diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
new file mode 100644
index 0000000..3e89767
--- /dev/null
+++ b/arch/xtensa/Kconfig
@@ -0,0 +1,258 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
+
+mainmenu "Linux/Xtensa Kernel Configuration"
+
+config FRAME_POINTER
+	bool
+	default n
+
+config XTENSA
+	bool
+	default y
+	help
+	  Xtensa processors are 32-bit RISC machines designed by Tensilica
+	  primarily for embedded systems.  These processors are both
+	  configurable and extensible.  The Linux port to the Xtensa
+	  architecture supports all processor configurations and extensions,
+	  with reasonable minimum requirements.  The Xtensa Linux project has
+	  a home page at <http://xtensa.sourceforge.net/>.
+
+config UID16
+	bool
+	default n
+
+config RWSEM_XCHGADD_ALGORITHM
+	bool
+	default y
+
+config HAVE_DEC_LOCK
+	bool
+	default y
+
+config GENERIC_HARDIRQS
+	bool
+	default y
+
+source "init/Kconfig"
+
+menu "Processor type and features"
+
+choice
+	prompt "Xtensa Processor Configuration"
+	default XTENSA_CPU_LINUX_BE
+
+config XTENSA_CPU_LINUX_BE
+	bool "linux_be"
+	---help---
+	  The linux_be processor configuration is the baseline Xtensa
+	  configurations included in this kernel and also used by
+	  binutils, gcc, and gdb. It contains no TIE, no coprocessors,
+	  and the following configuration options:
+
+	  Code Density Option                2 Misc Special Registers
+	  NSA/NSAU Instructions              128-bit Data Bus Width
+	  Processor ID                       8K, 2-way I and D Caches
+	  Zero-Overhead Loops                2 Inst Address Break Registers
+	  Big Endian                         2 Data Address Break Registers
+	  64 General-Purpose Registers       JTAG Interface and Trace Port
+	  17 Interrupts                      MMU w/ TLBs and Autorefill
+	  3 Interrupt Levels                 8 Autorefill Ways (I/D TLBs)
+	  3 Timers                           Unaligned Exceptions
+endchoice
+
+config MMU
+	bool
+	default y
+
+config XTENSA_UNALIGNED_USER
+	bool "Unaligned memory access in use space"
+	---help---
+	   The Xtensa architecture currently does not handle unaligned
+	   memory accesses in hardware but through an exception handler.
+	   Per default, unaligned memory accesses are disabled in user space.
+
+	   Say Y here to enable unaligned memory access in user space.
+
+config PREEMPT
+	bool "Preemptible Kernel"
+	---help---
+           This option reduces the latency of the kernel when reacting to
+           real-time or interactive events by allowing a low priority process to
+           be preempted even if it is in kernel mode executing a system call.
+           Unfortunately the kernel code has some race conditions if both
+           CONFIG_SMP and CONFIG_PREEMPT are enabled, so this option is
+           currently disabled if you are building an SMP kernel.
+
+           Say Y here if you are building a kernel for a desktop, embedded
+           or real-time system.  Say N if you are unsure.
+
+config MATH_EMULATION
+	bool "Math emulation"
+	help
+	Can we use information of configuration file?
+
+config HIGHMEM
+	bool "High memory support"
+
+endmenu
+
+menu "Platform options"
+
+choice
+	prompt "Xtensa System Type"
+	default XTENSA_PLATFORM_ISS
+
+config XTENSA_PLATFORM_ISS
+	bool "ISS"
+	help
+	  ISS is an acronym for Tensilica's Instruction Set Simulator.
+
+config XTENSA_PLATFORM_XT2000
+	bool "XT2000"
+	help
+	  XT2000 is the name of Tensilica's feature-rich emulation platform.
+	  This hardware is capable of running a full Linux distribution.
+
+endchoice
+
+
+config XTENSA_CALIBRATE_CCOUNT
+	bool "Auto calibration of the CPU clock rate"
+	---help---
+	  On some platforms (XT2000, for example), the CPU clock rate can
+	  vary.  The frequency can be determined, however, by measuring
+	  against a well known, fixed frequency, such as an UART oscillator.
