| /****************************************************************************** |
| ******************************************************************************* |
| ** |
| ** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved. |
| ** Copyright (C) 2005 Red Hat, Inc. All rights reserved. |
| ** |
| ** This copyrighted material is made available to anyone wishing to use, |
| ** modify, copy, or redistribute it subject to the terms and conditions |
| ** of the GNU General Public License v.2. |
| ** |
| ******************************************************************************* |
| ******************************************************************************/ |
| |
| #include "dlm_internal.h" |
| #include "lockspace.h" |
| #include "member.h" |
| #include "lowcomms.h" |
| #include "midcomms.h" |
| #include "rcom.h" |
| #include "recover.h" |
| #include "dir.h" |
| #include "config.h" |
| #include "memory.h" |
| #include "lock.h" |
| #include "util.h" |
| |
| |
| static int rcom_response(struct dlm_ls *ls) |
| { |
| return test_bit(LSFL_RCOM_READY, &ls->ls_flags); |
| } |
| |
| static int create_rcom(struct dlm_ls *ls, int to_nodeid, int type, int len, |
| struct dlm_rcom **rc_ret, struct dlm_mhandle **mh_ret) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| char *mb; |
| int mb_len = sizeof(struct dlm_rcom) + len; |
| |
| mh = dlm_lowcomms_get_buffer(to_nodeid, mb_len, GFP_KERNEL, &mb); |
| if (!mh) { |
| log_print("create_rcom to %d type %d len %d ENOBUFS", |
| to_nodeid, type, len); |
| return -ENOBUFS; |
| } |
| memset(mb, 0, mb_len); |
| |
| rc = (struct dlm_rcom *) mb; |
| |
| rc->rc_header.h_version = (DLM_HEADER_MAJOR | DLM_HEADER_MINOR); |
| rc->rc_header.h_lockspace = ls->ls_global_id; |
| rc->rc_header.h_nodeid = dlm_our_nodeid(); |
| rc->rc_header.h_length = mb_len; |
| rc->rc_header.h_cmd = DLM_RCOM; |
| |
| rc->rc_type = type; |
| |
| *mh_ret = mh; |
| *rc_ret = rc; |
| return 0; |
| } |
| |
| static void send_rcom(struct dlm_ls *ls, struct dlm_mhandle *mh, |
| struct dlm_rcom *rc) |
| { |
| dlm_rcom_out(rc); |
| dlm_lowcomms_commit_buffer(mh); |
| } |
| |
| /* When replying to a status request, a node also sends back its |
| configuration values. The requesting node then checks that the remote |
| node is configured the same way as itself. */ |
| |
| static void make_config(struct dlm_ls *ls, struct rcom_config *rf) |
| { |
| rf->rf_lvblen = ls->ls_lvblen; |
| rf->rf_lsflags = ls->ls_exflags; |
| } |
| |
| static int check_config(struct dlm_ls *ls, struct rcom_config *rf, int nodeid) |
| { |
| if (rf->rf_lvblen != ls->ls_lvblen || |
| rf->rf_lsflags != ls->ls_exflags) { |
| log_error(ls, "config mismatch: %d,%x nodeid %d: %d,%x", |
| ls->ls_lvblen, ls->ls_exflags, |
| nodeid, rf->rf_lvblen, rf->rf_lsflags); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| int dlm_rcom_status(struct dlm_ls *ls, int nodeid) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| int error = 0; |
| |
| memset(ls->ls_recover_buf, 0, dlm_config.buffer_size); |
| ls->ls_recover_nodeid = nodeid; |
| |
| if (nodeid == dlm_our_nodeid()) { |
| rc = (struct dlm_rcom *) ls->ls_recover_buf; |
| rc->rc_result = dlm_recover_status(ls); |
| goto out; |
| } |
| |
| error = create_rcom(ls, nodeid, DLM_RCOM_STATUS, 0, &rc, &mh); |
| if (error) |
| goto out; |
| rc->rc_id = ++ls->ls_rcom_seq; |
| |
| send_rcom(ls, mh, rc); |
| |
| error = dlm_wait_function(ls, &rcom_response); |
| clear_bit(LSFL_RCOM_READY, &ls->ls_flags); |
| if (error) |
| goto out; |
| |
| rc = (struct dlm_rcom *) ls->ls_recover_buf; |
| |
| if (rc->rc_result == -ESRCH) { |
| /* we pretend the remote lockspace exists with 0 status */ |
| log_debug(ls, "remote node %d not ready", nodeid); |
| rc->rc_result = 0; |
| } else |
