Merge branch 'work-fixes'
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b874771..75205391 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1034,6 +1034,8 @@
nomce [IA-32] Machine Check Exception
+ nomca [IA-64] Disable machine check abort handling
+
noresidual [PPC] Don't use residual data on PReP machines.
noresume [SWSUSP] Disables resume and restores original swap
diff --git a/Makefile b/Makefile
index 77a448c..46eea76 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 16
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
NAME=Sliding Snow Leopard
# *DOCUMENTATION*
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 0afec85..5b1a7d4 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -733,7 +733,7 @@
config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
- depends on SMP && HOTPLUG && EXPERIMENTAL
+ depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
Say Y here to experiment with turning CPUs off and on. CPUs
can be controlled through /sys/devices/system/cpu.
@@ -1060,6 +1060,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
index 8309a7b..79577f0 100644
--- a/arch/i386/kernel/acpi/boot.c
+++ b/arch/i386/kernel/acpi/boot.c
@@ -44,6 +44,9 @@
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
+
+
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c
index d3fdf00..5390b52 100644
--- a/arch/i386/kernel/microcode.c
+++ b/arch/i386/kernel/microcode.c
@@ -74,6 +74,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
+#include <linux/cpumask.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
@@ -250,8 +251,8 @@
error = -EINVAL;
goto out;
}
-
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
@@ -293,7 +294,7 @@
error = -EFAULT;
goto out;
}
- for (cpu_num = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ for_each_online_cpu(cpu_num) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (uci->err != MC_NOTFOUND) /* already found a match or not an online cpu*/
continue;
@@ -304,7 +305,9 @@
}
}
/* now check if any cpu has matched */
- for (cpu_num = 0, allocated_flag = 0, sum = 0; cpu_num < num_online_cpus(); cpu_num++) {
+ allocated_flag = 0;
+ sum = 0;
+ for_each_online_cpu(cpu_num) {
if (ucode_cpu_info[cpu_num].err == MC_MARKED) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
if (!allocated_flag) {
@@ -415,12 +418,12 @@
}
out_free:
- for (i = 0; i < num_online_cpus(); i++) {
+ for_each_online_cpu(i) {
if (ucode_cpu_info[i].mc) {
int j;
void *tmp = ucode_cpu_info[i].mc;
vfree(tmp);
- for (j = i; j < num_online_cpus(); j++) {
+ for_each_online_cpu(j) {
if (ucode_cpu_info[j].mc == tmp)
ucode_cpu_info[j].mc = NULL;
}
diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c
index 6761d29..b584060 100644
--- a/arch/i386/mach-voyager/voyager_basic.c
+++ b/arch/i386/mach-voyager/voyager_basic.c
@@ -25,7 +25,6 @@
#include <linux/sysrq.h>
#include <linux/smp.h>
#include <linux/nodemask.h>
-#include <asm/cpu.h>
#include <asm/io.h>
#include <asm/voyager.h>
#include <asm/vic.h>
@@ -331,16 +330,3 @@
if (pm_power_off)
pm_power_off();
}
-
-static struct i386_cpu cpu_devices[NR_CPUS];
-
-static int __init topology_init(void)
-{
- int i;
-
- for_each_present_cpu(i)
- register_cpu(&cpu_devices[i].cpu, i, NULL);
- return 0;
-}
-
-subsys_initcall(topology_init);
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 845cd09..a85ea9d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -453,6 +453,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig
index b40672b..90e9c2e 100644
--- a/arch/ia64/configs/bigsur_defconfig
+++ b/arch/ia64/configs/bigsur_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:18:49 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:10:42 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -23,17 +22,18 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -42,8 +42,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -58,17 +60,36 @@
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
@@ -81,18 +102,17 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_BRL_EMU=y
CONFIG_IA64_L1_CACHE_SHIFT=6
-# CONFIG_NUMA is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
@@ -105,7 +125,12 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
# CONFIG_IA64_MCA_RECOVERY is not set
@@ -117,7 +142,6 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -125,6 +149,7 @@
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
@@ -137,6 +162,7 @@
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
@@ -173,6 +199,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -206,6 +233,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -218,14 +250,16 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -286,20 +320,13 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=m
#
@@ -390,6 +417,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -399,6 +427,7 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -409,14 +438,7 @@
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -448,6 +470,7 @@
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -486,6 +509,7 @@
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -524,6 +548,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -630,6 +655,7 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -681,6 +707,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -731,12 +758,19 @@
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -754,6 +788,7 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
@@ -775,6 +810,7 @@
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
@@ -830,6 +866,8 @@
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -837,17 +875,18 @@
# Generic devices
#
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -856,38 +895,38 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
CONFIG_SND_CS4281=m
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -929,12 +968,15 @@
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,13 +988,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
@@ -972,6 +1016,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1046,7 +1091,7 @@
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
@@ -1071,6 +1116,7 @@
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1111,6 +1157,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1153,6 +1200,7 @@
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_EXPERIMENTAL is not set
@@ -1179,6 +1227,7 @@
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1237,28 +1286,32 @@
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index 991c07b..184678f 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc2
-# Wed Sep 28 08:27:29 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:15:43 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -23,18 +22,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -43,8 +43,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -59,17 +61,36 @@
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
@@ -82,6 +103,8 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
@@ -105,6 +128,9 @@
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -117,13 +143,13 @@
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -131,6 +157,7 @@
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
@@ -145,6 +172,7 @@
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
@@ -187,6 +215,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -221,6 +250,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -233,8 +267,11 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
@@ -295,20 +332,13 @@
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -400,6 +430,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -409,16 +440,19 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
@@ -436,14 +470,7 @@
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -476,6 +503,7 @@
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
@@ -515,6 +543,7 @@
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -564,6 +593,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -668,12 +698,15 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
@@ -689,6 +722,7 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +772,10 @@
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
@@ -749,6 +783,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -756,6 +791,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -765,6 +806,7 @@
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -815,26 +857,28 @@
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -843,40 +887,40 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -922,12 +966,15 @@
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -939,12 +986,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
@@ -964,6 +1014,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1043,6 +1094,7 @@
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
@@ -1051,6 +1103,10 @@
CONFIG_SGI_IOC3=y
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1079,6 +1135,7 @@
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1120,6 +1177,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1189,6 +1247,7 @@
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1254,26 +1313,30 @@
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
diff --git a/arch/ia64/configs/sim_defconfig b/arch/ia64/configs/sim_defconfig
index a26781c..d9146c3 100644
--- a/arch/ia64/configs/sim_defconfig
+++ b/arch/ia64/configs/sim_defconfig
@@ -1,39 +1,52 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:13:41 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_HOTPLUG is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -43,21 +56,45 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
CONFIG_IA64_HP_SIM=y
# CONFIG_ITANIUM is not set
@@ -66,17 +103,36 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
-# CONFIG_VIRTUAL_MEM_MAP is not set
# CONFIG_IA64_CYCLONE is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=64
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+# CONFIG_VIRTUAL_MEM_MAP is not set
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
+# CONFIG_IA64_MCA_RECOVERY is not set
# CONFIG_PERFMON is not set
CONFIG_IA64_PALINFO=m
@@ -84,7 +140,6 @@
# Firmware Drivers
#
CONFIG_EFI_VARS=y
-# CONFIG_SMBIOS is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
@@ -93,15 +148,98 @@
#
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
#
# Generic Driver Options
#
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
@@ -118,12 +256,16 @@
#
# Block devices
#
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -133,6 +275,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -144,6 +287,7 @@
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -157,13 +301,14 @@
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
-# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_DEBUG is not set
#
@@ -174,77 +319,47 @@
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
-# CONFIG_IEEE1394 is not set
#
# I2O device support
#
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
+# CONFIG_NETDEVICES is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
-# Networking options
+# PHY device support
#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
#
-# SCTP Configuration (EXPERIMENTAL)
+# Ethernet (10 or 100Mbit)
#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
+# CONFIG_NET_ETHERNET is not set
#
-# QoS and/or fair queueing
+# Ethernet (1000 Mbit)
#
-# CONFIG_NET_SCHED is not set
#
-# Network testing
+# Ethernet (10000 Mbit)
#
-# CONFIG_NET_PKTGEN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_NETDEVICES is not set
#
# ISDN subsystem
@@ -274,16 +389,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -293,6 +398,15 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -310,7 +424,6 @@
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
-# CONFIG_QIC02_TAPE is not set
#
# IPMI
@@ -324,15 +437,19 @@
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
-# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -340,10 +457,33 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -362,7 +502,6 @@
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
-# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
@@ -373,6 +512,12 @@
#
# USB support
#
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
#
# USB Gadget Support
@@ -380,22 +525,41 @@
# CONFIG_USB_GADGET is not set
#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -406,7 +570,8 @@
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -415,12 +580,12 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -448,18 +613,22 @@
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -476,10 +645,10 @@
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -490,8 +659,13 @@
#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# HP Simulator drivers
@@ -502,33 +676,50 @@
CONFIG_HP_SIMSCSI=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
-# CONFIG_IA64_GRANULE_16MB is not set
-CONFIG_IA64_GRANULE_64MB=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
+# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_IA64_GRANULE_16MB is not set
+CONFIG_IA64_GRANULE_64MB=y
+# CONFIG_IA64_PRINT_HAZARDS is not set
+# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_DEBUG_INFO=y
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 3cb503b..8206752 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 10:33:48 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:06:38 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -23,17 +22,18 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -42,8 +42,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -88,7 +90,7 @@
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
@@ -126,6 +128,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -140,6 +143,7 @@
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
@@ -166,6 +170,7 @@
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
@@ -207,6 +212,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -247,6 +253,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -330,6 +341,7 @@
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -457,13 +469,7 @@
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-CONFIG_SCSI_QLA22XX=y
-CONFIG_SCSI_QLA2300=y
-CONFIG_SCSI_QLA2322=y
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -545,6 +551,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -632,12 +639,15 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
@@ -686,8 +696,8 @@
CONFIG_AGP_SGI_TIOCA=y
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=m
-# CONFIG_HPET is not set
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
@@ -703,6 +713,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -791,12 +807,14 @@
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
@@ -816,6 +834,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -903,6 +922,10 @@
CONFIG_SGI_IOC3=y
#
+# EDAC - error detection and reporting (RAS)
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -931,6 +954,7 @@
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -973,6 +997,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1041,6 +1066,7 @@
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1111,19 +1137,21 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index 6859119..1255681 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc4
-# Fri Dec 2 16:06:32 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:49:18 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -23,18 +22,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -43,8 +43,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -88,7 +90,7 @@
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ZONE_DMA_IS_DMA32=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
@@ -162,6 +164,7 @@
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
@@ -203,6 +206,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -237,6 +241,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -326,6 +335,7 @@
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -443,13 +453,7 @@
CONFIG_SCSI_QLOGIC_FC=y
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -572,6 +576,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -676,12 +681,15 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
@@ -694,6 +702,7 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -738,10 +747,10 @@
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
#
@@ -756,6 +765,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -765,6 +780,7 @@
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -854,12 +870,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
@@ -873,6 +892,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -948,7 +968,7 @@
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
@@ -980,6 +1000,7 @@
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1021,6 +1042,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1090,6 +1112,7 @@
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1157,18 +1180,20 @@
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 53899dc..949dc46 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -1,16 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:15:01 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 15:55:36 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -26,17 +23,18 @@
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -45,8 +43,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -59,17 +59,36 @@
# CONFIG_KMOD is not set
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
# CONFIG_IA64_GENERIC is not set
# CONFIG_IA64_DIG is not set
CONFIG_IA64_HP_ZX1=y
@@ -82,18 +101,16 @@
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_NUMA is not set
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
# CONFIG_IA64_CYCLONE is not set
CONFIG_IOSAPIC=y
-# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=16
# CONFIG_HOTPLUG_CPU is not set
@@ -106,7 +123,14 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
@@ -118,7 +142,6 @@
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
@@ -126,6 +149,7 @@
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
@@ -138,6 +162,7 @@
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
@@ -179,6 +204,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -211,14 +237,17 @@
# CONFIG_NETFILTER_DEBUG is not set
#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
#
# DCCP Configuration (EXPERIMENTAL)
@@ -229,6 +258,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -241,14 +275,16 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -310,20 +346,13 @@
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -407,13 +436,14 @@
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -421,13 +451,11 @@
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
@@ -438,17 +466,9 @@
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -465,6 +485,7 @@
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
@@ -505,6 +526,7 @@
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -555,6 +577,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -652,6 +675,7 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -703,6 +727,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -753,12 +778,19 @@
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -789,6 +821,7 @@
#
# Video Adapters
#
+# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
@@ -796,14 +829,16 @@
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
+# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_VIDEO_AUDIO_DECODER is not set
+# CONFIG_VIDEO_DECODER is not set
#
# Radio Adapters
@@ -824,7 +859,6 @@
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
@@ -833,6 +867,7 @@
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
@@ -848,10 +883,7 @@
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -860,6 +892,7 @@
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -892,6 +925,8 @@
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -900,17 +935,18 @@
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -919,39 +955,39 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=y
CONFIG_SND_FM801_TEA575X=y
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -997,12 +1033,15 @@
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1014,13 +1053,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
@@ -1034,6 +1075,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1049,6 +1091,7 @@
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
+# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
@@ -1113,7 +1156,7 @@
# CONFIG_INFINIBAND is not set
#
-# SN Devices
+# EDAC - error detection and reporting (RAS)
#
#
@@ -1135,6 +1178,7 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
@@ -1174,6 +1218,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1238,6 +1283,7 @@
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1296,26 +1342,30 @@
CONFIG_GENERIC_PENDING_IRQ=y
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+CONFIG_KPROBES=y
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-CONFIG_KPROBES=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
CONFIG_IA64_PRINT_HAZARDS=y
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index dcbc78a..3e76728 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14-rc1
-# Wed Sep 14 15:13:03 2005
+# Linux kernel version: 2.6.16-rc5
+# Mon Feb 27 16:02:28 2006
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -23,18 +22,19 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -43,8 +43,10 @@
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -59,17 +61,36 @@
CONFIG_STOP_MACHINE=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
+CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_DMA_IS_DMA32=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
@@ -89,14 +110,10 @@
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
-CONFIG_NUMA=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
-CONFIG_FORCE_MAX_ZONEORDER=18
+CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
@@ -110,19 +127,29 @@
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_NUMA=y
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
+CONFIG_SGI_SN=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
-# CONFIG_DELL_RBU is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
@@ -130,6 +157,7 @@
# Power management and ACPI
#
CONFIG_PM=y
+CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
#
@@ -144,6 +172,7 @@
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
@@ -186,6 +215,7 @@
#
# Networking options
#
+# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -220,6 +250,11 @@
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
@@ -232,14 +267,16 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
@@ -301,20 +338,13 @@
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
@@ -407,6 +437,7 @@
#
# SCSI low-level drivers
#
+# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
@@ -416,16 +447,19 @@
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_PDC_ADMA is not set
# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIL24 is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
@@ -443,14 +477,7 @@
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
CONFIG_SCSI_QLOGIC_1280=y
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -483,6 +510,7 @@
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
@@ -523,6 +551,7 @@
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -572,6 +601,7 @@
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -676,12 +706,15 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
@@ -697,6 +730,7 @@
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=6
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
@@ -710,6 +744,7 @@
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
+# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -745,10 +780,10 @@
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_RAW_DRIVER=m
+CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
-CONFIG_MAX_RAW_DEVS=256
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
@@ -756,6 +791,7 @@
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -763,6 +799,12 @@
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -772,6 +814,7 @@
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
@@ -822,26 +865,28 @@
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
-CONFIG_SND_AC97_CODEC=m
-CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -850,40 +895,40 @@
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
-CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# USB devices
@@ -929,12 +974,15 @@
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
-# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -946,12 +994,15 @@
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
@@ -971,6 +1022,7 @@
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
@@ -1050,11 +1102,17 @@
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND_SRP is not set
#
# SN Devices
#
CONFIG_SGI_IOC4=y
+CONFIG_SGI_IOC3=m
+
+#
+# EDAC - error detection and reporting (RAS)
+#
#
# File systems
@@ -1085,6 +1143,7 @@
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1126,6 +1185,7 @@
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1195,6 +1255,7 @@
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
@@ -1260,26 +1321,30 @@
# CONFIG_HP_SIMSCSI is not set
#
-# Profiling support
+# Instrumentation Support
#
# CONFIG_PROFILING is not set
+# CONFIG_KPROBES is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
-# CONFIG_KPROBES is not set
+# CONFIG_DEBUG_VM is not set
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index ac6055c..7a05b1c 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -878,8 +878,7 @@
data8 0 // timer_delete
data8 0 // clock_settime
data8 fsys_clock_gettime // clock_gettime
- #define __NR_syscall_last 1255
- .space 8*(NR_syscalls + 1024 - __NR_syscall_last), 0
-
- .org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
+ // fill in zeros for the remaining entries
+ .zero:
+ .space fsyscall_table + 8*NR_syscalls - .zero, 0
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 301f2e9..9f80569 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1362,7 +1362,6 @@
// 0x5a00 Entry 30 (size 16 bundles) Unaligned Reference (57)
ENTRY(unaligned_access)
DBG_FAULT(30)
- mov r16=cr.ipsr
mov r31=pr // prepare to save predicates
;;
br.sptk.many dispatch_unaligned_handler
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index f9e0ae9..1e35755 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -24,7 +24,7 @@
#include <asm/uaccess.h>
#include <asm/unaligned.h>
-extern void die_if_kernel(char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+extern void die_if_kernel(char *str, struct pt_regs *regs, long err);
#undef DEBUG_UNALIGNED_TRAP
@@ -53,6 +53,15 @@
#define SIGN_EXT9 0xffffffffffffff00ul
/*
+ * sysctl settable hook which tells the kernel whether to honor the
+ * IA64_THREAD_UAC_NOPRINT prctl. Because this is user settable, we want
+ * to allow the super user to enable/disable this for security reasons
+ * (i.e. don't allow attacker to fill up logs with unaligned accesses).
+ */
+int no_unaligned_warning;
+static int noprint_warning;
+
+/*
* For M-unit:
*
* opcode | m | x6 |
@@ -1324,8 +1333,9 @@
if ((current->thread.flags & IA64_THREAD_UAC_SIGBUS) != 0)
goto force_sigbus;
- if (!(current->thread.flags & IA64_THREAD_UAC_NOPRINT)
- && within_logging_rate_limit())
+ if (!no_unaligned_warning &&
+ !(current->thread.flags & IA64_THREAD_UAC_NOPRINT) &&
+ within_logging_rate_limit())
{
char buf[200]; /* comm[] is at most 16 bytes... */
size_t len;
@@ -1340,7 +1350,22 @@
if (user_mode(regs))
tty_write_message(current->signal->tty, buf);
buf[len-1] = '\0'; /* drop '\r' */
- printk(KERN_WARNING "%s", buf); /* watch for command names containing %s */
+ /* watch for command names containing %s */
+ printk(KERN_WARNING "%s", buf);
+ } else {
+ if (no_unaligned_warning && !noprint_warning) {
+ noprint_warning = 1;
+ printk(KERN_WARNING "%s(%d) encountered an "
+ "unaligned exception which required\n"
+ "kernel assistance, which degrades "
+ "the performance of the application.\n"
+ "Unaligned exception warnings have "
+ "been disabled by the system "
+ "administrator\n"
+ "echo 0 > /proc/sys/kernel/ignore-"
+ "unaligned-usertrap to re-enable\n",
+ current->comm, current->pid);
+ }
}
} else {
if (within_logging_rate_limit())
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 0b30ca0..9ba32b2 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -579,7 +579,7 @@
char * __init
pcibios_setup (char *str)
{
- return NULL;
+ return str;
}
int
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 3edef0d..dfb3f29 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -716,4 +716,3 @@
EXPORT_SYMBOL(sn_pci_controller_fixup);
EXPORT_SYMBOL(sn_bus_store_sysdata);
EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_pcidev_info_get);
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 5f68b22..e00e5f6 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -161,60 +161,6 @@
return error;
}
-struct dirent32 {
- unsigned int d_ino;
- unsigned int d_off;
- unsigned short d_reclen;
- char d_name[NAME_MAX + 1];
-};
-
-static void
-xlate_dirent(void *dirent64, void *dirent32, long n)
-{
- long off;
- struct dirent *dirp;
- struct dirent32 *dirp32;
-
- off = 0;
- while (off < n) {
- dirp = (struct dirent *)(dirent64 + off);
- dirp32 = (struct dirent32 *)(dirent32 + off);
- off += dirp->d_reclen;
- dirp32->d_ino = dirp->d_ino;
- dirp32->d_off = (unsigned int)dirp->d_off;
- dirp32->d_reclen = dirp->d_reclen;
- strncpy(dirp32->d_name, dirp->d_name, dirp->d_reclen - ((3 * 4) + 2));
- }
- return;
-}
-
-asmlinkage long
-sys32_getdents(unsigned int fd, void * dirent32, unsigned int count)
-{
- long n;
- void *dirent64;
-
- dirent64 = (void *)((unsigned long)(dirent32 + (sizeof(long) - 1)) & ~(sizeof(long) - 1));
- if ((n = sys_getdents(fd, dirent64, count - (dirent64 - dirent32))) < 0)
- return(n);
- xlate_dirent(dirent64, dirent32, n);
- return(n);
-}
-
-asmlinkage int old_readdir(unsigned int fd, void * dirent, unsigned int count);
-
-asmlinkage int
-sys32_readdir(unsigned int fd, void * dirent32, unsigned int count)
-{
- int n;
- struct dirent dirent64;
-
- if ((n = old_readdir(fd, &dirent64, count)) < 0)
- return(n);
- xlate_dirent(&dirent64, dirent32, dirent64.d_reclen);
- return(n);
-}
-
asmlinkage int
sys32_waitpid(compat_pid_t pid, unsigned int *stat_addr, int options)
{
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index d87b544..02c8267 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -195,7 +195,7 @@
PTR sys_fdatasync
PTR sys_truncate
PTR sys_ftruncate /* 6075 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR sys_getcwd
PTR sys_chdir
PTR sys_fchdir
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 5b04140..797e0d8 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -293,7 +293,7 @@
PTR sys_uselib
PTR sys_swapon
PTR sys_reboot
- PTR sys32_readdir
+ PTR compat_sys_old_readdir
PTR old_mmap /* 4090 */
PTR sys_munmap
PTR sys_truncate
@@ -345,7 +345,7 @@
PTR sys_setfsuid
PTR sys_setfsgid
PTR sys32_llseek /* 4140 */
- PTR sys32_getdents
+ PTR compat_sys_getdents
PTR compat_sys_select
PTR sys_flock
PTR sys_msync
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index d86affa..d9293c5 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -540,6 +540,9 @@
sparse_init();
paging_init();
resource_init();
+#ifdef CONFIG_SMP
+ plat_smp_setup();
+#endif
}
int __init fpu_disable(char *s)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 5e18986..06ed907 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -236,7 +236,7 @@
init_new_context(current, &init_mm);
current_thread_info()->cpu = 0;
smp_tune_scheduling();
- prom_prepare_cpus(max_cpus);
+ plat_prepare_cpus(max_cpus);
}
/* preload SMP state for boot cpu */
diff --git a/arch/mips/kernel/smp_mt.c b/arch/mips/kernel/smp_mt.c
index c930364..993b8bf 100644
--- a/arch/mips/kernel/smp_mt.c
+++ b/arch/mips/kernel/smp_mt.c
@@ -143,7 +143,7 @@
* Make sure all CPU's are in a sensible state before we boot any of the
* secondarys
*/
-void prom_prepare_cpus(unsigned int max_cpus)
+void plat_smp_setup(void)
{
unsigned long val;
int i, num;
@@ -179,11 +179,9 @@
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
- if (i < max_cpus) {
- cpu_set(i, phys_cpu_present_map);
- __cpu_number_map[i] = ++num;
- __cpu_logical_map[num] = i;
- }
+ cpu_set(i, phys_cpu_present_map);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
}
/* disable multi-threading with TC's */
@@ -241,7 +239,10 @@
set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 7050b4f..42c94c7 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -163,7 +163,7 @@
unsigned long seq;
unsigned long lost;
unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
+ unsigned long max_ntp_tick;
do {
seq = read_seqbegin(&xtime_lock);
@@ -178,12 +178,13 @@
* Better to lose some accuracy than have time go backwards..
