| /* #define DEBUG */ |
| |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/gpio.h> |
| #include <linux/spi/spi.h> |
| #include <linux/backlight.h> |
| #include <linux/fb.h> |
| |
| #include <video/omapdss.h> |
| #include <video/omap-panel-n8x0.h> |
| |
| #define BLIZZARD_REV_CODE 0x00 |
| #define BLIZZARD_CONFIG 0x02 |
| #define BLIZZARD_PLL_DIV 0x04 |
| #define BLIZZARD_PLL_LOCK_RANGE 0x06 |
| #define BLIZZARD_PLL_CLOCK_SYNTH_0 0x08 |
| #define BLIZZARD_PLL_CLOCK_SYNTH_1 0x0a |
| #define BLIZZARD_PLL_MODE 0x0c |
| #define BLIZZARD_CLK_SRC 0x0e |
| #define BLIZZARD_MEM_BANK0_ACTIVATE 0x10 |
| #define BLIZZARD_MEM_BANK0_STATUS 0x14 |
| #define BLIZZARD_PANEL_CONFIGURATION 0x28 |
| #define BLIZZARD_HDISP 0x2a |
| #define BLIZZARD_HNDP 0x2c |
| #define BLIZZARD_VDISP0 0x2e |
| #define BLIZZARD_VDISP1 0x30 |
| #define BLIZZARD_VNDP 0x32 |
| #define BLIZZARD_HSW 0x34 |
| #define BLIZZARD_VSW 0x38 |
| #define BLIZZARD_DISPLAY_MODE 0x68 |
| #define BLIZZARD_INPUT_WIN_X_START_0 0x6c |
| #define BLIZZARD_DATA_SOURCE_SELECT 0x8e |
| #define BLIZZARD_DISP_MEM_DATA_PORT 0x90 |
| #define BLIZZARD_DISP_MEM_READ_ADDR0 0x92 |
| #define BLIZZARD_POWER_SAVE 0xE6 |
| #define BLIZZARD_NDISP_CTRL_STATUS 0xE8 |
| |
| /* Data source select */ |
| /* For S1D13745 */ |
| #define BLIZZARD_SRC_WRITE_LCD_BACKGROUND 0x00 |
| #define BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE 0x01 |
| #define BLIZZARD_SRC_WRITE_OVERLAY_ENABLE 0x04 |
| #define BLIZZARD_SRC_DISABLE_OVERLAY 0x05 |
| /* For S1D13744 */ |
| #define BLIZZARD_SRC_WRITE_LCD 0x00 |
| #define BLIZZARD_SRC_BLT_LCD 0x06 |
| |
| #define BLIZZARD_COLOR_RGB565 0x01 |
| #define BLIZZARD_COLOR_YUV420 0x09 |
| |
| #define BLIZZARD_VERSION_S1D13745 0x01 /* Hailstorm */ |
| #define BLIZZARD_VERSION_S1D13744 0x02 /* Blizzard */ |
| |
| #define MIPID_CMD_READ_DISP_ID 0x04 |
| #define MIPID_CMD_READ_RED 0x06 |
| #define MIPID_CMD_READ_GREEN 0x07 |
| #define MIPID_CMD_READ_BLUE 0x08 |
| #define MIPID_CMD_READ_DISP_STATUS 0x09 |
| #define MIPID_CMD_RDDSDR 0x0F |
| #define MIPID_CMD_SLEEP_IN 0x10 |
| #define MIPID_CMD_SLEEP_OUT 0x11 |
| #define MIPID_CMD_DISP_OFF 0x28 |
| #define MIPID_CMD_DISP_ON 0x29 |
| |
| static struct panel_drv_data { |
| struct mutex lock; |
| |
| struct omap_dss_device *dssdev; |
| struct spi_device *spidev; |
| struct backlight_device *bldev; |
| |
| int blizzard_ver; |
| } s_drv_data; |
| |
| |
| static inline |
| struct panel_n8x0_data *get_board_data(const struct omap_dss_device *dssdev) |
| { |
| return dssdev->data; |
| } |
| |
| static inline |
| struct panel_drv_data *get_drv_data(const struct omap_dss_device *dssdev) |
| { |
| return &s_drv_data; |
| } |
| |
| |
| static inline void blizzard_cmd(u8 cmd) |
| { |
| omap_rfbi_write_command(&cmd, 1); |
| } |
| |
| static inline void blizzard_write(u8 cmd, const u8 *buf, int len) |
| { |
| omap_rfbi_write_command(&cmd, 1); |
| omap_rfbi_write_data(buf, len); |
| } |
| |
| static inline void blizzard_read(u8 cmd, u8 *buf, int len) |
