| /* |
| * |
| * i2c tv tuner chip device driver |
| * core core, i.e. kernel interfaces, registering and so on |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/poll.h> |
| #include <linux/i2c.h> |
| #include <linux/types.h> |
| #include <linux/init.h> |
| #include <linux/videodev.h> |
| #include <media/tuner.h> |
| #include <media/tuner-types.h> |
| #include <media/v4l2-common.h> |
| #include <media/v4l2-i2c-drv-legacy.h> |
| #include "tuner-driver.h" |
| #include "mt20xx.h" |
| #include "tda8290.h" |
| #include "tea5761.h" |
| #include "tea5767.h" |
| #include "tuner-xc2028.h" |
| #include "tuner-simple.h" |
| #include "tda9887.h" |
| |
| #define UNSET (-1U) |
| |
| #define PREFIX t->i2c->driver->driver.name |
| |
| /* standard i2c insmod options */ |
| static unsigned short normal_i2c[] = { |
| #if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE)) |
| 0x10, |
| #endif |
| 0x42, 0x43, 0x4a, 0x4b, /* tda8290 */ |
| 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, |
| 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, |
| I2C_CLIENT_END |
| }; |
| |
| I2C_CLIENT_INSMOD; |
| |
| /* insmod options used at init time => read/only */ |
| static unsigned int addr = 0; |
| static unsigned int no_autodetect = 0; |
| static unsigned int show_i2c = 0; |
| |
| /* insmod options used at runtime => read/write */ |
| static int tuner_debug; |
| |
| #define tuner_warn(fmt, arg...) do { \ |
| printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \ |
| i2c_adapter_id(t->i2c->adapter), \ |
| t->i2c->addr, ##arg); \ |
| } while (0) |
| |
| #define tuner_info(fmt, arg...) do { \ |
| printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \ |
| i2c_adapter_id(t->i2c->adapter), \ |
| t->i2c->addr, ##arg); \ |
| } while (0) |
| |
| #define tuner_err(fmt, arg...) do { \ |
| printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \ |
| i2c_adapter_id(t->i2c->adapter), \ |
| t->i2c->addr, ##arg); \ |
| } while (0) |
| |
| #define tuner_dbg(fmt, arg...) do { \ |
| if (tuner_debug) \ |
| printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \ |
| i2c_adapter_id(t->i2c->adapter), \ |
| t->i2c->addr, ##arg); \ |
| } while (0) |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| static unsigned int tv_range[2] = { 44, 958 }; |
| static unsigned int radio_range[2] = { 65, 108 }; |
| |
| static char pal[] = "--"; |
| static char secam[] = "--"; |
| static char ntsc[] = "-"; |
| |
| |
| module_param(addr, int, 0444); |
| module_param(no_autodetect, int, 0444); |
| module_param(show_i2c, int, 0444); |
| module_param_named(debug,tuner_debug, int, 0644); |
| module_param_string(pal, pal, sizeof(pal), 0644); |
| module_param_string(secam, secam, sizeof(secam), 0644); |
| module_param_string(ntsc, ntsc, sizeof(ntsc), 0644); |
| module_param_array(tv_range, int, NULL, 0644); |
| module_param_array(radio_range, int, NULL, 0644); |
| |
| MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners"); |
| MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); |
| MODULE_LICENSE("GPL"); |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void fe_set_params(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; |
| struct tuner *t = fe->analog_demod_priv; |
| |
| if (NULL == fe_tuner_ops->set_analog_params) { |
| tuner_warn("Tuner frontend module has no way to set freq\n"); |
| return; |
| } |
| fe_tuner_ops->set_analog_params(fe, params); |
| } |
| |
| static void fe_release(struct dvb_frontend *fe) |
| { |
| if (fe->ops.tuner_ops.release) |
| fe->ops.tuner_ops.release(fe); |
| |
| fe->ops.analog_demod_ops = NULL; |
| |
| /* DO NOT kfree(fe->analog_demod_priv) |
| * |
| * If we are in this function, analog_demod_priv contains a pointer |
| * to struct tuner *t. This will be kfree'd in tuner_detach(). |
| * |
| * Otherwise, fe->ops.analog_demod_ops->release will |
| * handle the cleanup for analog demodulator modules. |
| */ |
| fe->analog_demod_priv = NULL; |
| } |
| |
| static void fe_standby(struct dvb_frontend *fe) |
| { |
| struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops; |
| |
| if (fe_tuner_ops->sleep) |
| fe_tuner_ops->sleep(fe); |
