| #ifndef _SPARC64_HYPERVISOR_H |
| #define _SPARC64_HYPERVISOR_H |
| |
| /* Sun4v hypervisor interfaces and defines. |
| * |
| * Hypervisor calls are made via traps to software traps number 0x80 |
| * and above. Registers %o0 to %o5 serve as argument, status, and |
| * return value registers. |
| * |
| * There are two kinds of these traps. First there are the normal |
| * "fast traps" which use software trap 0x80 and encode the function |
| * to invoke by number in register %o5. Argument and return value |
| * handling is as follows: |
| * |
| * ----------------------------------------------- |
| * | %o5 | function number | undefined | |
| * | %o0 | argument 0 | return status | |
| * | %o1 | argument 1 | return value 1 | |
| * | %o2 | argument 2 | return value 2 | |
| * | %o3 | argument 3 | return value 3 | |
| * | %o4 | argument 4 | return value 4 | |
| * ----------------------------------------------- |
| * |
| * The second type are "hyper-fast traps" which encode the function |
| * number in the software trap number itself. So these use trap |
| * numbers > 0x80. The register usage for hyper-fast traps is as |
| * follows: |
| * |
| * ----------------------------------------------- |
| * | %o0 | argument 0 | return status | |
| * | %o1 | argument 1 | return value 1 | |
| * | %o2 | argument 2 | return value 2 | |
| * | %o3 | argument 3 | return value 3 | |
| * | %o4 | argument 4 | return value 4 | |
| * ----------------------------------------------- |
| * |
| * Registers providing explicit arguments to the hypervisor calls |
| * are volatile across the call. Upon return their values are |
| * undefined unless explicitly specified as containing a particular |
| * return value by the specific call. The return status is always |
| * returned in register %o0, zero indicates a successful execution of |
| * the hypervisor call and other values indicate an error status as |
| * defined below. So, for example, if a hyper-fast trap takes |
| * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across |
| * the call and %o3, %o4, and %o5 would be preserved. |
| * |
| * If the hypervisor trap is invalid, or the fast trap function number |
| * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits |
| * of the argument and return values are significant. |
| */ |
| |
| /* Trap numbers. */ |
| #define HV_FAST_TRAP 0x80 |
| #define HV_MMU_MAP_ADDR_TRAP 0x83 |
| #define HV_MMU_UNMAP_ADDR_TRAP 0x84 |
| #define HV_TTRACE_ADDENTRY_TRAP 0x85 |
| #define HV_CORE_TRAP 0xff |
| |
| /* Error codes. */ |
| #define HV_EOK 0 /* Successful return */ |
| #define HV_ENOCPU 1 /* Invalid CPU id */ |
| #define HV_ENORADDR 2 /* Invalid real address */ |
| #define HV_ENOINTR 3 /* Invalid interrupt id */ |
| #define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ |
| #define HV_EBADTSB 5 /* Invalid TSB description */ |
| #define HV_EINVAL 6 /* Invalid argument */ |
| #define HV_EBADTRAP 7 /* Invalid function number */ |
| #define HV_EBADALIGN 8 /* Invalid address alignment */ |
| #define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ |
| #define HV_ENOACCESS 10 /* No access to resource */ |
| #define HV_EIO 11 /* I/O error */ |
| #define HV_ECPUERROR 12 /* CPU in error state */ |
| #define HV_ENOTSUPPORTED 13 /* Function not supported */ |
| #define HV_ENOMAP 14 /* No mapping found */ |
| #define HV_ETOOMANY 15 /* Too many items specified */ |
| |
| /* mach_exit() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MACH_EXIT |
| * ARG0: exit code |
| * ERRORS: This service does not return. |
| * |
| * Stop all CPUs in the virtual domain and place them into the stopped |
| * state. The 64-bit exit code may be passed to a service entity as |
| * the domain's exit status. On systems without a service entity, the |
| * domain will undergo a reset, and the boot firmware will be |
| * reloaded. |
| * |
| * This function will never return to the guest that invokes it. |
| * |
| * Note: By convention an exit code of zero denotes a successful exit by |
| * the guest code. A non-zero exit code denotes a guest specific |
| * error indication. |
| * |
| */ |
| #define HV_FAST_MACH_EXIT 0x00 |
| |
| /* Domain services. */ |
| |
| /* mach_desc() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MACH_DESC |
| * ARG0: buffer |
| * ARG1: length |
| * RET0: status |
| * RET1: length |
| * ERRORS: HV_EBADALIGN Buffer is badly aligned |
| * HV_ENORADDR Buffer is to an illegal real address. |
| * HV_EINVAL Buffer length is too small for complete |
| * machine description. |
| * |
| * Copy the most current machine description into the buffer indicated |
| * by the real address in ARG0. The buffer provided must be 16 byte |
| * aligned. Upon success or HV_EINVAL, this service returns the |
| * actual size of the machine description in the RET1 return value. |
| * |
| * Note: A method of determining the appropriate buffer size for the |
| * machine description is to first call this service with a buffer |
| * length of 0 bytes. |
| */ |
| #define HV_FAST_MACH_DESC 0x01 |
| |
| /* mach_exit() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MACH_SIR |
| * ERRORS: This service does not return. |
| * |
| * Perform a software initiated reset of the virtual machine domain. |
| * All CPUs are captured as soon as possible, all hardware devices are |
| * returned to the entry default state, and the domain is restarted at |
| * the SIR (trap type 0x04) real trap table (RTBA) entry point on one |
| * of the CPUs. The single CPU restarted is selected as determined by |
| * platform specific policy. Memory is preserved across this |
| * operation. |
| */ |
| #define HV_FAST_MACH_SIR 0x02 |
| |
| /* mach_set_soft_state() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE |
| * ARG0: software state |
| * ARG1: software state description pointer |
| * RET0: status |
| * ERRORS: EINVAL software state not valid or software state |
| * description is not NULL terminated |
| * ENORADDR software state description pointer is not a |
| * valid real address |
| * EBADALIGNED software state description is not correctly |
| * aligned |
| * |
| * This allows the guest to report it's soft state to the hypervisor. There |
| * are two primary components to this state. The first part states whether |
| * the guest software is running or not. The second containts optional |
| * details specific to the software. |
| * |
| * The software state argument is defined below in HV_SOFT_STATE_*, and |
| * indicates whether the guest is operating normally or in a transitional |
| * state. |
| * |
| * The software state description argument is a real address of a data buffer |
| * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL |
| * terminated 7-bit ASCII string of up to 31 characters not including the |
| * NULL termination. |
| */ |
| #define HV_FAST_MACH_SET_SOFT_STATE 0x03 |
| #define HV_SOFT_STATE_NORMAL 0x01 |
| #define HV_SOFT_STATE_TRANSITION 0x02 |
| |
| /* mach_get_soft_state() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE |
| * ARG0: software state description pointer |
| * RET0: status |
| * RET1: software state |
| * ERRORS: ENORADDR software state description pointer is not a |
| * valid real address |
| * EBADALIGNED software state description is not correctly |
| * aligned |
| * |
| * Retrieve the current value of the guest's software state. The rules |
| * for the software state pointer are the same as for mach_set_soft_state() |
| * above. |
| */ |
| #define HV_FAST_MACH_GET_SOFT_STATE 0x04 |
| |
| /* CPU services. |
| * |
| * CPUs represent devices that can execute software threads. A single |
| * chip that contains multiple cores or strands is represented as |
| * multiple CPUs with unique CPU identifiers. CPUs are exported to |
| * OBP via the machine description (and to the OS via the OBP device |
| * tree). CPUs are always in one of three states: stopped, running, |
| * or error. |
| * |
| * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a |
| * CPU within a logical domain. Operations that are to be performed |
| * on multiple CPUs specify them via a CPU list. A CPU list is an |
| * array in real memory, of which each 16-bit word is a CPU ID. CPU |
| * lists are passed through the API as two arguments. The first is |
| * the number of entries (16-bit words) in the CPU list, and the |
| * second is the (real address) pointer to the CPU ID list. |
| */ |
| |
| /* cpu_start() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_START |
| * ARG0: CPU ID |
| * ARG1: PC |
| * ARG1: RTBA |
| * ARG1: target ARG0 |
| * RET0: status |
| * ERRORS: ENOCPU Invalid CPU ID |
| * EINVAL Target CPU ID is not in the stopped state |
| * ENORADDR Invalid PC or RTBA real address |
| * EBADALIGN Unaligned PC or unaligned RTBA |
| * EWOULDBLOCK Starting resources are not available |
| * |
| * Start CPU with given CPU ID with PC in %pc and with a real trap |
| * base address value of RTBA. The indicated CPU must be in the |
| * stopped state. The supplied RTBA must be aligned on a 256 byte |
| * boundary. On successful completion, the specified CPU will be in |
| * the running state and will be supplied with "target ARG0" in %o0 |
| * and RTBA in %tba. |
| */ |
| #define HV_FAST_CPU_START 0x10 |
| |
| /* cpu_stop() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_STOP |
| * ARG0: CPU ID |
| * RET0: status |
| * ERRORS: ENOCPU Invalid CPU ID |
| * EINVAL Target CPU ID is the current cpu |