| { |
| omap_rfbi_write_command(&cmd, 1); |
| omap_rfbi_read_data(buf, len); |
| } |
| |
| static u8 blizzard_read_reg(u8 cmd) |
| { |
| u8 data; |
| blizzard_read(cmd, &data, 1); |
| return data; |
| } |
| |
| static void blizzard_ctrl_setup_update(struct omap_dss_device *dssdev, |
| int x, int y, int w, int h) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| u8 tmp[18]; |
| int x_end, y_end; |
| |
| x_end = x + w - 1; |
| y_end = y + h - 1; |
| |
| tmp[0] = x; |
| tmp[1] = x >> 8; |
| tmp[2] = y; |
| tmp[3] = y >> 8; |
| tmp[4] = x_end; |
| tmp[5] = x_end >> 8; |
| tmp[6] = y_end; |
| tmp[7] = y_end >> 8; |
| |
| /* scaling? */ |
| tmp[8] = x; |
| tmp[9] = x >> 8; |
| tmp[10] = y; |
| tmp[11] = y >> 8; |
| tmp[12] = x_end; |
| tmp[13] = x_end >> 8; |
| tmp[14] = y_end; |
| tmp[15] = y_end >> 8; |
| |
| tmp[16] = BLIZZARD_COLOR_RGB565; |
| |
| if (ddata->blizzard_ver == BLIZZARD_VERSION_S1D13745) |
| tmp[17] = BLIZZARD_SRC_WRITE_LCD_BACKGROUND; |
| else |
| tmp[17] = ddata->blizzard_ver == BLIZZARD_VERSION_S1D13744 ? |
| BLIZZARD_SRC_WRITE_LCD : |
| BLIZZARD_SRC_WRITE_LCD_DESTRUCTIVE; |
| |
| omap_rfbi_configure(dssdev, 16, 8); |
| |
| blizzard_write(BLIZZARD_INPUT_WIN_X_START_0, tmp, 18); |
| |
| omap_rfbi_configure(dssdev, 16, 16); |
| } |
| |
| static void mipid_transfer(struct spi_device *spi, int cmd, const u8 *wbuf, |
| int wlen, u8 *rbuf, int rlen) |
| { |
| struct spi_message m; |
| struct spi_transfer *x, xfer[4]; |
| u16 w; |
| int r; |
| |
| spi_message_init(&m); |
| |
| memset(xfer, 0, sizeof(xfer)); |
| x = &xfer[0]; |
| |
| cmd &= 0xff; |
| x->tx_buf = &cmd; |
| x->bits_per_word = 9; |
| x->len = 2; |
| spi_message_add_tail(x, &m); |
| |
| if (wlen) { |
| x++; |
| x->tx_buf = wbuf; |
| x->len = wlen; |
| x->bits_per_word = 9; |
| spi_message_add_tail(x, &m); |
| } |
| |
| if (rlen) { |
| x++; |
| x->rx_buf = &w; |
| x->len = 1; |
| spi_message_add_tail(x, &m); |
| |
| if (rlen > 1) { |
| /* Arrange for the extra clock before the first |
| * data bit. |
| */ |
| x->bits_per_word = 9; |
| x->len = 2; |
| |
| x++; |
| x->rx_buf = &rbuf[1]; |
| x->len = rlen - 1; |
| spi_message_add_tail(x, &m); |
| } |
| } |
| |
| r = spi_sync(spi, &m); |
| if (r < 0) |
| dev_dbg(&spi->dev, "spi_sync %d\n", r); |
| |
| if (rlen) |
| rbuf[0] = w & 0xff; |
| } |
| |
| static inline void mipid_cmd(struct spi_device *spi, int cmd) |
| { |
| mipid_transfer(spi, cmd, NULL, 0, NULL, 0); |
| } |
| |
| static inline void mipid_write(struct spi_device *spi, |
| int reg, const u8 *buf, int len) |
| { |
| mipid_transfer(spi, reg, buf, len, NULL, 0); |
| } |
| |
| static inline void mipid_read(struct spi_device *spi, |
| int reg, u8 *buf, int len) |
| { |
| mipid_transfer(spi, reg, NULL, 0, buf, len); |
| } |
| |
| static void set_data_lines(struct spi_device *spi, int data_lines) |
| { |
| u16 par; |
| |
| switch (data_lines) { |
| case 16: |
| par = 0x150; |
| break; |
| case 18: |
| par = 0x160; |