| } |
| |
| static int fe_has_signal(struct dvb_frontend *fe) |
| { |
| u16 strength = 0; |
| |
| if (fe->ops.tuner_ops.get_rf_strength) |
| fe->ops.tuner_ops.get_rf_strength(fe, &strength); |
| |
| return strength; |
| } |
| |
| static void tuner_status(struct dvb_frontend *fe); |
| |
| static struct analog_tuner_ops tuner_core_ops = { |
| .set_params = fe_set_params, |
| .standby = fe_standby, |
| .release = fe_release, |
| .has_signal = fe_has_signal, |
| .tuner_status = tuner_status |
| }; |
| |
| /* Set tuner frequency, freq in Units of 62.5kHz = 1/16MHz */ |
| static void set_tv_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; |
| |
| struct analog_parameters params = { |
| .mode = t->mode, |
| .audmode = t->audmode, |
| .std = t->std |
| }; |
| |
| if (t->type == UNSET) { |
| tuner_warn ("tuner type not set\n"); |
| return; |
| } |
| if ((NULL == ops) || (NULL == ops->set_params)) { |
| tuner_warn ("Tuner has no way to set tv freq\n"); |
| return; |
| } |
| if (freq < tv_range[0] * 16 || freq > tv_range[1] * 16) { |
| tuner_dbg ("TV freq (%d.%02d) out of range (%d-%d)\n", |
| freq / 16, freq % 16 * 100 / 16, tv_range[0], |
| tv_range[1]); |
| /* V4L2 spec: if the freq is not possible then the closest |
| possible value should be selected */ |
| if (freq < tv_range[0] * 16) |
| freq = tv_range[0] * 16; |
| else |
| freq = tv_range[1] * 16; |
| } |
| params.frequency = freq; |
| |
| ops->set_params(&t->fe, ¶ms); |
| } |
| |
| static void set_radio_freq(struct i2c_client *c, unsigned int freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; |
| |
| struct analog_parameters params = { |
| .mode = t->mode, |
| .audmode = t->audmode, |
| .std = t->std |
| }; |
| |
| if (t->type == UNSET) { |
| tuner_warn ("tuner type not set\n"); |
| return; |
| } |
| if ((NULL == ops) || (NULL == ops->set_params)) { |
| tuner_warn ("tuner has no way to set radio frequency\n"); |
| return; |
| } |
| if (freq < radio_range[0] * 16000 || freq > radio_range[1] * 16000) { |
| tuner_dbg ("radio freq (%d.%02d) out of range (%d-%d)\n", |
| freq / 16000, freq % 16000 * 100 / 16000, |
| radio_range[0], radio_range[1]); |
| /* V4L2 spec: if the freq is not possible then the closest |
| possible value should be selected */ |
| if (freq < radio_range[0] * 16000) |
| freq = radio_range[0] * 16000; |
| else |
| freq = radio_range[1] * 16000; |
| } |
| params.frequency = freq; |
| |
| ops->set_params(&t->fe, ¶ms); |
| } |
| |
| static void set_freq(struct i2c_client *c, unsigned long freq) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| switch (t->mode) { |
| case V4L2_TUNER_RADIO: |
| tuner_dbg("radio freq set to %lu.%02lu\n", |
| freq / 16000, freq % 16000 * 100 / 16000); |
| set_radio_freq(c, freq); |
| t->radio_freq = freq; |
| break; |
| case V4L2_TUNER_ANALOG_TV: |
| case V4L2_TUNER_DIGITAL_TV: |
| tuner_dbg("tv freq set to %lu.%02lu\n", |
| freq / 16, freq % 16 * 100 / 16); |
| set_tv_freq(c, freq); |
| t->tv_freq = freq; |
| break; |
| default: |
| tuner_dbg("freq set: unknown mode: 0x%04x!\n",t->mode); |
| } |
| } |
| |
| static void tuner_i2c_address_check(struct tuner *t) |
| { |
| if ((t->type == UNSET || t->type == TUNER_ABSENT) || |
| ((t->i2c->addr < 0x64) || (t->i2c->addr > 0x6f))) |
| return; |
| |
| tuner_warn("====================== WARNING! ======================\n"); |
| tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n"); |
| tuner_warn("will soon be dropped. This message indicates that your\n"); |
| tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n", |
| t->i2c->name, t->i2c->addr); |
| tuner_warn("To ensure continued support for your device, please\n"); |
| tuner_warn("send a copy of this message, along with full dmesg\n"); |
| tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n"); |
| tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n"); |
| tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n", |
| t->i2c->adapter->name, t->i2c->addr, t->type, |
| tuners[t->type].name); |
| tuner_warn("====================== WARNING! ======================\n"); |
| } |
| |
| static void attach_simple_tuner(struct tuner *t) |