*/
if (unlikely(time_adjust < 0)) {
+ max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
usec = min(usec, max_ntp_tick);
if (lost)
usec += lost * max_ntp_tick;
} else if (unlikely(lost))
- usec += lost * tick_usec;
+ usec += lost * (USEC_PER_SEC / HZ);
sec = xtime.tv_sec;
usec += (xtime.tv_nsec / 1000);
diff --git a/arch/mips/lib/iomap.c b/arch/mips/lib/iomap.c
index 7e2ced71..f4ac5bb 100644
--- a/arch/mips/lib/iomap.c
+++ b/arch/mips/lib/iomap.c
@@ -63,7 +63,7 @@
return ioport_map(start, len);
if (flags & IORESOURCE_MEM) {
if (flags & IORESOURCE_CACHEABLE)
- return ioremap_cacheable_cow(start, len);
+ return ioremap_cachable(start, len);
return ioremap_nocache(start, len);
}
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 1b71d91..0668e9b 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -235,7 +235,9 @@
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page = blast_scache16_page;
else if (sc_lsize == 32)
r4k_blast_scache_page = blast_scache32_page;
@@ -251,7 +253,9 @@
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache_page_indexed = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
else if (sc_lsize == 32)
r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
@@ -267,7 +271,9 @@
{
unsigned long sc_lsize = cpu_scache_line_size();
- if (sc_lsize == 16)
+ if (scache_size == 0)
+ r4k_blast_scache = (void *)no_sc_noop;
+ else if (sc_lsize == 16)
r4k_blast_scache = blast_scache16;
else if (sc_lsize == 32)
r4k_blast_scache = blast_scache32;
@@ -482,7 +488,7 @@
protected_blast_dcache_range(start, end);
}
- if (!cpu_icache_snoops_remote_store) {
+ if (!cpu_icache_snoops_remote_store && scache_size) {
if (end - start > scache_size)
r4k_blast_scache();
else
@@ -651,7 +657,7 @@
R4600_HIT_CACHEOP_WAR_IMPL;
protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
- if (!cpu_icache_snoops_remote_store)
+ if (!cpu_icache_snoops_remote_store && scache_size)
protected_writeback_scache_line(addr & ~(sc_lsize - 1));
protected_flush_icache_line(addr & ~(ic_lsize - 1));
if (MIPS4K_ICACHE_REFILL_WAR) {
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 7f8fda9..c197311 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -50,37 +50,25 @@
* We don't want to start the secondary CPU yet nor do we have a nice probing
* feature in PMON so we just assume presence of the secondary core.
*/
-static char maxcpus_string[] __initdata =
- KERN_WARNING "max_cpus set to 0; using 1 instead\n";
-
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
- int enabled = 0, i;
-
- if (max_cpus == 0) {
- printk(maxcpus_string);
- max_cpus = 1;
- }
+ int i;
cpus_clear(phys_cpu_present_map);
for (i = 0; i < 2; i++) {
- if (i == max_cpus)
- break;
-
- /*
- * The boot CPU
- */
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = i;
__cpu_logical_map[i] = i;
- enabled++;
}
+}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
/*
* Be paranoid. Enable the IPI only if we're really about to go SMP.
*/
- if (enabled > 1)
+ if (cpus_weight(cpu_possible_map))
set_c0_status(STATUSF_IP5);
}
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index dbef3f6..09fa7f5 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -140,7 +140,7 @@
REMOTE_HUB_CLR_INTR(nasid, i);
}
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
cnodeid_t cnode;
@@ -161,6 +161,11 @@
alloc_cpupda(0, 0);
}
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
+ /* We already did everything necessary earlier */
+}
+
/*
* Launch a slave into smp_bootstrap(). It doesn't take an argument, and we
* set sp to the kernel stack of the newly created idle process, gp to the proc
diff --git a/arch/mips/sibyte/cfe/smp.c b/arch/mips/sibyte/cfe/smp.c
index 4477af3..eab20e2 100644
--- a/arch/mips/sibyte/cfe/smp.c
+++ b/arch/mips/sibyte/cfe/smp.c
@@ -31,7 +31,7 @@
*
* Common setup before any secondaries are started
*/
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void __init plat_smp_setup(void)
{
int i, num;
@@ -40,14 +40,18 @@
__cpu_number_map[0] = 0;
__cpu_logical_map[0] = 0;
- for (i=1, num=0; i<NR_CPUS; i++) {
+ for (i = 1, num = 0; i < NR_CPUS; i++) {
if (cfe_cpu_stop(i) == 0) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
}
- printk("Detected %i available secondary CPU(s)\n", num);
+ printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
}
/*
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 80d114a..a834f9e 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -963,7 +963,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
- depends on PPC64
+ depends on PPC64 && EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index f0c47da..04f7df3 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -182,8 +182,8 @@
unsigned long offset = address - vma->vm_start;
struct page *pg;
#ifdef CONFIG_PPC64
- void *vbase = test_thread_flag(TIF_32BIT) ?
- vdso32_kbase : vdso64_kbase;
+ void *vbase = (vma->vm_mm->task_size > TASK_SIZE_USER32) ?
+ vdso64_kbase : vdso32_kbase;
#else
void *vbase = vdso32_kbase;
#endif
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index ccaeda5..4ee871f 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -225,9 +225,9 @@
.cfi_startproc
/* check for update count & load values */
1: ld r8,CFG_TB_UPDATE_COUNT(r3)
- andi. r0,r4,1 /* pending update ? loop */
+ andi. r0,r8,1 /* pending update ? loop */
bne- 1b
- xor r0,r4,r4 /* create dependency */
+ xor r0,r8,r8 /* create dependency */
add r3,r3,r0
/* Get TB & offset it */
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index b1f614c..e9d589e 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -169,7 +169,7 @@
#ifdef CONFIG_PPC_ISERIES
if (_machine == PLATFORM_ISERIES_LPAR)
ret = iSeries_hpte_insert(hpteg, va,
- virt_to_abs(paddr),
+ __pa(vaddr),
tmp_mode,
HPTE_V_BOLTED,
psize);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 8357831..2ab9dcd 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -893,6 +893,20 @@
}
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
+void eeh_add_device_tree_late(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ eeh_add_device_late(dev);
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+ struct pci_bus *subbus = dev->subordinate;
+ if (subbus)
+ eeh_add_device_tree_late(subbus);
+ }
+ }
+}
+
/**
* eeh_add_device_late - perform EEH initialization for the indicated pci device
* @dev: pci device for which to set up EEH
diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c
index e3cbba4..b811d5f 100644
--- a/arch/powerpc/platforms/pseries/eeh_driver.c
+++ b/arch/powerpc/platforms/pseries/eeh_driver.c
@@ -37,7 +37,7 @@
static inline const char * pcid_name (struct pci_dev *pdev)
{
- if (pdev->dev.driver)
+ if (pdev && pdev->dev.driver)
return pdev->dev.driver->name;
return "";
}
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index bdaa8aa..f3bad90 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -106,6 +106,8 @@
}
}
}
+
+ eeh_add_device_tree_late(bus);
}
EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices);
@@ -114,7 +116,6 @@
{
u8 sec_busno;
struct pci_bus *child_bus;
- struct pci_dev *child_dev;
/* Get busno of downstream bus */
pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno);
@@ -129,10 +130,6 @@
pci_scan_child_bus(child_bus);
- list_for_each_entry(child_dev, &child_bus->devices, bus_list) {
- eeh_add_device_late(child_dev);
- }
-
/* Fixup new pci devices without touching bus struct */
pcibios_fixup_new_pci_devices(child_bus, 0);
@@ -160,18 +157,25 @@
eeh_add_device_tree_early(dn);
- /* pci_scan_slot should find all children */
- slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
- num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
- if (num) {
- pcibios_fixup_new_pci_devices(bus, 1);
- pci_bus_add_devices(bus);
- }
+ if (_machine == PLATFORM_PSERIES_LPAR) {
+ /* use ofdt-based probe */
+ of_scan_bus(dn, bus);
+ if (!list_empty(&bus->devices)) {
+ pcibios_fixup_new_pci_devices(bus, 0);
+ pci_bus_add_devices(bus);
+ }
+ } else {
+ /* use legacy probe */
+ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn);
+ num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
+ if (num) {
+ pcibios_fixup_new_pci_devices(bus, 1);
+ pci_bus_add_devices(bus);
+ }
- list_for_each_entry(dev, &bus->devices, bus_list) {
- eeh_add_device_late (dev);
- if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
- pcibios_pci_config_bridge(dev);
+ list_for_each_entry(dev, &bus->devices, bus_list)
+ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ pcibios_pci_config_bridge(dev);
}
}
EXPORT_SYMBOL_GPL(pcibios_add_pci_devices);
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index ab733be..4c0a50a 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -383,6 +383,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index 054461e..158bd31 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -542,6 +542,8 @@
}
#endif
+ smp_setup_cpu_possible_map();
+
paging_init();
}
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 1fb6323..1f7ad8a 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1079,18 +1079,12 @@
return 0;
}
+/* Constrain the number of cpus to max_cpus. */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
- int instance, mid;
-
- instance = 0;
- while (!cpu_find_by_instance(instance, NULL, &mid)) {
- if (mid < max_cpus)
- cpu_set(mid, phys_cpu_present_map);
- instance++;
- }
-
if (num_possible_cpus() > max_cpus) {
+ int instance, mid;
+
instance = 0;
while (!cpu_find_by_instance(instance, NULL, &mid)) {
if (mid != boot_cpu_id) {
@@ -1105,6 +1099,22 @@
smp_store_cpu_info(boot_cpu_id);
}
+/* Set this up early so that things like the scheduler can init
+ * properly. We use the same cpu mask for both the present and
+ * possible cpu map.
+ */
+void __init smp_setup_cpu_possible_map(void)
+{
+ int instance, mid;
+
+ instance = 0;
+ while (!cpu_find_by_instance(instance, NULL, &mid)) {
+ if (mid < NR_CPUS)
+ cpu_set(mid, phys_cpu_present_map);
+ instance++;
+ }
+}
+
void __devinit smp_prepare_boot_cpu(void)
{
if (hard_smp_processor_id() >= NR_CPUS) {
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index babc31b..e18eb79 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -577,6 +577,7 @@
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && MODULES
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index d70605e..e5b14c5 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -962,14 +962,12 @@
irq_exit();
}
-int __initdata unsync_tsc_on_multicluster;
-
/*
* oem_force_hpet_timer -- force HPET mode for some boxes.
*
* Thus far, the major user of this is IBM's Summit2 series:
*
- * Some clustered boxes may have unsynced TSC problems if they are
+ * Clustered boxes may have unsynced TSC problems if they are
* multi-chassis. Use available data to take a good guess.
* If in doubt, go HPET.
*/
@@ -979,11 +977,6 @@
unsigned id;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /* Only do this check on IBM machines - big Unisys systems
- use multiple clusters too, but have synchronized TSC */
- if (!unsync_tsc_on_multicluster)
- return 0;
-
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
for (i = 0; i < NR_CPUS; i++) {
diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
index 5de7eaf..aa55e3c 100644
--- a/arch/x86_64/kernel/setup.c
+++ b/arch/x86_64/kernel/setup.c
@@ -424,7 +424,7 @@
elfcorehdr_addr = memparse(from+11, &from);
#endif
-#ifdef CONFIG_SMP
+#ifdef CONFIG_HOTPLUG_CPU
else if (!memcmp(from, "additional_cpus=", 16))
setup_additional_cpus(from+16);
#endif
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 74fae2d..c8dbe38 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -239,7 +239,6 @@
CFQ_CFQQ_FLAG_fifo_expire,
CFQ_CFQQ_FLAG_idle_window,
CFQ_CFQQ_FLAG_prio_changed,
- CFQ_CFQQ_FLAG_expired,
};
#define CFQ_CFQQ_FNS(name) \
@@ -264,7 +263,6 @@
CFQ_CFQQ_FNS(fifo_expire);
CFQ_CFQQ_FNS(idle_window);
CFQ_CFQQ_FNS(prio_changed);
-CFQ_CFQQ_FNS(expired);
#undef CFQ_CFQQ_FNS
enum cfq_rq_state_flags {
@@ -336,7 +334,7 @@
*/
static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
{
- if (!cfqd->rq_in_driver && cfqd->busy_queues)
+ if (cfqd->busy_queues)
kblockd_schedule_work(&cfqd->unplug_work);
}
@@ -736,13 +734,63 @@
cfqq->slice_left = 0;
cfq_clear_cfqq_must_alloc_slice(cfqq);
cfq_clear_cfqq_fifo_expire(cfqq);
- cfq_clear_cfqq_expired(cfqq);
}
cfqd->active_queue = cfqq;
}
/*
+ * current cfqq expired its slice (or was too idle), select new one
+ */
+static void
+__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ int preempted)
+{
+ unsigned long now = jiffies;
+
+ if (cfq_cfqq_wait_request(cfqq))
+ del_timer(&cfqd->idle_slice_timer);
+
+ if (!preempted && !cfq_cfqq_dispatched(cfqq)) {
+ cfqq->service_last = now;
+ cfq_schedule_dispatch(cfqd);
+ }
+
+ cfq_clear_cfqq_must_dispatch(cfqq);
+ cfq_clear_cfqq_wait_request(cfqq);
+
+ /*
+ * store what was left of this slice, if the queue idled out
+ * or was preempted
+ */
+ if (time_after(cfqq->slice_end, now))
+ cfqq->slice_left = cfqq->slice_end - now;
+ else
+ cfqq->slice_left = 0;
+
+ if (cfq_cfqq_on_rr(cfqq))
+ cfq_resort_rr_list(cfqq, preempted);
+
+ if (cfqq == cfqd->active_queue)
+ cfqd->active_queue = NULL;
+
+ if (cfqd->active_cic) {
+ put_io_context(cfqd->active_cic->ioc);
+ cfqd->active_cic = NULL;
+ }
+
+ cfqd->dispatch_slice = 0;
+}
+
+static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
+{
+ struct cfq_queue *cfqq = cfqd->active_queue;
+
+ if (cfqq)
+ __cfq_slice_expired(cfqd, cfqq, preempted);
+}
+
+/*
* 0
* 0,1
* 0,1,2
@@ -801,16 +849,7 @@
static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
-
- /*
- * if current queue is expired but not done with its requests yet,
- * wait for that to happen
- */
- if ((cfqq = cfqd->active_queue) != NULL) {
- if (cfq_cfqq_expired(cfqq) && cfq_cfqq_dispatched(cfqq))
- return NULL;
- }
+ struct cfq_queue *cfqq = NULL;
/*
* if current list is non-empty, grab first entry. if it is empty,
@@ -837,66 +876,11 @@
return cfqq;
}
-/*
- * current cfqq expired its slice (or was too idle), select new one
- */
-static void
-__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- int preempted)
-{
- unsigned long now = jiffies;
-
- if (cfq_cfqq_wait_request(cfqq))
- del_timer(&cfqd->idle_slice_timer);
-
- if (!preempted && !cfq_cfqq_dispatched(cfqq))
- cfqq->service_last = now;
-
- cfq_clear_cfqq_must_dispatch(cfqq);
- cfq_clear_cfqq_wait_request(cfqq);
-
- /*
- * store what was left of this slice, if the queue idled out
- * or was preempted
- */
- if (time_after(cfqq->slice_end, now))
- cfqq->slice_left = cfqq->slice_end - now;
- else
- cfqq->slice_left = 0;
-
- if (cfq_cfqq_on_rr(cfqq))
- cfq_resort_rr_list(cfqq, preempted);
-
- if (cfqq == cfqd->active_queue)
- cfqd->active_queue = NULL;
-
- if (cfqd->active_cic) {
- put_io_context(cfqd->active_cic->ioc);
- cfqd->active_cic = NULL;
- }
-
- cfqd->dispatch_slice = 0;
-}
-
-static inline void cfq_slice_expired(struct cfq_data *cfqd, int preempted)
-{
- struct cfq_queue *cfqq = cfqd->active_queue;
-
- if (cfqq) {
- /*
- * use deferred expiry, if there are requests in progress as
- * not to disturb the slice of the next queue
- */
- if (cfq_cfqq_dispatched(cfqq))
- cfq_mark_cfqq_expired(cfqq);
- else
- __cfq_slice_expired(cfqd, cfqq, preempted);
- }
-}
-
static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
+ unsigned long sl;
+
WARN_ON(!RB_EMPTY(&cfqq->sort_list));
WARN_ON(cfqq != cfqd->active_queue);
@@ -916,13 +900,8 @@
cfq_mark_cfqq_must_dispatch(cfqq);
cfq_mark_cfqq_wait_request(cfqq);
- if (!timer_pending(&cfqd->idle_slice_timer)) {
- unsigned long slice_left = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
-
- cfqd->idle_slice_timer.expires = jiffies + slice_left;
- add_timer(&cfqd->idle_slice_timer);
- }
-
+ sl = min(cfqq->slice_end - 1, (unsigned long) cfqd->cfq_slice_idle);
+ mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
return 1;
}
@@ -1006,9 +985,6 @@
if (!cfqq)
goto new_queue;
- if (cfq_cfqq_expired(cfqq))
- goto new_queue;
-
/*
* slice has expired
*/
@@ -1181,10 +1157,8 @@
BUG_ON(cfqq->allocated[READ] + cfqq->allocated[WRITE]);
BUG_ON(cfq_cfqq_on_rr(cfqq));
- if (unlikely(cfqd->active_queue == cfqq)) {
+ if (unlikely(cfqd->active_queue == cfqq))
__cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_cfqd(cfqq->cfqd);
@@ -1245,10 +1219,8 @@
spin_lock(q->queue_lock);
- if (unlikely(cic->cfqq == cfqd->active_queue)) {
+ if (unlikely(cic->cfqq == cfqd->active_queue))
__cfq_slice_expired(cfqd, cic->cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
cfq_put_queue(cic->cfqq);
cic->cfqq = NULL;
@@ -1715,10 +1687,7 @@
cfqq->service_last = now;
cfq_resort_rr_list(cfqq, 0);
}
- if (cfq_cfqq_expired(cfqq)) {
- __cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
+ cfq_schedule_dispatch(cfqd);
}
if (cfq_crq_is_sync(crq))
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index 649677b..5fdf185 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -13,11 +13,12 @@
*
* (C) 2000,2001,2002,2003,2004 Omnikey AG
*
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
* - Adhere to Kernel CodingStyle
* - Port to 2.6.13 "new" style PCMCIA
* - Check for copy_{from,to}_user return values
* - Use nonseekable_open()
+ * - add class interface for udev device creation
*
* All rights reserved. Licensed under dual BSD/GPL license.
*/
@@ -56,7 +57,7 @@
#else
#define DEBUGP(n, rdr, x, args...)
#endif
-static char *version = "cm4000_cs.c v2.4.0gm5 - All bugs added by Harald Welte";
+static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte";
#define T_1SEC (HZ)
#define T_10MSEC msecs_to_jiffies(10)
@@ -156,6 +157,7 @@
/*queue*/ 4*sizeof(wait_queue_head_t))
static dev_link_t *dev_table[CM4000_MAX_DEV];
+static struct class *cmm_class;
/* This table doesn't use spaces after the comma between fields and thus
* violates CodingStyle. However, I don't really think wrapping it around will
@@ -1937,6 +1939,9 @@
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
cm4000_config(link, i);
+ class_device_create(cmm_class, NULL, MKDEV(major, i), NULL,
+ "cmm%d", i);
+
return 0;
}
@@ -1962,6 +1967,8 @@
dev_table[devno] = NULL;
kfree(dev);
+ class_device_destroy(cmm_class, MKDEV(major, devno));
+
return;
}
@@ -1995,8 +2002,18 @@
static int __init cmm_init(void)
{
+ int rc;
+
printk(KERN_INFO "%s\n", version);
- pcmcia_register_driver(&cm4000_driver);
+
+ cmm_class = class_create(THIS_MODULE, "cardman_4000");
+ if (!cmm_class)
+ return -1;
+
+ rc = pcmcia_register_driver(&cm4000_driver);
+ if (rc < 0)
+ return rc;
+
major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
@@ -2012,6 +2029,7 @@
printk(KERN_INFO MODULE_NAME ": unloading\n");
pcmcia_unregister_driver(&cm4000_driver);
unregister_chrdev(major, DEVICE_NAME);
+ class_destroy(cmm_class);
};
module_init(cmm_init);
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 46eb371..466e33b 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -3,12 +3,13 @@
*
* (c) 2000-2004 Omnikey AG (http://www.omnikey.com/)
*
- * (C) 2005 Harald Welte <laforge@gnumonks.org>
+ * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
* - add support for poll()
* - driver cleanup
* - add waitqueues
* - adhere to linux kernel coding style and policies
* - support 2.6.13 "new style" pcmcia interface
+ * - add class interface for udev device creation
*
* The device basically is a USB CCID compliant device that has been
* attached to an I/O-Mapped FIFO.
@@ -53,7 +54,7 @@
#endif
static char *version =
-"OMNIKEY CardMan 4040 v1.1.0gm4 - All bugs added by Harald Welte";
+"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte";
#define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ)
#define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ)
@@ -67,6 +68,7 @@
static void reader_release(dev_link_t *link);
static int major;
+static struct class *cmx_class;
#define BS_READABLE 0x01
#define BS_WRITABLE 0x02
@@ -696,6 +698,9 @@
link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
reader_config(link, i);
+ class_device_create(cmx_class, NULL, MKDEV(major, i), NULL,
+ "cmx%d", i);
+
return 0;
}
@@ -721,6 +726,8 @@
dev_table[devno] = NULL;
kfree(dev);
+ class_device_destroy(cmx_class, MKDEV(major, devno));
+
return;
}
@@ -755,8 +762,17 @@
static int __init cm4040_init(void)
{
+ int rc;
+
printk(KERN_INFO "%s\n", version);
- pcmcia_register_driver(&reader_driver);
+ cmx_class = class_create(THIS_MODULE, "cardman_4040");
+ if (!cmx_class)
+ return -1;
+
+ rc = pcmcia_register_driver(&reader_driver);
+ if (rc < 0)
+ return rc;
+
major = register_chrdev(0, DEVICE_NAME, &reader_fops);
if (major < 0) {
printk(KERN_WARNING MODULE_NAME
@@ -771,6 +787,7 @@
printk(KERN_INFO MODULE_NAME ": unloading\n");
pcmcia_unregister_driver(&reader_driver);
unregister_chrdev(major, DEVICE_NAME);
+ class_destroy(cmx_class);
}
module_init(cm4040_init);
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index 588e75e..a6b4f02 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -1095,17 +1095,17 @@
sx_dprintk (SX_DEBUG_RECEIVE, "rxop=%d, c = %d.\n", rx_op, c);
+ /* Don't copy past the end of the hardware receive buffer */
+ if (rx_op + c > 0x100) c = 0x100 - rx_op;
+
+ sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
+
/* Don't copy more bytes than there is room for in the buffer */
c = tty_prepare_flip_string(tty, &rp, c);
sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
- /* Don't copy past the end of the hardware receive buffer */
- if (rx_op + c > 0x100) c = 0x100 - rx_op;
-
- sx_dprintk (SX_DEBUG_RECEIVE, "c = %d.\n", c);
-
/* If for one reason or another, we can't copy more data, we're done! */
if (c == 0) break;
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index a85a60a..b046390 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -306,7 +306,7 @@
int tx_active;
unsigned char signals; /* serial signal states */
- unsigned int init_error; /* initialization error */
+ int init_error; /* initialization error */
unsigned char *tx_buf;
int tx_count;
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index e9bba94..53d3d06 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -303,7 +303,7 @@
t->commit = 0;
t->read = 0;
/* DEBUG ONLY */
- memset(t->data, '*', size);
+/* memset(t->data, '*', size); */
/* printk("Flip recycle %p\n", t); */
return t;
}
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index 4c2af90..6213bd3 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -445,6 +445,7 @@
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
+ PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
diff --git a/drivers/ieee1394/video1394.c b/drivers/ieee1394/video1394.c
index 39fb883..216dbbf 100644
--- a/drivers/ieee1394/video1394.c
+++ b/drivers/ieee1394/video1394.c
@@ -744,7 +744,7 @@
if (i == ISO_CHANNELS) {
PRINT(KERN_ERR, ohci->host->id,
"No free channel found");
- return EAGAIN;
+ return -EAGAIN;
}
if (!(ohci->ISO_channel_usage & mask)) {
v.channel = i;
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 7b7ca5a..8815c8d 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -1,5 +1,5 @@
/*
- * $Id: redboot.c,v 1.18 2005/11/07 11:14:21 gleixner Exp $
+ * $Id: redboot.c,v 1.19 2005/12/01 10:03:51 dwmw2 Exp $
*
* Parse RedBoot-style Flash Image System (FIS) tables and
* produce a Linux partition array to match.
