| /* |
| * Siemens Gigaset 307x driver |
| * Common header file for all connection variants |
| * |
| * Written by Stefan Eilers |
| * and Hansjoerg Lipp <hjlipp@web.de> |
| * |
| * ===================================================================== |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * ===================================================================== |
| */ |
| |
| #ifndef GIGASET_H |
| #define GIGASET_H |
| |
| /* define global prefix for pr_ macros in linux/kernel.h */ |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/compiler.h> |
| #include <linux/types.h> |
| #include <linux/ctype.h> |
| #include <linux/slab.h> |
| #include <linux/spinlock.h> |
| #include <linux/skbuff.h> |
| #include <linux/netdevice.h> |
| #include <linux/ppp_defs.h> |
| #include <linux/timer.h> |
| #include <linux/interrupt.h> |
| #include <linux/tty.h> |
| #include <linux/tty_driver.h> |
| #include <linux/list.h> |
| #include <asm/atomic.h> |
| |
| #define GIG_VERSION {0, 5, 0, 0} |
| #define GIG_COMPAT {0, 4, 0, 0} |
| |
| #define MAX_REC_PARAMS 10 /* Max. number of params in response string */ |
| #define MAX_RESP_SIZE 511 /* Max. size of a response string */ |
| |
| #define MAX_EVENTS 64 /* size of event queue */ |
| |
| #define RBUFSIZE 8192 |
| #define SBUFSIZE 4096 /* sk_buff payload size */ |
| |
| #define TRANSBUFSIZE 768 /* bytes per skb for transparent receive */ |
| #define MAX_BUF_SIZE (SBUFSIZE - 2) /* Max. size of a data packet from LL */ |
| |
| /* compile time options */ |
| #define GIG_MAJOR 0 |
| |
| #define GIG_MAYINITONDIAL |
| #define GIG_RETRYCID |
| #define GIG_X75 |
| |
| #define GIG_TICK 100 /* in milliseconds */ |
| |
| /* timeout values (unit: 1 sec) */ |
| #define INIT_TIMEOUT 1 |
| |
| /* timeout values (unit: 0.1 sec) */ |
| #define RING_TIMEOUT 3 /* for additional parameters to RING */ |
| #define BAS_TIMEOUT 20 /* for response to Base USB ops */ |
| #define ATRDY_TIMEOUT 3 /* for HD_READY_SEND_ATDATA */ |
| |
| #define BAS_RETRY 3 /* max. retries for base USB ops */ |
| |
| #define MAXACT 3 |
| |
| extern int gigaset_debuglevel; /* "needs" cast to (enum debuglevel) */ |
| |
| /* debug flags, combine by adding/bitwise OR */ |
| enum debuglevel { |
| DEBUG_INTR = 0x00008, /* interrupt processing */ |
| DEBUG_CMD = 0x00020, /* sent/received LL commands */ |
| DEBUG_STREAM = 0x00040, /* application data stream I/O events */ |
| DEBUG_STREAM_DUMP = 0x00080, /* application data stream content */ |
| DEBUG_LLDATA = 0x00100, /* sent/received LL data */ |
| DEBUG_EVENT = 0x00200, /* event processing */ |
| DEBUG_DRIVER = 0x00400, /* driver structure */ |
| DEBUG_HDLC = 0x00800, /* M10x HDLC processing */ |
| DEBUG_CHANNEL = 0x01000, /* channel allocation/deallocation */ |
| DEBUG_TRANSCMD = 0x02000, /* AT-COMMANDS+RESPONSES */ |
| DEBUG_MCMD = 0x04000, /* COMMANDS THAT ARE SENT VERY OFTEN */ |
| DEBUG_INIT = 0x08000, /* (de)allocation+initialization of data |
| structures */ |
| DEBUG_SUSPEND = 0x10000, /* suspend/resume processing */ |
| DEBUG_OUTPUT = 0x20000, /* output to device */ |
| DEBUG_ISO = 0x40000, /* isochronous transfers */ |
| DEBUG_IF = 0x80000, /* character device operations */ |
| DEBUG_USBREQ = 0x100000, /* USB communication (except payload |
| data) */ |
| DEBUG_LOCKCMD = 0x200000, /* AT commands and responses when |
| MS_LOCKED */ |
| |
| DEBUG_ANY = 0x3fffff, /* print message if any of the others is |
| activated */ |
| }; |
| |
| #ifdef CONFIG_GIGASET_DEBUG |
| |
| #define gig_dbg(level, format, arg...) \ |
