arch/arm/mach-msm/board-msm8960-display.c

/* Copyright (c) 2011, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
#include <asm/mach-types.h>
#include <mach/msm_bus_board.h>
#include <mach/board.h>
#include <mach/gpio.h>
#include <mach/gpiomux.h>
#include "devices.h"
#include "board-msm8960.h"

#ifdef CONFIG_FB_MSM_TRIPLE_BUFFER
#define MSM_FB_PRIM_BUF_SIZE (1376 * 768 * 4 * 3) /* 4 bpp x 3 pages */
#else
#define MSM_FB_PRIM_BUF_SIZE (1376 * 768 * 4 * 2) /* 4 bpp x 2 pages */
#endif

#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
#define MSM_FB_EXT_BUF_SIZE	(1920 * 1088 * 2 * 1) /* 2 bpp x 1 page */
#elif defined(CONFIG_FB_MSM_TVOUT)
#define MSM_FB_EXT_BUF_SIZE (720 * 576 * 2 * 2) /* 2 bpp x 2 pages */
#else
#define MSM_FB_EXT_BUF_SIZE	0
#endif

#ifdef CONFIG_FB_MSM_OVERLAY_WRITEBACK
/* width x height x 3 bpp x 2 frame buffer */
#define MSM_FB_WRITEBACK_SIZE (1376 * 768 * 3 * 2)
#define MSM_FB_WRITEBACK_OFFSET  \
		(MSM_FB_PRIM_BUF_SIZE + MSM_FB_EXT_BUF_SIZE)
#else
#define MSM_FB_WRITEBACK_SIZE   0
#define MSM_FB_WRITEBACK_OFFSET 0
#endif

#ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY
/* 4 bpp x 2 page HDMI case */
#define MSM_FB_SIZE roundup((1920 * 1088 * 4 * 2), 4096)
#else
/* Note: must be multiple of 4096 */
#define MSM_FB_SIZE roundup(MSM_FB_PRIM_BUF_SIZE + MSM_FB_EXT_BUF_SIZE + \
				MSM_FB_WRITEBACK_SIZE, 4096)
#endif

#define MDP_VSYNC_GPIO 0

#define PANEL_NAME_MAX_LEN	30
#define MIPI_CMD_NOVATEK_QHD_PANEL_NAME	"mipi_cmd_novatek_qhd"
#define MIPI_VIDEO_NOVATEK_QHD_PANEL_NAME	"mipi_video_novatek_qhd"
#define MIPI_VIDEO_TOSHIBA_WSVGA_PANEL_NAME	"mipi_video_toshiba_wsvga"
#define MIPI_VIDEO_CHIMEI_WXGA_PANEL_NAME	"mipi_video_chimei_wxga"
#define MIPI_VIDEO_SIMULATOR_VGA_PANEL_NAME	"mipi_video_simulator_vga"
#define MIPI_CMD_RENESAS_FWVGA_PANEL_NAME	"mipi_cmd_renesas_fwvga"
#define HDMI_PANEL_NAME	"hdmi_msm"
#define TVOUT_PANEL_NAME	"tvout_msm"

static int writeback_offset(void)
{
	return MSM_FB_WRITEBACK_OFFSET;
}

static struct resource msm_fb_resources[] = {
	{
		.flags = IORESOURCE_DMA,
	}
};

static int msm_fb_detect_panel(const char *name)
{
	if (machine_is_msm8960_liquid()) {
		if (!strncmp(name, MIPI_VIDEO_CHIMEI_WXGA_PANEL_NAME,
				strnlen(MIPI_VIDEO_CHIMEI_WXGA_PANEL_NAME,
					PANEL_NAME_MAX_LEN)))
			return 0;
	} else {
		if (!strncmp(name, MIPI_VIDEO_TOSHIBA_WSVGA_PANEL_NAME,
				strnlen(MIPI_VIDEO_TOSHIBA_WSVGA_PANEL_NAME,
					PANEL_NAME_MAX_LEN)))
			return 0;

