| /* |
| * printer.c -- Printer gadget driver |
| * |
| * Copyright (C) 2003-2005 David Brownell |
| * Copyright (C) 2006 Craig W. Nadler |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/mutex.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/timer.h> |
| #include <linux/list.h> |
| #include <linux/interrupt.h> |
| #include <linux/utsname.h> |
| #include <linux/device.h> |
| #include <linux/moduleparam.h> |
| #include <linux/fs.h> |
| #include <linux/poll.h> |
| #include <linux/types.h> |
| #include <linux/ctype.h> |
| #include <linux/cdev.h> |
| |
| #include <asm/byteorder.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <asm/system.h> |
| #include <linux/uaccess.h> |
| #include <asm/unaligned.h> |
| |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/g_printer.h> |
| |
| #include "gadget_chips.h" |
| |
| |
| /* |
| * Kbuild is not very cooperative with respect to linking separately |
| * compiled library objects into one module. So for now we won't use |
| * separate compilation ... ensuring init/exit sections work to shrink |
| * the runtime footprint, and giving us at least some parts of what |
| * a "gcc --combine ... part1.c part2.c part3.c ... " build would. |
| */ |
| #include "usbstring.c" |
| #include "config.c" |
| #include "epautoconf.c" |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #define DRIVER_DESC "Printer Gadget" |
| #define DRIVER_VERSION "2007 OCT 06" |
| |
| static DEFINE_MUTEX(printer_mutex); |
| static const char shortname [] = "printer"; |
| static const char driver_desc [] = DRIVER_DESC; |
| |
| static dev_t g_printer_devno; |
| |
| static struct class *usb_gadget_class; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| struct printer_dev { |
| spinlock_t lock; /* lock this structure */ |
| /* lock buffer lists during read/write calls */ |
| struct mutex lock_printer_io; |
| struct usb_gadget *gadget; |
| struct usb_request *req; /* for control responses */ |
| u8 config; |
| s8 interface; |
| struct usb_ep *in_ep, *out_ep; |
| const struct usb_endpoint_descriptor |
| *in, *out; |
| struct list_head rx_reqs; /* List of free RX structs */ |
| struct list_head rx_reqs_active; /* List of Active RX xfers */ |
| struct list_head rx_buffers; /* List of completed xfers */ |
| /* wait until there is data to be read. */ |
| wait_queue_head_t rx_wait; |
| struct list_head tx_reqs; /* List of free TX structs */ |
| struct list_head tx_reqs_active; /* List of Active TX xfers */ |
| /* Wait until there are write buffers available to use. */ |
| wait_queue_head_t tx_wait; |
| /* Wait until all write buffers have been sent. */ |
| wait_queue_head_t tx_flush_wait; |
| struct usb_request *current_rx_req; |
| size_t current_rx_bytes; |
| u8 *current_rx_buf; |
| u8 printer_status; |
| u8 reset_printer; |
| struct cdev printer_cdev; |
| struct device *pdev; |
| u8 printer_cdev_open; |
| wait_queue_head_t wait; |
| }; |
| |
| static struct printer_dev usb_printer_gadget; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! |
| * Instead: allocate your own, using normal USB-IF procedures. |
| */ |
| |
| /* Thanks to NetChip Technologies for donating this product ID. |
| */ |
| #define PRINTER_VENDOR_NUM 0x0525 /* NetChip */ |
| #define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */ |
| |
| /* Some systems will want different product identifiers published in the |
| * device descriptor, either numbers or strings or both. These string |
| * parameters are in UTF-8 (superset of ASCII's 7 bit characters). |
| */ |
| |
| static ushort idVendor; |
| module_param(idVendor, ushort, S_IRUGO); |
| MODULE_PARM_DESC(idVendor, "USB Vendor ID"); |
| |
| static ushort idProduct; |
| module_param(idProduct, ushort, S_IRUGO); |
| MODULE_PARM_DESC(idProduct, "USB Product ID"); |
| |
| static ushort bcdDevice; |
| module_param(bcdDevice, ushort, S_IRUGO); |
| MODULE_PARM_DESC(bcdDevice, "USB Device version (BCD)"); |
| |
| static char *iManufacturer; |
| module_param(iManufacturer, charp, S_IRUGO); |
| MODULE_PARM_DESC(iManufacturer, "USB Manufacturer string"); |
| |
| static char *iProduct; |
| module_param(iProduct, charp, S_IRUGO); |
| MODULE_PARM_DESC(iProduct, "USB Product string"); |
| |
| static char *iSerialNum; |
| module_param(iSerialNum, charp, S_IRUGO); |
| MODULE_PARM_DESC(iSerialNum, "1"); |
| |
| static char *iPNPstring; |
| module_param(iPNPstring, charp, S_IRUGO); |
| MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"); |
| |
| /* Number of requests to allocate per endpoint, not used for ep0. */ |
| static unsigned qlen = 10; |
| module_param(qlen, uint, S_IRUGO|S_IWUSR); |
| |
| #define QLEN qlen |
| |
| #ifdef CONFIG_USB_GADGET_DUALSPEED |
| #define DEVSPEED USB_SPEED_HIGH |
| #else /* full speed (low speed doesn't do bulk) */ |
| #define DEVSPEED USB_SPEED_FULL |
| #endif |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| #define xprintk(d, level, fmt, args...) \ |
| printk(level "%s: " fmt, DRIVER_DESC, ## args) |
| |
| #ifdef DEBUG |
| #define DBG(dev, fmt, args...) \ |
| xprintk(dev, KERN_DEBUG, fmt, ## args) |
| #else |
| #define DBG(dev, fmt, args...) \ |
| do { } while (0) |
| #endif /* DEBUG */ |
| |
| #ifdef VERBOSE |
| #define VDBG(dev, fmt, args...) \ |
| xprintk(dev, KERN_DEBUG, fmt, ## args) |
| #else |
| #define VDBG(dev, fmt, args...) \ |
| do { } while (0) |
| #endif /* VERBOSE */ |
| |
| #define ERROR(dev, fmt, args...) \ |
| xprintk(dev, KERN_ERR, fmt, ## args) |