| * EINVAL Target CPU ID is not in the running state |
| * EWOULDBLOCK Stopping resources are not available |
| * ENOTSUPPORTED Not supported on this platform |
| * |
| * The specified CPU is stopped. The indicated CPU must be in the |
| * running state. On completion, it will be in the stopped state. It |
| * is not legal to stop the current CPU. |
| * |
| * Note: As this service cannot be used to stop the current cpu, this service |
| * may not be used to stop the last running CPU in a domain. To stop |
| * and exit a running domain, a guest must use the mach_exit() service. |
| */ |
| #define HV_FAST_CPU_STOP 0x11 |
| |
| /* cpu_yield() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_YIELD |
| * RET0: status |
| * ERRORS: No possible error. |
| * |
| * Suspend execution on the current CPU. Execution will resume when |
| * an interrupt (device, %stick_compare, or cross-call) is targeted to |
| * the CPU. On some CPUs, this API may be used by the hypervisor to |
| * save power by disabling hardware strands. |
| */ |
| #define HV_FAST_CPU_YIELD 0x12 |
| |
| |
| /* cpu_qconf() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_QCONF |
| * ARG0: queue |
| * ARG1: base real address |
| * ARG2: number of entries |
| * RET0: status |
| * ERRORS: ENORADDR Invalid base real address |
| * EINVAL Invalid queue or number of entries is less |
| * than 2 or too large. |
| * EBADALIGN Base real address is not correctly aligned |
| * for size. |
| * |
| * Configure the given queue to be placed at the givem base real |
| * address, with the given number of entries. The number of entries |
| * must be a power of 2. The base real address must be aligned |
| * exactly to match the queue size. Each queue entry is 64 bytes |
| * long, so for example a 32 entry queue must be aligned on a 2048 |
| * byte real address boundary. |
| * |
| * The specified queue is unconfigured is number of entries is given as zero. |
| * |
| * For the current version of this API service, the argument queue is defined |
| * as follows: |
| * queue description |
| * ----- ------------------------- |
| * 0x3c cpu mondo queue |
| * 0x3d device mondo queue |
| * 0x3e resumable error queue |
| * 0x3f non-resumable error queue |
| * |
| * Note: The maximum number of entries for each queue for a specific cpu may |
| * be determined from the machine description. |
| */ |
| #define HV_FAST_CPU_QCONF 0x14 |
| #define HV_CPU_QUEUE_CPU_MONDO 0x3c |
| #define HV_CPU_QUEUE_DEVICE_MONDO 0x3d |
| #define HV_CPU_QUEUE_RES_ERROR 0x3e |
| #define HV_CPU_QUEUE_NONRES_ERROR 0x3f |
| |
| /* cpu_qinfo() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_QINFO |
| * ARG0: queue |
| * RET0: status |
| * RET1: base real address |
| * RET1: number of entries |
| * ERRORS: EINVAL Invalid queue |
| * |
| * Return the configuration info for the given queue. The base real |
| * address and number of entries of the defined queue are returned. |
| * The queue argument values are the same as for cpu_qconf() above. |
| * |
| * If the specified queue is a valid queue number, but no queue has |
| * been defined, the number of entries will be set to zero and the |
| * base real address returned is undefined. |
| */ |
| #define HV_FAST_CPU_QINFO 0x15 |
| |
| /* cpu_mondo_send() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_MONDO_SEND |
| * ARG0-1: CPU list |
| * ARG2: data real address |
| * RET0: status |
| * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list |
| * is not 2-byte aligned. |
| * ENORADDR Invalid data mondo address, or invalid cpu list |
| * address. |
| * ENOCPU Invalid cpu in CPU list |
| * EWOULDBLOCK Some or all of the listed CPUs did not receive |
| * the mondo |
| * EINVAL CPU list includes caller's CPU ID |
| * |
| * Send a mondo interrupt to the CPUs in the given CPU list with the |
| * 64-bytes at the given data real address. The data must be 64-byte |
| * aligned. The mondo data will be delivered to the cpu_mondo queues |
| * of the recipient CPUs. |
| * |
| * In all cases, error or not, the CPUs in the CPU list to which the |
| * mondo has been successfully delivered will be indicated by having |
| * their entry in CPU list updated with the value 0xffff. |
| */ |
| #define HV_FAST_CPU_MONDO_SEND 0x42 |
| |
| /* cpu_myid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_MYID |
| * RET0: status |
| * RET1: CPU ID |
| * ERRORS: No errors defined. |
| * |
| * Return the hypervisor ID handle for the current CPU. Use by a |
| * virtual CPU to discover it's own identity. |
| */ |
| #define HV_FAST_CPU_MYID 0x16 |
| |
| /* cpu_state() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_STATE |
| * ARG0: CPU ID |
| * RET0: status |
| * RET1: state |
| * ERRORS: ENOCPU Invalid CPU ID |
| * |
| * Retrieve the current state of the CPU with the given CPU ID. |
| */ |
| #define HV_FAST_CPU_STATE 0x17 |
| #define HV_CPU_STATE_STOPPED 0x01 |
| #define HV_CPU_STATE_RUNNING 0x02 |
| #define HV_CPU_STATE_ERROR 0x03 |
| |
| /* cpu_set_rtba() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_SET_RTBA |
| * ARG0: RTBA |
| * RET0: status |
| * RET1: previous RTBA |
| * ERRORS: ENORADDR Invalid RTBA real address |
| * EBADALIGN RTBA is incorrectly aligned for a trap table |
| * |
| * Set the real trap base address of the local cpu to the given RTBA. |
| * The supplied RTBA must be aligned on a 256 byte boundary. Upon |
| * success the previous value of the RTBA is returned in RET1. |
| * |
| * Note: This service does not affect %tba |
| */ |
| #define HV_FAST_CPU_SET_RTBA 0x18 |
| |
| /* cpu_set_rtba() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CPU_GET_RTBA |
| * RET0: status |
| * RET1: previous RTBA |
| * ERRORS: No possible error. |
| * |
| * Returns the current value of RTBA in RET1. |
| */ |
| #define HV_FAST_CPU_GET_RTBA 0x19 |
| |
| /* MMU services. |
| * |
| * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. |
| */ |
| #ifndef __ASSEMBLY__ |
| struct hv_tsb_descr { |
| unsigned short pgsz_idx; |
| unsigned short assoc; |
| unsigned int num_ttes; /* in TTEs */ |
| unsigned int ctx_idx; |
| unsigned int pgsz_mask; |
| unsigned long tsb_base; |
| unsigned long resv; |
| }; |
| #endif |
| #define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 |
| #define HV_TSB_DESCR_ASSOC_OFFSET 0x02 |
| #define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 |
| #define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 |
| #define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c |
| #define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 |
| #define HV_TSB_DESCR_RESV_OFFSET 0x18 |
| |
| /* Page size bitmask. */ |
| #define HV_PGSZ_MASK_8K (1 << 0) |
| #define HV_PGSZ_MASK_64K (1 << 1) |
| #define HV_PGSZ_MASK_512K (1 << 2) |
| #define HV_PGSZ_MASK_4MB (1 << 3) |
| #define HV_PGSZ_MASK_32MB (1 << 4) |
| #define HV_PGSZ_MASK_256MB (1 << 5) |
| #define HV_PGSZ_MASK_2GB (1 << 6) |
| #define HV_PGSZ_MASK_16GB (1 << 7) |
| |
| /* Page size index. The value given in the TSB descriptor must correspond |
| * to the smallest page size specified in the pgsz_mask page size bitmask. |
| */ |
| #define HV_PGSZ_IDX_8K 0 |
| #define HV_PGSZ_IDX_64K 1 |
| #define HV_PGSZ_IDX_512K 2 |
| #define HV_PGSZ_IDX_4MB 3 |
| #define HV_PGSZ_IDX_32MB 4 |
| #define HV_PGSZ_IDX_256MB 5 |
| #define HV_PGSZ_IDX_2GB 6 |
| #define HV_PGSZ_IDX_16GB 7 |
| |
| /* MMU fault status area. |
| * |
| * MMU related faults have their status and fault address information |
| * placed into a memory region made available by privileged code. Each |
| * virtual processor must make a mmu_fault_area_conf() call to tell the |
| * hypervisor where that processor's fault status should be stored. |
| * |
| * The fault status block is a multiple of 64-bytes and must be aligned |
| * on a 64-byte boundary. |
| */ |
| #ifndef __ASSEMBLY__ |
| struct hv_fault_status { |
| unsigned long i_fault_type; |
| unsigned long i_fault_addr; |
| unsigned long i_fault_ctx; |
| unsigned long i_reserved[5]; |
| unsigned long d_fault_type; |
| unsigned long d_fault_addr; |
| unsigned long d_fault_ctx; |
| unsigned long d_reserved[5]; |
| }; |
| #endif |
| #define HV_FAULT_I_TYPE_OFFSET 0x00 |
| #define HV_FAULT_I_ADDR_OFFSET 0x08 |
| #define HV_FAULT_I_CTX_OFFSET 0x10 |
| #define HV_FAULT_D_TYPE_OFFSET 0x40 |
| #define HV_FAULT_D_ADDR_OFFSET 0x48 |
| #define HV_FAULT_D_CTX_OFFSET 0x50 |
| |
| #define HV_FAULT_TYPE_FAST_MISS 1 |
| #define HV_FAULT_TYPE_FAST_PROT 2 |
| #define HV_FAULT_TYPE_MMU_MISS 3 |
| #define HV_FAULT_TYPE_INV_RA 4 |
| #define HV_FAULT_TYPE_PRIV_VIOL 5 |
| #define HV_FAULT_TYPE_PROT_VIOL 6 |
| #define HV_FAULT_TYPE_NFO 7 |
| #define HV_FAULT_TYPE_NFO_SEFF 8 |
| #define HV_FAULT_TYPE_INV_VA 9 |
| #define HV_FAULT_TYPE_INV_ASI 10 |
| #define HV_FAULT_TYPE_NC_ATOMIC 11 |
| #define HV_FAULT_TYPE_PRIV_ACT 12 |
| #define HV_FAULT_TYPE_RESV1 13 |
| #define HV_FAULT_TYPE_UNALIGNED 14 |
| #define HV_FAULT_TYPE_INV_PGSZ 15 |
| /* Values 16 --> -2 are reserved. */ |
| #define HV_FAULT_TYPE_MULTIPLE -1 |
| |
| /* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), |
| * and mmu_{map,unmap}_perm_addr(). |
| */ |
| #define HV_MMU_DMMU 0x01 |
| #define HV_MMU_IMMU 0x02 |
| #define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) |
| |
| /* mmu_map_addr() |
| * TRAP: HV_MMU_MAP_ADDR_TRAP |
| * ARG0: virtual address |
| * ARG1: mmu context |
| * ARG2: TTE |
| * ARG3: flags (HV_MMU_{IMMU,DMMU}) |