#ifndef CONFIG_FB_MSM_MIPI_PANEL_DETECT
		if (!strncmp(name, MIPI_VIDEO_NOVATEK_QHD_PANEL_NAME,
				strnlen(MIPI_VIDEO_NOVATEK_QHD_PANEL_NAME,
					PANEL_NAME_MAX_LEN)))
			return 0;

		if (!strncmp(name, MIPI_CMD_NOVATEK_QHD_PANEL_NAME,
				strnlen(MIPI_CMD_NOVATEK_QHD_PANEL_NAME,
					PANEL_NAME_MAX_LEN)))
			return 0;

		if (!strncmp(name, MIPI_VIDEO_SIMULATOR_VGA_PANEL_NAME,
				strnlen(MIPI_VIDEO_SIMULATOR_VGA_PANEL_NAME,
					PANEL_NAME_MAX_LEN)))
			return 0;

		if (!strncmp(name, MIPI_CMD_RENESAS_FWVGA_PANEL_NAME,
				strnlen(MIPI_CMD_RENESAS_FWVGA_PANEL_NAME,
					PANEL_NAME_MAX_LEN)))
			return 0;
#endif
	}

	if (!strncmp(name, HDMI_PANEL_NAME,
			strnlen(HDMI_PANEL_NAME,
				PANEL_NAME_MAX_LEN)))
		return 0;

	if (!strncmp(name, TVOUT_PANEL_NAME,
			strnlen(TVOUT_PANEL_NAME,
				PANEL_NAME_MAX_LEN)))
		return 0;

	pr_warning("%s: not supported '%s'", __func__, name);
	return -ENODEV;
}

static struct msm_fb_platform_data msm_fb_pdata = {
	.detect_client = msm_fb_detect_panel,
};

static struct platform_device msm_fb_device = {
	.name   = "msm_fb",
	.id     = 0,
	.num_resources     = ARRAY_SIZE(msm_fb_resources),
	.resource          = msm_fb_resources,
	.dev.platform_data = &msm_fb_pdata,
};

static bool dsi_power_on;

/**
 * LiQUID panel on/off
 *
 * @param on
 *
 * @return int
 */
static int mipi_dsi_liquid_panel_power(int on)
{
	static struct regulator *reg_l2, *reg_ext_3p3v;
	static int gpio21, gpio24, gpio43;
	int rc;

	pr_info("%s: on=%d\n", __func__, on);

	gpio21 = PM8921_GPIO_PM_TO_SYS(21); /* disp power enable_n */
	gpio43 = PM8921_GPIO_PM_TO_SYS(43); /* Displays Enable (rst_n)*/
	gpio24 = PM8921_GPIO_PM_TO_SYS(24); /* Backlight PWM */

	if (!dsi_power_on) {

		reg_l2 = regulator_get(&msm_mipi_dsi1_device.dev,
				"dsi_vdda");
		if (IS_ERR(reg_l2)) {
			pr_err("could not get 8921_l2, rc = %ld\n",
				PTR_ERR(reg_l2));
			return -ENODEV;
		}

		rc = regulator_set_voltage(reg_l2, 1200000, 1200000);
		if (rc) {
			pr_err("set_voltage l2 failed, rc=%d\n", rc);
			return -EINVAL;
		}

		reg_ext_3p3v = regulator_get(&msm_mipi_dsi1_device.dev,
			"vdd_lvds_3p3v");
		if (IS_ERR(reg_ext_3p3v)) {
			pr_err("could not get reg_ext_3p3v, rc = %ld\n",
			       PTR_ERR(reg_ext_3p3v));
		    return -ENODEV;
		}

		rc = gpio_request(gpio21, "disp_pwr_en_n");
		if (rc) {
			pr_err("request gpio 21 failed, rc=%d\n", rc);
			return -ENODEV;
		}

		rc = gpio_request(gpio43, "disp_rst_n");
		if (rc) {
			pr_err("request gpio 43 failed, rc=%d\n", rc);
			return -ENODEV;
		}

