *) &adapter_event,
+ LPFC_NL_VENDOR_ID);
+ return;
+}
+
+/**
+ * lpfc_sli_pci_mem_setup - Setup SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-3 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli_pci_mem_setup(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ unsigned long bar0map_len, bar2map_len;
+ int i, hbq_count;
+ void *ptr;
+ int error = -ENODEV;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return error;
+ else
+ pdev = phba->pcidev;
+
+ /* Set the device DMA mask size */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ return error;
+
+ /* Get the bus address of Bar0 and Bar2 and the number of bytes
+ * required by each mapping.
+ */
+ phba->pci_bar0_map = pci_resource_start(pdev, 0);
+ bar0map_len = pci_resource_len(pdev, 0);
+
+ phba->pci_bar2_map = pci_resource_start(pdev, 2);
+ bar2map_len = pci_resource_len(pdev, 2);
+
+ /* Map HBA SLIM to a kernel virtual address. */
+ phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
+ if (!phba->slim_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLIM memory.\n");
+ goto out;
+ }
+
+ /* Map HBA Control Registers to a kernel virtual address. */
+ phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
+ if (!phba->ctrl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for HBA control registers.\n");
+ goto out_iounmap_slim;
+ }
+
+ /* Allocate memory for SLI-2 structures */
+ phba->slim2p.virt = dma_alloc_coherent(&pdev->dev,
+ SLI2_SLIM_SIZE,
+ &phba->slim2p.phys,
+ GFP_KERNEL);
+ if (!phba->slim2p.virt)
+ goto out_iounmap;
+
+ memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
+ phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
+ phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
+ phba->IOCBs = (phba->slim2p.virt +
+ offsetof(struct lpfc_sli2_slim, IOCBs));
+
+ phba->hbqslimp.virt = dma_alloc_coherent(&pdev->dev,
+ lpfc_sli_hbq_size(),
+ &phba->hbqslimp.phys,
+ GFP_KERNEL);
+ if (!phba->hbqslimp.virt)
+ goto out_free_slim;
+
+ hbq_count = lpfc_sli_hbq_count();
+ ptr = phba->hbqslimp.virt;
+ for (i = 0; i < hbq_count; ++i) {
+ phba->hbqs[i].hbq_virt = ptr;
+ INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
+ ptr += (lpfc_hbq_defs[i]->entry_count *
+ sizeof(struct lpfc_hbq_entry));
+ }
+ phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
+ phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
+
+ memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
+
+ INIT_LIST_HEAD(&phba->rb_pend_list);
+
+ phba->MBslimaddr = phba->slim_memmap_p;
+ phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+ phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+ phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+ phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+ return 0;
+
+out_free_slim:
+ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ phba->slim2p.virt, phba->slim2p.phys);
+out_iounmap:
+ iounmap(phba->ctrl_regs_memmap_p);
+out_iounmap_slim:
+ iounmap(phba->slim_memmap_p);
+out:
+ return error;
+}
+
+/**
+ * lpfc_sli_pci_mem_unset - Unset SLI3 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-3 interface spec.
+ **/
+static void
+lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+
+ /* Free coherent DMA memory allocated */
+ dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
+ phba->hbqslimp.virt, phba->hbqslimp.phys);
+ dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
+ phba->slim2p.virt, phba->slim2p.phys);
+
+ /* I/O memory unmap */
+ iounmap(phba->ctrl_regs_memmap_p);
+ iounmap(phba->slim_memmap_p);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_post_status_check - Wait for SLI4 POST done and check status
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to wait for SLI4 device Power On Self Test (POST)
+ * done and check status.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+int
+lpfc_sli4_post_status_check(struct lpfc_hba *phba)
+{
+ struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg, scratchpad;
+ uint32_t onlnreg0, onlnreg1;
+ int i, port_error = -ENODEV;
+
+ if (!phba->sli4_hba.STAregaddr)
+ return -ENODEV;
+
+ /* With uncoverable error, log the error message and return error */
+ onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+ onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+ if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+ uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
+ uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
+ if (uerrlo_reg.word0 || uerrhi_reg.word0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1422 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "online0_reg=0x%x, online1_reg=0x%x\n",
+ uerrlo_reg.word0, uerrhi_reg.word0,
+ onlnreg0, onlnreg1);
+ }
+ return -ENODEV;
+ }
+
+ /* Wait up to 30 seconds for the SLI Port POST done and ready */
+ for (i = 0; i < 3000; i++) {
+ sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
+ /* Encounter fatal POST error, break out */
+ if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+ port_error = -ENODEV;
+ break;
+ }
+ if (LPFC_POST_STAGE_ARMFW_READY ==
+ bf_get(lpfc_hst_state_port_status, &sta_reg)) {
+ port_error = 0;
+ break;
+ }
+ msleep(10);
+ }
+
+ if (port_error)
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1408 Failure HBA POST Status: sta_reg=0x%x, "
+ "perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
+ "dl=x%x, pstatus=x%x\n", sta_reg.word0,
+ bf_get(lpfc_hst_state_perr, &sta_reg),
+ bf_get(lpfc_hst_state_sfi, &sta_reg),
+ bf_get(lpfc_hst_state_nip, &sta_reg),
+ bf_get(lpfc_hst_state_ipc, &sta_reg),
+ bf_get(lpfc_hst_state_xrom, &sta_reg),
+ bf_get(lpfc_hst_state_dl, &sta_reg),
+ bf_get(lpfc_hst_state_port_status, &sta_reg));
+
+ /* Log device information */
+ scratchpad.word0 = readl(phba->sli4_hba.SCRATCHPADregaddr);
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
+ "FeatureL1=0x%x, FeatureL2=0x%x\n",
+ bf_get(lpfc_scratchpad_chiptype, &scratchpad),
+ bf_get(lpfc_scratchpad_slirev, &scratchpad),
+ bf_get(lpfc_scratchpad_featurelevel1, &scratchpad),
+ bf_get(lpfc_scratchpad_featurelevel2, &scratchpad));
+
+ return port_error;
+}
+
+/**
+ * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR0 PCI config space register
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
+{
+ phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UERR_STATUS_LO;
+ phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_UERR_STATUS_HI;
+ phba->sli4_hba.ONLINE0regaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_ONLINE0;
+ phba->sli4_hba.ONLINE1regaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_ONLINE1;
+ phba->sli4_hba.SCRATCHPADregaddr = phba->sli4_hba.conf_regs_memmap_p +
+ LPFC_SCRATCHPAD;
+}
+
+/**
+ * lpfc_sli4_bar1_register_memmap - Set up SLI4 BAR1 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up SLI4 BAR1 control status register (CSR)
+ * memory map.
+ **/
+static void
+lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
+{
+
+ phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_STATE;
+ phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISR0;
+ phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_IMR0;
+ phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+ LPFC_HST_ISCR0;
+ return;
+}
+
+/**
+ * lpfc_sli4_bar2_register_memmap - Set up SLI4 BAR2 register memory map.
+ * @phba: pointer to lpfc hba data structure.
+ * @vf: virtual function number
+ *
+ * This routine is invoked to set up SLI4 BAR2 doorbell register memory map
+ * based on the given viftual function number, @vf.
+ *
+ * Return 0 if successful, otherwise -ENODEV.
+ **/
+static int
+lpfc_sli4_bar2_register_memmap(struct lpfc_hba *phba, uint32_t vf)
+{
+ if (vf > LPFC_VIR_FUNC_MAX)
+ return -ENODEV;
+
+ phba->sli4_hba.RQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_RQ_DOORBELL);
+ phba->sli4_hba.WQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_WQ_DOORBELL);
+ phba->sli4_hba.EQCQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_EQCQ_DOORBELL);
+ phba->sli4_hba.MQDBregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_MQ_DOORBELL);
+ phba->sli4_hba.BMBXregaddr = (phba->sli4_hba.drbl_regs_memmap_p +
+ vf * LPFC_VFR_PAGE_SIZE + LPFC_BMBX);
+ return 0;
+}
+
+/**
+ * lpfc_create_bootstrap_mbox - Create the bootstrap mailbox
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to create the bootstrap mailbox
+ * region consistent with the SLI-4 interface spec. This
+ * routine allocates all memory necessary to communicate
+ * mailbox commands to the port and sets up all alignment
+ * needs. No locks are expected to be held when calling
+ * this routine.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_create_bootstrap_mbox(struct lpfc_hba *phba)
+{
+ uint32_t bmbx_size;
+ struct lpfc_dmabuf *dmabuf;
+ struct dma_address *dma_address;
+ uint32_t pa_addr;
+ uint64_t phys_addr;
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ /*
+ * The bootstrap mailbox region is comprised of 2 parts
+ * plus an alignment restriction of 16 bytes.
+ */
+ bmbx_size = sizeof(struct lpfc_bmbx_create) + (LPFC_ALIGN_16_BYTE - 1);
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ bmbx_size,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ return -ENOMEM;
+ }
+ memset(dmabuf->virt, 0, bmbx_size);
+
+ /*
+ * Initialize the bootstrap mailbox pointers now so that the register
+ * operations are simple later. The mailbox dma address is required
+ * to be 16-byte aligned. Also align the virtual memory as each
+ * maibox is copied into the bmbx mailbox region before issuing the
+ * command to the port.
+ */
+ phba->sli4_hba.bmbx.dmabuf = dmabuf;
+ phba->sli4_hba.bmbx.bmbx_size = bmbx_size;
+
+ phba->sli4_hba.bmbx.avirt = PTR_ALIGN(dmabuf->virt,
+ LPFC_ALIGN_16_BYTE);
+ phba->sli4_hba.bmbx.aphys = ALIGN(dmabuf->phys,
+ LPFC_ALIGN_16_BYTE);
+
+ /*
+ * Set the high and low physical addresses now. The SLI4 alignment
+ * requirement is 16 bytes and the mailbox is posted to the port
+ * as two 30-bit addresses. The other data is a bit marking whether
+ * the 30-bit address is the high or low address.
+ * Upcast bmbx aphys to 64bits so shift instruction compiles
+ * clean on 32 bit machines.
+ */
+ dma_address = &phba->sli4_hba.bmbx.dma_address;
+ phys_addr = (uint64_t)phba->sli4_hba.bmbx.aphys;
+ pa_addr = (uint32_t) ((phys_addr >> 34) & 0x3fffffff);
+ dma_address->addr_hi = (uint32_t) ((pa_addr << 2) |
+ LPFC_BMBX_BIT1_ADDR_HI);
+
+ pa_addr = (uint32_t) ((phba->sli4_hba.bmbx.aphys >> 4) & 0x3fffffff);
+ dma_address->addr_lo = (uint32_t) ((pa_addr << 2) |
+ LPFC_BMBX_BIT1_ADDR_LO);
+ return 0;
+}
+
+/**
+ * lpfc_destroy_bootstrap_mbox - Destroy all bootstrap mailbox resources
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to teardown the bootstrap mailbox
+ * region and release all host resources. This routine requires
+ * the caller to ensure all mailbox commands recovered, no
+ * additional mailbox comands are sent, and interrupts are disabled
+ * before calling this routine.
+ *
+ **/
+static void
+lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
+{
+ dma_free_coherent(&phba->pcidev->dev,
+ phba->sli4_hba.bmbx.bmbx_size,
+ phba->sli4_hba.bmbx.dmabuf->virt,
+ phba->sli4_hba.bmbx.dmabuf->phys);
+
+ kfree(phba->sli4_hba.bmbx.dmabuf);
+ memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
+}
+
+/**
+ * lpfc_sli4_read_config - Get the config parameters.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to read the configuration parameters from the HBA.
+ * The configuration parameters are used to set the base and maximum values
+ * for RPI's XRI's VPI's VFI's and FCFIs. These values also affect the resource
+ * allocation for the port.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_read_config(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *pmb;
+ struct lpfc_mbx_read_config *rd_config;
+ uint32_t rc = 0;
+
+ pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!pmb) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2011 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ lpfc_read_config(phba, pmb);
+
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2012 Mailbox failed , mbxCmd x%x "
+ "READ_CONFIG, mbxStatus x%x\n",
+ bf_get(lpfc_mqe_command, &pmb->u.mqe),
+ bf_get(lpfc_mqe_status, &pmb->u.mqe));
+ rc = -EIO;
+ } else {
+ rd_config = &pmb->u.mqe.un.rd_config;
+ phba->sli4_hba.max_cfg_param.max_xri =
+ bf_get(lpfc_mbx_rd_conf_xri_count, rd_config);
+ phba->sli4_hba.max_cfg_param.xri_base =
+ bf_get(lpfc_mbx_rd_conf_xri_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_vpi =
+ bf_get(lpfc_mbx_rd_conf_vpi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.vpi_base =
+ bf_get(lpfc_mbx_rd_conf_vpi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_rpi =
+ bf_get(lpfc_mbx_rd_conf_rpi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.rpi_base =
+ bf_get(lpfc_mbx_rd_conf_rpi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_vfi =
+ bf_get(lpfc_mbx_rd_conf_vfi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.vfi_base =
+ bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_fcfi =
+ bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config);
+ phba->sli4_hba.max_cfg_param.fcfi_base =
+ bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config);
+ phba->sli4_hba.max_cfg_param.max_eq =
+ bf_get(lpfc_mbx_rd_conf_eq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_rq =
+ bf_get(lpfc_mbx_rd_conf_rq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_wq =
+ bf_get(lpfc_mbx_rd_conf_wq_count, rd_config);
+ phba->sli4_hba.max_cfg_param.max_cq =
+ bf_get(lpfc_mbx_rd_conf_cq_count, rd_config);
+ phba->lmt = bf_get(lpfc_mbx_rd_conf_lmt, rd_config);
+ phba->sli4_hba.next_xri = phba->sli4_hba.max_cfg_param.xri_base;
+ phba->vpi_base = phba->sli4_hba.max_cfg_param.vpi_base;
+ phba->vfi_base = phba->sli4_hba.max_cfg_param.vfi_base;
+ phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base;
+ phba->max_vpi = phba->sli4_hba.max_cfg_param.max_vpi;
+ phba->max_vports = phba->max_vpi;
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2003 cfg params XRI(B:%d M:%d), "
+ "VPI(B:%d M:%d) "
+ "VFI(B:%d M:%d) "
+ "RPI(B:%d M:%d) "
+ "FCFI(B:%d M:%d)\n",
+ phba->sli4_hba.max_cfg_param.xri_base,
+ phba->sli4_hba.max_cfg_param.max_xri,
+ phba->sli4_hba.max_cfg_param.vpi_base,
+ phba->sli4_hba.max_cfg_param.max_vpi,
+ phba->sli4_hba.max_cfg_param.vfi_base,
+ phba->sli4_hba.max_cfg_param.max_vfi,
+ phba->sli4_hba.max_cfg_param.rpi_base,
+ phba->sli4_hba.max_cfg_param.max_rpi,
+ phba->sli4_hba.max_cfg_param.fcfi_base,
+ phba->sli4_hba.max_cfg_param.max_fcfi);
+ }
+ mempool_free(pmb, phba->mbox_mem_pool);
+
+ /* Reset the DFT_HBA_Q_DEPTH to the max xri */
+ if (phba->cfg_hba_queue_depth > (phba->sli4_hba.max_cfg_param.max_xri))
+ phba->cfg_hba_queue_depth =
+ phba->sli4_hba.max_cfg_param.max_xri;
+ return rc;
+}
+
+/**
+ * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to setup the host-side endian order to the
+ * HBA consistent with the SLI-4 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_setup_endian_order(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ uint32_t rc = 0;
+ uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
+ HOST_ENDIAN_HIGH_WORD1};
+
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0492 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
+ * words to contain special data values and no other data.
+ */
+ memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+ memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0493 SLI_CONFIG_SPECIAL mailbox failed with "
+ "status x%x\n",
+ rc);
+ rc = -EIO;
+ }
+
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_queue_create - Create all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate all the SLI4 queues for the FCoE HBA
+ * operation. For each SLI4 queue type, the parameters such as queue entry
+ * count (queue depth) shall be taken from the module parameter. For now,
+ * we just use some constant number as place holder.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static int
+lpfc_sli4_queue_create(struct lpfc_hba *phba)
+{
+ struct lpfc_queue *qdesc;
+ int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+ int cfg_fcp_wq_count;
+ int cfg_fcp_eq_count;
+
+ /*
+ * Sanity check for confiugred queue parameters against the run-time
+ * device parameters
+ */
+
+ /* Sanity check on FCP fast-path WQ parameters */
+ cfg_fcp_wq_count = phba->cfg_fcp_wq_count;
+ if (cfg_fcp_wq_count >
+ (phba->sli4_hba.max_cfg_param.max_wq - LPFC_SP_WQN_DEF)) {
+ cfg_fcp_wq_count = phba->sli4_hba.max_cfg_param.max_wq -
+ LPFC_SP_WQN_DEF;
+ if (cfg_fcp_wq_count < LPFC_FP_WQN_MIN) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2581 Not enough WQs (%d) from "
+ "the pci function for supporting "
+ "FCP WQs (%d)\n",
+ phba->sli4_hba.max_cfg_param.max_wq,
+ phba->cfg_fcp_wq_count);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2582 Not enough WQs (%d) from the pci "
+ "function for supporting the requested "
+ "FCP WQs (%d), the actual FCP WQs can "
+ "be supported: %d\n",
+ phba->sli4_hba.max_cfg_param.max_wq,
+ phba->cfg_fcp_wq_count, cfg_fcp_wq_count);
+ }
+ /* The actual number of FCP work queues adopted */
+ phba->cfg_fcp_wq_count = cfg_fcp_wq_count;
+
+ /* Sanity check on FCP fast-path EQ parameters */
+ cfg_fcp_eq_count = phba->cfg_fcp_eq_count;
+ if (cfg_fcp_eq_count >
+ (phba->sli4_hba.max_cfg_param.max_eq - LPFC_SP_EQN_DEF)) {
+ cfg_fcp_eq_count = phba->sli4_hba.max_cfg_param.max_eq -
+ LPFC_SP_EQN_DEF;
+ if (cfg_fcp_eq_count < LPFC_FP_EQN_MIN) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2574 Not enough EQs (%d) from the "
+ "pci function for supporting FCP "
+ "EQs (%d)\n",
+ phba->sli4_hba.max_cfg_param.max_eq,
+ phba->cfg_fcp_eq_count);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2575 Not enough EQs (%d) from the pci "
+ "function for supporting the requested "
+ "FCP EQs (%d), the actual FCP EQs can "
+ "be supported: %d\n",
+ phba->sli4_hba.max_cfg_param.max_eq,
+ phba->cfg_fcp_eq_count, cfg_fcp_eq_count);
+ }
+ /* It does not make sense to have more EQs than WQs */
+ if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2593 The number of FCP EQs (%d) is more "
+ "than the number of FCP WQs (%d), take "
+ "the number of FCP EQs same as than of "
+ "WQs (%d)\n", cfg_fcp_eq_count,
+ phba->cfg_fcp_wq_count,
+ phba->cfg_fcp_wq_count);
+ cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
+ }
+ /* The actual number of FCP event queues adopted */
+ phba->cfg_fcp_eq_count = cfg_fcp_eq_count;
+ /* The overall number of event queues used */
+ phba->sli4_hba.cfg_eqn = phba->cfg_fcp_eq_count + LPFC_SP_EQN_DEF;
+
+ /*
+ * Create Event Queues (EQs)
+ */
+
+ /* Get EQ depth from module parameter, fake the default for now */
+ phba->sli4_hba.eq_esize = LPFC_EQE_SIZE_4B;
+ phba->sli4_hba.eq_ecount = LPFC_EQE_DEF_COUNT;
+
+ /* Create slow path event queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+ phba->sli4_hba.eq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0496 Failed allocate slow-path EQ\n");
+ goto out_error;
+ }
+ phba->sli4_hba.sp_eq = qdesc;
+
+ /* Create fast-path FCP Event Queue(s) */
+ phba->sli4_hba.fp_eq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fp_eq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2576 Failed allocate memory for fast-path "
+ "EQ record array\n");
+ goto out_free_sp_eq;
+ }
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.eq_esize,
+ phba->sli4_hba.eq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0497 Failed allocate fast-path EQ\n");
+ goto out_free_fp_eq;
+ }
+ phba->sli4_hba.fp_eq[fcp_eqidx] = qdesc;
+ }
+
+ /*
+ * Create Complete Queues (CQs)
+ */
+
+ /* Get CQ depth from module parameter, fake the default for now */
+ phba->sli4_hba.cq_esize = LPFC_CQE_SIZE;
+ phba->sli4_hba.cq_ecount = LPFC_CQE_DEF_COUNT;
+
+ /* Create slow-path Mailbox Command Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0500 Failed allocate slow-path mailbox CQ\n");
+ goto out_free_fp_eq;
+ }
+ phba->sli4_hba.mbx_cq = qdesc;
+
+ /* Create slow-path ELS Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0501 Failed allocate slow-path ELS CQ\n");
+ goto out_free_mbx_cq;
+ }
+ phba->sli4_hba.els_cq = qdesc;
+
+ /* Create slow-path Unsolicited Receive Complete Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0502 Failed allocate slow-path USOL RX CQ\n");
+ goto out_free_els_cq;
+ }
+ phba->sli4_hba.rxq_cq = qdesc;
+
+ /* Create fast-path FCP Completion Queue(s), one-to-one with EQs */
+ phba->sli4_hba.fcp_cq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_eq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2577 Failed allocate memory for fast-path "
+ "CQ record array\n");
+ goto out_free_rxq_cq;
+ }
+ for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.cq_esize,
+ phba->sli4_hba.cq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0499 Failed allocate fast-path FCP "
+ "CQ (%d)\n", fcp_cqidx);
+ goto out_free_fcp_cq;
+ }
+ phba->sli4_hba.fcp_cq[fcp_cqidx] = qdesc;
+ }
+
+ /* Create Mailbox Command Queue */
+ phba->sli4_hba.mq_esize = LPFC_MQE_SIZE;
+ phba->sli4_hba.mq_ecount = LPFC_MQE_DEF_COUNT;
+
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.mq_esize,
+ phba->sli4_hba.mq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0505 Failed allocate slow-path MQ\n");
+ goto out_free_fcp_cq;
+ }
+ phba->sli4_hba.mbx_wq = qdesc;
+
+ /*
+ * Create all the Work Queues (WQs)
+ */
+ phba->sli4_hba.wq_esize = LPFC_WQE_SIZE;
+ phba->sli4_hba.wq_ecount = LPFC_WQE_DEF_COUNT;
+
+ /* Create slow-path ELS Work Queue */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+ phba->sli4_hba.wq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0504 Failed allocate slow-path ELS WQ\n");
+ goto out_free_mbx_wq;
+ }
+ phba->sli4_hba.els_wq = qdesc;
+
+ /* Create fast-path FCP Work Queue(s) */
+ phba->sli4_hba.fcp_wq = kzalloc((sizeof(struct lpfc_queue *) *
+ phba->cfg_fcp_wq_count), GFP_KERNEL);
+ if (!phba->sli4_hba.fcp_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2578 Failed allocate memory for fast-path "
+ "WQ record array\n");
+ goto out_free_els_wq;
+ }
+ for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.wq_esize,
+ phba->sli4_hba.wq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0503 Failed allocate fast-path FCP "
+ "WQ (%d)\n", fcp_wqidx);
+ goto out_free_fcp_wq;
+ }
+ phba->sli4_hba.fcp_wq[fcp_wqidx] = qdesc;
+ }
+
+ /*
+ * Create Receive Queue (RQ)
+ */
+ phba->sli4_hba.rq_esize = LPFC_RQE_SIZE;
+ phba->sli4_hba.rq_ecount = LPFC_RQE_DEF_COUNT;
+
+ /* Create Receive Queue for header */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+ phba->sli4_hba.rq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0506 Failed allocate receive HRQ\n");
+ goto out_free_fcp_wq;
+ }
+ phba->sli4_hba.hdr_rq = qdesc;
+
+ /* Create Receive Queue for data */
+ qdesc = lpfc_sli4_queue_alloc(phba, phba->sli4_hba.rq_esize,
+ phba->sli4_hba.rq_ecount);
+ if (!qdesc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0507 Failed allocate receive DRQ\n");
+ goto out_free_hdr_rq;
+ }
+ phba->sli4_hba.dat_rq = qdesc;
+
+ return 0;
+
+out_free_hdr_rq:
+ lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+ phba->sli4_hba.hdr_rq = NULL;
+out_free_fcp_wq:
+ for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_wqidx]);
+ phba->sli4_hba.fcp_wq[fcp_wqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fcp_wq);
+out_free_els_wq:
+ lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+ phba->sli4_hba.els_wq = NULL;
+out_free_mbx_wq:
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+ phba->sli4_hba.mbx_wq = NULL;
+out_free_fcp_cq:
+ for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_cqidx]);
+ phba->sli4_hba.fcp_cq[fcp_cqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fcp_cq);
+out_free_rxq_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+ phba->sli4_hba.rxq_cq = NULL;
+out_free_els_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+ phba->sli4_hba.els_cq = NULL;
+out_free_mbx_cq:
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+ phba->sli4_hba.mbx_cq = NULL;
+out_free_fp_eq:
+ for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--) {
+ lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_eqidx]);
+ phba->sli4_hba.fp_eq[fcp_eqidx] = NULL;
+ }
+ kfree(phba->sli4_hba.fp_eq);
+out_free_sp_eq:
+ lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+ phba->sli4_hba.sp_eq = NULL;
+out_error:
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_queue_destroy - Destroy all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+static void
+lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
+{
+ int fcp_qidx;
+
+ /* Release mailbox command work queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_wq);
+ phba->sli4_hba.mbx_wq = NULL;
+
+ /* Release ELS work queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.els_wq);
+ phba->sli4_hba.els_wq = NULL;
+
+ /* Release FCP work queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_wq[fcp_qidx]);
+ kfree(phba->sli4_hba.fcp_wq);
+ phba->sli4_hba.fcp_wq = NULL;
+
+ /* Release unsolicited receive queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.hdr_rq);
+ phba->sli4_hba.hdr_rq = NULL;
+ lpfc_sli4_queue_free(phba->sli4_hba.dat_rq);
+ phba->sli4_hba.dat_rq = NULL;
+
+ /* Release unsolicited receive complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.rxq_cq);
+ phba->sli4_hba.rxq_cq = NULL;
+
+ /* Release ELS complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.els_cq);
+ phba->sli4_hba.els_cq = NULL;
+
+ /* Release mailbox command complete queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.mbx_cq);
+ phba->sli4_hba.mbx_cq = NULL;
+
+ /* Release FCP response complete queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]);
+ kfree(phba->sli4_hba.fcp_cq);
+ phba->sli4_hba.fcp_cq = NULL;
+
+ /* Release fast-path event queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]);
+ kfree(phba->sli4_hba.fp_eq);
+ phba->sli4_hba.fp_eq = NULL;
+
+ /* Release slow-path event queue */
+ lpfc_sli4_queue_free(phba->sli4_hba.sp_eq);
+ phba->sli4_hba.sp_eq = NULL;
+
+ return;
+}
+
+/**
+ * lpfc_sli4_queue_setup - Set up all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up all the SLI4 queues for the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_queue_setup(struct lpfc_hba *phba)
+{
+ int rc = -ENOMEM;
+ int fcp_eqidx, fcp_cqidx, fcp_wqidx;
+ int fcp_cq_index = 0;
+
+ /*
+ * Set up Event Queues (EQs)
+ */
+
+ /* Set up slow-path event queue */
+ if (!phba->sli4_hba.sp_eq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0520 Slow-path EQ not allocated\n");
+ goto out_error;
+ }
+ rc = lpfc_eq_create(phba, phba->sli4_hba.sp_eq,
+ LPFC_SP_DEF_IMAX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0521 Failed setup of slow-path EQ: "
+ "rc = 0x%x\n", rc);
+ goto out_error;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2583 Slow-path EQ setup: queue-id=%d\n",
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up fast-path event queue */
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ if (!phba->sli4_hba.fp_eq[fcp_eqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0522 Fast-path EQ (%d) not "
+ "allocated\n", fcp_eqidx);
+ goto out_destroy_fp_eq;
+ }
+ rc = lpfc_eq_create(phba, phba->sli4_hba.fp_eq[fcp_eqidx],
+ phba->cfg_fcp_imax);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0523 Failed setup of fast-path EQ "
+ "(%d), rc = 0x%x\n", fcp_eqidx, rc);
+ goto out_destroy_fp_eq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2584 Fast-path EQ setup: "
+ "queue[%d]-id=%d\n", fcp_eqidx,
+ phba->sli4_hba.fp_eq[fcp_eqidx]->queue_id);
+ }
+
+ /*
+ * Set up Complete Queues (CQs)
+ */
+
+ /* Set up slow-path MBOX Complete Queue as the first CQ */
+ if (!phba->sli4_hba.mbx_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0528 Mailbox CQ not allocated\n");
+ goto out_destroy_fp_eq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.mbx_cq, phba->sli4_hba.sp_eq,
+ LPFC_MCQ, LPFC_MBOX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0529 Failed setup of slow-path mailbox CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fp_eq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2585 MBX CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.mbx_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up slow-path ELS Complete Queue */
+ if (!phba->sli4_hba.els_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0530 ELS CQ not allocated\n");
+ goto out_destroy_mbx_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.els_cq, phba->sli4_hba.sp_eq,
+ LPFC_WCQ, LPFC_ELS);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0531 Failed setup of slow-path ELS CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_mbx_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2586 ELS CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.els_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up slow-path Unsolicited Receive Complete Queue */
+ if (!phba->sli4_hba.rxq_cq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0532 USOL RX CQ not allocated\n");
+ goto out_destroy_els_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.rxq_cq, phba->sli4_hba.sp_eq,
+ LPFC_RCQ, LPFC_USOL);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0533 Failed setup of slow-path USOL RX CQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_els_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2587 USL CQ setup: cq-id=%d, parent eq-id=%d\n",
+ phba->sli4_hba.rxq_cq->queue_id,
+ phba->sli4_hba.sp_eq->queue_id);
+
+ /* Set up fast-path FCP Response Complete Queue */
+ for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) {
+ if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0526 Fast-path FCP CQ (%d) not "
+ "allocated\n", fcp_cqidx);
+ goto out_destroy_fcp_cq;
+ }
+ rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx],
+ phba->sli4_hba.fp_eq[fcp_cqidx],
+ LPFC_WCQ, LPFC_FCP);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0527 Failed setup of fast-path FCP "
+ "CQ (%d), rc = 0x%x\n", fcp_cqidx, rc);
+ goto out_destroy_fcp_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2588 FCP CQ setup: cq[%d]-id=%d, "
+ "parent eq[%d]-id=%d\n",
+ fcp_cqidx,
+ phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id,
+ fcp_cqidx,
+ phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id);
+ }
+
+ /*
+ * Set up all the Work Queues (WQs)
+ */
+
+ /* Set up Mailbox Command Queue */
+ if (!phba->sli4_hba.mbx_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0538 Slow-path MQ not allocated\n");
+ goto out_destroy_fcp_cq;
+ }
+ rc = lpfc_mq_create(phba, phba->sli4_hba.mbx_wq,
+ phba->sli4_hba.mbx_cq, LPFC_MBOX);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0539 Failed setup of slow-path MQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fcp_cq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2589 MBX MQ setup: wq-id=%d, parent cq-id=%d\n",
+ phba->sli4_hba.mbx_wq->queue_id,
+ phba->sli4_hba.mbx_cq->queue_id);
+
+ /* Set up slow-path ELS Work Queue */
+ if (!phba->sli4_hba.els_wq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0536 Slow-path ELS WQ not allocated\n");
+ goto out_destroy_mbx_wq;
+ }
+ rc = lpfc_wq_create(phba, phba->sli4_hba.els_wq,
+ phba->sli4_hba.els_cq, LPFC_ELS);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0537 Failed setup of slow-path ELS WQ: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_mbx_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2590 ELS WQ setup: wq-id=%d, parent cq-id=%d\n",
+ phba->sli4_hba.els_wq->queue_id,
+ phba->sli4_hba.els_cq->queue_id);
+
+ /* Set up fast-path FCP Work Queue */
+ for (fcp_wqidx = 0; fcp_wqidx < phba->cfg_fcp_wq_count; fcp_wqidx++) {
+ if (!phba->sli4_hba.fcp_wq[fcp_wqidx]) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0534 Fast-path FCP WQ (%d) not "
+ "allocated\n", fcp_wqidx);
+ goto out_destroy_fcp_wq;
+ }
+ rc = lpfc_wq_create(phba, phba->sli4_hba.fcp_wq[fcp_wqidx],
+ phba->sli4_hba.fcp_cq[fcp_cq_index],
+ LPFC_FCP);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0535 Failed setup of fast-path FCP "
+ "WQ (%d), rc = 0x%x\n", fcp_wqidx, rc);
+ goto out_destroy_fcp_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2591 FCP WQ setup: wq[%d]-id=%d, "
+ "parent cq[%d]-id=%d\n",
+ fcp_wqidx,
+ phba->sli4_hba.fcp_wq[fcp_wqidx]->queue_id,
+ fcp_cq_index,
+ phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id);
+ /* Round robin FCP Work Queue's Completion Queue assignment */
+ fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count);
+ }
+
+ /*
+ * Create Receive Queue (RQ)
+ */
+ if (!phba->sli4_hba.hdr_rq || !phba->sli4_hba.dat_rq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0540 Receive Queue not allocated\n");
+ goto out_destroy_fcp_wq;
+ }
+ rc = lpfc_rq_create(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+ phba->sli4_hba.rxq_cq, LPFC_USOL);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0541 Failed setup of Receive Queue: "
+ "rc = 0x%x\n", rc);
+ goto out_destroy_fcp_wq;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "2592 USL RQ setup: hdr-rq-id=%d, dat-rq-id=%d "
+ "parent cq-id=%d\n",
+ phba->sli4_hba.hdr_rq->queue_id,
+ phba->sli4_hba.dat_rq->queue_id,
+ phba->sli4_hba.rxq_cq->queue_id);
+ return 0;
+
+out_destroy_fcp_wq:
+ for (--fcp_wqidx; fcp_wqidx >= 0; fcp_wqidx--)
+ lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_wqidx]);
+ lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+out_destroy_mbx_wq:
+ lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+out_destroy_fcp_cq:
+ for (--fcp_cqidx; fcp_cqidx >= 0; fcp_cqidx--)
+ lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_cqidx]);
+ lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+out_destroy_els_cq:
+ lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+out_destroy_mbx_cq:
+ lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+out_destroy_fp_eq:
+ for (--fcp_eqidx; fcp_eqidx >= 0; fcp_eqidx--)
+ lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_eqidx]);
+ lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+out_error:
+ return rc;
+}
+
+/**
+ * lpfc_sli4_queue_unset - Unset all the SLI4 queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset all the SLI4 queues with the FCoE HBA
+ * operation.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+void
+lpfc_sli4_queue_unset(struct lpfc_hba *phba)
+{
+ int fcp_qidx;
+
+ /* Unset mailbox command work queue */
+ lpfc_mq_destroy(phba, phba->sli4_hba.mbx_wq);
+ /* Unset ELS work queue */
+ lpfc_wq_destroy(phba, phba->sli4_hba.els_wq);
+ /* Unset unsolicited receive queue */
+ lpfc_rq_destroy(phba, phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq);
+ /* Unset FCP work queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++)
+ lpfc_wq_destroy(phba, phba->sli4_hba.fcp_wq[fcp_qidx]);
+ /* Unset mailbox command complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.mbx_cq);
+ /* Unset ELS complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.els_cq);
+ /* Unset unsolicited receive complete queue */
+ lpfc_cq_destroy(phba, phba->sli4_hba.rxq_cq);
+ /* Unset FCP response complete queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_cq_destroy(phba, phba->sli4_hba.fcp_cq[fcp_qidx]);
+ /* Unset fast-path event queue */
+ for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++)
+ lpfc_eq_destroy(phba, phba->sli4_hba.fp_eq[fcp_qidx]);
+ /* Unset slow-path event queue */
+ lpfc_eq_destroy(phba, phba->sli4_hba.sp_eq);
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_create - Create completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to allocate and set up a pool of completion queue
+ * events. The body of the completion queue event is a completion queue entry
+ * CQE. For now, this pool is used for the interrupt service routine to queue
+ * the following HBA completion queue events for the worker thread to process:
+ * - Mailbox asynchronous events
+ * - Receive queue completion unsolicited events
+ * Later, this can be used for all the slow-path events.
+ *
+ * Return codes
+ * 0 - sucessful
+ * -ENOMEM - No availble memory
+ **/
+static int
+lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+ int i;
+
+ for (i = 0; i < (4 * phba->sli4_hba.cq_ecount); i++) {
+ cq_event = kmalloc(sizeof(struct lpfc_cq_event), GFP_KERNEL);
+ if (!cq_event)
+ goto out_pool_create_fail;
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_cqe_event_pool);
+ }
+ return 0;
+
+out_pool_create_fail:
+ lpfc_sli4_cq_event_pool_destroy(phba);
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli4_cq_event_pool_destroy - Free completion-queue event free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to free the pool of completion queue events at
+ * driver unload time. Note that, it is the responsibility of the driver
+ * cleanup routine to free all the outstanding completion-queue events
+ * allocated from this pool back into the pool before invoking this routine
+ * to destroy the pool.
+ **/
+static void
+lpfc_sli4_cq_event_pool_destroy(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event, *next_cq_event;
+
+ list_for_each_entry_safe(cq_event, next_cq_event,
+ &phba->sli4_hba.sp_cqe_event_pool, list) {
+ list_del(&cq_event->list);
+ kfree(cq_event);
+ }
+}
+
+/**
+ * __lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock free version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ * NULL otherwise.
+ **/
+struct lpfc_cq_event *
+__lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event = NULL;
+
+ list_remove_head(&phba->sli4_hba.sp_cqe_event_pool, cq_event,
+ struct lpfc_cq_event, list);
+ return cq_event;
+}
+
+/**
+ * lpfc_sli4_cq_event_alloc - Allocate a completion-queue event from free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is the lock version of the API invoked to allocate a
+ * completion-queue event from the free pool.
+ *
+ * Return: Pointer to the newly allocated completion-queue event if successful
+ * NULL otherwise.
+ **/
+struct lpfc_cq_event *
+lpfc_sli4_cq_event_alloc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ cq_event = __lpfc_sli4_cq_event_alloc(phba);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return cq_event;
+}
+
+/**
+ * __lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock free version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+__lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+ struct lpfc_cq_event *cq_event)
+{
+ list_add_tail(&cq_event->list, &phba->sli4_hba.sp_cqe_event_pool);
+}
+
+/**
+ * lpfc_sli4_cq_event_release - Release a completion-queue event to free pool
+ * @phba: pointer to lpfc hba data structure.
+ * @cq_event: pointer to the completion queue event to be freed.
+ *
+ * This routine is the lock version of the API invoked to release a
+ * completion-queue event back into the free pool.
+ **/
+void
+lpfc_sli4_cq_event_release(struct lpfc_hba *phba,
+ struct lpfc_cq_event *cq_event)
+{
+ unsigned long iflags;
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ __lpfc_sli4_cq_event_release(phba, cq_event);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_sli4_cq_event_release_all - Release all cq events to the free pool
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to free all the pending completion-queue events to the
+ * back into the free pool for device reset.
+ **/
+static void
+lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
+{
+ LIST_HEAD(cqelist);
+ struct lpfc_cq_event *cqe;
+ unsigned long iflags;
+
+ /* Retrieve all the pending WCQEs from pending WCQE lists */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ /* Pending FCP XRI abort events */
+ list_splice_init(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+ &cqelist);
+ /* Pending ELS XRI abort events */
+ list_splice_init(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+ &cqelist);
+ /* Pending asynnc events */
+ list_splice_init(&phba->sli4_hba.sp_asynce_work_queue,
+ &cqelist);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ while (!list_empty(&cqelist)) {
+ list_remove_head(&cqelist, cqe, struct lpfc_cq_event, list);
+ lpfc_sli4_cq_event_release(phba, cqe);
+ }
+}
+
+/**
+ * lpfc_pci_function_reset - Reset pci function.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to request a PCI function reset. It will destroys
+ * all resources assigned to the PCI function which originates this request.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No availble memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_pci_function_reset(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ uint32_t rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0494 Unable to allocate memory for issuing "
+ "SLI_FUNCTION_RESET mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+ LPFC_SLI4_MBX_EMBED);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0495 SLI_FUNCTION_RESET mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_send_nop_mbox_cmds - Send sli-4 nop mailbox commands
+ * @phba: pointer to lpfc hba data structure.
+ * @cnt: number of nop mailbox commands to send.
+ *
+ * This routine is invoked to send a number @cnt of NOP mailbox command and
+ * wait for each command to complete.
+ *
+ * Return: the number of NOP mailbox command completed.
+ **/
+static int
+lpfc_sli4_send_nop_mbox_cmds(struct lpfc_hba *phba, uint32_t cnt)
+{
+ LPFC_MBOXQ_t *mboxq;
+ int length, cmdsent;
+ uint32_t mbox_tmo;
+ uint32_t rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (cnt == 0) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2518 Requested to send 0 NOP mailbox cmd\n");
+ return cnt;
+ }
+
+ mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2519 Unable to allocate memory for issuing "
+ "NOP mailbox command\n");
+ return 0;
+ }
+
+ /* Set up NOP SLI4_CONFIG mailbox-ioctl command */
+ length = (sizeof(struct lpfc_mbx_nop) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_NOP, length, LPFC_SLI4_MBX_EMBED);
+
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ for (cmdsent = 0; cmdsent < cnt; cmdsent++) {
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ if (rc == MBX_TIMEOUT)
+ break;
+ /* Check return status */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+ &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2520 NOP mailbox command failed "
+ "status x%x add_status x%x mbx "
+ "status x%x\n", shdr_status,
+ shdr_add_status, rc);
+ break;
+ }
+ }
+
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+
+ return cmdsent;
+}
+
+/**
+ * lpfc_sli4_fcfi_unreg - Unregister fcfi to device
+ * @phba: pointer to lpfc hba data structure.
+ * @fcfi: fcf index.
+ *
+ * This routine is invoked to unregister a FCFI from device.
+ **/
+void
+lpfc_sli4_fcfi_unreg(struct lpfc_hba *phba, uint16_t fcfi)
+{
+ LPFC_MBOXQ_t *mbox;
+ uint32_t mbox_tmo;
+ int rc;
+ unsigned long flags;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+
+ if (!mbox)
+ return;
+
+ lpfc_unreg_fcfi(mbox, fcfi);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (rc != MBX_SUCCESS)
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2517 Unregister FCFI command failed "
+ "status %d, mbxStatus x%x\n", rc,
+ bf_get(lpfc_mqe_status, &mbox->u.mqe));
+ else {
+ spin_lock_irqsave(&phba->hbalock, flags);
+ /* Mark the FCFI is no longer registered */
+ phba->fcf.fcf_flag &=
+ ~(FCF_AVAILABLE | FCF_REGISTERED | FCF_DISCOVERED);
+ spin_unlock_irqrestore(&phba->hbalock, flags);
+ }
+}
+
+/**
+ * lpfc_sli4_pci_mem_setup - Setup SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to set up the PCI device memory space for device
+ * with SLI-4 interface spec.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+ unsigned long bar0map_len, bar1map_len, bar2map_len;
+ int error = -ENODEV;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return error;
+ else
+ pdev = phba->pcidev;
+
+ /* Set the device DMA mask size */
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)
+ return error;
+
+ /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
+ * number of bytes required by each mapping. They are actually
+ * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+ */
+ phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
+ bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
+
+ phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
+ bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+
+ phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
+ bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+
+ /* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
+ phba->sli4_hba.conf_regs_memmap_p =
+ ioremap(phba->pci_bar0_map, bar0map_len);
+ if (!phba->sli4_hba.conf_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 PCI config registers.\n");
+ goto out;
+ }
+
+ /* Map SLI4 HBA Control Register base to a kernel virtual address. */
+ phba->sli4_hba.ctrl_regs_memmap_p =
+ ioremap(phba->pci_bar1_map, bar1map_len);
+ if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 HBA control registers.\n");
+ goto out_iounmap_conf;
+ }
+
+ /* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
+ phba->sli4_hba.drbl_regs_memmap_p =
+ ioremap(phba->pci_bar2_map, bar2map_len);
+ if (!phba->sli4_hba.drbl_regs_memmap_p) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "ioremap failed for SLI4 HBA doorbell registers.\n");
+ goto out_iounmap_ctrl;
+ }
+
+ /* Set up BAR0 PCI config space register memory map */
+ lpfc_sli4_bar0_register_memmap(phba);
+
+ /* Set up BAR1 register memory map */
+ lpfc_sli4_bar1_register_memmap(phba);
+
+ /* Set up BAR2 register memory map */
+ error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+ if (error)
+ goto out_iounmap_all;
+
+ return 0;
+
+out_iounmap_all:
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+out_iounmap_ctrl:
+ iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+out_iounmap_conf:
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+out:
+ return error;
+}
+
+/**
+ * lpfc_sli4_pci_mem_unset - Unset SLI4 HBA PCI memory space.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the PCI device memory space for device
+ * with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
+{
+ struct pci_dev *pdev;
+
+ /* Obtain PCI device reference */
+ if (!phba->pcidev)
+ return;
+ else
+ pdev = phba->pcidev;
+
+ /* Free coherent DMA memory allocated */
+
+ /* Unmap I/O memory space */
+ iounmap(phba->sli4_hba.drbl_regs_memmap_p);
+ iounmap(phba->sli4_hba.ctrl_regs_memmap_p);
+ iounmap(phba->sli4_hba.conf_regs_memmap_p);
+
+ return;
+}
+
+/**
+ * lpfc_sli_enable_msix - Enable MSI-X interrupt mode on SLI-3 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-3 interface specs. The kernel function pci_enable_msix() is
+ * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
+ * invoked, enables either all or nothing, depending on the current
+ * availability of PCI vector resources. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
* later when device is unloading, the driver should always call free_irq()
* on all MSI-X vectors it has done request_irq() on before calling
* pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
@@ -2333,7 +6029,7 @@
* other values - error
**/
static int
-lpfc_enable_msix(struct lpfc_hba *phba)
+lpfc_sli_enable_msix(struct lpfc_hba *phba)
{
int rc, i;
LPFC_MBOXQ_t *pmb;
@@ -2349,20 +6045,21 @@
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 PCI enable MSI-X failed (%d)\n", rc);
goto msi_fail_out;
- } else
- for (i = 0; i < LPFC_MSIX_VECTORS; i++)
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0477 MSI-X entry[%d]: vector=x%x "
- "message=%d\n", i,
- phba->msix_entries[i].vector,
- phba->msix_entries[i].entry);
+ }
+ for (i = 0; i < LPFC_MSIX_VECTORS; i++)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0477 MSI-X entry[%d]: vector=x%x "
+ "message=%d\n", i,
+ phba->msix_entries[i].vector,
+ phba->msix_entries[i].entry);
/*
* Assign MSI-X vectors to interrupt handlers
*/
/* vector-0 is associated to slow-path handler */
- rc = request_irq(phba->msix_entries[0].vector, &lpfc_sp_intr_handler,
- IRQF_SHARED, LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ rc = request_irq(phba->msix_entries[0].vector,
+ &lpfc_sli_sp_intr_handler, IRQF_SHARED,
+ LPFC_SP_DRIVER_HANDLER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0421 MSI-X slow-path request_irq failed "
@@ -2371,8 +6068,9 @@
}
/* vector-1 is associated to fast-path handler */
- rc = request_irq(phba->msix_entries[1].vector, &lpfc_fp_intr_handler,
- IRQF_SHARED, LPFC_FP_DRIVER_HANDLER_NAME, phba);
+ rc = request_irq(phba->msix_entries[1].vector,
+ &lpfc_sli_fp_intr_handler, IRQF_SHARED,
+ LPFC_FP_DRIVER_HANDLER_NAME, phba);
if (rc) {
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
@@ -2401,7 +6099,7 @@
lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
"0351 Config MSI mailbox command failed, "
"mbxCmd x%x, mbxStatus x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus);
+ pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus);
goto mbx_fail_out;
}
@@ -2428,14 +6126,14 @@
}
/**
- * lpfc_disable_msix - Disable MSI-X interrupt mode
+ * lpfc_sli_disable_msix - Disable MSI-X interrupt mode on SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
- * MSI-X interrupt mode.
+ * MSI-X interrupt mode to device with SLI-3 interface spec.
**/
static void
-lpfc_disable_msix(struct lpfc_hba *phba)
+lpfc_sli_disable_msix(struct lpfc_hba *phba)
{
int i;
@@ -2444,23 +6142,26 @@
free_irq(phba->msix_entries[i].vector, phba);
/* Disable MSI-X */
pci_disable_msix(phba->pcidev);
+
+ return;
}
/**
- * lpfc_enable_msi - Enable MSI interrupt mode
+ * lpfc_sli_enable_msi - Enable MSI interrupt mode on SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to enable the MSI interrupt mode. The kernel
- * function pci_enable_msi() is called to enable the MSI vector. The
- * device driver is responsible for calling the request_irq() to register
- * MSI vector with a interrupt the handler, which is done in this function.
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
+ * enable the MSI vector. The device driver is responsible for calling the
+ * request_irq() to register MSI vector with a interrupt the handler, which
+ * is done in this function.
*
* Return codes
* 0 - sucessful
* other values - error
*/
static int
-lpfc_enable_msi(struct lpfc_hba *phba)
+lpfc_sli_enable_msi(struct lpfc_hba *phba)
{
int rc;
@@ -2474,7 +6175,7 @@
return rc;
}
- rc = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+ rc = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (rc) {
pci_disable_msi(phba->pcidev);
@@ -2485,17 +6186,17 @@
}
/**
- * lpfc_disable_msi - Disable MSI interrupt mode
+ * lpfc_sli_disable_msi - Disable MSI interrupt mode to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
- * This routine is invoked to disable the MSI interrupt mode. The driver
- * calls free_irq() on MSI vector it has done request_irq() on before
- * calling pci_disable_msi(). Failure to do so results in a BUG_ON() and
- * a device will be left with MSI enabled and leaks its vector.
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-3 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
*/
-
static void
-lpfc_disable_msi(struct lpfc_hba *phba)
+lpfc_sli_disable_msi(struct lpfc_hba *phba)
{
free_irq(phba->pcidev->irq, phba);
pci_disable_msi(phba->pcidev);
@@ -2503,80 +6204,33 @@
}
/**
- * lpfc_log_intr_mode - Log the active interrupt mode
- * @phba: pointer to lpfc hba data structure.
- * @intr_mode: active interrupt mode adopted.
- *
- * This routine it invoked to log the currently used active interrupt mode
- * to the device.
- */
-static void
-lpfc_log_intr_mode(struct lpfc_hba *phba, uint32_t intr_mode)
-{
- switch (intr_mode) {
- case 0:
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0470 Enable INTx interrupt mode.\n");
- break;
- case 1:
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0481 Enabled MSI interrupt mode.\n");
- break;
- case 2:
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0480 Enabled MSI-X interrupt mode.\n");
- break;
- default:
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0482 Illegal interrupt mode.\n");
- break;
- }
- return;
-}
-
-static void
-lpfc_stop_port(struct lpfc_hba *phba)
-{
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr); /* flush */
- /* Clear all pending interrupts */
- writel(0xffffffff, phba->HAregaddr);
- readl(phba->HAregaddr); /* flush */
-
- /* Reset some HBA SLI setup states */
- lpfc_stop_phba_timers(phba);
- phba->pport->work_port_events = 0;
-
- return;
-}
-
-/**
- * lpfc_enable_intr - Enable device interrupt
+ * lpfc_sli_enable_intr - Enable device interrupt to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
- * interrupt handler(s) to interrupt vector(s). Depends on the interrupt
- * mode configured to the driver, the driver will try to fallback from the
- * configured interrupt mode to an interrupt mode which is supported by the
- * platform, kernel, and device in the order of: MSI-X -> MSI -> IRQ.
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-3 interface
+ * spec. Depends on the interrupt mode configured to the driver, the driver
+ * will try to fallback from the configured interrupt mode to an interrupt
+ * mode which is supported by the platform, kernel, and device in the order
+ * of:
+ * MSI-X -> MSI -> IRQ.
*
* Return codes
* 0 - sucessful
* other values - error
**/
static uint32_t
-lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+lpfc_sli_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
{
uint32_t intr_mode = LPFC_INTR_ERROR;
int retval;
if (cfg_mode == 2) {
/* Need to issue conf_port mbox cmd before conf_msi mbox cmd */
- retval = lpfc_sli_config_port(phba, 3);
+ retval = lpfc_sli_config_port(phba, LPFC_SLI_REV3);
if (!retval) {
/* Now, try to enable MSI-X interrupt mode */
- retval = lpfc_enable_msix(phba);
+ retval = lpfc_sli_enable_msix(phba);
if (!retval) {
/* Indicate initialization to MSI-X mode */
phba->intr_type = MSIX;
@@ -2587,7 +6241,7 @@
/* Fallback to MSI if MSI-X initialization failed */
if (cfg_mode >= 1 && phba->intr_type == NONE) {
- retval = lpfc_enable_msi(phba);
+ retval = lpfc_sli_enable_msi(phba);
if (!retval) {
/* Indicate initialization to MSI mode */
phba->intr_type = MSI;
@@ -2597,7 +6251,7 @@
/* Fallback to INTx if both MSI-X/MSI initalization failed */
if (phba->intr_type == NONE) {
- retval = request_irq(phba->pcidev->irq, lpfc_intr_handler,
+ retval = request_irq(phba->pcidev->irq, lpfc_sli_intr_handler,
IRQF_SHARED, LPFC_DRIVER_NAME, phba);
if (!retval) {
/* Indicate initialization to INTx mode */
@@ -2609,22 +6263,22 @@
}
/**
- * lpfc_disable_intr - Disable device interrupt
+ * lpfc_sli_disable_intr - Disable device interrupt to SLI-3 device.
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable device interrupt and disassociate the
- * driver's interrupt handler(s) from interrupt vector(s). Depending on the
- * interrupt mode, the driver will release the interrupt vector(s) for the
- * message signaled interrupt.
+ * driver's interrupt handler(s) from interrupt vector(s) to device with
+ * SLI-3 interface spec. Depending on the interrupt mode, the driver will
+ * release the interrupt vector(s) for the message signaled interrupt.
**/
static void
-lpfc_disable_intr(struct lpfc_hba *phba)
+lpfc_sli_disable_intr(struct lpfc_hba *phba)
{
/* Disable the currently initialized interrupt mode */
if (phba->intr_type == MSIX)
- lpfc_disable_msix(phba);
+ lpfc_sli_disable_msix(phba);
else if (phba->intr_type == MSI)
- lpfc_disable_msi(phba);
+ lpfc_sli_disable_msi(phba);
else if (phba->intr_type == INTx)
free_irq(phba->pcidev->irq, phba);
@@ -2636,263 +6290,503 @@
}
/**
- * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
- * @pdev: pointer to PCI device
- * @pid: pointer to PCI device identifier
+ * lpfc_sli4_enable_msix - Enable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
*
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is presented in PCI bus, the kernel PCI subsystem looks at
- * PCI device-specific information of the device and driver to see if the
- * driver state that it can support this kind of device. If the match is
- * successful, the driver core invokes this routine. If this routine
- * determines it can claim the HBA, it does all the initialization that it
- * needs to do to handle the HBA properly.
+ * This routine is invoked to enable the MSI-X interrupt vectors to device
+ * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
+ * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
+ * enables either all or nothing, depending on the current availability of
+ * PCI vector resources. The device driver is responsible for calling the
+ * individual request_irq() to register each MSI-X vector with a interrupt
+ * handler, which is done in this function. Note that later when device is
+ * unloading, the driver should always call free_irq() on all MSI-X vectors
+ * it has done request_irq() on before calling pci_disable_msix(). Failure
+ * to do so results in a BUG_ON() and a device will be left with MSI-X
+ * enabled and leaks its vectors.
*
- * Return code
- * 0 - driver can claim the device
- * negative value - driver can not claim the device
+ * Return codes
+ * 0 - sucessful
+ * other values - error
**/
-static int __devinit
-lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+static int
+lpfc_sli4_enable_msix(struct lpfc_hba *phba)
{
- struct lpfc_vport *vport = NULL;
- struct lpfc_hba *phba;
- struct lpfc_sli *psli;
- struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
- struct Scsi_Host *shost = NULL;
- void *ptr;
- unsigned long bar0map_len, bar2map_len;
- int error = -ENODEV, retval;
- int i, hbq_count;
- uint16_t iotag;
- uint32_t cfg_mode, intr_mode;
- int bars = pci_select_bars(pdev, IORESOURCE_MEM);
- struct lpfc_adapter_event_header adapter_event;
+ int rc, index;
- if (pci_enable_device_mem(pdev))
- goto out;
- if (pci_request_selected_regions(pdev, bars, LPFC_DRIVER_NAME))
- goto out_disable_device;
+ /* Set up MSI-X multi-message vectors */
+ for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+ phba->sli4_hba.msix_entries[index].entry = index;
- phba = kzalloc(sizeof (struct lpfc_hba), GFP_KERNEL);
- if (!phba)
- goto out_release_regions;
-
- atomic_set(&phba->fast_event_count, 0);
- spin_lock_init(&phba->hbalock);
-
- /* Initialize ndlp management spinlock */
- spin_lock_init(&phba->ndlp_lock);
-
- phba->pcidev = pdev;
-
- /* Assign an unused board number */
- if ((phba->brd_no = lpfc_get_instance()) < 0)
- goto out_free_phba;
-
- INIT_LIST_HEAD(&phba->port_list);
- init_waitqueue_head(&phba->wait_4_mlo_m_q);
+ /* Configure MSI-X capability structure */
+ rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
+ phba->sli4_hba.cfg_eqn);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0484 PCI enable MSI-X failed (%d)\n", rc);
+ goto msi_fail_out;
+ }
+ /* Log MSI-X vector assignment */
+ for (index = 0; index < phba->sli4_hba.cfg_eqn; index++)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0489 MSI-X entry[%d]: vector=x%x "
+ "message=%d\n", index,
+ phba->sli4_hba.msix_entries[index].vector,
+ phba->sli4_hba.msix_entries[index].entry);
/*
- * Get all the module params for configuring this host and then
- * establish the host.
+ * Assign MSI-X vectors to interrupt handlers
*/
- lpfc_get_cfgparam(phba);
- phba->max_vpi = LPFC_MAX_VPI;
- /* Initialize timers used by driver */
- init_timer(&phba->hb_tmofunc);
- phba->hb_tmofunc.function = lpfc_hb_timeout;
- phba->hb_tmofunc.data = (unsigned long)phba;
+ /* The first vector must associated to slow-path handler for MQ */
+ rc = request_irq(phba->sli4_hba.msix_entries[0].vector,
+ &lpfc_sli4_sp_intr_handler, IRQF_SHARED,
+ LPFC_SP_DRIVER_HANDLER_NAME, phba);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0485 MSI-X slow-path request_irq failed "
+ "(%d)\n", rc);
+ goto msi_fail_out;
+ }
- psli = &phba->sli;
- init_timer(&psli->mbox_tmo);
- psli->mbox_tmo.function = lpfc_mbox_timeout;
- psli->mbox_tmo.data = (unsigned long) phba;
- init_timer(&phba->fcp_poll_timer);
- phba->fcp_poll_timer.function = lpfc_poll_timeout;
- phba->fcp_poll_timer.data = (unsigned long) phba;
- init_timer(&phba->fabric_block_timer);
- phba->fabric_block_timer.function = lpfc_fabric_block_timeout;
- phba->fabric_block_timer.data = (unsigned long) phba;
- init_timer(&phba->eratt_poll);
- phba->eratt_poll.function = lpfc_poll_eratt;
- phba->eratt_poll.data = (unsigned long) phba;
+ /* The rest of the vector(s) are associated to fast-path handler(s) */
+ for (index = 1; index < phba->sli4_hba.cfg_eqn; index++) {
+ phba->sli4_hba.fcp_eq_hdl[index - 1].idx = index - 1;
+ phba->sli4_hba.fcp_eq_hdl[index - 1].phba = phba;
+ rc = request_irq(phba->sli4_hba.msix_entries[index].vector,
+ &lpfc_sli4_fp_intr_handler, IRQF_SHARED,
+ LPFC_FP_DRIVER_HANDLER_NAME,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0486 MSI-X fast-path (%d) "
+ "request_irq failed (%d)\n", index, rc);
+ goto cfg_fail_out;
+ }
+ }
- pci_set_master(pdev);
- pci_save_state(pdev);
- pci_try_set_mwi(pdev);
+ return rc;
- if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(64)) != 0)
- if (pci_set_dma_mask(phba->pcidev, DMA_BIT_MASK(32)) != 0)
- goto out_idr_remove;
+cfg_fail_out:
+ /* free the irq already requested */
+ for (--index; index >= 1; index--)
+ free_irq(phba->sli4_hba.msix_entries[index - 1].vector,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+
+ /* free the irq already requested */
+ free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+msi_fail_out:
+ /* Unconfigure MSI-X capability structure */
+ pci_disable_msix(phba->pcidev);
+ return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msix - Disable MSI-X interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release the MSI-X vectors and then disable the
+ * MSI-X interrupt mode to device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_disable_msix(struct lpfc_hba *phba)
+{
+ int index;
+
+ /* Free up MSI-X multi-message vectors */
+ free_irq(phba->sli4_hba.msix_entries[0].vector, phba);
+
+ for (index = 1; index < phba->sli4_hba.cfg_eqn; index++)
+ free_irq(phba->sli4_hba.msix_entries[index].vector,
+ &phba->sli4_hba.fcp_eq_hdl[index - 1]);
+ /* Disable MSI-X */
+ pci_disable_msix(phba->pcidev);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_enable_msi - Enable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling
+ * the request_irq() to register MSI vector with a interrupt the handler,
+ * which is done in this function.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static int
+lpfc_sli4_enable_msi(struct lpfc_hba *phba)
+{
+ int rc, index;
+
+ rc = pci_enable_msi(phba->pcidev);
+ if (!rc)
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0487 PCI enable MSI mode success.\n");
+ else {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0488 PCI enable MSI mode failed (%d)\n", rc);
+ return rc;
+ }
+
+ rc = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (rc) {
+ pci_disable_msi(phba->pcidev);
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0490 MSI request_irq failed (%d)\n", rc);
+ }
+
+ for (index = 0; index < phba->cfg_fcp_eq_count; index++) {
+ phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+ phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+ }
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_disable_msi - Disable MSI interrupt mode to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable the MSI interrupt mode to device with
+ * SLI-4 interface spec. The driver calls free_irq() on MSI vector it has
+ * done request_irq() on before calling pci_disable_msi(). Failure to do so
+ * results in a BUG_ON() and a device will be left with MSI enabled and leaks
+ * its vector.
+ **/
+static void
+lpfc_sli4_disable_msi(struct lpfc_hba *phba)
+{
+ free_irq(phba->pcidev->irq, phba);
+ pci_disable_msi(phba->pcidev);
+ return;
+}
+
+/**
+ * lpfc_sli4_enable_intr - Enable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to enable device interrupt and associate driver's
+ * interrupt handler(s) to interrupt vector(s) to device with SLI-4
+ * interface spec. Depends on the interrupt mode configured to the driver,
+ * the driver will try to fallback from the configured interrupt mode to an
+ * interrupt mode which is supported by the platform, kernel, and device in
+ * the order of:
+ * MSI-X -> MSI -> IRQ.
+ *
+ * Return codes
+ * 0 - sucessful
+ * other values - error
+ **/
+static uint32_t
+lpfc_sli4_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
+{
+ uint32_t intr_mode = LPFC_INTR_ERROR;
+ int retval, index;
+
+ if (cfg_mode == 2) {
+ /* Preparation before conf_msi mbox cmd */
+ retval = 0;
+ if (!retval) {
+ /* Now, try to enable MSI-X interrupt mode */
+ retval = lpfc_sli4_enable_msix(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI-X mode */
+ phba->intr_type = MSIX;
+ intr_mode = 2;
+ }
+ }
+ }
+
+ /* Fallback to MSI if MSI-X initialization failed */
+ if (cfg_mode >= 1 && phba->intr_type == NONE) {
+ retval = lpfc_sli4_enable_msi(phba);
+ if (!retval) {
+ /* Indicate initialization to MSI mode */
+ phba->intr_type = MSI;
+ intr_mode = 1;
+ }
+ }
+
+ /* Fallback to INTx if both MSI-X/MSI initalization failed */
+ if (phba->intr_type == NONE) {
+ retval = request_irq(phba->pcidev->irq, lpfc_sli4_intr_handler,
+ IRQF_SHARED, LPFC_DRIVER_NAME, phba);
+ if (!retval) {
+ /* Indicate initialization to INTx mode */
+ phba->intr_type = INTx;
+ intr_mode = 0;
+ for (index = 0; index < phba->cfg_fcp_eq_count;
+ index++) {
+ phba->sli4_hba.fcp_eq_hdl[index].idx = index;
+ phba->sli4_hba.fcp_eq_hdl[index].phba = phba;
+ }
+ }
+ }
+ return intr_mode;
+}
+
+/**
+ * lpfc_sli4_disable_intr - Disable device interrupt to SLI-4 device
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to disable device interrupt and disassociate
+ * the driver's interrupt handler(s) from interrupt vector(s) to device
+ * with SLI-4 interface spec. Depending on the interrupt mode, the driver
+ * will release the interrupt vector(s) for the message signaled interrupt.
+ **/
+static void
+lpfc_sli4_disable_intr(struct lpfc_hba *phba)
+{
+ /* Disable the currently initialized interrupt mode */
+ if (phba->intr_type == MSIX)
+ lpfc_sli4_disable_msix(phba);
+ else if (phba->intr_type == MSI)
+ lpfc_sli4_disable_msi(phba);
+ else if (phba->intr_type == INTx)
+ free_irq(phba->pcidev->irq, phba);
+
+ /* Reset interrupt management states */
+ phba->intr_type = NONE;
+ phba->sli.slistat.sli_intr = 0;
+
+ return;
+}
+
+/**
+ * lpfc_unset_hba - Unset SLI3 hba device initialization
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-3 interface spec.
+ **/
+static void
+lpfc_unset_hba(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ spin_lock_irq(shost->host_lock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(shost->host_lock);
+
+ lpfc_stop_hba_timers(phba);
+
+ phba->pport->work_port_events = 0;
+
+ lpfc_sli_hba_down(phba);
+
+ lpfc_sli_brdrestart(phba);
+
+ lpfc_sli_disable_intr(phba);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_unset_hba - Unset SLI4 hba device initialization.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to unset the HBA device initialization steps to
+ * a device with SLI-4 interface spec.
+ **/
+static void
+lpfc_sli4_unset_hba(struct lpfc_hba *phba)
+{
+ struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+ spin_lock_irq(shost->host_lock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(shost->host_lock);
+
+ phba->pport->work_port_events = 0;
+
+ lpfc_sli4_hba_down(phba);
+
+ lpfc_sli4_disable_intr(phba);
+
+ return;
+}
+
+/**
+ * lpfc_sli4_hba_unset - Unset the fcoe hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI4 code path to reset the HBA's FCoE
+ * function. The caller is not required to hold any lock. This routine
+ * issues PCI function reset mailbox command to reset the FCoE function.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static void
+lpfc_sli4_hba_unset(struct lpfc_hba *phba)
+{
+ int wait_cnt = 0;
+ LPFC_MBOXQ_t *mboxq;
+
+ lpfc_stop_hba_timers(phba);
+ phba->sli4_hba.intr_enable = 0;
/*
- * Get the bus address of Bar0 and Bar2 and the number of bytes
- * required by each mapping.
+ * Gracefully wait out the potential current outstanding asynchronous
+ * mailbox command.
*/
- phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
- bar0map_len = pci_resource_len(phba->pcidev, 0);
- phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
- bar2map_len = pci_resource_len(phba->pcidev, 2);
-
- /* Map HBA SLIM to a kernel virtual address. */
- phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
- if (!phba->slim_memmap_p) {
- error = -ENODEV;
- dev_printk(KERN_ERR, &pdev->dev,
- "ioremap failed for SLIM memory.\n");
- goto out_idr_remove;
+ /* First, block any pending async mailbox command from posted */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, trying to wait it out if we can */
+ while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ msleep(10);
+ if (++wait_cnt > LPFC_ACTIVE_MBOX_WAIT_CNT)
+ break;
}
-
- /* Map HBA Control Registers to a kernel virtual address. */
- phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
- if (!phba->ctrl_regs_memmap_p) {
- error = -ENODEV;
- dev_printk(KERN_ERR, &pdev->dev,
- "ioremap failed for HBA control registers.\n");
- goto out_iounmap_slim;
- }
-
- /* Allocate memory for SLI-2 structures */
- phba->slim2p.virt = dma_alloc_coherent(&phba->pcidev->dev,
- SLI2_SLIM_SIZE,
- &phba->slim2p.phys,
- GFP_KERNEL);
- if (!phba->slim2p.virt)
- goto out_iounmap;
-
- memset(phba->slim2p.virt, 0, SLI2_SLIM_SIZE);
- phba->mbox = phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, mbx);
- phba->pcb = (phba->slim2p.virt + offsetof(struct lpfc_sli2_slim, pcb));
- phba->IOCBs = (phba->slim2p.virt +
- offsetof(struct lpfc_sli2_slim, IOCBs));
-
- phba->hbqslimp.virt = dma_alloc_coherent(&phba->pcidev->dev,
- lpfc_sli_hbq_size(),
- &phba->hbqslimp.phys,
- GFP_KERNEL);
- if (!phba->hbqslimp.virt)
- goto out_free_slim;
-
- hbq_count = lpfc_sli_hbq_count();
- ptr = phba->hbqslimp.virt;
- for (i = 0; i < hbq_count; ++i) {
- phba->hbqs[i].hbq_virt = ptr;
- INIT_LIST_HEAD(&phba->hbqs[i].hbq_buffer_list);
- ptr += (lpfc_hbq_defs[i]->entry_count *
- sizeof(struct lpfc_hbq_entry));
- }
- phba->hbqs[LPFC_ELS_HBQ].hbq_alloc_buffer = lpfc_els_hbq_alloc;
- phba->hbqs[LPFC_ELS_HBQ].hbq_free_buffer = lpfc_els_hbq_free;
-
- memset(phba->hbqslimp.virt, 0, lpfc_sli_hbq_size());
-
- INIT_LIST_HEAD(&phba->hbqbuf_in_list);
-
- /* Initialize the SLI Layer to run with lpfc HBAs. */
- lpfc_sli_setup(phba);
- lpfc_sli_queue_setup(phba);
-
- retval = lpfc_mem_alloc(phba);
- if (retval) {
- error = retval;
- goto out_free_hbqslimp;
- }
-
- /* Initialize and populate the iocb list per host. */
- INIT_LIST_HEAD(&phba->lpfc_iocb_list);
- for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
- iocbq_entry = kzalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
- if (iocbq_entry == NULL) {
- printk(KERN_ERR "%s: only allocated %d iocbs of "
- "expected %d count. Unloading driver.\n",
- __func__, i, LPFC_IOCB_LIST_CNT);
- error = -ENOMEM;
- goto out_free_iocbq;
- }
-
- iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
- if (iotag == 0) {
- kfree (iocbq_entry);
- printk(KERN_ERR "%s: failed to allocate IOTAG. "
- "Unloading driver.\n",
- __func__);
- error = -ENOMEM;
- goto out_free_iocbq;
- }
-
+ /* Forcefully release the outstanding mailbox command if timed out */
+ if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) {
spin_lock_irq(&phba->hbalock);
- list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
- phba->total_iocbq_bufs++;
+ mboxq = phba->sli.mbox_active;
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
spin_unlock_irq(&phba->hbalock);
}
- /* Initialize HBA structure */
- phba->fc_edtov = FF_DEF_EDTOV;
- phba->fc_ratov = FF_DEF_RATOV;
- phba->fc_altov = FF_DEF_ALTOV;
- phba->fc_arbtov = FF_DEF_ARBTOV;
+ /* Tear down the queues in the HBA */
+ lpfc_sli4_queue_unset(phba);
- INIT_LIST_HEAD(&phba->work_list);
- phba->work_ha_mask = (HA_ERATT | HA_MBATT | HA_LATT);
- phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
+ /* Disable PCI subsystem interrupt */
+ lpfc_sli4_disable_intr(phba);
- /* Initialize the wait queue head for the kernel thread */
- init_waitqueue_head(&phba->work_waitq);
+ /* Stop kthread signal shall trigger work_done one more time */
+ kthread_stop(phba->worker_thread);
- /* Startup the kernel thread for this host adapter. */
- phba->worker_thread = kthread_run(lpfc_do_work, phba,
- "lpfc_worker_%d", phba->brd_no);
- if (IS_ERR(phba->worker_thread)) {
- error = PTR_ERR(phba->worker_thread);
- goto out_free_iocbq;
+ /* Stop the SLI4 device port */
+ phba->pport->work_port_events = 0;
+}
+
+/**
+ * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be called to attach a device with SLI-3 interface spec
+ * to the PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it can
+ * support this kind of device. If the match is successful, the driver core
+ * invokes this routine. If this routine determines it can claim the HBA, it
+ * does all the initialization that it needs to do to handle the HBA properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s3(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_vport *vport = NULL;
+ int error;
+ uint32_t cfg_mode, intr_mode;
+
+ /* Allocate memory for HBA structure */
+ phba = lpfc_hba_alloc(pdev);
+ if (!phba)
+ return -ENOMEM;
+
+ /* Perform generic PCI device enabling operation */
+ error = lpfc_enable_pci_dev(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1401 Failed to enable pci device.\n");
+ goto out_free_phba;
}
- /* Initialize the list of scsi buffers used by driver for scsi IO. */
- spin_lock_init(&phba->scsi_buf_list_lock);
- INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
+ /* Set up SLI API function jump table for PCI-device group-0 HBAs */
+ error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_LP);
+ if (error)
+ goto out_disable_pci_dev;
- /* Initialize list of fabric iocbs */
- INIT_LIST_HEAD(&phba->fabric_iocb_list);
+ /* Set up SLI-3 specific device PCI memory space */
+ error = lpfc_sli_pci_mem_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1402 Failed to set up pci memory space.\n");
+ goto out_disable_pci_dev;
+ }
- /* Initialize list to save ELS buffers */
- INIT_LIST_HEAD(&phba->elsbuf);
+ /* Set up phase-1 common device driver resources */
+ error = lpfc_setup_driver_resource_phase1(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1403 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s3;
+ }
- vport = lpfc_create_port(phba, phba->brd_no, &phba->pcidev->dev);
- if (!vport)
- goto out_kthread_stop;
+ /* Set up SLI-3 specific device driver resources */
+ error = lpfc_sli_driver_resource_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1404 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s3;
+ }
- shost = lpfc_shost_from_vport(vport);
- phba->pport = vport;
- lpfc_debugfs_initialize(vport);
+ /* Initialize and populate the iocb list per host */
+ error = lpfc_init_iocb_list(phba, LPFC_IOCB_LIST_CNT);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1405 Failed to initialize iocb list.\n");
+ goto out_unset_driver_resource_s3;
+ }
- pci_set_drvdata(pdev, shost);
+ /* Set up common device driver resources */
+ error = lpfc_setup_driver_resource_phase2(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1406 Failed to set up driver resource.\n");
+ goto out_free_iocb_list;
+ }
- phba->MBslimaddr = phba->slim_memmap_p;
- phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
- phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
- phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
- phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+ /* Create SCSI host to the physical port */
+ error = lpfc_create_shost(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1407 Failed to create scsi host.\n");
+ goto out_unset_driver_resource;
+ }
/* Configure sysfs attributes */
- if (lpfc_alloc_sysfs_attr(vport)) {
+ vport = phba->pport;
+ error = lpfc_alloc_sysfs_attr(vport);
+ if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1476 Failed to allocate sysfs attr\n");
- error = -ENOMEM;
- goto out_destroy_port;
+ goto out_destroy_shost;
}
+ /* Now, trying to enable interrupt and bring up the device */
cfg_mode = phba->cfg_use_msi;
while (true) {
+ /* Put device to a known state before enabling interrupt */
+ lpfc_stop_port(phba);
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, cfg_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, cfg_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0426 Failed to enable interrupt.\n");
+ "0431 Failed to enable interrupt.\n");
+ error = -ENODEV;
goto out_free_sysfs_attr;
}
- /* HBA SLI setup */
+ /* SLI-3 HBA setup */
if (lpfc_sli_hba_setup(phba)) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"1477 Failed to set up hba\n");
@@ -2902,185 +6796,65 @@
/* Wait 50ms for the interrupts of previous mailbox commands */
msleep(50);
- /* Check active interrupts received */
- if (phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
+ /* Check active interrupts on message signaled interrupts */
+ if (intr_mode == 0 ||
+ phba->sli.slistat.sli_intr > LPFC_MSIX_VECTORS) {
/* Log the current active interrupt mode */
phba->intr_mode = intr_mode;
lpfc_log_intr_mode(phba, intr_mode);
break;
} else {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0451 Configure interrupt mode (%d) "
+ "0447 Configure interrupt mode (%d) "
"failed active interrupt test.\n",
intr_mode);
- if (intr_mode == 0) {
- lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
- "0479 Failed to enable "
- "interrupt.\n");
- error = -ENODEV;
- goto out_remove_device;
- }
- /* Stop HBA SLI setups */
- lpfc_stop_port(phba);
/* Disable the current interrupt mode */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Try next level of interrupt mode */
cfg_mode = --intr_mode;
}
}
- /*
- * hba setup may have changed the hba_queue_depth so we need to adjust
- * the value of can_queue.
- */
- shost->can_queue = phba->cfg_hba_queue_depth - 10;
- if (phba->sli3_options & LPFC_SLI3_BG_ENABLED) {
+ /* Perform post initialization setup */
+ lpfc_post_init_setup(phba);
- if (lpfc_prot_mask && lpfc_prot_guard) {
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "1478 Registering BlockGuard with the "
- "SCSI layer\n");
-
- scsi_host_set_prot(shost, lpfc_prot_mask);
- scsi_host_set_guard(shost, lpfc_prot_guard);
- }
- }
-
- if (!_dump_buf_data) {
- int pagecnt = 10;
- while (pagecnt) {
- spin_lock_init(&_dump_buf_lock);
- _dump_buf_data =
- (char *) __get_free_pages(GFP_KERNEL, pagecnt);
- if (_dump_buf_data) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
- "_dump_buf_data at 0x%p\n",
- (1 << pagecnt), _dump_buf_data);
- _dump_buf_data_order = pagecnt;
- memset(_dump_buf_data, 0, ((1 << PAGE_SHIFT)
- << pagecnt));
- break;
- } else {
- --pagecnt;
- }
-
- }
-
- if (!_dump_buf_data_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
- "memory for hexdump\n");
-
- } else {
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
- "\n", _dump_buf_data);
- }
-
-
- if (!_dump_buf_dif) {
- int pagecnt = 10;
- while (pagecnt) {
- _dump_buf_dif =
- (char *) __get_free_pages(GFP_KERNEL, pagecnt);
- if (_dump_buf_dif) {
- printk(KERN_ERR "BLKGRD allocated %d pages for "
- "_dump_buf_dif at 0x%p\n",
- (1 << pagecnt), _dump_buf_dif);
- _dump_buf_dif_order = pagecnt;
- memset(_dump_buf_dif, 0, ((1 << PAGE_SHIFT)
- << pagecnt));
- break;
- } else {
- --pagecnt;
- }
-
- }
-
- if (!_dump_buf_dif_order)
- printk(KERN_ERR "BLKGRD ERROR unable to allocate "
- "memory for hexdump\n");
-
- } else {
- printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
- _dump_buf_dif);
- }
-
- lpfc_host_attrib_init(shost);
-
- if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
- spin_lock_irq(shost->host_lock);
- lpfc_poll_start_timer(phba);
- spin_unlock_irq(shost->host_lock);
- }
-
- lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
- "0428 Perform SCSI scan\n");
- /* Send board arrival event to upper layer */
- adapter_event.event_type = FC_REG_ADAPTER_EVENT;
- adapter_event.subcategory = LPFC_EVENT_ARRIVAL;
- fc_host_post_vendor_event(shost, fc_get_event_number(),
- sizeof(adapter_event),
- (char *) &adapter_event,
- LPFC_NL_VENDOR_ID);
+ /* Check if there are static vports to be created. */
+ lpfc_create_static_vport(phba);
return 0;
out_remove_device:
- spin_lock_irq(shost->host_lock);
- vport->load_flag |= FC_UNLOADING;
- spin_unlock_irq(shost->host_lock);
- lpfc_stop_phba_timers(phba);
- phba->pport->work_port_events = 0;
- lpfc_disable_intr(phba);
- lpfc_sli_hba_down(phba);
- lpfc_sli_brdrestart(phba);
+ lpfc_unset_hba(phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(vport);
-out_destroy_port:
- destroy_port(vport);
-out_kthread_stop:
- kthread_stop(phba->worker_thread);
-out_free_iocbq:
- list_for_each_entry_safe(iocbq_entry, iocbq_next,
- &phba->lpfc_iocb_list, list) {
- kfree(iocbq_entry);
- phba->total_iocbq_bufs--;
- }
- lpfc_mem_free(phba);
-out_free_hbqslimp:
- dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
- phba->hbqslimp.virt, phba->hbqslimp.phys);
-out_free_slim:
- dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
- phba->slim2p.virt, phba->slim2p.phys);
-out_iounmap:
- iounmap(phba->ctrl_regs_memmap_p);
-out_iounmap_slim:
- iounmap(phba->slim_memmap_p);
-out_idr_remove:
- idr_remove(&lpfc_hba_index, phba->brd_no);
+out_destroy_shost:
+ lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+ lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+ lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s3:
+ lpfc_sli_driver_resource_unset(phba);
+out_unset_pci_mem_s3:
+ lpfc_sli_pci_mem_unset(phba);
+out_disable_pci_dev:
+ lpfc_disable_pci_dev(phba);
out_free_phba:
- kfree(phba);
-out_release_regions:
- pci_release_selected_regions(pdev, bars);
-out_disable_device:
- pci_disable_device(pdev);
-out:
- pci_set_drvdata(pdev, NULL);
- if (shost)
- scsi_host_put(shost);
+ lpfc_hba_free(phba);
return error;
}
/**
- * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
+ * lpfc_pci_remove_one_s3 - PCI func to unreg SLI-3 device from PCI subsystem.
* @pdev: pointer to PCI device
*
- * This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
- * for the HBA device to be removed from the PCI subsystem properly.
+ * This routine is to be called to disattach a device with SLI-3 interface
+ * spec from PCI subsystem. When an Emulex HBA with SLI-3 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
**/
static void __devexit
-lpfc_pci_remove_one(struct pci_dev *pdev)
+lpfc_pci_remove_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -3098,7 +6872,7 @@
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for (i = 1; i <= phba->max_vpi && vports[i] != NULL; i++)
+ for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
fc_vport_terminate(vports[i]->fc_vport);
lpfc_destroy_vport_work_array(phba, vports);
@@ -3120,7 +6894,7 @@
/* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
- lpfc_stop_phba_timers(phba);
+ lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
@@ -3128,7 +6902,7 @@
lpfc_debugfs_terminate(vport);
/* Disable interrupt */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
pci_set_drvdata(pdev, NULL);
scsi_host_put(shost);
@@ -3138,7 +6912,7 @@
* corresponding pools here.
*/
lpfc_scsi_free(phba);
- lpfc_mem_free(phba);
+ lpfc_mem_free_all(phba);
dma_free_coherent(&pdev->dev, lpfc_sli_hbq_size(),
phba->hbqslimp.virt, phba->hbqslimp.phys);
@@ -3151,36 +6925,35 @@
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
- idr_remove(&lpfc_hba_index, phba->brd_no);
-
- kfree(phba);
+ lpfc_hba_free(phba);
pci_release_selected_regions(pdev, bars);
pci_disable_device(pdev);
}
/**
- * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
+ * lpfc_pci_suspend_one_s3 - PCI func to suspend SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
* @msg: power management message
*
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it quiesces the
- * device by stopping the driver's worker thread for the device, turning off
- * device's interrupt and DMA, and bring the device offline. Note that as the
- * driver implements the minimum PM requirements to a power-aware driver's PM
- * support for suspend/resume -- all the possible PM messages (SUSPEND,
- * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
- * and the driver will fully reinitialize its device during resume() method
- * call, the driver will set device to PCI_D3hot state in PCI config space
- * instead of setting it according to the @msg provided by the PM.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When
+ * PM invokes this method, it quiesces the device by stopping the driver's
+ * worker thread for the device, turning off device's interrupt and DMA,
+ * and bring the device offline. Note that as the driver implements the
+ * minimum PM requirements to a power-aware driver's PM support for the
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver will
+ * fully reinitialize its device during resume() method call, the driver will
+ * set device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
*
* Return code
- * 0 - driver suspended the device
- * Error otherwise
+ * 0 - driver suspended the device
+ * Error otherwise
**/
static int
-lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+lpfc_pci_suspend_one_s3(struct pci_dev *pdev, pm_message_t msg)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3194,7 +6967,7 @@
kthread_stop(phba->worker_thread);
/* Disable interrupt from device */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Save device state to PCI config space */
pci_save_state(pdev);
@@ -3204,25 +6977,26 @@
}
/**
- * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
+ * lpfc_pci_resume_one_s3 - PCI func to resume SLI-3 device for power mgmnt
* @pdev: pointer to PCI device
*
- * This routine is to be registered to the kernel's PCI subsystem to support
- * system Power Management (PM). When PM invokes this method, it restores
- * the device's PCI config space state and fully reinitializes the device
- * and brings it online. Note that as the driver implements the minimum PM
- * requirements to a power-aware driver's PM for suspend/resume -- all
- * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
- * method call will be treated as SUSPEND and the driver will fully
- * reinitialize its device during resume() method call, the device will be
- * set to PCI_D0 directly in PCI config space before restoring the state.
+ * This routine is to be called from the kernel's PCI subsystem to support
+ * system Power Management (PM) to device with SLI-3 interface spec. When PM
+ * invokes this method, it restores the device's PCI config space state and
+ * fully reinitializes the device and brings it online. Note that as the
+ * driver implements the minimum PM requirements to a power-aware driver's
+ * PM for suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE,
+ * FREEZE) to the suspend() method call will be treated as SUSPEND and the
+ * driver will fully reinitialize its device during resume() method call,
+ * the device will be set to PCI_D0 directly in PCI config space before
+ * restoring the state.
*
* Return code
- * 0 - driver suspended the device
- * Error otherwise
+ * 0 - driver suspended the device
+ * Error otherwise
**/
static int
-lpfc_pci_resume_one(struct pci_dev *pdev)
+lpfc_pci_resume_one_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3250,7 +7024,7 @@
}
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0430 PM resume Failed to enable interrupt\n");
@@ -3269,23 +7043,24 @@
}
/**
- * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
+ * lpfc_io_error_detected_s3 - Method for handling SLI-3 device PCI I/O error
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
- * This routine is registered to the PCI subsystem for error handling. This
- * function is called by the PCI subsystem after a PCI bus error affecting
- * this device has been detected. When this function is invoked, it will
- * need to stop all the I/Os and interrupt(s) to the device. Once that is
- * done, it will return PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to
- * perform proper recovery as desired.
+ * This routine is called from the PCI subsystem for I/O error handling to
+ * device with SLI-3 interface spec. This function is called by the PCI
+ * subsystem after a PCI bus error affecting this device has been detected.
+ * When this function is invoked, it will need to stop all the I/Os and
+ * interrupt(s) to the device. Once that is done, it will return
+ * PCI_ERS_RESULT_NEED_RESET for the PCI subsystem to perform proper recovery
+ * as desired.
*
* Return codes
- * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
- * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
**/
-static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
+static pci_ers_result_t
+lpfc_io_error_detected_s3(struct pci_dev *pdev, pci_channel_state_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3312,30 +7087,32 @@
lpfc_sli_abort_iocb_ring(phba, pring);
/* Disable interrupt */
- lpfc_disable_intr(phba);
+ lpfc_sli_disable_intr(phba);
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
}
/**
- * lpfc_io_slot_reset - Restart a PCI device from scratch
+ * lpfc_io_slot_reset_s3 - Method for restarting PCI SLI-3 device from scratch.
* @pdev: pointer to PCI device.
*
- * This routine is registered to the PCI subsystem for error handling. This is
- * called after PCI bus has been reset to restart the PCI card from scratch,
- * as if from a cold-boot. During the PCI subsystem error recovery, after the
- * driver returns PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform
- * proper error recovery and then call this routine before calling the .resume
- * method to recover the device. This function will initialize the HBA device,
- * enable the interrupt, but it will just put the HBA to offline state without
- * passing any I/O traffic.
+ * This routine is called from the PCI subsystem for error handling to
+ * device with SLI-3 interface spec. This is called after PCI bus has been
+ * reset to restart the PCI card from scratch, as if from a cold-boot.
+ * During the PCI subsystem error recovery, after driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method
+ * to recover the device. This function will initialize the HBA device,
+ * enable the interrupt, but it will just put the HBA to offline state
+ * without passing any I/O traffic.
*
* Return codes
- * PCI_ERS_RESULT_RECOVERED - the device has been recovered
- * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
*/
-static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
+static pci_ers_result_t
+lpfc_io_slot_reset_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3354,11 +7131,11 @@
pci_set_master(pdev);
spin_lock_irq(&phba->hbalock);
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
/* Configure and enable interrupt */
- intr_mode = lpfc_enable_intr(phba, phba->intr_mode);
+ intr_mode = lpfc_sli_enable_intr(phba, phba->intr_mode);
if (intr_mode == LPFC_INTR_ERROR) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0427 Cannot re-enable interrupt after "
@@ -3378,15 +7155,17 @@
}
/**
- * lpfc_io_resume - Resume PCI I/O operation
+ * lpfc_io_resume_s3 - Method for resuming PCI I/O operation on SLI-3 device.
* @pdev: pointer to PCI device
*
- * This routine is registered to the PCI subsystem for error handling. It is
- * called when kernel error recovery tells the lpfc driver that it is ok to
- * resume normal PCI operation after PCI bus error recovery. After this call,
- * traffic can start to flow from this device again.
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-3 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
*/
-static void lpfc_io_resume(struct pci_dev *pdev)
+static void
+lpfc_io_resume_s3(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
@@ -3394,6 +7173,697 @@
lpfc_online(phba);
}
+/**
+ * lpfc_sli4_get_els_iocb_cnt - Calculate the # of ELS IOCBs to reserve
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * returns the number of ELS/CT IOCBs to reserve
+ **/
+int
+lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
+{
+ int max_xri = phba->sli4_hba.max_cfg_param.max_xri;
+
+ if (max_xri <= 100)
+ return 4;
+ else if (max_xri <= 256)
+ return 8;
+ else if (max_xri <= 512)
+ return 16;
+ else if (max_xri <= 1024)
+ return 32;
+ else
+ return 48;
+}
+
+/**
+ * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * presented on PCI bus, the kernel PCI subsystem looks at PCI device-specific
+ * information of the device and driver to see if the driver state that it
+ * can support this kind of device. If the match is successful, the driver
+ * core invokes this routine. If this routine determines it can claim the HBA,
+ * it does all the initialization that it needs to do to handle the HBA
+ * properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_vport *vport = NULL;
+ int error;
+ uint32_t cfg_mode, intr_mode;
+ int mcnt;
+
+ /* Allocate memory for HBA structure */
+ phba = lpfc_hba_alloc(pdev);
+ if (!phba)
+ return -ENOMEM;
+
+ /* Perform generic PCI device enabling operation */
+ error = lpfc_enable_pci_dev(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1409 Failed to enable pci device.\n");
+ goto out_free_phba;
+ }
+
+ /* Set up SLI API function jump table for PCI-device group-1 HBAs */
+ error = lpfc_api_table_setup(phba, LPFC_PCI_DEV_OC);
+ if (error)
+ goto out_disable_pci_dev;
+
+ /* Set up SLI-4 specific device PCI memory space */
+ error = lpfc_sli4_pci_mem_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1410 Failed to set up pci memory space.\n");
+ goto out_disable_pci_dev;
+ }
+
+ /* Set up phase-1 common device driver resources */
+ error = lpfc_setup_driver_resource_phase1(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1411 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s4;
+ }
+
+ /* Set up SLI-4 Specific device driver resources */
+ error = lpfc_sli4_driver_resource_setup(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1412 Failed to set up driver resource.\n");
+ goto out_unset_pci_mem_s4;
+ }
+
+ /* Initialize and populate the iocb list per host */
+ error = lpfc_init_iocb_list(phba,
+ phba->sli4_hba.max_cfg_param.max_xri);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1413 Failed to initialize iocb list.\n");
+ goto out_unset_driver_resource_s4;
+ }
+
+ /* Set up common device driver resources */
+ error = lpfc_setup_driver_resource_phase2(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1414 Failed to set up driver resource.\n");
+ goto out_free_iocb_list;
+ }
+
+ /* Create SCSI host to the physical port */
+ error = lpfc_create_shost(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1415 Failed to create scsi host.\n");
+ goto out_unset_driver_resource;
+ }
+
+ /* Configure sysfs attributes */
+ vport = phba->pport;
+ error = lpfc_alloc_sysfs_attr(vport);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1416 Failed to allocate sysfs attr\n");
+ goto out_destroy_shost;
+ }
+
+ /* Now, trying to enable interrupt and bring up the device */
+ cfg_mode = phba->cfg_use_msi;
+ while (true) {
+ /* Put device to a known state before enabling interrupt */
+ lpfc_stop_port(phba);
+ /* Configure and enable interrupt */
+ intr_mode = lpfc_sli4_enable_intr(phba, cfg_mode);
+ if (intr_mode == LPFC_INTR_ERROR) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0426 Failed to enable interrupt.\n");
+ error = -ENODEV;
+ goto out_free_sysfs_attr;
+ }
+ /* Set up SLI-4 HBA */
+ if (lpfc_sli4_hba_setup(phba)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1421 Failed to set up hba\n");
+ error = -ENODEV;
+ goto out_disable_intr;
+ }
+
+ /* Send NOP mbx cmds for non-INTx mode active interrupt test */
+ if (intr_mode != 0)
+ mcnt = lpfc_sli4_send_nop_mbox_cmds(phba,
+ LPFC_ACT_INTR_CNT);
+
+ /* Check active interrupts received only for MSI/MSI-X */
+ if (intr_mode == 0 ||
+ phba->sli.slistat.sli_intr >= LPFC_ACT_INTR_CNT) {
+ /* Log the current active interrupt mode */
+ phba->intr_mode = intr_mode;
+ lpfc_log_intr_mode(phba, intr_mode);
+ break;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0451 Configure interrupt mode (%d) "
+ "failed active interrupt test.\n",
+ intr_mode);
+ /* Unset the preivous SLI-4 HBA setup */
+ lpfc_sli4_unset_hba(phba);
+ /* Try next level of interrupt mode */
+ cfg_mode = --intr_mode;
+ }
+
+ /* Perform post initialization setup */
+ lpfc_post_init_setup(phba);
+
+ return 0;
+
+out_disable_intr:
+ lpfc_sli4_disable_intr(phba);
+out_free_sysfs_attr:
+ lpfc_free_sysfs_attr(vport);
+out_destroy_shost:
+ lpfc_destroy_shost(phba);
+out_unset_driver_resource:
+ lpfc_unset_driver_resource_phase2(phba);
+out_free_iocb_list:
+ lpfc_free_iocb_list(phba);
+out_unset_driver_resource_s4:
+ lpfc_sli4_driver_resource_unset(phba);
+out_unset_pci_mem_s4:
+ lpfc_sli4_pci_mem_unset(phba);
+out_disable_pci_dev:
+ lpfc_disable_pci_dev(phba);
+out_free_phba:
+ lpfc_hba_free(phba);
+ return error;
+}
+
+/**
+ * lpfc_pci_remove_one_s4 - PCI func to unreg SLI-4 device from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to device with
+ * SLI-4 interface spec. When an Emulex HBA with SLI-4 interface spec is
+ * removed from PCI bus, it performs all the necessary cleanup for the HBA
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one_s4(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_vport **vports;
+ struct lpfc_hba *phba = vport->phba;
+ int i;
+
+ /* Mark the device unloading flag */
+ spin_lock_irq(&phba->hbalock);
+ vport->load_flag |= FC_UNLOADING;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Free the HBA sysfs attributes */
+ lpfc_free_sysfs_attr(vport);
+
+ /* Release all the vports against this physical port */
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 1; i <= phba->max_vports && vports[i] != NULL; i++)
+ fc_vport_terminate(vports[i]->fc_vport);
+ lpfc_destroy_vport_work_array(phba, vports);
+
+ /* Remove FC host and then SCSI host with the physical port */
+ fc_remove_host(shost);
+ scsi_remove_host(shost);
+
+ /* Perform cleanup on the physical port */
+ lpfc_cleanup(vport);
+
+ /*
+ * Bring down the SLI Layer. This step disables all interrupts,
+ * clears the rings, discards all mailbox commands, and resets
+ * the HBA FCoE function.
+ */
+ lpfc_debugfs_terminate(vport);
+ lpfc_sli4_hba_unset(phba);
+
+ spin_lock_irq(&phba->hbalock);
+ list_del_init(&vport->listentry);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Call scsi_free before lpfc_sli4_driver_resource_unset since scsi
+ * buffers are released to their corresponding pools here.
+ */
+ lpfc_scsi_free(phba);
+ lpfc_sli4_driver_resource_unset(phba);
+
+ /* Unmap adapter Control and Doorbell registers */
+ lpfc_sli4_pci_mem_unset(phba);
+
+ /* Release PCI resources and disable device's PCI function */
+ scsi_host_put(shost);
+ lpfc_disable_pci_dev(phba);
+
+ /* Finally, free the driver's device data structure */
+ lpfc_hba_free(phba);
+
+ return;
+}
+
+/**
+ * lpfc_pci_suspend_one_s4 - PCI func to suspend SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spec. When PM invokes
+ * this method, it quiesces the device by stopping the driver's worker
+ * thread for the device, turning off device's interrupt and DMA, and bring
+ * the device offline. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM support for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the driver will set
+ * device to PCI_D3hot state in PCI config space instead of setting it
+ * according to the @msg provided by the PM.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one_s4(struct pci_dev *pdev, pm_message_t msg)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0298 PCI device Power Management suspend.\n");
+
+ /* Bring down the device */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ kthread_stop(phba->worker_thread);
+
+ /* Disable interrupt from device */
+ lpfc_sli4_disable_intr(phba);
+
+ /* Save device state to PCI config space */
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+/**
+ * lpfc_pci_resume_one_s4 - PCI func to resume SLI-4 device for power mgmnt
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the kernel's PCI subsystem to support system
+ * Power Management (PM) to device with SLI-4 interface spac. When PM invokes
+ * this method, it restores the device's PCI config space state and fully
+ * reinitializes the device and brings it online. Note that as the driver
+ * implements the minimum PM requirements to a power-aware driver's PM for
+ * suspend/resume -- all the possible PM messages (SUSPEND, HIBERNATE, FREEZE)
+ * to the suspend() method call will be treated as SUSPEND and the driver
+ * will fully reinitialize its device during resume() method call, the device
+ * will be set to PCI_D0 directly in PCI config space before restoring the
+ * state.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_resume_one_s4(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ uint32_t intr_mode;
+ int error;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0292 PCI device Power Management resume.\n");
+
+ /* Restore device state from PCI config space */
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ if (pdev->is_busmaster)
+ pci_set_master(pdev);
+
+ /* Startup the kernel thread for this host adapter. */
+ phba->worker_thread = kthread_run(lpfc_do_work, phba,
+ "lpfc_worker_%d", phba->brd_no);
+ if (IS_ERR(phba->worker_thread)) {
+ error = PTR_ERR(phba->worker_thread);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0293 PM resume failed to start worker "
+ "thread: error=x%x.\n", error);
+ return error;
+ }
+
+ /* Configure and enable interrupt */
+ intr_mode = lpfc_sli4_enable_intr(phba, phba->intr_mode);
+ if (intr_mode == LPFC_INTR_ERROR) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0294 PM resume Failed to enable interrupt\n");
+ return -EIO;
+ } else
+ phba->intr_mode = intr_mode;
+
+ /* Restart HBA and bring it online */
+ lpfc_sli_brdrestart(phba);
+ lpfc_online(phba);
+
+ /* Log the current active interrupt mode */
+ lpfc_log_intr_mode(phba, phba->intr_mode);
+
+ return 0;
+}
+
+/**
+ * lpfc_io_error_detected_s4 - Method for handling PCI I/O error to SLI-4 device
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. This function is called by the PCI subsystem
+ * after a PCI bus error affecting this device has been detected. When this
+ * function is invoked, it will need to stop all the I/Os and interrupt(s)
+ * to the device. Once that is done, it will return PCI_ERS_RESULT_NEED_RESET
+ * for the PCI subsystem to perform proper recovery as desired.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected_s4(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * lpfc_io_slot_reset_s4 - Method for restart PCI SLI-4 device from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called after PCI bus has been reset to
+ * restart the PCI card from scratch, as if from a cold-boot. During the
+ * PCI subsystem error recovery, after the driver returns
+ * PCI_ERS_RESULT_NEED_RESET, the PCI subsystem will perform proper error
+ * recovery and then call this routine before calling the .resume method to
+ * recover the device. This function will initialize the HBA device, enable
+ * the interrupt, but it will just put the HBA to offline state without
+ * passing any I/O traffic.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ */
+static pci_ers_result_t
+lpfc_io_slot_reset_s4(struct pci_dev *pdev)
+{
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * lpfc_io_resume_s4 - Method for resuming PCI I/O operation to SLI-4 device
+ * @pdev: pointer to PCI device
+ *
+ * This routine is called from the PCI subsystem for error handling to device
+ * with SLI-4 interface spec. It is called when kernel error recovery tells
+ * the lpfc driver that it is ok to resume normal PCI operation after PCI bus
+ * error recovery. After this call, traffic can start to flow from this device
+ * again.
+ **/
+static void
+lpfc_io_resume_s4(struct pci_dev *pdev)
+{
+ return;
+}
+
+/**
+ * lpfc_pci_probe_one - lpfc PCI probe func to reg dev to PCI subsystem
+ * @pdev: pointer to PCI device
+ * @pid: pointer to PCI device identifier
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA device is presented on PCI bus, the kernel PCI subsystem looks
+ * at PCI device-specific information of the device and driver to see if the
+ * driver state that it can support this kind of device. If the match is
+ * successful, the driver core invokes this routine. This routine dispatches
+ * the action to the proper SLI-3 or SLI-4 device probing routine, which will
+ * do all the initialization that it needs to do to handle the HBA device
+ * properly.
+ *
+ * Return code
+ * 0 - driver can claim the device
+ * negative value - driver can not claim the device
+ **/
+static int __devinit
+lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ int rc;
+ uint16_t dev_id;
+
+ if (pci_read_config_word(pdev, PCI_DEVICE_ID, &dev_id))
+ return -ENODEV;
+
+ switch (dev_id) {
+ case PCI_DEVICE_ID_TIGERSHARK:
+ case PCI_DEVICE_ID_TIGERSHARK_S:
+ rc = lpfc_pci_probe_one_s4(pdev, pid);
+ break;
+ default:
+ rc = lpfc_pci_probe_one_s3(pdev, pid);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_pci_remove_one - lpfc PCI func to unreg dev from PCI subsystem
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem. When an
+ * Emulex HBA is removed from PCI bus, the driver core invokes this routine.
+ * This routine dispatches the action to the proper SLI-3 or SLI-4 device
+ * remove routine, which will perform all the necessary cleanup for the
+ * device to be removed from the PCI subsystem properly.
+ **/
+static void __devexit
+lpfc_pci_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ lpfc_pci_remove_one_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ lpfc_pci_remove_one_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1424 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return;
+}
+
+/**
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend dev for power management
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device suspend routine, which will
+ * suspend the device.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ int rc = -ENODEV;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_pci_suspend_one_s3(pdev, msg);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_pci_suspend_one_s4(pdev, msg);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1425 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_pci_resume_one - lpfc PCI func to resume dev for power management
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device resume routine, which will
+ * resume the device.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_resume_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ int rc = -ENODEV;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_pci_resume_one_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_pci_resume_one_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1426 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_error_detected - lpfc method for handling PCI I/O error
+ * @pdev: pointer to PCI device.
+ * @state: the current PCI connection state.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called by the PCI subsystem after a PCI bus error affecting
+ * this device has been detected. When this routine is invoked, it dispatches
+ * the action to the proper SLI-3 or SLI-4 device error detected handling
+ * routine, which will perform the proper error detected operation.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_NEED_RESET - need to reset before recovery
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_io_error_detected_s3(pdev, state);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_io_error_detected_s4(pdev, state);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1427 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_slot_reset - lpfc method for restart PCI dev from scratch
+ * @pdev: pointer to PCI device.
+ *
+ * This routine is registered to the PCI subsystem for error handling. This
+ * function is called after PCI bus has been reset to restart the PCI card
+ * from scratch, as if from a cold-boot. When this routine is invoked, it
+ * dispatches the action to the proper SLI-3 or SLI-4 device reset handling
+ * routine, which will perform the proper device reset.
+ *
+ * Return codes
+ * PCI_ERS_RESULT_RECOVERED - the device has been recovered
+ * PCI_ERS_RESULT_DISCONNECT - device could not be recovered
+ **/
+static pci_ers_result_t
+lpfc_io_slot_reset(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ pci_ers_result_t rc = PCI_ERS_RESULT_DISCONNECT;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ rc = lpfc_io_slot_reset_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ rc = lpfc_io_slot_reset_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1428 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_io_resume - lpfc method for resuming PCI I/O operation
+ * @pdev: pointer to PCI device
+ *
+ * This routine is registered to the PCI subsystem for error handling. It
+ * is called when kernel error recovery tells the lpfc driver that it is
+ * OK to resume normal PCI operation after PCI bus error recovery. When
+ * this routine is invoked, it dispatches the action to the proper SLI-3
+ * or SLI-4 device io_resume routine, which will resume the device operation.
+ **/
+static void
+lpfc_io_resume(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ switch (phba->pci_dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ lpfc_io_resume_s3(pdev);
+ break;
+ case LPFC_PCI_DEV_OC:
+ lpfc_io_resume_s4(pdev);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1429 Invalid PCI device group: 0x%x\n",
+ phba->pci_dev_grp);
+ break;
+ }
+ return;
+}
+
static struct pci_device_id lpfc_id_table[] = {
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
@@ -3469,6 +7939,10 @@
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PROTEUS_S,
PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK,
+ PCI_ANY_ID, PCI_ANY_ID, },
+ {PCI_VENDOR_ID_SERVERENGINE, PCI_DEVICE_ID_TIGERSHARK_S,
+ PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
@@ -3486,7 +7960,7 @@
.probe = lpfc_pci_probe_one,
.remove = __devexit_p(lpfc_pci_remove_one),
.suspend = lpfc_pci_suspend_one,
- .resume = lpfc_pci_resume_one,
+ .resume = lpfc_pci_resume_one,
.err_handler = &lpfc_err_handler,
};
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index 1aa8570..954ba57 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -18,33 +18,39 @@
* included with this package. *
*******************************************************************/
-#define LOG_ELS 0x1 /* ELS events */
-#define LOG_DISCOVERY 0x2 /* Link discovery events */
-#define LOG_MBOX 0x4 /* Mailbox events */
-#define LOG_INIT 0x8 /* Initialization events */
-#define LOG_LINK_EVENT 0x10 /* Link events */
-#define LOG_IP 0x20 /* IP traffic history */
-#define LOG_FCP 0x40 /* FCP traffic history */
-#define LOG_NODE 0x80 /* Node table events */
-#define LOG_TEMP 0x100 /* Temperature sensor events */
-#define LOG_BG 0x200 /* BlockGuard events */
-#define LOG_MISC 0x400 /* Miscellaneous events */
-#define LOG_SLI 0x800 /* SLI events */
-#define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */
-#define LOG_LIBDFC 0x2000 /* Libdfc events */
-#define LOG_VPORT 0x4000 /* NPIV events */
-#define LOG_ALL_MSG 0xffff /* LOG all messages */
+#define LOG_ELS 0x00000001 /* ELS events */
+#define LOG_DISCOVERY 0x00000002 /* Link discovery events */
+#define LOG_MBOX 0x00000004 /* Mailbox events */
+#define LOG_INIT 0x00000008 /* Initialization events */
+#define LOG_LINK_EVENT 0x00000010 /* Link events */
+#define LOG_IP 0x00000020 /* IP traffic history */
+#define LOG_FCP 0x00000040 /* FCP traffic history */
+#define LOG_NODE 0x00000080 /* Node table events */
+#define LOG_TEMP 0x00000100 /* Temperature sensor events */
+#define LOG_BG 0x00000200 /* BlockGuard events */
+#define LOG_MISC 0x00000400 /* Miscellaneous events */
+#define LOG_SLI 0x00000800 /* SLI events */
+#define LOG_FCP_ERROR 0x00001000 /* log errors, not underruns */
+#define LOG_LIBDFC 0x00002000 /* Libdfc events */
+#define LOG_VPORT 0x00004000 /* NPIV events */
+#define LOF_SECURITY 0x00008000 /* Security events */
+#define LOG_EVENT 0x00010000 /* CT,TEMP,DUMP, logging */
+#define LOG_ALL_MSG 0xffffffff /* LOG all messages */
#define lpfc_printf_vlog(vport, level, mask, fmt, arg...) \
- do { \
- { if (((mask) &(vport)->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+ { if (((mask) & (vport)->cfg_log_verbose) || (level[1] <= '3')) \
dev_printk(level, &((vport)->phba->pcidev)->dev, "%d:(%d):" \
fmt, (vport)->phba->brd_no, vport->vpi, ##arg); } \
- } while (0)
+} while (0)
#define lpfc_printf_log(phba, level, mask, fmt, arg...) \
- do { \
- { if (((mask) &(phba)->pport->cfg_log_verbose) || (level[1] <= '3')) \
+do { \
+ { uint32_t log_verbose = (phba)->pport ? \
+ (phba)->pport->cfg_log_verbose : \
+ (phba)->cfg_log_verbose; \
+ if (((mask) & log_verbose) || (level[1] <= '3')) \
dev_printk(level, &((phba)->pcidev)->dev, "%d:" \
- fmt, phba->brd_no, ##arg); } \
- } while (0)
+ fmt, phba->brd_no, ##arg); \
+ } \
+} while (0)
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 134fc7f..b9b451c 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -39,6 +41,44 @@
#include "lpfc_compat.h"
/**
+ * lpfc_dump_static_vport - Dump HBA's static vport information.
+ * @phba: pointer to lpfc hba data structure.
+ * @pmb: pointer to the driver internal queue element for mailbox command.
+ * @offset: offset for dumping vport info.
+ *
+ * The dump mailbox command provides a method for the device driver to obtain
+ * various types of information from the HBA device.
+ *
+ * This routine prepares the mailbox command for dumping list of static
+ * vports to be created.
+ **/
+void
+lpfc_dump_static_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
+ uint16_t offset)
+{
+ MAILBOX_t *mb;
+ void *ctx;
+
+ mb = &pmb->u.mb;
+ ctx = pmb->context2;
+
+ /* Setup to dump vport info region */
+ memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
+ mb->mbxCommand = MBX_DUMP_MEMORY;
+ mb->un.varDmp.cv = 1;
+ mb->un.varDmp.type = DMP_NV_PARAMS;
+ mb->un.varDmp.entry_index = offset;
+ mb->un.varDmp.region_id = DMP_REGION_VPORT;
+ mb->un.varDmp.word_cnt = DMP_RSP_SIZE/sizeof(uint32_t);
+ mb->un.varDmp.co = 0;
+ mb->un.varDmp.resp_offset = 0;
+ pmb->context2 = ctx;
+ mb->mbxOwner = OWN_HOST;
+
+ return;
+}
+
+/**
* lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
@@ -58,7 +98,7 @@
MAILBOX_t *mb;
void *ctx;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
ctx = pmb->context2;
/* Setup to dump VPD region */
@@ -90,7 +130,7 @@
MAILBOX_t *mb;
void *ctx;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
/* Save context so that we can restore after memset */
ctx = pmb->context2;
@@ -125,7 +165,7 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_READ_NV;
mb->mbxOwner = OWN_HOST;
@@ -151,7 +191,7 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_ASYNCEVT_ENABLE;
mb->un.varCfgAsyncEvent.ring = ring;
@@ -177,7 +217,7 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_HEARTBEAT;
mb->mbxOwner = OWN_HOST;
@@ -211,7 +251,7 @@
struct lpfc_sli *psli;
psli = &phba->sli;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
INIT_LIST_HEAD(&mp->list);
@@ -248,7 +288,7 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varClearLA.eventTag = phba->fc_eventTag;
@@ -275,7 +315,7 @@
lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
struct lpfc_vport *vport = phba->pport;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
/* NEW_FEATURE
@@ -321,7 +361,7 @@
int
lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint32_t attentionConditions[2];
/* Sanity check */
@@ -405,7 +445,7 @@
struct lpfc_sli *psli;
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
psli = &phba->sli;
@@ -492,7 +532,7 @@
struct lpfc_sli *psli;
psli = &phba->sli;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxOwner = OWN_HOST;
@@ -515,7 +555,7 @@
mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm);
mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys);
mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys);
- mb->un.varRdSparm.vpi = vpi;
+ mb->un.varRdSparm.vpi = vpi + phba->vpi_base;
/* save address for completion */
pmb->context1 = mp;
@@ -544,10 +584,12 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varUnregDID.did = did;
+ if (vpi != 0xffff)
+ vpi += phba->vpi_base;
mb->un.varUnregDID.vpi = vpi;
mb->mbxCommand = MBX_UNREG_D_ID;
@@ -573,7 +615,7 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_READ_CONFIG;
@@ -598,7 +640,7 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->mbxCommand = MBX_READ_LNK_STAT;
@@ -607,7 +649,7 @@
}
/**
- * lpfc_reg_login - Prepare a mailbox command for registering remote login
+ * lpfc_reg_rpi - Prepare a mailbox command for registering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
@@ -631,17 +673,23 @@
* 1 - DMA memory allocation failed
**/
int
-lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
+lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint8_t *sparam;
struct lpfc_dmabuf *mp;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varRegLogin.rpi = 0;
- mb->un.varRegLogin.vpi = vpi;
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba);
+ if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR)
+ return 1;
+ }
+
+ mb->un.varRegLogin.vpi = vpi + phba->vpi_base;
mb->un.varRegLogin.did = did;
mb->un.varWords[30] = flag; /* Set flag to issue action on cmpl */
@@ -697,15 +745,16 @@
{
MAILBOX_t *mb;
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varUnregLogin.rpi = (uint16_t) rpi;
mb->un.varUnregLogin.rsvd1 = 0;
- mb->un.varUnregLogin.vpi = vpi;
+ mb->un.varUnregLogin.vpi = vpi + phba->vpi_base;
mb->mbxCommand = MBX_UNREG_LOGIN;
mb->mbxOwner = OWN_HOST;
+
return;
}
@@ -725,15 +774,15 @@
* This routine prepares the mailbox command for registering a virtual N_Port.
**/
void
-lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
- LPFC_MBOXQ_t *pmb)
+lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
- mb->un.varRegVpi.vpi = vpi;
- mb->un.varRegVpi.sid = sid;
+ mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base;
+ mb->un.varRegVpi.sid = vport->fc_myDID;
+ mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base;
mb->mbxCommand = MBX_REG_VPI;
mb->mbxOwner = OWN_HOST;
@@ -760,10 +809,10 @@
void
lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
- mb->un.varUnregVpi.vpi = vpi;
+ mb->un.varUnregVpi.vpi = vpi + phba->vpi_base;
mb->mbxCommand = MBX_UNREG_VPI;
mb->mbxOwner = OWN_HOST;
@@ -852,7 +901,7 @@
void
lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
mb->un.varRdRev.cv = 1;
mb->un.varRdRev.v3req = 1; /* Request SLI3 info */
@@ -945,7 +994,7 @@
uint32_t hbq_entry_index, LPFC_MBOXQ_t *pmb)
{
int i;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct config_hbq_var *hbqmb = &mb->un.varCfgHbq;
memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
@@ -1020,7 +1069,7 @@
lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
{
int i;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
@@ -1075,7 +1124,7 @@
lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
MAILBOX_t __iomem *mb_slim = (MAILBOX_t __iomem *) phba->MBslimaddr;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
dma_addr_t pdma_addr;
uint32_t bar_low, bar_high;
size_t offset;
@@ -1099,21 +1148,22 @@
/* If HBA supports SLI=3 ask for it */
- if (phba->sli_rev == 3 && phba->vpd.sli3Feat.cerbm) {
+ if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
if (phba->cfg_enable_bg)
mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
+ mb->un.varCfgPort.cdss = 1; /* Configure Security */
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
mb->un.varCfgPort.cinb = 1; /* Interrupt Notification Block */
mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
if (phba->max_vpi && phba->cfg_enable_npiv &&
phba->vpd.sli3Feat.cmv) {
- mb->un.varCfgPort.max_vpi = phba->max_vpi;
+ mb->un.varCfgPort.max_vpi = LPFC_MAX_VPI;
mb->un.varCfgPort.cmv = 1;
} else
mb->un.varCfgPort.max_vpi = phba->max_vpi = 0;
} else
- phba->sli_rev = 2;
+ phba->sli_rev = LPFC_SLI_REV2;
mb->un.varCfgPort.sli_mode = phba->sli_rev;
/* Now setup pcb */
@@ -1245,7 +1295,7 @@
void
lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
{
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
memset(pmb, 0, sizeof(LPFC_MBOXQ_t));
mb->mbxCommand = MBX_KILL_BOARD;
@@ -1305,29 +1355,98 @@
}
/**
+ * __lpfc_mbox_cmpl_put - Put mailbox cmd into mailbox cmd complete list
+ * @phba: pointer to lpfc hba data structure.
+ * @mbq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine put the completed mailbox command into the mailbox command
+ * complete list. This is the unlocked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
+ **/
+void
+__lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
+{
+ list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+}
+
+/**
* lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
* This routine put the completed mailbox command into the mailbox command
- * complete list. This routine is called from driver interrupt handler
- * context.The mailbox complete list is used by the driver worker thread
- * to process mailbox complete callback functions outside the driver interrupt
- * handler.
+ * complete list. This is the locked version of the routine. The mailbox
+ * complete list is used by the driver worker thread to process mailbox
+ * complete callback functions outside the driver interrupt handler.
**/
void
-lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
+lpfc_mbox_cmpl_put(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbq)
{
unsigned long iflag;
/* This function expects to be called from interrupt context */
spin_lock_irqsave(&phba->hbalock, iflag);
- list_add_tail(&mbq->list, &phba->sli.mboxq_cmpl);
+ __lpfc_mbox_cmpl_put(phba, mbq);
spin_unlock_irqrestore(&phba->hbalock, iflag);
return;
}
/**
+ * lpfc_mbox_cmd_check - Check the validality of a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the driver internal queue element for mailbox command.
+ *
+ * This routine is to check whether a mailbox command is valid to be issued.
+ * This check will be performed by both the mailbox issue API when a client
+ * is to issue a mailbox command to the mailbox transport.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_cmd_check(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ /* Mailbox command that have a completion handler must also have a
+ * vport specified.
+ */
+ if (mboxq->mbox_cmpl && mboxq->mbox_cmpl != lpfc_sli_def_mbox_cmpl &&
+ mboxq->mbox_cmpl != lpfc_sli_wake_mbox_wait) {
+ if (!mboxq->vport) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_VPORT,
+ "1814 Mbox x%x failed, no vport\n",
+ mboxq->u.mb.mbxCommand);
+ dump_stack();
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
+/**
+ * lpfc_mbox_dev_check - Check the device state for issuing a mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is to check whether the HBA device is ready for posting a
+ * mailbox command. It is used by the mailbox transport API at the time the
+ * to post a mailbox command to the device.
+ *
+ * Return 0 - pass the check, -ENODEV - fail the check
+ **/
+int
+lpfc_mbox_dev_check(struct lpfc_hba *phba)
+{
+ /* If the PCI channel is in offline state, do not issue mbox */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return -ENODEV;
+
+ /* If the HBA is in error state, do not issue mbox */
+ if (phba->link_state == LPFC_HBA_ERROR)
+ return -ENODEV;
+
+ return 0;
+}
+
+/**
* lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
* @phba: pointer to lpfc hba data structure.
* @cmd: mailbox command code.
@@ -1350,6 +1469,475 @@
case MBX_WRITE_WWN: /* 0x98 */
case MBX_LOAD_EXP_ROM: /* 0x9C */
return LPFC_MBOX_TMO_FLASH_CMD;
+ case MBX_SLI4_CONFIG: /* 0x9b */
+ return LPFC_MBOX_SLI4_CONFIG_TMO;
}
return LPFC_MBOX_TMO;
}
+
+/**
+ * lpfc_sli4_mbx_sge_set - Set a sge entry in non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ * @phyaddr: physical address for the sge
+ * @length: Length of the sge.
+ *
+ * This routine sets up an entry in the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_set(struct lpfcMboxq *mbox, uint32_t sgentry,
+ dma_addr_t phyaddr, uint32_t length)
+{
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+ nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+ &mbox->u.mqe.un.nembed_cmd;
+ nembed_sge->sge[sgentry].pa_lo = putPaddrLow(phyaddr);
+ nembed_sge->sge[sgentry].pa_hi = putPaddrHigh(phyaddr);
+ nembed_sge->sge[sgentry].length = length;
+}
+
+/**
+ * lpfc_sli4_mbx_sge_get - Get a sge entry from non-embedded mailbox command
+ * @mbox: pointer to lpfc mbox command.
+ * @sgentry: sge entry index.
+ *
+ * This routine gets an entry from the non-embedded mailbox command at the sge
+ * index location.
+ **/
+void
+lpfc_sli4_mbx_sge_get(struct lpfcMboxq *mbox, uint32_t sgentry,
+ struct lpfc_mbx_sge *sge)
+{
+ struct lpfc_mbx_nembed_cmd *nembed_sge;
+
+ nembed_sge = (struct lpfc_mbx_nembed_cmd *)
+ &mbox->u.mqe.un.nembed_cmd;
+ sge->pa_lo = nembed_sge->sge[sgentry].pa_lo;
+ sge->pa_hi = nembed_sge->sge[sgentry].pa_hi;
+ sge->length = nembed_sge->sge[sgentry].length;
+}
+
+/**
+ * lpfc_sli4_mbox_cmd_free - Free a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine frees SLI4 specific mailbox command for sending IOCTL command.
