Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6:
spi.h: missing kernel-doc notation, please fix
of: fix missing headers for of_address_to_resource() in MTD and SysACE drivers
of: Fix missing includes
ata: update for of_device to platform_device replacement
microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node
microblaze: Fix of/address: Merge all of the bus translation code
booting-without-of: Remove nonexistent chapters from TOC, fix numbering
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 568fa08..302db5d 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -49,40 +49,13 @@
f) MDIO on GPIOs
g) SPI busses
- VII - Marvell Discovery mv64[345]6x System Controller chips
- 1) The /system-controller node
- 2) Child nodes of /system-controller
- a) Marvell Discovery MDIO bus
- b) Marvell Discovery ethernet controller
- c) Marvell Discovery PHY nodes
- d) Marvell Discovery SDMA nodes
- e) Marvell Discovery BRG nodes
- f) Marvell Discovery CUNIT nodes
- g) Marvell Discovery MPSCROUTING nodes
- h) Marvell Discovery MPSCINTR nodes
- i) Marvell Discovery MPSC nodes
- j) Marvell Discovery Watch Dog Timer nodes
- k) Marvell Discovery I2C nodes
- l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
- m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
- n) Marvell Discovery GPP (General Purpose Pins) nodes
- o) Marvell Discovery PCI host bridge node
- p) Marvell Discovery CPU Error nodes
- q) Marvell Discovery SRAM Controller nodes
- r) Marvell Discovery PCI Error Handler nodes
- s) Marvell Discovery Memory Controller nodes
-
- VIII - Specifying interrupt information for devices
+ VII - Specifying interrupt information for devices
1) interrupts property
2) interrupt-parent property
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
- IX - Specifying GPIO information for devices
- 1) gpios property
- 2) gpio-controller nodes
-
- X - Specifying device power management information (sleep property)
+ VIII - Specifying device power management information (sleep property)
Appendix A - Sample SOC node for MPC8540
diff --git a/arch/microblaze/kernel/prom_parse.c b/arch/microblaze/kernel/prom_parse.c
index d33ba17..99d9b61 100644
--- a/arch/microblaze/kernel/prom_parse.c
+++ b/arch/microblaze/kernel/prom_parse.c
@@ -73,7 +73,7 @@
/* We can only get here if we hit a P2P bridge with no node,
* let's do standard swizzling and try again
*/
- lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec);
+ lspec = pci_swizzle_interrupt_pin(pdev, lspec);
pdev = ppdev;
}
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 23be25f..55ef532 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -27,10 +27,11 @@
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
@@ -1077,7 +1078,7 @@
struct dev_archdata *sd = &dev->dev.archdata;
/* Setup OF node pointer in archdata */
- sd->of_node = pci_device_to_OF_node(dev);
+ dev->dev.of_node = pci_device_to_OF_node(dev);
/* Fixup NUMA node as it may not be setup yet by the generic
* code and is needed by the DMA init
diff --git a/arch/microblaze/pci/xilinx_pci.c b/arch/microblaze/pci/xilinx_pci.c
index 7869a41..0687a42 100644
--- a/arch/microblaze/pci/xilinx_pci.c
+++ b/arch/microblaze/pci/xilinx_pci.c
@@ -16,6 +16,7 @@
#include <linux/ioport.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/pci.h>
#include <asm/io.h>
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index ea24c1e..2673a3d 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -1588,7 +1588,7 @@
},
};
-static int sata_dwc_probe(struct of_device *ofdev,
+static int sata_dwc_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct sata_dwc_device *hsdev;
@@ -1702,7 +1702,7 @@
return err;
}
-static int sata_dwc_remove(struct of_device *ofdev)
+static int sata_dwc_remove(struct platform_device *ofdev)
{
struct device *dev = &ofdev->dev;
struct ata_host *host = dev_get_drvdata(dev);
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 2982b3e..057413b 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -94,6 +94,7 @@
#include <linux/hdreg.h>
#include <linux/platform_device.h>
#if defined(CONFIG_OF)
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#endif
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index 0ed763c..b663d57 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -94,6 +94,7 @@
#ifdef CONFIG_OF
/* For open firmware. */
+#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#endif
diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
index 00af55d..fe63f6b 100644
--- a/drivers/mtd/maps/physmap_of.c
+++ b/drivers/mtd/maps/physmap_of.c
@@ -22,6 +22,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/concat.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c
index 659a695..2af8fd1 100644
--- a/drivers/serial/of_serial.c
+++ b/drivers/serial/of_serial.c
@@ -14,11 +14,10 @@
#include <linux/slab.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
+#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/nwpserial.h>
-#include <asm/prom.h>
-
struct of_serial_info {
int type;
int line;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index ae0a528..92e52a1 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -213,6 +213,9 @@
* @dma_alignment: SPI controller constraint on DMA buffers alignment.
* @mode_bits: flags understood by this controller driver
* @flags: other constraints relevant to this driver
+ * @bus_lock_spinlock: spinlock for SPI bus locking
+ * @bus_lock_mutex: mutex for SPI bus locking
+ * @bus_lock_flag: indicates that the SPI bus is locked for exclusive use
* @setup: updates the device mode and clocking records used by a
* device's SPI controller; protocol code may call this. This
* must fail if an unrecognized or unsupported mode is requested.