| /* drivers/tty/smux_test.c |
| * |
| * Copyright (c) 2012, Code Aurora Forum. All rights reserved. |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <linux/debugfs.h> |
| #include <linux/list.h> |
| #include <linux/ctype.h> |
| #include <linux/jiffies.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/completion.h> |
| #include <linux/termios.h> |
| #include <linux/smux.h> |
| #include "smux_private.h" |
| |
| #define DEBUG_BUFMAX 4096 |
| |
| /** |
| * Unit test assertion for logging test cases. |
| * |
| * @a lval |
| * @b rval |
| * @cmp comparison operator |
| * |
| * Assertion fails if (@a cmp @b) is not true which then |
| * logs the function and line number where the error occurred |
| * along with the values of @a and @b. |
| * |
| * Assumes that the following local variables exist: |
| * @buf - buffer to write failure message to |
| * @i - number of bytes written to buffer |
| * @max - maximum size of the buffer |
| * @failed - set to true if test fails |
| */ |
| #define UT_ASSERT_INT(a, cmp, b) \ |
| if (!((a)cmp(b))) { \ |
| i += scnprintf(buf + i, max - i, \ |
| "%s:%d Fail: " #a "(%d) " #cmp " " #b "(%d)\n", \ |
| __func__, __LINE__, \ |
| a, b); \ |
| failed = 1; \ |
| break; \ |
| } \ |
| do {} while (0) |
| |
| #define UT_ASSERT_PTR(a, cmp, b) \ |
| if (!((a)cmp(b))) { \ |
| i += scnprintf(buf + i, max - i, \ |
| "%s:%d Fail: " #a "(%p) " #cmp " " #b "(%p)\n", \ |
| __func__, __LINE__, \ |
| a, b); \ |
| failed = 1; \ |
| break; \ |
| } \ |
| do {} while (0) |
| |
| #define UT_ASSERT_UINT(a, cmp, b) \ |
| if (!((a)cmp(b))) { \ |
| i += scnprintf(buf + i, max - i, \ |
| "%s:%d Fail: " #a "(%u) " #cmp " " #b "(%u)\n", \ |
| __func__, __LINE__, \ |
| a, b); \ |
| failed = 1; \ |
| break; \ |
| } \ |
| do {} while (0) |
| |
| /** |
| * In-range unit test assertion for test cases. |
| * |
| * @a lval |
| * @minv Minimum value |
| * @maxv Maximum value |
| * |
| * Assertion fails if @a is not on the exclusive range minv, maxv |
| * ((@a < @minv) or (@a > @maxv)). In the failure case, the macro |
| * logs the function and line number where the error occurred along |
| * with the values of @a and @minv, @maxv. |
| * |
| * Assumes that the following local variables exist: |
| * @buf - buffer to write failure message to |
| * @i - number of bytes written to buffer |
| * @max - maximum size of the buffer |
| * @failed - set to true if test fails |
| */ |
| #define UT_ASSERT_INT_IN_RANGE(a, minv, maxv) \ |
| if (((a) < (minv)) || ((a) > (maxv))) { \ |
| i += scnprintf(buf + i, max - i, \ |
| "%s:%d Fail: " #a "(%d) < " #minv "(%d) or " \ |
| #a "(%d) > " #maxv "(%d)\n", \ |
| __func__, __LINE__, \ |
| a, minv, a, maxv); \ |
| failed = 1; \ |
| break; \ |
| } \ |
| do {} while (0) |
| |
| |
| static unsigned char test_array[] = {1, 1, 2, 3, 5, 8, 13, 21, 34, 55, |
| 89, 144, 233}; |
| |
| /* when 1, forces failure of get_rx_buffer_mock function */ |
| static int get_rx_buffer_mock_fail; |
| |
| |
| /* Used for mapping local to remote TIOCM signals */ |
| struct tiocm_test_vector { |
| uint32_t input; |
| uint32_t set_old; |
| uint32_t set_new; |
| uint32_t clr_old; |
| }; |
| |
| /** |
| * Allocates a new buffer for SMUX for every call. |
| */ |
| int get_rx_buffer(void *priv, void **pkt_priv, void **buffer, int size) |
| { |
| void *rx_buf; |
| |
| rx_buf = kmalloc(size, GFP_KERNEL); |
| *pkt_priv = (void *)0x1234; |
| *buffer = rx_buf; |
| |
| return 0; |
| } |
| |
| /* Test vector for packet tests. */ |
| struct test_vector { |
| const char *data; |
| const unsigned len; |
| }; |
| |
| /* Mock object metadata for SMUX_READ_DONE event */ |
| struct mock_read_event { |
| struct list_head list; |
| struct smux_meta_read meta; |
| }; |
| |
| /* Mock object metadata for SMUX_WRITE_DONE event */ |
| struct mock_write_event { |
| struct list_head list; |
| struct smux_meta_write meta; |
| }; |
| |
| /* Mock object metadata for get_rx_buffer failure event */ |
| struct mock_get_rx_buff_event { |
| struct list_head list; |
| int size; |
| unsigned long jiffies; |
| }; |
| |
| /* Mock object for all SMUX callback events */ |
| struct smux_mock_callback { |
| int cb_count; |
| struct completion cb_completion; |
| spinlock_t lock; |
| |
| /* status changes */ |
| int event_connected; |
| int event_disconnected; |
| int event_disconnected_ssr; |
| int event_low_wm; |
| int event_high_wm; |
| |
| /* TIOCM changes */ |
| int event_tiocm; |
| struct smux_meta_tiocm tiocm_meta; |
| |
| /* read event data */ |
| int event_read_done; |
| int event_read_failed; |
| struct list_head read_events; |
| |
| /* read retry data */ |
| int get_rx_buff_retry_count; |
| struct list_head get_rx_buff_retry_events; |
| |
| /* write event data */ |
| int event_write_done; |
| int event_write_failed; |
| struct list_head write_events; |
| }; |
| |
| /** |
| * Initialize mock callback data. Only call once. |
| * |
| * @cb Mock callback data |
| */ |
| void mock_cb_data_init(struct smux_mock_callback *cb) |
| { |
| init_completion(&cb->cb_completion); |
| spin_lock_init(&cb->lock); |
| INIT_LIST_HEAD(&cb->read_events); |