| break; |
| case 24: |
| par = 0x170; |
| break; |
| } |
| |
| mipid_write(spi, 0x3a, (u8 *)&par, 2); |
| } |
| |
| static void send_init_string(struct spi_device *spi) |
| { |
| u16 initpar[] = { 0x0102, 0x0100, 0x0100 }; |
| mipid_write(spi, 0xc2, (u8 *)initpar, sizeof(initpar)); |
| } |
| |
| static void send_display_on(struct spi_device *spi) |
| { |
| mipid_cmd(spi, MIPID_CMD_DISP_ON); |
| } |
| |
| static void send_display_off(struct spi_device *spi) |
| { |
| mipid_cmd(spi, MIPID_CMD_DISP_OFF); |
| } |
| |
| static void send_sleep_out(struct spi_device *spi) |
| { |
| mipid_cmd(spi, MIPID_CMD_SLEEP_OUT); |
| msleep(120); |
| } |
| |
| static void send_sleep_in(struct spi_device *spi) |
| { |
| mipid_cmd(spi, MIPID_CMD_SLEEP_IN); |
| msleep(50); |
| } |
| |
| static int n8x0_panel_power_on(struct omap_dss_device *dssdev) |
| { |
| int r; |
| struct panel_n8x0_data *bdata = get_board_data(dssdev); |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| struct spi_device *spi = ddata->spidev; |
| u8 rev, conf; |
| u8 display_id[3]; |
| const char *panel_name; |
| |
| if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) |
| return 0; |
| |
| gpio_direction_output(bdata->ctrl_pwrdown, 1); |
| |
| if (bdata->platform_enable) { |
| r = bdata->platform_enable(dssdev); |
| if (r) |
| goto err_plat_en; |
| } |
| |
| r = omapdss_rfbi_display_enable(dssdev); |
| if (r) |
| goto err_rfbi_en; |
| |
| rev = blizzard_read_reg(BLIZZARD_REV_CODE); |
| conf = blizzard_read_reg(BLIZZARD_CONFIG); |
| |
| switch (rev & 0xfc) { |
| case 0x9c: |
| ddata->blizzard_ver = BLIZZARD_VERSION_S1D13744; |
| dev_info(&dssdev->dev, "s1d13744 LCD controller rev %d " |
| "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); |
| break; |
| case 0xa4: |
| ddata->blizzard_ver = BLIZZARD_VERSION_S1D13745; |
| dev_info(&dssdev->dev, "s1d13745 LCD controller rev %d " |
| "initialized (CNF pins %x)\n", rev & 0x03, conf & 0x07); |
| break; |
| default: |
| dev_err(&dssdev->dev, "invalid s1d1374x revision %02x\n", rev); |
| r = -ENODEV; |
| goto err_inv_chip; |
| } |
| |
| /* panel */ |
| |
| gpio_direction_output(bdata->panel_reset, 1); |
| |
| mipid_read(spi, MIPID_CMD_READ_DISP_ID, display_id, 3); |
| dev_dbg(&spi->dev, "MIPI display ID: %02x%02x%02x\n", |
| display_id[0], display_id[1], display_id[2]); |
| |
| switch (display_id[0]) { |
| case 0x45: |
| panel_name = "lph8923"; |
| break; |
| case 0x83: |
| panel_name = "ls041y3"; |
| break; |
| default: |
| dev_err(&dssdev->dev, "invalid display ID 0x%x\n", |
| display_id[0]); |
| r = -ENODEV; |
| goto err_inv_panel; |
| } |
| |
| dev_info(&dssdev->dev, "%s rev %02x LCD detected\n", |
| panel_name, display_id[1]); |
| |
| send_sleep_out(spi); |
| send_init_string(spi); |
| set_data_lines(spi, 24); |
| send_display_on(spi); |
| |
| return 0; |
| |
| err_inv_panel: |
| /* |
| * HACK: we should turn off the panel here, but there is some problem |
| * with the initialization sequence, and we fail to init the panel if we |