| * ERRORS: EINVAL Invalid virtual address, mmu context, or flags |
| * EBADPGSZ Invalid page size value |
| * ENORADDR Invalid real address in TTE |
| * |
| * Create a non-permanent mapping using the given TTE, virtual |
| * address, and mmu context. The flags argument determines which |
| * (data, or instruction, or both) TLB the mapping gets loaded into. |
| * |
| * The behavior is undefined if the valid bit is clear in the TTE. |
| * |
| * Note: This API call is for privileged code to specify temporary translation |
| * mappings without the need to create and manage a TSB. |
| */ |
| |
| /* mmu_unmap_addr() |
| * TRAP: HV_MMU_UNMAP_ADDR_TRAP |
| * ARG0: virtual address |
| * ARG1: mmu context |
| * ARG2: flags (HV_MMU_{IMMU,DMMU}) |
| * ERRORS: EINVAL Invalid virtual address, mmu context, or flags |
| * |
| * Demaps the given virtual address in the given mmu context on this |
| * CPU. This function is intended to be used to demap pages mapped |
| * with mmu_map_addr. This service is equivalent to invoking |
| * mmu_demap_page() with only the current CPU in the CPU list. The |
| * flags argument determines which (data, or instruction, or both) TLB |
| * the mapping gets unmapped from. |
| * |
| * Attempting to perform an unmap operation for a previously defined |
| * permanent mapping will have undefined results. |
| */ |
| |
| /* mmu_tsb_ctx0() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_TSB_CTX0 |
| * ARG0: number of TSB descriptions |
| * ARG1: TSB descriptions pointer |
| * RET0: status |
| * ERRORS: ENORADDR Invalid TSB descriptions pointer or |
| * TSB base within a descriptor |
| * EBADALIGN TSB descriptions pointer is not aligned |
| * to an 8-byte boundary, or TSB base |
| * within a descriptor is not aligned for |
| * the given TSB size |
| * EBADPGSZ Invalid page size in a TSB descriptor |
| * EBADTSB Invalid associativity or size in a TSB |
| * descriptor |
| * EINVAL Invalid number of TSB descriptions, or |
| * invalid context index in a TSB |
| * descriptor, or index page size not |
| * equal to smallest page size in page |
| * size bitmask field. |
| * |
| * Configures the TSBs for the current CPU for virtual addresses with |
| * context zero. The TSB descriptions pointer is a pointer to an |
| * array of the given number of TSB descriptions. |
| * |
| * Note: The maximum number of TSBs available to a virtual CPU is given by the |
| * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the |
| * machine description. |
| */ |
| #define HV_FAST_MMU_TSB_CTX0 0x20 |
| |
| /* mmu_tsb_ctxnon0() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 |
| * ARG0: number of TSB descriptions |
| * ARG1: TSB descriptions pointer |
| * RET0: status |
| * ERRORS: Same as for mmu_tsb_ctx0() above. |
| * |
| * Configures the TSBs for the current CPU for virtual addresses with |
| * non-zero contexts. The TSB descriptions pointer is a pointer to an |
| * array of the given number of TSB descriptions. |
| * |
| * Note: A maximum of 16 TSBs may be specified in the TSB description list. |
| */ |
| #define HV_FAST_MMU_TSB_CTXNON0 0x21 |
| |
| /* mmu_demap_page() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_DEMAP_PAGE |
| * ARG0: reserved, must be zero |
| * ARG1: reserved, must be zero |
| * ARG2: virtual address |
| * ARG3: mmu context |
| * ARG4: flags (HV_MMU_{IMMU,DMMU}) |
| * RET0: status |
| * ERRORS: EINVAL Invalid virutal address, context, or |
| * flags value |
| * ENOTSUPPORTED ARG0 or ARG1 is non-zero |
| * |
| * Demaps any page mapping of the given virtual address in the given |
| * mmu context for the current virtual CPU. Any virtually tagged |
| * caches are guaranteed to be kept consistent. The flags argument |
| * determines which TLB (instruction, or data, or both) participate in |
| * the operation. |
| * |
| * ARG0 and ARG1 are both reserved and must be set to zero. |
| */ |
| #define HV_FAST_MMU_DEMAP_PAGE 0x22 |
| |
| /* mmu_demap_ctx() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_DEMAP_CTX |
| * ARG0: reserved, must be zero |
| * ARG1: reserved, must be zero |
| * ARG2: mmu context |
| * ARG3: flags (HV_MMU_{IMMU,DMMU}) |
| * RET0: status |
| * ERRORS: EINVAL Invalid context or flags value |
| * ENOTSUPPORTED ARG0 or ARG1 is non-zero |
| * |
| * Demaps all non-permanent virtual page mappings previously specified |
| * for the given context for the current virtual CPU. Any virtual |
| * tagged caches are guaranteed to be kept consistent. The flags |
| * argument determines which TLB (instruction, or data, or both) |
| * participate in the operation. |
| * |
| * ARG0 and ARG1 are both reserved and must be set to zero. |
| */ |
| #define HV_FAST_MMU_DEMAP_CTX 0x23 |
| |
| /* mmu_demap_all() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_DEMAP_ALL |
| * ARG0: reserved, must be zero |
| * ARG1: reserved, must be zero |
| * ARG2: flags (HV_MMU_{IMMU,DMMU}) |
| * RET0: status |
| * ERRORS: EINVAL Invalid flags value |
| * ENOTSUPPORTED ARG0 or ARG1 is non-zero |
| * |
| * Demaps all non-permanent virtual page mappings previously specified |
| * for the current virtual CPU. Any virtual tagged caches are |
| * guaranteed to be kept consistent. The flags argument determines |
| * which TLB (instruction, or data, or both) participate in the |
| * operation. |
| * |
| * ARG0 and ARG1 are both reserved and must be set to zero. |
| */ |
| #define HV_FAST_MMU_DEMAP_ALL 0x24 |
| |
| /* mmu_map_perm_addr() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR |
| * ARG0: virtual address |
| * ARG1: reserved, must be zero |
| * ARG2: TTE |
| * ARG3: flags (HV_MMU_{IMMU,DMMU}) |
| * RET0: status |
| * ERRORS: EINVAL Invalid virutal address or flags value |
| * EBADPGSZ Invalid page size value |
| * ENORADDR Invalid real address in TTE |
| * ETOOMANY Too many mappings (max of 8 reached) |
| * |
| * Create a permanent mapping using the given TTE and virtual address |
| * for context 0 on the calling virtual CPU. A maximum of 8 such |
| * permanent mappings may be specified by privileged code. Mappings |
| * may be removed with mmu_unmap_perm_addr(). |
| * |
| * The behavior is undefined if a TTE with the valid bit clear is given. |
| * |
| * Note: This call is used to specify address space mappings for which |
| * privileged code does not expect to receive misses. For example, |
| * this mechanism can be used to map kernel nucleus code and data. |
| */ |
| #define HV_FAST_MMU_MAP_PERM_ADDR 0x25 |
| |
| /* mmu_fault_area_conf() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF |
| * ARG0: real address |
| * RET0: status |
| * RET1: previous mmu fault area real address |
| * ERRORS: ENORADDR Invalid real address |
| * EBADALIGN Invalid alignment for fault area |
| * |
| * Configure the MMU fault status area for the calling CPU. A 64-byte |
| * aligned real address specifies where MMU fault status information |
| * is placed. The return value is the previously specified area, or 0 |
| * for the first invocation. Specifying a fault area at real address |
| * 0 is not allowed. |
| */ |
| #define HV_FAST_MMU_FAULT_AREA_CONF 0x26 |
| |
| /* mmu_enable() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_ENABLE |
| * ARG0: enable flag |
| * ARG1: return target address |
| * RET0: status |
| * ERRORS: ENORADDR Invalid real address when disabling |
| * translation. |
| * EBADALIGN The return target address is not |
| * aligned to an instruction. |
| * EINVAL The enable flag request the current |
| * operating mode (e.g. disable if already |
| * disabled) |
| * |
| * Enable or disable virtual address translation for the calling CPU |
| * within the virtual machine domain. If the enable flag is zero, |
| * translation is disabled, any non-zero value will enable |
| * translation. |
| * |
| * When this function returns, the newly selected translation mode |
| * will be active. If the mmu is being enabled, then the return |
| * target address is a virtual address else it is a real address. |
| * |
| * Upon successful completion, control will be returned to the given |
| * return target address (ie. the cpu will jump to that address). On |
| * failure, the previous mmu mode remains and the trap simply returns |
| * as normal with the appropriate error code in RET0. |
| */ |
| #define HV_FAST_MMU_ENABLE 0x27 |
| |
| /* mmu_unmap_perm_addr() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR |
| * ARG0: virtual address |
| * ARG1: reserved, must be zero |
| * ARG2: flags (HV_MMU_{IMMU,DMMU}) |
| * RET0: status |
| * ERRORS: EINVAL Invalid virutal address or flags value |
| * ENOMAP Specified mapping was not found |
| * |
| * Demaps any permanent page mapping (established via |
| * mmu_map_perm_addr()) at the given virtual address for context 0 on |
| * the current virtual CPU. Any virtual tagged caches are guaranteed |
| * to be kept consistent. |
| */ |
| #define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 |
| |
| /* mmu_tsb_ctx0_info() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO |
| * ARG0: max TSBs |
| * ARG1: buffer pointer |
| * RET0: status |
| * RET1: number of TSBs |
| * ERRORS: EINVAL Supplied buffer is too small |
| * EBADALIGN The buffer pointer is badly aligned |
| * ENORADDR Invalid real address for buffer pointer |
| * |
| * Return the TSB configuration as previous defined by mmu_tsb_ctx0() |
| * into the provided buffer. The size of the buffer is given in ARG1 |