| INIT_LIST_HEAD(&cb->get_rx_buff_retry_events); |
| INIT_LIST_HEAD(&cb->write_events); |
| } |
| |
| /** |
| * Reset mock callback data to default values. |
| * |
| * @cb Mock callback data |
| * |
| * All packets are freed and counters reset to zero. |
| */ |
| void mock_cb_data_reset(struct smux_mock_callback *cb) |
| { |
| cb->cb_count = 0; |
| INIT_COMPLETION(cb->cb_completion); |
| cb->event_connected = 0; |
| cb->event_disconnected = 0; |
| cb->event_disconnected_ssr = 0; |
| cb->event_low_wm = 0; |
| cb->event_high_wm = 0; |
| cb->event_tiocm = 0; |
| cb->tiocm_meta.tiocm_old = 0; |
| cb->tiocm_meta.tiocm_new = 0; |
| |
| cb->event_read_done = 0; |
| cb->event_read_failed = 0; |
| while (!list_empty(&cb->read_events)) { |
| struct mock_read_event *meta; |
| meta = list_first_entry(&cb->read_events, |
| struct mock_read_event, |
| list); |
| kfree(meta->meta.buffer); |
| list_del(&meta->list); |
| kfree(meta); |
| } |
| |
| cb->get_rx_buff_retry_count = 0; |
| while (!list_empty(&cb->get_rx_buff_retry_events)) { |
| struct mock_get_rx_buff_event *meta; |
| meta = list_first_entry(&cb->get_rx_buff_retry_events, |
| struct mock_get_rx_buff_event, |
| list); |
| list_del(&meta->list); |
| kfree(meta); |
| } |
| |
| cb->event_write_done = 0; |
| cb->event_write_failed = 0; |
| while (!list_empty(&cb->write_events)) { |
| struct mock_write_event *meta; |
| meta = list_first_entry(&cb->write_events, |
| struct mock_write_event, |
| list); |
| list_del(&meta->list); |
| kfree(meta); |
| } |
| } |
| |
| /** |
| * Dump the values of the mock callback data for debug purposes. |
| * |
| * @cb Mock callback data |
| * @buf Print buffer |
| * @max Maximum number of characters to print |
| * |
| * @returns Number of characters added to buffer |
| */ |
| static int mock_cb_data_print(const struct smux_mock_callback *cb, |
| char *buf, int max) |
| { |
| int i = 0; |
| |
| i += scnprintf(buf + i, max - i, |
| "\tcb_count=%d\n" |
| "\tcb_completion.done=%d\n" |
| "\tevent_connected=%d\n" |
| "\tevent_disconnected=%d\n" |
| "\tevent_disconnected_ssr=%d\n" |
| "\tevent_low_wm=%d\n" |
| "\tevent_high_wm=%d\n" |
| "\tevent_tiocm=%d\n" |
| "\tevent_read_done=%d\n" |
| "\tevent_read_failed=%d\n" |
| "\tread_events empty=%d\n" |
| "\tget_rx_retry=%d\n" |
| "\tget_rx_retry_events empty=%d\n" |
| "\tevent_write_done=%d\n" |
| "\tevent_write_failed=%d\n" |
| "\twrite_events empty=%d\n", |
| cb->cb_count, |
| cb->cb_completion.done, |
| cb->event_connected, |
| cb->event_disconnected, |
| cb->event_disconnected_ssr, |
| cb->event_low_wm, |
| cb->event_high_wm, |
| cb->event_tiocm, |
| cb->event_read_done, |
| cb->event_read_failed, |
| list_empty(&cb->read_events), |
| cb->get_rx_buff_retry_count, |
| list_empty(&cb->get_rx_buff_retry_events), |
| cb->event_write_done, |
| cb->event_write_failed, |
| list_empty(&cb->write_events) |
| ); |
| |
| return i; |
| } |
| |
| /** |
| * Mock object event callback. Used to logs events for analysis in the unit |
| * tests. |
| */ |
| void smux_mock_cb(void *priv, int event, const void *metadata) |
| { |
| struct smux_mock_callback *cb_data_ptr; |
| struct mock_write_event *write_event_meta; |
| struct mock_read_event *read_event_meta; |
| unsigned long flags; |
| |
| cb_data_ptr = (struct smux_mock_callback *)priv; |
| if (cb_data_ptr == NULL) { |
| pr_err("%s: invalid private data\n", __func__); |
| return; |
| } |
| |
| switch (event) { |
| case SMUX_CONNECTED: |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_connected; |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_DISCONNECTED: |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_disconnected; |
| cb_data_ptr->event_disconnected_ssr = |
| ((struct smux_meta_disconnected *)metadata)->is_ssr; |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_READ_DONE: |
| read_event_meta = kmalloc(sizeof(struct mock_read_event), |
| GFP_KERNEL); |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_read_done; |
| if (read_event_meta) { |
| read_event_meta->meta = |
| *(struct smux_meta_read *)metadata; |
| list_add_tail(&read_event_meta->list, |
| &cb_data_ptr->read_events); |
| } |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_READ_FAIL: |
| read_event_meta = kmalloc(sizeof(struct mock_read_event), |
| GFP_KERNEL); |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_read_failed; |
| if (read_event_meta) { |
| if (metadata) |
| read_event_meta->meta = |
| *(struct smux_meta_read *)metadata; |
| else |
| memset(&read_event_meta->meta, 0x0, |
| sizeof(struct smux_meta_read)); |
| list_add_tail(&read_event_meta->list, |
| &cb_data_ptr->read_events); |
| } |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_WRITE_DONE: |
| write_event_meta = kmalloc(sizeof(struct mock_write_event), |
| GFP_KERNEL); |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_write_done; |
| if (write_event_meta) { |
| write_event_meta->meta = |
| *(struct smux_meta_write *)metadata; |
| list_add_tail(&write_event_meta->list, |
| &cb_data_ptr->write_events); |
| } |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_WRITE_FAIL: |