| #define WARNING(dev, fmt, args...) \ |
| xprintk(dev, KERN_WARNING, fmt, ## args) |
| #define INFO(dev, fmt, args...) \ |
| xprintk(dev, KERN_INFO, fmt, ## args) |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* USB DRIVER HOOKUP (to the hardware driver, below us), mostly |
| * ep0 implementation: descriptors, config management, setup(). |
| * also optional class-specific notification interrupt transfer. |
| */ |
| |
| /* |
| * DESCRIPTORS ... most are static, but strings and (full) configuration |
| * descriptors are built on demand. |
| */ |
| |
| #define STRING_MANUFACTURER 1 |
| #define STRING_PRODUCT 2 |
| #define STRING_SERIALNUM 3 |
| |
| /* holds our biggest descriptor */ |
| #define USB_DESC_BUFSIZE 256 |
| #define USB_BUFSIZE 8192 |
| |
| /* This device advertises one configuration. */ |
| #define DEV_CONFIG_VALUE 1 |
| #define PRINTER_INTERFACE 0 |
| |
| static struct usb_device_descriptor device_desc = { |
| .bLength = sizeof device_desc, |
| .bDescriptorType = USB_DT_DEVICE, |
| .bcdUSB = cpu_to_le16(0x0200), |
| .bDeviceClass = USB_CLASS_PER_INTERFACE, |
| .bDeviceSubClass = 0, |
| .bDeviceProtocol = 0, |
| .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM), |
| .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM), |
| .iManufacturer = STRING_MANUFACTURER, |
| .iProduct = STRING_PRODUCT, |
| .iSerialNumber = STRING_SERIALNUM, |
| .bNumConfigurations = 1 |
| }; |
| |
| static struct usb_otg_descriptor otg_desc = { |
| .bLength = sizeof otg_desc, |
| .bDescriptorType = USB_DT_OTG, |
| .bmAttributes = USB_OTG_SRP |
| }; |
| |
| static struct usb_config_descriptor config_desc = { |
| .bLength = sizeof config_desc, |
| .bDescriptorType = USB_DT_CONFIG, |
| |
| /* compute wTotalLength on the fly */ |
| .bNumInterfaces = 1, |
| .bConfigurationValue = DEV_CONFIG_VALUE, |
| .iConfiguration = 0, |
| .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, |
| .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, |
| }; |
| |
| static struct usb_interface_descriptor intf_desc = { |
| .bLength = sizeof intf_desc, |
| .bDescriptorType = USB_DT_INTERFACE, |
| .bInterfaceNumber = PRINTER_INTERFACE, |
| .bNumEndpoints = 2, |
| .bInterfaceClass = USB_CLASS_PRINTER, |
| .bInterfaceSubClass = 1, /* Printer Sub-Class */ |
| .bInterfaceProtocol = 2, /* Bi-Directional */ |
| .iInterface = 0 |
| }; |
| |
| static struct usb_endpoint_descriptor fs_ep_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_IN, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK |
| }; |
| |
| static struct usb_endpoint_descriptor fs_ep_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK |
| }; |
| |
| static const struct usb_descriptor_header *fs_printer_function [11] = { |
| (struct usb_descriptor_header *) &otg_desc, |
| (struct usb_descriptor_header *) &intf_desc, |
| (struct usb_descriptor_header *) &fs_ep_in_desc, |
| (struct usb_descriptor_header *) &fs_ep_out_desc, |
| NULL |
| }; |
| |
| #ifdef CONFIG_USB_GADGET_DUALSPEED |
| |
| /* |
| * usb 2.0 devices need to expose both high speed and full speed |
| * descriptors, unless they only run at full speed. |
| */ |
| |
| static struct usb_endpoint_descriptor hs_ep_in_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512) |
| }; |
| |
| static struct usb_endpoint_descriptor hs_ep_out_desc = { |
| .bLength = USB_DT_ENDPOINT_SIZE, |
| .bDescriptorType = USB_DT_ENDPOINT, |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, |
| .wMaxPacketSize = cpu_to_le16(512) |
| }; |
| |
| static struct usb_qualifier_descriptor dev_qualifier = { |
| .bLength = sizeof dev_qualifier, |
| .bDescriptorType = USB_DT_DEVICE_QUALIFIER, |
| .bcdUSB = cpu_to_le16(0x0200), |
| .bDeviceClass = USB_CLASS_PRINTER, |
| .bNumConfigurations = 1 |
| }; |
| |
| static const struct usb_descriptor_header *hs_printer_function [11] = { |
| (struct usb_descriptor_header *) &otg_desc, |
| (struct usb_descriptor_header *) &intf_desc, |
| (struct usb_descriptor_header *) &hs_ep_in_desc, |
| (struct usb_descriptor_header *) &hs_ep_out_desc, |
| NULL |
| }; |
| |
| /* maxpacket and other transfer characteristics vary by speed. */ |
| #define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs)) |
| |
| #else |
| |
| /* if there's no high speed support, maxpacket doesn't change. */ |
| #define ep_desc(g, hs, fs) (((void)(g)), (fs)) |
| |
| #endif /* !CONFIG_USB_GADGET_DUALSPEED */ |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* descriptors that are built on-demand */ |
| |
| static char manufacturer [50]; |
| static char product_desc [40] = DRIVER_DESC; |
| static char serial_num [40] = "1"; |
| static char pnp_string [1024] = |
| "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;"; |
| |
| /* static strings, in UTF-8 */ |
| static struct usb_string strings [] = { |
| { STRING_MANUFACTURER, manufacturer, }, |
| { STRING_PRODUCT, product_desc, }, |
| { STRING_SERIALNUM, serial_num, }, |
| { } /* end of list */ |
| }; |
| |
| static struct usb_gadget_strings stringtab = { |
| .language = 0x0409, /* en-us */ |
| .strings = strings, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct usb_request * |
| printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags) |
| { |
| struct usb_request *req; |
| |
| req = usb_ep_alloc_request(ep, gfp_flags); |
| |
| if (req != NULL) { |
| req->length = len; |
| req->buf = kmalloc(len, gfp_flags); |
| if (req->buf == NULL) { |
| usb_ep_free_request(ep, req); |
| return NULL; |
