sh: mach-edosk7705: Fix up edosk7705 so it all builds again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd53..cd54acb 100644
--- a/arch/sh/boards/mach-edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
@@ -3,4 +3,3 @@
#
obj-y := setup.o io.o
-
diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 7d153e5..5b9c57c 100644
--- a/arch/sh/boards/mach-edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
@@ -10,28 +10,24 @@
#include <linux/kernel.h>
#include <linux/types.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <mach/edosk7705.h>
#include <asm/addrspace.h>
#define SMC_IOADDR 0xA2000000
-#define maybebadio(name,port) \
- printk("bad PC-like io %s for port 0x%lx at 0x%08x\n", \
- #name, (port), (__u32) __builtin_return_address(0))
-
/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
+static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
{
- if (port >= 0x300 && port < 0x320) {
- /* SMC91C96 registers are 4 byte aligned rather than the
- * usual 2 byte!
- */
- return SMC_IOADDR + ( (port - 0x300) * 2);
- }
+ /*
+ * SMC91C96 registers are 4 byte aligned rather than the
+ * usual 2 byte!
+ */
+ if (port >= 0x300 && port < 0x320)
+ return SMC_IOADDR + ((port - 0x300) * 2);
- maybebadio(sh_edosk7705_isa_port2addr, port);
- return port;
+ maybebadio(port);
+ return port;
}
/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
@@ -42,53 +38,34 @@
*/
unsigned char sh_edosk7705_inb(unsigned long port)
{
- if (port >= 0x300 && port < 0x320 && port & 0x01) {
- return (volatile unsigned char)(generic_inw(port -1) >> 8);
- }
- return *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port);
-}
+ if (port >= 0x300 && port < 0x320 && port & 0x01)
+ return __raw_readw(port - 1) >> 8;
-unsigned int sh_edosk7705_inl(unsigned long port)
-{
- return *(volatile unsigned long *)port;
+ return __raw_readb(sh_edosk7705_isa_port2addr(port));
}
void sh_edosk7705_outb(unsigned char value, unsigned long port)
{
if (port >= 0x300 && port < 0x320 && port & 0x01) {
- generic_outw(((unsigned short)value << 8), port -1);
+ __raw_writew(((unsigned short)value << 8), port - 1);
return;
}
- *(volatile unsigned char *)sh_edosk7705_isa_port2addr(port) = value;
-}
-void sh_edosk7705_outl(unsigned int value, unsigned long port)
-{
- *(volatile unsigned long *)port = value;
+ __raw_writeb(value, sh_edosk7705_isa_port2addr(port));
}
void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
{
unsigned char *p = addr;
- while (count--) *p++ = sh_edosk7705_inb(port);
-}
-void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count)
-{
- unsigned long *p = (unsigned long*)addr;
while (count--)
- *p++ = *(volatile unsigned long *)port;
+ *p++ = sh_edosk7705_inb(port);
}
void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
{
- unsigned char *p = (unsigned char*)addr;
- while (count--) sh_edosk7705_outb(*p++, port);
-}
+ unsigned char *p = (unsigned char *)addr;
-void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count)
-{
- unsigned long *p = (unsigned long*)addr;
- while (count--) sh_edosk7705_outl(*p++, port);
+ while (count--)
+ sh_edosk7705_outb(*p++, port);
}
-
diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index ab3f47b..d59225e 100644
--- a/arch/sh/boards/mach-edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
@@ -9,6 +9,7 @@
* board by S. Dunn, 2003.
*/
#include <linux/init.h>
+#include <linux/irq.h>
#include <asm/machvec.h>
#include <mach/edosk7705.h>
@@ -26,18 +27,10 @@
.mv_nr_irqs = 80,
.mv_inb = sh_edosk7705_inb,
- .mv_inl = sh_edosk7705_inl,
.mv_outb = sh_edosk7705_outb,
- .mv_outl = sh_edosk7705_outl,
-
- .mv_inl_p = sh_edosk7705_inl,
- .mv_outl_p = sh_edosk7705_outl,
.mv_insb = sh_edosk7705_insb,
- .mv_insl = sh_edosk7705_insl,
.mv_outsb = sh_edosk7705_outsb,
- .mv_outsl = sh_edosk7705_outsl,
- .mv_isa_port2addr = sh_edosk7705_isa_port2addr,
.mv_init_irq = sh_edosk7705_init_irq,
};
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index eec0d22..64b1c16 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -14,8 +14,6 @@
#include <linux/time.h>
#include <asm/machtypes.h>
-struct device;
-
struct sh_machine_vector {
void (*mv_setup)(char **cmdline_p);
const char *mv_name;
diff --git a/arch/sh/include/mach-common/mach/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h
index 5bdc9d9..efc43b32 100644
--- a/arch/sh/include/mach-common/mach/edosk7705.h
+++ b/arch/sh/include/mach-common/mach/edosk7705.h
@@ -1,30 +1,7 @@
-/*
- * include/asm-sh/edosk7705.h
- *
- * Modified version of io_se.h for the EDOSK7705 specific functions.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * IO functions for an Hitachi EDOSK7705 development board
- */
+#ifndef __ASM_SH_EDOSK7705_H
+#define __ASM_SH_EDOSK7705_H
-#ifndef __ASM_SH_EDOSK7705_IO_H
-#define __ASM_SH_EDOSK7705_IO_H
-
+#define __IO_PREFIX sh_edosk7705
#include <asm/io_generic.h>
-extern unsigned char sh_edosk7705_inb(unsigned long port);
-extern unsigned int sh_edosk7705_inl(unsigned long port);
-
-extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
-extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
-
-extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
-extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
-
-#endif /* __ASM_SH_EDOSK7705_IO_H */
+#endif /* __ASM_SH_EDOSK7705_H */