| * have turned it off |
| */ |
| /* gpio_direction_output(bdata->panel_reset, 0); */ |
| err_inv_chip: |
| omapdss_rfbi_display_disable(dssdev); |
| err_rfbi_en: |
| if (bdata->platform_disable) |
| bdata->platform_disable(dssdev); |
| err_plat_en: |
| gpio_direction_output(bdata->ctrl_pwrdown, 0); |
| return r; |
| } |
| |
| static void n8x0_panel_power_off(struct omap_dss_device *dssdev) |
| { |
| struct panel_n8x0_data *bdata = get_board_data(dssdev); |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| struct spi_device *spi = ddata->spidev; |
| |
| if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) |
| return; |
| |
| send_display_off(spi); |
| send_sleep_in(spi); |
| |
| if (bdata->platform_disable) |
| bdata->platform_disable(dssdev); |
| |
| /* |
| * HACK: we should turn off the panel here, but there is some problem |
| * with the initialization sequence, and we fail to init the panel if we |
| * have turned it off |
| */ |
| /* gpio_direction_output(bdata->panel_reset, 0); */ |
| gpio_direction_output(bdata->ctrl_pwrdown, 0); |
| omapdss_rfbi_display_disable(dssdev); |
| } |
| |
| static const struct rfbi_timings n8x0_panel_timings = { |
| .cs_on_time = 0, |
| |
| .we_on_time = 9000, |
| .we_off_time = 18000, |
| .we_cycle_time = 36000, |
| |
| .re_on_time = 9000, |
| .re_off_time = 27000, |
| .re_cycle_time = 36000, |
| |
| .access_time = 27000, |
| .cs_off_time = 36000, |
| |
| .cs_pulse_width = 0, |
| }; |
| |
| static int n8x0_bl_update_status(struct backlight_device *dev) |
| { |
| struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev); |
| struct panel_n8x0_data *bdata = get_board_data(dssdev); |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| int r; |
| int level; |
| |
| mutex_lock(&ddata->lock); |
| |
| if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| dev->props.power == FB_BLANK_UNBLANK) |
| level = dev->props.brightness; |
| else |
| level = 0; |
| |
| dev_dbg(&dssdev->dev, "update brightness to %d\n", level); |
| |
| if (!bdata->set_backlight) |
| r = -EINVAL; |
| else |
| r = bdata->set_backlight(dssdev, level); |
| |
| mutex_unlock(&ddata->lock); |
| |
| return r; |
| } |
| |
| static int n8x0_bl_get_intensity(struct backlight_device *dev) |
| { |
| if (dev->props.fb_blank == FB_BLANK_UNBLANK && |
| dev->props.power == FB_BLANK_UNBLANK) |
| return dev->props.brightness; |
| |
| return 0; |
| } |
| |
| static const struct backlight_ops n8x0_bl_ops = { |
| .get_brightness = n8x0_bl_get_intensity, |
| .update_status = n8x0_bl_update_status, |
| }; |
| |
| static int n8x0_panel_probe(struct omap_dss_device *dssdev) |
| { |
| struct panel_n8x0_data *bdata = get_board_data(dssdev); |
| struct panel_drv_data *ddata; |
| struct backlight_device *bldev; |
| struct backlight_properties props; |
| int r; |
| |
| dev_dbg(&dssdev->dev, "probe\n"); |
| |
| if (!bdata) |
| return -EINVAL; |
| |
| s_drv_data.dssdev = dssdev; |
| |
| ddata = &s_drv_data; |