| * in terms of the number of TSB description entries. |
| * |
| * Upon return, RET1 always contains the number of TSB descriptions |
| * previously configured. If zero TSBs were configured, EOK is |
| * returned with RET1 containing 0. |
| */ |
| #define HV_FAST_MMU_TSB_CTX0_INFO 0x29 |
| |
| /* mmu_tsb_ctxnon0_info() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO |
| * ARG0: max TSBs |
| * ARG1: buffer pointer |
| * RET0: status |
| * RET1: number of TSBs |
| * ERRORS: EINVAL Supplied buffer is too small |
| * EBADALIGN The buffer pointer is badly aligned |
| * ENORADDR Invalid real address for buffer pointer |
| * |
| * Return the TSB configuration as previous defined by |
| * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer |
| * is given in ARG1 in terms of the number of TSB description entries. |
| * |
| * Upon return, RET1 always contains the number of TSB descriptions |
| * previously configured. If zero TSBs were configured, EOK is |
| * returned with RET1 containing 0. |
| */ |
| #define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a |
| |
| /* mmu_fault_area_info() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO |
| * RET0: status |
| * RET1: fault area real address |
| * ERRORS: No errors defined. |
| * |
| * Return the currently defined MMU fault status area for the current |
| * CPU. The real address of the fault status area is returned in |
| * RET1, or 0 is returned in RET1 if no fault status area is defined. |
| * |
| * Note: mmu_fault_area_conf() may be called with the return value (RET1) |
| * from this service if there is a need to save and restore the fault |
| * area for a cpu. |
| */ |
| #define HV_FAST_MMU_FAULT_AREA_INFO 0x2b |
| |
| /* Cache and Memory services. */ |
| |
| /* mem_scrub() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MEM_SCRUB |
| * ARG0: real address |
| * ARG1: length |
| * RET0: status |
| * RET1: length scrubbed |
| * ERRORS: ENORADDR Invalid real address |
| * EBADALIGN Start address or length are not correctly |
| * aligned |
| * EINVAL Length is zero |
| * |
| * Zero the memory contents in the range real address to real address |
| * plus length minus 1. Also, valid ECC will be generated for that |
| * memory address range. Scrubbing is started at the given real |
| * address, but may not scrub the entire given length. The actual |
| * length scrubbed will be returned in RET1. |
| * |
| * The real address and length must be aligned on an 8K boundary, or |
| * contain the start address and length from a sun4v error report. |
| * |
| * Note: There are two uses for this function. The first use is to block clear |
| * and initialize memory and the second is to scrub an u ncorrectable |
| * error reported via a resumable or non-resumable trap. The second |
| * use requires the arguments to be equal to the real address and length |
| * provided in a sun4v memory error report. |
| */ |
| #define HV_FAST_MEM_SCRUB 0x31 |
| |
| /* mem_sync() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MEM_SYNC |
| * ARG0: real address |
| * ARG1: length |
| * RET0: status |
| * RET1: length synced |
| * ERRORS: ENORADDR Invalid real address |
| * EBADALIGN Start address or length are not correctly |
| * aligned |
| * EINVAL Length is zero |
| * |
| * Force the next access within the real address to real address plus |
| * length minus 1 to be fetches from main system memory. Less than |
| * the given length may be synced, the actual amount synced is |
| * returned in RET1. The real address and length must be aligned on |
| * an 8K boundary. |
| */ |
| #define HV_FAST_MEM_SYNC 0x32 |
| |
| /* Time of day services. |
| * |
| * The hypervisor maintains the time of day on a per-domain basis. |
| * Changing the time of day in one domain does not affect the time of |
| * day on any other domain. |
| * |
| * Time is described by a single unsigned 64-bit word which is the |
| * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, |
| * 1970). |
| */ |
| |
| /* tod_get() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_TOD_GET |
| * RET0: status |
| * RET1: TOD |
| * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable |
| * ENOTSUPPORTED If TOD not supported on this platform |
| * |
| * Return the current time of day. May block if TOD access is |
| * temporarily not possible. |
| */ |
| #define HV_FAST_TOD_GET 0x50 |
| |
| /* tod_set() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_TOD_SET |
| * ARG0: TOD |
| * RET0: status |
| * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable |
| * ENOTSUPPORTED If TOD not supported on this platform |
| * |
| * The current time of day is set to the value specified in ARG0. May |
| * block if TOD access is temporarily not possible. |
| */ |
| #define HV_FAST_TOD_SET 0x51 |
| |
| /* Console services */ |
| |
| /* con_getchar() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CONS_GETCHAR |
| * RET0: status |
| * RET1: character |
| * ERRORS: EWOULDBLOCK No character available. |
| * |
| * Returns a character from the console device. If no character is |
| * available then an EWOULDBLOCK error is returned. If a character is |
| * available, then the returned status is EOK and the character value |
| * is in RET1. |
| * |
| * A virtual BREAK is represented by the 64-bit value -1. |
| * |
| * A virtual HUP signal is represented by the 64-bit value -2. |
| */ |
| #define HV_FAST_CONS_GETCHAR 0x60 |
| |
| /* con_putchar() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_CONS_PUTCHAR |
| * ARG0: character |
| * RET0: status |
| * ERRORS: EINVAL Illegal character |
| * EWOULDBLOCK Output buffer currentl full, would block |
| * |
| * Send a character to the console device. Only character values |
| * between 0 and 255 may be used. Values outside this range are |
| * invalid except for the 64-bit value -1 which is used to send a |
| * virtual BREAK. |
| */ |
| #define HV_FAST_CONS_PUTCHAR 0x61 |
| |
| /* Trap trace services. |
| * |
| * The hypervisor provides a trap tracing capability for privileged |
| * code running on each virtual CPU. Privileged code provides a |
| * round-robin trap trace queue within which the hypervisor writes |
| * 64-byte entries detailing hyperprivileged traps taken n behalf of |
| * privileged code. This is provided as a debugging capability for |
| * privileged code. |
| * |
| * The trap trace control structure is 64-bytes long and placed at the |
| * start (offset 0) of the trap trace buffer, and is described as |
| * follows: |
| */ |
| #ifndef __ASSEMBLY__ |
| struct hv_trap_trace_control { |
| unsigned long head_offset; |
| unsigned long tail_offset; |
| unsigned long __reserved[0x30 / sizeof(unsigned long)]; |
| }; |
| #endif |
| #define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 |
| #define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 |
| |
| /* The head offset is the offset of the most recently completed entry |
| * in the trap-trace buffer. The tail offset is the offset of the |
| * next entry to be written. The control structure is owned and |
| * modified by the hypervisor. A guest may not modify the control |
| * structure contents. Attempts to do so will result in undefined |
| * behavior for the guest. |
| * |
| * Each trap trace buffer entry is layed out as follows: |
| */ |
| #ifndef __ASSEMBLY__ |
| struct hv_trap_trace_entry { |
| unsigned char type; /* Hypervisor or guest entry? */ |
| unsigned char hpstate; /* Hyper-privileged state */ |
| unsigned char tl; /* Trap level */ |
| unsigned char gl; /* Global register level */ |
| unsigned short tt; /* Trap type */ |
| unsigned short tag; /* Extended trap identifier */ |
| unsigned long tstate; /* Trap state */ |
| unsigned long tick; /* Tick */ |
| unsigned long tpc; /* Trap PC */ |
| unsigned long f1; /* Entry specific */ |
| unsigned long f2; /* Entry specific */ |
| unsigned long f3; /* Entry specific */ |
| unsigned long f4; /* Entry specific */ |
| }; |
| #endif |
| #define HV_TRAP_TRACE_ENTRY_TYPE 0x00 |
| #define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 |
| #define HV_TRAP_TRACE_ENTRY_TL 0x02 |
| #define HV_TRAP_TRACE_ENTRY_GL 0x03 |
| #define HV_TRAP_TRACE_ENTRY_TT 0x04 |
| #define HV_TRAP_TRACE_ENTRY_TAG 0x06 |
| #define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 |
| #define HV_TRAP_TRACE_ENTRY_TICK 0x10 |
| #define HV_TRAP_TRACE_ENTRY_TPC 0x18 |
| #define HV_TRAP_TRACE_ENTRY_F1 0x20 |
| #define HV_TRAP_TRACE_ENTRY_F2 0x28 |
| #define HV_TRAP_TRACE_ENTRY_F3 0x30 |
| #define HV_TRAP_TRACE_ENTRY_F4 0x38 |
| |
| /* The type field is encoded as follows. */ |
| #define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ |
| #define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ |
| #define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ |
| |
| /* ttrace_buf_conf() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_TTRACE_BUF_CONF |
| * ARG0: real address |
| * ARG1: number of entries |
| * RET0: status |
| * RET1: number of entries |
| * ERRORS: ENORADDR Invalid real address |
| * EINVAL Size is too small |
| * EBADALIGN Real address not aligned on 64-byte boundary |
| * |
| * Requests hypervisor trap tracing and declares a virtual CPU's trap |
| * trace buffer to the hypervisor. The real address supplies the real |
| * base address of the trap trace queue and must be 64-byte aligned. |
| * Specifying a value of 0 for the number of entries disables trap |