		rc = gpio_request(gpio24, "disp_backlight_pwm");
		if (rc) {
			pr_err("request gpio 24 failed, rc=%d\n", rc);
			return -ENODEV;
		}

		dsi_power_on = true;
	}

	if (on) {
		rc = regulator_set_optimum_mode(reg_l2, 100000);
		if (rc < 0) {
			pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_enable(reg_l2);
		if (rc) {
			pr_err("enable l2 failed, rc=%d\n", rc);
			return -ENODEV;
		}

		rc = regulator_enable(reg_ext_3p3v);
		if (rc) {
			pr_err("enable reg_ext_3p3v failed, rc=%d\n", rc);
			return -ENODEV;
		}

		/* set reset pin before power enable */
		gpio_set_value_cansleep(gpio43, 0); /* disp disable (resx=0) */

		gpio_set_value_cansleep(gpio21, 0); /* disp power enable_n */
		msleep(20);
		gpio_set_value_cansleep(gpio43, 1); /* disp enable */
		msleep(20);
		gpio_set_value_cansleep(gpio43, 0); /* disp enable */
		msleep(20);
		gpio_set_value_cansleep(gpio43, 1); /* disp enable */
		msleep(20);
	} else {
		gpio_set_value_cansleep(gpio43, 0);
		gpio_set_value_cansleep(gpio21, 1);

		rc = regulator_disable(reg_l2);
		if (rc) {
			pr_err("disable reg_l2 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_disable(reg_ext_3p3v);
		if (rc) {
			pr_err("disable reg_ext_3p3v failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_set_optimum_mode(reg_l2, 100);
		if (rc < 0) {
			pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
			return -EINVAL;
		}
	}

	return 0;
}

static int mipi_dsi_cdp_panel_power(int on)
{
	static struct regulator *reg_l8, *reg_l23, *reg_l2;
	static int gpio43;
	int rc;

	pr_info("%s: state : %d\n", __func__, on);

	if (!dsi_power_on) {

		reg_l8 = regulator_get(&msm_mipi_dsi1_device.dev,
				"dsi_vdc");
		if (IS_ERR(reg_l8)) {
			pr_err("could not get 8921_l8, rc = %ld\n",
				PTR_ERR(reg_l8));
			return -ENODEV;
		}
		reg_l23 = regulator_get(&msm_mipi_dsi1_device.dev,
				"dsi_vddio");
		if (IS_ERR(reg_l23)) {
			pr_err("could not get 8921_l23, rc = %ld\n",
				PTR_ERR(reg_l23));
			return -ENODEV;
		}
		reg_l2 = regulator_get(&msm_mipi_dsi1_device.dev,
				"dsi_vdda");
		if (IS_ERR(reg_l2)) {
			pr_err("could not get 8921_l2, rc = %ld\n",
				PTR_ERR(reg_l2));
			return -ENODEV;
		}
		rc = regulator_set_voltage(reg_l8, 2800000, 3000000);
		if (rc) {
			pr_err("set_voltage l8 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_set_voltage(reg_l23, 1800000, 1800000);
		if (rc) {
			pr_err("set_voltage l23 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_set_voltage(reg_l2, 1200000, 1200000);
		if (rc) {
			pr_err("set_voltage l2 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		gpio43 = PM8921_GPIO_PM_TO_SYS(43);
		rc = gpio_request(gpio43, "disp_rst_n");
		if (rc) {
			pr_err("request gpio 43 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		dsi_power_on = true;
	}
	if (on) {
		rc = regulator_set_optimum_mode(reg_l8, 100000);
		if (rc < 0) {
			pr_err("set_optimum_mode l8 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_set_optimum_mode(reg_l23, 100000);
		if (rc < 0) {
			pr_err("set_optimum_mode l23 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_set_optimum_mode(reg_l2, 100000);
		if (rc < 0) {
			pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_enable(reg_l8);
		if (rc) {
			pr_err("enable l8 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_enable(reg_l23);
		if (rc) {
			pr_err("enable l8 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_enable(reg_l2);
		if (rc) {
			pr_err("enable l2 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		gpio_set_value_cansleep(gpio43, 1);
	} else {
		rc = regulator_disable(reg_l2);
		if (rc) {
			pr_err("disable reg_l2 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_disable(reg_l8);
		if (rc) {
			pr_err("disable reg_l8 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_disable(reg_l23);
		if (rc) {
			pr_err("disable reg_l23 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_set_optimum_mode(reg_l8, 100);
		if (rc < 0) {
			pr_err("set_optimum_mode l8 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_set_optimum_mode(reg_l23, 100);
		if (rc < 0) {
			pr_err("set_optimum_mode l23 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_set_optimum_mode(reg_l2, 100);
		if (rc < 0) {
			pr_err("set_optimum_mode l2 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		gpio_set_value_cansleep(gpio43, 0);
	}
	return 0;
}