+ **/
+void
+lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_sli4_config *sli4_cfg;
+ struct lpfc_mbx_sge sge;
+ dma_addr_t phyaddr;
+ uint32_t sgecount, sgentry;
+
+ sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+ /* For embedded mbox command, just free the mbox command */
+ if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+
+ /* For non-embedded mbox command, we need to free the pages first */
+ sgecount = bf_get(lpfc_mbox_hdr_sge_cnt, &sli4_cfg->header.cfg_mhdr);
+ /* There is nothing we can do if there is no sge address array */
+ if (unlikely(!mbox->sge_array)) {
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return;
+ }
+ /* Each non-embedded DMA memory was allocated in the length of a page */
+ for (sgentry = 0; sgentry < sgecount; sgentry++) {
+ lpfc_sli4_mbx_sge_get(mbox, sgentry, &sge);
+ phyaddr = getPaddr(sge.pa_hi, sge.pa_lo);
+ dma_free_coherent(&phba->pcidev->dev, PAGE_SIZE,
+ mbox->sge_array->addr[sgentry], phyaddr);
+ }
+ /* Free the sge address array memory */
+ kfree(mbox->sge_array);
+ /* Finally, free the mailbox command itself */
+ mempool_free(mbox, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_config - Initialize the SLI4 Config Mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ * @subsystem: The sli4 config sub mailbox subsystem.
+ * @opcode: The sli4 config sub mailbox command opcode.
+ * @length: Length of the sli4 config mailbox command.
+ *
+ * This routine sets up the header fields of SLI4 specific mailbox command
+ * for sending IOCTL command.
+ *
+ * Return: the actual length of the mbox command allocated (mostly useful
+ * for none embedded mailbox command).
+ **/
+int
+lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
+ uint8_t subsystem, uint8_t opcode, uint32_t length, bool emb)
+{
+ struct lpfc_mbx_sli4_config *sli4_config;
+ union lpfc_sli4_cfg_shdr *cfg_shdr = NULL;
+ uint32_t alloc_len;
+ uint32_t resid_len;
+ uint32_t pagen, pcount;
+ void *viraddr;
+ dma_addr_t phyaddr;
+
+ /* Set up SLI4 mailbox command header fields */
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_SLI4_CONFIG);
+
+ /* Set up SLI4 ioctl command header fields */
+ sli4_config = &mbox->u.mqe.un.sli4_config;
+
+ /* Setup for the embedded mbox command */
+ if (emb) {
+ /* Set up main header fields */
+ bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
+ sli4_config->header.cfg_mhdr.payload_length =
+ LPFC_MBX_CMD_HDR_LENGTH + length;
+ /* Set up sub-header fields following main header */
+ bf_set(lpfc_mbox_hdr_opcode,
+ &sli4_config->header.cfg_shdr.request, opcode);
+ bf_set(lpfc_mbox_hdr_subsystem,
+ &sli4_config->header.cfg_shdr.request, subsystem);
+ sli4_config->header.cfg_shdr.request.request_length = length;
+ return length;
+ }
+
+ /* Setup for the none-embedded mbox command */
+ pcount = (PAGE_ALIGN(length))/PAGE_SIZE;
+ pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ?
+ LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount;
+ /* Allocate record for keeping SGE virtual addresses */
+ mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
+ GFP_KERNEL);
+ if (!mbox->sge_array)
+ return 0;
+
+ for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
+ /* The DMA memory is always allocated in the length of a
+ * page even though the last SGE might not fill up to a
+ * page, this is used as a priori size of PAGE_SIZE for
+ * the later DMA memory free.
+ */
+ viraddr = dma_alloc_coherent(&phba->pcidev->dev, PAGE_SIZE,
+ &phyaddr, GFP_KERNEL);
+ /* In case of malloc fails, proceed with whatever we have */
+ if (!viraddr)
+ break;
+ mbox->sge_array->addr[pagen] = viraddr;
+ /* Keep the first page for later sub-header construction */
+ if (pagen == 0)
+ cfg_shdr = (union lpfc_sli4_cfg_shdr *)viraddr;
+ resid_len = length - alloc_len;
+ if (resid_len > PAGE_SIZE) {
+ lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+ PAGE_SIZE);
+ alloc_len += PAGE_SIZE;
+ } else {
+ lpfc_sli4_mbx_sge_set(mbox, pagen, phyaddr,
+ resid_len);
+ alloc_len = length;
+ }
+ }
+
+ /* Set up main header fields in mailbox command */
+ sli4_config->header.cfg_mhdr.payload_length = alloc_len;
+ bf_set(lpfc_mbox_hdr_sge_cnt, &sli4_config->header.cfg_mhdr, pagen);
+
+ /* Set up sub-header fields into the first page */
+ if (pagen > 0) {
+ bf_set(lpfc_mbox_hdr_opcode, &cfg_shdr->request, opcode);
+ bf_set(lpfc_mbox_hdr_subsystem, &cfg_shdr->request, subsystem);
+ cfg_shdr->request.request_length =
+ alloc_len - sizeof(union lpfc_sli4_cfg_shdr);
+ }
+ /* The sub-header is in DMA memory, which needs endian converstion */
+ lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr,
+ sizeof(union lpfc_sli4_cfg_shdr));
+
+ return alloc_len;
+}
+
+/**
+ * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command
+ * @phba: pointer to lpfc hba data structure.
+ * @mbox: pointer to lpfc mbox command.
+ *
+ * This routine gets the opcode from a SLI4 specific mailbox command for
+ * sending IOCTL command. If the mailbox command is not MBX_SLI4_CONFIG
+ * (0x9B) or if the IOCTL sub-header is not present, opcode 0x0 shall be
+ * returned.
+ **/
+uint8_t
+lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_sli4_config *sli4_cfg;
+ union lpfc_sli4_cfg_shdr *cfg_shdr;
+
+ if (mbox->u.mb.mbxCommand != MBX_SLI4_CONFIG)
+ return 0;
+ sli4_cfg = &mbox->u.mqe.un.sli4_config;
+
+ /* For embedded mbox command, get opcode from embedded sub-header*/
+ if (bf_get(lpfc_mbox_hdr_emb, &sli4_cfg->header.cfg_mhdr)) {
+ cfg_shdr = &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+ return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+ }
+
+ /* For non-embedded mbox command, get opcode from first dma page */
+ if (unlikely(!mbox->sge_array))
+ return 0;
+ cfg_shdr = (union lpfc_sli4_cfg_shdr *)mbox->sge_array->addr[0];
+ return bf_get(lpfc_mbox_hdr_opcode, &cfg_shdr->request);
+}
+
+/**
+ * lpfc_request_features: Configure SLI4 REQUEST_FEATURES mailbox
+ * @mboxq: pointer to lpfc mbox command.
+ *
+ * This routine sets up the mailbox for an SLI4 REQUEST_FEATURES
+ * mailbox command.
+ **/
+void
+lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
+{
+ /* Set up SLI4 mailbox command header fields */
+ memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+ bf_set(lpfc_mqe_command, &mboxq->u.mqe, MBX_SLI4_REQ_FTRS);
+
+ /* Set up host requested features. */
+ bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+
+ /* Virtual fabrics and FIPs are not supported yet. */
+ bf_set(lpfc_mbx_rq_ftr_rq_ifip, &mboxq->u.mqe.un.req_ftrs, 0);
+
+ /* Enable DIF (block guard) only if configured to do so. */
+ if (phba->cfg_enable_bg)
+ bf_set(lpfc_mbx_rq_ftr_rq_dif, &mboxq->u.mqe.un.req_ftrs, 1);
+
+ /* Enable NPIV only if configured to do so. */
+ if (phba->max_vpi && phba->cfg_enable_npiv)
+ bf_set(lpfc_mbx_rq_ftr_rq_npiv, &mboxq->u.mqe.un.req_ftrs, 1);
+
+ return;
+}
+
+/**
+ * lpfc_init_vfi - Initialize the INIT_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: Vport associated with the VF.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport. INIT_VFI configures virtual fabrics identified by VFI
+ * in the context of an FCF. The driver issues this command to setup a VFI
+ * before issuing a FLOGI to login to the VSAN. The driver should also issue a
+ * REG_VFI after a successful VSAN login.
+ **/
+void
+lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
+{
+ struct lpfc_mbx_init_vfi *init_vfi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ init_vfi = &mbox->u.mqe.un.init_vfi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI);
+ bf_set(lpfc_init_vfi_vr, init_vfi, 1);
+ bf_set(lpfc_init_vfi_vt, init_vfi, 1);
+ bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
+ bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
+}
+
+/**
+ * lpfc_reg_vfi - Initialize the REG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vport: vport associated with the VF.
+ * @phys: BDE DMA bus address used to send the service parameters to the HBA.
+ *
+ * This routine initializes @mbox to all zeros and then fills in the mailbox
+ * fields from @vport, and uses @buf as a DMAable buffer to send the vport's
+ * fc service parameters to the HBA for this VFI. REG_VFI configures virtual
+ * fabrics identified by VFI in the context of an FCF.
+ **/
+void
+lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys)
+{
+ struct lpfc_mbx_reg_vfi *reg_vfi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ reg_vfi = &mbox->u.mqe.un.reg_vfi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI);
+ bf_set(lpfc_reg_vfi_vp, reg_vfi, 1);
+ bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base);
+ bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi);
+ bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base);
+ reg_vfi->bde.addrHigh = putPaddrHigh(phys);
+ reg_vfi->bde.addrLow = putPaddrLow(phys);
+ reg_vfi->bde.tus.f.bdeSize = sizeof(vport->fc_sparam);
+ reg_vfi->bde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bf_set(lpfc_reg_vfi_nport_id, reg_vfi, vport->fc_myDID);
+}
+
+/**
+ * lpfc_init_vpi - Initialize the INIT_VPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vpi: VPI to be initialized.
+ *
+ * The INIT_VPI mailbox command supports virtual N_Ports. The driver uses the
+ * command to activate a virtual N_Port. The HBA assigns a MAC address to use
+ * with the virtual N Port. The SLI Host issues this command before issuing a
+ * FDISC to connect to the Fabric. The SLI Host should issue a REG_VPI after a
+ * successful virtual NPort login.
+ **/
+void
+lpfc_init_vpi(struct lpfcMboxq *mbox, uint16_t vpi)
+{
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI);
+ bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, vpi);
+}
+
+/**
+ * lpfc_unreg_vfi - Initialize the UNREG_VFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @vfi: VFI to be unregistered.
+ *
+ * The UNREG_VFI mailbox command causes the SLI Host to put a virtual fabric
+ * (logical NPort) into the inactive state. The SLI Host must have logged out
+ * and unregistered all remote N_Ports to abort any activity on the virtual
+ * fabric. The SLI Port posts the mailbox response after marking the virtual
+ * fabric inactive.
+ **/
+void
+lpfc_unreg_vfi(struct lpfcMboxq *mbox, uint16_t vfi)
+{
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI);
+ bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, vfi);
+}
+
+/**
+ * lpfc_dump_fcoe_param - Dump config region 23 to get FCoe parameters.
+ * @phba: pointer to the hba structure containing.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * This function create a SLI4 dump mailbox command to dump FCoE
+ * parameters stored in region 23.
+ **/
+int
+lpfc_dump_fcoe_param(struct lpfc_hba *phba,
+ struct lpfcMboxq *mbox)
+{
+ struct lpfc_dmabuf *mp = NULL;
+ MAILBOX_t *mb;
+
+ memset(mbox, 0, sizeof(*mbox));
+ mb = &mbox->u.mb;
+
+ mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (mp)
+ mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+
+ if (!mp || !mp->virt) {
+ kfree(mp);
+ /* dump_fcoe_param failed to allocate memory */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
+ "2569 lpfc_dump_fcoe_param: memory"
+ " allocation failed \n");
+ return 1;
+ }
+
+ memset(mp->virt, 0, LPFC_BPL_SIZE);
+ INIT_LIST_HEAD(&mp->list);
+
+ /* save address for completion */
+ mbox->context1 = (uint8_t *) mp;
+
+ mb->mbxCommand = MBX_DUMP_MEMORY;
+ mb->un.varDmp.type = DMP_NV_PARAMS;
+ mb->un.varDmp.region_id = DMP_REGION_FCOEPARAM;
+ mb->un.varDmp.sli4_length = DMP_FCOEPARAM_RGN_SIZE;
+ mb->un.varWords[3] = putPaddrLow(mp->phys);
+ mb->un.varWords[4] = putPaddrHigh(mp->phys);
+ return 0;
+}
+
+/**
+ * lpfc_reg_fcfi - Initialize the REG_FCFI mailbox command
+ * @phba: pointer to the hba structure containing the FCF index and RQ ID.
+ * @mbox: pointer to lpfc mbox command to initialize.
+ *
+ * The REG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs). The
+ * SLI Host uses the command to activate an FCF after it has acquired FCF
+ * information via a READ_FCF mailbox command. This mailbox command also is used
+ * to indicate where received unsolicited frames from this FCF will be sent. By
+ * default this routine will set up the FCF to forward all unsolicited frames
+ * the the RQ ID passed in the @phba. This can be overridden by the caller for
+ * more complicated setups.
+ **/
+void
+lpfc_reg_fcfi(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
+{
+ struct lpfc_mbx_reg_fcfi *reg_fcfi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ reg_fcfi = &mbox->u.mqe.un.reg_fcfi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_FCFI);
+ bf_set(lpfc_reg_fcfi_rq_id0, reg_fcfi, phba->sli4_hba.hdr_rq->queue_id);
+ bf_set(lpfc_reg_fcfi_rq_id1, reg_fcfi, REG_FCF_INVALID_QID);
+ bf_set(lpfc_reg_fcfi_rq_id2, reg_fcfi, REG_FCF_INVALID_QID);
+ bf_set(lpfc_reg_fcfi_rq_id3, reg_fcfi, REG_FCF_INVALID_QID);
+ bf_set(lpfc_reg_fcfi_info_index, reg_fcfi, phba->fcf.fcf_indx);
+ /* reg_fcf addr mode is bit wise inverted value of fcf addr_mode */
+ bf_set(lpfc_reg_fcfi_mam, reg_fcfi,
+ (~phba->fcf.addr_mode) & 0x3);
+ if (phba->fcf.fcf_flag & FCF_VALID_VLAN) {
+ bf_set(lpfc_reg_fcfi_vv, reg_fcfi, 1);
+ bf_set(lpfc_reg_fcfi_vlan_tag, reg_fcfi, phba->fcf.vlan_id);
+ }
+}
+
+/**
+ * lpfc_unreg_fcfi - Initialize the UNREG_FCFI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @fcfi: FCFI to be unregistered.
+ *
+ * The UNREG_FCFI mailbox command supports Fibre Channel Forwarders (FCFs).
+ * The SLI Host uses the command to inactivate an FCFI.
+ **/
+void
+lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi)
+{
+ memset(mbox, 0, sizeof(*mbox));
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_FCFI);
+ bf_set(lpfc_unreg_fcfi, &mbox->u.mqe.un.unreg_fcfi, fcfi);
+}
+
+/**
+ * lpfc_resume_rpi - Initialize the RESUME_RPI mailbox command
+ * @mbox: pointer to lpfc mbox command to initialize.
+ * @ndlp: The nodelist structure that describes the RPI to resume.
+ *
+ * The RESUME_RPI mailbox command is used to restart I/O to an RPI after a
+ * link event.
+ **/
+void
+lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp)
+{
+ struct lpfc_mbx_resume_rpi *resume_rpi;
+
+ memset(mbox, 0, sizeof(*mbox));
+ resume_rpi = &mbox->u.mqe.un.resume_rpi;
+ bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI);
+ bf_set(lpfc_resume_rpi_rpi, resume_rpi, ndlp->nlp_rpi);
+ bf_set(lpfc_resume_rpi_vpi, resume_rpi,
+ ndlp->vport->vpi + ndlp->vport->phba->vpi_base);
+ bf_set(lpfc_resume_rpi_vfi, resume_rpi,
+ ndlp->vport->vfi + ndlp->vport->phba->vfi_base);
+}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 35a9767..e198c91 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -45,7 +47,7 @@
* @phba: HBA to allocate pools for
*
* Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
- * lpfc_mbuf_pool, lpfc_hbq_pool. Creates and allocates kmalloc-backed mempools
+ * lpfc_mbuf_pool, lpfc_hrb_pool. Creates and allocates kmalloc-backed mempools
* for LPFC_MBOXQ_t and lpfc_nodelist. Also allocates the VPI bitmask.
*
* Notes: Not interrupt-safe. Must be called with no locks held. If any
@@ -56,19 +58,30 @@
* -ENOMEM on failure (if any memory allocations fail)
**/
int
-lpfc_mem_alloc(struct lpfc_hba * phba)
+lpfc_mem_alloc(struct lpfc_hba *phba, int align)
{
struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
int longs;
int i;
- phba->lpfc_scsi_dma_buf_pool = pci_pool_create("lpfc_scsi_dma_buf_pool",
- phba->pcidev, phba->cfg_sg_dma_buf_size, 8, 0);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->lpfc_scsi_dma_buf_pool =
+ pci_pool_create("lpfc_scsi_dma_buf_pool",
+ phba->pcidev,
+ phba->cfg_sg_dma_buf_size,
+ phba->cfg_sg_dma_buf_size,
+ 0);
+ else
+ phba->lpfc_scsi_dma_buf_pool =
+ pci_pool_create("lpfc_scsi_dma_buf_pool",
+ phba->pcidev, phba->cfg_sg_dma_buf_size,
+ align, 0);
if (!phba->lpfc_scsi_dma_buf_pool)
goto fail;
phba->lpfc_mbuf_pool = pci_pool_create("lpfc_mbuf_pool", phba->pcidev,
- LPFC_BPL_SIZE, 8,0);
+ LPFC_BPL_SIZE,
+ align, 0);
if (!phba->lpfc_mbuf_pool)
goto fail_free_dma_buf_pool;
@@ -97,23 +110,31 @@
sizeof(struct lpfc_nodelist));
if (!phba->nlp_mem_pool)
goto fail_free_mbox_pool;
-
- phba->lpfc_hbq_pool = pci_pool_create("lpfc_hbq_pool",phba->pcidev,
- LPFC_BPL_SIZE, 8, 0);
- if (!phba->lpfc_hbq_pool)
+ phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
+ phba->pcidev,
+ LPFC_HDR_BUF_SIZE, align, 0);
+ if (!phba->lpfc_hrb_pool)
goto fail_free_nlp_mem_pool;
+ phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
+ phba->pcidev,
+ LPFC_DATA_BUF_SIZE, align, 0);
+ if (!phba->lpfc_drb_pool)
+ goto fail_free_hbq_pool;
/* vpi zero is reserved for the physical port so add 1 to max */
longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG;
phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL);
if (!phba->vpi_bmask)
- goto fail_free_hbq_pool;
+ goto fail_free_dbq_pool;
return 0;
+ fail_free_dbq_pool:
+ pci_pool_destroy(phba->lpfc_drb_pool);
+ phba->lpfc_drb_pool = NULL;
fail_free_hbq_pool:
- lpfc_sli_hbqbuf_free_all(phba);
- pci_pool_destroy(phba->lpfc_hbq_pool);
+ pci_pool_destroy(phba->lpfc_hrb_pool);
+ phba->lpfc_hrb_pool = NULL;
fail_free_nlp_mem_pool:
mempool_destroy(phba->nlp_mem_pool);
phba->nlp_mem_pool = NULL;
@@ -136,27 +157,73 @@
}
/**
- * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
*
- * Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
- * lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist. Also frees the VPI bitmask
+ * Description: Free the memory allocated by lpfc_mem_alloc routine. This
+ * routine is a the counterpart of lpfc_mem_alloc.
*
* Returns: None
**/
void
-lpfc_mem_free(struct lpfc_hba * phba)
+lpfc_mem_free(struct lpfc_hba *phba)
+{
+ int i;
+ struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
+
+ /* Free VPI bitmask memory */
+ kfree(phba->vpi_bmask);
+
+ /* Free HBQ pools */
+ lpfc_sli_hbqbuf_free_all(phba);
+ pci_pool_destroy(phba->lpfc_drb_pool);
+ phba->lpfc_drb_pool = NULL;
+ pci_pool_destroy(phba->lpfc_hrb_pool);
+ phba->lpfc_hrb_pool = NULL;
+
+ /* Free NLP memory pool */
+ mempool_destroy(phba->nlp_mem_pool);
+ phba->nlp_mem_pool = NULL;
+
+ /* Free mbox memory pool */
+ mempool_destroy(phba->mbox_mem_pool);
+ phba->mbox_mem_pool = NULL;
+
+ /* Free MBUF memory pool */
+ for (i = 0; i < pool->current_count; i++)
+ pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
+ pool->elements[i].phys);
+ kfree(pool->elements);
+
+ pci_pool_destroy(phba->lpfc_mbuf_pool);
+ phba->lpfc_mbuf_pool = NULL;
+
+ /* Free DMA buffer memory pool */
+ pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
+ phba->lpfc_scsi_dma_buf_pool = NULL;
+
+ return;
+}
+
+/**
+ * lpfc_mem_free_all - Frees all PCI and driver memory
+ * @phba: HBA to free memory for
+ *
+ * Description: Free memory from PCI and driver memory pools and also those
+ * used : lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool, lpfc_hrb_pool. Frees
+ * kmalloc-backed mempools for LPFC_MBOXQ_t and lpfc_nodelist. Also frees
+ * the VPI bitmask.
+ *
+ * Returns: None
+ **/
+void
+lpfc_mem_free_all(struct lpfc_hba *phba)
{
struct lpfc_sli *psli = &phba->sli;
- struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool;
LPFC_MBOXQ_t *mbox, *next_mbox;
struct lpfc_dmabuf *mp;
- int i;
- kfree(phba->vpi_bmask);
- lpfc_sli_hbqbuf_free_all(phba);
-
+ /* Free memory used in mailbox queue back to mailbox memory pool */
list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq, list) {
mp = (struct lpfc_dmabuf *) (mbox->context1);
if (mp) {
@@ -166,6 +233,7 @@
list_del(&mbox->list);
mempool_free(mbox, phba->mbox_mem_pool);
}
+ /* Free memory used in mailbox cmpl list back to mailbox memory pool */
list_for_each_entry_safe(mbox, next_mbox, &psli->mboxq_cmpl, list) {
mp = (struct lpfc_dmabuf *) (mbox->context1);
if (mp) {
@@ -175,8 +243,10 @@
list_del(&mbox->list);
mempool_free(mbox, phba->mbox_mem_pool);
}
-
+ /* Free the active mailbox command back to the mailbox memory pool */
+ spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
if (psli->mbox_active) {
mbox = psli->mbox_active;
mp = (struct lpfc_dmabuf *) (mbox->context1);
@@ -188,27 +258,14 @@
psli->mbox_active = NULL;
}
- for (i = 0; i < pool->current_count; i++)
- pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
- pool->elements[i].phys);
- kfree(pool->elements);
-
- pci_pool_destroy(phba->lpfc_hbq_pool);
- mempool_destroy(phba->nlp_mem_pool);
- mempool_destroy(phba->mbox_mem_pool);
-
- pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
- pci_pool_destroy(phba->lpfc_mbuf_pool);
-
- phba->lpfc_hbq_pool = NULL;
- phba->nlp_mem_pool = NULL;
- phba->mbox_mem_pool = NULL;
- phba->lpfc_scsi_dma_buf_pool = NULL;
- phba->lpfc_mbuf_pool = NULL;
+ /* Free and destroy all the allocated memory pools */
+ lpfc_mem_free(phba);
/* Free the iocb lookup array */
kfree(psli->iocbq_lookup);
psli->iocbq_lookup = NULL;
+
+ return;
}
/**
@@ -305,7 +362,7 @@
* lpfc_els_hbq_alloc - Allocate an HBQ buffer
* @phba: HBA to allocate HBQ buffer for
*
- * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
+ * Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hrb_pool PCI
* pool along a non-DMA-mapped container for it.
*
* Notes: Not interrupt-safe. Must be called with no locks held.
@@ -323,7 +380,7 @@
if (!hbqbp)
return NULL;
- hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hbq_pool, GFP_KERNEL,
+ hbqbp->dbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
&hbqbp->dbuf.phys);
if (!hbqbp->dbuf.virt) {
kfree(hbqbp);
@@ -334,7 +391,7 @@
}
/**
- * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_els_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
* @phba: HBA buffer was allocated for
* @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
*
@@ -348,12 +405,73 @@
void
lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
{
- pci_pool_free(phba->lpfc_hbq_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
+ pci_pool_free(phba->lpfc_hrb_pool, hbqbp->dbuf.virt, hbqbp->dbuf.phys);
kfree(hbqbp);
return;
}
/**
+ * lpfc_sli4_rb_alloc - Allocate an SLI4 Receive buffer
+ * @phba: HBA to allocate a receive buffer for
+ *
+ * Description: Allocates a DMA-mapped receive buffer from the lpfc_hrb_pool PCI
+ * pool along a non-DMA-mapped container for it.
+ *
+ * Notes: Not interrupt-safe. Must be called with no locks held.
+ *
+ * Returns:
+ * pointer to HBQ on success
+ * NULL on failure
+ **/
+struct hbq_dmabuf *
+lpfc_sli4_rb_alloc(struct lpfc_hba *phba)
+{
+ struct hbq_dmabuf *dma_buf;
+
+ dma_buf = kmalloc(sizeof(struct hbq_dmabuf), GFP_KERNEL);
+ if (!dma_buf)
+ return NULL;
+
+ dma_buf->hbuf.virt = pci_pool_alloc(phba->lpfc_hrb_pool, GFP_KERNEL,
+ &dma_buf->hbuf.phys);
+ if (!dma_buf->hbuf.virt) {
+ kfree(dma_buf);
+ return NULL;
+ }
+ dma_buf->dbuf.virt = pci_pool_alloc(phba->lpfc_drb_pool, GFP_KERNEL,
+ &dma_buf->dbuf.phys);
+ if (!dma_buf->dbuf.virt) {
+ pci_pool_free(phba->lpfc_hrb_pool, dma_buf->hbuf.virt,
+ dma_buf->hbuf.phys);
+ kfree(dma_buf);
+ return NULL;
+ }
+ dma_buf->size = LPFC_BPL_SIZE;
+ return dma_buf;
+}
+
+/**
+ * lpfc_sli4_rb_free - Frees a receive buffer
+ * @phba: HBA buffer was allocated for
+ * @dmab: DMA Buffer container returned by lpfc_sli4_hbq_alloc
+ *
+ * Description: Frees both the container and the DMA-mapped buffers returned by
+ * lpfc_sli4_rb_alloc.
+ *
+ * Notes: Can be called with or without locks held.
+ *
+ * Returns: None
+ **/
+void
+lpfc_sli4_rb_free(struct lpfc_hba *phba, struct hbq_dmabuf *dmab)
+{
+ pci_pool_free(phba->lpfc_hrb_pool, dmab->hbuf.virt, dmab->hbuf.phys);
+ pci_pool_free(phba->lpfc_drb_pool, dmab->dbuf.virt, dmab->dbuf.phys);
+ kfree(dmab);
+ return;
+}
+
+/**
* lpfc_in_buf_free - Free a DMA buffer
* @phba: HBA buffer is associated with
* @mp: Buffer to free
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 08cdc77..09f659f 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -28,8 +28,10 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -361,7 +363,7 @@
if (!mbox)
goto out;
- rc = lpfc_reg_login(phba, vport->vpi, icmd->un.rcvels.remoteID,
+ rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
(uint8_t *) sp, mbox, 0);
if (rc) {
mempool_free(mbox, phba->mbox_mem_pool);
@@ -495,11 +497,19 @@
lpfc_els_rsp_acc(vport, ELS_CMD_PRLO, cmdiocb, ndlp, NULL);
else
lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
+ if ((ndlp->nlp_type & NLP_FABRIC) &&
+ vport->port_type == LPFC_NPIV_PORT) {
+ lpfc_linkdown_port(vport);
+ mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_DELAY_TMO;
+ spin_unlock_irq(shost->host_lock);
- if ((!(ndlp->nlp_type & NLP_FABRIC) &&
- ((ndlp->nlp_type & NLP_FCP_TARGET) ||
- !(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
- (ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
+ ndlp->nlp_last_elscmd = ELS_CMD_FDISC;
+ } else if ((!(ndlp->nlp_type & NLP_FABRIC) &&
+ ((ndlp->nlp_type & NLP_FCP_TARGET) ||
+ !(ndlp->nlp_type & NLP_FCP_INITIATOR))) ||
+ (ndlp->nlp_state == NLP_STE_ADISC_ISSUE)) {
/* Only try to re-login if this is NOT a Fabric Node */
mod_timer(&ndlp->nlp_delayfunc, jiffies + HZ * 1);
spin_lock_irq(shost->host_lock);
@@ -567,7 +577,7 @@
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
- if (!ndlp->nlp_rpi) {
+ if (!(ndlp->nlp_flag & NLP_RPI_VALID)) {
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
return 0;
}
@@ -857,7 +867,7 @@
lpfc_unreg_rpi(vport, ndlp);
- if (lpfc_reg_login(phba, vport->vpi, irsp->un.elsreq64.remoteID,
+ if (lpfc_reg_rpi(phba, vport->vpi, irsp->un.elsreq64.remoteID,
(uint8_t *) sp, mbox, 0) == 0) {
switch (ndlp->nlp_DID) {
case NameServer_DID:
@@ -1068,6 +1078,7 @@
struct lpfc_iocbq *cmdiocb, *rspiocb;
IOCB_t *irsp;
ADISC *ap;
+ int rc;
cmdiocb = (struct lpfc_iocbq *) arg;
rspiocb = cmdiocb->context_un.rsp_iocb;
@@ -1093,6 +1104,15 @@
return ndlp->nlp_state;
}
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rc = lpfc_sli4_resume_rpi(ndlp);
+ if (rc) {
+ /* Stay in state and retry. */
+ ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
+ return ndlp->nlp_state;
+ }
+ }
+
if (ndlp->nlp_type & NLP_FCP_TARGET) {
ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_MAPPED_NODE);
@@ -1100,6 +1120,7 @@
ndlp->nlp_prev_state = NLP_STE_ADISC_ISSUE;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
}
+
return ndlp->nlp_state;
}
@@ -1190,7 +1211,7 @@
/* cleanup any ndlp on mbox q waiting for reglogin cmpl */
if ((mb = phba->sli.mbox_active)) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
lpfc_nlp_put(ndlp);
mb->context2 = NULL;
@@ -1200,7 +1221,7 @@
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
- if ((mb->mb.mbxCommand == MBX_REG_LOGIN64) &&
+ if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
(ndlp == (struct lpfc_nodelist *) mb->context2)) {
mp = (struct lpfc_dmabuf *) (mb->context1);
if (mp) {
@@ -1251,7 +1272,7 @@
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
uint32_t did = mb->un.varWords[1];
if (mb->mbxStatus) {
@@ -1283,6 +1304,7 @@
}
ndlp->nlp_rpi = mb->un.varWords[0];
+ ndlp->nlp_flag |= NLP_RPI_VALID;
/* Only if we are not a fabric nport do we issue PRLI */
if (!(ndlp->nlp_type & NLP_FABRIC)) {
@@ -1878,11 +1900,12 @@
void *arg, uint32_t evt)
{
LPFC_MBOXQ_t *pmb = (LPFC_MBOXQ_t *) arg;
- MAILBOX_t *mb = &pmb->mb;
+ MAILBOX_t *mb = &pmb->u.mb;
- if (!mb->mbxStatus)
+ if (!mb->mbxStatus) {
ndlp->nlp_rpi = mb->un.varWords[0];
- else {
+ ndlp->nlp_flag |= NLP_RPI_VALID;
+ } else {
if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
lpfc_drop_node(vport, ndlp);
return NLP_STE_FREED_NODE;
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 8032c5a..e9fa676 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -31,8 +31,10 @@
#include <scsi/scsi_transport_fc.h>
#include "lpfc_version.h"
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -57,6 +59,8 @@
"SCSI_PROT_READ_CONVERT",
"SCSI_PROT_WRITE_CONVERT"
};
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
lpfc_debug_save_data(struct scsi_cmnd *cmnd)
@@ -325,7 +329,7 @@
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
new_queue_depth =
@@ -379,7 +383,7 @@
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
if (vports[i]->cfg_lun_queue_depth <=
@@ -427,7 +431,7 @@
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
- for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
shost = lpfc_shost_from_vport(vports[i]);
shost_for_each_device(sdev, shost) {
rport = starget_to_rport(scsi_target(sdev));
@@ -438,22 +442,23 @@
}
/**
- * lpfc_new_scsi_buf - Scsi buffer allocator
+ * lpfc_new_scsi_buf_s3 - Scsi buffer allocator for HBA with SLI3 IF spec
* @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
*
- * This routine allocates a scsi buffer, which contains all the necessary
- * information needed to initiate a SCSI I/O. The non-DMAable buffer region
- * contains information to build the IOCB. The DMAable region contains
- * memory for the FCP CMND, FCP RSP, and the initial BPL. In addition to
- * allocating memory, the FCP CMND and FCP RSP BDEs are setup in the BPL
- * and the BPL BDE is setup in the IOCB.
+ * This routine allocates a scsi buffer for device with SLI-3 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O. The non-DMAable buffer region contains information to build
+ * the IOCB. The DMAable region contains memory for the FCP CMND, FCP RSP,
+ * and the initial BPL. In addition to allocating memory, the FCP CMND and
+ * FCP RSP BDEs are setup in the BPL and the BPL BDE is setup in the IOCB.
*
* Return codes:
- * NULL - Error
- * Pointer to lpfc_scsi_buf data structure - Success
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
**/
-static struct lpfc_scsi_buf *
-lpfc_new_scsi_buf(struct lpfc_vport *vport)
+static int
+lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
{
struct lpfc_hba *phba = vport->phba;
struct lpfc_scsi_buf *psb;
@@ -463,107 +468,401 @@
dma_addr_t pdma_phys_fcp_rsp;
dma_addr_t pdma_phys_bpl;
uint16_t iotag;
+ int bcnt;
- psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
- if (!psb)
- return NULL;
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
- /*
- * Get memory from the pci pool to map the virt space to pci bus space
- * for an I/O. The DMA buffer includes space for the struct fcp_cmnd,
- * struct fcp_rsp and the number of bde's necessary to support the
- * sg_tablesize.
- */
- psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
- &psb->dma_handle);
- if (!psb->data) {
- kfree(psb);
- return NULL;
- }
+ /*
+ * Get memory from the pci pool to map the virt space to pci
+ * bus space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
- /* Initialize virtual ptrs to dma_buf region. */
- memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
- /* Allocate iotag for psb->cur_iocbq. */
- iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
- if (iotag == 0) {
- pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
- psb->data, psb->dma_handle);
- kfree (psb);
- return NULL;
- }
- psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
- psb->fcp_cmnd = psb->data;
- psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
- psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
- sizeof(struct fcp_rsp);
-
- /* Initialize local short-hand pointers. */
- bpl = psb->fcp_bpl;
- pdma_phys_fcp_cmd = psb->dma_handle;
- pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
- pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ psb->fcp_cmnd = psb->data;
+ psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
+ psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
sizeof(struct fcp_rsp);
- /*
- * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
- * list bdes. Initialize the first two and leave the rest for
- * queuecommand.
- */
- bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
- bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
- bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
- bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
+ /* Initialize local short-hand pointers. */
+ bpl = psb->fcp_bpl;
+ pdma_phys_fcp_cmd = psb->dma_handle;
+ pdma_phys_fcp_rsp = psb->dma_handle + sizeof(struct fcp_cmnd);
+ pdma_phys_bpl = psb->dma_handle + sizeof(struct fcp_cmnd) +
+ sizeof(struct fcp_rsp);
- /* Setup the physical region for the FCP RSP */
- bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
- bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
- bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
- bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ bpl[0].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_cmd));
+ bpl[0].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_cmd));
+ bpl[0].tus.f.bdeSize = sizeof(struct fcp_cmnd);
+ bpl[0].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[0].tus.w = le32_to_cpu(bpl[0].tus.w);
- /*
- * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
- * initialize it with all known data now.
- */
- iocb = &psb->cur_iocbq.iocb;
- iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
- if ((phba->sli_rev == 3) &&
- !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
- /* fill in immediate fcp command BDE */
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
- iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
- iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
- unsli3.fcp_ext.icd);
- iocb->un.fcpi64.bdl.addrHigh = 0;
- iocb->ulpBdeCount = 0;
- iocb->ulpLe = 0;
- /* fill in responce BDE */
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags = BUFF_TYPE_BDE_64;
- iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
- sizeof(struct fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrLow =
- putPaddrLow(pdma_phys_fcp_rsp);
- iocb->unsli3.fcp_ext.rbde.addrHigh =
- putPaddrHigh(pdma_phys_fcp_rsp);
- } else {
- iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
- iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
- iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_bpl);
- iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_bpl);
- iocb->ulpBdeCount = 1;
- iocb->ulpLe = 1;
+ /* Setup the physical region for the FCP RSP */
+ bpl[1].addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys_fcp_rsp));
+ bpl[1].addrLow = le32_to_cpu(putPaddrLow(pdma_phys_fcp_rsp));
+ bpl[1].tus.f.bdeSize = sizeof(struct fcp_rsp);
+ bpl[1].tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+ bpl[1].tus.w = le32_to_cpu(bpl[1].tus.w);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ if ((phba->sli_rev == 3) &&
+ !(phba->sli3_options & LPFC_SLI3_BG_ENABLED)) {
+ /* fill in immediate fcp command BDE */
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_IMMED;
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = offsetof(IOCB_t,
+ unsli3.fcp_ext.icd);
+ iocb->un.fcpi64.bdl.addrHigh = 0;
+ iocb->ulpBdeCount = 0;
+ iocb->ulpLe = 0;
+ /* fill in responce BDE */
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
+ BUFF_TYPE_BDE_64;
+ iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
+ sizeof(struct fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrLow =
+ putPaddrLow(pdma_phys_fcp_rsp);
+ iocb->unsli3.fcp_ext.rbde.addrHigh =
+ putPaddrHigh(pdma_phys_fcp_rsp);
+ } else {
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ iocb->un.fcpi64.bdl.bdeSize =
+ (2 * sizeof(struct ulp_bde64));
+ iocb->un.fcpi64.bdl.addrLow =
+ putPaddrLow(pdma_phys_bpl);
+ iocb->un.fcpi64.bdl.addrHigh =
+ putPaddrHigh(pdma_phys_bpl);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ }
+ iocb->ulpClass = CLASS3;
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+
}
- iocb->ulpClass = CLASS3;
- return psb;
+ return bcnt;
}
/**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
- * @phba: The Hba for which this call is being executed.
+ * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
+ * @phba: pointer to lpfc hba data structure.
+ * @axri: pointer to the fcp xri abort wcqe structure.
+ *
+ * This routine is invoked by the worker thread to process a SLI4 fast-path
+ * FCP aborted xri.
+ **/
+void
+lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
+ struct sli4_wcqe_xri_aborted *axri)
+{
+ uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+ struct lpfc_scsi_buf *psb, *next_psb;
+ unsigned long iflag = 0;
+
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock, iflag);
+ list_for_each_entry_safe(psb, next_psb,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+ if (psb->cur_iocbq.sli4_xritag == xri) {
+ list_del(&psb->list);
+ psb->status = IOSTAT_SUCCESS;
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ lpfc_release_scsi_buf_s4(phba, psb);
+ return;
+ }
+ }
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+}
+
+/**
+ * lpfc_sli4_repost_scsi_sgl_list - Repsot the Scsi buffers sgl pages as block
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine walks the list of scsi buffers that have been allocated and
+ * repost them to the HBA by using SGL block post. This is needed after a
+ * pci_function_reset/warm_start or start. The lpfc_hba_down_post_s4 routine
+ * is responsible for moving all scsi buffers on the lpfc_abts_scsi_sgl_list
+ * to the lpfc_scsi_buf_list. If the repost fails, reject all scsi buffers.
+ *
+ * Returns: 0 = success, non-zero failure.
+ **/
+int
+lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *psb;
+ int index, status, bcnt = 0, rcnt = 0, rc = 0;
+ LIST_HEAD(sblist);
+
+ for (index = 0; index < phba->sli4_hba.scsi_xri_cnt; index++) {
+ psb = phba->sli4_hba.lpfc_scsi_psb_array[index];
+ if (psb) {
+ /* Remove from SCSI buffer list */
+ list_del(&psb->list);
+ /* Add it to a local SCSI buffer list */
+ list_add_tail(&psb->list, &sblist);
+ if (++rcnt == LPFC_NEMBED_MBOX_SGL_CNT) {
+ bcnt = rcnt;
+ rcnt = 0;
+ }
+ } else
+ /* A hole present in the XRI array, need to skip */
+ bcnt = rcnt;
+
+ if (index == phba->sli4_hba.scsi_xri_cnt - 1)
+ /* End of XRI array for SCSI buffer, complete */
+ bcnt = rcnt;
+
+ /* Continue until collect up to a nembed page worth of sgls */
+ if (bcnt == 0)
+ continue;
+ /* Now, post the SCSI buffer list sgls as a block */
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ bcnt = 0;
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
+ }
+ return rc;
+}
+
+/**
+ * lpfc_new_scsi_buf_s4 - Scsi buffer allocator for HBA with SLI4 IF spec
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine allocates a scsi buffer for device with SLI-4 interface spec,
+ * the scsi buffer contains all the necessary information needed to initiate
+ * a SCSI I/O.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static int
+lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc)
+{
+ struct lpfc_hba *phba = vport->phba;
+ struct lpfc_scsi_buf *psb;
+ struct sli4_sge *sgl;
+ IOCB_t *iocb;
+ dma_addr_t pdma_phys_fcp_cmd;
+ dma_addr_t pdma_phys_fcp_rsp;
+ dma_addr_t pdma_phys_bpl, pdma_phys_bpl1;
+ uint16_t iotag, last_xritag = NO_XRI;
+ int status = 0, index;
+ int bcnt;
+ int non_sequential_xri = 0;
+ int rc = 0;
+ LIST_HEAD(sblist);
+
+ for (bcnt = 0; bcnt < num_to_alloc; bcnt++) {
+ psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
+ if (!psb)
+ break;
+
+ /*
+ * Get memory from the pci pool to map the virt space to pci bus
+ * space for an I/O. The DMA buffer includes space for the
+ * struct fcp_cmnd, struct fcp_rsp and the number of bde's
+ * necessary to support the sg_tablesize.
+ */
+ psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool,
+ GFP_KERNEL, &psb->dma_handle);
+ if (!psb->data) {
+ kfree(psb);
+ break;
+ }
+
+ /* Initialize virtual ptrs to dma_buf region. */
+ memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
+
+ /* Allocate iotag for psb->cur_iocbq. */
+ iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
+ if (iotag == 0) {
+ kfree(psb);
+ break;
+ }
+
+ psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba);
+ if (psb->cur_iocbq.sli4_xritag == NO_XRI) {
+ pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
+ psb->data, psb->dma_handle);
+ kfree(psb);
+ break;
+ }
+ if (last_xritag != NO_XRI
+ && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) {
+ non_sequential_xri = 1;
+ } else
+ list_add_tail(&psb->list, &sblist);
+ last_xritag = psb->cur_iocbq.sli4_xritag;
+
+ index = phba->sli4_hba.scsi_xri_cnt++;
+ psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
+
+ psb->fcp_bpl = psb->data;
+ psb->fcp_cmnd = (psb->data + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ psb->fcp_rsp = (struct fcp_rsp *)((uint8_t *)psb->fcp_cmnd +
+ sizeof(struct fcp_cmnd));
+
+ /* Initialize local short-hand pointers. */
+ sgl = (struct sli4_sge *)psb->fcp_bpl;
+ pdma_phys_bpl = psb->dma_handle;
+ pdma_phys_fcp_cmd =
+ (psb->dma_handle + phba->cfg_sg_dma_buf_size)
+ - (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp));
+ pdma_phys_fcp_rsp = pdma_phys_fcp_cmd + sizeof(struct fcp_cmnd);
+
+ /*
+ * The first two bdes are the FCP_CMD and FCP_RSP. The balance
+ * are sg list bdes. Initialize the first two and leave the
+ * rest for queuecommand.
+ */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_cmnd));
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ sgl++;
+
+ /* Setup the physical region for the FCP RSP */
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp));
+ bf_set(lpfc_sli4_sge_len, sgl, sizeof(struct fcp_rsp));
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+
+ /*
+ * Since the IOCB for the FCP I/O is built into this
+ * lpfc_scsi_buf, initialize it with all known data now.
+ */
+ iocb = &psb->cur_iocbq.iocb;
+ iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
+ iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDE_64;
+ /* setting the BLP size to 2 * sizeof BDE may not be correct.
+ * We are setting the bpl to point to out sgl. An sgl's
+ * entries are 16 bytes, a bpl entries are 12 bytes.
+ */
+ iocb->un.fcpi64.bdl.bdeSize = sizeof(struct fcp_cmnd);
+ iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys_fcp_cmd);
+ iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys_fcp_cmd);
+ iocb->ulpBdeCount = 1;
+ iocb->ulpLe = 1;
+ iocb->ulpClass = CLASS3;
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = pdma_phys_bpl + SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ psb->dma_phys_bpl = pdma_phys_bpl;
+ phba->sli4_hba.lpfc_scsi_psb_array[index] = psb;
+ if (non_sequential_xri) {
+ status = lpfc_sli4_post_sgl(phba, pdma_phys_bpl,
+ pdma_phys_bpl1,
+ psb->cur_iocbq.sli4_xritag);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ break;
+ }
+ }
+ if (bcnt) {
+ status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt);
+ /* Reset SCSI buffer count for next round of posting */
+ while (!list_empty(&sblist)) {
+ list_remove_head(&sblist, psb, struct lpfc_scsi_buf,
+ list);
+ if (status) {
+ /* Put this back on the abort scsi list */
+ psb->status = IOSTAT_LOCAL_REJECT;
+ psb->result = IOERR_ABORT_REQUESTED;
+ rc++;
+ } else
+ psb->status = IOSTAT_SUCCESS;
+ /* Put it back into the SCSI buffer list */
+ lpfc_release_scsi_buf_s4(phba, psb);
+ }
+ }
+
+ return bcnt + non_sequential_xri - rc;
+}
+
+/**
+ * lpfc_new_scsi_buf - Wrapper funciton for scsi buffer allocator
+ * @vport: The virtual port for which this call being executed.
+ * @num_to_allocate: The requested number of buffers to allocate.
+ *
+ * This routine wraps the actual SCSI buffer allocator function pointer from
+ * the lpfc_hba struct.
+ *
+ * Return codes:
+ * int - number of scsi buffers that were allocated.
+ * 0 = failure, less than num_to_alloc is a partial failure.
+ **/
+static inline int
+lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
+{
+ return vport->phba->lpfc_new_scsi_buf(vport, num_to_alloc);
+}
+
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
* and returns to caller.
@@ -591,7 +890,7 @@
}
/**
- * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
@@ -599,7 +898,7 @@
* lpfc_scsi_buf_list list.
**/
static void
-lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+lpfc_release_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
unsigned long iflag = 0;
@@ -610,21 +909,69 @@
}
/**
- * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
+ * lpfc_release_scsi_buf_s4: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list. For SLI4 XRI's are tied to the scsi buffer
+ * and cannot be reused for at least RA_TOV amount of time if it was
+ * aborted.
+ **/
+static void
+lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ unsigned long iflag = 0;
+
+ if (psb->status == IOSTAT_LOCAL_REJECT
+ && psb->result == IOERR_ABORT_REQUESTED) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list,
+ &phba->sli4_hba.lpfc_abts_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->sli4_hba.abts_scsi_buf_list_lock,
+ iflag);
+ } else {
+
+ spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+ psb->pCmd = NULL;
+ list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
+ spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+ }
+}
+
+/**
+ * lpfc_release_scsi_buf: Return a scsi buffer back to hba scsi buf list.
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is being released.
+ *
+ * This routine releases @psb scsi buffer by adding it to tail of @phba
+ * lpfc_scsi_buf_list list.
+ **/
+static void
+lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+
+ phba->lpfc_release_scsi_buf(phba, psb);
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
* This routine does the pci dma mapping for scatter-gather list of scsi cmnd
- * field of @lpfc_cmd. This routine scans through sg elements and format the
- * bdea. This routine also initializes all IOCB fields which are dependent on
- * scsi command request buffer.
+ * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans
+ * through sg elements and format the bdea. This routine also initializes all
+ * IOCB fields which are dependent on scsi command request buffer.
*
* Return codes:
* 1 - Error
* 0 - Success
**/
static int
-lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
{
struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
struct scatterlist *sgel = NULL;
@@ -1412,6 +1759,133 @@
}
/**
+ * lpfc_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine does the pci dma mapping for scatter-gather list of scsi cmnd
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static int
+lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
+ struct scatterlist *sgel = NULL;
+ struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
+ struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+ IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
+ dma_addr_t physaddr;
+ uint32_t num_bde = 0;
+ uint32_t dma_len;
+ uint32_t dma_offset = 0;
+ int nseg;
+
+ /*
+ * There are three possibilities here - use scatter-gather segment, use
+ * the single mapping, or neither. Start the lpfc command prep by
+ * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
+ * data bde entry.
+ */
+ if (scsi_sg_count(scsi_cmnd)) {
+ /*
+ * The driver stores the segment count returned from pci_map_sg
+ * because this a count of dma-mappings used to map the use_sg
+ * pages. They are not guaranteed to be the same for those
+ * architectures that implement an IOMMU.
+ */
+
+ nseg = scsi_dma_map(scsi_cmnd);
+ if (unlikely(!nseg))
+ return 1;
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl += 1;
+
+ lpfc_cmd->seg_cnt = nseg;
+ if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
+ printk(KERN_ERR "%s: Too many sg segments from "
+ "dma_map_sg. Config %d, seg_cnt %d\n",
+ __func__, phba->cfg_sg_seg_cnt,
+ lpfc_cmd->seg_cnt);
+ scsi_dma_unmap(scsi_cmnd);
+ return 1;
+ }
+
+ /*
+ * The driver established a maximum scatter-gather segment count
+ * during probe that limits the number of sg elements in any
+ * single scsi command. Just run through the seg_cnt and format
+ * the sge's.
+ * When using SLI-3 the driver will try to fit all the BDEs into
+ * the IOCB. If it can't then the BDEs get added to a BPL as it
+ * does for SLI-2 mode.
+ */
+ scsi_for_each_sg(scsi_cmnd, sgel, nseg, num_bde) {
+ physaddr = sg_dma_address(sgel);
+ dma_len = sg_dma_len(sgel);
+ bf_set(lpfc_sli4_sge_len, sgl, sg_dma_len(sgel));
+ sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr));
+ sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr));
+ if ((num_bde + 1) == nseg)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ bf_set(lpfc_sli4_sge_offset, sgl, dma_offset);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ dma_offset += dma_len;
+ sgl++;
+ }
+ } else {
+ sgl += 1;
+ /* clear the last flag in the fcp_rsp map entry */
+ sgl->word2 = le32_to_cpu(sgl->word2);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ }
+
+ /*
+ * Finish initializing those IOCB fields that are dependent on the
+ * scsi_cmnd request_buffer. Note that for SLI-2 the bdeSize is
+ * explicitly reinitialized.
+ * all iocb memory resources are reused.
+ */
+ fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
+
+ /*
+ * Due to difference in data length between DIF/non-DIF paths,
+ * we need to set word 4 of IOCB here
+ */
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
+ return 0;
+}
+
+/**
+ * lpfc_scsi_prep_dma_buf - Wrapper function for DMA mapping of scsi buffer
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be mapped.
+ *
+ * This routine wraps the actual DMA mapping function pointer from the
+ * lpfc_hba struct.
+ *
+ * Return codes:
+ * 1 - Error
+ * 0 - Success
+ **/
+static inline int
+lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
+{
+ return phba->lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
+}
+
+/**
* lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
@@ -1504,15 +1978,15 @@
}
/**
- * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
- * @phba: The Hba for which this call is being executed.
+ * lpfc_scsi_unprep_dma_buf_s3 - Un-map DMA mapping of SG-list for SLI3 dev
+ * @phba: The HBA for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
* This routine does DMA un-mapping of scatter gather list of scsi command
- * field of @lpfc_cmd.
+ * field of @lpfc_cmd for device with SLI-3 interface spec.
**/
static void
-lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
+lpfc_scsi_unprep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
{
/*
* There are only two special cases to consider. (1) the scsi command
@@ -1529,6 +2003,36 @@
}
/**
+ * lpfc_scsi_unprep_dma_buf_s4 - Un-map DMA mapping of SG-list for SLI4 dev
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec. If we have to
+ * remove the sgl for this scsi buffer then we will do it here. For now
+ * we should be able to just call the sli3 unprep routine.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ lpfc_scsi_unprep_dma_buf_s3(phba, psb);
+}
+
+/**
+ * lpfc_scsi_unprep_dma_buf - Wrapper function for unmap DMA mapping of SG-list
+ * @phba: The Hba for which this call is being executed.
+ * @psb: The scsi buffer which is going to be un-mapped.
+ *
+ * This routine does DMA un-mapping of scatter gather list of scsi command
+ * field of @lpfc_cmd for device with SLI-4 interface spec.
+ **/
+static void
+lpfc_scsi_unprep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
+{
+ phba->lpfc_scsi_unprep_dma_buf(phba, psb);
+}
+
+/**
* lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
@@ -1676,7 +2180,7 @@
* lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
- * @pIocbOut: The response IOCBQ for the scsi cmnd .
+ * @pIocbOut: The response IOCBQ for the scsi cmnd.
*
* This routine assigns scsi command result by looking into response IOCB
* status field appropriately. This routine handles QUEUE FULL condition as
@@ -1957,16 +2461,16 @@
}
/**
- * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s3 - Convert scsi cmnd to FCP infor unit for SLI3 dev
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
*
* This routine initializes fcp_cmnd and iocb data structure from scsi command
- * to transfer.
+ * to transfer for device with SLI3 interface spec.
**/
static void
-lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+lpfc_scsi_prep_cmnd_s3(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
struct lpfc_nodelist *pnode)
{
struct lpfc_hba *phba = vport->phba;
@@ -2013,8 +2517,11 @@
if (scsi_sg_count(scsi_cmnd)) {
if (datadir == DMA_TO_DEVICE) {
iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
- iocb_cmd->un.fcpi.fcpi_parm = 0;
- iocb_cmd->ulpPU = 0;
+ if (phba->sli_rev < LPFC_SLI_REV4) {
+ iocb_cmd->un.fcpi.fcpi_parm = 0;
+ iocb_cmd->ulpPU = 0;
+ } else
+ iocb_cmd->ulpPU = PARM_READ_CHECK;
fcp_cmnd->fcpCntl3 = WRITE_DATA;
phba->fc4OutputRequests++;
} else {
@@ -2051,20 +2558,60 @@
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
+ * lpfc_scsi_prep_cmnd_s4 - Convert scsi cmnd to FCP infor unit for SLI4 dev
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine initializes fcp_cmnd and iocb data structure from scsi command
+ * to transfer for device with SLI4 interface spec.
+ **/
+static void
+lpfc_scsi_prep_cmnd_s4(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_cmnd_s3(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_cmnd - Wrapper func for convert scsi cmnd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: The scsi command which needs to send.
+ * @pnode: Pointer to lpfc_nodelist.
+ *
+ * This routine wraps the actual convert SCSI cmnd function pointer from
+ * the lpfc_hba struct.
+ **/
+static inline void
+lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
+ struct lpfc_nodelist *pnode)
+{
+ vport->phba->lpfc_scsi_prep_cmnd(vport, lpfc_cmd, pnode);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s3 - Convert SLI3 scsi TM cmd to FCP info unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
* @task_mgmt_cmd: SCSI task management command.
*
- * This routine creates FCP information unit corresponding to @task_mgmt_cmd.
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-3 interface spec.
*
* Return codes:
* 0 - Error
* 1 - Success
**/
static int
-lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+lpfc_scsi_prep_task_mgmt_cmd_s3(struct lpfc_vport *vport,
struct lpfc_scsi_buf *lpfc_cmd,
unsigned int lun,
uint8_t task_mgmt_cmd)
@@ -2114,6 +2661,107 @@
}
/**
+ * lpfc_scsi_prep_task_mgmt_cmnd_s4 - Convert SLI4 scsi TM cmd to FCP info unit
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine creates FCP information unit corresponding to @task_mgmt_cmd
+ * for device with SLI-4 interface spec.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static int
+lpfc_scsi_prep_task_mgmt_cmd_s4(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ /*
+ * The prep cmnd routines do not touch the sgl or its
+ * entries. We may not have to do anything different.
+ * I will leave this function in place until we can
+ * run some IO through the driver and determine if changes
+ * are needed.
+ */
+ return lpfc_scsi_prep_task_mgmt_cmd_s3(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_prep_task_mgmt_cmnd - Wrapper func convert scsi TM cmd to FCP info
+ * @vport: The virtual port for which this call is being executed.
+ * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
+ * @lun: Logical unit number.
+ * @task_mgmt_cmd: SCSI task management command.
+ *
+ * This routine wraps the actual convert SCSI TM to FCP information unit
+ * function pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * 0 - Error
+ * 1 - Success
+ **/
+static inline int
+lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
+ struct lpfc_scsi_buf *lpfc_cmd,
+ unsigned int lun,
+ uint8_t task_mgmt_cmd)
+{
+ struct lpfc_hba *phba = vport->phba;
+
+ return phba->lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
+ task_mgmt_cmd);
+}
+
+/**
+ * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SCSI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s3;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s3;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s3;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
+ phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
+ phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd_s4;
+ phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf_s4;
+ phba->lpfc_scsi_prep_task_mgmt_cmd =
+ lpfc_scsi_prep_task_mgmt_cmd_s4;
+ phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1418 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
+ phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
+ return 0;
+}
+
+/**
* lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
* @cmdiocbq: Pointer to lpfc_iocbq data structure.
@@ -2178,9 +2826,8 @@
lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
"0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
- iocbq, iocbqrsp, lpfc_cmd->timeout);
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
+ iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status != IOCB_SUCCESS) {
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2305,7 +2952,6 @@
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli *psli = &phba->sli;
struct lpfc_rport_data *rdata = cmnd->device->hostdata;
struct lpfc_nodelist *ndlp = rdata->pnode;
struct lpfc_scsi_buf *lpfc_cmd;
@@ -2427,7 +3073,7 @@
lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
atomic_inc(&ndlp->cmd_pending);
- err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
+ err = lpfc_sli_issue_iocb(phba, LPFC_FCP_RING,
&lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
if (err) {
atomic_dec(&ndlp->cmd_pending);
@@ -2490,7 +3136,6 @@
struct Scsi_Host *shost = cmnd->device->host;
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
struct lpfc_iocbq *iocb;
struct lpfc_iocbq *abtsiocb;
struct lpfc_scsi_buf *lpfc_cmd;
@@ -2531,7 +3176,10 @@
icmd = &abtsiocb->iocb;
icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
icmd->un.acxri.abortContextTag = cmd->ulpContext;
- icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ icmd->un.acxri.abortIoTag = iocb->sli4_xritag;
+ else
+ icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
icmd->ulpLe = 1;
icmd->ulpClass = cmd->ulpClass;
@@ -2542,7 +3190,8 @@
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
abtsiocb->vport = vport;
- if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
+ if (lpfc_sli_issue_iocb(phba, LPFC_FCP_RING, abtsiocb, 0) ==
+ IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
ret = FAILED;
goto out;
@@ -2668,8 +3317,7 @@
"0703 Issue target reset to TGT %d LUN %d "
"rpi x%x nlp_flag x%x\n", cmnd->device->id,
cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
- status = lpfc_sli_issue_iocb_wait(phba,
- &phba->sli.ring[phba->sli.fcp_ring],
+ status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING,
iocbq, iocbqrsp, lpfc_cmd->timeout);
if (status == IOCB_TIMEDOUT) {
iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
@@ -2825,11 +3473,10 @@
{
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
- struct lpfc_scsi_buf *scsi_buf = NULL;
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
- uint32_t total = 0, i;
+ uint32_t total = 0;
uint32_t num_to_alloc = 0;
- unsigned long flags;
+ int num_allocated = 0;
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
@@ -2863,20 +3510,13 @@
(phba->cfg_hba_queue_depth - total));
num_to_alloc = phba->cfg_hba_queue_depth - total;
}
-
- for (i = 0; i < num_to_alloc; i++) {
- scsi_buf = lpfc_new_scsi_buf(vport);
- if (!scsi_buf) {
- lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
- "0706 Failed to allocate "
- "command buffer\n");
- break;
- }
-
- spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
- phba->total_scsi_bufs++;
- list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
- spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
+ num_allocated = lpfc_new_scsi_buf(vport, num_to_alloc);
+ if (num_to_alloc != num_allocated) {
+ lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
+ "0708 Allocation request of %d "
+ "command buffers did not succeed. "
+ "Allocated %d buffers.\n",
+ num_to_alloc, num_allocated);
}
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index c7c440d..65dfc8b 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -140,6 +140,8 @@
struct fcp_rsp *fcp_rsp;
struct ulp_bde64 *fcp_bpl;
+ dma_addr_t dma_phys_bpl;
+
/* cur_iocbq has phys of the dma-able buffer.
* Iotag is in here
*/
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index eb5c75c..ff04daf 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
@@ -29,9 +29,12 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -40,24 +43,7 @@
#include "lpfc_logmsg.h"
#include "lpfc_compat.h"
#include "lpfc_debugfs.h"
-
-/*
- * Define macro to log: Mailbox command x%x cannot issue Data
- * This allows multiple uses of lpfc_msgBlk0311
- * w/o perturbing log msg utility.
- */
-#define LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag) \
- lpfc_printf_log(phba, \
- KERN_INFO, \
- LOG_MBOX | LOG_SLI, \
- "(%d):0311 Mailbox command x%x cannot " \
- "issue Data: x%x x%x x%x\n", \
- pmbox->vport ? pmbox->vport->vpi : 0, \
- pmbox->mb.mbxCommand, \
- phba->pport->port_state, \
- psli->sli_flag, \
- flag)
-
+#include "lpfc_vport.h"
/* There are only four IOCB completion types. */
typedef enum _lpfc_iocb_type {
@@ -67,6 +53,350 @@
LPFC_ABORT_IOCB
} lpfc_iocb_type;
+
+/* Provide function prototypes local to this module. */
+static int lpfc_sli_issue_mbox_s4(struct lpfc_hba *, LPFC_MBOXQ_t *,
+ uint32_t);
+static int lpfc_sli4_read_rev(struct lpfc_hba *, LPFC_MBOXQ_t *,
+ uint8_t *, uint32_t *);
+
+static IOCB_t *
+lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq)
+{
+ return &iocbq->iocb;
+}
+
+/**
+ * lpfc_sli4_wq_put - Put a Work Queue Entry on an Work Queue
+ * @q: The Work Queue to operate on.
+ * @wqe: The work Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
+{
+ union lpfc_wqe *temp_wqe = q->qe[q->host_index].wqe;
+ struct lpfc_register doorbell;
+ uint32_t host_index;
+
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+ return -ENOMEM;
+ /* set consumption flag every once in a while */
+ if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
+ bf_set(lpfc_wqe_gen_wqec, &wqe->generic, 1);
+
+ lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
+
+ /* Update the host index before invoking device */
+ host_index = q->host_index;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+
+ /* Ring Doorbell */
+ doorbell.word0 = 0;
+ bf_set(lpfc_wq_doorbell_num_posted, &doorbell, 1);
+ bf_set(lpfc_wq_doorbell_index, &doorbell, host_index);
+ bf_set(lpfc_wq_doorbell_id, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.WQDBregaddr);
+ readl(q->phba->sli4_hba.WQDBregaddr); /* Flush */
+
+ return 0;
+}
+
+/**
+ * lpfc_sli4_wq_release - Updates internal hba index for WQ
+ * @q: The Work Queue to operate on.
+ * @index: The index to advance the hba index to.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * Work Queue Entries by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_wq_release(struct lpfc_queue *q, uint32_t index)
+{
+ uint32_t released = 0;
+
+ if (q->hba_index == index)
+ return 0;
+ do {
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ released++;
+ } while (q->hba_index != index);
+ return released;
+}
+
+/**
+ * lpfc_sli4_mq_put - Put a Mailbox Queue Entry on an Mailbox Queue
+ * @q: The Mailbox Queue to operate on.
+ * @wqe: The Mailbox Queue Entry to put on the Work queue.
+ *
+ * This routine will copy the contents of @mqe to the next available entry on
+ * the @q. This function will then ring the Work Queue Doorbell to signal the
+ * HBA to start processing the Work Queue Entry. This function returns 0 if
+ * successful. If no entries are available on @q then this function will return
+ * -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static uint32_t
+lpfc_sli4_mq_put(struct lpfc_queue *q, struct lpfc_mqe *mqe)
+{
+ struct lpfc_mqe *temp_mqe = q->qe[q->host_index].mqe;
+ struct lpfc_register doorbell;
+ uint32_t host_index;
+
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->host_index + 1) % q->entry_count) == q->hba_index)
+ return -ENOMEM;
+ lpfc_sli_pcimem_bcopy(mqe, temp_mqe, q->entry_size);
+ /* Save off the mailbox pointer for completion */
+ q->phba->mbox = (MAILBOX_t *)temp_mqe;
+
+ /* Update the host index before invoking device */
+ host_index = q->host_index;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+
+ /* Ring Doorbell */
+ doorbell.word0 = 0;
+ bf_set(lpfc_mq_doorbell_num_posted, &doorbell, 1);
+ bf_set(lpfc_mq_doorbell_id, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.MQDBregaddr);
+ readl(q->phba->sli4_hba.MQDBregaddr); /* Flush */
+ return 0;
+}
+
+/**
+ * lpfc_sli4_mq_release - Updates internal hba index for MQ
+ * @q: The Mailbox Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * a Mailbox Queue Entry by the HBA. When the HBA indicates that it has consumed
+ * an entry the host calls this function to update the queue's internal
+ * pointers. This routine returns the number of entries that were consumed by
+ * the HBA.
+ **/
+static uint32_t
+lpfc_sli4_mq_release(struct lpfc_queue *q)
+{
+ /* Clear the mailbox pointer for completion */
+ q->phba->mbox = NULL;
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return 1;
+}
+
+/**
+ * lpfc_sli4_eq_get - Gets the next valid EQE from a EQ
+ * @q: The Event Queue to get the first valid EQE from
+ *
+ * This routine will get the first valid Event Queue Entry from @q, update
+ * the queue's internal hba index, and return the EQE. If no valid EQEs are in
+ * the Queue (no more work to do), or the Queue is full of EQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_eqe *
+lpfc_sli4_eq_get(struct lpfc_queue *q)
+{
+ struct lpfc_eqe *eqe = q->qe[q->hba_index].eqe;
+
+ /* If the next EQE is not valid then we are done */
+ if (!bf_get(lpfc_eqe_valid, eqe))
+ return NULL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+ return NULL;
+
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return eqe;
+}
+
+/**
+ * lpfc_sli4_eq_release - Indicates the host has finished processing an EQ
+ * @q: The Event Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Event Queue Entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the EQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of EQEs that were popped.
+ **/
+uint32_t
+lpfc_sli4_eq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_eqe *temp_eqe;
+ struct lpfc_register doorbell;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_eqe = q->qe[q->host_index].eqe;
+ bf_set(lpfc_eqe_valid, temp_eqe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm) {
+ bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
+ }
+ bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
+ bf_set(lpfc_eqcq_doorbell_eqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_cq_get - Gets the next valid CQE from a CQ
+ * @q: The Completion Queue to get the first valid CQE from
+ *
+ * This routine will get the first valid Completion Queue Entry from @q, update
+ * the queue's internal hba index, and return the CQE. If no valid CQEs are in
+ * the Queue (no more work to do), or the Queue is full of CQEs that have been
+ * processed, but not popped back to the HBA then this routine will return NULL.
+ **/
+static struct lpfc_cqe *
+lpfc_sli4_cq_get(struct lpfc_queue *q)
+{
+ struct lpfc_cqe *cqe;
+
+ /* If the next CQE is not valid then we are done */
+ if (!bf_get(lpfc_cqe_valid, q->qe[q->hba_index].cqe))
+ return NULL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((q->hba_index + 1) % q->entry_count) == q->host_index)
+ return NULL;
+
+ cqe = q->qe[q->hba_index].cqe;
+ q->hba_index = ((q->hba_index + 1) % q->entry_count);
+ return cqe;
+}
+
+/**
+ * lpfc_sli4_cq_release - Indicates the host has finished processing a CQ
+ * @q: The Completion Queue that the host has completed processing for.
+ * @arm: Indicates whether the host wants to arms this CQ.
+ *
+ * This routine will mark all Completion queue entries on @q, from the last
+ * known completed entry to the last entry that was processed, as completed
+ * by clearing the valid bit for each completion queue entry. Then it will
+ * notify the HBA, by ringing the doorbell, that the CQEs have been processed.
+ * The internal host index in the @q will be updated by this routine to indicate
+ * that the host has finished processing the entries. The @arm parameter
+ * indicates that the queue should be rearmed when ringing the doorbell.
+ *
+ * This function will return the number of CQEs that were released.
+ **/
+uint32_t
+lpfc_sli4_cq_release(struct lpfc_queue *q, bool arm)
+{
+ uint32_t released = 0;
+ struct lpfc_cqe *temp_qe;
+ struct lpfc_register doorbell;
+
+ /* while there are valid entries */
+ while (q->hba_index != q->host_index) {
+ temp_qe = q->qe[q->host_index].cqe;
+ bf_set(lpfc_cqe_valid, temp_qe, 0);
+ released++;
+ q->host_index = ((q->host_index + 1) % q->entry_count);
+ }
+ if (unlikely(released == 0 && !arm))
+ return 0;
+
+ /* ring doorbell for number popped */
+ doorbell.word0 = 0;
+ if (arm)
+ bf_set(lpfc_eqcq_doorbell_arm, &doorbell, 1);
+ bf_set(lpfc_eqcq_doorbell_num_released, &doorbell, released);
+ bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_COMPLETION);
+ bf_set(lpfc_eqcq_doorbell_cqid, &doorbell, q->queue_id);
+ writel(doorbell.word0, q->phba->sli4_hba.EQCQDBregaddr);
+ return released;
+}
+
+/**
+ * lpfc_sli4_rq_put - Put a Receive Buffer Queue Entry on a Receive Queue
+ * @q: The Header Receive Queue to operate on.
+ * @wqe: The Receive Queue Entry to put on the Receive queue.
+ *
+ * This routine will copy the contents of @wqe to the next available entry on
+ * the @q. This function will then ring the Receive Queue Doorbell to signal the
+ * HBA to start processing the Receive Queue Entry. This function returns the
+ * index that the rqe was copied to if successful. If no entries are available
+ * on @q then this function will return -ENOMEM.
+ * The caller is expected to hold the hbalock when calling this routine.
+ **/
+static int
+lpfc_sli4_rq_put(struct lpfc_queue *hq, struct lpfc_queue *dq,
+ struct lpfc_rqe *hrqe, struct lpfc_rqe *drqe)
+{
+ struct lpfc_rqe *temp_hrqe = hq->qe[hq->host_index].rqe;
+ struct lpfc_rqe *temp_drqe = dq->qe[dq->host_index].rqe;
+ struct lpfc_register doorbell;
+ int put_index = hq->host_index;
+
+ if (hq->type != LPFC_HRQ || dq->type != LPFC_DRQ)
+ return -EINVAL;
+ if (hq->host_index != dq->host_index)
+ return -EINVAL;
+ /* If the host has not yet processed the next entry then we are done */
+ if (((hq->host_index + 1) % hq->entry_count) == hq->hba_index)
+ return -EBUSY;
+ lpfc_sli_pcimem_bcopy(hrqe, temp_hrqe, hq->entry_size);
+ lpfc_sli_pcimem_bcopy(drqe, temp_drqe, dq->entry_size);
+
+ /* Update the host index to point to the next slot */
+ hq->host_index = ((hq->host_index + 1) % hq->entry_count);
+ dq->host_index = ((dq->host_index + 1) % dq->entry_count);
+
+ /* Ring The Header Receive Queue Doorbell */
+ if (!(hq->host_index % LPFC_RQ_POST_BATCH)) {
+ doorbell.word0 = 0;
+ bf_set(lpfc_rq_doorbell_num_posted, &doorbell,
+ LPFC_RQ_POST_BATCH);
+ bf_set(lpfc_rq_doorbell_id, &doorbell, hq->queue_id);
+ writel(doorbell.word0, hq->phba->sli4_hba.RQDBregaddr);
+ }
+ return put_index;
+}
+
+/**
+ * lpfc_sli4_rq_release - Updates internal hba index for RQ
+ * @q: The Header Receive Queue to operate on.
+ *
+ * This routine will update the HBA index of a queue to reflect consumption of
+ * one Receive Queue Entry by the HBA. When the HBA indicates that it has
+ * consumed an entry the host calls this function to update the queue's
+ * internal pointers. This routine returns the number of entries that were
+ * consumed by the HBA.
+ **/
+static uint32_t
+lpfc_sli4_rq_release(struct lpfc_queue *hq, struct lpfc_queue *dq)
+{
+ if ((hq->type != LPFC_HRQ) || (dq->type != LPFC_DRQ))
+ return 0;
+ hq->hba_index = ((hq->hba_index + 1) % hq->entry_count);
+ dq->hba_index = ((dq->hba_index + 1) % dq->entry_count);
+ return 1;
+}
+
/**
* lpfc_cmd_iocb - Get next command iocb entry in the ring
* @phba: Pointer to HBA context object.
@@ -121,6 +451,76 @@
}
/**
+ * __lpfc_clear_active_sglq - Remove the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function clears the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+ uint16_t adj_xri;
+ struct lpfc_sglq *sglq;
+ adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+ return NULL;
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+ phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL;
+ return sglq;
+}
+
+/**
+ * __lpfc_get_active_sglq - Get the active sglq for this XRI.
+ * @phba: Pointer to HBA context object.
+ * @xritag: XRI value.
+ *
+ * This function returns the sglq pointer from the array of acive
+ * sglq's. The xritag that is passed in is used to index into the
+ * array. Before the xritag can be used it needs to be adjusted
+ * by subtracting the xribase.
+ *
+ * Returns sglq ponter = success, NULL = Failure.
+ **/
+static struct lpfc_sglq *
+__lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
+{
+ uint16_t adj_xri;
+ struct lpfc_sglq *sglq;
+ adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri)
+ return NULL;
+ sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri];
+ return sglq;
+}
+
+/**
+ * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Gets a new driver sglq object from the sglq list. If the
+ * list is not empty then it is successful, it returns pointer to the newly
+ * allocated sglq object else it returns NULL.
+ **/
+static struct lpfc_sglq *
+__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+{
+ struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
+ struct lpfc_sglq *sglq = NULL;
+ uint16_t adj_xri;
+ list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+ adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
+ phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+ return sglq;
+}
+
+/**
* lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
@@ -142,6 +542,82 @@
}
/**
+ * __lpfc_sli_release_iocbq_s4 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ * The sqlq structure that holds the xritag and phys and virtual
+ * mappings for the scatter gather list is retrieved from the
+ * active array of sglq. The get of the sglq pointer also clears
+ * the entry in the array. If the status of the IO indiactes that
+ * this IO was aborted then the sglq entry it put on the
+ * lpfc_abts_els_sgl_list until the CQ_ABORTED_XRI is received. If the
+ * IO has good status or fails for any other reason then the sglq
+ * entry is added to the free list (lpfc_sgl_list).
+ **/
+static void
+__lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+ struct lpfc_sglq *sglq;
+ size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+ unsigned long iflag;
+
+ if (iocbq->sli4_xritag == NO_XRI)
+ sglq = NULL;
+ else
+ sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag);
+ if (sglq) {
+ if (iocbq->iocb_flag & LPFC_DRIVER_ABORTED
+ || ((iocbq->iocb.ulpStatus == IOSTAT_LOCAL_REJECT)
+ && (iocbq->iocb.un.ulpWord[4]
+ == IOERR_SLI_ABORTED))) {
+ spin_lock_irqsave(&phba->sli4_hba.abts_sgl_list_lock,
+ iflag);
+ list_add(&sglq->list,
+ &phba->sli4_hba.lpfc_abts_els_sgl_list);
+ spin_unlock_irqrestore(
+ &phba->sli4_hba.abts_sgl_list_lock, iflag);
+ } else
+ list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+ }
+
+
+ /*
+ * Clean all volatile data fields, preserve iotag and node struct.
+ */
+ memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+ iocbq->sli4_xritag = NO_XRI;
+ list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
+ * __lpfc_sli_release_iocbq_s3 - Release iocb to the iocb pool
+ * @phba: Pointer to HBA context object.
+ * @iocbq: Pointer to driver iocb object.
+ *
+ * This function is called with hbalock held to release driver
+ * iocb object to the iocb pool. The iotag in the iocb object
+ * does not change for each use of the iocb object. This function
+ * clears all other fields of the iocb object when it is freed.
+ **/
+static void
+__lpfc_sli_release_iocbq_s3(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
+{
+ size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
+
+ /*
+ * Clean all volatile data fields, preserve iotag and node struct.
+ */
+ memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
+ iocbq->sli4_xritag = NO_XRI;
+ list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+}
+
+/**
* __lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
@@ -154,13 +630,7 @@
static void
__lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
{
- size_t start_clean = offsetof(struct lpfc_iocbq, iocb);
-
- /*
- * Clean all volatile data fields, preserve iotag and node struct.
- */
- memset((char*)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean);
- list_add_tail(&iocbq->list, &phba->lpfc_iocb_list);
+ phba->__lpfc_sli_release_iocbq(phba, iocbq);
}
/**
@@ -281,6 +751,14 @@
case CMD_GEN_REQUEST64_CR:
case CMD_GEN_REQUEST64_CX:
case CMD_XMIT_ELS_RSP64_CX:
+ case DSSCMD_IWRITE64_CR:
+ case DSSCMD_IWRITE64_CX:
+ case DSSCMD_IREAD64_CR:
+ case DSSCMD_IREAD64_CX:
+ case DSSCMD_INVALIDATE_DEK:
+ case DSSCMD_SET_KEK:
+ case DSSCMD_GET_KEK_ID:
+ case DSSCMD_GEN_XFER:
type = LPFC_SOL_IOCB;
break;
case CMD_ABORT_XRI_CN:
@@ -348,7 +826,7 @@
pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb)
return -ENOMEM;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
phba->link_state = LPFC_INIT_MBX_CMDS;
for (i = 0; i < psli->num_rings; i++) {
lpfc_config_ring(phba, i, pmb);
@@ -779,8 +1257,8 @@
phba->hbqs[i].buffer_count = 0;
}
/* Return all HBQ buffer that are in-fly */
- list_for_each_entry_safe(dmabuf, next_dmabuf,
- &phba->hbqbuf_in_list, list) {
+ list_for_each_entry_safe(dmabuf, next_dmabuf, &phba->rb_pend_list,
+ list) {
hbq_buf = container_of(dmabuf, struct hbq_dmabuf, dbuf);
list_del(&hbq_buf->dbuf.list);
if (hbq_buf->tag == -1) {
@@ -814,10 +1292,28 @@
* pointer to the hbq entry if it successfully post the buffer
* else it will return NULL.
**/
-static struct lpfc_hbq_entry *
+static int
lpfc_sli_hbq_to_firmware(struct lpfc_hba *phba, uint32_t hbqno,
struct hbq_dmabuf *hbq_buf)
{
+ return phba->lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buf);
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s3 - Post the hbq buffer to SLI3 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post a hbq buffer to the
+ * firmware. If the function finds an empty slot in the HBQ, it will post the
+ * buffer and place it on the hbq_buffer_list. The function will return zero if
+ * it successfully post the buffer else it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s3(struct lpfc_hba *phba, uint32_t hbqno,
+ struct hbq_dmabuf *hbq_buf)
+{
struct lpfc_hbq_entry *hbqe;
dma_addr_t physaddr = hbq_buf->dbuf.phys;
@@ -838,8 +1334,40 @@
/* flush */
readl(phba->hbq_put + hbqno);
list_add_tail(&hbq_buf->dbuf.list, &hbqp->hbq_buffer_list);
- }
- return hbqe;
+ return 0;
+ } else
+ return -ENOMEM;
+}
+
+/**
+ * lpfc_sli_hbq_to_firmware_s4 - Post the hbq buffer to SLI4 firmware
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ * @hbq_buf: Pointer to HBQ buffer.
+ *
+ * This function is called with the hbalock held to post an RQE to the SLI4
+ * firmware. If able to post the RQE to the RQ it will queue the hbq entry to
+ * the hbq_buffer_list and return zero, otherwise it will return an error.
+ **/
+static int
+lpfc_sli_hbq_to_firmware_s4(struct lpfc_hba *phba, uint32_t hbqno,
+ struct hbq_dmabuf *hbq_buf)
+{
+ int rc;
+ struct lpfc_rqe hrqe;
+ struct lpfc_rqe drqe;
+
+ hrqe.address_lo = putPaddrLow(hbq_buf->hbuf.phys);
+ hrqe.address_hi = putPaddrHigh(hbq_buf->hbuf.phys);
+ drqe.address_lo = putPaddrLow(hbq_buf->dbuf.phys);
+ drqe.address_hi = putPaddrHigh(hbq_buf->dbuf.phys);
+ rc = lpfc_sli4_rq_put(phba->sli4_hba.hdr_rq, phba->sli4_hba.dat_rq,
+ &hrqe, &drqe);
+ if (rc < 0)
+ return rc;
+ hbq_buf->tag = rc;
+ list_add_tail(&hbq_buf->dbuf.list, &phba->hbqs[hbqno].hbq_buffer_list);
+ return 0;
}
/* HBQ for ELS and CT traffic. */
@@ -914,7 +1442,7 @@
dbuf.list);
hbq_buffer->tag = (phba->hbqs[hbqno].buffer_count |
(hbqno << 16));
- if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+ if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
phba->hbqs[hbqno].buffer_count++;
posted++;
} else
@@ -965,6 +1493,25 @@
}
/**
+ * lpfc_sli_hbqbuf_get - Remove the first hbq off of an hbq list
+ * @phba: Pointer to HBA context object.
+ * @hbqno: HBQ number.
+ *
+ * This function removes the first hbq buffer on an hbq list and returns a
+ * pointer to that buffer. If it finds no buffers on the list it returns NULL.
+ **/
+static struct hbq_dmabuf *
+lpfc_sli_hbqbuf_get(struct list_head *rb_list)
+{
+ struct lpfc_dmabuf *d_buf;
+
+ list_remove_head(rb_list, d_buf, struct lpfc_dmabuf, list);
+ if (!d_buf)
+ return NULL;
+ return container_of(d_buf, struct hbq_dmabuf, dbuf);
+}
+
+/**
* lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
* @phba: Pointer to HBA context object.
* @tag: Tag of the hbq buffer.
@@ -985,12 +1532,15 @@
if (hbqno >= LPFC_MAX_HBQS)
return NULL;
+ spin_lock_irq(&phba->hbalock);
list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) {
hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
if (hbq_buf->tag == tag) {
+ spin_unlock_irq(&phba->hbalock);
return hbq_buf;
}
}
+ spin_unlock_irq(&phba->hbalock);
lpfc_printf_log(phba, KERN_ERR, LOG_SLI | LOG_VPORT,
"1803 Bad hbq tag. Data: x%x x%x\n",
tag, phba->hbqs[tag >> 16].buffer_count);
@@ -1013,9 +1563,8 @@
if (hbq_buffer) {
hbqno = hbq_buffer->tag >> 16;
- if (!lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer)) {
+ if (lpfc_sli_hbq_to_firmware(phba, hbqno, hbq_buffer))
(phba->hbqs[hbqno].hbq_free_buffer)(phba, hbq_buffer);
- }
}
}
@@ -1086,6 +1635,15 @@
case MBX_HEARTBEAT:
case MBX_PORT_CAPABILITIES:
case MBX_PORT_IOV_CONTROL:
+ case MBX_SLI4_CONFIG:
+ case MBX_SLI4_REQ_FTRS:
+ case MBX_REG_FCFI:
+ case MBX_UNREG_FCFI:
+ case MBX_REG_VFI:
+ case MBX_UNREG_VFI:
+ case MBX_INIT_VPI:
+ case MBX_INIT_VFI:
+ case MBX_RESUME_RPI:
ret = mbxCommand;
break;
default:
@@ -1106,7 +1664,7 @@
* will wake up thread waiting on the wait queue pointed by context1
* of the mailbox.
**/
-static void
+void
lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
{
wait_queue_head_t *pdone_q;
@@ -1140,7 +1698,7 @@
lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
{
struct lpfc_dmabuf *mp;
- uint16_t rpi;
+ uint16_t rpi, vpi;
int rc;
mp = (struct lpfc_dmabuf *) (pmb->context1);
@@ -1150,24 +1708,30 @@
kfree(mp);
}
+ if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
+ (phba->sli_rev == LPFC_SLI_REV4))
+ lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
+
/*
* If a REG_LOGIN succeeded after node is destroyed or node
* is in re-discovery driver need to cleanup the RPI.
*/
if (!(phba->pport->load_flag & FC_UNLOADING) &&
- pmb->mb.mbxCommand == MBX_REG_LOGIN64 &&
- !pmb->mb.mbxStatus) {
-
- rpi = pmb->mb.un.varWords[0];
- lpfc_unreg_login(phba, pmb->mb.un.varRegLogin.vpi, rpi, pmb);
+ pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 &&
+ !pmb->u.mb.mbxStatus) {
+ rpi = pmb->u.mb.un.varWords[0];
+ vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base;
+ lpfc_unreg_login(phba, vpi, rpi, pmb);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
if (rc != MBX_NOT_FINISHED)
return;
}
- mempool_free(pmb, phba->mbox_mem_pool);
- return;
+ if (bf_get(lpfc_mqe_command, &pmb->u.mqe) == MBX_SLI4_CONFIG)
+ lpfc_sli4_mbox_cmd_free(phba, pmb);
+ else
+ mempool_free(pmb, phba->mbox_mem_pool);
}
/**
@@ -1204,7 +1768,7 @@
if (pmb == NULL)
break;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
if (pmbox->mbxCommand != MBX_HEARTBEAT) {
if (pmb->vport) {
@@ -1233,9 +1797,10 @@
/* Unknow mailbox command compl */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"(%d):0323 Unknown Mailbox command "
- "%x Cmpl\n",
+ "x%x (x%x) Cmpl\n",
pmb->vport ? pmb->vport->vpi : 0,
- pmbox->mbxCommand);
+ pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, pmb));
phba->link_state = LPFC_HBA_ERROR;
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
@@ -1250,29 +1815,29 @@
LOG_MBOX | LOG_SLI,
"(%d):0305 Mbox cmd cmpl "
"error - RETRYing Data: x%x "
- "x%x x%x x%x\n",
+ "(x%x) x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi :0,
pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba,
+ pmb),
pmbox->mbxStatus,
pmbox->un.varWords[0],
pmb->vport->port_state);
pmbox->mbxStatus = 0;
pmbox->mbxOwner = OWN_HOST;
- spin_lock_irq(&phba->hbalock);
- phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- spin_unlock_irq(&phba->hbalock);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
- if (rc == MBX_SUCCESS)
+ if (rc != MBX_NOT_FINISHED)
continue;
}
}
/* Mailbox cmd <cmd> Cmpl <cmpl> */
lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
- "(%d):0307 Mailbox cmd x%x Cmpl x%p "
+ "(%d):0307 Mailbox cmd x%x (x%x) Cmpl x%p "
"Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x\n",
pmb->vport ? pmb->vport->vpi : 0,
pmbox->mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, pmb),
pmb->mbox_cmpl,
*((uint32_t *) pmbox),
pmbox->un.varWords[0],
@@ -1317,6 +1882,45 @@
return &hbq_entry->dbuf;
}
+/**
+ * lpfc_complete_unsol_iocb - Complete an unsolicited sequence
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @saveq: Pointer to the iocbq struct representing the sequence starting frame.
+ * @fch_r_ctl: the r_ctl for the first frame of the sequence.
+ * @fch_type: the type for the first frame of the sequence.
+ *
+ * This function is called with no lock held. This function uses the r_ctl and
+ * type of the received sequence to find the correct callback function to call
+ * to process the sequence.
+ **/
+static int
+lpfc_complete_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ struct lpfc_iocbq *saveq, uint32_t fch_r_ctl,
+ uint32_t fch_type)
+{
+ int i;
+
+ /* unSolicited Responses */
+ if (pring->prt[0].profile) {
+ if (pring->prt[0].lpfc_sli_rcv_unsol_event)
+ (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
+ saveq);
+ return 1;
+ }
+ /* We must search, based on rctl / type
+ for the right routine */
+ for (i = 0; i < pring->num_mask; i++) {
+ if ((pring->prt[i].rctl == fch_r_ctl) &&
+ (pring->prt[i].type == fch_type)) {
+ if (pring->prt[i].lpfc_sli_rcv_unsol_event)
+ (pring->prt[i].lpfc_sli_rcv_unsol_event)
+ (phba, pring, saveq);
+ return 1;
+ }
+ }
+ return 0;
+}
/**
* lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
@@ -1339,7 +1943,7 @@
IOCB_t * irsp;
WORD5 * w5p;
uint32_t Rctl, Type;
- uint32_t match, i;
+ uint32_t match;
struct lpfc_iocbq *iocbq;
struct lpfc_dmabuf *dmzbuf;
@@ -1482,35 +2086,12 @@
}
}
- /* unSolicited Responses */
- if (pring->prt[0].profile) {
- if (pring->prt[0].lpfc_sli_rcv_unsol_event)
- (pring->prt[0].lpfc_sli_rcv_unsol_event) (phba, pring,
- saveq);
- match = 1;
- } else {
- /* We must search, based on rctl / type
- for the right routine */
- for (i = 0; i < pring->num_mask; i++) {
- if ((pring->prt[i].rctl == Rctl)
- && (pring->prt[i].type == Type)) {
- if (pring->prt[i].lpfc_sli_rcv_unsol_event)
- (pring->prt[i].lpfc_sli_rcv_unsol_event)
- (phba, pring, saveq);
- match = 1;
- break;
- }
- }
- }
- if (match == 0) {
- /* Unexpected Rctl / Type received */
- /* Ring <ringno> handler: unexpected
- Rctl <Rctl> Type <Type> received */
+ if (!lpfc_complete_unsol_iocb(phba, pring, saveq, Rctl, Type))
lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0313 Ring %d handler: unexpected Rctl x%x "
"Type x%x received\n",
pring->ringno, Rctl, Type);
- }
+
return 1;
}
@@ -1552,6 +2133,37 @@
}
/**
+ * lpfc_sli_iocbq_lookup_by_tag - Find command iocb for the iotag
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @iotag: IOCB tag.
+ *
+ * This function looks up the iocb_lookup table to get the command iocb
+ * corresponding to the given iotag. This function is called with the
+ * hbalock held.
+ * This function returns the command iocb object if it finds the command
+ * iocb else returns NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_iocbq_lookup_by_tag(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint16_t iotag)
+{
+ struct lpfc_iocbq *cmd_iocb;
+
+ if (iotag != 0 && iotag <= phba->sli.last_iotag) {
+ cmd_iocb = phba->sli.iocbq_lookup[iotag];
+ list_del_init(&cmd_iocb->list);
+ pring->txcmplq_cnt--;
+ return cmd_iocb;
+ }
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0372 iotag x%x is out off range: max iotag (x%x)\n",
+ iotag, phba->sli.last_iotag);
+ return NULL;
+}
+
+/**
* lpfc_sli_process_sol_iocb - process solicited iocb completion
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
@@ -1954,7 +2566,7 @@
if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
(irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
spin_unlock_irqrestore(&phba->hbalock, iflag);
- lpfc_rampdown_queue_depth(phba);
+ phba->lpfc_rampdown_queue_depth(phba);
spin_lock_irqsave(&phba->hbalock, iflag);
}
@@ -2068,39 +2680,215 @@
}
/**
- * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
+ * lpfc_sli_sp_handle_rspiocb - Handle slow-path response iocb
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @rspiocbp: Pointer to driver response IOCB object.
+ *
+ * This function is called from the worker thread when there is a slow-path
+ * response IOCB to process. This function chains all the response iocbs until
+ * seeing the iocb with the LE bit set. The function will call
+ * lpfc_sli_process_sol_iocb function if the response iocb indicates a
+ * completion of a command iocb. The function will call the
+ * lpfc_sli_process_unsol_iocb function if this is an unsolicited iocb.
+ * The function frees the resources or calls the completion handler if this
+ * iocb is an abort completion. The function returns NULL when the response
+ * iocb has the LE bit set and all the chained iocbs are processed, otherwise
+ * this function shall chain the iocb on to the iocb_continueq and return the
+ * response iocb passed in.
+ **/
+static struct lpfc_iocbq *
+lpfc_sli_sp_handle_rspiocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+ struct lpfc_iocbq *rspiocbp)
+{
+ struct lpfc_iocbq *saveq;
+ struct lpfc_iocbq *cmdiocbp;
+ struct lpfc_iocbq *next_iocb;
+ IOCB_t *irsp = NULL;
+ uint32_t free_saveq;
+ uint8_t iocb_cmd_type;
+ lpfc_iocb_type type;
+ unsigned long iflag;
+ int rc;
+
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ /* First add the response iocb to the countinueq list */
+ list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
+ pring->iocb_continueq_cnt++;
+
+ /* Now, determine whetehr the list is completed for processing */
+ irsp = &rspiocbp->iocb;
+ if (irsp->ulpLe) {
+ /*
+ * By default, the driver expects to free all resources
+ * associated with this iocb completion.
+ */
+ free_saveq = 1;
+ saveq = list_get_first(&pring->iocb_continueq,
+ struct lpfc_iocbq, list);
+ irsp = &(saveq->iocb);
+ list_del_init(&pring->iocb_continueq);
+ pring->iocb_continueq_cnt = 0;
+
+ pring->stats.iocb_rsp++;
+
+ /*
+ * If resource errors reported from HBA, reduce
+ * queuedepths of the SCSI device.
+ */
+ if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
+ (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ phba->lpfc_rampdown_queue_depth(phba);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ }
+
+ if (irsp->ulpStatus) {
+ /* Rsp ring <ringno> error: IOCB */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0328 Rsp Ring %d error: "
+ "IOCB Data: "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x "
+ "x%x x%x x%x x%x\n",
+ pring->ringno,
+ irsp->un.ulpWord[0],
+ irsp->un.ulpWord[1],
+ irsp->un.ulpWord[2],
+ irsp->un.ulpWord[3],
+ irsp->un.ulpWord[4],
+ irsp->un.ulpWord[5],
+ *(((uint32_t *) irsp) + 6),
+ *(((uint32_t *) irsp) + 7),
+ *(((uint32_t *) irsp) + 8),
+ *(((uint32_t *) irsp) + 9),
+ *(((uint32_t *) irsp) + 10),
+ *(((uint32_t *) irsp) + 11),
+ *(((uint32_t *) irsp) + 12),
+ *(((uint32_t *) irsp) + 13),
+ *(((uint32_t *) irsp) + 14),
+ *(((uint32_t *) irsp) + 15));
+ }
+
+ /*
+ * Fetch the IOCB command type and call the correct completion
+ * routine. Solicited and Unsolicited IOCBs on the ELS ring
+ * get freed back to the lpfc_iocb_list by the discovery
+ * kernel thread.
+ */
+ iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
+ type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
+ switch (type) {
+ case LPFC_SOL_IOCB:
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ rc = lpfc_sli_process_sol_iocb(phba, pring, saveq);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ break;
+
+ case LPFC_UNSOL_IOCB:
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ rc = lpfc_sli_process_unsol_iocb(phba, pring, saveq);
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (!rc)
+ free_saveq = 0;
+ break;
+
+ case LPFC_ABORT_IOCB:
+ cmdiocbp = NULL;
+ if (irsp->ulpCommand != CMD_XRI_ABORTED_CX)
+ cmdiocbp = lpfc_sli_iocbq_lookup(phba, pring,
+ saveq);
+ if (cmdiocbp) {
+ /* Call the specified completion routine */
+ if (cmdiocbp->iocb_cmpl) {
+ spin_unlock_irqrestore(&phba->hbalock,
+ iflag);
+ (cmdiocbp->iocb_cmpl)(phba, cmdiocbp,
+ saveq);
+ spin_lock_irqsave(&phba->hbalock,
+ iflag);
+ } else
+ __lpfc_sli_release_iocbq(phba,
+ cmdiocbp);
+ }
+ break;
+
+ case LPFC_UNKNOWN_IOCB:
+ if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
+ char adaptermsg[LPFC_MAX_ADPTMSG];
+ memset(adaptermsg, 0, LPFC_MAX_ADPTMSG);
+ memcpy(&adaptermsg[0], (uint8_t *)irsp,
+ MAX_MSG_DATA);
+ dev_warn(&((phba->pcidev)->dev),
+ "lpfc%d: %s\n",
+ phba->brd_no, adaptermsg);
+ } else {
+ /* Unknown IOCB command */
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0335 Unknown IOCB "
+ "command Data: x%x "
+ "x%x x%x x%x\n",
+ irsp->ulpCommand,
+ irsp->ulpStatus,
+ irsp->ulpIoTag,
+ irsp->ulpContext);
+ }
+ break;
+ }
+
+ if (free_saveq) {
+ list_for_each_entry_safe(rspiocbp, next_iocb,
+ &saveq->list, list) {
+ list_del(&rspiocbp->list);
+ __lpfc_sli_release_iocbq(phba, rspiocbp);
+ }
+ __lpfc_sli_release_iocbq(phba, saveq);
+ }
+ rspiocbp = NULL;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return rspiocbp;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event - Wrapper func for handling slow-path iocbs
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
*
- * This function is called from the worker thread when there is a ring
- * event for non-fcp rings. The caller does not hold any lock .
- * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
- * LE bit set. The function will call lpfc_sli_process_sol_iocb function if the
- * response iocb indicates a completion of a command iocb. The function
- * will call lpfc_sli_process_unsol_iocb function if this is an unsolicited
- * iocb. The function frees the resources or calls the completion handler if
- * this iocb is an abort completion. The function returns 0 when the allocated
- * iocbs are not freed, otherwise returns 1.
+ * This routine wraps the actual slow_ring event process routine from the
+ * API jump table function pointer from the lpfc_hba struct.
**/
-int
+void
lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
struct lpfc_sli_ring *pring, uint32_t mask)
{
+ phba->lpfc_sli_handle_slow_ring_event(phba, pring, mask);
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s3 - Handle SLI3 ring event for non-FCP rings
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a ring event
+ * for non-fcp rings. The caller does not hold any lock. The function will
+ * remove each response iocb in the response ring and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s3(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint32_t mask)
+{
struct lpfc_pgp *pgp;
IOCB_t *entry;
IOCB_t *irsp = NULL;
struct lpfc_iocbq *rspiocbp = NULL;
- struct lpfc_iocbq *next_iocb;
- struct lpfc_iocbq *cmdiocbp;
- struct lpfc_iocbq *saveq;
- uint8_t iocb_cmd_type;
- lpfc_iocb_type type;
- uint32_t status, free_saveq;
uint32_t portRspPut, portRspMax;
- int rc = 1;
unsigned long iflag;
+ uint32_t status;
pgp = &phba->port_gp[pring->ringno];
spin_lock_irqsave(&phba->hbalock, iflag);
@@ -2128,7 +2916,7 @@
phba->work_hs = HS_FFER3;
lpfc_handle_eratt(phba);
- return 1;
+ return;
}
rmb();
@@ -2173,138 +2961,10 @@
writel(pring->rspidx, &phba->host_gp[pring->ringno].rspGetInx);
- list_add_tail(&rspiocbp->list, &(pring->iocb_continueq));
-
- pring->iocb_continueq_cnt++;
- if (irsp->ulpLe) {
- /*
- * By default, the driver expects to free all resources
- * associated with this iocb completion.
- */
- free_saveq = 1;
- saveq = list_get_first(&pring->iocb_continueq,
- struct lpfc_iocbq, list);
- irsp = &(saveq->iocb);
- list_del_init(&pring->iocb_continueq);
- pring->iocb_continueq_cnt = 0;
-
- pring->stats.iocb_rsp++;
-
- /*
- * If resource errors reported from HBA, reduce
- * queuedepths of the SCSI device.
- */
- if ((irsp->ulpStatus == IOSTAT_LOCAL_REJECT) &&
- (irsp->un.ulpWord[4] == IOERR_NO_RESOURCES)) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- lpfc_rampdown_queue_depth(phba);
- spin_lock_irqsave(&phba->hbalock, iflag);
- }
-
- if (irsp->ulpStatus) {
- /* Rsp ring <ringno> error: IOCB */
- lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
- "0328 Rsp Ring %d error: "
- "IOCB Data: "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x "
- "x%x x%x x%x x%x\n",
- pring->ringno,
- irsp->un.ulpWord[0],
- irsp->un.ulpWord[1],
- irsp->un.ulpWord[2],
- irsp->un.ulpWord[3],
- irsp->un.ulpWord[4],
- irsp->un.ulpWord[5],
- *(((uint32_t *) irsp) + 6),
- *(((uint32_t *) irsp) + 7),
- *(((uint32_t *) irsp) + 8),
- *(((uint32_t *) irsp) + 9),
- *(((uint32_t *) irsp) + 10),
- *(((uint32_t *) irsp) + 11),
- *(((uint32_t *) irsp) + 12),
- *(((uint32_t *) irsp) + 13),
- *(((uint32_t *) irsp) + 14),
- *(((uint32_t *) irsp) + 15));
- }
-
- /*
- * Fetch the IOCB command type and call the correct
- * completion routine. Solicited and Unsolicited
- * IOCBs on the ELS ring get freed back to the
- * lpfc_iocb_list by the discovery kernel thread.
- */
- iocb_cmd_type = irsp->ulpCommand & CMD_IOCB_MASK;
- type = lpfc_sli_iocb_cmd_type(iocb_cmd_type);
- if (type == LPFC_SOL_IOCB) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- rc = lpfc_sli_process_sol_iocb(phba, pring,
- saveq);
- spin_lock_irqsave(&phba->hbalock, iflag);
- } else if (type == LPFC_UNSOL_IOCB) {
- spin_unlock_irqrestore(&phba->hbalock, iflag);
- rc = lpfc_sli_process_unsol_iocb(phba, pring,
- saveq);
- spin_lock_irqsave(&phba->hbalock, iflag);
- if (!rc)
- free_saveq = 0;
- } else if (type == LPFC_ABORT_IOCB) {
- if ((irsp->ulpCommand != CMD_XRI_ABORTED_CX) &&
- ((cmdiocbp =
- lpfc_sli_iocbq_lookup(phba, pring,
- saveq)))) {
- /* Call the specified completion
- routine */
- if (cmdiocbp->iocb_cmpl) {
- spin_unlock_irqrestore(
- &phba->hbalock,
- iflag);
- (cmdiocbp->iocb_cmpl) (phba,
- cmdiocbp, saveq);
- spin_lock_irqsave(
- &phba->hbalock,
- iflag);
- } else
- __lpfc_sli_release_iocbq(phba,
- cmdiocbp);
- }
- } else if (type == LPFC_UNKNOWN_IOCB) {
- if (irsp->ulpCommand == CMD_ADAPTER_MSG) {
-
- char adaptermsg[LPFC_MAX_ADPTMSG];
-
- memset(adaptermsg, 0,
- LPFC_MAX_ADPTMSG);
- memcpy(&adaptermsg[0], (uint8_t *) irsp,
- MAX_MSG_DATA);
- dev_warn(&((phba->pcidev)->dev),
- "lpfc%d: %s\n",
- phba->brd_no, adaptermsg);
- } else {
- /* Unknown IOCB command */
- lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
- "0335 Unknown IOCB "
- "command Data: x%x "
- "x%x x%x x%x\n",
- irsp->ulpCommand,
- irsp->ulpStatus,
- irsp->ulpIoTag,
- irsp->ulpContext);
- }
- }
-
- if (free_saveq) {
- list_for_each_entry_safe(rspiocbp, next_iocb,
- &saveq->list, list) {
- list_del(&rspiocbp->list);
- __lpfc_sli_release_iocbq(phba,
- rspiocbp);
- }
- __lpfc_sli_release_iocbq(phba, saveq);
- }
- rspiocbp = NULL;
- }
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ /* Handle the response IOCB */
+ rspiocbp = lpfc_sli_sp_handle_rspiocb(phba, pring, rspiocbp);
+ spin_lock_irqsave(&phba->hbalock, iflag);
/*
* If the port response put pointer has not been updated, sync
@@ -2338,7 +2998,37 @@
}
spin_unlock_irqrestore(&phba->hbalock, iflag);
- return rc;
+ return;
+}
+
+/**
+ * lpfc_sli_handle_slow_ring_event_s4 - Handle SLI4 slow-path els events
+ * @phba: Pointer to HBA context object.
+ * @pring: Pointer to driver SLI ring object.
+ * @mask: Host attention register mask for this ring.
+ *
+ * This function is called from the worker thread when there is a pending
+ * ELS response iocb on the driver internal slow-path response iocb worker
+ * queue. The caller does not hold any lock. The function will remove each
+ * response iocb from the response worker queue and calls the handle
+ * response iocb routine (lpfc_sli_sp_handle_rspiocb) to process it.
+ **/
+static void
+lpfc_sli_handle_slow_ring_event_s4(struct lpfc_hba *phba,
+ struct lpfc_sli_ring *pring, uint32_t mask)
+{
+ struct lpfc_iocbq *irspiocbq;
+ unsigned long iflag;
+
+ while (!list_empty(&phba->sli4_hba.sp_rspiocb_work_queue)) {
+ /* Get the response iocb from the head of work queue */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ list_remove_head(&phba->sli4_hba.sp_rspiocb_work_queue,
+ irspiocbq, struct lpfc_iocbq, list);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ /* Process the response iocb */
+ lpfc_sli_sp_handle_rspiocb(phba, pring, irspiocbq);
+ }
}
/**
@@ -2420,7 +3110,7 @@
}
/**
- * lpfc_sli_brdready - Check for host status bits
+ * lpfc_sli_brdready_s3 - Check for sli3 host ready status
* @phba: Pointer to HBA context object.
* @mask: Bit mask to be checked.
*
@@ -2432,8 +3122,8 @@
* function returns 1 when HBA fail to restart otherwise returns
* zero.
**/
-int
-lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+static int
+lpfc_sli_brdready_s3(struct lpfc_hba *phba, uint32_t mask)
{
uint32_t status;
int i = 0;
@@ -2477,6 +3167,56 @@
return retval;
}
+/**
+ * lpfc_sli_brdready_s4 - Check for sli4 host ready status
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This function checks the host status register to check if HBA is
+ * ready. This function will wait in a loop for the HBA to be ready
+ * If the HBA is not ready , the function will will reset the HBA PCI
+ * function again. The function returns 1 when HBA fail to be ready
+ * otherwise returns zero.
+ **/
+static int
+lpfc_sli_brdready_s4(struct lpfc_hba *phba, uint32_t mask)
+{
+ uint32_t status;
+ int retval = 0;
+
+ /* Read the HBA Host Status Register */
+ status = lpfc_sli4_post_status_check(phba);
+
+ if (status) {
+ phba->pport->port_state = LPFC_VPORT_UNKNOWN;
+ lpfc_sli_brdrestart(phba);
+ status = lpfc_sli4_post_status_check(phba);
+ }
+
+ /* Check to see if any errors occurred during init */
+ if (status) {
+ phba->link_state = LPFC_HBA_ERROR;
+ retval = 1;
+ } else
+ phba->sli4_hba.intr_enable = 0;
+
+ return retval;
+}
+
+/**
+ * lpfc_sli_brdready - Wrapper func for checking the hba readyness
+ * @phba: Pointer to HBA context object.
+ * @mask: Bit mask to be checked.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba readyness check routine
+ * from the API jump table function pointer from the lpfc_hba struct.
+ **/
+int
+lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
+{
+ return phba->lpfc_sli_brdready(phba, mask);
+}
+
#define BARRIER_TEST_PATTERN (0xdeadbeef)
/**
@@ -2532,7 +3272,7 @@
mdelay(1);
if (readl(resp_buf + 1) != ~(BARRIER_TEST_PATTERN)) {
- if (phba->sli.sli_flag & LPFC_SLI2_ACTIVE ||
+ if (phba->sli.sli_flag & LPFC_SLI_ACTIVE ||
phba->pport->stopped)
goto restore_hc;
else
@@ -2613,7 +3353,9 @@
return 1;
}
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
mempool_free(pmb, phba->mbox_mem_pool);
@@ -2636,10 +3378,10 @@
}
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ psli->mbox_active = NULL;
phba->link_flag &= ~LS_IGNORE_ERATT;
spin_unlock_irq(&phba->hbalock);
- psli->mbox_active = NULL;
lpfc_hba_down_post(phba);
phba->link_state = LPFC_HBA_ERROR;
@@ -2647,7 +3389,7 @@
}
/**
- * lpfc_sli_brdreset - Reset the HBA
+ * lpfc_sli_brdreset - Reset a sli-2 or sli-3 HBA
* @phba: Pointer to HBA context object.
*
* This function resets the HBA by writing HC_INITFF to the control
@@ -2683,7 +3425,8 @@
(cfg_value &
~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
- psli->sli_flag &= ~(LPFC_SLI2_ACTIVE | LPFC_PROCESS_LA);
+ psli->sli_flag &= ~(LPFC_SLI_ACTIVE | LPFC_PROCESS_LA);
+
/* Now toggle INITFF bit in the Host Control Register */
writel(HC_INITFF, phba->HCregaddr);
mdelay(1);
@@ -2710,7 +3453,66 @@
}
/**
- * lpfc_sli_brdrestart - Restart the HBA
+ * lpfc_sli4_brdreset - Reset a sli-4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function resets a SLI4 HBA. This function disables PCI layer parity
+ * checking during resets the device. The caller is not required to hold
+ * any locks.
+ *
+ * This function returns 0 always.
+ **/
+int
+lpfc_sli4_brdreset(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ uint16_t cfg_value;
+ uint8_t qindx;
+
+ /* Reset HBA */
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0295 Reset HBA Data: x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag);
+
+ /* perform board reset */
+ phba->fc_eventTag = 0;
+ phba->pport->fc_myDID = 0;
+ phba->pport->fc_prevDID = 0;
+
+ /* Turn off parity checking and serr during the physical reset */
+ pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+ pci_write_config_word(phba->pcidev, PCI_COMMAND,
+ (cfg_value &
+ ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~(LPFC_PROCESS_LA);
+ phba->fcf.fcf_flag = 0;
+ /* Clean up the child queue list for the CQs */
+ list_del_init(&phba->sli4_hba.mbx_wq->list);
+ list_del_init(&phba->sli4_hba.els_wq->list);
+ list_del_init(&phba->sli4_hba.hdr_rq->list);
+ list_del_init(&phba->sli4_hba.dat_rq->list);
+ list_del_init(&phba->sli4_hba.mbx_cq->list);
+ list_del_init(&phba->sli4_hba.els_cq->list);
+ list_del_init(&phba->sli4_hba.rxq_cq->list);
+ for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++)
+ list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list);
+ for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++)
+ list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Now physically reset the device */
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0389 Performing PCI function reset!\n");
+ /* Perform FCoE PCI function reset */
+ lpfc_pci_function_reset(phba);
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart_s3 - Restart a sli-3 hba
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI initialization code path to
@@ -2722,8 +3524,8 @@
* The function does not guarantee completion of MBX_RESTART mailbox
* command before the return of this function.
**/
-int
-lpfc_sli_brdrestart(struct lpfc_hba *phba)
+static int
+lpfc_sli_brdrestart_s3(struct lpfc_hba *phba)
{
MAILBOX_t *mb;
struct lpfc_sli *psli;
@@ -2762,7 +3564,7 @@
lpfc_sli_brdreset(phba);
phba->pport->stopped = 0;
phba->link_state = LPFC_INIT_START;
-
+ phba->hba_flag = 0;
spin_unlock_irq(&phba->hbalock);
memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
@@ -2777,6 +3579,55 @@
}
/**
+ * lpfc_sli_brdrestart_s4 - Restart the sli-4 hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called in the SLI initialization code path to restart
+ * a SLI4 HBA. The caller is not required to hold any lock.
+ * At the end of the function, it calls lpfc_hba_down_post function to
+ * free any pending commands.
+ **/
+static int
+lpfc_sli_brdrestart_s4(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+
+
+ /* Restart HBA */
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0296 Restart HBA Data: x%x x%x\n",
+ phba->pport->port_state, psli->sli_flag);
+
+ lpfc_sli4_brdreset(phba);
+
+ spin_lock_irq(&phba->hbalock);
+ phba->pport->stopped = 0;
+ phba->link_state = LPFC_INIT_START;
+ phba->hba_flag = 0;
+ spin_unlock_irq(&phba->hbalock);
+
+ memset(&psli->lnk_stat_offsets, 0, sizeof(psli->lnk_stat_offsets));
+ psli->stats_start = get_seconds();
+
+ lpfc_hba_down_post(phba);
+
+ return 0;
+}
+
+/**
+ * lpfc_sli_brdrestart - Wrapper func for restarting hba
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine wraps the actual SLI3 or SLI4 hba restart routine from the
+ * API jump table function pointer from the lpfc_hba struct.
+**/
+int
+lpfc_sli_brdrestart(struct lpfc_hba *phba)
+{
+ return phba->lpfc_sli_brdrestart(phba);
+}
+
+/**
* lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
* @phba: Pointer to HBA context object.
*
@@ -2940,7 +3791,7 @@
if (!pmb)
return -ENOMEM;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
/* Initialize the struct lpfc_sli_hbq structure for each hbq */
phba->link_state = LPFC_INIT_MBX_CMDS;
@@ -2984,6 +3835,26 @@
}
/**
+ * lpfc_sli4_rb_setup - Initialize and post RBs to HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called during the SLI initialization to configure
+ * all the HBQs and post buffers to the HBQ. The caller is not
+ * required to hold any locks. This function will return zero if successful
+ * else it will return negative error code.
+ **/
+static int
+lpfc_sli4_rb_setup(struct lpfc_hba *phba)
+{
+ phba->hbq_in_use = 1;
+ phba->hbqs[0].entry_count = lpfc_hbq_defs[0]->entry_count;
+ phba->hbq_count = 1;
+ /* Initially populate or replenish the HBQs */
+ lpfc_sli_hbqbuf_init_hbqs(phba, 0);
+ return 0;
+}
+
+/**
* lpfc_sli_config_port - Issue config port mailbox command
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
@@ -3047,33 +3918,43 @@
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0442 Adapter failed to init, mbxCmd x%x "
"CONFIG_PORT, mbxStatus x%x Data: x%x\n",
- pmb->mb.mbxCommand, pmb->mb.mbxStatus, 0);
+ pmb->u.mb.mbxCommand, pmb->u.mb.mbxStatus, 0);
spin_lock_irq(&phba->hbalock);
- phba->sli.sli_flag &= ~LPFC_SLI2_ACTIVE;
+ phba->sli.sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
rc = -ENXIO;
- } else
+ } else {
+ /* Allow asynchronous mailbox command to go through */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
done = 1;
+ }
}
if (!done) {
rc = -EINVAL;
goto do_prep_failed;
}
- if (pmb->mb.un.varCfgPort.sli_mode == 3) {
- if (!pmb->mb.un.varCfgPort.cMA) {
+ if (pmb->u.mb.un.varCfgPort.sli_mode == 3) {
+ if (!pmb->u.mb.un.varCfgPort.cMA) {
rc = -ENXIO;
goto do_prep_failed;
}
- if (phba->max_vpi && pmb->mb.un.varCfgPort.gmv) {
+ if (phba->max_vpi && pmb->u.mb.un.varCfgPort.gmv) {
phba->sli3_options |= LPFC_SLI3_NPIV_ENABLED;
- phba->max_vpi = pmb->mb.un.varCfgPort.max_vpi;
+ phba->max_vpi = pmb->u.mb.un.varCfgPort.max_vpi;
+ phba->max_vports = (phba->max_vpi > phba->max_vports) ?
+ phba->max_vpi : phba->max_vports;
+
} else
phba->max_vpi = 0;
- if (pmb->mb.un.varCfgPort.gerbm)
+ if (pmb->u.mb.un.varCfgPort.gdss)
+ phba->sli3_options |= LPFC_SLI3_DSS_ENABLED;
+ if (pmb->u.mb.un.varCfgPort.gerbm)
phba->sli3_options |= LPFC_SLI3_HBQ_ENABLED;
- if (pmb->mb.un.varCfgPort.gcrp)
+ if (pmb->u.mb.un.varCfgPort.gcrp)
phba->sli3_options |= LPFC_SLI3_CRP_ENABLED;
- if (pmb->mb.un.varCfgPort.ginb) {
+ if (pmb->u.mb.un.varCfgPort.ginb) {
phba->sli3_options |= LPFC_SLI3_INB_ENABLED;
phba->hbq_get = phba->mbox->us.s3_inb_pgp.hbq_get;
phba->port_gp = phba->mbox->us.s3_inb_pgp.port;
@@ -3089,7 +3970,7 @@
}
if (phba->cfg_enable_bg) {
- if (pmb->mb.un.varCfgPort.gbg)
+ if (pmb->u.mb.un.varCfgPort.gbg)
phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
else
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -3184,8 +4065,9 @@
if (rc)
goto lpfc_sli_hba_setup_error;
}
-
+ spin_lock_irq(&phba->hbalock);
phba->sli.sli_flag |= LPFC_PROCESS_LA;
+ spin_unlock_irq(&phba->hbalock);
rc = lpfc_config_port_post(phba);
if (rc)
@@ -3200,6 +4082,488 @@
return rc;
}
+/**
+ * lpfc_sli4_read_fcoe_params - Read fcoe params from conf region
+ * @phba: Pointer to HBA context object.
+ * @mboxq: mailbox pointer.
+ * This function issue a dump mailbox command to read config region
+ * 23 and parse the records in the region and populate driver
+ * data structure.
+ **/
+static int
+lpfc_sli4_read_fcoe_params(struct lpfc_hba *phba,
+ LPFC_MBOXQ_t *mboxq)
+{
+ struct lpfc_dmabuf *mp;
+ struct lpfc_mqe *mqe;
+ uint32_t data_length;
+ int rc;
+
+ /* Program the default value of vlan_id and fc_map */
+ phba->valid_vlan = 0;
+ phba->fc_map[0] = LPFC_FCOE_FCF_MAP0;
+ phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
+ phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+
+ mqe = &mboxq->u.mqe;
+ if (lpfc_dump_fcoe_param(phba, mboxq))
+ return -ENOMEM;
+
+ mp = (struct lpfc_dmabuf *) mboxq->context1;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):2571 Mailbox cmd x%x Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ bf_get(lpfc_mqe_command, mqe),
+ bf_get(lpfc_mqe_status, mqe),
+ mqe->un.mb_words[0], mqe->un.mb_words[1],
+ mqe->un.mb_words[2], mqe->un.mb_words[3],
+ mqe->un.mb_words[4], mqe->un.mb_words[5],
+ mqe->un.mb_words[6], mqe->un.mb_words[7],
+ mqe->un.mb_words[8], mqe->un.mb_words[9],
+ mqe->un.mb_words[10], mqe->un.mb_words[11],
+ mqe->un.mb_words[12], mqe->un.mb_words[13],
+ mqe->un.mb_words[14], mqe->un.mb_words[15],
+ mqe->un.mb_words[16], mqe->un.mb_words[50],
+ mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+
+ if (rc) {
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ return -EIO;
+ }
+ data_length = mqe->un.mb_words[5];
+ if (data_length > DMP_FCOEPARAM_RGN_SIZE)
+ return -EIO;
+
+ lpfc_parse_fcoe_conf(phba, mp->virt, data_length);
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ return 0;
+}
+
+/**
+ * lpfc_sli4_read_rev - Issue READ_REV and collect vpd data
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to the LPFC_MBOXQ_t structure.
+ * @vpd: pointer to the memory to hold resulting port vpd data.
+ * @vpd_size: On input, the number of bytes allocated to @vpd.
+ * On output, the number of data bytes in @vpd.
+ *
+ * This routine executes a READ_REV SLI4 mailbox command. In
+ * addition, this routine gets the port vpd data.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - could not allocated memory.
+ **/
+static int
+lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+ uint8_t *vpd, uint32_t *vpd_size)
+{
+ int rc = 0;
+ uint32_t dma_size;
+ struct lpfc_dmabuf *dmabuf;
+ struct lpfc_mqe *mqe;
+
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ /*
+ * Get a DMA buffer for the vpd data resulting from the READ_REV
+ * mailbox command.
+ */
+ dma_size = *vpd_size;
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ dma_size,
+ &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ return -ENOMEM;
+ }
+ memset(dmabuf->virt, 0, dma_size);
+
+ /*
+ * The SLI4 implementation of READ_REV conflicts at word1,
+ * bits 31:16 and SLI4 adds vpd functionality not present
+ * in SLI3. This code corrects the conflicts.
+ */
+ lpfc_read_rev(phba, mboxq);
+ mqe = &mboxq->u.mqe;
+ mqe->un.read_rev.vpd_paddr_high = putPaddrHigh(dmabuf->phys);
+ mqe->un.read_rev.vpd_paddr_low = putPaddrLow(dmabuf->phys);
+ mqe->un.read_rev.word1 &= 0x0000FFFF;
+ bf_set(lpfc_mbx_rd_rev_vpd, &mqe->un.read_rev, 1);
+ bf_set(lpfc_mbx_rd_rev_avail_len, &mqe->un.read_rev, dma_size);
+
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc) {
+ dma_free_coherent(&phba->pcidev->dev, dma_size,
+ dmabuf->virt, dmabuf->phys);
+ return -EIO;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0380 Mailbox cmd x%x Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "x%x x%x x%x x%x x%x x%x x%x x%x x%x "
+ "CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ bf_get(lpfc_mqe_command, mqe),
+ bf_get(lpfc_mqe_status, mqe),
+ mqe->un.mb_words[0], mqe->un.mb_words[1],
+ mqe->un.mb_words[2], mqe->un.mb_words[3],
+ mqe->un.mb_words[4], mqe->un.mb_words[5],
+ mqe->un.mb_words[6], mqe->un.mb_words[7],
+ mqe->un.mb_words[8], mqe->un.mb_words[9],
+ mqe->un.mb_words[10], mqe->un.mb_words[11],
+ mqe->un.mb_words[12], mqe->un.mb_words[13],
+ mqe->un.mb_words[14], mqe->un.mb_words[15],
+ mqe->un.mb_words[16], mqe->un.mb_words[50],
+ mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+
+ /*
+ * The available vpd length cannot be bigger than the
+ * DMA buffer passed to the port. Catch the less than
+ * case and update the caller's size.