| } |
| } |
| |
| return req; |
| } |
| |
| static void |
| printer_req_free(struct usb_ep *ep, struct usb_request *req) |
| { |
| if (ep != NULL && req != NULL) { |
| kfree(req->buf); |
| usb_ep_free_request(ep, req); |
| } |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static void rx_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct printer_dev *dev = ep->driver_data; |
| int status = req->status; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| list_del_init(&req->list); /* Remode from Active List */ |
| |
| switch (status) { |
| |
| /* normal completion */ |
| case 0: |
| if (req->actual > 0) { |
| list_add_tail(&req->list, &dev->rx_buffers); |
| DBG(dev, "G_Printer : rx length %d\n", req->actual); |
| } else { |
| list_add(&req->list, &dev->rx_reqs); |
| } |
| break; |
| |
| /* software-driven interface shutdown */ |
| case -ECONNRESET: /* unlink */ |
| case -ESHUTDOWN: /* disconnect etc */ |
| VDBG(dev, "rx shutdown, code %d\n", status); |
| list_add(&req->list, &dev->rx_reqs); |
| break; |
| |
| /* for hardware automagic (such as pxa) */ |
| case -ECONNABORTED: /* endpoint reset */ |
| DBG(dev, "rx %s reset\n", ep->name); |
| list_add(&req->list, &dev->rx_reqs); |
| break; |
| |
| /* data overrun */ |
| case -EOVERFLOW: |
| /* FALLTHROUGH */ |
| |
| default: |
| DBG(dev, "rx status %d\n", status); |
| list_add(&req->list, &dev->rx_reqs); |
| break; |
| } |
| |
| wake_up_interruptible(&dev->rx_wait); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } |
| |
| static void tx_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| struct printer_dev *dev = ep->driver_data; |
| |
| switch (req->status) { |
| default: |
| VDBG(dev, "tx err %d\n", req->status); |
| /* FALLTHROUGH */ |
| case -ECONNRESET: /* unlink */ |
| case -ESHUTDOWN: /* disconnect etc */ |
| break; |
| case 0: |
| break; |
| } |
| |
| spin_lock(&dev->lock); |
| /* Take the request struct off the active list and put it on the |
| * free list. |
| */ |
| list_del_init(&req->list); |
| list_add(&req->list, &dev->tx_reqs); |
| wake_up_interruptible(&dev->tx_wait); |
| if (likely(list_empty(&dev->tx_reqs_active))) |
| wake_up_interruptible(&dev->tx_flush_wait); |
| |
| spin_unlock(&dev->lock); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int |
| printer_open(struct inode *inode, struct file *fd) |
| { |
| struct printer_dev *dev; |
| unsigned long flags; |
| int ret = -EBUSY; |
| |
| mutex_lock(&printer_mutex); |
| dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| if (!dev->printer_cdev_open) { |
| dev->printer_cdev_open = 1; |
| fd->private_data = dev; |
| ret = 0; |
| /* Change the printer status to show that it's on-line. */ |
| dev->printer_status |= PRINTER_SELECTED; |
| } |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| DBG(dev, "printer_open returned %x\n", ret); |
| mutex_unlock(&printer_mutex); |
| return ret; |
| } |
| |
| static int |
| printer_close(struct inode *inode, struct file *fd) |
| { |
| struct printer_dev *dev = fd->private_data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| dev->printer_cdev_open = 0; |
| fd->private_data = NULL; |
| /* Change printer status to show that the printer is off-line. */ |
| dev->printer_status &= ~PRINTER_SELECTED; |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| DBG(dev, "printer_close\n"); |
| |
| return 0; |
| } |
| |
| /* This function must be called with interrupts turned off. */ |
| static void |
| setup_rx_reqs(struct printer_dev *dev) |
| { |
| struct usb_request *req; |
| |
| while (likely(!list_empty(&dev->rx_reqs))) { |
| int error; |
| |
| req = container_of(dev->rx_reqs.next, |
| struct usb_request, list); |
| list_del_init(&req->list); |
| |
| /* The USB Host sends us whatever amount of data it wants to |
| * so we always set the length field to the full USB_BUFSIZE. |
| * If the amount of data is more than the read() caller asked |
| * for it will be stored in the request buffer until it is |
| * asked for by read(). |
| */ |
| req->length = USB_BUFSIZE; |
| req->complete = rx_complete; |
| |
| error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); |
| if (error) { |
| DBG(dev, "rx submit --> %d\n", error); |
| list_add(&req->list, &dev->rx_reqs); |
| break; |
| } else { |
| list_add(&req->list, &dev->rx_reqs_active); |
| } |
| } |
| } |
| |
| static ssize_t |
| printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr) |
| { |
| struct printer_dev *dev = fd->private_data; |
| unsigned long flags; |
| size_t size; |
| size_t bytes_copied; |
| struct usb_request *req; |
| /* This is a pointer to the current USB rx request. */ |
| struct usb_request *current_rx_req; |
| /* This is the number of bytes in the current rx buffer. */ |
| size_t current_rx_bytes; |
| /* This is a pointer to the current rx buffer. */ |
| u8 *current_rx_buf; |
| |
| if (len == 0) |
| return -EINVAL; |
| |
| DBG(dev, "printer_read trying to read %d bytes\n", (int)len); |
| |
| mutex_lock(&dev->lock_printer_io); |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| /* We will use this flag later to check if a printer reset happened |
| * after we turn interrupts back on. |
| */ |
| dev->reset_printer = 0; |
| |
| setup_rx_reqs(dev); |
| |
| bytes_copied = 0; |
| current_rx_req = dev->current_rx_req; |
| current_rx_bytes = dev->current_rx_bytes; |
| current_rx_buf = dev->current_rx_buf; |
| dev->current_rx_req = NULL; |
| dev->current_rx_bytes = 0; |
| dev->current_rx_buf = NULL; |