| do { \ |
| if (unlikely(((enum debuglevel)gigaset_debuglevel) & (level))) \ |
| printk(KERN_DEBUG KBUILD_MODNAME ": " format "\n", \ |
| ## arg); \ |
| } while (0) |
| #define DEBUG_DEFAULT (DEBUG_TRANSCMD | DEBUG_CMD | DEBUG_USBREQ) |
| |
| #else |
| |
| #define gig_dbg(level, format, arg...) do {} while (0) |
| #define DEBUG_DEFAULT 0 |
| |
| #endif |
| |
| void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg, |
| size_t len, const unsigned char *buf); |
| |
| /* connection state */ |
| #define ZSAU_NONE 0 |
| #define ZSAU_DISCONNECT_IND 4 |
| #define ZSAU_OUTGOING_CALL_PROCEEDING 1 |
| #define ZSAU_PROCEEDING 1 |
| #define ZSAU_CALL_DELIVERED 2 |
| #define ZSAU_ACTIVE 3 |
| #define ZSAU_NULL 5 |
| #define ZSAU_DISCONNECT_REQ 6 |
| #define ZSAU_UNKNOWN -1 |
| |
| /* USB control transfer requests */ |
| #define OUT_VENDOR_REQ (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT) |
| #define IN_VENDOR_REQ (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT) |
| |
| /* interrupt pipe messages */ |
| #define HD_B1_FLOW_CONTROL 0x80 |
| #define HD_B2_FLOW_CONTROL 0x81 |
| #define HD_RECEIVEATDATA_ACK (0x35) /* 3070 */ |
| #define HD_READY_SEND_ATDATA (0x36) /* 3070 */ |
| #define HD_OPEN_ATCHANNEL_ACK (0x37) /* 3070 */ |
| #define HD_CLOSE_ATCHANNEL_ACK (0x38) /* 3070 */ |
| #define HD_DEVICE_INIT_OK (0x11) /* ISurf USB + 3070 */ |
| #define HD_OPEN_B1CHANNEL_ACK (0x51) /* ISurf USB + 3070 */ |
| #define HD_OPEN_B2CHANNEL_ACK (0x52) /* ISurf USB + 3070 */ |
| #define HD_CLOSE_B1CHANNEL_ACK (0x53) /* ISurf USB + 3070 */ |
| #define HD_CLOSE_B2CHANNEL_ACK (0x54) /* ISurf USB + 3070 */ |
| #define HD_SUSPEND_END (0x61) /* ISurf USB */ |
| #define HD_RESET_INTERRUPT_PIPE_ACK (0xFF) /* ISurf USB + 3070 */ |
| |
| /* control requests */ |
| #define HD_OPEN_B1CHANNEL (0x23) /* ISurf USB + 3070 */ |
| #define HD_CLOSE_B1CHANNEL (0x24) /* ISurf USB + 3070 */ |
| #define HD_OPEN_B2CHANNEL (0x25) /* ISurf USB + 3070 */ |
| #define HD_CLOSE_B2CHANNEL (0x26) /* ISurf USB + 3070 */ |
| #define HD_RESET_INTERRUPT_PIPE (0x27) /* ISurf USB + 3070 */ |
| #define HD_DEVICE_INIT_ACK (0x34) /* ISurf USB + 3070 */ |
| #define HD_WRITE_ATMESSAGE (0x12) /* 3070 */ |
| #define HD_READ_ATMESSAGE (0x13) /* 3070 */ |
| #define HD_OPEN_ATCHANNEL (0x28) /* 3070 */ |
| #define HD_CLOSE_ATCHANNEL (0x29) /* 3070 */ |
| |
| /* number of B channels supported by base driver */ |
| #define BAS_CHANNELS 2 |
| |
| /* USB frames for isochronous transfer */ |
| #define BAS_FRAMETIME 1 /* number of milliseconds between frames */ |
| #define BAS_NUMFRAMES 8 /* number of frames per URB */ |
| #define BAS_MAXFRAME 16 /* allocated bytes per frame */ |
| #define BAS_NORMFRAME 8 /* send size without flow control */ |
| #define BAS_HIGHFRAME 10 /* " " with positive flow control */ |
| #define BAS_LOWFRAME 5 /* " " with negative flow control */ |
| #define BAS_CORRFRAMES 4 /* flow control multiplicator */ |
| |
| #define BAS_INBUFSIZE (BAS_MAXFRAME * BAS_NUMFRAMES) |
| /* size of isoc in buf per URB */ |
| #define BAS_OUTBUFSIZE 4096 /* size of common isoc out buffer */ |
| #define BAS_OUTBUFPAD BAS_MAXFRAME /* size of pad area for isoc out buf */ |
| |
| #define BAS_INURBS 3 |
| #define BAS_OUTURBS 3 |
| |
| /* variable commands in struct bc_state */ |
| #define AT_ISO 0 |
| #define AT_DIAL 1 |
| #define AT_MSN 2 |
| #define AT_BC 3 |
| #define AT_PROTO 4 |
| #define AT_TYPE 5 |
| #define AT_HLC 6 |
| #define AT_CLIP 7 |
| /* total number */ |
| #define AT_NUM 8 |
| |
| /* variables in struct at_state_t */ |