+ */
+ if (mqe->un.read_rev.avail_vpd_len < *vpd_size)
+ *vpd_size = mqe->un.read_rev.avail_vpd_len;
+
+ lpfc_sli_pcimem_bcopy(dmabuf->virt, vpd, *vpd_size);
+ dma_free_coherent(&phba->pcidev->dev, dma_size,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ return 0;
+}
+
+/**
+ * lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is called to explicitly arm the SLI4 device's completion and
+ * event queues
+ **/
+static void
+lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba)
+{
+ uint8_t fcp_eqidx;
+
+ lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM);
+ lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM);
+ lpfc_sli4_cq_release(phba->sli4_hba.rxq_cq, LPFC_QUEUE_REARM);
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+ lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx],
+ LPFC_QUEUE_REARM);
+ lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM);
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++)
+ lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx],
+ LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_hba_setup - SLI4 device intialization PCI function
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is the main SLI4 device intialization PCI function. This
+ * function is called by the HBA intialization code, HBA reset code and
+ * HBA error attention handler code. Caller is not required to hold any
+ * locks.
+ **/
+int
+lpfc_sli4_hba_setup(struct lpfc_hba *phba)
+{
+ int rc;
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mqe *mqe;
+ uint8_t *vpd;
+ uint32_t vpd_size;
+ uint32_t ftr_rsp = 0;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(phba->pport);
+ struct lpfc_vport *vport = phba->pport;
+ struct lpfc_dmabuf *mp;
+
+ /* Perform a PCI function reset to start from clean */
+ rc = lpfc_pci_function_reset(phba);
+ if (unlikely(rc))
+ return -ENODEV;
+
+ /* Check the HBA Host Status Register for readyness */
+ rc = lpfc_sli4_post_status_check(phba);
+ if (unlikely(rc))
+ return -ENODEV;
+ else {
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag |= LPFC_SLI_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+ }
+
+ /*
+ * Allocate a single mailbox container for initializing the
+ * port.
+ */
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /*
+ * Continue initialization with default values even if driver failed
+ * to read FCoE param config regions
+ */
+ if (lpfc_sli4_read_fcoe_params(phba, mboxq))
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT,
+ "2570 Failed to read FCoE parameters \n");
+
+ /* Issue READ_REV to collect vpd and FW information. */
+ vpd_size = PAGE_SIZE;
+ vpd = kzalloc(vpd_size, GFP_KERNEL);
+ if (!vpd) {
+ rc = -ENOMEM;
+ goto out_free_mbox;
+ }
+
+ rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
+ if (unlikely(rc))
+ goto out_free_vpd;
+
+ mqe = &mboxq->u.mqe;
+ if ((bf_get(lpfc_mbx_rd_rev_sli_lvl,
+ &mqe->un.read_rev) != LPFC_SLI_REV4) ||
+ (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev) == 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0376 READ_REV Error. SLI Level %d "
+ "FCoE enabled %d\n",
+ bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev),
+ bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev));
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+ /* Single threaded at this point, no need for lock */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= HBA_FCOE_SUPPORT;
+ spin_unlock_irq(&phba->hbalock);
+ /*
+ * Evaluate the read rev and vpd data. Populate the driver
+ * state with the results. If this routine fails, the failure
+ * is not fatal as the driver will use generic values.
+ */
+ rc = lpfc_parse_vpd(phba, vpd, vpd_size);
+ if (unlikely(!rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0377 Error %d parsing vpd. "
+ "Using defaults.\n", rc);
+ rc = 0;
+ }
+
+ /* By now, we should determine the SLI revision, hard code for now */
+ phba->sli_rev = LPFC_SLI_REV4;
+
+ /*
+ * Discover the port's supported feature set and match it against the
+ * hosts requests.
+ */
+ lpfc_request_features(phba, mboxq);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (unlikely(rc)) {
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+
+ /*
+ * The port must support FCP initiator mode as this is the
+ * only mode running in the host.
+ */
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_fcpi, &mqe->un.req_ftrs))) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0378 No support for fcpi mode.\n");
+ ftr_rsp++;
+ }
+
+ /*
+ * If the port cannot support the host's requested features
+ * then turn off the global config parameters to disable the
+ * feature in the driver. This is not a fatal error.
+ */
+ if ((phba->cfg_enable_bg) &&
+ !(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+ ftr_rsp++;
+
+ if (phba->max_vpi && phba->cfg_enable_npiv &&
+ !(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+ ftr_rsp++;
+
+ if (ftr_rsp) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0379 Feature Mismatch Data: x%08x %08x "
+ "x%x x%x x%x\n", mqe->un.req_ftrs.word2,
+ mqe->un.req_ftrs.word3, phba->cfg_enable_bg,
+ phba->cfg_enable_npiv, phba->max_vpi);
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_dif, &mqe->un.req_ftrs)))
+ phba->cfg_enable_bg = 0;
+ if (!(bf_get(lpfc_mbx_rq_ftr_rsp_npiv, &mqe->un.req_ftrs)))
+ phba->cfg_enable_npiv = 0;
+ }
+
+ /* These SLI3 features are assumed in SLI4 */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Read the port's service parameters. */
+ lpfc_read_sparam(phba, mboxq, vport->vpi);
+ mboxq->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ mp = (struct lpfc_dmabuf *) mboxq->context1;
+ if (rc == MBX_SUCCESS) {
+ memcpy(&vport->fc_sparam, mp->virt, sizeof(struct serv_parm));
+ rc = 0;
+ }
+
+ /*
+ * This memory was allocated by the lpfc_read_sparam routine. Release
+ * it to the mbuf pool.
+ */
+ lpfc_mbuf_free(phba, mp->virt, mp->phys);
+ kfree(mp);
+ mboxq->context1 = NULL;
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0382 READ_SPARAM command failed "
+ "status %d, mbxStatus x%x\n",
+ rc, bf_get(lpfc_mqe_status, mqe));
+ phba->link_state = LPFC_HBA_ERROR;
+ rc = -EIO;
+ goto out_free_vpd;
+ }
+
+ if (phba->cfg_soft_wwnn)
+ u64_to_wwn(phba->cfg_soft_wwnn,
+ vport->fc_sparam.nodeName.u.wwn);
+ if (phba->cfg_soft_wwpn)
+ u64_to_wwn(phba->cfg_soft_wwpn,
+ vport->fc_sparam.portName.u.wwn);
+ memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
+ sizeof(struct lpfc_name));
+ memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
+ sizeof(struct lpfc_name));
+
+ /* Update the fc_host data structures with new wwn. */
+ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+ fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
+ /* Register SGL pool to the device using non-embedded mailbox command */
+ rc = lpfc_sli4_post_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0582 Error %d during sgl post operation", rc);
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+
+ /* Register SCSI SGL pool to the device */
+ rc = lpfc_sli4_repost_scsi_sgl_list(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
+ "0383 Error %d during scsi sgl post opeation",
+ rc);
+ /* Some Scsi buffers were moved to the abort scsi list */
+ /* A pci function reset will repost them */
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+
+ /* Post the rpi header region to the device. */
+ rc = lpfc_sli4_post_all_rpi_hdrs(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0393 Error %d during rpi post operation\n",
+ rc);
+ rc = -ENODEV;
+ goto out_free_vpd;
+ }
+ /* Temporary initialization of lpfc_fip_flag to non-fip */
+ bf_set(lpfc_fip_flag, &phba->sli4_hba.sli4_flags, 0);
+
+ /* Set up all the queues to the device */
+ rc = lpfc_sli4_queue_setup(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0381 Error %d during queue setup.\n ", rc);
+ goto out_stop_timers;
+ }
+
+ /* Arm the CQs and then EQs on device */
+ lpfc_sli4_arm_cqeq_intr(phba);
+
+ /* Indicate device interrupt mode */
+ phba->sli4_hba.intr_enable = 1;
+
+ /* Allow asynchronous mailbox command to go through */
+ spin_lock_irq(&phba->hbalock);
+ phba->sli.sli_flag &= ~LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Post receive buffers to the device */
+ lpfc_sli4_rb_setup(phba);
+
+ /* Start the ELS watchdog timer */
+ /*
+ * The driver for SLI4 is not yet ready to process timeouts
+ * or interrupts. Once it is, the comment bars can be removed.
+ */
+ /* mod_timer(&vport->els_tmofunc,
+ * jiffies + HZ * (phba->fc_ratov*2)); */
+
+ /* Start heart beat timer */
+ mod_timer(&phba->hb_tmofunc,
+ jiffies + HZ * LPFC_HB_MBOX_INTERVAL);
+ phba->hb_outstanding = 0;
+ phba->last_completion_time = jiffies;
+
+ /* Start error attention (ERATT) polling timer */
+ mod_timer(&phba->eratt_poll, jiffies + HZ * LPFC_ERATT_POLL_INTERVAL);
+
+ /*
+ * The port is ready, set the host's link state to LINK_DOWN
+ * in preparation for link interrupts.
+ */
+ lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
+ mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ lpfc_set_loopback_flag(phba);
+ /* Change driver state to LPFC_LINK_DOWN right before init link */
+ spin_lock_irq(&phba->hbalock);
+ phba->link_state = LPFC_LINK_DOWN;
+ spin_unlock_irq(&phba->hbalock);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (unlikely(rc != MBX_NOT_FINISHED)) {
+ kfree(vpd);
+ return 0;
+ } else
+ rc = -EIO;
+
+ /* Unset all the queues set up in this routine when error out */
+ if (rc)
+ lpfc_sli4_queue_unset(phba);
+
+out_stop_timers:
+ if (rc)
+ lpfc_stop_hba_timers(phba);
+out_free_vpd:
+ kfree(vpd);
+out_free_mbox:
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return rc;
+}
/**
* lpfc_mbox_timeout - Timeout call back function for mbox timer
@@ -3244,7 +4608,7 @@
lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *pmbox = phba->sli.mbox_active;
- MAILBOX_t *mb = &pmbox->mb;
+ MAILBOX_t *mb = &pmbox->u.mb;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
@@ -3281,7 +4645,7 @@
spin_unlock_irq(&phba->pport->work_port_lock);
spin_lock_irq(&phba->hbalock);
phba->link_state = LPFC_LINK_UNKNOWN;
- psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ psli->sli_flag &= ~LPFC_SLI_ACTIVE;
spin_unlock_irq(&phba->hbalock);
pring = &psli->ring[psli->fcp_ring];
@@ -3289,32 +4653,20 @@
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0345 Resetting board due to mailbox timeout\n");
- /*
- * lpfc_offline calls lpfc_sli_hba_down which will clean up
- * on oustanding mailbox commands.
- */
- /* If resets are disabled then set error state and return. */
- if (!phba->cfg_enable_hba_reset) {
- phba->link_state = LPFC_HBA_ERROR;
- return;
- }
- lpfc_offline_prep(phba);
- lpfc_offline(phba);
- lpfc_sli_brdrestart(phba);
- lpfc_online(phba);
- lpfc_unblock_mgmt_io(phba);
- return;
+
+ /* Reset the HBA device */
+ lpfc_reset_hba(phba);
}
/**
- * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
+ * lpfc_sli_issue_mbox_s3 - Issue an SLI3 mailbox command to firmware
* @phba: Pointer to HBA context object.
* @pmbox: Pointer to mailbox object.
* @flag: Flag indicating how the mailbox need to be processed.
*
* This function is called by discovery code and HBA management code
- * to submit a mailbox command to firmware. This function gets the
- * hbalock to protect the data structures.
+ * to submit a mailbox command to firmware with SLI-3 interface spec. This
+ * function gets the hbalock to protect the data structures.
* The mailbox command can be submitted in polling mode, in which case
* this function will wait in a polling loop for the completion of the
* mailbox.
@@ -3332,8 +4684,9 @@
* return codes the caller owns the mailbox command after the return of
* the function.
**/
-int
-lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+static int
+lpfc_sli_issue_mbox_s3(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox,
+ uint32_t flag)
{
MAILBOX_t *mb;
struct lpfc_sli *psli = &phba->sli;
@@ -3349,6 +4702,10 @@
spin_lock_irqsave(&phba->hbalock, drvr_flag);
if (!pmbox) {
/* processing mbox queue from intr_handler */
+ if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+ spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ return MBX_SUCCESS;
+ }
processing_queue = 1;
phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
pmbox = lpfc_mbox_get(phba);
@@ -3365,7 +4722,7 @@
lpfc_printf_log(phba, KERN_ERR,
LOG_MBOX | LOG_VPORT,
"1806 Mbox x%x failed. No vport\n",
- pmbox->mb.mbxCommand);
+ pmbox->u.mb.mbxCommand);
dump_stack();
goto out_not_finished;
}
@@ -3385,21 +4742,29 @@
psli = &phba->sli;
- mb = &pmbox->mb;
+ mb = &pmbox->u.mb;
status = MBX_SUCCESS;
if (phba->link_state == LPFC_HBA_ERROR) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):0311 Mailbox command x%x cannot "
+ "issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
goto out_not_finished;
}
if (mb->mbxCommand != MBX_KILL_BOARD && flag & MBX_NOWAIT &&
!(readl(phba->HCregaddr) & HC_MBINT_ENA)) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2528 Mailbox command x%x cannot "
+ "issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand, psli->sli_flag, flag);
goto out_not_finished;
}
@@ -3413,14 +4778,24 @@
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2529 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
- if (!(psli->sli_flag & LPFC_SLI2_ACTIVE)) {
+ if (!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2530 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
@@ -3462,12 +4837,17 @@
/* If we are not polling, we MUST be in SLI2 mode */
if (flag != MBX_POLL) {
- if (!(psli->sli_flag & LPFC_SLI2_ACTIVE) &&
+ if (!(psli->sli_flag & LPFC_SLI_ACTIVE) &&
(mb->mbxCommand != MBX_KILL_BOARD)) {
psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
/* Mbox command <mbxCommand> cannot issue */
- LOG_MBOX_CANNOT_ISSUE_DATA(phba, pmbox, psli, flag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2531 Mailbox command x%x "
+ "cannot issue Data: x%x x%x\n",
+ pmbox->vport ? pmbox->vport->vpi : 0,
+ pmbox->u.mb.mbxCommand,
+ psli->sli_flag, flag);
goto out_not_finished;
}
/* timeout active mbox command */
@@ -3506,7 +4886,7 @@
/* next set own bit for the adapter and copy over command word */
mb->mbxOwner = OWN_CHIP;
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First copy command data to host SLIM area */
lpfc_sli_pcimem_bcopy(mb, phba->mbox, MAILBOX_CMD_SIZE);
} else {
@@ -3529,7 +4909,7 @@
if (mb->mbxCommand == MBX_CONFIG_PORT) {
/* switch over to host mailbox */
- psli->sli_flag |= LPFC_SLI2_ACTIVE;
+ psli->sli_flag |= LPFC_SLI_ACTIVE;
}
}
@@ -3552,7 +4932,7 @@
writel(CA_MBATT, phba->CAregaddr);
readl(phba->CAregaddr); /* flush */
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First read mbox status word */
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
@@ -3591,7 +4971,7 @@
spin_lock_irqsave(&phba->hbalock, drvr_flag);
}
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* First copy command data */
word0 = *((uint32_t *)phba->mbox);
word0 = le32_to_cpu(word0);
@@ -3604,7 +4984,7 @@
if (((slimword0 & OWN_CHIP) != OWN_CHIP)
&& slimmb->mbxStatus) {
psli->sli_flag &=
- ~LPFC_SLI2_ACTIVE;
+ ~LPFC_SLI_ACTIVE;
word0 = slimword0;
}
}
@@ -3616,7 +4996,7 @@
ha_copy = readl(phba->HAregaddr);
}
- if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
/* copy results back to user */
lpfc_sli_pcimem_bcopy(phba->mbox, mb, MAILBOX_CMD_SIZE);
} else {
@@ -3643,13 +5023,420 @@
out_not_finished:
if (processing_queue) {
- pmbox->mb.mbxStatus = MBX_NOT_FINISHED;
+ pmbox->u.mb.mbxStatus = MBX_NOT_FINISHED;
lpfc_mbox_cmpl_put(phba, pmbox);
}
return MBX_NOT_FINISHED;
}
/**
+ * lpfc_sli4_post_sync_mbox - Post an SLI4 mailbox to the bootstrap mailbox
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * The function posts a mailbox to the port. The mailbox is expected
+ * to be comletely filled in and ready for the port to operate on it.
+ * This routine executes a synchronous completion operation on the
+ * mailbox by polling for its completion.
+ *
+ * The caller must not be holding any locks when calling this routine.
+ *
+ * Returns:
+ * MBX_SUCCESS - mailbox posted successfully
+ * Any of the MBX error values.
+ **/
+static int
+lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ int rc = MBX_SUCCESS;
+ unsigned long iflag;
+ uint32_t db_ready;
+ uint32_t mcqe_status;
+ uint32_t mbx_cmnd;
+ unsigned long timeout;
+ struct lpfc_sli *psli = &phba->sli;
+ struct lpfc_mqe *mb = &mboxq->u.mqe;
+ struct lpfc_bmbx_create *mbox_rgn;
+ struct dma_address *dma_address;
+ struct lpfc_register bmbx_reg;
+
+ /*
+ * Only one mailbox can be active to the bootstrap mailbox region
+ * at a time and there is no queueing provided.
+ */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2532 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, MBX_POLL);
+ return MBXERR_ERROR;
+ }
+ /* The server grabs the token and owns it until release */
+ psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = mboxq;
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+ /*
+ * Initialize the bootstrap memory region to avoid stale data areas
+ * in the mailbox post. Then copy the caller's mailbox contents to
+ * the bmbx mailbox region.
+ */
+ mbx_cmnd = bf_get(lpfc_mqe_command, mb);
+ memset(phba->sli4_hba.bmbx.avirt, 0, sizeof(struct lpfc_bmbx_create));
+ lpfc_sli_pcimem_bcopy(mb, phba->sli4_hba.bmbx.avirt,
+ sizeof(struct lpfc_mqe));
+
+ /* Post the high mailbox dma address to the port and wait for ready. */
+ dma_address = &phba->sli4_hba.bmbx.dma_address;
+ writel(dma_address->addr_hi, phba->sli4_hba.BMBXregaddr);
+
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ * 1000) + jiffies;
+ do {
+ bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+ db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+ if (!db_ready)
+ msleep(2);
+
+ if (time_after(jiffies, timeout)) {
+ rc = MBXERR_ERROR;
+ goto exit;
+ }
+ } while (!db_ready);
+
+ /* Post the low mailbox dma address to the port. */
+ writel(dma_address->addr_lo, phba->sli4_hba.BMBXregaddr);
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, mbx_cmnd)
+ * 1000) + jiffies;
+ do {
+ bmbx_reg.word0 = readl(phba->sli4_hba.BMBXregaddr);
+ db_ready = bf_get(lpfc_bmbx_rdy, &bmbx_reg);
+ if (!db_ready)
+ msleep(2);
+
+ if (time_after(jiffies, timeout)) {
+ rc = MBXERR_ERROR;
+ goto exit;
+ }
+ } while (!db_ready);
+
+ /*
+ * Read the CQ to ensure the mailbox has completed.
+ * If so, update the mailbox status so that the upper layers
+ * can complete the request normally.
+ */
+ lpfc_sli_pcimem_bcopy(phba->sli4_hba.bmbx.avirt, mb,
+ sizeof(struct lpfc_mqe));
+ mbox_rgn = (struct lpfc_bmbx_create *) phba->sli4_hba.bmbx.avirt;
+ lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe,
+ sizeof(struct lpfc_mcqe));
+ mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe);
+
+ /* Prefix the mailbox status with range x4000 to note SLI4 status. */
+ if (mcqe_status != MB_CQE_STATUS_SUCCESS) {
+ bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status);
+ rc = MBXERR_ERROR;
+ }
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0356 Mailbox cmd x%x (x%x) Status x%x "
+ "Data: x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x x%x"
+ " x%x x%x CQ: x%x x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mbx_cmnd, lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ bf_get(lpfc_mqe_status, mb),
+ mb->un.mb_words[0], mb->un.mb_words[1],
+ mb->un.mb_words[2], mb->un.mb_words[3],
+ mb->un.mb_words[4], mb->un.mb_words[5],
+ mb->un.mb_words[6], mb->un.mb_words[7],
+ mb->un.mb_words[8], mb->un.mb_words[9],
+ mb->un.mb_words[10], mb->un.mb_words[11],
+ mb->un.mb_words[12], mboxq->mcqe.word0,
+ mboxq->mcqe.mcqe_tag0, mboxq->mcqe.mcqe_tag1,
+ mboxq->mcqe.trailer);
+exit:
+ /* We are holding the token, no needed for lock when release */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return rc;
+}
+
+/**
+ * lpfc_sli_issue_mbox_s4 - Issue an SLI4 mailbox command to firmware
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This function is called by discovery code and HBA management code to submit
+ * a mailbox command to firmware with SLI-4 interface spec.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+static int
+lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
+ uint32_t flag)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ unsigned long iflags;
+ int rc;
+
+ /* Detect polling mode and jump to a handler */
+ if (!phba->sli4_hba.intr_enable) {
+ if (flag == MBX_POLL)
+ rc = lpfc_sli4_post_sync_mbox(phba, mboxq);
+ else
+ rc = -EIO;
+ if (rc != MBX_SUCCESS)
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2541 Mailbox command x%x "
+ "(x%x) cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ return rc;
+ } else if (flag == MBX_POLL) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2542 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ return -EIO;
+ }
+
+ /* Now, interrupt mode asynchrous mailbox command */
+ rc = lpfc_mbox_cmd_check(phba, mboxq);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2543 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ goto out_not_finished;
+ }
+ rc = lpfc_mbox_dev_check(phba);
+ if (unlikely(rc)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2544 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, flag);
+ goto out_not_finished;
+ }
+
+ /* Put the mailbox command to the driver internal FIFO */
+ psli->slistat.mbox_busy++;
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ lpfc_mbox_put(phba, mboxq);
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0354 Mbox cmd issue - Enqueue Data: "
+ "x%x (x%x) x%x x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0xffffff,
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ phba->pport->port_state,
+ psli->sli_flag, MBX_NOWAIT);
+ /* Wake up worker thread to transport mailbox command from head */
+ lpfc_worker_wake_up(phba);
+
+ return MBX_BUSY;
+
+out_not_finished:
+ return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli4_post_async_mbox - Post an SLI4 mailbox command to device
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called by worker thread to send a mailbox command to
+ * SLI4 HBA firmware.
+ *
+ **/
+int
+lpfc_sli4_post_async_mbox(struct lpfc_hba *phba)
+{
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *mboxq;
+ int rc = MBX_SUCCESS;
+ unsigned long iflags;
+ struct lpfc_mqe *mqe;
+ uint32_t mbx_cmnd;
+
+ /* Check interrupt mode before post async mailbox command */
+ if (unlikely(!phba->sli4_hba.intr_enable))
+ return MBX_NOT_FINISHED;
+
+ /* Check for mailbox command service token */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ if (unlikely(psli->sli_flag & LPFC_SLI_ASYNC_MBX_BLK)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_NOT_FINISHED;
+ }
+ if (psli->sli_flag & LPFC_SLI_MBOX_ACTIVE) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_NOT_FINISHED;
+ }
+ if (unlikely(phba->sli.mbox_active)) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "0384 There is pending active mailbox cmd\n");
+ return MBX_NOT_FINISHED;
+ }
+ /* Take the mailbox command service token */
+ psli->sli_flag |= LPFC_SLI_MBOX_ACTIVE;
+
+ /* Get the next mailbox command from head of queue */
+ mboxq = lpfc_mbox_get(phba);
+
+ /* If no more mailbox command waiting for post, we're done */
+ if (!mboxq) {
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ return MBX_SUCCESS;
+ }
+ phba->sli.mbox_active = mboxq;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ /* Check device readiness for posting mailbox command */
+ rc = lpfc_mbox_dev_check(phba);
+ if (unlikely(rc))
+ /* Driver clean routine will clean up pending mailbox */
+ goto out_not_finished;
+
+ /* Prepare the mbox command to be posted */
+ mqe = &mboxq->u.mqe;
+ mbx_cmnd = bf_get(lpfc_mqe_command, mqe);
+
+ /* Start timer for the mbox_tmo and log some mailbox post messages */
+ mod_timer(&psli->mbox_tmo, (jiffies +
+ (HZ * lpfc_mbox_tmo_val(phba, mbx_cmnd))));
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "(%d):0355 Mailbox cmd x%x (x%x) issue Data: "
+ "x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0, mbx_cmnd,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ phba->pport->port_state, psli->sli_flag);
+
+ if (mbx_cmnd != MBX_HEARTBEAT) {
+ if (mboxq->vport) {
+ lpfc_debugfs_disc_trc(mboxq->vport,
+ LPFC_DISC_TRC_MBOX_VPORT,
+ "MBOX Send vport: cmd:x%x mb:x%x x%x",
+ mbx_cmnd, mqe->un.mb_words[0],
+ mqe->un.mb_words[1]);
+ } else {
+ lpfc_debugfs_disc_trc(phba->pport,
+ LPFC_DISC_TRC_MBOX,
+ "MBOX Send: cmd:x%x mb:x%x x%x",
+ mbx_cmnd, mqe->un.mb_words[0],
+ mqe->un.mb_words[1]);
+ }
+ }
+ psli->slistat.mbox_cmd++;
+
+ /* Post the mailbox command to the port */
+ rc = lpfc_sli4_mq_put(phba->sli4_hba.mbx_wq, mqe);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
+ "(%d):2533 Mailbox command x%x (x%x) "
+ "cannot issue Data: x%x x%x\n",
+ mboxq->vport ? mboxq->vport->vpi : 0,
+ mboxq->u.mb.mbxCommand,
+ lpfc_sli4_mbox_opcode_get(phba, mboxq),
+ psli->sli_flag, MBX_NOWAIT);
+ goto out_not_finished;
+ }
+
+ return rc;
+
+out_not_finished:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ mboxq->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ __lpfc_mbox_cmpl_put(phba, mboxq);
+ /* Release the token */
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return MBX_NOT_FINISHED;
+}
+
+/**
+ * lpfc_sli_issue_mbox - Wrapper func for issuing mailbox command
+ * @phba: Pointer to HBA context object.
+ * @pmbox: Pointer to mailbox object.
+ * @flag: Flag indicating how the mailbox need to be processed.
+ *
+ * This routine wraps the actual SLI3 or SLI4 mailbox issuing routine from
+ * the API jump table function pointer from the lpfc_hba struct.
+ *
+ * Return codes the caller owns the mailbox command after the return of the
+ * function.
+ **/
+int
+lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
+{
+ return phba->lpfc_sli_issue_mbox(phba, pmbox, flag);
+}
+
+/**
+ * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the mbox interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_mbox_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s3;
+ phba->lpfc_sli_handle_slow_ring_event =
+ lpfc_sli_handle_slow_ring_event_s3;
+ phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s3;
+ phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s3;
+ phba->lpfc_sli_brdready = lpfc_sli_brdready_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->lpfc_sli_issue_mbox = lpfc_sli_issue_mbox_s4;
+ phba->lpfc_sli_handle_slow_ring_event =
+ lpfc_sli_handle_slow_ring_event_s4;
+ phba->lpfc_sli_hbq_to_firmware = lpfc_sli_hbq_to_firmware_s4;
+ phba->lpfc_sli_brdrestart = lpfc_sli_brdrestart_s4;
+ phba->lpfc_sli_brdready = lpfc_sli_brdready_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1420 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ return 0;
+}
+
+/**
* __lpfc_sli_ringtx_put - Add an iocb to the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
@@ -3701,35 +5488,34 @@
}
/**
- * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
+ * __lpfc_sli_issue_iocb_s3 - SLI3 device lockless ver of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
- * @pring: Pointer to driver SLI ring object.
+ * @ring_number: SLI ring number to issue iocb on.
* @piocb: Pointer to command iocb.
* @flag: Flag indicating if this command can be put into txq.
*
- * __lpfc_sli_issue_iocb is used by other functions in the driver
- * to issue an iocb command to the HBA. If the PCI slot is recovering
- * from error state or if HBA is resetting or if LPFC_STOP_IOCB_EVENT
- * flag is turned on, the function returns IOCB_ERROR.
- * When the link is down, this function allows only iocbs for
- * posting buffers.
- * This function finds next available slot in the command ring and
- * posts the command to the available slot and writes the port
- * attention register to request HBA start processing new iocb.
- * If there is no slot available in the ring and
- * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the
- * txq, otherwise the function returns IOCB_BUSY.
+ * __lpfc_sli_issue_iocb_s3 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-3 interface spec. If the PCI slot is
+ * recovering from error state, if HBA is resetting or if LPFC_STOP_IOCB_EVENT
+ * flag is turned on, the function returns IOCB_ERROR. When the link is down,
+ * this function allows only iocbs for posting buffers. This function finds
+ * next available slot in the command ring and posts the command to the
+ * available slot and writes the port attention register to request HBA start
+ * processing new iocb. If there is no slot available in the ring and
+ * flag & SLI_IOCB_RET_IOCB is set, the new iocb is added to the txq, otherwise
+ * the function returns IOCB_BUSY.
*
- * This function is called with hbalock held.
- * The function will return success after it successfully submit the
- * iocb to firmware or after adding to the txq.
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
**/
static int
-__lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+__lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *piocb, uint32_t flag)
{
struct lpfc_iocbq *nextiocb;
IOCB_t *iocb;
+ struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
if (piocb->iocb_cmpl && (!piocb->vport) &&
(piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) &&
@@ -3833,6 +5619,498 @@
return IOCB_BUSY;
}
+/**
+ * lpfc_sli4_bpl2sgl - Convert the bpl/bde to a sgl.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @sglq: Pointer to the scatter gather queue object.
+ *
+ * This routine converts the bpl or bde that is in the IOCB
+ * to a sgl list for the sli4 hardware. The physical address
+ * of the bpl/bde is converted back to a virtual address.
+ * If the IOCB contains a BPL then the list of BDE's is
+ * converted to sli4_sge's. If the IOCB contains a single
+ * BDE then it is converted to a single sli_sge.
+ * The IOCB is still in cpu endianess so the contents of
+ * the bpl can be used without byte swapping.
+ *
+ * Returns valid XRI = Success, NO_XRI = Failure.
+**/
+static uint16_t
+lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
+ struct lpfc_sglq *sglq)
+{
+ uint16_t xritag = NO_XRI;
+ struct ulp_bde64 *bpl = NULL;
+ struct ulp_bde64 bde;
+ struct sli4_sge *sgl = NULL;
+ IOCB_t *icmd;
+ int numBdes = 0;
+ int i = 0;
+
+ if (!piocbq || !sglq)
+ return xritag;
+
+ sgl = (struct sli4_sge *)sglq->sgl;
+ icmd = &piocbq->iocb;
+ if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+ numBdes = icmd->un.genreq64.bdl.bdeSize /
+ sizeof(struct ulp_bde64);
+ /* The addrHigh and addrLow fields within the IOCB
+ * have not been byteswapped yet so there is no
+ * need to swap them back.
+ */
+ bpl = (struct ulp_bde64 *)
+ ((struct lpfc_dmabuf *)piocbq->context3)->virt;
+
+ if (!bpl)
+ return xritag;
+
+ for (i = 0; i < numBdes; i++) {
+ /* Should already be byte swapped. */
+ sgl->addr_hi = bpl->addrHigh;
+ sgl->addr_lo = bpl->addrLow;
+ /* swap the size field back to the cpu so we
+ * can assign it to the sgl.
+ */
+ bde.tus.w = le32_to_cpu(bpl->tus.w);
+ bf_set(lpfc_sli4_sge_len, sgl, bde.tus.f.bdeSize);
+ if ((i+1) == numBdes)
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ else
+ bf_set(lpfc_sli4_sge_last, sgl, 0);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ bpl++;
+ sgl++;
+ }
+ } else if (icmd->un.genreq64.bdl.bdeFlags == BUFF_TYPE_BDE_64) {
+ /* The addrHigh and addrLow fields of the BDE have not
+ * been byteswapped yet so they need to be swapped
+ * before putting them in the sgl.
+ */
+ sgl->addr_hi =
+ cpu_to_le32(icmd->un.genreq64.bdl.addrHigh);
+ sgl->addr_lo =
+ cpu_to_le32(icmd->un.genreq64.bdl.addrLow);
+ bf_set(lpfc_sli4_sge_len, sgl,
+ icmd->un.genreq64.bdl.bdeSize);
+ bf_set(lpfc_sli4_sge_last, sgl, 1);
+ sgl->word2 = cpu_to_le32(sgl->word2);
+ sgl->word3 = cpu_to_le32(sgl->word3);
+ }
+ return sglq->sli4_xritag;
+}
+
+/**
+ * lpfc_sli4_scmd_to_wqidx_distr - scsi command to SLI4 WQ index distribution
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ *
+ * This routine performs a round robin SCSI command to SLI4 FCP WQ index
+ * distribution.
+ *
+ * Return: index into SLI4 fast-path FCP queue index.
+ **/
+static uint32_t
+lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba, struct lpfc_iocbq *piocb)
+{
+ static uint32_t fcp_qidx;
+
+ return fcp_qidx++ % phba->cfg_fcp_wq_count;
+}
+
+/**
+ * lpfc_sli_iocb2wqe - Convert the IOCB to a work queue entry.
+ * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to command iocb.
+ * @wqe: Pointer to the work queue entry.
+ *
+ * This routine converts the iocb command to its Work Queue Entry
+ * equivalent. The wqe pointer should not have any fields set when
+ * this routine is called because it will memcpy over them.
+ * This routine does not set the CQ_ID or the WQEC bits in the
+ * wqe.
+ *
+ * Returns: 0 = Success, IOCB_ERROR = Failure.
+ **/
+static int
+lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
+ union lpfc_wqe *wqe)
+{
+ uint32_t payload_len = 0;
+ uint8_t ct = 0;
+ uint32_t fip;
+ uint32_t abort_tag;
+ uint8_t command_type = ELS_COMMAND_NON_FIP;
+ uint8_t cmnd;
+ uint16_t xritag;
+ struct ulp_bde64 *bpl = NULL;
+
+ fip = bf_get(lpfc_fip_flag, &phba->sli4_hba.sli4_flags);
+ /* The fcp commands will set command type */
+ if ((!(iocbq->iocb_flag & LPFC_IO_FCP)) && (!fip))
+ command_type = ELS_COMMAND_NON_FIP;
+ else if (!(iocbq->iocb_flag & LPFC_IO_FCP))
+ command_type = ELS_COMMAND_FIP;
+ else if (iocbq->iocb_flag & LPFC_IO_FCP)
+ command_type = FCP_COMMAND;
+ else {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2019 Invalid cmd 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ /* Some of the fields are in the right position already */
+ memcpy(wqe, &iocbq->iocb, sizeof(union lpfc_wqe));
+ abort_tag = (uint32_t) iocbq->iotag;
+ xritag = iocbq->sli4_xritag;
+ wqe->words[7] = 0; /* The ct field has moved so reset */
+ /* words0-2 bpl convert bde */
+ if (iocbq->iocb.un.genreq64.bdl.bdeFlags == BUFF_TYPE_BLP_64) {
+ bpl = (struct ulp_bde64 *)
+ ((struct lpfc_dmabuf *)iocbq->context3)->virt;
+ if (!bpl)
+ return IOCB_ERROR;
+
+ /* Should already be byte swapped. */
+ wqe->generic.bde.addrHigh = le32_to_cpu(bpl->addrHigh);
+ wqe->generic.bde.addrLow = le32_to_cpu(bpl->addrLow);
+ /* swap the size field back to the cpu so we
+ * can assign it to the sgl.
+ */
+ wqe->generic.bde.tus.w = le32_to_cpu(bpl->tus.w);
+ payload_len = wqe->generic.bde.tus.f.bdeSize;
+ } else
+ payload_len = iocbq->iocb.un.fcpi64.bdl.bdeSize;
+
+ iocbq->iocb.ulpIoTag = iocbq->iotag;
+ cmnd = iocbq->iocb.ulpCommand;
+
+ switch (iocbq->iocb.ulpCommand) {
+ case CMD_ELS_REQUEST64_CR:
+ if (!iocbq->iocb.ulpLe) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2007 Only Limited Edition cmd Format"
+ " supported 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ wqe->els_req.payload_len = payload_len;
+ /* Els_reguest64 has a TMO */
+ bf_set(wqe_tmo, &wqe->els_req.wqe_com,
+ iocbq->iocb.ulpTimeout);
+ /* Need a VF for word 4 set the vf bit*/
+ bf_set(els_req64_vf, &wqe->els_req, 0);
+ /* And a VFID for word 12 */
+ bf_set(els_req64_vfid, &wqe->els_req, 0);
+ /*
+ * Set ct field to 3, indicates that the context_tag field
+ * contains the FCFI and remote N_Port_ID is
+ * in word 5.
+ */
+
+ ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+ bf_set(lpfc_wqe_gen_context, &wqe->generic,
+ iocbq->iocb.ulpContext);
+
+ if (iocbq->vport->fc_myDID != 0) {
+ bf_set(els_req64_sid, &wqe->els_req,
+ iocbq->vport->fc_myDID);
+ bf_set(els_req64_sp, &wqe->els_req, 1);
+ }
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic, ct);
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+ /* CCP CCPE PV PRI in word10 were set in the memcpy */
+ break;
+ case CMD_XMIT_SEQUENCE64_CR:
+ /* word3 iocb=io_tag32 wqe=payload_offset */
+ /* payload offset used for multilpe outstanding
+ * sequences on the same exchange
+ */
+ wqe->words[3] = 0;
+ /* word4 relative_offset memcpy */
+ /* word5 r_ctl/df_ctl memcpy */
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, 0);
+ wqe->xmit_sequence.xmit_len = payload_len;
+ break;
+ case CMD_XMIT_BCAST64_CN:
+ /* word3 iocb=iotag32 wqe=payload_len */
+ wqe->words[3] = 0; /* no definition for this in wqe */
+ /* word4 iocb=rsvd wqe=rsvd */
+ /* word5 iocb=rctl/type/df_ctl wqe=rctl/type/df_ctl memcpy */
+ /* word6 iocb=ctxt_tag/io_tag wqe=ctxt_tag/xri */
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+ break;
+ case CMD_FCP_IWRITE64_CR:
+ command_type = FCP_COMMAND_DATA_OUT;
+ /* The struct for wqe fcp_iwrite has 3 fields that are somewhat
+ * confusing.
+ * word3 is payload_len: byte offset to the sgl entry for the
+ * fcp_command.
+ * word4 is total xfer len, same as the IOCB->ulpParameter.
+ * word5 is initial xfer len 0 = wait for xfer-ready
+ */
+
+ /* Always wait for xfer-ready before sending data */
+ wqe->fcp_iwrite.initial_xfer_len = 0;
+ /* word 4 (xfer length) should have been set on the memcpy */
+
+ /* allow write to fall through to read */
+ case CMD_FCP_IREAD64_CR:
+ /* FCP_CMD is always the 1st sgl entry */
+ wqe->fcp_iread.payload_len =
+ payload_len + sizeof(struct fcp_rsp);
+
+ /* word 4 (xfer length) should have been set on the memcpy */
+
+ bf_set(lpfc_wqe_gen_erp, &wqe->generic,
+ iocbq->iocb.ulpFCP2Rcvy);
+ bf_set(lpfc_wqe_gen_lnk, &wqe->generic, iocbq->iocb.ulpXS);
+ /* The XC bit and the XS bit are similar. The driver never
+ * tracked whether or not the exchange was previouslly open.
+ * XC = Exchange create, 0 is create. 1 is already open.
+ * XS = link cmd: 1 do not close the exchange after command.
+ * XS = 0 close exchange when command completes.
+ * The only time we would not set the XC bit is when the XS bit
+ * is set and we are sending our 2nd or greater command on
+ * this exchange.
+ */
+
+ /* ALLOW read & write to fall through to ICMD64 */
+ case CMD_FCP_ICMND64_CR:
+ /* Always open the exchange */
+ bf_set(wqe_xc, &wqe->fcp_iread.wqe_com, 0);
+
+ wqe->words[10] &= 0xffff0000; /* zero out ebde count */
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ break;
+ case CMD_GEN_REQUEST64_CR:
+ /* word3 command length is described as byte offset to the
+ * rsp_data. Would always be 16, sizeof(struct sli4_sge)
+ * sgl[0] = cmnd
+ * sgl[1] = rsp.
+ *
+ */
+ wqe->gen_req.command_len = payload_len;
+ /* Word4 parameter copied in the memcpy */
+ /* Word5 [rctl, type, df_ctl, la] copied in memcpy */
+ /* word6 context tag copied in memcpy */
+ if (iocbq->iocb.ulpCt_h || iocbq->iocb.ulpCt_l) {
+ ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2015 Invalid CT %x command 0x%x\n",
+ ct, iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ }
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic, 0);
+ bf_set(wqe_tmo, &wqe->gen_req.wqe_com,
+ iocbq->iocb.ulpTimeout);
+
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ command_type = OTHER_COMMAND;
+ break;
+ case CMD_XMIT_ELS_RSP64_CX:
+ /* words0-2 BDE memcpy */
+ /* word3 iocb=iotag32 wqe=rsvd */
+ wqe->words[3] = 0;
+ /* word4 iocb=did wge=rsvd. */
+ wqe->words[4] = 0;
+ /* word5 iocb=rsvd wge=did */
+ bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
+ iocbq->iocb.un.elsreq64.remoteID);
+
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+
+ bf_set(lpfc_wqe_gen_pu, &wqe->generic, iocbq->iocb.ulpPU);
+ bf_set(wqe_rcvoxid, &wqe->generic, iocbq->iocb.ulpContext);
+ if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l)
+ bf_set(lpfc_wqe_gen_context, &wqe->generic,
+ iocbq->vport->vpi + phba->vpi_base);
+ command_type = OTHER_COMMAND;
+ break;
+ case CMD_CLOSE_XRI_CN:
+ case CMD_ABORT_XRI_CN:
+ case CMD_ABORT_XRI_CX:
+ /* words 0-2 memcpy should be 0 rserved */
+ /* port will send abts */
+ if (iocbq->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ /*
+ * The link is down so the fw does not need to send abts
+ * on the wire.
+ */
+ bf_set(abort_cmd_ia, &wqe->abort_cmd, 1);
+ else
+ bf_set(abort_cmd_ia, &wqe->abort_cmd, 0);
+ bf_set(abort_cmd_criteria, &wqe->abort_cmd, T_XRI_TAG);
+ abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+ wqe->words[5] = 0;
+ bf_set(lpfc_wqe_gen_ct, &wqe->generic,
+ ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
+ abort_tag = iocbq->iocb.un.acxri.abortIoTag;
+ wqe->generic.abort_tag = abort_tag;
+ /*
+ * The abort handler will send us CMD_ABORT_XRI_CN or
+ * CMD_CLOSE_XRI_CN and the fw only accepts CMD_ABORT_XRI_CX
+ */
+ bf_set(lpfc_wqe_gen_command, &wqe->generic, CMD_ABORT_XRI_CX);
+ cmnd = CMD_ABORT_XRI_CX;
+ command_type = OTHER_COMMAND;
+ xritag = 0;
+ break;
+ case CMD_XRI_ABORTED_CX:
+ case CMD_CREATE_XRI_CR: /* Do we expect to use this? */
+ /* words0-2 are all 0's no bde */
+ /* word3 and word4 are rsvrd */
+ wqe->words[3] = 0;
+ wqe->words[4] = 0;
+ /* word5 iocb=rsvd wge=did */
+ /* There is no remote port id in the IOCB? */
+ /* Let this fall through and fail */
+ case CMD_IOCB_FCP_IBIDIR64_CR: /* bidirectional xfer */
+ case CMD_FCP_TSEND64_CX: /* Target mode send xfer-ready */
+ case CMD_FCP_TRSP64_CX: /* Target mode rcv */
+ case CMD_FCP_AUTO_TRSP_CX: /* Auto target rsp */
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2014 Invalid command 0x%x\n",
+ iocbq->iocb.ulpCommand);
+ return IOCB_ERROR;
+ break;
+
+ }
+ bf_set(lpfc_wqe_gen_xri, &wqe->generic, xritag);
+ bf_set(lpfc_wqe_gen_request_tag, &wqe->generic, iocbq->iotag);
+ wqe->generic.abort_tag = abort_tag;
+ bf_set(lpfc_wqe_gen_cmd_type, &wqe->generic, command_type);
+ bf_set(lpfc_wqe_gen_command, &wqe->generic, cmnd);
+ bf_set(lpfc_wqe_gen_class, &wqe->generic, iocbq->iocb.ulpClass);
+ bf_set(lpfc_wqe_gen_cq_id, &wqe->generic, LPFC_WQE_CQ_ID_DEFAULT);
+
+ return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb_s4 - SLI4 device lockless ver of lpfc_sli_issue_iocb
+ * @phba: Pointer to HBA context object.
+ * @ring_number: SLI ring number to issue iocb on.
+ * @piocb: Pointer to command iocb.
+ * @flag: Flag indicating if this command can be put into txq.
+ *
+ * __lpfc_sli_issue_iocb_s4 is used by other functions in the driver to issue
+ * an iocb command to an HBA with SLI-4 interface spec.
+ *
+ * This function is called with hbalock held. The function will return success
+ * after it successfully submit the iocb to firmware or after adding to the
+ * txq.
+ **/
+static int
+__lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ struct lpfc_sglq *sglq;
+ uint16_t xritag;
+ union lpfc_wqe wqe;
+ struct lpfc_sli_ring *pring = &phba->sli.ring[ring_number];
+ uint32_t fcp_wqidx;
+
+ if (piocb->sli4_xritag == NO_XRI) {
+ if (piocb->iocb.ulpCommand == CMD_ABORT_XRI_CN ||
+ piocb->iocb.ulpCommand == CMD_CLOSE_XRI_CN)
+ sglq = NULL;
+ else {
+ sglq = __lpfc_sli_get_sglq(phba);
+ if (!sglq)
+ return IOCB_ERROR;
+ piocb->sli4_xritag = sglq->sli4_xritag;
+ }
+ } else if (piocb->iocb_flag & LPFC_IO_FCP) {
+ sglq = NULL; /* These IO's already have an XRI and
+ * a mapped sgl.
+ */
+ } else {
+ /* This is a continuation of a commandi,(CX) so this
+ * sglq is on the active list
+ */
+ sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag);
+ if (!sglq)
+ return IOCB_ERROR;
+ }
+
+ if (sglq) {
+ xritag = lpfc_sli4_bpl2sgl(phba, piocb, sglq);
+ if (xritag != sglq->sli4_xritag)
+ return IOCB_ERROR;
+ }
+
+ if (lpfc_sli4_iocb2wqe(phba, piocb, &wqe))
+ return IOCB_ERROR;
+
+ if (piocb->iocb_flag & LPFC_IO_FCP) {
+ fcp_wqidx = lpfc_sli4_scmd_to_wqidx_distr(phba, piocb);
+ if (lpfc_sli4_wq_put(phba->sli4_hba.fcp_wq[fcp_wqidx], &wqe))
+ return IOCB_ERROR;
+ } else {
+ if (lpfc_sli4_wq_put(phba->sli4_hba.els_wq, &wqe))
+ return IOCB_ERROR;
+ }
+ lpfc_sli_ringtxcmpl_put(phba, pring, piocb);
+
+ return 0;
+}
+
+/**
+ * __lpfc_sli_issue_iocb - Wrapper func of lockless version for issuing iocb
+ *
+ * This routine wraps the actual lockless version for issusing IOCB function
+ * pointer from the lpfc_hba struct.
+ *
+ * Return codes:
+ * IOCB_ERROR - Error
+ * IOCB_SUCCESS - Success
+ * IOCB_BUSY - Busy
+ **/
+static inline int
+__lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
+ struct lpfc_iocbq *piocb, uint32_t flag)
+{
+ return phba->__lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
+}
+
+/**
+ * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * @phba: The hba struct for which this call is being executed.
+ * @dev_grp: The HBA PCI-Device group number.
+ *
+ * This routine sets up the SLI interface API function jump table in @phba
+ * struct.
+ * Returns: 0 - success, -ENODEV - failure.
+ **/
+int
+lpfc_sli_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
+{
+
+ switch (dev_grp) {
+ case LPFC_PCI_DEV_LP:
+ phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s3;
+ phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s3;
+ break;
+ case LPFC_PCI_DEV_OC:
+ phba->__lpfc_sli_issue_iocb = __lpfc_sli_issue_iocb_s4;
+ phba->__lpfc_sli_release_iocbq = __lpfc_sli_release_iocbq_s4;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1419 Invalid HBA PCI-device group: 0x%x\n",
+ dev_grp);
+ return -ENODEV;
+ break;
+ }
+ phba->lpfc_get_iocb_from_iocbq = lpfc_get_iocb_from_iocbq;
+ return 0;
+}
/**
* lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
@@ -3848,14 +6126,14 @@
* functions which do not hold hbalock.
**/
int
-lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
+lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
struct lpfc_iocbq *piocb, uint32_t flag)
{
unsigned long iflags;
int rc;
spin_lock_irqsave(&phba->hbalock, iflags);
- rc = __lpfc_sli_issue_iocb(phba, pring, piocb, flag);
+ rc = __lpfc_sli_issue_iocb(phba, ring_number, piocb, flag);
spin_unlock_irqrestore(&phba->hbalock, iflags);
return rc;
@@ -4148,6 +6426,52 @@
}
/**
+ * lpfc_sli_mbox_sys_flush - Flush mailbox command sub-system
+ * @phba: Pointer to HBA context object.
+ *
+ * This routine flushes the mailbox command subsystem. It will unconditionally
+ * flush all the mailbox commands in the three possible stages in the mailbox
+ * command sub-system: pending mailbox command queue; the outstanding mailbox
+ * command; and completed mailbox command queue. It is caller's responsibility
+ * to make sure that the driver is in the proper state to flush the mailbox
+ * command sub-system. Namely, the posting of mailbox commands into the
+ * pending mailbox command queue from the various clients must be stopped;
+ * either the HBA is in a state that it will never works on the outstanding
+ * mailbox command (such as in EEH or ERATT conditions) or the outstanding
+ * mailbox command has been completed.
+ **/
+static void
+lpfc_sli_mbox_sys_flush(struct lpfc_hba *phba)
+{
+ LIST_HEAD(completions);
+ struct lpfc_sli *psli = &phba->sli;
+ LPFC_MBOXQ_t *pmb;
+ unsigned long iflag;
+
+ /* Flush all the mailbox commands in the mbox system */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ /* The pending mailbox command queue */
+ list_splice_init(&phba->sli.mboxq, &completions);
+ /* The outstanding active mailbox command */
+ if (psli->mbox_active) {
+ list_add_tail(&psli->mbox_active->list, &completions);
+ psli->mbox_active = NULL;
+ psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ }
+ /* The completed mailbox command queue */
+ list_splice_init(&phba->sli.mboxq_cmpl, &completions);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+
+ /* Return all flushed mailbox commands with MBX_NOT_FINISHED status */
+ while (!list_empty(&completions)) {
+ list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
+ pmb->u.mb.mbxStatus = MBX_NOT_FINISHED;
+ if (pmb->mbox_cmpl)
+ pmb->mbox_cmpl(phba, pmb);
+ }
+}
+
+/**
* lpfc_sli_host_down - Vport cleanup function
* @vport: Pointer to virtual port object.
*
@@ -4240,9 +6564,11 @@
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *buf_ptr;
- LPFC_MBOXQ_t *pmb;
- int i;
unsigned long flags = 0;
+ int i;
+
+ /* Shutdown the mailbox command sub-system */
+ lpfc_sli_mbox_sys_shutdown(phba);
lpfc_hba_down_prep(phba);
@@ -4287,28 +6613,42 @@
/* Return any active mbox cmds */
del_timer_sync(&psli->mbox_tmo);
- spin_lock_irqsave(&phba->hbalock, flags);
- spin_lock(&phba->pport->work_port_lock);
+ spin_lock_irqsave(&phba->pport->work_port_lock, flags);
phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
- spin_unlock(&phba->pport->work_port_lock);
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
- /* Return any pending or completed mbox cmds */
- list_splice_init(&phba->sli.mboxq, &completions);
- if (psli->mbox_active) {
- list_add_tail(&psli->mbox_active->list, &completions);
- psli->mbox_active = NULL;
- psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
- }
- list_splice_init(&phba->sli.mboxq_cmpl, &completions);
- spin_unlock_irqrestore(&phba->hbalock, flags);
+ return 1;
+}
- while (!list_empty(&completions)) {
- list_remove_head(&completions, pmb, LPFC_MBOXQ_t, list);
- pmb->mb.mbxStatus = MBX_NOT_FINISHED;
- if (pmb->mbox_cmpl)
- pmb->mbox_cmpl(phba,pmb);
- }
+/**
+ * lpfc_sli4_hba_down - PCI function resource cleanup for the SLI4 HBA
+ * @phba: Pointer to HBA context object.
+ *
+ * This function cleans up all queues, iocb, buffers, mailbox commands while
+ * shutting down the SLI4 HBA FCoE function. This function is called with no
+ * lock held and always returns 1.
+ *
+ * This function does the following to cleanup driver FCoE function resources:
+ * - Free discovery resources for each virtual port
+ * - Cleanup any pending fabric iocbs
+ * - Iterate through the iocb txq and free each entry in the list.
+ * - Free up any buffer posted to the HBA.
+ * - Clean up all the queue entries: WQ, RQ, MQ, EQ, CQ, etc.
+ * - Free mailbox commands in the mailbox queue.
+ **/
+int
+lpfc_sli4_hba_down(struct lpfc_hba *phba)
+{
+ /* Stop the SLI4 device port */
+ lpfc_stop_port(phba);
+
+ /* Tear down the queues in the HBA */
+ lpfc_sli4_queue_unset(phba);
+
+ /* unregister default FCFI from the HBA */
+ lpfc_sli4_fcfi_unreg(phba, phba->fcf.fcfi);
+
return 1;
}
@@ -4639,7 +6979,10 @@
iabt = &abtsiocbp->iocb;
iabt->un.acxri.abortType = ABORT_TYPE_ABTS;
iabt->un.acxri.abortContextTag = icmd->ulpContext;
- iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ iabt->un.acxri.abortIoTag = cmdiocb->sli4_xritag;
+ else
+ iabt->un.acxri.abortIoTag = icmd->ulpIoTag;
iabt->ulpLe = 1;
iabt->ulpClass = icmd->ulpClass;
@@ -4655,7 +6998,7 @@
"abort cmd iotag x%x\n",
iabt->un.acxri.abortContextTag,
iabt->un.acxri.abortIoTag, abtsiocbp->iotag);
- retval = __lpfc_sli_issue_iocb(phba, pring, abtsiocbp, 0);
+ retval = __lpfc_sli_issue_iocb(phba, pring->ringno, abtsiocbp, 0);
if (retval)
__lpfc_sli_release_iocbq(phba, abtsiocbp);
@@ -4838,7 +7181,10 @@
cmd = &iocbq->iocb;
abtsiocb->iocb.un.acxri.abortType = ABORT_TYPE_ABTS;
abtsiocb->iocb.un.acxri.abortContextTag = cmd->ulpContext;
- abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ abtsiocb->iocb.un.acxri.abortIoTag = iocbq->sli4_xritag;
+ else
+ abtsiocb->iocb.un.acxri.abortIoTag = cmd->ulpIoTag;
abtsiocb->iocb.ulpLe = 1;
abtsiocb->iocb.ulpClass = cmd->ulpClass;
abtsiocb->vport = phba->pport;
@@ -4850,7 +7196,8 @@
/* Setup callback routine and issue the command. */
abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
- ret_val = lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0);
+ ret_val = lpfc_sli_issue_iocb(phba, pring->ringno,
+ abtsiocb, 0);
if (ret_val == IOCB_ERROR) {
lpfc_sli_release_iocbq(phba, abtsiocb);
errcnt++;
@@ -4931,7 +7278,7 @@
**/
int
lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
- struct lpfc_sli_ring *pring,
+ uint32_t ring_number,
struct lpfc_iocbq *piocb,
struct lpfc_iocbq *prspiocbq,
uint32_t timeout)
@@ -4962,7 +7309,7 @@
readl(phba->HCregaddr); /* flush */
}
- retval = lpfc_sli_issue_iocb(phba, pring, piocb, 0);
+ retval = lpfc_sli_issue_iocb(phba, ring_number, piocb, 0);
if (retval == IOCB_SUCCESS) {
timeout_req = timeout * HZ;
timeleft = wait_event_timeout(done_q,
@@ -5077,53 +7424,156 @@
}
/**
- * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
+ * lpfc_sli_mbox_sys_shutdown - shutdown mailbox command sub-system
* @phba: Pointer to HBA context.
*
- * This function is called to cleanup any pending mailbox
- * objects in the driver queue before bringing the HBA offline.
- * This function is called while resetting the HBA.
- * The function is called without any lock held. The function
- * takes hbalock to update SLI data structure.
- * This function returns 1 when there is an active mailbox
- * command pending else returns 0.
+ * This function is called to shutdown the driver's mailbox sub-system.
+ * It first marks the mailbox sub-system is in a block state to prevent
+ * the asynchronous mailbox command from issued off the pending mailbox
+ * command queue. If the mailbox command sub-system shutdown is due to
+ * HBA error conditions such as EEH or ERATT, this routine shall invoke
+ * the mailbox sub-system flush routine to forcefully bring down the
+ * mailbox sub-system. Otherwise, if it is due to normal condition (such
+ * as with offline or HBA function reset), this routine will wait for the
+ * outstanding mailbox command to complete before invoking the mailbox
+ * sub-system flush routine to gracefully bring down mailbox sub-system.
**/
-int
-lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
+void
+lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
{
- struct lpfc_vport *vport = phba->pport;
- int i = 0;
+ struct lpfc_sli *psli = &phba->sli;
+ uint8_t actcmd = MBX_HEARTBEAT;
+ unsigned long timeout;
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag |= LPFC_SLI_ASYNC_MBX_BLK;
+ spin_unlock_irq(&phba->hbalock);
+
+ if (psli->sli_flag & LPFC_SLI_ACTIVE) {
+ spin_lock_irq(&phba->hbalock);
+ if (phba->sli.mbox_active)
+ actcmd = phba->sli.mbox_active->u.mb.mbxCommand;
+ spin_unlock_irq(&phba->hbalock);
+ /* Determine how long we might wait for the active mailbox
+ * command to be gracefully completed by firmware.
+ */
+ timeout = msecs_to_jiffies(lpfc_mbox_tmo_val(phba, actcmd) *
+ 1000) + jiffies;
+ while (phba->sli.mbox_active) {
+ /* Check active mailbox complete status every 2ms */
+ msleep(2);
+ if (time_after(jiffies, timeout))
+ /* Timeout, let the mailbox flush routine to
+ * forcefully release active mailbox command
+ */
+ break;
+ }
+ }
+ lpfc_sli_mbox_sys_flush(phba);
+}
+
+/**
+ * lpfc_sli_eratt_read - read sli-3 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI3 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli_eratt_read(struct lpfc_hba *phba)
+{
uint32_t ha_copy;
- while (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE && !vport->stopped) {
- if (i++ > LPFC_MBOX_TMO * 1000)
- return 1;
+ /* Read chip Host Attention (HA) register */
+ ha_copy = readl(phba->HAregaddr);
+ if (ha_copy & HA_ERATT) {
+ /* Read host status register to retrieve error event */
+ lpfc_sli_read_hs(phba);
- /*
- * Call lpfc_sli_handle_mb_event only if a mailbox cmd
- * did finish. This way we won't get the misleading
- * "Stray Mailbox Interrupt" message.
- */
+ /* Check if there is a deferred error condition is active */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag |= DEFER_ERATT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+
+ /* Set the driver HA work bitmap */
spin_lock_irq(&phba->hbalock);
- ha_copy = phba->work_ha;
- phba->work_ha &= ~HA_MBATT;
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
spin_unlock_irq(&phba->hbalock);
-
- if (ha_copy & HA_MBATT)
- if (lpfc_sli_handle_mb_event(phba) == 0)
- i = 0;
-
- msleep(1);
+ return 1;
}
+ return 0;
+}
- return (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE) ? 1 : 0;
+/**
+ * lpfc_sli4_eratt_read - read sli-4 error attention events
+ * @phba: Pointer to HBA context.
+ *
+ * This function is called to read the SLI4 device error attention registers
+ * for possible error attention events. The caller must hold the hostlock
+ * with spin_lock_irq().
+ *
+ * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * Register and returns 0 otherwise.
+ **/
+static int
+lpfc_sli4_eratt_read(struct lpfc_hba *phba)
+{
+ uint32_t uerr_sta_hi, uerr_sta_lo;
+ uint32_t onlnreg0, onlnreg1;
+
+ /* For now, use the SLI4 device internal unrecoverable error
+ * registers for error attention. This can be changed later.
+ */
+ onlnreg0 = readl(phba->sli4_hba.ONLINE0regaddr);
+ onlnreg1 = readl(phba->sli4_hba.ONLINE1regaddr);
+ if ((onlnreg0 != LPFC_ONLINE_NERR) || (onlnreg1 != LPFC_ONLINE_NERR)) {
+ uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
+ uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
+ if (uerr_sta_lo || uerr_sta_hi) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "1423 HBA Unrecoverable error: "
+ "uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+ "online0_reg=0x%x, online1_reg=0x%x\n",
+ uerr_sta_lo, uerr_sta_hi,
+ onlnreg0, onlnreg1);
+ /* TEMP: as the driver error recover logic is not
+ * fully developed, we just log the error message
+ * and the device error attention action is now
+ * temporarily disabled.
+ */
+ return 0;
+ phba->work_status[0] = uerr_sta_lo;
+ phba->work_status[1] = uerr_sta_hi;
+ spin_lock_irq(&phba->hbalock);
+ /* Set the driver HA work bitmap */
+ phba->work_ha |= HA_ERATT;
+ /* Indicate polling handles this ERATT */
+ phba->hba_flag |= HBA_ERATT_HANDLED;
+ spin_unlock_irq(&phba->hbalock);
+ return 1;
+ }
+ }
+ return 0;
}
/**
* lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
- * This function is called form timer soft interrupt context to check HBA's
+ * This function is called from timer soft interrupt context to check HBA's
* error attention register bit for error attention events.
*
* This fucntion returns 1 when there is Error Attention in the Host Attention
@@ -5134,10 +7584,6 @@
{
uint32_t ha_copy;
- /* If PCI channel is offline, don't process it */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return 0;
-
/* If somebody is waiting to handle an eratt, don't process it
* here. The brdkill function will do this.
*/
@@ -5161,56 +7607,84 @@
return 0;
}
- /* Read chip Host Attention (HA) register */
- ha_copy = readl(phba->HAregaddr);
- if (ha_copy & HA_ERATT) {
- /* Read host status register to retrieve error event */
- lpfc_sli_read_hs(phba);
-
- /* Check if there is a deferred error condition is active */
- if ((HS_FFER1 & phba->work_hs) &&
- ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
- HS_FFER6 | HS_FFER7) & phba->work_hs)) {
- phba->hba_flag |= DEFER_ERATT;
- /* Clear all interrupt enable conditions */
- writel(0, phba->HCregaddr);
- readl(phba->HCregaddr);
- }
-
- /* Set the driver HA work bitmap */
- phba->work_ha |= HA_ERATT;
- /* Indicate polling handles this ERATT */
- phba->hba_flag |= HBA_ERATT_HANDLED;
+ /* If PCI channel is offline, don't process it */
+ if (unlikely(pci_channel_offline(phba->pcidev))) {
spin_unlock_irq(&phba->hbalock);
- return 1;
+ return 0;
+ }
+
+ switch (phba->sli_rev) {
+ case LPFC_SLI_REV2:
+ case LPFC_SLI_REV3:
+ /* Read chip Host Attention (HA) register */
+ ha_copy = lpfc_sli_eratt_read(phba);
+ break;
+ case LPFC_SLI_REV4:
+ /* Read devcie Uncoverable Error (UERR) registers */
+ ha_copy = lpfc_sli4_eratt_read(phba);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0299 Invalid SLI revision (%d)\n",
+ phba->sli_rev);
+ ha_copy = 0;
+ break;
}
spin_unlock_irq(&phba->hbalock);
+
+ return ha_copy;
+}
+
+/**
+ * lpfc_intr_state_check - Check device state for interrupt handling
+ * @phba: Pointer to HBA context.
+ *
+ * This inline routine checks whether a device or its PCI slot is in a state
+ * that the interrupt should be handled.
+ *
+ * This function returns 0 if the device or the PCI slot is in a state that
+ * interrupt should be handled, otherwise -EIO.
+ */
+static inline int
+lpfc_intr_state_check(struct lpfc_hba *phba)
+{
+ /* If the pci channel is offline, ignore all the interrupts */
+ if (unlikely(pci_channel_offline(phba->pcidev)))
+ return -EIO;
+
+ /* Update device level interrupt statistics */
+ phba->sli.slistat.sli_intr++;
+
+ /* Ignore all interrupts during initialization. */
+ if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ return -EIO;
+
return 0;
}
/**
- * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
+ * lpfc_sli_sp_intr_handler - Slow-path interrupt handler to SLI-3 device
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
* This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there are slow-path events in the HBA. However,
- * when the device is enabled with either MSI or Pin-IRQ interrupt mode,
- * this function is called as part of the device-level interrupt handler.
- * When the PCI slot is in error recovery or the HBA is undergoing
- * initialization, the interrupt handler will not process the interrupt.
- * The link attention and ELS ring attention events are handled by the
- * worker thread. The interrupt handler signals the worker thread and
- * and returns for these events. This function is called without any
- * lock held. It gets the hbalock to access and update SLI data
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA
+ * is undergoing initialization, the interrupt handler will not process
+ * the interrupt. The link attention and ELS ring attention events are
+ * handled by the worker thread. The interrupt handler signals the worker
+ * thread and returns for these events. This function is called without
+ * any lock held. It gets the hbalock to access and update SLI data
* structures.
*
* This function returns IRQ_HANDLED when interrupt is handled else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_sp_intr_handler(int irq, void *dev_id)
+lpfc_sli_sp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
uint32_t ha_copy;
@@ -5240,13 +7714,8 @@
* individual interrupt handler in MSI-X multi-message interrupt mode
*/
if (phba->intr_type == MSIX) {
- /* If the pci channel is offline, ignore all the interrupts */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
- /* Update device-level interrupt statistics */
- phba->sli.slistat.sli_intr++;
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
/* Need to read HA REG for slow-path events */
spin_lock_irqsave(&phba->hbalock, iflag);
@@ -5271,7 +7740,7 @@
* interrupt.
*/
if (unlikely(phba->hba_flag & DEFER_ERATT)) {
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
return IRQ_NONE;
}
@@ -5364,7 +7833,7 @@
if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
- pmbox = &pmb->mb;
+ pmbox = &pmb->u.mb;
mbox = phba->mbox;
vport = pmb->vport;
@@ -5434,7 +7903,8 @@
LOG_MBOX | LOG_SLI,
"0350 rc should have"
"been MBX_BUSY");
- goto send_current_mbox;
+ if (rc != MBX_NOT_FINISHED)
+ goto send_current_mbox;
}
}
spin_lock_irqsave(
@@ -5471,29 +7941,29 @@
}
return IRQ_HANDLED;
-} /* lpfc_sp_intr_handler */
+} /* lpfc_sli_sp_intr_handler */
/**
- * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
+ * lpfc_sli_fp_intr_handler - Fast-path interrupt handler to SLI-3 device.
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
* This function is directly called from the PCI layer as an interrupt
- * service routine when the device is enabled with MSI-X multi-message
- * interrupt mode and there is a fast-path FCP IOCB ring event in the
- * HBA. However, when the device is enabled with either MSI or Pin-IRQ
- * interrupt mode, this function is called as part of the device-level
- * interrupt handler. When the PCI slot is in error recovery or the HBA
- * is undergoing initialization, the interrupt handler will not process
- * the interrupt. The SCSI FCP fast-path ring event are handled in the
- * intrrupt context. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * service routine when device with SLI-3 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures.
*
* This function returns IRQ_HANDLED when interrupt is handled else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_fp_intr_handler(int irq, void *dev_id)
+lpfc_sli_fp_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
uint32_t ha_copy;
@@ -5513,13 +7983,8 @@
* individual interrupt handler in MSI-X multi-message interrupt mode
*/
if (phba->intr_type == MSIX) {
- /* If pci channel is offline, ignore all the interrupts */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
- /* Update device-level interrupt statistics */
- phba->sli.slistat.sli_intr++;
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
/* Need to read HA REG for FCP ring and other ring events */
ha_copy = readl(phba->HAregaddr);
@@ -5530,7 +7995,7 @@
* any interrupt.
*/
if (unlikely(phba->hba_flag & DEFER_ERATT)) {
- spin_unlock_irq(&phba->hbalock);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
return IRQ_NONE;
}
writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
@@ -5566,26 +8031,27 @@
}
}
return IRQ_HANDLED;
-} /* lpfc_fp_intr_handler */
+} /* lpfc_sli_fp_intr_handler */
/**
- * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
+ * lpfc_sli_intr_handler - Device-level interrupt handler to SLI-3 device
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
- * This function is the device-level interrupt handler called from the PCI
- * layer when either MSI or Pin-IRQ interrupt mode is enabled and there is
- * an event in the HBA which requires driver attention. This function
- * invokes the slow-path interrupt attention handling function and fast-path
- * interrupt attention handling function in turn to process the relevant
- * HBA attention events. This function is called without any lock held. It
- * gets the hbalock to access and update SLI data structures.
+ * This function is the HBA device-level interrupt handler to device with
+ * SLI-3 interface spec, called from the PCI layer when either MSI or
+ * Pin-IRQ interrupt mode is enabled and there is an event in the HBA which
+ * requires driver attention. This function invokes the slow-path interrupt
+ * attention handling function and fast-path interrupt attention handling
+ * function in turn to process the relevant HBA attention events. This
+ * function is called without any lock held. It gets the hbalock to access
+ * and update SLI data structures.
*
* This function returns IRQ_HANDLED when interrupt is handled, else it
* returns IRQ_NONE.
**/
irqreturn_t
-lpfc_intr_handler(int irq, void *dev_id)
+lpfc_sli_intr_handler(int irq, void *dev_id)
{
struct lpfc_hba *phba;
irqreturn_t sp_irq_rc, fp_irq_rc;
@@ -5600,15 +8066,8 @@
if (unlikely(!phba))
return IRQ_NONE;
- /* If the pci channel is offline, ignore all the interrupts. */
- if (unlikely(pci_channel_offline(phba->pcidev)))
- return IRQ_NONE;
-
- /* Update device level interrupt statistics */
- phba->sli.slistat.sli_intr++;
-
- /* Ignore all interrupts during initialization. */
- if (unlikely(phba->link_state < LPFC_LINK_DOWN))
+ /* Check device state for handling interrupt */
+ if (lpfc_intr_state_check(phba))
return IRQ_NONE;
spin_lock(&phba->hbalock);
@@ -5650,7 +8109,7 @@
status2 >>= (4*LPFC_ELS_RING);
if (status1 || (status2 & HA_RXMASK))
- sp_irq_rc = lpfc_sp_intr_handler(irq, dev_id);
+ sp_irq_rc = lpfc_sli_sp_intr_handler(irq, dev_id);
else
sp_irq_rc = IRQ_NONE;
@@ -5670,10 +8129,3322 @@
status2 = 0;
if ((status1 & HA_RXMASK) || (status2 & HA_RXMASK))
- fp_irq_rc = lpfc_fp_intr_handler(irq, dev_id);
+ fp_irq_rc = lpfc_sli_fp_intr_handler(irq, dev_id);
else
fp_irq_rc = IRQ_NONE;
/* Return device-level interrupt handling status */
return (sp_irq_rc == IRQ_HANDLED) ? sp_irq_rc : fp_irq_rc;
-} /* lpfc_intr_handler */
+} /* lpfc_sli_intr_handler */
+
+/**
+ * lpfc_sli4_fcp_xri_abort_event_proc - Process fcp xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 FCP abort XRI events.
+ **/
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the fcp xri abort event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~FCP_XRI_ABORT_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the fcp xri abort events */
+ while (!list_empty(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_fcp_xri_aborted_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Notify aborted XRI for FCP work queue */
+ lpfc_sli4_fcp_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+ /* Free the event processed back to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+/**
+ * lpfc_sli4_els_xri_abort_event_proc - Process els xri abort event
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked by the worker thread to process all the pending
+ * SLI4 els abort xri events.
+ **/
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *phba)
+{
+ struct lpfc_cq_event *cq_event;
+
+ /* First, declare the els xri abort event has been handled */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~ELS_XRI_ABORT_EVENT;
+ spin_unlock_irq(&phba->hbalock);
+ /* Now, handle all the els xri abort events */
+ while (!list_empty(&phba->sli4_hba.sp_els_xri_aborted_work_queue)) {
+ /* Get the first event from the head of the event queue */
+ spin_lock_irq(&phba->hbalock);
+ list_remove_head(&phba->sli4_hba.sp_els_xri_aborted_work_queue,
+ cq_event, struct lpfc_cq_event, list);
+ spin_unlock_irq(&phba->hbalock);
+ /* Notify aborted XRI for ELS work queue */
+ lpfc_sli4_els_xri_aborted(phba, &cq_event->cqe.wcqe_axri);
+ /* Free the event processed back to the free pool */
+ lpfc_sli4_cq_event_release(phba, cq_event);
+ }
+}
+
+static void
+lpfc_sli4_iocb_param_transfer(struct lpfc_iocbq *pIocbIn,
+ struct lpfc_iocbq *pIocbOut,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ size_t offset = offsetof(struct lpfc_iocbq, iocb);
+
+ memcpy((char *)pIocbIn + offset, (char *)pIocbOut + offset,
+ sizeof(struct lpfc_iocbq) - offset);
+ memset(&pIocbIn->sli4_info, 0,
+ sizeof(struct lpfc_sli4_rspiocb_info));
+ /* Map WCQE parameters into irspiocb parameters */
+ pIocbIn->iocb.ulpStatus = bf_get(lpfc_wcqe_c_status, wcqe);
+ if (pIocbOut->iocb_flag & LPFC_IO_FCP)
+ if (pIocbIn->iocb.ulpStatus == IOSTAT_FCP_RSP_ERROR)
+ pIocbIn->iocb.un.fcpi.fcpi_parm =
+ pIocbOut->iocb.un.fcpi.fcpi_parm -
+ wcqe->total_data_placed;
+ else
+ pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+ else
+ pIocbIn->iocb.un.ulpWord[4] = wcqe->parameter;
+ /* Load in additional WCQE parameters */
+ pIocbIn->sli4_info.hw_status = bf_get(lpfc_wcqe_c_hw_status, wcqe);
+ pIocbIn->sli4_info.bfield = 0;
+ if (bf_get(lpfc_wcqe_c_xb, wcqe))
+ pIocbIn->sli4_info.bfield |= LPFC_XB;
+ if (bf_get(lpfc_wcqe_c_pv, wcqe)) {
+ pIocbIn->sli4_info.bfield |= LPFC_PV;
+ pIocbIn->sli4_info.priority =
+ bf_get(lpfc_wcqe_c_priority, wcqe);
+ }
+}
+
+/**
+ * lpfc_sli4_sp_handle_async_event - Handle an asynchroous event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with asynchrous
+ * event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_async_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "0392 Async Event: word0:x%x, word1:x%x, "
+ "word2:x%x, word3:x%x\n", mcqe->word0,
+ mcqe->mcqe_tag0, mcqe->mcqe_tag1, mcqe->trailer);
+
+ /* Allocate a new internal CQ_EVENT entry */
+ cq_event = lpfc_sli4_cq_event_alloc(phba);
+ if (!cq_event) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0394 Failed to allocate CQ_EVENT entry\n");
+ return false;
+ }
+
+ /* Move the CQE into an asynchronous event entry */
+ memcpy(&cq_event->cqe, mcqe, sizeof(struct lpfc_mcqe));
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list, &phba->sli4_hba.sp_asynce_work_queue);
+ /* Set the async event flag */
+ phba->hba_flag |= ASYNC_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ return true;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mbox_event - Handle a mailbox completion event
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry with mailbox
+ * completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mbox_event(struct lpfc_hba *phba, struct lpfc_mcqe *mcqe)
+{
+ uint32_t mcqe_status;
+ MAILBOX_t *mbox, *pmbox;
+ struct lpfc_mqe *mqe;
+ struct lpfc_vport *vport;
+ struct lpfc_nodelist *ndlp;
+ struct lpfc_dmabuf *mp;
+ unsigned long iflags;
+ LPFC_MBOXQ_t *pmb;
+ bool workposted = false;
+ int rc;
+
+ /* If not a mailbox complete MCQE, out by checking mailbox consume */
+ if (!bf_get(lpfc_trailer_completed, mcqe))
+ goto out_no_mqe_complete;
+
+ /* Get the reference to the active mbox command */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pmb = phba->sli.mbox_active;
+ if (unlikely(!pmb)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "1832 No pending MBOX command to handle\n");
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ goto out_no_mqe_complete;
+ }
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ mqe = &pmb->u.mqe;
+ pmbox = (MAILBOX_t *)&pmb->u.mqe;
+ mbox = phba->mbox;
+ vport = pmb->vport;
+
+ /* Reset heartbeat timer */
+ phba->last_completion_time = jiffies;
+ del_timer(&phba->sli.mbox_tmo);
+
+ /* Move mbox data to caller's mailbox region, do endian swapping */
+ if (pmb->mbox_cmpl && mbox)
+ lpfc_sli_pcimem_bcopy(mbox, mqe, sizeof(struct lpfc_mqe));
+ /* Set the mailbox status with SLI4 range 0x4000 */
+ mcqe_status = bf_get(lpfc_mcqe_status, mcqe);
+ if (mcqe_status != MB_CQE_STATUS_SUCCESS)
+ bf_set(lpfc_mqe_status, mqe,
+ (LPFC_MBX_ERROR_RANGE | mcqe_status));
+
+ if (pmb->mbox_flag & LPFC_MBX_IMED_UNREG) {
+ pmb->mbox_flag &= ~LPFC_MBX_IMED_UNREG;
+ lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_MBOX_VPORT,
+ "MBOX dflt rpi: status:x%x rpi:x%x",
+ mcqe_status,
+ pmbox->un.varWords[0], 0);
+ if (mcqe_status == MB_CQE_STATUS_SUCCESS) {
+ mp = (struct lpfc_dmabuf *)(pmb->context1);
+ ndlp = (struct lpfc_nodelist *)pmb->context2;
+ /* Reg_LOGIN of dflt RPI was successful. Now lets get
+ * RID of the PPI using the same mbox buffer.
+ */
+ lpfc_unreg_login(phba, vport->vpi,
+ pmbox->un.varWords[0], pmb);
+ pmb->mbox_cmpl = lpfc_mbx_cmpl_dflt_rpi;
+ pmb->context1 = mp;
+ pmb->context2 = ndlp;
+ pmb->vport = vport;
+ rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+ if (rc != MBX_BUSY)
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
+ LOG_SLI, "0385 rc should "
+ "have been MBX_BUSY\n");
+ if (rc != MBX_NOT_FINISHED)
+ goto send_current_mbox;
+ }
+ }
+ spin_lock_irqsave(&phba->pport->work_port_lock, iflags);
+ phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
+ spin_unlock_irqrestore(&phba->pport->work_port_lock, iflags);
+
+ /* There is mailbox completion work to do */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ __lpfc_mbox_cmpl_put(phba, pmb);
+ phba->work_ha |= HA_MBATT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+
+send_current_mbox:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ /* Release the mailbox command posting token */
+ phba->sli.sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
+ /* Setting active mailbox pointer need to be in sync to flag clear */
+ phba->sli.mbox_active = NULL;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ /* Wake up worker thread to post the next pending mailbox command */
+ lpfc_worker_wake_up(phba);
+out_no_mqe_complete:
+ if (bf_get(lpfc_trailer_consumed, mcqe))
+ lpfc_sli4_mq_release(phba->sli4_hba.mbx_wq);
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_mcqe - Process a mailbox completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cqe: Pointer to mailbox completion queue entry.
+ *
+ * This routine process a mailbox completion queue entry, it invokes the
+ * proper mailbox complete handling or asynchrous event handling routine
+ * according to the MCQE's async bit.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_mcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+ struct lpfc_mcqe mcqe;
+ bool workposted;
+
+ /* Copy the mailbox MCQE and convert endian order as needed */
+ lpfc_sli_pcimem_bcopy(cqe, &mcqe, sizeof(struct lpfc_mcqe));
+
+ /* Invoke the proper event handling routine */
+ if (!bf_get(lpfc_trailer_async, &mcqe))
+ workposted = lpfc_sli4_sp_handle_mbox_event(phba, &mcqe);
+ else
+ workposted = lpfc_sli4_sp_handle_async_event(phba, &mcqe);
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_els_wcqe - Handle els work-queue completion event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an ELS work-queue completion event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_els_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_iocbq *irspiocbq;
+ unsigned long iflags;
+ bool workposted = false;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pring->stats.iocb_event++;
+ /* Look up the ELS command IOCB and create pseudo response IOCB */
+ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ if (unlikely(!cmdiocbq)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0386 ELS complete with no corresponding "
+ "cmdiocb: iotag (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return workposted;
+ }
+
+ /* Fake the irspiocbq and copy necessary response information */
+ irspiocbq = lpfc_sli_get_iocbq(phba);
+ if (!irspiocbq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0387 Failed to allocate an iocbq\n");
+ return workposted;
+ }
+ lpfc_sli4_iocb_param_transfer(irspiocbq, cmdiocbq, wcqe);
+
+ /* Add the irspiocb to the response IOCB work list */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&irspiocbq->list, &phba->sli4_hba.sp_rspiocb_work_queue);
+ /* Indicate ELS ring attention */
+ phba->work_ha |= (HA_R0ATT << (4*LPFC_ELS_RING));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rel_wcqe - Handle slow-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles slow-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_sp_handle_rel_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_release *wcqe)
+{
+ /* Check for the slow-path ELS work queue */
+ if (bf_get(lpfc_wcqe_r_wq_id, wcqe) == phba->sli4_hba.els_wq->queue_id)
+ lpfc_sli4_wq_release(phba->sli4_hba.els_wq,
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+ else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2579 Slow-path wqe consume event carries "
+ "miss-matched qid: wcqe-qid=x%x, sp-qid=x%x\n",
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe),
+ phba->sli4_hba.els_wq->queue_id);
+}
+
+/**
+ * lpfc_sli4_sp_handle_abort_xri_wcqe - Handle a xri abort event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to a WQ completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an XRI abort event.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_abort_xri_wcqe(struct lpfc_hba *phba,
+ struct lpfc_queue *cq,
+ struct sli4_wcqe_xri_aborted *wcqe)
+{
+ bool workposted = false;
+ struct lpfc_cq_event *cq_event;
+ unsigned long iflags;
+
+ /* Allocate a new internal CQ_EVENT entry */
+ cq_event = lpfc_sli4_cq_event_alloc(phba);
+ if (!cq_event) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0602 Failed to allocate CQ_EVENT entry\n");
+ return false;
+ }
+
+ /* Move the CQE into the proper xri abort event list */
+ memcpy(&cq_event->cqe, wcqe, sizeof(struct sli4_wcqe_xri_aborted));
+ switch (cq->subtype) {
+ case LPFC_FCP:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_fcp_xri_aborted_work_queue);
+ /* Set the fcp xri abort event flag */
+ phba->hba_flag |= FCP_XRI_ABORT_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ case LPFC_ELS:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ list_add_tail(&cq_event->list,
+ &phba->sli4_hba.sp_els_xri_aborted_work_queue);
+ /* Set the els xri abort event flag */
+ phba->hba_flag |= ELS_XRI_ABORT_EVENT;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0603 Invalid work queue CQE subtype (x%x)\n",
+ cq->subtype);
+ workposted = false;
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_wcqe - Process a work-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to the completion queue.
+ * @wcqe: Pointer to a completion queue entry.
+ *
+ * This routine process a slow-path work-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_cqe *cqe)
+{
+ struct lpfc_wcqe_complete wcqe;
+ bool workposted = false;
+
+ /* Copy the work queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+ /* Check and process for different type of WCQE and dispatch */
+ switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+ case CQE_CODE_COMPL_WQE:
+ /* Process the WQ complete event */
+ workposted = lpfc_sli4_sp_handle_els_wcqe(phba,
+ (struct lpfc_wcqe_complete *)&wcqe);
+ break;
+ case CQE_CODE_RELEASE_WQE:
+ /* Process the WQ release event */
+ lpfc_sli4_sp_handle_rel_wcqe(phba,
+ (struct lpfc_wcqe_release *)&wcqe);
+ break;
+ case CQE_CODE_XRI_ABORTED:
+ /* Process the WQ XRI abort event */
+ workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+ (struct sli4_wcqe_xri_aborted *)&wcqe);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0388 Not a valid WCQE code: x%x\n",
+ bf_get(lpfc_wcqe_c_code, &wcqe));
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_sp_handle_rcqe - Process a receive-queue completion queue entry
+ * @phba: Pointer to HBA context object.
+ * @rcqe: Pointer to receive-queue completion queue entry.
+ *
+ * This routine process a receive-queue completion queue entry.
+ *
+ * Return: true if work posted to worker thread, otherwise false.
+ **/
+static bool
+lpfc_sli4_sp_handle_rcqe(struct lpfc_hba *phba, struct lpfc_cqe *cqe)
+{
+ struct lpfc_rcqe rcqe;
+ bool workposted = false;
+ struct lpfc_queue *hrq = phba->sli4_hba.hdr_rq;
+ struct lpfc_queue *drq = phba->sli4_hba.dat_rq;
+ struct hbq_dmabuf *dma_buf;
+ uint32_t status;
+ unsigned long iflags;
+
+ /* Copy the receive queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &rcqe, sizeof(struct lpfc_rcqe));
+ lpfc_sli4_rq_release(hrq, drq);
+ if (bf_get(lpfc_rcqe_code, &rcqe) != CQE_CODE_RECEIVE)
+ goto out;
+ if (bf_get(lpfc_rcqe_rq_id, &rcqe) != hrq->queue_id)
+ goto out;
+
+ status = bf_get(lpfc_rcqe_status, &rcqe);
+ switch (status) {
+ case FC_STATUS_RQ_BUF_LEN_EXCEEDED:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2537 Receive Frame Truncated!!\n");
+ case FC_STATUS_RQ_SUCCESS:
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ dma_buf = lpfc_sli_hbqbuf_get(&phba->hbqs[0].hbq_buffer_list);
+ if (!dma_buf) {
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ goto out;
+ }
+ memcpy(&dma_buf->rcqe, &rcqe, sizeof(rcqe));
+ /* save off the frame for the word thread to process */
+ list_add_tail(&dma_buf->dbuf.list, &phba->rb_pend_list);
+ /* Frame received */
+ phba->hba_flag |= HBA_RECEIVE_BUFFER;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ case FC_STATUS_INSUFF_BUF_NEED_BUF:
+ case FC_STATUS_INSUFF_BUF_FRM_DISC:
+ /* Post more buffers if possible */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ phba->hba_flag |= HBA_POST_RECEIVE_BUFFER;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ workposted = true;
+ break;
+ }
+out:
+ return workposted;
+
+}
+
+/**
+ * lpfc_sli4_sp_handle_eqe - Process a slow-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the slow-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on that completion queue, rearm the
+ * completion queue, and then return.
+ *
+ **/
+static void
+lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe)
+{
+ struct lpfc_queue *cq = NULL, *childq, *speq;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ int ecount = 0;
+ uint16_t cqid;
+
+ if (bf_get(lpfc_eqe_major_code, eqe) != 0 ||
+ bf_get(lpfc_eqe_minor_code, eqe) != 0) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0359 Not a valid slow-path completion "
+ "event: majorcode=x%x, minorcode=x%x\n",
+ bf_get(lpfc_eqe_major_code, eqe),
+ bf_get(lpfc_eqe_minor_code, eqe));
+ return;
+ }
+
+ /* Get the reference to the corresponding CQ */
+ cqid = bf_get(lpfc_eqe_resource_id, eqe);
+
+ /* Search for completion queue pointer matching this cqid */
+ speq = phba->sli4_hba.sp_eq;
+ list_for_each_entry(childq, &speq->child_list, list) {
+ if (childq->queue_id == cqid) {
+ cq = childq;
+ break;
+ }
+ }
+ if (unlikely(!cq)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0365 Slow-path CQ identifier (%d) does "
+ "not exist\n", cqid);
+ return;
+ }
+
+ /* Process all the entries to the CQ */
+ switch (cq->type) {
+ case LPFC_MCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_mcqe(phba, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ case LPFC_WCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_wcqe(phba, cq, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ case LPFC_RCQ:
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_sp_handle_rcqe(phba, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0370 Invalid completion queue type (%d)\n",
+ cq->type);
+ return;
+ }
+
+ /* Catch the no cq entry condition, log an error */
+ if (unlikely(ecount == 0))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0371 No entry from the CQ: identifier "
+ "(x%x), type (%d)\n", cq->queue_id, cq->type);
+
+ /* In any case, flash and re-arm the RCQ */
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+ /* wake up worker thread if there are works to be done */
+ if (workposted)
+ lpfc_worker_wake_up(phba);
+}
+
+/**
+ * lpfc_sli4_fp_handle_fcp_wcqe - Process fast-path work queue completion entry
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static void
+lpfc_sli4_fp_handle_fcp_wcqe(struct lpfc_hba *phba,
+ struct lpfc_wcqe_complete *wcqe)
+{
+ struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_FCP_RING];
+ struct lpfc_iocbq *cmdiocbq;
+ struct lpfc_iocbq irspiocbq;
+ unsigned long iflags;
+
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ pring->stats.iocb_event++;
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+ /* Check for response status */
+ if (unlikely(bf_get(lpfc_wcqe_c_status, wcqe))) {
+ /* If resource errors reported from HBA, reduce queue
+ * depth of the SCSI device.
+ */
+ if ((bf_get(lpfc_wcqe_c_status, wcqe) ==
+ IOSTAT_LOCAL_REJECT) &&
+ (wcqe->parameter == IOERR_NO_RESOURCES)) {
+ phba->lpfc_rampdown_queue_depth(phba);
+ }
+ /* Log the error status */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0373 FCP complete error: status=x%x, "
+ "hw_status=x%x, total_data_specified=%d, "
+ "parameter=x%x, word3=x%x\n",
+ bf_get(lpfc_wcqe_c_status, wcqe),
+ bf_get(lpfc_wcqe_c_hw_status, wcqe),
+ wcqe->total_data_placed, wcqe->parameter,
+ wcqe->word3);
+ }
+
+ /* Look up the FCP command IOCB and create pseudo response IOCB */
+ spin_lock_irqsave(&phba->hbalock, iflags);
+ cmdiocbq = lpfc_sli_iocbq_lookup_by_tag(phba, pring,
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ spin_unlock_irqrestore(&phba->hbalock, iflags);
+ if (unlikely(!cmdiocbq)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0374 FCP complete with no corresponding "
+ "cmdiocb: iotag (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return;
+ }
+ if (unlikely(!cmdiocbq->iocb_cmpl)) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0375 FCP cmdiocb not callback function "
+ "iotag: (%d)\n",
+ bf_get(lpfc_wcqe_c_request_tag, wcqe));
+ return;
+ }
+
+ /* Fake the irspiocb and copy necessary response information */
+ lpfc_sli4_iocb_param_transfer(&irspiocbq, cmdiocbq, wcqe);
+
+ /* Pass the cmd_iocb and the rsp state to the upper layer */
+ (cmdiocbq->iocb_cmpl)(phba, cmdiocbq, &irspiocbq);
+}
+
+/**
+ * lpfc_sli4_fp_handle_rel_wcqe - Handle fast-path WQ entry consumed event
+ * @phba: Pointer to HBA context object.
+ * @cq: Pointer to completion queue.
+ * @wcqe: Pointer to work-queue completion queue entry.
+ *
+ * This routine handles an fast-path WQ entry comsumed event by invoking the
+ * proper WQ release routine to the slow-path WQ.
+ **/
+static void
+lpfc_sli4_fp_handle_rel_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_wcqe_release *wcqe)
+{
+ struct lpfc_queue *childwq;
+ bool wqid_matched = false;
+ uint16_t fcp_wqid;
+
+ /* Check for fast-path FCP work queue release */
+ fcp_wqid = bf_get(lpfc_wcqe_r_wq_id, wcqe);
+ list_for_each_entry(childwq, &cq->child_list, list) {
+ if (childwq->queue_id == fcp_wqid) {
+ lpfc_sli4_wq_release(childwq,
+ bf_get(lpfc_wcqe_r_wqe_index, wcqe));
+ wqid_matched = true;
+ break;
+ }
+ }
+ /* Report warning log message if no match found */
+ if (wqid_matched != true)
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2580 Fast-path wqe consume event carries "
+ "miss-matched qid: wcqe-qid=x%x\n", fcp_wqid);
+}
+
+/**
+ * lpfc_sli4_fp_handle_wcqe - Process fast-path work queue completion entry
+ * @cq: Pointer to the completion queue.
+ * @eqe: Pointer to fast-path completion queue entry.
+ *
+ * This routine process a fast-path work queue completion entry from fast-path
+ * event queue for FCP command response completion.
+ **/
+static int
+lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_cqe *cqe)
+{
+ struct lpfc_wcqe_release wcqe;
+ bool workposted = false;
+
+ /* Copy the work queue CQE and convert endian order if needed */
+ lpfc_sli_pcimem_bcopy(cqe, &wcqe, sizeof(struct lpfc_cqe));
+
+ /* Check and process for different type of WCQE and dispatch */
+ switch (bf_get(lpfc_wcqe_c_code, &wcqe)) {
+ case CQE_CODE_COMPL_WQE:
+ /* Process the WQ complete event */
+ lpfc_sli4_fp_handle_fcp_wcqe(phba,
+ (struct lpfc_wcqe_complete *)&wcqe);
+ break;
+ case CQE_CODE_RELEASE_WQE:
+ /* Process the WQ release event */
+ lpfc_sli4_fp_handle_rel_wcqe(phba, cq,
+ (struct lpfc_wcqe_release *)&wcqe);
+ break;
+ case CQE_CODE_XRI_ABORTED:
+ /* Process the WQ XRI abort event */
+ workposted = lpfc_sli4_sp_handle_abort_xri_wcqe(phba, cq,
+ (struct sli4_wcqe_xri_aborted *)&wcqe);
+ break;
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0144 Not a valid WCQE code: x%x\n",
+ bf_get(lpfc_wcqe_c_code, &wcqe));
+ break;
+ }
+ return workposted;
+}
+
+/**
+ * lpfc_sli4_fp_handle_eqe - Process a fast-path event queue entry
+ * @phba: Pointer to HBA context object.
+ * @eqe: Pointer to fast-path event queue entry.
+ *
+ * This routine process a event queue entry from the fast-path event queue.
+ * It will check the MajorCode and MinorCode to determine this is for a
+ * completion event on a completion queue, if not, an error shall be logged
+ * and just return. Otherwise, it will get to the corresponding completion
+ * queue and process all the entries on the completion queue, rearm the
+ * completion queue, and then return.
+ **/
+static void
+lpfc_sli4_fp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe,
+ uint32_t fcp_cqidx)
+{
+ struct lpfc_queue *cq;
+ struct lpfc_cqe *cqe;
+ bool workposted = false;
+ uint16_t cqid;
+ int ecount = 0;
+
+ if (unlikely(bf_get(lpfc_eqe_major_code, eqe) != 0) ||
+ unlikely(bf_get(lpfc_eqe_minor_code, eqe) != 0)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0366 Not a valid fast-path completion "
+ "event: majorcode=x%x, minorcode=x%x\n",
+ bf_get(lpfc_eqe_major_code, eqe),
+ bf_get(lpfc_eqe_minor_code, eqe));
+ return;
+ }
+
+ cq = phba->sli4_hba.fcp_cq[fcp_cqidx];
+ if (unlikely(!cq)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0367 Fast-path completion queue does not "
+ "exist\n");
+ return;
+ }
+
+ /* Get the reference to the corresponding CQ */
+ cqid = bf_get(lpfc_eqe_resource_id, eqe);
+ if (unlikely(cqid != cq->queue_id)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0368 Miss-matched fast-path completion "
+ "queue identifier: eqcqid=%d, fcpcqid=%d\n",
+ cqid, cq->queue_id);
+ return;
+ }
+
+ /* Process all the entries to the CQ */
+ while ((cqe = lpfc_sli4_cq_get(cq))) {
+ workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, cqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM);
+ }
+
+ /* Catch the no cq entry condition */
+ if (unlikely(ecount == 0))
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0369 No entry from fast-path completion "
+ "queue fcpcqid=%d\n", cq->queue_id);
+
+ /* In any case, flash and re-arm the CQ */
+ lpfc_sli4_cq_release(cq, LPFC_QUEUE_REARM);
+
+ /* wake up worker thread if there are works to be done */
+ if (workposted)
+ lpfc_worker_wake_up(phba);
+}
+
+static void
+lpfc_sli4_eq_flush(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+ struct lpfc_eqe *eqe;
+
+ /* walk all the EQ entries and drop on the floor */
+ while ((eqe = lpfc_sli4_eq_get(eq)))
+ ;
+
+ /* Clear and re-arm the EQ */
+ lpfc_sli4_eq_release(eq, LPFC_QUEUE_REARM);
+}
+
+/**
+ * lpfc_sli4_sp_intr_handler - Slow-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there are slow-path events in
+ * the HBA. However, when the device is enabled with either MSI or Pin-IRQ
+ * interrupt mode, this function is called as part of the device-level
+ * interrupt handler. When the PCI slot is in error recovery or the HBA is
+ * undergoing initialization, the interrupt handler will not process the
+ * interrupt. The link attention and ELS ring attention events are handled
+ * by the worker thread. The interrupt handler signals the worker thread
+ * and returns for these events. This function is called without any lock
+ * held. It gets the hbalock to access and update SLI data structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_sp_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_queue *speq;
+ struct lpfc_eqe *eqe;
+ unsigned long iflag;
+ int ecount = 0;
+
+ /*
+ * Get the driver's phba structure from the dev_id
+ */
+ phba = (struct lpfc_hba *)dev_id;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /* Get to the EQ struct associated with this vector */
+ speq = phba->sli4_hba.sp_eq;
+
+ /* Check device state for handling interrupt */
+ if (unlikely(lpfc_intr_state_check(phba))) {
+ /* Check again for link_state with lock held */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (phba->link_state < LPFC_LINK_DOWN)
+ /* Flush, clear interrupt, and rearm the EQ */
+ lpfc_sli4_eq_flush(phba, speq);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return IRQ_NONE;
+ }
+
+ /*
+ * Process all the event on FCP slow-path EQ
+ */
+ while ((eqe = lpfc_sli4_eq_get(speq))) {
+ lpfc_sli4_sp_handle_eqe(phba, eqe);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_eq_release(speq, LPFC_QUEUE_NOARM);
+ }
+
+ /* Always clear and re-arm the slow-path EQ */
+ lpfc_sli4_eq_release(speq, LPFC_QUEUE_REARM);
+
+ /* Catch the no cq entry condition */
+ if (unlikely(ecount == 0)) {
+ if (phba->intr_type == MSIX)
+ /* MSI-X treated interrupt served as no EQ share INT */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0357 MSI-X interrupt with no EQE\n");
+ else
+ /* Non MSI-X treated on interrupt as EQ share INT */
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+} /* lpfc_sli4_sp_intr_handler */
+
+/**
+ * lpfc_sli4_fp_intr_handler - Fast-path interrupt handler to SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is directly called from the PCI layer as an interrupt
+ * service routine when device with SLI-4 interface spec is enabled with
+ * MSI-X multi-message interrupt mode and there is a fast-path FCP IOCB
+ * ring event in the HBA. However, when the device is enabled with either
+ * MSI or Pin-IRQ interrupt mode, this function is called as part of the
+ * device-level interrupt handler. When the PCI slot is in error recovery
+ * or the HBA is undergoing initialization, the interrupt handler will not
+ * process the interrupt. The SCSI FCP fast-path ring event are handled in
+ * the intrrupt context. This function is called without any lock held.
+ * It gets the hbalock to access and update SLI data structures. Note that,
+ * the FCP EQ to FCP CQ are one-to-one map such that the FCP EQ index is
+ * equal to that of FCP CQ index.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_fp_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ struct lpfc_fcp_eq_hdl *fcp_eq_hdl;
+ struct lpfc_queue *fpeq;
+ struct lpfc_eqe *eqe;
+ unsigned long iflag;
+ int ecount = 0;
+ uint32_t fcp_eqidx;
+
+ /* Get the driver's phba structure from the dev_id */
+ fcp_eq_hdl = (struct lpfc_fcp_eq_hdl *)dev_id;
+ phba = fcp_eq_hdl->phba;
+ fcp_eqidx = fcp_eq_hdl->idx;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /* Get to the EQ struct associated with this vector */
+ fpeq = phba->sli4_hba.fp_eq[fcp_eqidx];
+
+ /* Check device state for handling interrupt */
+ if (unlikely(lpfc_intr_state_check(phba))) {
+ /* Check again for link_state with lock held */
+ spin_lock_irqsave(&phba->hbalock, iflag);
+ if (phba->link_state < LPFC_LINK_DOWN)
+ /* Flush, clear interrupt, and rearm the EQ */
+ lpfc_sli4_eq_flush(phba, fpeq);
+ spin_unlock_irqrestore(&phba->hbalock, iflag);
+ return IRQ_NONE;
+ }
+
+ /*
+ * Process all the event on FCP fast-path EQ
+ */
+ while ((eqe = lpfc_sli4_eq_get(fpeq))) {
+ lpfc_sli4_fp_handle_eqe(phba, eqe, fcp_eqidx);
+ if (!(++ecount % LPFC_GET_QE_REL_INT))
+ lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_NOARM);
+ }
+
+ /* Always clear and re-arm the fast-path EQ */
+ lpfc_sli4_eq_release(fpeq, LPFC_QUEUE_REARM);
+
+ if (unlikely(ecount == 0)) {
+ if (phba->intr_type == MSIX)
+ /* MSI-X treated interrupt served as no EQ share INT */
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "0358 MSI-X interrupt with no EQE\n");
+ else
+ /* Non MSI-X treated on interrupt as EQ share INT */
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+} /* lpfc_sli4_fp_intr_handler */
+
+/**
+ * lpfc_sli4_intr_handler - Device-level interrupt handler for SLI-4 device
+ * @irq: Interrupt number.
+ * @dev_id: The device context pointer.
+ *
+ * This function is the device-level interrupt handler to device with SLI-4
+ * interface spec, called from the PCI layer when either MSI or Pin-IRQ
+ * interrupt mode is enabled and there is an event in the HBA which requires
+ * driver attention. This function invokes the slow-path interrupt attention
+ * handling function and fast-path interrupt attention handling function in
+ * turn to process the relevant HBA attention events. This function is called
+ * without any lock held. It gets the hbalock to access and update SLI data
+ * structures.
+ *
+ * This function returns IRQ_HANDLED when interrupt is handled, else it
+ * returns IRQ_NONE.
+ **/
+irqreturn_t
+lpfc_sli4_intr_handler(int irq, void *dev_id)
+{
+ struct lpfc_hba *phba;
+ irqreturn_t sp_irq_rc, fp_irq_rc;
+ bool fp_handled = false;
+ uint32_t fcp_eqidx;
+
+ /* Get the driver's phba structure from the dev_id */
+ phba = (struct lpfc_hba *)dev_id;
+
+ if (unlikely(!phba))
+ return IRQ_NONE;
+
+ /*
+ * Invokes slow-path host attention interrupt handling as appropriate.
+ */
+ sp_irq_rc = lpfc_sli4_sp_intr_handler(irq, dev_id);
+
+ /*
+ * Invoke fast-path host attention interrupt handling as appropriate.
+ */
+ for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) {
+ fp_irq_rc = lpfc_sli4_fp_intr_handler(irq,
+ &phba->sli4_hba.fcp_eq_hdl[fcp_eqidx]);
+ if (fp_irq_rc == IRQ_HANDLED)
+ fp_handled |= true;
+ }
+
+ return (fp_handled == true) ? IRQ_HANDLED : sp_irq_rc;
+} /* lpfc_sli4_intr_handler */
+
+/**
+ * lpfc_sli4_queue_free - free a queue structure and associated memory
+ * @queue: The queue structure to free.
+ *
+ * This function frees a queue structure and the DMAable memeory used for
+ * the host resident queue. This function must be called after destroying the
+ * queue on the HBA.
+ **/
+void
+lpfc_sli4_queue_free(struct lpfc_queue *queue)
+{
+ struct lpfc_dmabuf *dmabuf;
+
+ if (!queue)
+ return;
+
+ while (!list_empty(&queue->page_list)) {
+ list_remove_head(&queue->page_list, dmabuf, struct lpfc_dmabuf,
+ list);
+ dma_free_coherent(&queue->phba->pcidev->dev, PAGE_SIZE,
+ dmabuf->virt, dmabuf->phys);
+ kfree(dmabuf);
+ }
+ kfree(queue);
+ return;
+}
+
+/**
+ * lpfc_sli4_queue_alloc - Allocate and initialize a queue structure
+ * @phba: The HBA that this queue is being created on.
+ * @entry_size: The size of each queue entry for this queue.
+ * @entry count: The number of entries that this queue will handle.
+ *
+ * This function allocates a queue structure and the DMAable memory used for
+ * the host resident queue. This function must be called before creating the
+ * queue on the HBA.
+ **/
+struct lpfc_queue *
+lpfc_sli4_queue_alloc(struct lpfc_hba *phba, uint32_t entry_size,
+ uint32_t entry_count)
+{
+ struct lpfc_queue *queue;
+ struct lpfc_dmabuf *dmabuf;
+ int x, total_qe_count;
+ void *dma_pointer;
+
+
+ queue = kzalloc(sizeof(struct lpfc_queue) +
+ (sizeof(union sli4_qe) * entry_count), GFP_KERNEL);
+ if (!queue)
+ return NULL;
+ queue->page_count = (PAGE_ALIGN(entry_size * entry_count))/PAGE_SIZE;
+ INIT_LIST_HEAD(&queue->list);
+ INIT_LIST_HEAD(&queue->page_list);
+ INIT_LIST_HEAD(&queue->child_list);
+ for (x = 0, total_qe_count = 0; x < queue->page_count; x++) {
+ dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+ if (!dmabuf)
+ goto out_fail;
+ dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev,
+ PAGE_SIZE, &dmabuf->phys,
+ GFP_KERNEL);
+ if (!dmabuf->virt) {
+ kfree(dmabuf);
+ goto out_fail;
+ }
+ dmabuf->buffer_tag = x;
+ list_add_tail(&dmabuf->list, &queue->page_list);
+ /* initialize queue's entry array */
+ dma_pointer = dmabuf->virt;
+ for (; total_qe_count < entry_count &&
+ dma_pointer < (PAGE_SIZE + dmabuf->virt);
+ total_qe_count++, dma_pointer += entry_size) {
+ queue->qe[total_qe_count].address = dma_pointer;
+ }
+ }
+ queue->entry_size = entry_size;
+ queue->entry_count = entry_count;
+ queue->phba = phba;
+
+ return queue;
+out_fail:
+ lpfc_sli4_queue_free(queue);
+ return NULL;
+}
+
+/**
+ * lpfc_eq_create - Create an Event Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @eq: The queue structure to use to create the event queue.
+ * @imax: The maximum interrupt per second limit.
+ *
+ * This function creates an event queue, as detailed in @eq, on a port,
+ * described by @phba by sending an EQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @eq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the EQ_CREATE mailbox command to the HBA to setup the
+ * event queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_create(struct lpfc_hba *phba, struct lpfc_queue *eq, uint16_t imax)
+{
+ struct lpfc_mbx_eq_create *eq_create;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ struct lpfc_dmabuf *dmabuf;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint16_t dmult;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_eq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_EQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ eq_create = &mbox->u.mqe.un.eq_create;
+ bf_set(lpfc_mbx_eq_create_num_pages, &eq_create->u.request,
+ eq->page_count);
+ bf_set(lpfc_eq_context_size, &eq_create->u.request.context,
+ LPFC_EQE_SIZE);
+ bf_set(lpfc_eq_context_valid, &eq_create->u.request.context, 1);
+ /* Calculate delay multiper from maximum interrupt per second */
+ dmult = LPFC_DMULT_CONST/imax - 1;
+ bf_set(lpfc_eq_context_delay_multi, &eq_create->u.request.context,
+ dmult);
+ switch (eq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0360 Unsupported EQ count. (%d)\n",
+ eq->entry_count);
+ if (eq->entry_count < 256)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 256:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_256);
+ break;
+ case 512:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_512);
+ break;
+ case 1024:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_1024);
+ break;
+ case 2048:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_2048);
+ break;
+ case 4096:
+ bf_set(lpfc_eq_context_count, &eq_create->u.request.context,
+ LPFC_EQ_CNT_4096);
+ break;
+ }
+ list_for_each_entry(dmabuf, &eq->page_list, list) {
+ eq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ eq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ mbox->vport = phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ mbox->context1 = NULL;
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *) &eq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2500 EQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ eq->type = LPFC_EQ;
+ eq->subtype = LPFC_NONE;
+ eq->queue_id = bf_get(lpfc_mbx_eq_create_q_id, &eq_create->u.response);
+ if (eq->queue_id == 0xFFFF)
+ status = -ENXIO;
+ eq->host_index = 0;
+ eq->hba_index = 0;
+
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_cq_create - Create a Completion Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @cq: The queue structure to use to create the completion queue.
+ * @eq: The event queue to bind this completion queue to.
+ *
+ * This function creates a completion queue, as detailed in @wq, on a port,
+ * described by @phba by sending a CQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @eq
+ * is used to indicate which event queue to bind this completion queue to. This
+ * function will send the CQ_CREATE mailbox command to the HBA to setup the
+ * completion queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
+ struct lpfc_queue *eq, uint32_t type, uint32_t subtype)
+{
+ struct lpfc_mbx_cq_create *cq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_cq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_CQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ cq_create = &mbox->u.mqe.un.cq_create;
+ bf_set(lpfc_mbx_cq_create_num_pages, &cq_create->u.request,
+ cq->page_count);
+ bf_set(lpfc_cq_context_event, &cq_create->u.request.context, 1);
+ bf_set(lpfc_cq_context_valid, &cq_create->u.request.context, 1);
+ bf_set(lpfc_cq_eq_id, &cq_create->u.request.context, eq->queue_id);
+ switch (cq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0361 Unsupported CQ count. (%d)\n",
+ cq->entry_count);
+ if (cq->entry_count < 256)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 256:
+ bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+ LPFC_CQ_CNT_256);
+ break;
+ case 512:
+ bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+ LPFC_CQ_CNT_512);
+ break;
+ case 1024:
+ bf_set(lpfc_cq_context_count, &cq_create->u.request.context,
+ LPFC_CQ_CNT_1024);
+ break;
+ }
+ list_for_each_entry(dmabuf, &cq->page_list, list) {
+ cq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ cq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &cq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2501 CQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+ if (cq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ /* link the cq onto the parent eq child list */
+ list_add_tail(&cq->list, &eq->child_list);
+ /* Set up completion queue's type and subtype */
+ cq->type = type;
+ cq->subtype = subtype;
+ cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+ cq->host_index = 0;
+ cq->hba_index = 0;
+out:
+
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_mq_create - Create a mailbox Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @mq: The queue structure to use to create the mailbox queue.
+ *
+ * This function creates a mailbox queue, as detailed in @mq, on a port,
+ * described by @phba by sending a MQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @cq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. This
+ * function will send the MQ_CREATE mailbox command to the HBA to setup the
+ * mailbox queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
+ struct lpfc_queue *cq, uint32_t subtype)
+{
+ struct lpfc_mbx_mq_create *mq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_mq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_MQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ mq_create = &mbox->u.mqe.un.mq_create;
+ bf_set(lpfc_mbx_mq_create_num_pages, &mq_create->u.request,
+ mq->page_count);
+ bf_set(lpfc_mq_context_cq_id, &mq_create->u.request.context,
+ cq->queue_id);
+ bf_set(lpfc_mq_context_valid, &mq_create->u.request.context, 1);
+ switch (mq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0362 Unsupported MQ count. (%d)\n",
+ mq->entry_count);
+ if (mq->entry_count < 16)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 16:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_16);
+ break;
+ case 32:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_32);
+ break;
+ case 64:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_64);
+ break;
+ case 128:
+ bf_set(lpfc_mq_context_count, &mq_create->u.request.context,
+ LPFC_MQ_CNT_128);
+ break;
+ }
+ list_for_each_entry(dmabuf, &mq->page_list, list) {
+ mq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ mq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &mq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2502 MQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ mq->queue_id = bf_get(lpfc_mbx_mq_create_q_id, &mq_create->u.response);
+ if (mq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ mq->type = LPFC_MQ;
+ mq->subtype = subtype;
+ mq->host_index = 0;
+ mq->hba_index = 0;
+
+ /* link the mq onto the parent cq child list */
+ list_add_tail(&mq->list, &cq->child_list);
+out:
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_wq_create - Create a Work Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @wq: The queue structure to use to create the work queue.
+ * @cq: The completion queue to bind this work queue to.
+ * @subtype: The subtype of the work queue indicating its functionality.
+ *
+ * This function creates a work queue, as detailed in @wq, on a port, described
+ * by @phba by sending a WQ_CREATE mailbox command to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @wq struct
+ * is used to get the entry count and entry size that are necessary to
+ * determine the number of pages to allocate and use for this queue. The @cq
+ * is used to indicate which completion queue to bind this work queue to. This
+ * function will send the WQ_CREATE mailbox command to the HBA to setup the
+ * work queue. This function is asynchronous and will wait for the mailbox
+ * command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
+ struct lpfc_queue *cq, uint32_t subtype)
+{
+ struct lpfc_mbx_wq_create *wq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_wq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_WQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ wq_create = &mbox->u.mqe.un.wq_create;
+ bf_set(lpfc_mbx_wq_create_num_pages, &wq_create->u.request,
+ wq->page_count);
+ bf_set(lpfc_mbx_wq_create_cq_id, &wq_create->u.request,
+ cq->queue_id);
+ list_for_each_entry(dmabuf, &wq->page_list, list) {
+ wq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ wq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &wq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2503 WQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ wq->queue_id = bf_get(lpfc_mbx_wq_create_q_id, &wq_create->u.response);
+ if (wq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ wq->type = LPFC_WQ;
+ wq->subtype = subtype;
+ wq->host_index = 0;
+ wq->hba_index = 0;
+
+ /* link the wq onto the parent cq child list */
+ list_add_tail(&wq->list, &cq->child_list);
+out:
+ if (rc == MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_rq_create - Create a Receive Queue on the HBA
+ * @phba: HBA structure that indicates port to create a queue on.
+ * @hrq: The queue structure to use to create the header receive queue.
+ * @drq: The queue structure to use to create the data receive queue.
+ * @cq: The completion queue to bind this work queue to.
+ *
+ * This function creates a receive buffer queue pair , as detailed in @hrq and
+ * @drq, on a port, described by @phba by sending a RQ_CREATE mailbox command
+ * to the HBA.
+ *
+ * The @phba struct is used to send mailbox command to HBA. The @drq and @hrq
+ * struct is used to get the entry count that is necessary to determine the
+ * number of pages to use for this queue. The @cq is used to indicate which
+ * completion queue to bind received buffers that are posted to these queues to.
+ * This function will send the RQ_CREATE mailbox command to the HBA to setup the
+ * receive queue pair. This function is asynchronous and will wait for the
+ * mailbox command to finish before continuing.
+ *
+ * On success this function will return a zero. If unable to allocate enough
+ * memory this function will return ENOMEM. If the queue create mailbox command
+ * fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+ struct lpfc_queue *drq, struct lpfc_queue *cq, uint32_t subtype)
+{
+ struct lpfc_mbx_rq_create *rq_create;
+ struct lpfc_dmabuf *dmabuf;
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (hrq->entry_count != drq->entry_count)
+ return -EINVAL;
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_rq_create) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ rq_create = &mbox->u.mqe.un.rq_create;
+ switch (hrq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2535 Unsupported RQ count. (%d)\n",
+ hrq->entry_count);
+ if (hrq->entry_count < 512)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 512:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_512);
+ break;
+ case 1024:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_1024);
+ break;
+ case 2048:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_2048);
+ break;
+ case 4096:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_4096);
+ break;
+ }
+ bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+ cq->queue_id);
+ bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+ hrq->page_count);
+ bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+ LPFC_HDR_BUF_SIZE);
+ list_for_each_entry(dmabuf, &hrq->page_list, list) {
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2504 RQ_CREATE mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ goto out;
+ }
+ hrq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+ if (hrq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ hrq->type = LPFC_HRQ;
+ hrq->subtype = subtype;
+ hrq->host_index = 0;
+ hrq->hba_index = 0;
+
+ /* now create the data queue */
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_RQ_CREATE,
+ length, LPFC_SLI4_MBX_EMBED);
+ switch (drq->entry_count) {
+ default:
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2536 Unsupported RQ count. (%d)\n",
+ drq->entry_count);
+ if (drq->entry_count < 512)
+ return -EINVAL;
+ /* otherwise default to smallest count (drop through) */
+ case 512:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_512);
+ break;
+ case 1024:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_1024);
+ break;
+ case 2048:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_2048);
+ break;
+ case 4096:
+ bf_set(lpfc_rq_context_rq_size, &rq_create->u.request.context,
+ LPFC_RQ_RING_SIZE_4096);
+ break;
+ }
+ bf_set(lpfc_rq_context_cq_id, &rq_create->u.request.context,
+ cq->queue_id);
+ bf_set(lpfc_mbx_rq_create_num_pages, &rq_create->u.request,
+ drq->page_count);
+ bf_set(lpfc_rq_context_buf_size, &rq_create->u.request.context,
+ LPFC_DATA_BUF_SIZE);
+ list_for_each_entry(dmabuf, &drq->page_list, list) {
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_lo =
+ putPaddrLow(dmabuf->phys);
+ rq_create->u.request.page[dmabuf->buffer_tag].addr_hi =
+ putPaddrHigh(dmabuf->phys);
+ }
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &rq_create->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ status = -ENXIO;
+ goto out;
+ }
+ drq->queue_id = bf_get(lpfc_mbx_rq_create_q_id, &rq_create->u.response);
+ if (drq->queue_id == 0xFFFF) {
+ status = -ENXIO;
+ goto out;
+ }
+ drq->type = LPFC_DRQ;
+ drq->subtype = subtype;
+ drq->host_index = 0;
+ drq->hba_index = 0;
+
+ /* link the header and data RQs onto the parent cq child list */
+ list_add_tail(&hrq->list, &cq->child_list);
+ list_add_tail(&drq->list, &cq->child_list);
+
+out:
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_eq_destroy - Destroy an event Queue on the HBA
+ * @eq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @eq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @eq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_eq_destroy(struct lpfc_hba *phba, struct lpfc_queue *eq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!eq)
+ return -ENODEV;
+ mbox = mempool_alloc(eq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_eq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_EQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_eq_destroy_q_id, &mbox->u.mqe.un.eq_destroy.u.request,
+ eq->queue_id);
+ mbox->vport = eq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+
+ rc = lpfc_sli_issue_mbox(eq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.eq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2505 EQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+
+ /* Remove eq from any list */
+ list_del_init(&eq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, eq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_cq_destroy - Destroy a Completion Queue on the HBA
+ * @cq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @cq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @cq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_cq_destroy(struct lpfc_hba *phba, struct lpfc_queue *cq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!cq)
+ return -ENODEV;
+ mbox = mempool_alloc(cq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_cq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_CQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_cq_destroy_q_id, &mbox->u.mqe.un.cq_destroy.u.request,
+ cq->queue_id);
+ mbox->vport = cq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(cq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.wq_create.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2506 CQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ /* Remove cq from any list */
+ list_del_init(&cq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, cq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_mq_destroy - Destroy a Mailbox Queue on the HBA
+ * @qm: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @mq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @mq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_mq_destroy(struct lpfc_hba *phba, struct lpfc_queue *mq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!mq)
+ return -ENODEV;
+ mbox = mempool_alloc(mq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_mq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_MQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_mq_destroy_q_id, &mbox->u.mqe.un.mq_destroy.u.request,
+ mq->queue_id);
+ mbox->vport = mq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(mq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.mq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2507 MQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ /* Remove mq from any list */
+ list_del_init(&mq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, mq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_wq_destroy - Destroy a Work Queue on the HBA
+ * @wq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @wq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @wq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_wq_destroy(struct lpfc_hba *phba, struct lpfc_queue *wq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!wq)
+ return -ENODEV;
+ mbox = mempool_alloc(wq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_wq_destroy) -
+ sizeof(struct lpfc_sli4_cfg_mhdr));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_WQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_wq_destroy_q_id, &mbox->u.mqe.un.wq_destroy.u.request,
+ wq->queue_id);
+ mbox->vport = wq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(wq->phba, mbox, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.wq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2508 WQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ /* Remove wq from any list */
+ list_del_init(&wq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, wq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_rq_destroy - Destroy a Receive Queue on the HBA
+ * @rq: The queue structure associated with the queue to destroy.
+ *
+ * This function destroys a queue, as detailed in @rq by sending an mailbox
+ * command, specific to the type of queue, to the HBA.
+ *
+ * The @rq struct is used to get the queue ID of the queue to destroy.
+ *
+ * On success this function will return a zero. If the queue destroy mailbox
+ * command fails this function will return ENXIO.
+ **/
+uint32_t
+lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
+ struct lpfc_queue *drq)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc, length, status = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (!hrq || !drq)
+ return -ENODEV;
+ mbox = mempool_alloc(hrq->phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+ length = (sizeof(struct lpfc_mbx_rq_destroy) -
+ sizeof(struct mbox_header));
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
+ length, LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+ hrq->queue_id);
+ mbox->vport = hrq->phba->pport;
+ mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+ rc = lpfc_sli_issue_mbox(hrq->phba, mbox, MBX_POLL);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2509 RQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, hrq->phba->mbox_mem_pool);
+ return -ENXIO;
+ }
+ bf_set(lpfc_mbx_rq_destroy_q_id, &mbox->u.mqe.un.rq_destroy.u.request,
+ drq->queue_id);
+ rc = lpfc_sli_issue_mbox(drq->phba, mbox, MBX_POLL);
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.rq_destroy.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2510 RQ_DESTROY mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ status = -ENXIO;
+ }
+ list_del_init(&hrq->list);
+ list_del_init(&drq->list);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, hrq->phba->mbox_mem_pool);
+ return status;
+}
+
+/**
+ * lpfc_sli4_post_sgl - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ * @pdma_phys_addr0: Physical address of the 1st SGL page.
+ * @pdma_phys_addr1: Physical address of the 2nd SGL page.
+ * @xritag: the xritag that ties this io to the SGL pages.