+
+config XTENSA_CPU_CLOCK
+	int "CPU clock rate [MHz]"
+	depends on !XTENSA_CALIBRATE_CCOUNT
+	default "16"
+
+config GENERIC_CALIBRATE_DELAY
+	bool "Auto calibration of the BogoMIPS value"
+	---help---
+	  The BogoMIPS value can easily derived from the CPU frequency.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,38400 root=/dev/ram"
+	help
+	  On some architectures (EBSA110 and CATS), there is currently no way
+	  for the boot loader to pass arguments to the kernel. For these
+	  architectures, you should supply some command-line options at build
+	  time by entering them here. As a minimum, you should specify the
+	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+config SERIAL_CONSOLE
+	bool
+	depends on XTENSA_PLATFORM_ISS
+	default y
+
+config XTENSA_ISS_NETWORK
+	bool
+	depends on XTENSA_PLATFORM_ISS
+	default y
+
+endmenu
+
+menu "Bus options"
+
+config PCI
+	bool "PCI support" if !XTENSA_PLATFORM_ISS
+	depends on !XTENSA_PLATFORM_ISS
+	default y
+	help
+	  Find out whether you have a PCI motherboard. PCI is the name of a
+	  bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+	  VESA. If you have PCI, say Y, otherwise N.
+
+	  The PCI-HOWTO, available from
+	  <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+	  information about which PCI hardware does work under Linux and which
+	  doesn't
+
+source "drivers/pci/Kconfig"
+
+config HOTPLUG
+
+	bool "Support for hot-pluggable devices"
+	---help---
+	Say Y here if you want to plug devices into your computer while
+	the system is running, and be able to use them quickly.  In many
+	cases, the devices can likewise be unplugged at any time too.
+
+	One well known example of this is PCMCIA- or PC-cards, credit-card
+	size devices such as network cards, modems or hard drives which are
+	plugged into slots found on all modern laptop computers.  Another
+	example, used on modern desktops as well as laptops, is USB.
+
+	Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
+	software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	Then your kernel will automatically call out to a user mode "policy
+	agent" (/sbin/hotplug) to load modules and set up software needed
+	to use devices as you hotplug them.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Exectuable file formats"
+
+# only elf supported
+config KCORE_ELF
+        bool
+        depends on PROC_FS
+        default y
+        help
+          If you enabled support for /proc file system then the file
+          /proc/kcore will contain the kernel core image in ELF format. This
+          can be used in gdb:
+
+          $ cd /usr/src/linux ; gdb vmlinux /proc/kcore
+
+          This is especially useful if you have compiled the kernel with the
+          "-g" option to preserve debugging information. It is mainly used
+	  for examining kernel data structures on the live kernel.
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+menu "Xtensa initrd options"
+	depends on BLK_DEV_INITRD
+
+	config EMBEDDED_RAMDISK
+	bool "Embed root filesystem ramdisk into the kernel"
+
+config EMBEDDED_RAMDISK_IMAGE
+	string "Filename of gziped ramdisk image"
+	depends on EMBEDDED_RAMDISK
+	default "ramdisk.gz"
+	help
+	  This is the filename of the ramdisk image to be built into the
+	  kernel.  Relative pathnames are relative to arch/xtensa/boot/ramdisk/.
+	  The ramdisk image is not part of the kernel distribution; you must
+	  provide one yourself.
+endmenu
+
+source "arch/xtensa/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
+
+
diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug
new file mode 100644
index 0000000..11c5852
--- /dev/null
+++ b/arch/xtensa/Kconfig.debug
@@ -0,0 +1,7 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+endmenu
+
+
diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile
new file mode 100644
index 0000000..4fa2745
--- /dev/null
+++ b/arch/xtensa/Makefile
@@ -0,0 +1,102 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2001 - 2005  Tensilica Inc.
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+
+# Core configuration.
+# (Use CPU=<xtensa_config> to use another default compiler.)