| * tracing for the calling virtual CPU. The buffer allocated must be |
| * sized for a power of two number of 64-byte trap trace entries plus |
| * an initial 64-byte control structure. |
| * |
| * This may be invoked any number of times so that a virtual CPU may |
| * relocate a trap trace buffer or create "snapshots" of information. |
| * |
| * If the real address is illegal or badly aligned, then trap tracing |
| * is disabled and an error is returned. |
| * |
| * Upon failure with EINVAL, this service call returns in RET1 the |
| * minimum number of buffer entries required. Upon other failures |
| * RET1 is undefined. |
| */ |
| #define HV_FAST_TTRACE_BUF_CONF 0x90 |
| |
| /* ttrace_buf_info() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_TTRACE_BUF_INFO |
| * RET0: status |
| * RET1: real address |
| * RET2: size |
| * ERRORS: None defined. |
| * |
| * Returns the size and location of the previously declared trap-trace |
| * buffer. In the event that no buffer was previously defined, or the |
| * buffer is disabled, this call will return a size of zero bytes. |
| */ |
| #define HV_FAST_TTRACE_BUF_INFO 0x91 |
| |
| /* ttrace_enable() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_TTRACE_ENABLE |
| * ARG0: enable |
| * RET0: status |
| * RET1: previous enable state |
| * ERRORS: EINVAL No trap trace buffer currently defined |
| * |
| * Enable or disable trap tracing, and return the previous enabled |
| * state in RET1. Future systems may define various flags for the |
| * enable argument (ARG0), for the moment a guest should pass |
| * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all |
| * tracing - which will ensure future compatability. |
| */ |
| #define HV_FAST_TTRACE_ENABLE 0x92 |
| |
| /* ttrace_freeze() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_TTRACE_FREEZE |
| * ARG0: freeze |
| * RET0: status |
| * RET1: previous freeze state |
| * ERRORS: EINVAL No trap trace buffer currently defined |
| * |
| * Freeze or unfreeze trap tracing, returning the previous freeze |
| * state in RET1. A guest should pass a non-zero value to freeze and |
| * a zero value to unfreeze all tracing. The returned previous state |
| * is 0 for not frozen and 1 for frozen. |
| */ |
| #define HV_FAST_TTRACE_FREEZE 0x93 |
| |
| /* ttrace_addentry() |
| * TRAP: HV_TTRACE_ADDENTRY_TRAP |
| * ARG0: tag (16-bits) |
| * ARG1: data word 0 |
| * ARG2: data word 1 |
| * ARG3: data word 2 |
| * ARG4: data word 3 |
| * RET0: status |
| * ERRORS: EINVAL No trap trace buffer currently defined |
| * |
| * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 |
| * is modified - none of the other registers holding arguments are |
| * volatile across this hypervisor service. |
| */ |
| |
| /* Core dump services. |
| * |
| * Since the hypervisor viraulizes and thus obscures a lot of the |
| * physical machine layout and state, traditional OS crash dumps can |
| * be difficult to diagnose especially when the problem is a |
| * configuration error of some sort. |
| * |
| * The dump services provide an opaque buffer into which the |
| * hypervisor can place it's internal state in order to assist in |
| * debugging such situations. The contents are opaque and extremely |
| * platform and hypervisor implementation specific. The guest, during |
| * a core dump, requests that the hypervisor update any information in |
| * the dump buffer in preparation to being dumped as part of the |
| * domain's memory image. |
| */ |
| |
| /* dump_buf_update() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_DUMP_BUF_UPDATE |
| * ARG0: real address |
| * ARG1: size |
| * RET0: status |
| * RET1: required size of dump buffer |
| * ERRORS: ENORADDR Invalid real address |
| * EBADALIGN Real address is not aligned on a 64-byte |
| * boundary |
| * EINVAL Size is non-zero but less than minimum size |
| * required |
| * ENOTSUPPORTED Operation not supported on current logical |
| * domain |
| * |
| * Declare a domain dump buffer to the hypervisor. The real address |
| * provided for the domain dump buffer must be 64-byte aligned. The |
| * size specifies the size of the dump buffer and may be larger than |
| * the minimum size specified in the machine description. The |
| * hypervisor will fill the dump buffer with opaque data. |
| * |
| * Note: A guest may elect to include dump buffer contents as part of a crash |
| * dump to assist with debugging. This function may be called any number |
| * of times so that a guest may relocate a dump buffer, or create |
| * "snapshots" of any dump-buffer information. Each call to |
| * dump_buf_update() atomically declares the new dump buffer to the |
| * hypervisor. |
| * |
| * A specified size of 0 unconfigures the dump buffer. If the real |
| * address is illegal or badly aligned, then any currently active dump |
| * buffer is disabled and an error is returned. |
| * |
| * In the event that the call fails with EINVAL, RET1 contains the |
| * minimum size requires by the hypervisor for a valid dump buffer. |
| */ |
| #define HV_FAST_DUMP_BUF_UPDATE 0x94 |
| |
| /* dump_buf_info() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_DUMP_BUF_INFO |
| * RET0: status |
| * RET1: real address of current dump buffer |
| * RET2: size of current dump buffer |
| * ERRORS: No errors defined. |
| * |
| * Return the currently configures dump buffer description. A |
| * returned size of 0 bytes indicates an undefined dump buffer. In |
| * this case the return address in RET1 is undefined. |
| */ |
| #define HV_FAST_DUMP_BUF_INFO 0x95 |
| |
| /* Device interrupt services. |
| * |
| * Device interrupts are allocated to system bus bridges by the hypervisor, |
| * and described to OBP in the machine description. OBP then describes |
| * these interrupts to the OS via properties in the device tree. |
| * |
| * Terminology: |
| * |
| * cpuid Unique opaque value which represents a target cpu. |
| * |
| * devhandle Device handle. It uniquely identifies a device, and |
| * consistes of the lower 28-bits of the hi-cell of the |
| * first entry of the device's "reg" property in the |
| * OBP device tree. |
| * |
| * devino Device interrupt number. Specifies the relative |
| * interrupt number within the device. The unique |
| * combination of devhandle and devino are used to |
| * identify a specific device interrupt. |
| * |
| * Note: The devino value is the same as the values in the |
| * "interrupts" property or "interrupt-map" property |
| * in the OBP device tree for that device. |
| * |
| * sysino System interrupt number. A 64-bit unsigned interger |
| * representing a unique interrupt within a virtual |
| * machine. |
| * |
| * intr_state A flag representing the interrupt state for a given |
| * sysino. The state values are defined below. |
| * |
| * intr_enabled A flag representing the 'enabled' state for a given |
| * sysino. The enable values are defined below. |
| */ |
| |
| #define HV_INTR_STATE_IDLE 0 /* Nothing pending */ |
| #define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ |
| #define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ |
| |
| #define HV_INTR_DISABLED 0 /* sysino not enabled */ |
| #define HV_INTR_ENABLED 1 /* sysino enabled */ |
| |
| /* intr_devino_to_sysino() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO |
| * ARG0: devhandle |
| * ARG1: devino |
| * RET0: status |
| * RET1: sysino |
| * ERRORS: EINVAL Invalid devhandle/devino |
| * |
| * Converts a device specific interrupt number of the given |
| * devhandle/devino into a system specific ino (sysino). |
| */ |
| #define HV_FAST_INTR_DEVINO2SYSINO 0xa0 |
| |
| /* intr_getenabled() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_INTR_GETENABLED |
| * ARG0: sysino |
| * RET0: status |
| * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) |
| * ERRORS: EINVAL Invalid sysino |
| * |
| * Returns interrupt enabled state in RET1 for the interrupt defined |
| * by the given sysino. |
| */ |
| #define HV_FAST_INTR_GETENABLED 0xa1 |
| |
| /* intr_setenabled() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_INTR_SETENABLED |
| * ARG0: sysino |
| * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) |
| * RET0: status |
| * ERRORS: EINVAL Invalid sysino or intr_enabled value |
| * |
| * Set the 'enabled' state of the interrupt sysino. |
| */ |
| #define HV_FAST_INTR_SETENABLED 0xa2 |
| |
| /* intr_getstate() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_INTR_GETSTATE |
| * ARG0: sysino |
| * RET0: status |
| * RET1: intr_state (HV_INTR_STATE_*) |
| * ERRORS: EINVAL Invalid sysino |
| * |
| * Returns current state of the interrupt defined by the given sysino. |
| */ |
| #define HV_FAST_INTR_GETSTATE 0xa3 |
| |
| /* intr_setstate() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_INTR_SETSTATE |
| * ARG0: sysino |
| * ARG1: intr_state (HV_INTR_STATE_*) |
| * RET0: status |
| * ERRORS: EINVAL Invalid sysino or intr_state value |
| * |
| * Sets the current state of the interrupt described by the given sysino |
| * value. |
| * |
| * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending |
| * interrupt for sysino. |
| */ |
| #define HV_FAST_INTR_SETSTATE 0xa4 |
| |
| /* intr_gettarget() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_INTR_GETTARGET |
| * ARG0: sysino |
| * RET0: status |
| * RET1: cpuid |
| * ERRORS: EINVAL Invalid sysino |
| * |
| * Returns CPU that is the current target of the interrupt defined by |