| #define VAR_ZSAU 0 |
| #define VAR_ZDLE 1 |
| #define VAR_ZVLS 2 |
| #define VAR_ZCTP 3 |
| #define VAR_NUM 4 |
| |
| #define STR_NMBR 0 |
| #define STR_ZCPN 1 |
| #define STR_ZCON 2 |
| #define STR_ZBC 3 |
| #define STR_ZHLC 4 |
| #define STR_NUM 5 |
| |
| #define EV_TIMEOUT -105 |
| #define EV_IF_VER -106 |
| #define EV_PROC_CIDMODE -107 |
| #define EV_SHUTDOWN -108 |
| #define EV_START -110 |
| #define EV_STOP -111 |
| #define EV_IF_LOCK -112 |
| #define EV_ACCEPT -114 |
| #define EV_DIAL -115 |
| #define EV_HUP -116 |
| #define EV_BC_OPEN -117 |
| #define EV_BC_CLOSED -118 |
| |
| /* input state */ |
| #define INS_command 0x0001 /* receiving messages (not payload data) */ |
| #define INS_DLE_char 0x0002 /* DLE flag received (in DLE mode) */ |
| #define INS_byte_stuff 0x0004 |
| #define INS_have_data 0x0008 |
| #define INS_DLE_command 0x0020 /* DLE message start (<DLE> X) received */ |
| #define INS_flag_hunt 0x0040 |
| |
| /* channel state */ |
| #define CHS_D_UP 0x01 |
| #define CHS_B_UP 0x02 |
| #define CHS_NOTIFY_LL 0x04 |
| |
| #define ICALL_REJECT 0 |
| #define ICALL_ACCEPT 1 |
| #define ICALL_IGNORE 2 |
| |
| /* device state */ |
| #define MS_UNINITIALIZED 0 |
| #define MS_INIT 1 |
| #define MS_LOCKED 2 |
| #define MS_SHUTDOWN 3 |
| #define MS_RECOVER 4 |
| #define MS_READY 5 |
| |
| /* mode */ |
| #define M_UNKNOWN 0 |
| #define M_CONFIG 1 |
| #define M_UNIMODEM 2 |
| #define M_CID 3 |
| |
| /* start mode */ |
| #define SM_LOCKED 0 |
| #define SM_ISDN 1 /* default */ |
| |
| /* layer 2 protocols (AT^SBPR=...) */ |
| #define L2_BITSYNC 0 |
| #define L2_HDLC 1 |
| #define L2_VOICE 2 |
| |
| struct gigaset_ops; |
| struct gigaset_driver; |
| |
| struct usb_cardstate; |
| struct ser_cardstate; |
| struct bas_cardstate; |
| |
| struct bc_state; |
| struct usb_bc_state; |
| struct ser_bc_state; |
| struct bas_bc_state; |
| |
| struct reply_t { |
| int resp_code; /* RSP_XXXX */ |
| int min_ConState; /* <0 => ignore */ |
| int max_ConState; /* <0 => ignore */ |
| int parameter; /* e.g. ZSAU_XXXX <0: ignore*/ |
| int new_ConState; /* <0 => ignore */ |
| int timeout; /* >0 => *HZ; <=0 => TOUT_XXXX*/ |
| int action[MAXACT]; /* ACT_XXXX */ |
| char *command; /* NULL==none */ |
| }; |
| |
| extern struct reply_t gigaset_tab_cid[]; |
| extern struct reply_t gigaset_tab_nocid[]; |
| |
| struct inbuf_t { |
| struct cardstate *cs; |
| int inputstate; |
| int head, tail; |
| unsigned char data[RBUFSIZE]; |
| }; |
| |
| /* isochronous write buffer structure |
| * circular buffer with pad area for extraction of complete USB frames |
| * - data[read..nextread-1] is valid data already submitted to the USB subsystem |
| * - data[nextread..write-1] is valid data yet to be sent |
| * - data[write] is the next byte to write to |
| * - in byte-oriented L2 procotols, it is completely free |
| * - in bit-oriented L2 procotols, it may contain a partial byte of valid data |
| * - data[write+1..read-1] is free |
| * - wbits is the number of valid data bits in data[write], starting at the LSB |
| * - writesem is the semaphore for writing to the buffer: |
| * if writesem <= 0, data[write..read-1] is currently being written to |
| * - idle contains the byte value to repeat when the end of valid data is |
| * reached; if nextread==write (buffer contains no data to send), either the |
| * BAS_OUTBUFPAD bytes immediately before data[write] (if |
| * write>=BAS_OUTBUFPAD) or those of the pad area (if write<BAS_OUTBUFPAD) |
| * are also filled with that value |
| */ |
| struct isowbuf_t { |