| |
| /* Check if there is any data in the read buffers. Please note that |
| * current_rx_bytes is the number of bytes in the current rx buffer. |
| * If it is zero then check if there are any other rx_buffers that |
| * are on the completed list. We are only out of data if all rx |
| * buffers are empty. |
| */ |
| if ((current_rx_bytes == 0) && |
| (likely(list_empty(&dev->rx_buffers)))) { |
| /* Turn interrupts back on before sleeping. */ |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| /* |
| * If no data is available check if this is a NON-Blocking |
| * call or not. |
| */ |
| if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { |
| mutex_unlock(&dev->lock_printer_io); |
| return -EAGAIN; |
| } |
| |
| /* Sleep until data is available */ |
| wait_event_interruptible(dev->rx_wait, |
| (likely(!list_empty(&dev->rx_buffers)))); |
| spin_lock_irqsave(&dev->lock, flags); |
| } |
| |
| /* We have data to return then copy it to the caller's buffer.*/ |
| while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers))) |
| && len) { |
| if (current_rx_bytes == 0) { |
| req = container_of(dev->rx_buffers.next, |
| struct usb_request, list); |
| list_del_init(&req->list); |
| |
| if (req->actual && req->buf) { |
| current_rx_req = req; |
| current_rx_bytes = req->actual; |
| current_rx_buf = req->buf; |
| } else { |
| list_add(&req->list, &dev->rx_reqs); |
| continue; |
| } |
| } |
| |
| /* Don't leave irqs off while doing memory copies */ |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| if (len > current_rx_bytes) |
| size = current_rx_bytes; |
| else |
| size = len; |
| |
| size -= copy_to_user(buf, current_rx_buf, size); |
| bytes_copied += size; |
| len -= size; |
| buf += size; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| /* We've disconnected or reset so return. */ |
| if (dev->reset_printer) { |
| list_add(¤t_rx_req->list, &dev->rx_reqs); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| mutex_unlock(&dev->lock_printer_io); |
| return -EAGAIN; |
| } |
| |
| /* If we not returning all the data left in this RX request |
| * buffer then adjust the amount of data left in the buffer. |
| * Othewise if we are done with this RX request buffer then |
| * requeue it to get any incoming data from the USB host. |
| */ |
| if (size < current_rx_bytes) { |
| current_rx_bytes -= size; |
| current_rx_buf += size; |
| } else { |
| list_add(¤t_rx_req->list, &dev->rx_reqs); |
| current_rx_bytes = 0; |
| current_rx_buf = NULL; |
| current_rx_req = NULL; |
| } |
| } |
| |
| dev->current_rx_req = current_rx_req; |
| dev->current_rx_bytes = current_rx_bytes; |
| dev->current_rx_buf = current_rx_buf; |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| mutex_unlock(&dev->lock_printer_io); |
| |
| DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied); |
| |
| if (bytes_copied) |
| return bytes_copied; |
| else |
| return -EAGAIN; |
| } |
| |
| static ssize_t |
| printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr) |
| { |
| struct printer_dev *dev = fd->private_data; |
| unsigned long flags; |
| size_t size; /* Amount of data in a TX request. */ |
| size_t bytes_copied = 0; |
| struct usb_request *req; |
| |
| DBG(dev, "printer_write trying to send %d bytes\n", (int)len); |
| |
| if (len == 0) |
| return -EINVAL; |
| |
| mutex_lock(&dev->lock_printer_io); |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| /* Check if a printer reset happens while we have interrupts on */ |
| dev->reset_printer = 0; |
| |
| /* Check if there is any available write buffers */ |
| if (likely(list_empty(&dev->tx_reqs))) { |
| /* Turn interrupts back on before sleeping. */ |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| /* |
| * If write buffers are available check if this is |
| * a NON-Blocking call or not. |
| */ |
| if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) { |
| mutex_unlock(&dev->lock_printer_io); |
| return -EAGAIN; |
| } |
| |
| /* Sleep until a write buffer is available */ |
| wait_event_interruptible(dev->tx_wait, |
| (likely(!list_empty(&dev->tx_reqs)))); |
| spin_lock_irqsave(&dev->lock, flags); |
| } |
| |
| while (likely(!list_empty(&dev->tx_reqs)) && len) { |
| |
| if (len > USB_BUFSIZE) |
| size = USB_BUFSIZE; |
| else |
| size = len; |
| |
| req = container_of(dev->tx_reqs.next, struct usb_request, |
| list); |
| list_del_init(&req->list); |
| |
| req->complete = tx_complete; |
| req->length = size; |
| |
| /* Check if we need to send a zero length packet. */ |
| if (len > size) |
| /* They will be more TX requests so no yet. */ |
| req->zero = 0; |
| else |
| /* If the data amount is not a multple of the |
| * maxpacket size then send a zero length packet. |
| */ |
| req->zero = ((len % dev->in_ep->maxpacket) == 0); |
| |
| /* Don't leave irqs off while doing memory copies */ |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| if (copy_from_user(req->buf, buf, size)) { |
| list_add(&req->list, &dev->tx_reqs); |
| mutex_unlock(&dev->lock_printer_io); |
| return bytes_copied; |
| } |
| |
| bytes_copied += size; |
| len -= size; |
| buf += size; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| /* We've disconnected or reset so free the req and buffer */ |
| if (dev->reset_printer) { |
| list_add(&req->list, &dev->tx_reqs); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| mutex_unlock(&dev->lock_printer_io); |
| return -EAGAIN; |
| } |
| |