+ *
+ * This routine will post the sgl pages for the IO that has the xritag
+ * that is in the iocbq structure. The xritag is assigned during iocbq
+ * creation and persists for as long as the driver is loaded.
+ * if the caller has fewer than 256 scatter gather segments to map then
+ * pdma_phys_addr1 should be 0.
+ * If the caller needs to map more than 256 scatter gather segment then
+ * pdma_phys_addr1 should be a valid physical address.
+ * physical address for SGLs must be 64 byte aligned.
+ * If you are going to map 2 SGL's then the first one must have 256 entries
+ * the second sgl can have between 1 and 256 entries.
+ *
+ * Return codes:
+ * 0 - Success
+ * -ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_post_sgl(struct lpfc_hba *phba,
+ dma_addr_t pdma_phys_addr0,
+ dma_addr_t pdma_phys_addr1,
+ uint16_t xritag)
+{
+ struct lpfc_mbx_post_sgl_pages *post_sgl_pages;
+ LPFC_MBOXQ_t *mbox;
+ int rc;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ if (xritag == NO_XRI) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "0364 Invalid param:\n");
+ return -EINVAL;
+ }
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
+ sizeof(struct lpfc_mbx_post_sgl_pages) -
+ sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+
+ post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
+ &mbox->u.mqe.un.post_sgl_pages;
+ bf_set(lpfc_post_sgl_pages_xri, post_sgl_pages, xritag);
+ bf_set(lpfc_post_sgl_pages_xricnt, post_sgl_pages, 1);
+
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_addr0));
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_addr0));
+
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_addr1));
+ post_sgl_pages->sgl_pg_pairs[0].sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_addr1));
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2511 POST_SGL mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return 0;
+}
+/**
+ * lpfc_sli4_remove_all_sgl_pages - Post scatter gather list for an XRI to HBA
+ * @phba: The virtual port for which this call being executed.
+ *
+ * This routine will remove all of the sgl pages registered with the hba.
+ *
+ * Return codes:
+ * 0 - Success
+ * -ENXIO, -ENOMEM - Failure
+ **/
+int
+lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mbox;
+ int rc;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox)
+ return -ENOMEM;
+
+ lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_REMOVE_SGL_PAGES, 0,
+ LPFC_SLI4_MBX_EMBED);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *)
+ &mbox->u.mqe.un.sli4_config.header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2512 REMOVE_ALL_SGL_PAGES mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_next_xritag - Get an xritag for the io
+ * @phba: Pointer to HBA context object.
+ *
+ * This function gets an xritag for the iocb. If there is no unused xritag
+ * it will return 0xffff.
+ * The function returns the allocated xritag if successful, else returns zero.
+ * Zero is not a valid xritag.
+ * The caller is not required to hold any lock.
+ **/
+uint16_t
+lpfc_sli4_next_xritag(struct lpfc_hba *phba)
+{
+ uint16_t xritag;
+
+ spin_lock_irq(&phba->hbalock);
+ xritag = phba->sli4_hba.next_xri;
+ if ((xritag != (uint16_t) -1) && xritag <
+ (phba->sli4_hba.max_cfg_param.max_xri
+ + phba->sli4_hba.max_cfg_param.xri_base)) {
+ phba->sli4_hba.next_xri++;
+ phba->sli4_hba.max_cfg_param.xri_used++;
+ spin_unlock_irq(&phba->hbalock);
+ return xritag;
+ }
+ spin_unlock_irq(&phba->hbalock);
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2004 Failed to allocate XRI.last XRITAG is %d"
+ " Max XRI is %d, Used XRI is %d\n",
+ phba->sli4_hba.next_xri,
+ phba->sli4_hba.max_cfg_param.max_xri,
+ phba->sli4_hba.max_cfg_param.xri_used);
+ return -1;
+}
+
+/**
+ * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post a block of driver's sgl pages to the
+ * HBA using non-embedded mailbox command. No Lock is held. This routine
+ * is only called when the driver is loading and after all IO has been
+ * stopped.
+ **/
+int
+lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
+{
+ struct lpfc_sglq *sglq_entry;
+ struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+ struct sgl_page_pairs *sgl_pg_pairs;
+ void *viraddr;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t reqlen, alloclen, pg_pairs;
+ uint32_t mbox_tmo;
+ uint16_t xritag_start = 0;
+ int els_xri_cnt, rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* The number of sgls to be posted */
+ els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba);
+
+ reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ if (reqlen > PAGE_SIZE) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "2559 Block sgl registration required DMA "
+ "size (%d) great than a page\n", reqlen);
+ return -ENOMEM;
+ }
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2560 Failed to allocate mbox cmd memory\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate DMA memory and set up the non-embedded mailbox command */
+ alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0285 Allocated DMA memory size (%d) is "
+ "less than the requested DMA memory "
+ "size (%d)\n", alloclen, reqlen);
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory */
+ if (unlikely(!mbox->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2525 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+ viraddr = mbox->sge_array->addr[0];
+
+ /* Set up the SGL pages in the non-embedded DMA pages */
+ sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+ sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+ for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) {
+ sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs];
+ /* Set up the sge entry */
+ sgl_pg_pairs->sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(sglq_entry->phys));
+ sgl_pg_pairs->sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(sglq_entry->phys));
+ sgl_pg_pairs->sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(0));
+ sgl_pg_pairs->sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(0));
+ /* Keep the first xritag on the list */
+ if (pg_pairs == 0)
+ xritag_start = sglq_entry->sli4_xritag;
+ sgl_pg_pairs++;
+ }
+ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+ pg_pairs = (pg_pairs > 0) ? (pg_pairs - 1) : pg_pairs;
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+ /* Perform endian conversion if necessary */
+ sgl->word0 = cpu_to_le32(sgl->word0);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2513 POST_SGL_BLOCK mailbox command failed "
+ "status x%x add_status x%x mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_post_scsi_sgl_block - post a block of scsi sgl list to firmware
+ * @phba: pointer to lpfc hba data structure.
+ * @sblist: pointer to scsi buffer list.
+ * @count: number of scsi buffers on the list.
+ *
+ * This routine is invoked to post a block of @count scsi sgl pages from a
+ * SCSI buffer list @sblist to the HBA using non-embedded mailbox command.
+ * No Lock is held.
+ *
+ **/
+int
+lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
+ int cnt)
+{
+ struct lpfc_scsi_buf *psb;
+ struct lpfc_mbx_post_uembed_sgl_page1 *sgl;
+ struct sgl_page_pairs *sgl_pg_pairs;
+ void *viraddr;
+ LPFC_MBOXQ_t *mbox;
+ uint32_t reqlen, alloclen, pg_pairs;
+ uint32_t mbox_tmo;
+ uint16_t xritag_start = 0;
+ int rc = 0;
+ uint32_t shdr_status, shdr_add_status;
+ dma_addr_t pdma_phys_bpl1;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* Calculate the requested length of the dma memory */
+ reqlen = cnt * sizeof(struct sgl_page_pairs) +
+ sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t);
+ if (reqlen > PAGE_SIZE) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
+ "0217 Block sgl registration required DMA "
+ "size (%d) great than a page\n", reqlen);
+ return -ENOMEM;
+ }
+ mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mbox) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0283 Failed to allocate mbox cmd memory\n");
+ return -ENOMEM;
+ }
+
+ /* Allocate DMA memory and set up the non-embedded mailbox command */
+ alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2561 Allocated DMA memory size (%d) is "
+ "less than the requested DMA memory "
+ "size (%d)\n", alloclen, reqlen);
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory */
+ if (unlikely(!mbox->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2565 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ return -ENOMEM;
+ }
+ viraddr = mbox->sge_array->addr[0];
+
+ /* Set up the SGL pages in the non-embedded DMA pages */
+ sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr;
+ sgl_pg_pairs = &sgl->sgl_pg_pairs;
+
+ pg_pairs = 0;
+ list_for_each_entry(psb, sblist, list) {
+ /* Set up the sge entry */
+ sgl_pg_pairs->sgl_pg0_addr_lo =
+ cpu_to_le32(putPaddrLow(psb->dma_phys_bpl));
+ sgl_pg_pairs->sgl_pg0_addr_hi =
+ cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl));
+ if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE)
+ pdma_phys_bpl1 = psb->dma_phys_bpl + SGL_PAGE_SIZE;
+ else
+ pdma_phys_bpl1 = 0;
+ sgl_pg_pairs->sgl_pg1_addr_lo =
+ cpu_to_le32(putPaddrLow(pdma_phys_bpl1));
+ sgl_pg_pairs->sgl_pg1_addr_hi =
+ cpu_to_le32(putPaddrHigh(pdma_phys_bpl1));
+ /* Keep the first xritag on the list */
+ if (pg_pairs == 0)
+ xritag_start = psb->cur_iocbq.sli4_xritag;
+ sgl_pg_pairs++;
+ pg_pairs++;
+ }
+ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
+ bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+ /* Perform endian conversion if necessary */
+ sgl->word0 = cpu_to_le32(sgl->word0);
+
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+ else {
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo);
+ }
+ shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ lpfc_sli4_mbox_cmd_free(phba, mbox);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2564 POST_SGL_BLOCK mailbox command failed "
+ "status x%x add_status x%x mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_fc_frame_check - Check that this frame is a valid frame to handle
+ * @phba: pointer to lpfc_hba struct that the frame was received on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function checks the fields in the @fc_hdr to see if the FC frame is a
+ * valid type of frame that the LPFC driver will handle. This function will
+ * return a zero if the frame is a valid frame or a non zero value when the
+ * frame does not pass the check.
+ **/
+static int
+lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
+{
+ char *rctl_names[] = FC_RCTL_NAMES_INIT;
+ char *type_names[] = FC_TYPE_NAMES_INIT;
+ struct fc_vft_header *fc_vft_hdr;
+
+ switch (fc_hdr->fh_r_ctl) {
+ case FC_RCTL_DD_UNCAT: /* uncategorized information */
+ case FC_RCTL_DD_SOL_DATA: /* solicited data */
+ case FC_RCTL_DD_UNSOL_CTL: /* unsolicited control */
+ case FC_RCTL_DD_SOL_CTL: /* solicited control or reply */
+ case FC_RCTL_DD_UNSOL_DATA: /* unsolicited data */
+ case FC_RCTL_DD_DATA_DESC: /* data descriptor */
+ case FC_RCTL_DD_UNSOL_CMD: /* unsolicited command */
+ case FC_RCTL_DD_CMD_STATUS: /* command status */
+ case FC_RCTL_ELS_REQ: /* extended link services request */
+ case FC_RCTL_ELS_REP: /* extended link services reply */
+ case FC_RCTL_ELS4_REQ: /* FC-4 ELS request */
+ case FC_RCTL_ELS4_REP: /* FC-4 ELS reply */
+ case FC_RCTL_BA_NOP: /* basic link service NOP */
+ case FC_RCTL_BA_ABTS: /* basic link service abort */
+ case FC_RCTL_BA_RMC: /* remove connection */
+ case FC_RCTL_BA_ACC: /* basic accept */
+ case FC_RCTL_BA_RJT: /* basic reject */
+ case FC_RCTL_BA_PRMT:
+ case FC_RCTL_ACK_1: /* acknowledge_1 */
+ case FC_RCTL_ACK_0: /* acknowledge_0 */
+ case FC_RCTL_P_RJT: /* port reject */
+ case FC_RCTL_F_RJT: /* fabric reject */
+ case FC_RCTL_P_BSY: /* port busy */
+ case FC_RCTL_F_BSY: /* fabric busy to data frame */
+ case FC_RCTL_F_BSYL: /* fabric busy to link control frame */
+ case FC_RCTL_LCR: /* link credit reset */
+ case FC_RCTL_END: /* end */
+ break;
+ case FC_RCTL_VFTH: /* Virtual Fabric tagging Header */
+ fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+ fc_hdr = &((struct fc_frame_header *)fc_vft_hdr)[1];
+ return lpfc_fc_frame_check(phba, fc_hdr);
+ default:
+ goto drop;
+ }
+ switch (fc_hdr->fh_type) {
+ case FC_TYPE_BLS:
+ case FC_TYPE_ELS:
+ case FC_TYPE_FCP:
+ case FC_TYPE_CT:
+ break;
+ case FC_TYPE_IP:
+ case FC_TYPE_ILS:
+ default:
+ goto drop;
+ }
+ lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+ "2538 Received frame rctl:%s type:%s\n",
+ rctl_names[fc_hdr->fh_r_ctl],
+ type_names[fc_hdr->fh_type]);
+ return 0;
+drop:
+ lpfc_printf_log(phba, KERN_WARNING, LOG_ELS,
+ "2539 Dropped frame rctl:%s type:%s\n",
+ rctl_names[fc_hdr->fh_r_ctl],
+ type_names[fc_hdr->fh_type]);
+ return 1;
+}
+
+/**
+ * lpfc_fc_hdr_get_vfi - Get the VFI from an FC frame
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ *
+ * This function processes the FC header to retrieve the VFI from the VF
+ * header, if one exists. This function will return the VFI if one exists
+ * or 0 if no VSAN Header exists.
+ **/
+static uint32_t
+lpfc_fc_hdr_get_vfi(struct fc_frame_header *fc_hdr)
+{
+ struct fc_vft_header *fc_vft_hdr = (struct fc_vft_header *)fc_hdr;
+
+ if (fc_hdr->fh_r_ctl != FC_RCTL_VFTH)
+ return 0;
+ return bf_get(fc_vft_hdr_vf_id, fc_vft_hdr);
+}
+
+/**
+ * lpfc_fc_frame_to_vport - Finds the vport that a frame is destined to
+ * @phba: Pointer to the HBA structure to search for the vport on
+ * @fc_hdr: A pointer to the FC Header data (In Big Endian Format)
+ * @fcfi: The FC Fabric ID that the frame came from
+ *
+ * This function searches the @phba for a vport that matches the content of the
+ * @fc_hdr passed in and the @fcfi. This function uses the @fc_hdr to fetch the
+ * VFI, if the Virtual Fabric Tagging Header exists, and the DID. This function
+ * returns the matching vport pointer or NULL if unable to match frame to a
+ * vport.
+ **/
+static struct lpfc_vport *
+lpfc_fc_frame_to_vport(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr,
+ uint16_t fcfi)
+{
+ struct lpfc_vport **vports;
+ struct lpfc_vport *vport = NULL;
+ int i;
+ uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
+ fc_hdr->fh_d_id[1] << 8 |
+ fc_hdr->fh_d_id[2]);
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL)
+ for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
+ if (phba->fcf.fcfi == fcfi &&
+ vports[i]->vfi == lpfc_fc_hdr_get_vfi(fc_hdr) &&
+ vports[i]->fc_myDID == did) {
+ vport = vports[i];
+ break;
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+ return vport;
+}
+
+/**
+ * lpfc_fc_frame_add - Adds a frame to the vport's list of received sequences
+ * @dmabuf: pointer to a dmabuf that describes the hdr and data of the FC frame
+ *
+ * This function searches through the existing incomplete sequences that have
+ * been sent to this @vport. If the frame matches one of the incomplete
+ * sequences then the dbuf in the @dmabuf is added to the list of frames that
+ * make up that sequence. If no sequence is found that matches this frame then
+ * the function will add the hbuf in the @dmabuf to the @vport's rcv_buffer_list
+ * This function returns a pointer to the first dmabuf in the sequence list that
+ * the frame was linked to.
+ **/
+static struct hbq_dmabuf *
+lpfc_fc_frame_add(struct lpfc_vport *vport, struct hbq_dmabuf *dmabuf)
+{
+ struct fc_frame_header *new_hdr;
+ struct fc_frame_header *temp_hdr;
+ struct lpfc_dmabuf *d_buf;
+ struct lpfc_dmabuf *h_buf;
+ struct hbq_dmabuf *seq_dmabuf = NULL;
+ struct hbq_dmabuf *temp_dmabuf = NULL;
+
+ new_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ /* Use the hdr_buf to find the sequence that this frame belongs to */
+ list_for_each_entry(h_buf, &vport->rcv_buffer_list, list) {
+ temp_hdr = (struct fc_frame_header *)h_buf->virt;
+ if ((temp_hdr->fh_seq_id != new_hdr->fh_seq_id) ||
+ (temp_hdr->fh_ox_id != new_hdr->fh_ox_id) ||
+ (memcmp(&temp_hdr->fh_s_id, &new_hdr->fh_s_id, 3)))
+ continue;
+ /* found a pending sequence that matches this frame */
+ seq_dmabuf = container_of(h_buf, struct hbq_dmabuf, hbuf);
+ break;
+ }
+ if (!seq_dmabuf) {
+ /*
+ * This indicates first frame received for this sequence.
+ * Queue the buffer on the vport's rcv_buffer_list.
+ */
+ list_add_tail(&dmabuf->hbuf.list, &vport->rcv_buffer_list);
+ return dmabuf;
+ }
+ temp_hdr = seq_dmabuf->hbuf.virt;
+ if (new_hdr->fh_seq_cnt < temp_hdr->fh_seq_cnt) {
+ list_add(&seq_dmabuf->dbuf.list, &dmabuf->dbuf.list);
+ return dmabuf;
+ }
+ /* find the correct place in the sequence to insert this frame */
+ list_for_each_entry_reverse(d_buf, &seq_dmabuf->dbuf.list, list) {
+ temp_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+ temp_hdr = (struct fc_frame_header *)temp_dmabuf->hbuf.virt;
+ /*
+ * If the frame's sequence count is greater than the frame on
+ * the list then insert the frame right after this frame
+ */
+ if (new_hdr->fh_seq_cnt > temp_hdr->fh_seq_cnt) {
+ list_add(&dmabuf->dbuf.list, &temp_dmabuf->dbuf.list);
+ return seq_dmabuf;
+ }
+ }
+ return NULL;
+}
+
+/**
+ * lpfc_seq_complete - Indicates if a sequence is complete
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function checks the sequence, starting with the frame described by
+ * @dmabuf, to see if all the frames associated with this sequence are present.
+ * the frames associated with this sequence are linked to the @dmabuf using the
+ * dbuf list. This function looks for two major things. 1) That the first frame
+ * has a sequence count of zero. 2) There is a frame with last frame of sequence
+ * set. 3) That there are no holes in the sequence count. The function will
+ * return 1 when the sequence is complete, otherwise it will return 0.
+ **/
+static int
+lpfc_seq_complete(struct hbq_dmabuf *dmabuf)
+{
+ struct fc_frame_header *hdr;
+ struct lpfc_dmabuf *d_buf;
+ struct hbq_dmabuf *seq_dmabuf;
+ uint32_t fctl;
+ int seq_count = 0;
+
+ hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ /* make sure first fame of sequence has a sequence count of zero */
+ if (hdr->fh_seq_cnt != seq_count)
+ return 0;
+ fctl = (hdr->fh_f_ctl[0] << 16 |
+ hdr->fh_f_ctl[1] << 8 |
+ hdr->fh_f_ctl[2]);
+ /* If last frame of sequence we can return success. */
+ if (fctl & FC_FC_END_SEQ)
+ return 1;
+ list_for_each_entry(d_buf, &dmabuf->dbuf.list, list) {
+ seq_dmabuf = container_of(d_buf, struct hbq_dmabuf, dbuf);
+ hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+ /* If there is a hole in the sequence count then fail. */
+ if (++seq_count != hdr->fh_seq_cnt)
+ return 0;
+ fctl = (hdr->fh_f_ctl[0] << 16 |
+ hdr->fh_f_ctl[1] << 8 |
+ hdr->fh_f_ctl[2]);
+ /* If last frame of sequence we can return success. */
+ if (fctl & FC_FC_END_SEQ)
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_prep_seq - Prep sequence for ULP processing
+ * @vport: Pointer to the vport on which this sequence was received
+ * @dmabuf: pointer to a dmabuf that describes the FC sequence
+ *
+ * This function takes a sequence, described by a list of frames, and creates
+ * a list of iocbq structures to describe the sequence. This iocbq list will be
+ * used to issue to the generic unsolicited sequence handler. This routine
+ * returns a pointer to the first iocbq in the list. If the function is unable
+ * to allocate an iocbq then it throw out the received frames that were not
+ * able to be described and return a pointer to the first iocbq. If unable to
+ * allocate any iocbqs (including the first) this function will return NULL.
+ **/
+static struct lpfc_iocbq *
+lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf)
+{
+ struct lpfc_dmabuf *d_buf, *n_buf;
+ struct lpfc_iocbq *first_iocbq, *iocbq;
+ struct fc_frame_header *fc_hdr;
+ uint32_t sid;
+
+ fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+ /* remove from receive buffer list */
+ list_del_init(&seq_dmabuf->hbuf.list);
+ /* get the Remote Port's SID */
+ sid = (fc_hdr->fh_s_id[0] << 16 |
+ fc_hdr->fh_s_id[1] << 8 |
+ fc_hdr->fh_s_id[2]);
+ /* Get an iocbq struct to fill in. */
+ first_iocbq = lpfc_sli_get_iocbq(vport->phba);
+ if (first_iocbq) {
+ /* Initialize the first IOCB. */
+ first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
+ first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
+ first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id);
+ first_iocbq->iocb.unsli3.rcvsli3.vpi =
+ vport->vpi + vport->phba->vpi_base;
+ /* put the first buffer into the first IOCBq */
+ first_iocbq->context2 = &seq_dmabuf->dbuf;
+ first_iocbq->context3 = NULL;
+ first_iocbq->iocb.ulpBdeCount = 1;
+ first_iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+ LPFC_DATA_BUF_SIZE;
+ first_iocbq->iocb.un.rcvels.remoteID = sid;
+ }
+ iocbq = first_iocbq;
+ /*
+ * Each IOCBq can have two Buffers assigned, so go through the list
+ * of buffers for this sequence and save two buffers in each IOCBq
+ */
+ list_for_each_entry_safe(d_buf, n_buf, &seq_dmabuf->dbuf.list, list) {
+ if (!iocbq) {
+ lpfc_in_buf_free(vport->phba, d_buf);
+ continue;
+ }
+ if (!iocbq->context3) {
+ iocbq->context3 = d_buf;
+ iocbq->iocb.ulpBdeCount++;
+ iocbq->iocb.unsli3.rcvsli3.bde2.tus.f.bdeSize =
+ LPFC_DATA_BUF_SIZE;
+ } else {
+ iocbq = lpfc_sli_get_iocbq(vport->phba);
+ if (!iocbq) {
+ if (first_iocbq) {
+ first_iocbq->iocb.ulpStatus =
+ IOSTAT_FCP_RSP_ERROR;
+ first_iocbq->iocb.un.ulpWord[4] =
+ IOERR_NO_RESOURCES;
+ }
+ lpfc_in_buf_free(vport->phba, d_buf);
+ continue;
+ }
+ iocbq->context2 = d_buf;
+ iocbq->context3 = NULL;
+ iocbq->iocb.ulpBdeCount = 1;
+ iocbq->iocb.un.cont64[0].tus.f.bdeSize =
+ LPFC_DATA_BUF_SIZE;
+ iocbq->iocb.un.rcvels.remoteID = sid;
+ list_add_tail(&iocbq->list, &first_iocbq->list);
+ }
+ }
+ return first_iocbq;
+}
+
+/**
+ * lpfc_sli4_handle_received_buffer - Handle received buffers from firmware
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with no lock held. This function processes all
+ * the received buffers and gives it to upper layers when a received buffer
+ * indicates that it is the final frame in the sequence. The interrupt
+ * service routine processes received buffers at interrupt contexts and adds
+ * received dma buffers to the rb_pend_list queue and signals the worker thread.
+ * Worker thread calls lpfc_sli4_handle_received_buffer, which will call the
+ * appropriate receive function when the final frame in a sequence is received.
+ **/
+int
+lpfc_sli4_handle_received_buffer(struct lpfc_hba *phba)
+{
+ LIST_HEAD(cmplq);
+ struct hbq_dmabuf *dmabuf, *seq_dmabuf;
+ struct fc_frame_header *fc_hdr;
+ struct lpfc_vport *vport;
+ uint32_t fcfi;
+ struct lpfc_iocbq *iocbq;
+
+ /* Clear hba flag and get all received buffers into the cmplq */
+ spin_lock_irq(&phba->hbalock);
+ phba->hba_flag &= ~HBA_RECEIVE_BUFFER;
+ list_splice_init(&phba->rb_pend_list, &cmplq);
+ spin_unlock_irq(&phba->hbalock);
+
+ /* Process each received buffer */
+ while ((dmabuf = lpfc_sli_hbqbuf_get(&cmplq)) != NULL) {
+ fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
+ /* check to see if this a valid type of frame */
+ if (lpfc_fc_frame_check(phba, fc_hdr)) {
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ continue;
+ }
+ fcfi = bf_get(lpfc_rcqe_fcf_id, &dmabuf->rcqe);
+ vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
+ if (!vport) {
+ /* throw out the frame */
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ continue;
+ }
+ /* Link this frame */
+ seq_dmabuf = lpfc_fc_frame_add(vport, dmabuf);
+ if (!seq_dmabuf) {
+ /* unable to add frame to vport - throw it out */
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ continue;
+ }
+ /* If not last frame in sequence continue processing frames. */
+ if (!lpfc_seq_complete(seq_dmabuf)) {
+ /*
+ * When saving off frames post a new one and mark this
+ * frame to be freed when it is finished.
+ **/
+ lpfc_sli_hbqbuf_fill_hbqs(phba, LPFC_ELS_HBQ, 1);
+ dmabuf->tag = -1;
+ continue;
+ }
+ fc_hdr = (struct fc_frame_header *)seq_dmabuf->hbuf.virt;
+ iocbq = lpfc_prep_seq(vport, seq_dmabuf);
+ if (!lpfc_complete_unsol_iocb(phba,
+ &phba->sli.ring[LPFC_ELS_RING],
+ iocbq, fc_hdr->fh_r_ctl,
+ fc_hdr->fh_type))
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2540 Ring %d handler: unexpected Rctl "
+ "x%x Type x%x received\n",
+ LPFC_ELS_RING,
+ fc_hdr->fh_r_ctl, fc_hdr->fh_type);
+ };
+ return 0;
+}
+
+/**
+ * lpfc_sli4_post_all_rpi_hdrs - Post the rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * This routine does not require any locks. It's usage is expected
+ * to be driver load or reset recovery when the driver is
+ * sequential.
+ *
+ * Return codes
+ * 0 - sucessful
+ * EIO - The mailbox failed to complete successfully.
+ * When this error occurs, the driver is not guaranteed
+ * to have any rpi regions posted to the device and
+ * must either attempt to repost the regions or take a
+ * fatal error.
+ **/
+int
+lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba)
+{
+ struct lpfc_rpi_hdr *rpi_page;
+ uint32_t rc = 0;
+
+ /* Post all rpi memory regions to the port. */
+ list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) {
+ rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2008 Error %d posting all rpi "
+ "headers\n", rc);
+ rc = -EIO;
+ break;
+ }
+ }
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_post_rpi_hdr - Post an rpi header memory region to the port
+ * @phba: pointer to lpfc hba data structure.
+ * @rpi_page: pointer to the rpi memory region.
+ *
+ * This routine is invoked to post a single rpi header to the
+ * HBA consistent with the SLI-4 interface spec. This memory region
+ * maps up to 64 rpi context regions.
+ *
+ * Return codes
+ * 0 - sucessful
+ * ENOMEM - No available memory
+ * EIO - The mailbox failed to complete successfully.
+ **/
+int
+lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
+{
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl;
+ uint32_t rc = 0;
+ uint32_t mbox_tmo;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+
+ /* The port is notified of the header region via a mailbox command. */
+ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2001 Unable to allocate memory for issuing "
+ "SLI_CONFIG_SPECIAL mailbox command\n");
+ return -ENOMEM;
+ }
+
+ /* Post all rpi memory regions to the port. */
+ hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl;
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG);
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
+ sizeof(struct lpfc_mbx_post_hdr_tmpl) -
+ sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+ bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
+ hdr_tmpl, rpi_page->page_count);
+ bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
+ rpi_page->start_rpi);
+ hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys);
+ hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys);
+ if (!phba->sli4_hba.intr_enable)
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ else
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ shdr = (union lpfc_sli4_cfg_shdr *) &hdr_tmpl->header.cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2514 POST_RPI_HDR mailbox failed with "
+ "status x%x add_status x%x, mbx status x%x\n",
+ shdr_status, shdr_add_status, rc);
+ rc = -ENXIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_sli4_alloc_rpi - Get an available rpi in the device's range
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to post rpi header templates to the
+ * HBA consistent with the SLI-4 interface spec. This routine
+ * posts a PAGE_SIZE memory region to the port to hold up to
+ * PAGE_SIZE modulo 64 rpi context headers.
+ *
+ * Returns
+ * A nonzero rpi defined as rpi_base <= rpi < max_rpi if sucessful
+ * LPFC_RPI_ALLOC_ERROR if no rpis are available.
+ **/
+int
+lpfc_sli4_alloc_rpi(struct lpfc_hba *phba)
+{
+ int rpi;
+ uint16_t max_rpi, rpi_base, rpi_limit;
+ uint16_t rpi_remaining;
+ struct lpfc_rpi_hdr *rpi_hdr;
+
+ max_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+ rpi_base = phba->sli4_hba.max_cfg_param.rpi_base;
+ rpi_limit = phba->sli4_hba.next_rpi;
+
+ /*
+ * The valid rpi range is not guaranteed to be zero-based. Start
+ * the search at the rpi_base as reported by the port.
+ */
+ spin_lock_irq(&phba->hbalock);
+ rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base);
+ if (rpi >= rpi_limit || rpi < rpi_base)
+ rpi = LPFC_RPI_ALLOC_ERROR;
+ else {
+ set_bit(rpi, phba->sli4_hba.rpi_bmask);
+ phba->sli4_hba.max_cfg_param.rpi_used++;
+ phba->sli4_hba.rpi_count++;
+ }
+
+ /*
+ * Don't try to allocate more rpi header regions if the device limit
+ * on available rpis max has been exhausted.
+ */
+ if ((rpi == LPFC_RPI_ALLOC_ERROR) &&
+ (phba->sli4_hba.rpi_count >= max_rpi)) {
+ spin_unlock_irq(&phba->hbalock);
+ return rpi;
+ }
+
+ /*
+ * If the driver is running low on rpi resources, allocate another
+ * page now. Note that the next_rpi value is used because
+ * it represents how many are actually in use whereas max_rpi notes
+ * how many are supported max by the device.
+ */
+ rpi_remaining = phba->sli4_hba.next_rpi - rpi_base -
+ phba->sli4_hba.rpi_count;
+ spin_unlock_irq(&phba->hbalock);
+ if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) {
+ rpi_hdr = lpfc_sli4_create_rpi_hdr(phba);
+ if (!rpi_hdr) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2002 Error Could not grow rpi "
+ "count\n");
+ } else {
+ lpfc_sli4_post_rpi_hdr(phba, rpi_hdr);
+ }
+ }
+
+ return rpi;
+}
+
+/**
+ * lpfc_sli4_free_rpi - Release an rpi for reuse.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to release an rpi to the pool of
+ * available rpis maintained by the driver.
+ **/
+void
+lpfc_sli4_free_rpi(struct lpfc_hba *phba, int rpi)
+{
+ spin_lock_irq(&phba->hbalock);
+ clear_bit(rpi, phba->sli4_hba.rpi_bmask);
+ phba->sli4_hba.rpi_count--;
+ phba->sli4_hba.max_cfg_param.rpi_used--;
+ spin_unlock_irq(&phba->hbalock);
+}
+
+/**
+ * lpfc_sli4_remove_rpis - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+void
+lpfc_sli4_remove_rpis(struct lpfc_hba *phba)
+{
+ kfree(phba->sli4_hba.rpi_bmask);
+}
+
+/**
+ * lpfc_sli4_resume_rpi - Remove the rpi bitmask region
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to remove the memory region that
+ * provided rpi via a bitmask.
+ **/
+int
+lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
+{
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_hba *phba = ndlp->phba;
+ int rc;
+
+ /* The port is notified of the header region via a mailbox command. */
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /* Post all rpi memory regions to the port. */
+ lpfc_resume_rpi(mboxq, ndlp);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2010 Resume RPI Mailbox failed "
+ "status %d, mbxStatus x%x\n", rc,
+ bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ * lpfc_sli4_init_vpi - Initialize a vpi with the port
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: vpi value to activate with the port.
+ *
+ * This routine is invoked to activate a vpi with the
+ * port when the host intends to use vports with a
+ * nonzero vpi.
+ *
+ * Returns:
+ * 0 success
+ * -Evalue otherwise
+ **/
+int
+lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
+{
+ LPFC_MBOXQ_t *mboxq;
+ int rc = 0;
+ uint32_t mbox_tmo;
+
+ if (vpi == 0)
+ return -EINVAL;
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+ lpfc_init_vpi(mboxq, vpi);
+ mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
+ rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ if (rc != MBX_SUCCESS) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "2022 INIT VPI Mailbox failed "
+ "status %d, mbxStatus x%x\n", rc,
+ bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+ rc = -EIO;
+ }
+ return rc;
+}
+
+/**
+ * lpfc_mbx_cmpl_add_fcf_record - add fcf mbox completion handler.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: Pointer to mailbox object.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record. This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+static void
+lpfc_mbx_cmpl_add_fcf_record(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+ void *virt_addr;
+ union lpfc_sli4_cfg_shdr *shdr;
+ uint32_t shdr_status, shdr_add_status;
+
+ virt_addr = mboxq->sge_array->addr[0];
+ /* The IOCTL status is embedded in the mailbox subheader. */
+ shdr = (union lpfc_sli4_cfg_shdr *) virt_addr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+
+ if ((shdr_status || shdr_add_status) &&
+ (shdr_status != STATUS_FCF_IN_USE))
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2558 ADD_FCF_RECORD mailbox failed with "
+ "status x%x add_status x%x\n",
+ shdr_status, shdr_add_status);
+
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+}
+
+/**
+ * lpfc_sli4_add_fcf_record - Manually add an FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record: pointer to the initialized fcf record to add.
+ *
+ * This routine is invoked to manually add a single FCF record. The caller
+ * must pass a completely initialized FCF_Record. This routine takes
+ * care of the nonembedded mailbox operations.
+ **/
+int
+lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
+{
+ int rc = 0;
+ LPFC_MBOXQ_t *mboxq;
+ uint8_t *bytep;
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ struct lpfc_mbx_sge sge;
+ uint32_t alloc_len, req_len;
+ uint32_t fcfindex;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2009 Failed to allocate mbox for ADD_FCF cmd\n");
+ return -ENOMEM;
+ }
+
+ req_len = sizeof(struct fcf_record) + sizeof(union lpfc_sli4_cfg_shdr) +
+ sizeof(uint32_t);
+
+ /* Allocate DMA memory and set up the non-embedded mailbox command */
+ alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_ADD_FCF,
+ req_len, LPFC_SLI4_MBX_NEMBED);
+ if (alloc_len < req_len) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2523 Allocated DMA memory size (x%x) is "
+ "less than the requested DMA memory "
+ "size (x%x)\n", alloc_len, req_len);
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+
+ /*
+ * Get the first SGE entry from the non-embedded DMA memory. This
+ * routine only uses a single SGE.
+ */
+ lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+ phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+ if (unlikely(!mboxq->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2526 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+ virt_addr = mboxq->sge_array->addr[0];
+ /*
+ * Configure the FCF record for FCFI 0. This is the driver's
+ * hardcoded default and gets used in nonFIP mode.
+ */
+ fcfindex = bf_get(lpfc_fcf_record_fcf_index, fcf_record);
+ bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+ lpfc_sli_pcimem_bcopy(&fcfindex, bytep, sizeof(uint32_t));
+
+ /*
+ * Copy the fcf_index and the FCF Record Data. The data starts after
+ * the FCoE header plus word10. The data copy needs to be endian
+ * correct.
+ */
+ bytep += sizeof(uint32_t);
+ lpfc_sli_pcimem_bcopy(fcf_record, bytep, sizeof(struct fcf_record));
+ mboxq->vport = phba->pport;
+ mboxq->mbox_cmpl = lpfc_mbx_cmpl_add_fcf_record;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2515 ADD_FCF_RECORD mailbox failed with "
+ "status 0x%x\n", rc);
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ rc = -EIO;
+ } else
+ rc = 0;
+
+ return rc;
+}
+
+/**
+ * lpfc_sli4_build_dflt_fcf_record - Build the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_record: pointer to the fcf record to write the default data.
+ * @fcf_index: FCF table entry index.
+ *
+ * This routine is invoked to build the driver's default FCF record. The
+ * values used are hardcoded. This routine handles memory initialization.
+ *
+ **/
+void
+lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
+ struct fcf_record *fcf_record,
+ uint16_t fcf_index)
+{
+ memset(fcf_record, 0, sizeof(struct fcf_record));
+ fcf_record->max_rcv_size = LPFC_FCOE_MAX_RCV_SIZE;
+ fcf_record->fka_adv_period = LPFC_FCOE_FKA_ADV_PER;
+ fcf_record->fip_priority = LPFC_FCOE_FIP_PRIORITY;
+ bf_set(lpfc_fcf_record_mac_0, fcf_record, phba->fc_map[0]);
+ bf_set(lpfc_fcf_record_mac_1, fcf_record, phba->fc_map[1]);
+ bf_set(lpfc_fcf_record_mac_2, fcf_record, phba->fc_map[2]);
+ bf_set(lpfc_fcf_record_mac_3, fcf_record, LPFC_FCOE_FCF_MAC3);
+ bf_set(lpfc_fcf_record_mac_4, fcf_record, LPFC_FCOE_FCF_MAC4);
+ bf_set(lpfc_fcf_record_mac_5, fcf_record, LPFC_FCOE_FCF_MAC5);
+ bf_set(lpfc_fcf_record_fc_map_0, fcf_record, phba->fc_map[0]);
+ bf_set(lpfc_fcf_record_fc_map_1, fcf_record, phba->fc_map[1]);
+ bf_set(lpfc_fcf_record_fc_map_2, fcf_record, phba->fc_map[2]);
+ bf_set(lpfc_fcf_record_fcf_valid, fcf_record, 1);
+ bf_set(lpfc_fcf_record_fcf_index, fcf_record, fcf_index);
+ bf_set(lpfc_fcf_record_mac_addr_prov, fcf_record,
+ LPFC_FCF_FPMA | LPFC_FCF_SPMA);
+ /* Set the VLAN bit map */
+ if (phba->valid_vlan) {
+ fcf_record->vlan_bitmap[phba->vlan_id / 8]
+ = 1 << (phba->vlan_id % 8);
+ }
+}
+
+/**
+ * lpfc_sli4_read_fcf_record - Read the driver's default FCF Record.
+ * @phba: pointer to lpfc hba data structure.
+ * @fcf_index: FCF table entry offset.
+ *
+ * This routine is invoked to read up to @fcf_num of FCF record from the
+ * device starting with the given @fcf_index.
+ **/
+int
+lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
+{
+ int rc = 0, error;
+ LPFC_MBOXQ_t *mboxq;
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ uint8_t *bytep;
+ struct lpfc_mbx_sge sge;
+ uint32_t alloc_len, req_len;
+ struct lpfc_mbx_read_fcf_tbl *read_fcf;
+
+ mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "2000 Failed to allocate mbox for "
+ "READ_FCF cmd\n");
+ return -ENOMEM;
+ }
+
+ req_len = sizeof(struct fcf_record) +
+ sizeof(union lpfc_sli4_cfg_shdr) + 2 * sizeof(uint32_t);
+
+ /* Set up READ_FCF SLI4_CONFIG mailbox-ioctl command */
+ alloc_len = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
+ LPFC_MBOX_OPCODE_FCOE_READ_FCF_TABLE, req_len,
+ LPFC_SLI4_MBX_NEMBED);
+
+ if (alloc_len < req_len) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0291 Allocated DMA memory size (x%x) is "
+ "less than the requested DMA memory "
+ "size (x%x)\n", alloc_len, req_len);
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+
+ /* Get the first SGE entry from the non-embedded DMA memory. This
+ * routine only uses a single SGE.
+ */
+ lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
+ phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
+ if (unlikely(!mboxq->sge_array)) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+ "2527 Failed to get the non-embedded SGE "
+ "virtual address\n");
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ return -ENOMEM;
+ }
+ virt_addr = mboxq->sge_array->addr[0];
+ read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
+
+ /* Set up command fields */
+ bf_set(lpfc_mbx_read_fcf_tbl_indx, &read_fcf->u.request, fcf_index);
+ /* Perform necessary endian conversion */
+ bytep = virt_addr + sizeof(union lpfc_sli4_cfg_shdr);
+ lpfc_sli_pcimem_bcopy(bytep, bytep, sizeof(uint32_t));
+ mboxq->vport = phba->pport;
+ mboxq->mbox_cmpl = lpfc_mbx_cmpl_read_fcf_record;
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+ if (rc == MBX_NOT_FINISHED) {
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ error = -EIO;
+ } else
+ error = 0;
+ return error;
+}
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index 8839386..7d37eb7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -29,13 +29,23 @@
LPFC_CTX_HOST
} lpfc_ctx_cmd;
+/* This structure is used to carry the needed response IOCB states */
+struct lpfc_sli4_rspiocb_info {
+ uint8_t hw_status;
+ uint8_t bfield;
+#define LPFC_XB 0x1
+#define LPFC_PV 0x2
+ uint8_t priority;
+ uint8_t reserved;
+};
+
/* This structure is used to handle IOCB requests / responses */
struct lpfc_iocbq {
/* lpfc_iocbqs are used in double linked lists */
struct list_head list;
struct list_head clist;
uint16_t iotag; /* pre-assigned IO tag */
- uint16_t rsvd1;
+ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
IOCB_t iocb; /* IOCB cmd */
uint8_t retry; /* retry counter for IOCB cmd - if needed */
@@ -65,7 +75,7 @@
struct lpfc_iocbq *);
void (*iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
struct lpfc_iocbq *);
-
+ struct lpfc_sli4_rspiocb_info sli4_info;
};
#define SLI_IOCB_RET_IOCB 1 /* Return IOCB if cmd ring full */
@@ -81,14 +91,18 @@
typedef struct lpfcMboxq {
/* MBOXQs are used in single linked lists */
struct list_head list; /* ptr to next mailbox command */
- MAILBOX_t mb; /* Mailbox cmd */
- struct lpfc_vport *vport;/* virutal port pointer */
+ union {
+ MAILBOX_t mb; /* Mailbox cmd */
+ struct lpfc_mqe mqe;
+ } u;
+ struct lpfc_vport *vport;/* virtual port pointer */
void *context1; /* caller context information */
void *context2; /* caller context information */
void (*mbox_cmpl) (struct lpfc_hba *, struct lpfcMboxq *);
uint8_t mbox_flag;
-
+ struct lpfc_mcqe mcqe;
+ struct lpfc_mbx_nembed_sge_virt *sge_array;
} LPFC_MBOXQ_t;
#define MBX_POLL 1 /* poll mailbox till command done, then
@@ -230,10 +244,11 @@
/* Additional sli_flags */
#define LPFC_SLI_MBOX_ACTIVE 0x100 /* HBA mailbox is currently active */
-#define LPFC_SLI2_ACTIVE 0x200 /* SLI2 overlay in firmware is active */
+#define LPFC_SLI_ACTIVE 0x200 /* SLI in firmware is active */
#define LPFC_PROCESS_LA 0x400 /* Able to process link attention */
#define LPFC_BLOCK_MGMT_IO 0x800 /* Don't allow mgmt mbx or iocb cmds */
#define LPFC_MENLO_MAINT 0x1000 /* need for menl fw download */
+#define LPFC_SLI_ASYNC_MBX_BLK 0x2000 /* Async mailbox is blocked */
struct lpfc_sli_ring ring[LPFC_MAX_RING];
int fcp_ring; /* ring used for FCP initiator commands */
@@ -261,6 +276,8 @@
#define LPFC_MBOX_TMO 30 /* Sec tmo for outstanding mbox
command */
+#define LPFC_MBOX_SLI4_CONFIG_TMO 60 /* Sec tmo for outstanding mbox
+ command */
#define LPFC_MBOX_TMO_FLASH_CMD 300 /* Sec tmo for outstanding FLASH write
* or erase cmds. This is especially
* long because of the potential of
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
new file mode 100644
index 0000000..5196b46
--- /dev/null
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -0,0 +1,467 @@
+/*******************************************************************
+ * This file is part of the Emulex Linux Device Driver for *
+ * Fibre Channel Host Bus Adapters. *
+ * Copyright (C) 2009 Emulex. All rights reserved. *
+ * EMULEX and SLI are trademarks of Emulex. *
+ * www.emulex.com *
+ * *
+ * This program is free software; you can redistribute it and/or *
+ * modify it under the terms of version 2 of the GNU General *
+ * Public License as published by the Free Software Foundation. *
+ * This program is distributed in the hope that it will be useful. *
+ * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
+ * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
+ * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
+ * TO BE LEGALLY INVALID. See the GNU General Public License for *
+ * more details, a copy of which can be found in the file COPYING *
+ * included with this package. *
+ *******************************************************************/
+
+#define LPFC_ACTIVE_MBOX_WAIT_CNT 100
+#define LPFC_RELEASE_NOTIFICATION_INTERVAL 32
+#define LPFC_GET_QE_REL_INT 32
+#define LPFC_RPI_LOW_WATER_MARK 10
+/* Number of SGL entries can be posted in a 4KB nonembedded mbox command */
+#define LPFC_NEMBED_MBOX_SGL_CNT 254
+
+/* Multi-queue arrangement for fast-path FCP work queues */
+#define LPFC_FN_EQN_MAX 8
+#define LPFC_SP_EQN_DEF 1
+#define LPFC_FP_EQN_DEF 1
+#define LPFC_FP_EQN_MIN 1
+#define LPFC_FP_EQN_MAX (LPFC_FN_EQN_MAX - LPFC_SP_EQN_DEF)
+
+#define LPFC_FN_WQN_MAX 32
+#define LPFC_SP_WQN_DEF 1
+#define LPFC_FP_WQN_DEF 4
+#define LPFC_FP_WQN_MIN 1
+#define LPFC_FP_WQN_MAX (LPFC_FN_WQN_MAX - LPFC_SP_WQN_DEF)
+
+/*
+ * Provide the default FCF Record attributes used by the driver
+ * when nonFIP mode is configured and there is no other default
+ * FCF Record attributes.
+ */
+#define LPFC_FCOE_FCF_DEF_INDEX 0
+#define LPFC_FCOE_FCF_GET_FIRST 0xFFFF
+#define LPFC_FCOE_FCF_NEXT_NONE 0xFFFF
+
+/* First 3 bytes of default FCF MAC is specified by FC_MAP */
+#define LPFC_FCOE_FCF_MAC3 0xFF
+#define LPFC_FCOE_FCF_MAC4 0xFF
+#define LPFC_FCOE_FCF_MAC5 0xFE
+#define LPFC_FCOE_FCF_MAP0 0x0E
+#define LPFC_FCOE_FCF_MAP1 0xFC
+#define LPFC_FCOE_FCF_MAP2 0x00
+#define LPFC_FCOE_MAX_RCV_SIZE 0x5AC
+#define LPFC_FCOE_FKA_ADV_PER 0
+#define LPFC_FCOE_FIP_PRIORITY 0x80
+
+enum lpfc_sli4_queue_type {
+ LPFC_EQ,
+ LPFC_GCQ,
+ LPFC_MCQ,
+ LPFC_WCQ,
+ LPFC_RCQ,
+ LPFC_MQ,
+ LPFC_WQ,
+ LPFC_HRQ,
+ LPFC_DRQ
+};
+
+/* The queue sub-type defines the functional purpose of the queue */
+enum lpfc_sli4_queue_subtype {
+ LPFC_NONE,
+ LPFC_MBOX,
+ LPFC_FCP,
+ LPFC_ELS,
+ LPFC_USOL
+};
+
+union sli4_qe {
+ void *address;
+ struct lpfc_eqe *eqe;
+ struct lpfc_cqe *cqe;
+ struct lpfc_mcqe *mcqe;
+ struct lpfc_wcqe_complete *wcqe_complete;
+ struct lpfc_wcqe_release *wcqe_release;
+ struct sli4_wcqe_xri_aborted *wcqe_xri_aborted;
+ struct lpfc_rcqe_complete *rcqe_complete;
+ struct lpfc_mqe *mqe;
+ union lpfc_wqe *wqe;
+ struct lpfc_rqe *rqe;
+};
+
+struct lpfc_queue {
+ struct list_head list;
+ enum lpfc_sli4_queue_type type;
+ enum lpfc_sli4_queue_subtype subtype;
+ struct lpfc_hba *phba;
+ struct list_head child_list;
+ uint32_t entry_count; /* Number of entries to support on the queue */
+ uint32_t entry_size; /* Size of each queue entry. */
+ uint32_t queue_id; /* Queue ID assigned by the hardware */
+ struct list_head page_list;
+ uint32_t page_count; /* Number of pages allocated for this queue */
+
+ uint32_t host_index; /* The host's index for putting or getting */
+ uint32_t hba_index; /* The last known hba index for get or put */
+ union sli4_qe qe[1]; /* array to index entries (must be last) */
+};
+
+struct lpfc_cq_event {
+ struct list_head list;
+ union {
+ struct lpfc_mcqe mcqe_cmpl;
+ struct lpfc_acqe_link acqe_link;
+ struct lpfc_acqe_fcoe acqe_fcoe;
+ struct lpfc_acqe_dcbx acqe_dcbx;
+ struct lpfc_rcqe rcqe_cmpl;
+ struct sli4_wcqe_xri_aborted wcqe_axri;
+ } cqe;
+};
+
+struct lpfc_sli4_link {
+ uint8_t speed;
+ uint8_t duplex;
+ uint8_t status;
+ uint8_t physical;
+ uint8_t fault;
+};
+
+struct lpfc_fcf {
+ uint8_t fabric_name[8];
+ uint8_t mac_addr[6];
+ uint16_t fcf_indx;
+ uint16_t fcfi;
+ uint32_t fcf_flag;
+#define FCF_AVAILABLE 0x01 /* FCF available for discovery */
+#define FCF_REGISTERED 0x02 /* FCF registered with FW */
+#define FCF_DISCOVERED 0x04 /* FCF discovery started */
+#define FCF_BOOT_ENABLE 0x08 /* Boot bios use this FCF */
+#define FCF_IN_USE 0x10 /* Atleast one discovery completed */
+#define FCF_VALID_VLAN 0x20 /* Use the vlan id specified */
+ uint32_t priority;
+ uint32_t addr_mode;
+ uint16_t vlan_id;
+};
+
+#define LPFC_REGION23_SIGNATURE "RG23"
+#define LPFC_REGION23_VERSION 1
+#define LPFC_REGION23_LAST_REC 0xff
+struct lpfc_fip_param_hdr {
+ uint8_t type;
+#define FCOE_PARAM_TYPE 0xA0
+ uint8_t length;
+#define FCOE_PARAM_LENGTH 2
+ uint8_t parm_version;
+#define FIPP_VERSION 0x01
+ uint8_t parm_flags;
+#define lpfc_fip_param_hdr_fipp_mode_SHIFT 6
+#define lpfc_fip_param_hdr_fipp_mode_MASK 0x3
+#define lpfc_fip_param_hdr_fipp_mode_WORD parm_flags
+#define FIPP_MODE_ON 0x2
+#define FIPP_MODE_OFF 0x0
+#define FIPP_VLAN_VALID 0x1
+};
+
+struct lpfc_fcoe_params {
+ uint8_t fc_map[3];
+ uint8_t reserved1;
+ uint16_t vlan_tag;
+ uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_hdr {
+ uint8_t type;
+#define FCOE_CONN_TBL_TYPE 0xA1
+ uint8_t length; /* words */
+ uint8_t reserved[2];
+};
+
+struct lpfc_fcf_conn_rec {
+ uint16_t flags;
+#define FCFCNCT_VALID 0x0001
+#define FCFCNCT_BOOT 0x0002
+#define FCFCNCT_PRIMARY 0x0004 /* if not set, Secondary */
+#define FCFCNCT_FBNM_VALID 0x0008
+#define FCFCNCT_SWNM_VALID 0x0010
+#define FCFCNCT_VLAN_VALID 0x0020
+#define FCFCNCT_AM_VALID 0x0040
+#define FCFCNCT_AM_PREFERRED 0x0080 /* if not set, AM Required */
+#define FCFCNCT_AM_SPMA 0x0100 /* if not set, FPMA */
+
+ uint16_t vlan_tag;
+ uint8_t fabric_name[8];
+ uint8_t switch_name[8];
+};
+
+struct lpfc_fcf_conn_entry {
+ struct list_head list;
+ struct lpfc_fcf_conn_rec conn_rec;
+};
+
+/*
+ * Define the host's bootstrap mailbox. This structure contains
+ * the member attributes needed to create, use, and destroy the
+ * bootstrap mailbox region.
+ *
+ * The macro definitions for the bmbx data structure are defined
+ * in lpfc_hw4.h with the register definition.
+ */
+struct lpfc_bmbx {
+ struct lpfc_dmabuf *dmabuf;
+ struct dma_address dma_address;
+ void *avirt;
+ dma_addr_t aphys;
+ uint32_t bmbx_size;
+};
+
+#define LPFC_EQE_SIZE LPFC_EQE_SIZE_4
+
+#define LPFC_EQE_SIZE_4B 4
+#define LPFC_EQE_SIZE_16B 16
+#define LPFC_CQE_SIZE 16
+#define LPFC_WQE_SIZE 64
+#define LPFC_MQE_SIZE 256
+#define LPFC_RQE_SIZE 8
+
+#define LPFC_EQE_DEF_COUNT 1024
+#define LPFC_CQE_DEF_COUNT 256
+#define LPFC_WQE_DEF_COUNT 64
+#define LPFC_MQE_DEF_COUNT 16
+#define LPFC_RQE_DEF_COUNT 512
+
+#define LPFC_QUEUE_NOARM false
+#define LPFC_QUEUE_REARM true
+
+
+/*
+ * SLI4 CT field defines
+ */
+#define SLI4_CT_RPI 0
+#define SLI4_CT_VPI 1
+#define SLI4_CT_VFI 2
+#define SLI4_CT_FCFI 3
+
+#define LPFC_SLI4_MAX_SEGMENT_SIZE 0x10000
+
+/*
+ * SLI4 specific data structures
+ */
+struct lpfc_max_cfg_param {
+ uint16_t max_xri;
+ uint16_t xri_base;
+ uint16_t xri_used;
+ uint16_t max_rpi;
+ uint16_t rpi_base;
+ uint16_t rpi_used;
+ uint16_t max_vpi;
+ uint16_t vpi_base;
+ uint16_t vpi_used;
+ uint16_t max_vfi;
+ uint16_t vfi_base;
+ uint16_t vfi_used;
+ uint16_t max_fcfi;
+ uint16_t fcfi_base;
+ uint16_t fcfi_used;
+ uint16_t max_eq;
+ uint16_t max_rq;
+ uint16_t max_cq;
+ uint16_t max_wq;
+};
+
+struct lpfc_hba;
+/* SLI4 HBA multi-fcp queue handler struct */
+struct lpfc_fcp_eq_hdl {
+ uint32_t idx;
+ struct lpfc_hba *phba;
+};
+
+/* SLI4 HBA data structure entries */
+struct lpfc_sli4_hba {
+ void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR0, config space registers */
+ void __iomem *ctrl_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR1, control registers */
+ void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
+ PCI BAR2, doorbell registers */
+ /* BAR0 PCI config space register memory map */
+ void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
+ void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
+ void __iomem *ONLINE0regaddr; /* Address to components of internal UE */
+ void __iomem *ONLINE1regaddr; /* Address to components of internal UE */
+#define LPFC_ONLINE_NERR 0xFFFFFFFF
+ void __iomem *SCRATCHPADregaddr; /* Address to scratchpad register */
+ /* BAR1 FCoE function CSR register memory map */
+ void __iomem *STAregaddr; /* Address to HST_STATE register */
+ void __iomem *ISRregaddr; /* Address to HST_ISR register */
+ void __iomem *IMRregaddr; /* Address to HST_IMR register */
+ void __iomem *ISCRregaddr; /* Address to HST_ISCR register */
+ /* BAR2 VF-0 doorbell register memory map */
+ void __iomem *RQDBregaddr; /* Address to RQ_DOORBELL register */
+ void __iomem *WQDBregaddr; /* Address to WQ_DOORBELL register */
+ void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
+ void __iomem *MQDBregaddr; /* Address to MQ_DOORBELL register */
+ void __iomem *BMBXregaddr; /* Address to BootStrap MBX register */
+
+ struct msix_entry *msix_entries;
+ uint32_t cfg_eqn;
+ struct lpfc_fcp_eq_hdl *fcp_eq_hdl; /* FCP per-WQ handle */
+ /* Pointers to the constructed SLI4 queues */
+ struct lpfc_queue **fp_eq; /* Fast-path event queue */
+ struct lpfc_queue *sp_eq; /* Slow-path event queue */
+ struct lpfc_queue **fcp_wq;/* Fast-path FCP work queue */
+ struct lpfc_queue *mbx_wq; /* Slow-path MBOX work queue */
+ struct lpfc_queue *els_wq; /* Slow-path ELS work queue */
+ struct lpfc_queue *hdr_rq; /* Slow-path Header Receive queue */
+ struct lpfc_queue *dat_rq; /* Slow-path Data Receive queue */
+ struct lpfc_queue **fcp_cq;/* Fast-path FCP compl queue */
+ struct lpfc_queue *mbx_cq; /* Slow-path mailbox complete queue */
+ struct lpfc_queue *els_cq; /* Slow-path ELS response complete queue */
+ struct lpfc_queue *rxq_cq; /* Slow-path unsolicited complete queue */
+
+ /* Setup information for various queue parameters */
+ int eq_esize;
+ int eq_ecount;
+ int cq_esize;
+ int cq_ecount;
+ int wq_esize;
+ int wq_ecount;
+ int mq_esize;
+ int mq_ecount;
+ int rq_esize;
+ int rq_ecount;
+#define LPFC_SP_EQ_MAX_INTR_SEC 10000
+#define LPFC_FP_EQ_MAX_INTR_SEC 10000
+
+ uint32_t intr_enable;
+ struct lpfc_bmbx bmbx;
+ struct lpfc_max_cfg_param max_cfg_param;
+ uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */
+ uint16_t next_rpi;
+ uint16_t scsi_xri_max;
+ uint16_t scsi_xri_cnt;
+ struct list_head lpfc_free_sgl_list;
+ struct list_head lpfc_sgl_list;
+ struct lpfc_sglq **lpfc_els_sgl_array;
+ struct list_head lpfc_abts_els_sgl_list;
+ struct lpfc_scsi_buf **lpfc_scsi_psb_array;
+ struct list_head lpfc_abts_scsi_buf_list;
+ uint32_t total_sglq_bufs;
+ struct lpfc_sglq **lpfc_sglq_active_list;
+ struct list_head lpfc_rpi_hdr_list;
+ unsigned long *rpi_bmask;
+ uint16_t rpi_count;
+ struct lpfc_sli4_flags sli4_flags;
+ struct list_head sp_rspiocb_work_queue;
+ struct list_head sp_cqe_event_pool;
+ struct list_head sp_asynce_work_queue;
+ struct list_head sp_fcp_xri_aborted_work_queue;
+ struct list_head sp_els_xri_aborted_work_queue;
+ struct list_head sp_unsol_work_queue;
+ struct lpfc_sli4_link link_state;
+ spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
+ spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
+};
+
+enum lpfc_sge_type {
+ GEN_BUFF_TYPE,
+ SCSI_BUFF_TYPE
+};
+
+struct lpfc_sglq {
+ /* lpfc_sglqs are used in double linked lists */
+ struct list_head list;
+ struct list_head clist;
+ enum lpfc_sge_type buff_type; /* is this a scsi sgl */
+ uint16_t iotag; /* pre-assigned IO tag */
+ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */
+ struct sli4_sge *sgl; /* pre-assigned SGL */
+ void *virt; /* virtual address. */
+ dma_addr_t phys; /* physical address */
+};
+
+struct lpfc_rpi_hdr {
+ struct list_head list;
+ uint32_t len;
+ struct lpfc_dmabuf *dmabuf;
+ uint32_t page_count;
+ uint32_t start_rpi;
+};
+
+/*
+ * SLI4 specific function prototypes
+ */
+int lpfc_pci_function_reset(struct lpfc_hba *);
+int lpfc_sli4_hba_setup(struct lpfc_hba *);
+int lpfc_sli4_hba_down(struct lpfc_hba *);
+int lpfc_sli4_config(struct lpfc_hba *, struct lpfcMboxq *, uint8_t,
+ uint8_t, uint32_t, bool);
+void lpfc_sli4_mbox_cmd_free(struct lpfc_hba *, struct lpfcMboxq *);
+void lpfc_sli4_mbx_sge_set(struct lpfcMboxq *, uint32_t, dma_addr_t, uint32_t);
+void lpfc_sli4_mbx_sge_get(struct lpfcMboxq *, uint32_t,
+ struct lpfc_mbx_sge *);
+
+void lpfc_sli4_hba_reset(struct lpfc_hba *);
+struct lpfc_queue *lpfc_sli4_queue_alloc(struct lpfc_hba *, uint32_t,
+ uint32_t);
+void lpfc_sli4_queue_free(struct lpfc_queue *);
+uint32_t lpfc_eq_create(struct lpfc_hba *, struct lpfc_queue *, uint16_t);
+uint32_t lpfc_cq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t, uint32_t);
+uint32_t lpfc_mq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t);
+uint32_t lpfc_wq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, uint32_t);
+uint32_t lpfc_rq_create(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *, struct lpfc_queue *, uint32_t);
+uint32_t lpfc_eq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_cq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_mq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_wq_destroy(struct lpfc_hba *, struct lpfc_queue *);
+uint32_t lpfc_rq_destroy(struct lpfc_hba *, struct lpfc_queue *,
+ struct lpfc_queue *);
+int lpfc_sli4_queue_setup(struct lpfc_hba *);
+void lpfc_sli4_queue_unset(struct lpfc_hba *);
+int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t);
+int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *);
+int lpfc_sli4_remove_all_sgl_pages(struct lpfc_hba *);
+uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *);
+int lpfc_sli4_post_async_mbox(struct lpfc_hba *);
+int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba);
+int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int);
+struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *);
+void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+void lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *);
+int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_post_rpi_hdr(struct lpfc_hba *, struct lpfc_rpi_hdr *);
+int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
+struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
+void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
+int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
+void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
+void lpfc_sli4_remove_rpis(struct lpfc_hba *);
+void lpfc_sli4_async_event_proc(struct lpfc_hba *);
+int lpfc_sli4_resume_rpi(struct lpfc_nodelist *);
+void lpfc_sli4_fcp_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_els_xri_abort_event_proc(struct lpfc_hba *);
+void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
+ struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
+ struct sli4_wcqe_xri_aborted *);
+int lpfc_sli4_brdreset(struct lpfc_hba *);
+int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
+void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
+int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
+int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
+uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
+void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_read_fcf_record(struct lpfc_hba *, uint16_t);
+void lpfc_mbx_cmpl_read_fcf_record(struct lpfc_hba *, LPFC_MBOXQ_t *);
+int lpfc_sli4_post_status_check(struct lpfc_hba *);
+uint8_t lpfc_sli4_mbox_opcode_get(struct lpfc_hba *, struct lpfcMboxq *);
+
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index e599519..6b8a148 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.1"
+#define LPFC_DRIVER_VERSION "8.3.2"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 917ad56..a6313ee 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -32,8 +32,10 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
+#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
+#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
@@ -89,6 +91,8 @@
vpi = 0;
else
set_bit(vpi, phba->vpi_bmask);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->sli4_hba.max_cfg_param.vpi_used++;
spin_unlock_irq(&phba->hbalock);
return vpi;
}
@@ -96,8 +100,12 @@
static void
lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
{
+ if (vpi == 0)
+ return;
spin_lock_irq(&phba->hbalock);
clear_bit(vpi, phba->vpi_bmask);
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ phba->sli4_hba.max_cfg_param.vpi_used--;
spin_unlock_irq(&phba->hbalock);
}
@@ -113,7 +121,7 @@
if (!pmb) {
return -ENOMEM;
}
- mb = &pmb->mb;
+ mb = &pmb->u.mb;
lpfc_read_sparam(phba, pmb, vport->vpi);
/*
@@ -243,23 +251,22 @@
(vport->fc_flag & wait_flags) ||
((vport->port_state > LPFC_VPORT_FAILED) &&
(vport->port_state < LPFC_VPORT_READY))) {
- lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
"1833 Vport discovery quiesce Wait:"
- " vpi x%x state x%x fc_flags x%x"
+ " state x%x fc_flags x%x"
" num_nodes x%x, waiting 1000 msecs"
" total wait msecs x%x\n",
- vport->vpi, vport->port_state,
- vport->fc_flag, vport->num_disc_nodes,
+ vport->port_state, vport->fc_flag,
+ vport->num_disc_nodes,
jiffies_to_msecs(jiffies - start_time));
msleep(1000);
} else {
/* Base case. Wait variants satisfied. Break out */
- lpfc_printf_log(phba, KERN_INFO, LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_VPORT,
"1834 Vport discovery quiesced:"
- " vpi x%x state x%x fc_flags x%x"
+ " state x%x fc_flags x%x"
" wait msecs x%x\n",
- vport->vpi, vport->port_state,
- vport->fc_flag,
+ vport->port_state, vport->fc_flag,
jiffies_to_msecs(jiffies
- start_time));
break;
@@ -267,12 +274,10 @@
}
if (time_after(jiffies, wait_time_max))
- lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1835 Vport discovery quiesce failed:"
- " vpi x%x state x%x fc_flags x%x"
- " wait msecs x%x\n",
- vport->vpi, vport->port_state,
- vport->fc_flag,
+ " state x%x fc_flags x%x wait msecs x%x\n",
+ vport->port_state, vport->fc_flag,
jiffies_to_msecs(jiffies - start_time));
}
@@ -308,6 +313,21 @@
goto error_out;
}
+ /*
+ * In SLI4, the vpi must be activated before it can be used
+ * by the port.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4) {
+ rc = lpfc_sli4_init_vpi(phba, vpi);
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
+ "1838 Failed to INIT_VPI on vpi %d "
+ "status %d\n", vpi, rc);
+ rc = VPORT_NORESOURCES;
+ lpfc_free_vpi(phba, vpi);
+ goto error_out;
+ }
+ }
/* Assign an unused board number */
if ((instance = lpfc_get_instance()) < 0) {
@@ -535,6 +555,16 @@
"physical host\n");
return VPORT_ERROR;
}
+
+ /* If the vport is a static vport fail the deletion. */
+ if ((vport->vport_flag & STATIC_VPORT) &&
+ !(phba->pport->load_flag & FC_UNLOADING)) {
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
+ "1837 vport_delete failed: Cannot delete "
+ "static vport.\n");
+ return VPORT_ERROR;
+ }
+
/*
* If we are not unloading the driver then prevent the vport_delete
* from happening until after this vport's discovery is finished.
@@ -710,7 +740,7 @@
struct lpfc_vport *port_iterator;
struct lpfc_vport **vports;
int index = 0;
- vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *),
+ vports = kzalloc((phba->max_vports + 1) * sizeof(struct lpfc_vport *),
GFP_KERNEL);
if (vports == NULL)
return NULL;
@@ -734,7 +764,7 @@
int i;
if (vports == NULL)
return;
- for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++)
+ for (i = 0; vports[i] != NULL && i <= phba->max_vports; i++)
scsi_host_put(lpfc_shost_from_vport(vports[i]));
kfree(vports);
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 36b1d10..286c185 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -61,6 +61,7 @@
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_sas.h>
#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
#include "mpt2sas_debug.h"
@@ -68,10 +69,10 @@
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "01.100.02.00"
+#define MPT2SAS_DRIVER_VERSION "01.100.03.00"
#define MPT2SAS_MAJOR_VERSION 01
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 02
+#define MPT2SAS_BUILD_VERSION 03
#define MPT2SAS_RELEASE_VERSION 00
/*
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index ba6ab17..14e473d 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -473,7 +473,7 @@
}
/**
- * _ctl_do_task_abort - assign an active smid to the abort_task
+ * _ctl_set_task_mid - assign an active smid to tm request
* @ioc: per adapter object
* @karg - (struct mpt2_ioctl_command)
* @tm_request - pointer to mf from user space
@@ -482,7 +482,7 @@
* during failure, the reply frame is filled.
*/
static int
-_ctl_do_task_abort(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
+_ctl_set_task_mid(struct MPT2SAS_ADAPTER *ioc, struct mpt2_ioctl_command *karg,
Mpi2SCSITaskManagementRequest_t *tm_request)
{
u8 found = 0;
@@ -494,6 +494,14 @@
Mpi2SCSITaskManagementReply_t *tm_reply;
u32 sz;
u32 lun;
+ char *desc = NULL;
+
+ if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
+ desc = "abort_task";
+ else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
+ desc = "query_task";
+ else
+ return 0;
lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
@@ -517,13 +525,13 @@
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
if (!found) {
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
- "DevHandle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
- tm_request->DevHandle, lun));
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "handle(0x%04x), lun(%d), no active mid!!\n", ioc->name,
+ desc, tm_request->DevHandle, lun));
tm_reply = ioc->ctl_cmds.reply;
tm_reply->DevHandle = tm_request->DevHandle;
tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
- tm_reply->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK;
+ tm_reply->TaskType = tm_request->TaskType;
tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
tm_reply->VP_ID = tm_request->VP_ID;
tm_reply->VF_ID = tm_request->VF_ID;
@@ -535,9 +543,9 @@
return 1;
}
- dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "ABORT_TASK: "
- "DevHandle(0x%04x), lun(%d), smid(%d)\n", ioc->name,
- tm_request->DevHandle, lun, tm_request->TaskMID));
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "handle(0x%04x), lun(%d), task_mid(%d)\n", ioc->name,
+ desc, tm_request->DevHandle, lun, tm_request->TaskMID));
return 0;
}
@@ -739,8 +747,10 @@
(Mpi2SCSITaskManagementRequest_t *)mpi_request;
if (tm_request->TaskType ==
- MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+ MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
+ tm_request->TaskType ==
+ MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
+ if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
mpt2sas_base_free_smid(ioc, smid);
goto out;
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index e3a7967..2a01a5f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -197,12 +197,12 @@
MODULE_DEVICE_TABLE(pci, scsih_pci_table);
/**
- * scsih_set_debug_level - global setting of ioc->logging_level.
+ * _scsih_set_debug_level - global setting of ioc->logging_level.
*
* Note: The logging levels are defined in mpt2sas_debug.h.
*/
static int
-scsih_set_debug_level(const char *val, struct kernel_param *kp)
+_scsih_set_debug_level(const char *val, struct kernel_param *kp)
{
int ret = param_set_int(val, kp);
struct MPT2SAS_ADAPTER *ioc;
@@ -215,7 +215,7 @@
ioc->logging_level = logging_level;
return 0;
}
-module_param_call(logging_level, scsih_set_debug_level, param_get_int,
+module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
&logging_level, 0644);
/**
@@ -884,6 +884,41 @@
}
/**
+ * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
+ * @ioc: per adapter object
+ * @id: target id
+ * @lun: lun number
+ * @channel: channel
+ * Context: This function will acquire ioc->scsi_lookup_lock.
+ *
+ * This will search for a matching channel:id:lun in the scsi_lookup array,
+ * returning 1 if found.
+ */
+static u8
+_scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
+ unsigned int lun, int channel)
+{
+ u8 found;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ found = 0;
+ for (i = 0 ; i < ioc->request_depth; i++) {
+ if (ioc->scsi_lookup[i].scmd &&
+ (ioc->scsi_lookup[i].scmd->device->id == id &&
+ ioc->scsi_lookup[i].scmd->device->channel == channel &&
+ ioc->scsi_lookup[i].scmd->device->lun == lun)) {
+ found = 1;
+ goto out;
+ }
+ }
+ out:
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return found;
+}
+
+/**
* _scsih_get_chain_buffer_dma - obtain block of chains (dma address)
* @ioc: per adapter object
* @smid: system request message index
@@ -1047,14 +1082,14 @@
}
/**
- * scsih_change_queue_depth - setting device queue depth
+ * _scsih_change_queue_depth - setting device queue depth
* @sdev: scsi device struct
* @qdepth: requested queue depth
*
* Returns queue depth.
*/
static int
-scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
struct Scsi_Host *shost = sdev->host;
int max_depth;
@@ -1079,14 +1114,14 @@
}
/**
- * scsih_change_queue_depth - changing device queue tag type
+ * _scsih_change_queue_depth - changing device queue tag type
* @sdev: scsi device struct
* @tag_type: requested tag type
*
* Returns queue tag type.
*/
static int
-scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
+_scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
{
if (sdev->tagged_supported) {
scsi_set_tag_type(sdev, tag_type);
@@ -1101,14 +1136,14 @@
}
/**
- * scsih_target_alloc - target add routine
+ * _scsih_target_alloc - target add routine
* @starget: scsi target struct
*
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
static int
-scsih_target_alloc(struct scsi_target *starget)
+_scsih_target_alloc(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1163,13 +1198,13 @@
}
/**
- * scsih_target_destroy - target destroy routine
+ * _scsih_target_destroy - target destroy routine
* @starget: scsi target struct
*
* Returns nothing.
*/
static void
-scsih_target_destroy(struct scsi_target *starget)
+_scsih_target_destroy(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(&starget->dev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1212,14 +1247,14 @@
}
/**
- * scsih_slave_alloc - device add routine
+ * _scsih_slave_alloc - device add routine
* @sdev: scsi device struct
*
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
static int
-scsih_slave_alloc(struct scsi_device *sdev)
+_scsih_slave_alloc(struct scsi_device *sdev)
{
struct Scsi_Host *shost;
struct MPT2SAS_ADAPTER *ioc;
@@ -1273,13 +1308,13 @@
}
/**
- * scsih_slave_destroy - device destroy routine
+ * _scsih_slave_destroy - device destroy routine
* @sdev: scsi device struct
*
* Returns nothing.
*/
static void
-scsih_slave_destroy(struct scsi_device *sdev)
+_scsih_slave_destroy(struct scsi_device *sdev)
{
struct MPT2SAS_TARGET *sas_target_priv_data;
struct scsi_target *starget;
@@ -1295,13 +1330,13 @@
}
/**
- * scsih_display_sata_capabilities - sata capabilities
+ * _scsih_display_sata_capabilities - sata capabilities
* @ioc: per adapter object
* @sas_device: the sas_device object
* @sdev: scsi device struct
*/
static void
-scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
+_scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc,
struct _sas_device *sas_device, struct scsi_device *sdev)
{
Mpi2ConfigReply_t mpi_reply;
@@ -1401,14 +1436,14 @@
}
/**
- * scsih_slave_configure - device configure routine.
+ * _scsih_slave_configure - device configure routine.
* @sdev: scsi device struct
*
* Returns 0 if ok. Any other return is assumed to be an error and
* the device is ignored.
*/
static int
-scsih_slave_configure(struct scsi_device *sdev)
+_scsih_slave_configure(struct scsi_device *sdev)
{
struct Scsi_Host *shost = sdev->host;
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1489,7 +1524,7 @@
r_level, raid_device->handle,
(unsigned long long)raid_device->wwid,
raid_device->num_pds, ds);
- scsih_change_queue_depth(sdev, qdepth);
+ _scsih_change_queue_depth(sdev, qdepth);
return 0;
}
@@ -1532,10 +1567,10 @@
sas_device->slot);
if (!ssp_target)
- scsih_display_sata_capabilities(ioc, sas_device, sdev);
+ _scsih_display_sata_capabilities(ioc, sas_device, sdev);
}
- scsih_change_queue_depth(sdev, qdepth);
+ _scsih_change_queue_depth(sdev, qdepth);
if (ssp_target)
sas_read_port_mode_page(sdev);
@@ -1543,7 +1578,7 @@
}
/**
- * scsih_bios_param - fetch head, sector, cylinder info for a disk
+ * _scsih_bios_param - fetch head, sector, cylinder info for a disk
* @sdev: scsi device struct
* @bdev: pointer to block device context
* @capacity: device size (in 512 byte sectors)
@@ -1555,7 +1590,7 @@
* Return nothing.
*/
static int
-scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
+_scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int params[])
{
int heads;
@@ -1636,7 +1671,7 @@
}
/**
- * scsih_tm_done - tm completion routine
+ * _scsih_tm_done - tm completion routine
* @ioc: per adapter object
* @smid: system request message index
* @VF_ID: virtual function id
@@ -1648,7 +1683,7 @@
* Return nothing.
*/
static void
-scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
@@ -1823,13 +1858,13 @@
}
/**
- * scsih_abort - eh threads main abort routine
+ * _scsih_abort - eh threads main abort routine
* @sdev: scsi device struct
*
* Returns SUCCESS if command aborted else FAILED
*/
static int
-scsih_abort(struct scsi_cmnd *scmd)
+_scsih_abort(struct scsi_cmnd *scmd)
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1889,15 +1924,86 @@
return r;
}
-
/**
- * scsih_dev_reset - eh threads main device reset routine
+ * _scsih_dev_reset - eh threads main device reset routine
* @sdev: scsi device struct
*
* Returns SUCCESS if command aborted else FAILED
*/
static int
-scsih_dev_reset(struct scsi_cmnd *scmd)
+_scsih_dev_reset(struct scsi_cmnd *scmd)
+{
+ struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
+ struct MPT2SAS_DEVICE *sas_device_priv_data;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ u16 handle;
+ int r;
+
+ printk(MPT2SAS_INFO_FMT "attempting device reset! scmd(%p)\n",
+ ioc->name, scmd);
+ scsi_print_command(scmd);
+
+ sas_device_priv_data = scmd->device->hostdata;
+ if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
+ printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+ ioc->name, scmd);
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ r = SUCCESS;
+ goto out;
+ }
+
+ /* for hidden raid components obtain the volume_handle */
+ handle = 0;
+ if (sas_device_priv_data->sas_target->flags &
+ MPT_TARGET_FLAGS_RAID_COMPONENT) {
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc,
+ sas_device_priv_data->sas_target->handle);
+ if (sas_device)
+ handle = sas_device->volume_handle;
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ } else
+ handle = sas_device_priv_data->sas_target->handle;
+
+ if (!handle) {
+ scmd->result = DID_RESET << 16;
+ r = FAILED;
+ goto out;
+ }
+
+ mutex_lock(&ioc->tm_cmds.mutex);
+ mpt2sas_scsih_issue_tm(ioc, handle, 0,
+ MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, scmd->device->lun,
+ 30);
+
+ /*
+ * sanity check see whether all commands to this device been
+ * completed
+ */
+ if (_scsih_scsi_lookup_find_by_lun(ioc, scmd->device->id,
+ scmd->device->lun, scmd->device->channel))
+ r = FAILED;
+ else
+ r = SUCCESS;
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
+ mutex_unlock(&ioc->tm_cmds.mutex);
+
+ out:
+ printk(MPT2SAS_INFO_FMT "device reset: %s scmd(%p)\n",
+ ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
+ return r;
+}
+
+/**
+ * _scsih_target_reset - eh threads main target reset routine
+ * @sdev: scsi device struct
+ *
+ * Returns SUCCESS if command aborted else FAILED
+ */
+static int
+_scsih_target_reset(struct scsi_cmnd *scmd)
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -1912,7 +2018,7 @@
sas_device_priv_data = scmd->device->hostdata;
if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
- printk(MPT2SAS_INFO_FMT "device been deleted! scmd(%p)\n",
+ printk(MPT2SAS_INFO_FMT "target been deleted! scmd(%p)\n",
ioc->name, scmd);
scmd->result = DID_NO_CONNECT << 16;
scmd->scsi_done(scmd);
@@ -1962,13 +2068,13 @@
}
/**
- * scsih_abort - eh threads main host reset routine
+ * _scsih_abort - eh threads main host reset routine
* @sdev: scsi device struct
*
* Returns SUCCESS if command aborted else FAILED
*/
static int
-scsih_host_reset(struct scsi_cmnd *scmd)
+_scsih_host_reset(struct scsi_cmnd *scmd)
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
int r, retval;
@@ -2390,7 +2496,107 @@
}
/**
- * scsih_qcmd - main scsi request entry point
+ * _scsih_setup_eedp - setup MPI request for EEDP transfer
+ * @scmd: pointer to scsi command object
+ * @mpi_request: pointer to the SCSI_IO reqest message frame
+ *
+ * Supporting protection 1 and 3.
+ *
+ * Returns nothing
+ */
+static void
+_scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request)
+{
+ u16 eedp_flags;
+ unsigned char prot_op = scsi_get_prot_op(scmd);
+ unsigned char prot_type = scsi_get_prot_type(scmd);
+
+ if (prot_type == SCSI_PROT_DIF_TYPE0 ||
+ prot_type == SCSI_PROT_DIF_TYPE2 ||
+ prot_op == SCSI_PROT_NORMAL)
+ return;
+
+ if (prot_op == SCSI_PROT_READ_STRIP)
+ eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
+ else if (prot_op == SCSI_PROT_WRITE_INSERT)
+ eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+ else
+ return;
+
+ mpi_request->EEDPBlockSize = scmd->device->sector_size;
+
+ switch (prot_type) {
+ case SCSI_PROT_DIF_TYPE1:
+
+ /*
+ * enable ref/guard checking
+ * auto increment ref tag
+ */
+ mpi_request->EEDPFlags = eedp_flags |
+ MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+ MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+ MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+ mpi_request->CDB.EEDP32.PrimaryReferenceTag =
+ cpu_to_be32(scsi_get_lba(scmd));
+
+ break;
+
+ case SCSI_PROT_DIF_TYPE3:
+
+ /*
+ * enable guard checking
+ */
+ mpi_request->EEDPFlags = eedp_flags |
+ MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+
+ break;
+ }
+}
+
+/**
+ * _scsih_eedp_error_handling - return sense code for EEDP errors
+ * @scmd: pointer to scsi command object
+ * @ioc_status: ioc status
+ *
+ * Returns nothing
+ */
+static void
+_scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
+{
+ u8 ascq;
+ u8 sk;
+ u8 host_byte;
+
+ switch (ioc_status) {
+ case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+ ascq = 0x01;
+ break;
+ case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+ ascq = 0x02;
+ break;
+ case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+ ascq = 0x03;
+ break;
+ default:
+ ascq = 0x00;
+ break;
+ }
+
+ if (scmd->sc_data_direction == DMA_TO_DEVICE) {
+ sk = ILLEGAL_REQUEST;
+ host_byte = DID_ABORT;
+ } else {
+ sk = ABORTED_COMMAND;
+ host_byte = DID_OK;
+ }
+
+ scsi_build_sense_buffer(0, scmd->sense_buffer, sk, 0x10, ascq);
+ scmd->result = DRIVER_SENSE << 24 | (host_byte << 16) |
+ SAM_STAT_CHECK_CONDITION;
+}
+
+/**
+ * _scsih_qcmd - main scsi request entry point
* @scmd: pointer to scsi command object
* @done: function pointer to be invoked on completion
*
@@ -2401,7 +2607,7 @@
* SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
*/
static int
-scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+_scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -2470,6 +2676,7 @@
}
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
+ _scsih_setup_eedp(scmd, mpi_request);
mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
if (sas_device_priv_data->sas_target->flags &
MPT_TARGET_FLAGS_RAID_COMPONENT)
@@ -2604,6 +2811,15 @@
case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
desc_ioc_state = "scsi ext terminated";
break;
+ case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+ desc_ioc_state = "eedp guard error";
+ break;
+ case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+ desc_ioc_state = "eedp ref tag error";
+ break;
+ case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+ desc_ioc_state = "eedp app tag error";
+ break;
default:
desc_ioc_state = "unknown";
break;
@@ -2783,7 +2999,7 @@
}
/**
- * scsih_io_done - scsi request callback
+ * _scsih_io_done - scsi request callback
* @ioc: per adapter object
* @smid: system request message index
* @VF_ID: virtual function id
@@ -2794,7 +3010,7 @@
* Return nothing.
*/
static void
-scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
{
Mpi2SCSIIORequest_t *mpi_request;
Mpi2SCSIIOReply_t *mpi_reply;
@@ -2939,6 +3155,11 @@
scmd->result = DID_RESET << 16;
break;
+ case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
+ case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
+ case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
+ _scsih_eedp_error_handling(scmd, ioc_status);
+ break;
case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
case MPI2_IOCSTATUS_INVALID_FUNCTION:
case MPI2_IOCSTATUS_INVALID_SGL:
@@ -5130,18 +5351,19 @@
.module = THIS_MODULE,
.name = "Fusion MPT SAS Host",
.proc_name = MPT2SAS_DRIVER_NAME,
- .queuecommand = scsih_qcmd,
- .target_alloc = scsih_target_alloc,
- .slave_alloc = scsih_slave_alloc,
- .slave_configure = scsih_slave_configure,
- .target_destroy = scsih_target_destroy,
- .slave_destroy = scsih_slave_destroy,
- .change_queue_depth = scsih_change_queue_depth,
- .change_queue_type = scsih_change_queue_type,
- .eh_abort_handler = scsih_abort,
- .eh_device_reset_handler = scsih_dev_reset,
- .eh_host_reset_handler = scsih_host_reset,
- .bios_param = scsih_bios_param,
+ .queuecommand = _scsih_qcmd,
+ .target_alloc = _scsih_target_alloc,
+ .slave_alloc = _scsih_slave_alloc,
+ .slave_configure = _scsih_slave_configure,
+ .target_destroy = _scsih_target_destroy,
+ .slave_destroy = _scsih_slave_destroy,
+ .change_queue_depth = _scsih_change_queue_depth,
+ .change_queue_type = _scsih_change_queue_type,
+ .eh_abort_handler = _scsih_abort,
+ .eh_device_reset_handler = _scsih_dev_reset,
+ .eh_target_reset_handler = _scsih_target_reset,
+ .eh_host_reset_handler = _scsih_host_reset,
+ .bios_param = _scsih_bios_param,
.can_queue = 1,
.this_id = -1,
.sg_tablesize = MPT2SAS_SG_DEPTH,
@@ -5228,13 +5450,13 @@
}
/**
- * scsih_remove - detach and remove add host
+ * _scsih_remove - detach and remove add host
* @pdev: PCI device struct
*
* Return nothing.
*/
static void __devexit
-scsih_remove(struct pci_dev *pdev)
+_scsih_remove(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5442,14 +5664,14 @@
}
/**
- * scsih_probe - attach and add scsi host
+ * _scsih_probe - attach and add scsi host
* @pdev: PCI device struct
* @id: pci device id
*
* Returns 0 success, anything else error.
*/
static int
-scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+_scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct MPT2SAS_ADAPTER *ioc;
struct Scsi_Host *shost;
@@ -5503,6 +5725,9 @@
goto out_add_shost_fail;
}
+ scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
+ | SHOST_DIF_TYPE3_PROTECTION);
+
/* event thread */
snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
"fw_event%d", ioc->id);
@@ -5536,14 +5761,14 @@
#ifdef CONFIG_PM
/**
- * scsih_suspend - power management suspend main entry point
+ * _scsih_suspend - power management suspend main entry point
* @pdev: PCI device struct
* @state: PM state change to (usually PCI_D3)
*
* Returns 0 success, anything else error.
*/
static int
-scsih_suspend(struct pci_dev *pdev, pm_message_t state)
+_scsih_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5564,13 +5789,13 @@
}
/**
- * scsih_resume - power management resume main entry point
+ * _scsih_resume - power management resume main entry point
* @pdev: PCI device struct
*
* Returns 0 success, anything else error.
*/
static int
-scsih_resume(struct pci_dev *pdev)
+_scsih_resume(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -5599,22 +5824,22 @@
static struct pci_driver scsih_driver = {
.name = MPT2SAS_DRIVER_NAME,
.id_table = scsih_pci_table,
- .probe = scsih_probe,
- .remove = __devexit_p(scsih_remove),
+ .probe = _scsih_probe,
+ .remove = __devexit_p(_scsih_remove),
#ifdef CONFIG_PM
- .suspend = scsih_suspend,
- .resume = scsih_resume,
+ .suspend = _scsih_suspend,
+ .resume = _scsih_resume,
#endif
};
/**
- * scsih_init - main entry point for this driver.
+ * _scsih_init - main entry point for this driver.
*
* Returns 0 success, anything else error.
*/
static int __init
-scsih_init(void)
+_scsih_init(void)
{
int error;
@@ -5630,10 +5855,10 @@
mpt2sas_base_initialize_callback_handler();
/* queuecommand callback hander */
- scsi_io_cb_idx = mpt2sas_base_register_callback_handler(scsih_io_done);
+ scsi_io_cb_idx = mpt2sas_base_register_callback_handler(_scsih_io_done);
/* task managment callback handler */
- tm_cb_idx = mpt2sas_base_register_callback_handler(scsih_tm_done);
+ tm_cb_idx = mpt2sas_base_register_callback_handler(_scsih_tm_done);
/* base internal commands callback handler */
base_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_base_done);
@@ -5659,12 +5884,12 @@
}
/**
- * scsih_exit - exit point for this driver (when it is a module).
+ * _scsih_exit - exit point for this driver (when it is a module).
*
* Returns 0 success, anything else error.
*/
static void __exit
-scsih_exit(void)
+_scsih_exit(void)
{
printk(KERN_INFO "mpt2sas version %s unloading\n",
MPT2SAS_DRIVER_VERSION);
@@ -5682,5 +5907,5 @@
mpt2sas_ctl_exit();
}
-module_init(scsih_init);
-module_exit(scsih_exit);
+module_init(_scsih_init);
+module_exit(_scsih_exit);
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index 5c65da5..686695b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -264,7 +264,7 @@
};
/**
- * transport_expander_report_manufacture - obtain SMP report_manufacture
+ * _transport_expander_report_manufacture - obtain SMP report_manufacture
* @ioc: per adapter object
* @sas_address: expander sas address
* @edev: the sas_expander_device object
@@ -274,7 +274,7 @@
* Returns 0 for success, non-zero for failure.
*/
static int
-transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
+_transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
u64 sas_address, struct sas_expander_device *edev)
{
Mpi2SmpPassthroughRequest_t *mpi_request;
@@ -578,7 +578,7 @@
MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
mpt2sas_port->remote_identify.device_type ==
MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER)
- transport_expander_report_manufacture(ioc,
+ _transport_expander_report_manufacture(ioc,
mpt2sas_port->remote_identify.sas_address,
rphy_to_expander_device(rphy));
@@ -852,7 +852,7 @@
}
/**
- * transport_get_linkerrors -
+ * _transport_get_linkerrors -
* @phy: The sas phy object
*
* Only support sas_host direct attached phys.
@@ -860,7 +860,7 @@
*
*/
static int
-transport_get_linkerrors(struct sas_phy *phy)
+_transport_get_linkerrors(struct sas_phy *phy)
{
struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
struct _sas_phy *mpt2sas_phy;
@@ -903,14 +903,14 @@
}
/**
- * transport_get_enclosure_identifier -
+ * _transport_get_enclosure_identifier -
* @phy: The sas phy object
*
* Obtain the enclosure logical id for an expander.
* Returns 0 for success, non-zero for failure.
*/
static int
-transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+_transport_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
{
struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
struct _sas_node *sas_expander;
@@ -929,13 +929,13 @@
}
/**
- * transport_get_bay_identifier -
+ * _transport_get_bay_identifier -
* @phy: The sas phy object
*
* Returns the slot id for a device that resides inside an enclosure.
*/
static int
-transport_get_bay_identifier(struct sas_rphy *rphy)
+_transport_get_bay_identifier(struct sas_rphy *rphy)
{
struct MPT2SAS_ADAPTER *ioc = rphy_to_ioc(rphy);
struct _sas_device *sas_device;
@@ -953,7 +953,7 @@
}
/**
- * transport_phy_reset -
+ * _transport_phy_reset -
* @phy: The sas phy object
* @hard_reset:
*
@@ -961,7 +961,7 @@
* Returns 0 for success, non-zero for failure.
*/
static int
-transport_phy_reset(struct sas_phy *phy, int hard_reset)
+_transport_phy_reset(struct sas_phy *phy, int hard_reset)
{
struct MPT2SAS_ADAPTER *ioc = phy_to_ioc(phy);
struct _sas_phy *mpt2sas_phy;
@@ -1002,7 +1002,7 @@
}
/**
- * transport_smp_handler - transport portal for smp passthru
+ * _transport_smp_handler - transport portal for smp passthru
* @shost: shost object
* @rphy: sas transport rphy object
* @req:
@@ -1012,7 +1012,7 @@
* smp_rep_general /sys/class/bsg/expander-5:0
*/
static int
-transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+_transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
struct request *req)
{
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
@@ -1200,11 +1200,11 @@
}
struct sas_function_template mpt2sas_transport_functions = {
- .get_linkerrors = transport_get_linkerrors,
- .get_enclosure_identifier = transport_get_enclosure_identifier,
- .get_bay_identifier = transport_get_bay_identifier,
- .phy_reset = transport_phy_reset,
- .smp_handler = transport_smp_handler,
+ .get_linkerrors = _transport_get_linkerrors,
+ .get_enclosure_identifier = _transport_get_enclosure_identifier,
+ .get_bay_identifier = _transport_get_bay_identifier,
+ .phy_reset = _transport_phy_reset,
+ .smp_handler = _transport_smp_handler,
};
struct scsi_transport_template *mpt2sas_transport_template;
diff --git a/drivers/scsi/mvsas.c b/drivers/scsi/mvsas.c
deleted file mode 100644
index e4acebd..0000000
--- a/drivers/scsi/mvsas.c
+++ /dev/null
@@ -1,3222 +0,0 @@
-/*
- mvsas.c - Marvell 88SE6440 SAS/SATA support
-
- Copyright 2007 Red Hat, Inc.
- Copyright 2008 Marvell. <kewei@marvell.com>
-
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2,
- or (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty
- of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public
- License along with this program; see the file COPYING. If not,
- write to the Free Software Foundation, 675 Mass Ave, Cambridge,
- MA 02139, USA.
-
- ---------------------------------------------------------------
-
- Random notes:
- * hardware supports controlling the endian-ness of data
- structures. this permits elimination of all the le32_to_cpu()
- and cpu_to_le32() conversions.
-
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/ctype.h>
-#include <scsi/libsas.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/sas_ata.h>
-#include <asm/io.h>
-
-#define DRV_NAME "mvsas"
-#define DRV_VERSION "0.5.2"
-#define _MV_DUMP 0
-#define MVS_DISABLE_NVRAM
-#define MVS_DISABLE_MSI
-
-#define mr32(reg) readl(regs + MVS_##reg)
-#define mw32(reg,val) writel((val), regs + MVS_##reg)
-#define mw32_f(reg,val) do { \
- writel((val), regs + MVS_##reg); \
- readl(regs + MVS_##reg); \
- } while (0)
-
-#define MVS_ID_NOT_MAPPED 0x7f
-#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
-
-/* offset for D2H FIS in the Received FIS List Structure */
-#define SATA_RECEIVED_D2H_FIS(reg_set) \
- ((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x40)
-#define SATA_RECEIVED_PIO_FIS(reg_set) \
- ((void *) mvi->rx_fis + 0x400 + 0x100 * reg_set + 0x20)
-#define UNASSOC_D2H_FIS(id) \
- ((void *) mvi->rx_fis + 0x100 * id)
-
-#define for_each_phy(__lseq_mask, __mc, __lseq, __rest) \
- for ((__mc) = (__lseq_mask), (__lseq) = 0; \
- (__mc) != 0 && __rest; \
- (++__lseq), (__mc) >>= 1)
-
-/* driver compile-time configuration */
-enum driver_configuration {
- MVS_TX_RING_SZ = 1024, /* TX ring size (12-bit) */
- MVS_RX_RING_SZ = 1024, /* RX ring size (12-bit) */
- /* software requires power-of-2
- ring size */
-
- MVS_SLOTS = 512, /* command slots */
- MVS_SLOT_BUF_SZ = 8192, /* cmd tbl + IU + status + PRD */
- MVS_SSP_CMD_SZ = 64, /* SSP command table buffer size */
- MVS_ATA_CMD_SZ = 96, /* SATA command table buffer size */
- MVS_OAF_SZ = 64, /* Open address frame buffer size */
-
- MVS_RX_FIS_COUNT = 17, /* Optional rx'd FISs (max 17) */
-
- MVS_QUEUE_SIZE = 30, /* Support Queue depth */
- MVS_CAN_QUEUE = MVS_SLOTS - 1, /* SCSI Queue depth */
-};
-
-/* unchangeable hardware details */
-enum hardware_details {
- MVS_MAX_PHYS = 8, /* max. possible phys */
- MVS_MAX_PORTS = 8, /* max. possible ports */
- MVS_RX_FISL_SZ = 0x400 + (MVS_RX_FIS_COUNT * 0x100),
-};
-
-/* peripheral registers (BAR2) */
-enum peripheral_registers {
- SPI_CTL = 0x10, /* EEPROM control */
- SPI_CMD = 0x14, /* EEPROM command */
- SPI_DATA = 0x18, /* EEPROM data */
-};
-
-enum peripheral_register_bits {
- TWSI_RDY = (1U << 7), /* EEPROM interface ready */
- TWSI_RD = (1U << 4), /* EEPROM read access */
-
- SPI_ADDR_MASK = 0x3ffff, /* bits 17:0 */
-};
-
-/* enhanced mode registers (BAR4) */
-enum hw_registers {
- MVS_GBL_CTL = 0x04, /* global control */
- MVS_GBL_INT_STAT = 0x08, /* global irq status */
- MVS_GBL_PI = 0x0C, /* ports implemented bitmask */
- MVS_GBL_PORT_TYPE = 0xa0, /* port type */
-
- MVS_CTL = 0x100, /* SAS/SATA port configuration */
- MVS_PCS = 0x104, /* SAS/SATA port control/status */
- MVS_CMD_LIST_LO = 0x108, /* cmd list addr */
- MVS_CMD_LIST_HI = 0x10C,
- MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */
- MVS_RX_FIS_HI = 0x114,
-
- MVS_TX_CFG = 0x120, /* TX configuration */
- MVS_TX_LO = 0x124, /* TX (delivery) ring addr */
- MVS_TX_HI = 0x128,
-
- MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */
- MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */
- MVS_RX_CFG = 0x134, /* RX configuration */
- MVS_RX_LO = 0x138, /* RX (completion) ring addr */
- MVS_RX_HI = 0x13C,
- MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */
-
- MVS_INT_COAL = 0x148, /* Int coalescing config */
- MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */
- MVS_INT_STAT = 0x150, /* Central int status */
- MVS_INT_MASK = 0x154, /* Central int enable */
- MVS_INT_STAT_SRS = 0x158, /* SATA register set status */
- MVS_INT_MASK_SRS = 0x15C,
-
- /* ports 1-3 follow after this */
- MVS_P0_INT_STAT = 0x160, /* port0 interrupt status */
- MVS_P0_INT_MASK = 0x164, /* port0 interrupt mask */
- MVS_P4_INT_STAT = 0x200, /* Port 4 interrupt status */
- MVS_P4_INT_MASK = 0x204, /* Port 4 interrupt enable mask */
-
- /* ports 1-3 follow after this */
- MVS_P0_SER_CTLSTAT = 0x180, /* port0 serial control/status */
- MVS_P4_SER_CTLSTAT = 0x220, /* port4 serial control/status */
-
- MVS_CMD_ADDR = 0x1B8, /* Command register port (addr) */
- MVS_CMD_DATA = 0x1BC, /* Command register port (data) */
-
- /* ports 1-3 follow after this */
- MVS_P0_CFG_ADDR = 0x1C0, /* port0 phy register address */
- MVS_P0_CFG_DATA = 0x1C4, /* port0 phy register data */
- MVS_P4_CFG_ADDR = 0x230, /* Port 4 config address */
- MVS_P4_CFG_DATA = 0x234, /* Port 4 config data */
-
- /* ports 1-3 follow after this */
- MVS_P0_VSR_ADDR = 0x1E0, /* port0 VSR address */
- MVS_P0_VSR_DATA = 0x1E4, /* port0 VSR data */
- MVS_P4_VSR_ADDR = 0x250, /* port 4 VSR addr */
- MVS_P4_VSR_DATA = 0x254, /* port 4 VSR data */
-};
-
-enum hw_register_bits {
- /* MVS_GBL_CTL */
- INT_EN = (1U << 1), /* Global int enable */
- HBA_RST = (1U << 0), /* HBA reset */
-
- /* MVS_GBL_INT_STAT */
- INT_XOR = (1U << 4), /* XOR engine event */
- INT_SAS_SATA = (1U << 0), /* SAS/SATA event */
-
- /* MVS_GBL_PORT_TYPE */ /* shl for ports 1-3 */
- SATA_TARGET = (1U << 16), /* port0 SATA target enable */
- MODE_AUTO_DET_PORT7 = (1U << 15), /* port0 SAS/SATA autodetect */
- MODE_AUTO_DET_PORT6 = (1U << 14),
- MODE_AUTO_DET_PORT5 = (1U << 13),
- MODE_AUTO_DET_PORT4 = (1U << 12),
- MODE_AUTO_DET_PORT3 = (1U << 11),
- MODE_AUTO_DET_PORT2 = (1U << 10),
- MODE_AUTO_DET_PORT1 = (1U << 9),
- MODE_AUTO_DET_PORT0 = (1U << 8),
- MODE_AUTO_DET_EN = MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
- MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
- MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
- MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
- MODE_SAS_PORT7_MASK = (1U << 7), /* port0 SAS(1), SATA(0) mode */
- MODE_SAS_PORT6_MASK = (1U << 6),
- MODE_SAS_PORT5_MASK = (1U << 5),
- MODE_SAS_PORT4_MASK = (1U << 4),
- MODE_SAS_PORT3_MASK = (1U << 3),
- MODE_SAS_PORT2_MASK = (1U << 2),
- MODE_SAS_PORT1_MASK = (1U << 1),
- MODE_SAS_PORT0_MASK = (1U << 0),
- MODE_SAS_SATA = MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
- MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
- MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
- MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
-
- /* SAS_MODE value may be
- * dictated (in hw) by values
- * of SATA_TARGET & AUTO_DET
- */
-
- /* MVS_TX_CFG */
- TX_EN = (1U << 16), /* Enable TX */
- TX_RING_SZ_MASK = 0xfff, /* TX ring size, bits 11:0 */
-
- /* MVS_RX_CFG */
- RX_EN = (1U << 16), /* Enable RX */
- RX_RING_SZ_MASK = 0xfff, /* RX ring size, bits 11:0 */
-
- /* MVS_INT_COAL */
- COAL_EN = (1U << 16), /* Enable int coalescing */
-
- /* MVS_INT_STAT, MVS_INT_MASK */
- CINT_I2C = (1U << 31), /* I2C event */
- CINT_SW0 = (1U << 30), /* software event 0 */
- CINT_SW1 = (1U << 29), /* software event 1 */
- CINT_PRD_BC = (1U << 28), /* PRD BC err for read cmd */
- CINT_DMA_PCIE = (1U << 27), /* DMA to PCIE timeout */
- CINT_MEM = (1U << 26), /* int mem parity err */
- CINT_I2C_SLAVE = (1U << 25), /* slave I2C event */
- CINT_SRS = (1U << 3), /* SRS event */
- CINT_CI_STOP = (1U << 1), /* cmd issue stopped */
- CINT_DONE = (1U << 0), /* cmd completion */
-
- /* shl for ports 1-3 */
- CINT_PORT_STOPPED = (1U << 16), /* port0 stopped */
- CINT_PORT = (1U << 8), /* port0 event */
- CINT_PORT_MASK_OFFSET = 8,
- CINT_PORT_MASK = (0xFF << CINT_PORT_MASK_OFFSET),
-
- /* TX (delivery) ring bits */
- TXQ_CMD_SHIFT = 29,
- TXQ_CMD_SSP = 1, /* SSP protocol */
- TXQ_CMD_SMP = 2, /* SMP protocol */
- TXQ_CMD_STP = 3, /* STP/SATA protocol */
- TXQ_CMD_SSP_FREE_LIST = 4, /* add to SSP targ free list */
- TXQ_CMD_SLOT_RESET = 7, /* reset command slot */
- TXQ_MODE_I = (1U << 28), /* mode: 0=target,1=initiator */
- TXQ_PRIO_HI = (1U << 27), /* priority: 0=normal, 1=high */
- TXQ_SRS_SHIFT = 20, /* SATA register set */
- TXQ_SRS_MASK = 0x7f,
- TXQ_PHY_SHIFT = 12, /* PHY bitmap */
- TXQ_PHY_MASK = 0xff,
- TXQ_SLOT_MASK = 0xfff, /* slot number */
-
- /* RX (completion) ring bits */
- RXQ_GOOD = (1U << 23), /* Response good */
- RXQ_SLOT_RESET = (1U << 21), /* Slot reset complete */
- RXQ_CMD_RX = (1U << 20), /* target cmd received */
- RXQ_ATTN = (1U << 19), /* attention */
- RXQ_RSP = (1U << 18), /* response frame xfer'd */
- RXQ_ERR = (1U << 17), /* err info rec xfer'd */
- RXQ_DONE = (1U << 16), /* cmd complete */
- RXQ_SLOT_MASK = 0xfff, /* slot number */
-
- /* mvs_cmd_hdr bits */
- MCH_PRD_LEN_SHIFT = 16, /* 16-bit PRD table len */
- MCH_SSP_FR_TYPE_SHIFT = 13, /* SSP frame type */
-
- /* SSP initiator only */
- MCH_SSP_FR_CMD = 0x0, /* COMMAND frame */
-
- /* SSP initiator or target */
- MCH_SSP_FR_TASK = 0x1, /* TASK frame */
-
- /* SSP target only */
- MCH_SSP_FR_XFER_RDY = 0x4, /* XFER_RDY frame */
- MCH_SSP_FR_RESP = 0x5, /* RESPONSE frame */
- MCH_SSP_FR_READ = 0x6, /* Read DATA frame(s) */
- MCH_SSP_FR_READ_RESP = 0x7, /* ditto, plus RESPONSE */
-
- MCH_PASSTHRU = (1U << 12), /* pass-through (SSP) */
- MCH_FBURST = (1U << 11), /* first burst (SSP) */
- MCH_CHK_LEN = (1U << 10), /* chk xfer len (SSP) */
- MCH_RETRY = (1U << 9), /* tport layer retry (SSP) */
- MCH_PROTECTION = (1U << 8), /* protection info rec (SSP) */
- MCH_RESET = (1U << 7), /* Reset (STP/SATA) */
- MCH_FPDMA = (1U << 6), /* First party DMA (STP/SATA) */
- MCH_ATAPI = (1U << 5), /* ATAPI (STP/SATA) */
- MCH_BIST = (1U << 4), /* BIST activate (STP/SATA) */
- MCH_PMP_MASK = 0xf, /* PMP from cmd FIS (STP/SATA)*/
-
- CCTL_RST = (1U << 5), /* port logic reset */
-
- /* 0(LSB first), 1(MSB first) */
- CCTL_ENDIAN_DATA = (1U << 3), /* PRD data */
- CCTL_ENDIAN_RSP = (1U << 2), /* response frame */
- CCTL_ENDIAN_OPEN = (1U << 1), /* open address frame */
- CCTL_ENDIAN_CMD = (1U << 0), /* command table */
-
- /* MVS_Px_SER_CTLSTAT (per-phy control) */
- PHY_SSP_RST = (1U << 3), /* reset SSP link layer */
- PHY_BCAST_CHG = (1U << 2), /* broadcast(change) notif */
- PHY_RST_HARD = (1U << 1), /* hard reset + phy reset */
- PHY_RST = (1U << 0), /* phy reset */
- PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
- PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
- PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
- PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
- (0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
- PHY_READY_MASK = (1U << 20),
-
- /* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
- PHYEV_DEC_ERR = (1U << 24), /* Phy Decoding Error */
- PHYEV_UNASSOC_FIS = (1U << 19), /* unassociated FIS rx'd */
- PHYEV_AN = (1U << 18), /* SATA async notification */
- PHYEV_BIST_ACT = (1U << 17), /* BIST activate FIS */
- PHYEV_SIG_FIS = (1U << 16), /* signature FIS */
- PHYEV_POOF = (1U << 12), /* phy ready from 1 -> 0 */
- PHYEV_IU_BIG = (1U << 11), /* IU too long err */
- PHYEV_IU_SMALL = (1U << 10), /* IU too short err */
- PHYEV_UNK_TAG = (1U << 9), /* unknown tag */
- PHYEV_BROAD_CH = (1U << 8), /* broadcast(CHANGE) */
- PHYEV_COMWAKE = (1U << 7), /* COMWAKE rx'd */
- PHYEV_PORT_SEL = (1U << 6), /* port selector present */
- PHYEV_HARD_RST = (1U << 5), /* hard reset rx'd */
- PHYEV_ID_TMOUT = (1U << 4), /* identify timeout */
- PHYEV_ID_FAIL = (1U << 3), /* identify failed */
- PHYEV_ID_DONE = (1U << 2), /* identify done */
- PHYEV_HARD_RST_DONE = (1U << 1), /* hard reset done */
- PHYEV_RDY_CH = (1U << 0), /* phy ready changed state */
-
- /* MVS_PCS */
- PCS_EN_SATA_REG_SHIFT = (16), /* Enable SATA Register Set */
- PCS_EN_PORT_XMT_SHIFT = (12), /* Enable Port Transmit */
- PCS_EN_PORT_XMT_SHIFT2 = (8), /* For 6480 */
- PCS_SATA_RETRY = (1U << 8), /* retry ctl FIS on R_ERR */
- PCS_RSP_RX_EN = (1U << 7), /* raw response rx */
- PCS_SELF_CLEAR = (1U << 5), /* self-clearing int mode */
- PCS_FIS_RX_EN = (1U << 4), /* FIS rx enable */
- PCS_CMD_STOP_ERR = (1U << 3), /* cmd stop-on-err enable */
- PCS_CMD_RST = (1U << 1), /* reset cmd issue */
- PCS_CMD_EN = (1U << 0), /* enable cmd issue */
-
- /* Port n Attached Device Info */
- PORT_DEV_SSP_TRGT = (1U << 19),
- PORT_DEV_SMP_TRGT = (1U << 18),
- PORT_DEV_STP_TRGT = (1U << 17),
- PORT_DEV_SSP_INIT = (1U << 11),
- PORT_DEV_SMP_INIT = (1U << 10),
- PORT_DEV_STP_INIT = (1U << 9),
- PORT_PHY_ID_MASK = (0xFFU << 24),
- PORT_DEV_TRGT_MASK = (0x7U << 17),
- PORT_DEV_INIT_MASK = (0x7U << 9),
- PORT_DEV_TYPE_MASK = (0x7U << 0),
-
- /* Port n PHY Status */
- PHY_RDY = (1U << 2),
- PHY_DW_SYNC = (1U << 1),
- PHY_OOB_DTCTD = (1U << 0),
-
- /* VSR */
- /* PHYMODE 6 (CDB) */
- PHY_MODE6_LATECLK = (1U << 29), /* Lock Clock */
- PHY_MODE6_DTL_SPEED = (1U << 27), /* Digital Loop Speed */
- PHY_MODE6_FC_ORDER = (1U << 26), /* Fibre Channel Mode Order*/
- PHY_MODE6_MUCNT_EN = (1U << 24), /* u Count Enable */
- PHY_MODE6_SEL_MUCNT_LEN = (1U << 22), /* Training Length Select */
- PHY_MODE6_SELMUPI = (1U << 20), /* Phase Multi Select (init) */
- PHY_MODE6_SELMUPF = (1U << 18), /* Phase Multi Select (final) */
- PHY_MODE6_SELMUFF = (1U << 16), /* Freq Loop Multi Sel(final) */
- PHY_MODE6_SELMUFI = (1U << 14), /* Freq Loop Multi Sel(init) */
- PHY_MODE6_FREEZE_LOOP = (1U << 12), /* Freeze Rx CDR Loop */
- PHY_MODE6_INT_RXFOFFS = (1U << 3), /* Rx CDR Freq Loop Enable */
- PHY_MODE6_FRC_RXFOFFS = (1U << 2), /* Initial Rx CDR Offset */
- PHY_MODE6_STAU_0D8 = (1U << 1), /* Rx CDR Freq Loop Saturate */
- PHY_MODE6_RXSAT_DIS = (1U << 0), /* Saturate Ctl */
-};
-
-enum mvs_info_flags {
- MVF_MSI = (1U << 0), /* MSI is enabled */
- MVF_PHY_PWR_FIX = (1U << 1), /* bug workaround */
-};
-
-enum sas_cmd_port_registers {
- CMD_CMRST_OOB_DET = 0x100, /* COMRESET OOB detect register */
- CMD_CMWK_OOB_DET = 0x104, /* COMWAKE OOB detect register */
- CMD_CMSAS_OOB_DET = 0x108, /* COMSAS OOB detect register */
- CMD_BRST_OOB_DET = 0x10c, /* burst OOB detect register */
- CMD_OOB_SPACE = 0x110, /* OOB space control register */
- CMD_OOB_BURST = 0x114, /* OOB burst control register */
- CMD_PHY_TIMER = 0x118, /* PHY timer control register */
- CMD_PHY_CONFIG0 = 0x11c, /* PHY config register 0 */
- CMD_PHY_CONFIG1 = 0x120, /* PHY config register 1 */
- CMD_SAS_CTL0 = 0x124, /* SAS control register 0 */
- CMD_SAS_CTL1 = 0x128, /* SAS control register 1 */
- CMD_SAS_CTL2 = 0x12c, /* SAS control register 2 */
- CMD_SAS_CTL3 = 0x130, /* SAS control register 3 */
- CMD_ID_TEST = 0x134, /* ID test register */
- CMD_PL_TIMER = 0x138, /* PL timer register */
- CMD_WD_TIMER = 0x13c, /* WD timer register */
- CMD_PORT_SEL_COUNT = 0x140, /* port selector count register */
- CMD_APP_MEM_CTL = 0x144, /* Application Memory Control */
- CMD_XOR_MEM_CTL = 0x148, /* XOR Block Memory Control */
- CMD_DMA_MEM_CTL = 0x14c, /* DMA Block Memory Control */
- CMD_PORT_MEM_CTL0 = 0x150, /* Port Memory Control 0 */
- CMD_PORT_MEM_CTL1 = 0x154, /* Port Memory Control 1 */
- CMD_SATA_PORT_MEM_CTL0 = 0x158, /* SATA Port Memory Control 0 */
- CMD_SATA_PORT_MEM_CTL1 = 0x15c, /* SATA Port Memory Control 1 */
- CMD_XOR_MEM_BIST_CTL = 0x160, /* XOR Memory BIST Control */
- CMD_XOR_MEM_BIST_STAT = 0x164, /* XOR Memroy BIST Status */
- CMD_DMA_MEM_BIST_CTL = 0x168, /* DMA Memory BIST Control */
- CMD_DMA_MEM_BIST_STAT = 0x16c, /* DMA Memory BIST Status */
- CMD_PORT_MEM_BIST_CTL = 0x170, /* Port Memory BIST Control */
- CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
- CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
- CMD_STP_MEM_BIST_CTL = 0x17c, /* STP Memory BIST Control */
- CMD_STP_MEM_BIST_STAT0 = 0x180, /* STP Memory BIST Status 0 */
- CMD_STP_MEM_BIST_STAT1 = 0x184, /* STP Memory BIST Status 1 */
- CMD_RESET_COUNT = 0x188, /* Reset Count */
- CMD_MONTR_DATA_SEL = 0x18C, /* Monitor Data/Select */
- CMD_PLL_PHY_CONFIG = 0x190, /* PLL/PHY Configuration */
- CMD_PHY_CTL = 0x194, /* PHY Control and Status */
- CMD_PHY_TEST_COUNT0 = 0x198, /* Phy Test Count 0 */
- CMD_PHY_TEST_COUNT1 = 0x19C, /* Phy Test Count 1 */
- CMD_PHY_TEST_COUNT2 = 0x1A0, /* Phy Test Count 2 */
- CMD_APP_ERR_CONFIG = 0x1A4, /* Application Error Configuration */
- CMD_PND_FIFO_CTL0 = 0x1A8, /* Pending FIFO Control 0 */
- CMD_HOST_CTL = 0x1AC, /* Host Control Status */
- CMD_HOST_WR_DATA = 0x1B0, /* Host Write Data */
- CMD_HOST_RD_DATA = 0x1B4, /* Host Read Data */
- CMD_PHY_MODE_21 = 0x1B8, /* Phy Mode 21 */
- CMD_SL_MODE0 = 0x1BC, /* SL Mode 0 */
- CMD_SL_MODE1 = 0x1C0, /* SL Mode 1 */
- CMD_PND_FIFO_CTL1 = 0x1C4, /* Pending FIFO Control 1 */
-};
-
-/* SAS/SATA configuration port registers, aka phy registers */
-enum sas_sata_config_port_regs {
- PHYR_IDENTIFY = 0x00, /* info for IDENTIFY frame */
- PHYR_ADDR_LO = 0x04, /* my SAS address (low) */
- PHYR_ADDR_HI = 0x08, /* my SAS address (high) */
- PHYR_ATT_DEV_INFO = 0x0C, /* attached device info */
- PHYR_ATT_ADDR_LO = 0x10, /* attached dev SAS addr (low) */
- PHYR_ATT_ADDR_HI = 0x14, /* attached dev SAS addr (high) */
- PHYR_SATA_CTL = 0x18, /* SATA control */
- PHYR_PHY_STAT = 0x1C, /* PHY status */
- PHYR_SATA_SIG0 = 0x20, /*port SATA signature FIS(Byte 0-3) */
- PHYR_SATA_SIG1 = 0x24, /*port SATA signature FIS(Byte 4-7) */
- PHYR_SATA_SIG2 = 0x28, /*port SATA signature FIS(Byte 8-11) */
- PHYR_SATA_SIG3 = 0x2c, /*port SATA signature FIS(Byte 12-15) */
- PHYR_R_ERR_COUNT = 0x30, /* port R_ERR count register */
- PHYR_CRC_ERR_COUNT = 0x34, /* port CRC error count register */
- PHYR_WIDE_PORT = 0x38, /* wide port participating */
- PHYR_CURRENT0 = 0x80, /* current connection info 0 */
- PHYR_CURRENT1 = 0x84, /* current connection info 1 */
- PHYR_CURRENT2 = 0x88, /* current connection info 2 */
-};
-
-/* SAS/SATA Vendor Specific Port Registers */
-enum sas_sata_vsp_regs {
- VSR_PHY_STAT = 0x00, /* Phy Status */
- VSR_PHY_MODE1 = 0x01, /* phy tx */
- VSR_PHY_MODE2 = 0x02, /* tx scc */
- VSR_PHY_MODE3 = 0x03, /* pll */
- VSR_PHY_MODE4 = 0x04, /* VCO */
- VSR_PHY_MODE5 = 0x05, /* Rx */
- VSR_PHY_MODE6 = 0x06, /* CDR */
- VSR_PHY_MODE7 = 0x07, /* Impedance */
- VSR_PHY_MODE8 = 0x08, /* Voltage */
- VSR_PHY_MODE9 = 0x09, /* Test */
- VSR_PHY_MODE10 = 0x0A, /* Power */
- VSR_PHY_MODE11 = 0x0B, /* Phy Mode */
- VSR_PHY_VS0 = 0x0C, /* Vednor Specific 0 */
- VSR_PHY_VS1 = 0x0D, /* Vednor Specific 1 */
-};
-
-enum pci_cfg_registers {
- PCR_PHY_CTL = 0x40,
- PCR_PHY_CTL2 = 0x90,
- PCR_DEV_CTRL = 0xE8,
-};
-
-enum pci_cfg_register_bits {
- PCTL_PWR_ON = (0xFU << 24),
- PCTL_OFF = (0xFU << 12),
- PRD_REQ_SIZE = (0x4000),
- PRD_REQ_MASK = (0x00007000),
-};
-
-enum nvram_layout_offsets {
- NVR_SIG = 0x00, /* 0xAA, 0x55 */
- NVR_SAS_ADDR = 0x02, /* 8-byte SAS address */
-};
-
-enum chip_flavors {
- chip_6320,
- chip_6440,
- chip_6480,
-};
-
-enum port_type {
- PORT_TYPE_SAS = (1L << 1),
- PORT_TYPE_SATA = (1L << 0),
-};
-
-/* Command Table Format */
-enum ct_format {
- /* SSP */
- SSP_F_H = 0x00,
- SSP_F_IU = 0x18,
- SSP_F_MAX = 0x4D,
- /* STP */
- STP_CMD_FIS = 0x00,
- STP_ATAPI_CMD = 0x40,
- STP_F_MAX = 0x10,
- /* SMP */
- SMP_F_T = 0x00,
- SMP_F_DEP = 0x01,
- SMP_F_MAX = 0x101,
-};
-
-enum status_buffer {
- SB_EIR_OFF = 0x00, /* Error Information Record */
- SB_RFB_OFF = 0x08, /* Response Frame Buffer */
- SB_RFB_MAX = 0x400, /* RFB size*/
-};
-
-enum error_info_rec {
- CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
- CMD_PI_ERR = (1U << 30), /* Protection info error. see flags2 */
- RSP_OVER = (1U << 29), /* rsp buffer overflow */
- RETRY_LIM = (1U << 28), /* FIS/frame retry limit exceeded */
- UNK_FIS = (1U << 27), /* unknown FIS */
- DMA_TERM = (1U << 26), /* DMA terminate primitive rx'd */
- SYNC_ERR = (1U << 25), /* SYNC rx'd during frame xmit */
- TFILE_ERR = (1U << 24), /* SATA taskfile Error bit set */
- R_ERR = (1U << 23), /* SATA returned R_ERR prim */
- RD_OFS = (1U << 20), /* Read DATA frame invalid offset */
- XFER_RDY_OFS = (1U << 19), /* XFER_RDY offset error */
- UNEXP_XFER_RDY = (1U << 18), /* unexpected XFER_RDY error */
- DATA_OVER_UNDER = (1U << 16), /* data overflow/underflow */
- INTERLOCK = (1U << 15), /* interlock error */
- NAK = (1U << 14), /* NAK rx'd */
- ACK_NAK_TO = (1U << 13), /* ACK/NAK timeout */
- CXN_CLOSED = (1U << 12), /* cxn closed w/out ack/nak */
- OPEN_TO = (1U << 11), /* I_T nexus lost, open cxn timeout */
- PATH_BLOCKED = (1U << 10), /* I_T nexus lost, pathway blocked */
- NO_DEST = (1U << 9), /* I_T nexus lost, no destination */
- STP_RES_BSY = (1U << 8), /* STP resources busy */
- BREAK = (1U << 7), /* break received */
- BAD_DEST = (1U << 6), /* bad destination */
- BAD_PROTO = (1U << 5), /* protocol not supported */
- BAD_RATE = (1U << 4), /* cxn rate not supported */
- WRONG_DEST = (1U << 3), /* wrong destination error */
- CREDIT_TO = (1U << 2), /* credit timeout */
- WDOG_TO = (1U << 1), /* watchdog timeout */
- BUF_PAR = (1U << 0), /* buffer parity error */
-};
-
-enum error_info_rec_2 {
- SLOT_BSY_ERR = (1U << 31), /* Slot Busy Error */
- GRD_CHK_ERR = (1U << 14), /* Guard Check Error */
- APP_CHK_ERR = (1U << 13), /* Application Check error */
- REF_CHK_ERR = (1U << 12), /* Reference Check Error */
- USR_BLK_NM = (1U << 0), /* User Block Number */
-};
-
-struct mvs_chip_info {
- u32 n_phy;
- u32 srs_sz;
- u32 slot_width;
-};
-
-struct mvs_err_info {
- __le32 flags;
- __le32 flags2;
-};
-
-struct mvs_prd {
- __le64 addr; /* 64-bit buffer address */
- __le32 reserved;
- __le32 len; /* 16-bit length */
-};
-
-struct mvs_cmd_hdr {
- __le32 flags; /* PRD tbl len; SAS, SATA ctl */
- __le32 lens; /* cmd, max resp frame len */
- __le32 tags; /* targ port xfer tag; tag */
- __le32 data_len; /* data xfer len */
- __le64 cmd_tbl; /* command table address */
- __le64 open_frame; /* open addr frame address */
- __le64 status_buf; /* status buffer address */
- __le64 prd_tbl; /* PRD tbl address */
- __le32 reserved[4];
-};
-
-struct mvs_port {
- struct asd_sas_port sas_port;
- u8 port_attached;
- u8 taskfileset;
- u8 wide_port_phymap;
- struct list_head list;
-};
-
-struct mvs_phy {
- struct mvs_port *port;
- struct asd_sas_phy sas_phy;
- struct sas_identify identify;
- struct scsi_device *sdev;
- u64 dev_sas_addr;
- u64 att_dev_sas_addr;
- u32 att_dev_info;
- u32 dev_info;
- u32 phy_type;
- u32 phy_status;
- u32 irq_status;
- u32 frame_rcvd_size;
- u8 frame_rcvd[32];
- u8 phy_attached;
- enum sas_linkrate minimum_linkrate;
- enum sas_linkrate maximum_linkrate;
-};
-
-struct mvs_slot_info {
- struct list_head list;
- struct sas_task *task;
- u32 n_elem;
- u32 tx;
-
- /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
- * and PRD table
- */
- void *buf;
- dma_addr_t buf_dma;
-#if _MV_DUMP
- u32 cmd_size;
-#endif
-
- void *response;
- struct mvs_port *port;
-};
-
-struct mvs_info {
- unsigned long flags;
-
- spinlock_t lock; /* host-wide lock */
- struct pci_dev *pdev; /* our device */
- void __iomem *regs; /* enhanced mode registers */
- void __iomem *peri_regs; /* peripheral registers */
-
- u8 sas_addr[SAS_ADDR_SIZE];
- struct sas_ha_struct sas; /* SCSI/SAS glue */
- struct Scsi_Host *shost;
-
- __le32 *tx; /* TX (delivery) DMA ring */
- dma_addr_t tx_dma;
- u32 tx_prod; /* cached next-producer idx */
-
- __le32 *rx; /* RX (completion) DMA ring */
- dma_addr_t rx_dma;
- u32 rx_cons; /* RX consumer idx */
-
- __le32 *rx_fis; /* RX'd FIS area */
- dma_addr_t rx_fis_dma;
-
- struct mvs_cmd_hdr *slot; /* DMA command header slots */
- dma_addr_t slot_dma;
-
- const struct mvs_chip_info *chip;
-
- u8 tags[MVS_SLOTS];
- struct mvs_slot_info slot_info[MVS_SLOTS];
- /* further per-slot information */
- struct mvs_phy phy[MVS_MAX_PHYS];
- struct mvs_port port[MVS_MAX_PHYS];
-#ifdef MVS_USE_TASKLET
- struct tasklet_struct tasklet;
-#endif
-};
-
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
- void *funcdata);
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port);
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port);
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val);
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val);
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port);
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i);
-static void mvs_detect_porttype(struct mvs_info *mvi, int i);
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
-static void mvs_release_task(struct mvs_info *mvi, int phy_no);
-
-static int mvs_scan_finished(struct Scsi_Host *, unsigned long);
-static void mvs_scan_start(struct Scsi_Host *);
-static int mvs_slave_configure(struct scsi_device *sdev);
-
-static struct scsi_transport_template *mvs_stt;
-
-static const struct mvs_chip_info mvs_chips[] = {
- [chip_6320] = { 2, 16, 9 },
- [chip_6440] = { 4, 16, 9 },
- [chip_6480] = { 8, 32, 10 },
-};
-
-static struct scsi_host_template mvs_sht = {
- .module = THIS_MODULE,
- .name = DRV_NAME,
- .queuecommand = sas_queuecommand,
- .target_alloc = sas_target_alloc,
- .slave_configure = mvs_slave_configure,
- .slave_destroy = sas_slave_destroy,
- .scan_finished = mvs_scan_finished,
- .scan_start = mvs_scan_start,
- .change_queue_depth = sas_change_queue_depth,
- .change_queue_type = sas_change_queue_type,
- .bios_param = sas_bios_param,
- .can_queue = 1,
- .cmd_per_lun = 1,
- .this_id = -1,
- .sg_tablesize = SG_ALL,
- .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
- .use_clustering = ENABLE_CLUSTERING,
- .eh_device_reset_handler = sas_eh_device_reset_handler,
- .eh_bus_reset_handler = sas_eh_bus_reset_handler,
- .slave_alloc = sas_slave_alloc,
- .target_destroy = sas_target_destroy,
- .ioctl = sas_ioctl,
-};
-
-static void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
-{
- u32 i;
- u32 run;
- u32 offset;
-
- offset = 0;
- while (size) {
- printk("%08X : ", baseaddr + offset);
- if (size >= 16)
- run = 16;
- else
- run = size;
- size -= run;
- for (i = 0; i < 16; i++) {
- if (i < run)
- printk("%02X ", (u32)data[i]);
- else
- printk(" ");
- }
- printk(": ");
- for (i = 0; i < run; i++)
- printk("%c", isalnum(data[i]) ? data[i] : '.');
- printk("\n");
- data = &data[16];
- offset += run;
- }
- printk("\n");
-}
-
-#if _MV_DUMP
-static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
- enum sas_protocol proto)
-{
- u32 offset;
- struct pci_dev *pdev = mvi->pdev;
- struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
- offset = slot->cmd_size + MVS_OAF_SZ +
- sizeof(struct mvs_prd) * slot->n_elem;
- dev_printk(KERN_DEBUG, &pdev->dev, "+---->Status buffer[%d] :\n",
- tag);
- mvs_hexdump(32, (u8 *) slot->response,
- (u32) slot->buf_dma + offset);
-}
-#endif
-
-static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
- enum sas_protocol proto)
-{
-#if _MV_DUMP
- u32 sz, w_ptr;
- u64 addr;
- void __iomem *regs = mvi->regs;
- struct pci_dev *pdev = mvi->pdev;
- struct mvs_slot_info *slot = &mvi->slot_info[tag];
-
- /*Delivery Queue */
- sz = mr32(TX_CFG) & TX_RING_SZ_MASK;
- w_ptr = slot->tx;
- addr = mr32(TX_HI) << 16 << 16 | mr32(TX_LO);
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Delivery Queue Base Address=0x%llX (PA)"
- "(tx_dma=0x%llX), Entry=%04d\n",
- addr, mvi->tx_dma, w_ptr);
- mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
- (u32) mvi->tx_dma + sizeof(u32) * w_ptr);
- /*Command List */
- addr = mvi->slot_dma;
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Command List Base Address=0x%llX (PA)"
- "(slot_dma=0x%llX), Header=%03d\n",
- addr, slot->buf_dma, tag);
- dev_printk(KERN_DEBUG, &pdev->dev, "Command Header[%03d]:\n", tag);
- /*mvs_cmd_hdr */
- mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
- (u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
- /*1.command table area */
- dev_printk(KERN_DEBUG, &pdev->dev, "+---->Command Table :\n");
- mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
- /*2.open address frame area */
- dev_printk(KERN_DEBUG, &pdev->dev, "+---->Open Address Frame :\n");
- mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
- (u32) slot->buf_dma + slot->cmd_size);
- /*3.status buffer */
- mvs_hba_sb_dump(mvi, tag, proto);
- /*4.PRD table */
- dev_printk(KERN_DEBUG, &pdev->dev, "+---->PRD table :\n");
- mvs_hexdump(sizeof(struct mvs_prd) * slot->n_elem,
- (u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
- (u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
-#endif
-}
-
-static void mvs_hba_cq_dump(struct mvs_info *mvi)
-{
-#if (_MV_DUMP > 2)
- u64 addr;
- void __iomem *regs = mvi->regs;
- struct pci_dev *pdev = mvi->pdev;
- u32 entry = mvi->rx_cons + 1;
- u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
-
- /*Completion Queue */
- addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
- dev_printk(KERN_DEBUG, &pdev->dev, "Completion Task = 0x%p\n",
- mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Completion List Base Address=0x%llX (PA), "
- "CQ_Entry=%04d, CQ_WP=0x%08X\n",
- addr, entry - 1, mvi->rx[0]);
- mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
- mvi->rx_dma + sizeof(u32) * entry);
-#endif
-}
-
-static void mvs_hba_interrupt_enable(struct mvs_info *mvi)
-{
- void __iomem *regs = mvi->regs;
- u32 tmp;
-
- tmp = mr32(GBL_CTL);
-
- mw32(GBL_CTL, tmp | INT_EN);
-}
-
-static void mvs_hba_interrupt_disable(struct mvs_info *mvi)
-{
- void __iomem *regs = mvi->regs;
- u32 tmp;
-
- tmp = mr32(GBL_CTL);
-
- mw32(GBL_CTL, tmp & ~INT_EN);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
-
-/* move to PCI layer or libata core? */
-static int pci_go_64(struct pci_dev *pdev)
-{
- int rc;
-
- if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (rc) {
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "64-bit DMA enable failed\n");
- return rc;
- }
- }
- } else {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit DMA enable failed\n");
- return rc;
- }
- rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (rc) {
- dev_printk(KERN_ERR, &pdev->dev,
- "32-bit consistent DMA enable failed\n");
- return rc;
- }
- }
-
- return rc;
-}
-
-static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
-{
- if (task->lldd_task) {
- struct mvs_slot_info *slot;
- slot = (struct mvs_slot_info *) task->lldd_task;
- *tag = slot - mvi->slot_info;
- return 1;
- }
- return 0;
-}
-
-static void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
-{
- void *bitmap = (void *) &mvi->tags;
- clear_bit(tag, bitmap);
-}
-
-static void mvs_tag_free(struct mvs_info *mvi, u32 tag)
-{
- mvs_tag_clear(mvi, tag);
-}
-
-static void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
-{
- void *bitmap = (void *) &mvi->tags;
- set_bit(tag, bitmap);
-}
-
-static int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
-{
- unsigned int index, tag;
- void *bitmap = (void *) &mvi->tags;
-
- index = find_first_zero_bit(bitmap, MVS_SLOTS);
- tag = index;
- if (tag >= MVS_SLOTS)
- return -SAS_QUEUE_FULL;
- mvs_tag_set(mvi, tag);
- *tag_out = tag;
- return 0;
-}
-
-static void mvs_tag_init(struct mvs_info *mvi)
-{
- int i;
- for (i = 0; i < MVS_SLOTS; ++i)
- mvs_tag_clear(mvi, i);
-}
-
-#ifndef MVS_DISABLE_NVRAM
-static int mvs_eep_read(void __iomem *regs, u32 addr, u32 *data)
-{
- int timeout = 1000;
-
- if (addr & ~SPI_ADDR_MASK)
- return -EINVAL;
-
- writel(addr, regs + SPI_CMD);
- writel(TWSI_RD, regs + SPI_CTL);
-
- while (timeout-- > 0) {
- if (readl(regs + SPI_CTL) & TWSI_RDY) {
- *data = readl(regs + SPI_DATA);
- return 0;
- }
-
- udelay(10);
- }
-
- return -EBUSY;
-}
-
-static int mvs_eep_read_buf(void __iomem *regs, u32 addr,
- void *buf, u32 buflen)
-{
- u32 addr_end, tmp_addr, i, j;
- u32 tmp = 0;
- int rc;
- u8 *tmp8, *buf8 = buf;
-
- addr_end = addr + buflen;
- tmp_addr = ALIGN(addr, 4);
- if (addr > 0xff)
- return -EINVAL;
-
- j = addr & 0x3;
- if (j) {
- rc = mvs_eep_read(regs, tmp_addr, &tmp);
- if (rc)
- return rc;
-
- tmp8 = (u8 *)&tmp;
- for (i = j; i < 4; i++)
- *buf8++ = tmp8[i];
-
- tmp_addr += 4;
- }
-
- for (j = ALIGN(addr_end, 4); tmp_addr < j; tmp_addr += 4) {
- rc = mvs_eep_read(regs, tmp_addr, &tmp);
- if (rc)
- return rc;
-
- memcpy(buf8, &tmp, 4);
- buf8 += 4;
- }
-
- if (tmp_addr < addr_end) {
- rc = mvs_eep_read(regs, tmp_addr, &tmp);
- if (rc)
- return rc;
-
- tmp8 = (u8 *)&tmp;
- j = addr_end - tmp_addr;
- for (i = 0; i < j; i++)
- *buf8++ = tmp8[i];
-
- tmp_addr += 4;
- }
-
- return 0;
-}
-#endif
-
-static int mvs_nvram_read(struct mvs_info *mvi, u32 addr,
- void *buf, u32 buflen)
-{
-#ifndef MVS_DISABLE_NVRAM
- void __iomem *regs = mvi->regs;
- int rc, i;
- u32 sum;
- u8 hdr[2], *tmp;
- const char *msg;
-
- rc = mvs_eep_read_buf(regs, addr, &hdr, 2);
- if (rc) {
- msg = "nvram hdr read failed";
- goto err_out;
- }
- rc = mvs_eep_read_buf(regs, addr + 2, buf, buflen);
- if (rc) {
- msg = "nvram read failed";
- goto err_out;
- }
-
- if (hdr[0] != 0x5A) {
- /* entry id */
- msg = "invalid nvram entry id";
- rc = -ENOENT;
- goto err_out;
- }
-
- tmp = buf;
- sum = ((u32)hdr[0]) + ((u32)hdr[1]);
- for (i = 0; i < buflen; i++)
- sum += ((u32)tmp[i]);
-
- if (sum) {
- msg = "nvram checksum failure";
- rc = -EILSEQ;
- goto err_out;
- }
-
- return 0;
-
-err_out:
- dev_printk(KERN_ERR, &mvi->pdev->dev, "%s", msg);
- return rc;
-#else
- /* FIXME , For SAS target mode */
- memcpy(buf, "\x50\x05\x04\x30\x11\xab\x00\x00", 8);
- return 0;
-#endif
-}
-
-static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
-{
- struct mvs_phy *phy = &mvi->phy[i];
- struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
- if (!phy->phy_attached)
- return;
-
- if (sas_phy->phy) {
- struct sas_phy *sphy = sas_phy->phy;
-
- sphy->negotiated_linkrate = sas_phy->linkrate;
- sphy->minimum_linkrate = phy->minimum_linkrate;
- sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
- sphy->maximum_linkrate = phy->maximum_linkrate;
- sphy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
- }
-
- if (phy->phy_type & PORT_TYPE_SAS) {
- struct sas_identify_frame *id;
-
- id = (struct sas_identify_frame *)phy->frame_rcvd;
- id->dev_type = phy->identify.device_type;
- id->initiator_bits = SAS_PROTOCOL_ALL;
- id->target_bits = phy->identify.target_port_protocols;
- } else if (phy->phy_type & PORT_TYPE_SATA) {
- /* TODO */
- }
- mvi->sas.sas_phy[i]->frame_rcvd_size = phy->frame_rcvd_size;
- mvi->sas.notify_port_event(mvi->sas.sas_phy[i],
- PORTE_BYTES_DMAED);
-}
-
-static int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
-{
- /* give the phy enabling interrupt event time to come in (1s
- * is empirically about all it takes) */
- if (time < HZ)
- return 0;
- /* Wait for discovery to finish */
- scsi_flush_work(shost);
- return 1;
-}
-
-static void mvs_scan_start(struct Scsi_Host *shost)
-{
- int i;
- struct mvs_info *mvi = SHOST_TO_SAS_HA(shost)->lldd_ha;
-
- for (i = 0; i < mvi->chip->n_phy; ++i) {
- mvs_bytes_dmaed(mvi, i);
- }
-}
-
-static int mvs_slave_configure(struct scsi_device *sdev)
-{
- struct domain_device *dev = sdev_to_domain_dev(sdev);
- int ret = sas_slave_configure(sdev);
-
- if (ret)
- return ret;
-
- if (dev_is_sata(dev)) {
- /* struct ata_port *ap = dev->sata_dev.ap; */
- /* struct ata_device *adev = ap->link.device; */
-
- /* clamp at no NCQ for the time being */
- /* adev->flags |= ATA_DFLAG_NCQ_OFF; */
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
- }
- return 0;
-}
-
-static void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
-{
- struct pci_dev *pdev = mvi->pdev;
- struct sas_ha_struct *sas_ha = &mvi->sas;
- struct mvs_phy *phy = &mvi->phy[phy_no];
- struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
- phy->irq_status = mvs_read_port_irq_stat(mvi, phy_no);
- /*
- * events is port event now ,
- * we need check the interrupt status which belongs to per port.