| { |
| struct simple_tuner_config cfg = { |
| .type = t->type, |
| .tun = &tuners[t->type] |
| }; |
| simple_tuner_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg); |
| } |
| |
| static void attach_tda829x(struct tuner *t) |
| { |
| struct tda829x_config cfg = { |
| .lna_cfg = &t->config, |
| .tuner_callback = t->tuner_callback, |
| }; |
| tda829x_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg); |
| } |
| |
| static void set_type(struct i2c_client *c, unsigned int type, |
| unsigned int new_mode_mask, unsigned int new_config, |
| int (*tuner_callback) (void *dev, int command,int arg)) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; |
| struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; |
| unsigned char buffer[4]; |
| |
| if (type == UNSET || type == TUNER_ABSENT) { |
| tuner_dbg ("tuner 0x%02x: Tuner type absent\n",c->addr); |
| return; |
| } |
| |
| if (type >= tuner_count) { |
| tuner_warn ("tuner 0x%02x: Tuner count greater than %d\n",c->addr,tuner_count); |
| return; |
| } |
| |
| t->type = type; |
| t->config = new_config; |
| if (tuner_callback != NULL) { |
| tuner_dbg("defining GPIO callback\n"); |
| t->tuner_callback = tuner_callback; |
| } |
| |
| if (t->mode == T_UNINITIALIZED) { |
| tuner_dbg ("tuner 0x%02x: called during i2c_client register by adapter's attach_inform\n", c->addr); |
| |
| return; |
| } |
| |
| /* discard private data, in case set_type() was previously called */ |
| if (ops && ops->release) |
| ops->release(&t->fe); |
| |
| switch (t->type) { |
| case TUNER_MT2032: |
| microtune_attach(&t->fe, t->i2c->adapter, t->i2c->addr); |
| break; |
| case TUNER_PHILIPS_TDA8290: |
| { |
| attach_tda829x(t); |
| break; |
| } |
| case TUNER_TEA5767: |
| if (tea5767_attach(&t->fe, t->i2c->adapter, t->i2c->addr) == NULL) { |
| t->type = TUNER_ABSENT; |
| t->mode_mask = T_UNINITIALIZED; |
| return; |
| } |
| t->mode_mask = T_RADIO; |
| break; |
| case TUNER_TEA5761: |
| if (tea5761_attach(&t->fe, t->i2c->adapter, t->i2c->addr) == NULL) { |
| t->type = TUNER_ABSENT; |
| t->mode_mask = T_UNINITIALIZED; |
| return; |
| } |
| t->mode_mask = T_RADIO; |
| break; |
| case TUNER_PHILIPS_FMD1216ME_MK3: |
| buffer[0] = 0x0b; |
| buffer[1] = 0xdc; |
| buffer[2] = 0x9c; |
| buffer[3] = 0x60; |
| i2c_master_send(c, buffer, 4); |
| mdelay(1); |
| buffer[2] = 0x86; |
| buffer[3] = 0x54; |
| i2c_master_send(c, buffer, 4); |
| attach_simple_tuner(t); |
| break; |
| case TUNER_PHILIPS_TD1316: |
| buffer[0] = 0x0b; |
| buffer[1] = 0xdc; |
| buffer[2] = 0x86; |
| buffer[3] = 0xa4; |
| i2c_master_send(c,buffer,4); |
| attach_simple_tuner(t); |
| break; |
| case TUNER_XC2028: |
| { |
| struct xc2028_config cfg = { |
| .i2c_adap = t->i2c->adapter, |
| .i2c_addr = t->i2c->addr, |
| .video_dev = c->adapter->algo_data, |
| .callback = t->tuner_callback, |
| }; |
| if (!xc2028_attach(&t->fe, &cfg)) { |
| t->type = TUNER_ABSENT; |
| t->mode_mask = T_UNINITIALIZED; |
| return; |
| } |
| break; |
| } |
| case TUNER_TDA9887: |
| tda9887_attach(t); |
| break; |
| default: |
| attach_simple_tuner(t); |
| break; |
| } |
| |
| ops = t->fe.ops.analog_demod_ops; |
| |
| if (((NULL == ops) || (NULL == ops->set_params)) && |
| (fe_tuner_ops->set_analog_params)) { |
| strlcpy(t->i2c->name, fe_tuner_ops->info.name, |
| sizeof(t->i2c->name)); |
| |
| t->fe.ops.analog_demod_ops = &tuner_core_ops; |
| t->fe.analog_demod_priv = t; |
| } else { |
| strlcpy(t->i2c->name, ops->info.name, |
| sizeof(t->i2c->name)); |
| } |
| |
| tuner_dbg("type set to %s\n", t->i2c->name); |
| |
| if (t->mode_mask == T_UNINITIALIZED) |
| t->mode_mask = new_mode_mask; |
| |
| set_freq(c, (V4L2_TUNER_RADIO == t->mode) ? t->radio_freq : t->tv_freq); |
| tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n", |
| c->adapter->name, c->driver->driver.name, c->addr << 1, type, |
| t->mode_mask); |
| tuner_i2c_address_check(t); |
| } |
| |
| /* |
| * This function apply tuner config to tuner specified |
| * by tun_setup structure. I addr is unset, then admin status |
| * and tun addr status is more precise then current status, |
| * it's applied. Otherwise status and type are applied only to |
