ath5k: Use static const
Using static const generally increases object text and decreases data size.
It also generally decreases overall object size.
text data bss dec hex filename
11266 56 2464 13786 35da drivers/net/wireless/ath/ath5k/ani.o.old
11181 56 2464 13701 3585 drivers/net/wireless/ath/ath5k/ani.o.new
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
index db98a85..6b75b22 100644
--- a/drivers/net/wireless/ath/ath5k/ani.c
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -63,15 +63,15 @@
* so i stick with the HAL version for now...
*/
#if 0
- const s8 hi[] = { -18, -18, -16, -14, -12 };
- const s8 lo[] = { -52, -56, -60, -64, -70 };
- const s8 sz[] = { -34, -41, -48, -55, -62 };
- const s8 fr[] = { -70, -72, -75, -78, -80 };
+ static const s8 hi[] = { -18, -18, -16, -14, -12 };
+ static const s8 lo[] = { -52, -56, -60, -64, -70 };
+ static const s8 sz[] = { -34, -41, -48, -55, -62 };
+ static const s8 fr[] = { -70, -72, -75, -78, -80 };
#else
- const s8 sz[] = { -55, -62 };
- const s8 lo[] = { -64, -70 };
- const s8 hi[] = { -14, -12 };
- const s8 fr[] = { -78, -80 };
+ static const s8 sz[] = { -55, -62 };
+ static const s8 lo[] = { -64, -70 };
+ static const s8 hi[] = { -14, -12 };
+ static const s8 fr[] = { -78, -80 };
#endif
if (level < 0 || level >= ARRAY_SIZE(sz)) {
ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range",
@@ -102,7 +102,7 @@
void
ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
{
- const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+ static const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
if (level < 0 || level >= ARRAY_SIZE(val) ||
level > ah->ah_sc->ani_state.max_spur_level) {
@@ -127,7 +127,7 @@
void
ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
{
- const int val[] = { 0, 4, 8 };
+ static const int val[] = { 0, 4, 8 };
if (level < 0 || level >= ARRAY_SIZE(val)) {
ATH5K_ERR(ah->ah_sc, "firstep level %d out of range", level);
@@ -151,12 +151,12 @@
void
ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on)
{
- const int m1l[] = { 127, 50 };
- const int m2l[] = { 127, 40 };
- const int m1[] = { 127, 0x4d };
- const int m2[] = { 127, 0x40 };
- const int m2cnt[] = { 31, 16 };
- const int m2lcnt[] = { 63, 48 };
+ static const int m1l[] = { 127, 50 };
+ static const int m2l[] = { 127, 40 };
+ static const int m1[] = { 127, 0x4d };
+ static const int m2[] = { 127, 0x40 };
+ static const int m2cnt[] = { 31, 16 };
+ static const int m2lcnt[] = { 63, 48 };
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
AR5K_PHY_WEAK_OFDM_LOW_THR_M1, m1l[on]);
@@ -192,7 +192,7 @@
void
ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on)
{
- const int val[] = { 8, 6 };
+ static const int val[] = { 8, 6 };
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR,
AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]);
ah->ah_sc->ani_state.cck_weak_sig = on;