@@ -89,8 +89,32 @@
i = numslots;
break;
}
- if (!memcmp(buf[i].name, "FIS directory", 14))
+ if (!memcmp(buf[i].name, "FIS directory", 14)) {
+ /* This is apparently the FIS directory entry for the
+ * FIS directory itself. The FIS directory size is
+ * one erase block; if the buf[i].size field is
+ * swab32(erasesize) then we know we are looking at
+ * a byte swapped FIS directory - swap all the entries!
+ * (NOTE: this is 'size' not 'data_length'; size is
+ * the full size of the entry.)
+ */
+ if (swab32(buf[i].size) == master->erasesize) {
+ int j;
+ for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
+ /* The unsigned long fields were written with the
+ * wrong byte sex, name and pad have no byte sex.
+ */
+ swab32s(&buf[j].flash_base);
+ swab32s(&buf[j].mem_base);
+ swab32s(&buf[j].size);
+ swab32s(&buf[j].entry_point);
+ swab32s(&buf[j].data_length);
+ swab32s(&buf[j].desc_cksum);
+ swab32s(&buf[j].file_cksum);
+ }
+ }
break;
+ }
}
if (i == numslots) {
/* Didn't find it */
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index f822cd3..dd41049 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1118,13 +1118,18 @@
return -ENOMEM;
}
+static void cp_init_rings_index (struct cp_private *cp)
+{
+ cp->rx_tail = 0;
+ cp->tx_head = cp->tx_tail = 0;
+}
+
static int cp_init_rings (struct cp_private *cp)
{
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
- cp->rx_tail = 0;
- cp->tx_head = cp->tx_tail = 0;
+ cp_init_rings_index(cp);
return cp_refill_rx (cp);
}
@@ -1886,30 +1891,30 @@
spin_unlock_irqrestore (&cp->lock, flags);
- if (cp->pdev && cp->wol_enabled) {
- pci_save_state (cp->pdev);
- cp_set_d3_state (cp);
- }
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int cp_resume (struct pci_dev *pdev)
{
- struct net_device *dev;
- struct cp_private *cp;
+ struct net_device *dev = pci_get_drvdata (pdev);
+ struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
- dev = pci_get_drvdata (pdev);
- cp = netdev_priv(dev);
+ if (!netif_running(dev))
+ return 0;
netif_device_attach (dev);
-
- if (cp->pdev && cp->wol_enabled) {
- pci_set_power_state (cp->pdev, PCI_D0);
- pci_restore_state (cp->pdev);
- }
-
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ /* FIXME: sh*t may happen if the Rx ring buffer is depleted */
+ cp_init_rings_index (cp);
cp_init_hw (cp);
netif_start_queue (dev);
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 27c7730..99baf0e 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -225,9 +225,6 @@
struct e1000_ps_page *ps_page;
struct e1000_ps_page_dma *ps_page_dma;
- struct sk_buff *rx_skb_top;
- struct sk_buff *rx_skb_prev;
-
/* cpu for rx queue */
int cpu;
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 31e3329..5b7d0f4 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -103,7 +103,7 @@
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "6.3.9-k2"DRIVERNAPI
+#define DRV_VERSION "6.3.9-k4"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
@@ -1635,8 +1635,6 @@
rxdr->next_to_clean = 0;
rxdr->next_to_use = 0;
- rxdr->rx_skb_top = NULL;
- rxdr->rx_skb_prev = NULL;
return 0;
}
@@ -1713,8 +1711,23 @@
rctl |= adapter->rx_buffer_len << 0x11;
} else {
rctl &= ~E1000_RCTL_SZ_4096;
- rctl &= ~E1000_RCTL_BSEX;
- rctl |= E1000_RCTL_SZ_2048;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
}
#ifndef CONFIG_E1000_DISABLE_PACKET_SPLIT
@@ -2107,16 +2120,6 @@
}
}
- /* there also may be some cached data in our adapter */
- if (rx_ring->rx_skb_top) {
- dev_kfree_skb(rx_ring->rx_skb_top);
-
- /* rx_skb_prev will be wiped out by rx_skb_top */
- rx_ring->rx_skb_top = NULL;
- rx_ring->rx_skb_prev = NULL;
- }
-
-
size = sizeof(struct e1000_buffer) * rx_ring->count;
memset(rx_ring->buffer_info, 0, size);
size = sizeof(struct e1000_ps_page) * rx_ring->count;
@@ -3106,24 +3109,27 @@
break;
}
- /* since the driver code now supports splitting a packet across
- * multiple descriptors, most of the fifo related limitations on
- * jumbo frame traffic have gone away.
- * simply use 2k descriptors for everything.
- *
- * NOTE: dev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
- * means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size
- * i.e. RXBUFFER_2048 --> size-4096 slab */
- /* recent hardware supports 1KB granularity */
if (adapter->hw.mac_type > e1000_82547_rev_2) {
- adapter->rx_buffer_len =
- ((max_frame < E1000_RXBUFFER_2048) ?
- max_frame : E1000_RXBUFFER_2048);
+ adapter->rx_buffer_len = max_frame;
E1000_ROUNDUP(adapter->rx_buffer_len, 1024);
- } else
- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ } else {
+ if(unlikely((adapter->hw.mac_type < e1000_82543) &&
+ (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) {
+ DPRINTK(PROBE, ERR, "Jumbo Frames not supported "
+ "on 82542\n");
+ return -EINVAL;
+ } else {
+ if(max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else if(max_frame <= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = E1000_RXBUFFER_4096;
+ else if(max_frame <= E1000_RXBUFFER_8192)
+ adapter->rx_buffer_len = E1000_RXBUFFER_8192;
+ else if(max_frame <= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+ }
+ }
netdev->mtu = new_mtu;
@@ -3620,7 +3626,7 @@
uint8_t last_byte;
unsigned int i;
int cleaned_count = 0;
- boolean_t cleaned = FALSE, multi_descriptor = FALSE;
+ boolean_t cleaned = FALSE;
i = rx_ring->next_to_clean;
rx_desc = E1000_RX_DESC(*rx_ring, i);
@@ -3652,43 +3658,12 @@
length = le16_to_cpu(rx_desc->length);
- skb_put(skb, length);
-
- if (!(status & E1000_RXD_STAT_EOP)) {
- if (!rx_ring->rx_skb_top) {
- rx_ring->rx_skb_top = skb;
- rx_ring->rx_skb_top->len = length;
- rx_ring->rx_skb_prev = skb;
- } else {
- if (skb_shinfo(rx_ring->rx_skb_top)->frag_list) {
- rx_ring->rx_skb_prev->next = skb;
- skb->prev = rx_ring->rx_skb_prev;
- } else {
- skb_shinfo(rx_ring->rx_skb_top)->frag_list = skb;
- }
- rx_ring->rx_skb_prev = skb;
- rx_ring->rx_skb_top->data_len += length;
- }
+ if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+ /* All receives must fit into a single buffer */
+ E1000_DBG("%s: Receive packet consumed multiple"
+ " buffers\n", netdev->name);
+ dev_kfree_skb_irq(skb);
goto next_desc;
- } else {
- if (rx_ring->rx_skb_top) {
- if (skb_shinfo(rx_ring->rx_skb_top)
- ->frag_list) {
- rx_ring->rx_skb_prev->next = skb;
- skb->prev = rx_ring->rx_skb_prev;
- } else
- skb_shinfo(rx_ring->rx_skb_top)
- ->frag_list = skb;
-
- rx_ring->rx_skb_top->data_len += length;
- rx_ring->rx_skb_top->len +=
- rx_ring->rx_skb_top->data_len;
-
- skb = rx_ring->rx_skb_top;
- multi_descriptor = TRUE;
- rx_ring->rx_skb_top = NULL;
- rx_ring->rx_skb_prev = NULL;
- }
}
if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
@@ -3712,10 +3687,7 @@
* performance for small packets with large amounts
* of reassembly being done in the stack */
#define E1000_CB_LENGTH 256
- if ((length < E1000_CB_LENGTH) &&
- !rx_ring->rx_skb_top &&
- /* or maybe (status & E1000_RXD_STAT_EOP) && */
- !multi_descriptor) {
+ if (length < E1000_CB_LENGTH) {
struct sk_buff *new_skb =
dev_alloc_skb(length + NET_IP_ALIGN);
if (new_skb) {
@@ -3729,7 +3701,8 @@
skb = new_skb;
skb_put(skb, length);
}
- }
+ } else
+ skb_put(skb, length);
/* end copybreak code */
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 01ddfc8..aa55813 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -806,6 +806,7 @@
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1106),
PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab),
+ PCMCIA_DEVICE_PROD_ID12("AmbiCom,Inc.", "Fast Ethernet PC Card(AMB8110)", 0x49b020a7, 0x119cc9fc),
PCMCIA_DEVICE_PROD_ID124("Fast Ethernet", "16-bit PC Card", "AX88190", 0xb4be14e3, 0x9a12eb6a, 0xab9be5ef),
PCMCIA_DEVICE_PROD_ID12("ASIX", "AX88190", 0x0959823b, 0xab9be5ef),
PCMCIA_DEVICE_PROD_ID12("Billionton", "LNA-100B", 0x552ab682, 0xbc3b87e1),
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 3d95fa2..7a952fe 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -540,7 +540,7 @@
printk("%2.2x.\n", net_dev->dev_addr[i]);
/* Detect Wake on Lan support */
- ret = inl(CFGPMC & PMESP);
+ ret = (inl(net_dev->base_addr + CFGPMC) & PMESP) >> 27;
if (netif_msg_probe(sis_priv) && (ret & PME_D3C) == 0)
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
@@ -2040,7 +2040,7 @@
if (wol->wolopts == 0) {
pci_read_config_dword(sis_priv->pci_dev, CFGPMCSR, &cfgpmcsr);
- cfgpmcsr |= ~PME_EN;
+ cfgpmcsr &= ~PME_EN;
pci_write_config_dword(sis_priv->pci_dev, CFGPMCSR, cfgpmcsr);
outl(pmctrl_bits, pmctrl_addr);
if (netif_msg_wol(sis_priv))
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index ca8160d..72c1630 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -96,10 +96,6 @@
module_param(copybreak, int, 0);
MODULE_PARM_DESC(copybreak, "Receive copy threshold");
-static int disable_msi = 0;
-module_param(disable_msi, int, 0);
-MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
-
static const struct pci_device_id sky2_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) },
{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) },
@@ -3126,61 +3122,6 @@
dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
}
-/* Handle software interrupt used during MSI test */
-static irqreturn_t __devinit sky2_test_intr(int irq, void *dev_id,
- struct pt_regs *regs)
-{
- struct sky2_hw *hw = dev_id;
- u32 status = sky2_read32(hw, B0_Y2_SP_ISRC2);
-
- if (status == 0)
- return IRQ_NONE;
-
- if (status & Y2_IS_IRQ_SW) {
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- hw->msi = 1;
- }
- sky2_write32(hw, B0_Y2_SP_ICR, 2);
-
- sky2_read32(hw, B0_IMSK);
- return IRQ_HANDLED;
-}
-
-/* Test interrupt path by forcing a a software IRQ */
-static int __devinit sky2_test_msi(struct sky2_hw *hw)
-{
- struct pci_dev *pdev = hw->pdev;
- int i, err;
-
- sky2_write32(hw, B0_IMSK, Y2_IS_IRQ_SW);
-
- err = request_irq(pdev->irq, sky2_test_intr, SA_SHIRQ, DRV_NAME, hw);
- if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
- return err;
- }
-
- sky2_write8(hw, B0_CTST, CS_ST_SW_IRQ);
- wmb();
-
- for (i = 0; i < 10; i++) {
- barrier();
- if (hw->msi)
- goto found;
- mdelay(1);
- }
-
- err = -EOPNOTSUPP;
- sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
- found:
- sky2_write32(hw, B0_IMSK, 0);
-
- free_irq(pdev->irq, hw);
-
- return err;
-}
-
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -3302,20 +3243,6 @@
}
}
- if (!disable_msi && pci_enable_msi(pdev) == 0) {
- err = sky2_test_msi(hw);
- if (err == -EOPNOTSUPP) {
- /* MSI test failed, go back to INTx mode */
- printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
- "switching to INTx mode. Please report this failure to "
- "the PCI maintainer and include system chipset information.\n",
- pci_name(pdev));
- pci_disable_msi(pdev);
- }
- else if (err)
- goto err_out_unregister;
- }
-
err = request_irq(pdev->irq, sky2_intr, SA_SHIRQ | SA_SAMPLE_RANDOM,
DRV_NAME, hw);
if (err) {
@@ -3332,8 +3259,6 @@
return 0;
err_out_unregister:
- if (hw->msi)
- pci_disable_msi(pdev);
if (dev1) {
unregister_netdev(dev1);
free_netdev(dev1);
@@ -3376,8 +3301,6 @@
sky2_read8(hw, B0_CTST);
free_irq(pdev->irq, hw);
- if (hw->msi)
- pci_disable_msi(pdev);
pci_free_consistent(pdev, STATUS_LE_BYTES, hw->st_le, hw->st_dma);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 3edb980..dce955c 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1881,7 +1881,6 @@
u32 intr_mask;
int pm_cap;
- int msi;
u8 chip_id;
u8 chip_rev;
u8 copper;
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e7dc653..e8e92c8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9408,6 +9408,15 @@
return 0;
if (venid == PCI_VENDOR_ID_SUN)
return 1;
+
+ /* TG3 chips onboard the SunBlade-2500 don't have the
+ * subsystem-vendor-id set to PCI_VENDOR_ID_SUN but they
+ * are distinguishable from non-Sun variants by being
+ * named "network" by the firmware. Non-Sun cards will
+ * show up as being named "ethernet".
+ */
+ if (!strcmp(pcp->prom_name, "network"))
+ return 1;
}
return 0;
}
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index c2d5907..ed1f837 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -1106,6 +1106,9 @@
for (i = 0; i < vptr->options.numrx; i++) {
struct velocity_rd_info *rd_info = &(vptr->rd_info[i]);
+ struct rx_desc *rd = vptr->rd_ring + i;
+
+ memset(rd, 0, sizeof(*rd));
if (!rd_info->skb)
continue;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 8bc0b52..f8f4503 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -877,7 +877,6 @@
PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
- PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
@@ -891,6 +890,10 @@
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
+ 0x74c5e40d),
+ PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
+ 0x4b801a17),
PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
0x7a954bd9, 0x74be00c6),
PCMCIA_DEVICE_PROD_ID1234(
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 0a424a4..54ad93d 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -352,11 +352,20 @@
kfree(p_dev);
}
+static void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
+{
+ if (!s->pcmcia_state.device_add_pending) {
+ s->pcmcia_state.device_add_pending = 1;
+ schedule_work(&s->device_add);
+ }
+ return;
+}
static int pcmcia_device_probe(struct device * dev)
{
struct pcmcia_device *p_dev;
struct pcmcia_driver *p_drv;
+ struct pcmcia_device_id *did;
struct pcmcia_socket *s;
int ret = 0;
@@ -392,6 +401,19 @@
}
ret = p_drv->probe(p_dev);
+ if (ret)
+ goto put_module;
+
+ /* handle pseudo multifunction devices:
+ * there are at most two pseudo multifunction devices.
+ * if we're matching against the first, schedule a
+ * call which will then check whether there are two
+ * pseudo devices, and if not, add the second one.
+ */
+ did = (struct pcmcia_device_id *) p_dev->dev.driver_data;
+ if ((did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) &&
+ (p_dev->socket->device_count == 1) && (p_dev->device_no == 0))
+ pcmcia_add_pseudo_device(p_dev->socket);
put_module:
if (ret)
@@ -660,15 +682,6 @@
s->pcmcia_state.device_add_pending = 0;
}
-static inline void pcmcia_add_pseudo_device(struct pcmcia_socket *s)
-{
- if (!s->pcmcia_state.device_add_pending) {
- s->pcmcia_state.device_add_pending = 1;
- schedule_work(&s->device_add);
- }
- return;
-}
-
static int pcmcia_requery(struct device *dev, void * _data)
{
struct pcmcia_device *p_dev = to_pcmcia_dev(dev);
@@ -755,15 +768,6 @@
}
if (did->match_flags & PCMCIA_DEV_ID_MATCH_DEVICE_NO) {
- /* handle pseudo multifunction devices:
- * there are at most two pseudo multifunction devices.
- * if we're matching against the first, schedule a
- * call which will then check whether there are two
- * pseudo devices, and if not, add the second one.
- */
- if (dev->device_no == 0)
- pcmcia_add_pseudo_device(dev->socket);
-
if (dev->device_no != did->device_no)
return 0;
}
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index aaa568a..b68eef2 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -303,13 +303,11 @@
down_write(&dev->dev.bus->subsys.rwsem);
dev->card_link = clink;
dev->dev.driver = &drv->link.driver;
- if (drv->link.driver.probe) {
- if (drv->link.driver.probe(&dev->dev)) {
- dev->dev.driver = NULL;
- dev->card_link = NULL;
- up_write(&dev->dev.bus->subsys.rwsem);
- return NULL;
- }
+ if (pnp_bus_type.probe(&dev->dev)) {
+ dev->dev.driver = NULL;
+ dev->card_link = NULL;
+ up_write(&dev->dev.bus->subsys.rwsem);
+ return NULL;
}
device_bind_driver(&dev->dev);
up_write(&dev->dev.bus->subsys.rwsem);
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index cb2ee25..531a1f9 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -1260,16 +1260,15 @@
* Reset the bus
*
*/
-static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+static int aha152x_bus_reset_host(struct Scsi_Host *shpnt)
{
- struct Scsi_Host *shpnt = SCpnt->device->host;
unsigned long flags;
DO_LOCK(flags);
#if defined(AHA152X_DEBUG)
if(HOSTDATA(shpnt)->debug & debug_eh) {
- printk(DEBUG_LEAD "aha152x_bus_reset(%p)", CMDINFO(SCpnt), SCpnt);
+ printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no);
show_queues(shpnt);
}
#endif
@@ -1277,14 +1276,14 @@
free_hard_reset_SCs(shpnt, &ISSUE_SC);
free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
- DPRINTK(debug_eh, DEBUG_LEAD "resetting bus\n", CMDINFO(SCpnt));
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no);
SETPORT(SCSISEQ, SCSIRSTO);
mdelay(256);
SETPORT(SCSISEQ, 0);
mdelay(DELAY);
- DPRINTK(debug_eh, DEBUG_LEAD "bus resetted\n", CMDINFO(SCpnt));
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no);
setup_expected_interrupts(shpnt);
if(HOSTDATA(shpnt)->commands==0)
@@ -1295,6 +1294,14 @@
return SUCCESS;
}
+/*
+ * Reset the bus
+ *
+ */
+static int aha152x_bus_reset(Scsi_Cmnd *SCpnt)
+{
+ return aha152x_bus_reset_host(SCpnt->device->host);
+}
/*
* Restore default values to the AIC-6260 registers and reset the fifos
@@ -1337,23 +1344,28 @@
* Reset the host (bus and controller)
*
*/
-int aha152x_host_reset(Scsi_Cmnd * SCpnt)
+int aha152x_host_reset_host(struct Scsi_Host *shpnt)
{
-#if defined(AHA152X_DEBUG)
- struct Scsi_Host *shpnt = SCpnt->device->host;
-#endif
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no);
- DPRINTK(debug_eh, DEBUG_LEAD "aha152x_host_reset(%p)\n", CMDINFO(SCpnt), SCpnt);
+ aha152x_bus_reset_host(shpnt);
- aha152x_bus_reset(SCpnt);
-
- DPRINTK(debug_eh, DEBUG_LEAD "resetting ports\n", CMDINFO(SCpnt));
- reset_ports(SCpnt->device->host);
+ DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no);
+ reset_ports(shpnt);
return SUCCESS;
}
/*
+ * Reset the host (bus and controller)
+ *
+ */
+static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
+{
+ return aha152x_host_reset_host(SCpnt->device->host);
+}
+
+/*
* Return the "logical geometry"
*
*/
@@ -1431,22 +1443,18 @@
{
int i;
for (i = 0; i<ARRAY_SIZE(aha152x_host); i++) {
- struct Scsi_Host *shpnt = aha152x_host[i];
- if (shpnt && HOSTDATA(shpnt)->service) {
- HOSTDATA(shpnt)->service=0;
- is_complete(shpnt);
- }
+ is_complete(aha152x_host[i]);
}
}
/*
- * Interrupts handler
+ * Interrupt handler
*
*/
-
static irqreturn_t intr(int irqno, void *dev_id, struct pt_regs *regs)
{
struct Scsi_Host *shpnt = lookup_irq(irqno);
+ unsigned long flags;
unsigned char rev, dmacntrl0;
if (!shpnt) {
@@ -1472,23 +1480,23 @@
if ((rev == 0xFF) && (dmacntrl0 == 0xFF))
return IRQ_NONE;
+ if( TESTLO(DMASTAT, INTSTAT) )
+ return IRQ_NONE;
+
/* no more interrupts from the controller, while we're busy.
INTEN is restored by the BH handler */
CLRBITS(DMACNTRL0, INTEN);
-#if 0
- /* check if there is already something to be
- serviced; should not happen */
- if(HOSTDATA(shpnt)->service) {
- printk(KERN_ERR "aha152x%d: lost interrupt (%d)\n", HOSTNO, HOSTDATA(shpnt)->service);
- show_queues(shpnt);
+ DO_LOCK(flags);
+ if( HOSTDATA(shpnt)->service==0 ) {
+ HOSTDATA(shpnt)->service=1;
+
+ /* Poke the BH handler */
+ INIT_WORK(&aha152x_tq, (void *) run, NULL);
+ schedule_work(&aha152x_tq);
}
-#endif
-
- /* Poke the BH handler */
- HOSTDATA(shpnt)->service++;
- INIT_WORK(&aha152x_tq, (void *) run, NULL);
- schedule_work(&aha152x_tq);
+ DO_UNLOCK(flags);
+
return IRQ_HANDLED;
}
@@ -2527,7 +2535,18 @@
unsigned long flags;
int pending;
+ if(!shpnt)
+ return;
+
DO_LOCK(flags);
+
+ if( HOSTDATA(shpnt)->service==0 ) {
+ DO_UNLOCK(flags);
+ return;
+ }
+
+ HOSTDATA(shpnt)->service = 0;
+
if(HOSTDATA(shpnt)->in_intr) {
DO_UNLOCK(flags);
/* aha152x_error never returns.. */
diff --git a/drivers/scsi/aha152x.h b/drivers/scsi/aha152x.h
index d277613..d2add24 100644
--- a/drivers/scsi/aha152x.h
+++ b/drivers/scsi/aha152x.h
@@ -332,6 +332,6 @@
struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
void aha152x_release(struct Scsi_Host *);
-int aha152x_host_reset(Scsi_Cmnd *);
+int aha152x_host_reset_host(struct Scsi_Host *);
#endif /* _AHA152X_H */
diff --git a/drivers/scsi/jazz_esp.c b/drivers/scsi/jazz_esp.c
index 23728d1..fcd304e 100644
--- a/drivers/scsi/jazz_esp.c
+++ b/drivers/scsi/jazz_esp.c
@@ -65,27 +65,6 @@
return 0;
}
-static struct scsi_host_template driver_template = {
- .proc_name = "jazz_esp",
- .proc_info = &esp_proc_info,
- .name = "ESP 100/100a/200",
- .detect = jazz_esp_detect,
- .slave_alloc = esp_slave_alloc,
- .slave_destroy = esp_slave_destroy,
- .release = jazz_esp_release,
- .info = esp_info,
- .queuecommand = esp_queue,
- .eh_abort_handler = esp_abort,
- .eh_bus_reset_handler = esp_reset,
- .can_queue = 7,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = DISABLE_CLUSTERING,
-};
-
-#include "scsi_module.c"
-
/***************************************************************** Detection */
static int jazz_esp_detect(struct scsi_host_template *tpnt)
{
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 5f1d758..4f91b0d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -82,6 +82,10 @@
module_param(atapi_enabled, int, 0444);
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+int libata_fua = 0;
+module_param_named(fua, libata_fua, int, 0444);
+MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 07b1e7c..59503c9 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -1708,6 +1708,8 @@
{
unsigned char model[41], fw[9];
+ if (!libata_fua)
+ return 0;
if (!ata_id_has_fua(id))
return 0;
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index e03ce48..fddaf47 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -41,6 +41,7 @@
/* libata-core.c */
extern int atapi_enabled;
+extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 7de267e..4f39dd0 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -793,6 +793,20 @@
return 0;
}
+static int megasas_slave_configure(struct scsi_device *sdev)
+{
+ /*
+ * Don't export physical disk devices to the disk driver.