- */
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Port %d Event = %X\n",
- phy_no, phy->irq_status);
-
- if (phy->irq_status & (PHYEV_POOF | PHYEV_DEC_ERR)) {
- mvs_release_task(mvi, phy_no);
- if (!mvs_is_phy_ready(mvi, phy_no)) {
- sas_phy_disconnected(sas_phy);
- sas_ha->notify_phy_event(sas_phy, PHYE_LOSS_OF_SIGNAL);
- dev_printk(KERN_INFO, &pdev->dev,
- "Port %d Unplug Notice\n", phy_no);
-
- } else
- mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET, NULL);
- }
- if (!(phy->irq_status & PHYEV_DEC_ERR)) {
- if (phy->irq_status & PHYEV_COMWAKE) {
- u32 tmp = mvs_read_port_irq_mask(mvi, phy_no);
- mvs_write_port_irq_mask(mvi, phy_no,
- tmp | PHYEV_SIG_FIS);
- }
- if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
- phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
- if (phy->phy_status) {
- mvs_detect_porttype(mvi, phy_no);
-
- if (phy->phy_type & PORT_TYPE_SATA) {
- u32 tmp = mvs_read_port_irq_mask(mvi,
- phy_no);
- tmp &= ~PHYEV_SIG_FIS;
- mvs_write_port_irq_mask(mvi,
- phy_no, tmp);
- }
-
- mvs_update_phyinfo(mvi, phy_no, 0);
- sas_ha->notify_phy_event(sas_phy,
- PHYE_OOB_DONE);
- mvs_bytes_dmaed(mvi, phy_no);
- } else {
- dev_printk(KERN_DEBUG, &pdev->dev,
- "plugin interrupt but phy is gone\n");
- mvs_phy_control(sas_phy, PHY_FUNC_LINK_RESET,
- NULL);
- }
- } else if (phy->irq_status & PHYEV_BROAD_CH) {
- mvs_release_task(mvi, phy_no);
- sas_ha->notify_port_event(sas_phy,
- PORTE_BROADCAST_RCVD);
- }
- }
- mvs_write_port_irq_stat(mvi, phy_no, phy->irq_status);
-}
-
-static void mvs_int_sata(struct mvs_info *mvi)
-{
- u32 tmp;
- void __iomem *regs = mvi->regs;
- tmp = mr32(INT_STAT_SRS);
- mw32(INT_STAT_SRS, tmp & 0xFFFF);
-}
-
-static void mvs_slot_reset(struct mvs_info *mvi, struct sas_task *task,
- u32 slot_idx)
-{
- void __iomem *regs = mvi->regs;
- struct domain_device *dev = task->dev;
- struct asd_sas_port *sas_port = dev->port;
- struct mvs_port *port = mvi->slot_info[slot_idx].port;
- u32 reg_set, phy_mask;
-
- if (!sas_protocol_ata(task->task_proto)) {
- reg_set = 0;
- phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
- sas_port->phy_mask;
- } else {
- reg_set = port->taskfileset;
- phy_mask = sas_port->phy_mask;
- }
- mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | slot_idx |
- (TXQ_CMD_SLOT_RESET << TXQ_CMD_SHIFT) |
- (phy_mask << TXQ_PHY_SHIFT) |
- (reg_set << TXQ_SRS_SHIFT));
-
- mw32(TX_PROD_IDX, mvi->tx_prod);
- mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
-}
-
-static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
- u32 slot_idx, int err)
-{
- struct mvs_port *port = mvi->slot_info[slot_idx].port;
- struct task_status_struct *tstat = &task->task_status;
- struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
- int stat = SAM_GOOD;
-
- resp->frame_len = sizeof(struct dev_to_host_fis);
- memcpy(&resp->ending_fis[0],
- SATA_RECEIVED_D2H_FIS(port->taskfileset),
- sizeof(struct dev_to_host_fis));
- tstat->buf_valid_size = sizeof(*resp);
- if (unlikely(err))
- stat = SAS_PROTO_RESPONSE;
- return stat;
-}
-
-static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
-{
- u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
- mvs_tag_clear(mvi, slot_idx);
-}
-
-static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
- struct mvs_slot_info *slot, u32 slot_idx)
-{
- if (!sas_protocol_ata(task->task_proto))
- if (slot->n_elem)
- pci_unmap_sg(mvi->pdev, task->scatter,
- slot->n_elem, task->data_dir);
-
- switch (task->task_proto) {
- case SAS_PROTOCOL_SMP:
- pci_unmap_sg(mvi->pdev, &task->smp_task.smp_resp, 1,
- PCI_DMA_FROMDEVICE);
- pci_unmap_sg(mvi->pdev, &task->smp_task.smp_req, 1,
- PCI_DMA_TODEVICE);
- break;
-
- case SAS_PROTOCOL_SATA:
- case SAS_PROTOCOL_STP:
- case SAS_PROTOCOL_SSP:
- default:
- /* do nothing */
- break;
- }
- list_del(&slot->list);
- task->lldd_task = NULL;
- slot->task = NULL;
- slot->port = NULL;
-}
-
-static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
- u32 slot_idx)
-{
- struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
- u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
- u32 err_dw1 = le32_to_cpu(*(u32 *) (slot->response + 4));
- int stat = SAM_CHECK_COND;
-
- if (err_dw1 & SLOT_BSY_ERR) {
- stat = SAS_QUEUE_FULL;
- mvs_slot_reset(mvi, task, slot_idx);
- }
- switch (task->task_proto) {
- case SAS_PROTOCOL_SSP:
- break;
- case SAS_PROTOCOL_SMP:
- break;
- case SAS_PROTOCOL_SATA:
- case SAS_PROTOCOL_STP:
- case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
- if (err_dw0 & TFILE_ERR)
- stat = mvs_sata_done(mvi, task, slot_idx, 1);
- break;
- default:
- break;
- }
-
- mvs_hexdump(16, (u8 *) slot->response, 0);
- return stat;
-}
-
-static int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
-{
- u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
- struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
- struct sas_task *task = slot->task;
- struct task_status_struct *tstat;
- struct mvs_port *port;
- bool aborted;
- void *to;
-
- if (unlikely(!task || !task->lldd_task))
- return -1;
-
- mvs_hba_cq_dump(mvi);
-
- spin_lock(&task->task_state_lock);
- aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
- if (!aborted) {
- task->task_state_flags &=
- ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
- task->task_state_flags |= SAS_TASK_STATE_DONE;
- }
- spin_unlock(&task->task_state_lock);
-
- if (aborted) {
- mvs_slot_task_free(mvi, task, slot, slot_idx);
- mvs_slot_free(mvi, rx_desc);
- return -1;
- }
-
- port = slot->port;
- tstat = &task->task_status;
- memset(tstat, 0, sizeof(*tstat));
- tstat->resp = SAS_TASK_COMPLETE;
-
- if (unlikely(!port->port_attached || flags)) {
- mvs_slot_err(mvi, task, slot_idx);
- if (!sas_protocol_ata(task->task_proto))
- tstat->stat = SAS_PHY_DOWN;
- goto out;
- }
-
- /* error info record present */
- if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
- tstat->stat = mvs_slot_err(mvi, task, slot_idx);
- goto out;
- }
-
- switch (task->task_proto) {
- case SAS_PROTOCOL_SSP:
- /* hw says status == 0, datapres == 0 */
- if (rx_desc & RXQ_GOOD) {
- tstat->stat = SAM_GOOD;
- tstat->resp = SAS_TASK_COMPLETE;
- }
- /* response frame present */
- else if (rx_desc & RXQ_RSP) {
- struct ssp_response_iu *iu =
- slot->response + sizeof(struct mvs_err_info);
- sas_ssp_task_response(&mvi->pdev->dev, task, iu);
- }
-
- /* should never happen? */
- else
- tstat->stat = SAM_CHECK_COND;
- break;
-
- case SAS_PROTOCOL_SMP: {
- struct scatterlist *sg_resp = &task->smp_task.smp_resp;
- tstat->stat = SAM_GOOD;
- to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
- memcpy(to + sg_resp->offset,
- slot->response + sizeof(struct mvs_err_info),
- sg_dma_len(sg_resp));
- kunmap_atomic(to, KM_IRQ0);
- break;
- }
-
- case SAS_PROTOCOL_SATA:
- case SAS_PROTOCOL_STP:
- case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
- tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
- break;
- }
-
- default:
- tstat->stat = SAM_CHECK_COND;
- break;
- }
-
-out:
- mvs_slot_task_free(mvi, task, slot, slot_idx);
- if (unlikely(tstat->stat != SAS_QUEUE_FULL))
- mvs_slot_free(mvi, rx_desc);
-
- spin_unlock(&mvi->lock);
- task->task_done(task);
- spin_lock(&mvi->lock);
- return tstat->stat;
-}
-
-static void mvs_release_task(struct mvs_info *mvi, int phy_no)
-{
- struct list_head *pos, *n;
- struct mvs_slot_info *slot;
- struct mvs_phy *phy = &mvi->phy[phy_no];
- struct mvs_port *port = phy->port;
- u32 rx_desc;
-
- if (!port)
- return;
-
- list_for_each_safe(pos, n, &port->list) {
- slot = container_of(pos, struct mvs_slot_info, list);
- rx_desc = (u32) (slot - mvi->slot_info);
- mvs_slot_complete(mvi, rx_desc, 1);
- }
-}
-
-static void mvs_int_full(struct mvs_info *mvi)
-{
- void __iomem *regs = mvi->regs;
- u32 tmp, stat;
- int i;
-
- stat = mr32(INT_STAT);
-
- mvs_int_rx(mvi, false);
-
- for (i = 0; i < MVS_MAX_PORTS; i++) {
- tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
- if (tmp)
- mvs_int_port(mvi, i, tmp);
- }
-
- if (stat & CINT_SRS)
- mvs_int_sata(mvi);
-
- mw32(INT_STAT, stat);
-}
-
-static int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
-{
- void __iomem *regs = mvi->regs;
- u32 rx_prod_idx, rx_desc;
- bool attn = false;
- struct pci_dev *pdev = mvi->pdev;
-
- /* the first dword in the RX ring is special: it contains
- * a mirror of the hardware's RX producer index, so that
- * we don't have to stall the CPU reading that register.
- * The actual RX ring is offset by one dword, due to this.
- */
- rx_prod_idx = mvi->rx_cons;
- mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
- if (mvi->rx_cons == 0xfff) /* h/w hasn't touched RX ring yet */
- return 0;
-
- /* The CMPL_Q may come late, read from register and try again
- * note: if coalescing is enabled,
- * it will need to read from register every time for sure
- */
- if (mvi->rx_cons == rx_prod_idx)
- mvi->rx_cons = mr32(RX_CONS_IDX) & RX_RING_SZ_MASK;
-
- if (mvi->rx_cons == rx_prod_idx)
- return 0;
-
- while (mvi->rx_cons != rx_prod_idx) {
-
- /* increment our internal RX consumer pointer */
- rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
-
- rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
-
- if (likely(rx_desc & RXQ_DONE))
- mvs_slot_complete(mvi, rx_desc, 0);
- if (rx_desc & RXQ_ATTN) {
- attn = true;
- dev_printk(KERN_DEBUG, &pdev->dev, "ATTN %X\n",
- rx_desc);
- } else if (rx_desc & RXQ_ERR) {
- if (!(rx_desc & RXQ_DONE))
- mvs_slot_complete(mvi, rx_desc, 0);
- dev_printk(KERN_DEBUG, &pdev->dev, "RXQ_ERR %X\n",
- rx_desc);
- } else if (rx_desc & RXQ_SLOT_RESET) {
- dev_printk(KERN_DEBUG, &pdev->dev, "Slot reset[%X]\n",
- rx_desc);
- mvs_slot_free(mvi, rx_desc);
- }
- }
-
- if (attn && self_clear)
- mvs_int_full(mvi);
-
- return 0;
-}
-
-#ifdef MVS_USE_TASKLET
-static void mvs_tasklet(unsigned long data)
-{
- struct mvs_info *mvi = (struct mvs_info *) data;
- unsigned long flags;
-
- spin_lock_irqsave(&mvi->lock, flags);
-
-#ifdef MVS_DISABLE_MSI
- mvs_int_full(mvi);
-#else
- mvs_int_rx(mvi, true);
-#endif
- spin_unlock_irqrestore(&mvi->lock, flags);
-}
-#endif
-
-static irqreturn_t mvs_interrupt(int irq, void *opaque)
-{
- struct mvs_info *mvi = opaque;
- void __iomem *regs = mvi->regs;
- u32 stat;
-
- stat = mr32(GBL_INT_STAT);
-
- if (stat == 0 || stat == 0xffffffff)
- return IRQ_NONE;
-
- /* clear CMD_CMPLT ASAP */
- mw32_f(INT_STAT, CINT_DONE);
-
-#ifndef MVS_USE_TASKLET
- spin_lock(&mvi->lock);
-
- mvs_int_full(mvi);
-
- spin_unlock(&mvi->lock);
-#else
- tasklet_schedule(&mvi->tasklet);
-#endif
- return IRQ_HANDLED;
-}
-
-#ifndef MVS_DISABLE_MSI
-static irqreturn_t mvs_msi_interrupt(int irq, void *opaque)
-{
- struct mvs_info *mvi = opaque;
-
-#ifndef MVS_USE_TASKLET
- spin_lock(&mvi->lock);
-
- mvs_int_rx(mvi, true);
-
- spin_unlock(&mvi->lock);
-#else
- tasklet_schedule(&mvi->tasklet);
-#endif
- return IRQ_HANDLED;
-}
-#endif
-
-struct mvs_task_exec_info {
- struct sas_task *task;
- struct mvs_cmd_hdr *hdr;
- struct mvs_port *port;
- u32 tag;
- int n_elem;
-};
-
-static int mvs_task_prep_smp(struct mvs_info *mvi,
- struct mvs_task_exec_info *tei)
-{
- int elem, rc, i;
- struct sas_task *task = tei->task;
- struct mvs_cmd_hdr *hdr = tei->hdr;
- struct scatterlist *sg_req, *sg_resp;
- u32 req_len, resp_len, tag = tei->tag;
- void *buf_tmp;
- u8 *buf_oaf;
- dma_addr_t buf_tmp_dma;
- struct mvs_prd *buf_prd;
- struct scatterlist *sg;
- struct mvs_slot_info *slot = &mvi->slot_info[tag];
- struct asd_sas_port *sas_port = task->dev->port;
- u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
-#if _MV_DUMP
- u8 *buf_cmd;
- void *from;
-#endif
- /*
- * DMA-map SMP request, response buffers
- */
- sg_req = &task->smp_task.smp_req;
- elem = pci_map_sg(mvi->pdev, sg_req, 1, PCI_DMA_TODEVICE);
- if (!elem)
- return -ENOMEM;
- req_len = sg_dma_len(sg_req);
-
- sg_resp = &task->smp_task.smp_resp;
- elem = pci_map_sg(mvi->pdev, sg_resp, 1, PCI_DMA_FROMDEVICE);
- if (!elem) {
- rc = -ENOMEM;
- goto err_out;
- }
- resp_len = sg_dma_len(sg_resp);
-
- /* must be in dwords */
- if ((req_len & 0x3) || (resp_len & 0x3)) {
- rc = -EINVAL;
- goto err_out_2;
- }
-
- /*
- * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
- */
-
- /* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
- buf_tmp = slot->buf;
- buf_tmp_dma = slot->buf_dma;
-
-#if _MV_DUMP
- buf_cmd = buf_tmp;
- hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
- buf_tmp += req_len;
- buf_tmp_dma += req_len;
- slot->cmd_size = req_len;
-#else
- hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
-#endif
-
- /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
- buf_oaf = buf_tmp;
- hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
- buf_tmp += MVS_OAF_SZ;
- buf_tmp_dma += MVS_OAF_SZ;
-
- /* region 3: PRD table ********************************************* */
- buf_prd = buf_tmp;
- if (tei->n_elem)
- hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
- else
- hdr->prd_tbl = 0;
-
- i = sizeof(struct mvs_prd) * tei->n_elem;
- buf_tmp += i;
- buf_tmp_dma += i;
-
- /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
- slot->response = buf_tmp;
- hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
- /*
- * Fill in TX ring and command slot header
- */
- slot->tx = mvi->tx_prod;
- mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
- TXQ_MODE_I | tag |
- (sas_port->phy_mask << TXQ_PHY_SHIFT));
-
- hdr->flags |= flags;
- hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
- hdr->tags = cpu_to_le32(tag);
- hdr->data_len = 0;
-
- /* generate open address frame hdr (first 12 bytes) */
- buf_oaf[0] = (1 << 7) | (0 << 4) | 0x01; /* initiator, SMP, ftype 1h */
- buf_oaf[1] = task->dev->linkrate & 0xf;
- *(u16 *)(buf_oaf + 2) = 0xFFFF; /* SAS SPEC */
- memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
- /* fill in PRD (scatter/gather) table, if any */
- for_each_sg(task->scatter, sg, tei->n_elem, i) {
- buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
- buf_prd->len = cpu_to_le32(sg_dma_len(sg));
- buf_prd++;
- }
-
-#if _MV_DUMP
- /* copy cmd table */
- from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
- memcpy(buf_cmd, from + sg_req->offset, req_len);
- kunmap_atomic(from, KM_IRQ0);
-#endif
- return 0;
-
-err_out_2:
- pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_resp, 1,
- PCI_DMA_FROMDEVICE);
-err_out:
- pci_unmap_sg(mvi->pdev, &tei->task->smp_task.smp_req, 1,
- PCI_DMA_TODEVICE);
- return rc;
-}
-
-static void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
- void __iomem *regs = mvi->regs;
- u32 tmp, offs;
- u8 *tfs = &port->taskfileset;
-
- if (*tfs == MVS_ID_NOT_MAPPED)
- return;
-
- offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
- if (*tfs < 16) {
- tmp = mr32(PCS);
- mw32(PCS, tmp & ~offs);
- } else {
- tmp = mr32(CTL);
- mw32(CTL, tmp & ~offs);
- }
-
- tmp = mr32(INT_STAT_SRS) & (1U << *tfs);
- if (tmp)
- mw32(INT_STAT_SRS, tmp);
-
- *tfs = MVS_ID_NOT_MAPPED;
-}
-
-static u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
-{
- int i;
- u32 tmp, offs;
- void __iomem *regs = mvi->regs;
-
- if (port->taskfileset != MVS_ID_NOT_MAPPED)
- return 0;
-
- tmp = mr32(PCS);
-
- for (i = 0; i < mvi->chip->srs_sz; i++) {
- if (i == 16)
- tmp = mr32(CTL);
- offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
- if (!(tmp & offs)) {
- port->taskfileset = i;
-
- if (i < 16)
- mw32(PCS, tmp | offs);
- else
- mw32(CTL, tmp | offs);
- tmp = mr32(INT_STAT_SRS) & (1U << i);
- if (tmp)
- mw32(INT_STAT_SRS, tmp);
- return 0;
- }
- }
- return MVS_ID_NOT_MAPPED;
-}
-
-static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
-{
- struct ata_queued_cmd *qc = task->uldd_task;
-
- if (qc) {
- if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
- qc->tf.command == ATA_CMD_FPDMA_READ) {
- *tag = qc->tag;
- return 1;
- }
- }
-
- return 0;
-}
-
-static int mvs_task_prep_ata(struct mvs_info *mvi,
- struct mvs_task_exec_info *tei)
-{
- struct sas_task *task = tei->task;
- struct domain_device *dev = task->dev;
- struct mvs_cmd_hdr *hdr = tei->hdr;
- struct asd_sas_port *sas_port = dev->port;
- struct mvs_slot_info *slot;
- struct scatterlist *sg;
- struct mvs_prd *buf_prd;
- struct mvs_port *port = tei->port;
- u32 tag = tei->tag;
- u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
- void *buf_tmp;
- u8 *buf_cmd, *buf_oaf;
- dma_addr_t buf_tmp_dma;
- u32 i, req_len, resp_len;
- const u32 max_resp_len = SB_RFB_MAX;
-
- if (mvs_assign_reg_set(mvi, port) == MVS_ID_NOT_MAPPED)
- return -EBUSY;
-
- slot = &mvi->slot_info[tag];
- slot->tx = mvi->tx_prod;
- mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
- (TXQ_CMD_STP << TXQ_CMD_SHIFT) |
- (sas_port->phy_mask << TXQ_PHY_SHIFT) |
- (port->taskfileset << TXQ_SRS_SHIFT));
-
- if (task->ata_task.use_ncq)
- flags |= MCH_FPDMA;
- if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
- if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
- flags |= MCH_ATAPI;
- }
-
- /* FIXME: fill in port multiplier number */
-
- hdr->flags = cpu_to_le32(flags);
-
- /* FIXME: the low order order 5 bits for the TAG if enable NCQ */
- if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr->tags))
- task->ata_task.fis.sector_count |= hdr->tags << 3;
- else
- hdr->tags = cpu_to_le32(tag);
- hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
- /*
- * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
- */
-
- /* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
- buf_cmd = buf_tmp = slot->buf;
- buf_tmp_dma = slot->buf_dma;
-
- hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
- buf_tmp += MVS_ATA_CMD_SZ;
- buf_tmp_dma += MVS_ATA_CMD_SZ;
-#if _MV_DUMP
- slot->cmd_size = MVS_ATA_CMD_SZ;
-#endif
-
- /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
- /* used for STP. unused for SATA? */
- buf_oaf = buf_tmp;
- hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
- buf_tmp += MVS_OAF_SZ;
- buf_tmp_dma += MVS_OAF_SZ;
-
- /* region 3: PRD table ********************************************* */
- buf_prd = buf_tmp;
- if (tei->n_elem)
- hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
- else
- hdr->prd_tbl = 0;
-
- i = sizeof(struct mvs_prd) * tei->n_elem;
- buf_tmp += i;
- buf_tmp_dma += i;
-
- /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
- /* FIXME: probably unused, for SATA. kept here just in case
- * we get a STP/SATA error information record
- */
- slot->response = buf_tmp;
- hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
- req_len = sizeof(struct host_to_dev_fis);
- resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
- sizeof(struct mvs_err_info) - i;
-
- /* request, response lengths */
- resp_len = min(resp_len, max_resp_len);
- hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
- task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
- /* fill in command FIS and ATAPI CDB */
- memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
- if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
- memcpy(buf_cmd + STP_ATAPI_CMD,
- task->ata_task.atapi_packet, 16);
-
- /* generate open address frame hdr (first 12 bytes) */
- buf_oaf[0] = (1 << 7) | (2 << 4) | 0x1; /* initiator, STP, ftype 1h */
- buf_oaf[1] = task->dev->linkrate & 0xf;
- *(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
- memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
- /* fill in PRD (scatter/gather) table, if any */
- for_each_sg(task->scatter, sg, tei->n_elem, i) {
- buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
- buf_prd->len = cpu_to_le32(sg_dma_len(sg));
- buf_prd++;
- }
-
- return 0;
-}
-
-static int mvs_task_prep_ssp(struct mvs_info *mvi,
- struct mvs_task_exec_info *tei)
-{
- struct sas_task *task = tei->task;
- struct mvs_cmd_hdr *hdr = tei->hdr;
- struct mvs_port *port = tei->port;
- struct mvs_slot_info *slot;
- struct scatterlist *sg;
- struct mvs_prd *buf_prd;
- struct ssp_frame_hdr *ssp_hdr;
- void *buf_tmp;
- u8 *buf_cmd, *buf_oaf, fburst = 0;
- dma_addr_t buf_tmp_dma;
- u32 flags;
- u32 resp_len, req_len, i, tag = tei->tag;
- const u32 max_resp_len = SB_RFB_MAX;
- u8 phy_mask;
-
- slot = &mvi->slot_info[tag];
-
- phy_mask = (port->wide_port_phymap) ? port->wide_port_phymap :
- task->dev->port->phy_mask;
- slot->tx = mvi->tx_prod;
- mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
- (TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
- (phy_mask << TXQ_PHY_SHIFT));
-
- flags = MCH_RETRY;
- if (task->ssp_task.enable_first_burst) {
- flags |= MCH_FBURST;
- fburst = (1 << 7);
- }
- hdr->flags = cpu_to_le32(flags |
- (tei->n_elem << MCH_PRD_LEN_SHIFT) |
- (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT));
-
- hdr->tags = cpu_to_le32(tag);
- hdr->data_len = cpu_to_le32(task->total_xfer_len);
-
- /*
- * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
- */
-
- /* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
- buf_cmd = buf_tmp = slot->buf;
- buf_tmp_dma = slot->buf_dma;
-
- hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
-
- buf_tmp += MVS_SSP_CMD_SZ;
- buf_tmp_dma += MVS_SSP_CMD_SZ;
-#if _MV_DUMP
- slot->cmd_size = MVS_SSP_CMD_SZ;
-#endif
-
- /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
- buf_oaf = buf_tmp;
- hdr->open_frame = cpu_to_le64(buf_tmp_dma);
-
- buf_tmp += MVS_OAF_SZ;
- buf_tmp_dma += MVS_OAF_SZ;
-
- /* region 3: PRD table ********************************************* */
- buf_prd = buf_tmp;
- if (tei->n_elem)
- hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
- else
- hdr->prd_tbl = 0;
-
- i = sizeof(struct mvs_prd) * tei->n_elem;
- buf_tmp += i;
- buf_tmp_dma += i;
-
- /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
- slot->response = buf_tmp;
- hdr->status_buf = cpu_to_le64(buf_tmp_dma);
-
- resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
- sizeof(struct mvs_err_info) - i;
- resp_len = min(resp_len, max_resp_len);
-
- req_len = sizeof(struct ssp_frame_hdr) + 28;
-
- /* request, response lengths */
- hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
-
- /* generate open address frame hdr (first 12 bytes) */
- buf_oaf[0] = (1 << 7) | (1 << 4) | 0x1; /* initiator, SSP, ftype 1h */
- buf_oaf[1] = task->dev->linkrate & 0xf;
- *(u16 *)(buf_oaf + 2) = cpu_to_be16(tag);
- memcpy(buf_oaf + 4, task->dev->sas_addr, SAS_ADDR_SIZE);
-
- /* fill in SSP frame header (Command Table.SSP frame header) */
- ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
- ssp_hdr->frame_type = SSP_COMMAND;
- memcpy(ssp_hdr->hashed_dest_addr, task->dev->hashed_sas_addr,
- HASHED_SAS_ADDR_SIZE);
- memcpy(ssp_hdr->hashed_src_addr,
- task->dev->port->ha->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
- ssp_hdr->tag = cpu_to_be16(tag);
-
- /* fill in command frame IU */
- buf_cmd += sizeof(*ssp_hdr);
- memcpy(buf_cmd, &task->ssp_task.LUN, 8);
- buf_cmd[9] = fburst | task->ssp_task.task_attr |
- (task->ssp_task.task_prio << 3);
- memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
-
- /* fill in PRD (scatter/gather) table, if any */
- for_each_sg(task->scatter, sg, tei->n_elem, i) {
- buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
- buf_prd->len = cpu_to_le32(sg_dma_len(sg));
- buf_prd++;
- }
-
- return 0;
-}
-
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags)
-{
- struct domain_device *dev = task->dev;
- struct mvs_info *mvi = dev->port->ha->lldd_ha;
- struct pci_dev *pdev = mvi->pdev;
- void __iomem *regs = mvi->regs;
- struct mvs_task_exec_info tei;
- struct sas_task *t = task;
- struct mvs_slot_info *slot;
- u32 tag = 0xdeadbeef, rc, n_elem = 0;
- unsigned long flags;
- u32 n = num, pass = 0;
-
- spin_lock_irqsave(&mvi->lock, flags);
- do {
- dev = t->dev;
- tei.port = &mvi->port[dev->port->id];
-
- if (!tei.port->port_attached) {
- if (sas_protocol_ata(t->task_proto)) {
- rc = SAS_PHY_DOWN;
- goto out_done;
- } else {
- struct task_status_struct *ts = &t->task_status;
- ts->resp = SAS_TASK_UNDELIVERED;
- ts->stat = SAS_PHY_DOWN;
- t->task_done(t);
- if (n > 1)
- t = list_entry(t->list.next,
- struct sas_task, list);
- continue;
- }
- }
-
- if (!sas_protocol_ata(t->task_proto)) {
- if (t->num_scatter) {
- n_elem = pci_map_sg(mvi->pdev, t->scatter,
- t->num_scatter,
- t->data_dir);
- if (!n_elem) {
- rc = -ENOMEM;
- goto err_out;
- }
- }
- } else {
- n_elem = t->num_scatter;
- }
-
- rc = mvs_tag_alloc(mvi, &tag);
- if (rc)
- goto err_out;
-
- slot = &mvi->slot_info[tag];
- t->lldd_task = NULL;
- slot->n_elem = n_elem;
- memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
- tei.task = t;
- tei.hdr = &mvi->slot[tag];
- tei.tag = tag;
- tei.n_elem = n_elem;
-
- switch (t->task_proto) {
- case SAS_PROTOCOL_SMP:
- rc = mvs_task_prep_smp(mvi, &tei);
- break;
- case SAS_PROTOCOL_SSP:
- rc = mvs_task_prep_ssp(mvi, &tei);
- break;
- case SAS_PROTOCOL_SATA:
- case SAS_PROTOCOL_STP:
- case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
- rc = mvs_task_prep_ata(mvi, &tei);
- break;
- default:
- dev_printk(KERN_ERR, &pdev->dev,
- "unknown sas_task proto: 0x%x\n",
- t->task_proto);
- rc = -EINVAL;
- break;
- }
-
- if (rc)
- goto err_out_tag;
-
- slot->task = t;
- slot->port = tei.port;
- t->lldd_task = (void *) slot;
- list_add_tail(&slot->list, &slot->port->list);
- /* TODO: select normal or high priority */
-
- spin_lock(&t->task_state_lock);
- t->task_state_flags |= SAS_TASK_AT_INITIATOR;
- spin_unlock(&t->task_state_lock);
-
- mvs_hba_memory_dump(mvi, tag, t->task_proto);
-
- ++pass;
- mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
- if (n > 1)
- t = list_entry(t->list.next, struct sas_task, list);
- } while (--n);
-
- rc = 0;
- goto out_done;
-
-err_out_tag:
- mvs_tag_free(mvi, tag);
-err_out:
- dev_printk(KERN_ERR, &pdev->dev, "mvsas exec failed[%d]!\n", rc);
- if (!sas_protocol_ata(t->task_proto))
- if (n_elem)
- pci_unmap_sg(mvi->pdev, t->scatter, n_elem,
- t->data_dir);
-out_done:
- if (pass)
- mw32(TX_PROD_IDX, (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
- spin_unlock_irqrestore(&mvi->lock, flags);
- return rc;
-}
-
-static int mvs_task_abort(struct sas_task *task)
-{
- int rc;
- unsigned long flags;
- struct mvs_info *mvi = task->dev->port->ha->lldd_ha;
- struct pci_dev *pdev = mvi->pdev;
- int tag;
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (task->task_state_flags & SAS_TASK_STATE_DONE) {
- rc = TMF_RESP_FUNC_COMPLETE;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- goto out_done;
- }
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- switch (task->task_proto) {
- case SAS_PROTOCOL_SMP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SMP Abort! \n");
- break;
- case SAS_PROTOCOL_SSP:
- dev_printk(KERN_DEBUG, &pdev->dev, "SSP Abort! \n");
- break;
- case SAS_PROTOCOL_SATA:
- case SAS_PROTOCOL_STP:
- case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:{
- dev_printk(KERN_DEBUG, &pdev->dev, "STP Abort! \n");
-#if _MV_DUMP
- dev_printk(KERN_DEBUG, &pdev->dev, "Dump D2H FIS: \n");
- mvs_hexdump(sizeof(struct host_to_dev_fis),
- (void *)&task->ata_task.fis, 0);
- dev_printk(KERN_DEBUG, &pdev->dev, "Dump ATAPI Cmd : \n");
- mvs_hexdump(16, task->ata_task.atapi_packet, 0);
-#endif
- spin_lock_irqsave(&task->task_state_lock, flags);
- if (task->task_state_flags & SAS_TASK_NEED_DEV_RESET) {
- /* TODO */
- ;
- }
- spin_unlock_irqrestore(&task->task_state_lock, flags);
- break;
- }
- default:
- break;
- }
-
- if (mvs_find_tag(mvi, task, &tag)) {
- spin_lock_irqsave(&mvi->lock, flags);
- mvs_slot_task_free(mvi, task, &mvi->slot_info[tag], tag);
- spin_unlock_irqrestore(&mvi->lock, flags);
- }
- if (!mvs_task_exec(task, 1, GFP_ATOMIC))
- rc = TMF_RESP_FUNC_COMPLETE;
- else
- rc = TMF_RESP_FUNC_FAILED;
-out_done:
- return rc;
-}
-
-static void mvs_free(struct mvs_info *mvi)
-{
- int i;
-
- if (!mvi)
- return;
-
- for (i = 0; i < MVS_SLOTS; i++) {
- struct mvs_slot_info *slot = &mvi->slot_info[i];
-
- if (slot->buf)
- dma_free_coherent(&mvi->pdev->dev, MVS_SLOT_BUF_SZ,
- slot->buf, slot->buf_dma);
- }
-
- if (mvi->tx)
- dma_free_coherent(&mvi->pdev->dev,
- sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
- mvi->tx, mvi->tx_dma);
- if (mvi->rx_fis)
- dma_free_coherent(&mvi->pdev->dev, MVS_RX_FISL_SZ,
- mvi->rx_fis, mvi->rx_fis_dma);
- if (mvi->rx)
- dma_free_coherent(&mvi->pdev->dev,
- sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
- mvi->rx, mvi->rx_dma);
- if (mvi->slot)
- dma_free_coherent(&mvi->pdev->dev,
- sizeof(*mvi->slot) * MVS_SLOTS,
- mvi->slot, mvi->slot_dma);
-#ifdef MVS_ENABLE_PERI
- if (mvi->peri_regs)
- iounmap(mvi->peri_regs);
-#endif
- if (mvi->regs)
- iounmap(mvi->regs);
- if (mvi->shost)
- scsi_host_put(mvi->shost);
- kfree(mvi->sas.sas_port);
- kfree(mvi->sas.sas_phy);
- kfree(mvi);
-}
-
-/* FIXME: locking? */
-static int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
- void *funcdata)
-{
- struct mvs_info *mvi = sas_phy->ha->lldd_ha;
- int rc = 0, phy_id = sas_phy->id;
- u32 tmp;
-
- tmp = mvs_read_phy_ctl(mvi, phy_id);
-
- switch (func) {
- case PHY_FUNC_SET_LINK_RATE:{
- struct sas_phy_linkrates *rates = funcdata;
- u32 lrmin = 0, lrmax = 0;
-
- lrmin = (rates->minimum_linkrate << 8);
- lrmax = (rates->maximum_linkrate << 12);
-
- if (lrmin) {
- tmp &= ~(0xf << 8);
- tmp |= lrmin;
- }
- if (lrmax) {
- tmp &= ~(0xf << 12);
- tmp |= lrmax;
- }
- mvs_write_phy_ctl(mvi, phy_id, tmp);
- break;
- }
-
- case PHY_FUNC_HARD_RESET:
- if (tmp & PHY_RST_HARD)
- break;
- mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST_HARD);
- break;
-
- case PHY_FUNC_LINK_RESET:
- mvs_write_phy_ctl(mvi, phy_id, tmp | PHY_RST);
- break;
-
- case PHY_FUNC_DISABLE:
- case PHY_FUNC_RELEASE_SPINUP_HOLD:
- default:
- rc = -EOPNOTSUPP;
- }
-
- return rc;
-}
-
-static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
-{
- struct mvs_phy *phy = &mvi->phy[phy_id];
- struct asd_sas_phy *sas_phy = &phy->sas_phy;
-
- sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
- sas_phy->class = SAS;
- sas_phy->iproto = SAS_PROTOCOL_ALL;
- sas_phy->tproto = 0;
- sas_phy->type = PHY_TYPE_PHYSICAL;
- sas_phy->role = PHY_ROLE_INITIATOR;
- sas_phy->oob_mode = OOB_NOT_CONNECTED;
- sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
-
- sas_phy->id = phy_id;
- sas_phy->sas_addr = &mvi->sas_addr[0];
- sas_phy->frame_rcvd = &phy->frame_rcvd[0];
- sas_phy->ha = &mvi->sas;
- sas_phy->lldd_phy = phy;
-}
-
-static struct mvs_info *__devinit mvs_alloc(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct mvs_info *mvi;
- unsigned long res_start, res_len, res_flag;
- struct asd_sas_phy **arr_phy;
- struct asd_sas_port **arr_port;
- const struct mvs_chip_info *chip = &mvs_chips[ent->driver_data];
- int i;
-
- /*
- * alloc and init our per-HBA mvs_info struct
- */
-
- mvi = kzalloc(sizeof(*mvi), GFP_KERNEL);
- if (!mvi)
- return NULL;
-
- spin_lock_init(&mvi->lock);
-#ifdef MVS_USE_TASKLET
- tasklet_init(&mvi->tasklet, mvs_tasklet, (unsigned long)mvi);
-#endif
- mvi->pdev = pdev;
- mvi->chip = chip;
-
- if (pdev->device == 0x6440 && pdev->revision == 0)
- mvi->flags |= MVF_PHY_PWR_FIX;
-
- /*
- * alloc and init SCSI, SAS glue
- */
-
- mvi->shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
- if (!mvi->shost)
- goto err_out;
-
- arr_phy = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
- arr_port = kcalloc(MVS_MAX_PHYS, sizeof(void *), GFP_KERNEL);
- if (!arr_phy || !arr_port)
- goto err_out;
-
- for (i = 0; i < MVS_MAX_PHYS; i++) {
- mvs_phy_init(mvi, i);
- arr_phy[i] = &mvi->phy[i].sas_phy;
- arr_port[i] = &mvi->port[i].sas_port;
- mvi->port[i].taskfileset = MVS_ID_NOT_MAPPED;
- mvi->port[i].wide_port_phymap = 0;
- mvi->port[i].port_attached = 0;
- INIT_LIST_HEAD(&mvi->port[i].list);
- }
-
- SHOST_TO_SAS_HA(mvi->shost) = &mvi->sas;
- mvi->shost->transportt = mvs_stt;
- mvi->shost->max_id = 21;
- mvi->shost->max_lun = ~0;
- mvi->shost->max_channel = 0;
- mvi->shost->max_cmd_len = 16;
-
- mvi->sas.sas_ha_name = DRV_NAME;
- mvi->sas.dev = &pdev->dev;
- mvi->sas.lldd_module = THIS_MODULE;
- mvi->sas.sas_addr = &mvi->sas_addr[0];
- mvi->sas.sas_phy = arr_phy;
- mvi->sas.sas_port = arr_port;
- mvi->sas.num_phys = chip->n_phy;
- mvi->sas.lldd_max_execute_num = 1;
- mvi->sas.lldd_queue_size = MVS_QUEUE_SIZE;
- mvi->shost->can_queue = MVS_CAN_QUEUE;
- mvi->shost->cmd_per_lun = MVS_SLOTS / mvi->sas.num_phys;
- mvi->sas.lldd_ha = mvi;
- mvi->sas.core.shost = mvi->shost;
-
- mvs_tag_init(mvi);
-
- /*
- * ioremap main and peripheral registers
- */
-
-#ifdef MVS_ENABLE_PERI
- res_start = pci_resource_start(pdev, 2);
- res_len = pci_resource_len(pdev, 2);
- if (!res_start || !res_len)
- goto err_out;
-
- mvi->peri_regs = ioremap_nocache(res_start, res_len);
- if (!mvi->peri_regs)
- goto err_out;
-#endif
-
- res_start = pci_resource_start(pdev, 4);
- res_len = pci_resource_len(pdev, 4);
- if (!res_start || !res_len)
- goto err_out;
-
- res_flag = pci_resource_flags(pdev, 4);
- if (res_flag & IORESOURCE_CACHEABLE)
- mvi->regs = ioremap(res_start, res_len);
- else
- mvi->regs = ioremap_nocache(res_start, res_len);
-
- if (!mvi->regs)
- goto err_out;
-
- /*
- * alloc and init our DMA areas
- */
-
- mvi->tx = dma_alloc_coherent(&pdev->dev,
- sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
- &mvi->tx_dma, GFP_KERNEL);
- if (!mvi->tx)
- goto err_out;
- memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
-
- mvi->rx_fis = dma_alloc_coherent(&pdev->dev, MVS_RX_FISL_SZ,
- &mvi->rx_fis_dma, GFP_KERNEL);
- if (!mvi->rx_fis)
- goto err_out;
- memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
-
- mvi->rx = dma_alloc_coherent(&pdev->dev,
- sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
- &mvi->rx_dma, GFP_KERNEL);
- if (!mvi->rx)
- goto err_out;
- memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
-
- mvi->rx[0] = cpu_to_le32(0xfff);
- mvi->rx_cons = 0xfff;
-
- mvi->slot = dma_alloc_coherent(&pdev->dev,
- sizeof(*mvi->slot) * MVS_SLOTS,
- &mvi->slot_dma, GFP_KERNEL);
- if (!mvi->slot)
- goto err_out;
- memset(mvi->slot, 0, sizeof(*mvi->slot) * MVS_SLOTS);
-
- for (i = 0; i < MVS_SLOTS; i++) {
- struct mvs_slot_info *slot = &mvi->slot_info[i];
-
- slot->buf = dma_alloc_coherent(&pdev->dev, MVS_SLOT_BUF_SZ,
- &slot->buf_dma, GFP_KERNEL);
- if (!slot->buf)
- goto err_out;
- memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
- }
-
- /* finally, read NVRAM to get our SAS address */
- if (mvs_nvram_read(mvi, NVR_SAS_ADDR, &mvi->sas_addr, 8))
- goto err_out;
- return mvi;
-
-err_out:
- mvs_free(mvi);
- return NULL;
-}
-
-static u32 mvs_cr32(void __iomem *regs, u32 addr)
-{
- mw32(CMD_ADDR, addr);
- return mr32(CMD_DATA);
-}
-
-static void mvs_cw32(void __iomem *regs, u32 addr, u32 val)
-{
- mw32(CMD_ADDR, addr);
- mw32(CMD_DATA, val);
-}
-
-static u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
-{
- void __iomem *regs = mvi->regs;
- return (port < 4)?mr32(P0_SER_CTLSTAT + port * 4):
- mr32(P4_SER_CTLSTAT + (port - 4) * 4);
-}
-
-static void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
-{
- void __iomem *regs = mvi->regs;
- if (port < 4)
- mw32(P0_SER_CTLSTAT + port * 4, val);
- else
- mw32(P4_SER_CTLSTAT + (port - 4) * 4, val);
-}
-
-static u32 mvs_read_port(struct mvs_info *mvi, u32 off, u32 off2, u32 port)
-{
- void __iomem *regs = mvi->regs + off;
- void __iomem *regs2 = mvi->regs + off2;
- return (port < 4)?readl(regs + port * 8):
- readl(regs2 + (port - 4) * 8);
-}
-
-static void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
- u32 port, u32 val)
-{
- void __iomem *regs = mvi->regs + off;
- void __iomem *regs2 = mvi->regs + off2;
- if (port < 4)
- writel(val, regs + port * 8);
- else
- writel(val, regs2 + (port - 4) * 8);
-}
-
-static u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
-{
- return mvs_read_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port);
-}
-
-static void mvs_write_port_cfg_data(struct mvs_info *mvi, u32 port, u32 val)
-{
- mvs_write_port(mvi, MVS_P0_CFG_DATA, MVS_P4_CFG_DATA, port, val);
-}
-
-static void mvs_write_port_cfg_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
- mvs_write_port(mvi, MVS_P0_CFG_ADDR, MVS_P4_CFG_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
-{
- return mvs_read_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port);
-}
-
-static void mvs_write_port_vsr_data(struct mvs_info *mvi, u32 port, u32 val)
-{
- mvs_write_port(mvi, MVS_P0_VSR_DATA, MVS_P4_VSR_DATA, port, val);
-}
-
-static void mvs_write_port_vsr_addr(struct mvs_info *mvi, u32 port, u32 addr)
-{
- mvs_write_port(mvi, MVS_P0_VSR_ADDR, MVS_P4_VSR_ADDR, port, addr);
-}
-
-static u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
-{
- return mvs_read_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port);
-}
-
-static void mvs_write_port_irq_stat(struct mvs_info *mvi, u32 port, u32 val)
-{
- mvs_write_port(mvi, MVS_P0_INT_STAT, MVS_P4_INT_STAT, port, val);
-}
-
-static u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
-{
- return mvs_read_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port);
-}
-
-static void mvs_write_port_irq_mask(struct mvs_info *mvi, u32 port, u32 val)
-{
- mvs_write_port(mvi, MVS_P0_INT_MASK, MVS_P4_INT_MASK, port, val);
-}
-
-static void __devinit mvs_phy_hacks(struct mvs_info *mvi)
-{
- void __iomem *regs = mvi->regs;
- u32 tmp;
-
- /* workaround for SATA R-ERR, to ignore phy glitch */
- tmp = mvs_cr32(regs, CMD_PHY_TIMER);
- tmp &= ~(1 << 9);
- tmp |= (1 << 10);
- mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
- /* enable retry 127 times */
- mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
-
- /* extend open frame timeout to max */
- tmp = mvs_cr32(regs, CMD_SAS_CTL0);
- tmp &= ~0xffff;
- tmp |= 0x3fff;
- mvs_cw32(regs, CMD_SAS_CTL0, tmp);
-
- /* workaround for WDTIMEOUT , set to 550 ms */
- mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
-
- /* not to halt for different port op during wideport link change */
- mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
-
- /* workaround for Seagate disk not-found OOB sequence, recv
- * COMINIT before sending out COMWAKE */
- tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
- tmp &= 0x0000ffff;
- tmp |= 0x00fa0000;
- mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
-
- tmp = mvs_cr32(regs, CMD_PHY_TIMER);
- tmp &= 0x1fffffff;
- tmp |= (2U << 29); /* 8 ms retry */
- mvs_cw32(regs, CMD_PHY_TIMER, tmp);
-
- /* TEST - for phy decoding error, adjust voltage levels */
- mw32(P0_VSR_ADDR + 0, 0x8);
- mw32(P0_VSR_DATA + 0, 0x2F0);
-
- mw32(P0_VSR_ADDR + 8, 0x8);
- mw32(P0_VSR_DATA + 8, 0x2F0);
-
- mw32(P0_VSR_ADDR + 16, 0x8);
- mw32(P0_VSR_DATA + 16, 0x2F0);
-
- mw32(P0_VSR_ADDR + 24, 0x8);
- mw32(P0_VSR_DATA + 24, 0x2F0);
-
-}
-
-static void mvs_enable_xmt(struct mvs_info *mvi, int PhyId)
-{
- void __iomem *regs = mvi->regs;
- u32 tmp;
-
- tmp = mr32(PCS);
- if (mvi->chip->n_phy <= 4)
- tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT);
- else
- tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT2);
- mw32(PCS, tmp);
-}
-
-static void mvs_detect_porttype(struct mvs_info *mvi, int i)
-{
- void __iomem *regs = mvi->regs;
- u32 reg;
- struct mvs_phy *phy = &mvi->phy[i];
-
- /* TODO check & save device type */
- reg = mr32(GBL_PORT_TYPE);
-
- if (reg & MODE_SAS_SATA & (1 << i))
- phy->phy_type |= PORT_TYPE_SAS;
- else
- phy->phy_type |= PORT_TYPE_SATA;
-}
-
-static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
-{
- u32 *s = (u32 *) buf;
-
- if (!s)
- return NULL;
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
- s[3] = mvs_read_port_cfg_data(mvi, i);
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
- s[2] = mvs_read_port_cfg_data(mvi, i);
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
- s[1] = mvs_read_port_cfg_data(mvi, i);
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
- s[0] = mvs_read_port_cfg_data(mvi, i);
-
- return (void *)s;
-}
-
-static u32 mvs_is_sig_fis_received(u32 irq_status)
-{
- return irq_status & PHYEV_SIG_FIS;
-}
-
-static void mvs_update_wideport(struct mvs_info *mvi, int i)
-{
- struct mvs_phy *phy = &mvi->phy[i];
- struct mvs_port *port = phy->port;
- int j, no;
-
- for_each_phy(port->wide_port_phymap, no, j, mvi->chip->n_phy)
- if (no & 1) {
- mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
- mvs_write_port_cfg_data(mvi, no,
- port->wide_port_phymap);
- } else {
- mvs_write_port_cfg_addr(mvi, no, PHYR_WIDE_PORT);
- mvs_write_port_cfg_data(mvi, no, 0);
- }
-}
-
-static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
-{
- u32 tmp;
- struct mvs_phy *phy = &mvi->phy[i];
- struct mvs_port *port = phy->port;;
-
- tmp = mvs_read_phy_ctl(mvi, i);
-
- if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
- if (!port)
- phy->phy_attached = 1;
- return tmp;
- }
-
- if (port) {
- if (phy->phy_type & PORT_TYPE_SAS) {
- port->wide_port_phymap &= ~(1U << i);
- if (!port->wide_port_phymap)
- port->port_attached = 0;
- mvs_update_wideport(mvi, i);
- } else if (phy->phy_type & PORT_TYPE_SATA)
- port->port_attached = 0;
- mvs_free_reg_set(mvi, phy->port);
- phy->port = NULL;
- phy->phy_attached = 0;
- phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
- }
- return 0;
-}
-
-static void mvs_update_phyinfo(struct mvs_info *mvi, int i,
- int get_st)
-{
- struct mvs_phy *phy = &mvi->phy[i];
- struct pci_dev *pdev = mvi->pdev;
- u32 tmp;
- u64 tmp64;
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
- phy->dev_info = mvs_read_port_cfg_data(mvi, i);
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
- phy->dev_sas_addr = (u64) mvs_read_port_cfg_data(mvi, i) << 32;
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
- phy->dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
-
- if (get_st) {
- phy->irq_status = mvs_read_port_irq_stat(mvi, i);
- phy->phy_status = mvs_is_phy_ready(mvi, i);
- }
-
- if (phy->phy_status) {
- u32 phy_st;
- struct asd_sas_phy *sas_phy = mvi->sas.sas_phy[i];
-
- mvs_write_port_cfg_addr(mvi, i, PHYR_PHY_STAT);
- phy_st = mvs_read_port_cfg_data(mvi, i);
-
- sas_phy->linkrate =
- (phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
- PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
- phy->minimum_linkrate =
- (phy->phy_status &
- PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
- phy->maximum_linkrate =
- (phy->phy_status &
- PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
-
- if (phy->phy_type & PORT_TYPE_SAS) {
- /* Updated attached_sas_addr */
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
- phy->att_dev_sas_addr =
- (u64) mvs_read_port_cfg_data(mvi, i) << 32;
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
- phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
- mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
- phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
- phy->identify.device_type =
- phy->att_dev_info & PORT_DEV_TYPE_MASK;
-
- if (phy->identify.device_type == SAS_END_DEV)
- phy->identify.target_port_protocols =
- SAS_PROTOCOL_SSP;
- else if (phy->identify.device_type != NO_DEVICE)
- phy->identify.target_port_protocols =
- SAS_PROTOCOL_SMP;
- if (phy_st & PHY_OOB_DTCTD)
- sas_phy->oob_mode = SAS_OOB_MODE;
- phy->frame_rcvd_size =
- sizeof(struct sas_identify_frame);
- } else if (phy->phy_type & PORT_TYPE_SATA) {
- phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
- if (mvs_is_sig_fis_received(phy->irq_status)) {
- phy->att_dev_sas_addr = i; /* temp */
- if (phy_st & PHY_OOB_DTCTD)
- sas_phy->oob_mode = SATA_OOB_MODE;
- phy->frame_rcvd_size =
- sizeof(struct dev_to_host_fis);
- mvs_get_d2h_reg(mvi, i,
- (void *)sas_phy->frame_rcvd);
- } else {
- dev_printk(KERN_DEBUG, &pdev->dev,
- "No sig fis\n");
- phy->phy_type &= ~(PORT_TYPE_SATA);
- goto out_done;
- }
- }
- tmp64 = cpu_to_be64(phy->att_dev_sas_addr);
- memcpy(sas_phy->attached_sas_addr, &tmp64, SAS_ADDR_SIZE);
-
- dev_printk(KERN_DEBUG, &pdev->dev,
- "phy[%d] Get Attached Address 0x%llX ,"
- " SAS Address 0x%llX\n",
- i,
- (unsigned long long)phy->att_dev_sas_addr,
- (unsigned long long)phy->dev_sas_addr);
- dev_printk(KERN_DEBUG, &pdev->dev,
- "Rate = %x , type = %d\n",
- sas_phy->linkrate, phy->phy_type);
-
- /* workaround for HW phy decoding error on 1.5g disk drive */
- mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
- tmp = mvs_read_port_vsr_data(mvi, i);
- if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
- PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
- SAS_LINK_RATE_1_5_GBPS)
- tmp &= ~PHY_MODE6_LATECLK;
- else
- tmp |= PHY_MODE6_LATECLK;
- mvs_write_port_vsr_data(mvi, i, tmp);
-
- }
-out_done:
- if (get_st)
- mvs_write_port_irq_stat(mvi, i, phy->irq_status);
-}
-
-static void mvs_port_formed(struct asd_sas_phy *sas_phy)
-{
- struct sas_ha_struct *sas_ha = sas_phy->ha;
- struct mvs_info *mvi = sas_ha->lldd_ha;
- struct asd_sas_port *sas_port = sas_phy->port;
- struct mvs_phy *phy = sas_phy->lldd_phy;
- struct mvs_port *port = &mvi->port[sas_port->id];
- unsigned long flags;
-
- spin_lock_irqsave(&mvi->lock, flags);
- port->port_attached = 1;
- phy->port = port;
- port->taskfileset = MVS_ID_NOT_MAPPED;
- if (phy->phy_type & PORT_TYPE_SAS) {
- port->wide_port_phymap = sas_port->phy_mask;
- mvs_update_wideport(mvi, sas_phy->id);
- }
- spin_unlock_irqrestore(&mvi->lock, flags);
-}
-
-static int mvs_I_T_nexus_reset(struct domain_device *dev)
-{
- return TMF_RESP_FUNC_FAILED;
-}
-
-static int __devinit mvs_hw_init(struct mvs_info *mvi)
-{
- void __iomem *regs = mvi->regs;
- int i;
- u32 tmp, cctl;
-
- /* make sure interrupts are masked immediately (paranoia) */
- mw32(GBL_CTL, 0);
- tmp = mr32(GBL_CTL);
-
- /* Reset Controller */
- if (!(tmp & HBA_RST)) {
- if (mvi->flags & MVF_PHY_PWR_FIX) {
- pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
- tmp &= ~PCTL_PWR_ON;
- tmp |= PCTL_OFF;
- pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
- pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
- tmp &= ~PCTL_PWR_ON;
- tmp |= PCTL_OFF;
- pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
- }
-
- /* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
- mw32_f(GBL_CTL, HBA_RST);
- }
-
- /* wait for reset to finish; timeout is just a guess */
- i = 1000;
- while (i-- > 0) {
- msleep(10);
-
- if (!(mr32(GBL_CTL) & HBA_RST))
- break;
- }
- if (mr32(GBL_CTL) & HBA_RST) {
- dev_printk(KERN_ERR, &mvi->pdev->dev, "HBA reset failed\n");
- return -EBUSY;
- }
-
- /* Init Chip */
- /* make sure RST is set; HBA_RST /should/ have done that for us */
- cctl = mr32(CTL);
- if (cctl & CCTL_RST)
- cctl &= ~CCTL_RST;
- else
- mw32_f(CTL, cctl | CCTL_RST);
-
- /* write to device control _AND_ device status register? - A.C. */
- pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
- tmp &= ~PRD_REQ_MASK;
- tmp |= PRD_REQ_SIZE;
- pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
-
- pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
- tmp |= PCTL_PWR_ON;
- tmp &= ~PCTL_OFF;
- pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
-
- pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
- tmp |= PCTL_PWR_ON;
- tmp &= ~PCTL_OFF;
- pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
-
- mw32_f(CTL, cctl);
-
- /* reset control */
- mw32(PCS, 0); /*MVS_PCS */
-
- mvs_phy_hacks(mvi);
-
- mw32(CMD_LIST_LO, mvi->slot_dma);
- mw32(CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
-
- mw32(RX_FIS_LO, mvi->rx_fis_dma);
- mw32(RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
-
- mw32(TX_CFG, MVS_CHIP_SLOT_SZ);
- mw32(TX_LO, mvi->tx_dma);
- mw32(TX_HI, (mvi->tx_dma >> 16) >> 16);
-
- mw32(RX_CFG, MVS_RX_RING_SZ);
- mw32(RX_LO, mvi->rx_dma);
- mw32(RX_HI, (mvi->rx_dma >> 16) >> 16);
-
- /* enable auto port detection */
- mw32(GBL_PORT_TYPE, MODE_AUTO_DET_EN);
- msleep(1100);
- /* init and reset phys */
- for (i = 0; i < mvi->chip->n_phy; i++) {
- u32 lo = be32_to_cpu(*(u32 *)&mvi->sas_addr[4]);
- u32 hi = be32_to_cpu(*(u32 *)&mvi->sas_addr[0]);
-
- mvs_detect_porttype(mvi, i);
-
- /* set phy local SAS address */
- mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_LO);
- mvs_write_port_cfg_data(mvi, i, lo);
- mvs_write_port_cfg_addr(mvi, i, PHYR_ADDR_HI);
- mvs_write_port_cfg_data(mvi, i, hi);
-
- /* reset phy */
- tmp = mvs_read_phy_ctl(mvi, i);
- tmp |= PHY_RST;
- mvs_write_phy_ctl(mvi, i, tmp);
- }
-
- msleep(100);
-
- for (i = 0; i < mvi->chip->n_phy; i++) {
- /* clear phy int status */
- tmp = mvs_read_port_irq_stat(mvi, i);
- tmp &= ~PHYEV_SIG_FIS;
- mvs_write_port_irq_stat(mvi, i, tmp);
-
- /* set phy int mask */
- tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
- PHYEV_ID_DONE | PHYEV_DEC_ERR;
- mvs_write_port_irq_mask(mvi, i, tmp);
-
- msleep(100);
- mvs_update_phyinfo(mvi, i, 1);
- mvs_enable_xmt(mvi, i);
- }
-
- /* FIXME: update wide port bitmaps */
-
- /* little endian for open address and command table, etc. */
- /* A.C.
- * it seems that ( from the spec ) turning on big-endian won't
- * do us any good on big-endian machines, need further confirmation
- */
- cctl = mr32(CTL);
- cctl |= CCTL_ENDIAN_CMD;
- cctl |= CCTL_ENDIAN_DATA;
- cctl &= ~CCTL_ENDIAN_OPEN;
- cctl |= CCTL_ENDIAN_RSP;
- mw32_f(CTL, cctl);
-
- /* reset CMD queue */
- tmp = mr32(PCS);
- tmp |= PCS_CMD_RST;
- mw32(PCS, tmp);
- /* interrupt coalescing may cause missing HW interrput in some case,
- * and the max count is 0x1ff, while our max slot is 0x200,
- * it will make count 0.
- */
- tmp = 0;
- mw32(INT_COAL, tmp);
-
- tmp = 0x100;
- mw32(INT_COAL_TMOUT, tmp);
-
- /* ladies and gentlemen, start your engines */
- mw32(TX_CFG, 0);
- mw32(TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
- mw32(RX_CFG, MVS_RX_RING_SZ | RX_EN);
- /* enable CMD/CMPL_Q/RESP mode */
- mw32(PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN | PCS_CMD_EN);
-
- /* enable completion queue interrupt */
- tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS);
- mw32(INT_MASK, tmp);
-
- /* Enable SRS interrupt */
- mw32(INT_MASK_SRS, 0xFF);
- return 0;
-}
-
-static void __devinit mvs_print_info(struct mvs_info *mvi)
-{
- struct pci_dev *pdev = mvi->pdev;
- static int printed_version;
-
- if (!printed_version++)
- dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
-
- dev_printk(KERN_INFO, &pdev->dev, "%u phys, addr %llx\n",
- mvi->chip->n_phy, SAS_ADDR(mvi->sas_addr));
-}
-
-static int __devinit mvs_pci_init(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- int rc;
- struct mvs_info *mvi;
- irq_handler_t irq_handler = mvs_interrupt;
-
- rc = pci_enable_device(pdev);
- if (rc)
- return rc;
-
- pci_set_master(pdev);
-
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
- goto err_out_disable;
-
- rc = pci_go_64(pdev);
- if (rc)
- goto err_out_regions;
-
- mvi = mvs_alloc(pdev, ent);
- if (!mvi) {
- rc = -ENOMEM;
- goto err_out_regions;
- }
-
- rc = mvs_hw_init(mvi);
- if (rc)
- goto err_out_mvi;
-
-#ifndef MVS_DISABLE_MSI
- if (!pci_enable_msi(pdev)) {
- u32 tmp;
- void __iomem *regs = mvi->regs;
- mvi->flags |= MVF_MSI;
- irq_handler = mvs_msi_interrupt;
- tmp = mr32(PCS);
- mw32(PCS, tmp | PCS_SELF_CLEAR);
- }
-#endif
-
- rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME, mvi);
- if (rc)
- goto err_out_msi;
-
- rc = scsi_add_host(mvi->shost, &pdev->dev);
- if (rc)
- goto err_out_irq;
-
- rc = sas_register_ha(&mvi->sas);
- if (rc)
- goto err_out_shost;
-
- pci_set_drvdata(pdev, mvi);
-
- mvs_print_info(mvi);
-
- mvs_hba_interrupt_enable(mvi);
-
- scsi_scan_host(mvi->shost);
-
- return 0;
-
-err_out_shost:
- scsi_remove_host(mvi->shost);
-err_out_irq:
- free_irq(pdev->irq, mvi);
-err_out_msi:
- if (mvi->flags |= MVF_MSI)
- pci_disable_msi(pdev);
-err_out_mvi:
- mvs_free(mvi);
-err_out_regions:
- pci_release_regions(pdev);
-err_out_disable:
- pci_disable_device(pdev);
- return rc;
-}
-
-static void __devexit mvs_pci_remove(struct pci_dev *pdev)
-{
- struct mvs_info *mvi = pci_get_drvdata(pdev);
-
- pci_set_drvdata(pdev, NULL);
-
- if (mvi) {
- sas_unregister_ha(&mvi->sas);
- mvs_hba_interrupt_disable(mvi);
- sas_remove_host(mvi->shost);
- scsi_remove_host(mvi->shost);
-
- free_irq(pdev->irq, mvi);
- if (mvi->flags & MVF_MSI)
- pci_disable_msi(pdev);
- mvs_free(mvi);
- pci_release_regions(pdev);
- }
- pci_disable_device(pdev);
-}
-
-static struct sas_domain_function_template mvs_transport_ops = {
- .lldd_execute_task = mvs_task_exec,
- .lldd_control_phy = mvs_phy_control,
- .lldd_abort_task = mvs_task_abort,
- .lldd_port_formed = mvs_port_formed,
- .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset,
-};
-
-static struct pci_device_id __devinitdata mvs_pci_table[] = {
- { PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
- { PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
- {
- .vendor = PCI_VENDOR_ID_MARVELL,
- .device = 0x6440,
- .subvendor = PCI_ANY_ID,
- .subdevice = 0x6480,
- .class = 0,
- .class_mask = 0,
- .driver_data = chip_6480,
- },
- { PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
- { PCI_VDEVICE(MARVELL, 0x6480), chip_6480 },
-
- { } /* terminate list */
-};
-
-static struct pci_driver mvs_pci_driver = {
- .name = DRV_NAME,
- .id_table = mvs_pci_table,
- .probe = mvs_pci_init,
- .remove = __devexit_p(mvs_pci_remove),
-};
-
-static int __init mvs_init(void)
-{
- int rc;
-
- mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
- if (!mvs_stt)
- return -ENOMEM;
-
- rc = pci_register_driver(&mvs_pci_driver);
- if (rc)
- goto err_out;
-
- return 0;
-
-err_out:
- sas_release_transport(mvs_stt);
- return rc;
-}
-
-static void __exit mvs_exit(void)
-{
- pci_unregister_driver(&mvs_pci_driver);
- sas_release_transport(mvs_stt);
-}
-
-module_init(mvs_init);
-module_exit(mvs_exit);
-
-MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
-MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(pci, mvs_pci_table);
diff --git a/drivers/scsi/mvsas/Kconfig b/drivers/scsi/mvsas/Kconfig
new file mode 100644
index 0000000..6de7af2
--- /dev/null
+++ b/drivers/scsi/mvsas/Kconfig
@@ -0,0 +1,42 @@
+#
+# Kernel configuration file for 88SE64XX/88SE94XX SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This file is part of the 88SE64XX/88SE94XX driver.
+#
+# The 88SE64XX/88SE94XX driver is free software; you can redistribute
+# it and/or modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 2 of the
+# License.
+#
+# The 88SE64XX/88SE94XX driver is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with 88SE64XX/88SE94XX Driver; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#
+#
+
+config SCSI_MVSAS
+ tristate "Marvell 88SE64XX/88SE94XX SAS/SATA support"
+ depends on PCI
+ select SCSI_SAS_LIBSAS
+ select FW_LOADER
+ help
+ This driver supports Marvell's SAS/SATA 3Gb/s PCI-E 88SE64XX and 6Gb/s
+ PCI-E 88SE94XX chip based host adapters.
+
+config SCSI_MVSAS_DEBUG
+ bool "Compile in debug mode"
+ default y
+ depends on SCSI_MVSAS
+ help
+ Compiles the 88SE64XX/88SE94XX driver in debug mode. In debug mode,
+ the driver prints some messages to the console.
diff --git a/drivers/scsi/mvsas/Makefile b/drivers/scsi/mvsas/Makefile
new file mode 100644
index 0000000..52ac426
--- /dev/null
+++ b/drivers/scsi/mvsas/Makefile
@@ -0,0 +1,32 @@
+#
+# Makefile for Marvell 88SE64xx/88SE84xx SAS/SATA driver.
+#
+# Copyright 2007 Red Hat, Inc.
+# Copyright 2008 Marvell. <kewei@marvell.com>
+#
+# This file is licensed under GPLv2.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+# USA
+
+ifeq ($(CONFIG_SCSI_MVSAS_DEBUG),y)
+ EXTRA_CFLAGS += -DMV_DEBUG
+endif
+
+obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
+mvsas-y += mv_init.o \
+ mv_sas.o \
+ mv_64xx.o \
+ mv_94xx.o
diff --git a/drivers/scsi/mvsas/mv_64xx.c b/drivers/scsi/mvsas/mv_64xx.c
new file mode 100644
index 0000000..10a5077
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.c
@@ -0,0 +1,793 @@
+/*
+ * Marvell 88SE64xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_64xx.h"
+#include "mv_chips.h"
+
+static void mvs_64xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+ void __iomem *regs = mvi->regs;
+ u32 reg;
+ struct mvs_phy *phy = &mvi->phy[i];
+
+ /* TODO check & save device type */
+ reg = mr32(MVS_GBL_PORT_TYPE);
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ if (reg & MODE_SAS_SATA & (1 << i))
+ phy->phy_type |= PORT_TYPE_SAS;
+ else
+ phy->phy_type |= PORT_TYPE_SATA;
+}
+
+static void __devinit mvs_64xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ tmp = mr32(MVS_PCS);
+ if (mvi->chip->n_phy <= 4)
+ tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT);
+ else
+ tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+ mw32(MVS_PCS, tmp);
+}
+
+static void __devinit mvs_64xx_phy_hacks(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+
+ mvs_phy_hacks(mvi);
+
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ /* TEST - for phy decoding error, adjust voltage levels */
+ mw32(MVS_P0_VSR_ADDR + 0, 0x8);
+ mw32(MVS_P0_VSR_DATA + 0, 0x2F0);
+
+ mw32(MVS_P0_VSR_ADDR + 8, 0x8);
+ mw32(MVS_P0_VSR_DATA + 8, 0x2F0);
+
+ mw32(MVS_P0_VSR_ADDR + 16, 0x8);
+ mw32(MVS_P0_VSR_DATA + 16, 0x2F0);
+
+ mw32(MVS_P0_VSR_ADDR + 24, 0x8);
+ mw32(MVS_P0_VSR_DATA + 24, 0x2F0);
+ } else {
+ int i;
+ /* disable auto port detection */
+ mw32(MVS_GBL_PORT_TYPE, 0);
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE7);
+ mvs_write_port_vsr_data(mvi, i, 0x90000000);
+ mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE9);
+ mvs_write_port_vsr_data(mvi, i, 0x50f2);
+ mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE11);
+ mvs_write_port_vsr_data(mvi, i, 0x0e);
+ }
+ }
+}
+
+static void mvs_64xx_stp_reset(struct mvs_info *mvi, u32 phy_id)
+{
+ void __iomem *regs = mvi->regs;
+ u32 reg, tmp;
+
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ if (phy_id < 4)
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, ®);
+ else
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, ®);
+
+ } else
+ reg = mr32(MVS_PHY_CTL);
+
+ tmp = reg;
+ if (phy_id < 4)
+ tmp |= (1U << phy_id) << PCTL_LINK_OFFS;
+ else
+ tmp |= (1U << (phy_id - 4)) << PCTL_LINK_OFFS;
+
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ if (phy_id < 4) {
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+ mdelay(10);
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, reg);
+ } else {
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+ mdelay(10);
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, reg);
+ }
+ } else {
+ mw32(MVS_PHY_CTL, tmp);
+ mdelay(10);
+ mw32(MVS_PHY_CTL, reg);
+ }
+}
+
+static void mvs_64xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+ u32 tmp;
+ tmp = mvs_read_port_irq_stat(mvi, phy_id);
+ tmp &= ~PHYEV_RDY_CH;
+ mvs_write_port_irq_stat(mvi, phy_id, tmp);
+ tmp = mvs_read_phy_ctl(mvi, phy_id);
+ if (hard)
+ tmp |= PHY_RST_HARD;
+ else
+ tmp |= PHY_RST;
+ mvs_write_phy_ctl(mvi, phy_id, tmp);
+ if (hard) {
+ do {
+ tmp = mvs_read_phy_ctl(mvi, phy_id);
+ } while (tmp & PHY_RST_HARD);
+ }
+}
+
+static int __devinit mvs_64xx_chip_reset(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+ int i;
+
+ /* make sure interrupts are masked immediately (paranoia) */
+ mw32(MVS_GBL_CTL, 0);
+ tmp = mr32(MVS_GBL_CTL);
+
+ /* Reset Controller */
+ if (!(tmp & HBA_RST)) {
+ if (mvi->flags & MVF_PHY_PWR_FIX) {
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+ tmp &= ~PCTL_PWR_OFF;
+ tmp |= PCTL_PHY_DSBL;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+ tmp &= ~PCTL_PWR_OFF;
+ tmp |= PCTL_PHY_DSBL;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+ }
+ }
+
+ /* make sure interrupts are masked immediately (paranoia) */
+ mw32(MVS_GBL_CTL, 0);
+ tmp = mr32(MVS_GBL_CTL);
+
+ /* Reset Controller */
+ if (!(tmp & HBA_RST)) {
+ /* global reset, incl. COMRESET/H_RESET_N (self-clearing) */
+ mw32_f(MVS_GBL_CTL, HBA_RST);
+ }
+
+ /* wait for reset to finish; timeout is just a guess */
+ i = 1000;
+ while (i-- > 0) {
+ msleep(10);
+
+ if (!(mr32(MVS_GBL_CTL) & HBA_RST))
+ break;
+ }
+ if (mr32(MVS_GBL_CTL) & HBA_RST) {
+ dev_printk(KERN_ERR, mvi->dev, "HBA reset failed\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static void mvs_64xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ u32 offs;
+ if (phy_id < 4)
+ offs = PCR_PHY_CTL;
+ else {
+ offs = PCR_PHY_CTL2;
+ phy_id -= 4;
+ }
+ pci_read_config_dword(mvi->pdev, offs, &tmp);
+ tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+ pci_write_config_dword(mvi->pdev, offs, tmp);
+ } else {
+ tmp = mr32(MVS_PHY_CTL);
+ tmp |= 1U << (PCTL_PHY_DSBL_OFFS + phy_id);
+ mw32(MVS_PHY_CTL, tmp);
+ }
+}
+
+static void mvs_64xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ u32 offs;
+ if (phy_id < 4)
+ offs = PCR_PHY_CTL;
+ else {
+ offs = PCR_PHY_CTL2;
+ phy_id -= 4;
+ }
+ pci_read_config_dword(mvi->pdev, offs, &tmp);
+ tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+ pci_write_config_dword(mvi->pdev, offs, tmp);
+ } else {
+ tmp = mr32(MVS_PHY_CTL);
+ tmp &= ~(1U << (PCTL_PHY_DSBL_OFFS + phy_id));
+ mw32(MVS_PHY_CTL, tmp);
+ }
+}
+
+static int __devinit mvs_64xx_init(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ int i;
+ u32 tmp, cctl;
+
+ if (mvi->pdev && mvi->pdev->revision == 0)
+ mvi->flags |= MVF_PHY_PWR_FIX;
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ mvs_show_pcie_usage(mvi);
+ tmp = mvs_64xx_chip_reset(mvi);
+ if (tmp)
+ return tmp;
+ } else {
+ tmp = mr32(MVS_PHY_CTL);
+ tmp &= ~PCTL_PWR_OFF;
+ tmp |= PCTL_PHY_DSBL;
+ mw32(MVS_PHY_CTL, tmp);
+ }
+
+ /* Init Chip */
+ /* make sure RST is set; HBA_RST /should/ have done that for us */
+ cctl = mr32(MVS_CTL) & 0xFFFF;
+ if (cctl & CCTL_RST)
+ cctl &= ~CCTL_RST;
+ else
+ mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ /* write to device control _AND_ device status register */
+ pci_read_config_dword(mvi->pdev, PCR_DEV_CTRL, &tmp);
+ tmp &= ~PRD_REQ_MASK;
+ tmp |= PRD_REQ_SIZE;
+ pci_write_config_dword(mvi->pdev, PCR_DEV_CTRL, tmp);
+
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL, &tmp);
+ tmp &= ~PCTL_PWR_OFF;
+ tmp &= ~PCTL_PHY_DSBL;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL, tmp);
+
+ pci_read_config_dword(mvi->pdev, PCR_PHY_CTL2, &tmp);
+ tmp &= PCTL_PWR_OFF;
+ tmp &= ~PCTL_PHY_DSBL;
+ pci_write_config_dword(mvi->pdev, PCR_PHY_CTL2, tmp);
+ } else {
+ tmp = mr32(MVS_PHY_CTL);
+ tmp &= ~PCTL_PWR_OFF;
+ tmp |= PCTL_COM_ON;
+ tmp &= ~PCTL_PHY_DSBL;
+ tmp |= PCTL_LINK_RST;
+ mw32(MVS_PHY_CTL, tmp);
+ msleep(100);
+ tmp &= ~PCTL_LINK_RST;
+ mw32(MVS_PHY_CTL, tmp);
+ msleep(100);
+ }
+
+ /* reset control */
+ mw32(MVS_PCS, 0); /* MVS_PCS */
+ /* init phys */
+ mvs_64xx_phy_hacks(mvi);
+
+ /* enable auto port detection */
+ mw32(MVS_GBL_PORT_TYPE, MODE_AUTO_DET_EN);
+
+ mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+ mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+ mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+ mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+ mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+ mw32(MVS_TX_LO, mvi->tx_dma);
+ mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+ mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+ mw32(MVS_RX_LO, mvi->rx_dma);
+ mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ /* set phy local SAS address */
+ /* should set little endian SAS address to 64xx chip */
+ mvs_set_sas_addr(mvi, i, PHYR_ADDR_LO, PHYR_ADDR_HI,
+ cpu_to_be64(mvi->phy[i].dev_sas_addr));
+
+ mvs_64xx_enable_xmt(mvi, i);
+
+ mvs_64xx_phy_reset(mvi, i, 1);
+ msleep(500);
+ mvs_64xx_detect_porttype(mvi, i);
+ }
+ if (mvi->flags & MVF_FLAG_SOC) {
+ /* set select registers */
+ writel(0x0E008000, regs + 0x000);
+ writel(0x59000008, regs + 0x004);
+ writel(0x20, regs + 0x008);
+ writel(0x20, regs + 0x00c);
+ writel(0x20, regs + 0x010);
+ writel(0x20, regs + 0x014);
+ writel(0x20, regs + 0x018);
+ writel(0x20, regs + 0x01c);
+ }
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ /* clear phy int status */
+ tmp = mvs_read_port_irq_stat(mvi, i);
+ tmp &= ~PHYEV_SIG_FIS;
+ mvs_write_port_irq_stat(mvi, i, tmp);
+
+ /* set phy int mask */
+ tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH | PHYEV_UNASSOC_FIS |
+ PHYEV_ID_DONE | PHYEV_DCDR_ERR | PHYEV_CRC_ERR |
+ PHYEV_DEC_ERR;
+ mvs_write_port_irq_mask(mvi, i, tmp);
+
+ msleep(100);
+ mvs_update_phyinfo(mvi, i, 1);
+ }
+
+ /* FIXME: update wide port bitmaps */
+
+ /* little endian for open address and command table, etc. */
+ /*
+ * it seems that ( from the spec ) turning on big-endian won't
+ * do us any good on big-endian machines, need further confirmation
+ */
+ cctl = mr32(MVS_CTL);
+ cctl |= CCTL_ENDIAN_CMD;
+ cctl |= CCTL_ENDIAN_DATA;
+ cctl &= ~CCTL_ENDIAN_OPEN;
+ cctl |= CCTL_ENDIAN_RSP;
+ mw32_f(MVS_CTL, cctl);
+
+ /* reset CMD queue */
+ tmp = mr32(MVS_PCS);
+ tmp |= PCS_CMD_RST;
+ mw32(MVS_PCS, tmp);
+ /* interrupt coalescing may cause missing HW interrput in some case,
+ * and the max count is 0x1ff, while our max slot is 0x200,
+ * it will make count 0.
+ */
+ tmp = 0;
+ mw32(MVS_INT_COAL, tmp);
+
+ tmp = 0x100;
+ mw32(MVS_INT_COAL_TMOUT, tmp);
+
+ /* ladies and gentlemen, start your engines */
+ mw32(MVS_TX_CFG, 0);
+ mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+ mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+ /* enable CMD/CMPL_Q/RESP mode */
+ mw32(MVS_PCS, PCS_SATA_RETRY | PCS_FIS_RX_EN |
+ PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+ /* enable completion queue interrupt */
+ tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+ CINT_DMA_PCIE);
+
+ mw32(MVS_INT_MASK, tmp);
+
+ /* Enable SRS interrupt */
+ mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+ return 0;
+}
+
+static int mvs_64xx_ioremap(struct mvs_info *mvi)
+{
+ if (!mvs_ioremap(mvi, 4, 2))
+ return 0;
+ return -1;
+}
+
+static void mvs_64xx_iounmap(struct mvs_info *mvi)
+{
+ mvs_iounmap(mvi->regs);
+ mvs_iounmap(mvi->regs_ex);
+}
+
+static void mvs_64xx_interrupt_enable(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ tmp = mr32(MVS_GBL_CTL);
+ mw32(MVS_GBL_CTL, tmp | INT_EN);
+}
+
+static void mvs_64xx_interrupt_disable(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ tmp = mr32(MVS_GBL_CTL);
+ mw32(MVS_GBL_CTL, tmp & ~INT_EN);
+}
+
+static u32 mvs_64xx_isr_status(struct mvs_info *mvi, int irq)
+{
+ void __iomem *regs = mvi->regs;
+ u32 stat;
+
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ stat = mr32(MVS_GBL_INT_STAT);
+
+ if (stat == 0 || stat == 0xffffffff)
+ return 0;
+ } else
+ stat = 1;
+ return stat;
+}
+
+static irqreturn_t mvs_64xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+ void __iomem *regs = mvi->regs;
+
+ /* clear CMD_CMPLT ASAP */
+ mw32_f(MVS_INT_STAT, CINT_DONE);
+#ifndef MVS_USE_TASKLET
+ spin_lock(&mvi->lock);
+#endif
+ mvs_int_full(mvi);
+#ifndef MVS_USE_TASKLET
+ spin_unlock(&mvi->lock);
+#endif
+ return IRQ_HANDLED;
+}
+
+static void mvs_64xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+ u32 tmp;
+ mvs_cw32(mvi, 0x40 + (slot_idx >> 3), 1 << (slot_idx % 32));
+ mvs_cw32(mvi, 0x00 + (slot_idx >> 3), 1 << (slot_idx % 32));
+ do {
+ tmp = mvs_cr32(mvi, 0x00 + (slot_idx >> 3));
+ } while (tmp & 1 << (slot_idx % 32));
+ do {
+ tmp = mvs_cr32(mvi, 0x40 + (slot_idx >> 3));
+ } while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_64xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+ u32 tfs)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ if (type == PORT_TYPE_SATA) {
+ tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+ mw32(MVS_INT_STAT_SRS_0, tmp);
+ }
+ mw32(MVS_INT_STAT, CINT_CI_STOP);
+ tmp = mr32(MVS_PCS) | 0xFF00;
+ mw32(MVS_PCS, tmp);
+}
+
+static void mvs_64xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp, offs;
+
+ if (*tfs == MVS_ID_NOT_MAPPED)
+ return;
+
+ offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+ if (*tfs < 16) {
+ tmp = mr32(MVS_PCS);
+ mw32(MVS_PCS, tmp & ~offs);
+ } else {
+ tmp = mr32(MVS_CTL);
+ mw32(MVS_CTL, tmp & ~offs);
+ }
+
+ tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << *tfs);
+ if (tmp)
+ mw32(MVS_INT_STAT_SRS_0, tmp);
+
+ *tfs = MVS_ID_NOT_MAPPED;
+ return;
+}
+
+static u8 mvs_64xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+ int i;
+ u32 tmp, offs;
+ void __iomem *regs = mvi->regs;
+
+ if (*tfs != MVS_ID_NOT_MAPPED)
+ return 0;
+
+ tmp = mr32(MVS_PCS);
+
+ for (i = 0; i < mvi->chip->srs_sz; i++) {
+ if (i == 16)
+ tmp = mr32(MVS_CTL);
+ offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+ if (!(tmp & offs)) {
+ *tfs = i;
+
+ if (i < 16)
+ mw32(MVS_PCS, tmp | offs);
+ else
+ mw32(MVS_CTL, tmp | offs);
+ tmp = mr32(MVS_INT_STAT_SRS_0) & (1U << i);
+ if (tmp)
+ mw32(MVS_INT_STAT_SRS_0, tmp);
+ return 0;
+ }
+ }
+ return MVS_ID_NOT_MAPPED;
+}
+
+void mvs_64xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+ int i;
+ struct scatterlist *sg;
+ struct mvs_prd *buf_prd = prd;
+ for_each_sg(scatter, sg, nr, i) {
+ buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+ buf_prd->len = cpu_to_le32(sg_dma_len(sg));
+ buf_prd++;
+ }
+}
+
+static int mvs_64xx_oob_done(struct mvs_info *mvi, int i)
+{
+ u32 phy_st;
+ mvs_write_port_cfg_addr(mvi, i,
+ PHYR_PHY_STAT);
+ phy_st = mvs_read_port_cfg_data(mvi, i);
+ if (phy_st & PHY_OOB_DTCTD)
+ return 1;
+ return 0;
+}
+
+static void mvs_64xx_fix_phy_info(struct mvs_info *mvi, int i,
+ struct sas_identify_frame *id)
+
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ sas_phy->linkrate =
+ (phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+
+ phy->minimum_linkrate =
+ (phy->phy_status &
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK) >> 8;
+ phy->maximum_linkrate =
+ (phy->phy_status &
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK) >> 12;
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_IDENTIFY);
+ phy->dev_info = mvs_read_port_cfg_data(mvi, i);
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_DEV_INFO);
+ phy->att_dev_info = mvs_read_port_cfg_data(mvi, i);
+
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_HI);
+ phy->att_dev_sas_addr =
+ (u64) mvs_read_port_cfg_data(mvi, i) << 32;
+ mvs_write_port_cfg_addr(mvi, i, PHYR_ATT_ADDR_LO);
+ phy->att_dev_sas_addr |= mvs_read_port_cfg_data(mvi, i);
+ phy->att_dev_sas_addr = SAS_ADDR(&phy->att_dev_sas_addr);
+}
+
+static void mvs_64xx_phy_work_around(struct mvs_info *mvi, int i)
+{
+ u32 tmp;
+ struct mvs_phy *phy = &mvi->phy[i];
+ /* workaround for HW phy decoding error on 1.5g disk drive */
+ mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE6);
+ tmp = mvs_read_port_vsr_data(mvi, i);
+ if (((phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET) ==
+ SAS_LINK_RATE_1_5_GBPS)
+ tmp &= ~PHY_MODE6_LATECLK;
+ else
+ tmp |= PHY_MODE6_LATECLK;
+ mvs_write_port_vsr_data(mvi, i, tmp);
+}
+
+void mvs_64xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+ struct sas_phy_linkrates *rates)
+{
+ u32 lrmin = 0, lrmax = 0;
+ u32 tmp;
+
+ tmp = mvs_read_phy_ctl(mvi, phy_id);
+ lrmin = (rates->minimum_linkrate << 8);
+ lrmax = (rates->maximum_linkrate << 12);
+
+ if (lrmin) {
+ tmp &= ~(0xf << 8);
+ tmp |= lrmin;
+ }
+ if (lrmax) {
+ tmp &= ~(0xf << 12);
+ tmp |= lrmax;
+ }
+ mvs_write_phy_ctl(mvi, phy_id, tmp);
+ mvs_64xx_phy_reset(mvi, phy_id, 1);
+}
+
+static void mvs_64xx_clear_active_cmds(struct mvs_info *mvi)
+{
+ u32 tmp;
+ void __iomem *regs = mvi->regs;
+ tmp = mr32(MVS_PCS);
+ mw32(MVS_PCS, tmp & 0xFFFF);
+ mw32(MVS_PCS, tmp);
+ tmp = mr32(MVS_CTL);
+ mw32(MVS_CTL, tmp & 0xFFFF);
+ mw32(MVS_CTL, tmp);
+}
+
+
+u32 mvs_64xx_spi_read_data(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs_ex;
+ return ior32(SPI_DATA_REG_64XX);
+}
+
+void mvs_64xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+ void __iomem *regs = mvi->regs_ex;
+ iow32(SPI_DATA_REG_64XX, data);
+}
+
+
+int mvs_64xx_spi_buildcmd(struct mvs_info *mvi,
+ u32 *dwCmd,
+ u8 cmd,
+ u8 read,
+ u8 length,
+ u32 addr
+ )
+{
+ u32 dwTmp;
+
+ dwTmp = ((u32)cmd << 24) | ((u32)length << 19);
+ if (read)
+ dwTmp |= 1U<<23;
+
+ if (addr != MV_MAX_U32) {
+ dwTmp |= 1U<<22;
+ dwTmp |= (addr & 0x0003FFFF);
+ }
+
+ *dwCmd = dwTmp;
+ return 0;
+}
+
+
+int mvs_64xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+ void __iomem *regs = mvi->regs_ex;
+ int retry;
+
+ for (retry = 0; retry < 1; retry++) {
+ iow32(SPI_CTRL_REG_64XX, SPI_CTRL_VENDOR_ENABLE);
+ iow32(SPI_CMD_REG_64XX, cmd);
+ iow32(SPI_CTRL_REG_64XX,
+ SPI_CTRL_VENDOR_ENABLE | SPI_CTRL_SPISTART);
+ }
+
+ return 0;
+}
+
+int mvs_64xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+ void __iomem *regs = mvi->regs_ex;
+ u32 i, dwTmp;
+
+ for (i = 0; i < timeout; i++) {
+ dwTmp = ior32(SPI_CTRL_REG_64XX);
+ if (!(dwTmp & SPI_CTRL_SPISTART))
+ return 0;
+ msleep(10);
+ }
+
+ return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_64xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+ int i;
+ struct mvs_prd *buf_prd = prd;
+ buf_prd += from;
+ for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+ buf_prd->addr = cpu_to_le64(buf_dma);
+ buf_prd->len = cpu_to_le32(buf_len);
+ ++buf_prd;
+ }
+}
+#endif
+
+const struct mvs_dispatch mvs_64xx_dispatch = {
+ "mv64xx",
+ mvs_64xx_init,
+ NULL,
+ mvs_64xx_ioremap,
+ mvs_64xx_iounmap,
+ mvs_64xx_isr,
+ mvs_64xx_isr_status,
+ mvs_64xx_interrupt_enable,
+ mvs_64xx_interrupt_disable,
+ mvs_read_phy_ctl,
+ mvs_write_phy_ctl,
+ mvs_read_port_cfg_data,
+ mvs_write_port_cfg_data,
+ mvs_write_port_cfg_addr,
+ mvs_read_port_vsr_data,
+ mvs_write_port_vsr_data,
+ mvs_write_port_vsr_addr,
+ mvs_read_port_irq_stat,
+ mvs_write_port_irq_stat,
+ mvs_read_port_irq_mask,
+ mvs_write_port_irq_mask,
+ mvs_get_sas_addr,
+ mvs_64xx_command_active,
+ mvs_64xx_issue_stop,
+ mvs_start_delivery,
+ mvs_rx_update,
+ mvs_int_full,
+ mvs_64xx_assign_reg_set,
+ mvs_64xx_free_reg_set,
+ mvs_get_prd_size,
+ mvs_get_prd_count,
+ mvs_64xx_make_prd,
+ mvs_64xx_detect_porttype,
+ mvs_64xx_oob_done,
+ mvs_64xx_fix_phy_info,
+ mvs_64xx_phy_work_around,
+ mvs_64xx_phy_set_link_rate,
+ mvs_hw_max_link_rate,
+ mvs_64xx_phy_disable,
+ mvs_64xx_phy_enable,
+ mvs_64xx_phy_reset,
+ mvs_64xx_stp_reset,
+ mvs_64xx_clear_active_cmds,
+ mvs_64xx_spi_read_data,
+ mvs_64xx_spi_write_data,
+ mvs_64xx_spi_buildcmd,
+ mvs_64xx_spi_issuecmd,
+ mvs_64xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ mvs_64xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_64xx.h b/drivers/scsi/mvsas/mv_64xx.h
new file mode 100644
index 0000000..42e947d
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_64xx.h
@@ -0,0 +1,151 @@
+/*
+ * Marvell 88SE64xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS64XX_REG_H_
+#define _MVS64XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE SAS_LINK_RATE_3_0_GBPS
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+ MVS_GBL_CTL = 0x04, /* global control */
+ MVS_GBL_INT_STAT = 0x08, /* global irq status */
+ MVS_GBL_PI = 0x0C, /* ports implemented bitmask */
+
+ MVS_PHY_CTL = 0x40, /* SOC PHY Control */
+ MVS_PORTS_IMP = 0x9C, /* SOC Port Implemented */
+
+ MVS_GBL_PORT_TYPE = 0xa0, /* port type */
+
+ MVS_CTL = 0x100, /* SAS/SATA port configuration */
+ MVS_PCS = 0x104, /* SAS/SATA port control/status */
+ MVS_CMD_LIST_LO = 0x108, /* cmd list addr */
+ MVS_CMD_LIST_HI = 0x10C,
+ MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */
+ MVS_RX_FIS_HI = 0x114,
+
+ MVS_TX_CFG = 0x120, /* TX configuration */
+ MVS_TX_LO = 0x124, /* TX (delivery) ring addr */
+ MVS_TX_HI = 0x128,
+
+ MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */
+ MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */
+ MVS_RX_CFG = 0x134, /* RX configuration */
+ MVS_RX_LO = 0x138, /* RX (completion) ring addr */
+ MVS_RX_HI = 0x13C,
+ MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */
+
+ MVS_INT_COAL = 0x148, /* Int coalescing config */
+ MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */
+ MVS_INT_STAT = 0x150, /* Central int status */
+ MVS_INT_MASK = 0x154, /* Central int enable */
+ MVS_INT_STAT_SRS_0 = 0x158, /* SATA register set status */
+ MVS_INT_MASK_SRS_0 = 0x15C,
+
+ /* ports 1-3 follow after this */
+ MVS_P0_INT_STAT = 0x160, /* port0 interrupt status */
+ MVS_P0_INT_MASK = 0x164, /* port0 interrupt mask */
+ /* ports 5-7 follow after this */
+ MVS_P4_INT_STAT = 0x200, /* Port4 interrupt status */
+ MVS_P4_INT_MASK = 0x204, /* Port4 interrupt enable mask */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_SER_CTLSTAT = 0x180, /* port0 serial control/status */
+ /* ports 5-7 follow after this */
+ MVS_P4_SER_CTLSTAT = 0x220, /* port4 serial control/status */
+
+ MVS_CMD_ADDR = 0x1B8, /* Command register port (addr) */
+ MVS_CMD_DATA = 0x1BC, /* Command register port (data) */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_CFG_ADDR = 0x1C0, /* port0 phy register address */
+ MVS_P0_CFG_DATA = 0x1C4, /* port0 phy register data */
+ /* ports 5-7 follow after this */
+ MVS_P4_CFG_ADDR = 0x230, /* Port4 config address */
+ MVS_P4_CFG_DATA = 0x234, /* Port4 config data */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_VSR_ADDR = 0x1E0, /* port0 VSR address */
+ MVS_P0_VSR_DATA = 0x1E4, /* port0 VSR data */
+ /* ports 5-7 follow after this */
+ MVS_P4_VSR_ADDR = 0x250, /* port4 VSR addr */
+ MVS_P4_VSR_DATA = 0x254, /* port4 VSR data */
+};
+
+enum pci_cfg_registers {
+ PCR_PHY_CTL = 0x40,
+ PCR_PHY_CTL2 = 0x90,
+ PCR_DEV_CTRL = 0xE8,
+ PCR_LINK_STAT = 0xF2,
+};
+
+/* SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+ VSR_PHY_STAT = 0x00, /* Phy Status */
+ VSR_PHY_MODE1 = 0x01, /* phy tx */
+ VSR_PHY_MODE2 = 0x02, /* tx scc */
+ VSR_PHY_MODE3 = 0x03, /* pll */
+ VSR_PHY_MODE4 = 0x04, /* VCO */
+ VSR_PHY_MODE5 = 0x05, /* Rx */
+ VSR_PHY_MODE6 = 0x06, /* CDR */
+ VSR_PHY_MODE7 = 0x07, /* Impedance */
+ VSR_PHY_MODE8 = 0x08, /* Voltage */
+ VSR_PHY_MODE9 = 0x09, /* Test */
+ VSR_PHY_MODE10 = 0x0A, /* Power */
+ VSR_PHY_MODE11 = 0x0B, /* Phy Mode */
+ VSR_PHY_VS0 = 0x0C, /* Vednor Specific 0 */
+ VSR_PHY_VS1 = 0x0D, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0xF << 8),
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0xF << 12),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (16),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+ (0xF << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+#define MAX_SG_ENTRY 64
+
+struct mvs_prd {
+ __le64 addr; /* 64-bit buffer address */
+ __le32 reserved;
+ __le32 len; /* 16-bit length */
+};
+
+#define SPI_CTRL_REG 0xc0
+#define SPI_CTRL_VENDOR_ENABLE (1U<<29)
+#define SPI_CTRL_SPIRDY (1U<<22)
+#define SPI_CTRL_SPISTART (1U<<20)
+
+#define SPI_CMD_REG 0xc4
+#define SPI_DATA_REG 0xc8
+
+#define SPI_CTRL_REG_64XX 0x10
+#define SPI_CMD_REG_64XX 0x14
+#define SPI_DATA_REG_64XX 0x18
+
+#endif
diff --git a/drivers/scsi/mvsas/mv_94xx.c b/drivers/scsi/mvsas/mv_94xx.c
new file mode 100644
index 0000000..0940fae
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.c
@@ -0,0 +1,672 @@
+/*
+ * Marvell 88SE94xx hardware specific
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+#include "mv_94xx.h"
+#include "mv_chips.h"
+
+static void mvs_94xx_detect_porttype(struct mvs_info *mvi, int i)
+{
+ u32 reg;
+ struct mvs_phy *phy = &mvi->phy[i];
+ u32 phy_status;
+
+ mvs_write_port_vsr_addr(mvi, i, VSR_PHY_MODE3);
+ reg = mvs_read_port_vsr_data(mvi, i);
+ phy_status = ((reg & 0x3f0000) >> 16) & 0xff;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ switch (phy_status) {
+ case 0x10:
+ phy->phy_type |= PORT_TYPE_SAS;
+ break;
+ case 0x1d:
+ default:
+ phy->phy_type |= PORT_TYPE_SATA;
+ break;
+ }
+}
+
+static void __devinit mvs_94xx_enable_xmt(struct mvs_info *mvi, int phy_id)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ tmp = mr32(MVS_PCS);
+ tmp |= 1 << (phy_id + PCS_EN_PORT_XMT_SHIFT2);
+ mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_phy_reset(struct mvs_info *mvi, u32 phy_id, int hard)
+{
+ u32 tmp;
+
+ tmp = mvs_read_port_irq_stat(mvi, phy_id);
+ tmp &= ~PHYEV_RDY_CH;
+ mvs_write_port_irq_stat(mvi, phy_id, tmp);
+ if (hard) {
+ tmp = mvs_read_phy_ctl(mvi, phy_id);
+ tmp |= PHY_RST_HARD;
+ mvs_write_phy_ctl(mvi, phy_id, tmp);
+ do {
+ tmp = mvs_read_phy_ctl(mvi, phy_id);
+ } while (tmp & PHY_RST_HARD);
+ } else {
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_STAT);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ tmp |= PHY_RST;
+ mvs_write_port_vsr_data(mvi, phy_id, tmp);
+ }
+}
+
+static void mvs_94xx_phy_disable(struct mvs_info *mvi, u32 phy_id)
+{
+ u32 tmp;
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+ tmp = mvs_read_port_vsr_data(mvi, phy_id);
+ mvs_write_port_vsr_data(mvi, phy_id, tmp | 0x00800000);
+}
+
+static void mvs_94xx_phy_enable(struct mvs_info *mvi, u32 phy_id)
+{
+ mvs_write_port_vsr_addr(mvi, phy_id, 0x1B4);
+ mvs_write_port_vsr_data(mvi, phy_id, 0x8300ffc1);
+ mvs_write_port_vsr_addr(mvi, phy_id, 0x104);
+ mvs_write_port_vsr_data(mvi, phy_id, 0x00018080);
+ mvs_write_port_vsr_addr(mvi, phy_id, VSR_PHY_MODE2);
+ mvs_write_port_vsr_data(mvi, phy_id, 0x00207fff);
+}
+
+static int __devinit mvs_94xx_init(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ int i;
+ u32 tmp, cctl;
+
+ mvs_show_pcie_usage(mvi);
+ if (mvi->flags & MVF_FLAG_SOC) {
+ tmp = mr32(MVS_PHY_CTL);
+ tmp &= ~PCTL_PWR_OFF;
+ tmp |= PCTL_PHY_DSBL;
+ mw32(MVS_PHY_CTL, tmp);
+ }
+
+ /* Init Chip */
+ /* make sure RST is set; HBA_RST /should/ have done that for us */
+ cctl = mr32(MVS_CTL) & 0xFFFF;
+ if (cctl & CCTL_RST)
+ cctl &= ~CCTL_RST;
+ else
+ mw32_f(MVS_CTL, cctl | CCTL_RST);
+
+ if (mvi->flags & MVF_FLAG_SOC) {
+ tmp = mr32(MVS_PHY_CTL);
+ tmp &= ~PCTL_PWR_OFF;
+ tmp |= PCTL_COM_ON;
+ tmp &= ~PCTL_PHY_DSBL;
+ tmp |= PCTL_LINK_RST;
+ mw32(MVS_PHY_CTL, tmp);
+ msleep(100);
+ tmp &= ~PCTL_LINK_RST;
+ mw32(MVS_PHY_CTL, tmp);
+ msleep(100);
+ }
+
+ /* reset control */
+ mw32(MVS_PCS, 0); /* MVS_PCS */
+ mw32(MVS_STP_REG_SET_0, 0);
+ mw32(MVS_STP_REG_SET_1, 0);
+
+ /* init phys */
+ mvs_phy_hacks(mvi);
+
+ /* disable Multiplexing, enable phy implemented */
+ mw32(MVS_PORTS_IMP, 0xFF);
+
+
+ mw32(MVS_PA_VSR_ADDR, 0x00000104);
+ mw32(MVS_PA_VSR_PORT, 0x00018080);
+ mw32(MVS_PA_VSR_ADDR, VSR_PHY_MODE8);
+ mw32(MVS_PA_VSR_PORT, 0x0084ffff);
+
+ /* set LED blink when IO*/
+ mw32(MVS_PA_VSR_ADDR, 0x00000030);
+ tmp = mr32(MVS_PA_VSR_PORT);
+ tmp &= 0xFFFF00FF;
+ tmp |= 0x00003300;
+ mw32(MVS_PA_VSR_PORT, tmp);
+
+ mw32(MVS_CMD_LIST_LO, mvi->slot_dma);
+ mw32(MVS_CMD_LIST_HI, (mvi->slot_dma >> 16) >> 16);
+
+ mw32(MVS_RX_FIS_LO, mvi->rx_fis_dma);
+ mw32(MVS_RX_FIS_HI, (mvi->rx_fis_dma >> 16) >> 16);
+
+ mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ);
+ mw32(MVS_TX_LO, mvi->tx_dma);
+ mw32(MVS_TX_HI, (mvi->tx_dma >> 16) >> 16);
+
+ mw32(MVS_RX_CFG, MVS_RX_RING_SZ);
+ mw32(MVS_RX_LO, mvi->rx_dma);
+ mw32(MVS_RX_HI, (mvi->rx_dma >> 16) >> 16);
+
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ mvs_94xx_phy_disable(mvi, i);
+ /* set phy local SAS address */
+ mvs_set_sas_addr(mvi, i, CONFIG_ID_FRAME3, CONFIG_ID_FRAME4,
+ (mvi->phy[i].dev_sas_addr));
+
+ mvs_94xx_enable_xmt(mvi, i);
+ mvs_94xx_phy_enable(mvi, i);
+
+ mvs_94xx_phy_reset(mvi, i, 1);
+ msleep(500);
+ mvs_94xx_detect_porttype(mvi, i);
+ }
+
+ if (mvi->flags & MVF_FLAG_SOC) {
+ /* set select registers */
+ writel(0x0E008000, regs + 0x000);
+ writel(0x59000008, regs + 0x004);
+ writel(0x20, regs + 0x008);
+ writel(0x20, regs + 0x00c);
+ writel(0x20, regs + 0x010);
+ writel(0x20, regs + 0x014);
+ writel(0x20, regs + 0x018);
+ writel(0x20, regs + 0x01c);
+ }
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ /* clear phy int status */
+ tmp = mvs_read_port_irq_stat(mvi, i);
+ tmp &= ~PHYEV_SIG_FIS;
+ mvs_write_port_irq_stat(mvi, i, tmp);
+
+ /* set phy int mask */
+ tmp = PHYEV_RDY_CH | PHYEV_BROAD_CH |
+ PHYEV_ID_DONE | PHYEV_DCDR_ERR | PHYEV_CRC_ERR ;
+ mvs_write_port_irq_mask(mvi, i, tmp);
+
+ msleep(100);
+ mvs_update_phyinfo(mvi, i, 1);
+ }
+
+ /* FIXME: update wide port bitmaps */
+
+ /* little endian for open address and command table, etc. */
+ /*
+ * it seems that ( from the spec ) turning on big-endian won't
+ * do us any good on big-endian machines, need further confirmation
+ */
+ cctl = mr32(MVS_CTL);
+ cctl |= CCTL_ENDIAN_CMD;
+ cctl |= CCTL_ENDIAN_DATA;
+ cctl &= ~CCTL_ENDIAN_OPEN;
+ cctl |= CCTL_ENDIAN_RSP;
+ mw32_f(MVS_CTL, cctl);
+
+ /* reset CMD queue */
+ tmp = mr32(MVS_PCS);
+ tmp |= PCS_CMD_RST;
+ mw32(MVS_PCS, tmp);
+ /* interrupt coalescing may cause missing HW interrput in some case,
+ * and the max count is 0x1ff, while our max slot is 0x200,
+ * it will make count 0.