static int mipi_dsi_panel_power(int on)
{
	int ret;

	pr_info("%s: on=%d\n", __func__, on);

	if (machine_is_msm8960_liquid())
		ret = mipi_dsi_liquid_panel_power(on);
	else
		ret = mipi_dsi_cdp_panel_power(on);

	return ret;
}

static struct mipi_dsi_platform_data mipi_dsi_pdata = {
	.vsync_gpio = MDP_VSYNC_GPIO,
	.dsi_power_save = mipi_dsi_panel_power,
};

#ifdef CONFIG_MSM_BUS_SCALING

static struct msm_bus_vectors mdp_init_vectors[] = {
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = 0,
	},
};

#ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY
static struct msm_bus_vectors hdmi_as_primary_vectors[] = {
	/* If HDMI is used as primary */
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 2000000000,
		.ib = 2000000000,
	},
};
static struct msm_bus_paths mdp_bus_scale_usecases[] = {
	{
		ARRAY_SIZE(mdp_init_vectors),
		mdp_init_vectors,
	},
	{
		ARRAY_SIZE(hdmi_as_primary_vectors),
		hdmi_as_primary_vectors,
	},
	{
		ARRAY_SIZE(hdmi_as_primary_vectors),
		hdmi_as_primary_vectors,
	},
	{
		ARRAY_SIZE(hdmi_as_primary_vectors),
		hdmi_as_primary_vectors,
	},
	{
		ARRAY_SIZE(hdmi_as_primary_vectors),
		hdmi_as_primary_vectors,
	},
	{
		ARRAY_SIZE(hdmi_as_primary_vectors),
		hdmi_as_primary_vectors,
	},
};
#else
static struct msm_bus_vectors mdp_ui_vectors[] = {
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 216000000 * 2,
		.ib = 270000000 * 2,
	},
};

static struct msm_bus_vectors mdp_vga_vectors[] = {
	/* VGA and less video */
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 216000000 * 2,
		.ib = 270000000 * 2,
	},
};

static struct msm_bus_vectors mdp_720p_vectors[] = {
	/* 720p and less video */
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 230400000 * 2,
		.ib = 288000000 * 2,
	},
};

static struct msm_bus_vectors mdp_1080p_vectors[] = {
	/* 1080p and less video */
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 334080000 * 2,
		.ib = 417600000 * 2,
	},
};

static struct msm_bus_paths mdp_bus_scale_usecases[] = {
	{
		ARRAY_SIZE(mdp_init_vectors),
		mdp_init_vectors,
	},
	{
		ARRAY_SIZE(mdp_ui_vectors),
		mdp_ui_vectors,
	},
	{
		ARRAY_SIZE(mdp_ui_vectors),
		mdp_ui_vectors,
	},
	{
		ARRAY_SIZE(mdp_vga_vectors),
		mdp_vga_vectors,
	},
	{
		ARRAY_SIZE(mdp_720p_vectors),
		mdp_720p_vectors,
	},
	{
		ARRAY_SIZE(mdp_1080p_vectors),
		mdp_1080p_vectors,
	},
};
#endif

static struct msm_bus_scale_pdata mdp_bus_scale_pdata = {
	mdp_bus_scale_usecases,
	ARRAY_SIZE(mdp_bus_scale_usecases),
	.name = "mdp",
};