| * tuner with exactly the same addr. |
| */ |
| |
| static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| tuner_dbg("set addr for type %i\n", t->type); |
| |
| if ( (t->type == UNSET && ((tun_setup->addr == ADDR_UNSET) && |
| (t->mode_mask & tun_setup->mode_mask))) || |
| (tun_setup->addr == c->addr)) { |
| set_type(c, tun_setup->type, tun_setup->mode_mask, |
| tun_setup->config, tun_setup->tuner_callback); |
| } |
| } |
| |
| static inline int check_mode(struct tuner *t, char *cmd) |
| { |
| if ((1 << t->mode & t->mode_mask) == 0) { |
| return EINVAL; |
| } |
| |
| switch (t->mode) { |
| case V4L2_TUNER_RADIO: |
| tuner_dbg("Cmd %s accepted for radio\n", cmd); |
| break; |
| case V4L2_TUNER_ANALOG_TV: |
| tuner_dbg("Cmd %s accepted for analog TV\n", cmd); |
| break; |
| case V4L2_TUNER_DIGITAL_TV: |
| tuner_dbg("Cmd %s accepted for digital TV\n", cmd); |
| break; |
| } |
| return 0; |
| } |
| |
| /* get more precise norm info from insmod option */ |
| static int tuner_fixup_std(struct tuner *t) |
| { |
| if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) { |
| switch (pal[0]) { |
| case '6': |
| tuner_dbg ("insmod fixup: PAL => PAL-60\n"); |
| t->std = V4L2_STD_PAL_60; |
| break; |
| case 'b': |
| case 'B': |
| case 'g': |
| case 'G': |
| tuner_dbg ("insmod fixup: PAL => PAL-BG\n"); |
| t->std = V4L2_STD_PAL_BG; |
| break; |
| case 'i': |
| case 'I': |
| tuner_dbg ("insmod fixup: PAL => PAL-I\n"); |
| t->std = V4L2_STD_PAL_I; |
| break; |
| case 'd': |
| case 'D': |
| case 'k': |
| case 'K': |
| tuner_dbg ("insmod fixup: PAL => PAL-DK\n"); |
| t->std = V4L2_STD_PAL_DK; |
| break; |
| case 'M': |
| case 'm': |
| tuner_dbg ("insmod fixup: PAL => PAL-M\n"); |
| t->std = V4L2_STD_PAL_M; |
| break; |
| case 'N': |
| case 'n': |
| if (pal[1] == 'c' || pal[1] == 'C') { |
| tuner_dbg("insmod fixup: PAL => PAL-Nc\n"); |
| t->std = V4L2_STD_PAL_Nc; |
| } else { |
| tuner_dbg ("insmod fixup: PAL => PAL-N\n"); |
| t->std = V4L2_STD_PAL_N; |
| } |
| break; |
| case '-': |
| /* default parameter, do nothing */ |
| break; |
| default: |
| tuner_warn ("pal= argument not recognised\n"); |
| break; |
| } |
| } |
| if ((t->std & V4L2_STD_SECAM) == V4L2_STD_SECAM) { |
| switch (secam[0]) { |
| case 'b': |
| case 'B': |
| case 'g': |
| case 'G': |
| case 'h': |
| case 'H': |
| tuner_dbg("insmod fixup: SECAM => SECAM-BGH\n"); |
| t->std = V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H; |
| break; |
| case 'd': |
| case 'D': |
| case 'k': |
| case 'K': |
| tuner_dbg ("insmod fixup: SECAM => SECAM-DK\n"); |
| t->std = V4L2_STD_SECAM_DK; |
| break; |
| case 'l': |
| case 'L': |
| if ((secam[1]=='C')||(secam[1]=='c')) { |
| tuner_dbg ("insmod fixup: SECAM => SECAM-L'\n"); |
| t->std = V4L2_STD_SECAM_LC; |
| } else { |
| tuner_dbg ("insmod fixup: SECAM => SECAM-L\n"); |
| t->std = V4L2_STD_SECAM_L; |
| } |
| break; |
| case '-': |
| /* default parameter, do nothing */ |
| break; |
| default: |
| tuner_warn ("secam= argument not recognised\n"); |
| break; |
| } |
| } |
| |
| if ((t->std & V4L2_STD_NTSC) == V4L2_STD_NTSC) { |
| switch (ntsc[0]) { |
| case 'm': |
| case 'M': |
| tuner_dbg("insmod fixup: NTSC => NTSC-M\n"); |
| t->std = V4L2_STD_NTSC_M; |
| break; |
| case 'j': |
| case 'J': |
| tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n"); |
| t->std = V4L2_STD_NTSC_M_JP; |
| break; |
| case 'k': |
| case 'K': |
| tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n"); |
| t->std = V4L2_STD_NTSC_M_KR; |
| break; |
| case '-': |
| /* default parameter, do nothing */ |
| break; |
| default: |
| tuner_info("ntsc= argument not recognised\n"); |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| static void tuner_status(struct dvb_frontend *fe) |
| { |
| struct tuner *t = fe->analog_demod_priv; |
| unsigned long freq, freq_fraction; |
| struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; |
| struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; |
| const char *p; |
| |
| switch (t->mode) { |
| case V4L2_TUNER_RADIO: p = "radio"; break; |
| case V4L2_TUNER_ANALOG_TV: p = "analog TV"; break; |