| int read; |
| int nextread; |
| int write; |
| atomic_t writesem; |
| int wbits; |
| unsigned char data[BAS_OUTBUFSIZE + BAS_OUTBUFPAD]; |
| unsigned char idle; |
| }; |
| |
| /* isochronous write URB context structure |
| * data to be stored along with the URB and retrieved when it is returned |
| * as completed by the USB subsystem |
| * - urb: pointer to the URB itself |
| * - bcs: pointer to the B Channel control structure |
| * - limit: end of write buffer area covered by this URB |
| * - status: URB completion status |
| */ |
| struct isow_urbctx_t { |
| struct urb *urb; |
| struct bc_state *bcs; |
| int limit; |
| int status; |
| }; |
| |
| /* AT state structure |
| * data associated with the state of an ISDN connection, whether or not |
| * it is currently assigned a B channel |
| */ |
| struct at_state_t { |
| struct list_head list; |
| int waiting; |
| int getstring; |
| unsigned timer_index; |
| unsigned long timer_expires; |
| int timer_active; |
| unsigned int ConState; /* State of connection */ |
| struct reply_t *replystruct; |
| int cid; |
| int int_var[VAR_NUM]; /* see VAR_XXXX */ |
| char *str_var[STR_NUM]; /* see STR_XXXX */ |
| unsigned pending_commands; /* see PC_XXXX */ |
| unsigned seq_index; |
| |
| struct cardstate *cs; |
| struct bc_state *bcs; |
| }; |
| |
| struct event_t { |
| int type; |
| void *ptr, *arg; |
| int parameter; |
| int cid; |
| struct at_state_t *at_state; |
| }; |
| |
| /* This buffer holds all information about the used B-Channel */ |
| struct bc_state { |
| struct sk_buff *tx_skb; /* Current transfer buffer to modem */ |
| struct sk_buff_head squeue; /* B-Channel send Queue */ |
| |
| /* Variables for debugging .. */ |
| int corrupted; /* Counter for corrupted packages */ |
| int trans_down; /* Counter of packages (downstream) */ |
| int trans_up; /* Counter of packages (upstream) */ |
| |
| struct at_state_t at_state; |
| |
| __u16 fcs; |
| struct sk_buff *skb; |
| int inputstate; /* see INS_XXXX */ |
| |
| int channel; |
| |
| struct cardstate *cs; |
| |
| unsigned chstate; /* bitmap (CHS_*) */ |
| int ignore; |
| unsigned proto2; /* layer 2 protocol (L2_*) */ |
| char *commands[AT_NUM]; /* see AT_XXXX */ |
| |
| #ifdef CONFIG_GIGASET_DEBUG |
| int emptycount; |
| #endif |
| int busy; |
| int use_count; |
| |
| /* private data of hardware drivers */ |
| union { |
| struct ser_bc_state *ser; /* serial hardware driver */ |
| struct usb_bc_state *usb; /* usb hardware driver (m105) */ |
| struct bas_bc_state *bas; /* usb hardware driver (base) */ |
| } hw; |
| |
| void *ap; /* LL application structure */ |
| }; |
| |
| struct cardstate { |
| struct gigaset_driver *driver; |
| unsigned minor_index; |
| struct device *dev; |
| struct device *tty_dev; |
| unsigned flags; |
| |
| const struct gigaset_ops *ops; |
| |
| /* Stuff to handle communication */ |
| wait_queue_head_t waitqueue; |
| int waiting; |
| int mode; /* see M_XXXX */ |
| int mstate; /* Modem state: see MS_XXXX */ |
| /* only changed by the event layer */ |
| int cmd_result; |
| |
| int channels; |
| struct bc_state *bcs; /* Array of struct bc_state */ |
| |
| int onechannel; /* data and commands transmitted in one |
| stream (M10x) */ |
| |
| spinlock_t lock; |
| struct at_state_t at_state; /* at_state_t for cid == 0 */ |
| struct list_head temp_at_states;/* list of temporary "struct |
| at_state_t"s without B channel */ |
| |
| struct inbuf_t *inbuf; |
| |
| struct cmdbuf_t *cmdbuf, *lastcmdbuf; |
| spinlock_t cmdlock; |
| unsigned curlen, cmdbytes; |