+ *
+ * FIXME: Currently we don't export them to the midlayer at all.
+ * That will be fixed once LSI engineers have audited the
+ * firmware for possible issues.
+ */
+ if (sdev->channel < MEGASAS_MAX_PD_CHANNELS && sdev->type == TYPE_DISK)
+ return -ENXIO;
+ return 0;
+}
+
/**
* megasas_wait_for_outstanding - Wait for all outstanding cmds
* @instance: Adapter soft state
@@ -943,6 +957,7 @@
.module = THIS_MODULE,
.name = "LSI Logic SAS based MegaRAID driver",
.proc_name = "megaraid_sas",
+ .slave_configure = megasas_slave_configure,
.queuecommand = megasas_queue_command,
.eh_device_reset_handler = megasas_reset_device,
.eh_bus_reset_handler = megasas_reset_bus_host,
@@ -1071,20 +1086,6 @@
break;
}
- /*
- * Don't export physical disk devices to mid-layer.
- */
- if (!MEGASAS_IS_LOGICAL(cmd->scmd) &&
- (hdr->cmd_status == MFI_STAT_OK) &&
- (cmd->scmd->cmnd[0] == INQUIRY)) {
-
- if (((*(u8 *) cmd->scmd->request_buffer) & 0x1F) ==
- TYPE_DISK) {
- cmd->scmd->result = DID_BAD_TARGET << 16;
- exception = 1;
- }
- }
-
case MFI_CMD_LD_READ:
case MFI_CMD_LD_WRITE:
diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c
index 0c9edb7..5609847 100644
--- a/drivers/scsi/pcmcia/aha152x_stub.c
+++ b/drivers/scsi/pcmcia/aha152x_stub.c
@@ -275,10 +275,8 @@
link->state &= ~DEV_SUSPEND;
if (link->state & DEV_CONFIG) {
- Scsi_Cmnd tmp;
pcmcia_request_configuration(link->handle, &link->conf);
- tmp.device->host = info->host;
- aha152x_host_reset(&tmp);
+ aha152x_host_reset_host(info->host);
}
return 0;
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 17f74d3..9face3c 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -49,11 +49,13 @@
#define DRV_VERSION "0.9"
enum {
+ SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
SIL_FLAG_MOD15WRITE = (1 << 30),
sil_3112 = 0,
sil_3112_m15w = 1,
- sil_3114 = 2,
+ sil_3512 = 2,
+ sil_3114 = 3,
SIL_FIFO_R0 = 0x40,
SIL_FIFO_W0 = 0x41,
@@ -90,7 +92,7 @@
static const struct pci_device_id sil_pci_tbl[] = {
{ 0x1095, 0x3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1095, 0x0240, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
- { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112 },
+ { 0x1095, 0x3512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3512 },
{ 0x1095, 0x3114, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3114 },
{ 0x1002, 0x436e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
{ 0x1002, 0x4379, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sil_3112_m15w },
@@ -185,7 +187,8 @@
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3112_15w - keep it sync'd w/ sil_3112 */
+ },
+ /* sil_3112_15w - keep it sync'd w/ sil_3112 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
@@ -195,11 +198,24 @@
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
.port_ops = &sil_ops,
- }, /* sil_3114 */
+ },
+ /* sil_3512 */
{
.sht = &sil_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x3f, /* udma0-5 */
+ .port_ops = &sil_ops,
+ },
+ /* sil_3114 */
+ {
+ .sht = &sil_sht,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ SIL_FLAG_RERR_ON_DMA_ACT,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x3f, /* udma0-5 */
@@ -216,12 +232,13 @@
unsigned long scr; /* SATA control register block */
unsigned long sien; /* SATA Interrupt Enable register */
unsigned long xfer_mode;/* data transfer mode register */
+ unsigned long sfis_cfg; /* SATA FIS reception config register */
} sil_port[] = {
/* port 0 ... */
- { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4 },
- { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4 },
- { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4 },
- { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4 },
+ { 0x80, 0x8A, 0x00, 0x100, 0x148, 0xb4, 0x14c },
+ { 0xC0, 0xCA, 0x08, 0x180, 0x1c8, 0xf4, 0x1cc },
+ { 0x280, 0x28A, 0x200, 0x300, 0x348, 0x2b4, 0x34c },
+ { 0x2C0, 0x2CA, 0x208, 0x380, 0x3c8, 0x2f4, 0x3cc },
/* ... port 3 */
};
@@ -471,6 +488,23 @@
dev_printk(KERN_WARNING, &pdev->dev,
"cache line size not set. Driver may not function\n");
+ /* Apply R_ERR on DMA activate FIS errata workaround */
+ if (probe_ent->host_flags & SIL_FLAG_RERR_ON_DMA_ACT) {
+ int cnt;
+
+ for (i = 0, cnt = 0; i < probe_ent->n_ports; i++) {
+ tmp = readl(mmio_base + sil_port[i].sfis_cfg);
+ if ((tmp & 0x3) != 0x01)
+ continue;
+ if (!cnt)
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Applying R_ERR on DMA activate "
+ "FIS errata fix\n");
+ writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg);
+ cnt++;
+ }
+ }
+
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 5cc97b7..ff82ccf 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -1308,7 +1308,7 @@
* the request was not marked fast fail. Note that above,
* even if the request is marked fast fail, we still requeue
* for queue congestion conditions (QUEUE_FULL or BUSY) */
- if ((++scmd->retries) < scmd->allowed
+ if ((++scmd->retries) <= scmd->allowed
&& !blk_noretry_request(scmd->request)) {
return NEEDS_RETRY;
} else {
@@ -1433,7 +1433,7 @@
list_del_init(&scmd->eh_entry);
if (scsi_device_online(scmd->device) &&
!blk_noretry_request(scmd->request) &&
- (++scmd->retries < scmd->allowed)) {
+ (++scmd->retries <= scmd->allowed)) {
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush"
" retry cmd: %p\n",
current->comm,
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 4362dcd..701a328 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1498,7 +1498,7 @@
static void scsi_softirq_done(struct request *rq)
{
struct scsi_cmnd *cmd = rq->completion_data;
- unsigned long wait_for = cmd->allowed * cmd->timeout_per_command;
+ unsigned long wait_for = (cmd->allowed + 1) * cmd->timeout_per_command;
int disposition;
INIT_LIST_HEAD(&cmd->eh_entry);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 5acb83c..f9ecc3d 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -752,8 +752,20 @@
transport_configure_device(&sdev->sdev_gendev);
- if (sdev->host->hostt->slave_configure)
- sdev->host->hostt->slave_configure(sdev);
+ if (sdev->host->hostt->slave_configure) {
+ int ret = sdev->host->hostt->slave_configure(sdev);
+ if (ret) {
+ /*
+ * if LLDD reports slave not present, don't clutter
+ * console with alloc failure messages
+ */
+ if (ret != -ENXIO) {
+ sdev_printk(KERN_ERR, sdev,
+ "failed to configure device\n");
+ }
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+ }
/*
* Ok, the device is now all set up, we can
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index f2c9acf..929032e 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -1498,8 +1498,7 @@
}
/* Search the bindings array */
- if (likely((ids->roles & FC_RPORT_ROLE_FCP_TARGET) &&
- (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE))) {
+ if (fc_host_tgtid_bind_type(shost) != FC_TGTID_BIND_NONE) {
/* search for a matching consistent binding */
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 2a54753..5a0a193 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -2162,7 +2162,7 @@
srp->res_used = 1;
SCSI_LOG_TIMEOUT(4, printk("sg_link_reserve: size=%d\n", size));
- rem = size = (size + 1) & (~1); /* round to even for aha1542 */
+ rem = size;
for (k = 0; k < rsv_schp->k_use_sg; ++k, ++sg) {
num = sg->length;
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index f4854c3..2627000 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -919,6 +919,8 @@
tp->usrflags |= (SYM_DISC_ENABLED | SYM_TAGS_ENABLED);
tp->usrtags = SYM_SETUP_MAX_TAG;
+ tp->usr_width = np->maxwide;
+ tp->usr_period = 9;
sym_nvram_setup_target(tp, i, nvram);
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 3087045..4e453fa 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -299,13 +299,10 @@
static void sunsu_stop_rx(struct uart_port *port)
{
struct uart_sunsu_port *up = (struct uart_sunsu_port *) port;
- unsigned long flags;
- spin_lock_irqsave(&up->port.lock, flags);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
- spin_unlock_irqrestore(&up->port.lock, flags);
}
static void sunsu_enable_ms(struct uart_port *port)
diff --git a/drivers/sn/Kconfig b/drivers/sn/Kconfig
index d95265b..a347316 100644
--- a/drivers/sn/Kconfig
+++ b/drivers/sn/Kconfig
@@ -3,10 +3,11 @@
#
menu "SN Devices"
+ depends on SGI_SN
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2) && MMTIMER
+ depends on MMTIMER
default m
---help---
This option enables basic support for the SGI IOC4-based Base IO
@@ -19,7 +20,6 @@
config SGI_IOC3
tristate "SGI IOC3 Base IO support"
- depends on (IA64_GENERIC || IA64_SGI_SN2)
default m
---help---
This option enables basic support for the SGI IOC3-based Base IO
diff --git a/drivers/sn/ioc3.c b/drivers/sn/ioc3.c
index 12357e1..93449a1 100644
--- a/drivers/sn/ioc3.c
+++ b/drivers/sn/ioc3.c
@@ -62,7 +62,7 @@
return presence;
}
-static inline int nic_read_bit(struct ioc3_driver_data *idd)
+static int nic_read_bit(struct ioc3_driver_data *idd)
{
int result;
unsigned long flags;
@@ -77,7 +77,7 @@
return result;
}
-static inline void nic_write_bit(struct ioc3_driver_data *idd, int bit)
+static void nic_write_bit(struct ioc3_driver_data *idd, int bit)
{
if (bit)
writel(mcr_pack(6, 110), &idd->vma->mcr);
@@ -371,8 +371,7 @@
/* Interrupts */
-static inline void
-write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
+static void write_ireg(struct ioc3_driver_data *idd, uint32_t val, int which)
{
unsigned long flags;
@@ -735,14 +734,12 @@
}
/* Add this IOC3 to all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(ioc3_submodules[id] && ioc3_submodules[id]->probe) {
idd->active[id] = 1;
idd->active[id] = !ioc3_submodules[id]->probe
(ioc3_submodules[id], idd);
}
- read_unlock(&ioc3_submodules_lock);
printk(KERN_INFO "IOC3 Master Driver loaded for %s\n", pci_name(pdev));
@@ -767,7 +764,6 @@
idd = pci_get_drvdata(pdev);
/* Remove this IOC3 from all submodules */
- read_lock(&ioc3_submodules_lock);
for(id=0;id<IOC3_MAX_SUBMODULES;id++)
if(idd->active[id]) {
if(ioc3_submodules[id] && ioc3_submodules[id]->remove)
@@ -781,7 +777,6 @@
pci_name(pdev));
idd->active[id] = 0;
}
- read_unlock(&ioc3_submodules_lock);
/* Clear and disable all IRQs */
write_ireg(idd, ~0, IOC3_W_IEC);
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index e02fea5..1a362c5e 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -1062,11 +1062,11 @@
ep->pio_irqs = 0;
ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+ spin_unlock_irqrestore(&ep->dev->lock, flags);
+
/* Reset halt state (does flush) */
lh7a40x_set_halt(_ep, 0);
- spin_unlock_irqrestore(&ep->dev->lock, flags);
-
DEBUG("%s: enabled %s\n", __FUNCTION__, _ep->name);
return 0;
}
@@ -1775,6 +1775,7 @@
break;
qep = &dev->ep[ep_num];
+ spin_unlock(&dev->lock);
if (ctrl.bRequest == USB_REQ_SET_FEATURE) {
DEBUG_SETUP("SET_FEATURE (%d)\n",
ep_num);
@@ -1784,6 +1785,7 @@
ep_num);
lh7a40x_set_halt(&qep->ep, 0);
}
+ spin_lock(&dev->lock);
usb_set_index(0);
/* Reply with a ZLP on next IN token */
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 9689efe..6d6eaad 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -853,11 +853,14 @@
// DEBUG("%s: OID = %08X\n", __FUNCTION__, cpu_to_le32(buf->OID));
if (!rndis_per_dev_params [configNr].dev) return -ENOTSUPP;
- /*
- * we need more memory:
- * oid_supported_list is the largest answer
+ /*
+ * we need more memory:
+ * gen_ndis_query_resp expects enough space for
+ * rndis_query_cmplt_type followed by data.
+ * oid_supported_list is the largest data reply
*/
- r = rndis_add_response (configNr, sizeof (oid_supported_list));
+ r = rndis_add_response (configNr,
+ sizeof (oid_supported_list) + sizeof(rndis_query_cmplt_type));
if (!r)
return -ENOMEM;
resp = (rndis_query_cmplt_type *) r->buf;
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 118288d..9e81c26 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -260,12 +260,13 @@
offset + EHCI_USBLEGCTLSTS,
val | EHCI_USBLEGCTLSTS_SOOE);
#endif
- }
- /* always say Linux will own the hardware
- * by setting EHCI_USBLEGSUP_OS.
- */
- pci_write_config_byte(pdev, offset + 3, 1);
+ /* some systems get upset if this semaphore is
+ * set for any other reason than forcing a BIOS
+ * handoff..
+ */
+ pci_write_config_byte(pdev, offset + 3, 1);
+ }
/* if boot firmware now owns EHCI, spin till
* it hands it over.
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 7724780..07a012f 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1407,6 +1407,7 @@
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
+#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
#define USB_VENDOR_ID_CODEMERCS 0x07c0
#define USB_DEVICE_ID_CODEMERCS_IOW40 0x1500
@@ -1577,6 +1578,7 @@
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_POWERMOUSE, HID_QUIRK_2WHEEL_POWERMOUSE },
{ USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU, HID_QUIRK_2WHEEL_MOUSE_HACK_7 },
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index f2b4ca8..c145e1e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -469,8 +469,14 @@
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_KW_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_YS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_IC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_DB9_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_RS232_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y9_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ca40f16..bdef3b8 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -333,10 +333,18 @@
/*
* microHAM product IDs (http://www.microham.com).
- * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>.
+ * Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
+ * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
+ * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
*/
+#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
+#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
+#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
+#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
+#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
+#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
/*
* Active Robots product ids.
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index bce3d55..11a48d8 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -69,6 +69,8 @@
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID),
+ .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID),
@@ -139,6 +141,7 @@
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) },
{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) },
+ { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) },
diff --git a/drivers/usb/serial/visor.h b/drivers/usb/serial/visor.h
index b84d1cb..765118d 100644
--- a/drivers/usb/serial/visor.h
+++ b/drivers/usb/serial/visor.h
@@ -36,6 +36,9 @@
#define PALM_ZIRE_ID 0x0070
#define PALM_M100_ID 0x0080
+#define GSPDA_VENDOR_ID 0x115e
+#define GSPDA_XPLORE_M68_ID 0xf100
+
#define SONY_VENDOR_ID 0x054C
#define SONY_CLIE_3_5_ID 0x0038
#define SONY_CLIE_4_0_ID 0x0066
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index e71c5ca..31ca920 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -753,6 +753,13 @@
"Flashgate",
US_SC_SCSI, US_PR_BULK, NULL, 0 ),
+/* Reported by David Hamilton <niftimusmaximus@lycos.com> */
+UNUSUAL_DEV( 0x069b, 0x3004, 0x0001, 0x0001,
+ "Thomson Multimedia Inc.",
+ "RCA RD1080 MP3 Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
UNUSUAL_DEV( 0x0781, 0x0001, 0x0200, 0x0200,
"Sandisk",
"ImageMate SDDR-05a",
diff --git a/fs/9p/fid.c b/fs/9p/fid.c
index eda4497..c4d13bf 100644
--- a/fs/9p/fid.c
+++ b/fs/9p/fid.c
@@ -1,7 +1,7 @@
/*
* V9FS FID Management
*
- * Copyright (C) 2005 by Eric Van Hensbergen <ericvh@gmail.com>
+ * Copyright (C) 2005, 2006 by Eric Van Hensbergen <ericvh@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -40,7 +40,7 @@
*
*/
-static int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry)
+int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry)
{
struct list_head *fid_list = (struct list_head *)dentry->d_fsdata;
dprintk(DEBUG_9P, "fid %d (%p) dentry %s (%p)\n", fid->fid, fid,
@@ -57,7 +57,6 @@
}
fid->uid = current->uid;
- fid->pid = current->pid;
list_add(&fid->list, fid_list);
return 0;
}
@@ -68,14 +67,11 @@
*
*/
-struct v9fs_fid *v9fs_fid_create(struct dentry *dentry,
- struct v9fs_session_info *v9ses, int fid, int create)
+struct v9fs_fid *v9fs_fid_create(struct v9fs_session_info *v9ses, int fid)
{
struct v9fs_fid *new;
- dprintk(DEBUG_9P, "fid create dentry %p, fid %d, create %d\n",
- dentry, fid, create);
-
+ dprintk(DEBUG_9P, "fid create fid %d\n", fid);
new = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
if (new == NULL) {
dprintk(DEBUG_ERROR, "Out of Memory\n");
@@ -85,19 +81,13 @@
new->fid = fid;
new->v9ses = v9ses;
new->fidopen = 0;
- new->fidcreate = create;
new->fidclunked = 0;
new->iounit = 0;
new->rdir_pos = 0;
new->rdir_fcall = NULL;
+ INIT_LIST_HEAD(&new->list);
- if (v9fs_fid_insert(new, dentry) == 0)
- return new;
- else {
- dprintk(DEBUG_ERROR, "Problems inserting to dentry\n");
- kfree(new);
- return NULL;
- }
+ return new;
}
/**
@@ -113,140 +103,29 @@
}
/**
- * v9fs_fid_walk_up - walks from the process current directory
- * up to the specified dentry.
- */
-static struct v9fs_fid *v9fs_fid_walk_up(struct dentry *dentry)
-{
- int fidnum, cfidnum, err;
- struct v9fs_fid *cfid;
- struct dentry *cde;
- struct v9fs_session_info *v9ses;
-
- v9ses = v9fs_inode2v9ses(current->fs->pwd->d_inode);
- cfid = v9fs_fid_lookup(current->fs->pwd);
- if (cfid == NULL) {
- dprintk(DEBUG_ERROR, "process cwd doesn't have a fid\n");
- return ERR_PTR(-ENOENT);
- }
-
- cfidnum = cfid->fid;
- cde = current->fs->pwd;
- /* TODO: take advantage of multiwalk */
-
- fidnum = v9fs_get_idpool(&v9ses->fidpool);
- if (fidnum < 0) {
- dprintk(DEBUG_ERROR, "could not get a new fid num\n");
- err = -ENOENT;
- goto clunk_fid;
- }
-
- while (cde != dentry) {
- if (cde == cde->d_parent) {
- dprintk(DEBUG_ERROR, "can't find dentry\n");
- err = -ENOENT;
- goto clunk_fid;
- }
-
- err = v9fs_t_walk(v9ses, cfidnum, fidnum, "..", NULL);
- if (err < 0) {
- dprintk(DEBUG_ERROR, "problem walking to parent\n");
- goto clunk_fid;
- }
-
- cfidnum = fidnum;
- cde = cde->d_parent;
- }
-
- return v9fs_fid_create(dentry, v9ses, fidnum, 0);
-
-clunk_fid:
- v9fs_t_clunk(v9ses, fidnum);
- return ERR_PTR(err);
-}
-
-/**
* v9fs_fid_lookup - retrieve the right fid from a particular dentry
* @dentry: dentry to look for fid in
* @type: intent of lookup (operation or traversal)
*
- * search list of fids associated with a dentry for a fid with a matching
- * thread id or uid. If that fails, look up the dentry's parents to see if you
- * can find a matching fid.
+ * find a fid in the dentry
+ *
+ * TODO: only match fids that have the same uid as current user
*
*/
struct v9fs_fid *v9fs_fid_lookup(struct dentry *dentry)
{
struct list_head *fid_list = (struct list_head *)dentry->d_fsdata;
- struct v9fs_fid *current_fid = NULL;
- struct v9fs_fid *temp = NULL;
struct v9fs_fid *return_fid = NULL;
dprintk(DEBUG_9P, " dentry: %s (%p)\n", dentry->d_iname, dentry);
- if (fid_list) {
- list_for_each_entry_safe(current_fid, temp, fid_list, list) {
- if (!current_fid->fidcreate) {
- return_fid = current_fid;
- break;
- }
- }
-
- if (!return_fid)
- return_fid = current_fid;
- }
-
- /* we are at the root but didn't match */
- if ((!return_fid) && (dentry->d_parent == dentry)) {
- /* TODO: clone attach with new uid */
- return_fid = current_fid;
- }
+ if (fid_list)
+ return_fid = list_entry(fid_list->next, struct v9fs_fid, list);
if (!return_fid) {
- struct dentry *par = current->fs->pwd->d_parent;
- int count = 1;
- while (par != NULL) {
- if (par == dentry)
- break;
- count++;
- if (par == par->d_parent) {
- dprintk(DEBUG_ERROR,
- "got to root without finding dentry\n");
- break;
- }
- par = par->d_parent;
- }
-
-/* XXX - there may be some duplication we can get rid of */
- if (par == dentry) {
- return_fid = v9fs_fid_walk_up(dentry);
- if (IS_ERR(return_fid))
- return_fid = NULL;
- }
+ dprintk(DEBUG_ERROR, "Couldn't find a fid in dentry\n");
}
return return_fid;
}
-
-struct v9fs_fid *v9fs_fid_get_created(struct dentry *dentry)
-{
- struct list_head *fid_list;
- struct v9fs_fid *fid, *ftmp, *ret;
-
- dprintk(DEBUG_9P, " dentry: %s (%p)\n", dentry->d_iname, dentry);
- fid_list = (struct list_head *)dentry->d_fsdata;
- ret = NULL;
- if (fid_list) {
- list_for_each_entry_safe(fid, ftmp, fid_list, list) {
- if (fid->fidcreate && fid->pid == current->pid) {
- list_del(&fid->list);
- ret = fid;
- break;
- }
- }
- }
-
- dprintk(DEBUG_9P, "return %p\n", ret);
- return ret;
-}
diff --git a/fs/9p/fid.h b/fs/9p/fid.h
index 84c673a..1fc2dd0 100644
--- a/fs/9p/fid.h
+++ b/fs/9p/fid.h
@@ -33,7 +33,6 @@
u32 fid;
unsigned char fidopen; /* set when fid is opened */
- unsigned char fidcreate; /* set when fid was just created */
unsigned char fidclunked; /* set when fid has already been clunked */
struct v9fs_qid qid;
@@ -45,7 +44,6 @@
struct v9fs_fcall *rdir_fcall;
/* management stuff */
- pid_t pid; /* thread associated with this fid */
uid_t uid; /* user associated with this fid */
/* private data */
@@ -56,5 +54,5 @@
struct v9fs_fid *v9fs_fid_lookup(struct dentry *dentry);
struct v9fs_fid *v9fs_fid_get_created(struct dentry *);
void v9fs_fid_destroy(struct v9fs_fid *fid);
-struct v9fs_fid *v9fs_fid_create(struct dentry *,
- struct v9fs_session_info *v9ses, int fid, int create);
+struct v9fs_fid *v9fs_fid_create(struct v9fs_session_info *, int fid);
+int v9fs_fid_insert(struct v9fs_fid *fid, struct dentry *dentry);
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index ef33865..6135249 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -397,6 +397,7 @@
}
if (v9ses->afid != ~0) {
+ dprintk(DEBUG_ERROR, "afid not equal to ~0\n");
if (v9fs_t_clunk(v9ses, v9ses->afid))
dprintk(DEBUG_ERROR, "clunk failed\n");
}
diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h
index 69cf290..a759278 100644
--- a/fs/9p/v9fs_vfs.h
+++ b/fs/9p/v9fs_vfs.h
@@ -51,3 +51,4 @@
int v9fs_file_open(struct inode *inode, struct file *file);
void v9fs_inode2stat(struct inode *inode, struct v9fs_stat *stat);
void v9fs_dentry_release(struct dentry *);
+int v9fs_uflags2omode(int uflags);
diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c
index 2dd806d..12c9cc9 100644
--- a/fs/9p/vfs_dentry.c
+++ b/fs/9p/vfs_dentry.c
@@ -43,47 +43,18 @@
#include "fid.h"
/**
- * v9fs_dentry_validate - VFS dcache hook to validate cache
- * @dentry: dentry that is being validated
- * @nd: path data
+ * v9fs_dentry_delete - called when dentry refcount equals 0
+ * @dentry: dentry in question
*
- * dcache really shouldn't be used for 9P2000 as at all due to
- * potential attached semantics to directory traversal (walk).