| write_event_meta = kmalloc(sizeof(struct mock_write_event), |
| GFP_KERNEL); |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_write_failed; |
| if (write_event_meta) { |
| write_event_meta->meta = |
| *(struct smux_meta_write *)metadata; |
| list_add_tail(&write_event_meta->list, |
| &cb_data_ptr->write_events); |
| } |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_LOW_WM_HIT: |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_low_wm; |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_HIGH_WM_HIT: |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_high_wm; |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| case SMUX_TIOCM_UPDATE: |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->event_tiocm; |
| cb_data_ptr->tiocm_meta = *(struct smux_meta_tiocm *)metadata; |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| break; |
| |
| default: |
| pr_err("%s: unknown event %d\n", __func__, event); |
| }; |
| |
| spin_lock_irqsave(&cb_data_ptr->lock, flags); |
| ++cb_data_ptr->cb_count; |
| complete(&cb_data_ptr->cb_completion); |
| spin_unlock_irqrestore(&cb_data_ptr->lock, flags); |
| } |
| |
| /** |
| * Test Read/write usage. |
| * |
| * @buf Output buffer for failure/status messages |
| * @max Size of @buf |
| * @vectors Test vector data (must end with NULL item) |
| * @name Name of the test case for failure messages |
| * |
| * Perform a sanity test consisting of opening a port, writing test packet(s), |
| * reading the response(s), and closing the port. |
| * |
| * The port should already be configured to use either local or remote |
| * loopback. |
| */ |
| static int smux_ut_basic_core(char *buf, int max, |
| const struct test_vector *vectors, |
| const char *name) |
| { |
| int i = 0; |
| int failed = 0; |
| static struct smux_mock_callback cb_data; |
| static int cb_initialized; |
| int ret; |
| |
| if (!cb_initialized) |
| mock_cb_data_init(&cb_data); |
| |
| mock_cb_data_reset(&cb_data); |
| while (!failed) { |
| struct mock_write_event *write_event; |
| struct mock_read_event *read_event; |
| |
| /* open port */ |
| ret = msm_smux_open(SMUX_TEST_LCID, &cb_data, smux_mock_cb, |
| get_rx_buffer); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_connected, ==, 1); |
| mock_cb_data_reset(&cb_data); |
| |
| /* write, read, and verify the test vector data */ |
| for (; vectors->data != NULL; ++vectors) { |
| const char *test_data = vectors->data; |
| const unsigned test_len = vectors->len; |
| |
| i += scnprintf(buf + i, max - i, |
| "Writing vector %p len %d\n", |
| test_data, test_len); |
| |
| /* write data */ |
| msm_smux_write(SMUX_TEST_LCID, (void *)0xCAFEFACE, |
| test_data, test_len); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| |
| /* wait for write and echo'd read to complete */ |
| INIT_COMPLETION(cb_data.cb_completion); |
| if (cb_data.cb_count < 2) |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| |
| UT_ASSERT_INT(cb_data.cb_count, >=, 1); |
| UT_ASSERT_INT(cb_data.event_write_done, ==, 1); |
| UT_ASSERT_INT(list_empty(&cb_data.write_events), ==, 0); |
| |
| write_event = list_first_entry(&cb_data.write_events, |
| struct mock_write_event, list); |
| UT_ASSERT_PTR(write_event->meta.pkt_priv, ==, |
| (void *)0xCAFEFACE); |
| UT_ASSERT_PTR(write_event->meta.buffer, ==, |
| (void *)test_data); |
| UT_ASSERT_INT(write_event->meta.len, ==, test_len); |
| |
| /* verify read event */ |
| UT_ASSERT_INT(cb_data.event_read_done, ==, 1); |
| UT_ASSERT_INT(list_empty(&cb_data.read_events), ==, 0); |
| read_event = list_first_entry(&cb_data.read_events, |
| struct mock_read_event, list); |
| UT_ASSERT_PTR(read_event->meta.pkt_priv, ==, |
| (void *)0x1234); |
| UT_ASSERT_PTR(read_event->meta.buffer, !=, NULL); |
| |
| if (read_event->meta.len != test_len || |
| memcmp(read_event->meta.buffer, |
| test_data, test_len)) { |
| /* data mismatch */ |
| char linebuff[80]; |
| |
| hex_dump_to_buffer(test_data, test_len, |
| 16, 1, linebuff, sizeof(linebuff), 1); |
| i += scnprintf(buf + i, max - i, |
| "Expected:\n%s\n\n", linebuff); |
| |
| hex_dump_to_buffer(read_event->meta.buffer, |
| read_event->meta.len, |
| 16, 1, linebuff, sizeof(linebuff), 1); |
| i += scnprintf(buf + i, max - i, |
| "Actual:\n%s\n", linebuff); |
| failed = 1; |
| break; |
| } |
| mock_cb_data_reset(&cb_data); |
| } |
| |
| /* close port */ |
| ret = msm_smux_close(SMUX_TEST_LCID); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected_ssr, ==, 0); |
| break; |
| } |
| |
| if (!failed) { |
| i += scnprintf(buf + i, max - i, "\tOK\n"); |
| } else { |
| pr_err("%s: Failed\n", name); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| i += mock_cb_data_print(&cb_data, buf + i, max - i); |
| msm_smux_close(SMUX_TEST_LCID); |
| } |
| |
| mock_cb_data_reset(&cb_data); |
| return i; |
| } |
| |
| /** |
| * Verify Basic Local Loopback Support |
| * |
| * Perform a sanity test consisting of opening a port in local loopback |
| * mode and writing a packet and reading the echo'd packet back. |
| */ |
| static int smux_ut_basic(char *buf, int max) |
| { |