| |
| unsigned open_count; |
| struct tty_struct *tty; |
| struct tasklet_struct if_wake_tasklet; |
| unsigned control_state; |
| |
| unsigned fwver[4]; |
| int gotfwver; |
| |
| unsigned running; /* !=0 if events are handled */ |
| unsigned connected; /* !=0 if hardware is connected */ |
| unsigned isdn_up; /* !=0 after gigaset_isdn_start() */ |
| |
| unsigned cidmode; |
| |
| int myid; /* id for communication with LL */ |
| void *iif; /* LL interface structure */ |
| unsigned short hw_hdr_len; /* headroom needed in data skbs */ |
| |
| struct reply_t *tabnocid; |
| struct reply_t *tabcid; |
| int cs_init; |
| int ignoreframes; /* frames to ignore after setting up the |
| B channel */ |
| struct mutex mutex; /* locks this structure: |
| * connected is not changed, |
| * hardware_up is not changed, |
| * MState is not changed to or from |
| * MS_LOCKED */ |
| |
| struct timer_list timer; |
| int retry_count; |
| int dle; /* !=0 if DLE mode is active |
| (ZDLE=1 received -- M10x only) */ |
| int cur_at_seq; /* sequence of AT commands being |
| processed */ |
| int curchannel; /* channel those commands are meant |
| for */ |
| int commands_pending; /* flag(s) in xxx.commands_pending have |
| been set */ |
| struct tasklet_struct event_tasklet; |
| /* tasklet for serializing AT commands. |
| * Scheduled |
| * -> for modem reponses (and |
| * incoming data for M10x) |
| * -> on timeout |
| * -> after setting bits in |
| * xxx.at_state.pending_command |
| * (e.g. command from LL) */ |
| struct tasklet_struct write_tasklet; |
| /* tasklet for serial output |
| * (not used in base driver) */ |
| |
| /* event queue */ |
| struct event_t events[MAX_EVENTS]; |
| unsigned ev_tail, ev_head; |
| spinlock_t ev_lock; |
| |
| /* current modem response */ |
| unsigned char respdata[MAX_RESP_SIZE+1]; |
| unsigned cbytes; |
| |
| /* private data of hardware drivers */ |
| union { |
| struct usb_cardstate *usb; /* USB hardware driver (m105) */ |
| struct ser_cardstate *ser; /* serial hardware driver */ |
| struct bas_cardstate *bas; /* USB hardware driver (base) */ |
| } hw; |
| }; |
| |
| struct gigaset_driver { |
| struct list_head list; |
| spinlock_t lock; /* locks minor tables and blocked */ |
| struct tty_driver *tty; |
| unsigned have_tty; |
| unsigned minor; |
| unsigned minors; |
| struct cardstate *cs; |
| int blocked; |
| |
| const struct gigaset_ops *ops; |
| struct module *owner; |
| }; |
| |
| struct cmdbuf_t { |
| struct cmdbuf_t *next, *prev; |
| int len, offset; |
| struct tasklet_struct *wake_tasklet; |
| unsigned char buf[0]; |
| }; |
| |
| struct bas_bc_state { |
| /* isochronous output state */ |
| int running; |
| atomic_t corrbytes; |
| spinlock_t isooutlock; |
| struct isow_urbctx_t isoouturbs[BAS_OUTURBS]; |
| struct isow_urbctx_t *isooutdone, *isooutfree, *isooutovfl; |
| struct isowbuf_t *isooutbuf; |
| unsigned numsub; /* submitted URB counter |
| (for diagnostic messages only) */ |
| struct tasklet_struct sent_tasklet; |
| |
| /* isochronous input state */ |
| spinlock_t isoinlock; |
| struct urb *isoinurbs[BAS_INURBS]; |
| unsigned char isoinbuf[BAS_INBUFSIZE * BAS_INURBS]; |
| struct urb *isoindone; /* completed isoc read URB */ |
| int isoinstatus; /* status of completed URB */ |
| int loststatus; /* status of dropped URB */ |
| unsigned isoinlost; /* number of bytes lost */ |
| /* state of bit unstuffing algorithm |
| (in addition to BC_state.inputstate) */ |
| unsigned seqlen; /* number of '1' bits not yet |
| unstuffed */ |