- *
- * FUTURE: look into how to use dcache to allow multi-stage
- * walks in Plan 9 & potential for better dcache operation which
- * would remain valid for Plan 9 semantics. Older versions
- * had validation via stat for those interested. However, since
- * stat has the same approximate overhead as walk there really
- * is no difference. The only improvement would be from a
- * time-decay cache like NFS has and that undermines the
- * synchronous nature of 9P2000.
+ * By returning 1 here we should remove cacheing of unused
+ * dentry components.
*
*/
-static int v9fs_dentry_validate(struct dentry *dentry, struct nameidata *nd)
+int v9fs_dentry_delete(struct dentry *dentry)
{
- struct dentry *dc = current->fs->pwd;
-
- dprintk(DEBUG_VFS, "dentry: %s (%p)\n", dentry->d_iname, dentry);
- if (v9fs_fid_lookup(dentry)) {
- dprintk(DEBUG_VFS, "VALID\n");
- return 1;
- }
-
- while (dc != NULL) {
- if (dc == dentry) {
- dprintk(DEBUG_VFS, "VALID\n");
- return 1;
- }
- if (dc == dc->d_parent)
- break;
-
- dc = dc->d_parent;
- }
-
- dprintk(DEBUG_VFS, "INVALID\n");
- return 0;
+ dprintk(DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_iname, dentry);
+ return 1;
}
/**
@@ -118,6 +89,6 @@
}
struct dentry_operations v9fs_dentry_operations = {
- .d_revalidate = v9fs_dentry_validate,
+ .d_delete = v9fs_dentry_delete,
.d_release = v9fs_dentry_release,
};
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index c7e14d9..de3a129 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -53,94 +53,70 @@
int v9fs_file_open(struct inode *inode, struct file *file)
{
struct v9fs_session_info *v9ses = v9fs_inode2v9ses(inode);
- struct v9fs_fid *v9fid, *fid;
+ struct v9fs_fid *vfid;
struct v9fs_fcall *fcall = NULL;
- int open_mode = 0;
- unsigned int iounit = 0;
- int newfid = -1;
- long result = -1;
+ int omode;
+ int fid = V9FS_NOFID;
+ int err;
dprintk(DEBUG_VFS, "inode: %p file: %p \n", inode, file);
- v9fid = v9fs_fid_get_created(file->f_dentry);
- if (!v9fid)
- v9fid = v9fs_fid_lookup(file->f_dentry);
-
- if (!v9fid) {
+ vfid = v9fs_fid_lookup(file->f_dentry);
+ if (!vfid) {
dprintk(DEBUG_ERROR, "Couldn't resolve fid from dentry\n");
return -EBADF;
}
- if (!v9fid->fidcreate) {
- fid = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
- if (fid == NULL) {
- dprintk(DEBUG_ERROR, "Out of Memory\n");
- return -ENOMEM;
- }
-
- fid->fidopen = 0;
- fid->fidcreate = 0;
- fid->fidclunked = 0;
- fid->iounit = 0;
- fid->v9ses = v9ses;
-
- newfid = v9fs_get_idpool(&v9ses->fidpool);
- if (newfid < 0) {
+ fid = v9fs_get_idpool(&v9ses->fidpool);
+ if (fid < 0) {
eprintk(KERN_WARNING, "newfid fails!\n");
return -ENOSPC;
}
- result =
- v9fs_t_walk(v9ses, v9fid->fid, newfid, NULL, NULL);
-
- if (result < 0) {
- v9fs_put_idpool(newfid, &v9ses->fidpool);
+ err = v9fs_t_walk(v9ses, vfid->fid, fid, NULL, NULL);
+ if (err < 0) {
dprintk(DEBUG_ERROR, "rewalk didn't work\n");
- return -EBADF;
- }
-
- fid->fid = newfid;
- v9fid = fid;
- /* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
- /* translate open mode appropriately */
- open_mode = file->f_flags & 0x3;
-
- if (file->f_flags & O_EXCL)
- open_mode |= V9FS_OEXCL;
-
- if (v9ses->extended) {
- if (file->f_flags & O_TRUNC)
- open_mode |= V9FS_OTRUNC;
-
- if (file->f_flags & O_APPEND)
- open_mode |= V9FS_OAPPEND;
- }
-
- result = v9fs_t_open(v9ses, newfid, open_mode, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("open failed", fcall);
- kfree(fcall);
- return result;
- }
-
- iounit = fcall->params.ropen.iounit;
- kfree(fcall);
- } else {
- /* create case */
- newfid = v9fid->fid;
- iounit = v9fid->iounit;
- v9fid->fidcreate = 0;
+ goto put_fid;
}
- file->private_data = v9fid;
+ vfid = kmalloc(sizeof(struct v9fs_fid), GFP_KERNEL);
+ if (vfid == NULL) {
+ dprintk(DEBUG_ERROR, "out of memory\n");
+ goto clunk_fid;
+ }
- v9fid->rdir_pos = 0;
- v9fid->rdir_fcall = NULL;
- v9fid->fidopen = 1;
- v9fid->filp = file;
- v9fid->iounit = iounit;
+ /* TODO: do special things for O_EXCL, O_NOFOLLOW, O_SYNC */
+ /* translate open mode appropriately */
+ omode = v9fs_uflags2omode(file->f_flags);
+ err = v9fs_t_open(v9ses, fid, omode, &fcall);
+ if (err < 0) {
+ PRINT_FCALL_ERROR("open failed", fcall);
+ goto destroy_vfid;
+ }
+
+ file->private_data = vfid;
+ vfid->fid = fid;
+ vfid->fidopen = 1;
+ vfid->fidclunked = 0;
+ vfid->iounit = fcall->params.ropen.iounit;
+ vfid->rdir_pos = 0;
+ vfid->rdir_fcall = NULL;
+ vfid->filp = file;
+ kfree(fcall);
return 0;
+
+destroy_vfid:
+ v9fs_fid_destroy(vfid);
+
+clunk_fid:
+ v9fs_t_clunk(v9ses, fid);
+
+put_fid:
+ v9fs_put_idpool(fid, &v9ses->fidpool);
+ kfree(fcall);
+
+ return err;
}
/**
@@ -289,9 +265,7 @@
total += result;
} while (count);
- if(inode->i_mapping->nrpages)
invalidate_inode_pages2(inode->i_mapping);
-
return total;
}
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 63e5b03..dce729d 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -125,6 +125,38 @@
return res;
}
+int v9fs_uflags2omode(int uflags)
+{
+ int ret;
+
+ ret = 0;
+ switch (uflags&3) {
+ default:
+ case O_RDONLY:
+ ret = V9FS_OREAD;
+ break;
+
+ case O_WRONLY:
+ ret = V9FS_OWRITE;
+ break;
+
+ case O_RDWR:
+ ret = V9FS_ORDWR;
+ break;
+ }
+
+ if (uflags & O_EXCL)
+ ret |= V9FS_OEXCL;
+
+ if (uflags & O_TRUNC)
+ ret |= V9FS_OTRUNC;
+
+ if (uflags & O_APPEND)
+ ret |= V9FS_OAPPEND;
+
+ return ret;
+}
+
/**
* v9fs_blank_wstat - helper function to setup a 9P stat structure
* @v9ses: 9P session info (for determining extended mode)
@@ -163,7 +195,7 @@
struct inode *v9fs_get_inode(struct super_block *sb, int mode)
{
- struct inode *inode = NULL;
+ struct inode *inode;
struct v9fs_session_info *v9ses = sb->s_fs_info;
dprintk(DEBUG_VFS, "super block: %p mode: %o\n", sb, mode);
@@ -222,171 +254,135 @@
return inode;
}
-/**
- * v9fs_create - helper function to create files and directories
- * @dir: directory inode file is being created in
- * @file_dentry: dentry file is being created in
- * @perm: permissions file is being created with
- * @open_mode: resulting open mode for file
- *
- */
-
static int
-v9fs_create(struct inode *dir,
- struct dentry *file_dentry,
- unsigned int perm, unsigned int open_mode)
+v9fs_create(struct v9fs_session_info *v9ses, u32 pfid, char *name,
+ u32 perm, u8 mode, u32 *fidp, struct v9fs_qid *qid, u32 *iounit)
{
- struct v9fs_session_info *v9ses = v9fs_inode2v9ses(dir);
- struct super_block *sb = dir->i_sb;
- struct v9fs_fid *dirfid =
- v9fs_fid_lookup(file_dentry->d_parent);
- struct v9fs_fid *fid = NULL;
- struct inode *file_inode = NULL;
- struct v9fs_fcall *fcall = NULL;
- struct v9fs_qid qid;
- int dirfidnum = -1;
- long newfid = -1;
- int result = 0;
- unsigned int iounit = 0;
- int wfidno = -1;
+ u32 fid;
int err;
+ struct v9fs_fcall *fcall;
- perm = unixmode2p9mode(v9ses, perm);
-
- dprintk(DEBUG_VFS, "dir: %p dentry: %p perm: %o mode: %o\n", dir,
- file_dentry, perm, open_mode);
-
- if (!dirfid)
- return -EBADF;
-
- dirfidnum = dirfid->fid;
- if (dirfidnum < 0) {
- dprintk(DEBUG_ERROR, "No fid for the directory #%lu\n",
- dir->i_ino);
- return -EBADF;
- }
-
- if (file_dentry->d_inode) {
- dprintk(DEBUG_ERROR,
- "Odd. There is an inode for dir %lu, name :%s:\n",
- dir->i_ino, file_dentry->d_name.name);
- return -EEXIST;
- }
-
- newfid = v9fs_get_idpool(&v9ses->fidpool);
- if (newfid < 0) {
+ fid = v9fs_get_idpool(&v9ses->fidpool);
+ if (fid < 0) {
eprintk(KERN_WARNING, "no free fids available\n");
- return -ENOSPC;
+ err = -ENOSPC;
+ goto error;
}
- result = v9fs_t_walk(v9ses, dirfidnum, newfid, NULL, &fcall);
- if (result < 0) {
+ err = v9fs_t_walk(v9ses, pfid, fid, NULL, &fcall);
+ if (err < 0) {
PRINT_FCALL_ERROR("clone error", fcall);
- v9fs_put_idpool(newfid, &v9ses->fidpool);
- newfid = -1;
- goto CleanUpFid;
+ goto error;
}
-
kfree(fcall);
- fcall = NULL;
- result = v9fs_t_create(v9ses, newfid, (char *)file_dentry->d_name.name,
- perm, open_mode, &fcall);
- if (result < 0) {
+ err = v9fs_t_create(v9ses, fid, name, perm, mode, &fcall);
+ if (err < 0) {
PRINT_FCALL_ERROR("create fails", fcall);
- goto CleanUpFid;
+ goto error;
}
- iounit = fcall->params.rcreate.iounit;
- qid = fcall->params.rcreate.qid;
+ if (iounit)
+ *iounit = fcall->params.rcreate.iounit;
+
+ if (qid)
+ *qid = fcall->params.rcreate.qid;
+
+ if (fidp)
+ *fidp = fid;
+
kfree(fcall);
- fcall = NULL;
-
- if (!(perm&V9FS_DMDIR)) {
- fid = v9fs_fid_create(file_dentry, v9ses, newfid, 1);
- dprintk(DEBUG_VFS, "fid %p %d\n", fid, fid->fidcreate);
- if (!fid) {
- result = -ENOMEM;
- goto CleanUpFid;
- }
-
- fid->qid = qid;
- fid->iounit = iounit;
- } else {
- err = v9fs_t_clunk(v9ses, newfid);
- newfid = -1;
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk for mkdir failed: %d\n", err);
- }
-
- /* walk to the newly created file and put the fid in the dentry */
- wfidno = v9fs_get_idpool(&v9ses->fidpool);
- if (wfidno < 0) {
- eprintk(KERN_WARNING, "no free fids available\n");
- return -ENOSPC;
- }
-
- result = v9fs_t_walk(v9ses, dirfidnum, wfidno,
- (char *) file_dentry->d_name.name, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("clone error", fcall);
- v9fs_put_idpool(wfidno, &v9ses->fidpool);
- wfidno = -1;
- goto CleanUpFid;
- }
- kfree(fcall);
- fcall = NULL;
-
- if (!v9fs_fid_create(file_dentry, v9ses, wfidno, 0)) {
- v9fs_put_idpool(wfidno, &v9ses->fidpool);
-
- goto CleanUpFid;
- }
-
- if ((perm & V9FS_DMSYMLINK) || (perm & V9FS_DMLINK) ||
- (perm & V9FS_DMNAMEDPIPE) || (perm & V9FS_DMSOCKET) ||
- (perm & V9FS_DMDEVICE))
- return 0;
-
- result = v9fs_t_stat(v9ses, wfidno, &fcall);
- if (result < 0) {
- PRINT_FCALL_ERROR("stat error", fcall);
- goto CleanUpFid;
- }
-
-
- file_inode = v9fs_get_inode(sb,
- p9mode2unixmode(v9ses, fcall->params.rstat.stat.mode));
-
- if ((!file_inode) || IS_ERR(file_inode)) {
- dprintk(DEBUG_ERROR, "create inode failed\n");
- result = -EBADF;
- goto CleanUpFid;
- }
-
- v9fs_stat2inode(&fcall->params.rstat.stat, file_inode, sb);
- kfree(fcall);
- fcall = NULL;
- file_dentry->d_op = &v9fs_dentry_operations;
- d_instantiate(file_dentry, file_inode);
-
return 0;
- CleanUpFid:
+error:
+ if (fid >= 0)
+ v9fs_put_idpool(fid, &v9ses->fidpool);
+
+ kfree(fcall);
+ return err;
+}
+
+static struct v9fs_fid*
+v9fs_clone_walk(struct v9fs_session_info *v9ses, u32 fid, struct dentry *dentry)
+{
+ int err;
+ u32 nfid;
+ struct v9fs_fid *ret;
+ struct v9fs_fcall *fcall;
+
+ nfid = v9fs_get_idpool(&v9ses->fidpool);
+ if (nfid < 0) {
+ eprintk(KERN_WARNING, "no free fids available\n");
+ err = -ENOSPC;
+ goto error;
+ }
+
+ err = v9fs_t_walk(v9ses, fid, nfid, (char *) dentry->d_name.name,
+ &fcall);
+
+ if (err < 0) {
+ PRINT_FCALL_ERROR("walk error", fcall);
+ v9fs_put_idpool(nfid, &v9ses->fidpool);
+ goto error;
+ }
+
kfree(fcall);
fcall = NULL;
+ ret = v9fs_fid_create(v9ses, nfid);
+ if (!ret) {
+ err = -ENOMEM;
+ goto clunk_fid;
+ }
- if (newfid >= 0) {
- err = v9fs_t_clunk(v9ses, newfid);
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
+ err = v9fs_fid_insert(ret, dentry);
+ if (err < 0) {
+ v9fs_fid_destroy(ret);
+ goto clunk_fid;
}
- if (wfidno >= 0) {
- err = v9fs_t_clunk(v9ses, wfidno);
- if (err < 0)
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
+
+ return ret;
+
+clunk_fid:
+ v9fs_t_clunk(v9ses, nfid);
+
+error:
+ kfree(fcall);
+ return ERR_PTR(err);
+}
+
+struct inode *
+v9fs_inode_from_fid(struct v9fs_session_info *v9ses, u32 fid,
+ struct super_block *sb)
+{
+ int err, umode;
+ struct inode *ret;
+ struct v9fs_fcall *fcall;
+
+ ret = NULL;
+ err = v9fs_t_stat(v9ses, fid, &fcall);
+ if (err) {
+ PRINT_FCALL_ERROR("stat error", fcall);
+ goto error;
}
- return result;
+
+ umode = p9mode2unixmode(v9ses, fcall->params.rstat.stat.mode);
+ ret = v9fs_get_inode(sb, umode);
+ if (IS_ERR(ret)) {
+ err = PTR_ERR(ret);
+ ret = NULL;
+ goto error;
+ }
+
+ v9fs_stat2inode(&fcall->params.rstat.stat, ret, sb);
+ kfree(fcall);
+ return ret;
+
+error:
+ kfree(fcall);
+ if (ret)
+ iput(ret);
+
+ return ERR_PTR(err);
}
/**
@@ -440,20 +436,97 @@
return result;
}
+static int
+v9fs_open_created(struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
/**
* v9fs_vfs_create - VFS hook to create files
* @inode: directory inode that is being deleted
* @dentry: dentry that is being deleted
- * @perm: create permissions
+ * @mode: create permissions
* @nd: path information
*
*/
static int
-v9fs_vfs_create(struct inode *inode, struct dentry *dentry, int perm,
+v9fs_vfs_create(struct inode *dir, struct dentry *dentry, int mode,
struct nameidata *nd)
{
- return v9fs_create(inode, dentry, perm, O_RDWR);
+ int err;
+ u32 fid, perm, iounit;
+ int flags;
+ struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid, *ffid;
+ struct inode *inode;
+ struct v9fs_qid qid;
+ struct file *filp;
+
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode);
+
+ if (nd && nd->flags & LOOKUP_OPEN)
+ flags = nd->intent.open.flags - 1;
+ else
+ flags = O_RDWR;
+
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, v9fs_uflags2omode(flags), &fid, &qid, &iounit);
+
+ if (err)
+ goto error;
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
+ }
+
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+
+ if (nd && nd->flags & LOOKUP_OPEN) {
+ ffid = v9fs_fid_create(v9ses, fid);
+ if (!ffid)
+ return -ENOMEM;
+
+ filp = lookup_instantiate_filp(nd, dentry, v9fs_open_created);
+ if (IS_ERR(filp)) {
+ v9fs_fid_destroy(ffid);
+ return PTR_ERR(filp);
+ }
+
+ ffid->rdir_pos = 0;
+ ffid->rdir_fcall = NULL;
+ ffid->fidopen = 1;
+ ffid->iounit = iounit;
+ ffid->filp = filp;
+ filp->private_data = ffid;
+ }
+
+ return 0;
+
+error:
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ if (inode)
+ iput(inode);
+
+ return err;
}
/**
@@ -464,9 +537,57 @@
*
*/
-static int v9fs_vfs_mkdir(struct inode *inode, struct dentry *dentry, int mode)
+static int v9fs_vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
{
- return v9fs_create(inode, dentry, mode | S_IFDIR, O_RDONLY);
+ int err;
+ u32 fid, perm;
+ struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid;
+ struct inode *inode;
+
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode | S_IFDIR);
+
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, V9FS_OREAD, &fid, NULL, NULL);
+
+ if (err) {
+ dprintk(DEBUG_ERROR, "create error %d\n", err);
+ goto error;
+ }
+
+ err = v9fs_t_clunk(v9ses, fid);
+ if (err) {
+ dprintk(DEBUG_ERROR, "clunk error %d\n", err);
+ goto error;
+ }
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
+ }
+
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+ return 0;
+
+error:
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ return err;
}
/**
@@ -516,9 +637,8 @@
return ERR_PTR(-ENOSPC);
}
- result =
- v9fs_t_walk(v9ses, dirfidnum, newfid, (char *)dentry->d_name.name,
- NULL);
+ result = v9fs_t_walk(v9ses, dirfidnum, newfid,
+ (char *)dentry->d_name.name, NULL);
if (result < 0) {
v9fs_put_idpool(newfid, &v9ses->fidpool);
if (result == -ENOENT) {
@@ -551,13 +671,17 @@
inode->i_ino = v9fs_qid2ino(&fcall->params.rstat.stat.qid);
- fid = v9fs_fid_create(dentry, v9ses, newfid, 0);
+ fid = v9fs_fid_create(v9ses, newfid);
if (fid == NULL) {
dprintk(DEBUG_ERROR, "couldn't insert\n");
result = -ENOMEM;
goto FreeFcall;
}
+ result = v9fs_fid_insert(fid, dentry);
+ if (result < 0)
+ goto FreeFcall;
+
fid->qid = fcall->params.rstat.stat.qid;
dentry->d_op = &v9fs_dentry_operations;
@@ -886,8 +1010,8 @@
}
/* copy extension buffer into buffer */
- if (fcall->params.rstat.stat.extension.len+1 < buflen)
- buflen = fcall->params.rstat.stat.extension.len + 1;
+ if (fcall->params.rstat.stat.extension.len < buflen)
+ buflen = fcall->params.rstat.stat.extension.len;
memcpy(buffer, fcall->params.rstat.stat.extension.str, buflen - 1);
buffer[buflen-1] = 0;
@@ -951,7 +1075,7 @@
if (!link)
link = ERR_PTR(-ENOMEM);
else {
- len = v9fs_readlink(dentry, link, PATH_MAX);
+ len = v9fs_readlink(dentry, link, strlen(link));
if (len < 0) {
__putname(link);
@@ -983,53 +1107,75 @@
static int v9fs_vfs_mkspecial(struct inode *dir, struct dentry *dentry,
int mode, const char *extension)
{
- int err, retval;
+ int err;
+ u32 fid, perm;
struct v9fs_session_info *v9ses;
+ struct v9fs_fid *dfid, *vfid;
+ struct inode *inode;
struct v9fs_fcall *fcall;
- struct v9fs_fid *fid;
struct v9fs_wstat wstat;
- v9ses = v9fs_inode2v9ses(dir);
- retval = -EPERM;
fcall = NULL;
+ inode = NULL;
+ vfid = NULL;
+ v9ses = v9fs_inode2v9ses(dir);
+ dfid = v9fs_fid_lookup(dentry->d_parent);
+ perm = unixmode2p9mode(v9ses, mode);
if (!v9ses->extended) {
dprintk(DEBUG_ERROR, "not extended\n");
- goto free_mem;
+ return -EPERM;
}
- /* issue a create */
- retval = v9fs_create(dir, dentry, mode, 0);
- if (retval != 0)
- goto free_mem;
+ err = v9fs_create(v9ses, dfid->fid, (char *) dentry->d_name.name,
+ perm, V9FS_OREAD, &fid, NULL, NULL);
- fid = v9fs_fid_get_created(dentry);
- if (!fid) {
- dprintk(DEBUG_ERROR, "couldn't resolve fid from dentry\n");
- goto free_mem;
+ if (err)
+ goto error;
+
+ err = v9fs_t_clunk(v9ses, fid);
+ if (err)
+ goto error;
+
+ vfid = v9fs_clone_walk(v9ses, dfid->fid, dentry);
+ if (IS_ERR(vfid)) {
+ err = PTR_ERR(vfid);
+ vfid = NULL;
+ goto error;
+ }
+
+ inode = v9fs_inode_from_fid(v9ses, vfid->fid, dir->i_sb);
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ inode = NULL;
+ goto error;
}
/* issue a Twstat */
v9fs_blank_wstat(&wstat);
wstat.muid = v9ses->name;
wstat.extension = (char *) extension;
- retval = v9fs_t_wstat(v9ses, fid->fid, &wstat, &fcall);
- if (retval < 0) {
- PRINT_FCALL_ERROR("wstat error", fcall);
- goto free_mem;
- }
-
- err = v9fs_t_clunk(v9ses, fid->fid);
+ err = v9fs_t_wstat(v9ses, vfid->fid, &wstat, &fcall);
if (err < 0) {
- dprintk(DEBUG_ERROR, "clunk failed: %d\n", err);
- goto free_mem;
+ PRINT_FCALL_ERROR("wstat error", fcall);
+ goto error;
}
- d_drop(dentry); /* FID - will this also clunk? */
-
-free_mem:
kfree(fcall);
- return retval;
+ dentry->d_op = &v9fs_dentry_operations;
+ d_instantiate(dentry, inode);
+ return 0;
+
+error:
+ kfree(fcall);
+ if (vfid)
+ v9fs_fid_destroy(vfid);
+
+ if (inode)
+ iput(inode);
+
+ return err;
+
}
/**
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 2c4fa75..cdf787e 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -146,7 +146,6 @@
inode->i_gid = gid;
root = d_alloc_root(inode);
-
if (!root) {
retval = -ENOMEM;
goto put_back_sb;
@@ -157,16 +156,22 @@
stat_result = v9fs_t_stat(v9ses, newfid, &fcall);