| case V4L2_TUNER_DIGITAL_TV: p = "digital TV"; break; |
| default: p = "undefined"; break; |
| } |
| if (t->mode == V4L2_TUNER_RADIO) { |
| freq = t->radio_freq / 16000; |
| freq_fraction = (t->radio_freq % 16000) * 100 / 16000; |
| } else { |
| freq = t->tv_freq / 16; |
| freq_fraction = (t->tv_freq % 16) * 100 / 16; |
| } |
| tuner_info("Tuner mode: %s\n", p); |
| tuner_info("Frequency: %lu.%02lu MHz\n", freq, freq_fraction); |
| tuner_info("Standard: 0x%08lx\n", (unsigned long)t->std); |
| if (t->mode != V4L2_TUNER_RADIO) |
| return; |
| if (fe_tuner_ops->get_status) { |
| u32 tuner_status; |
| |
| fe_tuner_ops->get_status(&t->fe, &tuner_status); |
| if (tuner_status & TUNER_STATUS_LOCKED) |
| tuner_info("Tuner is locked.\n"); |
| if (tuner_status & TUNER_STATUS_STEREO) |
| tuner_info("Stereo: yes\n"); |
| } |
| if (ops) { |
| if (ops->has_signal) |
| tuner_info("Signal strength: %d\n", |
| ops->has_signal(fe)); |
| if (ops->is_stereo) |
| tuner_info("Stereo: %s\n", |
| ops->is_stereo(fe) ? "yes" : "no"); |
| } |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| /* |
| * Switch tuner to other mode. If tuner support both tv and radio, |
| * set another frequency to some value (This is needed for some pal |
| * tuners to avoid locking). Otherwise, just put second tuner in |
| * standby mode. |
| */ |
| |
| static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, char *cmd) |
| { |
| struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; |
| |
| if (mode == t->mode) |
| return 0; |
| |
| t->mode = mode; |
| |
| if (check_mode(t, cmd) == EINVAL) { |
| t->mode = T_STANDBY; |
| if (ops && ops->standby) |
| ops->standby(&t->fe); |
| return EINVAL; |
| } |
| return 0; |
| } |
| |
| #define switch_v4l2() if (!t->using_v4l2) \ |
| tuner_dbg("switching to v4l2\n"); \ |
| t->using_v4l2 = 1; |
| |
| static inline int check_v4l2(struct tuner *t) |
| { |
| /* bttv still uses both v4l1 and v4l2 calls to the tuner (v4l2 for |
| TV, v4l1 for radio), until that is fixed this code is disabled. |
| Otherwise the radio (v4l1) wouldn't tune after using the TV (v4l2) |
| first. */ |
| return 0; |
| } |
| |
| static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) |
| { |
| struct tuner *t = i2c_get_clientdata(client); |
| struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; |
| struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; |
| |
| if (tuner_debug>1) |
| v4l_i2c_print_ioctl(client,cmd); |
| |
| switch (cmd) { |
| /* --- configuration --- */ |
| case TUNER_SET_TYPE_ADDR: |
| tuner_dbg ("Calling set_type_addr for type=%d, addr=0x%02x, mode=0x%02x, config=0x%02x\n", |
| ((struct tuner_setup *)arg)->type, |
| ((struct tuner_setup *)arg)->addr, |
| ((struct tuner_setup *)arg)->mode_mask, |
| ((struct tuner_setup *)arg)->config); |
| |
| set_addr(client, (struct tuner_setup *)arg); |
| break; |
| case AUDC_SET_RADIO: |
| if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO") |
| == EINVAL) |
| return 0; |
| if (t->radio_freq) |
| set_freq(client, t->radio_freq); |
| break; |
| case TUNER_SET_STANDBY: |
| if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL) |
| return 0; |
| t->mode = T_STANDBY; |
| if (ops && ops->standby) |
| ops->standby(&t->fe); |
| break; |
| #ifdef CONFIG_VIDEO_V4L1 |
| case VIDIOCSAUDIO: |
| if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) |
| return 0; |
| if (check_v4l2(t) == EINVAL) |
| return 0; |
| |
| /* Should be implemented, since bttv calls it */ |
| tuner_dbg("VIDIOCSAUDIO not implemented.\n"); |
| break; |
| case VIDIOCSCHAN: |
| { |
| static const v4l2_std_id map[] = { |
| [VIDEO_MODE_PAL] = V4L2_STD_PAL, |
| [VIDEO_MODE_NTSC] = V4L2_STD_NTSC_M, |
| [VIDEO_MODE_SECAM] = V4L2_STD_SECAM, |
| [4 /* bttv */ ] = V4L2_STD_PAL_M, |
| [5 /* bttv */ ] = V4L2_STD_PAL_N, |
| [6 /* bttv */ ] = V4L2_STD_NTSC_M_JP, |
| }; |
| struct video_channel *vc = arg; |
| |
| if (check_v4l2(t) == EINVAL) |
| return 0; |
| |
| if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL) |
| return 0; |
| |
| if (vc->norm < ARRAY_SIZE(map)) |
| t->std = map[vc->norm]; |
| tuner_fixup_std(t); |
| if (t->tv_freq) |
| set_tv_freq(client, t->tv_freq); |