| unsigned inbyte, inbits; /* collected bits for next byte */ |
| /* statistics */ |
| unsigned goodbytes; /* bytes correctly received */ |
| unsigned alignerrs; /* frames with incomplete byte at end */ |
| unsigned fcserrs; /* FCS errors */ |
| unsigned frameerrs; /* framing errors */ |
| unsigned giants; /* long frames */ |
| unsigned runts; /* short frames */ |
| unsigned aborts; /* HDLC aborts */ |
| unsigned shared0s; /* '0' bits shared between flags */ |
| unsigned stolen0s; /* '0' stuff bits also serving as |
| leading flag bits */ |
| struct tasklet_struct rcvd_tasklet; |
| }; |
| |
| struct gigaset_ops { |
| /* Called from ev-layer.c/interface.c for sending AT commands to the |
| device */ |
| int (*write_cmd)(struct cardstate *cs, |
| const unsigned char *buf, int len, |
| struct tasklet_struct *wake_tasklet); |
| |
| /* Called from interface.c for additional device control */ |
| int (*write_room)(struct cardstate *cs); |
| int (*chars_in_buffer)(struct cardstate *cs); |
| int (*brkchars)(struct cardstate *cs, const unsigned char buf[6]); |
| |
| /* Called from ev-layer.c after setting up connection |
| * Should call gigaset_bchannel_up(), when finished. */ |
| int (*init_bchannel)(struct bc_state *bcs); |
| |
| /* Called from ev-layer.c after hanging up |
| * Should call gigaset_bchannel_down(), when finished. */ |
| int (*close_bchannel)(struct bc_state *bcs); |
| |
| /* Called by gigaset_initcs() for setting up bcs->hw.xxx */ |
| int (*initbcshw)(struct bc_state *bcs); |
| |
| /* Called by gigaset_freecs() for freeing bcs->hw.xxx */ |
| int (*freebcshw)(struct bc_state *bcs); |
| |
| /* Called by gigaset_bchannel_down() for resetting bcs->hw.xxx */ |
| void (*reinitbcshw)(struct bc_state *bcs); |
| |
| /* Called by gigaset_initcs() for setting up cs->hw.xxx */ |
| int (*initcshw)(struct cardstate *cs); |
| |
| /* Called by gigaset_freecs() for freeing cs->hw.xxx */ |
| void (*freecshw)(struct cardstate *cs); |
| |
| /* Called from common.c/interface.c for additional serial port |
| control */ |
| int (*set_modem_ctrl)(struct cardstate *cs, unsigned old_state, |
| unsigned new_state); |
| int (*baud_rate)(struct cardstate *cs, unsigned cflag); |
| int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag); |
| |
| /* Called from LL interface to put an skb into the send-queue. |
| * After sending is completed, gigaset_skb_sent() must be called |
| * with the skb's link layer header preserved. */ |
| int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb); |
| |
| /* Called from ev-layer.c to process a block of data |
| * received through the common/control channel. */ |
| void (*handle_input)(struct inbuf_t *inbuf); |
| |
| }; |
| |
| /* = Common structures and definitions ======================================= |
| */ |
| |
| /* Parser states for DLE-Event: |
| * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "." |
| * <DLE_FLAG>: 0x10 |
| * <EVENT>: ((a-z)* | (A-Z)* | (0-10)*)+ |
| */ |
| #define DLE_FLAG 0x10 |
| |
| /* =========================================================================== |
| * Functions implemented in asyncdata.c |
| */ |
| |
| /* Called from LL interface to put an skb into the send queue. */ |
| int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb); |
| |
| /* Called from ev-layer.c to process a block of data |
| * received through the common/control channel. */ |
| void gigaset_m10x_input(struct inbuf_t *inbuf); |
| |
| /* =========================================================================== |
| * Functions implemented in isocdata.c |