| const struct test_vector test_data[] = { |
| {"hello\0world\n", sizeof("hello\0world\n")}, |
| {0, 0}, |
| }; |
| int i = 0; |
| int failed = 0; |
| int ret; |
| |
| i += scnprintf(buf + i, max - i, "Running %s\n", __func__); |
| while (!failed) { |
| /* enable loopback mode */ |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_LOCAL_LOOPBACK, 0); |
| UT_ASSERT_INT(ret, ==, 0); |
| |
| i += smux_ut_basic_core(buf + i, max - i, test_data, __func__); |
| break; |
| } |
| |
| if (failed) { |
| pr_err("%s: Failed\n", __func__); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| } |
| return i; |
| } |
| |
| /** |
| * Verify Basic Remote Loopback Support |
| * |
| * Perform a sanity test consisting of opening a port in remote loopback |
| * mode and writing a packet and reading the echo'd packet back. |
| */ |
| static int smux_ut_remote_basic(char *buf, int max) |
| { |
| const struct test_vector test_data[] = { |
| {"hello\0world\n", sizeof("hello\0world\n")}, |
| {0, 0}, |
| }; |
| int i = 0; |
| int failed = 0; |
| int ret; |
| |
| i += scnprintf(buf + i, max - i, "Running %s\n", __func__); |
| while (!failed) { |
| /* enable remote mode */ |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_REMOTE_LOOPBACK, 0); |
| UT_ASSERT_INT(ret, ==, 0); |
| |
| i += smux_ut_basic_core(buf + i, max - i, test_data, __func__); |
| break; |
| } |
| |
| if (failed) { |
| pr_err("%s: Failed\n", __func__); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| } |
| return i; |
| } |
| |
| /** |
| * Fill test pattern into provided buffer including an optional |
| * redzone 16 bytes before and 16 bytes after the buffer. |
| * |
| * buf --------- |
| * redzone |
| * --------- <- returned pointer |
| * data |
| * --------- <- returned pointer + len |
| * redzone |
| * --------- |
| * |
| * @buf Pointer to the buffer of size len or len+32 (redzone) |
| * @len Length of the *data* buffer (excluding 32-byte redzone) |
| * @redzone If true, adds redzone data |
| * |
| * @returns pointer to buffer (buf + 16 if redzone enabled) |
| */ |
| uint8_t *test_pattern_fill(char *buf, int len, int redzone) |
| { |
| void *ret; |
| uint8_t ch; |
| |
| ret = buf; |
| if (redzone) { |
| memset((char *)buf, 0xAB, 16); |
| memset((char *)buf + len, 0xBA, 16); |
| ret += 16; |
| } |
| |
| /* fill with test pattern */ |
| for (ch = 0; len > 0; --len, ++ch) |
| *buf++ = (char)ch; |
| |
| return ret; |
| } |
| |
| /** |
| * Verify test pattern generated by test_pattern_fill. |
| * |
| * @buf_ptr Pointer to buffer pointer |
| * @len Length of the *data* buffer (excluding 32-byte redzone) |
| * @redzone If true, verifies redzone and adjusts *buf_ptr |
| * @errmsg Buffer for error message |
| * @errmsg_max Size of error message buffer |
| * |
| * @returns 0 for success; length of error message otherwise |
| */ |
| unsigned test_pattern_verify(char **buf_ptr, int len, int redzone, |
| char *errmsg, int errmsg_max) |
| { |
| int n; |
| int i = 0; |
| char linebuff[80]; |
| |
| if (redzone) { |
| *buf_ptr -= 16; |
| |
| /* verify prefix redzone */ |
| for (n = 0; n < 16; ++n) { |
| if (*buf_ptr[n] != 0xAB) { |
| hex_dump_to_buffer(*buf_ptr, 16, |
| 16, 1, linebuff, sizeof(linebuff), 1); |
| i += scnprintf(errmsg + i, errmsg_max - i, |
| "Redzone violation: %s\n", linebuff); |
| break; |
| } |
| } |
| |
| /* verify postfix redzone */ |
| for (n = 0; n < 16; ++n) { |
| if (*buf_ptr[len + n] != 0xBA) { |
| hex_dump_to_buffer(&(*buf_ptr)[len], 16, |
| 16, 1, linebuff, sizeof(linebuff), 1); |
| i += scnprintf(errmsg + i, errmsg_max - i, |
| "Redzone violation: %s\n", linebuff); |
| break; |
| } |
| } |
| } |
| return i; |
| } |
| |
| /** |
| * Write a multiple packets in ascending size and verify packet is received |
| * correctly. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * @name Name of the test for error reporting |
| * |
| * @returns Number of bytes written to @buf |
| * |
| * Requires that the port already be opened and loopback mode is |
| * configured correctly (if required). |
| */ |
| static int smux_ut_loopback_big_pkt(char *buf, int max, const char *name) |
| { |
| struct test_vector test_data[] = { |
| {0, 64}, |
| {0, 128}, |
| {0, 256}, |
| {0, 512}, |
| {0, 1024}, |
| {0, 2048}, |
| {0, 4096}, |
| {0, 0}, |
| }; |
| int i = 0; |
| int failed = 0; |
| struct test_vector *tv; |
| |
| /* generate test data */ |
| for (tv = test_data; tv->len > 0; ++tv) { |
| tv->data = kmalloc(tv->len + 32, GFP_KERNEL); |
| pr_err("%s: allocating %p len %d\n", |
| __func__, tv->data, tv->len); |
| if (!tv->data) { |
| i += scnprintf(buf + i, max - i, |
| "%s: Unable to allocate %d bytes\n", |
| __func__, tv->len); |
| failed = 1; |
| goto out; |
| } |
| test_pattern_fill((uint8_t *)tv->data, tv->len, 1); |
| } |
| |
| /* run test */ |
| i += scnprintf(buf + i, max - i, "Running %s\n", name); |
| while (!failed) { |
| i += smux_ut_basic_core(buf + i, max - i, test_data, name); |
| break; |
| } |
| |
| out: |
| if (failed) { |
| pr_err("%s: Failed\n", name); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| } |
| |