| if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) { |
| list_add(&req->list, &dev->tx_reqs); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| mutex_unlock(&dev->lock_printer_io); |
| return -EAGAIN; |
| } |
| |
| list_add(&req->list, &dev->tx_reqs_active); |
| |
| } |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| mutex_unlock(&dev->lock_printer_io); |
| |
| DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied); |
| |
| if (bytes_copied) { |
| return bytes_copied; |
| } else { |
| return -EAGAIN; |
| } |
| } |
| |
| static int |
| printer_fsync(struct file *fd, int datasync) |
| { |
| struct printer_dev *dev = fd->private_data; |
| unsigned long flags; |
| int tx_list_empty; |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| tx_list_empty = (likely(list_empty(&dev->tx_reqs))); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| if (!tx_list_empty) { |
| /* Sleep until all data has been sent */ |
| wait_event_interruptible(dev->tx_flush_wait, |
| (likely(list_empty(&dev->tx_reqs_active)))); |
| } |
| |
| return 0; |
| } |
| |
| static unsigned int |
| printer_poll(struct file *fd, poll_table *wait) |
| { |
| struct printer_dev *dev = fd->private_data; |
| unsigned long flags; |
| int status = 0; |
| |
| mutex_lock(&dev->lock_printer_io); |
| spin_lock_irqsave(&dev->lock, flags); |
| setup_rx_reqs(dev); |
| spin_unlock_irqrestore(&dev->lock, flags); |
| mutex_unlock(&dev->lock_printer_io); |
| |
| poll_wait(fd, &dev->rx_wait, wait); |
| poll_wait(fd, &dev->tx_wait, wait); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| if (likely(!list_empty(&dev->tx_reqs))) |
| status |= POLLOUT | POLLWRNORM; |
| |
| if (likely(dev->current_rx_bytes) || |
| likely(!list_empty(&dev->rx_buffers))) |
| status |= POLLIN | POLLRDNORM; |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return status; |
| } |
| |
| static long |
| printer_ioctl(struct file *fd, unsigned int code, unsigned long arg) |
| { |
| struct printer_dev *dev = fd->private_data; |
| unsigned long flags; |
| int status = 0; |
| |
| DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg); |
| |
| /* handle ioctls */ |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| switch (code) { |
| case GADGET_GET_PRINTER_STATUS: |
| status = (int)dev->printer_status; |
| break; |
| case GADGET_SET_PRINTER_STATUS: |
| dev->printer_status = (u8)arg; |
| break; |
| default: |
| /* could not handle ioctl */ |
| DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n", |
| code); |
| status = -ENOTTY; |
| } |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| |
| return status; |
| } |
| |
| /* used after endpoint configuration */ |
| static const struct file_operations printer_io_operations = { |
| .owner = THIS_MODULE, |
| .open = printer_open, |
| .read = printer_read, |
| .write = printer_write, |
| .fsync = printer_fsync, |
| .poll = printer_poll, |
| .unlocked_ioctl = printer_ioctl, |
| .release = printer_close, |
| .llseek = noop_llseek, |
| }; |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int |
| set_printer_interface(struct printer_dev *dev) |
| { |
| int result = 0; |
| |
| dev->in = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc); |
| dev->in_ep->driver_data = dev; |
| |
| dev->out = ep_desc(dev->gadget, &hs_ep_out_desc, &fs_ep_out_desc); |
| dev->out_ep->driver_data = dev; |
| |
| result = usb_ep_enable(dev->in_ep, dev->in); |
| if (result != 0) { |
| DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); |
| goto done; |
| } |
| |
| result = usb_ep_enable(dev->out_ep, dev->out); |
| if (result != 0) { |
| DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result); |
| goto done; |
| } |
| |
| done: |
| /* on error, disable any endpoints */ |
| if (result != 0) { |
| (void) usb_ep_disable(dev->in_ep); |
| (void) usb_ep_disable(dev->out_ep); |
| dev->in = NULL; |
| dev->out = NULL; |
| } |
| |
| /* caller is responsible for cleanup on error */ |
| return result; |
| } |
| |
| static void printer_reset_interface(struct printer_dev *dev) |
| { |
| if (dev->interface < 0) |
| return; |
| |
| DBG(dev, "%s\n", __func__); |
| |
| if (dev->in) |
| usb_ep_disable(dev->in_ep); |
| |
| if (dev->out) |
| usb_ep_disable(dev->out_ep); |
| |
| dev->interface = -1; |
| } |
| |
| /* change our operational config. must agree with the code |
| * that returns config descriptors, and altsetting code. |
| */ |
| static int |
| printer_set_config(struct printer_dev *dev, unsigned number) |
| { |
| int result = 0; |
| struct usb_gadget *gadget = dev->gadget; |
| |
| switch (number) { |
| case DEV_CONFIG_VALUE: |
| result = 0; |
| break; |
| default: |
| result = -EINVAL; |
| /* FALL THROUGH */ |
| case 0: |
| break; |
| } |
| |
| if (result) { |
| usb_gadget_vbus_draw(dev->gadget, |
| dev->gadget->is_otg ? 8 : 100); |
| } else { |
| char *speed; |
| unsigned power; |
| |
| power = 2 * config_desc.bMaxPower; |
| usb_gadget_vbus_draw(dev->gadget, power); |
| |
| switch (gadget->speed) { |
| case USB_SPEED_FULL: speed = "full"; break; |
| #ifdef CONFIG_USB_GADGET_DUALSPEED |
| case USB_SPEED_HIGH: speed = "high"; break; |
| #endif |
| default: speed = "?"; break; |
| } |
| |
| dev->config = number; |
| INFO(dev, "%s speed config #%d: %d mA, %s\n", |
| speed, number, power, driver_desc); |
| } |
| return result; |
| } |
| |
| static int |
| config_buf(enum usb_device_speed speed, u8 *buf, u8 type, unsigned index, |
| int is_otg) |
| { |
| int len; |
| const struct usb_descriptor_header **function; |