| */ |
| |
| /* Called from LL interface to put an skb into the send queue. */ |
| int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb); |
| |
| /* Called from ev-layer.c to process a block of data |
| * received through the common/control channel. */ |
| void gigaset_isoc_input(struct inbuf_t *inbuf); |
| |
| /* Called from bas-gigaset.c to process a block of data |
| * received through the isochronous channel */ |
| void gigaset_isoc_receive(unsigned char *src, unsigned count, |
| struct bc_state *bcs); |
| |
| /* Called from bas-gigaset.c to put a block of data |
| * into the isochronous output buffer */ |
| int gigaset_isoc_buildframe(struct bc_state *bcs, unsigned char *in, int len); |
| |
| /* Called from bas-gigaset.c to initialize the isochronous output buffer */ |
| void gigaset_isowbuf_init(struct isowbuf_t *iwb, unsigned char idle); |
| |
| /* Called from bas-gigaset.c to retrieve a block of bytes for sending */ |
| int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size); |
| |
| /* =========================================================================== |
| * Functions implemented in LL interface |
| */ |
| |
| /* Called from common.c for setting up/shutting down with the ISDN subsystem */ |
| void gigaset_isdn_regdrv(void); |
| void gigaset_isdn_unregdrv(void); |
| int gigaset_isdn_regdev(struct cardstate *cs, const char *isdnid); |
| void gigaset_isdn_unregdev(struct cardstate *cs); |
| |
| /* Called from hardware module to indicate completion of an skb */ |
| void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb); |
| void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb); |
| void gigaset_isdn_rcv_err(struct bc_state *bcs); |
| |
| /* Called from common.c/ev-layer.c to indicate events relevant to the LL */ |
| void gigaset_isdn_start(struct cardstate *cs); |
| void gigaset_isdn_stop(struct cardstate *cs); |
| int gigaset_isdn_icall(struct at_state_t *at_state); |
| void gigaset_isdn_connD(struct bc_state *bcs); |
| void gigaset_isdn_hupD(struct bc_state *bcs); |
| void gigaset_isdn_connB(struct bc_state *bcs); |
| void gigaset_isdn_hupB(struct bc_state *bcs); |
| |
| /* =========================================================================== |
| * Functions implemented in ev-layer.c |
| */ |
| |
| /* tasklet called from common.c to process queued events */ |
| void gigaset_handle_event(unsigned long data); |
| |
| /* called from isocdata.c / asyncdata.c |
| * when a complete modem response line has been received */ |
| void gigaset_handle_modem_response(struct cardstate *cs); |
| |
| /* =========================================================================== |
| * Functions implemented in proc.c |
| */ |
| |
| /* initialize sysfs for device */ |
| void gigaset_init_dev_sysfs(struct cardstate *cs); |
| void gigaset_free_dev_sysfs(struct cardstate *cs); |
| |
| /* =========================================================================== |
| * Functions implemented in common.c/gigaset.h |
| */ |
| |
| void gigaset_bcs_reinit(struct bc_state *bcs); |
| void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs, |
| struct cardstate *cs, int cid); |
| int gigaset_get_channel(struct bc_state *bcs); |
| struct bc_state *gigaset_get_free_channel(struct cardstate *cs); |
| void gigaset_free_channel(struct bc_state *bcs); |
| int gigaset_get_channels(struct cardstate *cs); |
| void gigaset_free_channels(struct cardstate *cs); |
| void gigaset_block_channels(struct cardstate *cs); |
| |