| for (tv = test_data; tv->len > 0; ++tv) { |
| if (!tv->data) { |
| i += test_pattern_verify((char **)&tv->data, |
| tv->len, 1, buf + i, max - i); |
| pr_err("%s: freeing %p len %d\n", __func__, |
| tv->data, tv->len); |
| kfree(tv->data); |
| } |
| } |
| |
| return i; |
| } |
| |
| /** |
| * Verify Large-packet Local Loopback Support. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * |
| * @returns Number of bytes written to @buf |
| * |
| * Open port in local loopback mode and write a multiple packets in ascending |
| * size and verify packet is received correctly. |
| */ |
| static int smux_ut_local_big_pkt(char *buf, int max) |
| { |
| int i = 0; |
| int ret; |
| |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_LOCAL_LOOPBACK, 0); |
| |
| if (ret == 0) { |
| smux_byte_loopback = SMUX_TEST_LCID; |
| i += smux_ut_loopback_big_pkt(buf, max, __func__); |
| smux_byte_loopback = 0; |
| } else { |
| i += scnprintf(buf + i, max - i, |
| "%s: Unable to set loopback mode\n", |
| __func__); |
| } |
| |
| return i; |
| } |
| |
| /** |
| * Verify Large-packet Remote Loopback Support. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * |
| * @returns Number of bytes written to @buf |
| * |
| * Open port in remote loopback mode and write a multiple packets in ascending |
| * size and verify packet is received correctly. |
| */ |
| static int smux_ut_remote_big_pkt(char *buf, int max) |
| { |
| int i = 0; |
| int ret; |
| |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_REMOTE_LOOPBACK, 0); |
| if (ret == 0) { |
| i += smux_ut_loopback_big_pkt(buf, max, __func__); |
| } else { |
| i += scnprintf(buf + i, max - i, |
| "%s: Unable to set loopback mode\n", |
| __func__); |
| } |
| |
| return i; |
| } |
| |
| /** |
| * Verify set and get operations for each TIOCM bit. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * @name Name of the test for error reporting |
| * |
| * @returns Number of bytes written to @buf |
| */ |
| static int smux_ut_tiocm(char *buf, int max, const char *name) |
| { |
| static struct smux_mock_callback cb_data; |
| static int cb_initialized; |
| static const struct tiocm_test_vector tiocm_vectors[] = { |
| /* bit to set, set old, set new, clear old */ |
| {TIOCM_DTR, TIOCM_DTR, TIOCM_DTR | TIOCM_DSR, TIOCM_DSR}, |
| {TIOCM_RTS, TIOCM_RTS, TIOCM_RTS | TIOCM_CTS, TIOCM_CTS}, |
| {TIOCM_RI, 0x0, TIOCM_RI, TIOCM_RI}, |
| {TIOCM_CD, 0x0, TIOCM_CD, TIOCM_CD}, |
| }; |
| int i = 0; |
| int failed = 0; |
| int n; |
| int ret; |
| |
| i += scnprintf(buf + i, max - i, "Running %s\n", name); |
| |
| if (!cb_initialized) |
| mock_cb_data_init(&cb_data); |
| |
| mock_cb_data_reset(&cb_data); |
| while (!failed) { |
| /* open port */ |
| ret = msm_smux_open(SMUX_TEST_LCID, &cb_data, smux_mock_cb, |
| get_rx_buffer); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_connected, ==, 1); |
| mock_cb_data_reset(&cb_data); |
| |
| /* set and clear each TIOCM bit */ |
| for (n = 0; n < ARRAY_SIZE(tiocm_vectors) && !failed; ++n) { |
| /* set signal and verify */ |
| ret = msm_smux_tiocm_set(SMUX_TEST_LCID, |
| tiocm_vectors[n].input, 0x0); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_tiocm, ==, 1); |
| UT_ASSERT_INT(cb_data.tiocm_meta.tiocm_old, ==, |
| tiocm_vectors[n].set_old); |
| UT_ASSERT_INT(cb_data.tiocm_meta.tiocm_new, ==, |
| tiocm_vectors[n].set_new); |
| mock_cb_data_reset(&cb_data); |
| |
| /* clear signal and verify */ |
| ret = msm_smux_tiocm_set(SMUX_TEST_LCID, 0x0, |
| tiocm_vectors[n].input); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_tiocm, ==, 1); |
| UT_ASSERT_INT(cb_data.tiocm_meta.tiocm_old, ==, |
| tiocm_vectors[n].clr_old); |
| UT_ASSERT_INT(cb_data.tiocm_meta.tiocm_new, ==, 0x0); |
| mock_cb_data_reset(&cb_data); |
| } |
| if (failed) |
| break; |
| |
| /* close port */ |
| ret = msm_smux_close(SMUX_TEST_LCID); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected_ssr, ==, 0); |
| break; |
| } |
| |
| if (!failed) { |
| i += scnprintf(buf + i, max - i, "\tOK\n"); |
| } else { |
| pr_err("%s: Failed\n", name); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| i += mock_cb_data_print(&cb_data, buf + i, max - i); |
| msm_smux_close(SMUX_TEST_LCID); |
| } |
| |
| mock_cb_data_reset(&cb_data); |
| return i; |
| } |
| |
| /** |
| * Verify TIOCM Status Bits for local loopback. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * |
| * @returns Number of bytes written to @buf |
| */ |
| static int smux_ut_local_tiocm(char *buf, int max) |
| { |
| int i = 0; |
| int ret; |
| |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_LOCAL_LOOPBACK, 0); |
| |
| if (ret == 0) { |
| smux_byte_loopback = SMUX_TEST_LCID; |
| i += smux_ut_tiocm(buf, max, __func__); |
| smux_byte_loopback = 0; |
| } else { |
| i += scnprintf(buf + i, max - i, |
| "%s: Unable to set loopback mode\n", |
| __func__); |
| } |
| |
| return i; |
| } |
| |
| /** |
| * Verify TIOCM Status Bits for remote loopback. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * |
| * @returns Number of bytes written to @buf |
| */ |
| static int smux_ut_remote_tiocm(char *buf, int max) |
| { |