| * the given sysino. The CPU value returned is undefined if the target |
| * has not been set via intr_settarget(). |
| */ |
| #define HV_FAST_INTR_GETTARGET 0xa5 |
| |
| /* intr_settarget() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_INTR_SETTARGET |
| * ARG0: sysino |
| * ARG1: cpuid |
| * RET0: status |
| * ERRORS: EINVAL Invalid sysino |
| * ENOCPU Invalid cpuid |
| * |
| * Set the target CPU for the interrupt defined by the given sysino. |
| */ |
| #define HV_FAST_INTR_SETTARGET 0xa6 |
| |
| /* PCI IO services. |
| * |
| * See the terminology descriptions in the device interrupt services |
| * section above as those apply here too. Here are terminology |
| * definitions specific to these PCI IO services: |
| * |
| * tsbnum TSB number. Indentifies which io-tsb is used. |
| * For this version of the specification, tsbnum |
| * must be zero. |
| * |
| * tsbindex TSB index. Identifies which entry in the TSB |
| * is used. The first entry is zero. |
| * |
| * tsbid A 64-bit aligned data structure which contains |
| * a tsbnum and a tsbindex. Bits 63:32 contain the |
| * tsbnum and bits 31:00 contain the tsbindex. |
| * |
| * io_attributes IO attributes for IOMMU mappings. One of more |
| * of the attritbute bits are stores in a 64-bit |
| * value. The values are defined below. |
| * |
| * r_addr 64-bit real address |
| * |
| * pci_device PCI device address. A PCI device address identifies |
| * a specific device on a specific PCI bus segment. |
| * A PCI device address ia a 32-bit unsigned integer |
| * with the following format: |
| * |
| * 00000000.bbbbbbbb.dddddfff.00000000 |
| * |
| * Use the HV_PCI_DEVICE_BUILD() macro to construct |
| * such values. |
| * |
| * pci_config_offset |
| * PCI configureation space offset. For conventional |
| * PCI a value between 0 and 255. For extended |
| * configuration space, a value between 0 and 4095. |
| * |
| * Note: For PCI configuration space accesses, the offset |
| * must be aligned to the access size. |
| * |
| * error_flag A return value which specifies if the action succeeded |
| * or failed. 0 means no error, non-0 means some error |
| * occurred while performing the service. |
| * |
| * io_sync_direction |
| * Direction definition for pci_dma_sync(), defined |
| * below in HV_PCI_SYNC_*. |
| * |
| * io_page_list A list of io_page_addresses, an io_page_address is |
| * a real address. |
| * |
| * io_page_list_p A pointer to an io_page_list. |
| * |
| * "size based byte swap" - Some functions do size based byte swapping |
| * which allows sw to access pointers and |
| * counters in native form when the processor |
| * operates in a different endianness than the |
| * IO bus. Size-based byte swapping converts a |
| * multi-byte field between big-endian and |
| * little-endian format. |
| */ |
| |
| #define HV_PCI_MAP_ATTR_READ 0x01 |
| #define HV_PCI_MAP_ATTR_WRITE 0x02 |
| |
| #define HV_PCI_DEVICE_BUILD(b,d,f) \ |
| ((((b) & 0xff) << 16) | \ |
| (((d) & 0x1f) << 11) | \ |
| (((f) & 0x07) << 8)) |
| |
| #define HV_PCI_SYNC_FOR_DEVICE 0x01 |
| #define HV_PCI_SYNC_FOR_CPU 0x02 |
| |
| /* pci_iommu_map() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_IOMMU_MAP |
| * ARG0: devhandle |
| * ARG1: tsbid |
| * ARG2: #ttes |
| * ARG3: io_attributes |
| * ARG4: io_page_list_p |
| * RET0: status |
| * RET1: #ttes mapped |
| * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes |
| * EBADALIGN Improperly aligned real address |
| * ENORADDR Invalid real address |
| * |
| * Create IOMMU mappings in the sun4v device defined by the given |
| * devhandle. The mappings are created in the TSB defined by the |
| * tsbnum component of the given tsbid. The first mapping is created |
| * in the TSB i ndex defined by the tsbindex component of the given tsbid. |
| * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, |
| * the second at tsbnum, tsbindex + 1, etc. |
| * |
| * All mappings are created with the attributes defined by the io_attributes |
| * argument. The page mapping addresses are described in the io_page_list |
| * defined by the given io_page_list_p, which is a pointer to the io_page_list. |
| * The first entry in the io_page_list is the address for the first iotte, the |
| * 2nd for the 2nd iotte, and so on. |
| * |
| * Each io_page_address in the io_page_list must be appropriately aligned. |
| * #ttes must be greater than zero. For this version of the spec, the tsbnum |
| * component of the given tsbid must be zero. |
| * |
| * Returns the actual number of mappings creates, which may be less than |
| * or equal to the argument #ttes. If the function returns a value which |
| * is less than the #ttes, the caller may continus to call the function with |
| * an updated tsbid, #ttes, io_page_list_p arguments until all pages are |
| * mapped. |
| * |
| * Note: This function does not imply an iotte cache flush. The guest must |
| * demap an entry before re-mapping it. |
| */ |
| #define HV_FAST_PCI_IOMMU_MAP 0xb0 |
| |
| /* pci_iommu_demap() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP |
| * ARG0: devhandle |
| * ARG1: tsbid |
| * ARG2: #ttes |
| * RET0: status |
| * RET1: #ttes demapped |
| * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex |
| * |
| * Demap and flush IOMMU mappings in the device defined by the given |
| * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum |
| * component of the given tsbid, starting at the TSB index defined by the |
| * tsbindex component of the given tsbid. |
| * |
| * For this version of the spec, the tsbnum of the given tsbid must be zero. |
| * #ttes must be greater than zero. |
| * |
| * Returns the actual number of ttes demapped, which may be less than or equal |
| * to the argument #ttes. If #ttes demapped is less than #ttes, the caller |
| * may continue to call this function with updated tsbid and #ttes arguments |
| * until all pages are demapped. |
| * |
| * Note: Entries do not have to be mapped to be demapped. A demap of an |
| * unmapped page will flush the entry from the tte cache. |
| */ |
| #define HV_FAST_PCI_IOMMU_DEMAP 0xb1 |
| |
| /* pci_iommu_getmap() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP |
| * ARG0: devhandle |
| * ARG1: tsbid |
| * RET0: status |
| * RET1: io_attributes |
| * RET2: real address |
| * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex |
| * ENOMAP Mapping is not valid, no translation exists |
| * |
| * Read and return the mapping in the device described by the given devhandle |
| * and tsbid. If successful, the io_attributes shall be returned in RET1 |
| * and the page address of the mapping shall be returned in RET2. |
| * |
| * For this version of the spec, the tsbnum component of the given tsbid |
| * must be zero. |
| */ |
| #define HV_FAST_PCI_IOMMU_GETMAP 0xb2 |
| |
| /* pci_iommu_getbypass() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS |
| * ARG0: devhandle |
| * ARG1: real address |
| * ARG2: io_attributes |
| * RET0: status |
| * RET1: io_addr |
| * ERRORS: EINVAL Invalid devhandle/io_attributes |
| * ENORADDR Invalid real address |
| * ENOTSUPPORTED Function not supported in this implementation. |
| * |
| * Create a "special" mapping in the device described by the given devhandle, |
| * for the given real address and attributes. Return the IO address in RET1 |
| * if successful. |
| */ |
| #define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 |
| |
| /* pci_config_get() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_CONFIG_GET |
| * ARG0: devhandle |
| * ARG1: pci_device |
| * ARG2: pci_config_offset |
| * ARG3: size |
| * RET0: status |
| * RET1: error_flag |
| * RET2: data |
| * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size |
| * EBADALIGN pci_config_offset not size aligned |
| * ENOACCESS Access to this offset is not permitted |
| * |
| * Read PCI configuration space for the adapter described by the given |
| * devhandle. Read size (1, 2, or 4) bytes of data from the given |
| * pci_device, at pci_config_offset from the beginning of the device's |
| * configuration space. If there was no error, RET1 is set to zero and |
| * RET2 is set to the data read. Insignificant bits in RET2 are not |
| * guarenteed to have any specific value and therefore must be ignored. |
| * |
| * The data returned in RET2 is size based byte swapped. |
| * |
| * If an error occurs during the read, set RET1 to a non-zero value. The |
| * given pci_config_offset must be 'size' aligned. |
| */ |
| #define HV_FAST_PCI_CONFIG_GET 0xb4 |
| |
| /* pci_config_put() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_CONFIG_PUT |
| * ARG0: devhandle |
| * ARG1: pci_device |
| * ARG2: pci_config_offset |
| * ARG3: size |
| * ARG4: data |
| * RET0: status |
| * RET1: error_flag |
| * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size |
| * EBADALIGN pci_config_offset not size aligned |
| * ENOACCESS Access to this offset is not permitted |
| * |
| * Write PCI configuration space for the adapter described by the given |
| * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, |
| * at pci_config_offset from the beginning of the device's configuration |
| * space. The data argument contains the data to be written to configuration |
| * space. Prior to writing, the data is size based byte swapped. |
| * |
| * If an error occurs during the write access, do not generate an error |
| * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. |