+ */
+ tmp = 0;
+ mw32(MVS_INT_COAL, tmp);
+
+ tmp = 0x100;
+ mw32(MVS_INT_COAL_TMOUT, tmp);
+
+ /* ladies and gentlemen, start your engines */
+ mw32(MVS_TX_CFG, 0);
+ mw32(MVS_TX_CFG, MVS_CHIP_SLOT_SZ | TX_EN);
+ mw32(MVS_RX_CFG, MVS_RX_RING_SZ | RX_EN);
+ /* enable CMD/CMPL_Q/RESP mode */
+ mw32(MVS_PCS, PCS_SATA_RETRY_2 | PCS_FIS_RX_EN |
+ PCS_CMD_EN | PCS_CMD_STOP_ERR);
+
+ /* enable completion queue interrupt */
+ tmp = (CINT_PORT_MASK | CINT_DONE | CINT_MEM | CINT_SRS | CINT_CI_STOP |
+ CINT_DMA_PCIE);
+ tmp |= CINT_PHY_MASK;
+ mw32(MVS_INT_MASK, tmp);
+
+ /* Enable SRS interrupt */
+ mw32(MVS_INT_MASK_SRS_0, 0xFFFF);
+
+ return 0;
+}
+
+static int mvs_94xx_ioremap(struct mvs_info *mvi)
+{
+ if (!mvs_ioremap(mvi, 2, -1)) {
+ mvi->regs_ex = mvi->regs + 0x10200;
+ mvi->regs += 0x20000;
+ if (mvi->id == 1)
+ mvi->regs += 0x4000;
+ return 0;
+ }
+ return -1;
+}
+
+static void mvs_94xx_iounmap(struct mvs_info *mvi)
+{
+ if (mvi->regs) {
+ mvi->regs -= 0x20000;
+ if (mvi->id == 1)
+ mvi->regs -= 0x4000;
+ mvs_iounmap(mvi->regs);
+ }
+}
+
+static void mvs_94xx_interrupt_enable(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs_ex;
+ u32 tmp;
+
+ tmp = mr32(MVS_GBL_CTL);
+ tmp |= (IRQ_SAS_A | IRQ_SAS_B);
+ mw32(MVS_GBL_INT_STAT, tmp);
+ writel(tmp, regs + 0x0C);
+ writel(tmp, regs + 0x10);
+ writel(tmp, regs + 0x14);
+ writel(tmp, regs + 0x18);
+ mw32(MVS_GBL_CTL, tmp);
+}
+
+static void mvs_94xx_interrupt_disable(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs_ex;
+ u32 tmp;
+
+ tmp = mr32(MVS_GBL_CTL);
+
+ tmp &= ~(IRQ_SAS_A | IRQ_SAS_B);
+ mw32(MVS_GBL_INT_STAT, tmp);
+ writel(tmp, regs + 0x0C);
+ writel(tmp, regs + 0x10);
+ writel(tmp, regs + 0x14);
+ writel(tmp, regs + 0x18);
+ mw32(MVS_GBL_CTL, tmp);
+}
+
+static u32 mvs_94xx_isr_status(struct mvs_info *mvi, int irq)
+{
+ void __iomem *regs = mvi->regs_ex;
+ u32 stat = 0;
+ if (!(mvi->flags & MVF_FLAG_SOC)) {
+ stat = mr32(MVS_GBL_INT_STAT);
+
+ if (!(stat & (IRQ_SAS_A | IRQ_SAS_B)))
+ return 0;
+ }
+ return stat;
+}
+
+static irqreturn_t mvs_94xx_isr(struct mvs_info *mvi, int irq, u32 stat)
+{
+ void __iomem *regs = mvi->regs;
+
+ if (((stat & IRQ_SAS_A) && mvi->id == 0) ||
+ ((stat & IRQ_SAS_B) && mvi->id == 1)) {
+ mw32_f(MVS_INT_STAT, CINT_DONE);
+ #ifndef MVS_USE_TASKLET
+ spin_lock(&mvi->lock);
+ #endif
+ mvs_int_full(mvi);
+ #ifndef MVS_USE_TASKLET
+ spin_unlock(&mvi->lock);
+ #endif
+ }
+ return IRQ_HANDLED;
+}
+
+static void mvs_94xx_command_active(struct mvs_info *mvi, u32 slot_idx)
+{
+ u32 tmp;
+ mvs_cw32(mvi, 0x300 + (slot_idx >> 3), 1 << (slot_idx % 32));
+ do {
+ tmp = mvs_cr32(mvi, 0x300 + (slot_idx >> 3));
+ } while (tmp & 1 << (slot_idx % 32));
+}
+
+static void mvs_94xx_issue_stop(struct mvs_info *mvi, enum mvs_port_type type,
+ u32 tfs)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+
+ if (type == PORT_TYPE_SATA) {
+ tmp = mr32(MVS_INT_STAT_SRS_0) | (1U << tfs);
+ mw32(MVS_INT_STAT_SRS_0, tmp);
+ }
+ mw32(MVS_INT_STAT, CINT_CI_STOP);
+ tmp = mr32(MVS_PCS) | 0xFF00;
+ mw32(MVS_PCS, tmp);
+}
+
+static void mvs_94xx_free_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp;
+ u8 reg_set = *tfs;
+
+ if (*tfs == MVS_ID_NOT_MAPPED)
+ return;
+
+ mvi->sata_reg_set &= ~bit(reg_set);
+ if (reg_set < 32) {
+ w_reg_set_enable(reg_set, (u32)mvi->sata_reg_set);
+ tmp = mr32(MVS_INT_STAT_SRS_0) & (u32)mvi->sata_reg_set;
+ if (tmp)
+ mw32(MVS_INT_STAT_SRS_0, tmp);
+ } else {
+ w_reg_set_enable(reg_set, mvi->sata_reg_set);
+ tmp = mr32(MVS_INT_STAT_SRS_1) & mvi->sata_reg_set;
+ if (tmp)
+ mw32(MVS_INT_STAT_SRS_1, tmp);
+ }
+
+ *tfs = MVS_ID_NOT_MAPPED;
+
+ return;
+}
+
+static u8 mvs_94xx_assign_reg_set(struct mvs_info *mvi, u8 *tfs)
+{
+ int i;
+ void __iomem *regs = mvi->regs;
+
+ if (*tfs != MVS_ID_NOT_MAPPED)
+ return 0;
+
+ i = mv_ffc64(mvi->sata_reg_set);
+ if (i > 32) {
+ mvi->sata_reg_set |= bit(i);
+ w_reg_set_enable(i, (u32)(mvi->sata_reg_set >> 32));
+ *tfs = i;
+ return 0;
+ } else if (i >= 0) {
+ mvi->sata_reg_set |= bit(i);
+ w_reg_set_enable(i, (u32)mvi->sata_reg_set);
+ *tfs = i;
+ return 0;
+ }
+ return MVS_ID_NOT_MAPPED;
+}
+
+static void mvs_94xx_make_prd(struct scatterlist *scatter, int nr, void *prd)
+{
+ int i;
+ struct scatterlist *sg;
+ struct mvs_prd *buf_prd = prd;
+ for_each_sg(scatter, sg, nr, i) {
+ buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+ buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+ buf_prd++;
+ }
+}
+
+static int mvs_94xx_oob_done(struct mvs_info *mvi, int i)
+{
+ u32 phy_st;
+ phy_st = mvs_read_phy_ctl(mvi, i);
+ if (phy_st & PHY_READY_MASK) /* phy ready */
+ return 1;
+ return 0;
+}
+
+static void mvs_94xx_get_dev_identify_frame(struct mvs_info *mvi, int port_id,
+ struct sas_identify_frame *id)
+{
+ int i;
+ u32 id_frame[7];
+
+ for (i = 0; i < 7; i++) {
+ mvs_write_port_cfg_addr(mvi, port_id,
+ CONFIG_ID_FRAME0 + i * 4);
+ id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+ }
+ memcpy(id, id_frame, 28);
+}
+
+static void mvs_94xx_get_att_identify_frame(struct mvs_info *mvi, int port_id,
+ struct sas_identify_frame *id)
+{
+ int i;
+ u32 id_frame[7];
+
+ /* mvs_hexdump(28, (u8 *)id_frame, 0); */
+ for (i = 0; i < 7; i++) {
+ mvs_write_port_cfg_addr(mvi, port_id,
+ CONFIG_ATT_ID_FRAME0 + i * 4);
+ id_frame[i] = mvs_read_port_cfg_data(mvi, port_id);
+ mv_dprintk("94xx phy %d atta frame %d %x.\n",
+ port_id + mvi->id * mvi->chip->n_phy, i, id_frame[i]);
+ }
+ /* mvs_hexdump(28, (u8 *)id_frame, 0); */
+ memcpy(id, id_frame, 28);
+}
+
+static u32 mvs_94xx_make_dev_info(struct sas_identify_frame *id)
+{
+ u32 att_dev_info = 0;
+
+ att_dev_info |= id->dev_type;
+ if (id->stp_iport)
+ att_dev_info |= PORT_DEV_STP_INIT;
+ if (id->smp_iport)
+ att_dev_info |= PORT_DEV_SMP_INIT;
+ if (id->ssp_iport)
+ att_dev_info |= PORT_DEV_SSP_INIT;
+ if (id->stp_tport)
+ att_dev_info |= PORT_DEV_STP_TRGT;
+ if (id->smp_tport)
+ att_dev_info |= PORT_DEV_SMP_TRGT;
+ if (id->ssp_tport)
+ att_dev_info |= PORT_DEV_SSP_TRGT;
+
+ att_dev_info |= (u32)id->phy_id<<24;
+ return att_dev_info;
+}
+
+static u32 mvs_94xx_make_att_info(struct sas_identify_frame *id)
+{
+ return mvs_94xx_make_dev_info(id);
+}
+
+static void mvs_94xx_fix_phy_info(struct mvs_info *mvi, int i,
+ struct sas_identify_frame *id)
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ mv_dprintk("get all reg link rate is 0x%x\n", phy->phy_status);
+ sas_phy->linkrate =
+ (phy->phy_status & PHY_NEG_SPP_PHYS_LINK_RATE_MASK) >>
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET;
+ sas_phy->linkrate += 0x8;
+ mv_dprintk("get link rate is %d\n", sas_phy->linkrate);
+ phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+ phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+ mvs_94xx_get_dev_identify_frame(mvi, i, id);
+ phy->dev_info = mvs_94xx_make_dev_info(id);
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ mvs_94xx_get_att_identify_frame(mvi, i, id);
+ phy->att_dev_info = mvs_94xx_make_att_info(id);
+ phy->att_dev_sas_addr = *(u64 *)id->sas_addr;
+ } else {
+ phy->att_dev_info = PORT_DEV_STP_TRGT | 1;
+ }
+
+}
+
+void mvs_94xx_phy_set_link_rate(struct mvs_info *mvi, u32 phy_id,
+ struct sas_phy_linkrates *rates)
+{
+ /* TODO */
+}
+
+static void mvs_94xx_clear_active_cmds(struct mvs_info *mvi)
+{
+ u32 tmp;
+ void __iomem *regs = mvi->regs;
+ tmp = mr32(MVS_STP_REG_SET_0);
+ mw32(MVS_STP_REG_SET_0, 0);
+ mw32(MVS_STP_REG_SET_0, tmp);
+ tmp = mr32(MVS_STP_REG_SET_1);
+ mw32(MVS_STP_REG_SET_1, 0);
+ mw32(MVS_STP_REG_SET_1, tmp);
+}
+
+
+u32 mvs_94xx_spi_read_data(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+ return mr32(SPI_RD_DATA_REG_94XX);
+}
+
+void mvs_94xx_spi_write_data(struct mvs_info *mvi, u32 data)
+{
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+ mw32(SPI_RD_DATA_REG_94XX, data);
+}
+
+
+int mvs_94xx_spi_buildcmd(struct mvs_info *mvi,
+ u32 *dwCmd,
+ u8 cmd,
+ u8 read,
+ u8 length,
+ u32 addr
+ )
+{
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+ u32 dwTmp;
+
+ dwTmp = ((u32)cmd << 8) | ((u32)length << 4);
+ if (read)
+ dwTmp |= SPI_CTRL_READ_94XX;
+
+ if (addr != MV_MAX_U32) {
+ mw32(SPI_ADDR_REG_94XX, (addr & 0x0003FFFFL));
+ dwTmp |= SPI_ADDR_VLD_94XX;
+ }
+
+ *dwCmd = dwTmp;
+ return 0;
+}
+
+
+int mvs_94xx_spi_issuecmd(struct mvs_info *mvi, u32 cmd)
+{
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+ mw32(SPI_CTRL_REG_94XX, cmd | SPI_CTRL_SpiStart_94XX);
+
+ return 0;
+}
+
+int mvs_94xx_spi_waitdataready(struct mvs_info *mvi, u32 timeout)
+{
+ void __iomem *regs = mvi->regs_ex - 0x10200;
+ u32 i, dwTmp;
+
+ for (i = 0; i < timeout; i++) {
+ dwTmp = mr32(SPI_CTRL_REG_94XX);
+ if (!(dwTmp & SPI_CTRL_SpiStart_94XX))
+ return 0;
+ msleep(10);
+ }
+
+ return -1;
+}
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+void mvs_94xx_fix_dma(dma_addr_t buf_dma, int buf_len, int from, void *prd)
+{
+ int i;
+ struct mvs_prd *buf_prd = prd;
+ buf_prd += from;
+ for (i = 0; i < MAX_SG_ENTRY - from; i++) {
+ buf_prd->addr = cpu_to_le64(buf_dma);
+ buf_prd->im_len.len = cpu_to_le32(buf_len);
+ ++buf_prd;
+ }
+}
+#endif
+
+const struct mvs_dispatch mvs_94xx_dispatch = {
+ "mv94xx",
+ mvs_94xx_init,
+ NULL,
+ mvs_94xx_ioremap,
+ mvs_94xx_iounmap,
+ mvs_94xx_isr,
+ mvs_94xx_isr_status,
+ mvs_94xx_interrupt_enable,
+ mvs_94xx_interrupt_disable,
+ mvs_read_phy_ctl,
+ mvs_write_phy_ctl,
+ mvs_read_port_cfg_data,
+ mvs_write_port_cfg_data,
+ mvs_write_port_cfg_addr,
+ mvs_read_port_vsr_data,
+ mvs_write_port_vsr_data,
+ mvs_write_port_vsr_addr,
+ mvs_read_port_irq_stat,
+ mvs_write_port_irq_stat,
+ mvs_read_port_irq_mask,
+ mvs_write_port_irq_mask,
+ mvs_get_sas_addr,
+ mvs_94xx_command_active,
+ mvs_94xx_issue_stop,
+ mvs_start_delivery,
+ mvs_rx_update,
+ mvs_int_full,
+ mvs_94xx_assign_reg_set,
+ mvs_94xx_free_reg_set,
+ mvs_get_prd_size,
+ mvs_get_prd_count,
+ mvs_94xx_make_prd,
+ mvs_94xx_detect_porttype,
+ mvs_94xx_oob_done,
+ mvs_94xx_fix_phy_info,
+ NULL,
+ mvs_94xx_phy_set_link_rate,
+ mvs_hw_max_link_rate,
+ mvs_94xx_phy_disable,
+ mvs_94xx_phy_enable,
+ mvs_94xx_phy_reset,
+ NULL,
+ mvs_94xx_clear_active_cmds,
+ mvs_94xx_spi_read_data,
+ mvs_94xx_spi_write_data,
+ mvs_94xx_spi_buildcmd,
+ mvs_94xx_spi_issuecmd,
+ mvs_94xx_spi_waitdataready,
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ mvs_94xx_fix_dma,
+#endif
+};
+
diff --git a/drivers/scsi/mvsas/mv_94xx.h b/drivers/scsi/mvsas/mv_94xx.h
new file mode 100644
index 0000000..23ed9b1
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_94xx.h
@@ -0,0 +1,222 @@
+/*
+ * Marvell 88SE94xx hardware specific head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MVS94XX_REG_H_
+#define _MVS94XX_REG_H_
+
+#include <linux/types.h>
+
+#define MAX_LINK_RATE SAS_LINK_RATE_6_0_GBPS
+
+enum hw_registers {
+ MVS_GBL_CTL = 0x04, /* global control */
+ MVS_GBL_INT_STAT = 0x00, /* global irq status */
+ MVS_GBL_PI = 0x0C, /* ports implemented bitmask */
+
+ MVS_PHY_CTL = 0x40, /* SOC PHY Control */
+ MVS_PORTS_IMP = 0x9C, /* SOC Port Implemented */
+
+ MVS_GBL_PORT_TYPE = 0xa0, /* port type */
+
+ MVS_CTL = 0x100, /* SAS/SATA port configuration */
+ MVS_PCS = 0x104, /* SAS/SATA port control/status */
+ MVS_CMD_LIST_LO = 0x108, /* cmd list addr */
+ MVS_CMD_LIST_HI = 0x10C,
+ MVS_RX_FIS_LO = 0x110, /* RX FIS list addr */
+ MVS_RX_FIS_HI = 0x114,
+ MVS_STP_REG_SET_0 = 0x118, /* STP/SATA Register Set Enable */
+ MVS_STP_REG_SET_1 = 0x11C,
+ MVS_TX_CFG = 0x120, /* TX configuration */
+ MVS_TX_LO = 0x124, /* TX (delivery) ring addr */
+ MVS_TX_HI = 0x128,
+
+ MVS_TX_PROD_IDX = 0x12C, /* TX producer pointer */
+ MVS_TX_CONS_IDX = 0x130, /* TX consumer pointer (RO) */
+ MVS_RX_CFG = 0x134, /* RX configuration */
+ MVS_RX_LO = 0x138, /* RX (completion) ring addr */
+ MVS_RX_HI = 0x13C,
+ MVS_RX_CONS_IDX = 0x140, /* RX consumer pointer (RO) */
+
+ MVS_INT_COAL = 0x148, /* Int coalescing config */
+ MVS_INT_COAL_TMOUT = 0x14C, /* Int coalescing timeout */
+ MVS_INT_STAT = 0x150, /* Central int status */
+ MVS_INT_MASK = 0x154, /* Central int enable */
+ MVS_INT_STAT_SRS_0 = 0x158, /* SATA register set status */
+ MVS_INT_MASK_SRS_0 = 0x15C,
+ MVS_INT_STAT_SRS_1 = 0x160,
+ MVS_INT_MASK_SRS_1 = 0x164,
+ MVS_NON_NCQ_ERR_0 = 0x168, /* SRS Non-specific NCQ Error */
+ MVS_NON_NCQ_ERR_1 = 0x16C,
+ MVS_CMD_ADDR = 0x170, /* Command register port (addr) */
+ MVS_CMD_DATA = 0x174, /* Command register port (data) */
+ MVS_MEM_PARITY_ERR = 0x178, /* Memory parity error */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_INT_STAT = 0x180, /* port0 interrupt status */
+ MVS_P0_INT_MASK = 0x184, /* port0 interrupt mask */
+ /* ports 5-7 follow after this */
+ MVS_P4_INT_STAT = 0x1A0, /* Port4 interrupt status */
+ MVS_P4_INT_MASK = 0x1A4, /* Port4 interrupt enable mask */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_SER_CTLSTAT = 0x1D0, /* port0 serial control/status */
+ /* ports 5-7 follow after this */
+ MVS_P4_SER_CTLSTAT = 0x1E0, /* port4 serial control/status */
+
+ /* ports 1-3 follow after this */
+ MVS_P0_CFG_ADDR = 0x200, /* port0 phy register address */
+ MVS_P0_CFG_DATA = 0x204, /* port0 phy register data */
+ /* ports 5-7 follow after this */
+ MVS_P4_CFG_ADDR = 0x220, /* Port4 config address */
+ MVS_P4_CFG_DATA = 0x224, /* Port4 config data */
+
+ /* phys 1-3 follow after this */
+ MVS_P0_VSR_ADDR = 0x250, /* phy0 VSR address */
+ MVS_P0_VSR_DATA = 0x254, /* phy0 VSR data */
+ /* phys 1-3 follow after this */
+ /* multiplexing */
+ MVS_P4_VSR_ADDR = 0x250, /* phy4 VSR address */
+ MVS_P4_VSR_DATA = 0x254, /* phy4 VSR data */
+ MVS_PA_VSR_ADDR = 0x290, /* All port VSR addr */
+ MVS_PA_VSR_PORT = 0x294, /* All port VSR data */
+};
+
+enum pci_cfg_registers {
+ PCR_PHY_CTL = 0x40,
+ PCR_PHY_CTL2 = 0x90,
+ PCR_DEV_CTRL = 0x78,
+ PCR_LINK_STAT = 0x82,
+};
+
+/* SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+ VSR_PHY_STAT = 0x00 * 4, /* Phy Status */
+ VSR_PHY_MODE1 = 0x01 * 4, /* phy tx */
+ VSR_PHY_MODE2 = 0x02 * 4, /* tx scc */
+ VSR_PHY_MODE3 = 0x03 * 4, /* pll */
+ VSR_PHY_MODE4 = 0x04 * 4, /* VCO */
+ VSR_PHY_MODE5 = 0x05 * 4, /* Rx */
+ VSR_PHY_MODE6 = 0x06 * 4, /* CDR */
+ VSR_PHY_MODE7 = 0x07 * 4, /* Impedance */
+ VSR_PHY_MODE8 = 0x08 * 4, /* Voltage */
+ VSR_PHY_MODE9 = 0x09 * 4, /* Test */
+ VSR_PHY_MODE10 = 0x0A * 4, /* Power */
+ VSR_PHY_MODE11 = 0x0B * 4, /* Phy Mode */
+ VSR_PHY_VS0 = 0x0C * 4, /* Vednor Specific 0 */
+ VSR_PHY_VS1 = 0x0D * 4, /* Vednor Specific 1 */
+};
+
+enum chip_register_bits {
+ PHY_MIN_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+ PHY_MAX_SPP_PHYS_LINK_RATE_MASK = (0x7 << 8),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET = (12),
+ PHY_NEG_SPP_PHYS_LINK_RATE_MASK =
+ (0x3 << PHY_NEG_SPP_PHYS_LINK_RATE_MASK_OFFSET),
+};
+
+enum pci_interrupt_cause {
+ /* MAIN_IRQ_CAUSE (R10200) Bits*/
+ IRQ_COM_IN_I2O_IOP0 = (1 << 0),
+ IRQ_COM_IN_I2O_IOP1 = (1 << 1),
+ IRQ_COM_IN_I2O_IOP2 = (1 << 2),
+ IRQ_COM_IN_I2O_IOP3 = (1 << 3),
+ IRQ_COM_OUT_I2O_HOS0 = (1 << 4),
+ IRQ_COM_OUT_I2O_HOS1 = (1 << 5),
+ IRQ_COM_OUT_I2O_HOS2 = (1 << 6),
+ IRQ_COM_OUT_I2O_HOS3 = (1 << 7),
+ IRQ_PCIF_TO_CPU_DRBL0 = (1 << 8),
+ IRQ_PCIF_TO_CPU_DRBL1 = (1 << 9),
+ IRQ_PCIF_TO_CPU_DRBL2 = (1 << 10),
+ IRQ_PCIF_TO_CPU_DRBL3 = (1 << 11),
+ IRQ_PCIF_DRBL0 = (1 << 12),
+ IRQ_PCIF_DRBL1 = (1 << 13),
+ IRQ_PCIF_DRBL2 = (1 << 14),
+ IRQ_PCIF_DRBL3 = (1 << 15),
+ IRQ_XOR_A = (1 << 16),
+ IRQ_XOR_B = (1 << 17),
+ IRQ_SAS_A = (1 << 18),
+ IRQ_SAS_B = (1 << 19),
+ IRQ_CPU_CNTRL = (1 << 20),
+ IRQ_GPIO = (1 << 21),
+ IRQ_UART = (1 << 22),
+ IRQ_SPI = (1 << 23),
+ IRQ_I2C = (1 << 24),
+ IRQ_SGPIO = (1 << 25),
+ IRQ_COM_ERR = (1 << 29),
+ IRQ_I2O_ERR = (1 << 30),
+ IRQ_PCIE_ERR = (1 << 31),
+};
+
+#define MAX_SG_ENTRY 255
+
+struct mvs_prd_imt {
+ __le32 len:22;
+ u8 _r_a:2;
+ u8 misc_ctl:4;
+ u8 inter_sel:4;
+};
+
+struct mvs_prd {
+ /* 64-bit buffer address */
+ __le64 addr;
+ /* 22-bit length */
+ struct mvs_prd_imt im_len;
+} __attribute__ ((packed));
+
+#define SPI_CTRL_REG_94XX 0xc800
+#define SPI_ADDR_REG_94XX 0xc804
+#define SPI_WR_DATA_REG_94XX 0xc808
+#define SPI_RD_DATA_REG_94XX 0xc80c
+#define SPI_CTRL_READ_94XX (1U << 2)
+#define SPI_ADDR_VLD_94XX (1U << 1)
+#define SPI_CTRL_SpiStart_94XX (1U << 0)
+
+#define mv_ffc(x) ffz(x)
+
+static inline int
+mv_ffc64(u64 v)
+{
+ int i;
+ i = mv_ffc((u32)v);
+ if (i >= 0)
+ return i;
+ i = mv_ffc((u32)(v>>32));
+
+ if (i != 0)
+ return 32 + i;
+
+ return -1;
+}
+
+#define r_reg_set_enable(i) \
+ (((i) > 31) ? mr32(MVS_STP_REG_SET_1) : \
+ mr32(MVS_STP_REG_SET_0))
+
+#define w_reg_set_enable(i, tmp) \
+ (((i) > 31) ? mw32(MVS_STP_REG_SET_1, tmp) : \
+ mw32(MVS_STP_REG_SET_0, tmp))
+
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+#endif
+
diff --git a/drivers/scsi/mvsas/mv_chips.h b/drivers/scsi/mvsas/mv_chips.h
new file mode 100644
index 0000000..a67e1c4
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_chips.h
@@ -0,0 +1,280 @@
+/*
+ * Marvell 88SE64xx/88SE94xx register IO interface
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#ifndef _MV_CHIPS_H_
+#define _MV_CHIPS_H_
+
+#define mr32(reg) readl(regs + reg)
+#define mw32(reg, val) writel((val), regs + reg)
+#define mw32_f(reg, val) do { \
+ mw32(reg, val); \
+ mr32(reg); \
+ } while (0)
+
+#define iow32(reg, val) outl(val, (unsigned long)(regs + reg))
+#define ior32(reg) inl((unsigned long)(regs + reg))
+#define iow16(reg, val) outw((unsigned long)(val, regs + reg))
+#define ior16(reg) inw((unsigned long)(regs + reg))
+#define iow8(reg, val) outb((unsigned long)(val, regs + reg))
+#define ior8(reg) inb((unsigned long)(regs + reg))
+
+static inline u32 mvs_cr32(struct mvs_info *mvi, u32 addr)
+{
+ void __iomem *regs = mvi->regs;
+ mw32(MVS_CMD_ADDR, addr);
+ return mr32(MVS_CMD_DATA);
+}
+
+static inline void mvs_cw32(struct mvs_info *mvi, u32 addr, u32 val)
+{
+ void __iomem *regs = mvi->regs;
+ mw32(MVS_CMD_ADDR, addr);
+ mw32(MVS_CMD_DATA, val);
+}
+
+static inline u32 mvs_read_phy_ctl(struct mvs_info *mvi, u32 port)
+{
+ void __iomem *regs = mvi->regs;
+ return (port < 4) ? mr32(MVS_P0_SER_CTLSTAT + port * 4) :
+ mr32(MVS_P4_SER_CTLSTAT + (port - 4) * 4);
+}
+
+static inline void mvs_write_phy_ctl(struct mvs_info *mvi, u32 port, u32 val)
+{
+ void __iomem *regs = mvi->regs;
+ if (port < 4)
+ mw32(MVS_P0_SER_CTLSTAT + port * 4, val);
+ else
+ mw32(MVS_P4_SER_CTLSTAT + (port - 4) * 4, val);
+}
+
+static inline u32 mvs_read_port(struct mvs_info *mvi, u32 off,
+ u32 off2, u32 port)
+{
+ void __iomem *regs = mvi->regs + off;
+ void __iomem *regs2 = mvi->regs + off2;
+ return (port < 4) ? readl(regs + port * 8) :
+ readl(regs2 + (port - 4) * 8);
+}
+
+static inline void mvs_write_port(struct mvs_info *mvi, u32 off, u32 off2,
+ u32 port, u32 val)
+{
+ void __iomem *regs = mvi->regs + off;
+ void __iomem *regs2 = mvi->regs + off2;
+ if (port < 4)
+ writel(val, regs + port * 8);
+ else
+ writel(val, regs2 + (port - 4) * 8);
+}
+
+static inline u32 mvs_read_port_cfg_data(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_CFG_DATA,
+ MVS_P4_CFG_DATA, port);
+}
+
+static inline void mvs_write_port_cfg_data(struct mvs_info *mvi,
+ u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_CFG_DATA,
+ MVS_P4_CFG_DATA, port, val);
+}
+
+static inline void mvs_write_port_cfg_addr(struct mvs_info *mvi,
+ u32 port, u32 addr)
+{
+ mvs_write_port(mvi, MVS_P0_CFG_ADDR,
+ MVS_P4_CFG_ADDR, port, addr);
+ mdelay(10);
+}
+
+static inline u32 mvs_read_port_vsr_data(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_VSR_DATA,
+ MVS_P4_VSR_DATA, port);
+}
+
+static inline void mvs_write_port_vsr_data(struct mvs_info *mvi,
+ u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_VSR_DATA,
+ MVS_P4_VSR_DATA, port, val);
+}
+
+static inline void mvs_write_port_vsr_addr(struct mvs_info *mvi,
+ u32 port, u32 addr)
+{
+ mvs_write_port(mvi, MVS_P0_VSR_ADDR,
+ MVS_P4_VSR_ADDR, port, addr);
+ mdelay(10);
+}
+
+static inline u32 mvs_read_port_irq_stat(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_INT_STAT,
+ MVS_P4_INT_STAT, port);
+}
+
+static inline void mvs_write_port_irq_stat(struct mvs_info *mvi,
+ u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_INT_STAT,
+ MVS_P4_INT_STAT, port, val);
+}
+
+static inline u32 mvs_read_port_irq_mask(struct mvs_info *mvi, u32 port)
+{
+ return mvs_read_port(mvi, MVS_P0_INT_MASK,
+ MVS_P4_INT_MASK, port);
+
+}
+
+static inline void mvs_write_port_irq_mask(struct mvs_info *mvi,
+ u32 port, u32 val)
+{
+ mvs_write_port(mvi, MVS_P0_INT_MASK,
+ MVS_P4_INT_MASK, port, val);
+}
+
+static inline void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+ u32 tmp;
+
+ /* workaround for SATA R-ERR, to ignore phy glitch */
+ tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+ tmp &= ~(1 << 9);
+ tmp |= (1 << 10);
+ mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+
+ /* enable retry 127 times */
+ mvs_cw32(mvi, CMD_SAS_CTL1, 0x7f7f);
+
+ /* extend open frame timeout to max */
+ tmp = mvs_cr32(mvi, CMD_SAS_CTL0);
+ tmp &= ~0xffff;
+ tmp |= 0x3fff;
+ mvs_cw32(mvi, CMD_SAS_CTL0, tmp);
+
+ /* workaround for WDTIMEOUT , set to 550 ms */
+ mvs_cw32(mvi, CMD_WD_TIMER, 0x7a0000);
+
+ /* not to halt for different port op during wideport link change */
+ mvs_cw32(mvi, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+ /* workaround for Seagate disk not-found OOB sequence, recv
+ * COMINIT before sending out COMWAKE */
+ tmp = mvs_cr32(mvi, CMD_PHY_MODE_21);
+ tmp &= 0x0000ffff;
+ tmp |= 0x00fa0000;
+ mvs_cw32(mvi, CMD_PHY_MODE_21, tmp);
+
+ tmp = mvs_cr32(mvi, CMD_PHY_TIMER);
+ tmp &= 0x1fffffff;
+ tmp |= (2U << 29); /* 8 ms retry */
+ mvs_cw32(mvi, CMD_PHY_TIMER, tmp);
+}
+
+static inline void mvs_int_sata(struct mvs_info *mvi)
+{
+ u32 tmp;
+ void __iomem *regs = mvi->regs;
+ tmp = mr32(MVS_INT_STAT_SRS_0);
+ if (tmp)
+ mw32(MVS_INT_STAT_SRS_0, tmp);
+ MVS_CHIP_DISP->clear_active_cmds(mvi);
+}
+
+static inline void mvs_int_full(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ u32 tmp, stat;
+ int i;
+
+ stat = mr32(MVS_INT_STAT);
+ mvs_int_rx(mvi, false);
+
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ tmp = (stat >> i) & (CINT_PORT | CINT_PORT_STOPPED);
+ if (tmp)
+ mvs_int_port(mvi, i, tmp);
+ }
+
+ if (stat & CINT_SRS)
+ mvs_int_sata(mvi);
+
+ mw32(MVS_INT_STAT, stat);
+}
+
+static inline void mvs_start_delivery(struct mvs_info *mvi, u32 tx)
+{
+ void __iomem *regs = mvi->regs;
+ mw32(MVS_TX_PROD_IDX, tx);
+}
+
+static inline u32 mvs_rx_update(struct mvs_info *mvi)
+{
+ void __iomem *regs = mvi->regs;
+ return mr32(MVS_RX_CONS_IDX);
+}
+
+static inline u32 mvs_get_prd_size(void)
+{
+ return sizeof(struct mvs_prd);
+}
+
+static inline u32 mvs_get_prd_count(void)
+{
+ return MAX_SG_ENTRY;
+}
+
+static inline void mvs_show_pcie_usage(struct mvs_info *mvi)
+{
+ u16 link_stat, link_spd;
+ const char *spd[] = {
+ "UnKnown",
+ "2.5",
+ "5.0",
+ };
+ if (mvi->flags & MVF_FLAG_SOC || mvi->id > 0)
+ return;
+
+ pci_read_config_word(mvi->pdev, PCR_LINK_STAT, &link_stat);
+ link_spd = (link_stat & PLS_LINK_SPD) >> PLS_LINK_SPD_OFFS;
+ if (link_spd >= 3)
+ link_spd = 0;
+ dev_printk(KERN_INFO, mvi->dev,
+ "mvsas: PCI-E x%u, Bandwidth Usage: %s Gbps\n",
+ (link_stat & PLS_NEG_LINK_WD) >> PLS_NEG_LINK_WD_OFFS,
+ spd[link_spd]);
+}
+
+static inline u32 mvs_hw_max_link_rate(void)
+{
+ return MAX_LINK_RATE;
+}
+
+#endif /* _MV_CHIPS_H_ */
+
diff --git a/drivers/scsi/mvsas/mv_defs.h b/drivers/scsi/mvsas/mv_defs.h
new file mode 100644
index 0000000..f8cb9de
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_defs.h
@@ -0,0 +1,502 @@
+/*
+ * Marvell 88SE64xx/88SE94xx const head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_DEFS_H_
+#define _MV_DEFS_H_
+
+
+enum chip_flavors {
+ chip_6320,
+ chip_6440,
+ chip_6485,
+ chip_9480,
+ chip_9180,
+};
+
+/* driver compile-time configuration */
+enum driver_configuration {
+ MVS_SLOTS = 512, /* command slots */
+ MVS_TX_RING_SZ = 1024, /* TX ring size (12-bit) */
+ MVS_RX_RING_SZ = 1024, /* RX ring size (12-bit) */
+ /* software requires power-of-2
+ ring size */
+ MVS_SOC_SLOTS = 64,
+ MVS_SOC_TX_RING_SZ = MVS_SOC_SLOTS * 2,
+ MVS_SOC_RX_RING_SZ = MVS_SOC_SLOTS * 2,
+
+ MVS_SLOT_BUF_SZ = 8192, /* cmd tbl + IU + status + PRD */
+ MVS_SSP_CMD_SZ = 64, /* SSP command table buffer size */
+ MVS_ATA_CMD_SZ = 96, /* SATA command table buffer size */
+ MVS_OAF_SZ = 64, /* Open address frame buffer size */
+ MVS_QUEUE_SIZE = 32, /* Support Queue depth */
+ MVS_CAN_QUEUE = MVS_SLOTS - 2, /* SCSI Queue depth */
+ MVS_SOC_CAN_QUEUE = MVS_SOC_SLOTS - 2,
+};
+
+/* unchangeable hardware details */
+enum hardware_details {
+ MVS_MAX_PHYS = 8, /* max. possible phys */
+ MVS_MAX_PORTS = 8, /* max. possible ports */
+ MVS_SOC_PHYS = 4, /* soc phys */
+ MVS_SOC_PORTS = 4, /* soc phys */
+ MVS_MAX_DEVICES = 1024, /* max supported device */
+};
+
+/* peripheral registers (BAR2) */
+enum peripheral_registers {
+ SPI_CTL = 0x10, /* EEPROM control */
+ SPI_CMD = 0x14, /* EEPROM command */
+ SPI_DATA = 0x18, /* EEPROM data */
+};
+
+enum peripheral_register_bits {
+ TWSI_RDY = (1U << 7), /* EEPROM interface ready */
+ TWSI_RD = (1U << 4), /* EEPROM read access */
+
+ SPI_ADDR_MASK = 0x3ffff, /* bits 17:0 */
+};
+
+enum hw_register_bits {
+ /* MVS_GBL_CTL */
+ INT_EN = (1U << 1), /* Global int enable */
+ HBA_RST = (1U << 0), /* HBA reset */
+
+ /* MVS_GBL_INT_STAT */
+ INT_XOR = (1U << 4), /* XOR engine event */
+ INT_SAS_SATA = (1U << 0), /* SAS/SATA event */
+
+ /* MVS_GBL_PORT_TYPE */ /* shl for ports 1-3 */
+ SATA_TARGET = (1U << 16), /* port0 SATA target enable */
+ MODE_AUTO_DET_PORT7 = (1U << 15), /* port0 SAS/SATA autodetect */
+ MODE_AUTO_DET_PORT6 = (1U << 14),
+ MODE_AUTO_DET_PORT5 = (1U << 13),
+ MODE_AUTO_DET_PORT4 = (1U << 12),
+ MODE_AUTO_DET_PORT3 = (1U << 11),
+ MODE_AUTO_DET_PORT2 = (1U << 10),
+ MODE_AUTO_DET_PORT1 = (1U << 9),
+ MODE_AUTO_DET_PORT0 = (1U << 8),
+ MODE_AUTO_DET_EN = MODE_AUTO_DET_PORT0 | MODE_AUTO_DET_PORT1 |
+ MODE_AUTO_DET_PORT2 | MODE_AUTO_DET_PORT3 |
+ MODE_AUTO_DET_PORT4 | MODE_AUTO_DET_PORT5 |
+ MODE_AUTO_DET_PORT6 | MODE_AUTO_DET_PORT7,
+ MODE_SAS_PORT7_MASK = (1U << 7), /* port0 SAS(1), SATA(0) mode */
+ MODE_SAS_PORT6_MASK = (1U << 6),
+ MODE_SAS_PORT5_MASK = (1U << 5),
+ MODE_SAS_PORT4_MASK = (1U << 4),
+ MODE_SAS_PORT3_MASK = (1U << 3),
+ MODE_SAS_PORT2_MASK = (1U << 2),
+ MODE_SAS_PORT1_MASK = (1U << 1),
+ MODE_SAS_PORT0_MASK = (1U << 0),
+ MODE_SAS_SATA = MODE_SAS_PORT0_MASK | MODE_SAS_PORT1_MASK |
+ MODE_SAS_PORT2_MASK | MODE_SAS_PORT3_MASK |
+ MODE_SAS_PORT4_MASK | MODE_SAS_PORT5_MASK |
+ MODE_SAS_PORT6_MASK | MODE_SAS_PORT7_MASK,
+
+ /* SAS_MODE value may be
+ * dictated (in hw) by values
+ * of SATA_TARGET & AUTO_DET
+ */
+
+ /* MVS_TX_CFG */
+ TX_EN = (1U << 16), /* Enable TX */
+ TX_RING_SZ_MASK = 0xfff, /* TX ring size, bits 11:0 */
+
+ /* MVS_RX_CFG */
+ RX_EN = (1U << 16), /* Enable RX */
+ RX_RING_SZ_MASK = 0xfff, /* RX ring size, bits 11:0 */
+
+ /* MVS_INT_COAL */
+ COAL_EN = (1U << 16), /* Enable int coalescing */
+
+ /* MVS_INT_STAT, MVS_INT_MASK */
+ CINT_I2C = (1U << 31), /* I2C event */
+ CINT_SW0 = (1U << 30), /* software event 0 */
+ CINT_SW1 = (1U << 29), /* software event 1 */
+ CINT_PRD_BC = (1U << 28), /* PRD BC err for read cmd */
+ CINT_DMA_PCIE = (1U << 27), /* DMA to PCIE timeout */
+ CINT_MEM = (1U << 26), /* int mem parity err */
+ CINT_I2C_SLAVE = (1U << 25), /* slave I2C event */
+ CINT_SRS = (1U << 3), /* SRS event */
+ CINT_CI_STOP = (1U << 1), /* cmd issue stopped */
+ CINT_DONE = (1U << 0), /* cmd completion */
+
+ /* shl for ports 1-3 */
+ CINT_PORT_STOPPED = (1U << 16), /* port0 stopped */
+ CINT_PORT = (1U << 8), /* port0 event */
+ CINT_PORT_MASK_OFFSET = 8,
+ CINT_PORT_MASK = (0xFF << CINT_PORT_MASK_OFFSET),
+ CINT_PHY_MASK_OFFSET = 4,
+ CINT_PHY_MASK = (0x0F << CINT_PHY_MASK_OFFSET),
+
+ /* TX (delivery) ring bits */
+ TXQ_CMD_SHIFT = 29,
+ TXQ_CMD_SSP = 1, /* SSP protocol */
+ TXQ_CMD_SMP = 2, /* SMP protocol */
+ TXQ_CMD_STP = 3, /* STP/SATA protocol */
+ TXQ_CMD_SSP_FREE_LIST = 4, /* add to SSP targ free list */
+ TXQ_CMD_SLOT_RESET = 7, /* reset command slot */
+ TXQ_MODE_I = (1U << 28), /* mode: 0=target,1=initiator */
+ TXQ_MODE_TARGET = 0,
+ TXQ_MODE_INITIATOR = 1,
+ TXQ_PRIO_HI = (1U << 27), /* priority: 0=normal, 1=high */
+ TXQ_PRI_NORMAL = 0,
+ TXQ_PRI_HIGH = 1,
+ TXQ_SRS_SHIFT = 20, /* SATA register set */
+ TXQ_SRS_MASK = 0x7f,
+ TXQ_PHY_SHIFT = 12, /* PHY bitmap */
+ TXQ_PHY_MASK = 0xff,
+ TXQ_SLOT_MASK = 0xfff, /* slot number */
+
+ /* RX (completion) ring bits */
+ RXQ_GOOD = (1U << 23), /* Response good */
+ RXQ_SLOT_RESET = (1U << 21), /* Slot reset complete */
+ RXQ_CMD_RX = (1U << 20), /* target cmd received */
+ RXQ_ATTN = (1U << 19), /* attention */
+ RXQ_RSP = (1U << 18), /* response frame xfer'd */
+ RXQ_ERR = (1U << 17), /* err info rec xfer'd */
+ RXQ_DONE = (1U << 16), /* cmd complete */
+ RXQ_SLOT_MASK = 0xfff, /* slot number */
+
+ /* mvs_cmd_hdr bits */
+ MCH_PRD_LEN_SHIFT = 16, /* 16-bit PRD table len */
+ MCH_SSP_FR_TYPE_SHIFT = 13, /* SSP frame type */
+
+ /* SSP initiator only */
+ MCH_SSP_FR_CMD = 0x0, /* COMMAND frame */
+
+ /* SSP initiator or target */
+ MCH_SSP_FR_TASK = 0x1, /* TASK frame */
+
+ /* SSP target only */
+ MCH_SSP_FR_XFER_RDY = 0x4, /* XFER_RDY frame */
+ MCH_SSP_FR_RESP = 0x5, /* RESPONSE frame */
+ MCH_SSP_FR_READ = 0x6, /* Read DATA frame(s) */
+ MCH_SSP_FR_READ_RESP = 0x7, /* ditto, plus RESPONSE */
+
+ MCH_SSP_MODE_PASSTHRU = 1,
+ MCH_SSP_MODE_NORMAL = 0,
+ MCH_PASSTHRU = (1U << 12), /* pass-through (SSP) */
+ MCH_FBURST = (1U << 11), /* first burst (SSP) */
+ MCH_CHK_LEN = (1U << 10), /* chk xfer len (SSP) */
+ MCH_RETRY = (1U << 9), /* tport layer retry (SSP) */
+ MCH_PROTECTION = (1U << 8), /* protection info rec (SSP) */
+ MCH_RESET = (1U << 7), /* Reset (STP/SATA) */
+ MCH_FPDMA = (1U << 6), /* First party DMA (STP/SATA) */
+ MCH_ATAPI = (1U << 5), /* ATAPI (STP/SATA) */
+ MCH_BIST = (1U << 4), /* BIST activate (STP/SATA) */
+ MCH_PMP_MASK = 0xf, /* PMP from cmd FIS (STP/SATA)*/
+
+ CCTL_RST = (1U << 5), /* port logic reset */
+
+ /* 0(LSB first), 1(MSB first) */
+ CCTL_ENDIAN_DATA = (1U << 3), /* PRD data */
+ CCTL_ENDIAN_RSP = (1U << 2), /* response frame */
+ CCTL_ENDIAN_OPEN = (1U << 1), /* open address frame */
+ CCTL_ENDIAN_CMD = (1U << 0), /* command table */
+
+ /* MVS_Px_SER_CTLSTAT (per-phy control) */
+ PHY_SSP_RST = (1U << 3), /* reset SSP link layer */
+ PHY_BCAST_CHG = (1U << 2), /* broadcast(change) notif */
+ PHY_RST_HARD = (1U << 1), /* hard reset + phy reset */
+ PHY_RST = (1U << 0), /* phy reset */
+ PHY_READY_MASK = (1U << 20),
+
+ /* MVS_Px_INT_STAT, MVS_Px_INT_MASK (per-phy events) */
+ PHYEV_DEC_ERR = (1U << 24), /* Phy Decoding Error */
+ PHYEV_DCDR_ERR = (1U << 23), /* STP Deocder Error */
+ PHYEV_CRC_ERR = (1U << 22), /* STP CRC Error */
+ PHYEV_UNASSOC_FIS = (1U << 19), /* unassociated FIS rx'd */
+ PHYEV_AN = (1U << 18), /* SATA async notification */
+ PHYEV_BIST_ACT = (1U << 17), /* BIST activate FIS */
+ PHYEV_SIG_FIS = (1U << 16), /* signature FIS */
+ PHYEV_POOF = (1U << 12), /* phy ready from 1 -> 0 */
+ PHYEV_IU_BIG = (1U << 11), /* IU too long err */
+ PHYEV_IU_SMALL = (1U << 10), /* IU too short err */
+ PHYEV_UNK_TAG = (1U << 9), /* unknown tag */
+ PHYEV_BROAD_CH = (1U << 8), /* broadcast(CHANGE) */
+ PHYEV_COMWAKE = (1U << 7), /* COMWAKE rx'd */
+ PHYEV_PORT_SEL = (1U << 6), /* port selector present */
+ PHYEV_HARD_RST = (1U << 5), /* hard reset rx'd */
+ PHYEV_ID_TMOUT = (1U << 4), /* identify timeout */
+ PHYEV_ID_FAIL = (1U << 3), /* identify failed */
+ PHYEV_ID_DONE = (1U << 2), /* identify done */
+ PHYEV_HARD_RST_DONE = (1U << 1), /* hard reset done */
+ PHYEV_RDY_CH = (1U << 0), /* phy ready changed state */
+
+ /* MVS_PCS */
+ PCS_EN_SATA_REG_SHIFT = (16), /* Enable SATA Register Set */
+ PCS_EN_PORT_XMT_SHIFT = (12), /* Enable Port Transmit */
+ PCS_EN_PORT_XMT_SHIFT2 = (8), /* For 6485 */
+ PCS_SATA_RETRY = (1U << 8), /* retry ctl FIS on R_ERR */
+ PCS_RSP_RX_EN = (1U << 7), /* raw response rx */
+ PCS_SATA_RETRY_2 = (1U << 6), /* For 9180 */
+ PCS_SELF_CLEAR = (1U << 5), /* self-clearing int mode */
+ PCS_FIS_RX_EN = (1U << 4), /* FIS rx enable */
+ PCS_CMD_STOP_ERR = (1U << 3), /* cmd stop-on-err enable */
+ PCS_CMD_RST = (1U << 1), /* reset cmd issue */
+ PCS_CMD_EN = (1U << 0), /* enable cmd issue */
+
+ /* Port n Attached Device Info */
+ PORT_DEV_SSP_TRGT = (1U << 19),
+ PORT_DEV_SMP_TRGT = (1U << 18),
+ PORT_DEV_STP_TRGT = (1U << 17),
+ PORT_DEV_SSP_INIT = (1U << 11),
+ PORT_DEV_SMP_INIT = (1U << 10),
+ PORT_DEV_STP_INIT = (1U << 9),
+ PORT_PHY_ID_MASK = (0xFFU << 24),
+ PORT_SSP_TRGT_MASK = (0x1U << 19),
+ PORT_SSP_INIT_MASK = (0x1U << 11),
+ PORT_DEV_TRGT_MASK = (0x7U << 17),
+ PORT_DEV_INIT_MASK = (0x7U << 9),
+ PORT_DEV_TYPE_MASK = (0x7U << 0),
+
+ /* Port n PHY Status */
+ PHY_RDY = (1U << 2),
+ PHY_DW_SYNC = (1U << 1),
+ PHY_OOB_DTCTD = (1U << 0),
+
+ /* VSR */
+ /* PHYMODE 6 (CDB) */
+ PHY_MODE6_LATECLK = (1U << 29), /* Lock Clock */
+ PHY_MODE6_DTL_SPEED = (1U << 27), /* Digital Loop Speed */
+ PHY_MODE6_FC_ORDER = (1U << 26), /* Fibre Channel Mode Order*/
+ PHY_MODE6_MUCNT_EN = (1U << 24), /* u Count Enable */
+ PHY_MODE6_SEL_MUCNT_LEN = (1U << 22), /* Training Length Select */
+ PHY_MODE6_SELMUPI = (1U << 20), /* Phase Multi Select (init) */
+ PHY_MODE6_SELMUPF = (1U << 18), /* Phase Multi Select (final) */
+ PHY_MODE6_SELMUFF = (1U << 16), /* Freq Loop Multi Sel(final) */
+ PHY_MODE6_SELMUFI = (1U << 14), /* Freq Loop Multi Sel(init) */
+ PHY_MODE6_FREEZE_LOOP = (1U << 12), /* Freeze Rx CDR Loop */
+ PHY_MODE6_INT_RXFOFFS = (1U << 3), /* Rx CDR Freq Loop Enable */
+ PHY_MODE6_FRC_RXFOFFS = (1U << 2), /* Initial Rx CDR Offset */
+ PHY_MODE6_STAU_0D8 = (1U << 1), /* Rx CDR Freq Loop Saturate */
+ PHY_MODE6_RXSAT_DIS = (1U << 0), /* Saturate Ctl */
+};
+
+/* SAS/SATA configuration port registers, aka phy registers */
+enum sas_sata_config_port_regs {
+ PHYR_IDENTIFY = 0x00, /* info for IDENTIFY frame */
+ PHYR_ADDR_LO = 0x04, /* my SAS address (low) */
+ PHYR_ADDR_HI = 0x08, /* my SAS address (high) */
+ PHYR_ATT_DEV_INFO = 0x0C, /* attached device info */
+ PHYR_ATT_ADDR_LO = 0x10, /* attached dev SAS addr (low) */
+ PHYR_ATT_ADDR_HI = 0x14, /* attached dev SAS addr (high) */
+ PHYR_SATA_CTL = 0x18, /* SATA control */
+ PHYR_PHY_STAT = 0x1C, /* PHY status */
+ PHYR_SATA_SIG0 = 0x20, /*port SATA signature FIS(Byte 0-3) */
+ PHYR_SATA_SIG1 = 0x24, /*port SATA signature FIS(Byte 4-7) */
+ PHYR_SATA_SIG2 = 0x28, /*port SATA signature FIS(Byte 8-11) */
+ PHYR_SATA_SIG3 = 0x2c, /*port SATA signature FIS(Byte 12-15) */
+ PHYR_R_ERR_COUNT = 0x30, /* port R_ERR count register */
+ PHYR_CRC_ERR_COUNT = 0x34, /* port CRC error count register */
+ PHYR_WIDE_PORT = 0x38, /* wide port participating */
+ PHYR_CURRENT0 = 0x80, /* current connection info 0 */
+ PHYR_CURRENT1 = 0x84, /* current connection info 1 */
+ PHYR_CURRENT2 = 0x88, /* current connection info 2 */
+ CONFIG_ID_FRAME0 = 0x100, /* Port device ID frame register 0 */
+ CONFIG_ID_FRAME1 = 0x104, /* Port device ID frame register 1 */
+ CONFIG_ID_FRAME2 = 0x108, /* Port device ID frame register 2 */
+ CONFIG_ID_FRAME3 = 0x10c, /* Port device ID frame register 3 */
+ CONFIG_ID_FRAME4 = 0x110, /* Port device ID frame register 4 */
+ CONFIG_ID_FRAME5 = 0x114, /* Port device ID frame register 5 */
+ CONFIG_ID_FRAME6 = 0x118, /* Port device ID frame register 6 */
+ CONFIG_ATT_ID_FRAME0 = 0x11c, /* attached ID frame register 0 */
+ CONFIG_ATT_ID_FRAME1 = 0x120, /* attached ID frame register 1 */
+ CONFIG_ATT_ID_FRAME2 = 0x124, /* attached ID frame register 2 */
+ CONFIG_ATT_ID_FRAME3 = 0x128, /* attached ID frame register 3 */
+ CONFIG_ATT_ID_FRAME4 = 0x12c, /* attached ID frame register 4 */
+ CONFIG_ATT_ID_FRAME5 = 0x130, /* attached ID frame register 5 */
+ CONFIG_ATT_ID_FRAME6 = 0x134, /* attached ID frame register 6 */
+};
+
+enum sas_cmd_port_registers {
+ CMD_CMRST_OOB_DET = 0x100, /* COMRESET OOB detect register */
+ CMD_CMWK_OOB_DET = 0x104, /* COMWAKE OOB detect register */
+ CMD_CMSAS_OOB_DET = 0x108, /* COMSAS OOB detect register */
+ CMD_BRST_OOB_DET = 0x10c, /* burst OOB detect register */
+ CMD_OOB_SPACE = 0x110, /* OOB space control register */
+ CMD_OOB_BURST = 0x114, /* OOB burst control register */
+ CMD_PHY_TIMER = 0x118, /* PHY timer control register */
+ CMD_PHY_CONFIG0 = 0x11c, /* PHY config register 0 */
+ CMD_PHY_CONFIG1 = 0x120, /* PHY config register 1 */
+ CMD_SAS_CTL0 = 0x124, /* SAS control register 0 */
+ CMD_SAS_CTL1 = 0x128, /* SAS control register 1 */
+ CMD_SAS_CTL2 = 0x12c, /* SAS control register 2 */
+ CMD_SAS_CTL3 = 0x130, /* SAS control register 3 */
+ CMD_ID_TEST = 0x134, /* ID test register */
+ CMD_PL_TIMER = 0x138, /* PL timer register */
+ CMD_WD_TIMER = 0x13c, /* WD timer register */
+ CMD_PORT_SEL_COUNT = 0x140, /* port selector count register */
+ CMD_APP_MEM_CTL = 0x144, /* Application Memory Control */
+ CMD_XOR_MEM_CTL = 0x148, /* XOR Block Memory Control */
+ CMD_DMA_MEM_CTL = 0x14c, /* DMA Block Memory Control */
+ CMD_PORT_MEM_CTL0 = 0x150, /* Port Memory Control 0 */
+ CMD_PORT_MEM_CTL1 = 0x154, /* Port Memory Control 1 */
+ CMD_SATA_PORT_MEM_CTL0 = 0x158, /* SATA Port Memory Control 0 */
+ CMD_SATA_PORT_MEM_CTL1 = 0x15c, /* SATA Port Memory Control 1 */
+ CMD_XOR_MEM_BIST_CTL = 0x160, /* XOR Memory BIST Control */
+ CMD_XOR_MEM_BIST_STAT = 0x164, /* XOR Memroy BIST Status */
+ CMD_DMA_MEM_BIST_CTL = 0x168, /* DMA Memory BIST Control */
+ CMD_DMA_MEM_BIST_STAT = 0x16c, /* DMA Memory BIST Status */
+ CMD_PORT_MEM_BIST_CTL = 0x170, /* Port Memory BIST Control */
+ CMD_PORT_MEM_BIST_STAT0 = 0x174, /* Port Memory BIST Status 0 */
+ CMD_PORT_MEM_BIST_STAT1 = 0x178, /* Port Memory BIST Status 1 */
+ CMD_STP_MEM_BIST_CTL = 0x17c, /* STP Memory BIST Control */
+ CMD_STP_MEM_BIST_STAT0 = 0x180, /* STP Memory BIST Status 0 */
+ CMD_STP_MEM_BIST_STAT1 = 0x184, /* STP Memory BIST Status 1 */
+ CMD_RESET_COUNT = 0x188, /* Reset Count */
+ CMD_MONTR_DATA_SEL = 0x18C, /* Monitor Data/Select */
+ CMD_PLL_PHY_CONFIG = 0x190, /* PLL/PHY Configuration */
+ CMD_PHY_CTL = 0x194, /* PHY Control and Status */
+ CMD_PHY_TEST_COUNT0 = 0x198, /* Phy Test Count 0 */
+ CMD_PHY_TEST_COUNT1 = 0x19C, /* Phy Test Count 1 */
+ CMD_PHY_TEST_COUNT2 = 0x1A0, /* Phy Test Count 2 */
+ CMD_APP_ERR_CONFIG = 0x1A4, /* Application Error Configuration */
+ CMD_PND_FIFO_CTL0 = 0x1A8, /* Pending FIFO Control 0 */
+ CMD_HOST_CTL = 0x1AC, /* Host Control Status */
+ CMD_HOST_WR_DATA = 0x1B0, /* Host Write Data */
+ CMD_HOST_RD_DATA = 0x1B4, /* Host Read Data */
+ CMD_PHY_MODE_21 = 0x1B8, /* Phy Mode 21 */
+ CMD_SL_MODE0 = 0x1BC, /* SL Mode 0 */
+ CMD_SL_MODE1 = 0x1C0, /* SL Mode 1 */
+ CMD_PND_FIFO_CTL1 = 0x1C4, /* Pending FIFO Control 1 */
+};
+
+enum mvs_info_flags {
+ MVF_MSI = (1U << 0), /* MSI is enabled */
+ MVF_PHY_PWR_FIX = (1U << 1), /* bug workaround */
+ MVF_FLAG_SOC = (1U << 2), /* SoC integrated controllers */
+};
+
+enum mvs_event_flags {
+ PHY_PLUG_EVENT = (3U),
+ PHY_PLUG_IN = (1U << 0), /* phy plug in */
+ PHY_PLUG_OUT = (1U << 1), /* phy plug out */
+};
+
+enum mvs_port_type {
+ PORT_TGT_MASK = (1U << 5),
+ PORT_INIT_PORT = (1U << 4),
+ PORT_TGT_PORT = (1U << 3),
+ PORT_INIT_TGT_PORT = (PORT_INIT_PORT | PORT_TGT_PORT),
+ PORT_TYPE_SAS = (1U << 1),
+ PORT_TYPE_SATA = (1U << 0),
+};
+
+/* Command Table Format */
+enum ct_format {
+ /* SSP */
+ SSP_F_H = 0x00,
+ SSP_F_IU = 0x18,
+ SSP_F_MAX = 0x4D,
+ /* STP */
+ STP_CMD_FIS = 0x00,
+ STP_ATAPI_CMD = 0x40,
+ STP_F_MAX = 0x10,
+ /* SMP */
+ SMP_F_T = 0x00,
+ SMP_F_DEP = 0x01,
+ SMP_F_MAX = 0x101,
+};
+
+enum status_buffer {
+ SB_EIR_OFF = 0x00, /* Error Information Record */
+ SB_RFB_OFF = 0x08, /* Response Frame Buffer */
+ SB_RFB_MAX = 0x400, /* RFB size*/
+};
+
+enum error_info_rec {
+ CMD_ISS_STPD = (1U << 31), /* Cmd Issue Stopped */
+ CMD_PI_ERR = (1U << 30), /* Protection info error. see flags2 */
+ RSP_OVER = (1U << 29), /* rsp buffer overflow */
+ RETRY_LIM = (1U << 28), /* FIS/frame retry limit exceeded */
+ UNK_FIS = (1U << 27), /* unknown FIS */
+ DMA_TERM = (1U << 26), /* DMA terminate primitive rx'd */
+ SYNC_ERR = (1U << 25), /* SYNC rx'd during frame xmit */
+ TFILE_ERR = (1U << 24), /* SATA taskfile Error bit set */
+ R_ERR = (1U << 23), /* SATA returned R_ERR prim */
+ RD_OFS = (1U << 20), /* Read DATA frame invalid offset */
+ XFER_RDY_OFS = (1U << 19), /* XFER_RDY offset error */
+ UNEXP_XFER_RDY = (1U << 18), /* unexpected XFER_RDY error */
+ DATA_OVER_UNDER = (1U << 16), /* data overflow/underflow */
+ INTERLOCK = (1U << 15), /* interlock error */
+ NAK = (1U << 14), /* NAK rx'd */
+ ACK_NAK_TO = (1U << 13), /* ACK/NAK timeout */
+ CXN_CLOSED = (1U << 12), /* cxn closed w/out ack/nak */
+ OPEN_TO = (1U << 11), /* I_T nexus lost, open cxn timeout */
+ PATH_BLOCKED = (1U << 10), /* I_T nexus lost, pathway blocked */
+ NO_DEST = (1U << 9), /* I_T nexus lost, no destination */
+ STP_RES_BSY = (1U << 8), /* STP resources busy */
+ BREAK = (1U << 7), /* break received */
+ BAD_DEST = (1U << 6), /* bad destination */
+ BAD_PROTO = (1U << 5), /* protocol not supported */
+ BAD_RATE = (1U << 4), /* cxn rate not supported */
+ WRONG_DEST = (1U << 3), /* wrong destination error */
+ CREDIT_TO = (1U << 2), /* credit timeout */
+ WDOG_TO = (1U << 1), /* watchdog timeout */
+ BUF_PAR = (1U << 0), /* buffer parity error */
+};
+
+enum error_info_rec_2 {
+ SLOT_BSY_ERR = (1U << 31), /* Slot Busy Error */
+ GRD_CHK_ERR = (1U << 14), /* Guard Check Error */
+ APP_CHK_ERR = (1U << 13), /* Application Check error */
+ REF_CHK_ERR = (1U << 12), /* Reference Check Error */
+ USR_BLK_NM = (1U << 0), /* User Block Number */
+};
+
+enum pci_cfg_register_bits {
+ PCTL_PWR_OFF = (0xFU << 24),
+ PCTL_COM_ON = (0xFU << 20),
+ PCTL_LINK_RST = (0xFU << 16),
+ PCTL_LINK_OFFS = (16),
+ PCTL_PHY_DSBL = (0xFU << 12),
+ PCTL_PHY_DSBL_OFFS = (12),
+ PRD_REQ_SIZE = (0x4000),
+ PRD_REQ_MASK = (0x00007000),
+ PLS_NEG_LINK_WD = (0x3FU << 4),
+ PLS_NEG_LINK_WD_OFFS = 4,
+ PLS_LINK_SPD = (0x0FU << 0),
+ PLS_LINK_SPD_OFFS = 0,
+};
+
+enum open_frame_protocol {
+ PROTOCOL_SMP = 0x0,
+ PROTOCOL_SSP = 0x1,
+ PROTOCOL_STP = 0x2,
+};
+
+/* define for response frame datapres field */
+enum datapres_field {
+ NO_DATA = 0,
+ RESPONSE_DATA = 1,
+ SENSE_DATA = 2,
+};
+
+/* define task management IU */
+struct mvs_tmf_task{
+ u8 tmf;
+ u16 tag_of_task_to_be_managed;
+};
+#endif
diff --git a/drivers/scsi/mvsas/mv_init.c b/drivers/scsi/mvsas/mv_init.c
new file mode 100644
index 0000000..8646a19
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_init.c
@@ -0,0 +1,703 @@
+/*
+ * Marvell 88SE64xx/88SE94xx pci init
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+
+#include "mv_sas.h"
+
+static struct scsi_transport_template *mvs_stt;
+static const struct mvs_chip_info mvs_chips[] = {
+ [chip_6320] = { 1, 2, 0x400, 17, 16, 9, &mvs_64xx_dispatch, },
+ [chip_6440] = { 1, 4, 0x400, 17, 16, 9, &mvs_64xx_dispatch, },
+ [chip_6485] = { 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
+ [chip_9180] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
+ [chip_9480] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
+};
+
+#define SOC_SAS_NUM 2
+
+static struct scsi_host_template mvs_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = sas_queuecommand,
+ .target_alloc = sas_target_alloc,
+ .slave_configure = mvs_slave_configure,
+ .slave_destroy = sas_slave_destroy,
+ .scan_finished = mvs_scan_finished,
+ .scan_start = mvs_scan_start,
+ .change_queue_depth = sas_change_queue_depth,
+ .change_queue_type = sas_change_queue_type,
+ .bios_param = sas_bios_param,
+ .can_queue = 1,
+ .cmd_per_lun = 1,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .max_sectors = SCSI_DEFAULT_MAX_SECTORS,
+ .use_clustering = ENABLE_CLUSTERING,
+ .eh_device_reset_handler = sas_eh_device_reset_handler,
+ .eh_bus_reset_handler = sas_eh_bus_reset_handler,
+ .slave_alloc = mvs_slave_alloc,
+ .target_destroy = sas_target_destroy,
+ .ioctl = sas_ioctl,
+};
+
+static struct sas_domain_function_template mvs_transport_ops = {
+ .lldd_dev_found = mvs_dev_found,
+ .lldd_dev_gone = mvs_dev_gone,
+
+ .lldd_execute_task = mvs_queue_command,
+ .lldd_control_phy = mvs_phy_control,
+
+ .lldd_abort_task = mvs_abort_task,
+ .lldd_abort_task_set = mvs_abort_task_set,
+ .lldd_clear_aca = mvs_clear_aca,
+ .lldd_clear_task_set = mvs_clear_task_set,
+ .lldd_I_T_nexus_reset = mvs_I_T_nexus_reset,
+ .lldd_lu_reset = mvs_lu_reset,
+ .lldd_query_task = mvs_query_task,
+
+ .lldd_port_formed = mvs_port_formed,
+ .lldd_port_deformed = mvs_port_deformed,
+
+};
+
+static void __devinit mvs_phy_init(struct mvs_info *mvi, int phy_id)
+{
+ struct mvs_phy *phy = &mvi->phy[phy_id];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ phy->mvi = mvi;
+ init_timer(&phy->timer);
+ sas_phy->enabled = (phy_id < mvi->chip->n_phy) ? 1 : 0;
+ sas_phy->class = SAS;
+ sas_phy->iproto = SAS_PROTOCOL_ALL;
+ sas_phy->tproto = 0;
+ sas_phy->type = PHY_TYPE_PHYSICAL;
+ sas_phy->role = PHY_ROLE_INITIATOR;
+ sas_phy->oob_mode = OOB_NOT_CONNECTED;
+ sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ sas_phy->id = phy_id;
+ sas_phy->sas_addr = &mvi->sas_addr[0];
+ sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+ sas_phy->ha = (struct sas_ha_struct *)mvi->shost->hostdata;
+ sas_phy->lldd_phy = phy;
+}
+
+static void mvs_free(struct mvs_info *mvi)
+{
+ int i;
+ struct mvs_wq *mwq;
+ int slot_nr;
+
+ if (!mvi)
+ return;
+
+ if (mvi->flags & MVF_FLAG_SOC)
+ slot_nr = MVS_SOC_SLOTS;
+ else
+ slot_nr = MVS_SLOTS;
+
+ for (i = 0; i < mvi->tags_num; i++) {
+ struct mvs_slot_info *slot = &mvi->slot_info[i];
+ if (slot->buf)
+ dma_free_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+ slot->buf, slot->buf_dma);
+ }
+
+ if (mvi->tx)
+ dma_free_coherent(mvi->dev,
+ sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+ mvi->tx, mvi->tx_dma);
+ if (mvi->rx_fis)
+ dma_free_coherent(mvi->dev, MVS_RX_FISL_SZ,
+ mvi->rx_fis, mvi->rx_fis_dma);
+ if (mvi->rx)
+ dma_free_coherent(mvi->dev,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+ mvi->rx, mvi->rx_dma);
+ if (mvi->slot)
+ dma_free_coherent(mvi->dev,
+ sizeof(*mvi->slot) * slot_nr,
+ mvi->slot, mvi->slot_dma);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ if (mvi->bulk_buffer)
+ dma_free_coherent(mvi->dev, TRASH_BUCKET_SIZE,
+ mvi->bulk_buffer, mvi->bulk_buffer_dma);
+#endif
+
+ MVS_CHIP_DISP->chip_iounmap(mvi);
+ if (mvi->shost)
+ scsi_host_put(mvi->shost);
+ list_for_each_entry(mwq, &mvi->wq_list, entry)
+ cancel_delayed_work(&mwq->work_q);
+ kfree(mvi);
+}
+
+#ifdef MVS_USE_TASKLET
+struct tasklet_struct mv_tasklet;
+static void mvs_tasklet(unsigned long opaque)
+{
+ unsigned long flags;
+ u32 stat;
+ u16 core_nr, i = 0;
+
+ struct mvs_info *mvi;
+ struct sas_ha_struct *sha = (struct sas_ha_struct *)opaque;
+
+ core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+ if (unlikely(!mvi))
+ BUG_ON(1);
+
+ for (i = 0; i < core_nr; i++) {
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+ stat = MVS_CHIP_DISP->isr_status(mvi, mvi->irq);
+ if (stat)
+ MVS_CHIP_DISP->isr(mvi, mvi->irq, stat);
+ }
+
+}
+#endif
+
+static irqreturn_t mvs_interrupt(int irq, void *opaque)
+{
+ u32 core_nr, i = 0;
+ u32 stat;
+ struct mvs_info *mvi;
+ struct sas_ha_struct *sha = opaque;
+
+ core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+ if (unlikely(!mvi))
+ return IRQ_NONE;
+
+ stat = MVS_CHIP_DISP->isr_status(mvi, irq);
+ if (!stat)
+ return IRQ_NONE;
+
+#ifdef MVS_USE_TASKLET
+ tasklet_schedule(&mv_tasklet);
+#else
+ for (i = 0; i < core_nr; i++) {
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+ MVS_CHIP_DISP->isr(mvi, irq, stat);
+ }
+#endif
+ return IRQ_HANDLED;
+}
+
+static int __devinit mvs_alloc(struct mvs_info *mvi, struct Scsi_Host *shost)
+{
+ int i, slot_nr;
+
+ if (mvi->flags & MVF_FLAG_SOC)
+ slot_nr = MVS_SOC_SLOTS;
+ else
+ slot_nr = MVS_SLOTS;
+
+ spin_lock_init(&mvi->lock);
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ mvs_phy_init(mvi, i);
+ mvi->port[i].wide_port_phymap = 0;
+ mvi->port[i].port_attached = 0;
+ INIT_LIST_HEAD(&mvi->port[i].list);
+ }
+ for (i = 0; i < MVS_MAX_DEVICES; i++) {
+ mvi->devices[i].taskfileset = MVS_ID_NOT_MAPPED;
+ mvi->devices[i].dev_type = NO_DEVICE;
+ mvi->devices[i].device_id = i;
+ mvi->devices[i].dev_status = MVS_DEV_NORMAL;
+ }
+
+ /*
+ * alloc and init our DMA areas
+ */
+ mvi->tx = dma_alloc_coherent(mvi->dev,
+ sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ,
+ &mvi->tx_dma, GFP_KERNEL);
+ if (!mvi->tx)
+ goto err_out;
+ memset(mvi->tx, 0, sizeof(*mvi->tx) * MVS_CHIP_SLOT_SZ);
+ mvi->rx_fis = dma_alloc_coherent(mvi->dev, MVS_RX_FISL_SZ,
+ &mvi->rx_fis_dma, GFP_KERNEL);
+ if (!mvi->rx_fis)
+ goto err_out;
+ memset(mvi->rx_fis, 0, MVS_RX_FISL_SZ);
+
+ mvi->rx = dma_alloc_coherent(mvi->dev,
+ sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1),
+ &mvi->rx_dma, GFP_KERNEL);
+ if (!mvi->rx)
+ goto err_out;
+ memset(mvi->rx, 0, sizeof(*mvi->rx) * (MVS_RX_RING_SZ + 1));
+ mvi->rx[0] = cpu_to_le32(0xfff);
+ mvi->rx_cons = 0xfff;
+
+ mvi->slot = dma_alloc_coherent(mvi->dev,
+ sizeof(*mvi->slot) * slot_nr,
+ &mvi->slot_dma, GFP_KERNEL);
+ if (!mvi->slot)
+ goto err_out;
+ memset(mvi->slot, 0, sizeof(*mvi->slot) * slot_nr);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ mvi->bulk_buffer = dma_alloc_coherent(mvi->dev,
+ TRASH_BUCKET_SIZE,
+ &mvi->bulk_buffer_dma, GFP_KERNEL);
+ if (!mvi->bulk_buffer)
+ goto err_out;
+#endif
+ for (i = 0; i < slot_nr; i++) {
+ struct mvs_slot_info *slot = &mvi->slot_info[i];
+
+ slot->buf = dma_alloc_coherent(mvi->dev, MVS_SLOT_BUF_SZ,
+ &slot->buf_dma, GFP_KERNEL);
+ if (!slot->buf) {
+ printk(KERN_DEBUG"failed to allocate slot->buf.\n");
+ goto err_out;
+ }
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+ ++mvi->tags_num;
+ }
+ /* Initialize tags */
+ mvs_tag_init(mvi);
+ return 0;
+err_out:
+ return 1;
+}
+
+
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex)
+{
+ unsigned long res_start, res_len, res_flag, res_flag_ex = 0;
+ struct pci_dev *pdev = mvi->pdev;
+ if (bar_ex != -1) {
+ /*
+ * ioremap main and peripheral registers
+ */
+ res_start = pci_resource_start(pdev, bar_ex);
+ res_len = pci_resource_len(pdev, bar_ex);
+ if (!res_start || !res_len)
+ goto err_out;
+
+ res_flag_ex = pci_resource_flags(pdev, bar_ex);
+ if (res_flag_ex & IORESOURCE_MEM) {
+ if (res_flag_ex & IORESOURCE_CACHEABLE)
+ mvi->regs_ex = ioremap(res_start, res_len);
+ else
+ mvi->regs_ex = ioremap_nocache(res_start,
+ res_len);
+ } else
+ mvi->regs_ex = (void *)res_start;
+ if (!mvi->regs_ex)
+ goto err_out;
+ }
+
+ res_start = pci_resource_start(pdev, bar);
+ res_len = pci_resource_len(pdev, bar);
+ if (!res_start || !res_len)
+ goto err_out;
+
+ res_flag = pci_resource_flags(pdev, bar);
+ if (res_flag & IORESOURCE_CACHEABLE)
+ mvi->regs = ioremap(res_start, res_len);
+ else
+ mvi->regs = ioremap_nocache(res_start, res_len);
+
+ if (!mvi->regs) {
+ if (mvi->regs_ex && (res_flag_ex & IORESOURCE_MEM))
+ iounmap(mvi->regs_ex);
+ mvi->regs_ex = NULL;
+ goto err_out;
+ }
+
+ return 0;
+err_out:
+ return -1;
+}
+
+void mvs_iounmap(void __iomem *regs)
+{
+ iounmap(regs);
+}
+
+static struct mvs_info *__devinit mvs_pci_alloc(struct pci_dev *pdev,
+ const struct pci_device_id *ent,
+ struct Scsi_Host *shost, unsigned int id)
+{
+ struct mvs_info *mvi;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ mvi = kzalloc(sizeof(*mvi) + MVS_SLOTS * sizeof(struct mvs_slot_info),
+ GFP_KERNEL);
+ if (!mvi)
+ return NULL;
+
+ mvi->pdev = pdev;
+ mvi->dev = &pdev->dev;
+ mvi->chip_id = ent->driver_data;
+ mvi->chip = &mvs_chips[mvi->chip_id];
+ INIT_LIST_HEAD(&mvi->wq_list);
+ mvi->irq = pdev->irq;
+
+ ((struct mvs_prv_info *)sha->lldd_ha)->mvi[id] = mvi;
+ ((struct mvs_prv_info *)sha->lldd_ha)->n_phy = mvi->chip->n_phy;
+
+ mvi->id = id;
+ mvi->sas = sha;
+ mvi->shost = shost;
+#ifdef MVS_USE_TASKLET
+ tasklet_init(&mv_tasklet, mvs_tasklet, (unsigned long)sha);
+#endif
+
+ if (MVS_CHIP_DISP->chip_ioremap(mvi))
+ goto err_out;
+ if (!mvs_alloc(mvi, shost))
+ return mvi;
+err_out:
+ mvs_free(mvi);
+ return NULL;
+}
+
+/* move to PCI layer or libata core? */
+static int pci_go_64(struct pci_dev *pdev)
+{
+ int rc;
+
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (rc) {
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
+ return rc;
+ }
+ }
+ } else {
+ rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
+ return rc;
+ }
+ rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (rc) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
+ return rc;
+ }
+ }
+
+ return rc;
+}
+
+static int __devinit mvs_prep_sas_ha_init(struct Scsi_Host *shost,
+ const struct mvs_chip_info *chip_info)
+{
+ int phy_nr, port_nr; unsigned short core_nr;
+ struct asd_sas_phy **arr_phy;
+ struct asd_sas_port **arr_port;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ core_nr = chip_info->n_host;
+ phy_nr = core_nr * chip_info->n_phy;
+ port_nr = phy_nr;
+
+ memset(sha, 0x00, sizeof(struct sas_ha_struct));
+ arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+ arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+ if (!arr_phy || !arr_port)
+ goto exit_free;
+
+ sha->sas_phy = arr_phy;
+ sha->sas_port = arr_port;
+
+ sha->lldd_ha = kzalloc(sizeof(struct mvs_prv_info), GFP_KERNEL);
+ if (!sha->lldd_ha)
+ goto exit_free;
+
+ ((struct mvs_prv_info *)sha->lldd_ha)->n_host = core_nr;
+
+ shost->transportt = mvs_stt;
+ shost->max_id = 128;
+ shost->max_lun = ~0;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+
+ return 0;
+exit_free:
+ kfree(arr_phy);
+ kfree(arr_port);
+ return -1;
+
+}
+
+static void __devinit mvs_post_sas_ha_init(struct Scsi_Host *shost,
+ const struct mvs_chip_info *chip_info)
+{
+ int can_queue, i = 0, j = 0;
+ struct mvs_info *mvi = NULL;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+ unsigned short nr_core = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+ for (j = 0; j < nr_core; j++) {
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+ for (i = 0; i < chip_info->n_phy; i++) {
+ sha->sas_phy[j * chip_info->n_phy + i] =
+ &mvi->phy[i].sas_phy;
+ sha->sas_port[j * chip_info->n_phy + i] =
+ &mvi->port[i].sas_port;
+ }
+ }
+
+ sha->sas_ha_name = DRV_NAME;
+ sha->dev = mvi->dev;
+ sha->lldd_module = THIS_MODULE;
+ sha->sas_addr = &mvi->sas_addr[0];
+
+ sha->num_phys = nr_core * chip_info->n_phy;
+
+ sha->lldd_max_execute_num = 1;
+
+ if (mvi->flags & MVF_FLAG_SOC)
+ can_queue = MVS_SOC_CAN_QUEUE;
+ else
+ can_queue = MVS_CAN_QUEUE;
+
+ sha->lldd_queue_size = can_queue;
+ shost->can_queue = can_queue;
+ mvi->shost->cmd_per_lun = MVS_SLOTS/sha->num_phys;
+ sha->core.shost = mvi->shost;
+}
+
+static void mvs_init_sas_add(struct mvs_info *mvi)
+{
+ u8 i;
+ for (i = 0; i < mvi->chip->n_phy; i++) {
+ mvi->phy[i].dev_sas_addr = 0x5005043011ab0000ULL;
+ mvi->phy[i].dev_sas_addr =
+ cpu_to_be64((u64)(*(u64 *)&mvi->phy[i].dev_sas_addr));
+ }
+
+ memcpy(mvi->sas_addr, &mvi->phy[0].dev_sas_addr, SAS_ADDR_SIZE);
+}
+
+static int __devinit mvs_pci_init(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ unsigned int rc, nhost = 0;
+ struct mvs_info *mvi;
+ irq_handler_t irq_handler = mvs_interrupt;
+ struct Scsi_Host *shost = NULL;
+ const struct mvs_chip_info *chip;
+
+ dev_printk(KERN_INFO, &pdev->dev,
+ "mvsas: driver version %s\n", DRV_VERSION);
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out_enable;
+
+ pci_set_master(pdev);
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc)
+ goto err_out_disable;
+
+ rc = pci_go_64(pdev);
+ if (rc)
+ goto err_out_regions;
+
+ shost = scsi_host_alloc(&mvs_sht, sizeof(void *));
+ if (!shost) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ chip = &mvs_chips[ent->driver_data];
+ SHOST_TO_SAS_HA(shost) =
+ kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+ if (!SHOST_TO_SAS_HA(shost)) {
+ kfree(shost);
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ rc = mvs_prep_sas_ha_init(shost, chip);
+ if (rc) {
+ kfree(shost);
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+
+ do {
+ mvi = mvs_pci_alloc(pdev, ent, shost, nhost);
+ if (!mvi) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ mvs_init_sas_add(mvi);
+
+ mvi->instance = nhost;
+ rc = MVS_CHIP_DISP->chip_init(mvi);
+ if (rc) {
+ mvs_free(mvi);
+ goto err_out_regions;
+ }
+ nhost++;
+ } while (nhost < chip->n_host);
+
+ mvs_post_sas_ha_init(shost, chip);
+
+ rc = scsi_add_host(shost, &pdev->dev);
+ if (rc)
+ goto err_out_shost;
+
+ rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+ if (rc)
+ goto err_out_shost;
+ rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED,
+ DRV_NAME, SHOST_TO_SAS_HA(shost));
+ if (rc)
+ goto err_not_sas;
+
+ MVS_CHIP_DISP->interrupt_enable(mvi);
+
+ scsi_scan_host(mvi->shost);
+
+ return 0;
+
+err_not_sas:
+ sas_unregister_ha(SHOST_TO_SAS_HA(shost));
+err_out_shost:
+ scsi_remove_host(mvi->shost);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out_disable:
+ pci_disable_device(pdev);
+err_out_enable:
+ return rc;
+}
+
+static void __devexit mvs_pci_remove(struct pci_dev *pdev)
+{
+ unsigned short core_nr, i = 0;
+ struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+ struct mvs_info *mvi = NULL;
+
+ core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[0];
+
+#ifdef MVS_USE_TASKLET
+ tasklet_kill(&mv_tasklet);
+#endif
+
+ pci_set_drvdata(pdev, NULL);
+ sas_unregister_ha(sha);
+ sas_remove_host(mvi->shost);
+ scsi_remove_host(mvi->shost);
+
+ MVS_CHIP_DISP->interrupt_disable(mvi);
+ free_irq(mvi->irq, sha);
+ for (i = 0; i < core_nr; i++) {
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[i];
+ mvs_free(mvi);
+ }
+ kfree(sha->sas_phy);
+ kfree(sha->sas_port);
+ kfree(sha);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ return;
+}
+
+static struct pci_device_id __devinitdata mvs_pci_table[] = {
+ { PCI_VDEVICE(MARVELL, 0x6320), chip_6320 },
+ { PCI_VDEVICE(MARVELL, 0x6340), chip_6440 },
+ {
+ .vendor = PCI_VENDOR_ID_MARVELL,
+ .device = 0x6440,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = 0x6480,
+ .class = 0,
+ .class_mask = 0,
+ .driver_data = chip_6485,
+ },
+ { PCI_VDEVICE(MARVELL, 0x6440), chip_6440 },
+ { PCI_VDEVICE(MARVELL, 0x6485), chip_6485 },
+ { PCI_VDEVICE(MARVELL, 0x9480), chip_9480 },
+ { PCI_VDEVICE(MARVELL, 0x9180), chip_9180 },
+
+ { } /* terminate list */
+};
+
+static struct pci_driver mvs_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = mvs_pci_table,
+ .probe = mvs_pci_init,
+ .remove = __devexit_p(mvs_pci_remove),
+};
+
+/* task handler */
+struct task_struct *mvs_th;
+static int __init mvs_init(void)
+{
+ int rc;
+ mvs_stt = sas_domain_attach_transport(&mvs_transport_ops);
+ if (!mvs_stt)
+ return -ENOMEM;
+
+ rc = pci_register_driver(&mvs_pci_driver);
+
+ if (rc)
+ goto err_out;
+
+ return 0;
+
+err_out:
+ sas_release_transport(mvs_stt);
+ return rc;
+}
+
+static void __exit mvs_exit(void)
+{
+ pci_unregister_driver(&mvs_pci_driver);
+ sas_release_transport(mvs_stt);
+}
+
+module_init(mvs_init);
+module_exit(mvs_exit);
+
+MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
+MODULE_DESCRIPTION("Marvell 88SE6440 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+#ifdef CONFIG_PCI
+MODULE_DEVICE_TABLE(pci, mvs_pci_table);
+#endif
diff --git a/drivers/scsi/mvsas/mv_sas.c b/drivers/scsi/mvsas/mv_sas.c
new file mode 100644
index 0000000..0d21386
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.c
@@ -0,0 +1,2154 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#include "mv_sas.h"
+
+static int mvs_find_tag(struct mvs_info *mvi, struct sas_task *task, u32 *tag)
+{
+ if (task->lldd_task) {
+ struct mvs_slot_info *slot;
+ slot = task->lldd_task;
+ *tag = slot->slot_tag;
+ return 1;
+ }
+ return 0;
+}
+
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag)
+{
+ void *bitmap = &mvi->tags;
+ clear_bit(tag, bitmap);
+}
+
+void mvs_tag_free(struct mvs_info *mvi, u32 tag)
+{
+ mvs_tag_clear(mvi, tag);
+}
+
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag)
+{
+ void *bitmap = &mvi->tags;
+ set_bit(tag, bitmap);
+}
+
+inline int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out)
+{
+ unsigned int index, tag;
+ void *bitmap = &mvi->tags;
+
+ index = find_first_zero_bit(bitmap, mvi->tags_num);
+ tag = index;
+ if (tag >= mvi->tags_num)
+ return -SAS_QUEUE_FULL;
+ mvs_tag_set(mvi, tag);
+ *tag_out = tag;
+ return 0;
+}
+
+void mvs_tag_init(struct mvs_info *mvi)
+{
+ int i;
+ for (i = 0; i < mvi->tags_num; ++i)
+ mvs_tag_clear(mvi, i);
+}
+
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr)
+{
+ u32 i;
+ u32 run;
+ u32 offset;
+
+ offset = 0;
+ while (size) {
+ printk(KERN_DEBUG"%08X : ", baseaddr + offset);
+ if (size >= 16)
+ run = 16;
+ else
+ run = size;
+ size -= run;
+ for (i = 0; i < 16; i++) {
+ if (i < run)
+ printk(KERN_DEBUG"%02X ", (u32)data[i]);
+ else
+ printk(KERN_DEBUG" ");
+ }
+ printk(KERN_DEBUG": ");
+ for (i = 0; i < run; i++)
+ printk(KERN_DEBUG"%c",
+ isalnum(data[i]) ? data[i] : '.');
+ printk(KERN_DEBUG"\n");
+ data = &data[16];
+ offset += run;
+ }
+ printk(KERN_DEBUG"\n");
+}
+
+#if (_MV_DUMP > 1)
+static void mvs_hba_sb_dump(struct mvs_info *mvi, u32 tag,
+ enum sas_protocol proto)
+{
+ u32 offset;
+ struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+ offset = slot->cmd_size + MVS_OAF_SZ +
+ MVS_CHIP_DISP->prd_size() * slot->n_elem;
+ dev_printk(KERN_DEBUG, mvi->dev, "+---->Status buffer[%d] :\n",
+ tag);
+ mvs_hexdump(32, (u8 *) slot->response,
+ (u32) slot->buf_dma + offset);
+}
+#endif
+
+static void mvs_hba_memory_dump(struct mvs_info *mvi, u32 tag,
+ enum sas_protocol proto)
+{
+#if (_MV_DUMP > 1)
+ u32 sz, w_ptr;
+ u64 addr;
+ struct mvs_slot_info *slot = &mvi->slot_info[tag];
+
+ /*Delivery Queue */
+ sz = MVS_CHIP_SLOT_SZ;
+ w_ptr = slot->tx;
+ addr = mvi->tx_dma;
+ dev_printk(KERN_DEBUG, mvi->dev,
+ "Delivery Queue Size=%04d , WRT_PTR=%04X\n", sz, w_ptr);
+ dev_printk(KERN_DEBUG, mvi->dev,
+ "Delivery Queue Base Address=0x%llX (PA)"
+ "(tx_dma=0x%llX), Entry=%04d\n",
+ addr, (unsigned long long)mvi->tx_dma, w_ptr);
+ mvs_hexdump(sizeof(u32), (u8 *)(&mvi->tx[mvi->tx_prod]),
+ (u32) mvi->tx_dma + sizeof(u32) * w_ptr);
+ /*Command List */
+ addr = mvi->slot_dma;
+ dev_printk(KERN_DEBUG, mvi->dev,
+ "Command List Base Address=0x%llX (PA)"
+ "(slot_dma=0x%llX), Header=%03d\n",
+ addr, (unsigned long long)slot->buf_dma, tag);
+ dev_printk(KERN_DEBUG, mvi->dev, "Command Header[%03d]:\n", tag);
+ /*mvs_cmd_hdr */
+ mvs_hexdump(sizeof(struct mvs_cmd_hdr), (u8 *)(&mvi->slot[tag]),
+ (u32) mvi->slot_dma + tag * sizeof(struct mvs_cmd_hdr));
+ /*1.command table area */
+ dev_printk(KERN_DEBUG, mvi->dev, "+---->Command Table :\n");
+ mvs_hexdump(slot->cmd_size, (u8 *) slot->buf, (u32) slot->buf_dma);
+ /*2.open address frame area */
+ dev_printk(KERN_DEBUG, mvi->dev, "+---->Open Address Frame :\n");
+ mvs_hexdump(MVS_OAF_SZ, (u8 *) slot->buf + slot->cmd_size,
+ (u32) slot->buf_dma + slot->cmd_size);
+ /*3.status buffer */
+ mvs_hba_sb_dump(mvi, tag, proto);
+ /*4.PRD table */
+ dev_printk(KERN_DEBUG, mvi->dev, "+---->PRD table :\n");
+ mvs_hexdump(MVS_CHIP_DISP->prd_size() * slot->n_elem,
+ (u8 *) slot->buf + slot->cmd_size + MVS_OAF_SZ,
+ (u32) slot->buf_dma + slot->cmd_size + MVS_OAF_SZ);
+#endif
+}
+
+static void mvs_hba_cq_dump(struct mvs_info *mvi)
+{
+#if (_MV_DUMP > 2)
+ u64 addr;
+ void __iomem *regs = mvi->regs;
+ u32 entry = mvi->rx_cons + 1;
+ u32 rx_desc = le32_to_cpu(mvi->rx[entry]);
+
+ /*Completion Queue */
+ addr = mr32(RX_HI) << 16 << 16 | mr32(RX_LO);
+ dev_printk(KERN_DEBUG, mvi->dev, "Completion Task = 0x%p\n",
+ mvi->slot_info[rx_desc & RXQ_SLOT_MASK].task);
+ dev_printk(KERN_DEBUG, mvi->dev,
+ "Completion List Base Address=0x%llX (PA), "
+ "CQ_Entry=%04d, CQ_WP=0x%08X\n",
+ addr, entry - 1, mvi->rx[0]);
+ mvs_hexdump(sizeof(u32), (u8 *)(&rx_desc),
+ mvi->rx_dma + sizeof(u32) * entry);
+#endif
+}
+
+void mvs_get_sas_addr(void *buf, u32 buflen)
+{
+ /*memcpy(buf, "\x50\x05\x04\x30\x11\xab\x64\x40", 8);*/
+}
+
+struct mvs_info *mvs_find_dev_mvi(struct domain_device *dev)
+{
+ unsigned long i = 0, j = 0, hi = 0;
+ struct sas_ha_struct *sha = dev->port->ha;
+ struct mvs_info *mvi = NULL;
+ struct asd_sas_phy *phy;
+
+ while (sha->sas_port[i]) {
+ if (sha->sas_port[i] == dev->port) {
+ phy = container_of(sha->sas_port[i]->phy_list.next,
+ struct asd_sas_phy, port_phy_el);
+ j = 0;
+ while (sha->sas_phy[j]) {
+ if (sha->sas_phy[j] == phy)
+ break;
+ j++;
+ }
+ break;
+ }
+ i++;
+ }
+ hi = j/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+ return mvi;
+
+}
+
+/* FIXME */
+int mvs_find_dev_phyno(struct domain_device *dev, int *phyno)
+{
+ unsigned long i = 0, j = 0, n = 0, num = 0;
+ struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+ struct mvs_info *mvi = mvi_dev->mvi_info;
+ struct sas_ha_struct *sha = dev->port->ha;
+
+ while (sha->sas_port[i]) {
+ if (sha->sas_port[i] == dev->port) {
+ struct asd_sas_phy *phy;
+ list_for_each_entry(phy,
+ &sha->sas_port[i]->phy_list, port_phy_el) {
+ j = 0;
+ while (sha->sas_phy[j]) {
+ if (sha->sas_phy[j] == phy)
+ break;
+ j++;
+ }
+ phyno[n] = (j >= mvi->chip->n_phy) ?