if (stat_result < 0) {
dprintk(DEBUG_ERROR, "stat error\n");
+ kfree(fcall);
v9fs_t_clunk(v9ses, newfid);
- v9fs_put_idpool(newfid, &v9ses->fidpool);
} else {
/* Setup the Root Inode */
- root_fid = v9fs_fid_create(root, v9ses, newfid, 0);
+ root_fid = v9fs_fid_create(v9ses, newfid);
if (root_fid == NULL) {
retval = -ENOMEM;
goto put_back_sb;
}
+ retval = v9fs_fid_insert(root_fid, root);
+ if (retval < 0) {
+ kfree(fcall);
+ goto put_back_sb;
+ }
+
root_fid->qid = fcall->params.rstat.stat.qid;
root->d_inode->i_ino =
v9fs_qid2ino(&fcall->params.rstat.stat.qid);
diff --git a/fs/exec.c b/fs/exec.c
index 0e1c950..0b515ac 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -885,6 +885,12 @@
current->flags &= ~PF_RANDOMIZE;
flush_thread();
+ /* Set the new mm task size. We have to do that late because it may
+ * depend on TIF_32BIT which is only updated in flush_thread() on
+ * some architectures like powerpc
+ */
+ current->mm->task_size = TASK_SIZE;
+
if (bprm->e_uid != current->euid || bprm->e_gid != current->egid ||
file_permission(bprm->file, MAY_READ) ||
(bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP)) {
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 21fd59c..c72a8a9 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -111,6 +111,8 @@
/* Doesn't hurt to "reset" the validity timeout */
fuse_invalidate_entry_cache(entry);
+
+ /* For negative dentries, always do a fresh lookup */
if (!inode)
return 0;
@@ -122,6 +124,9 @@
fuse_lookup_init(req, entry->d_parent->d_inode, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
+ /* Zero nodeid is same as -ENOENT */
+ if (!err && !outarg.nodeid)
+ err = -ENOENT;
if (!err) {
struct fuse_inode *fi = get_fuse_inode(inode);
if (outarg.nodeid != get_node_id(inode)) {
@@ -190,8 +195,9 @@
fuse_lookup_init(req, dir, entry, &outarg);
request_send(fc, req);
err = req->out.h.error;
- if (!err && ((outarg.nodeid && invalid_nodeid(outarg.nodeid)) ||
- !valid_mode(outarg.attr.mode)))
+ /* Zero nodeid is same as -ENOENT, but with valid timeout */
+ if (!err && outarg.nodeid &&
+ (invalid_nodeid(outarg.nodeid) || !valid_mode(outarg.attr.mode)))
err = -EIO;
if (!err && outarg.nodeid) {
inode = fuse_iget(dir->i_sb, outarg.nodeid, outarg.generation,
diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c
index fd741ce..636593b 100644
--- a/fs/ocfs2/cluster/masklog.c
+++ b/fs/ocfs2/cluster/masklog.c
@@ -74,6 +74,7 @@
#define define_mask(_name) { \
.attr = { \
.name = #_name, \
+ .owner = THIS_MODULE, \
.mode = S_IRUGO | S_IWUSR, \
}, \
.mask = ML_##_name, \
diff --git a/fs/ocfs2/cluster/masklog.h b/fs/ocfs2/cluster/masklog.h
index e8c56a3..2cadc30 100644
--- a/fs/ocfs2/cluster/masklog.h
+++ b/fs/ocfs2/cluster/masklog.h
@@ -256,7 +256,7 @@
} \
} while (0)
-#if (BITS_PER_LONG == 32) || defined(CONFIG_X86_64)
+#if (BITS_PER_LONG == 32) || defined(CONFIG_X86_64) || (defined(CONFIG_UML_X86) && defined(CONFIG_64BIT))
#define MLFi64 "lld"
#define MLFu64 "llu"
#define MLFx64 "llx"
diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c
index cf7828f..e1fceb8 100644
--- a/fs/ocfs2/cluster/nodemanager.c
+++ b/fs/ocfs2/cluster/nodemanager.c
@@ -756,7 +756,7 @@
if (!ocfs2_table_header) {
printk(KERN_ERR "nodemanager: unable to register sysctl\n");
ret = -ENOMEM; /* or something. */
- goto out;
+ goto out_o2net;
}
ret = o2net_register_hb_callbacks();
@@ -780,6 +780,8 @@
o2net_unregister_hb_callbacks();
out_sysctl:
unregister_sysctl_table(ocfs2_table_header);
+out_o2net:
+ o2net_exit();
out:
return ret;
}
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index d22d4cf..0f60cc0 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -1318,7 +1318,7 @@
{
struct o2net_node *nn = arg;
struct o2net_sock_container *sc = NULL;
- struct o2nm_node *node = NULL;
+ struct o2nm_node *node = NULL, *mynode = NULL;
struct socket *sock = NULL;
struct sockaddr_in myaddr = {0, }, remoteaddr = {0, };
int ret = 0;
@@ -1334,6 +1334,12 @@
goto out;
}
+ mynode = o2nm_get_node_by_num(o2nm_this_node());
+ if (mynode == NULL) {
+ ret = 0;
+ goto out;
+ }
+
spin_lock(&nn->nn_lock);
/* see if we already have one pending or have given up */
if (nn->nn_sc || nn->nn_persistent_error)
@@ -1361,12 +1367,14 @@
sock->sk->sk_allocation = GFP_ATOMIC;
myaddr.sin_family = AF_INET;
+ myaddr.sin_addr.s_addr = (__force u32)mynode->nd_ipv4_address;
myaddr.sin_port = (__force u16)htons(0); /* any port */
ret = sock->ops->bind(sock, (struct sockaddr *)&myaddr,
sizeof(myaddr));
if (ret) {
- mlog(0, "bind failed: %d\n", ret);
+ mlog(ML_ERROR, "bind failed with %d at address %u.%u.%u.%u\n",
+ ret, NIPQUAD(mynode->nd_ipv4_address));
goto out;
}
@@ -1407,6 +1415,8 @@
sc_put(sc);
if (node)
o2nm_node_put(node);
+ if (mynode)
+ o2nm_node_put(mynode);
return;
}
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index a6f4585..616ff2b 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -85,13 +85,10 @@
O2NET_DRIVER_READY,
};
-int o2net_init_tcp_sock(struct inode *inode);
int o2net_send_message(u32 msg_type, u32 key, void *data, u32 len,
u8 target_node, int *status);
int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *vec,
size_t veclen, u8 target_node, int *status);
-int o2net_broadcast_message(u32 msg_type, u32 key, void *data, u32 len,
- struct inode *group);
int o2net_register_handler(u32 msg_type, u32 key, u32 max_len,
o2net_msg_handler_func *func, void *data,
@@ -107,7 +104,5 @@
int o2net_init(void);
void o2net_exit(void);
-int o2net_proc_init(struct proc_dir_entry *parent);
-void o2net_proc_exit(struct proc_dir_entry *parent);
#endif /* O2CLUSTER_TCP_H */
diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h
index 23ceaa7..9c77258 100644
--- a/fs/ocfs2/dlm/dlmcommon.h
+++ b/fs/ocfs2/dlm/dlmcommon.h
@@ -37,9 +37,7 @@
#define DLM_THREAD_SHUFFLE_INTERVAL 5 // flush everything every 5 passes
#define DLM_THREAD_MS 200 // flush at least every 200 ms
-#define DLM_HASH_BITS 7
-#define DLM_HASH_SIZE (1 << DLM_HASH_BITS)
-#define DLM_HASH_MASK (DLM_HASH_SIZE - 1)
+#define DLM_HASH_BUCKETS (PAGE_SIZE / sizeof(struct hlist_head))
enum dlm_ast_type {
DLM_AST = 0,
@@ -87,7 +85,7 @@
struct dlm_ctxt
{
struct list_head list;
- struct list_head *resources;
+ struct hlist_head *lockres_hash;
struct list_head dirty_list;
struct list_head purge_list;
struct list_head pending_asts;
@@ -217,7 +215,7 @@
{
/* WARNING: Please see the comment in dlm_init_lockres before
* adding fields here. */
- struct list_head list;
+ struct hlist_node hash_node;
struct kref refs;
/* please keep these next 3 in this order
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index f339fe2..54f61b7 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -117,8 +117,8 @@
void dlm_dump_lock_resources(struct dlm_ctxt *dlm)
{
struct dlm_lock_resource *res;
- struct list_head *iter;
- struct list_head *bucket;
+ struct hlist_node *iter;
+ struct hlist_head *bucket;
int i;
mlog(ML_NOTICE, "struct dlm_ctxt: %s, node=%u, key=%u\n",
@@ -129,12 +129,10 @@
}
spin_lock(&dlm->spinlock);
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry(iter, struct dlm_lock_resource, list);
+ for (i=0; i<DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, iter, bucket, hash_node)
dlm_print_one_lock_resource(res);
- }
}
spin_unlock(&dlm->spinlock);
}
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 6ee3083..8f3a9e3 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -77,26 +77,26 @@
void __dlm_unhash_lockres(struct dlm_lock_resource *lockres)
{
- list_del_init(&lockres->list);
+ hlist_del_init(&lockres->hash_node);
dlm_lockres_put(lockres);
}
void __dlm_insert_lockres(struct dlm_ctxt *dlm,
struct dlm_lock_resource *res)
{
- struct list_head *bucket;
+ struct hlist_head *bucket;
struct qstr *q;
assert_spin_locked(&dlm->spinlock);
q = &res->lockname;
q->hash = full_name_hash(q->name, q->len);
- bucket = &(dlm->resources[q->hash & DLM_HASH_MASK]);
+ bucket = &(dlm->lockres_hash[q->hash % DLM_HASH_BUCKETS]);
/* get a reference for our hashtable */
dlm_lockres_get(res);
- list_add_tail(&res->list, bucket);
+ hlist_add_head(&res->hash_node, bucket);
}
struct dlm_lock_resource * __dlm_lookup_lockres(struct dlm_ctxt *dlm,
@@ -104,9 +104,9 @@
unsigned int len)
{
unsigned int hash;
- struct list_head *iter;
+ struct hlist_node *iter;
struct dlm_lock_resource *tmpres=NULL;
- struct list_head *bucket;
+ struct hlist_head *bucket;
mlog_entry("%.*s\n", len, name);
@@ -114,11 +114,11 @@
hash = full_name_hash(name, len);
- bucket = &(dlm->resources[hash & DLM_HASH_MASK]);
+ bucket = &(dlm->lockres_hash[hash % DLM_HASH_BUCKETS]);
/* check for pre-existing lock */
- list_for_each(iter, bucket) {
- tmpres = list_entry(iter, struct dlm_lock_resource, list);
+ hlist_for_each(iter, bucket) {
+ tmpres = hlist_entry(iter, struct dlm_lock_resource, hash_node);
if (tmpres->lockname.len == len &&
memcmp(tmpres->lockname.name, name, len) == 0) {
dlm_lockres_get(tmpres);
@@ -193,8 +193,8 @@
static void dlm_free_ctxt_mem(struct dlm_ctxt *dlm)
{
- if (dlm->resources)
- free_page((unsigned long) dlm->resources);
+ if (dlm->lockres_hash)
+ free_page((unsigned long) dlm->lockres_hash);
if (dlm->name)
kfree(dlm->name);
@@ -303,10 +303,10 @@
mlog(0, "Migrating locks from domain %s\n", dlm->name);
restart:
spin_lock(&dlm->spinlock);
- for (i=0; i<DLM_HASH_SIZE; i++) {
- while (!list_empty(&dlm->resources[i])) {
- res = list_entry(dlm->resources[i].next,
- struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ while (!hlist_empty(&dlm->lockres_hash[i])) {
+ res = hlist_entry(dlm->lockres_hash[i].first,
+ struct dlm_lock_resource, hash_node);
/* need reference when manually grabbing lockres */
dlm_lockres_get(res);
/* this should unhash the lockres
@@ -1191,18 +1191,17 @@
goto leave;
}
- dlm->resources = (struct list_head *) __get_free_page(GFP_KERNEL);
- if (!dlm->resources) {
+ dlm->lockres_hash = (struct hlist_head *) __get_free_page(GFP_KERNEL);
+ if (!dlm->lockres_hash) {
mlog_errno(-ENOMEM);
kfree(dlm->name);
kfree(dlm);
dlm = NULL;
goto leave;
}
- memset(dlm->resources, 0, PAGE_SIZE);
- for (i=0; i<DLM_HASH_SIZE; i++)
- INIT_LIST_HEAD(&dlm->resources[i]);
+ for (i=0; i<DLM_HASH_BUCKETS; i++)
+ INIT_HLIST_HEAD(&dlm->lockres_hash[i]);
strcpy(dlm->name, domain);
dlm->key = key;
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index 2e2e95e..847dd3c 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -564,7 +564,7 @@
/* By the time we're ready to blow this guy away, we shouldn't
* be on any lists. */
- BUG_ON(!list_empty(&res->list));
+ BUG_ON(!hlist_unhashed(&res->hash_node));
BUG_ON(!list_empty(&res->granted));
BUG_ON(!list_empty(&res->converting));
BUG_ON(!list_empty(&res->blocked));
@@ -605,7 +605,7 @@
init_waitqueue_head(&res->wq);
spin_lock_init(&res->spinlock);
- INIT_LIST_HEAD(&res->list);
+ INIT_HLIST_NODE(&res->hash_node);
INIT_LIST_HEAD(&res->granted);
INIT_LIST_HEAD(&res->converting);
INIT_LIST_HEAD(&res->blocked);
diff --git a/fs/ocfs2/dlm/dlmrecovery.c b/fs/ocfs2/dlm/dlmrecovery.c
index ed76bda..1e23200 100644
--- a/fs/ocfs2/dlm/dlmrecovery.c
+++ b/fs/ocfs2/dlm/dlmrecovery.c
@@ -1693,7 +1693,10 @@
u8 dead_node, u8 new_master)
{
int i;
- struct list_head *iter, *iter2, *bucket;
+ struct list_head *iter, *iter2;
+ struct hlist_node *hash_iter;
+ struct hlist_head *bucket;
+
struct dlm_lock_resource *res;
mlog_entry_void();
@@ -1717,10 +1720,9 @@
* for now we need to run the whole hash, clear
* the RECOVERING state and set the owner
* if necessary */
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry (iter, struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, hash_iter, bucket, hash_node) {
if (res->state & DLM_LOCK_RES_RECOVERING) {
if (res->owner == dead_node) {
mlog(0, "(this=%u) res %.*s owner=%u "
@@ -1852,10 +1854,10 @@
static void dlm_do_local_recovery_cleanup(struct dlm_ctxt *dlm, u8 dead_node)
{
- struct list_head *iter;
+ struct hlist_node *iter;
struct dlm_lock_resource *res;
int i;
- struct list_head *bucket;
+ struct hlist_head *bucket;
struct dlm_lock *lock;
@@ -1876,10 +1878,9 @@
* can be kicked again to see if any ASTs or BASTs
* need to be fired as a result.
*/
- for (i=0; i<DLM_HASH_SIZE; i++) {
- bucket = &(dlm->resources[i]);
- list_for_each(iter, bucket) {
- res = list_entry (iter, struct dlm_lock_resource, list);
+ for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+ bucket = &(dlm->lockres_hash[i]);
+ hlist_for_each_entry(res, iter, bucket, hash_node) {
/* always prune any $RECOVERY entries for dead nodes,
* otherwise hangs can occur during later recovery */
if (dlm_is_recovery_lock(res->lockname.name,
diff --git a/fs/ocfs2/extent_map.c b/fs/ocfs2/extent_map.c
index b6ba292..e6f207e 100644
--- a/fs/ocfs2/extent_map.c
+++ b/fs/ocfs2/extent_map.c
@@ -181,6 +181,12 @@
ret = -EBADR;
if (rec_end > OCFS2_I(inode)->ip_clusters) {
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Extent %d at e_blkno %"MLFu64" of inode %"MLFu64" goes past ip_clusters of %u\n",
+ i,
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno,
+ OCFS2_I(inode)->ip_clusters);
goto out_free;
}
@@ -226,6 +232,12 @@
ret = -EBADR;
if (blkno) {
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Multiple extents for (cpos = %u, clusters = %u) on inode %"MLFu64"; e_blkno %"MLFu64" and rec %d at e_blkno %"MLFu64"\n",
+ cpos, clusters,
+ OCFS2_I(inode)->ip_blkno,
+ blkno, i,
+ le64_to_cpu(rec->e_blkno));
goto out_free;
}
@@ -238,6 +250,10 @@
*/
ret = -EBADR;
if (!blkno) {
+ ocfs2_error(inode->i_sb,
+ "No record found for (cpos = %u, clusters = %u) on inode %"MLFu64"\n",
+ cpos, clusters,
+ OCFS2_I(inode)->ip_blkno);
mlog_errno(ret);
goto out_free;
}
@@ -266,6 +282,20 @@
for (i = 0; i < le16_to_cpu(el->l_next_free_rec); i++) {
rec = &el->l_recs[i];
+
+ if ((le32_to_cpu(rec->e_cpos) + le32_to_cpu(rec->e_clusters)) >
+ OCFS2_I(inode)->ip_clusters) {
+ ret = -EBADR;
+ mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Extent %d at e_blkno %"MLFu64" of inode %"MLFu64" goes past ip_clusters of %u\n",
+ i,
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno,
+ OCFS2_I(inode)->ip_clusters);
+ return ret;
+ }
+
ret = ocfs2_extent_map_insert(inode, rec,
le16_to_cpu(el->l_tree_depth));
if (ret) {
@@ -526,6 +556,10 @@
OCFS2_I(inode)->ip_map.em_clusters) {
ret = -EBADR;
mlog_errno(ret);
+ ocfs2_error(inode->i_sb,
+ "Zero e_clusters on non-tail extent record at e_blkno %"MLFu64" on inode %"MLFu64"\n",
+ le64_to_cpu(rec->e_blkno),
+ OCFS2_I(inode)->ip_blkno);
return ret;
}
@@ -588,12 +622,12 @@
* Existing record in the extent map:
*
* cpos = 10, len = 10
- * |---------|
+ * |---------|
*
* New Record:
*
* cpos = 10, len = 20
- * |------------------|
+ * |------------------|
*
* The passed record is the new on-disk record. The new_clusters value
* is how many clusters were added to the file. If the append is a
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 1715bc9..8a4048b 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -933,9 +933,6 @@
struct file *filp = iocb->ki_filp;
struct inode *inode = filp->f_dentry->d_inode;
loff_t newsize, saved_pos;
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-#endif
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", filp, buf,
(unsigned int)count,
@@ -951,14 +948,6 @@
return -EIO;
}
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- /* ugh, work around some applications which open everything O_DIRECT +
- * O_APPEND and really don't mean to use O_DIRECT. */
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS &&
- (filp->f_flags & O_APPEND) && (filp->f_flags & O_DIRECT))
- filp->f_flags &= ~O_DIRECT;
-#endif
-
mutex_lock(&inode->i_mutex);
/* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
if (filp->f_flags & O_DIRECT) {
@@ -1079,27 +1068,7 @@
/* communicate with ocfs2_dio_end_io */
ocfs2_iocb_set_rw_locked(iocb);
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS &&
- filp->f_flags & O_DIRECT) {
- unsigned int saved_flags = filp->f_flags;
- int sector_size = 1 << osb->s_sectsize_bits;
-
- if ((saved_pos & (sector_size - 1)) ||
- (count & (sector_size - 1)) ||
- ((unsigned long)buf & (sector_size - 1))) {
- filp->f_flags |= O_SYNC;
- filp->f_flags &= ~O_DIRECT;
- }
-
- ret = generic_file_aio_write_nolock(iocb, &local_iov, 1,
- &iocb->ki_pos);
-
- filp->f_flags = saved_flags;
- } else
-#endif
- ret = generic_file_aio_write_nolock(iocb, &local_iov, 1,
- &iocb->ki_pos);
+ ret = generic_file_aio_write_nolock(iocb, &local_iov, 1, &iocb->ki_pos);
/* buffered aio wouldn't have proper lock coverage today */
BUG_ON(ret == -EIOCBQUEUED && !(filp->f_flags & O_DIRECT));
@@ -1140,9 +1109,6 @@
int ret = 0, rw_level = -1, have_alloc_sem = 0;
struct file *filp = iocb->ki_filp;
struct inode *inode = filp->f_dentry->d_inode;
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
-#endif
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", filp, buf,
(unsigned int)count,
@@ -1155,21 +1121,6 @@
goto bail;
}
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- if (osb->s_mount_opt & OCFS2_MOUNT_COMPAT_OCFS) {
- if (filp->f_flags & O_DIRECT) {
- int sector_size = 1 << osb->s_sectsize_bits;
-
- if ((pos & (sector_size - 1)) ||
- (count & (sector_size - 1)) ||
- ((unsigned long)buf & (sector_size - 1)) ||
- (i_size_read(inode) & (sector_size -1))) {
- filp->f_flags &= ~O_DIRECT;
- }
- }
- }
-#endif
-
/*
* buffered reads protect themselves in ->readpage(). O_DIRECT reads
* need locks to protect pending reads from racing with truncate.
diff --git a/fs/ocfs2/heartbeat.c b/fs/ocfs2/heartbeat.c
index 0bbd22f..cbfd45a 100644
--- a/fs/ocfs2/heartbeat.c
+++ b/fs/ocfs2/heartbeat.c
@@ -67,6 +67,7 @@
ocfs2_node_map_init(&osb->mounted_map);
ocfs2_node_map_init(&osb->recovery_map);
ocfs2_node_map_init(&osb->umount_map);
+ ocfs2_node_map_init(&osb->osb_recovering_orphan_dirs);
}
static void ocfs2_do_node_down(int node_num,
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 8122489..315472a 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -41,6 +41,7 @@
#include "dlmglue.h"
#include "extent_map.h"
#include "file.h"
+#include "heartbeat.h"
#include "inode.h"
#include "journal.h"
#include "namei.h"
@@ -544,6 +545,42 @@
return status;
}
+/*
+ * Serialize with orphan dir recovery. If the process doing
+ * recovery on this orphan dir does an iget() with the dir
+ * i_mutex held, we'll deadlock here. Instead we detect this
+ * and exit early - recovery will wipe this inode for us.