| #ifdef CONFIG_USB_GADGET_DUALSPEED |
| int hs = (speed == USB_SPEED_HIGH); |
| |
| if (type == USB_DT_OTHER_SPEED_CONFIG) |
| hs = !hs; |
| |
| if (hs) { |
| function = hs_printer_function; |
| } else { |
| function = fs_printer_function; |
| } |
| #else |
| function = fs_printer_function; |
| #endif |
| |
| if (index >= device_desc.bNumConfigurations) |
| return -EINVAL; |
| |
| /* for now, don't advertise srp-only devices */ |
| if (!is_otg) |
| function++; |
| |
| len = usb_gadget_config_buf(&config_desc, buf, USB_DESC_BUFSIZE, |
| function); |
| if (len < 0) |
| return len; |
| ((struct usb_config_descriptor *) buf)->bDescriptorType = type; |
| return len; |
| } |
| |
| /* Change our operational Interface. */ |
| static int |
| set_interface(struct printer_dev *dev, unsigned number) |
| { |
| int result = 0; |
| |
| /* Free the current interface */ |
| switch (dev->interface) { |
| case PRINTER_INTERFACE: |
| printer_reset_interface(dev); |
| break; |
| } |
| |
| switch (number) { |
| case PRINTER_INTERFACE: |
| result = set_printer_interface(dev); |
| if (result) { |
| printer_reset_interface(dev); |
| } else { |
| dev->interface = PRINTER_INTERFACE; |
| } |
| break; |
| default: |
| result = -EINVAL; |
| /* FALL THROUGH */ |
| } |
| |
| if (!result) |
| INFO(dev, "Using interface %x\n", number); |
| |
| return result; |
| } |
| |
| static void printer_setup_complete(struct usb_ep *ep, struct usb_request *req) |
| { |
| if (req->status || req->actual != req->length) |
| DBG((struct printer_dev *) ep->driver_data, |
| "setup complete --> %d, %d/%d\n", |
| req->status, req->actual, req->length); |
| } |
| |
| static void printer_soft_reset(struct printer_dev *dev) |
| { |
| struct usb_request *req; |
| |
| INFO(dev, "Received Printer Reset Request\n"); |
| |
| if (usb_ep_disable(dev->in_ep)) |
| DBG(dev, "Failed to disable USB in_ep\n"); |
| if (usb_ep_disable(dev->out_ep)) |
| DBG(dev, "Failed to disable USB out_ep\n"); |
| |
| if (dev->current_rx_req != NULL) { |
| list_add(&dev->current_rx_req->list, &dev->rx_reqs); |
| dev->current_rx_req = NULL; |
| } |
| dev->current_rx_bytes = 0; |
| dev->current_rx_buf = NULL; |
| dev->reset_printer = 1; |
| |
| while (likely(!(list_empty(&dev->rx_buffers)))) { |
| req = container_of(dev->rx_buffers.next, struct usb_request, |
| list); |
| list_del_init(&req->list); |
| list_add(&req->list, &dev->rx_reqs); |
| } |
| |
| while (likely(!(list_empty(&dev->rx_reqs_active)))) { |
| req = container_of(dev->rx_buffers.next, struct usb_request, |
| list); |
| list_del_init(&req->list); |
| list_add(&req->list, &dev->rx_reqs); |
| } |
| |
| while (likely(!(list_empty(&dev->tx_reqs_active)))) { |
| req = container_of(dev->tx_reqs_active.next, |
| struct usb_request, list); |
| list_del_init(&req->list); |
| list_add(&req->list, &dev->tx_reqs); |
| } |
| |
| if (usb_ep_enable(dev->in_ep, dev->in)) |
| DBG(dev, "Failed to enable USB in_ep\n"); |
| if (usb_ep_enable(dev->out_ep, dev->out)) |
| DBG(dev, "Failed to enable USB out_ep\n"); |
| |
| wake_up_interruptible(&dev->rx_wait); |
| wake_up_interruptible(&dev->tx_wait); |
| wake_up_interruptible(&dev->tx_flush_wait); |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| /* |
| * The setup() callback implements all the ep0 functionality that's not |
| * handled lower down. |
| */ |
| static int |
| printer_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) |
| { |
| struct printer_dev *dev = get_gadget_data(gadget); |
| struct usb_request *req = dev->req; |
| int value = -EOPNOTSUPP; |
| u16 wIndex = le16_to_cpu(ctrl->wIndex); |
| u16 wValue = le16_to_cpu(ctrl->wValue); |
| u16 wLength = le16_to_cpu(ctrl->wLength); |
| |
| DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength); |
| |
| req->complete = printer_setup_complete; |
| |
| switch (ctrl->bRequestType&USB_TYPE_MASK) { |
| |
| case USB_TYPE_STANDARD: |
| switch (ctrl->bRequest) { |
| |
| case USB_REQ_GET_DESCRIPTOR: |
| if (ctrl->bRequestType != USB_DIR_IN) |
| break; |
| switch (wValue >> 8) { |
| |
| case USB_DT_DEVICE: |
| value = min(wLength, (u16) sizeof device_desc); |
| memcpy(req->buf, &device_desc, value); |
| break; |
| #ifdef CONFIG_USB_GADGET_DUALSPEED |
| case USB_DT_DEVICE_QUALIFIER: |
| if (!gadget->is_dualspeed) |
| break; |
| value = min(wLength, |
| (u16) sizeof dev_qualifier); |
| memcpy(req->buf, &dev_qualifier, value); |
| break; |
| |
| case USB_DT_OTHER_SPEED_CONFIG: |
| if (!gadget->is_dualspeed) |
| break; |
| /* FALLTHROUGH */ |
| #endif /* CONFIG_USB_GADGET_DUALSPEED */ |
| case USB_DT_CONFIG: |
| value = config_buf(gadget->speed, req->buf, |
| wValue >> 8, |
| wValue & 0xff, |
| gadget->is_otg); |
| if (value >= 0) |
| value = min(wLength, (u16) value); |
| break; |
| |
| case USB_DT_STRING: |
| value = usb_gadget_get_string(&stringtab, |
| wValue & 0xff, req->buf); |
| if (value >= 0) |
| value = min(wLength, (u16) value); |
| break; |
| } |
| break; |
| |
| case USB_REQ_SET_CONFIGURATION: |
| if (ctrl->bRequestType != 0) |
| break; |
| if (gadget->a_hnp_support) |
| DBG(dev, "HNP available\n"); |
| else if (gadget->a_alt_hnp_support) |
| DBG(dev, "HNP needs a different root port\n"); |
| value = printer_set_config(dev, wValue); |
| if (!value) |
| value = set_interface(dev, PRINTER_INTERFACE); |
| break; |
| case USB_REQ_GET_CONFIGURATION: |
| if (ctrl->bRequestType != USB_DIR_IN) |
| break; |
| *(u8 *)req->buf = dev->config; |