| int i = 0; |
| int ret; |
| |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_REMOTE_LOOPBACK, 0); |
| if (ret == 0) { |
| i += smux_ut_tiocm(buf, max, __func__); |
| } else { |
| i += scnprintf(buf + i, max - i, |
| "%s: Unable to set loopback mode\n", |
| __func__); |
| } |
| |
| return i; |
| } |
| |
| /** |
| * Verify High/Low Watermark notifications. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * |
| * @returns Number of bytes written to @buf |
| */ |
| static int smux_ut_local_wm(char *buf, int max) |
| { |
| static struct smux_mock_callback cb_data; |
| static int cb_initialized; |
| int i = 0; |
| int failed = 0; |
| int ret; |
| |
| i += scnprintf(buf + i, max - i, "Running %s\n", __func__); |
| pr_err("%s", buf); |
| |
| if (!cb_initialized) |
| mock_cb_data_init(&cb_data); |
| |
| mock_cb_data_reset(&cb_data); |
| smux_byte_loopback = SMUX_TEST_LCID; |
| while (!failed) { |
| /* open port for loopback with TX disabled */ |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_LOCAL_LOOPBACK |
| | SMUX_CH_OPTION_REMOTE_TX_STOP, |
| 0); |
| UT_ASSERT_INT(ret, ==, 0); |
| |
| ret = msm_smux_open(SMUX_TEST_LCID, &cb_data, smux_mock_cb, |
| get_rx_buffer); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_connected, ==, 1); |
| mock_cb_data_reset(&cb_data); |
| |
| /* transmit 4 packets and verify high-watermark notification */ |
| ret = 0; |
| ret |= msm_smux_write(SMUX_TEST_LCID, (void *)1, |
| test_array, sizeof(test_array)); |
| ret |= msm_smux_write(SMUX_TEST_LCID, (void *)2, |
| test_array, sizeof(test_array)); |
| ret |= msm_smux_write(SMUX_TEST_LCID, (void *)3, |
| test_array, sizeof(test_array)); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 0); |
| UT_ASSERT_INT(cb_data.event_high_wm, ==, 0); |
| |
| ret = msm_smux_write(SMUX_TEST_LCID, (void *)4, |
| test_array, sizeof(test_array)); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.event_high_wm, ==, 1); |
| UT_ASSERT_INT(cb_data.event_low_wm, ==, 0); |
| mock_cb_data_reset(&cb_data); |
| |
| /* exceed watermark and verify failure return value */ |
| ret = msm_smux_write(SMUX_TEST_LCID, (void *)5, |
| test_array, sizeof(test_array)); |
| UT_ASSERT_INT(ret, ==, -EAGAIN); |
| |
| /* re-enable TX and verify low-watermark notification */ |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| 0, SMUX_CH_OPTION_REMOTE_TX_STOP); |
| UT_ASSERT_INT(ret, ==, 0); |
| while (cb_data.cb_count < 9) { |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| INIT_COMPLETION(cb_data.cb_completion); |
| } |
| if (failed) |
| break; |
| |
| UT_ASSERT_INT(cb_data.event_high_wm, ==, 0); |
| UT_ASSERT_INT(cb_data.event_low_wm, ==, 1); |
| UT_ASSERT_INT(cb_data.event_write_done, ==, 4); |
| mock_cb_data_reset(&cb_data); |
| |
| /* close port */ |
| ret = msm_smux_close(SMUX_TEST_LCID); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected_ssr, ==, 0); |
| break; |
| } |
| |
| if (!failed) { |
| i += scnprintf(buf + i, max - i, "\tOK\n"); |
| } else { |
| pr_err("%s: Failed\n", __func__); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| i += mock_cb_data_print(&cb_data, buf + i, max - i); |
| msm_smux_close(SMUX_TEST_LCID); |
| } |
| smux_byte_loopback = 0; |
| mock_cb_data_reset(&cb_data); |
| return i; |
| } |
| |
| /** |
| * Verify smuxld_receive_buf regular and error processing. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * |
| * @returns Number of bytes written to @buf |
| */ |
| static int smux_ut_local_smuxld_receive_buf(char *buf, int max) |
| { |
| static struct smux_mock_callback cb_data; |
| static int cb_initialized; |
| struct mock_read_event *meta; |
| int i = 0; |
| int failed = 0; |
| int ret; |
| char data[] = {SMUX_UT_ECHO_REQ, |
| SMUX_UT_ECHO_REQ, SMUX_UT_ECHO_REQ, |
| }; |
| char flags[] = {0x0, 0x1, 0x0,}; |
| |
| |
| i += scnprintf(buf + i, max - i, "Running %s\n", __func__); |
| |
| if (!cb_initialized) |
| mock_cb_data_init(&cb_data); |
| |
| mock_cb_data_reset(&cb_data); |
| smux_byte_loopback = SMUX_TEST_LCID; |
| while (!failed) { |
| /* open port for loopback */ |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_LOCAL_LOOPBACK, 0); |
| UT_ASSERT_INT(ret, ==, 0); |
| |
| ret = msm_smux_open(SMUX_TEST_LCID, &cb_data, smux_mock_cb, |
| get_rx_buffer); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_connected, ==, 1); |
| mock_cb_data_reset(&cb_data); |
| |
| /* |
| * Verify RX error processing by sending 3 echo requests: |
| * one OK, one fail, and a final OK |
| * |
| * The parsing framework should process the requests |
| * and send us three BYTE command packets with |
| * ECHO ACK FAIL and ECHO ACK OK characters. |
| */ |
| smuxld_receive_buf(0, data, flags, sizeof(data)); |
| |
| /* verify response characters */ |
| do { |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| INIT_COMPLETION(cb_data.cb_completion); |
| } while (cb_data.cb_count < 3); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 3); |
| UT_ASSERT_INT(cb_data.event_read_done, ==, 3); |
| |
| meta = list_first_entry(&cb_data.read_events, |
| struct mock_read_event, list); |
| UT_ASSERT_INT((int)meta->meta.pkt_priv, ==, |