| return 0; |
| } |
| case VIDIOCSFREQ: |
| { |
| unsigned long *v = arg; |
| |
| if (check_mode(t, "VIDIOCSFREQ") == EINVAL) |
| return 0; |
| if (check_v4l2(t) == EINVAL) |
| return 0; |
| |
| set_freq(client, *v); |
| return 0; |
| } |
| case VIDIOCGTUNER: |
| { |
| struct video_tuner *vt = arg; |
| |
| if (check_mode(t, "VIDIOCGTUNER") == EINVAL) |
| return 0; |
| if (check_v4l2(t) == EINVAL) |
| return 0; |
| |
| if (V4L2_TUNER_RADIO == t->mode) { |
| if (fe_tuner_ops->get_status) { |
| u32 tuner_status; |
| |
| fe_tuner_ops->get_status(&t->fe, &tuner_status); |
| if (tuner_status & TUNER_STATUS_STEREO) |
| vt->flags |= VIDEO_TUNER_STEREO_ON; |
| else |
| vt->flags &= ~VIDEO_TUNER_STEREO_ON; |
| } else { |
| if (ops && ops->is_stereo) { |
| if (ops->is_stereo(&t->fe)) |
| vt->flags |= |
| VIDEO_TUNER_STEREO_ON; |
| else |
| vt->flags &= |
| ~VIDEO_TUNER_STEREO_ON; |
| } |
| } |
| if (ops && ops->has_signal) |
| vt->signal = ops->has_signal(&t->fe); |
| |
| vt->flags |= VIDEO_TUNER_LOW; /* Allow freqs at 62.5 Hz */ |
| |
| vt->rangelow = radio_range[0] * 16000; |
| vt->rangehigh = radio_range[1] * 16000; |
| |
| } else { |
| vt->rangelow = tv_range[0] * 16; |
| vt->rangehigh = tv_range[1] * 16; |
| } |
| |
| return 0; |
| } |
| case VIDIOCGAUDIO: |
| { |
| struct video_audio *va = arg; |
| |
| if (check_mode(t, "VIDIOCGAUDIO") == EINVAL) |
| return 0; |
| if (check_v4l2(t) == EINVAL) |
| return 0; |
| |
| if (V4L2_TUNER_RADIO == t->mode) { |
| if (fe_tuner_ops->get_status) { |
| u32 tuner_status; |
| |
| fe_tuner_ops->get_status(&t->fe, &tuner_status); |
| va->mode = (tuner_status & TUNER_STATUS_STEREO) |
| ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO; |
| } else if (ops && ops->is_stereo) |
| va->mode = ops->is_stereo(&t->fe) |
| ? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO; |
| } |
| return 0; |
| } |
| #endif |
| case TUNER_SET_CONFIG: |
| { |
| struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops; |
| struct v4l2_priv_tun_config *cfg = arg; |
| |
| if (t->type != cfg->tuner) |
| break; |
| |
| if (t->type == TUNER_TDA9887) { |
| t->tda9887_config = *(unsigned int *)cfg->priv; |
| set_freq(client, t->tv_freq); |
| break; |
| } |
| |
| if (NULL == fe_tuner_ops->set_config) { |
| tuner_warn("Tuner frontend module has no way to " |
| "set config\n"); |
| break; |
| } |
| fe_tuner_ops->set_config(&t->fe, cfg->priv); |
| |
| break; |
| } |
| /* --- v4l ioctls --- */ |
| /* take care: bttv does userspace copying, we'll get a |
| kernel pointer here... */ |
| case VIDIOC_S_STD: |
| { |
| v4l2_std_id *id = arg; |
| |
| if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD") |
| == EINVAL) |
| return 0; |
| |
| switch_v4l2(); |
| |
| t->std = *id; |
| tuner_fixup_std(t); |
| if (t->tv_freq) |
| set_freq(client, t->tv_freq); |
| break; |
| } |
| case VIDIOC_S_FREQUENCY: |
| { |
| struct v4l2_frequency *f = arg; |
| |
| if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") |
| == EINVAL) |
| return 0; |
| switch_v4l2(); |
| set_freq(client,f->frequency); |
| |
| break; |
| } |
| case VIDIOC_G_FREQUENCY: |
| { |
| struct v4l2_frequency *f = arg; |
| |
| if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL) |
| return 0; |
| switch_v4l2(); |
| f->type = t->mode; |
| if (fe_tuner_ops->get_frequency) { |
| u32 abs_freq; |
| |
| fe_tuner_ops->get_frequency(&t->fe, &abs_freq); |
| f->frequency = (V4L2_TUNER_RADIO == t->mode) ? |
| (abs_freq * 2 + 125/2) / 125 : |
| (abs_freq + 62500/2) / 62500; |
| break; |
| } |
| f->frequency = (V4L2_TUNER_RADIO == t->mode) ? |
| t->radio_freq : t->tv_freq; |
| break; |
| } |
| case VIDIOC_G_TUNER: |
| { |
| struct v4l2_tuner *tuner = arg; |
| |
| if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL) |
| return 0; |
| switch_v4l2(); |
| |
| tuner->type = t->mode; |
| if (ops && ops->get_afc) |
| tuner->afc = ops->get_afc(&t->fe); |
| if (t->mode == V4L2_TUNER_ANALOG_TV) |
| tuner->capability |= V4L2_TUNER_CAP_NORM; |
| if (t->mode != V4L2_TUNER_RADIO) { |
| tuner->rangelow = tv_range[0] * 16; |
| tuner->rangehigh = tv_range[1] * 16; |
| break; |
| } |
| |