+ */
+static int ocfs2_check_orphan_recovery_state(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret = 0;
+
+ spin_lock(&osb->osb_lock);
+ if (ocfs2_node_map_test_bit(osb, &osb->osb_recovering_orphan_dirs, slot)) {
+ mlog(0, "Recovery is happening on orphan dir %d, will skip "
+ "this inode\n", slot);
+ ret = -EDEADLK;
+ goto out;
+ }
+ /* This signals to the orphan recovery process that it should
+ * wait for us to handle the wipe. */
+ osb->osb_orphan_wipes[slot]++;
+out:
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
+static void ocfs2_signal_wipe_completion(struct ocfs2_super *osb,
+ int slot)
+{
+ spin_lock(&osb->osb_lock);
+ osb->osb_orphan_wipes[slot]--;
+ spin_unlock(&osb->osb_lock);
+
+ wake_up(&osb->osb_wipe_event);
+}
+
static int ocfs2_wipe_inode(struct inode *inode,
struct buffer_head *di_bh)
{
@@ -555,6 +592,11 @@
/* We've already voted on this so it should be readonly - no
* spinlock needed. */
orphaned_slot = OCFS2_I(inode)->ip_orphaned_slot;
+
+ status = ocfs2_check_orphan_recovery_state(osb, orphaned_slot);
+ if (status)
+ return status;
+
orphan_dir_inode = ocfs2_get_system_file_inode(osb,
ORPHAN_DIR_SYSTEM_INODE,
orphaned_slot);
@@ -597,6 +639,7 @@
brelse(orphan_dir_bh);
bail:
iput(orphan_dir_inode);
+ ocfs2_signal_wipe_completion(osb, orphaned_slot);
return status;
}
@@ -822,7 +865,8 @@
status = ocfs2_wipe_inode(inode, di_bh);
if (status < 0) {
- mlog_errno(status);
+ if (status != -EDEADLK)
+ mlog_errno(status);
goto bail_unlock_inode;
}
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index d329c9d..4be801f 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1408,21 +1408,17 @@
return status;
}
-static int ocfs2_recover_orphans(struct ocfs2_super *osb,
- int slot)
+static int ocfs2_queue_orphans(struct ocfs2_super *osb,
+ int slot,
+ struct inode **head)
{
- int status = 0;
- int have_disk_lock = 0;
- struct inode *inode = NULL;
- struct inode *iter;
+ int status;
struct inode *orphan_dir_inode = NULL;
+ struct inode *iter;
unsigned long offset, blk, local;
struct buffer_head *bh = NULL;
struct ocfs2_dir_entry *de;
struct super_block *sb = osb->sb;
- struct ocfs2_inode_info *oi;
-
- mlog(0, "Recover inodes from orphan dir in slot %d\n", slot);
orphan_dir_inode = ocfs2_get_system_file_inode(osb,
ORPHAN_DIR_SYSTEM_INODE,
@@ -1430,17 +1426,15 @@
if (!orphan_dir_inode) {
status = -ENOENT;
mlog_errno(status);
- goto out;
- }
+ return status;
+ }
mutex_lock(&orphan_dir_inode->i_mutex);
status = ocfs2_meta_lock(orphan_dir_inode, NULL, NULL, 0);
if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
mlog_errno(status);
goto out;
}
- have_disk_lock = 1;
offset = 0;
iter = NULL;
@@ -1451,11 +1445,10 @@
if (!bh)
status = -EINVAL;
if (status < 0) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
if (bh)
brelse(bh);
mlog_errno(status);
- goto out;
+ goto out_unlock;
}
local = 0;
@@ -1465,11 +1458,10 @@
if (!ocfs2_check_dir_entry(orphan_dir_inode,
de, bh, local)) {
- mutex_unlock(&orphan_dir_inode->i_mutex);
status = -EINVAL;
mlog_errno(status);
brelse(bh);
- goto out;
+ goto out_unlock;
}
local += le16_to_cpu(de->rec_len);
@@ -1504,18 +1496,95 @@
mlog(0, "queue orphan %"MLFu64"\n",
OCFS2_I(iter)->ip_blkno);
- OCFS2_I(iter)->ip_next_orphan = inode;
- inode = iter;
+ /* No locking is required for the next_orphan
+ * queue as there is only ever a single
+ * process doing orphan recovery. */
+ OCFS2_I(iter)->ip_next_orphan = *head;
+ *head = iter;
}
brelse(bh);
}
- mutex_unlock(&orphan_dir_inode->i_mutex);
+out_unlock:
ocfs2_meta_unlock(orphan_dir_inode, 0);
- have_disk_lock = 0;
-
+out:
+ mutex_unlock(&orphan_dir_inode->i_mutex);
iput(orphan_dir_inode);
- orphan_dir_inode = NULL;
+ return status;
+}
+
+static int ocfs2_orphan_recovery_can_continue(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret;
+
+ spin_lock(&osb->osb_lock);
+ ret = !osb->osb_orphan_wipes[slot];
+ spin_unlock(&osb->osb_lock);
+ return ret;
+}
+
+static void ocfs2_mark_recovering_orphan_dir(struct ocfs2_super *osb,
+ int slot)
+{
+ spin_lock(&osb->osb_lock);
+ /* Mark ourselves such that new processes in delete_inode()
+ * know to quit early. */
+ ocfs2_node_map_set_bit(osb, &osb->osb_recovering_orphan_dirs, slot);
+ while (osb->osb_orphan_wipes[slot]) {
+ /* If any processes are already in the middle of an
+ * orphan wipe on this dir, then we need to wait for
+ * them. */
+ spin_unlock(&osb->osb_lock);
+ wait_event_interruptible(osb->osb_wipe_event,
+ ocfs2_orphan_recovery_can_continue(osb, slot));
+ spin_lock(&osb->osb_lock);
+ }
+ spin_unlock(&osb->osb_lock);
+}
+
+static void ocfs2_clear_recovering_orphan_dir(struct ocfs2_super *osb,
+ int slot)
+{
+ ocfs2_node_map_clear_bit(osb, &osb->osb_recovering_orphan_dirs, slot);
+}
+
+/*
+ * Orphan recovery. Each mounted node has it's own orphan dir which we
+ * must run during recovery. Our strategy here is to build a list of
+ * the inodes in the orphan dir and iget/iput them. The VFS does
+ * (most) of the rest of the work.
+ *
+ * Orphan recovery can happen at any time, not just mount so we have a
+ * couple of extra considerations.
+ *
+ * - We grab as many inodes as we can under the orphan dir lock -
+ * doing iget() outside the orphan dir risks getting a reference on
+ * an invalid inode.
+ * - We must be sure not to deadlock with other processes on the
+ * system wanting to run delete_inode(). This can happen when they go
+ * to lock the orphan dir and the orphan recovery process attempts to
+ * iget() inside the orphan dir lock. This can be avoided by
+ * advertising our state to ocfs2_delete_inode().
+ */
+static int ocfs2_recover_orphans(struct ocfs2_super *osb,
+ int slot)
+{
+ int ret = 0;
+ struct inode *inode = NULL;
+ struct inode *iter;
+ struct ocfs2_inode_info *oi;
+
+ mlog(0, "Recover inodes from orphan dir in slot %d\n", slot);
+
+ ocfs2_mark_recovering_orphan_dir(osb, slot);
+ ret = ocfs2_queue_orphans(osb, slot, &inode);
+ ocfs2_clear_recovering_orphan_dir(osb, slot);
+
+ /* Error here should be noted, but we want to continue with as
+ * many queued inodes as we've got. */
+ if (ret)
+ mlog_errno(ret);
while (inode) {
oi = OCFS2_I(inode);
@@ -1541,14 +1610,7 @@
inode = iter;
}
-out:
- if (have_disk_lock)
- ocfs2_meta_unlock(orphan_dir_inode, 0);
-
- if (orphan_dir_inode)
- iput(orphan_dir_inode);
-
- return status;
+ return ret;
}
static int ocfs2_wait_on_mount(struct ocfs2_super *osb)
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index 8d8e477..e89de9b 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -174,9 +174,6 @@
OCFS2_MOUNT_NOINTR = 1 << 2, /* Don't catch signals */
OCFS2_MOUNT_ERRORS_PANIC = 1 << 3, /* Panic on errors */
OCFS2_MOUNT_DATA_WRITEBACK = 1 << 4, /* No data ordering */
-#ifdef OCFS2_ORACORE_WORKAROUNDS
- OCFS2_MOUNT_COMPAT_OCFS = 1 << 30, /* ocfs1 compatibility mode */
-#endif
};
#define OCFS2_OSB_SOFT_RO 0x0001
@@ -290,6 +287,10 @@
struct inode *osb_tl_inode;
struct buffer_head *osb_tl_bh;
struct work_struct osb_truncate_log_wq;
+
+ struct ocfs2_node_map osb_recovering_orphan_dirs;
+ unsigned int *osb_orphan_wipes;
+ wait_queue_head_t osb_wipe_event;
};
#define OCFS2_SB(sb) ((struct ocfs2_super *)(sb)->s_fs_info)
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index dfb8a5b..c5b1ac5 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -138,7 +138,6 @@
/* Journal limits (in bytes) */
#define OCFS2_MIN_JOURNAL_SIZE (4 * 1024 * 1024)
-#define OCFS2_MAX_JOURNAL_SIZE (500 * 1024 * 1024)
struct ocfs2_system_inode_info {
char *si_name;
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 046824b..8dd3aaf 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1325,6 +1325,16 @@
}
mlog(ML_NOTICE, "max_slots for this device: %u\n", osb->max_slots);
+ init_waitqueue_head(&osb->osb_wipe_event);
+ osb->osb_orphan_wipes = kcalloc(osb->max_slots,
+ sizeof(*osb->osb_orphan_wipes),
+ GFP_KERNEL);
+ if (!osb->osb_orphan_wipes) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto bail;
+ }
+
osb->s_feature_compat =
le32_to_cpu(OCFS2_RAW_SB(di)->s_feature_compat);
osb->s_feature_ro_compat =
@@ -1638,6 +1648,7 @@
if (osb->slot_info)
ocfs2_free_slot_info(osb->slot_info);
+ kfree(osb->osb_orphan_wipes);
/* FIXME
* This belongs in journal shutdown, but because we have to
* allocate osb->journal at the start of ocfs2_initalize_osb(),
diff --git a/fs/reiserfs/file.c b/fs/reiserfs/file.c
index f347317..be12879 100644
--- a/fs/reiserfs/file.c
+++ b/fs/reiserfs/file.c
@@ -1464,13 +1464,11 @@
partially overwritten pages, if needed. And lock the pages,
so that nobody else can access these until we are done.
We get number of actual blocks needed as a result. */
- blocks_to_allocate =
- reiserfs_prepare_file_region_for_write(inode, pos,
- num_pages,
- write_bytes,
- prepared_pages);
- if (blocks_to_allocate < 0) {
- res = blocks_to_allocate;
+ res = reiserfs_prepare_file_region_for_write(inode, pos,
+ num_pages,
+ write_bytes,
+ prepared_pages);
+ if (res < 0) {
reiserfs_release_claimed_blocks(inode->i_sb,
num_pages <<
(PAGE_CACHE_SHIFT -
@@ -1478,6 +1476,8 @@
break;
}
+ blocks_to_allocate = res;
+
/* First we correct our estimate of how many blocks we need */
reiserfs_release_claimed_blocks(inode->i_sb,
(num_pages <<
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index b33d67b..d60f623 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -627,11 +627,6 @@
reiserfs_write_lock(inode->i_sb);
version = get_inode_item_key_version(inode);
- if (block < 0) {
- reiserfs_write_unlock(inode->i_sb);
- return -EIO;
- }
-
if (!file_capable(inode, block)) {
reiserfs_write_unlock(inode->i_sb);
return -EFBIG;
@@ -934,12 +929,13 @@
//pos_in_item * inode->i_sb->s_blocksize,
TYPE_INDIRECT, 3); // key type is unimportant
+ RFALSE(cpu_key_k_offset(&tmp_key) > cpu_key_k_offset(&key),
+ "green-805: invalid offset");
blocks_needed =
1 +
((cpu_key_k_offset(&key) -
cpu_key_k_offset(&tmp_key)) >> inode->i_sb->
s_blocksize_bits);
- RFALSE(blocks_needed < 0, "green-805: invalid offset");
if (blocks_needed == 1) {
un = &unf_single;
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index b7a1795..5a9d272 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -2319,8 +2319,7 @@
return 1;
}
jh = (struct reiserfs_journal_header *)(journal->j_header_bh->b_data);
- if (le32_to_cpu(jh->j_first_unflushed_offset) >= 0 &&
- le32_to_cpu(jh->j_first_unflushed_offset) <
+ if (le32_to_cpu(jh->j_first_unflushed_offset) <
SB_ONDISK_JOURNAL_SIZE(p_s_sb)
&& le32_to_cpu(jh->j_last_flush_trans_id) > 0) {
oldest_start =
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 8f2beec..74d8be8 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -540,7 +540,7 @@
/* First sum forwards in this page */
do {
- if (mapped != buffer_mapped(bh))
+ if (!buffer_uptodate(bh) || (mapped != buffer_mapped(bh)))
return total;
total += bh->b_size;
} while ((bh = bh->b_this_page) != head);
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index 53a00fb2..7c0e39d 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -68,6 +68,9 @@
kmem_zone_t *qm_dqtrxzone;
STATIC kmem_shaker_t xfs_qm_shaker;
+STATIC cred_t xfs_zerocr;
+STATIC xfs_inode_t xfs_zeroino;
+
STATIC void xfs_qm_list_init(xfs_dqlist_t *, char *, int);
STATIC void xfs_qm_list_destroy(xfs_dqlist_t *);
@@ -1393,8 +1396,6 @@
xfs_trans_t *tp;
int error;
unsigned long s;
- cred_t zerocr;
- xfs_inode_t zeroino;
int committed;
tp = xfs_trans_alloc(mp, XFS_TRANS_QM_QINOCREATE);
@@ -1406,11 +1407,9 @@
xfs_trans_cancel(tp, 0);
return error;
}
- memset(&zerocr, 0, sizeof(zerocr));
- memset(&zeroino, 0, sizeof(zeroino));
- if ((error = xfs_dir_ialloc(&tp, &zeroino, S_IFREG, 1, 0,
- &zerocr, 0, 1, ip, &committed))) {
+ if ((error = xfs_dir_ialloc(&tp, &xfs_zeroino, S_IFREG, 1, 0,
+ &xfs_zerocr, 0, 1, ip, &committed))) {
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES |
XFS_TRANS_ABORT);
return error;
diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c
index 06fc061..5b41394 100644
--- a/fs/xfs/xfs_rtalloc.c
+++ b/fs/xfs/xfs_rtalloc.c
@@ -130,7 +130,8 @@
/*
* Lock the inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
XFS_BMAP_INIT(&flist, &firstblock);
/*
@@ -170,8 +171,8 @@
/*
* Lock the bitmap inode.
*/
- if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL,
- &ip)))
+ if ((error = xfs_trans_iget(mp, tp, ino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
/*
* Get a buffer for the block.
@@ -2023,8 +2024,8 @@
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- if ((error = xfs_trans_iget(mp, tp, 0, mp->m_sb.sb_rbmino,
- XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rbmip);
/*
@@ -2037,8 +2038,8 @@
/*
* Get the summary inode into the transaction.
*/
- if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino,
- 0, XFS_ILOCK_EXCL, &ip)))
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rsumino, 0,
+ XFS_ILOCK_EXCL, &ip)))
goto error_exit;
ASSERT(ip == mp->m_rsumip);
/*
@@ -2158,10 +2159,9 @@
/*
* Lock out other callers by grabbing the bitmap inode lock.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
sumbp = NULL;
/*
* Allocate by size, or near another block, or exactly at some block.
@@ -2221,10 +2221,9 @@
/*
* Synchronize by locking the bitmap inode.
*/
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error) {
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
- }
#if defined(__KERNEL__) && defined(DEBUG)
/*
* Check to see that this whole range is currently allocated.
@@ -2365,8 +2364,8 @@
__uint64_t seq; /* sequence number of file creation */
__uint64_t *seqp; /* pointer to seqno in inode */
- error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0, XFS_ILOCK_EXCL, &ip);
- if (error)
+ if ((error = xfs_trans_iget(mp, tp, mp->m_sb.sb_rbmino, 0,
+ XFS_ILOCK_EXCL, &ip)))
return error;
ASSERT(ip == mp->m_rbmip);
seqp = (__uint64_t *)&ip->i_d.di_atime;
diff --git a/include/asm-ia64/sn/arch.h b/include/asm-ia64/sn/arch.h
index 91c31be..16adc93 100644
--- a/include/asm-ia64/sn/arch.h
+++ b/include/asm-ia64/sn/arch.h
@@ -31,7 +31,8 @@
* to ACPI3.0, this limit will be removed. The notion of "compact nodes"
* should be deleted and TIOs should be included in MAX_NUMNODES.
*/
-#define MAX_COMPACT_NODES 512
+#define MAX_TIO_NODES MAX_NUMNODES
+#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES)
/*
* Maximum number of nodes in all partitions and in all coherency domains.
diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h
index 654b97d..2c8b853 100644
--- a/include/asm-mips/atomic.h
+++ b/include/asm-mips/atomic.h
@@ -250,7 +250,10 @@
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
@@ -266,7 +269,10 @@
" subu %0, %1, %3 \n"
" bltz %0, 1f \n"
" sc %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " subu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
@@ -598,7 +604,10 @@
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqzl %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
@@ -614,7 +623,10 @@
" dsubu %0, %1, %3 \n"
" bltz %0, 1f \n"
" scd %0, %2 \n"
+ " .set noreorder \n"
" beqz %0, 1b \n"
+ " dsubu %0, %1, %3 \n"
+ " .set reorder \n"
" sync \n"
"1: \n"
" .set mips0 \n"
diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h
index 5a4c8a5..8c011aa 100644
--- a/include/asm-mips/io.h
+++ b/include/asm-mips/io.h
@@ -283,6 +283,24 @@
__ioremap_mode((offset), (size), _CACHE_UNCACHED)
/*
+ * ioremap_cachable - map bus memory into CPU space
+ * @offset: bus address of the memory
+ * @size: size of the resource to map
+ *
+ * ioremap_nocache performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * This version of ioremap ensures that the memory is marked cachable by
+ * the CPU. Also enables full write-combining. Useful for some
+ * memory-like regions on I/O busses.
+ */
+#define ioremap_cachable(offset, size) \
+ __ioremap_mode((offset), (size), PAGE_CACHABLE_DEFAULT)
+
+/*
* These two are MIPS specific ioremap variant. ioremap_cacheable_cow
* requests a cachable mapping, ioremap_uncached_accelerated requests a
* mapping using the uncached accelerated mode which isn't supported on
diff --git a/include/asm-mips/smp.h b/include/asm-mips/smp.h
index 5618f1e..75c6fe7 100644
--- a/include/asm-mips/smp.h
+++ b/include/asm-mips/smp.h
@@ -58,7 +58,9 @@
return cpus_weight(cpu_callout_map);
}
-/* These are defined by the board-specific code. */
+/*
+ * These are defined by the board-specific code.
+ */
/*
* Cause the function described by call_data to be executed on the passed
@@ -79,7 +81,12 @@
extern void prom_init_secondary(void);
/*
- * Detect available CPUs, populate phys_cpu_present_map before smp_init
+ * Populate cpu_possible_map before smp_init, called from setup_arch.
+ */
+extern void plat_smp_setup(void);
+
+/*
+ * Called after init_IRQ but before __cpu_up.
*/
extern void prom_prepare_cpus(unsigned int max_cpus);
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index e8e5d41..ddae9ba 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -322,7 +322,7 @@
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
@@ -342,7 +342,7 @@
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
@@ -379,7 +379,7 @@
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else if (cpu_has_llsc) {
@@ -397,7 +397,7 @@
#endif
"2: \n"
" .set pop \n"
- : "=&r" (retval), "=m" (*m)
+ : "=&r" (retval), "=R" (*m)
: "R" (*m), "Jr" (old), "Jr" (new)
: "memory");
} else {
diff --git a/include/asm-powerpc/eeh.h b/include/asm-powerpc/eeh.h
index b263fb2..eb39203 100644
--- a/include/asm-powerpc/eeh.h
+++ b/include/asm-powerpc/eeh.h
@@ -27,6 +27,7 @@
#include <linux/string.h>
struct pci_dev;
+struct pci_bus;
struct device_node;
#ifdef CONFIG_EEH
@@ -60,8 +61,9 @@
* to finish the eeh setup for this device.