| SMUX_UT_ECHO_ACK_OK); |
| list_del(&meta->list); |
| |
| meta = list_first_entry(&cb_data.read_events, |
| struct mock_read_event, list); |
| UT_ASSERT_INT((int)meta->meta.pkt_priv, ==, |
| SMUX_UT_ECHO_ACK_FAIL); |
| list_del(&meta->list); |
| |
| meta = list_first_entry(&cb_data.read_events, |
| struct mock_read_event, list); |
| UT_ASSERT_INT((int)meta->meta.pkt_priv, ==, |
| SMUX_UT_ECHO_ACK_OK); |
| list_del(&meta->list); |
| mock_cb_data_reset(&cb_data); |
| |
| /* close port */ |
| ret = msm_smux_close(SMUX_TEST_LCID); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected_ssr, ==, 0); |
| break; |
| } |
| |
| if (!failed) { |
| i += scnprintf(buf + i, max - i, "\tOK\n"); |
| } else { |
| pr_err("%s: Failed\n", __func__); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| i += mock_cb_data_print(&cb_data, buf + i, max - i); |
| msm_smux_close(SMUX_TEST_LCID); |
| } |
| smux_byte_loopback = 0; |
| mock_cb_data_reset(&cb_data); |
| return i; |
| } |
| |
| /** |
| * Allocates a new buffer or returns a failure based upon the |
| * global @get_rx_buffer_mock_fail. |
| */ |
| static int get_rx_buffer_mock(void *priv, void **pkt_priv, |
| void **buffer, int size) |
| { |
| void *rx_buf; |
| unsigned long flags; |
| struct smux_mock_callback *cb_ptr; |
| |
| cb_ptr = (struct smux_mock_callback *)priv; |
| if (!cb_ptr) { |
| pr_err("%s: no callback data\n", __func__); |
| return -ENXIO; |
| } |
| |
| if (get_rx_buffer_mock_fail) { |
| /* force failure and log failure event */ |
| struct mock_get_rx_buff_event *meta; |
| meta = kmalloc(sizeof(struct mock_get_rx_buff_event), |
| GFP_KERNEL); |
| if (!meta) { |
| pr_err("%s: unable to allocate metadata\n", __func__); |
| return -ENOMEM; |
| } |
| INIT_LIST_HEAD(&meta->list); |
| meta->size = size; |
| meta->jiffies = jiffies; |
| |
| spin_lock_irqsave(&cb_ptr->lock, flags); |
| ++cb_ptr->get_rx_buff_retry_count; |
| list_add_tail(&meta->list, &cb_ptr->get_rx_buff_retry_events); |
| ++cb_ptr->cb_count; |
| complete(&cb_ptr->cb_completion); |
| spin_unlock_irqrestore(&cb_ptr->lock, flags); |
| return -EAGAIN; |
| } else { |
| rx_buf = kmalloc(size, GFP_KERNEL); |
| *pkt_priv = (void *)0x1234; |
| *buffer = rx_buf; |
| return 0; |
| } |
| return 0; |
| } |
| |
| /** |
| * Verify get_rx_buffer callback retry. |
| * |
| * @buf Buffer for status message |
| * @max Size of buffer |
| * |
| * @returns Number of bytes written to @buf |
| */ |
| static int smux_ut_local_get_rx_buff_retry(char *buf, int max) |
| { |
| static struct smux_mock_callback cb_data; |
| static int cb_initialized; |
| int i = 0; |
| int failed = 0; |
| char try_two[] = "try 2"; |
| int ret; |
| unsigned long start_j; |
| struct mock_get_rx_buff_event *event; |
| struct mock_read_event *read_event; |
| int try; |
| |
| i += scnprintf(buf + i, max - i, "Running %s\n", __func__); |
| pr_err("%s", buf); |
| |
| if (!cb_initialized) |
| mock_cb_data_init(&cb_data); |
| |
| mock_cb_data_reset(&cb_data); |
| smux_byte_loopback = SMUX_TEST_LCID; |
| while (!failed) { |
| /* open port for loopback */ |
| ret = msm_smux_set_ch_option(SMUX_TEST_LCID, |
| SMUX_CH_OPTION_LOCAL_LOOPBACK, |
| 0); |
| UT_ASSERT_INT(ret, ==, 0); |
| |
| ret = msm_smux_open(SMUX_TEST_LCID, &cb_data, |
| smux_mock_cb, get_rx_buffer_mock); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_connected, ==, 1); |
| mock_cb_data_reset(&cb_data); |
| |
| /* |
| * Force get_rx_buffer failure for a single RX packet |
| * |
| * The get_rx_buffer calls should follow an exponential |
| * back-off with a maximum timeout of 1024 ms after which we |
| * will get a failure notification. |
| * |
| * Try Post Delay (ms) |
| * 0 - |
| * 1 1 |
| * 2 2 |
| * 3 4 |
| * 4 8 |
| * 5 16 |
| * 6 32 |
| * 7 64 |
| * 8 128 |
| * 9 256 |
| * 10 512 |
| * 11 1024 |
| * 12 Fail |
| * |
| * All times are limited by the precision of the timer |
| * framework, so ranges are used in the test |
| * verification. |
| */ |
| get_rx_buffer_mock_fail = 1; |
| start_j = jiffies; |
| ret = msm_smux_write(SMUX_TEST_LCID, (void *)1, |
| test_array, sizeof(test_array)); |
| UT_ASSERT_INT(ret, ==, 0); |
| ret = msm_smux_write(SMUX_TEST_LCID, (void *)2, |
| try_two, sizeof(try_two)); |
| UT_ASSERT_INT(ret, ==, 0); |
| |
| /* wait for RX failure event */ |
| while (cb_data.event_read_failed == 0) { |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, 2*HZ), |
| >, 0); |
| INIT_COMPLETION(cb_data.cb_completion); |
| } |
| if (failed) |
| break; |
| |
| /* verify retry attempts */ |
| UT_ASSERT_INT(cb_data.get_rx_buff_retry_count, ==, 12); |
| event = list_first_entry(&cb_data.get_rx_buff_retry_events, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 0, 0 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 1, 1 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 2, 2 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 4, 4 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 8, 8 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 16, 16 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 32 - 20, 32 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 64 - 20, 64 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 128 - 20, 128 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 256 - 20, 256 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 512 - 20, 512 + 20); |