#endif

#ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY
static int mdp_core_clk_rate_table[] = {
	200000000,
	200000000,
	200000000,
	200000000,
};
#else
static int mdp_core_clk_rate_table[] = {
	85330000,
	85330000,
	160000000,
	200000000,
};
#endif

static struct msm_panel_common_pdata mdp_pdata = {
	.gpio = MDP_VSYNC_GPIO,
#ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY
	.mdp_core_clk_rate = 200000000,
#else
	.mdp_core_clk_rate = 85330000,
#endif
	.mdp_core_clk_table = mdp_core_clk_rate_table,
	.num_mdp_clk = ARRAY_SIZE(mdp_core_clk_rate_table),
#ifdef CONFIG_MSM_BUS_SCALING
	.mdp_bus_scale_table = &mdp_bus_scale_pdata,
#endif
	.mdp_rev = MDP_REV_42,
	.writeback_offset = writeback_offset,
};

static struct platform_device mipi_dsi_renesas_panel_device = {
	.name = "mipi_renesas",
	.id = 0,
};

static struct platform_device mipi_dsi_simulator_panel_device = {
	.name = "mipi_simulator",
	.id = 0,
};

#define LPM_CHANNEL0 0
static int toshiba_gpio[] = {LPM_CHANNEL0};

static struct mipi_dsi_panel_platform_data toshiba_pdata = {
	.gpio = toshiba_gpio,
};

static struct platform_device mipi_dsi_toshiba_panel_device = {
	.name = "mipi_toshiba",
	.id = 0,
	.dev = {
		.platform_data = &toshiba_pdata,
	}
};

#define FPGA_3D_GPIO_CONFIG_ADDR	0xB5
static int dsi2lvds_gpio[2] = {
	0,/* Backlight PWM-ID=0 for PMIC-GPIO#24 */
	0x1F08 /* DSI2LVDS Bridge GPIO Output, mask=0x1f, out=0x08 */
	};

static struct msm_panel_common_pdata mipi_dsi2lvds_pdata = {
	.gpio_num = dsi2lvds_gpio,
};

static struct mipi_dsi_phy_ctrl dsi_novatek_cmd_mode_phy_db = {

/* DSI_BIT_CLK at 500MHz, 2 lane, RGB888 */
	{0x0F, 0x0a, 0x04, 0x00, 0x20},	/* regulator */
	/* timing   */
	{0xab, 0x8a, 0x18, 0x00, 0x92, 0x97, 0x1b, 0x8c,
	0x0c, 0x03, 0x04, 0xa0},
	{0x5f, 0x00, 0x00, 0x10},	/* phy ctrl */
	{0xff, 0x00, 0x06, 0x00},	/* strength */
	/* pll control */
	{0x40, 0xf9, 0x30, 0xda, 0x00, 0x40, 0x03, 0x62,
	0x40, 0x07, 0x03,
	0x00, 0x1a, 0x00, 0x00, 0x02, 0x00, 0x20, 0x00, 0x01},
};

static struct mipi_dsi_panel_platform_data novatek_pdata = {
	.fpga_3d_config_addr  = FPGA_3D_GPIO_CONFIG_ADDR,
	.fpga_ctrl_mode = FPGA_SPI_INTF,
	.phy_ctrl_settings = &dsi_novatek_cmd_mode_phy_db,
};

static struct platform_device mipi_dsi_novatek_panel_device = {
	.name = "mipi_novatek",
	.id = 0,
	.dev = {
		.platform_data = &novatek_pdata,
	}
};

static struct platform_device mipi_dsi2lvds_bridge_device = {
	.name = "mipi_tc358764",
	.id = 0,
	.dev.platform_data = &mipi_dsi2lvds_pdata,
};