| |
| mutex_init(&ddata->lock); |
| |
| dssdev->panel.config = OMAP_DSS_LCD_TFT; |
| dssdev->panel.timings.x_res = 800; |
| dssdev->panel.timings.y_res = 480; |
| dssdev->ctrl.pixel_size = 16; |
| dssdev->ctrl.rfbi_timings = n8x0_panel_timings; |
| |
| memset(&props, 0, sizeof(props)); |
| props.max_brightness = 127; |
| props.type = BACKLIGHT_PLATFORM; |
| bldev = backlight_device_register(dev_name(&dssdev->dev), &dssdev->dev, |
| dssdev, &n8x0_bl_ops, &props); |
| if (IS_ERR(bldev)) { |
| r = PTR_ERR(bldev); |
| dev_err(&dssdev->dev, "register backlight failed\n"); |
| return r; |
| } |
| |
| ddata->bldev = bldev; |
| |
| bldev->props.fb_blank = FB_BLANK_UNBLANK; |
| bldev->props.power = FB_BLANK_UNBLANK; |
| bldev->props.brightness = 127; |
| |
| n8x0_bl_update_status(bldev); |
| |
| return 0; |
| } |
| |
| static void n8x0_panel_remove(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| struct backlight_device *bldev; |
| |
| dev_dbg(&dssdev->dev, "remove\n"); |
| |
| bldev = ddata->bldev; |
| bldev->props.power = FB_BLANK_POWERDOWN; |
| n8x0_bl_update_status(bldev); |
| backlight_device_unregister(bldev); |
| |
| dev_set_drvdata(&dssdev->dev, NULL); |
| } |
| |
| static int n8x0_panel_enable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| int r; |
| |
| dev_dbg(&dssdev->dev, "enable\n"); |
| |
| mutex_lock(&ddata->lock); |
| |
| rfbi_bus_lock(); |
| |
| r = n8x0_panel_power_on(dssdev); |
| |
| rfbi_bus_unlock(); |
| |
| if (r) { |
| mutex_unlock(&ddata->lock); |
| return r; |
| } |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| mutex_unlock(&ddata->lock); |
| |
| return 0; |
| } |
| |
| static void n8x0_panel_disable(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| |
| dev_dbg(&dssdev->dev, "disable\n"); |
| |
| mutex_lock(&ddata->lock); |
| |
| rfbi_bus_lock(); |
| |
| n8x0_panel_power_off(dssdev); |
| |
| rfbi_bus_unlock(); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_DISABLED; |
| |
| mutex_unlock(&ddata->lock); |
| } |
| |
| static int n8x0_panel_suspend(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| |
| dev_dbg(&dssdev->dev, "suspend\n"); |
| |
| mutex_lock(&ddata->lock); |
| |
| rfbi_bus_lock(); |
| |
| n8x0_panel_power_off(dssdev); |
| |
| rfbi_bus_unlock(); |
| |
| dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; |
| |
| mutex_unlock(&ddata->lock); |
| |
| return 0; |
| } |
| |
| static int n8x0_panel_resume(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| int r; |
| |
| dev_dbg(&dssdev->dev, "resume\n"); |
| |
| mutex_lock(&ddata->lock); |
| |
| rfbi_bus_lock(); |
| |
| r = n8x0_panel_power_on(dssdev); |
| |
| rfbi_bus_unlock(); |
| |
| if (r) { |
| mutex_unlock(&ddata->lock); |
| return r; |
| } |
| |
| dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; |
| |
| mutex_unlock(&ddata->lock); |
| |
| return 0; |
| } |
| |
| static void n8x0_panel_get_timings(struct omap_dss_device *dssdev, |
| struct omap_video_timings *timings) |
| { |