| start_j = event->jiffies; |
| |
| event = list_first_entry(&event->list, |
| struct mock_get_rx_buff_event, list); |
| pr_err("%s: event->jiffies = %d (ms)\n", __func__, |
| jiffies_to_msecs(event->jiffies - start_j)); |
| UT_ASSERT_INT_IN_RANGE( |
| jiffies_to_msecs(event->jiffies - start_j), |
| 1024 - 20, 1024 + 20); |
| mock_cb_data_reset(&cb_data); |
| |
| /* verify 2nd pending RX packet goes through */ |
| get_rx_buffer_mock_fail = 0; |
| INIT_COMPLETION(cb_data.cb_completion); |
| if (cb_data.event_read_done == 0) |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.event_read_done, ==, 1); |
| UT_ASSERT_INT(list_empty(&cb_data.read_events), ==, 0); |
| read_event = list_first_entry(&cb_data.read_events, |
| struct mock_read_event, list); |
| UT_ASSERT_PTR(read_event->meta.pkt_priv, ==, (void *)0x1234); |
| UT_ASSERT_PTR(read_event->meta.buffer, !=, NULL); |
| UT_ASSERT_INT(0, ==, memcmp(read_event->meta.buffer, try_two, |
| sizeof(try_two))); |
| mock_cb_data_reset(&cb_data); |
| |
| /* Test maximum retry queue size */ |
| get_rx_buffer_mock_fail = 1; |
| for (try = 0; try < (SMUX_RX_RETRY_MAX_PKTS + 1); ++try) { |
| mock_cb_data_reset(&cb_data); |
| ret = msm_smux_write(SMUX_TEST_LCID, (void *)1, |
| test_array, sizeof(test_array)); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| } |
| |
| /* should have 32 successful rx packets and 1 failed */ |
| while (cb_data.event_read_failed == 0) { |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, 2*HZ), |
| >, 0); |
| INIT_COMPLETION(cb_data.cb_completion); |
| } |
| if (failed) |
| break; |
| |
| get_rx_buffer_mock_fail = 0; |
| while (cb_data.event_read_done < SMUX_RX_RETRY_MAX_PKTS) { |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, 2*HZ), |
| >, 0); |
| INIT_COMPLETION(cb_data.cb_completion); |
| } |
| if (failed) |
| break; |
| |
| UT_ASSERT_INT(1, ==, cb_data.event_read_failed); |
| UT_ASSERT_INT(SMUX_RX_RETRY_MAX_PKTS, ==, |
| cb_data.event_read_done); |
| mock_cb_data_reset(&cb_data); |
| |
| /* close port */ |
| ret = msm_smux_close(SMUX_TEST_LCID); |
| UT_ASSERT_INT(ret, ==, 0); |
| UT_ASSERT_INT( |
| (int)wait_for_completion_timeout( |
| &cb_data.cb_completion, HZ), |
| >, 0); |
| UT_ASSERT_INT(cb_data.cb_count, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected, ==, 1); |
| UT_ASSERT_INT(cb_data.event_disconnected_ssr, ==, 0); |
| break; |
| } |
| |
| if (!failed) { |
| i += scnprintf(buf + i, max - i, "\tOK\n"); |
| } else { |
| pr_err("%s: Failed\n", __func__); |
| i += scnprintf(buf + i, max - i, "\tFailed\n"); |
| i += mock_cb_data_print(&cb_data, buf + i, max - i); |
| msm_smux_close(SMUX_TEST_LCID); |
| } |
| smux_byte_loopback = 0; |
| mock_cb_data_reset(&cb_data); |
| return i; |
| } |
| |
| static char debug_buffer[DEBUG_BUFMAX]; |
| |
| static ssize_t debug_read(struct file *file, char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| int (*fill)(char *buf, int max) = file->private_data; |
| int bsize; |
| |
| if (*ppos != 0) |
| return 0; |
| |
| bsize = fill(debug_buffer, DEBUG_BUFMAX); |
| return simple_read_from_buffer(buf, count, ppos, debug_buffer, bsize); |
| } |
| |
| static int debug_open(struct inode *inode, struct file *file) |
| { |
| file->private_data = inode->i_private; |
| return 0; |
| } |
| |
| static const struct file_operations debug_ops = { |
| .read = debug_read, |
| .open = debug_open, |
| }; |
| |
| static void debug_create(const char *name, mode_t mode, |
| struct dentry *dent, |
| int (*fill)(char *buf, int max)) |
| { |
| debugfs_create_file(name, mode, dent, fill, &debug_ops); |
| } |
| |
| static int __init smux_debugfs_init(void) |
| { |
| struct dentry *dent; |
| |
| dent = debugfs_create_dir("n_smux", 0); |
| if (IS_ERR(dent)) |
| return PTR_ERR(dent); |
| |
| /* |
| * Add Unit Test entries. |
| * |
| * The idea with unit tests is that you can run all of them |
| * from ADB shell by doing: |
| * adb shell |
| * cat ut* |
| * |
| * And if particular tests fail, you can then repeatedly run the failing |
| * tests as you debug and resolve the failing test. |
| */ |
| debug_create("ut_local_basic", 0444, dent, smux_ut_basic); |
| debug_create("ut_remote_basic", 0444, dent, smux_ut_remote_basic); |
| debug_create("ut_local_big_pkt", 0444, dent, smux_ut_local_big_pkt); |
| debug_create("ut_remote_big_pkt", 0444, dent, smux_ut_remote_big_pkt); |
| debug_create("ut_local_tiocm", 0444, dent, smux_ut_local_tiocm); |
| debug_create("ut_remote_tiocm", 0444, dent, smux_ut_remote_tiocm); |
| debug_create("ut_local_wm", 0444, dent, smux_ut_local_wm); |
| debug_create("ut_local_smuxld_receive_buf", 0444, dent, |
| smux_ut_local_smuxld_receive_buf); |
| debug_create("ut_local_get_rx_buff_retry", 0444, dent, |
| smux_ut_local_get_rx_buff_retry); |
| |
| return 0; |
| } |
| |
| late_initcall(smux_debugfs_init); |
| |