| * The given pci_config_offset must be 'size' aligned. |
| * |
| * This function is permitted to read from offset zero in the configuration |
| * space described by the given pci_device if necessary to ensure that the |
| * write access to config space completes. |
| */ |
| #define HV_FAST_PCI_CONFIG_PUT 0xb5 |
| |
| /* pci_peek() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_PEEK |
| * ARG0: devhandle |
| * ARG1: real address |
| * ARG2: size |
| * RET0: status |
| * RET1: error_flag |
| * RET2: data |
| * ERRORS: EINVAL Invalid devhandle or size |
| * EBADALIGN Improperly aligned real address |
| * ENORADDR Bad real address |
| * ENOACCESS Guest access prohibited |
| * |
| * Attempt to read the IO address given by the given devhandle, real address, |
| * and size. Size must be 1, 2, 4, or 8. The read is performed as a single |
| * access operation using the given size. If an error occurs when reading |
| * from the given location, do not generate an error report, but return a |
| * non-zero value in RET1. If the read was successful, return zero in RET1 |
| * and return the actual data read in RET2. The data returned is size based |
| * byte swapped. |
| * |
| * Non-significant bits in RET2 are not guarenteed to have any specific value |
| * and therefore must be ignored. If RET1 is returned as non-zero, the data |
| * value is not guarenteed to have any specific value and should be ignored. |
| * |
| * The caller must have permission to read from the given devhandle, real |
| * address, which must be an IO address. The argument real address must be a |
| * size aligned address. |
| * |
| * The hypervisor implementation of this function must block access to any |
| * IO address that the guest does not have explicit permission to access. |
| */ |
| #define HV_FAST_PCI_PEEK 0xb6 |
| |
| /* pci_poke() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_POKE |
| * ARG0: devhandle |
| * ARG1: real address |
| * ARG2: size |
| * ARG3: data |
| * ARG4: pci_device |
| * RET0: status |
| * RET1: error_flag |
| * ERRORS: EINVAL Invalid devhandle, size, or pci_device |
| * EBADALIGN Improperly aligned real address |
| * ENORADDR Bad real address |
| * ENOACCESS Guest access prohibited |
| * ENOTSUPPORTED Function is not supported by implementation |
| * |
| * Attempt to write data to the IO address given by the given devhandle, |
| * real address, and size. Size must be 1, 2, 4, or 8. The write is |
| * performed as a single access operation using the given size. Prior to |
| * writing the data is size based swapped. |
| * |
| * If an error occurs when writing to the given location, do not generate an |
| * error report, but return a non-zero value in RET1. If the write was |
| * successful, return zero in RET1. |
| * |
| * pci_device describes the configuration address of the device being |
| * written to. The implementation may safely read from offset 0 with |
| * the configuration space of the device described by devhandle and |
| * pci_device in order to guarantee that the write portion of the operation |
| * completes |
| * |
| * Any error that occurs due to the read shall be reported using the normal |
| * error reporting mechanisms .. the read error is not suppressed. |
| * |
| * The caller must have permission to write to the given devhandle, real |
| * address, which must be an IO address. The argument real address must be a |
| * size aligned address. The caller must have permission to read from |
| * the given devhandle, pci_device cofiguration space offset 0. |
| * |
| * The hypervisor implementation of this function must block access to any |
| * IO address that the guest does not have explicit permission to access. |
| */ |
| #define HV_FAST_PCI_POKE 0xb7 |
| |
| /* pci_dma_sync() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_DMA_SYNC |
| * ARG0: devhandle |
| * ARG1: real address |
| * ARG2: size |
| * ARG3: io_sync_direction |
| * RET0: status |
| * RET1: #synced |
| * ERRORS: EINVAL Invalid devhandle or io_sync_direction |
| * ENORADDR Bad real address |
| * |
| * Synchronize a memory region described by the given real address and size, |
| * for the device defined by the given devhandle using the direction(s) |
| * defined by the given io_sync_direction. The argument size is the size of |
| * the memory region in bytes. |
| * |
| * Return the actual number of bytes synchronized in the return value #synced, |
| * which may be less than or equal to the argument size. If the return |
| * value #synced is less than size, the caller must continue to call this |
| * function with updated real address and size arguments until the entire |
| * memory region is synchronized. |
| */ |
| #define HV_FAST_PCI_DMA_SYNC 0xb8 |
| |
| /* PCI MSI services. */ |
| |
| #define HV_MSITYPE_MSI32 0x00 |
| #define HV_MSITYPE_MSI64 0x01 |
| |
| #define HV_MSIQSTATE_IDLE 0x00 |
| #define HV_MSIQSTATE_ERROR 0x01 |
| |
| #define HV_MSIQ_INVALID 0x00 |
| #define HV_MSIQ_VALID 0x01 |
| |
| #define HV_MSISTATE_IDLE 0x00 |
| #define HV_MSISTATE_DELIVERED 0x01 |
| |
| #define HV_MSIVALID_INVALID 0x00 |
| #define HV_MSIVALID_VALID 0x01 |
| |
| #define HV_PCIE_MSGTYPE_PME_MSG 0x18 |
| #define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b |
| #define HV_PCIE_MSGTYPE_CORR_MSG 0x30 |
| #define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 |
| #define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 |
| |
| #define HV_MSG_INVALID 0x00 |
| #define HV_MSG_VALID 0x01 |
| |
| /* pci_msiq_conf() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_CONF |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * ARG2: real address |
| * ARG3: number of entries |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle, msiqid or nentries |
| * EBADALIGN Improperly aligned real address |
| * ENORADDR Bad real address |
| * |
| * Configure the MSI queue given by the devhandle and msiqid arguments, |
| * and to be placed at the given real address and be of the given |
| * number of entries. The real address must be aligned exactly to match |
| * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry |
| * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ |
| * Head and Tail are initialized so that the MSI-EQ is 'empty'. |
| * |
| * Implementation Note: Certain implementations have fixed sized queues. In |
| * that case, number of entries must contain the correct |
| * value. |
| */ |
| #define HV_FAST_PCI_MSIQ_CONF 0xc0 |
| |
| /* pci_msiq_info() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_INFO |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * RET0: status |
| * RET1: real address |
| * RET2: number of entries |
| * ERRORS: EINVAL Invalid devhandle or msiqid |
| * |
| * Return the configuration information for the MSI queue described |
| * by the given devhandle and msiqid. The base address of the queue |
| * is returned in ARG1 and the number of entries is returned in ARG2. |
| * If the queue is unconfigured, the real address is undefined and the |
| * number of entries will be returned as zero. |
| */ |
| #define HV_FAST_PCI_MSIQ_INFO 0xc1 |
| |
| /* pci_msiq_getvalid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * RET0: status |
| * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) |
| * ERRORS: EINVAL Invalid devhandle or msiqid |
| * |
| * Get the valid state of the MSI-EQ described by the given devhandle and |
| * msiqid. |
| */ |
| #define HV_FAST_PCI_MSIQ_GETVALID 0xc2 |
| |
| /* pci_msiq_setvalid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid |
| * value or MSI EQ is uninitialized |
| * |
| * Set the valid state of the MSI-EQ described by the given devhandle and |
| * msiqid to the given msiqvalid. |
| */ |
| #define HV_FAST_PCI_MSIQ_SETVALID 0xc3 |
| |
| /* pci_msiq_getstate() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * RET0: status |
| * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) |
| * ERRORS: EINVAL Invalid devhandle or msiqid |
| * |
| * Get the state of the MSI-EQ described by the given devhandle and |
| * msiqid. |
| */ |
| #define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 |
| |
| /* pci_msiq_getvalid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate |
| * value or MSI EQ is uninitialized |
| * |
| * Set the state of the MSI-EQ described by the given devhandle and |
| * msiqid to the given msiqvalid. |
| */ |
| #define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 |
| |
| /* pci_msiq_gethead() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * RET0: status |
| * RET1: msiqhead |
| * ERRORS: EINVAL Invalid devhandle or msiqid |
| * |
| * Get the current MSI EQ queue head for the MSI-EQ described by the |
| * given devhandle and msiqid. |
| */ |
| #define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 |
| |
| /* pci_msiq_sethead() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * ARG2: msiqhead |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, |
| * or MSI EQ is uninitialized |
| * |
| * Set the current MSI EQ queue head for the MSI-EQ described by the |
| * given devhandle and msiqid. |
| */ |
| #define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 |
| |
| /* pci_msiq_gettail() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL |
| * ARG0: devhandle |
| * ARG1: msiqid |
| * RET0: status |
| * RET1: msiqtail |
| * ERRORS: EINVAL Invalid devhandle or msiqid |
| * |