+ (j - mvi->chip->n_phy) : j;
+ num++;
+ n++;
+ }
+ break;
+ }
+ i++;
+ }
+ return num;
+}
+
+static inline void mvs_free_reg_set(struct mvs_info *mvi,
+ struct mvs_device *dev)
+{
+ if (!dev) {
+ mv_printk("device has been free.\n");
+ return;
+ }
+ if (dev->runing_req != 0)
+ return;
+ if (dev->taskfileset == MVS_ID_NOT_MAPPED)
+ return;
+ MVS_CHIP_DISP->free_reg_set(mvi, &dev->taskfileset);
+}
+
+static inline u8 mvs_assign_reg_set(struct mvs_info *mvi,
+ struct mvs_device *dev)
+{
+ if (dev->taskfileset != MVS_ID_NOT_MAPPED)
+ return 0;
+ return MVS_CHIP_DISP->assign_reg_set(mvi, &dev->taskfileset);
+}
+
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard)
+{
+ u32 no;
+ for_each_phy(phy_mask, phy_mask, no) {
+ if (!(phy_mask & 1))
+ continue;
+ MVS_CHIP_DISP->phy_reset(mvi, no, hard);
+ }
+}
+
+/* FIXME: locking? */
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata)
+{
+ int rc = 0, phy_id = sas_phy->id;
+ u32 tmp, i = 0, hi;
+ struct sas_ha_struct *sha = sas_phy->ha;
+ struct mvs_info *mvi = NULL;
+
+ while (sha->sas_phy[i]) {
+ if (sha->sas_phy[i] == sas_phy)
+ break;
+ i++;
+ }
+ hi = i/((struct mvs_prv_info *)sha->lldd_ha)->n_phy;
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[hi];
+
+ switch (func) {
+ case PHY_FUNC_SET_LINK_RATE:
+ MVS_CHIP_DISP->phy_set_link_rate(mvi, phy_id, funcdata);
+ break;
+
+ case PHY_FUNC_HARD_RESET:
+ tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_id);
+ if (tmp & PHY_RST_HARD)
+ break;
+ MVS_CHIP_DISP->phy_reset(mvi, phy_id, 1);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ MVS_CHIP_DISP->phy_enable(mvi, phy_id);
+ MVS_CHIP_DISP->phy_reset(mvi, phy_id, 0);
+ break;
+
+ case PHY_FUNC_DISABLE:
+ MVS_CHIP_DISP->phy_disable(mvi, phy_id);
+ break;
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ default:
+ rc = -EOPNOTSUPP;
+ }
+ msleep(200);
+ return rc;
+}
+
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+ u32 off_lo, u32 off_hi, u64 sas_addr)
+{
+ u32 lo = (u32)sas_addr;
+ u32 hi = (u32)(sas_addr>>32);
+
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_lo);
+ MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, lo);
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, port_id, off_hi);
+ MVS_CHIP_DISP->write_port_cfg_data(mvi, port_id, hi);
+}
+
+static void mvs_bytes_dmaed(struct mvs_info *mvi, int i)
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ struct sas_ha_struct *sas_ha;
+ if (!phy->phy_attached)
+ return;
+
+ if (!(phy->att_dev_info & PORT_DEV_TRGT_MASK)
+ && phy->phy_type & PORT_TYPE_SAS) {
+ return;
+ }
+
+ sas_ha = mvi->sas;
+ sas_ha->notify_phy_event(sas_phy, PHYE_OOB_DONE);
+
+ if (sas_phy->phy) {
+ struct sas_phy *sphy = sas_phy->phy;
+
+ sphy->negotiated_linkrate = sas_phy->linkrate;
+ sphy->minimum_linkrate = phy->minimum_linkrate;
+ sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+ sphy->maximum_linkrate = phy->maximum_linkrate;
+ sphy->maximum_linkrate_hw = MVS_CHIP_DISP->phy_max_link_rate();
+ }
+
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ struct sas_identify_frame *id;
+
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ id->dev_type = phy->identify.device_type;
+ id->initiator_bits = SAS_PROTOCOL_ALL;
+ id->target_bits = phy->identify.target_port_protocols;
+ } else if (phy->phy_type & PORT_TYPE_SATA) {
+ /*Nothing*/
+ }
+ mv_dprintk("phy %d byte dmaded.\n", i + mvi->id * mvi->chip->n_phy);
+
+ sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+
+ mvi->sas->notify_port_event(sas_phy,
+ PORTE_BYTES_DMAED);
+}
+
+int mvs_slave_alloc(struct scsi_device *scsi_dev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+ if (dev_is_sata(dev)) {
+ /* We don't need to rescan targets
+ * if REPORT_LUNS request is failed
+ */
+ if (scsi_dev->lun > 0)
+ return -ENXIO;
+ scsi_dev->tagged_supported = 1;
+ }
+
+ return sas_slave_alloc(scsi_dev);
+}
+
+int mvs_slave_configure(struct scsi_device *sdev)
+{
+ struct domain_device *dev = sdev_to_domain_dev(sdev);
+ int ret = sas_slave_configure(sdev);
+
+ if (ret)
+ return ret;
+ if (dev_is_sata(dev)) {
+ /* may set PIO mode */
+ #if MV_DISABLE_NCQ
+ struct ata_port *ap = dev->sata_dev.ap;
+ struct ata_device *adev = ap->link.device;
+ adev->flags |= ATA_DFLAG_NCQ_OFF;
+ scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+ #endif
+ }
+ return 0;
+}
+
+void mvs_scan_start(struct Scsi_Host *shost)
+{
+ int i, j;
+ unsigned short core_nr;
+ struct mvs_info *mvi;
+ struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+ core_nr = ((struct mvs_prv_info *)sha->lldd_ha)->n_host;
+
+ for (j = 0; j < core_nr; j++) {
+ mvi = ((struct mvs_prv_info *)sha->lldd_ha)->mvi[j];
+ for (i = 0; i < mvi->chip->n_phy; ++i)
+ mvs_bytes_dmaed(mvi, i);
+ }
+}
+
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+ /* give the phy enabling interrupt event time to come in (1s
+ * is empirically about all it takes) */
+ if (time < HZ)
+ return 0;
+ /* Wait for discovery to finish */
+ scsi_flush_work(shost);
+ return 1;
+}
+
+static int mvs_task_prep_smp(struct mvs_info *mvi,
+ struct mvs_task_exec_info *tei)
+{
+ int elem, rc, i;
+ struct sas_task *task = tei->task;
+ struct mvs_cmd_hdr *hdr = tei->hdr;
+ struct domain_device *dev = task->dev;
+ struct asd_sas_port *sas_port = dev->port;
+ struct scatterlist *sg_req, *sg_resp;
+ u32 req_len, resp_len, tag = tei->tag;
+ void *buf_tmp;
+ u8 *buf_oaf;
+ dma_addr_t buf_tmp_dma;
+ void *buf_prd;
+ struct mvs_slot_info *slot = &mvi->slot_info[tag];
+ u32 flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#if _MV_DUMP
+ u8 *buf_cmd;
+ void *from;
+#endif
+ /*
+ * DMA-map SMP request, response buffers
+ */
+ sg_req = &task->smp_task.smp_req;
+ elem = dma_map_sg(mvi->dev, sg_req, 1, PCI_DMA_TODEVICE);
+ if (!elem)
+ return -ENOMEM;
+ req_len = sg_dma_len(sg_req);
+
+ sg_resp = &task->smp_task.smp_resp;
+ elem = dma_map_sg(mvi->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+ if (!elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ resp_len = SB_RFB_MAX;
+
+ /* must be in dwords */
+ if ((req_len & 0x3) || (resp_len & 0x3)) {
+ rc = -EINVAL;
+ goto err_out_2;
+ }
+
+ /*
+ * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+ */
+
+ /* region 1: command table area (MVS_SSP_CMD_SZ bytes) ***** */
+ buf_tmp = slot->buf;
+ buf_tmp_dma = slot->buf_dma;
+
+#if _MV_DUMP
+ buf_cmd = buf_tmp;
+ hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+ buf_tmp += req_len;
+ buf_tmp_dma += req_len;
+ slot->cmd_size = req_len;
+#else
+ hdr->cmd_tbl = cpu_to_le64(sg_dma_address(sg_req));
+#endif
+
+ /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+ buf_oaf = buf_tmp;
+ hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_OAF_SZ;
+ buf_tmp_dma += MVS_OAF_SZ;
+
+ /* region 3: PRD table *********************************** */
+ buf_prd = buf_tmp;
+ if (tei->n_elem)
+ hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+ else
+ hdr->prd_tbl = 0;
+
+ i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+ buf_tmp += i;
+ buf_tmp_dma += i;
+
+ /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+ slot->response = buf_tmp;
+ hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+ if (mvi->flags & MVF_FLAG_SOC)
+ hdr->reserved[0] = 0;
+
+ /*
+ * Fill in TX ring and command slot header
+ */
+ slot->tx = mvi->tx_prod;
+ mvi->tx[mvi->tx_prod] = cpu_to_le32((TXQ_CMD_SMP << TXQ_CMD_SHIFT) |
+ TXQ_MODE_I | tag |
+ (sas_port->phy_mask << TXQ_PHY_SHIFT));
+
+ hdr->flags |= flags;
+ hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | ((req_len - 4) / 4));
+ hdr->tags = cpu_to_le32(tag);
+ hdr->data_len = 0;
+
+ /* generate open address frame hdr (first 12 bytes) */
+ /* initiator, SMP, ftype 1h */
+ buf_oaf[0] = (1 << 7) | (PROTOCOL_SMP << 4) | 0x01;
+ buf_oaf[1] = dev->linkrate & 0xf;
+ *(u16 *)(buf_oaf + 2) = 0xFFFF; /* SAS SPEC */
+ memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+
+#if _MV_DUMP
+ /* copy cmd table */
+ from = kmap_atomic(sg_page(sg_req), KM_IRQ0);
+ memcpy(buf_cmd, from + sg_req->offset, req_len);
+ kunmap_atomic(from, KM_IRQ0);
+#endif
+ return 0;
+
+err_out_2:
+ dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+err_out:
+ dma_unmap_sg(mvi->dev, &tei->task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ return rc;
+}
+
+static u32 mvs_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+ struct ata_queued_cmd *qc = task->uldd_task;
+
+ if (qc) {
+ if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+ qc->tf.command == ATA_CMD_FPDMA_READ) {
+ *tag = qc->tag;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static int mvs_task_prep_ata(struct mvs_info *mvi,
+ struct mvs_task_exec_info *tei)
+{
+ struct sas_task *task = tei->task;
+ struct domain_device *dev = task->dev;
+ struct mvs_device *mvi_dev = dev->lldd_dev;
+ struct mvs_cmd_hdr *hdr = tei->hdr;
+ struct asd_sas_port *sas_port = dev->port;
+ struct mvs_slot_info *slot;
+ void *buf_prd;
+ u32 tag = tei->tag, hdr_tag;
+ u32 flags, del_q;
+ void *buf_tmp;
+ u8 *buf_cmd, *buf_oaf;
+ dma_addr_t buf_tmp_dma;
+ u32 i, req_len, resp_len;
+ const u32 max_resp_len = SB_RFB_MAX;
+
+ if (mvs_assign_reg_set(mvi, mvi_dev) == MVS_ID_NOT_MAPPED) {
+ mv_dprintk("Have not enough regiset for dev %d.\n",
+ mvi_dev->device_id);
+ return -EBUSY;
+ }
+ slot = &mvi->slot_info[tag];
+ slot->tx = mvi->tx_prod;
+ del_q = TXQ_MODE_I | tag |
+ (TXQ_CMD_STP << TXQ_CMD_SHIFT) |
+ (sas_port->phy_mask << TXQ_PHY_SHIFT) |
+ (mvi_dev->taskfileset << TXQ_SRS_SHIFT);
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(del_q);
+
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ if (task->data_dir == DMA_FROM_DEVICE)
+ flags = (MVS_CHIP_DISP->prd_count() << MCH_PRD_LEN_SHIFT);
+ else
+ flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#else
+ flags = (tei->n_elem << MCH_PRD_LEN_SHIFT);
+#endif
+ if (task->ata_task.use_ncq)
+ flags |= MCH_FPDMA;
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET) {
+ if (task->ata_task.fis.command != ATA_CMD_ID_ATAPI)
+ flags |= MCH_ATAPI;
+ }
+
+ /* FIXME: fill in port multiplier number */
+
+ hdr->flags = cpu_to_le32(flags);
+
+ /* FIXME: the low order order 5 bits for the TAG if enable NCQ */
+ if (task->ata_task.use_ncq && mvs_get_ncq_tag(task, &hdr_tag))
+ task->ata_task.fis.sector_count |= (u8) (hdr_tag << 3);
+ else
+ hdr_tag = tag;
+
+ hdr->tags = cpu_to_le32(hdr_tag);
+
+ hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+ /*
+ * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+ */
+
+ /* region 1: command table area (MVS_ATA_CMD_SZ bytes) ************** */
+ buf_cmd = buf_tmp = slot->buf;
+ buf_tmp_dma = slot->buf_dma;
+
+ hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_ATA_CMD_SZ;
+ buf_tmp_dma += MVS_ATA_CMD_SZ;
+#if _MV_DUMP
+ slot->cmd_size = MVS_ATA_CMD_SZ;
+#endif
+
+ /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+ /* used for STP. unused for SATA? */
+ buf_oaf = buf_tmp;
+ hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_OAF_SZ;
+ buf_tmp_dma += MVS_OAF_SZ;
+
+ /* region 3: PRD table ********************************************* */
+ buf_prd = buf_tmp;
+
+ if (tei->n_elem)
+ hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+ else
+ hdr->prd_tbl = 0;
+ i = MVS_CHIP_DISP->prd_size() * MVS_CHIP_DISP->prd_count();
+
+ buf_tmp += i;
+ buf_tmp_dma += i;
+
+ /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+ /* FIXME: probably unused, for SATA. kept here just in case
+ * we get a STP/SATA error information record
+ */
+ slot->response = buf_tmp;
+ hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+ if (mvi->flags & MVF_FLAG_SOC)
+ hdr->reserved[0] = 0;
+
+ req_len = sizeof(struct host_to_dev_fis);
+ resp_len = MVS_SLOT_BUF_SZ - MVS_ATA_CMD_SZ -
+ sizeof(struct mvs_err_info) - i;
+
+ /* request, response lengths */
+ resp_len = min(resp_len, max_resp_len);
+ hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+ if (likely(!task->ata_task.device_control_reg_update))
+ task->ata_task.fis.flags |= 0x80; /* C=1: update ATA cmd reg */
+ /* fill in command FIS and ATAPI CDB */
+ memcpy(buf_cmd, &task->ata_task.fis, sizeof(struct host_to_dev_fis));
+ if (dev->sata_dev.command_set == ATAPI_COMMAND_SET)
+ memcpy(buf_cmd + STP_ATAPI_CMD,
+ task->ata_task.atapi_packet, 16);
+
+ /* generate open address frame hdr (first 12 bytes) */
+ /* initiator, STP, ftype 1h */
+ buf_oaf[0] = (1 << 7) | (PROTOCOL_STP << 4) | 0x1;
+ buf_oaf[1] = dev->linkrate & 0xf;
+ *(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+ memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+ /* fill in PRD (scatter/gather) table, if any */
+ MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ if (task->data_dir == DMA_FROM_DEVICE)
+ MVS_CHIP_DISP->dma_fix(mvi->bulk_buffer_dma,
+ TRASH_BUCKET_SIZE, tei->n_elem, buf_prd);
+#endif
+ return 0;
+}
+
+static int mvs_task_prep_ssp(struct mvs_info *mvi,
+ struct mvs_task_exec_info *tei, int is_tmf,
+ struct mvs_tmf_task *tmf)
+{
+ struct sas_task *task = tei->task;
+ struct mvs_cmd_hdr *hdr = tei->hdr;
+ struct mvs_port *port = tei->port;
+ struct domain_device *dev = task->dev;
+ struct mvs_device *mvi_dev = dev->lldd_dev;
+ struct asd_sas_port *sas_port = dev->port;
+ struct mvs_slot_info *slot;
+ void *buf_prd;
+ struct ssp_frame_hdr *ssp_hdr;
+ void *buf_tmp;
+ u8 *buf_cmd, *buf_oaf, fburst = 0;
+ dma_addr_t buf_tmp_dma;
+ u32 flags;
+ u32 resp_len, req_len, i, tag = tei->tag;
+ const u32 max_resp_len = SB_RFB_MAX;
+ u32 phy_mask;
+
+ slot = &mvi->slot_info[tag];
+
+ phy_mask = ((port->wide_port_phymap) ? port->wide_port_phymap :
+ sas_port->phy_mask) & TXQ_PHY_MASK;
+
+ slot->tx = mvi->tx_prod;
+ mvi->tx[mvi->tx_prod] = cpu_to_le32(TXQ_MODE_I | tag |
+ (TXQ_CMD_SSP << TXQ_CMD_SHIFT) |
+ (phy_mask << TXQ_PHY_SHIFT));
+
+ flags = MCH_RETRY;
+ if (task->ssp_task.enable_first_burst) {
+ flags |= MCH_FBURST;
+ fburst = (1 << 7);
+ }
+ if (is_tmf)
+ flags |= (MCH_SSP_FR_TASK << MCH_SSP_FR_TYPE_SHIFT);
+ else
+ flags |= (MCH_SSP_FR_CMD << MCH_SSP_FR_TYPE_SHIFT);
+ hdr->flags = cpu_to_le32(flags | (tei->n_elem << MCH_PRD_LEN_SHIFT));
+ hdr->tags = cpu_to_le32(tag);
+ hdr->data_len = cpu_to_le32(task->total_xfer_len);
+
+ /*
+ * arrange MVS_SLOT_BUF_SZ-sized DMA buffer according to our needs
+ */
+
+ /* region 1: command table area (MVS_SSP_CMD_SZ bytes) ************** */
+ buf_cmd = buf_tmp = slot->buf;
+ buf_tmp_dma = slot->buf_dma;
+
+ hdr->cmd_tbl = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_SSP_CMD_SZ;
+ buf_tmp_dma += MVS_SSP_CMD_SZ;
+#if _MV_DUMP
+ slot->cmd_size = MVS_SSP_CMD_SZ;
+#endif
+
+ /* region 2: open address frame area (MVS_OAF_SZ bytes) ********* */
+ buf_oaf = buf_tmp;
+ hdr->open_frame = cpu_to_le64(buf_tmp_dma);
+
+ buf_tmp += MVS_OAF_SZ;
+ buf_tmp_dma += MVS_OAF_SZ;
+
+ /* region 3: PRD table ********************************************* */
+ buf_prd = buf_tmp;
+ if (tei->n_elem)
+ hdr->prd_tbl = cpu_to_le64(buf_tmp_dma);
+ else
+ hdr->prd_tbl = 0;
+
+ i = MVS_CHIP_DISP->prd_size() * tei->n_elem;
+ buf_tmp += i;
+ buf_tmp_dma += i;
+
+ /* region 4: status buffer (larger the PRD, smaller this buf) ****** */
+ slot->response = buf_tmp;
+ hdr->status_buf = cpu_to_le64(buf_tmp_dma);
+ if (mvi->flags & MVF_FLAG_SOC)
+ hdr->reserved[0] = 0;
+
+ resp_len = MVS_SLOT_BUF_SZ - MVS_SSP_CMD_SZ - MVS_OAF_SZ -
+ sizeof(struct mvs_err_info) - i;
+ resp_len = min(resp_len, max_resp_len);
+
+ req_len = sizeof(struct ssp_frame_hdr) + 28;
+
+ /* request, response lengths */
+ hdr->lens = cpu_to_le32(((resp_len / 4) << 16) | (req_len / 4));
+
+ /* generate open address frame hdr (first 12 bytes) */
+ /* initiator, SSP, ftype 1h */
+ buf_oaf[0] = (1 << 7) | (PROTOCOL_SSP << 4) | 0x1;
+ buf_oaf[1] = dev->linkrate & 0xf;
+ *(u16 *)(buf_oaf + 2) = cpu_to_be16(mvi_dev->device_id + 1);
+ memcpy(buf_oaf + 4, dev->sas_addr, SAS_ADDR_SIZE);
+
+ /* fill in SSP frame header (Command Table.SSP frame header) */
+ ssp_hdr = (struct ssp_frame_hdr *)buf_cmd;
+
+ if (is_tmf)
+ ssp_hdr->frame_type = SSP_TASK;
+ else
+ ssp_hdr->frame_type = SSP_COMMAND;
+
+ memcpy(ssp_hdr->hashed_dest_addr, dev->hashed_sas_addr,
+ HASHED_SAS_ADDR_SIZE);
+ memcpy(ssp_hdr->hashed_src_addr,
+ dev->hashed_sas_addr, HASHED_SAS_ADDR_SIZE);
+ ssp_hdr->tag = cpu_to_be16(tag);
+
+ /* fill in IU for TASK and Command Frame */
+ buf_cmd += sizeof(*ssp_hdr);
+ memcpy(buf_cmd, &task->ssp_task.LUN, 8);
+
+ if (ssp_hdr->frame_type != SSP_TASK) {
+ buf_cmd[9] = fburst | task->ssp_task.task_attr |
+ (task->ssp_task.task_prio << 3);
+ memcpy(buf_cmd + 12, &task->ssp_task.cdb, 16);
+ } else{
+ buf_cmd[10] = tmf->tmf;
+ switch (tmf->tmf) {
+ case TMF_ABORT_TASK:
+ case TMF_QUERY_TASK:
+ buf_cmd[12] =
+ (tmf->tag_of_task_to_be_managed >> 8) & 0xff;
+ buf_cmd[13] =
+ tmf->tag_of_task_to_be_managed & 0xff;
+ break;
+ default:
+ break;
+ }
+ }
+ /* fill in PRD (scatter/gather) table, if any */
+ MVS_CHIP_DISP->make_prd(task->scatter, tei->n_elem, buf_prd);
+ return 0;
+}
+
+#define DEV_IS_GONE(mvi_dev) ((!mvi_dev || (mvi_dev->dev_type == NO_DEVICE)))
+static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+ struct completion *completion,int is_tmf,
+ struct mvs_tmf_task *tmf)
+{
+ struct domain_device *dev = task->dev;
+ struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+ struct mvs_info *mvi = mvi_dev->mvi_info;
+ struct mvs_task_exec_info tei;
+ struct sas_task *t = task;
+ struct mvs_slot_info *slot;
+ u32 tag = 0xdeadbeef, rc, n_elem = 0;
+ u32 n = num, pass = 0;
+ unsigned long flags = 0;
+
+ if (!dev->port) {
+ struct task_status_struct *tsm = &t->task_status;
+
+ tsm->resp = SAS_TASK_UNDELIVERED;
+ tsm->stat = SAS_PHY_DOWN;
+ t->task_done(t);
+ return 0;
+ }
+
+ spin_lock_irqsave(&mvi->lock, flags);
+ do {
+ dev = t->dev;
+ mvi_dev = dev->lldd_dev;
+ if (DEV_IS_GONE(mvi_dev)) {
+ if (mvi_dev)
+ mv_dprintk("device %d not ready.\n",
+ mvi_dev->device_id);
+ else
+ mv_dprintk("device %016llx not ready.\n",
+ SAS_ADDR(dev->sas_addr));
+
+ rc = SAS_PHY_DOWN;
+ goto out_done;
+ }
+
+ if (dev->port->id >= mvi->chip->n_phy)
+ tei.port = &mvi->port[dev->port->id - mvi->chip->n_phy];
+ else
+ tei.port = &mvi->port[dev->port->id];
+
+ if (!tei.port->port_attached) {
+ if (sas_protocol_ata(t->task_proto)) {
+ mv_dprintk("port %d does not"
+ "attached device.\n", dev->port->id);
+ rc = SAS_PHY_DOWN;
+ goto out_done;
+ } else {
+ struct task_status_struct *ts = &t->task_status;
+ ts->resp = SAS_TASK_UNDELIVERED;
+ ts->stat = SAS_PHY_DOWN;
+ t->task_done(t);
+ if (n > 1)
+ t = list_entry(t->list.next,
+ struct sas_task, list);
+ continue;
+ }
+ }
+
+ if (!sas_protocol_ata(t->task_proto)) {
+ if (t->num_scatter) {
+ n_elem = dma_map_sg(mvi->dev,
+ t->scatter,
+ t->num_scatter,
+ t->data_dir);
+ if (!n_elem) {
+ rc = -ENOMEM;
+ goto err_out;
+ }
+ }
+ } else {
+ n_elem = t->num_scatter;
+ }
+
+ rc = mvs_tag_alloc(mvi, &tag);
+ if (rc)
+ goto err_out;
+
+ slot = &mvi->slot_info[tag];
+
+
+ t->lldd_task = NULL;
+ slot->n_elem = n_elem;
+ slot->slot_tag = tag;
+ memset(slot->buf, 0, MVS_SLOT_BUF_SZ);
+
+ tei.task = t;
+ tei.hdr = &mvi->slot[tag];
+ tei.tag = tag;
+ tei.n_elem = n_elem;
+ switch (t->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ rc = mvs_task_prep_smp(mvi, &tei);
+ break;
+ case SAS_PROTOCOL_SSP:
+ rc = mvs_task_prep_ssp(mvi, &tei, is_tmf, tmf);
+ break;
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ rc = mvs_task_prep_ata(mvi, &tei);
+ break;
+ default:
+ dev_printk(KERN_ERR, mvi->dev,
+ "unknown sas_task proto: 0x%x\n",
+ t->task_proto);
+ rc = -EINVAL;
+ break;
+ }
+
+ if (rc) {
+ mv_dprintk("rc is %x\n", rc);
+ goto err_out_tag;
+ }
+ slot->task = t;
+ slot->port = tei.port;
+ t->lldd_task = slot;
+ list_add_tail(&slot->entry, &tei.port->list);
+ /* TODO: select normal or high priority */
+ spin_lock(&t->task_state_lock);
+ t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock(&t->task_state_lock);
+
+ mvs_hba_memory_dump(mvi, tag, t->task_proto);
+ mvi_dev->runing_req++;
+ ++pass;
+ mvi->tx_prod = (mvi->tx_prod + 1) & (MVS_CHIP_SLOT_SZ - 1);
+ if (n > 1)
+ t = list_entry(t->list.next, struct sas_task, list);
+ } while (--n);
+ rc = 0;
+ goto out_done;
+
+err_out_tag:
+ mvs_tag_free(mvi, tag);
+err_out:
+
+ dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
+ if (!sas_protocol_ata(t->task_proto))
+ if (n_elem)
+ dma_unmap_sg(mvi->dev, t->scatter, n_elem,
+ t->data_dir);
+out_done:
+ if (likely(pass)) {
+ MVS_CHIP_DISP->start_delivery(mvi,
+ (mvi->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
+ }
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ return rc;
+}
+
+int mvs_queue_command(struct sas_task *task, const int num,
+ gfp_t gfp_flags)
+{
+ return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+}
+
+static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
+{
+ u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+ mvs_tag_clear(mvi, slot_idx);
+}
+
+static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
+ struct mvs_slot_info *slot, u32 slot_idx)
+{
+ if (!slot->task)
+ return;
+ if (!sas_protocol_ata(task->task_proto))
+ if (slot->n_elem)
+ dma_unmap_sg(mvi->dev, task->scatter,
+ slot->n_elem, task->data_dir);
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SMP:
+ dma_unmap_sg(mvi->dev, &task->smp_task.smp_resp, 1,
+ PCI_DMA_FROMDEVICE);
+ dma_unmap_sg(mvi->dev, &task->smp_task.smp_req, 1,
+ PCI_DMA_TODEVICE);
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SSP:
+ default:
+ /* do nothing */
+ break;
+ }
+ list_del_init(&slot->entry);
+ task->lldd_task = NULL;
+ slot->task = NULL;
+ slot->port = NULL;
+ slot->slot_tag = 0xFFFFFFFF;
+ mvs_slot_free(mvi, slot_idx);
+}
+
+static void mvs_update_wideport(struct mvs_info *mvi, int i)
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct mvs_port *port = phy->port;
+ int j, no;
+
+ for_each_phy(port->wide_port_phymap, j, no) {
+ if (j & 1) {
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+ PHYR_WIDE_PORT);
+ MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+ port->wide_port_phymap);
+ } else {
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, no,
+ PHYR_WIDE_PORT);
+ MVS_CHIP_DISP->write_port_cfg_data(mvi, no,
+ 0);
+ }
+ }
+}
+
+static u32 mvs_is_phy_ready(struct mvs_info *mvi, int i)
+{
+ u32 tmp;
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct mvs_port *port = phy->port;
+
+ tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, i);
+ if ((tmp & PHY_READY_MASK) && !(phy->irq_status & PHYEV_POOF)) {
+ if (!port)
+ phy->phy_attached = 1;
+ return tmp;
+ }
+
+ if (port) {
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ port->wide_port_phymap &= ~(1U << i);
+ if (!port->wide_port_phymap)
+ port->port_attached = 0;
+ mvs_update_wideport(mvi, i);
+ } else if (phy->phy_type & PORT_TYPE_SATA)
+ port->port_attached = 0;
+ phy->port = NULL;
+ phy->phy_attached = 0;
+ phy->phy_type &= ~(PORT_TYPE_SAS | PORT_TYPE_SATA);
+ }
+ return 0;
+}
+
+static void *mvs_get_d2h_reg(struct mvs_info *mvi, int i, void *buf)
+{
+ u32 *s = (u32 *) buf;
+
+ if (!s)
+ return NULL;
+
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG3);
+ s[3] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG2);
+ s[2] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG1);
+ s[1] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+ MVS_CHIP_DISP->write_port_cfg_addr(mvi, i, PHYR_SATA_SIG0);
+ s[0] = MVS_CHIP_DISP->read_port_cfg_data(mvi, i);
+
+ /* Workaround: take some ATAPI devices for ATA */
+ if (((s[1] & 0x00FFFFFF) == 0x00EB1401) && (*(u8 *)&s[3] == 0x01))
+ s[1] = 0x00EB1401 | (*((u8 *)&s[1] + 3) & 0x10);
+
+ return s;
+}
+
+static u32 mvs_is_sig_fis_received(u32 irq_status)
+{
+ return irq_status & PHYEV_SIG_FIS;
+}
+
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st)
+{
+ struct mvs_phy *phy = &mvi->phy[i];
+ struct sas_identify_frame *id;
+
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+
+ if (get_st) {
+ phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, i);
+ phy->phy_status = mvs_is_phy_ready(mvi, i);
+ }
+
+ if (phy->phy_status) {
+ int oob_done = 0;
+ struct asd_sas_phy *sas_phy = &mvi->phy[i].sas_phy;
+
+ oob_done = MVS_CHIP_DISP->oob_done(mvi, i);
+
+ MVS_CHIP_DISP->fix_phy_info(mvi, i, id);
+ if (phy->phy_type & PORT_TYPE_SATA) {
+ phy->identify.target_port_protocols = SAS_PROTOCOL_STP;
+ if (mvs_is_sig_fis_received(phy->irq_status)) {
+ phy->phy_attached = 1;
+ phy->att_dev_sas_addr =
+ i + mvi->id * mvi->chip->n_phy;
+ if (oob_done)
+ sas_phy->oob_mode = SATA_OOB_MODE;
+ phy->frame_rcvd_size =
+ sizeof(struct dev_to_host_fis);
+ mvs_get_d2h_reg(mvi, i, id);
+ } else {
+ u32 tmp;
+ dev_printk(KERN_DEBUG, mvi->dev,
+ "Phy%d : No sig fis\n", i);
+ tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, i);
+ MVS_CHIP_DISP->write_port_irq_mask(mvi, i,
+ tmp | PHYEV_SIG_FIS);
+ phy->phy_attached = 0;
+ phy->phy_type &= ~PORT_TYPE_SATA;
+ MVS_CHIP_DISP->phy_reset(mvi, i, 0);
+ goto out_done;
+ }
+ } else if (phy->phy_type & PORT_TYPE_SAS
+ || phy->att_dev_info & PORT_SSP_INIT_MASK) {
+ phy->phy_attached = 1;
+ phy->identify.device_type =
+ phy->att_dev_info & PORT_DEV_TYPE_MASK;
+
+ if (phy->identify.device_type == SAS_END_DEV)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SSP;
+ else if (phy->identify.device_type != NO_DEVICE)
+ phy->identify.target_port_protocols =
+ SAS_PROTOCOL_SMP;
+ if (oob_done)
+ sas_phy->oob_mode = SAS_OOB_MODE;
+ phy->frame_rcvd_size =
+ sizeof(struct sas_identify_frame);
+ }
+ memcpy(sas_phy->attached_sas_addr,
+ &phy->att_dev_sas_addr, SAS_ADDR_SIZE);
+
+ if (MVS_CHIP_DISP->phy_work_around)
+ MVS_CHIP_DISP->phy_work_around(mvi, i);
+ }
+ mv_dprintk("port %d attach dev info is %x\n",
+ i + mvi->id * mvi->chip->n_phy, phy->att_dev_info);
+ mv_dprintk("port %d attach sas addr is %llx\n",
+ i + mvi->id * mvi->chip->n_phy, phy->att_dev_sas_addr);
+out_done:
+ if (get_st)
+ MVS_CHIP_DISP->write_port_irq_stat(mvi, i, phy->irq_status);
+}
+
+static void mvs_port_notify_formed(struct asd_sas_phy *sas_phy, int lock)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct mvs_info *mvi = NULL; int i = 0, hi;
+ struct mvs_phy *phy = sas_phy->lldd_phy;
+ struct asd_sas_port *sas_port = sas_phy->port;
+ struct mvs_port *port;
+ unsigned long flags = 0;
+ if (!sas_port)
+ return;
+
+ while (sas_ha->sas_phy[i]) {
+ if (sas_ha->sas_phy[i] == sas_phy)
+ break;
+ i++;
+ }
+ hi = i/((struct mvs_prv_info *)sas_ha->lldd_ha)->n_phy;
+ mvi = ((struct mvs_prv_info *)sas_ha->lldd_ha)->mvi[hi];
+ if (sas_port->id >= mvi->chip->n_phy)
+ port = &mvi->port[sas_port->id - mvi->chip->n_phy];
+ else
+ port = &mvi->port[sas_port->id];
+ if (lock)
+ spin_lock_irqsave(&mvi->lock, flags);
+ port->port_attached = 1;
+ phy->port = port;
+ if (phy->phy_type & PORT_TYPE_SAS) {
+ port->wide_port_phymap = sas_port->phy_mask;
+ mv_printk("set wide port phy map %x\n", sas_port->phy_mask);
+ mvs_update_wideport(mvi, sas_phy->id);
+ }
+ if (lock)
+ spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+static void mvs_port_notify_deformed(struct asd_sas_phy *sas_phy, int lock)
+{
+ /*Nothing*/
+}
+
+
+void mvs_port_formed(struct asd_sas_phy *sas_phy)
+{
+ mvs_port_notify_formed(sas_phy, 1);
+}
+
+void mvs_port_deformed(struct asd_sas_phy *sas_phy)
+{
+ mvs_port_notify_deformed(sas_phy, 1);
+}
+
+struct mvs_device *mvs_alloc_dev(struct mvs_info *mvi)
+{
+ u32 dev;
+ for (dev = 0; dev < MVS_MAX_DEVICES; dev++) {
+ if (mvi->devices[dev].dev_type == NO_DEVICE) {
+ mvi->devices[dev].device_id = dev;
+ return &mvi->devices[dev];
+ }
+ }
+
+ if (dev == MVS_MAX_DEVICES)
+ mv_printk("max support %d devices, ignore ..\n",
+ MVS_MAX_DEVICES);
+
+ return NULL;
+}
+
+void mvs_free_dev(struct mvs_device *mvi_dev)
+{
+ u32 id = mvi_dev->device_id;
+ memset(mvi_dev, 0, sizeof(*mvi_dev));
+ mvi_dev->device_id = id;
+ mvi_dev->dev_type = NO_DEVICE;
+ mvi_dev->dev_status = MVS_DEV_NORMAL;
+ mvi_dev->taskfileset = MVS_ID_NOT_MAPPED;
+}
+
+int mvs_dev_found_notify(struct domain_device *dev, int lock)
+{
+ unsigned long flags = 0;
+ int res = 0;
+ struct mvs_info *mvi = NULL;
+ struct domain_device *parent_dev = dev->parent;
+ struct mvs_device *mvi_device;
+
+ mvi = mvs_find_dev_mvi(dev);
+
+ if (lock)
+ spin_lock_irqsave(&mvi->lock, flags);
+
+ mvi_device = mvs_alloc_dev(mvi);
+ if (!mvi_device) {
+ res = -1;
+ goto found_out;
+ }
+ dev->lldd_dev = mvi_device;
+ mvi_device->dev_type = dev->dev_type;
+ mvi_device->mvi_info = mvi;
+ if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+ int phy_id;
+ u8 phy_num = parent_dev->ex_dev.num_phys;
+ struct ex_phy *phy;
+ for (phy_id = 0; phy_id < phy_num; phy_id++) {
+ phy = &parent_dev->ex_dev.ex_phy[phy_id];
+ if (SAS_ADDR(phy->attached_sas_addr) ==
+ SAS_ADDR(dev->sas_addr)) {
+ mvi_device->attached_phy = phy_id;
+ break;
+ }
+ }
+
+ if (phy_id == phy_num) {
+ mv_printk("Error: no attached dev:%016llx"
+ "at ex:%016llx.\n",
+ SAS_ADDR(dev->sas_addr),
+ SAS_ADDR(parent_dev->sas_addr));
+ res = -1;
+ }
+ }
+
+found_out:
+ if (lock)
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ return res;
+}
+
+int mvs_dev_found(struct domain_device *dev)
+{
+ return mvs_dev_found_notify(dev, 1);
+}
+
+void mvs_dev_gone_notify(struct domain_device *dev, int lock)
+{
+ unsigned long flags = 0;
+ struct mvs_device *mvi_dev = dev->lldd_dev;
+ struct mvs_info *mvi = mvi_dev->mvi_info;
+
+ if (lock)
+ spin_lock_irqsave(&mvi->lock, flags);
+
+ if (mvi_dev) {
+ mv_dprintk("found dev[%d:%x] is gone.\n",
+ mvi_dev->device_id, mvi_dev->dev_type);
+ mvs_free_reg_set(mvi, mvi_dev);
+ mvs_free_dev(mvi_dev);
+ } else {
+ mv_dprintk("found dev has gone.\n");
+ }
+ dev->lldd_dev = NULL;
+
+ if (lock)
+ spin_unlock_irqrestore(&mvi->lock, flags);
+}
+
+
+void mvs_dev_gone(struct domain_device *dev)
+{
+ mvs_dev_gone_notify(dev, 1);
+}
+
+static struct sas_task *mvs_alloc_task(void)
+{
+ struct sas_task *task = kzalloc(sizeof(struct sas_task), GFP_KERNEL);
+
+ if (task) {
+ INIT_LIST_HEAD(&task->list);
+ spin_lock_init(&task->task_state_lock);
+ task->task_state_flags = SAS_TASK_STATE_PENDING;
+ init_timer(&task->timer);
+ init_completion(&task->completion);
+ }
+ return task;
+}
+
+static void mvs_free_task(struct sas_task *task)
+{
+ if (task) {
+ BUG_ON(!list_empty(&task->list));
+ kfree(task);
+ }
+}
+
+static void mvs_task_done(struct sas_task *task)
+{
+ if (!del_timer(&task->timer))
+ return;
+ complete(&task->completion);
+}
+
+static void mvs_tmf_timedout(unsigned long data)
+{
+ struct sas_task *task = (struct sas_task *)data;
+
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ complete(&task->completion);
+}
+
+/* XXX */
+#define MVS_TASK_TIMEOUT 20
+static int mvs_exec_internal_tmf_task(struct domain_device *dev,
+ void *parameter, u32 para_len, struct mvs_tmf_task *tmf)
+{
+ int res, retry;
+ struct sas_task *task = NULL;
+
+ for (retry = 0; retry < 3; retry++) {
+ task = mvs_alloc_task();
+ if (!task)
+ return -ENOMEM;
+
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+
+ memcpy(&task->ssp_task, parameter, para_len);
+ task->task_done = mvs_task_done;
+
+ task->timer.data = (unsigned long) task;
+ task->timer.function = mvs_tmf_timedout;
+ task->timer.expires = jiffies + MVS_TASK_TIMEOUT*HZ;
+ add_timer(&task->timer);
+
+ res = mvs_task_exec(task, 1, GFP_KERNEL, NULL, 1, tmf);
+
+ if (res) {
+ del_timer(&task->timer);
+ mv_printk("executing internel task failed:%d\n", res);
+ goto ex_err;
+ }
+
+ wait_for_completion(&task->completion);
+ res = -TMF_RESP_FUNC_FAILED;
+ /* Even TMF timed out, return direct. */
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ mv_printk("TMF task[%x] timeout.\n", tmf->tmf);
+ goto ex_err;
+ }
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_GOOD) {
+ res = TMF_RESP_FUNC_COMPLETE;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_UNDERRUN) {
+ /* no error, but return the number of bytes of
+ * underrun */
+ res = task->task_status.residual;
+ break;
+ }
+
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAS_DATA_OVERRUN) {
+ mv_dprintk("blocked task error.\n");
+ res = -EMSGSIZE;
+ break;
+ } else {
+ mv_dprintk(" task to dev %016llx response: 0x%x "
+ "status 0x%x\n",
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ mvs_free_task(task);
+ task = NULL;
+
+ }
+ }
+ex_err:
+ BUG_ON(retry == 3 && task != NULL);
+ if (task != NULL)
+ mvs_free_task(task);
+ return res;
+}
+
+static int mvs_debug_issue_ssp_tmf(struct domain_device *dev,
+ u8 *lun, struct mvs_tmf_task *tmf)
+{
+ struct sas_ssp_task ssp_task;
+ DECLARE_COMPLETION_ONSTACK(completion);
+ if (!(dev->tproto & SAS_PROTOCOL_SSP))
+ return TMF_RESP_FUNC_ESUPP;
+
+ strncpy((u8 *)&ssp_task.LUN, lun, 8);
+
+ return mvs_exec_internal_tmf_task(dev, &ssp_task,
+ sizeof(ssp_task), tmf);
+}
+
+
+/* Standard mandates link reset for ATA (type 0)
+ and hard reset for SSP (type 1) , only for RECOVERY */
+static int mvs_debug_I_T_nexus_reset(struct domain_device *dev)
+{
+ int rc;
+ struct sas_phy *phy = sas_find_local_phy(dev);
+ int reset_type = (dev->dev_type == SATA_DEV ||
+ (dev->tproto & SAS_PROTOCOL_STP)) ? 0 : 1;
+ rc = sas_phy_reset(phy, reset_type);
+ msleep(2000);
+ return rc;
+}
+
+/* mandatory SAM-3 */
+int mvs_lu_reset(struct domain_device *dev, u8 *lun)
+{
+ unsigned long flags;
+ int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+ struct mvs_tmf_task tmf_task;
+ struct mvs_device * mvi_dev = dev->lldd_dev;
+ struct mvs_info *mvi = mvi_dev->mvi_info;
+
+ tmf_task.tmf = TMF_LU_RESET;
+ mvi_dev->dev_status = MVS_DEV_EH;
+ rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ num = mvs_find_dev_phyno(dev, phyno);
+ spin_lock_irqsave(&mvi->lock, flags);
+ for (i = 0; i < num; i++)
+ mvs_release_task(mvi, phyno[i], dev);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ }
+ /* If failed, fall-through I_T_Nexus reset */
+ mv_printk("%s for device[%x]:rc= %d\n", __func__,
+ mvi_dev->device_id, rc);
+ return rc;
+}
+
+int mvs_I_T_nexus_reset(struct domain_device *dev)
+{
+ unsigned long flags;
+ int i, phyno[WIDE_PORT_MAX_PHY], num , rc = TMF_RESP_FUNC_FAILED;
+ struct mvs_device * mvi_dev = (struct mvs_device *)dev->lldd_dev;
+ struct mvs_info *mvi = mvi_dev->mvi_info;
+
+ if (mvi_dev->dev_status != MVS_DEV_EH)
+ return TMF_RESP_FUNC_COMPLETE;
+ rc = mvs_debug_I_T_nexus_reset(dev);
+ mv_printk("%s for device[%x]:rc= %d\n",
+ __func__, mvi_dev->device_id, rc);
+
+ /* housekeeper */
+ num = mvs_find_dev_phyno(dev, phyno);
+ spin_lock_irqsave(&mvi->lock, flags);
+ for (i = 0; i < num; i++)
+ mvs_release_task(mvi, phyno[i], dev);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+
+ return rc;
+}
+/* optional SAM-3 */
+int mvs_query_task(struct sas_task *task)
+{
+ u32 tag;
+ struct scsi_lun lun;
+ struct mvs_tmf_task tmf_task;
+ int rc = TMF_RESP_FUNC_FAILED;
+
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+ struct domain_device *dev = task->dev;
+ struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+ struct mvs_info *mvi = mvi_dev->mvi_info;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ rc = mvs_find_tag(mvi, task, &tag);
+ if (rc == 0) {
+ rc = TMF_RESP_FUNC_FAILED;
+ return rc;
+ }
+
+ tmf_task.tmf = TMF_QUERY_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+ switch (rc) {
+ /* The task is still in Lun, release it then */
+ case TMF_RESP_FUNC_SUCC:
+ /* The task is not in Lun or failed, reset the phy */
+ case TMF_RESP_FUNC_FAILED:
+ case TMF_RESP_FUNC_COMPLETE:
+ break;
+ }
+ }
+ mv_printk("%s:rc= %d\n", __func__, rc);
+ return rc;
+}
+
+/* mandatory SAM-3, still need free task/slot info */
+int mvs_abort_task(struct sas_task *task)
+{
+ struct scsi_lun lun;
+ struct mvs_tmf_task tmf_task;
+ struct domain_device *dev = task->dev;
+ struct mvs_device *mvi_dev = (struct mvs_device *)dev->lldd_dev;
+ struct mvs_info *mvi = mvi_dev->mvi_info;
+ int rc = TMF_RESP_FUNC_FAILED;
+ unsigned long flags;
+ u32 tag;
+
+ if (mvi->exp_req)
+ mvi->exp_req--;
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ rc = TMF_RESP_FUNC_COMPLETE;
+ goto out;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ if (task->lldd_task && task->task_proto & SAS_PROTOCOL_SSP) {
+ struct scsi_cmnd * cmnd = (struct scsi_cmnd *)task->uldd_task;
+
+ int_to_scsilun(cmnd->device->lun, &lun);
+ rc = mvs_find_tag(mvi, task, &tag);
+ if (rc == 0) {
+ mv_printk("No such tag in %s\n", __func__);
+ rc = TMF_RESP_FUNC_FAILED;
+ return rc;
+ }
+
+ tmf_task.tmf = TMF_ABORT_TASK;
+ tmf_task.tag_of_task_to_be_managed = cpu_to_le16(tag);
+
+ rc = mvs_debug_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+
+ /* if successful, clear the task and callback forwards.*/
+ if (rc == TMF_RESP_FUNC_COMPLETE) {
+ u32 slot_no;
+ struct mvs_slot_info *slot;
+
+ if (task->lldd_task) {
+ slot = task->lldd_task;
+ slot_no = (u32) (slot - mvi->slot_info);
+ mvs_slot_complete(mvi, slot_no, 1);
+ }
+ }
+ } else if (task->task_proto & SAS_PROTOCOL_SATA ||
+ task->task_proto & SAS_PROTOCOL_STP) {
+ /* to do free register_set */
+ } else {
+ /* SMP */
+
+ }
+out:
+ if (rc != TMF_RESP_FUNC_COMPLETE)
+ mv_printk("%s:rc= %d\n", __func__, rc);
+ return rc;
+}
+
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct mvs_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_ABORT_TASK_SET;
+ rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+ return rc;
+}
+
+int mvs_clear_aca(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct mvs_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_CLEAR_ACA;
+ rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+ return rc;
+}
+
+int mvs_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+ int rc = TMF_RESP_FUNC_FAILED;
+ struct mvs_tmf_task tmf_task;
+
+ tmf_task.tmf = TMF_CLEAR_TASK_SET;
+ rc = mvs_debug_issue_ssp_tmf(dev, lun, &tmf_task);
+
+ return rc;
+}
+
+static int mvs_sata_done(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx, int err)
+{
+ struct mvs_device *mvi_dev = task->dev->lldd_dev;
+ struct task_status_struct *tstat = &task->task_status;
+ struct ata_task_resp *resp = (struct ata_task_resp *)tstat->buf;
+ int stat = SAM_GOOD;
+
+
+ resp->frame_len = sizeof(struct dev_to_host_fis);
+ memcpy(&resp->ending_fis[0],
+ SATA_RECEIVED_D2H_FIS(mvi_dev->taskfileset),
+ sizeof(struct dev_to_host_fis));
+ tstat->buf_valid_size = sizeof(*resp);
+ if (unlikely(err))
+ stat = SAS_PROTO_RESPONSE;
+ return stat;
+}
+
+static int mvs_slot_err(struct mvs_info *mvi, struct sas_task *task,
+ u32 slot_idx)
+{
+ struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+ int stat;
+ u32 err_dw0 = le32_to_cpu(*(u32 *) (slot->response));
+ u32 tfs = 0;
+ enum mvs_port_type type = PORT_TYPE_SAS;
+
+ if (err_dw0 & CMD_ISS_STPD)
+ MVS_CHIP_DISP->issue_stop(mvi, type, tfs);
+
+ MVS_CHIP_DISP->command_active(mvi, slot_idx);
+
+ stat = SAM_CHECK_COND;
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ stat = SAS_ABORTED_TASK;
+ break;
+ case SAS_PROTOCOL_SMP:
+ stat = SAM_CHECK_COND;
+ break;
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+ {
+ if (err_dw0 == 0x80400002)
+ mv_printk("find reserved error, why?\n");
+
+ task->ata_task.use_ncq = 0;
+ stat = SAS_PROTO_RESPONSE;
+ mvs_sata_done(mvi, task, slot_idx, 1);
+
+ }
+ break;
+ default:
+ break;
+ }
+
+ return stat;
+}
+
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags)
+{
+ u32 slot_idx = rx_desc & RXQ_SLOT_MASK;
+ struct mvs_slot_info *slot = &mvi->slot_info[slot_idx];
+ struct sas_task *task = slot->task;
+ struct mvs_device *mvi_dev = NULL;
+ struct task_status_struct *tstat;
+
+ bool aborted;
+ void *to;
+ enum exec_status sts;
+
+ if (mvi->exp_req)
+ mvi->exp_req--;
+ if (unlikely(!task || !task->lldd_task))
+ return -1;
+
+ tstat = &task->task_status;
+ mvi_dev = task->dev->lldd_dev;
+
+ mvs_hba_cq_dump(mvi);
+
+ spin_lock(&task->task_state_lock);
+ task->task_state_flags &=
+ ~(SAS_TASK_STATE_PENDING | SAS_TASK_AT_INITIATOR);
+ task->task_state_flags |= SAS_TASK_STATE_DONE;
+ /* race condition*/
+ aborted = task->task_state_flags & SAS_TASK_STATE_ABORTED;
+ spin_unlock(&task->task_state_lock);
+
+ memset(tstat, 0, sizeof(*tstat));
+ tstat->resp = SAS_TASK_COMPLETE;
+
+ if (unlikely(aborted)) {
+ tstat->stat = SAS_ABORTED_TASK;
+ if (mvi_dev)
+ mvi_dev->runing_req--;
+ if (sas_protocol_ata(task->task_proto))
+ mvs_free_reg_set(mvi, mvi_dev);
+
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ return -1;
+ }
+
+ if (unlikely(!mvi_dev || !slot->port->port_attached || flags)) {
+ mv_dprintk("port has not device.\n");
+ tstat->stat = SAS_PHY_DOWN;
+ goto out;
+ }
+
+ /*
+ if (unlikely((rx_desc & RXQ_ERR) || (*(u64 *) slot->response))) {
+ mv_dprintk("Find device[%016llx] RXQ_ERR %X,
+ err info:%016llx\n",
+ SAS_ADDR(task->dev->sas_addr),
+ rx_desc, (u64)(*(u64 *) slot->response));
+ }
+ */
+
+ /* error info record present */
+ if (unlikely((rx_desc & RXQ_ERR) && (*(u64 *) slot->response))) {
+ tstat->stat = mvs_slot_err(mvi, task, slot_idx);
+ goto out;
+ }
+
+ switch (task->task_proto) {
+ case SAS_PROTOCOL_SSP:
+ /* hw says status == 0, datapres == 0 */
+ if (rx_desc & RXQ_GOOD) {
+ tstat->stat = SAM_GOOD;
+ tstat->resp = SAS_TASK_COMPLETE;
+ }
+ /* response frame present */
+ else if (rx_desc & RXQ_RSP) {
+ struct ssp_response_iu *iu = slot->response +
+ sizeof(struct mvs_err_info);
+ sas_ssp_task_response(mvi->dev, task, iu);
+ } else
+ tstat->stat = SAM_CHECK_COND;
+ break;
+
+ case SAS_PROTOCOL_SMP: {
+ struct scatterlist *sg_resp = &task->smp_task.smp_resp;
+ tstat->stat = SAM_GOOD;
+ to = kmap_atomic(sg_page(sg_resp), KM_IRQ0);
+ memcpy(to + sg_resp->offset,
+ slot->response + sizeof(struct mvs_err_info),
+ sg_dma_len(sg_resp));
+ kunmap_atomic(to, KM_IRQ0);
+ break;
+ }
+
+ case SAS_PROTOCOL_SATA:
+ case SAS_PROTOCOL_STP:
+ case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: {
+ tstat->stat = mvs_sata_done(mvi, task, slot_idx, 0);
+ break;
+ }
+
+ default:
+ tstat->stat = SAM_CHECK_COND;
+ break;
+ }
+
+out:
+ if (mvi_dev) {
+ mvi_dev->runing_req--;
+ if (sas_protocol_ata(task->task_proto))
+ mvs_free_reg_set(mvi, mvi_dev);
+ }
+ mvs_slot_task_free(mvi, task, slot, slot_idx);
+ sts = tstat->stat;
+
+ spin_unlock(&mvi->lock);
+ if (task->task_done)
+ task->task_done(task);
+ else
+ mv_dprintk("why has not task_done.\n");
+ spin_lock(&mvi->lock);
+
+ return sts;
+}
+
+void mvs_release_task(struct mvs_info *mvi,
+ int phy_no, struct domain_device *dev)
+{
+ int i = 0; u32 slot_idx;
+ struct mvs_phy *phy;
+ struct mvs_port *port;
+ struct mvs_slot_info *slot, *slot2;
+
+ phy = &mvi->phy[phy_no];
+ port = phy->port;
+ if (!port)
+ return;
+
+ list_for_each_entry_safe(slot, slot2, &port->list, entry) {
+ struct sas_task *task;
+ slot_idx = (u32) (slot - mvi->slot_info);
+ task = slot->task;
+
+ if (dev && task->dev != dev)
+ continue;
+
+ mv_printk("Release slot [%x] tag[%x], task [%p]:\n",
+ slot_idx, slot->slot_tag, task);
+
+ if (task->task_proto & SAS_PROTOCOL_SSP) {
+ mv_printk("attached with SSP task CDB[");
+ for (i = 0; i < 16; i++)
+ mv_printk(" %02x", task->ssp_task.cdb[i]);
+ mv_printk(" ]\n");
+ }
+
+ mvs_slot_complete(mvi, slot_idx, 1);
+ }
+}
+
+static void mvs_phy_disconnected(struct mvs_phy *phy)
+{
+ phy->phy_attached = 0;
+ phy->att_dev_info = 0;
+ phy->att_dev_sas_addr = 0;
+}
+
+static void mvs_work_queue(struct work_struct *work)
+{
+ struct delayed_work *dw = container_of(work, struct delayed_work, work);
+ struct mvs_wq *mwq = container_of(dw, struct mvs_wq, work_q);
+ struct mvs_info *mvi = mwq->mvi;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mvi->lock, flags);
+ if (mwq->handler & PHY_PLUG_EVENT) {
+ u32 phy_no = (unsigned long) mwq->data;
+ struct sas_ha_struct *sas_ha = mvi->sas;
+ struct mvs_phy *phy = &mvi->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ if (phy->phy_event & PHY_PLUG_OUT) {
+ u32 tmp;
+ struct sas_identify_frame *id;
+ id = (struct sas_identify_frame *)phy->frame_rcvd;
+ tmp = MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no);
+ phy->phy_event &= ~PHY_PLUG_OUT;
+ if (!(tmp & PHY_READY_MASK)) {
+ sas_phy_disconnected(sas_phy);
+ mvs_phy_disconnected(phy);
+ sas_ha->notify_phy_event(sas_phy,
+ PHYE_LOSS_OF_SIGNAL);
+ mv_dprintk("phy%d Removed Device\n", phy_no);
+ } else {
+ MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+ mvs_update_phyinfo(mvi, phy_no, 1);
+ mvs_bytes_dmaed(mvi, phy_no);
+ mvs_port_notify_formed(sas_phy, 0);
+ mv_dprintk("phy%d Attached Device\n", phy_no);
+ }
+ }
+ }
+ list_del(&mwq->entry);
+ spin_unlock_irqrestore(&mvi->lock, flags);
+ kfree(mwq);
+}
+
+static int mvs_handle_event(struct mvs_info *mvi, void *data, int handler)
+{
+ struct mvs_wq *mwq;
+ int ret = 0;
+
+ mwq = kmalloc(sizeof(struct mvs_wq), GFP_ATOMIC);
+ if (mwq) {
+ mwq->mvi = mvi;
+ mwq->data = data;
+ mwq->handler = handler;
+ MV_INIT_DELAYED_WORK(&mwq->work_q, mvs_work_queue, mwq);
+ list_add_tail(&mwq->entry, &mvi->wq_list);
+ schedule_delayed_work(&mwq->work_q, HZ * 2);
+ } else
+ ret = -ENOMEM;
+
+ return ret;
+}
+
+static void mvs_sig_time_out(unsigned long tphy)
+{
+ struct mvs_phy *phy = (struct mvs_phy *)tphy;
+ struct mvs_info *mvi = phy->mvi;
+ u8 phy_no;
+
+ for (phy_no = 0; phy_no < mvi->chip->n_phy; phy_no++) {
+ if (&mvi->phy[phy_no] == phy) {
+ mv_dprintk("Get signature time out, reset phy %d\n",
+ phy_no+mvi->id*mvi->chip->n_phy);
+ MVS_CHIP_DISP->phy_reset(mvi, phy_no, 1);
+ }
+ }
+}
+
+static void mvs_sig_remove_timer(struct mvs_phy *phy)
+{
+ if (phy->timer.function)
+ del_timer(&phy->timer);
+ phy->timer.function = NULL;
+}
+
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events)
+{
+ u32 tmp;
+ struct sas_ha_struct *sas_ha = mvi->sas;
+ struct mvs_phy *phy = &mvi->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+
+ phy->irq_status = MVS_CHIP_DISP->read_port_irq_stat(mvi, phy_no);
+ mv_dprintk("port %d ctrl sts=0x%X.\n", phy_no+mvi->id*mvi->chip->n_phy,
+ MVS_CHIP_DISP->read_phy_ctl(mvi, phy_no));
+ mv_dprintk("Port %d irq sts = 0x%X\n", phy_no+mvi->id*mvi->chip->n_phy,
+ phy->irq_status);
+
+ /*
+ * events is port event now ,
+ * we need check the interrupt status which belongs to per port.
+ */
+
+ if (phy->irq_status & PHYEV_DCDR_ERR)
+ mv_dprintk("port %d STP decoding error.\n",
+ phy_no+mvi->id*mvi->chip->n_phy);
+
+ if (phy->irq_status & PHYEV_POOF) {
+ if (!(phy->phy_event & PHY_PLUG_OUT)) {
+ int dev_sata = phy->phy_type & PORT_TYPE_SATA;
+ int ready;
+ mvs_release_task(mvi, phy_no, NULL);
+ phy->phy_event |= PHY_PLUG_OUT;
+ mvs_handle_event(mvi,
+ (void *)(unsigned long)phy_no,
+ PHY_PLUG_EVENT);
+ ready = mvs_is_phy_ready(mvi, phy_no);
+ if (!ready)
+ mv_dprintk("phy%d Unplug Notice\n",
+ phy_no +
+ mvi->id * mvi->chip->n_phy);
+ if (ready || dev_sata) {
+ if (MVS_CHIP_DISP->stp_reset)
+ MVS_CHIP_DISP->stp_reset(mvi,
+ phy_no);
+ else
+ MVS_CHIP_DISP->phy_reset(mvi,
+ phy_no, 0);
+ return;
+ }
+ }
+ }
+
+ if (phy->irq_status & PHYEV_COMWAKE) {
+ tmp = MVS_CHIP_DISP->read_port_irq_mask(mvi, phy_no);
+ MVS_CHIP_DISP->write_port_irq_mask(mvi, phy_no,
+ tmp | PHYEV_SIG_FIS);
+ if (phy->timer.function == NULL) {
+ phy->timer.data = (unsigned long)phy;
+ phy->timer.function = mvs_sig_time_out;
+ phy->timer.expires = jiffies + 10*HZ;
+ add_timer(&phy->timer);
+ }
+ }
+ if (phy->irq_status & (PHYEV_SIG_FIS | PHYEV_ID_DONE)) {
+ phy->phy_status = mvs_is_phy_ready(mvi, phy_no);
+ mvs_sig_remove_timer(phy);
+ mv_dprintk("notify plug in on phy[%d]\n", phy_no);
+ if (phy->phy_status) {
+ mdelay(10);
+ MVS_CHIP_DISP->detect_porttype(mvi, phy_no);
+ if (phy->phy_type & PORT_TYPE_SATA) {
+ tmp = MVS_CHIP_DISP->read_port_irq_mask(
+ mvi, phy_no);
+ tmp &= ~PHYEV_SIG_FIS;
+ MVS_CHIP_DISP->write_port_irq_mask(mvi,
+ phy_no, tmp);
+ }
+ mvs_update_phyinfo(mvi, phy_no, 0);
+ mvs_bytes_dmaed(mvi, phy_no);
+ /* whether driver is going to handle hot plug */
+ if (phy->phy_event & PHY_PLUG_OUT) {
+ mvs_port_notify_formed(sas_phy, 0);
+ phy->phy_event &= ~PHY_PLUG_OUT;
+ }
+ } else {
+ mv_dprintk("plugin interrupt but phy%d is gone\n",
+ phy_no + mvi->id*mvi->chip->n_phy);
+ }
+ } else if (phy->irq_status & PHYEV_BROAD_CH) {
+ mv_dprintk("port %d broadcast change.\n",
+ phy_no + mvi->id*mvi->chip->n_phy);
+ /* exception for Samsung disk drive*/
+ mdelay(1000);
+ sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+ }
+ MVS_CHIP_DISP->write_port_irq_stat(mvi, phy_no, phy->irq_status);
+}
+
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear)
+{
+ u32 rx_prod_idx, rx_desc;
+ bool attn = false;
+
+ /* the first dword in the RX ring is special: it contains
+ * a mirror of the hardware's RX producer index, so that
+ * we don't have to stall the CPU reading that register.
+ * The actual RX ring is offset by one dword, due to this.
+ */
+ rx_prod_idx = mvi->rx_cons;
+ mvi->rx_cons = le32_to_cpu(mvi->rx[0]);
+ if (mvi->rx_cons == 0xfff) /* h/w hasn't touched RX ring yet */
+ return 0;
+
+ /* The CMPL_Q may come late, read from register and try again
+ * note: if coalescing is enabled,
+ * it will need to read from register every time for sure
+ */
+ if (unlikely(mvi->rx_cons == rx_prod_idx))
+ mvi->rx_cons = MVS_CHIP_DISP->rx_update(mvi) & RX_RING_SZ_MASK;
+
+ if (mvi->rx_cons == rx_prod_idx)
+ return 0;
+
+ while (mvi->rx_cons != rx_prod_idx) {
+ /* increment our internal RX consumer pointer */
+ rx_prod_idx = (rx_prod_idx + 1) & (MVS_RX_RING_SZ - 1);
+ rx_desc = le32_to_cpu(mvi->rx[rx_prod_idx + 1]);
+
+ if (likely(rx_desc & RXQ_DONE))
+ mvs_slot_complete(mvi, rx_desc, 0);
+ if (rx_desc & RXQ_ATTN) {
+ attn = true;
+ } else if (rx_desc & RXQ_ERR) {
+ if (!(rx_desc & RXQ_DONE))
+ mvs_slot_complete(mvi, rx_desc, 0);
+ } else if (rx_desc & RXQ_SLOT_RESET) {
+ mvs_slot_free(mvi, rx_desc);
+ }
+ }
+
+ if (attn && self_clear)
+ MVS_CHIP_DISP->int_full(mvi);
+ return 0;
+}
+
diff --git a/drivers/scsi/mvsas/mv_sas.h b/drivers/scsi/mvsas/mv_sas.h
new file mode 100644
index 0000000..aa2270a
--- /dev/null
+++ b/drivers/scsi/mvsas/mv_sas.h
@@ -0,0 +1,406 @@
+/*
+ * Marvell 88SE64xx/88SE94xx main function head file
+ *
+ * Copyright 2007 Red Hat, Inc.
+ * Copyright 2008 Marvell. <kewei@marvell.com>
+ *
+ * This file is licensed under GPLv2.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+*/
+
+#ifndef _MV_SAS_H_
+#define _MV_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/vmalloc.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <linux/version.h>
+#include "mv_defs.h"
+
+#define DRV_NAME "mvsas"
+#define DRV_VERSION "0.8.2"
+#define _MV_DUMP 0
+#define MVS_ID_NOT_MAPPED 0x7f
+/* #define DISABLE_HOTPLUG_DMA_FIX */
+#define MAX_EXP_RUNNING_REQ 2
+#define WIDE_PORT_MAX_PHY 4
+#define MV_DISABLE_NCQ 0
+#define mv_printk(fmt, arg ...) \
+ printk(KERN_DEBUG"%s %d:" fmt, __FILE__, __LINE__, ## arg)
+#ifdef MV_DEBUG
+#define mv_dprintk(format, arg...) \
+ printk(KERN_DEBUG"%s %d:" format, __FILE__, __LINE__, ## arg)
+#else
+#define mv_dprintk(format, arg...)
+#endif
+#define MV_MAX_U32 0xffffffff
+
+extern struct mvs_tgt_initiator mvs_tgt;
+extern struct mvs_info *tgt_mvi;
+extern const struct mvs_dispatch mvs_64xx_dispatch;
+extern const struct mvs_dispatch mvs_94xx_dispatch;
+
+#define DEV_IS_EXPANDER(type) \
+ ((type == EDGE_DEV) || (type == FANOUT_DEV))
+
+#define bit(n) ((u32)1 << n)
+
+#define for_each_phy(__lseq_mask, __mc, __lseq) \
+ for ((__mc) = (__lseq_mask), (__lseq) = 0; \
+ (__mc) != 0 ; \
+ (++__lseq), (__mc) >>= 1)
+
+#define MV_INIT_DELAYED_WORK(w, f, d) INIT_DELAYED_WORK(w, f)
+#define UNASSOC_D2H_FIS(id) \
+ ((void *) mvi->rx_fis + 0x100 * id)
+#define SATA_RECEIVED_FIS_LIST(reg_set) \
+ ((void *) mvi->rx_fis + mvi->chip->fis_offs + 0x100 * reg_set)
+#define SATA_RECEIVED_SDB_FIS(reg_set) \
+ (SATA_RECEIVED_FIS_LIST(reg_set) + 0x58)
+#define SATA_RECEIVED_D2H_FIS(reg_set) \
+ (SATA_RECEIVED_FIS_LIST(reg_set) + 0x40)
+#define SATA_RECEIVED_PIO_FIS(reg_set) \
+ (SATA_RECEIVED_FIS_LIST(reg_set) + 0x20)
+#define SATA_RECEIVED_DMA_FIS(reg_set) \
+ (SATA_RECEIVED_FIS_LIST(reg_set) + 0x00)
+
+enum dev_status {
+ MVS_DEV_NORMAL = 0x0,
+ MVS_DEV_EH = 0x1,
+};
+
+
+struct mvs_info;
+
+struct mvs_dispatch {
+ char *name;
+ int (*chip_init)(struct mvs_info *mvi);
+ int (*spi_init)(struct mvs_info *mvi);
+ int (*chip_ioremap)(struct mvs_info *mvi);
+ void (*chip_iounmap)(struct mvs_info *mvi);
+ irqreturn_t (*isr)(struct mvs_info *mvi, int irq, u32 stat);
+ u32 (*isr_status)(struct mvs_info *mvi, int irq);
+ void (*interrupt_enable)(struct mvs_info *mvi);
+ void (*interrupt_disable)(struct mvs_info *mvi);
+
+ u32 (*read_phy_ctl)(struct mvs_info *mvi, u32 port);
+ void (*write_phy_ctl)(struct mvs_info *mvi, u32 port, u32 val);
+
+ u32 (*read_port_cfg_data)(struct mvs_info *mvi, u32 port);
+ void (*write_port_cfg_data)(struct mvs_info *mvi, u32 port, u32 val);
+ void (*write_port_cfg_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+ u32 (*read_port_vsr_data)(struct mvs_info *mvi, u32 port);
+ void (*write_port_vsr_data)(struct mvs_info *mvi, u32 port, u32 val);
+ void (*write_port_vsr_addr)(struct mvs_info *mvi, u32 port, u32 addr);
+
+ u32 (*read_port_irq_stat)(struct mvs_info *mvi, u32 port);
+ void (*write_port_irq_stat)(struct mvs_info *mvi, u32 port, u32 val);
+
+ u32 (*read_port_irq_mask)(struct mvs_info *mvi, u32 port);
+ void (*write_port_irq_mask)(struct mvs_info *mvi, u32 port, u32 val);
+
+ void (*get_sas_addr)(void *buf, u32 buflen);
+ void (*command_active)(struct mvs_info *mvi, u32 slot_idx);
+ void (*issue_stop)(struct mvs_info *mvi, enum mvs_port_type type,
+ u32 tfs);
+ void (*start_delivery)(struct mvs_info *mvi, u32 tx);
+ u32 (*rx_update)(struct mvs_info *mvi);
+ void (*int_full)(struct mvs_info *mvi);
+ u8 (*assign_reg_set)(struct mvs_info *mvi, u8 *tfs);
+ void (*free_reg_set)(struct mvs_info *mvi, u8 *tfs);
+ u32 (*prd_size)(void);
+ u32 (*prd_count)(void);
+ void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+ void (*detect_porttype)(struct mvs_info *mvi, int i);
+ int (*oob_done)(struct mvs_info *mvi, int i);
+ void (*fix_phy_info)(struct mvs_info *mvi, int i,
+ struct sas_identify_frame *id);
+ void (*phy_work_around)(struct mvs_info *mvi, int i);
+ void (*phy_set_link_rate)(struct mvs_info *mvi, u32 phy_id,
+ struct sas_phy_linkrates *rates);
+ u32 (*phy_max_link_rate)(void);
+ void (*phy_disable)(struct mvs_info *mvi, u32 phy_id);
+ void (*phy_enable)(struct mvs_info *mvi, u32 phy_id);
+ void (*phy_reset)(struct mvs_info *mvi, u32 phy_id, int hard);
+ void (*stp_reset)(struct mvs_info *mvi, u32 phy_id);
+ void (*clear_active_cmds)(struct mvs_info *mvi);
+ u32 (*spi_read_data)(struct mvs_info *mvi);
+ void (*spi_write_data)(struct mvs_info *mvi, u32 data);
+ int (*spi_buildcmd)(struct mvs_info *mvi,
+ u32 *dwCmd,
+ u8 cmd,
+ u8 read,
+ u8 length,
+ u32 addr
+ );
+ int (*spi_issuecmd)(struct mvs_info *mvi, u32 cmd);
+ int (*spi_waitdataready)(struct mvs_info *mvi, u32 timeout);
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ void (*dma_fix)(dma_addr_t buf_dma, int buf_len, int from, void *prd);
+#endif
+
+};
+
+struct mvs_chip_info {
+ u32 n_host;
+ u32 n_phy;
+ u32 fis_offs;
+ u32 fis_count;
+ u32 srs_sz;
+ u32 slot_width;
+ const struct mvs_dispatch *dispatch;
+};
+#define MVS_CHIP_SLOT_SZ (1U << mvi->chip->slot_width)
+#define MVS_RX_FISL_SZ \
+ (mvi->chip->fis_offs + (mvi->chip->fis_count * 0x100))
+#define MVS_CHIP_DISP (mvi->chip->dispatch)
+
+struct mvs_err_info {
+ __le32 flags;
+ __le32 flags2;
+};
+
+struct mvs_cmd_hdr {
+ __le32 flags; /* PRD tbl len; SAS, SATA ctl */
+ __le32 lens; /* cmd, max resp frame len */
+ __le32 tags; /* targ port xfer tag; tag */
+ __le32 data_len; /* data xfer len */
+ __le64 cmd_tbl; /* command table address */
+ __le64 open_frame; /* open addr frame address */
+ __le64 status_buf; /* status buffer address */
+ __le64 prd_tbl; /* PRD tbl address */
+ __le32 reserved[4];
+};
+
+struct mvs_port {
+ struct asd_sas_port sas_port;
+ u8 port_attached;
+ u8 wide_port_phymap;
+ struct list_head list;
+};
+
+struct mvs_phy {
+ struct mvs_info *mvi;
+ struct mvs_port *port;
+ struct asd_sas_phy sas_phy;
+ struct sas_identify identify;
+ struct scsi_device *sdev;
+ struct timer_list timer;
+ u64 dev_sas_addr;
+ u64 att_dev_sas_addr;
+ u32 att_dev_info;
+ u32 dev_info;
+ u32 phy_type;
+ u32 phy_status;
+ u32 irq_status;
+ u32 frame_rcvd_size;
+ u8 frame_rcvd[32];
+ u8 phy_attached;
+ u8 phy_mode;
+ u8 reserved[2];
+ u32 phy_event;
+ enum sas_linkrate minimum_linkrate;
+ enum sas_linkrate maximum_linkrate;
+};
+
+struct mvs_device {
+ struct list_head dev_entry;
+ enum sas_dev_type dev_type;
+ struct mvs_info *mvi_info;
+ struct domain_device *sas_device;
+ u32 attached_phy;
+ u32 device_id;
+ u32 runing_req;
+ u8 taskfileset;
+ u8 dev_status;
+ u16 reserved;
+};
+
+struct mvs_slot_info {
+ struct list_head entry;
+ union {
+ struct sas_task *task;
+ void *tdata;
+ };
+ u32 n_elem;
+ u32 tx;
+ u32 slot_tag;
+
+ /* DMA buffer for storing cmd tbl, open addr frame, status buffer,
+ * and PRD table
+ */
+ void *buf;
+ dma_addr_t buf_dma;
+#if _MV_DUMP
+ u32 cmd_size;
+#endif
+ void *response;
+ struct mvs_port *port;
+ struct mvs_device *device;
+ void *open_frame;
+};
+
+struct mvs_info {
+ unsigned long flags;
+
+ /* host-wide lock */
+ spinlock_t lock;
+
+ /* our device */
+ struct pci_dev *pdev;
+ struct device *dev;
+
+ /* enhanced mode registers */
+ void __iomem *regs;
+
+ /* peripheral or soc registers */
+ void __iomem *regs_ex;
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* SCSI/SAS glue */
+ struct sas_ha_struct *sas;
+ struct Scsi_Host *shost;
+
+ /* TX (delivery) DMA ring */
+ __le32 *tx;
+ dma_addr_t tx_dma;
+
+ /* cached next-producer idx */
+ u32 tx_prod;
+
+ /* RX (completion) DMA ring */
+ __le32 *rx;
+ dma_addr_t rx_dma;
+
+ /* RX consumer idx */
+ u32 rx_cons;
+
+ /* RX'd FIS area */
+ __le32 *rx_fis;
+ dma_addr_t rx_fis_dma;
+
+ /* DMA command header slots */
+ struct mvs_cmd_hdr *slot;
+ dma_addr_t slot_dma;
+
+ u32 chip_id;
+ const struct mvs_chip_info *chip;
+
+ int tags_num;
+ DECLARE_BITMAP(tags, MVS_SLOTS);
+ /* further per-slot information */
+ struct mvs_phy phy[MVS_MAX_PHYS];
+ struct mvs_port port[MVS_MAX_PHYS];
+ u32 irq;
+ u32 exp_req;
+ u32 id;
+ u64 sata_reg_set;
+ struct list_head *hba_list;
+ struct list_head soc_entry;
+ struct list_head wq_list;
+ unsigned long instance;
+ u16 flashid;
+ u32 flashsize;
+ u32 flashsectSize;
+
+ void *addon;
+ struct mvs_device devices[MVS_MAX_DEVICES];
+#ifndef DISABLE_HOTPLUG_DMA_FIX
+ void *bulk_buffer;
+ dma_addr_t bulk_buffer_dma;
+#define TRASH_BUCKET_SIZE 0x20000
+#endif
+ struct mvs_slot_info slot_info[0];
+};
+
+struct mvs_prv_info{
+ u8 n_host;
+ u8 n_phy;
+ u16 reserve;
+ struct mvs_info *mvi[2];
+};
+
+struct mvs_wq {
+ struct delayed_work work_q;
+ struct mvs_info *mvi;
+ void *data;
+ int handler;
+ struct list_head entry;
+};
+
+struct mvs_task_exec_info {
+ struct sas_task *task;
+ struct mvs_cmd_hdr *hdr;
+ struct mvs_port *port;
+ u32 tag;
+ int n_elem;
+};
+
+
+/******************** function prototype *********************/
+void mvs_get_sas_addr(void *buf, u32 buflen);
+void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
+void mvs_tag_free(struct mvs_info *mvi, u32 tag);
+void mvs_tag_set(struct mvs_info *mvi, unsigned int tag);
+int mvs_tag_alloc(struct mvs_info *mvi, u32 *tag_out);
+void mvs_tag_init(struct mvs_info *mvi);
+void mvs_iounmap(void __iomem *regs);
+int mvs_ioremap(struct mvs_info *mvi, int bar, int bar_ex);
+void mvs_phys_reset(struct mvs_info *mvi, u32 phy_mask, int hard);
+int mvs_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+ void *funcdata);
+void __devinit mvs_set_sas_addr(struct mvs_info *mvi, int port_id,
+ u32 off_lo, u32 off_hi, u64 sas_addr);
+int mvs_slave_alloc(struct scsi_device *scsi_dev);
+int mvs_slave_configure(struct scsi_device *sdev);
+void mvs_scan_start(struct Scsi_Host *shost);
+int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int mvs_queue_command(struct sas_task *task, const int num,
+ gfp_t gfp_flags);
+int mvs_abort_task(struct sas_task *task);
+int mvs_abort_task_set(struct domain_device *dev, u8 *lun);
+int mvs_clear_aca(struct domain_device *dev, u8 *lun);
+int mvs_clear_task_set(struct domain_device *dev, u8 * lun);
+void mvs_port_formed(struct asd_sas_phy *sas_phy);
+void mvs_port_deformed(struct asd_sas_phy *sas_phy);
+int mvs_dev_found(struct domain_device *dev);
+void mvs_dev_gone(struct domain_device *dev);
+int mvs_lu_reset(struct domain_device *dev, u8 *lun);
+int mvs_slot_complete(struct mvs_info *mvi, u32 rx_desc, u32 flags);
+int mvs_I_T_nexus_reset(struct domain_device *dev);
+int mvs_query_task(struct sas_task *task);
+void mvs_release_task(struct mvs_info *mvi, int phy_no,
+ struct domain_device *dev);
+void mvs_int_port(struct mvs_info *mvi, int phy_no, u32 events);
+void mvs_update_phyinfo(struct mvs_info *mvi, int i, int get_st);
+int mvs_int_rx(struct mvs_info *mvi, bool self_clear);
+void mvs_hexdump(u32 size, u8 *data, u32 baseaddr);
+#endif
+
diff --git a/drivers/scsi/osd/Kbuild b/drivers/scsi/osd/Kbuild
index 0e207aa..5fd73d77 100644
--- a/drivers/scsi/osd/Kbuild
+++ b/drivers/scsi/osd/Kbuild
@@ -11,31 +11,6 @@
# it under the terms of the GNU General Public License version 2
#
-ifneq ($(OSD_INC),)
-# we are built out-of-tree Kconfigure everything as on
-
-CONFIG_SCSI_OSD_INITIATOR=m
-ccflags-y += -DCONFIG_SCSI_OSD_INITIATOR -DCONFIG_SCSI_OSD_INITIATOR_MODULE
-
-CONFIG_SCSI_OSD_ULD=m
-ccflags-y += -DCONFIG_SCSI_OSD_ULD -DCONFIG_SCSI_OSD_ULD_MODULE
-
-# CONFIG_SCSI_OSD_DPRINT_SENSE =
-# 0 - no print of errors
-# 1 - print errors
-# 2 - errors + warrnings
-ccflags-y += -DCONFIG_SCSI_OSD_DPRINT_SENSE=1
-
-# Uncomment to turn debug on
-# ccflags-y += -DCONFIG_SCSI_OSD_DEBUG
-
-# if we are built out-of-tree and the hosting kernel has OSD headers
-# then "ccflags-y +=" will not pick the out-off-tree headers. Only by doing
-# this it will work. This might break in future kernels
-LINUXINCLUDE := -I$(OSD_INC) $(LINUXINCLUDE)
-
-endif
-
# libosd.ko - osd-initiator library
libosd-y := osd_initiator.o
obj-$(CONFIG_SCSI_OSD_INITIATOR) += libosd.o
diff --git a/drivers/scsi/osd/Makefile b/drivers/scsi/osd/Makefile
deleted file mode 100755
index d905344..0000000
--- a/drivers/scsi/osd/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# Makefile for the OSD modules (out of tree)
-#
-# Copyright (C) 2008 Panasas Inc. All rights reserved.
-#
-# Authors:
-# Boaz Harrosh <bharrosh@panasas.com>
-# Benny Halevy <bhalevy@panasas.com>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2
-#
-# This Makefile is used to call the kernel Makefile in case of an out-of-tree
-# build.
-# $KSRC should point to a Kernel source tree otherwise host's default is
-# used. (eg. /lib/modules/`uname -r`/build)
-
-# include path for out-of-tree Headers
-OSD_INC ?= `pwd`/../../../include
-
-# allow users to override these
-# e.g. to compile for a kernel that you aren't currently running
-KSRC ?= /lib/modules/$(shell uname -r)/build
-KBUILD_OUTPUT ?=
-ARCH ?=
-V ?= 0
-
-# this is the basic Kbuild out-of-tree invocation, with the M= option
-KBUILD_BASE = +$(MAKE) -C $(KSRC) M=`pwd` KBUILD_OUTPUT=$(KBUILD_OUTPUT) ARCH=$(ARCH) V=$(V)
-
-all: libosd
-
-libosd: ;
- $(KBUILD_BASE) OSD_INC=$(OSD_INC) modules
-
-clean:
- $(KBUILD_BASE) clean
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 5776b2a..7a117c1 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -118,39 +118,39 @@
_osd_ver_desc(or));
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_VENDOR_IDENTIFICATION [%s]\n",
+ OSD_INFO("VENDOR_IDENTIFICATION [%s]\n",
(char *)pFirst);
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_PRODUCT_IDENTIFICATION [%s]\n",
+ OSD_INFO("PRODUCT_IDENTIFICATION [%s]\n",
(char *)pFirst);
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_PRODUCT_MODEL [%s]\n",
+ OSD_INFO("PRODUCT_MODEL [%s]\n",
(char *)pFirst);
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_PRODUCT_REVISION_LEVEL [%u]\n",
+ OSD_INFO("PRODUCT_REVISION_LEVEL [%u]\n",
pFirst ? get_unaligned_be32(pFirst) : ~0U);
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER [%s]\n",
+ OSD_INFO("PRODUCT_SERIAL_NUMBER [%s]\n",
(char *)pFirst);
pFirst = get_attrs[a].val_ptr;
- OSD_INFO("OSD_ATTR_RI_OSD_NAME [%s]\n", (char *)pFirst);
+ OSD_INFO("OSD_NAME [%s]\n", (char *)pFirst);
a++;
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_TOTAL_CAPACITY [0x%llx]\n",
+ OSD_INFO("TOTAL_CAPACITY [0x%llx]\n",
pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_USED_CAPACITY [0x%llx]\n",
+ OSD_INFO("USED_CAPACITY [0x%llx]\n",
pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_NUMBER_OF_PARTITIONS [%llu]\n",
+ OSD_INFO("NUMBER_OF_PARTITIONS [%llu]\n",
pFirst ? _LLU(get_unaligned_be64(pFirst)) : ~0ULL);
if (a >= nelem)
@@ -158,7 +158,7 @@
/* FIXME: Where are the time utilities */
pFirst = get_attrs[a++].val_ptr;
- OSD_INFO("OSD_ATTR_RI_CLOCK [0x%02x%02x%02x%02x%02x%02x]\n",
+ OSD_INFO("CLOCK [0x%02x%02x%02x%02x%02x%02x]\n",
((char *)pFirst)[0], ((char *)pFirst)[1],
((char *)pFirst)[2], ((char *)pFirst)[3],
((char *)pFirst)[4], ((char *)pFirst)[5]);
@@ -169,7 +169,8 @@
hex_dump_to_buffer(get_attrs[a].val_ptr, len, 32, 1,
sid_dump, sizeof(sid_dump), true);
- OSD_INFO("OSD_ATTR_RI_OSD_SYSTEM_ID(%d) [%s]\n", len, sid_dump);
+ OSD_INFO("OSD_SYSTEM_ID(%d)\n"
+ " [%s]\n", len, sid_dump);
a++;
}
out:
@@ -669,7 +670,7 @@
__be16 action, const struct osd_obj_id *obj, osd_id initial_id,
struct osd_obj_id_list *list, unsigned nelem)
{
- struct request_queue *q = or->osd_dev->scsi_device->request_queue;
+ struct request_queue *q = osd_request_queue(or->osd_dev);
u64 len = nelem * sizeof(osd_id) + sizeof(*list);
struct bio *bio;
@@ -778,16 +779,32 @@
*/
void osd_req_write(struct osd_request *or,
- const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+ const struct osd_obj_id *obj, u64 offset,
+ struct bio *bio, u64 len)
{
- _osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, bio->bi_size);
+ _osd_req_encode_common(or, OSD_ACT_WRITE, obj, offset, len);
WARN_ON(or->out.bio || or->out.total_bytes);
- bio->bi_rw |= (1 << BIO_RW);
+ WARN_ON(0 == bio_rw_flagged(bio, BIO_RW));
or->out.bio = bio;
- or->out.total_bytes = bio->bi_size;
+ or->out.total_bytes = len;
}
EXPORT_SYMBOL(osd_req_write);
+int osd_req_write_kern(struct osd_request *or,
+ const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+ struct request_queue *req_q = osd_request_queue(or->osd_dev);
+ struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+ if (IS_ERR(bio))
+ return PTR_ERR(bio);
+
+ bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+ osd_req_write(or, obj, offset, bio, len);
+ return 0;
+}
+EXPORT_SYMBOL(osd_req_write_kern);
+
/*TODO: void osd_req_append(struct osd_request *,
const struct osd_obj_id *, struct bio *data_out); */
/*TODO: void osd_req_create_write(struct osd_request *,
@@ -813,16 +830,31 @@
EXPORT_SYMBOL(osd_req_flush_object);
void osd_req_read(struct osd_request *or,
- const struct osd_obj_id *obj, struct bio *bio, u64 offset)
+ const struct osd_obj_id *obj, u64 offset,
+ struct bio *bio, u64 len)
{
- _osd_req_encode_common(or, OSD_ACT_READ, obj, offset, bio->bi_size);
+ _osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len);
WARN_ON(or->in.bio || or->in.total_bytes);
- bio->bi_rw &= ~(1 << BIO_RW);
+ WARN_ON(1 == bio_rw_flagged(bio, BIO_RW));
or->in.bio = bio;
- or->in.total_bytes = bio->bi_size;
+ or->in.total_bytes = len;
}
EXPORT_SYMBOL(osd_req_read);
+int osd_req_read_kern(struct osd_request *or,
+ const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
+{
+ struct request_queue *req_q = osd_request_queue(or->osd_dev);
+ struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
+
+ if (IS_ERR(bio))
+ return PTR_ERR(bio);
+
+ osd_req_read(or, obj, offset, bio, len);
+ return 0;
+}
+EXPORT_SYMBOL(osd_req_read_kern);
+
void osd_req_get_attributes(struct osd_request *or,
const struct osd_obj_id *obj)
{
@@ -1213,7 +1245,7 @@
}
static int _osd_req_finalize_data_integrity(struct osd_request *or,
- bool has_in, bool has_out, const u8 *cap_key)
+ bool has_in, bool has_out, u64 out_data_bytes, const u8 *cap_key)
{
struct osd_security_parameters *sec_parms = _osd_req_sec_params(or);
int ret;
@@ -1228,8 +1260,7 @@
};
unsigned pad;
- or->out_data_integ.data_bytes = cpu_to_be64(
- or->out.bio ? or->out.bio->bi_size : 0);
+ or->out_data_integ.data_bytes = cpu_to_be64(out_data_bytes);
or->out_data_integ.set_attributes_bytes = cpu_to_be64(
or->set_attr.total_bytes);
or->out_data_integ.get_attributes_bytes = cpu_to_be64(
@@ -1306,6 +1337,8 @@
or->request = req;
req->cmd_type = REQ_TYPE_BLOCK_PC;
+ req->cmd_flags |= REQ_QUIET;
+
req->timeout = or->timeout;
req->retries = or->retries;
req->sense = or->sense;
@@ -1339,6 +1372,7 @@
{
struct osd_cdb_head *cdbh = osd_cdb_head(&or->cdb);
bool has_in, has_out;
+ u64 out_data_bytes = or->out.total_bytes;
int ret;
if (options & OSD_REQ_FUA)
@@ -1388,7 +1422,8 @@
}
}
- ret = _osd_req_finalize_data_integrity(or, has_in, has_out, cap_key);
+ ret = _osd_req_finalize_data_integrity(or, has_in, has_out,
+ out_data_bytes, cap_key);
if (ret)
return ret;
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index 22b59e1..0bdef33 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -49,6 +49,7 @@
#include <linux/device.h>
#include <linux/idr.h>
#include <linux/major.h>
+#include <linux/file.h>
#include <scsi/scsi.h>
#include <scsi/scsi_driver.h>
@@ -175,10 +176,9 @@
struct osd_dev *osduld_path_lookup(const char *name)
{
- struct path path;
- struct inode *inode;
- struct cdev *cdev;
- struct osd_uld_device *uninitialized_var(oud);
+ struct osd_uld_device *oud;
+ struct osd_dev *od;
+ struct file *file;
int error;
if (!name || !*name) {
@@ -186,52 +186,46 @@
return ERR_PTR(-EINVAL);
}
- error = kern_path(name, LOOKUP_FOLLOW, &path);
- if (error) {
- OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
- return ERR_PTR(error);
+ od = kzalloc(sizeof(*od), GFP_KERNEL);
+ if (!od)
+ return ERR_PTR(-ENOMEM);
+
+ file = filp_open(name, O_RDWR, 0);
+ if (IS_ERR(file)) {
+ error = PTR_ERR(file);
+ goto free_od;
}
- inode = path.dentry->d_inode;
- error = -EINVAL; /* Not the right device e.g osd_uld_device */
- if (!S_ISCHR(inode->i_mode)) {
- OSD_DEBUG("!S_ISCHR()\n");
- goto out;
+ if (file->f_op != &osd_fops){
+ error = -EINVAL;
+ goto close_file;
}
- cdev = inode->i_cdev;
- if (!cdev) {
- OSD_ERR("Before mounting an OSD Based filesystem\n");
- OSD_ERR(" user-mode must open+close the %s device\n", name);
- OSD_ERR(" Example: bash: echo < %s\n", name);
- goto out;
- }
+ oud = file->private_data;
- /* The Magic wand. Is it our char-dev */
- /* TODO: Support sg devices */
- if (cdev->owner != THIS_MODULE) {
- OSD_ERR("Error mounting %s - is not an OSD device\n", name);
- goto out;
- }
+ *od = oud->od;
+ od->file = file;
- oud = container_of(cdev, struct osd_uld_device, cdev);
+ return od;
- __uld_get(oud);
- error = 0;
-
-out:
- path_put(&path);
- return error ? ERR_PTR(error) : &oud->od;
+close_file:
+ fput(file);
+free_od:
+ kfree(od);
+ return ERR_PTR(error);
}
EXPORT_SYMBOL(osduld_path_lookup);
void osduld_put_device(struct osd_dev *od)
{
- if (od) {
- struct osd_uld_device *oud = container_of(od,
- struct osd_uld_device, od);
- __uld_put(oud);
+ if (od && !IS_ERR(od)) {
+ struct osd_uld_device *oud = od->file->private_data;
+
+ BUG_ON(od->scsi_device != oud->od.scsi_device);
+
+ fput(od->file);
+ kfree(od);
}
}
EXPORT_SYMBOL(osduld_put_device);
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5defe5e..8371d91 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -17,9 +17,12 @@
* General Public License for more details.
*
******************************************************************************/
-#define QLA1280_VERSION "3.26"
+#define QLA1280_VERSION "3.27"
/*****************************************************************************
Revision History:
+ Rev 3.27, February 10, 2009, Michael Reed
+ - General code cleanup.
+ - Improve error recovery.
Rev 3.26, January 16, 2006 Jes Sorensen
- Ditch all < 2.6 support
Rev 3.25.1, February 10, 2005 Christoph Hellwig
@@ -435,7 +438,6 @@
uint8_t, uint16_t *);
static int qla1280_bus_reset(struct scsi_qla_host *, int);
static int qla1280_device_reset(struct scsi_qla_host *, int, int);
-static int qla1280_abort_device(struct scsi_qla_host *, int, int, int);
static int qla1280_abort_command(struct scsi_qla_host *, struct srb *, int);
static int qla1280_abort_isp(struct scsi_qla_host *);
#ifdef QLA_64BIT_PTR
@@ -698,7 +700,7 @@
}
/**************************************************************************
- * qla1200_queuecommand
+ * qla1280_queuecommand
* Queue a command to the controller.
*
* Note:
@@ -713,12 +715,14 @@
{
struct Scsi_Host *host = cmd->device->host;
struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
- struct srb *sp = (struct srb *)&cmd->SCp;
+ struct srb *sp = (struct srb *)CMD_SP(cmd);
int status;
cmd->scsi_done = fn;
sp->cmd = cmd;
sp->flags = 0;
+ sp->wait = NULL;
+ CMD_HANDLE(cmd) = (unsigned char *)NULL;
qla1280_print_scsi_cmd(5, cmd);
@@ -738,21 +742,11 @@
enum action {
ABORT_COMMAND,
- ABORT_DEVICE,
DEVICE_RESET,
BUS_RESET,
ADAPTER_RESET,
- FAIL
};
-/* timer action for error action processor */
-static void qla1280_error_wait_timeout(unsigned long __data)
-{
- struct scsi_cmnd *cmd = (struct scsi_cmnd *)__data;
- struct srb *sp = (struct srb *)CMD_SP(cmd);
-
- complete(sp->wait);
-}
static void qla1280_mailbox_timeout(unsigned long __data)
{
@@ -767,8 +761,67 @@
complete(ha->mailbox_wait);
}
+static int
+_qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp,
+ struct completion *wait)
+{
+ int status = FAILED;
+ struct scsi_cmnd *cmd = sp->cmd;
+
+ spin_unlock_irq(ha->host->host_lock);
+ wait_for_completion_timeout(wait, 4*HZ);
+ spin_lock_irq(ha->host->host_lock);
+ sp->wait = NULL;
+ if(CMD_HANDLE(cmd) == COMPLETED_HANDLE) {
+ status = SUCCESS;
+ (*cmd->scsi_done)(cmd);
+ }
+ return status;
+}
+
+static int
+qla1280_wait_for_single_command(struct scsi_qla_host *ha, struct srb *sp)
+{
+ DECLARE_COMPLETION_ONSTACK(wait);
+
+ sp->wait = &wait;
+ return _qla1280_wait_for_single_command(ha, sp, &wait);
+}
+
+static int
+qla1280_wait_for_pending_commands(struct scsi_qla_host *ha, int bus, int target)
+{
+ int cnt;
+ int status;
+ struct srb *sp;
+ struct scsi_cmnd *cmd;
+
+ status = SUCCESS;
+
+ /*
+ * Wait for all commands with the designated bus/target
+ * to be completed by the firmware
+ */
+ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ sp = ha->outstanding_cmds[cnt];
+ if (sp) {
+ cmd = sp->cmd;
+
+ if (bus >= 0 && SCSI_BUS_32(cmd) != bus)
+ continue;
+ if (target >= 0 && SCSI_TCN_32(cmd) != target)
+ continue;
+
+ status = qla1280_wait_for_single_command(ha, sp);
+ if (status == FAILED)
+ break;
+ }
+ }
+ return status;
+}
+
/**************************************************************************
- * qla1200_error_action
+ * qla1280_error_action
* The function will attempt to perform a specified error action and
* wait for the results (or time out).
*
@@ -780,11 +833,6 @@
* Returns:
* SUCCESS or FAILED
*
- * Note:
- * Resetting the bus always succeeds - is has to, otherwise the
- * kernel will panic! Try a surgical technique - sending a BUS
- * DEVICE RESET message - on the offending target before pulling
- * the SCSI bus reset line.
**************************************************************************/
static int
qla1280_error_action(struct scsi_cmnd *cmd, enum action action)
@@ -792,13 +840,19 @@
struct scsi_qla_host *ha;
int bus, target, lun;
struct srb *sp;
- uint16_t data;
- unsigned char *handle;
- int result, i;
+ int i, found;
+ int result=FAILED;
+ int wait_for_bus=-1;
+ int wait_for_target = -1;
DECLARE_COMPLETION_ONSTACK(wait);
- struct timer_list timer;
+
+ ENTER("qla1280_error_action");
ha = (struct scsi_qla_host *)(CMD_HOST(cmd)->hostdata);
+ sp = (struct srb *)CMD_SP(cmd);
+ bus = SCSI_BUS_32(cmd);
+ target = SCSI_TCN_32(cmd);
+ lun = SCSI_LUN_32(cmd);
dprintk(4, "error_action %i, istatus 0x%04x\n", action,
RD_REG_WORD(&ha->iobase->istatus));
@@ -807,99 +861,47 @@
RD_REG_WORD(&ha->iobase->host_cmd),
RD_REG_WORD(&ha->iobase->ictrl), jiffies);
- ENTER("qla1280_error_action");
if (qla1280_verbose)
printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
"Handle=0x%p, action=0x%x\n",
ha->host_no, cmd, CMD_HANDLE(cmd), action);
- if (cmd == NULL) {
- printk(KERN_WARNING "(scsi?:?:?:?) Reset called with NULL "
- "si_Cmnd pointer, failing.\n");
- LEAVE("qla1280_error_action");
- return FAILED;
- }
-
- ha = (struct scsi_qla_host *)cmd->device->host->hostdata;
- sp = (struct srb *)CMD_SP(cmd);
- handle = CMD_HANDLE(cmd);
-
- /* Check for pending interrupts. */
- data = qla1280_debounce_register(&ha->iobase->istatus);
/*
- * The io_request_lock is held when the reset handler is called, hence
- * the interrupt handler cannot be running in parallel as it also
- * grabs the lock. /Jes
+ * Check to see if we have the command in the outstanding_cmds[]
+ * array. If not then it must have completed before this error
+ * action was initiated. If the error_action isn't ABORT_COMMAND
+ * then the driver must proceed with the requested action.
*/
- if (data & RISC_INT)
- qla1280_isr(ha, &ha->done_q);
-
- /*
- * Determine the suggested action that the mid-level driver wants
- * us to perform.
- */
- if (handle == (unsigned char *)INVALID_HANDLE || handle == NULL) {
- if(action == ABORT_COMMAND) {
- /* we never got this command */
- printk(KERN_INFO "qla1280: Aborting a NULL handle\n");
- return SUCCESS; /* no action - we don't have command */
- }
- } else {
- sp->wait = &wait;
- }
-
- bus = SCSI_BUS_32(cmd);
- target = SCSI_TCN_32(cmd);
- lun = SCSI_LUN_32(cmd);
-
- /* Overloading result. Here it means the success or fail of the
- * *issue* of the action. When we return from the routine, it must
- * mean the actual success or fail of the action */
- result = FAILED;
- switch (action) {
- case FAIL:
- break;
-
- case ABORT_COMMAND:
- if ((sp->flags & SRB_ABORT_PENDING)) {
- printk(KERN_WARNING
- "scsi(): Command has a pending abort "
- "message - ABORT_PENDING.\n");
- /* This should technically be impossible since we
- * now wait for abort completion */
+ found = -1;
+ for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
+ if (sp == ha->outstanding_cmds[i]) {
+ found = i;
+ sp->wait = &wait; /* we'll wait for it to complete */
break;
}
+ }
- for (i = 0; i < MAX_OUTSTANDING_COMMANDS; i++) {
- if (sp == ha->outstanding_cmds[i]) {
- dprintk(1, "qla1280: RISC aborting command\n");
- if (qla1280_abort_command(ha, sp, i) == 0)
- result = SUCCESS;
- else {
- /*
- * Since we don't know what might
- * have happend to the command, it
- * is unsafe to remove it from the
- * device's queue at this point.
- * Wait and let the escalation
- * process take care of it.
- */
- printk(KERN_WARNING
- "scsi(%li:%i:%i:%i): Unable"
- " to abort command!\n",
- ha->host_no, bus, target, lun);
- }
- }
- }
- break;
-
- case ABORT_DEVICE:
- if (qla1280_verbose)
+ if (found < 0) { /* driver doesn't have command */
+ result = SUCCESS;
+ if (qla1280_verbose) {
printk(KERN_INFO
- "scsi(%ld:%d:%d:%d): Queueing abort device "
- "command.\n", ha->host_no, bus, target, lun);
- if (qla1280_abort_device(ha, bus, target, lun) == 0)
- result = SUCCESS;
+ "scsi(%ld:%d:%d:%d): specified command has "
+ "already completed.\n", ha->host_no, bus,
+ target, lun);
+ }
+ }
+
+ switch (action) {
+
+ case ABORT_COMMAND:
+ dprintk(1, "qla1280: RISC aborting command\n");
+ /*
+ * The abort might fail due to race when the host_lock
+ * is released to issue the abort. As such, we
+ * don't bother to check the return status.
+ */
+ if (found >= 0)
+ qla1280_abort_command(ha, sp, found);
break;
case DEVICE_RESET:
@@ -907,16 +909,21 @@
printk(KERN_INFO
"scsi(%ld:%d:%d:%d): Queueing device reset "
"command.\n", ha->host_no, bus, target, lun);
- if (qla1280_device_reset(ha, bus, target) == 0)
- result = SUCCESS;
+ if (qla1280_device_reset(ha, bus, target) == 0) {
+ /* issued device reset, set wait conditions */
+ wait_for_bus = bus;
+ wait_for_target = target;
+ }
break;
case BUS_RESET:
if (qla1280_verbose)
printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
"reset.\n", ha->host_no, bus);
- if (qla1280_bus_reset(ha, bus) == 0)
- result = SUCCESS;
+ if (qla1280_bus_reset(ha, bus) == 0) {
+ /* issued bus reset, set wait conditions */
+ wait_for_bus = bus;
+ }
break;
case ADAPTER_RESET:
@@ -929,55 +936,48 @@
"continue automatically\n", ha->host_no);
}
ha->flags.reset_active = 1;
- /*
- * We restarted all of the commands automatically, so the
- * mid-level code can expect completions momentitarily.
- */
- if (qla1280_abort_isp(ha) == 0)
- result = SUCCESS;
+
+ if (qla1280_abort_isp(ha) != 0) { /* it's dead */
+ result = FAILED;
+ }
ha->flags.reset_active = 0;
}
- if (!list_empty(&ha->done_q))
- qla1280_done(ha);
+ /*
+ * At this point, the host_lock has been released and retaken
+ * by the issuance of the mailbox command.
+ * Wait for the command passed in by the mid-layer if it
+ * was found by the driver. It might have been returned
+ * between eh recovery steps, hence the check of the "found"
+ * variable.
+ */
- /* If we didn't manage to issue the action, or we have no
- * command to wait for, exit here */
- if (result == FAILED || handle == NULL ||
- handle == (unsigned char *)INVALID_HANDLE) {
- /*
- * Clear completion queue to avoid qla1280_done() trying
- * to complete the command at a later stage after we
- * have exited the current context
- */
- sp->wait = NULL;
- goto leave;
+ if (found >= 0)
+ result = _qla1280_wait_for_single_command(ha, sp, &wait);
+
+ if (action == ABORT_COMMAND && result != SUCCESS) {
+ printk(KERN_WARNING
+ "scsi(%li:%i:%i:%i): "
+ "Unable to abort command!\n",
+ ha->host_no, bus, target, lun);
}
- /* set up a timer just in case we're really jammed */
- init_timer(&timer);
- timer.expires = jiffies + 4*HZ;
- timer.data = (unsigned long)cmd;
- timer.function = qla1280_error_wait_timeout;
- add_timer(&timer);
-
- /* wait for the action to complete (or the timer to expire) */
- spin_unlock_irq(ha->host->host_lock);
- wait_for_completion(&wait);
- del_timer_sync(&timer);
- spin_lock_irq(ha->host->host_lock);
- sp->wait = NULL;
-
- /* the only action we might get a fail for is abort */
- if (action == ABORT_COMMAND) {
- if(sp->flags & SRB_ABORTED)
- result = SUCCESS;
- else
- result = FAILED;
+ /*
+ * If the command passed in by the mid-layer has been
+ * returned by the board, then wait for any additional
+ * commands which are supposed to complete based upon
+ * the error action.
+ *
+ * All commands are unconditionally returned during a
+ * call to qla1280_abort_isp(), ADAPTER_RESET. No need
+ * to wait for them.
+ */
+ if (result == SUCCESS && wait_for_bus >= 0) {
+ result = qla1280_wait_for_pending_commands(ha,
+ wait_for_bus, wait_for_target);
}
- leave:
dprintk(1, "RESET returning %d\n", result);
LEAVE("qla1280_error_action");
@@ -1280,13 +1280,12 @@
switch ((CMD_RESULT(cmd) >> 16)) {
case DID_RESET:
/* Issue marker command. */
- qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
+ if (!ha->flags.abort_isp_active)
+ qla1280_marker(ha, bus, target, 0, MK_SYNC_ID);
break;
case DID_ABORT:
sp->flags &= ~SRB_ABORT_PENDING;
sp->flags |= SRB_ABORTED;
- if (sp->flags & SRB_TIMEOUT)
- CMD_RESULT(sp->cmd) = DID_TIME_OUT << 16;
break;
default:
break;
@@ -1296,12 +1295,11 @@
scsi_dma_unmap(cmd);
/* Call the mid-level driver interrupt handler */
- CMD_HANDLE(sp->cmd) = (unsigned char *)INVALID_HANDLE;
ha->actthreads--;
- (*(cmd)->scsi_done)(cmd);
-
- if(sp->wait != NULL)
+ if (sp->wait == NULL)
+ (*(cmd)->scsi_done)(cmd);
+ else
complete(sp->wait);
}
LEAVE("qla1280_done");
@@ -2417,9 +2415,6 @@
qla1280_mailbox_command(struct scsi_qla_host *ha, uint8_t mr, uint16_t *mb)
{
struct device_reg __iomem *reg = ha->iobase;
-#if 0
- LIST_HEAD(done_q);
-#endif
int status = 0;
int cnt;
uint16_t *optr, *iptr;
@@ -2493,19 +2488,9 @@
mr = MAILBOX_REGISTER_COUNT;
memcpy(optr, iptr, MAILBOX_REGISTER_COUNT * sizeof(uint16_t));
-#if 0
- /* Go check for any response interrupts pending. */
- qla1280_isr(ha, &done_q);
-#endif
-
if (ha->flags.reset_marker)
qla1280_rst_aen(ha);
-#if 0
- if (!list_empty(&done_q))
- qla1280_done(ha, &done_q);
-#endif
-
if (status)
dprintk(2, "qla1280_mailbox_command: **** FAILED, mailbox0 = "
"0x%x ****\n", mb[0]);
@@ -2641,41 +2626,6 @@
}
/*
- * qla1280_abort_device
- * Issue an abort message to the device
- *
- * Input:
- * ha = adapter block pointer.
- * bus = SCSI BUS.
- * target = SCSI ID.
- * lun = SCSI LUN.
- *
- * Returns:
- * 0 = success
- */
-static int
-qla1280_abort_device(struct scsi_qla_host *ha, int bus, int target, int lun)
-{
- uint16_t mb[MAILBOX_REGISTER_COUNT];
- int status;
-
- ENTER("qla1280_abort_device");
-
- mb[0] = MBC_ABORT_DEVICE;
- mb[1] = (bus ? target | BIT_7 : target) << 8 | lun;
- status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);
-
- /* Issue marker command. */
- qla1280_marker(ha, bus, target, lun, MK_SYNC_ID_LUN);
-
- if (status)
- dprintk(2, "qla1280_abort_device: **** FAILED ****\n");
-
- LEAVE("qla1280_abort_device");
- return status;
-}
-
-/*
* qla1280_abort_command
* Abort command aborts a specified IOCB.
*
@@ -2833,7 +2783,7 @@
/* If room for request in request ring. */
if ((req_cnt + 2) >= ha->req_q_cnt) {
- status = 1;
+ status = SCSI_MLQUEUE_HOST_BUSY;
dprintk(2, "qla1280_start_scsi: in-ptr=0x%x req_q_cnt="
"0x%xreq_cnt=0x%x", ha->req_ring_index, ha->req_q_cnt,
req_cnt);
@@ -2845,7 +2795,7 @@
ha->outstanding_cmds[cnt] != NULL; cnt++);
if (cnt >= MAX_OUTSTANDING_COMMANDS) {
- status = 1;
+ status = SCSI_MLQUEUE_HOST_BUSY;
dprintk(2, "qla1280_start_scsi: NO ROOM IN "
"OUTSTANDING ARRAY, req_q_cnt=0x%x", ha->req_q_cnt);
goto out;
@@ -3108,7 +3058,7 @@
ha->req_q_cnt, seg_cnt);
/* If room for request in request ring. */
if ((req_cnt + 2) >= ha->req_q_cnt) {
- status = 1;
+ status = SCSI_MLQUEUE_HOST_BUSY;
dprintk(2, "qla1280_32bit_start_scsi: in-ptr=0x%x, "
"req_q_cnt=0x%x, req_cnt=0x%x", ha->req_ring_index,
ha->req_q_cnt, req_cnt);
@@ -3120,7 +3070,7 @@
(ha->outstanding_cmds[cnt] != 0); cnt++) ;
if (cnt >= MAX_OUTSTANDING_COMMANDS) {
- status = 1;
+ status = SCSI_MLQUEUE_HOST_BUSY;
dprintk(2, "qla1280_32bit_start_scsi: NO ROOM IN OUTSTANDING "
"ARRAY, req_q_cnt=0x%x\n", ha->req_q_cnt);
goto out;
@@ -3487,6 +3437,7 @@
/* Save ISP completion status */
CMD_RESULT(sp->cmd) = 0;
+ CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
/* Place block on done queue */
list_add_tail(&sp->list, done_q);
@@ -3495,7 +3446,7 @@
* If we get here we have a real problem!
*/
printk(KERN_WARNING
- "qla1280: ISP invalid handle");
+ "qla1280: ISP invalid handle\n");
}
}
break;
@@ -3753,6 +3704,8 @@
}
}
+ CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
/* Place command on done queue. */
list_add_tail(&sp->list, done_q);
out:
@@ -3808,6 +3761,8 @@
CMD_RESULT(sp->cmd) = DID_ERROR << 16;
}
+ CMD_HANDLE(sp->cmd) = COMPLETED_HANDLE;
+
/* Place command on done queue. */
list_add_tail(&sp->list, done_q);
}
@@ -3858,19 +3813,16 @@
struct scsi_cmnd *cmd;
sp = ha->outstanding_cmds[cnt];
if (sp) {
-
cmd = sp->cmd;
CMD_RESULT(cmd) = DID_RESET << 16;
-
- sp->cmd = NULL;
+ CMD_HANDLE(cmd) = COMPLETED_HANDLE;
ha->outstanding_cmds[cnt] = NULL;
-
- (*cmd->scsi_done)(cmd);
-
- sp->flags = 0;
+ list_add_tail(&sp->list, &ha->done_q);
}
}
+ qla1280_done(ha);
+
status = qla1280_load_firmware(ha);
if (status)
goto out;
@@ -3955,13 +3907,6 @@
if (scsi_control == SCSI_PHASE_INVALID) {
ha->bus_settings[bus].scsi_bus_dead = 1;
-#if 0
- CMD_RESULT(cp) = DID_NO_CONNECT << 16;
- CMD_HANDLE(cp) = INVALID_HANDLE;
- /* ha->actthreads--; */
-
- (*(cp)->scsi_done)(cp);
-#endif
return 1; /* bus is dead */
} else {
ha->bus_settings[bus].scsi_bus_dead = 0;
diff --git a/drivers/scsi/qla1280.h b/drivers/scsi/qla1280.h
index d7c44b8..834884b 100644
--- a/drivers/scsi/qla1280.h
+++ b/drivers/scsi/qla1280.h
@@ -88,7 +88,8 @@
/* Maximum outstanding commands in ISP queues */
#define MAX_OUTSTANDING_COMMANDS 512
-#define INVALID_HANDLE (MAX_OUTSTANDING_COMMANDS + 2)
+#define COMPLETED_HANDLE ((unsigned char *) \
+ (MAX_OUTSTANDING_COMMANDS + 2))
/* ISP request and response entry counts (37-65535) */
#define REQUEST_ENTRY_CNT 255 /* Number of request entries. */
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index b09993a..0f87962 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -97,7 +97,7 @@
return 0;
if (IS_NOCACHE_VPD_TYPE(ha))
- ha->isp_ops->read_optrom(vha, ha->vpd, ha->flt_region_nvram << 2,
+ ha->isp_ops->read_optrom(vha, ha->nvram, ha->flt_region_nvram << 2,
ha->nvram_size);
return memory_read_from_buffer(buf, count, &off, ha->nvram,
ha->nvram_size);
@@ -692,6 +692,109 @@
.read = qla2x00_sysfs_read_edc_status,
};
+static ssize_t
+qla2x00_sysfs_read_xgmac_stats(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+ struct device, kobj)));
+ struct qla_hw_data *ha = vha->hw;
+ int rval;
+ uint16_t actual_size;
+
+ if (!capable(CAP_SYS_ADMIN) || off != 0 || count > XGMAC_DATA_SIZE)
+ return 0;
+
+ if (ha->xgmac_data)
+ goto do_read;
+
+ ha->xgmac_data = dma_alloc_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+ &ha->xgmac_data_dma, GFP_KERNEL);
+ if (!ha->xgmac_data) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory for XGMAC read-data.\n");
+ return 0;
+ }
+
+do_read:
+ actual_size = 0;
+ memset(ha->xgmac_data, 0, XGMAC_DATA_SIZE);
+
+ rval = qla2x00_get_xgmac_stats(vha, ha->xgmac_data_dma,
+ XGMAC_DATA_SIZE, &actual_size);
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to read XGMAC data (%x).\n", rval);
+ count = 0;
+ }
+
+ count = actual_size > count ? count: actual_size;
+ memcpy(buf, ha->xgmac_data, count);
+
+ return count;
+}
+
+static struct bin_attribute sysfs_xgmac_stats_attr = {
+ .attr = {
+ .name = "xgmac_stats",
+ .mode = S_IRUSR,
+ },
+ .size = 0,
+ .read = qla2x00_sysfs_read_xgmac_stats,
+};
+
+static ssize_t
+qla2x00_sysfs_read_dcbx_tlv(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct scsi_qla_host *vha = shost_priv(dev_to_shost(container_of(kobj,
+ struct device, kobj)));
+ struct qla_hw_data *ha = vha->hw;
+ int rval;
+ uint16_t actual_size;
+
+ if (!capable(CAP_SYS_ADMIN) || off != 0 || count > DCBX_TLV_DATA_SIZE)
+ return 0;
+
+ if (ha->dcbx_tlv)
+ goto do_read;
+
+ ha->dcbx_tlv = dma_alloc_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+ &ha->dcbx_tlv_dma, GFP_KERNEL);
+ if (!ha->dcbx_tlv) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory for DCBX TLV read-data.\n");
+ return 0;
+ }
+
+do_read:
+ actual_size = 0;
+ memset(ha->dcbx_tlv, 0, DCBX_TLV_DATA_SIZE);
+
+ rval = qla2x00_get_dcbx_params(vha, ha->dcbx_tlv_dma,
+ DCBX_TLV_DATA_SIZE);
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to read DCBX TLV data (%x).\n", rval);
+ count = 0;
+ }
+
+ memcpy(buf, ha->dcbx_tlv, count);
+
+ return count;
+}
+
+static struct bin_attribute sysfs_dcbx_tlv_attr = {
+ .attr = {
+ .name = "dcbx_tlv",
+ .mode = S_IRUSR,
+ },
+ .size = 0,
+ .read = qla2x00_sysfs_read_dcbx_tlv,
+};
+
static struct sysfs_entry {
char *name;
struct bin_attribute *attr;
@@ -706,6 +809,8 @@
{ "reset", &sysfs_reset_attr, },
{ "edc", &sysfs_edc_attr, 2 },
{ "edc_status", &sysfs_edc_status_attr, 2 },
+ { "xgmac_stats", &sysfs_xgmac_stats_attr, 3 },
+ { "dcbx_tlv", &sysfs_dcbx_tlv_attr, 3 },
{ NULL },
};
@@ -721,6 +826,8 @@
continue;
if (iter->is4GBp_only == 2 && !IS_QLA25XX(vha->hw))
continue;
+ if (iter->is4GBp_only == 3 && !IS_QLA81XX(vha->hw))
+ continue;
ret = sysfs_create_bin_file(&host->shost_gendev.kobj,
iter->attr);
@@ -743,6 +850,8 @@
continue;
if (iter->is4GBp_only == 2 && !IS_QLA25XX(ha))
continue;
+ if (iter->is4GBp_only == 3 && !IS_QLA81XX(ha))
+ continue;
sysfs_remove_bin_file(&host->shost_gendev.kobj,
iter->attr);
@@ -1088,6 +1197,58 @@
return snprintf(buf, PAGE_SIZE, "0x%x\n", ha->fdt_block_size);
}
+static ssize_t
+qla2x00_vlan_id_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+ if (!IS_QLA81XX(vha->hw))
+ return snprintf(buf, PAGE_SIZE, "\n");
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", vha->fcoe_vlan_id);
+}
+
+static ssize_t
+qla2x00_vn_port_mac_address_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+ if (!IS_QLA81XX(vha->hw))
+ return snprintf(buf, PAGE_SIZE, "\n");
+
+ return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ vha->fcoe_vn_port_mac[5], vha->fcoe_vn_port_mac[4],
+ vha->fcoe_vn_port_mac[3], vha->fcoe_vn_port_mac[2],
+ vha->fcoe_vn_port_mac[1], vha->fcoe_vn_port_mac[0]);
+}
+
+static ssize_t
+qla2x00_fabric_param_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", vha->hw->switch_cap);
+}
+
+static ssize_t
+qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+ int rval;
+ uint16_t state[5];
+
+ rval = qla2x00_get_firmware_state(vha, state);
+ if (rval != QLA_SUCCESS)
+ memset(state, -1, sizeof(state));
+
+ return snprintf(buf, PAGE_SIZE, "0x%x 0x%x 0x%x 0x%x 0x%x\n", state[0],
+ state[1], state[2], state[3], state[4]);
+}
+
static DEVICE_ATTR(driver_version, S_IRUGO, qla2x00_drvr_version_show, NULL);
static DEVICE_ATTR(fw_version, S_IRUGO, qla2x00_fw_version_show, NULL);
static DEVICE_ATTR(serial_num, S_IRUGO, qla2x00_serial_num_show, NULL);
@@ -1116,6 +1277,11 @@
static DEVICE_ATTR(phy_version, S_IRUGO, qla2x00_phy_version_show, NULL);
static DEVICE_ATTR(flash_block_size, S_IRUGO, qla2x00_flash_block_size_show,
NULL);
+static DEVICE_ATTR(vlan_id, S_IRUGO, qla2x00_vlan_id_show, NULL);
+static DEVICE_ATTR(vn_port_mac_address, S_IRUGO,
+ qla2x00_vn_port_mac_address_show, NULL);
+static DEVICE_ATTR(fabric_param, S_IRUGO, qla2x00_fabric_param_show, NULL);
+static DEVICE_ATTR(fw_state, S_IRUGO, qla2x00_fw_state_show, NULL);
struct device_attribute *qla2x00_host_attrs[] = {
&dev_attr_driver_version,
@@ -1138,6 +1304,10 @@
&dev_attr_mpi_version,
&dev_attr_phy_version,
&dev_attr_flash_block_size,
+ &dev_attr_vlan_id,
+ &dev_attr_vn_port_mac_address,
+ &dev_attr_fabric_param,
+ &dev_attr_fw_state,
NULL,
};
@@ -1313,7 +1483,8 @@
* At this point all fcport's software-states are cleared. Perform any
* final cleanup of firmware resources (PCBs and XCBs).
*/
- if (fcport->loop_id != FC_NO_LOOP_ID)
+ if (fcport->loop_id != FC_NO_LOOP_ID &&
+ !test_bit(UNLOADING, &fcport->vha->dpc_flags))
fcport->vha->hw->isp_ops->fabric_logout(fcport->vha,
fcport->loop_id, fcport->d_id.b.domain,
fcport->d_id.b.area, fcport->d_id.b.al_pa);
@@ -1437,11 +1608,13 @@
qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
{
int ret = 0;
- int cnt = 0;
- uint8_t qos = QLA_DEFAULT_QUE_QOS;
+ uint8_t qos = 0;
scsi_qla_host_t *base_vha = shost_priv(fc_vport->shost);
scsi_qla_host_t *vha = NULL;
struct qla_hw_data *ha = base_vha->hw;
+ uint16_t options = 0;
+ int cnt;
+ struct req_que *req = ha->req_q_map[0];
ret = qla24xx_vport_create_req_sanity_check(fc_vport);
if (ret) {
@@ -1497,23 +1670,39 @@
qla24xx_vport_disable(fc_vport, disable);
- /* Create a queue pair for the vport */
- if (ha->mqenable) {
- if (ha->npiv_info) {
- for (; cnt < ha->nvram_npiv_size; cnt++) {
- if (ha->npiv_info[cnt].port_name ==
- vha->port_name &&
- ha->npiv_info[cnt].node_name ==
- vha->node_name) {
- qos = ha->npiv_info[cnt].q_qos;
- break;
- }
- }
+ if (ql2xmultique_tag) {
+ req = ha->req_q_map[1];
+ goto vport_queue;
+ } else if (ql2xmaxqueues == 1 || !ha->npiv_info)
+ goto vport_queue;
+ /* Create a request queue in QoS mode for the vport */
+ for (cnt = 0; cnt < ha->nvram_npiv_size; cnt++) {
+ if (memcmp(ha->npiv_info[cnt].port_name, vha->port_name, 8) == 0
+ && memcmp(ha->npiv_info[cnt].node_name, vha->node_name,
+ 8) == 0) {
+ qos = ha->npiv_info[cnt].q_qos;
+ break;
}
- qla25xx_create_queues(vha, qos);
+ }
+ if (qos) {
+ ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, 0,
+ qos);
+ if (!ret)
+ qla_printk(KERN_WARNING, ha,
+ "Can't create request queue for vp_idx:%d\n",
+ vha->vp_idx);
+ else {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "Request Que:%d (QoS: %d) created for vp_idx:%d\n",
+ ret, qos, vha->vp_idx));
+ req = ha->req_q_map[ret];
+ }
}
+vport_queue:
+ vha->req = req;
return 0;
+
vport_create_failed_2:
qla24xx_disable_vp(vha);
qla24xx_deallocate_vp_id(vha);
@@ -1554,8 +1743,8 @@
vha->host_no, vha->vp_idx, vha));
}
- if (ha->mqenable) {
- if (qla25xx_delete_queues(vha, 0) != QLA_SUCCESS)
+ if (vha->req->id && !ql2xmultique_tag) {
+ if (qla25xx_delete_req_que(vha, vha->req) != QLA_SUCCESS)
qla_printk(KERN_WARNING, ha,
"Queue delete failed.\n");
}
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 34760f8..4a990f4 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -149,11 +149,9 @@
int rval = QLA_SUCCESS;
uint32_t cnt;
- if (RD_REG_DWORD(®->hccr) & HCCRX_RISC_PAUSE)
- return rval;
-
WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_PAUSE);
- for (cnt = 30000; (RD_REG_DWORD(®->hccr) & HCCRX_RISC_PAUSE) == 0 &&
+ for (cnt = 30000;
+ ((RD_REG_DWORD(®->host_status) & HSRX_RISC_PAUSED) == 0) &&
rval == QLA_SUCCESS; cnt--) {
if (cnt)
udelay(100);
@@ -351,7 +349,7 @@
qla25xx_copy_mq(struct qla_hw_data *ha, void *ptr, uint32_t **last_chain)
{
uint32_t cnt, que_idx;
- uint8_t req_cnt, rsp_cnt, que_cnt;
+ uint8_t que_cnt;
struct qla2xxx_mq_chain *mq = ptr;
struct device_reg_25xxmq __iomem *reg;
@@ -363,9 +361,8 @@
mq->type = __constant_htonl(DUMP_CHAIN_MQ);
mq->chain_size = __constant_htonl(sizeof(struct qla2xxx_mq_chain));
- req_cnt = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
- rsp_cnt = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
- que_cnt = req_cnt > rsp_cnt ? req_cnt : rsp_cnt;
+ que_cnt = ha->max_req_queues > ha->max_rsp_queues ?
+ ha->max_req_queues : ha->max_rsp_queues;
mq->count = htonl(que_cnt);
for (cnt = 0; cnt < que_cnt; cnt++) {
reg = (struct device_reg_25xxmq *) ((void *)
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 714ee67..00aa48d 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -93,6 +93,7 @@
#define LSD(x) ((uint32_t)((uint64_t)(x)))
#define MSD(x) ((uint32_t)((((uint64_t)(x)) >> 16) >> 16))
+#define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y)))
/*
* I/O register
@@ -179,6 +180,7 @@
#define REQUEST_ENTRY_CNT_24XX 2048 /* Number of request entries. */
#define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/
#define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/
+#define RESPONSE_ENTRY_CNT_MQ 128 /* Number of response entries.*/
struct req_que;
@@ -186,7 +188,6 @@
* SCSI Request Block
*/
typedef struct srb {
- struct req_que *que;
struct fc_port *fcport;
struct scsi_cmnd *cmd; /* Linux SCSI command pkt */
@@ -2008,7 +2009,7 @@
#define VP_RET_CODE_NOT_FOUND 6
struct qla_hw_data;
-
+struct rsp_que;
/*
* ISP operations
*/
@@ -2030,10 +2031,9 @@
void (*enable_intrs) (struct qla_hw_data *);
void (*disable_intrs) (struct qla_hw_data *);
- int (*abort_command) (struct scsi_qla_host *, srb_t *,
- struct req_que *);
- int (*target_reset) (struct fc_port *, unsigned int);
- int (*lun_reset) (struct fc_port *, unsigned int);
+ int (*abort_command) (srb_t *);
+ int (*target_reset) (struct fc_port *, unsigned int, int);
+ int (*lun_reset) (struct fc_port *, unsigned int, int);
int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
uint8_t, uint8_t, uint16_t *, uint8_t);
int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
@@ -2079,7 +2079,6 @@
#define QLA_PCI_MSIX_CONTROL 0xa2
struct scsi_qla_host;
-struct rsp_que;
struct qla_msix_entry {
int have_irq;
@@ -2140,7 +2139,6 @@
#define MBC_INITIALIZE_MULTIQ 0x1f
#define QLA_QUE_PAGE 0X1000
#define QLA_MQ_SIZE 32
-#define QLA_MAX_HOST_QUES 16
#define QLA_MAX_QUEUES 256
#define ISP_QUE_REG(ha, id) \
((ha->mqenable) ? \
@@ -2170,6 +2168,8 @@
struct qla_hw_data *hw;
struct qla_msix_entry *msix;
struct req_que *req;
+ srb_t *status_srb; /* status continuation entry */
+ struct work_struct q_work;
};
/* Request queue data structure */
@@ -2222,6 +2222,8 @@
uint32_t fce_enabled :1;
uint32_t fac_supported :1;
uint32_t chip_reset_done :1;
+ uint32_t port0 :1;
+ uint32_t running_gold_fw :1;
} flags;
/* This spinlock is used to protect "io transactions", you must
@@ -2246,7 +2248,8 @@
struct rsp_que **rsp_q_map;
unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
- uint16_t max_queues;
+ uint8_t max_req_queues;
+ uint8_t max_rsp_queues;
struct qla_npiv_entry *npiv_info;
uint16_t nvram_npiv_size;
@@ -2255,6 +2258,9 @@
#define FLOGI_MID_SUPPORT BIT_10
#define FLOGI_VSAN_SUPPORT BIT_12
#define FLOGI_SP_SUPPORT BIT_13
+
+ uint8_t port_no; /* Physical port of adapter */
+
/* Timeout timers. */
uint8_t loop_down_abort_time; /* port down timer */
atomic_t loop_down_timer; /* loop down timer */
@@ -2392,6 +2398,14 @@
dma_addr_t edc_data_dma;
uint16_t edc_data_len;
+#define XGMAC_DATA_SIZE PAGE_SIZE
+ void *xgmac_data;
+ dma_addr_t xgmac_data_dma;
+
+#define DCBX_TLV_DATA_SIZE PAGE_SIZE
+ void *dcbx_tlv;
+ dma_addr_t dcbx_tlv_dma;
+
struct task_struct *dpc_thread;
uint8_t dpc_active; /* DPC routine is active */
@@ -2510,6 +2524,7 @@
uint32_t flt_region_vpd;
uint32_t flt_region_nvram;
uint32_t flt_region_npiv_conf;
+ uint32_t flt_region_gold_fw;
/* Needed for BEACON */
uint16_t beacon_blink_led;
@@ -2536,6 +2551,7 @@
struct qla_chip_state_84xx *cs84xx;
struct qla_statistics qla_stats;
struct isp_operations *isp_ops;
+ struct workqueue_struct *wq;
};
/*
@@ -2545,6 +2561,8 @@
struct list_head list;
struct list_head vp_fcports; /* list of fcports */
struct list_head work_list;
+ spinlock_t work_lock;
+
/* Commonly used flags and state information. */
struct Scsi_Host *host;
unsigned long host_no;
@@ -2591,8 +2609,6 @@
#define SWITCH_FOUND BIT_0
#define DFLG_NO_CABLE BIT_1
- srb_t *status_srb; /* Status continuation entry. */
-
/* ISP configuration data. */
uint16_t loop_id; /* Host adapter loop id */
@@ -2618,6 +2634,11 @@
uint8_t node_name[WWN_SIZE];
uint8_t port_name[WWN_SIZE];
uint8_t fabric_node_name[WWN_SIZE];
+
+ uint16_t fcoe_vlan_id;
+ uint16_t fcoe_fcf_idx;
+ uint8_t fcoe_vn_port_mac[6];
+
uint32_t vp_abort_cnt;
struct fc_vport *fc_vport; /* holds fc_vport * for each vport */
@@ -2643,7 +2664,7 @@
#define VP_ERR_FAB_LOGOUT 4
#define VP_ERR_ADAP_NORESOURCES 5
struct qla_hw_data *hw;
- int req_ques[QLA_MAX_HOST_QUES];
+ struct req_que *req;
} scsi_qla_host_t;
/*
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 96ccb96..dfde2dd 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -878,7 +878,6 @@
/* HCCR statuses. */
#define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */
#define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */
-#define HCCRX_RISC_PAUSE BIT_4 /* RISC Pause mode bit. */
/* HCCR commands. */
/* NOOP. */
#define HCCRX_NOOP 0x00000000
@@ -1241,6 +1240,7 @@
#define FLT_REG_HW_EVENT_1 0x1f
#define FLT_REG_NPIV_CONF_0 0x29
#define FLT_REG_NPIV_CONF_1 0x2a
+#define FLT_REG_GOLD_FW 0x2f
struct qla_flt_region {
uint32_t code;
@@ -1405,6 +1405,8 @@
#define MBC_IDC_ACK 0x101
#define MBC_RESTART_MPI_FW 0x3d
#define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */
+#define MBC_GET_XGMAC_STATS 0x7a
+#define MBC_GET_DCBX_PARAMS 0x51
/* Flash access control option field bit definitions */
#define FAC_OPT_FORCE_SEMAPHORE BIT_15
@@ -1711,7 +1713,7 @@
#define FA_VPD0_ADDR_81 0xD0000
#define FA_VPD1_ADDR_81 0xD0400
#define FA_NVRAM0_ADDR_81 0xD0080
-#define FA_NVRAM1_ADDR_81 0xD0480
+#define FA_NVRAM1_ADDR_81 0xD0180
#define FA_FEATURE_ADDR_81 0xD4000
#define FA_FLASH_DESCR_ADDR_81 0xD8000
#define FA_FLASH_LAYOUT_ADDR_81 0xD8400
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 528913f..65b12d8 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -65,8 +65,11 @@
extern int ql2xallocfwdump;
extern int ql2xextended_error_logging;
extern int ql2xqfullrampup;
+extern int ql2xqfulltracking;
extern int ql2xiidmaenable;
extern int ql2xmaxqueues;
+extern int ql2xmultique_tag;
+extern int ql2xfwloadbin;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
@@ -145,7 +148,7 @@
extern int
qla2x00_execute_fw(scsi_qla_host_t *, uint32_t);
-extern void
+extern int
qla2x00_get_fw_version(scsi_qla_host_t *, uint16_t *, uint16_t *, uint16_t *,
uint16_t *, uint32_t *, uint8_t *, uint32_t *, uint8_t *);
@@ -165,13 +168,13 @@
qla2x00_issue_iocb(scsi_qla_host_t *, void *, dma_addr_t, size_t);
extern int
-qla2x00_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
+qla2x00_abort_command(srb_t *);
extern int
-qla2x00_abort_target(struct fc_port *, unsigned int);
+qla2x00_abort_target(struct fc_port *, unsigned int, int);
extern int
-qla2x00_lun_reset(struct fc_port *, unsigned int);
+qla2x00_lun_reset(struct fc_port *, unsigned int, int);
extern int
qla2x00_get_adapter_id(scsi_qla_host_t *, uint16_t *, uint8_t *, uint8_t *,
@@ -236,9 +239,11 @@
qla24xx_get_isp_stats(scsi_qla_host_t *, struct link_statistics *,
dma_addr_t);
-extern int qla24xx_abort_command(scsi_qla_host_t *, srb_t *, struct req_que *);
-extern int qla24xx_abort_target(struct fc_port *, unsigned int);
-extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
+extern int qla24xx_abort_command(srb_t *);
+extern int
+qla24xx_abort_target(struct fc_port *, unsigned int, int);
+extern int
+qla24xx_lun_reset(struct fc_port *, unsigned int, int);
extern int
qla2x00_system_error(scsi_qla_host_t *);
@@ -288,6 +293,18 @@
extern int
qla81xx_fac_erase_sector(scsi_qla_host_t *, uint32_t, uint32_t);
+extern int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t *);
+
+extern int
+qla2x00_get_dcbx_params(scsi_qla_host_t *, dma_addr_t, uint16_t);
+
+extern int
+qla2x00_read_ram_word(scsi_qla_host_t *, uint32_t, uint32_t *);
+
+extern int
+qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
@@ -295,8 +312,8 @@
extern irqreturn_t qla2300_intr_handler(int, void *);
extern irqreturn_t qla24xx_intr_handler(int, void *);
extern void qla2x00_process_response_queue(struct rsp_que *);
-extern void qla24xx_process_response_queue(struct rsp_que *);
-
+extern void
+qla24xx_process_response_queue(struct scsi_qla_host *, struct rsp_que *);
extern int qla2x00_request_irqs(struct qla_hw_data *, struct rsp_que *);
extern void qla2x00_free_irqs(scsi_qla_host_t *);
@@ -401,19 +418,21 @@
extern int qla25xx_init_req_que(struct scsi_qla_host *, struct req_que *);
extern int qla25xx_init_rsp_que(struct scsi_qla_host *, struct rsp_que *);
extern int qla25xx_create_req_que(struct qla_hw_data *, uint16_t, uint8_t,
- uint16_t, uint8_t, uint8_t);
+ uint16_t, int, uint8_t);
extern int qla25xx_create_rsp_que(struct qla_hw_data *, uint16_t, uint8_t,
- uint16_t);
+ uint16_t, int);
extern int qla25xx_update_req_que(struct scsi_qla_host *, uint8_t, uint8_t);
extern void qla2x00_init_response_q_entries(struct rsp_que *);
extern int qla25xx_delete_req_que(struct scsi_qla_host *, struct req_que *);
extern int qla25xx_delete_rsp_que(struct scsi_qla_host *, struct rsp_que *);
extern int qla25xx_create_queues(struct scsi_qla_host *, uint8_t);
-extern int qla25xx_delete_queues(struct scsi_qla_host *, uint8_t);
+extern int qla25xx_delete_queues(struct scsi_qla_host *);
extern uint16_t qla24xx_rd_req_reg(struct qla_hw_data *, uint16_t);
extern uint16_t qla25xx_rd_req_reg(struct qla_hw_data *, uint16_t);
extern void qla24xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla25xx_wrt_req_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla25xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
extern void qla24xx_wrt_rsp_reg(struct qla_hw_data *, uint16_t, uint16_t);
+extern struct scsi_qla_host * qla25xx_get_host(struct rsp_que *);
+
#endif /* _QLA_GBL_H */
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 557f58d..917534b 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -1107,7 +1107,7 @@
return ret;
ha->isp_ops->fabric_login(vha, vha->mgmt_svr_loop_id, 0xff, 0xff, 0xfa,
- mb, BIT_1);
+ mb, BIT_1|BIT_0);
if (mb[0] != MBS_COMMAND_COMPLETE) {
DEBUG2_13(printk("%s(%ld): Failed MANAGEMENT_SERVER login: "
"loop_id=%x mb[0]=%x mb[1]=%x mb[2]=%x mb[6]=%x mb[7]=%x\n",
@@ -1879,6 +1879,9 @@
case BIT_13:
list[i].fp_speed = PORT_SPEED_4GB;
break;
+ case BIT_12:
+ list[i].fp_speed = PORT_SPEED_10GB;
+ break;
case BIT_11:
list[i].fp_speed = PORT_SPEED_8GB;
break;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bd7dd84..2620261 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -634,7 +634,7 @@
goto chip_diag_failed;
DEBUG3(printk("scsi(%ld): Reset register cleared by chip reset\n",
- ha->host_no));
+ vha->host_no));
/* Reset RISC processor. */
WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
@@ -655,7 +655,7 @@
goto chip_diag_failed;
/* Check product ID of chip */
- DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", ha->host_no));
+ DEBUG3(printk("scsi(%ld): Checking product ID of chip\n", vha->host_no));
mb[1] = RD_MAILBOX_REG(ha, reg, 1);
mb[2] = RD_MAILBOX_REG(ha, reg, 2);
@@ -730,9 +730,6 @@
struct qla_hw_data *ha = vha->hw;
struct req_que *req = ha->req_q_map[0];
- /* Perform RISC reset. */
- qla24xx_reset_risc(vha);
-
ha->fw_transfer_size = REQUEST_ENTRY_SIZE * req->length;
rval = qla2x00_mbx_reg_test(vha);
@@ -786,7 +783,6 @@
sizeof(uint32_t);
if (ha->mqenable)
mq_size = sizeof(struct qla2xxx_mq_chain);
-
/* Allocate memory for Fibre Channel Event Buffer. */
if (!IS_QLA25XX(ha) && !IS_QLA81XX(ha))
goto try_eft;
@@ -850,8 +846,7 @@
rsp_q_size = rsp->length * sizeof(response_t);
dump_size = offsetof(struct qla2xxx_fw_dump, isp);
- dump_size += fixed_size + mem_size + req_q_size + rsp_q_size +
- eft_size;
+ dump_size += fixed_size + mem_size + req_q_size + rsp_q_size + eft_size;
ha->chain_offset = dump_size;
dump_size += mq_size + fce_size;
@@ -891,6 +886,56 @@
htonl(offsetof(struct qla2xxx_fw_dump, isp));
}
+static int
+qla81xx_mpi_sync(scsi_qla_host_t *vha)
+{
+#define MPS_MASK 0xe0
+ int rval;
+ uint16_t dc;
+ uint32_t dw;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA81XX(vha->hw))
+ return QLA_SUCCESS;
+
+ rval = qla2x00_write_ram_word(vha, 0x7c00, 1);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "Sync-MPI: Unable to acquire semaphore.\n"));
+ goto done;
+ }
+
+ pci_read_config_word(vha->hw->pdev, 0x54, &dc);
+ rval = qla2x00_read_ram_word(vha, 0x7a15, &dw);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "Sync-MPI: Unable to read sync.\n"));
+ goto done_release;
+ }
+
+ dc &= MPS_MASK;
+ if (dc == (dw & MPS_MASK))
+ goto done_release;
+
+ dw &= ~MPS_MASK;
+ dw |= dc;
+ rval = qla2x00_write_ram_word(vha, 0x7a15, dw);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "Sync-MPI: Unable to gain sync.\n"));
+ }
+
+done_release:
+ rval = qla2x00_write_ram_word(vha, 0x7c00, 0);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "Sync-MPI: Unable to release semaphore.\n"));
+ }
+
+done:
+ return rval;
+}
+
/**
* qla2x00_setup_chip() - Load and start RISC firmware.
* @ha: HA context
@@ -915,6 +960,8 @@
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+ qla81xx_mpi_sync(vha);
+
/* Load firmware sequences */
rval = ha->isp_ops->load_risc(vha, &srisc_address);
if (rval == QLA_SUCCESS) {
@@ -931,13 +978,16 @@
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS) {
fw_major_version = ha->fw_major_version;
- qla2x00_get_fw_version(vha,
+ rval = qla2x00_get_fw_version(vha,
&ha->fw_major_version,
&ha->fw_minor_version,
&ha->fw_subminor_version,
&ha->fw_attributes, &ha->fw_memory_size,
ha->mpi_version, &ha->mpi_capabilities,
ha->phy_version);
+ if (rval != QLA_SUCCESS)
+ goto failed;
+
ha->flags.npiv_supported = 0;
if (IS_QLA2XXX_MIDTYPE(ha) &&
(ha->fw_attributes & BIT_2)) {
@@ -989,7 +1039,7 @@
ha->fw_subminor_version);
}
}
-
+failed:
if (rval) {
DEBUG2_3(printk("scsi(%ld): Setup chip **** FAILED ****.\n",
vha->host_no));
@@ -1013,12 +1063,14 @@
uint16_t cnt;
response_t *pkt;
+ rsp->ring_ptr = rsp->ring;
+ rsp->ring_index = 0;
+ rsp->status_srb = NULL;
pkt = rsp->ring_ptr;
for (cnt = 0; cnt < rsp->length; cnt++) {
pkt->signature = RESPONSE_PROCESSED;
pkt++;
}
-
}
/**
@@ -1176,7 +1228,7 @@
if (ha->flags.msix_enabled) {
msix = &ha->msix_entries[1];
DEBUG2_17(printk(KERN_INFO
- "Reistering vector 0x%x for base que\n", msix->entry));
+ "Registering vector 0x%x for base que\n", msix->entry));
icb->msix = cpu_to_le16(msix->entry);
}
/* Use alternate PCI bus number */
@@ -1230,14 +1282,14 @@
spin_lock_irqsave(&ha->hardware_lock, flags);
/* Clear outstanding commands array. */
- for (que = 0; que < ha->max_queues; que++) {
+ for (que = 0; que < ha->max_req_queues; que++) {
req = ha->req_q_map[que];
if (!req)
continue;
- for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
req->outstanding_cmds[cnt] = NULL;
- req->current_outstanding_cmd = 0;
+ req->current_outstanding_cmd = 1;
/* Initialize firmware. */
req->ring_ptr = req->ring;
@@ -1245,13 +1297,10 @@
req->cnt = req->length;
}
- for (que = 0; que < ha->max_queues; que++) {
+ for (que = 0; que < ha->max_rsp_queues; que++) {
rsp = ha->rsp_q_map[que];
if (!rsp)
continue;
- rsp->ring_ptr = rsp->ring;
- rsp->ring_index = 0;
-
/* Initialize response queue entries */
qla2x00_init_response_q_entries(rsp);
}
@@ -1307,7 +1356,7 @@
unsigned long wtime, mtime, cs84xx_time;
uint16_t min_wait; /* Minimum wait time if loop is down */
uint16_t wait_time; /* Wait time if loop is coming ready */
- uint16_t state[3];
+ uint16_t state[5];
struct qla_hw_data *ha = vha->hw;
rval = QLA_SUCCESS;
@@ -1406,8 +1455,9 @@
vha->host_no, state[0], jiffies));
} while (1);
- DEBUG(printk("scsi(%ld): fw_state=%x curr time=%lx.\n",
- vha->host_no, state[0], jiffies));
+ DEBUG(printk("scsi(%ld): fw_state=%x (%x, %x, %x, %x) curr time=%lx.\n",
+ vha->host_no, state[0], state[1], state[2], state[3], state[4],
+ jiffies));
if (rval) {
DEBUG2_3(printk("scsi(%ld): Firmware ready **** FAILED ****.\n",
@@ -1541,6 +1591,7 @@
char *st, *en;
uint16_t index;
struct qla_hw_data *ha = vha->hw;
+ int use_tbl = !IS_QLA25XX(ha) && !IS_QLA81XX(ha);
if (memcmp(model, BINZERO, len) != 0) {
strncpy(ha->model_number, model, len);
@@ -1553,14 +1604,16 @@
}
index = (ha->pdev->subsystem_device & 0xff);
- if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+ if (use_tbl &&
+ ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
index < QLA_MODEL_NAMES)
strncpy(ha->model_desc,
qla2x00_model_name[index * 2 + 1],
sizeof(ha->model_desc) - 1);
} else {
index = (ha->pdev->subsystem_device & 0xff);
- if (ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
+ if (use_tbl &&
+ ha->pdev->subsystem_vendor == PCI_VENDOR_ID_QLOGIC &&
index < QLA_MODEL_NAMES) {
strcpy(ha->model_number,
qla2x00_model_name[index * 2]);
@@ -2061,8 +2114,10 @@
if (test_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags)) {
if (test_bit(LOCAL_LOOP_UPDATE, &save_flags))
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
- if (test_bit(RSCN_UPDATE, &save_flags))
+ if (test_bit(RSCN_UPDATE, &save_flags)) {
set_bit(RSCN_UPDATE, &vha->dpc_flags);
+ vha->flags.rscn_queue_overflow = 1;
+ }
}
return (rval);
@@ -2110,7 +2165,7 @@
goto cleanup_allocation;
DEBUG3(printk("scsi(%ld): Entries in ID list (%d)\n",
- ha->host_no, entries));
+ vha->host_no, entries));
DEBUG3(qla2x00_dump_buffer((uint8_t *)ha->gid_list,
entries * sizeof(struct gid_list_info)));
@@ -2243,7 +2298,8 @@
qla2x00_iidma_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
{
#define LS_UNKNOWN 2
- static char *link_speeds[5] = { "1", "2", "?", "4", "8" };
+ static char *link_speeds[] = { "1", "2", "?", "4", "8", "10" };
+ char *link_speed;
int rval;
uint16_t mb[6];
struct qla_hw_data *ha = vha->hw;
@@ -2266,10 +2322,15 @@
fcport->port_name[6], fcport->port_name[7], rval,
fcport->fp_speed, mb[0], mb[1]));
} else {
+ link_speed = link_speeds[LS_UNKNOWN];
+ if (fcport->fp_speed < 5)
+ link_speed = link_speeds[fcport->fp_speed];
+ else if (fcport->fp_speed == 0x13)
+ link_speed = link_speeds[5];
DEBUG2(qla_printk(KERN_INFO, ha,
"iIDMA adjusted to %s GB/s on "
"%02x%02x%02x%02x%02x%02x%02x%02x.\n",
- link_speeds[fcport->fp_speed], fcport->port_name[0],
+ link_speed, fcport->port_name[0],
fcport->port_name[1], fcport->port_name[2],
fcport->port_name[3], fcport->port_name[4],
fcport->port_name[5], fcport->port_name[6],
@@ -3180,9 +3241,14 @@
{
int rval = QLA_SUCCESS;
uint32_t wait_time;
- struct qla_hw_data *ha = vha->hw;
- struct req_que *req = ha->req_q_map[vha->req_ques[0]];
- struct rsp_que *rsp = req->rsp;
+ struct req_que *req;
+ struct rsp_que *rsp;
+
+ if (ql2xmultique_tag)
+ req = vha->hw->req_q_map[0];
+ else
+ req = vha->req;
+ rsp = req->rsp;
atomic_set(&vha->loop_state, LOOP_UPDATE);
clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
@@ -3448,7 +3514,7 @@
int ret = -1;
int i;
- for (i = 1; i < ha->max_queues; i++) {
+ for (i = 1; i < ha->max_rsp_queues; i++) {
rsp = ha->rsp_q_map[i];
if (rsp) {
rsp->options &= ~BIT_0;
@@ -3462,6 +3528,8 @@
"%s Rsp que:%d inited\n", __func__,
rsp->id));
}
+ }
+ for (i = 1; i < ha->max_req_queues; i++) {
req = ha->req_q_map[i];
if (req) {
/* Clear outstanding commands array. */
@@ -3566,14 +3634,15 @@
nv = ha->nvram;
/* Determine NVRAM starting address. */
- ha->nvram_size = sizeof(struct nvram_24xx);
- ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
- ha->vpd_size = FA_NVRAM_VPD_SIZE;
- ha->vpd_base = FA_NVRAM_VPD0_ADDR;
- if (PCI_FUNC(ha->pdev->devfn)) {
+ if (ha->flags.port0) {
+ ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+ ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+ } else {
ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
ha->vpd_base = FA_NVRAM_VPD1_ADDR;
}
+ ha->nvram_size = sizeof(struct nvram_24xx);
+ ha->vpd_size = FA_NVRAM_VPD_SIZE;
/* Get VPD data into cache */
ha->vpd = ha->nvram + VPD_OFFSET;
@@ -3587,7 +3656,7 @@
for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
chksum += le32_to_cpu(*dptr++);
- DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+ DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
@@ -3612,7 +3681,7 @@
nv->exchange_count = __constant_cpu_to_le16(0);
nv->hard_address = __constant_cpu_to_le16(124);
nv->port_name[0] = 0x21;
- nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[1] = 0x00 + ha->port_no;
nv->port_name[2] = 0x00;
nv->port_name[3] = 0xe0;
nv->port_name[4] = 0x8b;
@@ -3798,11 +3867,11 @@
}
static int
-qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr)
+qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr,
+ uint32_t faddr)
{
int rval = QLA_SUCCESS;
int segments, fragment;
- uint32_t faddr;
uint32_t *dcode, dlen;
uint32_t risc_addr;
uint32_t risc_size;
@@ -3811,12 +3880,11 @@
struct req_que *req = ha->req_q_map[0];
qla_printk(KERN_INFO, ha,
- "FW: Loading from flash (%x)...\n", ha->flt_region_fw);
+ "FW: Loading from flash (%x)...\n", faddr);
rval = QLA_SUCCESS;
segments = FA_RISC_CODE_SEGMENTS;
- faddr = ha->flt_region_fw;
dcode = (uint32_t *)req->ring;
*srisc_addr = 0;
@@ -4104,6 +4172,9 @@
{
int rval;
+ if (ql2xfwloadbin == 1)
+ return qla81xx_load_risc(vha, srisc_addr);
+
/*
* FW Load priority:
* 1) Firmware via request-firmware interface (.bin file).
