sata_dwc_460ex: fix misuse of ata_get_cmd_descript()
The driver erroneously uses ata_get_cmd_descript() not only for printing out
the ATA commands but also the protocol and DMA direction enums. Add functions
for properly printing those out...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index 34fc137..843af13 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -44,7 +44,7 @@
#undef DRV_NAME
#undef DRV_VERSION
#define DRV_NAME "sata-dwc"
-#define DRV_VERSION "1.2"
+#define DRV_VERSION "1.3"
/* SATA DMA driver Globals */
#define DMA_NUM_CHANS 1
@@ -336,11 +336,47 @@
void __iomem *addr, int dir);
static void dma_dwc_xfer_start(int dma_ch);
+static const char *get_prot_descript(u8 protocol)
+{
+ switch ((enum ata_tf_protocols)protocol) {
+ case ATA_PROT_NODATA:
+ return "ATA no data";
+ case ATA_PROT_PIO:
+ return "ATA PIO";
+ case ATA_PROT_DMA:
+ return "ATA DMA";
+ case ATA_PROT_NCQ:
+ return "ATA NCQ";
+ case ATAPI_PROT_NODATA:
+ return "ATAPI no data";
+ case ATAPI_PROT_PIO:
+ return "ATAPI PIO";
+ case ATAPI_PROT_DMA:
+ return "ATAPI DMA";
+ default:
+ return "unknown";
+ }
+}
+
+static const char *get_dma_dir_descript(int dma_dir)
+{
+ switch ((enum dma_data_direction)dma_dir) {
+ case DMA_BIDIRECTIONAL:
+ return "bidirectional";
+ case DMA_TO_DEVICE:
+ return "to device";
+ case DMA_FROM_DEVICE:
+ return "from device";
+ default:
+ return "none";
+ }
+}
+
static void sata_dwc_tf_dump(struct ata_taskfile *tf)
{
dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags:"
- "0x%lx device: %x\n", tf->command, ata_get_cmd_descript\
- (tf->protocol), tf->flags, tf->device);
+ "0x%lx device: %x\n", tf->command,
+ get_prot_descript(tf->protocol), tf->flags, tf->device);
dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x "
"lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
tf->lbam, tf->lbah);
@@ -970,7 +1006,7 @@
}
dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n",
- __func__, ata_get_cmd_descript(qc->tf.protocol));
+ __func__, get_prot_descript(qc->tf.protocol));
DRVSTILLBUSY:
if (ata_is_dma(qc->tf.protocol)) {
/*
@@ -1060,7 +1096,7 @@
/* Process completed command */
dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
- ata_get_cmd_descript(qc->tf.protocol));
+ get_prot_descript(qc->tf.protocol));
if (ata_is_dma(qc->tf.protocol)) {
host_pvt.dma_interrupt_count++;
if (hsdevp->dma_pending[tag] == \
@@ -1145,8 +1181,8 @@
if (tag > 0) {
dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
"dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
- ata_get_cmd_descript(qc->dma_dir),
- ata_get_cmd_descript(qc->tf.protocol),
+ get_dma_dir_descript(qc->dma_dir),
+ get_prot_descript(qc->tf.protocol),
in_le32(&(hsdev->sata_dwc_regs->dmacr)));
}
#endif
@@ -1416,7 +1452,7 @@
dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s "
"start_dma? %x\n", __func__, qc, tag, qc->tf.command,
- ata_get_cmd_descript(qc->dma_dir), start_dma);
+ get_dma_dir_descript(qc->dma_dir), start_dma);
sata_dwc_tf_dump(&(qc->tf));
if (start_dma) {
@@ -1467,7 +1503,7 @@
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
- __func__, ap->port_no, ata_get_cmd_descript(qc->dma_dir),
+ __func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
qc->n_elem);
dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
@@ -1494,7 +1530,7 @@
"prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
__func__, ap->print_id, qc->tf.command,
ata_get_cmd_descript(qc->tf.command),
- qc->tag, ata_get_cmd_descript(qc->tf.protocol),
+ qc->tag, get_prot_descript(qc->tf.protocol),
ap->link.active_tag, ap->link.sactive);
#endif