+
+cpu-$(CONFIG_XTENSA_CPU_LINUX_BE)	:= linux_be
+cpu-$(CONFIG_XTENSA_CPU_LINUX_CUSTOM)	:= linux_custom
+
+CPU = $(cpu-y)
+export CPU
+
+# Platform configuration
+
+platform-y					:= common
+platform-$(CONFIG_XTENSA_PLATFORM_XT2000)	:= xt2000
+platform-$(CONFIG_XTENSA_PLATFORM_ISS)		:= iss
+
+PLATFORM = $(platform-y)
+export PLATFORM
+
+#LDFLAGS_vmlinux		:= -T$(word 1,$(LINKSCRIPT))
+AFLAGS_vmlinux.lds.o	:= -Uxtensa
+CPPFLAGS		+= -Iarch/xtensa -Iinclude/asm  -mlongcalls  -g
+AFLAGS			+= -Iarch/xtensa -Iinclude/asm
+CPP			= $(CC) -E $(CFLAGS)
+
+cflags-y	+= -Iarch/xtensa -pipe -mlongcalls
+
+
+KBUILD_DEFCONFIG := common_defconfig
+
+# ramdisk/initrd support
+# You need a compressed ramdisk image, named ramdisk.gz in
+# arch/xtensa/boot/ramdisk
+
+core-$(CONFIG_EMBEDDED_RAMDISK)	+= arch/xtensa/boot/ramdisk/
+
+# Test for cross compiling
+
+ifneq ($(CPU),)
+  COMPILE_ARCH = $(shell uname -m)
+
+  ifneq ($(COMPILE_ARCH), xtensa)
+    ifndef CROSS_COMPILE
+      CROSS_COMPILE = xtensa_$(CPU)-
+    endif
+  endif
+endif
+
+#
+
+LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+
+head-y		:= arch/xtensa/kernel/head.o
+core-y		+= arch/xtensa/kernel/ \
+		   arch/xtensa/mm/ arch/xtensa/platform-$(PLATFORM)/
+libs-y		+= arch/xtensa/lib/ $(LIBGCC)
+
+boot	:= arch/xtensa/boot
+
+arch/xtensa/kernel/asm-offsets.s: \
+	arch/xtensa/kernel/asm-offsets.c \
+	include/asm-xtensa/.platform
+
+include/asm-xtensa/offsets.h: arch/xtensa/kernel/asm-offsets.s
+	$(call filechk,gen-asm-offsets)
+
+prepare: include/asm-xtensa/.platform include/asm-xtensa/offsets.h
+
+# Update machine cpu and platform symlinks if something which affects
+# them changed.
+
+include/asm-xtensa/.platform: $(wildcard include/config/arch/*.h)
+	@echo '  Setting up cpu ($(CPU)) and platform ($(PLATFORM)) symlinks'
+	$(Q)rm -f include/asm-xtensa/platform
+	$(Q)rm -f include/asm-xtensa/xtensa/config
+	$(Q)(cd include/asm-xtensa/; ln -sf platform-$(PLATFORM) platform)
+	$(Q)(cd include/asm-xtensa/xtensa; ln -sf config-$(CPU) config)
+
+all: zImage
+
+bzImage : zImage
+
+zImage zImage.initrd: vmlinux
+	$(Q)$(MAKE) $(build)=$(boot) $@
+
+CLEAN_FILES	+= arch/xtensa/vmlinux.lds include/asm-xtensa/offset.h
+
+define archhelp
+  @echo '* zImage      - Compressed kernel image (arch/xtensa/boot/images/zImage.*)'
+endef
+
diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig
new file mode 100644
index 0000000..1d230ee
--- /dev/null
+++ b/arch/xtensa/configs/common_defconfig
@@ -0,0 +1,662 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.11-rc2
+# Tue Mar  1 16:36:53 2005
+#
+# CONFIG_FRAME_POINTER is not set
+CONFIG_XTENSA=y
+# CONFIG_UID16 is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_GENERIC_HARDIRQS=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_CLEAN_COMPILE=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Processor type and features
+#
+CONFIG_XTENSA_ARCH_LINUX_BE=y
+# CONFIG_XTENSA_ARCH_LINUX_LE is not set
+# CONFIG_XTENSA_ARCH_LINUX_TEST is not set
+# CONFIG_XTENSA_ARCH_S5 is not set
+# CONFIG_XTENSA_CUSTOM is not set
+CONFIG_MMU=y
+# CONFIG_XTENSA_UNALIGNED_USER is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_HIGHMEM is not set
+
+#
+# Platform options
+#
+# CONFIG_XTENSA_PLATFORM_ISS is not set
+CONFIG_XTENSA_PLATFORM_XT2000=y
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400 ip=bootp root=nfs nfsroot=/opt/montavista/pro/devkit/xtensa/linux_be/target"
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCI_NAMES is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Exectuable file formats
+#
+CONFIG_KCORE_ELF=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_XT2000_SONIC=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+CONFIG_STRIP=m
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+# CONFIG_ATMEL is not set
+
+#
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
+#
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_RTC is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+# CONFIG_USB is not set
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_SYSFS=y
+CONFIG_DEVFS_FS=y
+# CONFIG_DEVFS_MOUNT is not set
+# CONFIG_DEVFS_DEBUG is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC32 is not set
+# CONFIG_LIBCRC32C is not set