@@ -4113,24 +4184,45 @@
if (rval == QLA_SUCCESS)
return rval;
- return qla24xx_load_risc_flash(vha, srisc_addr);
+ return qla24xx_load_risc_flash(vha, srisc_addr,
+ vha->hw->flt_region_fw);
}
int
qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
{
int rval;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (ql2xfwloadbin == 2)
+ goto try_blob_fw;
/*
* FW Load priority:
* 1) Firmware residing in flash.
* 2) Firmware via request-firmware interface (.bin file).
+ * 3) Golden-Firmware residing in flash -- limited operation.
*/
- rval = qla24xx_load_risc_flash(vha, srisc_addr);
+ rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_fw);
if (rval == QLA_SUCCESS)
return rval;
- return qla24xx_load_risc_blob(vha, srisc_addr);
+try_blob_fw:
+ rval = qla24xx_load_risc_blob(vha, srisc_addr);
+ if (rval == QLA_SUCCESS || !ha->flt_region_gold_fw)
+ return rval;
+
+ qla_printk(KERN_ERR, ha,
+ "FW: Attempting to fallback to golden firmware...\n");
+ rval = qla24xx_load_risc_flash(vha, srisc_addr, ha->flt_region_gold_fw);
+ if (rval != QLA_SUCCESS)
+ return rval;
+
+ qla_printk(KERN_ERR, ha,
+ "FW: Please update operational firmware...\n");
+ ha->flags.running_gold_fw = 1;
+
+ return rval;
}
void
@@ -4146,7 +4238,7 @@
ret = qla2x00_stop_firmware(vha);
for (retries = 5; ret != QLA_SUCCESS && ret != QLA_FUNCTION_TIMEOUT &&
- retries ; retries--) {
+ ret != QLA_INVALID_COMMAND && retries ; retries--) {
ha->isp_ops->reset_chip(vha);
if (ha->isp_ops->chip_diag(vha) != QLA_SUCCESS)
continue;
@@ -4165,13 +4257,19 @@
uint16_t mb[MAILBOX_REGISTER_COUNT];
struct qla_hw_data *ha = vha->hw;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
- struct req_que *req = ha->req_q_map[vha->req_ques[0]];
- struct rsp_que *rsp = req->rsp;
+ struct req_que *req;
+ struct rsp_que *rsp;
if (!vha->vp_idx)
return -EINVAL;
rval = qla2x00_fw_ready(base_vha);
+ if (ql2xmultique_tag)
+ req = ha->req_q_map[0];
+ else
+ req = vha->req;
+ rsp = req->rsp;
+
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &vha->dpc_flags);
qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL);
@@ -4305,7 +4403,7 @@
for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
chksum += le32_to_cpu(*dptr++);
- DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+ DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", vha->host_no));
DEBUG5(qla2x00_dump_buffer((uint8_t *)nv, ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
@@ -4329,7 +4427,7 @@
nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
nv->exchange_count = __constant_cpu_to_le16(0);
nv->port_name[0] = 0x21;
- nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[1] = 0x00 + ha->port_no;
nv->port_name[2] = 0x00;
nv->port_name[3] = 0xe0;
nv->port_name[4] = 0x8b;
@@ -4358,12 +4456,12 @@
nv->max_luns_per_target = __constant_cpu_to_le16(128);
nv->port_down_retry_count = __constant_cpu_to_le16(30);
nv->link_down_timeout = __constant_cpu_to_le16(30);
- nv->enode_mac[0] = 0x01;
+ nv->enode_mac[0] = 0x00;
nv->enode_mac[1] = 0x02;
nv->enode_mac[2] = 0x03;
nv->enode_mac[3] = 0x04;
nv->enode_mac[4] = 0x05;
- nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+ nv->enode_mac[5] = 0x06 + ha->port_no;
rval = 1;
}
@@ -4396,7 +4494,7 @@
icb->enode_mac[2] = 0x03;
icb->enode_mac[3] = 0x04;
icb->enode_mac[4] = 0x05;
- icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+ icb->enode_mac[5] = 0x06 + ha->port_no;
}
/* Use extended-initialization control block. */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index a8abbb9..13396be 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -15,6 +15,7 @@
struct rsp_que *rsp);
static void qla2x00_isp_cmd(struct scsi_qla_host *, struct req_que *);
+static void qla25xx_set_que(srb_t *, struct rsp_que **);
/**
* qla2x00_get_cmd_direction() - Determine control_flag data direction.
* @cmd: SCSI command
@@ -92,9 +93,10 @@
* Returns a pointer to the Continuation Type 0 IOCB packet.
*/
static inline cont_entry_t *
-qla2x00_prep_cont_type0_iocb(struct req_que *req, struct scsi_qla_host *vha)
+qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha)
{
cont_entry_t *cont_pkt;
+ struct req_que *req = vha->req;
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
@@ -120,10 +122,11 @@
* Returns a pointer to the continuation type 1 IOCB packet.
*/
static inline cont_a64_entry_t *
-qla2x00_prep_cont_type1_iocb(struct req_que *req, scsi_qla_host_t *vha)
+qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha)
{
cont_a64_entry_t *cont_pkt;
+ struct req_que *req = vha->req;
/* Adjust ring index. */
req->ring_index++;
if (req->ring_index == req->length) {
@@ -159,7 +162,6 @@
struct scsi_cmnd *cmd;
struct scatterlist *sg;
int i;
- struct req_que *req;
cmd = sp->cmd;
@@ -174,8 +176,6 @@
}
vha = sp->fcport->vha;
- req = sp->que;
-
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
/* Three DSDs are available in the Command Type 2 IOCB */
@@ -192,7 +192,7 @@
* Seven DSDs are available in the Continuation
* Type 0 IOCB.
*/
- cont_pkt = qla2x00_prep_cont_type0_iocb(req, vha);
+ cont_pkt = qla2x00_prep_cont_type0_iocb(vha);
cur_dsd = (uint32_t *)&cont_pkt->dseg_0_address;
avail_dsds = 7;
}
@@ -220,7 +220,6 @@
struct scsi_cmnd *cmd;
struct scatterlist *sg;
int i;
- struct req_que *req;
cmd = sp->cmd;
@@ -235,8 +234,6 @@
}
vha = sp->fcport->vha;
- req = sp->que;
-
cmd_pkt->control_flags |= cpu_to_le16(qla2x00_get_cmd_direction(sp));
/* Two DSDs are available in the Command Type 3 IOCB */
@@ -254,7 +251,7 @@
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
- cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+ cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
@@ -353,7 +350,6 @@
/* Build command packet */
req->current_outstanding_cmd = handle;
req->outstanding_cmds[handle] = sp;
- sp->que = req;
sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
req->cnt -= req_cnt;
@@ -453,6 +449,7 @@
mrk24->lun[2] = MSB(lun);
host_to_fcp_swap(mrk24->lun, sizeof(mrk24->lun));
mrk24->vp_index = vha->vp_idx;
+ mrk24->handle = MAKE_HANDLE(req->id, mrk24->handle);
} else {
SET_TARGET_ID(ha, mrk->target, loop_id);
mrk->lun = cpu_to_le16(lun);
@@ -531,9 +528,6 @@
for (cnt = 0; cnt < REQUEST_ENTRY_SIZE / 4; cnt++)
*dword_ptr++ = 0;
- /* Set system defined field. */
- pkt->sys_define = (uint8_t)req->ring_index;
-
/* Set entry count. */
pkt->entry_count = 1;
@@ -656,7 +650,7 @@
}
vha = sp->fcport->vha;
- req = sp->que;
+ req = vha->req;
/* Set transfer direction */
if (cmd->sc_data_direction == DMA_TO_DEVICE) {
@@ -687,7 +681,7 @@
* Five DSDs are available in the Continuation
* Type 1 IOCB.
*/
- cont_pkt = qla2x00_prep_cont_type1_iocb(req, vha);
+ cont_pkt = qla2x00_prep_cont_type1_iocb(vha);
cur_dsd = (uint32_t *)cont_pkt->dseg_0_address;
avail_dsds = 5;
}
@@ -724,19 +718,13 @@
struct scsi_cmnd *cmd = sp->cmd;
struct scsi_qla_host *vha = sp->fcport->vha;
struct qla_hw_data *ha = vha->hw;
- uint16_t que_id;
/* Setup device pointers. */
ret = 0;
- que_id = vha->req_ques[0];
- req = ha->req_q_map[que_id];
- sp->que = req;
+ qla25xx_set_que(sp, &rsp);
+ req = vha->req;
- if (req->rsp)
- rsp = req->rsp;
- else
- rsp = ha->rsp_q_map[que_id];
/* So we know we haven't pci_map'ed anything yet */
tot_dsds = 0;
@@ -794,7 +782,7 @@
req->cnt -= req_cnt;
cmd_pkt = (struct cmd_type_7 *)req->ring_ptr;
- cmd_pkt->handle = handle;
+ cmd_pkt->handle = MAKE_HANDLE(req->id, handle);
/* Zero out remaining portion of packet. */
/* tagged queuing modifier -- default is TSK_SIMPLE (0). */
@@ -823,6 +811,8 @@
/* Set total data segment count. */
cmd_pkt->entry_count = (uint8_t)req_cnt;
+ /* Specify response queue number where completion should happen */
+ cmd_pkt->entry_status = (uint8_t) rsp->id;
wmb();
/* Adjust ring index. */
@@ -842,7 +832,7 @@
/* Manage unprocessed RIO/ZIO commands in response queue. */
if (vha->flags.process_response_queue &&
rsp->ring_ptr->signature != RESPONSE_PROCESSED)
- qla24xx_process_response_queue(rsp);
+ qla24xx_process_response_queue(vha, rsp);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return QLA_SUCCESS;
@@ -855,3 +845,16 @@
return QLA_FUNCTION_FAILED;
}
+
+static void qla25xx_set_que(srb_t *sp, struct rsp_que **rsp)
+{
+ struct scsi_cmnd *cmd = sp->cmd;
+ struct qla_hw_data *ha = sp->fcport->vha->hw;
+ int affinity = cmd->request->cpu;
+
+ if (ql2xmultique_tag && affinity >= 0 &&
+ affinity < ha->max_rsp_queues - 1)
+ *rsp = ha->rsp_q_map[affinity + 1];
+ else
+ *rsp = ha->rsp_q_map[0];
+}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d049818..c8d0a17 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -13,10 +13,9 @@
static void qla2x00_process_completed_request(struct scsi_qla_host *,
struct req_que *, uint32_t);
static void qla2x00_status_entry(scsi_qla_host_t *, struct rsp_que *, void *);
-static void qla2x00_status_cont_entry(scsi_qla_host_t *, sts_cont_entry_t *);
+static void qla2x00_status_cont_entry(struct rsp_que *, sts_cont_entry_t *);
static void qla2x00_error_entry(scsi_qla_host_t *, struct rsp_que *,
sts_entry_t *);
-static struct scsi_qla_host *qla2x00_get_rsp_host(struct rsp_que *);
/**
* qla2100_intr_handler() - Process interrupts for the ISP2100 and ISP2200.
@@ -51,7 +50,7 @@
status = 0;
spin_lock(&ha->hardware_lock);
- vha = qla2x00_get_rsp_host(rsp);
+ vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
hccr = RD_REG_WORD(®->hccr);
if (hccr & HCCR_RISC_PAUSE) {
@@ -147,7 +146,7 @@
status = 0;
spin_lock(&ha->hardware_lock);
- vha = qla2x00_get_rsp_host(rsp);
+ vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->u.isp2300.host_status);
if (stat & HSR_RISC_PAUSED) {
@@ -685,7 +684,7 @@
vha->host_no));
if (IS_FWI2_CAPABLE(ha))
- qla24xx_process_response_queue(rsp);
+ qla24xx_process_response_queue(vha, rsp);
else
qla2x00_process_response_queue(rsp);
break;
@@ -766,7 +765,10 @@
struct qla_hw_data *ha = vha->hw;
struct req_que *req = NULL;
- req = ha->req_q_map[vha->req_ques[0]];
+ if (!ql2xqfulltracking)
+ return;
+
+ req = vha->req;
if (!req)
return;
if (req->max_q_depth <= sdev->queue_depth)
@@ -808,6 +810,9 @@
fc_port_t *fcport;
struct scsi_device *sdev;
+ if (!ql2xqfulltracking)
+ return;
+
sdev = sp->cmd->device;
if (sdev->queue_depth >= req->max_q_depth)
return;
@@ -858,8 +863,8 @@
qla2x00_ramp_up_queue_depth(vha, req, sp);
qla2x00_sp_compl(ha, sp);
} else {
- DEBUG2(printk("scsi(%ld): Invalid ISP SCSI completion handle\n",
- vha->host_no));
+ DEBUG2(printk("scsi(%ld) Req:%d: Invalid ISP SCSI completion"
+ " handle(%d)\n", vha->host_no, req->id, index));
qla_printk(KERN_WARNING, ha,
"Invalid ISP SCSI completion handle\n");
@@ -881,7 +886,7 @@
uint16_t handle_cnt;
uint16_t cnt;
- vha = qla2x00_get_rsp_host(rsp);
+ vha = pci_get_drvdata(ha->pdev);
if (!vha->flags.online)
return;
@@ -926,7 +931,7 @@
}
break;
case STATUS_CONT_TYPE:
- qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+ qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
break;
default:
/* Type Not Supported. */
@@ -945,7 +950,8 @@
}
static inline void
-qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
+qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len,
+ struct rsp_que *rsp)
{
struct scsi_cmnd *cp = sp->cmd;
@@ -962,7 +968,7 @@
sp->request_sense_ptr += sense_len;
sp->request_sense_length -= sense_len;
if (sp->request_sense_length != 0)
- sp->fcport->vha->status_srb = sp;
+ rsp->status_srb = sp;
DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
"cmd=%p pid=%ld\n", __func__, sp->fcport->vha->host_no,
@@ -992,7 +998,9 @@
uint32_t sense_len, rsp_info_len, resid_len, fw_resid_len;
uint8_t *rsp_info, *sense_data;
struct qla_hw_data *ha = vha->hw;
- struct req_que *req = rsp->req;
+ uint32_t handle;
+ uint16_t que;
+ struct req_que *req;
sts = (sts_entry_t *) pkt;
sts24 = (struct sts_entry_24xx *) pkt;
@@ -1003,18 +1011,20 @@
comp_status = le16_to_cpu(sts->comp_status);
scsi_status = le16_to_cpu(sts->scsi_status) & SS_MASK;
}
-
+ handle = (uint32_t) LSW(sts->handle);
+ que = MSW(sts->handle);
+ req = ha->req_q_map[que];
/* Fast path completion. */
if (comp_status == CS_COMPLETE && scsi_status == 0) {
- qla2x00_process_completed_request(vha, req, sts->handle);
+ qla2x00_process_completed_request(vha, req, handle);
return;
}
/* Validate handle. */
- if (sts->handle < MAX_OUTSTANDING_COMMANDS) {
- sp = req->outstanding_cmds[sts->handle];
- req->outstanding_cmds[sts->handle] = NULL;
+ if (handle < MAX_OUTSTANDING_COMMANDS) {
+ sp = req->outstanding_cmds[handle];
+ req->outstanding_cmds[handle] = NULL;
} else
sp = NULL;
@@ -1030,7 +1040,7 @@
cp = sp->cmd;
if (cp == NULL) {
DEBUG2(printk("scsi(%ld): Command already returned back to OS "
- "pkt->handle=%d sp=%p.\n", vha->host_no, sts->handle, sp));
+ "pkt->handle=%d sp=%p.\n", vha->host_no, handle, sp));
qla_printk(KERN_WARNING, ha,
"Command is NULL: already returned to OS (sp=%p)\n", sp);
@@ -1121,6 +1131,8 @@
scsi_status));
/* Adjust queue depth for all luns on the port. */
+ if (!ql2xqfulltracking)
+ break;
fcport->last_queue_full = jiffies;
starget_for_each_device(cp->device->sdev_target,
fcport, qla2x00_adjust_sdev_qdepth_down);
@@ -1133,7 +1145,7 @@
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
- qla2x00_handle_sense(sp, sense_data, sense_len);
+ qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
break;
case CS_DATA_UNDERRUN:
@@ -1179,6 +1191,8 @@
* Adjust queue depth for all luns on the
* port.
*/
+ if (!ql2xqfulltracking)
+ break;
fcport->last_queue_full = jiffies;
starget_for_each_device(
cp->device->sdev_target, fcport,
@@ -1192,12 +1206,12 @@
if (!(scsi_status & SS_SENSE_LEN_VALID))
break;
- qla2x00_handle_sense(sp, sense_data, sense_len);
+ qla2x00_handle_sense(sp, sense_data, sense_len, rsp);
} else {
/*
* If RISC reports underrun and target does not report
* it then we must have a lost frame, so tell upper
- * layer to retry it by reporting a bus busy.
+ * layer to retry it by reporting an error.
*/
if (!(scsi_status & SS_RESIDUAL_UNDER)) {
DEBUG2(printk("scsi(%ld:%d:%d:%d) Dropped "
@@ -1207,7 +1221,7 @@
cp->device->id, cp->device->lun, resid,
scsi_bufflen(cp)));
- cp->result = DID_BUS_BUSY << 16;
+ cp->result = DID_ERROR << 16;
break;
}
@@ -1334,7 +1348,7 @@
}
/* Place command on done queue. */
- if (vha->status_srb == NULL)
+ if (rsp->status_srb == NULL)
qla2x00_sp_compl(ha, sp);
}
@@ -1346,11 +1360,11 @@
* Extended sense data.
*/
static void
-qla2x00_status_cont_entry(scsi_qla_host_t *vha, sts_cont_entry_t *pkt)
+qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
{
uint8_t sense_sz = 0;
- struct qla_hw_data *ha = vha->hw;
- srb_t *sp = vha->status_srb;
+ struct qla_hw_data *ha = rsp->hw;
+ srb_t *sp = rsp->status_srb;
struct scsi_cmnd *cp;
if (sp != NULL && sp->request_sense_length != 0) {
@@ -1362,7 +1376,7 @@
"cmd is NULL: already returned to OS (sp=%p)\n",
sp);
- vha->status_srb = NULL;
+ rsp->status_srb = NULL;
return;
}
@@ -1383,7 +1397,7 @@
/* Place command on done queue. */
if (sp->request_sense_length == 0) {
- vha->status_srb = NULL;
+ rsp->status_srb = NULL;
qla2x00_sp_compl(ha, sp);
}
}
@@ -1399,7 +1413,9 @@
{
srb_t *sp;
struct qla_hw_data *ha = vha->hw;
- struct req_que *req = rsp->req;
+ uint32_t handle = LSW(pkt->handle);
+ uint16_t que = MSW(pkt->handle);
+ struct req_que *req = ha->req_q_map[que];
#if defined(QL_DEBUG_LEVEL_2)
if (pkt->entry_status & RF_INV_E_ORDER)
qla_printk(KERN_ERR, ha, "%s: Invalid Entry Order\n", __func__);
@@ -1417,14 +1433,14 @@
#endif
/* Validate handle. */
- if (pkt->handle < MAX_OUTSTANDING_COMMANDS)
- sp = req->outstanding_cmds[pkt->handle];
+ if (handle < MAX_OUTSTANDING_COMMANDS)
+ sp = req->outstanding_cmds[handle];
else
sp = NULL;
if (sp) {
/* Free outstanding command slot. */
- req->outstanding_cmds[pkt->handle] = NULL;
+ req->outstanding_cmds[handle] = NULL;
/* Bad payload or header */
if (pkt->entry_status &
@@ -1486,13 +1502,10 @@
* qla24xx_process_response_queue() - Process response queue entries.
* @ha: SCSI driver HA context
*/
-void
-qla24xx_process_response_queue(struct rsp_que *rsp)
+void qla24xx_process_response_queue(struct scsi_qla_host *vha,
+ struct rsp_que *rsp)
{
struct sts_entry_24xx *pkt;
- struct scsi_qla_host *vha;
-
- vha = qla2x00_get_rsp_host(rsp);
if (!vha->flags.online)
return;
@@ -1523,7 +1536,7 @@
qla2x00_status_entry(vha, rsp, pkt);
break;
case STATUS_CONT_TYPE:
- qla2x00_status_cont_entry(vha, (sts_cont_entry_t *)pkt);
+ qla2x00_status_cont_entry(rsp, (sts_cont_entry_t *)pkt);
break;
case VP_RPT_ID_IOCB_TYPE:
qla24xx_report_id_acquisition(vha,
@@ -1626,7 +1639,7 @@
status = 0;
spin_lock(&ha->hardware_lock);
- vha = qla2x00_get_rsp_host(rsp);
+ vha = pci_get_drvdata(ha->pdev);
for (iter = 50; iter--; ) {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
@@ -1664,7 +1677,7 @@
break;
case 0x13:
case 0x14:
- qla24xx_process_response_queue(rsp);
+ qla24xx_process_response_queue(vha, rsp);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1692,6 +1705,7 @@
struct qla_hw_data *ha;
struct rsp_que *rsp;
struct device_reg_24xx __iomem *reg;
+ struct scsi_qla_host *vha;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
@@ -1704,7 +1718,8 @@
spin_lock_irq(&ha->hardware_lock);
- qla24xx_process_response_queue(rsp);
+ vha = qla25xx_get_host(rsp);
+ qla24xx_process_response_queue(vha, rsp);
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
spin_unlock_irq(&ha->hardware_lock);
@@ -1717,7 +1732,6 @@
{
struct qla_hw_data *ha;
struct rsp_que *rsp;
- struct device_reg_24xx __iomem *reg;
rsp = (struct rsp_que *) dev_id;
if (!rsp) {
@@ -1726,13 +1740,8 @@
return IRQ_NONE;
}
ha = rsp->hw;
- reg = &ha->iobase->isp24;
- spin_lock_irq(&ha->hardware_lock);
-
- qla24xx_process_response_queue(rsp);
-
- spin_unlock_irq(&ha->hardware_lock);
+ queue_work_on((int) (rsp->id - 1), ha->wq, &rsp->q_work);
return IRQ_HANDLED;
}
@@ -1760,7 +1769,7 @@
status = 0;
spin_lock_irq(&ha->hardware_lock);
- vha = qla2x00_get_rsp_host(rsp);
+ vha = pci_get_drvdata(ha->pdev);
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
@@ -1798,7 +1807,7 @@
break;
case 0x13:
case 0x14:
- qla24xx_process_response_queue(rsp);
+ qla24xx_process_response_queue(vha, rsp);
break;
default:
DEBUG2(printk("scsi(%ld): Unrecognized interrupt type "
@@ -1822,31 +1831,14 @@
/* Interrupt handling helpers. */
struct qla_init_msix_entry {
- uint16_t entry;
- uint16_t index;
const char *name;
irq_handler_t handler;
};
-static struct qla_init_msix_entry base_queue = {
- .entry = 0,
- .index = 0,
- .name = "qla2xxx (default)",
- .handler = qla24xx_msix_default,
-};
-
-static struct qla_init_msix_entry base_rsp_queue = {
- .entry = 1,
- .index = 1,
- .name = "qla2xxx (rsp_q)",
- .handler = qla24xx_msix_rsp_q,
-};
-
-static struct qla_init_msix_entry multi_rsp_queue = {
- .entry = 1,
- .index = 1,
- .name = "qla2xxx (multi_q)",
- .handler = qla25xx_msix_rsp_q,
+static struct qla_init_msix_entry msix_entries[3] = {
+ { "qla2xxx (default)", qla24xx_msix_default },
+ { "qla2xxx (rsp_q)", qla24xx_msix_rsp_q },
+ { "qla2xxx (multiq)", qla25xx_msix_rsp_q },
};
static void
@@ -1873,7 +1865,6 @@
int i, ret;
struct msix_entry *entries;
struct qla_msix_entry *qentry;
- struct qla_init_msix_entry *msix_queue;
entries = kzalloc(sizeof(struct msix_entry) * ha->msix_count,
GFP_KERNEL);
@@ -1900,7 +1891,7 @@
ha->msix_count, ret);
goto msix_out;
}
- ha->max_queues = ha->msix_count - 1;
+ ha->max_rsp_queues = ha->msix_count - 1;
}
ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
ha->msix_count, GFP_KERNEL);
@@ -1918,45 +1909,27 @@
qentry->rsp = NULL;
}
- /* Enable MSI-X for AENs for queue 0 */
- qentry = &ha->msix_entries[0];
- ret = request_irq(qentry->vector, base_queue.handler, 0,
- base_queue.name, rsp);
- if (ret) {
- qla_printk(KERN_WARNING, ha,
+ /* Enable MSI-X vectors for the base queue */
+ for (i = 0; i < 2; i++) {
+ qentry = &ha->msix_entries[i];
+ ret = request_irq(qentry->vector, msix_entries[i].handler,
+ 0, msix_entries[i].name, rsp);
+ if (ret) {
+ qla_printk(KERN_WARNING, ha,
"MSI-X: Unable to register handler -- %x/%d.\n",
qentry->vector, ret);
- qla24xx_disable_msix(ha);
- goto msix_out;
+ qla24xx_disable_msix(ha);
+ ha->mqenable = 0;
+ goto msix_out;
+ }
+ qentry->have_irq = 1;
+ qentry->rsp = rsp;
+ rsp->msix = qentry;
}
- qentry->have_irq = 1;
- qentry->rsp = rsp;
/* Enable MSI-X vector for response queue update for queue 0 */
- if (ha->max_queues > 1 && ha->mqiobase) {
+ if (ha->mqiobase && (ha->max_rsp_queues > 1 || ha->max_req_queues > 1))
ha->mqenable = 1;
- msix_queue = &multi_rsp_queue;
- qla_printk(KERN_INFO, ha,
- "MQ enabled, Number of Queue Resources: %d \n",
- ha->max_queues);
- } else {
- ha->mqenable = 0;
- msix_queue = &base_rsp_queue;
- }
-
- qentry = &ha->msix_entries[1];
- ret = request_irq(qentry->vector, msix_queue->handler, 0,
- msix_queue->name, rsp);
- if (ret) {
- qla_printk(KERN_WARNING, ha,
- "MSI-X: Unable to register handler -- %x/%d.\n",
- qentry->vector, ret);
- qla24xx_disable_msix(ha);
- ha->mqenable = 0;
- goto msix_out;
- }
- qentry->have_irq = 1;
- qentry->rsp = rsp;
msix_out:
kfree(entries);
@@ -2063,35 +2036,11 @@
}
}
-static struct scsi_qla_host *
-qla2x00_get_rsp_host(struct rsp_que *rsp)
-{
- srb_t *sp;
- struct qla_hw_data *ha = rsp->hw;
- struct scsi_qla_host *vha = NULL;
- struct sts_entry_24xx *pkt;
- struct req_que *req;
-
- if (rsp->id) {
- pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
- req = rsp->req;
- if (pkt && pkt->handle < MAX_OUTSTANDING_COMMANDS) {
- sp = req->outstanding_cmds[pkt->handle];
- if (sp)
- vha = sp->fcport->vha;
- }
- }
- if (!vha)
- /* handle it in base queue */
- vha = pci_get_drvdata(ha->pdev);
-
- return vha;
-}
int qla25xx_request_irq(struct rsp_que *rsp)
{
struct qla_hw_data *ha = rsp->hw;
- struct qla_init_msix_entry *intr = &multi_rsp_queue;
+ struct qla_init_msix_entry *intr = &msix_entries[2];
struct qla_msix_entry *msix = rsp->msix;
int ret;
@@ -2106,3 +2055,30 @@
msix->rsp = rsp;
return ret;
}
+
+struct scsi_qla_host *
+qla25xx_get_host(struct rsp_que *rsp)
+{
+ srb_t *sp;
+ struct qla_hw_data *ha = rsp->hw;
+ struct scsi_qla_host *vha = NULL;
+ struct sts_entry_24xx *pkt;
+ struct req_que *req;
+ uint16_t que;
+ uint32_t handle;
+
+ pkt = (struct sts_entry_24xx *) rsp->ring_ptr;
+ que = MSW(pkt->handle);
+ handle = (uint32_t) LSW(pkt->handle);
+ req = ha->req_q_map[que];
+ if (handle < MAX_OUTSTANDING_COMMANDS) {
+ sp = req->outstanding_cmds[handle];
+ if (sp)
+ return sp->fcport->vha;
+ else
+ goto base_que;
+ }
+base_que:
+ vha = pci_get_drvdata(ha->pdev);
+ return vha;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e67c166..451ece0 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -408,7 +408,7 @@
* Context:
* Kernel context.
*/
-void
+int
qla2x00_get_fw_version(scsi_qla_host_t *vha, uint16_t *major, uint16_t *minor,
uint16_t *subminor, uint16_t *attributes, uint32_t *memory, uint8_t *mpi,
uint32_t *mpi_caps, uint8_t *phy)
@@ -427,6 +427,8 @@
mcp->flags = 0;
mcp->tov = MBX_TOV_SECONDS;
rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS)
+ goto failed;
/* Return mailbox data. */
*major = mcp->mb[1];
@@ -446,7 +448,7 @@
phy[1] = mcp->mb[9] >> 8;
phy[2] = mcp->mb[9] & 0xff;
}
-
+failed:
if (rval != QLA_SUCCESS) {
/*EMPTY*/
DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
@@ -455,6 +457,7 @@
/*EMPTY*/
DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
}
+ return rval;
}
/*
@@ -748,20 +751,20 @@
* Kernel context.
*/
int
-qla2x00_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla2x00_abort_command(srb_t *sp)
{
unsigned long flags = 0;
- fc_port_t *fcport;
int rval;
uint32_t handle = 0;
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
+ fc_port_t *fcport = sp->fcport;
+ scsi_qla_host_t *vha = fcport->vha;
struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = vha->req;
DEBUG11(printk("qla2x00_abort_command(%ld): entered.\n", vha->host_no));
- fcport = sp->fcport;
-
spin_lock_irqsave(&ha->hardware_lock, flags);
for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
if (req->outstanding_cmds[handle] == sp)
@@ -800,7 +803,7 @@
}
int
-qla2x00_abort_target(struct fc_port *fcport, unsigned int l)
+qla2x00_abort_target(struct fc_port *fcport, unsigned int l, int tag)
{
int rval, rval2;
mbx_cmd_t mc;
@@ -813,8 +816,8 @@
l = l;
vha = fcport->vha;
- req = vha->hw->req_q_map[0];
- rsp = vha->hw->rsp_q_map[0];
+ req = vha->hw->req_q_map[tag];
+ rsp = vha->hw->rsp_q_map[tag];
mcp->mb[0] = MBC_ABORT_TARGET;
mcp->out_mb = MBX_9|MBX_2|MBX_1|MBX_0;
if (HAS_EXTENDED_IDS(vha->hw)) {
@@ -850,7 +853,7 @@
}
int
-qla2x00_lun_reset(struct fc_port *fcport, unsigned int l)
+qla2x00_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
{
int rval, rval2;
mbx_cmd_t mc;
@@ -862,8 +865,8 @@
DEBUG11(printk("%s(%ld): entered.\n", __func__, fcport->vha->host_no));
vha = fcport->vha;
- req = vha->hw->req_q_map[0];
- rsp = vha->hw->rsp_q_map[0];
+ req = vha->hw->req_q_map[tag];
+ rsp = vha->hw->rsp_q_map[tag];
mcp->mb[0] = MBC_LUN_RESET;
mcp->out_mb = MBX_9|MBX_3|MBX_2|MBX_1|MBX_0;
if (HAS_EXTENDED_IDS(vha->hw))
@@ -931,6 +934,8 @@
mcp->mb[9] = vha->vp_idx;
mcp->out_mb = MBX_9|MBX_0;
mcp->in_mb = MBX_9|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+ if (IS_QLA81XX(vha->hw))
+ mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
@@ -952,9 +957,19 @@
DEBUG2_3_11(printk("qla2x00_get_adapter_id(%ld): failed=%x.\n",
vha->host_no, rval));
} else {
- /*EMPTY*/
DEBUG11(printk("qla2x00_get_adapter_id(%ld): done.\n",
vha->host_no));
+
+ if (IS_QLA81XX(vha->hw)) {
+ vha->fcoe_vlan_id = mcp->mb[9] & 0xfff;
+ vha->fcoe_fcf_idx = mcp->mb[10];
+ vha->fcoe_vn_port_mac[5] = mcp->mb[11] >> 8;
+ vha->fcoe_vn_port_mac[4] = mcp->mb[11] & 0xff;
+ vha->fcoe_vn_port_mac[3] = mcp->mb[12] >> 8;
+ vha->fcoe_vn_port_mac[2] = mcp->mb[12] & 0xff;
+ vha->fcoe_vn_port_mac[1] = mcp->mb[13] >> 8;
+ vha->fcoe_vn_port_mac[0] = mcp->mb[13] & 0xff;
+ }
}
return rval;
@@ -1252,7 +1267,7 @@
mcp->mb[0] = MBC_GET_FIRMWARE_STATE;
mcp->out_mb = MBX_0;
- mcp->in_mb = MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
rval = qla2x00_mailbox_command(vha, mcp);
@@ -1261,6 +1276,8 @@
states[0] = mcp->mb[1];
states[1] = mcp->mb[2];
states[2] = mcp->mb[3];
+ states[3] = mcp->mb[4];
+ states[4] = mcp->mb[5];
if (rval != QLA_SUCCESS) {
/*EMPTY*/
@@ -1480,9 +1497,17 @@
dma_addr_t lg_dma;
uint32_t iop[2];
struct qla_hw_data *ha = vha->hw;
+ struct req_que *req;
+ struct rsp_que *rsp;
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+ if (ql2xmultique_tag)
+ req = ha->req_q_map[0];
+ else
+ req = vha->req;
+ rsp = req->rsp;
+
lg = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &lg_dma);
if (lg == NULL) {
DEBUG2_3(printk("%s(%ld): failed to allocate Login IOCB.\n",
@@ -1493,6 +1518,7 @@
lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
lg->entry_count = 1;
+ lg->handle = MAKE_HANDLE(req->id, lg->handle);
lg->nport_handle = cpu_to_le16(loop_id);
lg->control_flags = __constant_cpu_to_le16(LCF_COMMAND_PLOGI);
if (opt & BIT_0)
@@ -1741,6 +1767,8 @@
struct logio_entry_24xx *lg;
dma_addr_t lg_dma;
struct qla_hw_data *ha = vha->hw;
+ struct req_que *req;
+ struct rsp_que *rsp;
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
@@ -1752,8 +1780,14 @@
}
memset(lg, 0, sizeof(struct logio_entry_24xx));
+ if (ql2xmaxqueues > 1)
+ req = ha->req_q_map[0];
+ else
+ req = vha->req;
+ rsp = req->rsp;
lg->entry_type = LOGINOUT_PORT_IOCB_TYPE;
lg->entry_count = 1;
+ lg->handle = MAKE_HANDLE(req->id, lg->handle);
lg->nport_handle = cpu_to_le16(loop_id);
lg->control_flags =
__constant_cpu_to_le16(LCF_COMMAND_LOGO|LCF_IMPL_LOGO);
@@ -1864,9 +1898,6 @@
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
- if (IS_QLA81XX(vha->hw))
- return QLA_SUCCESS;
-
DEBUG11(printk("qla2x00_full_login_lip(%ld): entered.\n",
vha->host_no));
@@ -2195,21 +2226,21 @@
}
int
-qla24xx_abort_command(scsi_qla_host_t *vha, srb_t *sp, struct req_que *req)
+qla24xx_abort_command(srb_t *sp)
{
int rval;
- fc_port_t *fcport;
unsigned long flags = 0;
struct abort_entry_24xx *abt;
dma_addr_t abt_dma;
uint32_t handle;
+ fc_port_t *fcport = sp->fcport;
+ struct scsi_qla_host *vha = fcport->vha;
struct qla_hw_data *ha = vha->hw;
+ struct req_que *req = vha->req;
DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
- fcport = sp->fcport;
-
spin_lock_irqsave(&ha->hardware_lock, flags);
for (handle = 1; handle < MAX_OUTSTANDING_COMMANDS; handle++) {
if (req->outstanding_cmds[handle] == sp)
@@ -2231,6 +2262,7 @@
abt->entry_type = ABORT_IOCB_TYPE;
abt->entry_count = 1;
+ abt->handle = MAKE_HANDLE(req->id, abt->handle);
abt->nport_handle = cpu_to_le16(fcport->loop_id);
abt->handle_to_abort = handle;
abt->port_id[0] = fcport->d_id.b.al_pa;
@@ -2272,7 +2304,7 @@
static int
__qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
- unsigned int l)
+ unsigned int l, int tag)
{
int rval, rval2;
struct tsk_mgmt_cmd *tsk;
@@ -2286,8 +2318,11 @@
vha = fcport->vha;
ha = vha->hw;
- req = ha->req_q_map[0];
- rsp = ha->rsp_q_map[0];
+ req = vha->req;
+ if (ql2xmultique_tag)
+ rsp = ha->rsp_q_map[tag + 1];
+ else
+ rsp = req->rsp;
tsk = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &tsk_dma);
if (tsk == NULL) {
DEBUG2_3(printk("%s(%ld): failed to allocate Task Management "
@@ -2298,6 +2333,7 @@
tsk->p.tsk.entry_type = TSK_MGMT_IOCB_TYPE;
tsk->p.tsk.entry_count = 1;
+ tsk->p.tsk.handle = MAKE_HANDLE(req->id, tsk->p.tsk.handle);
tsk->p.tsk.nport_handle = cpu_to_le16(fcport->loop_id);
tsk->p.tsk.timeout = cpu_to_le16(ha->r_a_tov / 10 * 2);
tsk->p.tsk.control_flags = cpu_to_le32(type);
@@ -2344,15 +2380,15 @@
}
int
-qla24xx_abort_target(struct fc_port *fcport, unsigned int l)
+qla24xx_abort_target(struct fc_port *fcport, unsigned int l, int tag)
{
- return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l);
+ return __qla24xx_issue_tmf("Target", TCF_TARGET_RESET, fcport, l, tag);
}
int
-qla24xx_lun_reset(struct fc_port *fcport, unsigned int l)
+qla24xx_lun_reset(struct fc_port *fcport, unsigned int l, int tag)
{
- return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
+ return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l, tag);
}
int
@@ -2446,6 +2482,8 @@
if (rval != QLA_SUCCESS) {
DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
vha->host_no, rval));
+ if (mcp->mb[0] == MBS_INVALID_COMMAND)
+ rval = QLA_INVALID_COMMAND;
} else {
DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
}
@@ -2717,8 +2755,11 @@
if (vp_idx == 0)
return;
- if (MSB(stat) == 1)
+ if (MSB(stat) == 1) {
+ DEBUG2(printk("scsi(%ld): Could not acquire ID for "
+ "VP[%d].\n", vha->host_no, vp_idx));
return;
+ }
list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
if (vp_idx == vp->vp_idx)
@@ -3141,6 +3182,8 @@
WRT_REG_DWORD(®->req_q_in, 0);
WRT_REG_DWORD(®->req_q_out, 0);
}
+ req->req_q_in = ®->req_q_in;
+ req->req_q_out = ®->req_q_out;
spin_unlock_irqrestore(&ha->hardware_lock, flags);
rval = qla2x00_mailbox_command(vha, mcp);
@@ -3167,7 +3210,6 @@
mcp->mb[6] = MSW(MSD(rsp->dma));
mcp->mb[7] = LSW(MSD(rsp->dma));
mcp->mb[5] = rsp->length;
- mcp->mb[11] = rsp->vp_idx;
mcp->mb[14] = rsp->msix->entry;
mcp->mb[13] = rsp->rid;
@@ -3179,7 +3221,7 @@
mcp->mb[8] = 0;
/* que out ptr index */
mcp->mb[9] = 0;
- mcp->out_mb = MBX_14|MBX_13|MBX_12|MBX_11|MBX_10|MBX_9|MBX_8|MBX_7
+ mcp->out_mb = MBX_14|MBX_13|MBX_9|MBX_8|MBX_7
|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
mcp->in_mb = MBX_0;
mcp->flags = MBX_DMA_OUT;
@@ -3384,7 +3426,7 @@
DEBUG2_3_11(printk("%s(%ld): failed=%x (%x).\n", __func__,
vha->host_no, rval, mcp->mb[0]));
} else {
- DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
}
return rval;
@@ -3428,3 +3470,141 @@
return rval;
}
+
+int
+qla2x00_get_xgmac_stats(scsi_qla_host_t *vha, dma_addr_t stats_dma,
+ uint16_t size_in_bytes, uint16_t *actual_size)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA81XX(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_GET_XGMAC_STATS;
+ mcp->mb[2] = MSW(stats_dma);
+ mcp->mb[3] = LSW(stats_dma);
+ mcp->mb[6] = MSW(MSD(stats_dma));
+ mcp->mb[7] = LSW(MSD(stats_dma));
+ mcp->mb[8] = size_in_bytes >> 2;
+ mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_0;
+ mcp->in_mb = MBX_2|MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+ "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+ mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+
+ *actual_size = mcp->mb[2] << 2;
+ }
+
+ return rval;
+}
+
+int
+qla2x00_get_dcbx_params(scsi_qla_host_t *vha, dma_addr_t tlv_dma,
+ uint16_t size)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA81XX(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_GET_DCBX_PARAMS;
+ mcp->mb[1] = 0;
+ mcp->mb[2] = MSW(tlv_dma);
+ mcp->mb[3] = LSW(tlv_dma);
+ mcp->mb[6] = MSW(MSD(tlv_dma));
+ mcp->mb[7] = LSW(MSD(tlv_dma));
+ mcp->mb[8] = size;
+ mcp->out_mb = MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_2|MBX_1|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=0x%x "
+ "mb[1]=0x%x mb[2]=0x%x.\n", __func__, vha->host_no, rval,
+ mcp->mb[0], mcp->mb[1], mcp->mb[2]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+ }
+
+ return rval;
+}
+
+int
+qla2x00_read_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t *data)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_FWI2_CAPABLE(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_READ_RAM_EXTENDED;
+ mcp->mb[1] = LSW(risc_addr);
+ mcp->mb[8] = MSW(risc_addr);
+ mcp->out_mb = MBX_8|MBX_1|MBX_0;
+ mcp->in_mb = MBX_3|MBX_2|MBX_0;
+ mcp->tov = 30;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+ *data = mcp->mb[3] << 16 | mcp->mb[2];
+ }
+
+ return rval;
+}
+
+int
+qla2x00_write_ram_word(scsi_qla_host_t *vha, uint32_t risc_addr, uint32_t data)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_FWI2_CAPABLE(vha->hw))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
+
+ mcp->mb[0] = MBC_WRITE_RAM_WORD_EXTENDED;
+ mcp->mb[1] = LSW(risc_addr);
+ mcp->mb[2] = LSW(data);
+ mcp->mb[3] = MSW(data);
+ mcp->mb[8] = MSW(risc_addr);
+ mcp->out_mb = MBX_8|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_0;
+ mcp->tov = 30;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x mb[0]=%x.\n", __func__,
+ vha->host_no, rval, mcp->mb[0]));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, vha->host_no));
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 51716c7..650bcef 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -398,9 +398,8 @@
qla2x00_start_timer(vha, qla2x00_timer, WATCH_INTERVAL);
- memset(vha->req_ques, 0, sizeof(vha->req_ques));
- vha->req_ques[0] = ha->req_q_map[0]->id;
- host->can_queue = ha->req_q_map[0]->length + 128;
+ vha->req = base_vha->req;
+ host->can_queue = base_vha->req->length + 128;
host->this_id = 255;
host->cmd_per_lun = 3;
host->max_cmd_len = MAX_CMDSZ;
@@ -515,76 +514,53 @@
/* Delete all queues for a given vhost */
int
-qla25xx_delete_queues(struct scsi_qla_host *vha, uint8_t que_no)
+qla25xx_delete_queues(struct scsi_qla_host *vha)
{
int cnt, ret = 0;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
struct qla_hw_data *ha = vha->hw;
- if (que_no) {
- /* Delete request queue */
- req = ha->req_q_map[que_no];
+ /* Delete request queues */
+ for (cnt = 1; cnt < ha->max_req_queues; cnt++) {
+ req = ha->req_q_map[cnt];
if (req) {
- rsp = req->rsp;
ret = qla25xx_delete_req_que(vha, req);
if (ret != QLA_SUCCESS) {
qla_printk(KERN_WARNING, ha,
- "Couldn't delete req que %d\n", req->id);
+ "Couldn't delete req que %d\n",
+ req->id);
return ret;
}
- /* Delete associated response queue */
- if (rsp) {
- ret = qla25xx_delete_rsp_que(vha, rsp);
- if (ret != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Couldn't delete rsp que %d\n",
- rsp->id);
- return ret;
- }
- }
- }
- } else { /* delete all queues of this host */
- for (cnt = 0; cnt < QLA_MAX_HOST_QUES; cnt++) {
- /* Delete request queues */
- req = ha->req_q_map[vha->req_ques[cnt]];
- if (req && req->id) {
- rsp = req->rsp;
- ret = qla25xx_delete_req_que(vha, req);
- if (ret != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Couldn't delete req que %d\n",
- vha->req_ques[cnt]);
- return ret;
- }
- vha->req_ques[cnt] = ha->req_q_map[0]->id;
- /* Delete associated response queue */
- if (rsp && rsp->id) {
- ret = qla25xx_delete_rsp_que(vha, rsp);
- if (ret != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Couldn't delete rsp que %d\n",
- rsp->id);
- return ret;
- }
- }
- }
}
}
- qla_printk(KERN_INFO, ha, "Queues deleted for vport:%d\n",
- vha->vp_idx);
+
+ /* Delete response queues */
+ for (cnt = 1; cnt < ha->max_rsp_queues; cnt++) {
+ rsp = ha->rsp_q_map[cnt];
+ if (rsp) {
+ ret = qla25xx_delete_rsp_que(vha, rsp);
+ if (ret != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Couldn't delete rsp que %d\n",
+ rsp->id);
+ return ret;
+ }
+ }
+ }
return ret;
}
int
qla25xx_create_req_que(struct qla_hw_data *ha, uint16_t options,
- uint8_t vp_idx, uint16_t rid, uint8_t rsp_que, uint8_t qos)
+ uint8_t vp_idx, uint16_t rid, int rsp_que, uint8_t qos)
{
int ret = 0;
struct req_que *req = NULL;
struct scsi_qla_host *base_vha = pci_get_drvdata(ha->pdev);
uint16_t que_id = 0;
device_reg_t __iomem *reg;
+ uint32_t cnt;
req = kzalloc(sizeof(struct req_que), GFP_KERNEL);
if (req == NULL) {
@@ -604,8 +580,8 @@
}
mutex_lock(&ha->vport_lock);
- que_id = find_first_zero_bit(ha->req_qid_map, ha->max_queues);
- if (que_id >= ha->max_queues) {
+ que_id = find_first_zero_bit(ha->req_qid_map, ha->max_req_queues);
+ if (que_id >= ha->max_req_queues) {
mutex_unlock(&ha->vport_lock);
qla_printk(KERN_INFO, ha, "No resources to create "
"additional request queue\n");
@@ -617,10 +593,10 @@
req->vp_idx = vp_idx;
req->qos = qos;
- if (ha->rsp_q_map[rsp_que]) {
+ if (rsp_que < 0)
+ req->rsp = NULL;
+ else
req->rsp = ha->rsp_q_map[rsp_que];
- req->rsp->req = req;
- }
/* Use alternate PCI bus number */
if (MSB(req->rid))
options |= BIT_4;
@@ -628,13 +604,16 @@
if (LSB(req->rid))
options |= BIT_5;
req->options = options;
+
+ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++)
+ req->outstanding_cmds[cnt] = NULL;
+ req->current_outstanding_cmd = 1;
+
req->ring_ptr = req->ring;
req->ring_index = 0;
req->cnt = req->length;
req->id = que_id;
reg = ISP_QUE_REG(ha, que_id);
- req->req_q_in = ®->isp25mq.req_q_in;
- req->req_q_out = ®->isp25mq.req_q_out;
req->max_q_depth = ha->req_q_map[0]->max_q_depth;
mutex_unlock(&ha->vport_lock);
@@ -654,10 +633,19 @@
return 0;
}
+static void qla_do_work(struct work_struct *work)
+{
+ struct rsp_que *rsp = container_of(work, struct rsp_que, q_work);
+ struct scsi_qla_host *vha;
+
+ vha = qla25xx_get_host(rsp);
+ qla24xx_process_response_queue(vha, rsp);
+}
+
/* create response queue */
int
qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
- uint8_t vp_idx, uint16_t rid)
+ uint8_t vp_idx, uint16_t rid, int req)
{
int ret = 0;
struct rsp_que *rsp = NULL;
@@ -672,7 +660,7 @@
goto que_failed;
}
- rsp->length = RESPONSE_ENTRY_CNT_2300;
+ rsp->length = RESPONSE_ENTRY_CNT_MQ;
rsp->ring = dma_alloc_coherent(&ha->pdev->dev,
(rsp->length + 1) * sizeof(response_t),
&rsp->dma, GFP_KERNEL);
@@ -683,8 +671,8 @@
}
mutex_lock(&ha->vport_lock);
- que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_queues);
- if (que_id >= ha->max_queues) {
+ que_id = find_first_zero_bit(ha->rsp_qid_map, ha->max_rsp_queues);
+ if (que_id >= ha->max_rsp_queues) {
mutex_unlock(&ha->vport_lock);
qla_printk(KERN_INFO, ha, "No resources to create "
"additional response queue\n");
@@ -708,8 +696,6 @@
if (LSB(rsp->rid))
options |= BIT_5;
rsp->options = options;
- rsp->ring_ptr = rsp->ring;
- rsp->ring_index = 0;
rsp->id = que_id;
reg = ISP_QUE_REG(ha, que_id);
rsp->rsp_q_in = ®->isp25mq.rsp_q_in;
@@ -728,9 +714,14 @@
mutex_unlock(&ha->vport_lock);
goto que_failed;
}
+ if (req >= 0)
+ rsp->req = ha->req_q_map[req];
+ else
+ rsp->req = NULL;
qla2x00_init_response_q_entries(rsp);
-
+ if (rsp->hw->wq)
+ INIT_WORK(&rsp->q_work, qla_do_work);
return rsp->id;
que_failed:
@@ -744,14 +735,16 @@
uint16_t options = 0;
uint8_t ret = 0;
struct qla_hw_data *ha = vha->hw;
+ struct rsp_que *rsp;
options |= BIT_1;
- ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0);
+ ret = qla25xx_create_rsp_que(ha, options, vha->vp_idx, 0, -1);
if (!ret) {
qla_printk(KERN_WARNING, ha, "Response Que create failed\n");
return ret;
} else
qla_printk(KERN_INFO, ha, "Response Que:%d created.\n", ret);
+ rsp = ha->rsp_q_map[ret];
options = 0;
if (qos & BIT_7)
@@ -759,10 +752,11 @@
ret = qla25xx_create_req_que(ha, options, vha->vp_idx, 0, ret,
qos & ~BIT_7);
if (ret) {
- vha->req_ques[0] = ret;
+ vha->req = ha->req_q_map[ret];
qla_printk(KERN_INFO, ha, "Request Que:%d created.\n", ret);
} else
qla_printk(KERN_WARNING, ha, "Request Que create failed\n");
+ rsp->req = ha->req_q_map[ret];
return ret;
}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e4fdcda..dcf0116 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -77,6 +77,14 @@
MODULE_PARM_DESC(ql2xmaxqdepth,
"Maximum queue depth to report for target devices.");
+int ql2xqfulltracking = 1;
+module_param(ql2xqfulltracking, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xqfulltracking,
+ "Controls whether the driver tracks queue full status "
+ "returns and dynamically adjusts a scsi device's queue "
+ "depth. Default is 1, perform tracking. Set to 0 to "
+ "disable dynamic tracking and adjustment of queue depth.");
+
int ql2xqfullrampup = 120;
module_param(ql2xqfullrampup, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(ql2xqfullrampup,
@@ -96,6 +104,23 @@
"Enables MQ settings "
"Default is 1 for single queue. Set it to number \
of queues in MQ mode.");
+
+int ql2xmultique_tag;
+module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xmultique_tag,
+ "Enables CPU affinity settings for the driver "
+ "Default is 0 for no affinity of request and response IO. "
+ "Set it to 1 to turn on the cpu affinity.");
+
+int ql2xfwloadbin;
+module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfwloadbin,
+ "Option to specify location from which to load ISP firmware:\n"
+ " 2 -- load firmware via the request_firmware() (hotplug)\n"
+ " interface.\n"
+ " 1 -- load firmware from flash.\n"
+ " 0 -- use default semantics.\n");
+
/*
* SCSI host template entry points
*/
@@ -187,7 +212,7 @@
/* -------------------------------------------------------------------------- */
static int qla2x00_alloc_queues(struct qla_hw_data *ha)
{
- ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_queues,
+ ha->req_q_map = kzalloc(sizeof(struct req_que *) * ha->max_req_queues,
GFP_KERNEL);
if (!ha->req_q_map) {
qla_printk(KERN_WARNING, ha,
@@ -195,7 +220,7 @@
goto fail_req_map;
}
- ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_queues,
+ ha->rsp_q_map = kzalloc(sizeof(struct rsp_que *) * ha->max_rsp_queues,
GFP_KERNEL);
if (!ha->rsp_q_map) {
qla_printk(KERN_WARNING, ha,
@@ -213,16 +238,8 @@
return -ENOMEM;
}
-static void qla2x00_free_que(struct qla_hw_data *ha, struct req_que *req,
- struct rsp_que *rsp)
+static void qla2x00_free_req_que(struct qla_hw_data *ha, struct req_que *req)
{
- if (rsp && rsp->ring)
- dma_free_coherent(&ha->pdev->dev,
- (rsp->length + 1) * sizeof(response_t),
- rsp->ring, rsp->dma);
-
- kfree(rsp);
- rsp = NULL;
if (req && req->ring)
dma_free_coherent(&ha->pdev->dev,
(req->length + 1) * sizeof(request_t),
@@ -232,22 +249,77 @@
req = NULL;
}
+static void qla2x00_free_rsp_que(struct qla_hw_data *ha, struct rsp_que *rsp)
+{
+ if (rsp && rsp->ring)
+ dma_free_coherent(&ha->pdev->dev,
+ (rsp->length + 1) * sizeof(response_t),
+ rsp->ring, rsp->dma);
+
+ kfree(rsp);
+ rsp = NULL;
+}
+
static void qla2x00_free_queues(struct qla_hw_data *ha)
{
struct req_que *req;
struct rsp_que *rsp;
int cnt;
- for (cnt = 0; cnt < ha->max_queues; cnt++) {
- rsp = ha->rsp_q_map[cnt];
+ for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
req = ha->req_q_map[cnt];
- qla2x00_free_que(ha, req, rsp);
+ qla2x00_free_req_que(ha, req);
+ }
+ kfree(ha->req_q_map);
+ ha->req_q_map = NULL;
+
+ for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
+ rsp = ha->rsp_q_map[cnt];
+ qla2x00_free_rsp_que(ha, rsp);
}
kfree(ha->rsp_q_map);
ha->rsp_q_map = NULL;
+}
- kfree(ha->req_q_map);
- ha->req_q_map = NULL;
+static int qla25xx_setup_mode(struct scsi_qla_host *vha)
+{
+ uint16_t options = 0;
+ int ques, req, ret;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (ql2xmultique_tag) {
+ /* CPU affinity mode */
+ ha->wq = create_workqueue("qla2xxx_wq");
+ /* create a request queue for IO */
+ options |= BIT_7;
+ req = qla25xx_create_req_que(ha, options, 0, 0, -1,
+ QLA_DEFAULT_QUE_QOS);
+ if (!req) {
+ qla_printk(KERN_WARNING, ha,
+ "Can't create request queue\n");
+ goto fail;
+ }
+ vha->req = ha->req_q_map[req];
+ options |= BIT_1;
+ for (ques = 1; ques < ha->max_rsp_queues; ques++) {
+ ret = qla25xx_create_rsp_que(ha, options, 0, 0, req);
+ if (!ret) {
+ qla_printk(KERN_WARNING, ha,
+ "Response Queue create failed\n");
+ goto fail2;
+ }
+ }
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "CPU affinity mode enabled, no. of response"
+ " queues:%d, no. of request queues:%d\n",
+ ha->max_rsp_queues, ha->max_req_queues));
+ }
+ return 0;
+fail2:
+ qla25xx_delete_queues(vha);
+fail:
+ ha->mqenable = 0;
+ return 1;
}
static char *
@@ -387,7 +459,6 @@
sp->fcport = fcport;
sp->cmd = cmd;
- sp->que = ha->req_q_map[0];
sp->flags = 0;
CMD_SP(cmd) = (void *)sp;
cmd->scsi_done = done;
@@ -612,7 +683,7 @@
void
qla2x00_abort_fcport_cmds(fc_port_t *fcport)
{
- int cnt, que, id;
+ int cnt;
unsigned long flags;
srb_t *sp;
scsi_qla_host_t *vha = fcport->vha;
@@ -620,32 +691,27 @@
struct req_que *req;
spin_lock_irqsave(&ha->hardware_lock, flags);
- for (que = 0; que < QLA_MAX_HOST_QUES; que++) {
- id = vha->req_ques[que];
- req = ha->req_q_map[id];
- if (!req)
+ req = vha->req;
+ for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+ sp = req->outstanding_cmds[cnt];
+ if (!sp)
continue;
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- sp = req->outstanding_cmds[cnt];
- if (!sp)
- continue;
- if (sp->fcport != fcport)
- continue;
+ if (sp->fcport != fcport)
+ continue;
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (ha->isp_ops->abort_command(vha, sp, req)) {
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ if (ha->isp_ops->abort_command(sp)) {
+ DEBUG2(qla_printk(KERN_WARNING, ha,
+ "Abort failed -- %lx\n",
+ sp->cmd->serial_number));
+ } else {
+ if (qla2x00_eh_wait_on_command(sp->cmd) !=
+ QLA_SUCCESS)
DEBUG2(qla_printk(KERN_WARNING, ha,
- "Abort failed -- %lx\n",
+ "Abort failed while waiting -- %lx\n",
sp->cmd->serial_number));
- } else {
- if (qla2x00_eh_wait_on_command(sp->cmd) !=
- QLA_SUCCESS)
- DEBUG2(qla_printk(KERN_WARNING, ha,
- "Abort failed while waiting -- %lx\n",
- sp->cmd->serial_number));
- }
- spin_lock_irqsave(&ha->hardware_lock, flags);
}
+ spin_lock_irqsave(&ha->hardware_lock, flags);
}
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
@@ -693,7 +759,7 @@
unsigned long flags;
int wait = 0;
struct qla_hw_data *ha = vha->hw;
- struct req_que *req;
+ struct req_que *req = vha->req;
srb_t *spt;
qla2x00_block_error_handler(cmd);
@@ -709,7 +775,6 @@
spt = (srb_t *) CMD_SP(cmd);
if (!spt)
return SUCCESS;
- req = spt->que;
/* Check active list for command command. */
spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -726,7 +791,7 @@
" pid=%ld.\n", __func__, vha->host_no, sp, serial));
spin_unlock_irqrestore(&ha->hardware_lock, flags);
- if (ha->isp_ops->abort_command(vha, sp, req)) {
+ if (ha->isp_ops->abort_command(sp)) {
DEBUG2(printk("%s(%ld): abort_command "
"mbx failed.\n", __func__, vha->host_no));
ret = FAILED;
@@ -777,7 +842,7 @@
return status;
spin_lock_irqsave(&ha->hardware_lock, flags);
- req = sp->que;
+ req = vha->req;
for (cnt = 1; status == QLA_SUCCESS &&
cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
sp = req->outstanding_cmds[cnt];
@@ -820,7 +885,7 @@
static int
__qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
- struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int))
+ struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int, int))
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
@@ -841,7 +906,8 @@
if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS)
goto eh_reset_failed;
err = 2;
- if (do_reset(fcport, cmd->device->lun) != QLA_SUCCESS)
+ if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1)
+ != QLA_SUCCESS)
goto eh_reset_failed;
err = 3;
if (qla2x00_eh_wait_for_pending_commands(vha, cmd->device->id,
@@ -996,6 +1062,9 @@
if (qla2x00_vp_abort_isp(vha))
goto eh_host_reset_lock;
} else {
+ if (ha->wq)
+ flush_workqueue(ha->wq);
+
set_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
if (qla2x00_abort_isp(base_vha)) {
clear_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
@@ -1037,7 +1106,8 @@
struct fc_port *fcport;
struct qla_hw_data *ha = vha->hw;
- if (ha->flags.enable_lip_full_login && !vha->vp_idx) {
+ if (ha->flags.enable_lip_full_login && !vha->vp_idx &&
+ !IS_QLA81XX(ha)) {
ret = qla2x00_full_login_lip(vha);
if (ret != QLA_SUCCESS) {
DEBUG2_3(printk("%s(%ld): failed: "
@@ -1064,7 +1134,7 @@
if (fcport->port_type != FCT_TARGET)
continue;
- ret = ha->isp_ops->target_reset(fcport, 0);
+ ret = ha->isp_ops->target_reset(fcport, 0, 0);
if (ret != QLA_SUCCESS) {
DEBUG2_3(printk("%s(%ld): bus_reset failed: "
"target_reset=%d d_id=%x.\n", __func__,
@@ -1088,7 +1158,7 @@
struct req_que *req;
spin_lock_irqsave(&ha->hardware_lock, flags);
- for (que = 0; que < ha->max_queues; que++) {
+ for (que = 0; que < ha->max_req_queues; que++) {
req = ha->req_q_map[que];
if (!req)
continue;
@@ -1123,7 +1193,7 @@
scsi_qla_host_t *vha = shost_priv(sdev->host);
struct qla_hw_data *ha = vha->hw;
struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
- struct req_que *req = ha->req_q_map[vha->req_ques[0]];
+ struct req_que *req = vha->req;
if (sdev->tagged_supported)
scsi_activate_tcq(sdev, req->max_q_depth);
@@ -1511,6 +1581,13 @@
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
}
+
+ /* Get adapter physical port no from interrupt pin register. */
+ pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
+ if (ha->port_no & 1)
+ ha->flags.port0 = 1;
+ else
+ ha->flags.port0 = 0;
}
static int
@@ -1518,6 +1595,7 @@
{
resource_size_t pio;
uint16_t msix;
+ int cpus;
if (pci_request_selected_regions(ha->pdev, ha->bars,
QLA2XXX_DRIVER_NAME)) {
@@ -1571,8 +1649,9 @@
}
/* Determine queue resources */
- ha->max_queues = 1;
- if (ql2xmaxqueues <= 1 || (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
+ ha->max_req_queues = ha->max_rsp_queues = 1;
+ if ((ql2xmaxqueues <= 1 || ql2xmultique_tag < 1) &&
+ (!IS_QLA25XX(ha) && !IS_QLA81XX(ha)))
goto mqiobase_exit;
ha->mqiobase = ioremap(pci_resource_start(ha->pdev, 3),
pci_resource_len(ha->pdev, 3));
@@ -1582,18 +1661,24 @@
ha->msix_count = msix;
/* Max queues are bounded by available msix vectors */
/* queue 0 uses two msix vectors */
- if (ha->msix_count - 1 < ql2xmaxqueues)
- ha->max_queues = ha->msix_count - 1;
- else if (ql2xmaxqueues > QLA_MQ_SIZE)
- ha->max_queues = QLA_MQ_SIZE;
- else
- ha->max_queues = ql2xmaxqueues;
+ if (ql2xmultique_tag) {
+ cpus = num_online_cpus();
+ ha->max_rsp_queues = (ha->msix_count - 1 - cpus) ?
+ (cpus + 1) : (ha->msix_count - 1);
+ ha->max_req_queues = 2;
+ } else if (ql2xmaxqueues > 1) {
+ ha->max_req_queues = ql2xmaxqueues > QLA_MQ_SIZE ?
+ QLA_MQ_SIZE : ql2xmaxqueues;
+ DEBUG2(qla_printk(KERN_INFO, ha, "QoS mode set, max no"
+ " of request queues:%d\n", ha->max_req_queues));
+ }
qla_printk(KERN_INFO, ha,
"MSI-X vector count: %d\n", msix);
- }
+ } else
+ qla_printk(KERN_INFO, ha, "BAR 3 not enabled\n");
mqiobase_exit:
- ha->msix_count = ha->max_queues + 1;
+ ha->msix_count = ha->max_rsp_queues + 1;
return (0);
iospace_error_exit:
@@ -1605,6 +1690,9 @@
{
scsi_qla_host_t *vha = shost_priv(shost);
+ if (vha->hw->flags.running_gold_fw)
+ return;
+
set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
set_bit(RSCN_UPDATE, &vha->dpc_flags);
@@ -1768,6 +1856,7 @@
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_81XX;
+ ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla81xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF_81XX;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA_81XX;
@@ -1803,14 +1892,15 @@
ret = -ENOMEM;
qla2x00_mem_free(ha);
- qla2x00_free_que(ha, req, rsp);
+ qla2x00_free_req_que(ha, req);
+ qla2x00_free_rsp_que(ha, rsp);
goto probe_hw_failed;
}
pci_set_drvdata(pdev, base_vha);
host = base_vha->host;
- base_vha->req_ques[0] = req->id;
+ base_vha->req = req;
host->can_queue = req->length + 128;
if (IS_QLA2XXX_MIDTYPE(ha))
base_vha->mgmt_svr_loop_id = 10 + base_vha->vp_idx;
@@ -1841,7 +1931,10 @@
}
ha->rsp_q_map[0] = rsp;
ha->req_q_map[0] = req;
-
+ rsp->req = req;
+ req->rsp = rsp;
+ set_bit(0, ha->req_qid_map);
+ set_bit(0, ha->rsp_qid_map);
/* FWI2-capable only. */
req->req_q_in = &ha->iobase->isp24.req_q_in;
req->req_q_out = &ha->iobase->isp24.req_q_out;
@@ -1866,6 +1959,15 @@
goto probe_failed;
}
+ if (ha->mqenable)
+ if (qla25xx_setup_mode(base_vha))
+ qla_printk(KERN_WARNING, ha,
+ "Can't create queues, falling back to single"
+ " queue mode\n");
+
+ if (ha->flags.running_gold_fw)
+ goto skip_dpc;
+
/*
* Startup the kernel thread for this host adapter
*/
@@ -1878,6 +1980,7 @@
goto probe_failed;
}
+skip_dpc:
list_add_tail(&base_vha->list, &ha->vp_list);
base_vha->host->irq = ha->pdev->irq;
@@ -1917,8 +2020,9 @@
return 0;
probe_init_failed:
- qla2x00_free_que(ha, req, rsp);
- ha->max_queues = 0;
+ qla2x00_free_req_que(ha, req);
+ qla2x00_free_rsp_que(ha, rsp);
+ ha->max_req_queues = ha->max_rsp_queues = 0;
probe_failed:
if (base_vha->timer_active)
@@ -1976,6 +2080,13 @@
base_vha->flags.online = 0;
+ /* Flush the work queue and remove it */
+ if (ha->wq) {
+ flush_workqueue(ha->wq);
+ destroy_workqueue(ha->wq);
+ ha->wq = NULL;
+ }
+
/* Kill the kernel thread for this host */
if (ha->dpc_thread) {
struct task_struct *t = ha->dpc_thread;
@@ -2017,6 +2128,8 @@
{
struct qla_hw_data *ha = vha->hw;
+ qla25xx_delete_queues(vha);
+
if (ha->flags.fce_enabled)
qla2x00_disable_fce_trace(vha, NULL, NULL);
@@ -2329,6 +2442,14 @@
vfree(ha->fw_dump);
}
+ if (ha->dcbx_tlv)
+ dma_free_coherent(&ha->pdev->dev, DCBX_TLV_DATA_SIZE,
+ ha->dcbx_tlv, ha->dcbx_tlv_dma);
+
+ if (ha->xgmac_data)
+ dma_free_coherent(&ha->pdev->dev, XGMAC_DATA_SIZE,
+ ha->xgmac_data, ha->xgmac_data_dma);
+
if (ha->sns_cmd)
dma_free_coherent(&ha->pdev->dev, sizeof(struct sns_cmd_pkt),
ha->sns_cmd, ha->sns_cmd_dma);
@@ -2412,6 +2533,8 @@
INIT_LIST_HEAD(&vha->work_list);
INIT_LIST_HEAD(&vha->list);
+ spin_lock_init(&vha->work_lock);
+
sprintf(vha->host_str, "%s_%ld", QLA2XXX_DRIVER_NAME, vha->host_no);
return vha;
@@ -2420,13 +2543,11 @@
}
static struct qla_work_evt *
-qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type,
- int locked)
+qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
{
struct qla_work_evt *e;
- e = kzalloc(sizeof(struct qla_work_evt), locked ? GFP_ATOMIC:
- GFP_KERNEL);
+ e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
if (!e)
return NULL;
@@ -2437,17 +2558,15 @@
}
static int
-qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e, int locked)
+qla2x00_post_work(struct scsi_qla_host *vha, struct qla_work_evt *e)
{
- unsigned long uninitialized_var(flags);
- struct qla_hw_data *ha = vha->hw;
+ unsigned long flags;
- if (!locked)
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ spin_lock_irqsave(&vha->work_lock, flags);
list_add_tail(&e->list, &vha->work_list);
+ spin_unlock_irqrestore(&vha->work_lock, flags);
qla2xxx_wake_dpc(vha);
- if (!locked)
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
return QLA_SUCCESS;
}
@@ -2457,13 +2576,13 @@
{
struct qla_work_evt *e;
- e = qla2x00_alloc_work(vha, QLA_EVT_AEN, 1);
+ e = qla2x00_alloc_work(vha, QLA_EVT_AEN);
if (!e)
return QLA_FUNCTION_FAILED;
e->u.aen.code = code;
e->u.aen.data = data;
- return qla2x00_post_work(vha, e, 1);
+ return qla2x00_post_work(vha, e);
}
int
@@ -2471,25 +2590,27 @@
{
struct qla_work_evt *e;
- e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK, 1);
+ e = qla2x00_alloc_work(vha, QLA_EVT_IDC_ACK);
if (!e)
return QLA_FUNCTION_FAILED;
memcpy(e->u.idc_ack.mb, mb, QLA_IDC_ACK_REGS * sizeof(uint16_t));
- return qla2x00_post_work(vha, e, 1);
+ return qla2x00_post_work(vha, e);
}
static void
qla2x00_do_work(struct scsi_qla_host *vha)
{
- struct qla_work_evt *e;
- struct qla_hw_data *ha = vha->hw;
+ struct qla_work_evt *e, *tmp;
+ unsigned long flags;
+ LIST_HEAD(work);
- spin_lock_irq(&ha->hardware_lock);
- while (!list_empty(&vha->work_list)) {
- e = list_entry(vha->work_list.next, struct qla_work_evt, list);
+ spin_lock_irqsave(&vha->work_lock, flags);
+ list_splice_init(&vha->work_list, &work);
+ spin_unlock_irqrestore(&vha->work_lock, flags);
+
+ list_for_each_entry_safe(e, tmp, &work, list) {
list_del_init(&e->list);
- spin_unlock_irq(&ha->hardware_lock);
switch (e->type) {
case QLA_EVT_AEN:
@@ -2502,10 +2623,9 @@
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
- spin_lock_irq(&ha->hardware_lock);
}
- spin_unlock_irq(&ha->hardware_lock);
}
+
/* Relogins all the fcports of a vport
* Context: dpc thread
*/
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 152ecfc..6260505 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -219,8 +219,8 @@
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(printk("%s(%ld): NVRAM didn't go ready...\n",
- __func__, vha->host_no));
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
+ "NVRAM didn't go ready...\n"));
break;
}
NVRAM_DELAY();
@@ -349,7 +349,7 @@
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(qla_printk(
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
"NVRAM didn't go ready...\n"));
break;
}
@@ -408,7 +408,8 @@
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(qla_printk("NVRAM didn't go ready...\n"));
+ DEBUG9_10(qla_printk(KERN_WARNING, ha,
+ "NVRAM didn't go ready...\n"));
break;
}
NVRAM_DELAY();
@@ -701,32 +702,35 @@
break;
case FLT_REG_VPD_0:
ha->flt_region_vpd_nvram = start;
- if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+ if (ha->flags.port0)
ha->flt_region_vpd = start;
break;
case FLT_REG_VPD_1:
- if (PCI_FUNC(ha->pdev->devfn) & 1)
+ if (!ha->flags.port0)
ha->flt_region_vpd = start;
break;
case FLT_REG_NVRAM_0:
- if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+ if (ha->flags.port0)
ha->flt_region_nvram = start;
break;
case FLT_REG_NVRAM_1:
- if (PCI_FUNC(ha->pdev->devfn) & 1)
+ if (!ha->flags.port0)
ha->flt_region_nvram = start;
break;
case FLT_REG_FDT:
ha->flt_region_fdt = start;
break;
case FLT_REG_NPIV_CONF_0:
- if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+ if (ha->flags.port0)
ha->flt_region_npiv_conf = start;
break;
case FLT_REG_NPIV_CONF_1:
- if (PCI_FUNC(ha->pdev->devfn) & 1)
+ if (!ha->flags.port0)
ha->flt_region_npiv_conf = start;
break;
+ case FLT_REG_GOLD_FW:
+ ha->flt_region_gold_fw = start;
+ break;
}
}
goto done;
@@ -744,12 +748,12 @@
ha->flt_region_fw = def_fw[def];
ha->flt_region_boot = def_boot[def];
ha->flt_region_vpd_nvram = def_vpd_nvram[def];
- ha->flt_region_vpd = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+ ha->flt_region_vpd = ha->flags.port0 ?
def_vpd0[def]: def_vpd1[def];
- ha->flt_region_nvram = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+ ha->flt_region_nvram = ha->flags.port0 ?
def_nvram0[def]: def_nvram1[def];
ha->flt_region_fdt = def_fdt[def];
- ha->flt_region_npiv_conf = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+ ha->flt_region_npiv_conf = ha->flags.port0 ?
def_npiv_conf0[def]: def_npiv_conf1[def];
done:
DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
@@ -924,6 +928,8 @@
struct fc_vport_identifiers vid;
struct fc_vport *vport;
+ memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
+
flags = le16_to_cpu(entry->flags);
if (flags == 0xffff)
continue;
@@ -937,9 +943,7 @@
vid.port_name = wwn_to_u64(entry->port_name);
vid.node_name = wwn_to_u64(entry->node_name);
- memcpy(&ha->npiv_info[i], entry, sizeof(struct qla_npiv_entry));
-
- DEBUG2(qla_printk(KERN_DEBUG, ha, "NPIV[%02x]: wwpn=%llx "
+ DEBUG2(qla_printk(KERN_INFO, ha, "NPIV[%02x]: wwpn=%llx "
"wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
vid.port_name, vid.node_name, le16_to_cpu(entry->vf_id),
entry->q_qos, entry->f_qos));
@@ -955,7 +959,6 @@
}
done:
kfree(data);
- ha->npiv_info = NULL;
}
static int
@@ -1079,8 +1082,9 @@
0xff0000) | ((fdata >> 16) & 0xff));
ret = qla24xx_erase_sector(vha, fdata);
if (ret != QLA_SUCCESS) {
- DEBUG9(qla_printk("Unable to erase sector: "
- "address=%x.\n", faddr));
+ DEBUG9(qla_printk(KERN_WARNING, ha,
+ "Unable to erase sector: address=%x.\n",
+ faddr));
break;
}
}
@@ -1240,8 +1244,9 @@
ret = qla24xx_write_flash_dword(ha,
nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
if (ret != QLA_SUCCESS) {
- DEBUG9(qla_printk("Unable to program nvram address=%x "
- "data=%x.\n", naddr, *dwptr));
+ DEBUG9(qla_printk(KERN_WARNING, ha,
+ "Unable to program nvram address=%x data=%x.\n",
+ naddr, *dwptr));
break;
}
}
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 19d1afc..b63feaf 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.01-k1"
+#define QLA2XXX_VERSION "8.03.01-k3"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 166417a..2de5f3a 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1225,8 +1225,8 @@
* @starget: SCSI target pointer
* @lun: SCSI Logical Unit Number
*
- * Description: Looks up the scsi_device with the specified @channel, @id, @lun
- * for a given host. The returned scsi_device has an additional reference that
+ * Description: Looks up the scsi_device with the specified @lun for a given
+ * @starget. The returned scsi_device has an additional reference that
* needs to be released with scsi_device_put once you're done with it.
**/
struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 213123b..41a2177 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -887,7 +887,7 @@
static sector_t get_sdebug_capacity(void)
{
if (scsi_debug_virtual_gb > 0)
- return 2048 * 1024 * scsi_debug_virtual_gb;
+ return 2048 * 1024 * (sector_t)scsi_debug_virtual_gb;
else
return sdebug_store_sectors;
}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 0c2c73b..a168935 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -641,9 +641,9 @@
/**
* scsi_eh_restore_cmnd - Restore a scsi command info as part of error recory
* @scmd: SCSI command structure to restore
- * @ses: saved information from a coresponding call to scsi_prep_eh_cmnd
+ * @ses: saved information from a coresponding call to scsi_eh_prep_cmnd
*
- * Undo any damage done by above scsi_prep_eh_cmnd().
+ * Undo any damage done by above scsi_eh_prep_cmnd().
*/
void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
{
@@ -1451,28 +1451,21 @@
* @sdev: SCSI device to prevent medium removal
*
* Locking:
- * We must be called from process context; scsi_allocate_request()
- * may sleep.
+ * We must be called from process context.
*
* Notes:
* We queue up an asynchronous "ALLOW MEDIUM REMOVAL" request on the
* head of the devices request queue, and continue.
- *
- * Bugs:
- * scsi_allocate_request() may sleep waiting for existing requests to
- * be processed. However, since we haven't kicked off any request
- * processing for this host, this may deadlock.
- *
- * If scsi_allocate_request() fails for what ever reason, we
- * completely forget to lock the door.
*/
static void scsi_eh_lock_door(struct scsi_device *sdev)
{
struct request *req;
+ /*
+ * blk_get_request with GFP_KERNEL (__GFP_WAIT) sleeps until a
+ * request becomes available
+ */
req = blk_get_request(sdev->request_queue, READ, GFP_KERNEL);
- if (!req)
- return;
req->cmd[0] = ALLOW_MEDIUM_REMOVAL;
req->cmd[1] = 0;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index dd3f9d2..30f3275 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2412,20 +2412,18 @@
scsi_internal_device_unblock(struct scsi_device *sdev)
{
struct request_queue *q = sdev->request_queue;
- int err;
unsigned long flags;
/*
* Try to transition the scsi device to SDEV_RUNNING
* and goose the device queue if successful.
*/
- err = scsi_device_set_state(sdev, SDEV_RUNNING);
- if (err) {
- err = scsi_device_set_state(sdev, SDEV_CREATED);
-
- if (err)
- return err;
- }
+ if (sdev->sdev_state == SDEV_BLOCK)
+ sdev->sdev_state = SDEV_RUNNING;
+ else if (sdev->sdev_state == SDEV_CREATED_BLOCK)
+ sdev->sdev_state = SDEV_CREATED;
+ else
+ return -EINVAL;
spin_lock_irqsave(q->queue_lock, flags);
blk_start_queue(q);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index e2b50d8..c447838 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -115,12 +115,12 @@
"REPORT LUNS maximum number of LUNS received (should be"
" between 1 and 16384)");
-static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3;
+static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ + 18;
module_param_named(inq_timeout, scsi_inq_timeout, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(inq_timeout,
"Timeout (in seconds) waiting for devices to answer INQUIRY."
- " Default is 5. Some non-compliant devices need more.");
+ " Default is 20. Some devices may need more; most need less.");
/* This lock protects only this list */
static DEFINE_SPINLOCK(async_scan_lock);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 0a2ce7b..f3e6646 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -37,7 +37,6 @@
#define ISCSI_TRANSPORT_VERSION "2.0-870"
struct iscsi_internal {
- int daemon_pid;
struct scsi_transport_template t;
struct iscsi_transport *iscsi_transport;
struct list_head list;
@@ -938,23 +937,9 @@
}
static int
-iscsi_broadcast_skb(struct sk_buff *skb, gfp_t gfp)
+iscsi_multicast_skb(struct sk_buff *skb, uint32_t group, gfp_t gfp)
{
- return netlink_broadcast(nls, skb, 0, 1, gfp);
-}
-
-static int
-iscsi_unicast_skb(struct sk_buff *skb, int pid)
-{
- int rc;
-
- rc = netlink_unicast(nls, skb, pid, MSG_DONTWAIT);
- if (rc < 0) {
- printk(KERN_ERR "iscsi: can not unicast skb (%d)\n", rc);
- return rc;
- }
-
- return 0;
+ return nlmsg_multicast(nls, skb, 0, group, gfp);
}
int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
@@ -980,7 +965,7 @@
return -ENOMEM;
}
- nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+ nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
ev = NLMSG_DATA(nlh);
memset(ev, 0, sizeof(*ev));
ev->transport_handle = iscsi_handle(conn->transport);
@@ -991,10 +976,45 @@
memcpy(pdu, hdr, sizeof(struct iscsi_hdr));
memcpy(pdu + sizeof(struct iscsi_hdr), data, data_size);
- return iscsi_unicast_skb(skb, priv->daemon_pid);
+ return iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
}
EXPORT_SYMBOL_GPL(iscsi_recv_pdu);
+int iscsi_offload_mesg(struct Scsi_Host *shost,
+ struct iscsi_transport *transport, uint32_t type,
+ char *data, uint16_t data_size)
+{
+ struct nlmsghdr *nlh;
+ struct sk_buff *skb;
+ struct iscsi_uevent *ev;
+ int len = NLMSG_SPACE(sizeof(*ev) + data_size);
+
+ skb = alloc_skb(len, GFP_NOIO);
+ if (!skb) {
+ printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
+ return -ENOMEM;
+ }
+
+ nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
+ ev = NLMSG_DATA(nlh);
+ memset(ev, 0, sizeof(*ev));
+ ev->type = type;
+ ev->transport_handle = iscsi_handle(transport);
+ switch (type) {
+ case ISCSI_KEVENT_PATH_REQ:
+ ev->r.req_path.host_no = shost->host_no;
+ break;
+ case ISCSI_KEVENT_IF_DOWN:
+ ev->r.notify_if_down.host_no = shost->host_no;
+ break;
+ }
+
+ memcpy((char *)ev + sizeof(*ev), data, data_size);
+
+ return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+}
+EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
+
void iscsi_conn_error_event(struct iscsi_cls_conn *conn, enum iscsi_err error)
{
struct nlmsghdr *nlh;
@@ -1014,7 +1034,7 @@
return;
}
- nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+ nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
ev = NLMSG_DATA(nlh);
ev->transport_handle = iscsi_handle(conn->transport);
ev->type = ISCSI_KEVENT_CONN_ERROR;
@@ -1022,7 +1042,7 @@
ev->r.connerror.cid = conn->cid;
ev->r.connerror.sid = iscsi_conn_get_sid(conn);
- iscsi_broadcast_skb(skb, GFP_ATOMIC);
+ iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_ATOMIC);
iscsi_cls_conn_printk(KERN_INFO, conn, "detected conn error (%d)\n",
error);
@@ -1030,8 +1050,8 @@
EXPORT_SYMBOL_GPL(iscsi_conn_error_event);
static int
-iscsi_if_send_reply(int pid, int seq, int type, int done, int multi,
- void *payload, int size)
+iscsi_if_send_reply(uint32_t group, int seq, int type, int done, int multi,
+ void *payload, int size)
{
struct sk_buff *skb;
struct nlmsghdr *nlh;
@@ -1045,10 +1065,10 @@
return -ENOMEM;
}
- nlh = __nlmsg_put(skb, pid, seq, t, (len - sizeof(*nlh)), 0);
+ nlh = __nlmsg_put(skb, 0, 0, t, (len - sizeof(*nlh)), 0);
nlh->nlmsg_flags = flags;
memcpy(NLMSG_DATA(nlh), payload, size);
- return iscsi_unicast_skb(skb, pid);
+ return iscsi_multicast_skb(skb, group, GFP_ATOMIC);
}
static int
@@ -1085,7 +1105,7 @@
return -ENOMEM;
}
- nlhstat = __nlmsg_put(skbstat, priv->daemon_pid, 0, 0,
+ nlhstat = __nlmsg_put(skbstat, 0, 0, 0,
(len - sizeof(*nlhstat)), 0);
evstat = NLMSG_DATA(nlhstat);
memset(evstat, 0, sizeof(*evstat));
@@ -1109,7 +1129,8 @@
skb_trim(skbstat, NLMSG_ALIGN(actual_size));
nlhstat->nlmsg_len = actual_size;
- err = iscsi_unicast_skb(skbstat, priv->daemon_pid);
+ err = iscsi_multicast_skb(skbstat, ISCSI_NL_GRP_ISCSID,
+ GFP_ATOMIC);
} while (err < 0 && err != -ECONNREFUSED);
return err;
@@ -1143,7 +1164,7 @@
return -ENOMEM;
}
- nlh = __nlmsg_put(skb, priv->daemon_pid, 0, 0, (len - sizeof(*nlh)), 0);
+ nlh = __nlmsg_put(skb, 0, 0, 0, (len - sizeof(*nlh)), 0);
ev = NLMSG_DATA(nlh);
ev->transport_handle = iscsi_handle(session->transport);
@@ -1172,7 +1193,7 @@
* this will occur if the daemon is not up, so we just warn
* the user and when the daemon is restarted it will handle it
*/
- rc = iscsi_broadcast_skb(skb, GFP_KERNEL);
+ rc = iscsi_multicast_skb(skb, ISCSI_NL_GRP_ISCSID, GFP_KERNEL);
if (rc == -ESRCH)
iscsi_cls_session_printk(KERN_ERR, session,
"Cannot notify userspace of session "
@@ -1268,26 +1289,54 @@
return err;
}
+static int iscsi_if_ep_connect(struct iscsi_transport *transport,
+ struct iscsi_uevent *ev, int msg_type)
+{
+ struct iscsi_endpoint *ep;
+ struct sockaddr *dst_addr;
+ struct Scsi_Host *shost = NULL;
+ int non_blocking, err = 0;
+
+ if (!transport->ep_connect)
+ return -EINVAL;
+
+ if (msg_type == ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST) {
+ shost = scsi_host_lookup(ev->u.ep_connect_through_host.host_no);
+ if (!shost) {
+ printk(KERN_ERR "ep connect failed. Could not find "
+ "host no %u\n",
+ ev->u.ep_connect_through_host.host_no);
+ return -ENODEV;
+ }
+ non_blocking = ev->u.ep_connect_through_host.non_blocking;
+ } else
+ non_blocking = ev->u.ep_connect.non_blocking;
+
+ dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
+ ep = transport->ep_connect(shost, dst_addr, non_blocking);
+ if (IS_ERR(ep)) {
+ err = PTR_ERR(ep);
+ goto release_host;
+ }
+
+ ev->r.ep_connect_ret.handle = ep->id;
+release_host:
+ if (shost)
+ scsi_host_put(shost);
+ return err;
+}
+
static int
iscsi_if_transport_ep(struct iscsi_transport *transport,
struct iscsi_uevent *ev, int msg_type)
{
struct iscsi_endpoint *ep;
- struct sockaddr *dst_addr;
int rc = 0;
switch (msg_type) {
+ case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
- if (!transport->ep_connect)
- return -EINVAL;
-
- dst_addr = (struct sockaddr *)((char*)ev + sizeof(*ev));
- ep = transport->ep_connect(dst_addr,
- ev->u.ep_connect.non_blocking);
- if (IS_ERR(ep))
- return PTR_ERR(ep);
-
- ev->r.ep_connect_ret.handle = ep->id;
+ rc = iscsi_if_ep_connect(transport, ev, msg_type);
break;
case ISCSI_UEVENT_TRANSPORT_EP_POLL:
if (!transport->ep_poll)
@@ -1365,7 +1414,31 @@
}
static int
-iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh)
+iscsi_set_path(struct iscsi_transport *transport, struct iscsi_uevent *ev)
+{
+ struct Scsi_Host *shost;
+ struct iscsi_path *params;
+ int err;
+
+ if (!transport->set_path)
+ return -ENOSYS;
+
+ shost = scsi_host_lookup(ev->u.set_path.host_no);
+ if (!shost) {
+ printk(KERN_ERR "set path could not find host no %u\n",
+ ev->u.set_path.host_no);
+ return -ENODEV;
+ }
+
+ params = (struct iscsi_path *)((char *)ev + sizeof(*ev));
+ err = transport->set_path(shost, params);
+
+ scsi_host_put(shost);
+ return err;
+}
+
+static int
+iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
{
int err = 0;
struct iscsi_uevent *ev = NLMSG_DATA(nlh);
@@ -1375,6 +1448,11 @@
struct iscsi_cls_conn *conn;
struct iscsi_endpoint *ep = NULL;
+ if (nlh->nlmsg_type == ISCSI_UEVENT_PATH_UPDATE)
+ *group = ISCSI_NL_GRP_UIP;
+ else
+ *group = ISCSI_NL_GRP_ISCSID;
+
priv = iscsi_if_transport_lookup(iscsi_ptr(ev->transport_handle));
if (!priv)
return -EINVAL;
@@ -1383,8 +1461,6 @@
if (!try_module_get(transport->owner))
return -EINVAL;
- priv->daemon_pid = NETLINK_CREDS(skb)->pid;
-
switch (nlh->nlmsg_type) {
case ISCSI_UEVENT_CREATE_SESSION:
err = iscsi_if_create_session(priv, ep, ev,
@@ -1469,6 +1545,7 @@
case ISCSI_UEVENT_TRANSPORT_EP_CONNECT:
case ISCSI_UEVENT_TRANSPORT_EP_POLL:
case ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT:
+ case ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST:
err = iscsi_if_transport_ep(transport, ev, nlh->nlmsg_type);
break;
case ISCSI_UEVENT_TGT_DSCVR:
@@ -1477,6 +1554,9 @@
case ISCSI_UEVENT_SET_HOST_PARAM:
err = iscsi_set_host_param(transport, ev);
break;
+ case ISCSI_UEVENT_PATH_UPDATE:
+ err = iscsi_set_path(transport, ev);
+ break;
default:
err = -ENOSYS;
break;
@@ -1499,6 +1579,7 @@
uint32_t rlen;
struct nlmsghdr *nlh;
struct iscsi_uevent *ev;
+ uint32_t group;
nlh = nlmsg_hdr(skb);
if (nlh->nlmsg_len < sizeof(*nlh) ||
@@ -1511,7 +1592,7 @@
if (rlen > skb->len)
rlen = skb->len;
- err = iscsi_if_recv_msg(skb, nlh);
+ err = iscsi_if_recv_msg(skb, nlh, &group);
if (err) {
ev->type = ISCSI_KEVENT_IF_ERROR;
ev->iferror = err;
@@ -1525,8 +1606,7 @@
*/
if (ev->type == ISCSI_UEVENT_GET_STATS && !err)
break;
- err = iscsi_if_send_reply(
- NETLINK_CREDS(skb)->pid, nlh->nlmsg_seq,
+ err = iscsi_if_send_reply(group, nlh->nlmsg_seq,
nlh->nlmsg_type, 0, 0, ev, sizeof(*ev));
} while (err < 0 && err != -ECONNREFUSED);
skb_pull(skb, rlen);
@@ -1774,7 +1854,6 @@
if (!priv)
return NULL;
INIT_LIST_HEAD(&priv->list);
- priv->daemon_pid = -1;
priv->iscsi_transport = tt;
priv->t.user_scan = iscsi_user_scan;
priv->t.create_work_queue = 1;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index bcf3bd4..878b17a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1902,24 +1902,6 @@
index = sdkp->index;
dev = &sdp->sdev_gendev;
- if (!sdp->request_queue->rq_timeout) {
- if (sdp->type != TYPE_MOD)
- blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
- else
- blk_queue_rq_timeout(sdp->request_queue,
- SD_MOD_TIMEOUT);
- }
-
- device_initialize(&sdkp->dev);
- sdkp->dev.parent = &sdp->sdev_gendev;
- sdkp->dev.class = &sd_disk_class;
- dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
-
- if (device_add(&sdkp->dev))
- goto out_free_index;
-
- get_device(&sdp->sdev_gendev);
-
if (index < SD_MAX_DISKS) {
gd->major = sd_major((index & 0xf0) >> 4);
gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
@@ -1954,11 +1936,6 @@
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
sdp->removable ? "removable " : "");
-
- return;
-
- out_free_index:
- ida_remove(&sd_index_ida, index);
}
/**
@@ -2026,6 +2003,24 @@
sdkp->openers = 0;
sdkp->previous_state = 1;
+ if (!sdp->request_queue->rq_timeout) {
+ if (sdp->type != TYPE_MOD)
+ blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
+ else
+ blk_queue_rq_timeout(sdp->request_queue,
+ SD_MOD_TIMEOUT);
+ }
+
+ device_initialize(&sdkp->dev);
+ sdkp->dev.parent = &sdp->sdev_gendev;
+ sdkp->dev.class = &sd_disk_class;
+ dev_set_name(&sdkp->dev, dev_name(&sdp->sdev_gendev));
+
+ if (device_add(&sdkp->dev))
+ goto out_free_index;
+
+ get_device(&sdp->sdev_gendev);
+
async_schedule(sd_probe_async, sdkp);
return 0;
@@ -2055,8 +2050,10 @@
**/
static int sd_remove(struct device *dev)
{
- struct scsi_disk *sdkp = dev_get_drvdata(dev);
+ struct scsi_disk *sdkp;
+ async_synchronize_full();
+ sdkp = dev_get_drvdata(dev);
device_del(&sdkp->dev);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 89bd438..b33d042 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -2964,7 +2964,7 @@
!(STp->use_pf & PF_TESTED)) {
/* Try the other possible state of Page Format if not
already tried */
- STp->use_pf = !STp->use_pf | PF_TESTED;
+ STp->use_pf = (STp->use_pf ^ USE_PF) | PF_TESTED;
st_release_request(SRpnt);
SRpnt = NULL;
return st_int_ioctl(STp, cmd_in, arg);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 583966e..45374d6 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -737,11 +737,14 @@
struct sym_hcb *np = sym_get_hcb(sdev->host);
struct sym_tcb *tp = &np->target[sdev->id];
struct sym_lcb *lp;
+ unsigned long flags;
+ int error;
if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
return -ENXIO;
- tp->starget = sdev->sdev_target;
+ spin_lock_irqsave(np->s.host->host_lock, flags);
+
/*
* Fail the device init if the device is flagged NOSCAN at BOOT in
* the NVRAM. This may speed up boot and maintain coherency with
@@ -753,26 +756,37 @@
if (tp->usrflags & SYM_SCAN_BOOT_DISABLED) {
tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
- starget_printk(KERN_INFO, tp->starget,
+ starget_printk(KERN_INFO, sdev->sdev_target,
"Scan at boot disabled in NVRAM\n");
- return -ENXIO;
+ error = -ENXIO;
+ goto out;
}
if (tp->usrflags & SYM_SCAN_LUNS_DISABLED) {
- if (sdev->lun != 0)
- return -ENXIO;
- starget_printk(KERN_INFO, tp->starget,
+ if (sdev->lun != 0) {
+ error = -ENXIO;
+ goto out;
+ }
+ starget_printk(KERN_INFO, sdev->sdev_target,
"Multiple LUNs disabled in NVRAM\n");
}
lp = sym_alloc_lcb(np, sdev->id, sdev->lun);
- if (!lp)
- return -ENOMEM;
+ if (!lp) {
+ error = -ENOMEM;
+ goto out;
+ }
+ if (tp->nlcb == 1)
+ tp->starget = sdev->sdev_target;
spi_min_period(tp->starget) = tp->usr_period;
spi_max_width(tp->starget) = tp->usr_width;
- return 0;
+ error = 0;
+out:
+ spin_unlock_irqrestore(np->s.host->host_lock, flags);
+
+ return error;
}
/*
@@ -819,12 +833,34 @@
static void sym53c8xx_slave_destroy(struct scsi_device *sdev)
{
struct sym_hcb *np = sym_get_hcb(sdev->host);
- struct sym_lcb *lp = sym_lp(&np->target[sdev->id], sdev->lun);
+ struct sym_tcb *tp = &np->target[sdev->id];
+ struct sym_lcb *lp = sym_lp(tp, sdev->lun);
+ unsigned long flags;
- if (lp->itlq_tbl)
- sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK * 4, "ITLQ_TBL");
- kfree(lp->cb_tags);
- sym_mfree_dma(lp, sizeof(*lp), "LCB");
+ spin_lock_irqsave(np->s.host->host_lock, flags);
+
+ if (lp->busy_itlq || lp->busy_itl) {
+ /*
+ * This really shouldn't happen, but we can't return an error
+ * so let's try to stop all on-going I/O.
+ */
+ starget_printk(KERN_WARNING, tp->starget,
+ "Removing busy LCB (%d)\n", sdev->lun);
+ sym_reset_scsi_bus(np, 1);
+ }
+
+ if (sym_free_lcb(np, sdev->id, sdev->lun) == 0) {
+ /*
+ * It was the last unit for this target.
+ */
+ tp->head.sval = 0;
+ tp->head.wval = np->rv_scntl3;
+ tp->head.uval = 0;
+ tp->tgoal.check_nego = 1;
+ tp->starget = NULL;
+ }
+
+ spin_unlock_irqrestore(np->s.host->host_lock, flags);
}
/*
@@ -890,6 +926,8 @@
if (!((uc->target >> t) & 1))
continue;
tp = &np->target[t];
+ if (!tp->nlcb)
+ continue;
switch (uc->cmd) {
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index ffa70d1..69ad494 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -1896,6 +1896,15 @@
tp->head.sval = 0;
tp->head.wval = np->rv_scntl3;
tp->head.uval = 0;
+ if (tp->lun0p)
+ tp->lun0p->to_clear = 0;
+ if (tp->lunmp) {
+ int ln;
+
+ for (ln = 1; ln < SYM_CONF_MAX_LUN; ln++)
+ if (tp->lunmp[ln])
+ tp->lunmp[ln]->to_clear = 0;
+ }
}
/*
@@ -4988,7 +4997,7 @@
*/
if (ln && !tp->lunmp) {
tp->lunmp = kcalloc(SYM_CONF_MAX_LUN, sizeof(struct sym_lcb *),
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!tp->lunmp)
goto fail;
}
@@ -5008,6 +5017,7 @@
tp->lun0p = lp;
tp->head.lun0_sa = cpu_to_scr(vtobus(lp));
}
+ tp->nlcb++;
/*
* Let the itl task point to error handling.
@@ -5085,6 +5095,43 @@
}
/*
+ * Lun control block deallocation. Returns the number of valid remaing LCBs
+ * for the target.
+ */
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
+{
+ struct sym_tcb *tp = &np->target[tn];
+ struct sym_lcb *lp = sym_lp(tp, ln);
+
+ tp->nlcb--;
+
+ if (ln) {
+ if (!tp->nlcb) {
+ kfree(tp->lunmp);
+ sym_mfree_dma(tp->luntbl, 256, "LUNTBL");
+ tp->lunmp = NULL;
+ tp->luntbl = NULL;
+ tp->head.luntbl_sa = cpu_to_scr(vtobus(np->badluntbl));
+ } else {
+ tp->luntbl[ln] = cpu_to_scr(vtobus(&np->badlun_sa));
+ tp->lunmp[ln] = NULL;
+ }
+ } else {
+ tp->lun0p = NULL;
+ tp->head.lun0_sa = cpu_to_scr(vtobus(&np->badlun_sa));
+ }
+
+ if (lp->itlq_tbl) {
+ sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, "ITLQ_TBL");
+ kfree(lp->cb_tags);
+ }
+
+ sym_mfree_dma(lp, sizeof(*lp), "LCB");
+
+ return tp->nlcb;
+}
+
+/*
* Queue a SCSI IO to the controller.
*/
int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h
index 9ebc870..053e63c 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.h
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h
@@ -401,6 +401,7 @@
* An array of bus addresses is used on reselection.
*/
u32 *luntbl; /* LCBs bus address table */
+ int nlcb; /* Number of valid LCBs (including LUN #0) */
/*
* LUN table used by the C code.
@@ -1065,6 +1066,7 @@
struct sym_ccb *sym_get_ccb(struct sym_hcb *np, struct scsi_cmnd *cmd, u_char tag_order);
void sym_free_ccb(struct sym_hcb *np, struct sym_ccb *cp);
struct sym_lcb *sym_alloc_lcb(struct sym_hcb *np, u_char tn, u_char ln);
+int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln);
int sym_queue_scsiio(struct sym_hcb *np, struct scsi_cmnd *csio, struct sym_ccb *cp);
int sym_abort_scsiio(struct sym_hcb *np, struct scsi_cmnd *ccb, int timed_out);
int sym_reset_scsi_target(struct sym_hcb *np, int target);
diff --git a/fs/exofs/common.h b/fs/exofs/common.h
index b1512c4..24667ee 100644
--- a/fs/exofs/common.h
+++ b/fs/exofs/common.h
@@ -175,10 +175,4 @@
int extract_attr_from_req(struct osd_request *or, struct osd_attr *attr);
-int osd_req_read_kern(struct osd_request *or,
- const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
-int osd_req_write_kern(struct osd_request *or,
- const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
-
#endif /*ifndef __EXOFS_COM_H__*/
diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c
index ba8d9fa..77d0a29 100644
--- a/fs/exofs/inode.c
+++ b/fs/exofs/inode.c
@@ -59,10 +59,9 @@
struct inode *inode)
{
struct exofs_sb_info *sbi = inode->i_sb->s_fs_info;
- struct request_queue *req_q = sbi->s_dev->scsi_device->request_queue;
pcol->sbi = sbi;
- pcol->req_q = req_q;
+ pcol->req_q = osd_request_queue(sbi->s_dev);
pcol->inode = inode;
pcol->expected_pages = expected_pages;
@@ -266,7 +265,7 @@
goto err;
}
- osd_req_read(or, &obj, pcol->bio, i_start);
+ osd_req_read(or, &obj, i_start, pcol->bio, pcol->length);
if (is_sync) {
exofs_sync_op(or, pcol->sbi->s_timeout, oi->i_cred);
@@ -522,7 +521,8 @@
*pcol_copy = *pcol;
- osd_req_write(or, &obj, pcol_copy->bio, i_start);
+ pcol_copy->bio->bi_rw |= (1 << BIO_RW); /* FIXME: bio_set_dir() */
+ osd_req_write(or, &obj, i_start, pcol_copy->bio, pcol_copy->length);
ret = exofs_async_op(or, writepages_done, pcol_copy, oi->i_cred);
if (unlikely(ret)) {
EXOFS_ERR("write_exec: exofs_async_op() Faild\n");
diff --git a/fs/exofs/osd.c b/fs/exofs/osd.c
index 06ca926..b3d2ccb 100644
--- a/fs/exofs/osd.c
+++ b/fs/exofs/osd.c
@@ -125,29 +125,3 @@
return -EIO;
}
-
-int osd_req_read_kern(struct osd_request *or,
- const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
- struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
- struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
- if (!bio)
- return -ENOMEM;
-
- osd_req_read(or, obj, bio, offset);
- return 0;
-}
-
-int osd_req_write_kern(struct osd_request *or,
- const struct osd_obj_id *obj, u64 offset, void* buff, u64 len)
-{
- struct request_queue *req_q = or->osd_dev->scsi_device->request_queue;
- struct bio *bio = bio_map_kern(req_q, buff, len, GFP_KERNEL);
-
- if (!bio)
- return -ENOMEM;
-
- osd_req_write(or, obj, bio, offset);
- return 0;
-}
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index cfe4fe1..60e8934 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -79,6 +79,7 @@
#define ETH_P_AOE 0x88A2 /* ATA over Ethernet */
#define ETH_P_TIPC 0x88CA /* TIPC */
#define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */
+#define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */
#define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
/*
diff --git a/include/scsi/fc/fc_fip.h b/include/scsi/fc/fc_fip.h
index 0627a9a..3d138c1 100644
--- a/include/scsi/fc/fc_fip.h
+++ b/include/scsi/fc/fc_fip.h
@@ -22,13 +22,6 @@
* http://www.t11.org/ftp/t11/pub/fc/bb-5/08-543v1.pdf
*/
-/*
- * The FIP ethertype eventually goes in net/if_ether.h.
- */
-#ifndef ETH_P_FIP
-#define ETH_P_FIP 0x8914 /* FIP Ethertype */
-#endif
-
#define FIP_DEF_PRI 128 /* default selection priority */
#define FIP_DEF_FC_MAP 0x0efc00 /* default FCoE MAP (MAC OUI) value */
#define FIP_DEF_FKA 8000 /* default FCF keep-alive/advert period (mS) */
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index d0ed522..4426f00 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -22,6 +22,11 @@
#define ISCSI_IF_H
#include <scsi/iscsi_proto.h>
+#include <linux/in.h>
+#include <linux/in6.h>
+
+#define ISCSI_NL_GRP_ISCSID 1
+#define ISCSI_NL_GRP_UIP 2
#define UEVENT_BASE 10
#define KEVENT_BASE 100
@@ -50,7 +55,10 @@
ISCSI_UEVENT_TGT_DSCVR = UEVENT_BASE + 15,
ISCSI_UEVENT_SET_HOST_PARAM = UEVENT_BASE + 16,
ISCSI_UEVENT_UNBIND_SESSION = UEVENT_BASE + 17,
- ISCSI_UEVENT_CREATE_BOUND_SESSION = UEVENT_BASE + 18,
+ ISCSI_UEVENT_CREATE_BOUND_SESSION = UEVENT_BASE + 18,
+ ISCSI_UEVENT_TRANSPORT_EP_CONNECT_THROUGH_HOST = UEVENT_BASE + 19,
+
+ ISCSI_UEVENT_PATH_UPDATE = UEVENT_BASE + 20,
/* up events */
ISCSI_KEVENT_RECV_PDU = KEVENT_BASE + 1,
@@ -59,6 +67,9 @@
ISCSI_KEVENT_DESTROY_SESSION = KEVENT_BASE + 4,
ISCSI_KEVENT_UNBIND_SESSION = KEVENT_BASE + 5,
ISCSI_KEVENT_CREATE_SESSION = KEVENT_BASE + 6,
+
+ ISCSI_KEVENT_PATH_REQ = KEVENT_BASE + 7,
+ ISCSI_KEVENT_IF_DOWN = KEVENT_BASE + 8,
};
enum iscsi_tgt_dscvr {
@@ -131,6 +142,10 @@
struct msg_transport_connect {
uint32_t non_blocking;
} ep_connect;
+ struct msg_transport_connect_through_host {
+ uint32_t host_no;
+ uint32_t non_blocking;
+ } ep_connect_through_host;
struct msg_transport_poll {
uint64_t ep_handle;
uint32_t timeout_ms;
@@ -154,6 +169,9 @@
uint32_t param; /* enum iscsi_host_param */
uint32_t len;
} set_host_param;
+ struct msg_set_path {
+ uint32_t host_no;
+ } set_path;
} u;
union {
/* messages k -> u */
@@ -187,10 +205,39 @@
struct msg_transport_connect_ret {
uint64_t handle;
} ep_connect_ret;
+ struct msg_req_path {
+ uint32_t host_no;
+ } req_path;
+ struct msg_notify_if_down {
+ uint32_t host_no;
+ } notify_if_down;
} r;
} __attribute__ ((aligned (sizeof(uint64_t))));
/*
+ * To keep the struct iscsi_uevent size the same for userspace code
+ * compatibility, the main structure for ISCSI_UEVENT_PATH_UPDATE and
+ * ISCSI_KEVENT_PATH_REQ is defined separately and comes after the
+ * struct iscsi_uevent in the NETLINK_ISCSI message.
+ */
+struct iscsi_path {
+ uint64_t handle;
+ uint8_t mac_addr[6];
+ uint8_t mac_addr_old[6];
+ uint32_t ip_addr_len; /* 4 or 16 */
+ union {
+ struct in_addr v4_addr;
+ struct in6_addr v6_addr;
+ } src;
+ union {
+ struct in_addr v4_addr;
+ struct in6_addr v6_addr;
+ } dst;
+ uint16_t vlan_id;
+ uint16_t pmtu;
+} __attribute__ ((aligned (sizeof(uint64_t))));
+
+/*
* Common error codes
*/
enum iscsi_err {
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 45f9cc6..ebdd9f4 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -679,6 +679,7 @@
unsigned int e_d_tov;
unsigned int r_a_tov;
u8 max_retry_count;
+ u8 max_rport_retry_count;
u16 link_speed;
u16 link_supported_speeds;
u16 lro_xid; /* max xid for fcoe lro */
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 0289f57..196525c 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -82,9 +82,12 @@
enum {
+ ISCSI_TASK_FREE,
ISCSI_TASK_COMPLETED,
ISCSI_TASK_PENDING,
ISCSI_TASK_RUNNING,
+ ISCSI_TASK_ABRT_TMF, /* aborted due to TMF */
+ ISCSI_TASK_ABRT_SESS_RECOV, /* aborted due to session recovery */
};
struct iscsi_r2t_info {
@@ -181,9 +184,7 @@
/* xmit */
struct list_head mgmtqueue; /* mgmt (control) xmit queue */
- struct list_head mgmt_run_list; /* list of control tasks */
- struct list_head xmitqueue; /* data-path cmd queue */
- struct list_head run_list; /* list of cmds in progress */
+ struct list_head cmdqueue; /* data-path cmd queue */
struct list_head requeue; /* tasks needing another run */
struct work_struct xmitwork; /* per-conn. xmit workqueue */
unsigned long suspend_tx; /* suspend Tx */
@@ -406,6 +407,7 @@
char *, int);
extern int iscsi_verify_itt(struct iscsi_conn *, itt_t);
extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
+extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
extern void iscsi_requeue_task(struct iscsi_task *task);
extern void iscsi_put_task(struct iscsi_task *task);
extern void __iscsi_get_task(struct iscsi_task *task);
diff --git a/include/scsi/osd_attributes.h b/include/scsi/osd_attributes.h
index f888a6f..56e920a 100644
--- a/include/scsi/osd_attributes.h
+++ b/include/scsi/osd_attributes.h
@@ -29,6 +29,7 @@
OSD_APAGE_PARTITION_INFORMATION = OSD_APAGE_PARTITION_FIRST + 1,
OSD_APAGE_PARTITION_QUOTAS = OSD_APAGE_PARTITION_FIRST + 2,
OSD_APAGE_PARTITION_TIMESTAMP = OSD_APAGE_PARTITION_FIRST + 3,
+ OSD_APAGE_PARTITION_ATTR_ACCESS = OSD_APAGE_PARTITION_FIRST + 4,
OSD_APAGE_PARTITION_SECURITY = OSD_APAGE_PARTITION_FIRST + 5,
OSD_APAGE_PARTITION_LAST = 0x5FFFFFFF,
@@ -51,7 +52,9 @@
OSD_APAGE_RESERVED_TYPE_LAST = 0xEFFFFFFF,
OSD_APAGE_COMMON_FIRST = 0xF0000000,
- OSD_APAGE_COMMON_LAST = 0xFFFFFFFE,
+ OSD_APAGE_COMMON_LAST = 0xFFFFFFFD,
+
+ OSD_APAGE_CURRENT_COMMAND = 0xFFFFFFFE,
OSD_APAGE_REQUEST_ALL = 0xFFFFFFFF,
};
@@ -106,10 +109,30 @@
OSD_ATTR_RI_PRODUCT_REVISION_LEVEL = 0x7, /* 4 */
OSD_ATTR_RI_PRODUCT_SERIAL_NUMBER = 0x8, /* variable */
OSD_ATTR_RI_OSD_NAME = 0x9, /* variable */
+ OSD_ATTR_RI_MAX_CDB_CONTINUATION_LEN = 0xA, /* 4 */
OSD_ATTR_RI_TOTAL_CAPACITY = 0x80, /* 8 */
OSD_ATTR_RI_USED_CAPACITY = 0x81, /* 8 */
OSD_ATTR_RI_NUMBER_OF_PARTITIONS = 0xC0, /* 8 */
OSD_ATTR_RI_CLOCK = 0x100, /* 6 */
+ OARI_DEFAULT_ISOLATION_METHOD = 0X110, /* 1 */
+ OARI_SUPPORTED_ISOLATION_METHODS = 0X111, /* 32 */
+
+ OARI_DATA_ATOMICITY_GUARANTEE = 0X120, /* 8 */
+ OARI_DATA_ATOMICITY_ALIGNMENT = 0X121, /* 8 */
+ OARI_ATTRIBUTES_ATOMICITY_GUARANTEE = 0X122, /* 8 */
+ OARI_DATA_ATTRIBUTES_ATOMICITY_MULTIPLIER = 0X123, /* 1 */
+
+ OARI_MAXIMUM_SNAPSHOTS_COUNT = 0X1C1, /* 0 or 4 */
+ OARI_MAXIMUM_CLONES_COUNT = 0X1C2, /* 0 or 4 */
+ OARI_MAXIMUM_BRANCH_DEPTH = 0X1CC, /* 0 or 4 */
+ OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_FIRST = 0X200, /* 0 or 4 */
+ OARI_SUPPORTED_OBJECT_DUPLICATION_METHOD_LAST = 0X2ff, /* 0 or 4 */
+ OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_FIRST = 0X300, /* 0 or 4 */
+ OARI_SUPPORTED_TIME_OF_DUPLICATION_METHOD_LAST = 0X30F, /* 0 or 4 */
+ OARI_SUPPORT_FOR_DUPLICATED_OBJECT_FREEZING = 0X310, /* 0 or 4 */
+ OARI_SUPPORT_FOR_SNAPSHOT_REFRESHING = 0X311, /* 0 or 1 */
+ OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_FIRST = 0X7000001,/* 0 or 4 */
+ OARI_SUPPORTED_CDB_CONTINUATION_DESC_TYPE_LAST = 0X700FFFF,/* 0 or 4 */
};
/* Root_Information_attributes_page does not have a get_page structure */
@@ -120,7 +143,15 @@
OSD_ATTR_PI_PARTITION_ID = 0x1, /* 8 */
OSD_ATTR_PI_USERNAME = 0x9, /* variable */
OSD_ATTR_PI_USED_CAPACITY = 0x81, /* 8 */
+ OSD_ATTR_PI_USED_CAPACITY_INCREMENT = 0x84, /* 0 or 8 */
OSD_ATTR_PI_NUMBER_OF_OBJECTS = 0xC1, /* 8 */
+
+ OSD_ATTR_PI_ACTUAL_DATA_SPACE = 0xD1, /* 0 or 8 */
+ OSD_ATTR_PI_RESERVED_DATA_SPACE = 0xD2, /* 0 or 8 */
+ OSD_ATTR_PI_DEFAULT_SNAPSHOT_DUPLICATION_METHOD = 0x200,/* 0 or 4 */
+ OSD_ATTR_PI_DEFAULT_CLONE_DUPLICATION_METHOD = 0x201,/* 0 or 4 */
+ OSD_ATTR_PI_DEFAULT_SP_TIME_OF_DUPLICATION = 0x300,/* 0 or 4 */
+ OSD_ATTR_PI_DEFAULT_CLONE_TIME_OF_DUPLICATION = 0x301,/* 0 or 4 */
};
/* Partition Information attributes page does not have a get_page structure */
@@ -131,6 +162,7 @@
OSD_ATTR_CI_PARTITION_ID = 0x1, /* 8 */
OSD_ATTR_CI_COLLECTION_OBJECT_ID = 0x2, /* 8 */
OSD_ATTR_CI_USERNAME = 0x9, /* variable */
+ OSD_ATTR_CI_COLLECTION_TYPE = 0xA, /* 1 */
OSD_ATTR_CI_USED_CAPACITY = 0x81, /* 8 */
};
/* Collection Information attributes page does not have a get_page structure */
@@ -144,6 +176,8 @@
OSD_ATTR_OI_USERNAME = 0x9, /* variable */
OSD_ATTR_OI_USED_CAPACITY = 0x81, /* 8 */
OSD_ATTR_OI_LOGICAL_LENGTH = 0x82, /* 8 */
+ SD_ATTR_OI_ACTUAL_DATA_SPACE = 0XD1, /* 0 OR 8 */
+ SD_ATTR_OI_RESERVED_DATA_SPACE = 0XD2, /* 0 OR 8 */
};
/* Object Information attributes page does not have a get_page structure */
@@ -248,7 +282,18 @@
struct osd_timestamp data_modified_time;
} __packed;
-/* 7.1.2.19 Collections attributes page */
+/* OSD2r05: 7.1.3.19 Attributes Access attributes page
+ * (OSD_APAGE_PARTITION_ATTR_ACCESS)
+ *
+ * each attribute is of the form below. Total array length is deduced
+ * from the attribute's length
+ * (See allowed_attributes_access of the struct osd_cap_object_descriptor)
+ */
+struct attributes_access_attr {
+ struct osd_attributes_list_attrid attr_list[0];
+} __packed;
+
+/* OSD2r05: 7.1.2.21 Collections attributes page */
/* TBD */
/* 7.1.2.20 Root Policy/Security attributes page (OSD_APAGE_ROOT_SECURITY) */
@@ -324,4 +369,29 @@
__be32 policy_access_tag;
} __packed;
+/* OSD2r05: 7.1.3.31 Current Command attributes page
+ * (OSD_APAGE_CURRENT_COMMAND)
+ */
+enum {
+ OSD_ATTR_CC_RESPONSE_INTEGRITY_CHECK_VALUE = 0x1, /* 32 */
+ OSD_ATTR_CC_OBJECT_TYPE = 0x2, /* 1 */
+ OSD_ATTR_CC_PARTITION_ID = 0x3, /* 8 */
+ OSD_ATTR_CC_OBJECT_ID = 0x4, /* 8 */
+ OSD_ATTR_CC_STARTING_BYTE_ADDRESS_OF_APPEND = 0x5, /* 8 */
+ OSD_ATTR_CC_CHANGE_IN_USED_CAPACITY = 0x6, /* 8 */
+};
+
+/*TBD: osdv1_current_command_attributes_page */
+
+struct osdv2_current_command_attributes_page {
+ struct osd_attr_page_header hdr; /* id=0xFFFFFFFE, size=0x44 */
+ u8 response_integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+ u8 object_type;
+ u8 reserved[3];
+ __be64 partition_id;
+ __be64 object_id;
+ __be64 starting_byte_address_of_append;
+ __be64 change_in_used_capacity;
+};
+
#endif /*ndef __OSD_ATTRIBUTES_H__*/
diff --git a/include/scsi/osd_initiator.h b/include/scsi/osd_initiator.h
index b24d961..02bd9f7 100644
--- a/include/scsi/osd_initiator.h
+++ b/include/scsi/osd_initiator.h
@@ -18,6 +18,7 @@
#include "osd_types.h"
#include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
/* Note: "NI" in comments below means "Not Implemented yet" */
@@ -47,6 +48,7 @@
*/
struct osd_dev {
struct scsi_device *scsi_device;
+ struct file *file;
unsigned def_timeout;
#ifdef OSD_VER1_SUPPORT
@@ -69,6 +71,10 @@
/* some hi level device operations */
int osd_auto_detect_ver(struct osd_dev *od, void *caps); /* GFP_KERNEL */
+static inline struct request_queue *osd_request_queue(struct osd_dev *od)
+{
+ return od->scsi_device->request_queue;
+}
/* we might want to use function vector in the future */
static inline void osd_dev_set_ver(struct osd_dev *od, enum osd_std_version v)
@@ -363,7 +369,9 @@
void osd_req_remove_object(struct osd_request *or, struct osd_obj_id *);
void osd_req_write(struct osd_request *or,
- const struct osd_obj_id *, struct bio *data_out, u64 offset);
+ const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_write_kern(struct osd_request *or,
+ const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
void osd_req_append(struct osd_request *or,
const struct osd_obj_id *, struct bio *data_out);/* NI */
void osd_req_create_write(struct osd_request *or,
@@ -378,7 +386,9 @@
/*V2*/ u64 offset, /*V2*/ u64 len);
void osd_req_read(struct osd_request *or,
- const struct osd_obj_id *, struct bio *data_in, u64 offset);
+ const struct osd_obj_id *obj, u64 offset, struct bio *bio, u64 len);
+int osd_req_read_kern(struct osd_request *or,
+ const struct osd_obj_id *obj, u64 offset, void *buff, u64 len);
/*
* Root/Partition/Collection/Object Attributes commands
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index 62b2ab8..2cc8e8b 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -303,7 +303,15 @@
OSD_ACT_V2(REMOVE_MEMBER_OBJECTS, 0x21)
OSD_ACT_V2(GET_MEMBER_ATTRIBUTES, 0x22)
OSD_ACT_V2(SET_MEMBER_ATTRIBUTES, 0x23)
+
+ OSD_ACT_V2(CREATE_CLONE, 0x28)
+ OSD_ACT_V2(CREATE_SNAPSHOT, 0x29)
+ OSD_ACT_V2(DETACH_CLONE, 0x2A)
+ OSD_ACT_V2(REFRESH_SNAPSHOT_CLONE, 0x2B)
+ OSD_ACT_V2(RESTORE_PARTITION_FROM_SNAPSHOT, 0x2C)
+
OSD_ACT_V2(READ_MAP, 0x31)
+ OSD_ACT_V2(READ_MAPS_COMPARE, 0x32)
OSD_ACT_V1_V2(PERFORM_SCSI_COMMAND, 0x8F7E, 0x8F7C)
OSD_ACT_V1_V2(SCSI_TASK_MANAGEMENT, 0x8F7F, 0x8F7D)
diff --git a/include/scsi/scsi_transport_iscsi.h b/include/scsi/scsi_transport_iscsi.h
index 457588e..349c7f3 100644
--- a/include/scsi/scsi_transport_iscsi.h
+++ b/include/scsi/scsi_transport_iscsi.h
@@ -126,12 +126,14 @@
int *index, int *age);
void (*session_recovery_timedout) (struct iscsi_cls_session *session);
- struct iscsi_endpoint *(*ep_connect) (struct sockaddr *dst_addr,
+ struct iscsi_endpoint *(*ep_connect) (struct Scsi_Host *shost,
+ struct sockaddr *dst_addr,
int non_blocking);
int (*ep_poll) (struct iscsi_endpoint *ep, int timeout_ms);
void (*ep_disconnect) (struct iscsi_endpoint *ep);
int (*tgt_dscvr) (struct Scsi_Host *shost, enum iscsi_tgt_dscvr type,
uint32_t enable, struct sockaddr *dst_addr);
+ int (*set_path) (struct Scsi_Host *shost, struct iscsi_path *params);
};
/*
@@ -148,6 +150,10 @@
extern int iscsi_recv_pdu(struct iscsi_cls_conn *conn, struct iscsi_hdr *hdr,
char *data, uint32_t data_size);
+extern int iscsi_offload_mesg(struct Scsi_Host *shost,
+ struct iscsi_transport *transport, uint32_t type,
+ char *data, uint16_t data_size);
+
struct iscsi_cls_conn {
struct list_head conn_list; /* item in connlist */
void *dd_data; /* LLD private data */