#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
static struct resource hdmi_msm_resources[] = {
	{
		.name  = "hdmi_msm_qfprom_addr",
		.start = 0x00700000,
		.end   = 0x007060FF,
		.flags = IORESOURCE_MEM,
	},
	{
		.name  = "hdmi_msm_hdmi_addr",
		.start = 0x04A00000,
		.end   = 0x04A00FFF,
		.flags = IORESOURCE_MEM,
	},
	{
		.name  = "hdmi_msm_irq",
		.start = HDMI_IRQ,
		.end   = HDMI_IRQ,
		.flags = IORESOURCE_IRQ,
	},
};

static int hdmi_enable_5v(int on);
static int hdmi_core_power(int on, int show);
static int hdmi_cec_power(int on);

static struct msm_hdmi_platform_data hdmi_msm_data = {
	.irq = HDMI_IRQ,
	.enable_5v = hdmi_enable_5v,
	.core_power = hdmi_core_power,
	.cec_power = hdmi_cec_power,
};

static struct platform_device hdmi_msm_device = {
	.name = "hdmi_msm",
	.id = 0,
	.num_resources = ARRAY_SIZE(hdmi_msm_resources),
	.resource = hdmi_msm_resources,
	.dev.platform_data = &hdmi_msm_data,
};
#endif /* CONFIG_FB_MSM_HDMI_MSM_PANEL */

#ifdef CONFIG_FB_MSM_WRITEBACK_MSM_PANEL
static struct platform_device wfd_panel_device = {
	.name = "wfd_panel",
	.id = 0,
	.dev.platform_data = NULL,
};

static struct platform_device wfd_device = {
	.name          = "msm_wfd",
	.id            = -1,
};
#endif

#ifdef CONFIG_MSM_BUS_SCALING
static struct msm_bus_vectors dtv_bus_init_vectors[] = {
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 0,
		.ib = 0,
	},
};

#ifdef CONFIG_FB_MSM_HDMI_AS_PRIMARY
static struct msm_bus_vectors dtv_bus_def_vectors[] = {
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 2000000000,
		.ib = 2000000000,
	},
};
#else
static struct msm_bus_vectors dtv_bus_def_vectors[] = {
	{
		.src = MSM_BUS_MASTER_MDP_PORT0,
		.dst = MSM_BUS_SLAVE_EBI_CH0,
		.ab = 566092800 * 2,
		.ib = 707616000 * 2,
	},
};
#endif

static struct msm_bus_paths dtv_bus_scale_usecases[] = {
	{
		ARRAY_SIZE(dtv_bus_init_vectors),
		dtv_bus_init_vectors,
	},
	{
		ARRAY_SIZE(dtv_bus_def_vectors),
		dtv_bus_def_vectors,
	},
};
static struct msm_bus_scale_pdata dtv_bus_scale_pdata = {
	dtv_bus_scale_usecases,
	ARRAY_SIZE(dtv_bus_scale_usecases),
	.name = "dtv",
};

static struct lcdc_platform_data dtv_pdata = {
	.bus_scale_table = &dtv_bus_scale_pdata,
};
#endif

static struct gpiomux_setting mdp_vsync_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting mdp_vsync_active_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct msm_gpiomux_config msm8960_mdp_vsync_configs[] __initdata = {
	{
		.gpio = MDP_VSYNC_GPIO,
		.settings = {
			[GPIOMUX_ACTIVE]    = &mdp_vsync_active_cfg,
			[GPIOMUX_SUSPENDED] = &mdp_vsync_suspend_cfg,
		},
	}
};