| /* radio mode */ |
| tuner->rxsubchans = |
| V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; |
| if (fe_tuner_ops->get_status) { |
| u32 tuner_status; |
| |
| fe_tuner_ops->get_status(&t->fe, &tuner_status); |
| tuner->rxsubchans = |
| (tuner_status & TUNER_STATUS_STEREO) ? |
| V4L2_TUNER_SUB_STEREO : |
| V4L2_TUNER_SUB_MONO; |
| } else { |
| if (ops && ops->is_stereo) { |
| tuner->rxsubchans = |
| ops->is_stereo(&t->fe) ? |
| V4L2_TUNER_SUB_STEREO : |
| V4L2_TUNER_SUB_MONO; |
| } |
| } |
| if (ops && ops->has_signal) |
| tuner->signal = ops->has_signal(&t->fe); |
| tuner->capability |= |
| V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; |
| tuner->audmode = t->audmode; |
| tuner->rangelow = radio_range[0] * 16000; |
| tuner->rangehigh = radio_range[1] * 16000; |
| break; |
| } |
| case VIDIOC_S_TUNER: |
| { |
| struct v4l2_tuner *tuner = arg; |
| |
| if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL) |
| return 0; |
| |
| switch_v4l2(); |
| |
| /* do nothing unless we're a radio tuner */ |
| if (t->mode != V4L2_TUNER_RADIO) |
| break; |
| t->audmode = tuner->audmode; |
| set_radio_freq(client, t->radio_freq); |
| break; |
| } |
| case VIDIOC_LOG_STATUS: |
| if (ops && ops->tuner_status) |
| ops->tuner_status(&t->fe); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int tuner_suspend(struct i2c_client *c, pm_message_t state) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| tuner_dbg("suspend\n"); |
| /* FIXME: power down ??? */ |
| return 0; |
| } |
| |
| static int tuner_resume(struct i2c_client *c) |
| { |
| struct tuner *t = i2c_get_clientdata(c); |
| |
| tuner_dbg("resume\n"); |
| if (V4L2_TUNER_RADIO == t->mode) { |
| if (t->radio_freq) |
| set_freq(c, t->radio_freq); |
| } else { |
| if (t->tv_freq) |
| set_freq(c, t->tv_freq); |
| } |
| return 0; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| LIST_HEAD(tuner_list); |
| |
| /* Search for existing radio and/or TV tuners on the given I2C adapter. |
| Note that when this function is called from tuner_probe you can be |
| certain no other devices will be added/deleted at the same time, I2C |
| core protects against that. */ |
| static void tuner_lookup(struct i2c_adapter *adap, |
| struct tuner **radio, struct tuner **tv) |
| { |
| struct tuner *pos; |
| |
| *radio = NULL; |
| *tv = NULL; |
| |
| list_for_each_entry(pos, &tuner_list, list) { |
| int mode_mask; |
| |
| if (pos->i2c->adapter != adap || |
| pos->i2c->driver->id != I2C_DRIVERID_TUNER) |
| continue; |
| |
| mode_mask = pos->mode_mask & ~T_STANDBY; |
| if (*radio == NULL && mode_mask == T_RADIO) |
| *radio = pos; |
| /* Note: currently TDA9887 is the only demod-only |
| device. If other devices appear then we need to |
| make this test more general. */ |
| else if (*tv == NULL && pos->type != TUNER_TDA9887 && |
| (pos->mode_mask & (T_ANALOG_TV | T_DIGITAL_TV))) |
| *tv = pos; |
| } |
| } |
| |
| /* During client attach, set_type is called by adapter's attach_inform callback. |
| set_type must then be completed by tuner_probe. |
| */ |
| static int tuner_probe(struct i2c_client *client) |
| { |
| struct tuner *t; |
| struct tuner *radio; |
| struct tuner *tv; |
| |
| t = kzalloc(sizeof(struct tuner), GFP_KERNEL); |
| if (NULL == t) |
| return -ENOMEM; |
| t->i2c = client; |
| strlcpy(client->name, "(tuner unset)", sizeof(client->name)); |
| i2c_set_clientdata(client, t); |
| t->type = UNSET; |
| t->audmode = V4L2_TUNER_MODE_STEREO; |
| t->mode_mask = T_UNINITIALIZED; |
| |
| if (show_i2c) { |
| unsigned char buffer[16]; |
| int i, rc; |
| |
| memset(buffer, 0, sizeof(buffer)); |
| rc = i2c_master_recv(client, buffer, sizeof(buffer)); |
| tuner_info("I2C RECV = "); |
| for (i = 0; i < rc; i++) |
| printk(KERN_CONT "%02x ", buffer[i]); |
| printk("\n"); |
| } |
| /* HACK: This test was added to avoid tuner to probe tda9840 and |
| tea6415c on the MXB card */ |
| if (client->adapter->id == I2C_HW_SAA7146 && client->addr < 0x4a) { |
| kfree(t); |
| return -ENODEV; |
| } |
| |
| /* autodetection code based on the i2c addr */ |
| if (!no_autodetect) { |
| switch (client->addr) { |
| case 0x10: |