| /* Allocate and initialize driver structure. */ |
| struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors, |
| const char *procname, |
| const char *devname, |
| const struct gigaset_ops *ops, |
| struct module *owner); |
| |
| /* Deallocate driver structure. */ |
| void gigaset_freedriver(struct gigaset_driver *drv); |
| void gigaset_debugdrivers(void); |
| struct cardstate *gigaset_get_cs_by_tty(struct tty_struct *tty); |
| struct cardstate *gigaset_get_cs_by_id(int id); |
| void gigaset_blockdriver(struct gigaset_driver *drv); |
| |
| /* Allocate and initialize card state. Calls hardware dependent |
| gigaset_init[b]cs(). */ |
| struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels, |
| int onechannel, int ignoreframes, |
| int cidmode, const char *modulename); |
| |
| /* Free card state. Calls hardware dependent gigaset_free[b]cs(). */ |
| void gigaset_freecs(struct cardstate *cs); |
| |
| /* Tell common.c that hardware and driver are ready. */ |
| int gigaset_start(struct cardstate *cs); |
| |
| /* Tell common.c that the device is not present any more. */ |
| void gigaset_stop(struct cardstate *cs); |
| |
| /* Tell common.c that the driver is being unloaded. */ |
| int gigaset_shutdown(struct cardstate *cs); |
| |
| /* Tell common.c that an skb has been sent. */ |
| void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb); |
| |
| /* Append event to the queue. |
| * Returns NULL on failure or a pointer to the event on success. |
| * ptr must be kmalloc()ed (and not be freed by the caller). |
| */ |
| struct event_t *gigaset_add_event(struct cardstate *cs, |
| struct at_state_t *at_state, int type, |
| void *ptr, int parameter, void *arg); |
| |
| /* Called on CONFIG1 command from frontend. */ |
| int gigaset_enterconfigmode(struct cardstate *cs); |
| |
| /* cs->lock must not be locked */ |
| static inline void gigaset_schedule_event(struct cardstate *cs) |
| { |
| unsigned long flags; |
| spin_lock_irqsave(&cs->lock, flags); |
| if (cs->running) |
| tasklet_schedule(&cs->event_tasklet); |
| spin_unlock_irqrestore(&cs->lock, flags); |
| } |
| |
| /* Tell common.c that B channel has been closed. */ |
| /* cs->lock must not be locked */ |
| static inline void gigaset_bchannel_down(struct bc_state *bcs) |
| { |
| gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_CLOSED, NULL, 0, NULL); |
| gigaset_schedule_event(bcs->cs); |
| } |
| |
| /* Tell common.c that B channel has been opened. */ |
| /* cs->lock must not be locked */ |
| static inline void gigaset_bchannel_up(struct bc_state *bcs) |
| { |
| gigaset_add_event(bcs->cs, &bcs->at_state, EV_BC_OPEN, NULL, 0, NULL); |
| gigaset_schedule_event(bcs->cs); |
| } |
| |
| /* handling routines for sk_buff */ |
| /* ============================= */ |
| |
| /* append received bytes to inbuf */ |
| int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src, |
| unsigned numbytes); |
| |
| /* =========================================================================== |
| * Functions implemented in interface.c |
| */ |
| |
| /* initialize interface */ |
| void gigaset_if_initdriver(struct gigaset_driver *drv, const char *procname, |
| const char *devname); |
| /* release interface */ |
| void gigaset_if_freedriver(struct gigaset_driver *drv); |
| /* add minor */ |
| void gigaset_if_init(struct cardstate *cs); |
| /* remove minor */ |
| void gigaset_if_free(struct cardstate *cs); |
| /* device received data */ |
| void gigaset_if_receive(struct cardstate *cs, |
| unsigned char *buffer, size_t len); |
| |
| #endif |