#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
static struct gpiomux_setting hdmi_suspend_cfg = {
	.func = GPIOMUX_FUNC_GPIO,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct gpiomux_setting hdmi_active_1_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_UP,
};

static struct gpiomux_setting hdmi_active_2_cfg = {
	.func = GPIOMUX_FUNC_1,
	.drv = GPIOMUX_DRV_2MA,
	.pull = GPIOMUX_PULL_DOWN,
};

static struct msm_gpiomux_config msm8960_hdmi_configs[] __initdata = {
	{
		.gpio = 99,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
	{
		.gpio = 100,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
	{
		.gpio = 101,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_1_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
	{
		.gpio = 102,
		.settings = {
			[GPIOMUX_ACTIVE]    = &hdmi_active_2_cfg,
			[GPIOMUX_SUSPENDED] = &hdmi_suspend_cfg,
		},
	},
};

static int hdmi_enable_5v(int on)
{
	/* TBD: PM8921 regulator instead of 8901 */
	static struct regulator *reg_8921_hdmi_mvs;	/* HDMI_5V */
	static int prev_on;
	int rc;

	if (on == prev_on)
		return 0;

	if (!reg_8921_hdmi_mvs)
		reg_8921_hdmi_mvs = regulator_get(&hdmi_msm_device.dev,
			"hdmi_mvs");

	if (on) {
		rc = regulator_enable(reg_8921_hdmi_mvs);
		if (rc) {
			pr_err("'%s' regulator enable failed, rc=%d\n",
				"8921_hdmi_mvs", rc);
			return rc;
		}
		pr_debug("%s(on): success\n", __func__);
	} else {
		rc = regulator_disable(reg_8921_hdmi_mvs);
		if (rc)
			pr_warning("'%s' regulator disable failed, rc=%d\n",
				"8921_hdmi_mvs", rc);
		pr_debug("%s(off): success\n", __func__);
	}

	prev_on = on;

	return 0;
}

static int hdmi_core_power(int on, int show)
{
	static struct regulator *reg_8921_l23, *reg_8921_s4;
	static int prev_on;
	int rc;

	if (on == prev_on)
		return 0;

	/* TBD: PM8921 regulator instead of 8901 */
	if (!reg_8921_l23) {
		reg_8921_l23 = regulator_get(&hdmi_msm_device.dev, "hdmi_avdd");
		if (IS_ERR(reg_8921_l23)) {
			pr_err("could not get reg_8921_l23, rc = %ld\n",
				PTR_ERR(reg_8921_l23));
			return -ENODEV;
		}
		rc = regulator_set_voltage(reg_8921_l23, 1800000, 1800000);
		if (rc) {
			pr_err("set_voltage failed for 8921_l23, rc=%d\n", rc);
			return -EINVAL;
		}
	}
	if (!reg_8921_s4) {
		reg_8921_s4 = regulator_get(&hdmi_msm_device.dev, "hdmi_vcc");
		if (IS_ERR(reg_8921_s4)) {
			pr_err("could not get reg_8921_s4, rc = %ld\n",
				PTR_ERR(reg_8921_s4));
			return -ENODEV;
		}
		rc = regulator_set_voltage(reg_8921_s4, 1800000, 1800000);
		if (rc) {
			pr_err("set_voltage failed for 8921_s4, rc=%d\n", rc);
			return -EINVAL;
		}
	}

	if (on) {
		rc = regulator_set_optimum_mode(reg_8921_l23, 100000);
		if (rc < 0) {
			pr_err("set_optimum_mode l23 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		rc = regulator_enable(reg_8921_l23);
		if (rc) {
			pr_err("'%s' regulator enable failed, rc=%d\n",
				"hdmi_avdd", rc);
			return rc;
		}
		rc = regulator_enable(reg_8921_s4);
		if (rc) {
			pr_err("'%s' regulator enable failed, rc=%d\n",
				"hdmi_vcc", rc);
			return rc;
		}
		rc = gpio_request(100, "HDMI_DDC_CLK");
		if (rc) {
			pr_err("'%s'(%d) gpio_request failed, rc=%d\n",
				"HDMI_DDC_CLK", 100, rc);
			goto error1;
		}
		rc = gpio_request(101, "HDMI_DDC_DATA");
		if (rc) {
			pr_err("'%s'(%d) gpio_request failed, rc=%d\n",
				"HDMI_DDC_DATA", 101, rc);
			goto error2;
		}
		rc = gpio_request(102, "HDMI_HPD");
		if (rc) {
			pr_err("'%s'(%d) gpio_request failed, rc=%d\n",
				"HDMI_HPD", 102, rc);
			goto error3;
		}
		pr_debug("%s(on): success\n", __func__);
	} else {
		gpio_free(100);
		gpio_free(101);
		gpio_free(102);

		rc = regulator_disable(reg_8921_l23);
		if (rc) {
			pr_err("disable reg_8921_l23 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_disable(reg_8921_s4);
		if (rc) {
			pr_err("disable reg_8921_s4 failed, rc=%d\n", rc);
			return -ENODEV;
		}
		rc = regulator_set_optimum_mode(reg_8921_l23, 100);
		if (rc < 0) {
			pr_err("set_optimum_mode l23 failed, rc=%d\n", rc);
			return -EINVAL;
		}
		pr_debug("%s(off): success\n", __func__);
	}

	prev_on = on;

	return 0;

error3:
	gpio_free(101);
error2:
	gpio_free(100);
error1:
	regulator_disable(reg_8921_l23);
	regulator_disable(reg_8921_s4);
	return rc;
}

static int hdmi_cec_power(int on)
{
	static int prev_on;
	int rc;

	if (on == prev_on)
		return 0;

	if (on) {
		rc = gpio_request(99, "HDMI_CEC_VAR");
		if (rc) {
			pr_err("'%s'(%d) gpio_request failed, rc=%d\n",
				"HDMI_CEC_VAR", 99, rc);
			goto error;
		}
		pr_debug("%s(on): success\n", __func__);
	} else {
		gpio_free(99);
		pr_debug("%s(off): success\n", __func__);
	}

	prev_on = on;

	return 0;
error:
	return rc;
}
#endif /* CONFIG_FB_MSM_HDMI_MSM_PANEL */

void __init msm8960_init_fb(void)
{
#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
	msm_gpiomux_install(msm8960_hdmi_configs,
			ARRAY_SIZE(msm8960_hdmi_configs));
#endif

	msm_gpiomux_install(msm8960_mdp_vsync_configs,
			ARRAY_SIZE(msm8960_mdp_vsync_configs));

	platform_device_register(&msm_fb_device);

#ifdef CONFIG_FB_MSM_WRITEBACK_MSM_PANEL
	platform_device_register(&wfd_panel_device);
	platform_device_register(&wfd_device);
#endif

	if (machine_is_msm8960_sim())
		platform_device_register(&mipi_dsi_simulator_panel_device);

	if (machine_is_msm8960_rumi3())
		platform_device_register(&mipi_dsi_renesas_panel_device);

	if (!machine_is_msm8960_sim() && !machine_is_msm8960_rumi3()) {
		platform_device_register(&mipi_dsi_novatek_panel_device);

#ifdef CONFIG_FB_MSM_HDMI_MSM_PANEL
		platform_device_register(&hdmi_msm_device);
#endif
	}

	if (machine_is_msm8960_liquid())
		platform_device_register(&mipi_dsi2lvds_bridge_device);
	else
		platform_device_register(&mipi_dsi_toshiba_panel_device);

	if (machine_is_msm8x60_rumi3()) {
		msm_fb_register_device("mdp", NULL);
		mipi_dsi_pdata.target_type = 1;
	} else
		msm_fb_register_device("mdp", &mdp_pdata);
	msm_fb_register_device("mipi_dsi", &mipi_dsi_pdata);
#ifdef CONFIG_MSM_BUS_SCALING
	msm_fb_register_device("dtv", &dtv_pdata);
#endif
}

void __init msm8960_allocate_fb_region(void)
{
	void *addr;
	unsigned long size;

	size = MSM_FB_SIZE;
	addr = alloc_bootmem_align(size, 0x1000);
	msm_fb_resources[0].start = __pa(addr);
	msm_fb_resources[0].end = msm_fb_resources[0].start + size - 1;
	pr_info("allocating %lu bytes at %p (%lx physical) for fb\n",
			size, addr, __pa(addr));
}