[SCSI] sgiwd93: interfacing to wd33c93

1) sgiwd93 used to switch off asynchronous mode on the wd33c93, discarding
   any "nosync"-requests from the commandline.
   But we need to allow "nosync"-requests for selected devices, for example
   the Pioneer DVD305S.
   (For the curious: this device accepts the SDTR from wd33c93 and success-
   fully sends inquiry data in sync mode, but after the data phase in the
   inquiry command does an unexpected disconnect, seemingly sending no
   "status" or "command complete". Forcing async transfers makes it work
   together flawlessly with the wd33c93. Of course, preferable would be, to
   implement wd33c93's "resume command" stuff, but that probably will not
   come soon.)

2) Maximize benefit from the preceding Fast SCSI patch for wd33c93 by passing
   the higher input-clock frequency explicitely. To be applied after the
   mentioned wd33c93 patch.

Signed-off-by: peter fuerst <post@pfrst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
diff --git a/drivers/scsi/sgiwd93.c b/drivers/scsi/sgiwd93.c
index e81f97a..a15752b 100644
--- a/drivers/scsi/sgiwd93.c
+++ b/drivers/scsi/sgiwd93.c
@@ -244,9 +244,10 @@
 	regs.SASR = wdregs + 3;
 	regs.SCMD = wdregs + 7;
 
-	wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_16_20);
+	wd33c93_init(host, regs, dma_setup, dma_stop, WD33C93_FS_MHZ(20));
 
-	hdata->wh.no_sync = 0;
+	if (hdata->wh.no_sync == 0xff)
+		hdata->wh.no_sync = 0;
 
 	if (request_irq(irq, sgiwd93_intr, 0, "SGI WD93", (void *) host)) {
 		printk(KERN_WARNING "sgiwd93: Could not register irq %d "