| if (tea5761_autodetection(t->i2c->adapter, t->i2c->addr) |
| != EINVAL) { |
| t->type = TUNER_TEA5761; |
| t->mode_mask = T_RADIO; |
| t->mode = T_STANDBY; |
| /* Sets freq to FM range */ |
| t->radio_freq = 87.5 * 16000; |
| tuner_lookup(t->i2c->adapter, &radio, &tv); |
| if (tv) |
| tv->mode_mask &= ~T_RADIO; |
| |
| goto register_client; |
| } |
| break; |
| case 0x42: |
| case 0x43: |
| case 0x4a: |
| case 0x4b: |
| /* If chip is not tda8290, don't register. |
| since it can be tda9887*/ |
| if (tda829x_probe(t->i2c->adapter, |
| t->i2c->addr) == 0) { |
| tuner_dbg("tda829x detected\n"); |
| } else { |
| /* Default is being tda9887 */ |
| t->type = TUNER_TDA9887; |
| t->mode_mask = T_RADIO | T_ANALOG_TV | |
| T_DIGITAL_TV; |
| t->mode = T_STANDBY; |
| goto register_client; |
| } |
| break; |
| case 0x60: |
| if (tea5767_autodetection(t->i2c->adapter, t->i2c->addr) |
| != EINVAL) { |
| t->type = TUNER_TEA5767; |
| t->mode_mask = T_RADIO; |
| t->mode = T_STANDBY; |
| /* Sets freq to FM range */ |
| t->radio_freq = 87.5 * 16000; |
| tuner_lookup(t->i2c->adapter, &radio, &tv); |
| if (tv) |
| tv->mode_mask &= ~T_RADIO; |
| |
| goto register_client; |
| } |
| break; |
| } |
| } |
| |
| /* Initializes only the first TV tuner on this adapter. Why only the |
| first? Because there are some devices (notably the ones with TI |
| tuners) that have more than one i2c address for the *same* device. |
| Experience shows that, except for just one case, the first |
| address is the right one. The exception is a Russian tuner |
| (ACORP_Y878F). So, the desired behavior is just to enable the |
| first found TV tuner. */ |
| tuner_lookup(t->i2c->adapter, &radio, &tv); |
| if (tv == NULL) { |
| t->mode_mask = T_ANALOG_TV | T_DIGITAL_TV; |
| if (radio == NULL) |
| t->mode_mask |= T_RADIO; |
| tuner_dbg("Setting mode_mask to 0x%02x\n", t->mode_mask); |
| t->tv_freq = 400 * 16; /* Sets freq to VHF High */ |
| t->radio_freq = 87.5 * 16000; /* Sets freq to FM range */ |
| } |
| |
| /* Should be just before return */ |
| register_client: |
| tuner_info("chip found @ 0x%x (%s)\n", client->addr << 1, |
| client->adapter->name); |
| |
| /* Sets a default mode */ |
| if (t->mode_mask & T_ANALOG_TV) { |
| t->mode = V4L2_TUNER_ANALOG_TV; |
| } else if (t->mode_mask & T_RADIO) { |
| t->mode = V4L2_TUNER_RADIO; |
| } else { |
| t->mode = V4L2_TUNER_DIGITAL_TV; |
| } |
| set_type(client, t->type, t->mode_mask, t->config, t->tuner_callback); |
| list_add_tail(&t->list, &tuner_list); |
| return 0; |
| } |
| |
| static int tuner_legacy_probe(struct i2c_adapter *adap) |
| { |
| if (0 != addr) { |
| normal_i2c[0] = addr; |
| normal_i2c[1] = I2C_CLIENT_END; |
| } |
| |
| if ((adap->class & I2C_CLASS_TV_ANALOG) == 0) |
| return 0; |
| |
| /* HACK: Ignore 0x6b and 0x6f on cx88 boards. |
| * FusionHDTV5 RT Gold has an ir receiver at 0x6b |
| * and an RTC at 0x6f which can get corrupted if probed. |
| */ |
| if ((adap->id == I2C_HW_B_CX2388x) || |
| (adap->id == I2C_HW_B_CX23885)) { |
| unsigned int i = 0; |
| |
| while (i < I2C_CLIENT_MAX_OPTS && ignore[i] != I2C_CLIENT_END) |
| i += 2; |
| if (i + 4 < I2C_CLIENT_MAX_OPTS) { |
| ignore[i+0] = adap->nr; |
| ignore[i+1] = 0x6b; |
| ignore[i+2] = adap->nr; |
| ignore[i+3] = 0x6f; |
| ignore[i+4] = I2C_CLIENT_END; |
| } else |
| printk(KERN_WARNING "tuner: " |
| "too many options specified " |
| "in i2c probe ignore list!\n"); |
| } |
| return 1; |
| } |
| |
| static int tuner_remove(struct i2c_client *client) |
| { |
| struct tuner *t = i2c_get_clientdata(client); |
| struct analog_tuner_ops *ops = t->fe.ops.analog_demod_ops; |
| |
| if (ops && ops->release) |
| ops->release(&t->fe); |
| |
| list_del(&t->list); |
| kfree(t); |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------- */ |
| |
| static struct v4l2_i2c_driver_data v4l2_i2c_data = { |
| .name = "tuner", |
| .driverid = I2C_DRIVERID_TUNER, |
| .command = tuner_command, |
| .probe = tuner_probe, |
| .remove = tuner_remove, |
| .suspend = tuner_suspend, |
| .resume = tuner_resume, |
| .legacy_probe = tuner_legacy_probe, |
| }; |
| |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |