Merge branch 'for-rmk/samsung5' of git://git.fluff.org/bjdooks/linux into devel-stable
Conflicts:
arch/arm/Kconfig
arch/arm/Makefile
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ee74c3a..14b0368 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -631,9 +631,24 @@
config ARCH_S3C64XX
bool "Samsung S3C64XX"
+ select PLAT_SAMSUNG
+ select CPU_V6
select GENERIC_GPIO
+ select ARM_VIC
select HAVE_CLK
+ select NO_IOPORT
select ARCH_HAS_CPUFREQ
+ select ARCH_REQUIRE_GPIOLIB
+ select SAMSUNG_CLKSRC
+ select SAMSUNG_IRQ_VIC_TIMER
+ select SAMSUNG_IRQ_UART
+ select S3C_GPIO_TRACK
+ select S3C_GPIO_PULL_UPDOWN
+ select S3C_GPIO_CFG_S3C24XX
+ select S3C_GPIO_CFG_S3C64XX
+ select S3C_DEV_NAND
+ select USB_ARCH_HAS_OHCI
+ select SAMSUNG_GPIOLIB_4BIT
help
Samsung S3C64XX series based systems
@@ -645,6 +660,14 @@
help
Samsung S5P6440 CPU based systems
+config ARCH_S5P6442
+ bool "Samsung S5P6442"
+ select CPU_V6
+ select GENERIC_GPIO
+ select HAVE_CLK
+ help
+ Samsung S5P6442 CPU based systems
+
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
select GENERIC_GPIO
@@ -653,6 +676,15 @@
help
Samsung S5PC1XX series based systems
+config ARCH_S5PV210
+ bool "Samsung S5PV210/S5PC110"
+ select CPU_V7
+ select GENERIC_GPIO
+ select HAVE_CLK
+ select ARM_L1_CACHE_SHIFT_6
+ help
+ Samsung S5PV210/S5PC110 series based systems
+
config ARCH_SHARK
bool "Shark"
select CPU_SA110
@@ -816,8 +848,6 @@
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
-source "arch/arm/plat-s3c64xx/Kconfig"
-source "arch/arm/plat-s3c/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
@@ -826,25 +856,27 @@
source "arch/arm/mach-s3c2410/Kconfig"
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
-source "arch/arm/mach-s3c2442/Kconfig"
source "arch/arm/mach-s3c2443/Kconfig"
endif
if ARCH_S3C64XX
-source "arch/arm/mach-s3c6400/Kconfig"
-source "arch/arm/mach-s3c6410/Kconfig"
+source "arch/arm/mach-s3c64xx/Kconfig"
endif
source "arch/arm/mach-s5p6440/Kconfig"
-source "arch/arm/mach-shmobile/Kconfig"
-
-source "arch/arm/plat-stmp3xxx/Kconfig"
+source "arch/arm/mach-s5p6442/Kconfig"
if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
+source "arch/arm/mach-s5pv210/Kconfig"
+
+source "arch/arm/mach-shmobile/Kconfig"
+
+source "arch/arm/plat-stmp3xxx/Kconfig"
+
source "arch/arm/mach-u300/Kconfig"
source "arch/arm/mach-ux500/Kconfig"
@@ -1092,7 +1124,7 @@
config HZ
int
default 128 if ARCH_L7200
- default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440
+ default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default 100
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 5cb9326..91344af 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -117,7 +117,7 @@
cause the debug messages to appear on the first serial port.
config DEBUG_S3C_UART
- depends on PLAT_S3C
+ depends on PLAT_SAMSUNG
int "S3C UART to use for low-level debug"
default "0"
help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 10e933b..2dca13f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,11 +160,13 @@
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
-machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
-machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
+machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
+machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
@@ -180,15 +182,15 @@
# by CONFIG_* macro name.
plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
-plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c samsung
-plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c samsung
-plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx s3c samsung
-plat-$(CONFIG_PLAT_S5P) := s5p samsung s3c
+plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
+plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
+plat-$(CONFIG_PLAT_S5P) := s5p samsung
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index f56e50f..5e7d4c1 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -1,14 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Mon Nov 3 10:10:30 2008
+# Linux kernel version: 2.6.33-rc4
+# Tue Jan 19 13:12:40 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
-CONFIG_MMU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
@@ -18,13 +15,13 @@
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
@@ -34,13 +31,30 @@
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -50,8 +64,13 @@
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@@ -62,32 +81,38 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -95,11 +120,8 @@
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -107,33 +129,62 @@
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
@@ -141,35 +192,62 @@
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
CONFIG_ARCH_S3C64XX=y
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+CONFIG_S3C_DEV_HSMMC=y
+CONFIG_S3C_DEV_HSMMC1=y
+CONFIG_S3C_DEV_I2C1=y
+CONFIG_S3C_DEV_FB=y
+CONFIG_S3C_DEV_USB_HOST=y
+CONFIG_S3C_DEV_USB_HSOTG=y
+CONFIG_S3C_DEV_NAND=y
CONFIG_PLAT_S3C64XX=y
CONFIG_CPU_S3C6400_INIT=y
CONFIG_CPU_S3C6400_CLOCK=y
+# CONFIG_S3C64XX_DMA is not set
CONFIG_S3C64XX_SETUP_I2C0=y
CONFIG_S3C64XX_SETUP_I2C1=y
+CONFIG_S3C64XX_SETUP_FB_24BPP=y
+CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y
CONFIG_PLAT_S3C=y
#
# Boot options
#
CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
#
# Power management
@@ -177,17 +255,16 @@
CONFIG_S3C_LOWLEVEL_UART_PORT=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
-CONFIG_S3C_GPIO_PULL_UPDOWN=y
-CONFIG_S3C_GPIO_CFG_S3C24XX=y
-CONFIG_S3C_GPIO_CFG_S3C64XX=y
-CONFIG_S3C_DEV_HSMMC=y
-CONFIG_S3C_DEV_HSMMC1=y
-CONFIG_S3C_DEV_I2C1=y
+# CONFIG_MACH_SMDK6400 is not set
CONFIG_CPU_S3C6410=y
CONFIG_S3C6410_SETUP_SDHCI=y
+# CONFIG_MACH_ANW6410 is not set
CONFIG_MACH_SMDK6410=y
CONFIG_SMDK6410_SD_CH0=y
# CONFIG_SMDK6410_SD_CH1 is not set
+# CONFIG_SMDK6410_WM1190_EV1 is not set
+# CONFIG_MACH_NCP is not set
+# CONFIG_MACH_HMT is not set
#
# Processor Type
@@ -196,7 +273,7 @@
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@@ -212,8 +289,10 @@
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
#
# Bus support
@@ -229,13 +308,15 @@
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -243,26 +324,28 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_SPLIT_PTLOCK_CPUS=999999
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M"
+CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
+# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set
#
@@ -300,6 +383,7 @@
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
@@ -314,14 +398,32 @@
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -334,6 +436,7 @@
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
+# CONFIG_PHONE is not set
#
# Input device support
@@ -341,6 +444,7 @@
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@@ -357,27 +461,33 @@
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
@@ -390,6 +500,7 @@
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
@@ -423,16 +534,18 @@
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
@@ -443,6 +556,7 @@
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_S3C2410=y
@@ -463,32 +577,33 @@
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
+# Memory mapped GPIO expanders:
+#
+
+#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
@@ -497,10 +612,19 @@
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
@@ -509,17 +633,21 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
@@ -530,16 +658,24 @@
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -549,15 +685,14 @@
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -568,28 +703,22 @@
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
@@ -612,17 +741,15 @@
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
#
# Special HID drivers
#
-# CONFIG_HID_COMPAT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
@@ -631,9 +758,13 @@
#
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_UNSAFE_RESUME=y
@@ -650,22 +781,24 @@
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_SDHCI_S3C=y
+# CONFIG_MMC_SDHCI_S3C_DMA is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
#
-# Voltage and Current regulators
+# TI VLYNQ
#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -674,6 +807,7 @@
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
@@ -683,9 +817,12 @@
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -696,6 +833,11 @@
CONFIG_GENERIC_ACL=y
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -719,10 +861,7 @@
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -731,12 +870,17 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
@@ -755,6 +899,7 @@
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
@@ -763,12 +908,16 @@
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
@@ -787,34 +936,43 @@
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
CONFIG_DEBUG_S3C_UART=0
#
@@ -823,13 +981,19 @@
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
@@ -838,6 +1002,10 @@
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig
new file mode 100644
index 0000000..74e20bf
--- /dev/null
+++ b/arch/arm/configs/s5p6442_defconfig
@@ -0,0 +1,883 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Mon Jan 25 08:50:28 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+CONFIG_ARCH_S5P6442=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6442=y
+CONFIG_MACH_SMDK6442=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig
new file mode 100644
index 0000000..6ea6361
--- /dev/null
+++ b/arch/arm/configs/s5pc110_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:54 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+# CONFIG_MACH_SMDKV210 is not set
+CONFIG_MACH_SMDKC110=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig
new file mode 100644
index 0000000..3f7d474
--- /dev/null
+++ b/arch/arm/configs/s5pv210_defconfig
@@ -0,0 +1,894 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc4
+# Wed Feb 24 15:36:16 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+CONFIG_ARCH_S5PV210=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIOLIB_4BIT=y
+CONFIG_S3C_GPIO_CFG_S3C24XX=y
+CONFIG_S3C_GPIO_CFG_S3C64XX=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+# CONFIG_S3C_ADC is not set
+
+#
+# Power management
+#
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5PV210=y
+CONFIG_MACH_SMDKV210=y
+# CONFIG_MACH_SMDKC110 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=200
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS_4=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5PV210=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+CONFIG_SOLARIS_X86_PARTITION=y
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 63b753f..0d8e043 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -21,7 +21,7 @@
#include <mach/dma.h>
#include <plat/cpu.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/plat-s3c24xx/include/plat/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h
similarity index 96%
rename from arch/arm/plat-s3c24xx/include/plat/pm-core.h
rename to arch/arm/mach-s3c2410/include/mach/pm-core.h
index fb45dd9..70a83b2 100644
--- a/arch/arm/plat-s3c24xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h
+/* linux/arch/arm/mach-s3c2410/include/pm-core.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index ebc85c6..fd672f3 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -406,31 +406,31 @@
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
+#define S3C2443_GPE5_AC_BITCLK (0x03 << 10)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
-#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2443_GPE6_AC_SDI (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
-#define S3C2443_GPE7_AC_SDI (0x03 << 14)
+#define S3C2443_GPE7_AC_SDO (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
-#define S3C2443_GPE8_AC_SDO (0x03 << 16)
+#define S3C2443_GPE8_AC_SYNC (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
-#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
+#define S3C2443_GPE9_AC_nRESET (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
-#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
similarity index 99%
rename from arch/arm/plat-s3c/include/mach/timex.h
rename to arch/arm/mach-s3c2410/include/mach/timex.h
index 2a425ed..fe9ca1f 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
similarity index 91%
rename from arch/arm/plat-s3c/include/mach/vmalloc.h
rename to arch/arm/mach-s3c2410/include/mach/vmalloc.h
index bfd2ca6..315b007 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
*
* from arch/arm/mach-iop3xx/include/mach/vmalloc.h
*
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index f8d16fc..e880524 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -20,7 +20,7 @@
#include <mach/dma.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8087935..7f46526 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -15,14 +15,67 @@
help
Support for S3C2440 Samsung Mobile CPU based systems.
+config CPU_S3C2442
+ bool
+ depends on ARCH_S3C2410
+ select CPU_ARM920T
+ select S3C2410_CLOCK
+ select S3C2410_GPIO
+ select S3C2410_PM if PM
+ select CPU_S3C244X
+ select CPU_LLSERIAL_S3C2440
+ help
+ Support for S3C2442 Samsung Mobile CPU based systems.
+
+config CPU_S3C244X
+ bool
+ depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
+ help
+ Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
+
+
+
+config S3C2440_CPUFREQ
+ bool "S3C2440/S3C2442 CPU Frequency scaling support"
+ depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+ select S3C2410_CPUFREQ_UTILS
+ default y
+ help
+ CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
+config S3C2440_XTAL_12000000
+ bool
+ help
+ Indicate that the build needs to support 12MHz system
+ crystal.
+
+config S3C2440_XTAL_16934400
+ bool
+ help
+ Indicate that the build needs to support 16.9344MHz system
+ crystal.
+
+config S3C2440_PLL_12000000
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+ bool
+ depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+ default y if CPU_FREQ_S3C24XX_PLL
+ help
+ PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
config S3C2440_DMA
bool
depends on ARCH_S3C2410 && CPU_S3C24405B
help
Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 Machines"
+menu "S3C2440 and S3C2442 Machines"
config MACH_ANUBIS
bool "Simtec Electronics ANUBIS"
@@ -37,6 +90,18 @@
Say Y here if you are using the Simtec Electronics ANUBIS
development system
+config MACH_NEO1973_GTA02
+ bool "Openmoko GTA02 / Freerunner phone"
+ select CPU_S3C2442
+ select MFD_PCF50633
+ select PCF50633_GPIO
+ select I2C
+ select POWER_SUPPLY
+ select MACH_NEO1973
+ select S3C2410_PWM
+ help
+ Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
+
config MACH_OSIRIS
bool "Simtec IM2440D20 (OSIRIS) module"
select CPU_S3C2440
@@ -94,11 +159,14 @@
config SMDK2440_CPU2440
bool "SMDK2440 with S3C2440 CPU module"
- depends on ARCH_S3C2440
default y if ARCH_S3C2440
select S3C2440_XTAL_16934400
select CPU_S3C2440
+config SMDK2440_CPU2442
+ bool "SMDM2440 with S3C2442 CPU module"
+ select CPU_S3C2442
+
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index 5f32245..c85ba32 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -10,10 +10,20 @@
obj- :=
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
+obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
+
obj-$(CONFIG_CPU_S3C2440) += irq.o
obj-$(CONFIG_CPU_S3C2440) += clock.o
obj-$(CONFIG_S3C2440_DMA) += dma.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
+
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
# Machine support
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
@@ -23,6 +33,7 @@
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
# extra machine support
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index e08e081..3b0529f 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -20,7 +20,7 @@
#include <mach/map.h>
#include <mach/dma.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 5540442..9ea66e3 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -28,7 +28,7 @@
#include <mach/regs-dsc.h>
#include <plat/cpu.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
int s3c2440_set_dsc(unsigned int pin, unsigned int value)
{
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2440/include/mach/gta02.h
similarity index 100%
rename from arch/arm/mach-s3c2442/include/mach/gta02.h
rename to arch/arm/mach-s3c2440/include/mach/gta02.h
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
similarity index 100%
rename from arch/arm/mach-s3c2442/mach-gta02.c
rename to arch/arm/mach-s3c2440/mach-gta02.c
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 86a243b..3420415 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -41,7 +41,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index df3e9a3..3ac3d63 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index ac1f7ea..2b68f7e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -29,9 +29,9 @@
#include <mach/hardware.h>
#include <asm/irq.h>
-#include <plat/s3c2440.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2440/s3c2442.c
similarity index 92%
rename from arch/arm/mach-s3c2442/clock.c
rename to arch/arm/mach-s3c2440/s3c2442.c
index d9b692a..188ad1e 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -1,10 +1,10 @@
-/* linux/arch/arm/mach-s3c2442/clock.c
+/* linux/arch/arm/mach-s3c2442/s3c2442.c
*
* Copyright (c) 2004-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2442 Clock support
+ * S3C2442 core and lock support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -151,3 +151,15 @@
}
arch_initcall(s3c2442_clk_init);
+
+
+static struct sys_device s3c2442_sysdev = {
+ .cls = &s3c2442_sysclass,
+};
+
+int __init s3c2442_init(void)
+{
+ printk("S3C2442: Initialising architecture\n");
+
+ return sysdev_register(&s3c2442_sysdev);
+}
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-clock.c
rename to arch/arm/mach-s3c2440/s3c244x-clock.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/mach-s3c2440/s3c244x-irq.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/s3c244x-irq.c
rename to arch/arm/mach-s3c2440/s3c244x-irq.c
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/mach-s3c2440/s3c244x.c
similarity index 98%
rename from arch/arm/plat-s3c24xx/s3c244x.c
rename to arch/arm/mach-s3c2440/s3c244x.c
index 12623a4..5e4a97e 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c2440/s3c244x.c
@@ -38,8 +38,7 @@
#include <mach/regs-dsc.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
-#include "s3c244x.h"
+#include <plat/s3c244x.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
deleted file mode 100644
index 8d38118..0000000
--- a/arch/arm/mach-s3c2442/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config CPU_S3C2442
- bool
- depends on ARCH_S3C2410
- select CPU_ARM920T
- select S3C2410_CLOCK
- select S3C2410_GPIO
- select S3C2410_PM if PM
- select CPU_S3C244X
- select CPU_LLSERIAL_S3C2440
- help
- Support for S3C2442 Samsung Mobile CPU based systems.
-
-
-menu "S3C2442 Machines"
-
-config SMDK2440_CPU2442
- bool "SMDM2440 with S3C2442 CPU module"
- depends on ARCH_S3C2440
- select CPU_S3C2442
-
-config MACH_NEO1973_GTA02
- bool "Openmoko GTA02 / Freerunner phone"
- select CPU_S3C2442
- select MFD_PCF50633
- select PCF50633_GPIO
- select I2C
- select POWER_SUPPLY
- select MACH_NEO1973
- select S3C2410_PWM
- help
- Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-endmenu
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
deleted file mode 100644
index 2a19113..0000000
--- a/arch/arm/mach-s3c2442/Makefile
+++ /dev/null
@@ -1,18 +0,0 @@
-# arch/arm/mach-s3c2442/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C2442) += clock.o
-
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
-# Machine support
-
diff --git a/arch/arm/mach-s3c2442/s3c2442.c b/arch/arm/mach-s3c2442/s3c2442.c
deleted file mode 100644
index 4663bdc..0000000
--- a/arch/arm/mach-s3c2442/s3c2442.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2442/s3c2442.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2442 Mobile CPU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/sysdev.h>
-
-#include <plat/s3c2442.h>
-#include <plat/cpu.h>
-
-static struct sys_device s3c2442_sysdev = {
- .cls = &s3c2442_sysclass,
-};
-
-int __init s3c2442_init(void)
-{
- printk("S3C2442: Initialising architecture\n");
-
- return sysdev_register(&s3c2442_sysdev);
-}
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index 397f3b5..3f65868 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -20,7 +20,7 @@
#include <mach/dma.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 039a462..e2e362b 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/s3c2410.h>
-#include <plat/s3c2440.h>
+#include <plat/s3c2443.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -106,6 +106,9 @@
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_hsmmc0,
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+ &s3c_device_ac97,
+#endif
};
static void __init smdk2443_map_io(void)
@@ -118,6 +121,11 @@
static void __init smdk2443_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
+
+#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
+ s3c24xx_ac97_setup_gpio(S3C24XX_AC97_GPE0);
+#endif
+
platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices));
smdk_machine_init();
}
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h
similarity index 72%
rename from arch/arm/plat-s3c/include/mach/io.h
rename to arch/arm/mach-s3c24a0/include/mach/io.h
index f6a5363..4326c30 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s3c24a0/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c24a0/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C24A0
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
deleted file mode 100644
index a250bf6..0000000
--- a/arch/arm/mach-s3c6400/Kconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6400
- bool
- select CPU_S3C6400_INIT
- select CPU_S3C6400_CLOCK
- help
- Enable S3C6400 CPU support
-
-config S3C6400_SETUP_SDHCI
- bool
- help
- Internal configuration for default SDHCI
- setup for S3C6400.
-
-# S36400 Macchine support
-
-config MACH_SMDK6400
- bool "SMDK6400"
- select CPU_S3C6400
- select S3C_DEV_HSMMC
- select S3C_DEV_NAND
- select S3C6400_SETUP_SDHCI
- help
- Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile
deleted file mode 100644
index df1ce4a..0000000
--- a/arch/arm/mach-s3c6400/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# arch/arm/mach-s3c6400/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S3C6400 system
-
-obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
-
-# setup support
-
-obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h
deleted file mode 100644
index 6723860..0000000
--- a/arch/arm/mach-s3c6400/include/mach/dma.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - DMA support
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H __FILE__
-
-#define S3C_DMA_CHANNELS (16)
-
-/* see mach-s3c2410/dma.h for notes on dma channel numbers */
-
-/* Note, for the S3C64XX architecture we keep the DMACH_
- * defines in the order they are allocated to [S]DMA0/[S]DMA1
- * so that is easy to do DHACH_ -> DMA controller conversion
- */
-enum dma_ch {
- /* DMA0/SDMA0 */
- DMACH_UART0 = 0,
- DMACH_UART0_SRC2,
- DMACH_UART1,
- DMACH_UART1_SRC2,
- DMACH_UART2,
- DMACH_UART2_SRC2,
- DMACH_UART3,
- DMACH_UART3_SRC2,
- DMACH_PCM0_TX,
- DMACH_PCM0_RX,
- DMACH_I2S0_OUT,
- DMACH_I2S0_IN,
- DMACH_SPI0_TX,
- DMACH_SPI0_RX,
- DMACH_HSI_I2SV40_TX,
- DMACH_HSI_I2SV40_RX,
-
- /* DMA1/SDMA1 */
- DMACH_PCM1_TX = 16,
- DMACH_PCM1_RX,
- DMACH_I2S1_OUT,
- DMACH_I2S1_IN,
- DMACH_SPI1_TX,
- DMACH_SPI1_RX,
- DMACH_AC97_PCMOUT,
- DMACH_AC97_PCMIN,
- DMACH_AC97_MICIN,
- DMACH_PWM,
- DMACH_IRDA,
- DMACH_EXTERNAL,
- DMACH_RES1,
- DMACH_RES2,
- DMACH_SECURITY_RX, /* SDMA1 only */
- DMACH_SECURITY_TX, /* SDMA1 only */
- DMACH_MAX /* the end */
-};
-
-static __inline__ bool s3c_dma_has_circular(void)
-{
- return true;
-}
-
-#define S3C2410_DMAF_CIRCULAR (1 << 0)
-
-#include <plat/dma.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h
deleted file mode 100644
index 4c97f9a..0000000
--- a/arch/arm/mach-s3c6400/include/mach/irqs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - IRQ definitions
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-clock.h b/arch/arm/mach-s3c6400/include/mach/regs-clock.h
deleted file mode 100644
index a6c7f4e..0000000
--- a/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - clock register compatibility with s3c24xx
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <plat/regs-clock.h>
-
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
deleted file mode 100644
index 162f456..0000000
--- a/arch/arm/mach-s3c6410/Kconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Configuration options for the S3C6410 CPU
-
-config CPU_S3C6410
- bool
- select CPU_S3C6400_INIT
- select CPU_S3C6400_CLOCK
- help
- Enable S3C6410 CPU support
-
-config S3C6410_SETUP_SDHCI
- bool
- select S3C64XX_SETUP_SDHCI_GPIO
- help
- Internal helper functions for S3C6410 based SDHCI systems
-
-config MACH_ANW6410
- bool "A&W6410"
- select CPU_S3C6410
- select S3C_DEV_FB
- select S3C64XX_SETUP_FB_24BPP
- help
- Machine support for the A&W6410
-
-config MACH_SMDK6410
- bool "SMDK6410"
- select CPU_S3C6410
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_I2C1
- select S3C_DEV_FB
- select S3C_DEV_USB_HOST
- select S3C_DEV_USB_HSOTG
- select S3C6410_SETUP_SDHCI
- select S3C64XX_SETUP_I2C1
- select S3C64XX_SETUP_FB_24BPP
- help
- Machine support for the Samsung SMDK6410
-
-# At least some of the SMDK6410s were shipped with the card detect
-# for the MMC/SD slots connected to the same input. This means that
-# either the boards need to be altered to have channel0 to an alternate
-# configuration or that only one slot can be used.
-
-choice
- prompt "SMDK6410 MMC/SD slot setup"
- depends on MACH_SMDK6410
-
-config SMDK6410_SD_CH0
- bool "Use channel 0 only"
- depends on MACH_SMDK6410
- help
- Select CON7 (channel 0) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-config SMDK6410_SD_CH1
- bool "Use channel 1 only"
- depends on MACH_SMDK6410
- help
- Select CON6 (channel 1) as the MMC/SD slot, as
- at least some SMDK6410 boards come with the
- resistors fitted so that the card detects for
- channels 0 and 1 are the same.
-
-endchoice
-
-config SMDK6410_WM1190_EV1
- bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
- depends on MACH_SMDK6410
- select REGULATOR
- select REGULATOR_WM8350
- select S3C24XX_GPIO_EXTRA64
- select MFD_WM8350_I2C
- select MFD_WM8350_CONFIG_MODE_0
- select MFD_WM8350_CONFIG_MODE_3
- select MFD_WM8352_CONFIG_MODE_0
- help
- The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
- and audio daughtercard for the Samsung SMDK6410 reference
- platform. Enabling this option will build support for this
- module into the kernel. The presence of the module will be
- detected at runtime so the the resulting kernel can be used
- with or without the 1190-EV1 fitted.
-
-config MACH_NCP
- bool "NCP"
- select CPU_S3C6410
- select S3C_DEV_I2C1
- select S3C_DEV_HSMMC1
- select S3C64XX_SETUP_I2C1
- help
- Machine support for the Samsung NCP
-
-config MACH_HMT
- bool "Airgoo HMT"
- select CPU_S3C6410
- select S3C_DEV_FB
- select S3C_DEV_NAND
- select S3C_DEV_USB_HOST
- select S3C64XX_SETUP_FB_24BPP
- select HAVE_PWM
- help
- Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
deleted file mode 100644
index 3e48c3d..0000000
--- a/arch/arm/mach-s3c6410/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-# arch/arm/plat-s3c6410/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for S3C6410 system
-
-obj-$(CONFIG_CPU_S3C6410) += cpu.o
-
-# Helper and device support
-
-obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o
-
-# machine support
-
-obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
-obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
-obj-$(CONFIG_MACH_NCP) += mach-ncp.o
-obj-$(CONFIG_MACH_HMT) += mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
deleted file mode 100644
index 816d2d9..0000000
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c6410_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "mmc_bus",
- /* [3] = "48m", - note not successfully used yet */
-};
-
-
-void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything acording to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
new file mode 100644
index 0000000..959df38
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -0,0 +1,180 @@
+# Copyright 2008 Openmoko, Inc.
+# Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+#
+# Licensed under GPLv2
+
+# temporary until we can eliminate all drivers using it.
+config PLAT_S3C64XX
+ bool
+ depends on ARCH_S3C64XX
+ default y
+ help
+ Base platform code for any Samsung S3C64XX device
+
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+ bool
+ help
+ Enable S3C6400 CPU support
+
+config CPU_S3C6410
+ bool
+ help
+ Enable S3C6410 CPU support
+
+config S3C64XX_DMA
+ bool "S3C64XX DMA"
+ select S3C_DMA
+
+config S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Internal configuration for default SDHCI setup for S3C6400 and
+ S3C6410 SoCs.
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+ bool
+ default y
+ help
+ Common setup code for i2c bus 0.
+
+ Note, currently since i2c0 is always compiled, this setup helper
+ is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+ bool
+ help
+ Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_FB_24BPP
+ bool
+ help
+ Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for S3C64XX SDHCI GPIO configurations
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+ bool "SMDK6400"
+ select CPU_S3C6400
+ select S3C_DEV_HSMMC
+ select S3C_DEV_NAND
+ select S3C64XX_SETUP_SDHCI
+ help
+ Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+ bool "A&W6410"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the A&W6410
+
+config MACH_SMDK6410
+ bool "SMDK6410"
+ select CPU_S3C6410
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_I2C1
+ select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
+ select S3C64XX_SETUP_SDHCI
+ select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+ prompt "SMDK6410 MMC/SD slot setup"
+ depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+ bool "Use channel 0 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON7 (channel 0) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+ bool "Use channel 1 only"
+ depends on MACH_SMDK6410
+ help
+ Select CON6 (channel 1) as the MMC/SD slot, as
+ at least some SMDK6410 boards come with the
+ resistors fitted so that the card detects for
+ channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+ bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ select REGULATOR
+ select REGULATOR_WM8350
+ select S3C24XX_GPIO_EXTRA64
+ select MFD_WM8350_I2C
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8350_CONFIG_MODE_3
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+ and audio daughtercard for the Samsung SMDK6410 reference
+ platform. Enabling this option will build support for this
+ module into the kernel. The presence of the module will be
+ detected at runtime so the the resulting kernel can be used
+ with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+ bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ select REGULATOR
+ select REGULATOR_WM831X
+ select S3C24XX_GPIO_EXTRA64
+ select MFD_WM831X
+ help
+ The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+ daughtercard for the Samsung SMDK6410 reference platform.
+ Enabling this option will build support for this module into
+ the kernel. The presence of the daughtercard will be
+ detected at runtime so the the resulting kernel can be used
+ with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+ bool "NCP"
+ select CPU_S3C6410
+ select S3C_DEV_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_I2C1
+ help
+ Machine support for the Samsung NCP
+
+config MACH_HMT
+ bool "Airgoo HMT"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
+ select S3C64XX_SETUP_FB_24BPP
+ select HAVE_PWM
+ help
+ Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
new file mode 100644
index 0000000..d1d341a
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -0,0 +1,62 @@
+# arch/arm/mach-s3c64xx/Makefile
+#
+# Copyright 2008 Openmoko, Inc.
+# Copyright 2008 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core files
+obj-y += cpu.o
+obj-y += clock.o
+obj-y += gpiolib.o
+
+# Core support for S3C6400 system
+
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
+
+obj-y += irq.o
+obj-y += irq-eint.o
+
+# CPU frequency scaling
+
+obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA) += dma.o
+
+# Device setup
+
+obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
+# PM
+
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_PM) += irq-pm.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
+obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+obj-$(CONFIG_MACH_HMT) += mach-hmt.o
+
+# device support
+
+obj-y += dev-uart.o
+obj-y += dev-rtc.o
+obj-$(CONFIG_S3C_ADC) += dev-adc.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
+obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot
similarity index 100%
rename from arch/arm/mach-s3c6400/Makefile.boot
rename to arch/arm/mach-s3c64xx/Makefile.boot
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/mach-s3c64xx/clock.c
similarity index 66%
rename from arch/arm/plat-s3c64xx/s3c6400-clock.c
rename to arch/arm/mach-s3c64xx/clock.c
index cb2bf4b..2ac2e7d 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -1,11 +1,11 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c
+/* linux/arch/arm/plat-s3c64xx/clock.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * S3C6400 based common clock support
+ * S3C64XX Base clock support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -14,24 +14,24 @@
#include <linux/init.h>
#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/clk.h>
-#include <linux/sysdev.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/map.h>
-#include <plat/cpu-freq.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-clock.h>
+#include <mach/pll.h>
-#include <plat/regs-clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/cpu-freq.h>
#include <plat/clock.h>
#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
* ext_xtal_mux for want of an actual name from the manual.
@@ -49,6 +49,259 @@
#define clk_fout_mpll clk_mpll
#define clk_fout_epll clk_epll
+struct clk clk_h2 = {
+ .name = "hclk2",
+ .id = -1,
+ .rate = 0,
+};
+
+struct clk clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+ unsigned long flags;
+ u32 val;
+
+ /* can't rely on clock lock, this register has other usages */
+ local_irq_save(flags);
+
+ val = __raw_readl(S3C64XX_OTHERS);
+ if (enable)
+ val |= S3C64XX_OTHERS_USBMASK;
+ else
+ val &= ~S3C64XX_OTHERS_USBMASK;
+
+ __raw_writel(val, S3C64XX_OTHERS);
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+struct clk clk_48m = {
+ .name = "clk_48m",
+ .id = -1,
+ .rate = 48000000,
+ .enable = clk_48m_ctrl,
+};
+
+static int inline s3c64xx_gate(void __iomem *reg,
+ struct clk *clk,
+ int enable)
+{
+ unsigned int ctrlbit = clk->ctrlbit;
+ u32 con;
+
+ con = __raw_readl(reg);
+
+ if (enable)
+ con |= ctrlbit;
+ else
+ con &= ~ctrlbit;
+
+ __raw_writel(con, reg);
+ return 0;
+}
+
+static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
+{
+ return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
+}
+
+static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
+{
+ return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
+}
+
+int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
+{
+ return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "nand",
+ .id = -1,
+ .parent = &clk_h,
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_TSADC,
+ }, {
+ .name = "i2c",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIC,
+ }, {
+ .name = "iis",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS0,
+ }, {
+ .name = "iis",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_IIS1,
+ }, {
+#ifdef CONFIG_CPU_S3C6410
+ .name = "iis",
+ .id = -1, /* There's only one IISv4 port */
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C6410_CLKCON_PCLK_IIS2,
+ }, {
+#endif
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_SPI0,
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_SPI1,
+ }, {
+ .name = "spi_48m",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
+ }, {
+ .name = "spi_48m",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
+ }, {
+ .name = "48m",
+ .id = 0,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC0_48,
+ }, {
+ .name = "48m",
+ .id = 1,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC1_48,
+ }, {
+ .name = "48m",
+ .id = 2,
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
+ }, {
+ .name = "dma0",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA0,
+ }, {
+ .name = "dma1",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA1,
+ },
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_LCD,
+ }, {
+ .name = "gpio",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_GPIO,
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_UHOST,
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_PWM,
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART0,
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART1,
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART2,
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_UART3,
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_RTC,
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C_CLKCON_PCLK_WDT,
+ }, {
+ .name = "ac97",
+ .id = -1,
+ .parent = &clk_p,
+ .ctrlbit = S3C_CLKCON_PCLK_AC97,
+ }
+};
+
+
static struct clk clk_fout_apll = {
.name = "fout_apll",
.id = -1,
@@ -492,7 +745,7 @@
s3c_set_clksrc(&clksrcs[ptr], true);
}
-static struct clk *clks[] __initdata = {
+static struct clk *clks1[] __initdata = {
&clk_ext_xtal_mux,
&clk_iis_cd0,
&clk_iis_cd1,
@@ -503,19 +756,29 @@
&clk_arm,
};
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_27m,
+ &clk_48m,
+ &clk_h2,
+};
+
/**
- * s3c6400_register_clocks - register clocks for s3c6400 and above
- * @armclk_divlimit: Divisor mask for ARMCLK
+ * s3c64xx_register_clocks - register clocks for s3c6400 and s3c6410
+ * @xtal: The rate for the clock crystal feeding the PLLs.
+ * @armclk_divlimit: Divisor mask for ARMCLK.
*
- * Register the clocks for the S3C6400 and above SoC range, such
- * as ARMCLK and the clocks which have divider chains attached.
+ * Register the clocks for the S3C6400 and S3C6410 SoC range, such
+ * as ARMCLK as well as the necessary parent clocks.
*
* This call does not setup the clocks, which is left to the
* s3c6400_setup_clocks() call which may be needed by the cpufreq
* or resume code to re-set the clocks if the bootloader has changed
* them.
*/
-void __init s3c6400_register_clocks(unsigned armclk_divlimit)
+void __init s3c64xx_register_clocks(unsigned long xtal,
+ unsigned armclk_divlimit)
{
struct clk *clkp;
int ret;
@@ -523,14 +786,24 @@
armclk_mask = armclk_divlimit;
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
+ s3c24xx_register_baseclocks(xtal);
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
ret = s3c24xx_register_clock(clkp);
if (ret < 0) {
printk(KERN_ERR "Failed to register clock %s (%d)\n",
clkp->name, ret);
}
+
+ (clkp->enable)(clkp, 0);
}
+ s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_pwmclk_init();
}
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
similarity index 93%
rename from arch/arm/plat-s3c64xx/cpu.c
rename to arch/arm/mach-s3c64xx/cpu.c
index bc7ca18..374e45e 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -33,8 +33,8 @@
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
/* table of supported CPUs */
@@ -129,6 +129,12 @@
.cls = &s3c64xx_sysclass,
};
+/* uart registration process */
+
+void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
+}
/* read cpu identification code */
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/cpufreq.c
rename to arch/arm/mach-s3c64xx/cpufreq.c
diff --git a/arch/arm/plat-s3c64xx/dev-adc.c b/arch/arm/mach-s3c64xx/dev-adc.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/dev-adc.c
rename to arch/arm/mach-s3c64xx/dev-adc.c
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/mach-s3c64xx/dev-audio.c
similarity index 74%
rename from arch/arm/plat-s3c64xx/dev-audio.c
rename to arch/arm/mach-s3c64xx/dev-audio.c
index f6b7bfb..c3e9e73 100644
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ b/arch/arm/mach-s3c64xx/dev-audio.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -19,12 +20,13 @@
#include <plat/devs.h>
#include <plat/audio.h>
-#include <plat/gpio-bank-c.h>
-#include <plat/gpio-bank-d.h>
-#include <plat/gpio-bank-e.h>
-#include <plat/gpio-bank-h.h>
#include <plat/gpio-cfg.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/gpio-bank-d.h>
+#include <mach/gpio-bank-e.h>
+#include <mach/gpio-bank-h.h>
+
static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
{
switch (pdev->id) {
@@ -254,3 +256,80 @@
},
};
EXPORT_SYMBOL(s3c64xx_device_pcm1);
+
+/* AC97 Controller platform devices */
+
+static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
+ s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
+ s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
+ s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
+
+ return 0;
+}
+
+static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
+{
+ s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
+ s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
+ s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
+ s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
+ s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
+
+ return 0;
+}
+
+static struct resource s3c64xx_ac97_resource[] = {
+ [0] = {
+ .start = S3C64XX_PA_AC97,
+ .end = S3C64XX_PA_AC97 + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = DMACH_AC97_PCMOUT,
+ .end = DMACH_AC97_PCMOUT,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = DMACH_AC97_PCMIN,
+ .end = DMACH_AC97_PCMIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [3] = {
+ .start = DMACH_AC97_MICIN,
+ .end = DMACH_AC97_MICIN,
+ .flags = IORESOURCE_DMA,
+ },
+ [4] = {
+ .start = IRQ_AC97,
+ .end = IRQ_AC97,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata;
+
+static u64 s3c64xx_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s3c64xx_device_ac97 = {
+ .name = "s3c-ac97",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c64xx_ac97_resource),
+ .resource = s3c64xx_ac97_resource,
+ .dev = {
+ .platform_data = &s3c_ac97_pdata,
+ .dma_mask = &s3c64xx_ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+EXPORT_SYMBOL(s3c64xx_device_ac97);
+
+void __init s3c64xx_ac97_setup_gpio(int num)
+{
+ if (num == S3C64XX_AC97_GPD)
+ s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpd;
+ else
+ s3c_ac97_pdata.cfg_gpio = s3c64xx_ac97_cfg_gpe;
+}
diff --git a/arch/arm/plat-s3c64xx/dev-rtc.c b/arch/arm/mach-s3c64xx/dev-rtc.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/dev-rtc.c
rename to arch/arm/mach-s3c64xx/dev-rtc.c
diff --git a/arch/arm/plat-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
similarity index 98%
rename from arch/arm/plat-s3c64xx/dev-spi.c
rename to arch/arm/mach-s3c64xx/dev-spi.c
index ca10388..29c32d0 100644
--- a/arch/arm/plat-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -16,11 +16,10 @@
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/gpio.h>
-
-#include <plat/spi-clocks.h>
+#include <mach/gpio-bank-c.h>
+#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-bank-c.h>
#include <plat/gpio-cfg.h>
#include <plat/irqs.h>
diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/mach-s3c64xx/dev-uart.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/dev-uart.c
rename to arch/arm/mach-s3c64xx/dev-uart.c
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/dma.c
rename to arch/arm/mach-s3c64xx/dma.c
index d554b93..b62bdf1 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -27,8 +27,7 @@
#include <mach/map.h>
#include <mach/irqs.h>
-#include <plat/dma-plat.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
#include <asm/hardware/pl080.h>
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/gpiolib.c
rename to arch/arm/mach-s3c64xx/gpiolib.c
index b6e3f55..66e6794 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/mach-s3c64xx/gpiolib.c
@@ -22,7 +22,7 @@
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
#include <plat/gpio-cfg-helpers.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
/* GPIO bank summary:
*
diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/debug-macro.S
rename to arch/arm/mach-s3c64xx/include/mach/debug-macro.S
diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h
new file mode 100644
index 0000000..0a5d926
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/include/mach/dma.h
@@ -0,0 +1,127 @@
+/* linux/arch/arm/mach-s3c6400/include/mach/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6400 - DMA support
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#define S3C_DMA_CHANNELS (16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+ /* DMA0/SDMA0 */
+ DMACH_UART0 = 0,
+ DMACH_UART0_SRC2,
+ DMACH_UART1,
+ DMACH_UART1_SRC2,
+ DMACH_UART2,
+ DMACH_UART2_SRC2,
+ DMACH_UART3,
+ DMACH_UART3_SRC2,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_OUT,
+ DMACH_I2S0_IN,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_HSI_I2SV40_TX,
+ DMACH_HSI_I2SV40_RX,
+
+ /* DMA1/SDMA1 */
+ DMACH_PCM1_TX = 16,
+ DMACH_PCM1_RX,
+ DMACH_I2S1_OUT,
+ DMACH_I2S1_IN,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_AC97_PCMOUT,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_MICIN,
+ DMACH_PWM,
+ DMACH_IRDA,
+ DMACH_EXTERNAL,
+ DMACH_RES1,
+ DMACH_RES2,
+ DMACH_SECURITY_RX, /* SDMA1 only */
+ DMACH_SECURITY_TX, /* SDMA1 only */
+ DMACH_MAX /* the end */
+};
+
+static __inline__ bool s3c_dma_has_circular(void)
+{
+ return true;
+}
+
+#define S3C2410_DMAF_CIRCULAR (1 << 0)
+
+#include <plat/dma.h>
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+ struct s3c64xx_dma_buff *next;
+
+ void *pw;
+ struct pl080s_lli *lli;
+ dma_addr_t lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+ unsigned char number; /* number of this dma channel */
+ unsigned char in_use; /* channel allocated */
+ unsigned char bit; /* bit for enable/disable/etc */
+ unsigned char hw_width;
+ unsigned char peripheral;
+
+ unsigned int flags;
+ enum s3c2410_dmasrc source;
+
+
+ dma_addr_t dev_addr;
+
+ struct s3c2410_dma_client *client;
+ struct s3c64xx_dmac *dmac; /* pointer to controller */
+
+ void __iomem *regs;
+
+ /* cdriver callbacks */
+ s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
+ s3c2410_dma_opfn_t op_fn; /* channel op callback */
+
+ /* buffer list and information */
+ struct s3c64xx_dma_buff *curr; /* current dma buffer */
+ struct s3c64xx_dma_buff *next; /* next buffer to load */
+ struct s3c64xx_dma_buff *end; /* end of queue */
+
+ /* note, when channel is running in circular mode, curr is the
+ * first buffer enqueued, end is the last and curr is where the
+ * last buffer-done event is set-at. The buffers are not freed
+ * and the last buffer hardware descriptor points back to the
+ * first.
+ */
+};
+
+#include <plat/dma-core.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
similarity index 95%
rename from arch/arm/mach-s3c6400/include/mach/entry-macro.S
rename to arch/arm/mach-s3c64xx/include/mach/entry-macro.S
index 33a8fe2..dd36260 100644
--- a/arch/arm/mach-s3c6400/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
@@ -13,6 +13,6 @@
*/
#include <mach/map.h>
-#include <plat/irqs.h>
+#include <mach/irqs.h>
#include <asm/entry-macro-vic2.S>
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
index 9aa0e42..34212e1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
index 3933adb..7232c03 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
index e22b49f..db189ab 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
index 6fe4a49..1a01cee 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
index 7fcf3d8..f057adb 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
index f3faff9..62ab8f5 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
index 35bbd23..b94954a 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
index 2ba1767..5d75aaa 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
index ce9ebe3..4ceaa60 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
index 21a9062..6f25cd0 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
index 569e761..d0aeda1 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
index b09e129..21868fa 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
similarity index 97%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
index 92f0051..46bcfb6 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
similarity index 95%
rename from arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
index 565e60a..1712223 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
similarity index 95%
rename from arch/arm/mach-s3c6400/include/mach/gpio.h
rename to arch/arm/mach-s3c64xx/include/mach/gpio.h
index e8e35e8..0d46e99 100644
--- a/arch/arm/mach-s3c6400/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -91,6 +91,10 @@
#define S3C_GPIO_END S3C64XX_GPIO_END
/* define the number of gpios we need to the one after the GPQ() range */
-#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+#define GPIO_BOARD_START (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1)
+
+#define BOARD_NR_GPIOS 16
+
+#define ARCH_NR_GPIOS (GPIO_BOARD_START + BOARD_NR_GPIOS)
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c64xx/include/mach/hardware.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/hardware.h
rename to arch/arm/mach-s3c64xx/include/mach/hardware.h
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s3c64xx/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s3c64xx/include/mach/io.h
index f6a5363..de5716d 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s3c64xx/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s3c64xxinclude/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C64XX based
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/irqs.h
rename to arch/arm/mach-s3c64xx/include/mach/irqs.h
index a227581..e9ab4ac 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h
@@ -1,15 +1,15 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * S3C64XX - Common IRQ support
+ * S3C64XX - IRQ support
*/
-#ifndef __ASM_PLAT_S3C64XX_IRQS_H
-#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
+#ifndef __ASM_MACH_S3C64XX_IRQS_H
+#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
/* we keep the first set of CPU IRQs out of the range of
* the ISA space, so that the PC104 has them to itself
@@ -200,6 +200,8 @@
#ifdef CONFIG_SMDK6410_WM1190_EV1
#define IRQ_BOARD_NR 64
+#elif defined(CONFIG_SMDK6410_WM1192_EV1)
+#define IRQ_BOARD_NR 64
#else
#define IRQ_BOARD_NR 16
#endif
@@ -210,5 +212,5 @@
#define NR_IRQS (IRQ_BOARD_END + 1)
-#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
+#endif /* __ASM_MACH_S3C64XX_IRQS_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/map.h
rename to arch/arm/mach-s3c64xx/include/mach/map.h
diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/memory.h
rename to arch/arm/mach-s3c64xx/include/mach/memory.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/pll.h
rename to arch/arm/mach-s3c64xx/include/mach/pll.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
similarity index 96%
rename from arch/arm/plat-s3c64xx/include/plat/pm-core.h
rename to arch/arm/mach-s3c64xx/include/mach/pm-core.h
index d347de3..1e9f20f 100644
--- a/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/pm-core.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -12,7 +12,7 @@
* published by the Free Software Foundation.
*/
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
static inline void s3c_pm_debug_init_uart(void)
{
diff --git a/arch/arm/mach-s3c6400/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/pwm-clock.h
rename to arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-clock.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-clock.h
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/regs-fb.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-fb.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-gpio-memport.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-gpio.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-gpio.h
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/regs-irq.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-irq.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-modem.h b/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-modem.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-modem.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-srom.h b/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-srom.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-srom.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-sys.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-sys.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h b/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
similarity index 100%
rename from arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
rename to arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
similarity index 87%
rename from arch/arm/plat-s3c64xx/include/plat/s3c6400.h
rename to arch/arm/mach-s3c64xx/include/mach/s3c6400.h
index 11f2e1e..f86958d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6400.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h
+/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -15,9 +15,10 @@
/* Common init code for S3C6400 related SoCs */
extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(unsigned armclk_divlimit);
extern void s3c6400_setup_clocks(void);
+extern void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
+
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
@@ -33,4 +34,3 @@
#define s3c6400_map_io NULL
#define s3c6400_init NULL
#endif
-
diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
similarity index 93%
rename from arch/arm/plat-s3c64xx/include/plat/s3c6410.h
rename to arch/arm/mach-s3c64xx/include/mach/s3c6410.h
index 50dcdd6..24f1141 100644
--- a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+++ b/arch/arm/mach-s3c64xx/include/mach/s3c6410.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h
+/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
similarity index 89%
rename from arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
rename to arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
index 524bdae..9d0c43b 100644
--- a/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
+++ b/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/spi-clocks.h
+/* linux/arch/arm/mach-s3c64xx/include/mach/spi-clocks.h
*
* Copyright (C) 2009 Samsung Electronics Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/system.h
rename to arch/arm/mach-s3c64xx/include/mach/system.h
diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/tick.h
rename to arch/arm/mach-s3c64xx/include/mach/tick.h
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s3c64xx/include/mach/timex.h
index 2a425ed..fb2e8cd 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s3c64xx/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c64xx/include/mach/uncompress.h
similarity index 100%
rename from arch/arm/mach-s3c6400/include/mach/uncompress.h
rename to arch/arm/mach-s3c64xx/include/mach/uncompress.h
diff --git a/arch/arm/plat-s3c/include/mach/vmalloc.h b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
similarity index 86%
copy from arch/arm/plat-s3c/include/mach/vmalloc.h
copy to arch/arm/mach-s3c64xx/include/mach/vmalloc.h
index bfd2ca6..7411ef3 100644
--- a/arch/arm/plat-s3c/include/mach/vmalloc.h
+++ b/arch/arm/mach-s3c64xx/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/mach/vmalloc.h
+/* arch/arm/mach-s3c64xx/include/mach/vmalloc.h
*
* from arch/arm/mach-iop3xx/include/mach/vmalloc.h
*
@@ -9,7 +9,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * S3C2410 vmalloc definition
+ * S3C6400 vmalloc definition
*/
#ifndef __ASM_ARCH_VMALLOC_H
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/mach-s3c64xx/irq-eint.c
similarity index 99%
rename from arch/arm/plat-s3c64xx/irq-eint.c
rename to arch/arm/mach-s3c64xx/irq-eint.c
index ebdf183..5682d6a 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/mach-s3c64xx/irq-eint.c
@@ -22,7 +22,7 @@
#include <asm/hardware/vic.h>
#include <plat/regs-irqtype.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <plat/gpio-cfg.h>
#include <mach/map.h>
diff --git a/arch/arm/plat-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
similarity index 98%
rename from arch/arm/plat-s3c64xx/irq-pm.c
rename to arch/arm/mach-s3c64xx/irq-pm.c
index ca523b5..da1bec6 100644
--- a/arch/arm/plat-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -23,7 +23,7 @@
#include <plat/regs-serial.h>
#include <plat/regs-timer.h>
-#include <plat/regs-gpio.h>
+#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/irq.c
rename to arch/arm/mach-s3c64xx/irq.c
diff --git a/arch/arm/mach-s3c6410/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
similarity index 97%
rename from arch/arm/mach-s3c6410/mach-anw6410.c
rename to arch/arm/mach-s3c64xx/mach-anw6410.c
index 661cca6..4a0bb24 100644
--- a/arch/arm/mach-s3c6410/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-anw6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -45,12 +45,12 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
/* DM9000 */
#define ANW6410_PA_DM9000 (0x18000000)
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
similarity index 99%
rename from arch/arm/mach-s3c6410/mach-hmt.c
rename to arch/arm/mach-s3c64xx/mach-hmt.c
index f05d957..187441a 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -38,7 +38,7 @@
#include <plat/fb.h>
#include <plat/nand.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
similarity index 96%
rename from arch/arm/mach-s3c6410/mach-ncp.c
rename to arch/arm/mach-s3c64xx/mach-ncp.c
index 55e9bbf..bf65747 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ * linux/arch/arm/mach-s3c64xx/mach-ncp.c
*
* Copyright (C) 2008-2009 Samsung Electronics
*
@@ -40,7 +40,7 @@
#include <plat/iic.h>
#include <plat/fb.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6400/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
similarity index 96%
rename from arch/arm/mach-s3c6400/mach-smdk6400.c
rename to arch/arm/mach-s3c64xx/mach-smdk6400.c
index ab19285..f7b1898 100644
--- a/arch/arm/mach-s3c6400/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6400.c
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -31,7 +31,7 @@
#include <plat/regs-serial.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
similarity index 69%
rename from arch/arm/mach-s3c6410/mach-smdk6410.c
rename to arch/arm/mach-s3c64xx/mach-smdk6410.c
index eba345f..2d5afd2 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c
+/* linux/arch/arm/mach-s3c64xx/mach-smdk6410.c
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
+#include <linux/leds.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
@@ -32,6 +33,11 @@
#include <linux/mfd/wm8350/pmic.h>
#endif
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#endif
+
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
@@ -46,15 +52,15 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
-#include <plat/regs-modem.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-srom.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-srom.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
-#include <plat/s3c6410.h>
+#include <mach/s3c6410.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -248,6 +254,7 @@
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
+ &s3c64xx_device_iisv4,
#ifdef CONFIG_REGULATOR
&smdk6410_b_pwr_5v,
@@ -257,6 +264,119 @@
&smdk6410_smsc911x,
};
+#ifdef CONFIG_REGULATOR
+/* ARM core */
+static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = {
+ {
+ .supply = "vddarm",
+ }
+};
+
+/* VDDARM, BUCK1 on J5 */
+static struct regulator_init_data smdk6410_vddarm = {
+ .constraints = {
+ .name = "PVDD_ARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(smdk6410_vddarm_consumers),
+ .consumer_supplies = smdk6410_vddarm_consumers,
+};
+
+/* VDD_INT, BUCK2 on J5 */
+static struct regulator_init_data smdk6410_vddint = {
+ .constraints = {
+ .name = "PVDD_INT",
+ .min_uV = 1000000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+};
+
+/* VDD_HI, LDO3 on J5 */
+static struct regulator_init_data smdk6410_vddhi = {
+ .constraints = {
+ .name = "PVDD_HI",
+ .always_on = 1,
+ },
+};
+
+/* VDD_PLL, LDO2 on J5 */
+static struct regulator_init_data smdk6410_vddpll = {
+ .constraints = {
+ .name = "PVDD_PLL",
+ .always_on = 1,
+ },
+};
+
+/* VDD_UH_MMC, LDO5 on J5 */
+static struct regulator_init_data smdk6410_vdduh_mmc = {
+ .constraints = {
+ .name = "PVDD_UH/PVDD_MMC",
+ .always_on = 1,
+ },
+};
+
+/* VCCM3BT, LDO8 on J5 */
+static struct regulator_init_data smdk6410_vccmc3bt = {
+ .constraints = {
+ .name = "PVCCM3BT",
+ .always_on = 1,
+ },
+};
+
+/* VCCM2MTV, LDO11 on J5 */
+static struct regulator_init_data smdk6410_vccm2mtv = {
+ .constraints = {
+ .name = "PVCCM2MTV",
+ .always_on = 1,
+ },
+};
+
+/* VDD_LCD, LDO12 on J5 */
+static struct regulator_init_data smdk6410_vddlcd = {
+ .constraints = {
+ .name = "PVDD_LCD",
+ .always_on = 1,
+ },
+};
+
+/* VDD_OTGI, LDO9 on J5 */
+static struct regulator_init_data smdk6410_vddotgi = {
+ .constraints = {
+ .name = "PVDD_OTGI",
+ .always_on = 1,
+ },
+};
+
+/* VDD_OTG, LDO14 on J5 */
+static struct regulator_init_data smdk6410_vddotg = {
+ .constraints = {
+ .name = "PVDD_OTG",
+ .always_on = 1,
+ },
+};
+
+/* VDD_ALIVE, LDO15 on J5 */
+static struct regulator_init_data smdk6410_vddalive = {
+ .constraints = {
+ .name = "PVDD_ALIVE",
+ .always_on = 1,
+ },
+};
+
+/* VDD_AUDIO, VLDO_AUDIO on J5 */
+static struct regulator_init_data smdk6410_vddaudio = {
+ .constraints = {
+ .name = "PVDD_AUDIO",
+ .always_on = 1,
+ },
+};
+#endif
+
#ifdef CONFIG_SMDK6410_WM1190_EV1
/* S3C64xx internal logic & PLL */
static struct regulator_init_data wm8350_dcdc1_data = {
@@ -280,7 +400,7 @@
.uV = 1800000,
.mode = REGULATOR_MODE_NORMAL,
.enabled = 1,
- },
+ },
.initial_state = PM_SUSPEND_MEM,
},
};
@@ -305,56 +425,6 @@
.consumer_supplies = wm8350_dcdc4_consumers,
};
-/* ARM core */
-static struct regulator_consumer_supply dcdc6_consumers[] = {
- {
- .supply = "vddarm",
- }
-};
-
-static struct regulator_init_data wm8350_dcdc6_data = {
- .constraints = {
- .name = "PVDD_ARM",
- .min_uV = 1000000,
- .max_uV = 1300000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- },
- .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
- .consumer_supplies = dcdc6_consumers,
-};
-
-/* Alive */
-static struct regulator_init_data wm8350_ldo1_data = {
- .constraints = {
- .name = "PVDD_ALIVE",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .always_on = 1,
- .apply_uV = 1,
- },
-};
-
-/* OTG */
-static struct regulator_init_data wm8350_ldo2_data = {
- .constraints = {
- .name = "PVDD_OTG",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .always_on = 1,
- },
-};
-
-/* LCD */
-static struct regulator_init_data wm8350_ldo3_data = {
- .constraints = {
- .name = "PVDD_LCD",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .always_on = 1,
- },
-};
-
/* OTGi/1190-EV1 HPVDD & AVDD */
static struct regulator_init_data wm8350_ldo4_data = {
.constraints = {
@@ -373,10 +443,10 @@
{ WM8350_DCDC_1, &wm8350_dcdc1_data },
{ WM8350_DCDC_3, &wm8350_dcdc3_data },
{ WM8350_DCDC_4, &wm8350_dcdc4_data },
- { WM8350_DCDC_6, &wm8350_dcdc6_data },
- { WM8350_LDO_1, &wm8350_ldo1_data },
- { WM8350_LDO_2, &wm8350_ldo2_data },
- { WM8350_LDO_3, &wm8350_ldo3_data },
+ { WM8350_DCDC_6, &smdk6410_vddarm },
+ { WM8350_LDO_1, &smdk6410_vddalive },
+ { WM8350_LDO_2, &smdk6410_vddotg },
+ { WM8350_LDO_3, &smdk6410_vddlcd },
{ WM8350_LDO_4, &wm8350_ldo4_data },
};
@@ -403,10 +473,117 @@
};
#endif
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+static struct gpio_led wm1192_pmic_leds[] = {
+ {
+ .name = "PMIC:red:power",
+ .gpio = GPIO_BOARD_START + 3,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static struct gpio_led_platform_data wm1192_pmic_led = {
+ .num_leds = ARRAY_SIZE(wm1192_pmic_leds),
+ .leds = wm1192_pmic_leds,
+};
+
+static struct platform_device wm1192_pmic_led_dev = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &wm1192_pmic_led,
+ },
+};
+
+static int wm1192_pre_init(struct wm831x *wm831x)
+{
+ int ret;
+
+ /* Configure the IRQ line */
+ s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP);
+
+ ret = platform_device_register(&wm1192_pmic_led_dev);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to add PMIC LED: %d\n", ret);
+
+ return 0;
+}
+
+static struct wm831x_backlight_pdata wm1192_backlight_pdata = {
+ .isink = 1,
+ .max_uA = 27554,
+};
+
+static struct regulator_init_data wm1192_dcdc3 = {
+ .constraints = {
+ .name = "PVDD_MEM/PVDD_GPS",
+ .always_on = 1,
+ },
+};
+
+static struct regulator_consumer_supply wm1192_ldo1_consumers[] = {
+ { .supply = "DVDD", .dev_name = "0-001b", }, /* WM8580 */
+};
+
+static struct regulator_init_data wm1192_ldo1 = {
+ .constraints = {
+ .name = "PVDD_LCD/PVDD_EXT",
+ .always_on = 1,
+ },
+ .consumer_supplies = wm1192_ldo1_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(wm1192_ldo1_consumers),
+};
+
+static struct wm831x_status_pdata wm1192_led7_pdata = {
+ .name = "LED7:green:",
+};
+
+static struct wm831x_status_pdata wm1192_led8_pdata = {
+ .name = "LED8:green:",
+};
+
+static struct wm831x_pdata smdk6410_wm1192_pdata = {
+ .pre_init = wm1192_pre_init,
+ .irq_base = IRQ_BOARD_START,
+
+ .backlight = &wm1192_backlight_pdata,
+ .dcdc = {
+ &smdk6410_vddarm, /* DCDC1 */
+ &smdk6410_vddint, /* DCDC2 */
+ &wm1192_dcdc3,
+ },
+ .gpio_base = GPIO_BOARD_START,
+ .ldo = {
+ &wm1192_ldo1, /* LDO1 */
+ &smdk6410_vdduh_mmc, /* LDO2 */
+ NULL, /* LDO3 NC */
+ &smdk6410_vddotgi, /* LDO4 */
+ &smdk6410_vddotg, /* LDO5 */
+ &smdk6410_vddhi, /* LDO6 */
+ &smdk6410_vddaudio, /* LDO7 */
+ &smdk6410_vccm2mtv, /* LDO8 */
+ &smdk6410_vddpll, /* LDO9 */
+ &smdk6410_vccmc3bt, /* LDO10 */
+ &smdk6410_vddalive, /* LDO11 */
+ },
+ .status = {
+ &wm1192_led7_pdata,
+ &wm1192_led8_pdata,
+ },
+};
+#endif
+
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("wm8580", 0x1b), },
+#ifdef CONFIG_SMDK6410_WM1192_EV1
+ { I2C_BOARD_INFO("wm8312", 0x34),
+ .platform_data = &smdk6410_wm1192_pdata,
+ .irq = S3C_EINT(12),
+ },
+#endif
+
#ifdef CONFIG_SMDK6410_WM1190_EV1
{ I2C_BOARD_INFO("wm8350", 0x1a),
.platform_data = &smdk6410_wm8350_pdata,
diff --git a/arch/arm/plat-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
similarity index 95%
rename from arch/arm/plat-s3c64xx/pm.c
rename to arch/arm/mach-s3c64xx/pm.c
index 47632fc..b8ac459 100644
--- a/arch/arm/plat-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -20,14 +20,14 @@
#include <mach/map.h>
#include <plat/pm.h>
-#include <plat/regs-sys.h>
-#include <plat/regs-gpio.h>
-#include <plat/regs-clock.h>
-#include <plat/regs-syscon-power.h>
-#include <plat/regs-gpio-memport.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-syscon-power.h>
+#include <mach/regs-gpio-memport.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <plat/gpio-bank-n.h>
+#include <mach/gpio-bank-n.h>
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
similarity index 86%
rename from arch/arm/mach-s3c6400/s3c6400.c
rename to arch/arm/mach-s3c64xx/s3c6400.c
index d876ee5..707e34e 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/cpu.c
*
* Copyright 2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -30,14 +30,14 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
+#include <mach/s3c6400.h>
void __init s3c6400_map_io(void)
{
@@ -55,10 +55,7 @@
void __init s3c6400_init_clocks(int xtal)
{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c24xx_register_baseclocks(xtal);
- s3c64xx_register_clocks();
- s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+ s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c64xx/s3c6410.c
similarity index 80%
rename from arch/arm/mach-s3c6410/cpu.c
rename to arch/arm/mach-s3c64xx/s3c6410.c
index 522c086..59635d1 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c6410/cpu.c
+/* linux/arch/arm/mach-s3c64xx/s3c6410.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
@@ -31,30 +31,18 @@
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
-#include <plat/regs-clock.h>
+#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* Initial IO mappings */
-
-static struct map_desc s3c6410_iodesc[] __initdata = {
-};
-
-/* s3c6410_map_io
- *
- * register the standard cpu IO areas
-*/
+#include <mach/s3c6400.h>
+#include <mach/s3c6410.h>
void __init s3c6410_map_io(void)
{
- iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc));
-
/* initialise device information early */
s3c6410_default_sdhci0();
s3c6410_default_sdhci1();
@@ -70,9 +58,7 @@
void __init s3c6410_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c24xx_register_baseclocks(xtal);
- s3c64xx_register_clocks();
- s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
+ s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}
diff --git a/arch/arm/plat-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-fb-24bpp.c
rename to arch/arm/mach-s3c64xx/setup-fb-24bpp.c
diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
similarity index 96%
rename from arch/arm/plat-s3c64xx/setup-i2c0.c
rename to arch/arm/mach-s3c64xx/setup-i2c0.c
index 3644807..d1b11e6 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,8 +18,8 @@
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
similarity index 96%
rename from arch/arm/plat-s3c64xx/setup-i2c1.c
rename to arch/arm/mach-s3c64xx/setup-i2c1.c
index bbe229b..2dce57d 100644
--- a/arch/arm/plat-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,8 +18,8 @@
struct platform_device; /* don't need the contents */
#include <mach/gpio.h>
+#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
-#include <plat/gpio-bank-b.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
similarity index 100%
rename from arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
rename to arch/arm/mach-s3c64xx/setup-sdhci-gpio.c
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
similarity index 78%
rename from arch/arm/mach-s3c6400/setup-sdhci.c
rename to arch/arm/mach-s3c64xx/setup-sdhci.c
index 1039937..1a94203 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -1,11 +1,11 @@
-/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
*
* Copyright 2008 Simtec Electronics
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
- * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -26,7 +26,7 @@
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-char *s3c6400_hsmmc_clksrcs[4] = {
+char *s3c64xx_hsmmc_clksrcs[4] = {
[0] = "hsmmc",
[1] = "hsmmc",
[2] = "mmc_bus",
@@ -61,3 +61,12 @@
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
+void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+ s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
+}
diff --git a/arch/arm/plat-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
similarity index 97%
rename from arch/arm/plat-s3c64xx/sleep.S
rename to arch/arm/mach-s3c64xx/sleep.S
index 8e71fe9..b2ef443 100644
--- a/arch/arm/plat-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -1,4 +1,4 @@
-/* linux/0arch/arm/plat-s3c64xx/sleep.S
+/* linux/arch/arm/plat-s3c64xx/sleep.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
@@ -19,8 +19,8 @@
#undef S3C64XX_VA_GPIO
#define S3C64XX_VA_GPIO (0x0)
-#include <plat/regs-gpio.h>
-#include <plat/gpio-bank-n.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio-bank-n.h>
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig
index 3aa2462..4c29ff8 100644
--- a/arch/arm/mach-s5p6440/Kconfig
+++ b/arch/arm/mach-s5p6440/Kconfig
@@ -9,8 +9,6 @@
config CPU_S5P6440
bool
- select CPU_S5P6440_INIT
- select CPU_S5P6440_CLOCK
help
Enable S5P6440 CPU support
diff --git a/arch/arm/mach-s5p6440/Makefile b/arch/arm/mach-s5p6440/Makefile
index a79b130..1ad894b 100644
--- a/arch/arm/mach-s5p6440/Makefile
+++ b/arch/arm/mach-s5p6440/Makefile
@@ -12,7 +12,7 @@
# Core support for S5P6440 system
-obj-$(CONFIG_CPU_S5P6440) += cpu.o s5p6440-gpio.o
+obj-$(CONFIG_CPU_S5P6440) += cpu.o init.o clock.o gpio.o
# machine support
diff --git a/arch/arm/plat-s5p/s5p6440-clock.c b/arch/arm/mach-s5p6440/clock.c
similarity index 99%
rename from arch/arm/plat-s5p/s5p6440-clock.c
rename to arch/arm/mach-s5p6440/clock.c
index 2f412f8..b2672e1 100644
--- a/arch/arm/plat-s5p/s5p6440-clock.c
+++ b/arch/arm/mach-s5p6440/clock.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/s5p6440-clock.c
+/* linux/arch/arm/mach-s5p6440/clock.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
diff --git a/arch/arm/mach-s5p6440/s5p6440-gpio.c b/arch/arm/mach-s5p6440/gpio.c
similarity index 99%
rename from arch/arm/mach-s5p6440/s5p6440-gpio.c
rename to arch/arm/mach-s5p6440/gpio.c
index 742264c..b0ea741 100644
--- a/arch/arm/mach-s5p6440/s5p6440-gpio.c
+++ b/arch/arm/mach-s5p6440/gpio.c
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s5p6440/s5p6440-gpio.c
+/* arch/arm/mach-s5p6440/gpio.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
index f3a5d16..48cdb0d 100644
--- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
@@ -22,8 +22,8 @@
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
- ldreq \rx, = S5P_PA_UART
- ldrne \rx, = (S5P_VA_UART + S5P_PA_UART & 0xfffff)
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s5p6440/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s5p6440/include/mach/io.h
index f6a5363..fa2d69c 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s5p6440/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s5p6440/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S3C64XX based
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/mach-s5p6440/include/mach/map.h b/arch/arm/mach-s5p6440/include/mach/map.h
index 4a73e73..8924e5a 100644
--- a/arch/arm/mach-s5p6440/include/mach/map.h
+++ b/arch/arm/mach-s5p6440/include/mach/map.h
@@ -14,94 +14,55 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s5p.h>
-/* Chip ID */
#define S5P6440_PA_CHIPID (0xE0000000)
#define S5P_PA_CHIPID S5P6440_PA_CHIPID
-#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
-/* SYSCON */
#define S5P6440_PA_SYSCON (0xE0100000)
-#define S5P_PA_SYSCON S5P6440_PA_SYSCON
-#define S5P_VA_SYSCON S3C_VA_SYS
-
#define S5P6440_PA_CLK (S5P6440_PA_SYSCON + 0x0)
-#define S5P_PA_CLK S5P6440_PA_CLK
-#define S5P_VA_CLK (S5P_VA_SYSCON + 0x0)
+#define S5P_PA_SYSCON S5P6440_PA_SYSCON
-/* GPIO */
#define S5P6440_PA_GPIO (0xE0308000)
#define S5P_PA_GPIO S5P6440_PA_GPIO
-#define S5P_VA_GPIO S3C_ADDR(0x00500000)
-/* VIC0 */
#define S5P6440_PA_VIC0 (0xE4000000)
#define S5P_PA_VIC0 S5P6440_PA_VIC0
-#define S5P_VA_VIC0 (S3C_VA_IRQ + 0x0)
-#define VA_VIC0 S5P_VA_VIC0
-/* VIC1 */
#define S5P6440_PA_VIC1 (0xE4100000)
#define S5P_PA_VIC1 S5P6440_PA_VIC1
-#define S5P_VA_VIC1 (S3C_VA_IRQ + 0x10000)
-#define VA_VIC1 S5P_VA_VIC1
-/* Timer */
#define S5P6440_PA_TIMER (0xEA000000)
#define S5P_PA_TIMER S5P6440_PA_TIMER
-#define S5P_VA_TIMER S3C_VA_TIMER
-/* RTC */
#define S5P6440_PA_RTC (0xEA100000)
#define S5P_PA_RTC S5P6440_PA_RTC
-#define S5P_VA_RTC S3C_ADDR(0x00600000)
-/* WDT */
#define S5P6440_PA_WDT (0xEA200000)
#define S5P_PA_WDT S5P6440_PA_WDT
-#define S5p_VA_WDT S3C_VA_WATCHDOG
-/* UART */
#define S5P6440_PA_UART (0xEC000000)
-#define S5P_PA_UART S5P6440_PA_UART
-#define S5P_VA_UART S3C_VA_UART
-/* HS USB OtG */
+#define S5P_PA_UART0 (S5P6440_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5P6440_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5P6440_PA_UART + 0x800)
+#define S5P_PA_UART3 (S5P6440_PA_UART + 0xC00)
+
+#define S5P_SZ_UART SZ_256
+
+#define S5P6440_PA_IIC0 (0xEC104000)
+
#define S5P6440_PA_HSOTG (0xED100000)
-/* HSMMC */
#define S5P6440_PA_HSMMC0 (0xED800000)
#define S5P6440_PA_HSMMC1 (0xED900000)
#define S5P6440_PA_HSMMC2 (0xEDA00000)
-#define S5P_PA_UART0 (S5P_PA_UART + 0x0)
-#define S5P_PA_UART1 (S5P_PA_UART + 0x400)
-#define S5P_PA_UART2 (S5P_PA_UART + 0x800)
-#define S5P_PA_UART3 (S5P_PA_UART + 0xC00)
-#define S5P_UART_OFFSET (0x400)
-
-#define S5P_VA_UARTx(x) (S5P_VA_UART + (S5P_PA_UART & 0xfffff) \
- + ((x) * S5P_UART_OFFSET))
-
-#define S5P_VA_UART0 S5P_VA_UARTx(0)
-#define S5P_VA_UART1 S5P_VA_UARTx(1)
-#define S5P_VA_UART2 S5P_VA_UARTx(2)
-#define S5P_VA_UART3 S5P_VA_UARTx(3)
-#define S5P_SZ_UART SZ_256
-
-/* I2C */
-#define S5P6440_PA_IIC0 (0xEC104000)
-#define S5P_PA_IIC0 S5P6440_PA_IIC0
-#define S5p_VA_IIC0 S3C_ADDR(0x00700000)
-
-/* SDRAM */
#define S5P6440_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5P6440_PA_SDRAM
/* compatibiltiy defines. */
-#define S3C_PA_UART S5P_PA_UART
-#define S3C_UART_OFFSET S5P_UART_OFFSET
-#define S3C_PA_TIMER S5P_PA_TIMER
-#define S3C_PA_IIC S5P_PA_IIC0
+#define S3C_PA_UART S5P6440_PA_UART
+#define S3C_PA_IIC S5P6440_PA_IIC0
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/regs-clock.h b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
index b7af283..c783ecc 100644
--- a/arch/arm/mach-s5p6440/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5p6440/include/mach/regs-clock.h
@@ -15,7 +15,7 @@
#include <mach/map.h>
-#define S5P_CLKREG(x) (S5P_VA_CLK + (x))
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
#define S5P_APLL_LOCK S5P_CLKREG(0x00)
#define S5P_MPLL_LOCK S5P_CLKREG(0x04)
diff --git a/arch/arm/mach-s5p6440/include/mach/tick.h b/arch/arm/mach-s5p6440/include/mach/tick.h
index 0815aeb..2f25c7f 100644
--- a/arch/arm/mach-s5p6440/include/mach/tick.h
+++ b/arch/arm/mach-s5p6440/include/mach/tick.h
@@ -15,7 +15,7 @@
static inline u32 s3c24xx_ostimer_pending(void)
{
- u32 pend = __raw_readl(S5P_VA_VIC0 + VIC_RAW_STATUS);
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
}
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5p6440/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5p6440/include/mach/timex.h
index 2a425ed..fb2e8cd 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5p6440/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s3c64xx/include/mach/timex.h
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6440/include/mach/vmalloc.h b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
new file mode 100644
index 0000000..16df257
--- /dev/null
+++ b/arch/arm/mach-s5p6440/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6440/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/plat-s5p/s5p6440-init.c b/arch/arm/mach-s5p6440/init.c
similarity index 93%
rename from arch/arm/plat-s5p/s5p6440-init.c
rename to arch/arm/mach-s5p6440/init.c
index 9017825..a1f3727 100644
--- a/arch/arm/plat-s5p/s5p6440-init.c
+++ b/arch/arm/mach-s5p6440/init.c
@@ -1,8 +1,10 @@
-/* linux/arch/arm/plat-s5p/s5p6440-init.c
+/* linux/arch/arm/mach-s5p6440/init.c
*
* Copyright (c) 2009 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
+ * S5P6440 - Init support
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
index 760ea54..3ae88f2 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -100,8 +100,8 @@
MACHINE_START(SMDK6440, "SMDK6440")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .phys_io = S5P_PA_UART & 0xfff00000,
- .io_pg_offst = (((u32)S5P_VA_UART) >> 18) & 0xfffc,
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = s5p6440_init_irq,
diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig
new file mode 100644
index 0000000..4f3f6de
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Kconfig
@@ -0,0 +1,24 @@
+# arch/arm/mach-s5p6442/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5P6442
+
+if ARCH_S5P6442
+
+config CPU_S5P6442
+ bool
+ select PLAT_S5P
+ help
+ Enable S5P6442 CPU support
+
+config MACH_SMDK6442
+ bool "SMDK6442"
+ select CPU_S5P6442
+ help
+ Machine support for Samsung SMDK6442
+
+endif
diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile
new file mode 100644
index 0000000..dde39a6
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile
@@ -0,0 +1,19 @@
+# arch/arm/mach-s5p6442/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5P6442 system
+
+obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o
diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5p6442/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c
new file mode 100644
index 0000000..3aadbf4
--- /dev/null
+++ b/arch/arm/mach-s5p6442/clock.c
@@ -0,0 +1,396 @@
+/* linux/arch/arm/mach-s5p6442/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5p6442.h>
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+/* Possible clock sources for ARM Mux */
+static struct clk *clk_src_arm_list[] = {
+ [1] = &clk_mout_apll.clk,
+ [2] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_arm = {
+ .sources = clk_src_arm_list,
+ .nr_sources = ARRAY_SIZE(clk_src_arm_list),
+};
+
+static struct clksrc_clk clk_mout_arm = {
+ .clk = {
+ .name = "mout_arm",
+ .id = -1,
+ },
+ .sources = &clk_src_arm,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+};
+
+static struct clk clk_dout_a2m = {
+ .name = "dout_a2m",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+};
+
+/* Possible clock sources for D0 Mux */
+static struct clk *clk_src_d0_list[] = {
+ [1] = &clk_mout_mpll.clk,
+ [2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d0 = {
+ .sources = clk_src_d0_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d0_list),
+};
+
+static struct clksrc_clk clk_mout_d0 = {
+ .clk = {
+ .name = "mout_d0",
+ .id = -1,
+ },
+ .sources = &clk_src_d0,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 },
+};
+
+static struct clk clk_dout_apll = {
+ .name = "dout_apll",
+ .id = -1,
+ .parent = &clk_mout_arm.clk,
+};
+
+/* Possible clock sources for D0SYNC Mux */
+static struct clk *clk_src_d0sync_list[] = {
+ [1] = &clk_mout_d0.clk,
+ [2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d0sync = {
+ .sources = clk_src_d0sync_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d0sync_list),
+};
+
+static struct clksrc_clk clk_mout_d0sync = {
+ .clk = {
+ .name = "mout_d0sync",
+ .id = -1,
+ },
+ .sources = &clk_src_d0sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+};
+
+/* Possible clock sources for D1 Mux */
+static struct clk *clk_src_d1_list[] = {
+ [1] = &clk_mout_mpll.clk,
+ [2] = &clk_dout_a2m,
+};
+
+static struct clksrc_sources clk_src_d1 = {
+ .sources = clk_src_d1_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d1_list),
+};
+
+static struct clksrc_clk clk_mout_d1 = {
+ .clk = {
+ .name = "mout_d1",
+ .id = -1,
+ },
+ .sources = &clk_src_d1,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 },
+};
+
+/* Possible clock sources for D1SYNC Mux */
+static struct clk *clk_src_d1sync_list[] = {
+ [1] = &clk_mout_d1.clk,
+ [2] = &clk_dout_apll,
+};
+
+static struct clksrc_sources clk_src_d1sync = {
+ .sources = clk_src_d1sync_list,
+ .nr_sources = ARRAY_SIZE(clk_src_d1sync_list),
+};
+
+static struct clksrc_clk clk_mout_d1sync = {
+ .clk = {
+ .name = "mout_d1sync",
+ .id = -1,
+ },
+ .sources = &clk_src_d1sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+};
+
+static struct clk clk_hclkd0 = {
+ .name = "hclkd0",
+ .id = -1,
+ .parent = &clk_mout_d0sync.clk,
+};
+
+static struct clk clk_hclkd1 = {
+ .name = "hclkd1",
+ .id = -1,
+ .parent = &clk_mout_d1sync.clk,
+};
+
+static struct clk clk_pclkd0 = {
+ .name = "pclkd0",
+ .id = -1,
+ .parent = &clk_hclkd0,
+};
+
+static struct clk clk_pclkd1 = {
+ .name = "pclkd1",
+ .id = -1,
+ .parent = &clk_hclkd1,
+};
+
+int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "dout_a2m",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 },
+ }, {
+ .clk = {
+ .name = "dout_apll",
+ .id = -1,
+ .parent = &clk_mout_arm.clk,
+ },
+ .sources = &clk_src_arm,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 },
+ }, {
+ .clk = {
+ .name = "hclkd1",
+ .id = -1,
+ .parent = &clk_mout_d1sync.clk,
+ },
+ .sources = &clk_src_d1sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "hclkd0",
+ .id = -1,
+ .parent = &clk_mout_d0sync.clk,
+ },
+ .sources = &clk_src_d0sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "pclkd0",
+ .id = -1,
+ .parent = &clk_hclkd0,
+ },
+ .sources = &clk_src_d0sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 },
+ }, {
+ .clk = {
+ .name = "pclkd1",
+ .id = -1,
+ .parent = &clk_hclkd1,
+ },
+ .sources = &clk_src_d1sync,
+ .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 },
+ .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 },
+ }
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_mpll,
+ &clk_mout_epll,
+ &clk_mout_arm,
+ &clk_mout_d0,
+ &clk_mout_d0sync,
+ &clk_mout_d1,
+ &clk_mout_d1sync,
+};
+
+void __init_or_cpufreq s5p6442_setup_clocks(void)
+{
+ struct clk *pclkd0_clk;
+ struct clk *pclkd1_clk;
+
+ unsigned long xtal;
+ unsigned long arm;
+ unsigned long hclkd0 = 0;
+ unsigned long hclkd1 = 0;
+ unsigned long pclkd0 = 0;
+ unsigned long pclkd1 = 0;
+
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal = clk_get_rate(&clk_xtal);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+ epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+ printk(KERN_INFO "S5P6440: PLL settings, A=%ld, M=%ld, E=%ld",
+ apll, mpll, epll);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s3c_set_clksrc(init_parents[ptr], true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+
+ arm = clk_get_rate(&clk_dout_apll);
+ hclkd0 = clk_get_rate(&clk_hclkd0);
+ hclkd1 = clk_get_rate(&clk_hclkd1);
+
+ pclkd0_clk = clk_get(NULL, "pclkd0");
+ BUG_ON(IS_ERR(pclkd0_clk));
+
+ pclkd0 = clk_get_rate(pclkd0_clk);
+ clk_put(pclkd0_clk);
+
+ pclkd1_clk = clk_get(NULL, "pclkd1");
+ BUG_ON(IS_ERR(pclkd1_clk));
+
+ pclkd1 = clk_get_rate(pclkd1_clk);
+ clk_put(pclkd1_clk);
+
+ printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n",
+ hclkd0, hclkd1, pclkd0, pclkd1);
+
+ /* For backward compatibility */
+ clk_f.rate = arm;
+ clk_h.rate = hclkd1;
+ clk_p.rate = pclkd1;
+
+ clk_pclkd0.rate = pclkd0;
+ clk_pclkd1.rate = pclkd1;
+}
+
+static struct clk init_clocks[] = {
+ {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<17),
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<18),
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<19),
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_pclkd1,
+ .enable = s5p6442_clk_ip3_ctrl,
+ .ctrlbit = (1<<23),
+ },
+};
+
+static struct clk *clks[] __initdata = {
+ &clk_ext,
+ &clk_epll,
+ &clk_mout_apll.clk,
+ &clk_mout_mpll.clk,
+ &clk_mout_epll.clk,
+ &clk_mout_d0.clk,
+ &clk_mout_d0sync.clk,
+ &clk_mout_d1.clk,
+ &clk_mout_d1sync.clk,
+ &clk_hclkd0,
+ &clk_pclkd0,
+ &clk_hclkd1,
+ &clk_pclkd1,
+};
+
+void __init s5p6442_register_clocks(void)
+{
+ s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c
new file mode 100644
index 0000000..bc2524d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/cpu.c
@@ -0,0 +1,121 @@
+/* linux/arch/arm/mach-s5p6442/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/regs-serial.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5p6442.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5p6442_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC2,
+ .pfn = __phys_to_pfn(S5P6442_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void s5p6442_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+/* s5p6442_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5p6442_map_io(void)
+{
+ iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc));
+}
+
+void __init s5p6442_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5p6442_register_clocks();
+ s5p6442_setup_clocks();
+}
+
+void __init s5p6442_init_irq(void)
+{
+ /* S5P6442 supports 3 VIC */
+ u32 vic[3];
+
+ /* VIC0, VIC1, and VIC2: some interrupt reserved */
+ vic[0] = 0x7fefffff;
+ vic[1] = 0X7f389c81;
+ vic[2] = 0X1bbbcfff;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5p6442_sysclass = {
+ .name = "s5p6442-core",
+};
+
+static struct sys_device s5p6442_sysdev = {
+ .cls = &s5p6442_sysclass,
+};
+
+static int __init s5p6442_core_init(void)
+{
+ return sysdev_class_register(&s5p6442_sysclass);
+}
+
+core_initcall(s5p6442_core_init);
+
+int __init s5p6442_init(void)
+{
+ printk(KERN_INFO "S5P6442: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5p6442_idle;
+
+ return sysdev_register(&s5p6442_sysdev);
+}
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
new file mode 100644
index 0000000..1aae691
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -0,0 +1,36 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
new file mode 100644
index 0000000..6d574ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/entry-macro.S
@@ -0,0 +1,48 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5P6442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S5P_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h
new file mode 100644
index 0000000..b8715df
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/gpio.h
@@ -0,0 +1,123 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5P6442_GPIO_A0_NR (8)
+#define S5P6442_GPIO_A1_NR (2)
+#define S5P6442_GPIO_B_NR (4)
+#define S5P6442_GPIO_C0_NR (5)
+#define S5P6442_GPIO_C1_NR (5)
+#define S5P6442_GPIO_D0_NR (2)
+#define S5P6442_GPIO_D1_NR (6)
+#define S5P6442_GPIO_E0_NR (8)
+#define S5P6442_GPIO_E1_NR (5)
+#define S5P6442_GPIO_F0_NR (8)
+#define S5P6442_GPIO_F1_NR (8)
+#define S5P6442_GPIO_F2_NR (8)
+#define S5P6442_GPIO_F3_NR (6)
+#define S5P6442_GPIO_G0_NR (7)
+#define S5P6442_GPIO_G1_NR (7)
+#define S5P6442_GPIO_G2_NR (7)
+#define S5P6442_GPIO_H0_NR (8)
+#define S5P6442_GPIO_H1_NR (8)
+#define S5P6442_GPIO_H2_NR (8)
+#define S5P6442_GPIO_H3_NR (8)
+#define S5P6442_GPIO_J0_NR (8)
+#define S5P6442_GPIO_J1_NR (6)
+#define S5P6442_GPIO_J2_NR (8)
+#define S5P6442_GPIO_J3_NR (8)
+#define S5P6442_GPIO_J4_NR (5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5P6442_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5P6442_GPIO_A0_START = 0,
+ S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0),
+ S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1),
+ S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B),
+ S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0),
+ S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1),
+ S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0),
+ S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1),
+ S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0),
+ S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1),
+ S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0),
+ S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1),
+ S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2),
+ S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3),
+ S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0),
+ S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1),
+ S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2),
+ S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0),
+ S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1),
+ S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2),
+ S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3),
+ S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0),
+ S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1),
+ S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2),
+ S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3),
+};
+
+/* S5P6442 GPIO number definitions. */
+#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr))
+#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr))
+#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr))
+#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr))
+#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr))
+#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr))
+#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr))
+#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr))
+#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr))
+#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr))
+#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr))
+#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr))
+#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr))
+#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr))
+#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr))
+#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr))
+#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr))
+#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr))
+#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr))
+#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr))
+#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr))
+#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr))
+#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr))
+#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr))
+#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr))
+
+/* the end of the S5P6442 specific gpios */
+#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END S5P6442_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h
new file mode 100644
index 0000000..8cd7b67
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h
new file mode 100644
index 0000000..5d2195a
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/io.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Default IO routines for S5P6442
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif
diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h
new file mode 100644
index 0000000..da66580
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0 */
+#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
+#define IRQ_BATF S5P_IRQ_VIC0(17)
+#define IRQ_MDMA S5P_IRQ_VIC0(18)
+#define IRQ_PDMA S5P_IRQ_VIC0(19)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
+#define IRQ_WDT S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
+
+/* VIC1 */
+#define IRQ_nPMUIRQ S5P_IRQ_VIC1(0)
+#define IRQ_ONENAND S5P_IRQ_VIC1(7)
+#define IRQ_UART0 S5P_IRQ_VIC1(10)
+#define IRQ_UART1 S5P_IRQ_VIC1(11)
+#define IRQ_UART2 S5P_IRQ_VIC1(12)
+#define IRQ_SPI0 S5P_IRQ_VIC1(15)
+#define IRQ_IIC S5P_IRQ_VIC1(19)
+#define IRQ_IIC1 S5P_IRQ_VIC1(20)
+#define IRQ_IIC2 S5P_IRQ_VIC1(21)
+#define IRQ_OTG S5P_IRQ_VIC1(24)
+#define IRQ_MSM S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
+#define IRQ_COMMRX S5P_IRQ_VIC1(29)
+#define IRQ_COMMTX S5P_IRQ_VIC1(30)
+
+/* VIC2 */
+#define IRQ_LCD0 S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
+#define IRQ_JPEG S5P_IRQ_VIC2(8)
+#define IRQ_3D S5P_IRQ_VIC2(10)
+#define IRQ_Mixer S5P_IRQ_VIC2(11)
+#define IRQ_MFC S5P_IRQ_VIC2(14)
+#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 S5P_IRQ_VIC2(17)
+#define IRQ_RP S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 S5P_IRQ_VIC2(21)
+#define IRQ_ADC S5P_IRQ_VIC2(23)
+#define IRQ_PENDN S5P_IRQ_VIC2(24)
+#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
+#define IRQ_SSS_INT S5P_IRQ_VIC2(27)
+#define IRQ_SSS_HASH S5P_IRQ_VIC2(28)
+#define IRQ_VIC_END S5P_IRQ_VIC2(31)
+
+#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
+
+#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \
+ (S5P_IRQ_EINT_BASE + (x)-16))
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT(31) + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h
new file mode 100644
index 0000000..685277d
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/map.h
@@ -0,0 +1,58 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5P6442_PA_CHIPID (0xE0000000)
+#define S5P_PA_CHIPID S5P6442_PA_CHIPID
+
+#define S5P6442_PA_SYSCON (0xE0100000)
+#define S5P_PA_SYSCON S5P6442_PA_SYSCON
+
+#define S5P6442_PA_GPIO (0xE0200000)
+#define S5P_PA_GPIO S5P6442_PA_GPIO
+
+#define S5P6442_PA_VIC0 (0xE4000000)
+#define S5P_PA_VIC0 S5P6442_PA_VIC0
+
+#define S5P6442_PA_VIC1 (0xE4100000)
+#define S5P_PA_VIC1 S5P6442_PA_VIC1
+
+#define S5P6442_PA_VIC2 (0xE4200000)
+#define S5P_PA_VIC2 S5P6442_PA_VIC2
+
+#define S5P6442_PA_TIMER (0xEA000000)
+#define S5P_PA_TIMER S5P6442_PA_TIMER
+
+#define S5P6442_PA_SYSTIMER (0xEA100000)
+
+#define S5P6442_PA_UART (0xEC000000)
+
+#define S5P_PA_UART0 (S5P6442_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5P6442_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5P6442_PA_UART + 0x800)
+#define S5P_SZ_UART SZ_256
+
+#define S5P6442_PA_IIC0 (0xEC100000)
+
+#define S5P6442_PA_SDRAM (0x20000000)
+#define S5P_PA_SDRAM S5P6442_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART S5P6442_PA_UART
+#define S3C_PA_IIC S5P6442_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h
new file mode 100644
index 0000000..9ddd877
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+#define CONSISTENT_DMA_SIZE SZ_8M
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
new file mode 100644
index 0000000..15e8525
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5P6442 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
new file mode 100644
index 0000000..d8360b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-clock.h
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON S5P_CLKREG(0x100)
+#define S5P_MPLL_CON S5P_CLKREG(0x108)
+#define S5P_EPLL_CON S5P_CLKREG(0x110)
+#define S5P_VPLL_CON S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4 S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5 S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6 S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
+
+#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
+
+/* CLK_OUT */
+#define S5P_CLK_OUT_SHIFT (12)
+#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT)
+#define S5P_CLK_OUT S5P_CLKREG(0x500)
+
+#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000)
+#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004)
+
+#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100)
+#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104)
+
+#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
+
+/* Register Bit definition */
+#define S5P_EPLL_EN (1<<31)
+#define S5P_EPLL_MASK 0xffffffff
+#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT (0)
+#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT (4)
+#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_D0CLK_SHIFT (16)
+#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT)
+#define S5P_CLKDIV0_P0CLK_SHIFT (20)
+#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT)
+#define S5P_CLKDIV0_D1CLK_SHIFT (24)
+#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT)
+#define S5P_CLKDIV0_P1CLK_SHIFT (28)
+#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT)
+
+/* Clock MUX status Registers */
+#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0)
+#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4)
+#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8)
+#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12)
+#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16)
+#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20)
+#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT)
+#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24)
+#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT)
+#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24)
+#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT)
+#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28)
+#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
new file mode 100644
index 0000000..73782b5
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h
new file mode 100644
index 0000000..8bcd8ed
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h
new file mode 100644
index 0000000..e1d4cab
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/tick.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5P6442 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h
similarity index 83%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5p6442/include/mach/timex.h
index 2a425ed..ff8f2fc 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5p6442/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s5p6442/include/mach/timex.h
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S5P6442 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h
new file mode 100644
index 0000000..5ac7cbe
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P6442 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
new file mode 100644
index 0000000..be33336
--- /dev/null
+++ b/arch/arm/mach-s5p6442/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S5P6442 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c
new file mode 100644
index 0000000..1874bdb
--- /dev/null
+++ b/arch/arm/mach-s5p6442/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5p6442/s5p6442-init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5p6442.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = {
+ [0] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5p6442_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
new file mode 100644
index 0000000..0d63371
--- /dev/null
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5p6442.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5P6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5P6442_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5P6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5P6442_UCON_DEFAULT,
+ .ulcon = S5P6442_ULCON_DEFAULT,
+ .ufcon = S5P6442_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5P6442_UCON_DEFAULT,
+ .ulcon = S5P6442_ULCON_DEFAULT,
+ .ufcon = S5P6442_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5P6442_UCON_DEFAULT,
+ .ulcon = S5P6442_ULCON_DEFAULT,
+ .ufcon = S5P6442_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *smdk6442_devices[] __initdata = {
+};
+
+static void __init smdk6442_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs));
+}
+
+static void __init smdk6442_machine_init(void)
+{
+ platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));
+}
+
+MACHINE_START(SMDK6442, "SMDK6442")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5p6442_init_irq,
+ .map_io = smdk6442_map_io,
+ .init_machine = smdk6442_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/mach-s5pc100/include/mach/io.h
similarity index 72%
copy from arch/arm/plat-s3c/include/mach/io.h
copy to arch/arm/mach-s5pc100/include/mach/io.h
index f6a5363..819acf5 100644
--- a/arch/arm/plat-s3c/include/mach/io.h
+++ b/arch/arm/mach-s5pc100/include/mach/io.h
@@ -1,9 +1,9 @@
-/* arch/arm/plat-s3c/include/mach/io.h
+/* arch/arm/mach-s5pc100/include/mach/io.h
*
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben-linux@fluff.org>
*
- * Default IO routines for plat-s3c based systems, such as S3C24A0
+ * Default IO routines for S5PC100 systems
*/
#ifndef __ASM_ARM_ARCH_IO_H
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
similarity index 89%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5pc100/include/mach/timex.h
index 2a425ed..47ffb17 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5pc100/include/mach/timex.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* arch/arm/mach-s5pc100/include/mach/timex.h
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * S3C6400 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -19,8 +19,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/vmalloc.h b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
new file mode 100644
index 0000000..61b9515
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/vmalloc.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-s5pc100/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C6400 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
new file mode 100644
index 0000000..af33a1a
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -0,0 +1,40 @@
+# arch/arm/mach-s5pv210/Kconfig
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PV210/S5PC110
+
+if ARCH_S5PV210
+
+config CPU_S5PV210
+ bool
+ select PLAT_S5P
+ help
+ Enable S5PV210 CPU support
+
+choice
+ prompt "Select machine type"
+ depends on ARCH_S5PV210
+ default MACH_SMDKV210
+
+config MACH_SMDKV210
+ bool "SMDKV210"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung SMDKV210
+
+config MACH_SMDKC110
+ bool "SMDKC110"
+ select CPU_S5PV210
+ select ARCH_SPARSEMEM_ENABLE
+ help
+ Machine support for Samsung SMDKC110
+ S5PC110(MCP) is one of package option of S5PV210
+
+endchoice
+
+endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
new file mode 100644
index 0000000..8ebf51c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -0,0 +1,20 @@
+# arch/arm/mach-s5pv210/Makefile
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# http://www.samsung.com/
+#
+# Licensed under GPLv2
+
+obj-y :=
+obj-m :=
+obj-n :=
+obj- :=
+
+# Core support for S5PV210 system
+
+obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o
+
+# machine support
+
+obj-$(CONFIG_MACH_SMDKV210) += mach-smdkv210.o
+obj-$(CONFIG_MACH_SMDKC110) += mach-smdkc110.o
diff --git a/arch/arm/mach-s5pv210/Makefile.boot b/arch/arm/mach-s5pv210/Makefile.boot
new file mode 100644
index 0000000..ff90aa1
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile.boot
@@ -0,0 +1,2 @@
+ zreladdr-y := 0x20008000
+params_phys-y := 0x20000100
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
new file mode 100644
index 0000000..ccccae2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -0,0 +1,454 @@
+/* linux/arch/arm/mach-s5pv210/clock.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+#include <mach/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/s5pv210.h>
+
+static int s5pv210_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
+static int s5pv210_clk_ip1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP1, clk, enable);
+}
+
+static int s5pv210_clk_ip2_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP2, clk, enable);
+}
+
+static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
+}
+
+static struct clk clk_h200 = {
+ .name = "hclk200",
+ .id = -1,
+};
+
+static struct clk clk_h100 = {
+ .name = "hclk100",
+ .id = -1,
+};
+
+static struct clk clk_h166 = {
+ .name = "hclk166",
+ .id = -1,
+};
+
+static struct clk clk_h133 = {
+ .name = "hclk133",
+ .id = -1,
+};
+
+static struct clk clk_p100 = {
+ .name = "pclk100",
+ .id = -1,
+};
+
+static struct clk clk_p83 = {
+ .name = "pclk83",
+ .id = -1,
+};
+
+static struct clk clk_p66 = {
+ .name = "pclk66",
+ .id = -1,
+};
+
+static struct clk *sys_clks[] = {
+ &clk_h200,
+ &clk_h100,
+ &clk_h166,
+ &clk_h133,
+ &clk_p100,
+ &clk_p83,
+ &clk_p66
+};
+
+static struct clk init_clocks_disable[] = {
+ {
+ .name = "rot",
+ .id = -1,
+ .parent = &clk_h166,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1<<29),
+ }, {
+ .name = "otg",
+ .id = -1,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "usb-host",
+ .id = -1,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<17),
+ }, {
+ .name = "lcd",
+ .id = -1,
+ .parent = &clk_h166,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<0),
+ }, {
+ .name = "cfcon",
+ .id = 0,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip1_ctrl,
+ .ctrlbit = (1<<25),
+ }, {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "hsmmc",
+ .id = 1,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<17),
+ }, {
+ .name = "hsmmc",
+ .id = 2,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<18),
+ }, {
+ .name = "hsmmc",
+ .id = 3,
+ .parent = &clk_h133,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<19),
+ }, {
+ .name = "systimer",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<16),
+ }, {
+ .name = "watchdog",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<22),
+ }, {
+ .name = "rtc",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<15),
+ }, {
+ .name = "i2c",
+ .id = 0,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<7),
+ }, {
+ .name = "i2c",
+ .id = 1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<8),
+ }, {
+ .name = "i2c",
+ .id = 2,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<9),
+ }, {
+ .name = "spi",
+ .id = 0,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<12),
+ }, {
+ .name = "spi",
+ .id = 1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<13),
+ }, {
+ .name = "spi",
+ .id = 2,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<14),
+ }, {
+ .name = "timers",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<23),
+ }, {
+ .name = "adc",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<24),
+ }, {
+ .name = "keypad",
+ .id = -1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<21),
+ }, {
+ .name = "i2s_v50",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<4),
+ }, {
+ .name = "i2s_v32",
+ .id = 0,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<4),
+ }, {
+ .name = "i2s_v32",
+ .id = 1,
+ .parent = &clk_p,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<4),
+ }
+};
+
+static struct clk init_clocks[] = {
+ {
+ .name = "uart",
+ .id = 0,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<7),
+ }, {
+ .name = "uart",
+ .id = 1,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<8),
+ }, {
+ .name = "uart",
+ .id = 2,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<9),
+ }, {
+ .name = "uart",
+ .id = 3,
+ .parent = &clk_p66,
+ .enable = s5pv210_clk_ip3_ctrl,
+ .ctrlbit = (1<<10),
+ },
+};
+
+static struct clksrc_clk clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ .id = -1,
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ .id = -1,
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ .id = -1,
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 },
+};
+
+static struct clk *clkset_uart_list[] = {
+ [6] = &clk_mout_mpll.clk,
+ [7] = &clk_mout_epll.clk,
+};
+
+static struct clksrc_sources clkset_uart = {
+ .sources = clkset_uart_list,
+ .nr_sources = ARRAY_SIZE(clkset_uart_list),
+};
+
+static struct clksrc_clk clksrcs[] = {
+ {
+ .clk = {
+ .name = "uclk1",
+ .id = -1,
+ .ctrlbit = (1<<17),
+ .enable = s5pv210_clk_ip3_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+ }
+};
+
+/* Clock initialisation code */
+static struct clksrc_clk *init_parents[] = {
+ &clk_mout_apll,
+ &clk_mout_epll,
+ &clk_mout_mpll,
+};
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pv210_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long hclk200;
+ unsigned long hclk166;
+ unsigned long hclk133;
+ unsigned long pclk100;
+ unsigned long pclk83;
+ unsigned long pclk66;
+ unsigned long apll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned int ptr;
+ u32 clkdiv0, clkdiv1;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ clkdiv0 = __raw_readl(S5P_CLK_DIV0);
+ clkdiv1 = __raw_readl(S5P_CLK_DIV1);
+
+ printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+ __func__, clkdiv0, clkdiv1);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
+ epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+
+ printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld",
+ apll, mpll, epll);
+
+ armclk = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_APLL);
+ if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX200_MASK)
+ hclk200 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+ else
+ hclk200 = armclk / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK200);
+
+ if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX166_MASK) {
+ hclk166 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+ hclk166 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+ } else
+ hclk166 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK166);
+
+ if (__raw_readl(S5P_CLK_SRC0) & S5P_CLKSRC0_MUX133_MASK) {
+ hclk133 = apll / GET_DIV(clkdiv0, S5P_CLKDIV0_A2M);
+ hclk133 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+ } else
+ hclk133 = mpll / GET_DIV(clkdiv0, S5P_CLKDIV0_HCLK133);
+
+ pclk100 = hclk200 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK100);
+ pclk83 = hclk166 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK83);
+ pclk66 = hclk133 / GET_DIV(clkdiv0, S5P_CLKDIV0_PCLK66);
+
+ printk(KERN_INFO "S5PV210: ARMCLK=%ld, HCLKM=%ld, HCLKD=%ld, \
+ HCLKP=%ld, PCLKM=%ld, PCLKD=%ld, PCLKP=%ld\n",
+ armclk, hclk200, hclk166, hclk133, pclk100, pclk83, pclk66);
+
+ clk_fout_apll.rate = apll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+
+ clk_f.rate = armclk;
+ clk_h.rate = hclk133;
+ clk_p.rate = pclk66;
+ clk_p66.rate = pclk66;
+ clk_p83.rate = pclk83;
+ clk_h133.rate = hclk133;
+ clk_h166.rate = hclk166;
+ clk_h200.rate = hclk200;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+ s3c_set_clksrc(init_parents[ptr], true);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
+ s3c_set_clksrc(&clksrcs[ptr], true);
+}
+
+static struct clk *clks[] __initdata = {
+ &clk_mout_epll.clk,
+ &clk_mout_mpll.clk,
+};
+
+void __init s5pv210_register_clocks(void)
+{
+ struct clk *clkp;
+ int ret;
+ int ptr;
+
+ ret = s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register %u clocks\n", ret);
+
+ s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+
+ ret = s3c24xx_register_clocks(sys_clks, ARRAY_SIZE(sys_clks));
+ if (ret > 0)
+ printk(KERN_ERR "Failed to register system clocks\n");
+
+ clkp = init_clocks_disable;
+ for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+ ret = s3c24xx_register_clock(clkp);
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to register clock %s (%d)\n",
+ clkp->name, ret);
+ }
+ (clkp->enable)(clkp, 0);
+ }
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
new file mode 100644
index 0000000..0e0f8fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -0,0 +1,126 @@
+/* linux/arch/arm/mach-s5pv210/cpu.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/s5pv210.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pv210_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(S5PV210_PA_SYSTIMER),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC2,
+ .pfn = __phys_to_pfn(S5PV210_PA_VIC2),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)VA_VIC3,
+ .pfn = __phys_to_pfn(S5PV210_PA_VIC3),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(S5PV210_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void s5pv210_idle(void)
+{
+ if (!need_resched())
+ cpu_do_idle();
+
+ local_irq_enable();
+}
+
+/* s5pv210_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pv210_map_io(void)
+{
+ iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+}
+
+void __init s5pv210_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+ s5pv210_register_clocks();
+ s5pv210_setup_clocks();
+}
+
+void __init s5pv210_init_irq(void)
+{
+ u32 vic[4]; /* S5PV210 supports 4 VIC */
+
+ /* All the VICs are fully populated. */
+ vic[0] = ~0;
+ vic[1] = ~0;
+ vic[2] = ~0;
+ vic[3] = ~0;
+
+ s5p_init_irq(vic, ARRAY_SIZE(vic));
+}
+
+static struct sysdev_class s5pv210_sysclass = {
+ .name = "s5pv210-core",
+};
+
+static struct sys_device s5pv210_sysdev = {
+ .cls = &s5pv210_sysclass,
+};
+
+static int __init s5pv210_core_init(void)
+{
+ return sysdev_class_register(&s5pv210_sysclass);
+}
+
+core_initcall(s5pv210_core_init);
+
+int __init s5pv210_init(void)
+{
+ printk(KERN_INFO "S5PV210: Initializing architecture\n");
+
+ /* set idle function */
+ pm_idle = s5pv210_idle;
+
+ return sysdev_register(&s5pv210_sysdev);
+}
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
new file mode 100644
index 0000000..8aec853
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -0,0 +1,42 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+ /* note, for the boot process to work we have to keep the UART
+ * virtual address aligned to an 1MiB boundary for the L1
+ * mapping the head code makes. We keep the UART virtual address
+ * aligned and add in the offset when we load the value here.
+ */
+
+ .macro addruart, rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ ldreq \rx, = S3C_PA_UART
+ ldrne \rx, = S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+ add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+ .endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
new file mode 100644
index 0000000..3aa41ac
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
@@ -0,0 +1,54 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Low-level IRQ helper macros for the Samsung S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =VA_VIC0
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+ @ check the vic0
+ mov \irqnr, # S5P_IRQ_OFFSET + 31
+ ldr \irqstat, [ \base, # VIC_IRQ_STATUS ]
+ teq \irqstat, #0
+
+ @ otherwise try vic1
+ addeq \tmp, \base, #(VA_VIC1 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic2
+ addeq \tmp, \base, #(VA_VIC2 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ @ otherwise try vic3
+ addeq \tmp, \base, #(VA_VIC3 - VA_VIC0)
+ addeq \irqnr, \irqnr, #32
+ ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+ teqeq \irqstat, #0
+
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
new file mode 100644
index 0000000..533b020
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -0,0 +1,129 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/gpio.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H __FILE__
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PV210_GPIO_A0_NR (8)
+#define S5PV210_GPIO_A1_NR (4)
+#define S5PV210_GPIO_B_NR (8)
+#define S5PV210_GPIO_C0_NR (5)
+#define S5PV210_GPIO_C1_NR (5)
+#define S5PV210_GPIO_D0_NR (4)
+#define S5PV210_GPIO_D1_NR (6)
+#define S5PV210_GPIO_E0_NR (8)
+#define S5PV210_GPIO_E1_NR (5)
+#define S5PV210_GPIO_F0_NR (8)
+#define S5PV210_GPIO_F1_NR (8)
+#define S5PV210_GPIO_F2_NR (8)
+#define S5PV210_GPIO_F3_NR (6)
+#define S5PV210_GPIO_G0_NR (7)
+#define S5PV210_GPIO_G1_NR (7)
+#define S5PV210_GPIO_G2_NR (7)
+#define S5PV210_GPIO_G3_NR (7)
+#define S5PV210_GPIO_H0_NR (8)
+#define S5PV210_GPIO_H1_NR (8)
+#define S5PV210_GPIO_H2_NR (8)
+#define S5PV210_GPIO_H3_NR (8)
+#define S5PV210_GPIO_I_NR (7)
+#define S5PV210_GPIO_J0_NR (8)
+#define S5PV210_GPIO_J1_NR (6)
+#define S5PV210_GPIO_J2_NR (8)
+#define S5PV210_GPIO_J3_NR (8)
+#define S5PV210_GPIO_J4_NR (5)
+
+/* GPIO bank numbers */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PV210_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s5p_gpio_number {
+ S5PV210_GPIO_A0_START = 0,
+ S5PV210_GPIO_A1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A0),
+ S5PV210_GPIO_B_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_A1),
+ S5PV210_GPIO_C0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_B),
+ S5PV210_GPIO_C1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C0),
+ S5PV210_GPIO_D0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_C1),
+ S5PV210_GPIO_D1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D0),
+ S5PV210_GPIO_E0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_D1),
+ S5PV210_GPIO_E1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E0),
+ S5PV210_GPIO_F0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_E1),
+ S5PV210_GPIO_F1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F0),
+ S5PV210_GPIO_F2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F1),
+ S5PV210_GPIO_F3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F2),
+ S5PV210_GPIO_G0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_F3),
+ S5PV210_GPIO_G1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G0),
+ S5PV210_GPIO_G2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G1),
+ S5PV210_GPIO_G3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G2),
+ S5PV210_GPIO_H0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_G3),
+ S5PV210_GPIO_H1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H0),
+ S5PV210_GPIO_H2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H1),
+ S5PV210_GPIO_H3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H2),
+ S5PV210_GPIO_I_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_H3),
+ S5PV210_GPIO_J0_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_I),
+ S5PV210_GPIO_J1_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J0),
+ S5PV210_GPIO_J2_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J1),
+ S5PV210_GPIO_J3_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J2),
+ S5PV210_GPIO_J4_START = S5PV210_GPIO_NEXT(S5PV210_GPIO_J3),
+};
+
+/* S5PV210 GPIO number definitions */
+#define S5PV210_GPA0(_nr) (S5PV210_GPIO_A0_START + (_nr))
+#define S5PV210_GPA1(_nr) (S5PV210_GPIO_A1_START + (_nr))
+#define S5PV210_GPB(_nr) (S5PV210_GPIO_B_START + (_nr))
+#define S5PV210_GPC0(_nr) (S5PV210_GPIO_C0_START + (_nr))
+#define S5PV210_GPC1(_nr) (S5PV210_GPIO_C1_START + (_nr))
+#define S5PV210_GPD0(_nr) (S5PV210_GPIO_D0_START + (_nr))
+#define S5PV210_GPD1(_nr) (S5PV210_GPIO_D1_START + (_nr))
+#define S5PV210_GPE0(_nr) (S5PV210_GPIO_E0_START + (_nr))
+#define S5PV210_GPE1(_nr) (S5PV210_GPIO_E1_START + (_nr))
+#define S5PV210_GPF0(_nr) (S5PV210_GPIO_F0_START + (_nr))
+#define S5PV210_GPF1(_nr) (S5PV210_GPIO_F1_START + (_nr))
+#define S5PV210_GPF2(_nr) (S5PV210_GPIO_F2_START + (_nr))
+#define S5PV210_GPF3(_nr) (S5PV210_GPIO_F3_START + (_nr))
+#define S5PV210_GPG0(_nr) (S5PV210_GPIO_G0_START + (_nr))
+#define S5PV210_GPG1(_nr) (S5PV210_GPIO_G1_START + (_nr))
+#define S5PV210_GPG2(_nr) (S5PV210_GPIO_G2_START + (_nr))
+#define S5PV210_GPG3(_nr) (S5PV210_GPIO_G3_START + (_nr))
+#define S5PV210_GPH0(_nr) (S5PV210_GPIO_H0_START + (_nr))
+#define S5PV210_GPH1(_nr) (S5PV210_GPIO_H1_START + (_nr))
+#define S5PV210_GPH2(_nr) (S5PV210_GPIO_H2_START + (_nr))
+#define S5PV210_GPH3(_nr) (S5PV210_GPIO_H3_START + (_nr))
+#define S5PV210_GPI(_nr) (S5PV210_GPIO_I_START + (_nr))
+#define S5PV210_GPJ0(_nr) (S5PV210_GPIO_J0_START + (_nr))
+#define S5PV210_GPJ1(_nr) (S5PV210_GPIO_J1_START + (_nr))
+#define S5PV210_GPJ2(_nr) (S5PV210_GPIO_J2_START + (_nr))
+#define S5PV210_GPJ3(_nr) (S5PV210_GPIO_J3_START + (_nr))
+#define S5PV210_GPJ4(_nr) (S5PV210_GPIO_J4_START + (_nr))
+
+/* the end of the S5PV210 specific gpios */
+#define S5PV210_GPIO_END (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + 1)
+#define S3C_GPIO_END S5PV210_GPIO_END
+
+/* define the number of gpios we need to the one after the GPJ4() range */
+#define ARCH_NR_GPIOS (S5PV210_GPJ4(S5PV210_GPIO_J4_NR) + \
+ CONFIG_SAMSUNG_GPIO_EXTRA + 1)
+
+#include <asm-generic/gpio.h>
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/hardware.h b/arch/arm/mach-s5pv210/include/mach/hardware.h
new file mode 100644
index 0000000..fada7a3
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/hardware.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Hardware support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/io.h b/arch/arm/mach-s5pv210/include/mach/io.h
new file mode 100644
index 0000000..5ab9d56
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/io.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/io.h
+ *
+ * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/io.h
+ *
+ * Default IO routines for S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H __FILE__
+
+/* No current ISA/PCI bus support. */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#define IO_SPACE_LIMIT (0xFFFFFFFF)
+
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
new file mode 100644
index 0000000..62c5175
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -0,0 +1,146 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/irqs.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - IRQ definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+/* VIC0: System, DMA, Timer */
+
+#define IRQ_EINT0 S5P_IRQ_VIC0(0)
+#define IRQ_EINT1 S5P_IRQ_VIC0(1)
+#define IRQ_EINT2 S5P_IRQ_VIC0(2)
+#define IRQ_EINT3 S5P_IRQ_VIC0(3)
+#define IRQ_EINT4 S5P_IRQ_VIC0(4)
+#define IRQ_EINT5 S5P_IRQ_VIC0(5)
+#define IRQ_EINT6 S5P_IRQ_VIC0(6)
+#define IRQ_EINT7 S5P_IRQ_VIC0(7)
+#define IRQ_EINT8 S5P_IRQ_VIC0(8)
+#define IRQ_EINT9 S5P_IRQ_VIC0(9)
+#define IRQ_EINT10 S5P_IRQ_VIC0(10)
+#define IRQ_EINT11 S5P_IRQ_VIC0(11)
+#define IRQ_EINT12 S5P_IRQ_VIC0(12)
+#define IRQ_EINT13 S5P_IRQ_VIC0(13)
+#define IRQ_EINT14 S5P_IRQ_VIC0(14)
+#define IRQ_EINT15 S5P_IRQ_VIC0(15)
+#define IRQ_EINT16_31 S5P_IRQ_VIC0(16)
+#define IRQ_BATF S5P_IRQ_VIC0(17)
+#define IRQ_MDMA S5P_IRQ_VIC0(18)
+#define IRQ_PDMA0 S5P_IRQ_VIC0(19)
+#define IRQ_PDMA1 S5P_IRQ_VIC0(20)
+#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21)
+#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22)
+#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23)
+#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24)
+#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25)
+#define IRQ_SYSTIMER S5P_IRQ_VIC0(26)
+#define IRQ_WDT S5P_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28)
+#define IRQ_RTC_TIC S5P_IRQ_VIC0(29)
+#define IRQ_GPIOINT S5P_IRQ_VIC0(30)
+#define IRQ_FIMC3 S5P_IRQ_VIC0(31)
+
+/* VIC1: ARM, Power, Memory, Connectivity, Storage */
+
+#define IRQ_CORTEX0 S5P_IRQ_VIC1(0)
+#define IRQ_CORTEX1 S5P_IRQ_VIC1(1)
+#define IRQ_CORTEX2 S5P_IRQ_VIC1(2)
+#define IRQ_CORTEX3 S5P_IRQ_VIC1(3)
+#define IRQ_CORTEX4 S5P_IRQ_VIC1(4)
+#define IRQ_IEMAPC S5P_IRQ_VIC1(5)
+#define IRQ_IEMIEC S5P_IRQ_VIC1(6)
+#define IRQ_ONENAND S5P_IRQ_VIC1(7)
+#define IRQ_NFC S5P_IRQ_VIC1(8)
+#define IRQ_CFC S5P_IRQ_VIC1(9)
+#define IRQ_UART0 S5P_IRQ_VIC1(10)
+#define IRQ_UART1 S5P_IRQ_VIC1(11)
+#define IRQ_UART2 S5P_IRQ_VIC1(12)
+#define IRQ_UART3 S5P_IRQ_VIC1(13)
+#define IRQ_IIC S5P_IRQ_VIC1(14)
+#define IRQ_SPI0 S5P_IRQ_VIC1(15)
+#define IRQ_SPI1 S5P_IRQ_VIC1(16)
+#define IRQ_SPI2 S5P_IRQ_VIC1(17)
+#define IRQ_IRDA S5P_IRQ_VIC1(18)
+#define IRQ_CAN0 S5P_IRQ_VIC1(19)
+#define IRQ_CAN1 S5P_IRQ_VIC1(20)
+#define IRQ_HSIRX S5P_IRQ_VIC1(21)
+#define IRQ_HSITX S5P_IRQ_VIC1(22)
+#define IRQ_UHOST S5P_IRQ_VIC1(23)
+#define IRQ_OTG S5P_IRQ_VIC1(24)
+#define IRQ_MSM S5P_IRQ_VIC1(25)
+#define IRQ_HSMMC0 S5P_IRQ_VIC1(26)
+#define IRQ_HSMMC1 S5P_IRQ_VIC1(27)
+#define IRQ_HSMMC2 S5P_IRQ_VIC1(28)
+#define IRQ_MIPICSI S5P_IRQ_VIC1(29)
+#define IRQ_MIPIDSI S5P_IRQ_VIC1(30)
+#define IRQ_ONENAND_AUDI S5P_IRQ_VIC1(31)
+
+/* VIC2: Multimedia, Audio, Security */
+
+#define IRQ_LCD0 S5P_IRQ_VIC2(0)
+#define IRQ_LCD1 S5P_IRQ_VIC2(1)
+#define IRQ_LCD2 S5P_IRQ_VIC2(2)
+#define IRQ_LCD3 S5P_IRQ_VIC2(3)
+#define IRQ_ROTATOR S5P_IRQ_VIC2(4)
+#define IRQ_FIMC0 S5P_IRQ_VIC2(5)
+#define IRQ_FIMC1 S5P_IRQ_VIC2(6)
+#define IRQ_FIMC2 S5P_IRQ_VIC2(7)
+#define IRQ_JPEG S5P_IRQ_VIC2(8)
+#define IRQ_2D S5P_IRQ_VIC2(9)
+#define IRQ_3D S5P_IRQ_VIC2(10)
+#define IRQ_MIXER S5P_IRQ_VIC2(11)
+#define IRQ_HDMI S5P_IRQ_VIC2(12)
+#define IRQ_IIC1 S5P_IRQ_VIC2(13)
+#define IRQ_MFC S5P_IRQ_VIC2(14)
+#define IRQ_TVENC S5P_IRQ_VIC2(15)
+#define IRQ_I2S0 S5P_IRQ_VIC2(16)
+#define IRQ_I2S1 S5P_IRQ_VIC2(17)
+#define IRQ_I2S2 S5P_IRQ_VIC2(18)
+#define IRQ_AC97 S5P_IRQ_VIC2(19)
+#define IRQ_PCM0 S5P_IRQ_VIC2(20)
+#define IRQ_PCM1 S5P_IRQ_VIC2(21)
+#define IRQ_SPDIF S5P_IRQ_VIC2(22)
+#define IRQ_ADC S5P_IRQ_VIC2(23)
+#define IRQ_PENDN S5P_IRQ_VIC2(24)
+#define IRQ_TC IRQ_PENDN
+#define IRQ_KEYPAD S5P_IRQ_VIC2(25)
+#define IRQ_CG S5P_IRQ_VIC2(26)
+#define IRQ_SEC S5P_IRQ_VIC2(27)
+#define IRQ_SECRX S5P_IRQ_VIC2(28)
+#define IRQ_SECTX S5P_IRQ_VIC2(29)
+#define IRQ_SDMIRQ S5P_IRQ_VIC2(30)
+#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
+
+/* VIC3: Etc */
+
+#define IRQ_IPC S5P_IRQ_VIC3(0)
+#define IRQ_HOSTIF S5P_IRQ_VIC3(1)
+#define IRQ_MMC3 S5P_IRQ_VIC3(2)
+#define IRQ_CEC S5P_IRQ_VIC3(3)
+#define IRQ_TSI S5P_IRQ_VIC3(4)
+#define IRQ_MDNIE0 S5P_IRQ_VIC3(5)
+#define IRQ_MDNIE1 S5P_IRQ_VIC3(6)
+#define IRQ_MDNIE2 S5P_IRQ_VIC3(7)
+#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
+#define IRQ_VIC_END S5P_IRQ_VIC3(31)
+
+#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1)
+
+#define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE)
+#define IRQ_EINT(x) S5P_EINT(x)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_EINT(31) + 1)
+
+#endif /* ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
new file mode 100644
index 0000000..c22694c
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/map.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+#include <plat/map-s5p.h>
+
+#define S5PV210_PA_CHIPID (0xE0000000)
+#define S5P_PA_CHIPID S5PV210_PA_CHIPID
+
+#define S5PV210_PA_SYSCON (0xE0100000)
+#define S5P_PA_SYSCON S5PV210_PA_SYSCON
+
+#define S5PV210_PA_GPIO (0xE0200000)
+#define S5P_PA_GPIO S5PV210_PA_GPIO
+
+#define S5PV210_PA_IIC0 (0xE1800000)
+
+#define S5PV210_PA_TIMER (0xE2500000)
+#define S5P_PA_TIMER S5PV210_PA_TIMER
+
+#define S5PV210_PA_SYSTIMER (0xE2600000)
+
+#define S5PV210_PA_UART (0xE2900000)
+
+#define S5P_PA_UART0 (S5PV210_PA_UART + 0x0)
+#define S5P_PA_UART1 (S5PV210_PA_UART + 0x400)
+#define S5P_PA_UART2 (S5PV210_PA_UART + 0x800)
+#define S5P_PA_UART3 (S5PV210_PA_UART + 0xC00)
+
+#define S5P_SZ_UART SZ_256
+
+#define S5PV210_PA_SROMC (0xE8000000)
+
+#define S5PV210_PA_VIC0 (0xF2000000)
+#define S5P_PA_VIC0 S5PV210_PA_VIC0
+
+#define S5PV210_PA_VIC1 (0xF2100000)
+#define S5P_PA_VIC1 S5PV210_PA_VIC1
+
+#define S5PV210_PA_VIC2 (0xF2200000)
+#define S5P_PA_VIC2 S5PV210_PA_VIC2
+
+#define S5PV210_PA_VIC3 (0xF2300000)
+#define S5P_PA_VIC3 S5PV210_PA_VIC3
+
+#define S5PV210_PA_SDRAM (0x20000000)
+#define S5P_PA_SDRAM S5PV210_PA_SDRAM
+
+/* compatibiltiy defines. */
+#define S3C_PA_UART S5PV210_PA_UART
+#define S3C_PA_IIC S5PV210_PA_IIC0
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
new file mode 100644
index 0000000..379117e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/memory.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Memory definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x20000000)
+#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
+
+/* Maximum of 256MiB in one bank */
+#define MAX_PHYSMEM_BITS 32
+#define SECTION_SIZE_BITS 28
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
new file mode 100644
index 0000000..69027fe
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
@@ -0,0 +1,69 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/plat-s3c24xx/include/mach/pwm-clock.h
+ *
+ * S5PV210 - pwm clock and timer support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_PWMCLK_H
+#define __ASM_ARCH_PWMCLK_H __FILE__
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @cfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+ return tcfg == S3C2410_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+ return 1 << (1 + tcfg1);
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+ return 0;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+ return ilog2(div) - 1;
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK
+
+#endif /* __ASM_ARCH_PWMCLK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
new file mode 100644
index 0000000..e56e0e4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -0,0 +1,169 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - Clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#include <mach/map.h>
+
+#define S5P_CLKREG(x) (S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON S5P_CLKREG(0x100)
+#define S5P_MPLL_CON S5P_CLKREG(0x108)
+#define S5P_EPLL_CON S5P_CLKREG(0x110)
+#define S5P_VPLL_CON S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0 S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1 S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2 S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3 S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4 S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5 S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6 S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0 S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1 S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2 S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3 S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4 S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5 S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6 S5P_CLKREG(0x318)
+#define S5P_CLK_DIV7 S5P_CLKREG(0x31C)
+
+#define S5P_CLKGATE_MAIN0 S5P_CLKREG(0x400)
+#define S5P_CLKGATE_MAIN1 S5P_CLKREG(0x404)
+#define S5P_CLKGATE_MAIN2 S5P_CLKREG(0x408)
+
+#define S5P_CLKGATE_PERI0 S5P_CLKREG(0x420)
+#define S5P_CLKGATE_PERI1 S5P_CLKREG(0x424)
+
+#define S5P_CLKGATE_SCLK0 S5P_CLKREG(0x440)
+#define S5P_CLKGATE_SCLK1 S5P_CLKREG(0x444)
+#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460)
+#define S5P_CLKGATE_IP1 S5P_CLKREG(0x464)
+#define S5P_CLKGATE_IP2 S5P_CLKREG(0x468)
+#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C)
+#define S5P_CLKGATE_IP4 S5P_CLKREG(0x470)
+
+#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x480)
+#define S5P_CLKGATE_BUS0 S5P_CLKREG(0x484)
+#define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488)
+#define S5P_CLK_OUT S5P_CLKREG(0x500)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_MASK (0x1<<16)
+#define S5P_CLKSRC0_MUX166_MASK (0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK (0x1<<24)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT (0)
+#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT (4)
+#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT (8)
+#define S5P_CLKDIV0_HCLK200_MASK (0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT (12)
+#define S5P_CLKDIV0_PCLK100_MASK (0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT (16)
+#define S5P_CLKDIV0_HCLK166_MASK (0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT (20)
+#define S5P_CLKDIV0_PCLK83_MASK (0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT (24)
+#define S5P_CLKDIV0_HCLK133_MASK (0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT (28)
+#define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* Registers related to power management */
+#define S5P_PWR_CFG S5P_CLKREG(0xC000)
+#define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004)
+#define S5P_WAKEUP_MASK S5P_CLKREG(0xC008)
+#define S5P_PWR_MODE S5P_CLKREG(0xC00C)
+#define S5P_NORMAL_CFG S5P_CLKREG(0xC010)
+#define S5P_IDLE_CFG S5P_CLKREG(0xC020)
+#define S5P_STOP_CFG S5P_CLKREG(0xC030)
+#define S5P_STOP_MEM_CFG S5P_CLKREG(0xC034)
+#define S5P_SLEEP_CFG S5P_CLKREG(0xC040)
+
+#define S5P_OSC_FREQ S5P_CLKREG(0xC100)
+#define S5P_OSC_STABLE S5P_CLKREG(0xC104)
+#define S5P_PWR_STABLE S5P_CLKREG(0xC108)
+#define S5P_MTC_STABLE S5P_CLKREG(0xC110)
+#define S5P_CLAMP_STABLE S5P_CLKREG(0xC114)
+
+#define S5P_WAKEUP_STAT S5P_CLKREG(0xC200)
+#define S5P_BLK_PWR_STAT S5P_CLKREG(0xC204)
+
+#define S5P_OTHERS S5P_CLKREG(0xE000)
+#define S5P_OM_STAT S5P_CLKREG(0xE100)
+#define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C)
+#define S5P_DAC_CONTROL S5P_CLKREG(0xE810)
+
+#define S5P_INFORM0 S5P_CLKREG(0xF000)
+#define S5P_INFORM1 S5P_CLKREG(0xF004)
+#define S5P_INFORM2 S5P_CLKREG(0xF008)
+#define S5P_INFORM3 S5P_CLKREG(0xF00C)
+#define S5P_INFORM4 S5P_CLKREG(0xF010)
+#define S5P_INFORM5 S5P_CLKREG(0xF014)
+#define S5P_INFORM6 S5P_CLKREG(0xF018)
+#define S5P_INFORM7 S5P_CLKREG(0xF01C)
+
+#define S5P_RST_STAT S5P_CLKREG(0xA000)
+#define S5P_OSC_CON S5P_CLKREG(0x8000)
+#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200)
+#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204)
+#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814)
+
+#define S5P_IDLE_CFG_TL_MASK (3 << 30)
+#define S5P_IDLE_CFG_TM_MASK (3 << 28)
+#define S5P_IDLE_CFG_TL_ON (2 << 30)
+#define S5P_IDLE_CFG_TM_ON (2 << 28)
+#define S5P_IDLE_CFG_DIDLE (1 << 0)
+
+#define S5P_CFG_WFI_CLEAN (~(3 << 8))
+#define S5P_CFG_WFI_IDLE (1 << 8)
+#define S5P_CFG_WFI_STOP (2 << 8)
+#define S5P_CFG_WFI_SLEEP (3 << 8)
+
+#define S5P_OTHER_SYS_INT 24
+#define S5P_OTHER_STA_TYPE 23
+#define S5P_OTHER_SYSC_INTOFF (1 << 0)
+#define STA_TYPE_EXPON 0
+#define STA_TYPE_SFR 1
+
+#define S5P_PWR_STA_EXP_SCALE 0
+#define S5P_PWR_STA_CNT 4
+
+#define S5P_PWR_STABLE_COUNT 85500
+
+#define S5P_SLEEP_CFG_OSC_EN (1 << 0)
+#define S5P_SLEEP_CFG_USBOSC_EN (1 << 1)
+
+/* OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK (1 << 16)
+#define S5P_OTHERS_MIPI_DPHY_EN (1 << 28)
+
+/* MIPI */
+#define S5P_MIPI_DPHY_EN (3)
+
+/* S5P_DAC_CONTROL */
+#define S5P_DAC_ENABLE (1)
+#define S5P_DAC_DISABLE (0)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
new file mode 100644
index 0000000..5c3b104
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
new file mode 100644
index 0000000..1ca04d5
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/system.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/system.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - system support header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+ /* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+ /* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
new file mode 100644
index 0000000..7993b36
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/tick.h
@@ -0,0 +1,26 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s3c6400/include/mach/tick.h
+ *
+ * S5PV210 - Timer tick support definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+ u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
+ return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
+}
+
+#define TICK_MAX (0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s3c/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
similarity index 66%
copy from arch/arm/plat-s3c/include/mach/timex.h
copy to arch/arm/mach-s5pv210/include/mach/timex.h
index 2a425ed..73dc854 100644
--- a/arch/arm/plat-s3c/include/mach/timex.h
+++ b/arch/arm/mach-s5pv210/include/mach/timex.h
@@ -1,9 +1,14 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
+/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
*
- * Copyright (c) 2003-2005 Simtec Electronics
+ * Copyright (c) 2003-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * S3C2410 - time parameters
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/timex.h
+ *
+ * S5PV210 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,7 +16,7 @@
*/
#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H __FILE__
/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
* a variable is useless. It seems as long as we make our timers an
@@ -19,8 +24,6 @@
* for the time conversion functions to/from jiffies is acceptable.
*/
-
#define CLOCK_TICK_RATE 12000000
-
#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/uncompress.h b/arch/arm/mach-s5pv210/include/mach/uncompress.h
new file mode 100644
index 0000000..08ff2fd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/uncompress.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5PV210 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+ /* we do not need to do any cpu detection here at the moment. */
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/vmalloc.h b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
new file mode 100644
index 0000000..58f515e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* linux/arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Based on arch/arm/mach-s5p6442/include/mach/vmalloc.h
+ *
+ * S5PV210 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H __FILE__
+
+#define VMALLOC_END (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
new file mode 100644
index 0000000..4865ae2
--- /dev/null
+++ b/arch/arm/mach-s5pv210/init.c
@@ -0,0 +1,44 @@
+/* linux/arch/arm/mach-s5pv210/init.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pv210.h>
+#include <plat/regs-serial.h>
+
+static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
+ [0] = {
+ .name = "pclk",
+ .divisor = 1,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+/* uart registration process */
+void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+ struct s3c2410_uartcfg *tcfg = cfg;
+ u32 ucnt;
+
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+ if (!tcfg->clocks) {
+ tcfg->clocks = s5pv210_serial_clocks;
+ tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
+ }
+ }
+
+ s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
new file mode 100644
index 0000000..ab4869d
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkc110.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *smdkc110_devices[] __initdata = {
+};
+
+static void __init smdkc110_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkc110_machine_init(void)
+{
+ platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
+}
+
+MACHINE_START(SMDKC110, "SMDKC110")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = smdkc110_map_io,
+ .init_machine = smdkc110_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
new file mode 100644
index 0000000..a278832
--- /dev/null
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -0,0 +1,98 @@
+/* linux/arch/arm/mach-s5pv210/mach-smdkv210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv210.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ulcon = S5PV210_ULCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+};
+
+static struct platform_device *smdkv210_devices[] __initdata = {
+};
+
+static void __init smdkv210_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+ s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+}
+
+static void __init smdkv210_machine_init(void)
+{
+ platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
+}
+
+MACHINE_START(SMDKV210, "SMDKV210")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S5P_PA_SDRAM + 0x100,
+ .init_irq = s5pv210_init_irq,
+ .map_io = smdkv210_map_io,
+ .init_machine = smdkv210_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
deleted file mode 100644
index 2367908..0000000
--- a/arch/arm/plat-s3c/Kconfig
+++ /dev/null
@@ -1,96 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C
- bool
- depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX
- default y
- select NO_IOPORT
- help
- Base platform code for any Samsung S3C device
-
-# low-level serial option nodes
-
-if PLAT_S3C
-
-config CPU_LLSERIAL_S3C2410_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
- bool
- default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
- bool
- help
- Selected if there is an S3C2410 (or register compatible) serial
- low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
- bool
- help
- Selected if there is an S3C2440 (or register compatible) serial
- low-level implementation needed
-
-# boot configurations
-
-comment "Boot options"
-
-config S3C_BOOT_WATCHDOG
- bool "S3C Initialisation watchdog"
- depends on S3C2410_WATCHDOG
- help
- Say y to enable the watchdog during the kernel decompression
- stage. If the kernel fails to uncompress, then the watchdog
- will trigger a reset and the system should restart.
-
-config S3C_BOOT_ERROR_RESET
- bool "S3C Reboot on decompression error"
- help
- Say y here to use the watchdog to reset the system if the
- kernel decompressor detects an error during decompression.
-
-config S3C_BOOT_UART_FORCE_FIFO
- bool "Force UART FIFO on during boot process"
- default y
- help
- Say Y here to force the UART FIFOs on during the kernel
- uncompressor
-
-
-config S3C_LOWLEVEL_UART_PORT
- int "S3C UART to use for low-level messages"
- default 0
- help
- Choice of which UART port to use for the low-level messages,
- such as the `Uncompressing...` at start time. The value of
- this configuration should be between zero and two. The port
- must have been initialised by the boot-loader before use.
-
-# options for gpiolib support
-
-config S3C_GPIO_SPACE
- int "Space between gpio banks"
- default 0
- help
- Add a number of spare GPIO entries between each bank for debugging
- purposes. This allows any problems where an counter overflows from
- one bank to another to be caught, at the expense of using a little
- more memory.
-
-config S3C_GPIO_TRACK
- bool
- help
- Internal configuration option to enable the s3c specific gpio
- chip tracking if the platform requires it.
-
-# DMA
-
-config S3C_DMA
- bool
- help
- Internal configuration for S3C DMA core
-
-endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
deleted file mode 100644
index 89dbdb0..0000000
--- a/arch/arm/plat-s3c/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-# arch/arm/plat-s3c/Makefile
-#
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
-# Core support for all Samsung SoCs
-
-obj-y += init.o
-obj-y += time.o
-
-# DMA support
-
-obj-$(CONFIG_S3C_DMA) += dma.o
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a806f35..6e93ef8 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -14,6 +14,28 @@
if PLAT_S3C24XX
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+ bool
+ default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+ bool
+ help
+ Selected if there is an S3C2410 (or register compatible) serial
+ low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+ bool
+ help
+ Selected if there is an S3C2440 (or register compatible) serial
+ low-level implementation needed
+
# code that is shared between a number of the s3c24xx implementations
config S3C2410_CLOCK
@@ -27,46 +49,6 @@
help
Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-config CPU_S3C244X
- bool
- depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442)
- help
- Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-config S3C2440_CPUFREQ
- bool "S3C2440/S3C2442 CPU Frequency scaling support"
- depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
- select S3C2410_CPUFREQ_UTILS
- default y
- help
- CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
- bool
- help
- Indicate that the build needs to support 12MHz system
- crystal.
-
-config S3C2440_XTAL_16934400
- bool
- help
- Indicate that the build needs to support 16.9344MHz system
- crystal.
-
-config S3C2440_PLL_12000000
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
- bool
- depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
- default y if CPU_FREQ_S3C24XX_PLL
- help
- PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
config S3C24XX_PWM
bool "PWM device support"
select HAVE_PWM
@@ -74,7 +56,6 @@
Support for exporting the PWM timer blocks via the pwm device
system.
-
# gpio configurations
config S3C24XX_GPIO_EXTRA
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index e010026..c2237c4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -25,13 +25,6 @@
# Architecture dependant builds
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
-obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 4af9dd9..9ca64df 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -49,9 +49,7 @@
#include <plat/s3c2400.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
-#include "s3c244x.h"
-#include <plat/s3c2440.h>
-#include <plat/s3c2442.h>
+#include <plat/s3c244x.h>
#include <plat/s3c2443.h>
/* table of supported CPUs */
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 986d4e5..8c6de1c 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -158,9 +158,27 @@
}
/* Touchscreen */
+
+static struct resource s3c_ts_resource[] = {
+ [0] = {
+ .start = S3C24XX_PA_ADC,
+ .end = S3C24XX_PA_ADC + S3C24XX_SZ_ADC - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_TC,
+ .end = IRQ_TC,
+ .flags = IORESOURCE_IRQ,
+ },
+
+};
+
struct platform_device s3c_device_ts = {
.name = "s3c2410-ts",
.id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+ .num_resources = ARRAY_SIZE(s3c_ts_resource),
+ .resource = s3c_ts_resource,
};
EXPORT_SYMBOL(s3c_device_ts);
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f0ea794..93827b3 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -33,7 +33,7 @@
#include <mach/dma.h>
#include <mach/map.h>
-#include <plat/dma-plat.h>
+#include <plat/dma-s3c24xx.h>
#include <plat/regs-dma.h>
/* io map for dma */
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
similarity index 94%
rename from arch/arm/plat-s3c/include/plat/audio-simtec.h
rename to arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
index 53a9365..de5e88f 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h
*
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h b/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
deleted file mode 100644
index 107853b..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2440.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2440 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2440
-extern int s3c2440_init(void);
-#else
-#define s3c2440_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h b/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
deleted file mode 100644
index 451a23a..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2442.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Header file for s3c2442 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifdef CONFIG_CPU_S3C2442
-extern int s3c2442_init(void);
-#else
-#define s3c2442_init NULL
-#endif
diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
similarity index 72%
rename from arch/arm/plat-s3c24xx/s3c244x.h
rename to arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 6aab5ea..307248d 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -23,3 +23,15 @@
#define s3c244x_init_uarts NULL
#define s3c244x_map_io NULL
#endif
+
+#ifdef CONFIG_CPU_S3C2440
+extern int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2442
+extern int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
deleted file mode 100644
index 37b4519..0000000
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-# Ben Dooks <ben@simtec.co.uk>
-#
-# Licensed under GPLv2
-
-config PLAT_S3C64XX
- bool
- depends on ARCH_S3C64XX
- default y
- select CPU_V6
- select PLAT_S3C
- select ARM_VIC
- select NO_IOPORT
- select ARCH_REQUIRE_GPIOLIB
- select SAMSUNG_CLKSRC
- select SAMSUNG_IRQ_VIC_TIMER
- select SAMSUNG_IRQ_UART
- select S3C_GPIO_TRACK
- select S3C_GPIO_PULL_UPDOWN
- select S3C_GPIO_CFG_S3C24XX
- select S3C_GPIO_CFG_S3C64XX
- select S3C_DEV_NAND
- select USB_ARCH_HAS_OHCI
- select SAMSUNG_GPIOLIB_4BIT
- help
- Base platform code for any Samsung S3C64XX device
-
-if PLAT_S3C64XX
-
-# Configuration options shared by all S3C64XX implementations
-
-config CPU_S3C6400_INIT
- bool
- help
- Common initialisation code for the S3C6400 that is shared
- by other CPUs in the series, such as the S3C6410.
-
-config CPU_S3C6400_CLOCK
- bool
- help
- Common clock support code for the S3C6400 that is shared
- by other CPUs in the series, such as the S3C6410.
-
-config S3C64XX_DMA
- bool "S3C64XX DMA"
- select S3C_DMA
-
-# platform specific device setup
-
-config S3C64XX_SETUP_I2C0
- bool
- default y
- help
- Common setup code for i2c bus 0.
-
- Note, currently since i2c0 is always compiled, this setup helper
- is always compiled with it.
-
-config S3C64XX_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config S3C64XX_SETUP_FB_24BPP
- bool
- help
- Common setup code for S3C64XX with an 24bpp RGB display helper.
-
-config S3C64XX_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for S3C64XX SDHCI GPIO configurations
-
-endif
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
deleted file mode 100644
index 80255a5..0000000
--- a/arch/arm/plat-s3c64xx/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-# arch/arm/plat-s3c64xx/Makefile
-#
-# Copyright 2008 Openmoko, Inc.
-# Copyright 2008 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
-# Core files
-
-obj-y += dev-uart.o
-obj-y += dev-rtc.o
-obj-y += cpu.o
-obj-y += irq.o
-obj-y += irq-eint.o
-obj-y += clock.o
-obj-y += gpiolib.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
-obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
-obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
-
-# PM support
-
-obj-$(CONFIG_PM) += pm.o
-obj-$(CONFIG_PM) += sleep.o
-obj-$(CONFIG_PM) += irq-pm.o
-
-# DMA support
-
-obj-$(CONFIG_S3C64XX_DMA) += dma.o
-
-# ADC support
-
-obj-$(CONFIG_S3C_ADC) += dev-adc.o
-
-# Device setup
-
-obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
-obj-$(CONFIG_SPI_S3C64XX) += dev-spi.o
diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c
deleted file mode 100644
index 2989c3a..0000000
--- a/arch/arm/plat-s3c64xx/clock.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/clock.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX Base clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-
-#include <plat/regs-sys.h>
-#include <plat/regs-clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/clock.h>
-
-struct clk clk_h2 = {
- .name = "hclk2",
- .id = -1,
- .rate = 0,
-};
-
-struct clk clk_27m = {
- .name = "clk_27m",
- .id = -1,
- .rate = 27000000,
-};
-
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
- unsigned long flags;
- u32 val;
-
- /* can't rely on clock lock, this register has other usages */
- local_irq_save(flags);
-
- val = __raw_readl(S3C64XX_OTHERS);
- if (enable)
- val |= S3C64XX_OTHERS_USBMASK;
- else
- val &= ~S3C64XX_OTHERS_USBMASK;
-
- __raw_writel(val, S3C64XX_OTHERS);
- local_irq_restore(flags);
-
- return 0;
-}
-
-struct clk clk_48m = {
- .name = "clk_48m",
- .id = -1,
- .rate = 48000000,
- .enable = clk_48m_ctrl,
-};
-
-static int inline s3c64xx_gate(void __iomem *reg,
- struct clk *clk,
- int enable)
-{
- unsigned int ctrlbit = clk->ctrlbit;
- u32 con;
-
- con = __raw_readl(reg);
-
- if (enable)
- con |= ctrlbit;
- else
- con &= ~ctrlbit;
-
- __raw_writel(con, reg);
- return 0;
-}
-
-static int s3c64xx_pclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_PCLK_GATE, clk, enable);
-}
-
-static int s3c64xx_hclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_HCLK_GATE, clk, enable);
-}
-
-int s3c64xx_sclk_ctrl(struct clk *clk, int enable)
-{
- return s3c64xx_gate(S3C_SCLK_GATE, clk, enable);
-}
-
-static struct clk init_clocks_disable[] = {
- {
- .name = "nand",
- .id = -1,
- .parent = &clk_h,
- }, {
- .name = "adc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_TSADC,
- }, {
- .name = "i2c",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIC,
- }, {
- .name = "iis",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS0,
- }, {
- .name = "iis",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_IIS1,
- }, {
- .name = "spi",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI0,
- }, {
- .name = "spi",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_SPI1,
- }, {
- .name = "spi_48m",
- .id = 0,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
- }, {
- .name = "spi_48m",
- .id = 1,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
- }, {
- .name = "48m",
- .id = 0,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC0_48,
- }, {
- .name = "48m",
- .id = 1,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC1_48,
- }, {
- .name = "48m",
- .id = 2,
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
- }, {
- .name = "dma0",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA0,
- }, {
- .name = "dma1",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_DMA1,
- },
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "lcd",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_LCD,
- }, {
- .name = "gpio",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_GPIO,
- }, {
- .name = "usb-host",
- .id = -1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_UHOST,
- }, {
- .name = "hsmmc",
- .id = 0,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
- }, {
- .name = "hsmmc",
- .id = 1,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
- }, {
- .name = "hsmmc",
- .id = 2,
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
- }, {
- .name = "timers",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_PWM,
- }, {
- .name = "uart",
- .id = 0,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART0,
- }, {
- .name = "uart",
- .id = 1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART1,
- }, {
- .name = "uart",
- .id = 2,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART2,
- }, {
- .name = "uart",
- .id = 3,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_UART3,
- }, {
- .name = "rtc",
- .id = -1,
- .parent = &clk_p,
- .enable = s3c64xx_pclk_ctrl,
- .ctrlbit = S3C_CLKCON_PCLK_RTC,
- }, {
- .name = "watchdog",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_WDT,
- }, {
- .name = "ac97",
- .id = -1,
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_AC97,
- }
-};
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_epll,
- &clk_27m,
- &clk_48m,
- &clk_h2,
-};
-
-void __init s3c64xx_register_clocks(void)
-{
- struct clk *clkp;
- int ret;
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- (clkp->enable)(clkp, 0);
- }
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
deleted file mode 100644
index 8f76a1e..0000000
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
- *
- * Copyright 2009 Openmoko, Inc.
- * Copyright 2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C64XX DMA core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
-
-struct s3c64xx_dma_buff;
-
-/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
- * @next: Pointer to next buffer in queue or ring.
- * @pw: Client provided identifier
- * @lli: Pointer to hardware descriptor this buffer is associated with.
- * @lli_dma: Hardare address of the descriptor.
- */
-struct s3c64xx_dma_buff {
- struct s3c64xx_dma_buff *next;
-
- void *pw;
- struct pl080s_lli *lli;
- dma_addr_t lli_dma;
-};
-
-struct s3c64xx_dmac;
-
-struct s3c2410_dma_chan {
- unsigned char number; /* number of this dma channel */
- unsigned char in_use; /* channel allocated */
- unsigned char bit; /* bit for enable/disable/etc */
- unsigned char hw_width;
- unsigned char peripheral;
-
- unsigned int flags;
- enum s3c2410_dmasrc source;
-
-
- dma_addr_t dev_addr;
-
- struct s3c2410_dma_client *client;
- struct s3c64xx_dmac *dmac; /* pointer to controller */
-
- void __iomem *regs;
-
- /* cdriver callbacks */
- s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
- s3c2410_dma_opfn_t op_fn; /* channel op callback */
-
- /* buffer list and information */
- struct s3c64xx_dma_buff *curr; /* current dma buffer */
- struct s3c64xx_dma_buff *next; /* next buffer to load */
- struct s3c64xx_dma_buff *end; /* end of queue */
-
- /* note, when channel is running in circular mode, curr is the
- * first buffer enqueued, end is the last and curr is where the
- * last buffer-done event is set-at. The buffers are not freed
- * and the last buffer hardware descriptor points back to the
- * first.
- */
-};
-
-#include <plat/dma-core.h>
diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c
deleted file mode 100644
index 6c28f39..0000000
--- a/arch/arm/plat-s3c64xx/s3c6400-init.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - CPU initialisation (common with other S3C64XX chips)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/s3c6400.h>
-#include <plat/s3c6410.h>
-
-/* uart registration process */
-
-void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no);
-}
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index e7c31e7..d400a6a 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -7,9 +7,8 @@
config PLAT_S5P
bool
- depends on ARCH_S5P6440
+ depends on (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PV210)
default y
- select PLAT_S3C
select ARM_VIC
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
@@ -24,19 +23,3 @@
select SAMSUNG_IRQ_UART
help
Base platform code for Samsung's S5P series SoC.
-
-if (PLAT_S5P && ARCH_S5P6440)
-
-# Configuration options shared by all S5P64XX implementations
-
-config CPU_S5P6440_INIT
- bool
- help
- Initialisation code for the S5P6440.
-
-config CPU_S5P6440_CLOCK
- bool
- help
- Clock support code for the S5P6440.
-
-endif
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 92b6474..a7c54b3 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -17,8 +17,3 @@
obj-y += clock.o
obj-y += irq.o
obj-y += setup-i2c0.o
-
-# CPU support
-
-obj-$(CONFIG_CPU_S5P6440_INIT) += s5p6440-init.o
-obj-$(CONFIG_CPU_S5P6440_CLOCK) += s5p6440-clock.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 3d3c0f1..aa96e33 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -33,6 +33,12 @@
.id = -1,
};
+static struct clk s5p_clk_27m = {
+ .name = "clk_27m",
+ .id = -1,
+ .rate = 27000000,
+};
+
/* 48MHz USB Phy clock output */
struct clk clk_48m = {
.name = "clk_48m",
@@ -104,6 +110,11 @@
.nr_sources = ARRAY_SIZE(clk_src_epll_list),
};
+struct clk clk_vpll = {
+ .name = "vpll",
+ .id = -1,
+};
+
int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable)
{
unsigned int ctrlbit = clk->ctrlbit;
@@ -118,10 +129,12 @@
static struct clk *s5p_clks[] __initdata = {
&clk_ext_xtal_mux,
&clk_48m,
+ &s5p_clk_27m,
&clk_fout_apll,
&clk_fout_mpll,
&clk_fout_epll,
&clk_arm,
+ &clk_vpll,
};
void __init s5p_register_clocks(unsigned long xtal_freq)
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index 0895a77..f92e5de 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -18,10 +18,14 @@
#include <mach/regs-clock.h>
#include <plat/cpu.h>
#include <plat/s5p6440.h>
+#include <plat/s5p6442.h>
+#include <plat/s5pv210.h>
/* table of supported CPUs */
static const char name_s5p6440[] = "S5P6440";
+static const char name_s5p6442[] = "S5P6442";
+static const char name_s5pv210[] = "S5PV210/S5PC110";
static struct cpu_table cpu_ids[] __initdata = {
{
@@ -32,36 +36,55 @@
.init_uarts = s5p6440_init_uarts,
.init = s5p6440_init,
.name = name_s5p6440,
+ }, {
+ .idcode = 0x36442000,
+ .idmask = 0xffffff00,
+ .map_io = s5p6442_map_io,
+ .init_clocks = s5p6442_init_clocks,
+ .init_uarts = s5p6442_init_uarts,
+ .init = s5p6442_init,
+ .name = name_s5p6442,
+ }, {
+ .idcode = 0x43110000,
+ .idmask = 0xfffff000,
+ .map_io = s5pv210_map_io,
+ .init_clocks = s5pv210_init_clocks,
+ .init_uarts = s5pv210_init_uarts,
+ .init = s5pv210_init,
+ .name = name_s5pv210,
},
};
/* minimal IO mapping */
-#define UART_OFFS (S5P_PA_UART & 0xfffff)
-
static struct map_desc s5p_iodesc[] __initdata = {
{
- .virtual = (unsigned long)S5P_VA_SYSCON,
+ .virtual = (unsigned long)S5P_VA_CHIPID,
+ .pfn = __phys_to_pfn(S5P_PA_CHIPID),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(S5P_PA_SYSCON),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)(S5P_VA_UART + UART_OFFS),
- .pfn = __phys_to_pfn(S5P_PA_UART),
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(S3C_PA_UART),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_VIC0,
+ .virtual = (unsigned long)VA_VIC0,
.pfn = __phys_to_pfn(S5P_PA_VIC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_VIC1,
+ .virtual = (unsigned long)VA_VIC1,
.pfn = __phys_to_pfn(S5P_PA_VIC1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_TIMER,
+ .virtual = (unsigned long)S3C_VA_TIMER,
.pfn = __phys_to_pfn(S5P_PA_TIMER),
.length = SZ_16K,
.type = MT_DEVICE,
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index 23c7531..a89331e 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -95,6 +95,7 @@
};
static struct resource s5p_uart3_resource[] = {
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[0] = {
.start = S5P_PA_UART3,
.end = S5P_PA_UART3 + S5P_SZ_UART,
@@ -115,6 +116,7 @@
.end = IRQ_S5P_UART_ERR3,
.flags = IORESOURCE_IRQ,
},
+#endif
};
struct s3c24xx_uart_resources s5p_uart_resources[] __initdata = {
diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h
index 5d7937d..42e757f 100644
--- a/arch/arm/plat-s5p/include/plat/irqs.h
+++ b/arch/arm/plat-s5p/include/plat/irqs.h
@@ -28,9 +28,14 @@
#define S5P_VIC0_BASE S5P_IRQ(0)
#define S5P_VIC1_BASE S5P_IRQ(32)
+#define S5P_VIC2_BASE S5P_IRQ(64)
+#define S5P_VIC3_BASE S5P_IRQ(96)
+
+#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
#define IRQ_VIC0_BASE S5P_VIC0_BASE
#define IRQ_VIC1_BASE S5P_VIC1_BASE
+#define IRQ_VIC2_BASE S5P_VIC2_BASE
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
@@ -71,8 +76,10 @@
#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
+#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
+#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-#define S5P_TIMER_IRQ(x) S5P_IRQ(64 + (x))
+#define S5P_TIMER_IRQ(x) S5P_IRQ(11 + (x))
#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
new file mode 100644
index 0000000..1482852
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S5P_H
+#define __ASM_PLAT_MAP_S5P_H __FILE__
+
+#define S5P_VA_CHIPID S3C_ADDR(0x00700000)
+#define S5P_VA_GPIO S3C_ADDR(0x00500000)
+#define S5P_VA_SYSTIMER S3C_ADDR(0x01200000)
+#define S5P_VA_SROMC S3C_ADDR(0x01100000)
+
+#define S5P_VA_UART0 (S3C_VA_UART + 0x0)
+#define S5P_VA_UART1 (S3C_VA_UART + 0x400)
+#define S5P_VA_UART2 (S3C_VA_UART + 0x800)
+#define S5P_VA_UART3 (S3C_VA_UART + 0xC00)
+
+#define S3C_UART_OFFSET (0x400)
+
+#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
+#define VA_VIC0 VA_VIC(0)
+#define VA_VIC1 VA_VIC(1)
+#define VA_VIC2 VA_VIC(2)
+#define VA_VIC3 VA_VIC(3)
+
+#endif /* __ASM_PLAT_MAP_S5P_H */
diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h
index e1a7444..56fb8b4 100644
--- a/arch/arm/plat-s5p/include/plat/s5p-clock.h
+++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h
@@ -20,6 +20,7 @@
#define clk_fin_apll clk_ext_xtal_mux
#define clk_fin_mpll clk_ext_xtal_mux
#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_vpll clk_ext_xtal_mux
extern struct clk clk_ext_xtal_mux;
extern struct clk clk_48m;
@@ -27,6 +28,7 @@
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_epll;
extern struct clk clk_arm;
+extern struct clk clk_vpll;
extern struct clksrc_sources clk_src_apll;
extern struct clksrc_sources clk_src_mpll;
diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h
new file mode 100644
index 0000000..7b88013
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5p6442.h
@@ -0,0 +1,33 @@
+/* arch/arm/plat-s5p/include/plat/s5p6442.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5p6442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5P6442 related SoCs */
+
+extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5p6442_register_clocks(void);
+extern void s5p6442_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5P6442
+
+extern int s5p6442_init(void);
+extern void s5p6442_init_irq(void);
+extern void s5p6442_map_io(void);
+extern void s5p6442_init_clocks(int xtal);
+
+#define s5p6442_init_uarts s5p6442_common_init_uarts
+
+#else
+#define s5p6442_init_clocks NULL
+#define s5p6442_init_uarts NULL
+#define s5p6442_map_io NULL
+#define s5p6442_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h
new file mode 100644
index 0000000..6c93a0c
--- /dev/null
+++ b/arch/arm/plat-s5p/include/plat/s5pv210.h
@@ -0,0 +1,33 @@
+/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for s5pv210 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PV210 related SoCs */
+
+extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pv210_register_clocks(void);
+extern void s5pv210_setup_clocks(void);
+
+#ifdef CONFIG_CPU_S5PV210
+
+extern int s5pv210_init(void);
+extern void s5pv210_init_irq(void);
+extern void s5pv210_map_io(void);
+extern void s5pv210_init_clocks(int xtal);
+
+#define s5pv210_init_uarts s5pv210_common_init_uarts
+
+#else
+#define s5pv210_init_clocks NULL
+#define s5pv210_init_uarts NULL
+#define s5pv210_map_io NULL
+#define s5pv210_init NULL
+#endif
diff --git a/arch/arm/plat-s5p/irq.c b/arch/arm/plat-s5p/irq.c
index eada40d..25e1eb6 100644
--- a/arch/arm/plat-s5p/irq.c
+++ b/arch/arm/plat-s5p/irq.c
@@ -25,9 +25,6 @@
#include <plat/irq-vic-timer.h>
#include <plat/irq-uart.h>
-#define VIC_VAADDR(no) (S5P_VA_VIC0 + ((no)*0x10000))
-#define VIC_BASE(no) (S5P_VIC0_BASE + ((no)*32))
-
/*
* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
* are consecutive when looking up the interrupt in the demux routines.
@@ -48,11 +45,13 @@
.base_irq = IRQ_S5P_UART_BASE2,
.parent_irq = IRQ_UART2,
},
+#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[3] = {
.regs = S5P_VA_UART3,
.base_irq = IRQ_S5P_UART_BASE3,
.parent_irq = IRQ_UART3,
},
+#endif
};
void __init s5p_init_irq(u32 *vic, u32 num_vic)
@@ -61,7 +60,7 @@
/* initialize the VICs */
for (irq = 0; irq < num_vic; irq++)
- vic_init(VIC_VAADDR(irq), VIC_BASE(irq), vic[irq], 0);
+ vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
s3c_init_vic_timer_irq(IRQ_TIMER0_VIC, IRQ_TIMER0);
s3c_init_vic_timer_irq(IRQ_TIMER1_VIC, IRQ_TIMER1);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 1c2fe91..d552c65 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -7,12 +7,50 @@
config PLAT_SAMSUNG
bool
depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+ select NO_IOPORT
default y
help
Base platform code for all Samsung SoC based systems
if PLAT_SAMSUNG
+# boot configurations
+
+comment "Boot options"
+
+config S3C_BOOT_WATCHDOG
+ bool "S3C Initialisation watchdog"
+ depends on S3C2410_WATCHDOG
+ help
+ Say y to enable the watchdog during the kernel decompression
+ stage. If the kernel fails to uncompress, then the watchdog
+ will trigger a reset and the system should restart.
+
+config S3C_BOOT_ERROR_RESET
+ bool "S3C Reboot on decompression error"
+ help
+ Say y here to use the watchdog to reset the system if the
+ kernel decompressor detects an error during decompression.
+
+config S3C_BOOT_UART_FORCE_FIFO
+ bool "Force UART FIFO on during boot process"
+ default y
+ help
+ Say Y here to force the UART FIFOs on during the kernel
+ uncompressor
+
+
+config S3C_LOWLEVEL_UART_PORT
+ int "S3C UART to use for low-level messages"
+ default 0
+ help
+ Choice of which UART port to use for the low-level messages,
+ such as the `Uncompressing...` at start time. The value of
+ this configuration should be between zero and two. The port
+ must have been initialised by the boot-loader before use.
+
+# clock options
+
config SAMSUNG_CLKSRC
bool
help
@@ -81,6 +119,21 @@
provides. This allows expanding the GPIO space for use with
GPIO expanders.
+config S3C_GPIO_SPACE
+ int "Space between gpio banks"
+ default 0
+ help
+ Add a number of spare GPIO entries between each bank for debugging
+ purposes. This allows any problems where an counter overflows from
+ one bank to another to be caught, at the expense of using a little
+ more memory.
+
+config S3C_GPIO_TRACK
+ bool
+ help
+ Internal configuration option to enable the s3c specific gpio
+ chip tracking if the platform requires it.
+
# ADC driver
config S3C_ADC
@@ -132,6 +185,19 @@
help
Compile in platform device definition for NAND controller
+config S3C64XX_DEV_SPI
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controllers.
+
+# DMA
+
+config S3C_DMA
+ bool
+ help
+ Internal configuration for S3C DMA core
+
comment "Power management"
config SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index c8c8cae..22c89d0 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,6 +11,8 @@
# Objects we always build independent of SoC choice
+obj-y += init.o
+obj-y += time.o
obj-y += clock.o
obj-y += pwm-clock.o
obj-y += gpio.o
@@ -39,8 +41,13 @@
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
+# DMA support
+
+obj-$(CONFIG_S3C_DMA) += dma.o
+
# PM support
+obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index c7659b7..0b5833b 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -262,6 +262,7 @@
{
struct adc_device *adc = pw;
struct s3c_adc_client *client = adc->cur;
+ enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data;
unsigned long flags;
unsigned data0, data1;
@@ -276,9 +277,17 @@
client->nr_samples--;
+ if (cpu == TYPE_S3C64XX) {
+ /* S3C64XX ADC resolution is 12-bit */
+ data0 &= 0xfff;
+ data1 &= 0xfff;
+ } else {
+ data0 &= 0x3ff;
+ data1 &= 0x3ff;
+ }
+
if (client->convert_cb)
- (client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
- &client->nr_samples);
+ (client->convert_cb)(client, data0, data1, &client->nr_samples);
if (client->nr_samples > 0) {
/* fire another conversion for this */
@@ -295,7 +304,7 @@
}
exit:
- if (platform_get_device_id(adc->pdev)->driver_data == TYPE_S3C64XX) {
+ if (cpu == TYPE_S3C64XX) {
/* Clear ADC interrupt */
writel(0, adc->regs + S3C64XX_ADCCLRINT);
}
@@ -308,6 +317,7 @@
struct adc_device *adc;
struct resource *regs;
int ret;
+ unsigned tmp;
adc = kzalloc(sizeof(struct adc_device), GFP_KERNEL);
if (adc == NULL) {
@@ -354,8 +364,12 @@
clk_enable(adc->clk);
- writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
- adc->regs + S3C2410_ADCCON);
+ tmp = adc->prescale | S3C2410_ADCCON_PRSCEN;
+ if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) {
+ /* Enable 12-bit ADC resolution */
+ tmp |= S3C64XX_ADCCON_RESSEL;
+ }
+ writel(tmp, adc->regs + S3C2410_ADCCON);
dev_info(dev, "attached adc driver\n");
@@ -398,6 +412,7 @@
con |= S3C2410_ADCCON_STDBM;
writel(con, adc->regs + S3C2410_ADCCON);
+ disable_irq(adc->irq);
clk_disable(adc->clk);
return 0;
@@ -408,6 +423,7 @@
struct adc_device *adc = platform_get_drvdata(pdev);
clk_enable(adc->clk);
+ enable_irq(adc->irq);
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index e9cdbe4..1b25c9d 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -307,6 +307,12 @@
/* initialise the clock system */
+/**
+ * s3c24xx_register_clock() - register a clock
+ * @clk: The clock to register
+ *
+ * Add the specified clock to the list of clocks known by the system.
+ */
int s3c24xx_register_clock(struct clk *clk)
{
if (clk->enable == NULL)
@@ -324,13 +330,25 @@
return 0;
}
+/**
+ * s3c24xx_register_clocks() - register an array of clock pointers
+ * @clks: Pointer to an array of struct clk pointers
+ * @nr_clks: The number of clocks in the @clks array.
+ *
+ * Call s3c24xx_register_clock() for all the clock pointers contained
+ * in the @clks list. Returns the number of failures.
+ */
int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
{
int fails = 0;
for (; nr_clks > 0; nr_clks--, clks++) {
- if (s3c24xx_register_clock(*clks) < 0)
+ if (s3c24xx_register_clock(*clks) < 0) {
+ struct clk *clk = *clks;
+ printk(KERN_ERR "%s: failed to register %p: %s\n",
+ __func__, clk, clk->name);
fails++;
+ }
}
return fails;
diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
index e2f604b..33a844a 100644
--- a/arch/arm/plat-samsung/dev-usb-hsotg.c
+++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -33,9 +34,15 @@
},
};
+static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
+
struct platform_device s3c_device_usb_hsotg = {
.name = "s3c-hsotg",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
.resource = s3c_usb_hsotg_resources,
+ .dev = {
+ .dma_mask = &s3c_hsotg_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
};
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-samsung/dma.c
similarity index 96%
rename from arch/arm/plat-s3c/dma.c
rename to arch/arm/plat-samsung/dma.c
index a995850..cb459dd 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-samsung/dma.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/dma.c
+/* linux/arch/arm/plat-samsung/dma.c
*
* Copyright (c) 2003-2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -20,8 +20,6 @@
#include <mach/dma.h>
#include <mach/irqs.h>
-#include <plat/dma-plat.h>
-
/* dma channel state information */
struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
similarity index 64%
rename from arch/arm/plat-s3c/include/plat/audio.h
rename to arch/arm/plat-samsung/include/plat/audio.h
index f22d23b..e32f9ed 100644
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/audio.h
+/* arch/arm/plat-samsung/include/plat/audio.h
*
* Copyright (c) 2009 Samsung Electronics Co. Ltd
* Author: Jaswinder Singh <jassi.brar@samsung.com>
@@ -8,6 +8,14 @@
* published by the Free Software Foundation.
*/
+/* The machine init code calls s3c*_ac97_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for AC97 pins
+ */
+#define S3C64XX_AC97_GPD 0
+#define S3C64XX_AC97_GPE 1
+extern void s3c64xx_ac97_setup_gpio(int);
+
/**
* struct s3c_audio_pdata - common platform data for audio device drivers
* @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index ba9a1cd..60b6269 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -94,7 +94,6 @@
extern int s3c24xx_register_baseclocks(unsigned long xtal);
-extern void s3c64xx_register_clocks(void);
extern void s5p_register_clocks(unsigned long xtal_freq);
extern void s3c24xx_setup_clocks(unsigned long fclk,
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-samsung/include/plat/cpu-freq.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/cpu-freq.h
rename to arch/arm/plat-samsung/include/plat/cpu-freq.h
index 94eb06a..80c4a80 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+/* arch/arm/plat-samsung/include/plat/cpu-freq.h
*
* Copyright (c) 2006-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
similarity index 97%
rename from arch/arm/plat-s3c/include/plat/cpu.h
rename to arch/arm/plat-samsung/include/plat/cpu.h
index 676db94..d316b4a 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/cpu.h
+/* linux/arch/arm/plat-samsung/include/plat/cpu.h
*
* Copyright (c) 2004-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S
similarity index 81%
rename from arch/arm/plat-s3c/include/plat/debug-macro.S
rename to arch/arm/plat-samsung/include/plat/debug-macro.S
index 3634d4e..dc6efd9 100644
--- a/arch/arm/plat-s3c/include/plat/debug-macro.S
+++ b/arch/arm/plat-samsung/include/plat/debug-macro.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/debug-macro.S
+/* arch/arm/plat-samsung/include/plat/debug-macro.S
*
* Copyright 2005, 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
@@ -11,6 +11,18 @@
#include <plat/regs-serial.h>
+/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */
+
+ .macro fifo_level_s5pv210 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ and \rd, \rd, #S5PV210_UFSTAT_TXMASK
+ .endm
+
+ .macro fifo_full_s5pv210 rd, rx
+ ldr \rd, [ \rx, # S3C2410_UFSTAT ]
+ tst \rd, #S5PV210_UFSTAT_TXFULL
+ .endm
+
/* The S3C2440 implementations are used by default as they are the
* most widely re-used */
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
similarity index 95%
rename from arch/arm/plat-s3c/include/plat/devs.h
rename to arch/arm/plat-samsung/include/plat/devs.h
index c6f9b73..796d242 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/devs.h
+/* arch/arm/plat-samsung/include/plat/devs.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
@@ -35,7 +35,10 @@
extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
+extern struct platform_device s3c64xx_device_ac97;
+
extern struct platform_device s3c_device_ts;
+
extern struct platform_device s3c_device_fb;
extern struct platform_device s3c_device_ohci;
extern struct platform_device s3c_device_lcd;
diff --git a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
similarity index 94%
rename from arch/arm/plat-s3c24xx/include/plat/dma-plat.h
rename to arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index 9565ead..336d5ac 100644
--- a/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -1,9 +1,9 @@
-/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
+/* linux/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C24XX DMA support
+ * Samsung S3C24XX DMA support - per SoC functions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/dma.h
rename to arch/arm/plat-samsung/include/plat/dma.h
index e429d10..7584d75 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-samsung/include/plat/dma.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/dma.h
+/* arch/arm/plat-samsung/include/plat/dma.h
*
* Copyright (C) 2003-2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h
similarity index 97%
rename from arch/arm/plat-s3c/include/plat/fb.h
rename to arch/arm/plat-samsung/include/plat/fb.h
index f8db879..ffc01a7 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-samsung/include/plat/fb.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c/include/plat/fb.h
+/* arch/arm/plat-samsung/include/plat/fb.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
similarity index 100%
rename from arch/arm/plat-s3c/include/plat/map-base.h
rename to arch/arm/plat-samsung/include/plat/map-base.h
diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/pm.h
rename to arch/arm/plat-samsung/include/plat/pm.h
index 2543bd2..245836d 100644
--- a/arch/arm/plat-s3c/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c24xx/pm.h
+/* arch/arm/plat-samsung/include/plat/pm.h
*
* Copyright (c) 2004 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h
index f43c8da..7554c4f 100644
--- a/arch/arm/plat-samsung/include/plat/regs-adc.h
+++ b/arch/arm/plat-samsung/include/plat/regs-adc.h
@@ -25,6 +25,7 @@
/* ADCCON Register Bits */
+#define S3C64XX_ADCCON_RESSEL (1<<16)
#define S3C2410_ADCCON_ECFLG (1<<15)
#define S3C2410_ADCCON_PRSCEN (1<<14)
#define S3C2410_ADCCON_PRSCVL(x) (((x)&0xFF)<<6)
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/regs-fb-v4.h
rename to arch/arm/plat-samsung/include/plat/regs-fb-v4.h
index a60ed0d..0f43599 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb-v4.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+/* arch/arm/plat-samsung/include/plat/regs-fb-v4.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
similarity index 99%
rename from arch/arm/plat-s3c/include/plat/regs-fb.h
rename to arch/arm/plat-samsung/include/plat/regs-fb.h
index e9ee599..0ef806e 100644
--- a/arch/arm/plat-s3c/include/plat/regs-fb.h
+++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/regs-fb.h
+/* arch/arm/plat-samsung/include/plat/regs-fb.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
similarity index 99%
rename from arch/arm/plat-s3c/include/plat/regs-serial.h
rename to arch/arm/plat-samsung/include/plat/regs-serial.h
index 60d6604..a6eba84 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -1,4 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-serial.h
+/* arch/arm/plat-samsung/include/plat/regs-serial.h
*
* From linux/include/asm-arm/hardware/serial_s3c2410.h
*
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 5319867..7d07cd7 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -78,8 +78,8 @@
/* S3C6400 SDHCI setup */
-#ifdef CONFIG_S3C6400_SETUP_SDHCI
-extern char *s3c6400_hsmmc_clksrcs[4];
+#ifdef CONFIG_S3C64XX_SETUP_SDHCI
+extern char *s3c64xx_hsmmc_clksrcs[4];
#ifdef CONFIG_S3C_DEV_HSMMC
extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
@@ -89,7 +89,7 @@
static inline void s3c6400_default_sdhci0(void)
{
- s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
@@ -101,7 +101,7 @@
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6400_default_sdhci1(void)
{
- s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
@@ -112,7 +112,7 @@
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6400_default_sdhci2(void)
{
- s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
}
@@ -120,27 +120,19 @@
static inline void s3c6400_default_sdhci2(void) { }
#endif /* CONFIG_S3C_DEV_HSMMC2 */
-#else
-static inline void s3c6400_default_sdhci0(void) { }
-static inline void s3c6400_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6400_SETUP_SDHCI */
-
/* S3C6410 SDHCI setup */
-#ifdef CONFIG_S3C6410_SETUP_SDHCI
-extern char *s3c6410_hsmmc_clksrcs[4];
-
-extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
+extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
#ifdef CONFIG_S3C_DEV_HSMMC
static inline void s3c6410_default_sdhci0(void)
{
- s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+ s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
}
#else
static inline void s3c6410_default_sdhci0(void) { }
@@ -149,9 +141,9 @@
#ifdef CONFIG_S3C_DEV_HSMMC1
static inline void s3c6410_default_sdhci1(void)
{
- s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+ s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
}
#else
static inline void s3c6410_default_sdhci1(void) { }
@@ -160,9 +152,9 @@
#ifdef CONFIG_S3C_DEV_HSMMC2
static inline void s3c6410_default_sdhci2(void)
{
- s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+ s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+ s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
}
#else
static inline void s3c6410_default_sdhci2(void) { }
@@ -171,7 +163,10 @@
#else
static inline void s3c6410_default_sdhci0(void) { }
static inline void s3c6410_default_sdhci1(void) { }
-#endif /* CONFIG_S3C6410_SETUP_SDHCI */
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
/* S5PC100 SDHCI setup */
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
similarity index 98%
rename from arch/arm/plat-s3c/include/plat/uncompress.h
rename to arch/arm/plat-samsung/include/plat/uncompress.h
index dc66a47..e87ce8f 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/plat-s3c/uncompress.h
+/* arch/arm/plat-samsung/include/plat/uncompress.h
*
* Copyright 2003, 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c/include/plat/usb-control.h b/arch/arm/plat-samsung/include/plat/usb-control.h
similarity index 94%
rename from arch/arm/plat-s3c/include/plat/usb-control.h
rename to arch/arm/plat-samsung/include/plat/usb-control.h
index a6a57bf..7fa1fbe 100644
--- a/arch/arm/plat-s3c/include/plat/usb-control.h
+++ b/arch/arm/plat-samsung/include/plat/usb-control.h
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/include/plat/usb-control.h
+/* arch/arm/plat-samsung/include/plat/usb-control.h
*
* Copyright (c) 2004 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-samsung/init.c
similarity index 100%
rename from arch/arm/plat-s3c/init.c
rename to arch/arm/plat-samsung/init.c
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-samsung/pm.c
similarity index 99%
rename from arch/arm/plat-s3c/pm.c
rename to arch/arm/plat-samsung/pm.c
index e5eef126..27cfca5 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -29,7 +29,7 @@
#include <asm/irq.h>
#include <plat/pm.h>
-#include <plat/pm-core.h>
+#include <mach/pm-core.h>
/* for external use */
diff --git a/arch/arm/plat-s3c/time.c b/arch/arm/plat-samsung/time.c
similarity index 99%
rename from arch/arm/plat-s3c/time.c
rename to arch/arm/plat-samsung/time.c
index 3b27b29..2231d80 100644
--- a/arch/arm/plat-s3c/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/time.c
+/* linux/arch/arm/plat-samsung/time.c
*
* Copyright (C) 2003-2005 Simtec Electronics
* Ben Dooks, <ben@simtec.co.uk>
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index df62f4e..5351848 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@
provide all of these ports, depending on how the serial port
pins are configured.
+config SERIAL_SAMSUNG_UARTS_4
+ bool
+ depends on ARM && PLAT_SAMSUNG
+ default y if CPU_S3C2443
+ help
+ Internal node for the common case of 4 Samsung compatible UARTs
+
config SERIAL_SAMSUNG_UARTS
int
- depends on ARM && PLAT_S3C
+ depends on ARM && PLAT_SAMSUNG
default 2 if ARCH_S3C2400
- default 4 if ARCH_S5P6440 || ARCH_S5PC1XX || ARCH_S5PV210 || ARCH_S3C64XX || CPU_S3C2443
+ default 4 if SERIAL_SAMSUNG_UARTS_4
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -526,8 +533,9 @@
Serial port support for the Samsung S3C24A0 SoC
config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440 Serial port support"
+ tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+ select SERIAL_SAMSUNG_UARTS_4
default y
help
Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
@@ -536,13 +544,15 @@
config SERIAL_S5PC100
tristate "Samsung S5PC100 Serial port support"
depends on SERIAL_SAMSUNG && CPU_S5PC100
+ select SERIAL_SAMSUNG_UARTS_4
default y
help
Serial port support for the Samsung S5PC100 SoCs
config SERIAL_S5PV210
tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S5PV210
+ depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+ select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
default y
help
Serial port support for Samsung's S5P Family of SoC's
diff --git a/drivers/serial/s3c2412.c b/drivers/serial/s3c2412.c
index ce75e28..1700b1a 100644
--- a/drivers/serial/s3c2412.c
+++ b/drivers/serial/s3c2412.c
@@ -102,6 +102,7 @@
.name = "Samsung S3C2412 UART",
.type = PORT_S3C2412,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,