| *timings = dssdev->panel.timings; |
| } |
| |
| static void n8x0_panel_get_resolution(struct omap_dss_device *dssdev, |
| u16 *xres, u16 *yres) |
| { |
| *xres = dssdev->panel.timings.x_res; |
| *yres = dssdev->panel.timings.y_res; |
| } |
| |
| static void update_done(void *data) |
| { |
| rfbi_bus_unlock(); |
| } |
| |
| static int n8x0_panel_update(struct omap_dss_device *dssdev, |
| u16 x, u16 y, u16 w, u16 h) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| |
| dev_dbg(&dssdev->dev, "update\n"); |
| |
| mutex_lock(&ddata->lock); |
| rfbi_bus_lock(); |
| |
| omap_rfbi_prepare_update(dssdev, &x, &y, &w, &h); |
| |
| blizzard_ctrl_setup_update(dssdev, x, y, w, h); |
| |
| omap_rfbi_update(dssdev, x, y, w, h, update_done, NULL); |
| |
| mutex_unlock(&ddata->lock); |
| |
| return 0; |
| } |
| |
| static int n8x0_panel_sync(struct omap_dss_device *dssdev) |
| { |
| struct panel_drv_data *ddata = get_drv_data(dssdev); |
| |
| dev_dbg(&dssdev->dev, "sync\n"); |
| |
| mutex_lock(&ddata->lock); |
| rfbi_bus_lock(); |
| rfbi_bus_unlock(); |
| mutex_unlock(&ddata->lock); |
| |
| return 0; |
| } |
| |
| static struct omap_dss_driver n8x0_panel_driver = { |
| .probe = n8x0_panel_probe, |
| .remove = n8x0_panel_remove, |
| |
| .enable = n8x0_panel_enable, |
| .disable = n8x0_panel_disable, |
| .suspend = n8x0_panel_suspend, |
| .resume = n8x0_panel_resume, |
| |
| .update = n8x0_panel_update, |
| .sync = n8x0_panel_sync, |
| |
| .get_resolution = n8x0_panel_get_resolution, |
| .get_recommended_bpp = omapdss_default_get_recommended_bpp, |
| |
| .get_timings = n8x0_panel_get_timings, |
| |
| .driver = { |
| .name = "n8x0_panel", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| /* PANEL */ |
| |
| static int mipid_spi_probe(struct spi_device *spi) |
| { |
| dev_dbg(&spi->dev, "mipid_spi_probe\n"); |
| |
| spi->mode = SPI_MODE_0; |
| |
| s_drv_data.spidev = spi; |
| |
| return 0; |
| } |
| |
| static int mipid_spi_remove(struct spi_device *spi) |
| { |
| dev_dbg(&spi->dev, "mipid_spi_remove\n"); |
| return 0; |
| } |
| |
| static struct spi_driver mipid_spi_driver = { |
| .driver = { |
| .name = "lcd_mipid", |
| .owner = THIS_MODULE, |
| }, |
| .probe = mipid_spi_probe, |
| .remove = __devexit_p(mipid_spi_remove), |
| }; |
| |
| static int __init n8x0_panel_drv_init(void) |
| { |
| int r; |
| |
| r = spi_register_driver(&mipid_spi_driver); |
| if (r) { |
| pr_err("n8x0_panel: spi driver registration failed\n"); |
| return r; |
| } |
| |
| r = omap_dss_register_driver(&n8x0_panel_driver); |
| if (r) { |
| pr_err("n8x0_panel: dss driver registration failed\n"); |
| spi_unregister_driver(&mipid_spi_driver); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static void __exit n8x0_panel_drv_exit(void) |
| { |
| spi_unregister_driver(&mipid_spi_driver); |
| |
| omap_dss_unregister_driver(&n8x0_panel_driver); |
| } |
| |
| module_init(n8x0_panel_drv_init); |
| module_exit(n8x0_panel_drv_exit); |
| MODULE_LICENSE("GPL"); |