| value = min(wLength, (u16) 1); |
| break; |
| |
| case USB_REQ_SET_INTERFACE: |
| if (ctrl->bRequestType != USB_RECIP_INTERFACE || |
| !dev->config) |
| break; |
| |
| value = set_interface(dev, PRINTER_INTERFACE); |
| break; |
| case USB_REQ_GET_INTERFACE: |
| if (ctrl->bRequestType != |
| (USB_DIR_IN|USB_RECIP_INTERFACE) |
| || !dev->config) |
| break; |
| |
| *(u8 *)req->buf = dev->interface; |
| value = min(wLength, (u16) 1); |
| break; |
| |
| default: |
| goto unknown; |
| } |
| break; |
| |
| case USB_TYPE_CLASS: |
| switch (ctrl->bRequest) { |
| case 0: /* Get the IEEE-1284 PNP String */ |
| /* Only one printer interface is supported. */ |
| if ((wIndex>>8) != PRINTER_INTERFACE) |
| break; |
| |
| value = (pnp_string[0]<<8)|pnp_string[1]; |
| memcpy(req->buf, pnp_string, value); |
| DBG(dev, "1284 PNP String: %x %s\n", value, |
| &pnp_string[2]); |
| break; |
| |
| case 1: /* Get Port Status */ |
| /* Only one printer interface is supported. */ |
| if (wIndex != PRINTER_INTERFACE) |
| break; |
| |
| *(u8 *)req->buf = dev->printer_status; |
| value = min(wLength, (u16) 1); |
| break; |
| |
| case 2: /* Soft Reset */ |
| /* Only one printer interface is supported. */ |
| if (wIndex != PRINTER_INTERFACE) |
| break; |
| |
| printer_soft_reset(dev); |
| |
| value = 0; |
| break; |
| |
| default: |
| goto unknown; |
| } |
| break; |
| |
| default: |
| unknown: |
| VDBG(dev, |
| "unknown ctrl req%02x.%02x v%04x i%04x l%d\n", |
| ctrl->bRequestType, ctrl->bRequest, |
| wValue, wIndex, wLength); |
| break; |
| } |
| |
| /* respond with data transfer before status phase? */ |
| if (value >= 0) { |
| req->length = value; |
| req->zero = value < wLength; |
| value = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); |
| if (value < 0) { |
| DBG(dev, "ep_queue --> %d\n", value); |
| req->status = 0; |
| printer_setup_complete(gadget->ep0, req); |
| } |
| } |
| |
| /* host either stalls (value < 0) or reports success */ |
| return value; |
| } |
| |
| static void |
| printer_disconnect(struct usb_gadget *gadget) |
| { |
| struct printer_dev *dev = get_gadget_data(gadget); |
| unsigned long flags; |
| |
| DBG(dev, "%s\n", __func__); |
| |
| spin_lock_irqsave(&dev->lock, flags); |
| |
| printer_reset_interface(dev); |
| |
| spin_unlock_irqrestore(&dev->lock, flags); |
| } |
| |
| static void |
| printer_unbind(struct usb_gadget *gadget) |
| { |
| struct printer_dev *dev = get_gadget_data(gadget); |
| struct usb_request *req; |
| |
| |
| DBG(dev, "%s\n", __func__); |
| |
| /* Remove sysfs files */ |
| device_destroy(usb_gadget_class, g_printer_devno); |
| |
| /* Remove Character Device */ |
| cdev_del(&dev->printer_cdev); |
| |
| /* we must already have been disconnected ... no i/o may be active */ |
| WARN_ON(!list_empty(&dev->tx_reqs_active)); |
| WARN_ON(!list_empty(&dev->rx_reqs_active)); |
| |
| /* Free all memory for this driver. */ |
| while (!list_empty(&dev->tx_reqs)) { |
| req = container_of(dev->tx_reqs.next, struct usb_request, |
| list); |
| list_del(&req->list); |
| printer_req_free(dev->in_ep, req); |
| } |
| |
| if (dev->current_rx_req != NULL) |
| printer_req_free(dev->out_ep, dev->current_rx_req); |
| |
| while (!list_empty(&dev->rx_reqs)) { |
| req = container_of(dev->rx_reqs.next, |
| struct usb_request, list); |
| list_del(&req->list); |
| printer_req_free(dev->out_ep, req); |
| } |
| |
| while (!list_empty(&dev->rx_buffers)) { |
| req = container_of(dev->rx_buffers.next, |
| struct usb_request, list); |
| list_del(&req->list); |
| printer_req_free(dev->out_ep, req); |
| } |
| |
| if (dev->req) { |
| printer_req_free(gadget->ep0, dev->req); |
| dev->req = NULL; |
| } |
| |
| set_gadget_data(gadget, NULL); |
| } |
| |
| static int __init |
| printer_bind(struct usb_gadget *gadget) |
| { |
| struct printer_dev *dev; |
| struct usb_ep *in_ep, *out_ep; |
| int status = -ENOMEM; |
| int gcnum; |
| size_t len; |
| u32 i; |
| struct usb_request *req; |
| |
| dev = &usb_printer_gadget; |
| |
| |
| /* Setup the sysfs files for the printer gadget. */ |
| dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno, |
| NULL, "g_printer"); |
| if (IS_ERR(dev->pdev)) { |
| ERROR(dev, "Failed to create device: g_printer\n"); |
| goto fail; |
| } |
| |
| /* |
| * Register a character device as an interface to a user mode |
| * program that handles the printer specific functionality. |
| */ |
| cdev_init(&dev->printer_cdev, &printer_io_operations); |
| dev->printer_cdev.owner = THIS_MODULE; |
| status = cdev_add(&dev->printer_cdev, g_printer_devno, 1); |
| if (status) { |
| ERROR(dev, "Failed to open char device\n"); |
| goto fail; |
| } |
| |
| gcnum = usb_gadget_controller_number(gadget); |
| if (gcnum >= 0) { |
| device_desc.bcdDevice = cpu_to_le16(0x0200 + gcnum); |
| } else { |
| dev_warn(&gadget->dev, "controller '%s' not recognized\n", |
| gadget->name); |
| /* unrecognized, but safe unless bulk is REALLY quirky */ |
| device_desc.bcdDevice = |
| cpu_to_le16(0xFFFF); |
| } |
| snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", |
| init_utsname()->sysname, init_utsname()->release, |
| gadget->name); |
| |
| device_desc.idVendor = |
| cpu_to_le16(PRINTER_VENDOR_NUM); |
| device_desc.idProduct = |
| cpu_to_le16(PRINTER_PRODUCT_NUM); |
| |
| /* support optional vendor/distro customization */ |
| if (idVendor) { |
| if (!idProduct) { |
| dev_err(&gadget->dev, "idVendor needs idProduct!\n"); |
| return -ENODEV; |
| } |