*/
void eeh_add_device_early(struct device_node *);
+void eeh_add_device_late(struct pci_dev *dev);
void eeh_add_device_tree_early(struct device_node *);
-void eeh_add_device_late(struct pci_dev *);
+void eeh_add_device_tree_late(struct pci_bus *);
/**
* eeh_remove_device - undo EEH setup for the indicated pci device
@@ -116,12 +118,12 @@
static inline void eeh_add_device_early(struct device_node *dn) { }
-static inline void eeh_add_device_late(struct pci_dev *dev) { }
-
static inline void eeh_remove_device(struct pci_dev *dev) { }
static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+
static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_POSSIBLE_ERROR(val, type) (0)
#define EEH_IO_ERROR_VALUE(size) (-1UL)
diff --git a/include/asm-sparc64/futex.h b/include/asm-sparc64/futex.h
index 6a332a9..0caf601 100644
--- a/include/asm-sparc64/futex.h
+++ b/include/asm-sparc64/futex.h
@@ -1,6 +1,86 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
-#include <asm-generic/futex.h>
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
-#endif
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ "\n1: lduwa [%3] %%asi, %2\n" \
+ " " insn "\n" \
+ "2: casa [%3] %%asi, %2, %1\n" \
+ " cmp %2, %1\n" \
+ " bne,pn %%icc, 1b\n" \
+ " mov 0, %0\n" \
+ "3:\n" \
+ " .section .fixup,#alloc,#execinstr\n" \
+ " .align 4\n" \
+ "4: ba 3b\n" \
+ " mov %5, %0\n" \
+ " .previous\n" \
+ " .section __ex_table,#alloc\n" \
+ " .align 4\n" \
+ " .word 1b, 4b\n" \
+ " .word 2b, 4b\n" \
+ " .previous\n" \
+ : "=&r" (ret), "=&r" (oldval), "=&r" (tem) \
+ : "r" (uaddr), "r" (oparg), "i" (-EFAULT) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret, tem;
+
+ if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+ return -EFAULT;
+ if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+ return -EINVAL;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ inc_preempt_count();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_cas_op("and\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ dec_preempt_count();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
index 110a2de..473edb2 100644
--- a/include/asm-sparc64/smp.h
+++ b/include/asm-sparc64/smp.h
@@ -66,8 +66,14 @@
#define raw_smp_processor_id() (current_thread_info()->cpu)
+extern void smp_setup_cpu_possible_map(void);
+
#endif /* !(__ASSEMBLY__) */
+#else
+
+#define smp_setup_cpu_possible_map() do { } while (0)
+
#endif /* !(CONFIG_SMP) */
#define NO_PROC_ID 0xFF
diff --git a/include/asm-x86_64/acpi.h b/include/asm-x86_64/acpi.h
index e2b9923..aa1c7b2 100644
--- a/include/asm-x86_64/acpi.h
+++ b/include/asm-x86_64/acpi.h
@@ -164,20 +164,6 @@
extern int acpi_skip_timer_override;
-extern int unsync_tsc_on_multicluster;
-
-static inline int acpi_madt_oem_check(char *oem, char *productid)
-{
- /* Copied from i386. Probably has too many entries. */
- if (!strncmp(oem, "IBM ENSW", 8) &&
- (!strncmp(productid, "VIGIL SMP", 9)
- || !strncmp(productid, "EXA", 3)
- || !strncmp(productid, "RUTHLESS SMP", 12))) {
- unsync_tsc_on_multicluster = 1;
- }
- return 0;
-}
-
#endif /*__KERNEL__*/
#endif /*_ASM_ACPI_H*/
diff --git a/include/linux/netfilter_bridge/ebt_log.h b/include/linux/netfilter_bridge/ebt_log.h
index 358fbc8..96e231a 100644
--- a/include/linux/netfilter_bridge/ebt_log.h
+++ b/include/linux/netfilter_bridge/ebt_log.h
@@ -3,6 +3,7 @@
#define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */
#define EBT_LOG_ARP 0x02
+#define EBT_LOG_NFLOG 0x04
#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP)
#define EBT_LOG_PREFIX_SIZE 30
#define EBT_LOG_WATCHER "log"
diff --git a/include/linux/netfilter_ipv4/ipt_LOG.h b/include/linux/netfilter_ipv4/ipt_LOG.h
index 22d1617..892f9a3 100644
--- a/include/linux/netfilter_ipv4/ipt_LOG.h
+++ b/include/linux/netfilter_ipv4/ipt_LOG.h
@@ -6,7 +6,8 @@
#define IPT_LOG_TCPOPT 0x02 /* Log TCP options */
#define IPT_LOG_IPOPT 0x04 /* Log IP options */
#define IPT_LOG_UID 0x08 /* Log UID owning local socket */
-#define IPT_LOG_MASK 0x0f
+#define IPT_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IPT_LOG_MASK 0x1f
struct ipt_log_info {
unsigned char level;
diff --git a/include/linux/netfilter_ipv6/ip6t_LOG.h b/include/linux/netfilter_ipv6/ip6t_LOG.h
index 9008ff5..060c1a1 100644
--- a/include/linux/netfilter_ipv6/ip6t_LOG.h
+++ b/include/linux/netfilter_ipv6/ip6t_LOG.h
@@ -6,7 +6,8 @@
#define IP6T_LOG_TCPOPT 0x02 /* Log TCP options */
#define IP6T_LOG_IPOPT 0x04 /* Log IP options */
#define IP6T_LOG_UID 0x08 /* Log UID owning local socket */
-#define IP6T_LOG_MASK 0x0f
+#define IP6T_LOG_NFLOG 0x10 /* Log using nf_log backend */
+#define IP6T_LOG_MASK 0x1f
struct ip6t_log_info {
unsigned char level;
diff --git a/include/linux/sched.h b/include/linux/sched.h
index b6f51e3..ff2e09c 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -298,8 +298,9 @@
unsigned long addr, unsigned long len,
unsigned long pgoff, unsigned long flags);
void (*unmap_area) (struct mm_struct *mm, unsigned long addr);
- unsigned long mmap_base; /* base of mmap area */
- unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
+ unsigned long mmap_base; /* base of mmap area */
+ unsigned long task_size; /* size of task vm space */
+ unsigned long cached_hole_size; /* if non-zero, the largest hole below free_area_cache */
unsigned long free_area_cache; /* first hole of size cached_hole_size or larger */
pgd_t * pgd;
atomic_t mm_users; /* How many users with user space? */
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 0e92bf7..bac61db 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -147,6 +147,7 @@
KERN_SETUID_DUMPABLE=69, /* int: behaviour of dumps for setuid core */
KERN_SPIN_RETRY=70, /* int: number of spinlock retries */
KERN_ACPI_VIDEO_FLAGS=71, /* int: flags for setting up video after ACPI sleep */
+ KERN_IA64_UNALIGNED=72, /* int: ia64 unaligned userland trap enable */
};
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 004e645..8d362c4 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -233,7 +233,6 @@
int (*init_state)(struct xfrm_state *x);
void (*destructor)(struct xfrm_state *);
int (*input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
- int (*post_input)(struct xfrm_state *, struct xfrm_decap_state *, struct sk_buff *skb);
int (*output)(struct xfrm_state *, struct sk_buff *pskb);
/* Estimate maximal size of result of transformation of a dgram */
u32 (*get_max_size)(struct xfrm_state *, int size);
diff --git a/include/pcmcia/device_id.h b/include/pcmcia/device_id.h
index 346d81e..e04e0b0 100644
--- a/include/pcmcia/device_id.h
+++ b/include/pcmcia/device_id.h
@@ -72,6 +72,15 @@
.prod_id = { (v1), (v2), (v3), (v4) }, \
.prod_id_hash = { (vh1), (vh2), (vh3), (vh4) }, }
+#define PCMCIA_DEVICE_MANF_CARD_PROD_ID1(manf, card, v1, vh1) { \
+ .match_flags = PCMCIA_DEV_ID_MATCH_MANF_ID| \
+ PCMCIA_DEV_ID_MATCH_CARD_ID| \
+ PCMCIA_DEV_ID_MATCH_PROD_ID1, \
+ .manf_id = (manf), \
+ .card_id = (card), \
+ .prod_id = { (v1), NULL, NULL, NULL }, \
+ .prod_id_hash = { (vh1), 0, 0, 0 }, }
+
/* multi-function devices */
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index c05a2b7..de2d910 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -124,6 +124,10 @@
extern int acct_parm[];
#endif
+#ifdef CONFIG_IA64
+extern int no_unaligned_warning;
+#endif
+
static int parse_table(int __user *, int, void __user *, size_t __user *, void __user *, size_t,
ctl_table *, void **);
static int proc_doutsstring(ctl_table *table, int write, struct file *filp,
@@ -663,6 +667,16 @@
.data = &acpi_video_flags,
.maxlen = sizeof (unsigned long),
.mode = 0644,
+ .proc_handler = &proc_doulongvec_minmax,
+ },
+#endif
+#ifdef CONFIG_IA64
+ {
+ .ctl_name = KERN_IA64_UNALIGNED,
+ .procname = "ignore-unaligned-usertrap",
+ .data = &no_unaligned_warning,
+ .maxlen = sizeof (int),
+ .mode = 0644,
.proc_handler = &proc_dointvec,
},
#endif
diff --git a/kernel/timer.c b/kernel/timer.c
index fe3a9a9..fc6646f 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1351,10 +1351,10 @@
return x();
case TIME_SOURCE_MMIO64 :
- return readq((void __iomem *) time_interpolator->addr);
+ return readq_relaxed((void __iomem *)time_interpolator->addr);
case TIME_SOURCE_MMIO32 :
- return readl((void __iomem *) time_interpolator->addr);
+ return readl_relaxed((void __iomem *)time_interpolator->addr);
default: return get_cycles();
}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 67af4ce..1a21008 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -954,7 +954,8 @@
goto out;
}
- err = do_migrate_pages(mm, &old, &new, MPOL_MF_MOVE);
+ err = do_migrate_pages(mm, &old, &new,
+ capable(CAP_SYS_ADMIN) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE);
out:
mmput(mm);
return err;
@@ -1792,7 +1793,8 @@
if (!md)
return 0;
- check_pgd_range(vma, vma->vm_start, vma->vm_end,
+ if (!is_vm_hugetlb_page(vma))
+ check_pgd_range(vma, vma->vm_start, vma->vm_end,
&node_online_map, MPOL_MF_STATS, md);
if (md->pages) {
diff --git a/mm/nommu.c b/mm/nommu.c
index 99d2102..4951f47 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -53,7 +53,6 @@
struct vm_operations_struct generic_file_vm_ops = {
};
-EXPORT_SYMBOL(vmalloc);
EXPORT_SYMBOL(vfree);
EXPORT_SYMBOL(vmalloc_to_page);
EXPORT_SYMBOL(vmalloc_32);
@@ -205,6 +204,13 @@
{
return __vmalloc(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL);
}
+EXPORT_SYMBOL(vmalloc);
+
+void *vmalloc_node(unsigned long size, int node)
+{
+ return vmalloc(size);
+}
+EXPORT_SYMBOL(vmalloc_node);
/*
* vmalloc_32 - allocate virtually continguos memory (32bit addressable)
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 8123fad..78747af 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -302,7 +302,7 @@
{
struct mm_struct *mm = NULL;
task_t *p;
- unsigned long points;
+ unsigned long points = 0;
if (printk_ratelimit()) {
printk("oom-killer: gfp_mask=0x%x, order=%d\n",
@@ -355,6 +355,7 @@
}
out:
+ read_unlock(&tasklist_lock);
cpuset_unlock();
if (mm)
mmput(mm);
@@ -364,5 +365,5 @@
* retry to allocate memory unless "p" is current
*/
if (!test_thread_flag(TIF_MEMDIE))
- schedule_timeout_interruptible(1);
+ schedule_timeout_uninterruptible(1);
}
diff --git a/mm/rmap.c b/mm/rmap.c
index df2c41c..d8ce5ff 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -212,25 +212,33 @@
* through real pte's pointing to valid pages and then releasing
* the page from the swap cache.
*
- * Must hold page lock on page.
+ * Must hold page lock on page and mmap_sem of one vma that contains
+ * the page.
*/
void remove_from_swap(struct page *page)
{
struct anon_vma *anon_vma;
struct vm_area_struct *vma;
+ unsigned long mapping;
- if (!PageAnon(page) || !PageSwapCache(page))
+ if (!PageSwapCache(page))
return;
- anon_vma = page_lock_anon_vma(page);
- if (!anon_vma)
+ mapping = (unsigned long)page->mapping;
+
+ if (!mapping || (mapping & PAGE_MAPPING_ANON) == 0)
return;
+ /*
+ * We hold the mmap_sem lock. So no need to call page_lock_anon_vma.
+ */
+ anon_vma = (struct anon_vma *) (mapping - PAGE_MAPPING_ANON);
+ spin_lock(&anon_vma->lock);
+
list_for_each_entry(vma, &anon_vma->head, anon_vma_node)
remove_vma_swap(vma, page);
spin_unlock(&anon_vma->lock);
-
delete_from_swap_cache(page);
}
EXPORT_SYMBOL(remove_from_swap);
diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c
index 0128fbb..288ff1d 100644
--- a/net/bridge/netfilter/ebt_log.c
+++ b/net/bridge/netfilter/ebt_log.c
@@ -166,7 +166,12 @@
li.u.log.level = info->loglevel;
li.u.log.logflags = info->bitmask;
- nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li, info->prefix);
+ if (info->bitmask & EBT_LOG_NFLOG)
+ nf_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
+ else
+ ebt_log_packet(PF_BRIDGE, hooknr, skb, in, out, &li,
+ info->prefix);
}
static struct ebt_watcher log =
diff --git a/net/core/request_sock.c b/net/core/request_sock.c
index b8203de..98f0fc9 100644
--- a/net/core/request_sock.c
+++ b/net/core/request_sock.c
@@ -52,7 +52,6 @@
get_random_bytes(&lopt->hash_rnd, sizeof(lopt->hash_rnd));
rwlock_init(&queue->syn_wait_lock);
queue->rskq_accept_head = queue->rskq_accept_head = NULL;
- queue->rskq_defer_accept = 0;
lopt->nr_table_entries = nr_table_entries;
write_lock_bh(&queue->syn_wait_lock);
diff --git a/net/ieee80211/ieee80211_rx.c b/net/ieee80211/ieee80211_rx.c
index 960aa78..b410ab8 100644
--- a/net/ieee80211/ieee80211_rx.c
+++ b/net/ieee80211/ieee80211_rx.c
@@ -1301,7 +1301,7 @@
/* dst->last_associate is not overwritten */
}
-static inline int is_beacon(int fc)
+static inline int is_beacon(__le16 fc)
{
return (WLAN_FC_GET_STYPE(le16_to_cpu(fc)) == IEEE80211_STYPE_BEACON);
}
@@ -1348,9 +1348,7 @@
escape_essid(info_element->data,
info_element->len),
MAC_ARG(beacon->header.addr3),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
return;
}
@@ -1400,9 +1398,7 @@
escape_essid(network.ssid,
network.ssid_len),
MAC_ARG(network.bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
#endif
memcpy(target, &network, sizeof(*target));
@@ -1412,16 +1408,14 @@
escape_essid(target->ssid,
target->ssid_len),
MAC_ARG(target->bssid),
- is_beacon(le16_to_cpu
- (beacon->header.
- frame_ctl)) ?
+ is_beacon(beacon->header.frame_ctl) ?
"BEACON" : "PROBE RESPONSE");
update_network(target, &network);
}
spin_unlock_irqrestore(&ieee->lock, flags);
- if (is_beacon(le16_to_cpu(beacon->header.frame_ctl))) {
+ if (is_beacon(beacon->header.frame_ctl)) {
if (ieee->handle_beacon != NULL)
ieee->handle_beacon(dev, beacon, &network);
} else {
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 73bfcae..09590f3 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -12,13 +12,6 @@
#include <net/protocol.h>
#include <net/udp.h>
-/* decapsulation data for use when post-processing */
-struct esp_decap_data {
- xfrm_address_t saddr;
- __u16 sport;
- __u8 proto;
-};
-
static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
{
int err;
@@ -150,6 +143,10 @@
int elen = skb->len - sizeof(struct ip_esp_hdr) - esp->conf.ivlen - alen;
int nfrags;
int encap_len = 0;
+ u8 nexthdr[2];
+ struct scatterlist *sg;
+ u8 workbuf[60];
+ int padlen;
if (!pskb_may_pull(skb, sizeof(struct ip_esp_hdr)))
goto out;
@@ -185,124 +182,84 @@
if (esp->conf.ivlen)
crypto_cipher_set_iv(esp->conf.tfm, esph->enc_data, crypto_tfm_alg_ivsize(esp->conf.tfm));
- {
- u8 nexthdr[2];
- struct scatterlist *sg = &esp->sgbuf[0];
- u8 workbuf[60];
- int padlen;
+ sg = &esp->sgbuf[0];
- if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
- sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
- if (!sg)
- goto out;
- }
- skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
- crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
- if (unlikely(sg != &esp->sgbuf[0]))
- kfree(sg);
+ if (unlikely(nfrags > ESP_NUM_FAST_SG)) {
+ sg = kmalloc(sizeof(struct scatterlist)*nfrags, GFP_ATOMIC);
+ if (!sg)
+ goto out;
+ }
+ skb_to_sgvec(skb, sg, sizeof(struct ip_esp_hdr) + esp->conf.ivlen, elen);
+ crypto_cipher_decrypt(esp->conf.tfm, sg, sg, elen);
+ if (unlikely(sg != &esp->sgbuf[0]))
+ kfree(sg);
- if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
- BUG();
+ if (skb_copy_bits(skb, skb->len-alen-2, nexthdr, 2))
+ BUG();
- padlen = nexthdr[0];
- if (padlen+2 >= elen)
+ padlen = nexthdr[0];
+ if (padlen+2 >= elen)
+ goto out;
+
+ /* ... check padding bits here. Silly. :-) */
+
+ if (x->encap) {
+ struct xfrm_encap_tmpl *encap = x->encap;
+ struct udphdr *uh;
+
+ if (encap->encap_type != decap->decap_type)
goto out;
- /* ... check padding bits here. Silly. :-) */
+ uh = (struct udphdr *)(iph + 1);
+ encap_len = (void*)esph - (void*)uh;
- if (x->encap && decap && decap->decap_type) {
- struct esp_decap_data *encap_data;
- struct udphdr *uh = (struct udphdr *) (iph+1);
+ /*
+ * 1) if the NAT-T peer's IP or port changed then
+ * advertize the change to the keying daemon.
+ * This is an inbound SA, so just compare
+ * SRC ports.
+ */
+ if (iph->saddr != x->props.saddr.a4 ||
+ uh->source != encap->encap_sport) {
+ xfrm_address_t ipaddr;
- encap_data = (struct esp_decap_data *) (decap->decap_data);
- encap_data->proto = 0;
-
- switch (decap->decap_type) {
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- encap_data->proto = AF_INET;
- encap_data->saddr.a4 = iph->saddr;
- encap_data->sport = uh->source;
- encap_len = (void*)esph - (void*)uh;
- break;
-
- default:
- goto out;
- }
+ ipaddr.a4 = iph->saddr;
+ km_new_mapping(x, &ipaddr, uh->source);
+
+ /* XXX: perhaps add an extra
+ * policy check here, to see
+ * if we should allow or
+ * reject a packet from a
+ * different source
+ * address/port.
+ */
}
-
- iph->protocol = nexthdr[1];
- pskb_trim(skb, skb->len - alen - padlen - 2);
- memcpy(workbuf, skb->nh.raw, iph->ihl*4);
- skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
- skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
- memcpy(skb->nh.raw, workbuf, iph->ihl*4);
- skb->nh.iph->tot_len = htons(skb->len);
+
+ /*
+ * 2) ignore UDP/TCP checksums in case
+ * of NAT-T in Transport Mode, or
+ * perform other post-processing fixes
+ * as per draft-ietf-ipsec-udp-encaps-06,
+ * section 3.1.2
+ */
+ if (!x->props.mode)
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
}
+ iph->protocol = nexthdr[1];
+ pskb_trim(skb, skb->len - alen - padlen - 2);
+ memcpy(workbuf, skb->nh.raw, iph->ihl*4);
+ skb->h.raw = skb_pull(skb, sizeof(struct ip_esp_hdr) + esp->conf.ivlen);
+ skb->nh.raw += encap_len + sizeof(struct ip_esp_hdr) + esp->conf.ivlen;
+ memcpy(skb->nh.raw, workbuf, iph->ihl*4);
+ skb->nh.iph->tot_len = htons(skb->len);
+
return 0;
out:
return -EINVAL;
}
-static int esp_post_input(struct xfrm_state *x, struct xfrm_decap_state *decap, struct sk_buff *skb)
-{
-
- if (x->encap) {
- struct xfrm_encap_tmpl *encap;
- struct esp_decap_data *decap_data;
-
- encap = x->encap;
- decap_data = (struct esp_decap_data *)(decap->decap_data);
-
- /* first, make sure that the decap type == the encap type */
- if (encap->encap_type != decap->decap_type)
- return -EINVAL;
-
- switch (encap->encap_type) {
- default:
- case UDP_ENCAP_ESPINUDP:
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- /*
- * 1) if the NAT-T peer's IP or port changed then
- * advertize the change to the keying daemon.
- * This is an inbound SA, so just compare
- * SRC ports.
- */
- if (decap_data->proto == AF_INET &&
- (decap_data->saddr.a4 != x->props.saddr.a4 ||
- decap_data->sport != encap->encap_sport)) {
- xfrm_address_t ipaddr;
-
- ipaddr.a4 = decap_data->saddr.a4;
- km_new_mapping(x, &ipaddr, decap_data->sport);
-
- /* XXX: perhaps add an extra
- * policy check here, to see
- * if we should allow or
- * reject a packet from a
- * different source
- * address/port.
- */
- }
-
- /*
- * 2) ignore UDP/TCP checksums in case
- * of NAT-T in Transport Mode, or
- * perform other post-processing fixes
- * as per * draft-ietf-ipsec-udp-encaps-06,
- * section 3.1.2
- */
- if (!x->props.mode)
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- break;
- }
- }
- return 0;
-}
-
static u32 esp4_get_max_size(struct xfrm_state *x, int mtu)
{
struct esp_data *esp = x->data;
@@ -458,7 +415,6 @@
.destructor = esp_destroy,
.get_max_size = esp4_get_max_size,
.input = esp_input,
- .post_input = esp_post_input,
.output = esp_output
};
@@ -470,15 +426,6 @@
static int __init esp4_init(void)
{
- struct xfrm_decap_state decap;
-
- if (sizeof(struct esp_decap_data) >
- sizeof(decap.decap_data)) {
- extern void decap_data_too_small(void);
-
- decap_data_too_small();
- }
-
if (xfrm_register_type(&esp_type, AF_INET) < 0) {
printk(KERN_INFO "ip esp init: can't add xfrm type\n");
return -EAGAIN;
diff --git a/net/ipv4/netfilter/ipt_LOG.c b/net/ipv4/netfilter/ipt_LOG.c
index 6606ddb..cc27545 100644
--- a/net/ipv4/netfilter/ipt_LOG.c
+++ b/net/ipv4/netfilter/ipt_LOG.c
@@ -425,7 +425,12 @@
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IPT_LOG_NFLOG)
+ nf_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ipt_log_packet(PF_INET, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IPT_CONTINUE;
}
diff --git a/net/ipv6/netfilter/ip6t_LOG.c b/net/ipv6/netfilter/ip6t_LOG.c
index 77c7258..6b930ef 100644
--- a/net/ipv6/netfilter/ip6t_LOG.c
+++ b/net/ipv6/netfilter/ip6t_LOG.c
@@ -436,7 +436,12 @@
li.u.log.level = loginfo->level;
li.u.log.logflags = loginfo->logflags;
- nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li, loginfo->prefix);
+ if (loginfo->logflags & IP6T_LOG_NFLOG)
+ nf_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
+ else
+ ip6t_log_packet(PF_INET6, hooknum, *pskb, in, out, &li,
+ loginfo->prefix);
return IP6T_CONTINUE;
}
diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c
index d3a4f30..d9f0d7e 100644
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -6,6 +6,7 @@
#include <linux/skbuff.h>
#include <linux/netfilter.h>
#include <linux/seq_file.h>
+#include <linux/rcupdate.h>
#include <net/protocol.h>
#include "nf_internals.h"
@@ -16,7 +17,7 @@
* for queueing and must reinject all packets it receives, no matter what.
*/
static struct nf_queue_handler *queue_handler[NPROTO];
-static struct nf_queue_rerouter *queue_rerouter;
+static struct nf_queue_rerouter *queue_rerouter[NPROTO];
static DEFINE_RWLOCK(queue_handler_lock);
@@ -64,7 +65,7 @@
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memcpy(&queue_rerouter[pf], rer, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], rer);
write_unlock_bh(&queue_handler_lock);
return 0;
@@ -77,8 +78,9 @@
return -EINVAL;
write_lock_bh(&queue_handler_lock);
- memset(&queue_rerouter[pf], 0, sizeof(queue_rerouter[pf]));
+ rcu_assign_pointer(queue_rerouter[pf], NULL);
write_unlock_bh(&queue_handler_lock);
+ synchronize_rcu();
return 0;
}
EXPORT_SYMBOL_GPL(nf_unregister_queue_rerouter);
@@ -114,16 +116,17 @@
struct net_device *physindev = NULL;
struct net_device *physoutdev = NULL;
#endif
+ struct nf_queue_rerouter *rerouter;
/* QUEUE == DROP if noone is waiting, to be safe. */
read_lock(&queue_handler_lock);
- if (!queue_handler[pf] || !queue_handler[pf]->outfn) {
+ if (!queue_handler[pf]) {
read_unlock(&queue_handler_lock);
kfree_skb(*skb);
return 1;
}
- info = kmalloc(sizeof(*info)+queue_rerouter[pf].rer_size, GFP_ATOMIC);
+ info = kmalloc(sizeof(*info)+queue_rerouter[pf]->rer_size, GFP_ATOMIC);
if (!info) {
if (net_ratelimit())
printk(KERN_ERR "OOM queueing packet %p\n",
@@ -155,15 +158,13 @@
if (physoutdev) dev_hold(physoutdev);
}
#endif
- if (queue_rerouter[pf].save)
- queue_rerouter[pf].save(*skb, info);
+ rerouter = rcu_dereference(queue_rerouter[pf]);
+ if (rerouter)
+ rerouter->save(*skb, info);
status = queue_handler[pf]->outfn(*skb, info, queuenum,
queue_handler[pf]->data);
- if (status >= 0 && queue_rerouter[pf].reroute)
- status = queue_rerouter[pf].reroute(skb, info);
-
read_unlock(&queue_handler_lock);
if (status < 0) {
@@ -189,6 +190,7 @@
{
struct list_head *elem = &info->elem->list;
struct list_head *i;
+ struct nf_queue_rerouter *rerouter;
rcu_read_lock();
@@ -212,7 +214,7 @@
break;
}
- if (elem == &nf_hooks[info->pf][info->hook]) {
+ if (i == &nf_hooks[info->pf][info->hook]) {
/* The module which sent it to userspace is gone. */
NFDEBUG("%s: module disappeared, dropping packet.\n",
__FUNCTION__);
@@ -226,6 +228,12 @@
}
if (verdict == NF_ACCEPT) {
+ rerouter = rcu_dereference(queue_rerouter[info->pf]);
+ if (rerouter && rerouter->reroute(&skb, info) < 0)
+ verdict = NF_DROP;
+ }
+
+ if (verdict == NF_ACCEPT) {
next_hook:
verdict = nf_iterate(&nf_hooks[info->pf][info->hook],
&skb, info->hook,
@@ -322,22 +330,12 @@
{
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *pde;
-#endif
- queue_rerouter = kmalloc(NPROTO * sizeof(struct nf_queue_rerouter),
- GFP_KERNEL);
- if (!queue_rerouter)
- return -ENOMEM;
-#ifdef CONFIG_PROC_FS
pde = create_proc_entry("nf_queue", S_IRUGO, proc_net_netfilter);
- if (!pde) {
- kfree(queue_rerouter);
+ if (!pde)
return -1;
- }
pde->proc_fops = &nfqueue_file_ops;
#endif
- memset(queue_rerouter, 0, NPROTO * sizeof(struct nf_queue_rerouter));
-
return 0;
}
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 8206025..ae62054 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -996,13 +996,6 @@
struct sec_decap_state *xvec = &(skb->sp->x[i]);
if (!xfrm_selector_match(&xvec->xvec->sel, &fl, family))
return 0;
-
- /* If there is a post_input processor, try running it */
- if (xvec->xvec->type->post_input &&
- (xvec->xvec->type->post_input)(xvec->xvec,
- &(xvec->decap),
- skb) != 0)
- return 0;
}
}