| * Get the current MSI EQ queue tail for the MSI-EQ described by the |
| * given devhandle and msiqid. |
| */ |
| #define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 |
| |
| /* pci_msi_getvalid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSI_GETVALID |
| * ARG0: devhandle |
| * ARG1: msinum |
| * RET0: status |
| * RET1: msivalidstate |
| * ERRORS: EINVAL Invalid devhandle or msinum |
| * |
| * Get the current valid/enabled state for the MSI defined by the |
| * given devhandle and msinum. |
| */ |
| #define HV_FAST_PCI_MSI_GETVALID 0xc9 |
| |
| /* pci_msi_setvalid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSI_SETVALID |
| * ARG0: devhandle |
| * ARG1: msinum |
| * ARG2: msivalidstate |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate |
| * |
| * Set the current valid/enabled state for the MSI defined by the |
| * given devhandle and msinum. |
| */ |
| #define HV_FAST_PCI_MSI_SETVALID 0xca |
| |
| /* pci_msi_getmsiq() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ |
| * ARG0: devhandle |
| * ARG1: msinum |
| * RET0: status |
| * RET1: msiqid |
| * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound |
| * |
| * Get the MSI EQ that the MSI defined by the given devhandle and |
| * msinum is bound to. |
| */ |
| #define HV_FAST_PCI_MSI_GETMSIQ 0xcb |
| |
| /* pci_msi_setmsiq() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ |
| * ARG0: devhandle |
| * ARG1: msinum |
| * ARG2: msitype |
| * ARG3: msiqid |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle or msinum or msiqid |
| * |
| * Set the MSI EQ that the MSI defined by the given devhandle and |
| * msinum is bound to. |
| */ |
| #define HV_FAST_PCI_MSI_SETMSIQ 0xcc |
| |
| /* pci_msi_getstate() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSI_GETSTATE |
| * ARG0: devhandle |
| * ARG1: msinum |
| * RET0: status |
| * RET1: msistate |
| * ERRORS: EINVAL Invalid devhandle or msinum |
| * |
| * Get the state of the MSI defined by the given devhandle and msinum. |
| * If not initialized, return HV_MSISTATE_IDLE. |
| */ |
| #define HV_FAST_PCI_MSI_GETSTATE 0xcd |
| |
| /* pci_msi_setstate() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSI_SETSTATE |
| * ARG0: devhandle |
| * ARG1: msinum |
| * ARG2: msistate |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle or msinum or msistate |
| * |
| * Set the state of the MSI defined by the given devhandle and msinum. |
| */ |
| #define HV_FAST_PCI_MSI_SETSTATE 0xce |
| |
| /* pci_msg_getmsiq() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ |
| * ARG0: devhandle |
| * ARG1: msgtype |
| * RET0: status |
| * RET1: msiqid |
| * ERRORS: EINVAL Invalid devhandle or msgtype |
| * |
| * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. |
| */ |
| #define HV_FAST_PCI_MSG_GETMSIQ 0xd0 |
| |
| /* pci_msg_setmsiq() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ |
| * ARG0: devhandle |
| * ARG1: msgtype |
| * ARG2: msiqid |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid |
| * |
| * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. |
| */ |
| #define HV_FAST_PCI_MSG_SETMSIQ 0xd1 |
| |
| /* pci_msg_getvalid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSG_GETVALID |
| * ARG0: devhandle |
| * ARG1: msgtype |
| * RET0: status |
| * RET1: msgvalidstate |
| * ERRORS: EINVAL Invalid devhandle or msgtype |
| * |
| * Get the valid/enabled state of the MSG defined by the given |
| * devhandle and msgtype. |
| */ |
| #define HV_FAST_PCI_MSG_GETVALID 0xd2 |
| |
| /* pci_msg_setvalid() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_PCI_MSG_SETVALID |
| * ARG0: devhandle |
| * ARG1: msgtype |
| * ARG2: msgvalidstate |
| * RET0: status |
| * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate |
| * |
| * Set the valid/enabled state of the MSG defined by the given |
| * devhandle and msgtype. |
| */ |
| #define HV_FAST_PCI_MSG_SETVALID 0xd3 |
| |
| /* Performance counter services. */ |
| |
| #define HV_PERF_JBUS_PERF_CTRL_REG 0x00 |
| #define HV_PERF_JBUS_PERF_CNT_REG 0x01 |
| #define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 |
| #define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 |
| #define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 |
| #define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 |
| #define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 |
| #define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 |
| #define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 |
| #define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 |
| |
| /* get_perfreg() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_GET_PERFREG |
| * ARG0: performance reg number |
| * RET0: status |
| * RET1: performance reg value |
| * ERRORS: EINVAL Invalid performance register number |
| * ENOACCESS No access allowed to performance counters |
| * |
| * Read the value of the given DRAM/JBUS performance counter/control register. |
| */ |
| #define HV_FAST_GET_PERFREG 0x100 |
| |
| /* set_perfreg() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_SET_PERFREG |
| * ARG0: performance reg number |
| * ARG1: performance reg value |
| * RET0: status |
| * ERRORS: EINVAL Invalid performance register number |
| * ENOACCESS No access allowed to performance counters |
| * |
| * Write the given performance reg value to the given DRAM/JBUS |
| * performance counter/control register. |
| */ |
| #define HV_FAST_SET_PERFREG 0x101 |
| |
| /* MMU statistics services. |
| * |
| * The hypervisor maintains MMU statistics and privileged code provides |
| * a buffer where these statistics can be collected. It is continually |
| * updated once configured. The layout is as follows: |
| */ |
| #ifndef __ASSEMBLY__ |
| struct hv_mmu_statistics { |
| unsigned long immu_tsb_hits_ctx0_8k_tte; |
| unsigned long immu_tsb_ticks_ctx0_8k_tte; |
| unsigned long immu_tsb_hits_ctx0_64k_tte; |
| unsigned long immu_tsb_ticks_ctx0_64k_tte; |
| unsigned long __reserved1[2]; |
| unsigned long immu_tsb_hits_ctx0_4mb_tte; |
| unsigned long immu_tsb_ticks_ctx0_4mb_tte; |
| unsigned long __reserved2[2]; |
| unsigned long immu_tsb_hits_ctx0_256mb_tte; |
| unsigned long immu_tsb_ticks_ctx0_256mb_tte; |
| unsigned long __reserved3[4]; |
| unsigned long immu_tsb_hits_ctxnon0_8k_tte; |
| unsigned long immu_tsb_ticks_ctxnon0_8k_tte; |
| unsigned long immu_tsb_hits_ctxnon0_64k_tte; |
| unsigned long immu_tsb_ticks_ctxnon0_64k_tte; |
| unsigned long __reserved4[2]; |
| unsigned long immu_tsb_hits_ctxnon0_4mb_tte; |
| unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; |
| unsigned long __reserved5[2]; |
| unsigned long immu_tsb_hits_ctxnon0_256mb_tte; |
| unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; |
| unsigned long __reserved6[4]; |
| unsigned long dmmu_tsb_hits_ctx0_8k_tte; |
| unsigned long dmmu_tsb_ticks_ctx0_8k_tte; |
| unsigned long dmmu_tsb_hits_ctx0_64k_tte; |
| unsigned long dmmu_tsb_ticks_ctx0_64k_tte; |
| unsigned long __reserved7[2]; |
| unsigned long dmmu_tsb_hits_ctx0_4mb_tte; |
| unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; |
| unsigned long __reserved8[2]; |
| unsigned long dmmu_tsb_hits_ctx0_256mb_tte; |
| unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; |
| unsigned long __reserved9[4]; |
| unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; |
| unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; |
| unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; |
| unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; |
| unsigned long __reserved10[2]; |
| unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; |
| unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; |
| unsigned long __reserved11[2]; |
| unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; |
| unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; |
| unsigned long __reserved12[4]; |
| }; |
| #endif |
| |
| /* mmustat_conf() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMUSTAT_CONF |
| * ARG0: real address |
| * RET0: status |
| * RET1: real address |
| * ERRORS: ENORADDR Invalid real address |
| * EBADALIGN Real address not aligned on 64-byte boundary |
| * EBADTRAP API not supported on this processor |
| * |
| * Enable MMU statistic gathering using the buffer at the given real |
| * address on the current virtual CPU. The new buffer real address |
| * is given in ARG1, and the previously specified buffer real address |
| * is returned in RET1, or is returned as zero for the first invocation. |
| * |
| * If the passed in real address argument is zero, this will disable |
| * MMU statistic collection on the current virtual CPU. If an error is |
| * returned then no statistics are collected. |
| * |
| * The buffer contents should be initialized to all zeros before being |
| * given to the hypervisor or else the statistics will be meaningless. |
| */ |
| #define HV_FAST_MMUSTAT_CONF 0x102 |
| |
| /* mmustat_info() |
| * TRAP: HV_FAST_TRAP |
| * FUNCTION: HV_FAST_MMUSTAT_INFO |
| * RET0: status |
| * RET1: real address |
| * ERRORS: EBADTRAP API not supported on this processor |
| * |
| * Return the current state and real address of the currently configured |
| * MMU statistics buffer on the current virtual CPU. |
| */ |
| #define HV_FAST_MMUSTAT_INFO 0x103 |
| |
| /* Function numbers for HV_CORE_TRAP. */ |
| #define HV_CORE_VER 0x00 |
| #define HV_CORE_PUTCHAR 0x01 |
| #define HV_CORE_EXIT 0x02 |
| |
| #endif /* !(_SPARC64_HYPERVISOR_H) */ |