| device_desc.idVendor = cpu_to_le16(idVendor); |
| device_desc.idProduct = cpu_to_le16(idProduct); |
| if (bcdDevice) |
| device_desc.bcdDevice = cpu_to_le16(bcdDevice); |
| } |
| |
| if (iManufacturer) |
| strlcpy(manufacturer, iManufacturer, sizeof manufacturer); |
| |
| if (iProduct) |
| strlcpy(product_desc, iProduct, sizeof product_desc); |
| |
| if (iSerialNum) |
| strlcpy(serial_num, iSerialNum, sizeof serial_num); |
| |
| if (iPNPstring) |
| strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2); |
| |
| len = strlen(pnp_string); |
| pnp_string[0] = (len >> 8) & 0xFF; |
| pnp_string[1] = len & 0xFF; |
| |
| /* all we really need is bulk IN/OUT */ |
| usb_ep_autoconfig_reset(gadget); |
| in_ep = usb_ep_autoconfig(gadget, &fs_ep_in_desc); |
| if (!in_ep) { |
| autoconf_fail: |
| dev_err(&gadget->dev, "can't autoconfigure on %s\n", |
| gadget->name); |
| return -ENODEV; |
| } |
| in_ep->driver_data = in_ep; /* claim */ |
| |
| out_ep = usb_ep_autoconfig(gadget, &fs_ep_out_desc); |
| if (!out_ep) |
| goto autoconf_fail; |
| out_ep->driver_data = out_ep; /* claim */ |
| |
| #ifdef CONFIG_USB_GADGET_DUALSPEED |
| /* assumes ep0 uses the same value for both speeds ... */ |
| dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; |
| |
| /* and that all endpoints are dual-speed */ |
| hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress; |
| hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress; |
| #endif /* DUALSPEED */ |
| |
| device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; |
| usb_gadget_set_selfpowered(gadget); |
| |
| if (gadget->is_otg) { |
| otg_desc.bmAttributes |= USB_OTG_HNP, |
| config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP; |
| } |
| |
| spin_lock_init(&dev->lock); |
| mutex_init(&dev->lock_printer_io); |
| INIT_LIST_HEAD(&dev->tx_reqs); |
| INIT_LIST_HEAD(&dev->tx_reqs_active); |
| INIT_LIST_HEAD(&dev->rx_reqs); |
| INIT_LIST_HEAD(&dev->rx_reqs_active); |
| INIT_LIST_HEAD(&dev->rx_buffers); |
| init_waitqueue_head(&dev->rx_wait); |
| init_waitqueue_head(&dev->tx_wait); |
| init_waitqueue_head(&dev->tx_flush_wait); |
| |
| dev->config = 0; |
| dev->interface = -1; |
| dev->printer_cdev_open = 0; |
| dev->printer_status = PRINTER_NOT_ERROR; |
| dev->current_rx_req = NULL; |
| dev->current_rx_bytes = 0; |
| dev->current_rx_buf = NULL; |
| |
| dev->in_ep = in_ep; |
| dev->out_ep = out_ep; |
| |
| /* preallocate control message data and buffer */ |
| dev->req = printer_req_alloc(gadget->ep0, USB_DESC_BUFSIZE, |
| GFP_KERNEL); |
| if (!dev->req) { |
| status = -ENOMEM; |
| goto fail; |
| } |
| |
| for (i = 0; i < QLEN; i++) { |
| req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL); |
| if (!req) { |
| while (!list_empty(&dev->tx_reqs)) { |
| req = container_of(dev->tx_reqs.next, |
| struct usb_request, list); |
| list_del(&req->list); |
| printer_req_free(dev->in_ep, req); |
| } |
| return -ENOMEM; |
| } |
| list_add(&req->list, &dev->tx_reqs); |
| } |
| |
| for (i = 0; i < QLEN; i++) { |
| req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL); |
| if (!req) { |
| while (!list_empty(&dev->rx_reqs)) { |
| req = container_of(dev->rx_reqs.next, |
| struct usb_request, list); |
| list_del(&req->list); |
| printer_req_free(dev->out_ep, req); |
| } |
| return -ENOMEM; |
| } |
| list_add(&req->list, &dev->rx_reqs); |
| } |
| |
| dev->req->complete = printer_setup_complete; |
| |
| /* finish hookup to lower layer ... */ |
| dev->gadget = gadget; |
| set_gadget_data(gadget, dev); |
| gadget->ep0->driver_data = dev; |
| |
| INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc); |
| INFO(dev, "using %s, OUT %s IN %s\n", gadget->name, out_ep->name, |
| in_ep->name); |
| |
| return 0; |
| |
| fail: |
| printer_unbind(gadget); |
| return status; |
| } |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static struct usb_gadget_driver printer_driver = { |
| .speed = DEVSPEED, |
| |
| .function = (char *) driver_desc, |
| .unbind = printer_unbind, |
| |
| .setup = printer_setup, |
| .disconnect = printer_disconnect, |
| |
| .driver = { |
| .name = (char *) shortname, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_AUTHOR("Craig Nadler"); |
| MODULE_LICENSE("GPL"); |
| |
| static int __init |
| init(void) |
| { |
| int status; |
| |
| usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget"); |
| if (IS_ERR(usb_gadget_class)) { |
| status = PTR_ERR(usb_gadget_class); |
| ERROR(dev, "unable to create usb_gadget class %d\n", status); |
| return status; |
| } |
| |
| status = alloc_chrdev_region(&g_printer_devno, 0, 1, |
| "USB printer gadget"); |
| if (status) { |
| ERROR(dev, "alloc_chrdev_region %d\n", status); |
| class_destroy(usb_gadget_class); |
| return status; |
| } |
| |
| status = usb_gadget_probe_driver(&printer_driver, printer_bind); |
| if (status) { |
| class_destroy(usb_gadget_class); |
| unregister_chrdev_region(g_printer_devno, 1); |
| DBG(dev, "usb_gadget_probe_driver %x\n", status); |
| } |
| |
| return status; |
| } |
| module_init(init); |
| |
| static void __exit |
| cleanup(void) |
| { |
| int status; |
| |
| mutex_lock(&usb_printer_gadget.lock_printer_io); |
| status = usb_gadget_unregister_driver(&printer_driver); |
| if (status) |
| ERROR(dev, "usb_gadget_unregister_driver %x\n", status); |
| |
| unregister_chrdev_region(g_printer_devno, 2); |
| class_destroy(usb_gadget_class); |
| mutex_unlock(&usb_printer_gadget.lock_printer_io); |
| } |
| module_exit(cleanup); |