block: convert to pos and nr_sectors accessors
With recent cleanups, there is no place where low level driver
directly manipulates request fields. This means that the 'hard'
request fields always equal the !hard fields. Convert all
rq->sectors, nr_sectors and current_nr_sectors references to
accessors.
While at it, drop superflous blk_rq_pos() < 0 test in swim.c.
[ Impact: use pos and nr_sectors accessors ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Tested-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Acked-by: Mike Miller <mike.miller@hp.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Tim Waugh <tim@cyberelk.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Dario Ballabio <ballabio_dario@emc.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: unsik Kim <donari75@gmail.com>
Cc: Laurent Vivier <Laurent@lvivier.info>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 1300df6..4524862 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -2303,7 +2303,7 @@
/* current_count_sectors can be zero if transfer failed */
if (error)
- nr_sectors = req->current_nr_sectors;
+ nr_sectors = blk_rq_cur_sectors(req);
if (__blk_end_request(req, error, nr_sectors << 9))
return;
@@ -2332,7 +2332,7 @@
if (uptodate) {
/* maintain values for invalidation on geometry
* change */
- block = current_count_sectors + req->sector;
+ block = current_count_sectors + blk_rq_pos(req);
INFBOUND(DRS->maxblock, block);
if (block > _floppy->sect)
DRS->maxtrack = 1;
@@ -2346,10 +2346,10 @@
/* record write error information */
DRWE->write_errors++;
if (DRWE->write_errors == 1) {
- DRWE->first_error_sector = req->sector;
+ DRWE->first_error_sector = blk_rq_pos(req);
DRWE->first_error_generation = DRS->generation;
}
- DRWE->last_error_sector = req->sector;
+ DRWE->last_error_sector = blk_rq_pos(req);
DRWE->last_error_generation = DRS->generation;
}
spin_lock_irqsave(q->queue_lock, flags);
@@ -2503,24 +2503,24 @@
max_sector = transfer_size(ssize,
min(max_sector, max_sector_2),
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
if (current_count_sectors <= 0 && CT(COMMAND) == FD_WRITE &&
- buffer_max > fsector_t + current_req->nr_sectors)
+ buffer_max > fsector_t + blk_rq_sectors(current_req))
current_count_sectors = min_t(int, buffer_max - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
remaining = current_count_sectors << 9;
#ifdef FLOPPY_SANITY_CHECK
- if ((remaining >> 9) > current_req->nr_sectors &&
+ if ((remaining >> 9) > blk_rq_sectors(current_req) &&
CT(COMMAND) == FD_WRITE) {
DPRINT("in copy buffer\n");
printk("current_count_sectors=%ld\n", current_count_sectors);
printk("remaining=%d\n", remaining >> 9);
- printk("current_req->nr_sectors=%ld\n",
- current_req->nr_sectors);
+ printk("current_req->nr_sectors=%u\n",
+ blk_rq_sectors(current_req));
printk("current_req->current_nr_sectors=%u\n",
- current_req->current_nr_sectors);
+ blk_rq_cur_sectors(current_req));
printk("max_sector=%d\n", max_sector);
printk("ssize=%d\n", ssize);
}
@@ -2530,7 +2530,7 @@
dma_buffer = floppy_track_buffer + ((fsector_t - buffer_min) << 9);
- size = current_req->current_nr_sectors << 9;
+ size = blk_rq_cur_sectors(current_req) << 9;
rq_for_each_segment(bv, current_req, iter) {
if (!remaining)
@@ -2648,10 +2648,10 @@
max_sector = _floppy->sect * _floppy->head;
- TRACK = (int)current_req->sector / max_sector;
- fsector_t = (int)current_req->sector % max_sector;
+ TRACK = (int)blk_rq_pos(current_req) / max_sector;
+ fsector_t = (int)blk_rq_pos(current_req) % max_sector;
if (_floppy->track && TRACK >= _floppy->track) {
- if (current_req->current_nr_sectors & 1) {
+ if (blk_rq_cur_sectors(current_req) & 1) {
current_count_sectors = 1;
return 1;
} else
@@ -2669,7 +2669,7 @@
if (fsector_t >= max_sector) {
current_count_sectors =
min_t(int, _floppy->sect - fsector_t,
- current_req->nr_sectors);
+ blk_rq_sectors(current_req));
return 1;
}
SIZECODE = 2;
@@ -2720,7 +2720,7 @@
in_sector_offset = (fsector_t % _floppy->sect) % ssize;
aligned_sector_t = fsector_t - in_sector_offset;
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
if ((raw_cmd->track == buffer_track) &&
(current_drive == buffer_drive) &&
(fsector_t >= buffer_min) && (fsector_t < buffer_max)) {
@@ -2729,10 +2729,10 @@
copy_buffer(1, max_sector, buffer_max);
return 1;
}
- } else if (in_sector_offset || current_req->nr_sectors < ssize) {
+ } else if (in_sector_offset || blk_rq_sectors(current_req) < ssize) {
if (CT(COMMAND) == FD_WRITE) {
- if (fsector_t + current_req->nr_sectors > ssize &&
- fsector_t + current_req->nr_sectors < ssize + ssize)
+ if (fsector_t + blk_rq_sectors(current_req) > ssize &&
+ fsector_t + blk_rq_sectors(current_req) < ssize + ssize)
max_size = ssize + ssize;
else
max_size = ssize;
@@ -2776,7 +2776,7 @@
(indirect * 2 > direct * 3 &&
*errors < DP->max_errors.read_track && ((!probing
|| (DP->read_track & (1 << DRS->probed_format)))))) {
- max_size = current_req->nr_sectors;
+ max_size = blk_rq_sectors(current_req);
} else {
raw_cmd->kernel_data = current_req->buffer;
raw_cmd->length = current_count_sectors << 9;
@@ -2801,7 +2801,7 @@
fsector_t > buffer_max ||
fsector_t < buffer_min ||
((CT(COMMAND) == FD_READ ||
- (!in_sector_offset && current_req->nr_sectors >= ssize)) &&
+ (!in_sector_offset && blk_rq_sectors(current_req) >= ssize)) &&
max_sector > 2 * max_buffer_sectors + buffer_min &&
max_size + fsector_t > 2 * max_buffer_sectors + buffer_min)
/* not enough space */
@@ -2879,8 +2879,8 @@
printk("write\n");
return 0;
}
- } else if (raw_cmd->length > current_req->nr_sectors << 9 ||
- current_count_sectors > current_req->nr_sectors) {
+ } else if (raw_cmd->length > blk_rq_sectors(current_req) << 9 ||
+ current_count_sectors > blk_rq_sectors(current_req)) {
DPRINT("buffer overrun in direct transfer\n");
return 0;
} else if (raw_cmd->length < current_count_sectors << 9) {
@@ -2990,8 +2990,9 @@
if (usage_count == 0) {
printk("warning: usage count=0, current_req=%p exiting\n",
current_req);
- printk("sect=%ld type=%x flags=%x\n", (long)current_req->sector,
- current_req->cmd_type, current_req->cmd_flags);
+ printk("sect=%ld type=%x flags=%x\n",
+ (long)blk_rq_pos(current_req), current_req->cmd_type,
+ current_req->cmd_flags);
return;
}
if (test_bit(0, &fdc_busy)) {