| error = check_config(ls, (struct rcom_config *) rc->rc_buf, |
| nodeid); |
| /* the caller looks at rc_result for the remote recovery status */ |
| out: |
| return error; |
| } |
| |
| static void receive_rcom_status(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| int error, nodeid = rc_in->rc_header.h_nodeid; |
| |
| error = create_rcom(ls, nodeid, DLM_RCOM_STATUS_REPLY, |
| sizeof(struct rcom_config), &rc, &mh); |
| if (error) |
| return; |
| rc->rc_id = rc_in->rc_id; |
| rc->rc_result = dlm_recover_status(ls); |
| make_config(ls, (struct rcom_config *) rc->rc_buf); |
| |
| send_rcom(ls, mh, rc); |
| } |
| |
| static void receive_sync_reply(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| if (rc_in->rc_id != ls->ls_rcom_seq) { |
| log_debug(ls, "reject old reply %d got %llx wanted %llx", |
| rc_in->rc_type, rc_in->rc_id, ls->ls_rcom_seq); |
| return; |
| } |
| memcpy(ls->ls_recover_buf, rc_in, rc_in->rc_header.h_length); |
| set_bit(LSFL_RCOM_READY, &ls->ls_flags); |
| wake_up(&ls->ls_wait_general); |
| } |
| |
| static void receive_rcom_status_reply(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| receive_sync_reply(ls, rc_in); |
| } |
| |
| int dlm_rcom_names(struct dlm_ls *ls, int nodeid, char *last_name, int last_len) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| int error = 0, len = sizeof(struct dlm_rcom); |
| |
| memset(ls->ls_recover_buf, 0, dlm_config.buffer_size); |
| ls->ls_recover_nodeid = nodeid; |
| |
| if (nodeid == dlm_our_nodeid()) { |
| dlm_copy_master_names(ls, last_name, last_len, |
| ls->ls_recover_buf + len, |
| dlm_config.buffer_size - len, nodeid); |
| goto out; |
| } |
| |
| error = create_rcom(ls, nodeid, DLM_RCOM_NAMES, last_len, &rc, &mh); |
| if (error) |
| goto out; |
| memcpy(rc->rc_buf, last_name, last_len); |
| rc->rc_id = ++ls->ls_rcom_seq; |
| |
| send_rcom(ls, mh, rc); |
| |
| error = dlm_wait_function(ls, &rcom_response); |
| clear_bit(LSFL_RCOM_READY, &ls->ls_flags); |
| out: |
| return error; |
| } |
| |
| static void receive_rcom_names(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| int error, inlen, outlen; |
| int nodeid = rc_in->rc_header.h_nodeid; |
| uint32_t status = dlm_recover_status(ls); |
| |
| /* |
| * We can't run dlm_dir_rebuild_send (which uses ls_nodes) while |
| * dlm_recoverd is running ls_nodes_reconfig (which changes ls_nodes). |
| * It could only happen in rare cases where we get a late NAMES |
| * message from a previous instance of recovery. |
| */ |
| |
| if (!(status & DLM_RS_NODES)) { |
| log_debug(ls, "ignoring RCOM_NAMES from %u", nodeid); |
| return; |
| } |
| |
| nodeid = rc_in->rc_header.h_nodeid; |
| inlen = rc_in->rc_header.h_length - sizeof(struct dlm_rcom); |
| outlen = dlm_config.buffer_size - sizeof(struct dlm_rcom); |
| |
| error = create_rcom(ls, nodeid, DLM_RCOM_NAMES_REPLY, outlen, &rc, &mh); |
| if (error) |
| return; |
| rc->rc_id = rc_in->rc_id; |
| |
| dlm_copy_master_names(ls, rc_in->rc_buf, inlen, rc->rc_buf, outlen, |
| nodeid); |
| send_rcom(ls, mh, rc); |
| } |
| |
| static void receive_rcom_names_reply(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| receive_sync_reply(ls, rc_in); |
| } |
| |
| int dlm_send_rcom_lookup(struct dlm_rsb *r, int dir_nodeid) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| struct dlm_ls *ls = r->res_ls; |
| int error; |
| |
| error = create_rcom(ls, dir_nodeid, DLM_RCOM_LOOKUP, r->res_length, |
| &rc, &mh); |
| if (error) |
| goto out; |
| memcpy(rc->rc_buf, r->res_name, r->res_length); |
| rc->rc_id = (unsigned long) r; |
| |
| send_rcom(ls, mh, rc); |
| out: |
| return error; |
| } |
| |
| static void receive_rcom_lookup(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| int error, ret_nodeid, nodeid = rc_in->rc_header.h_nodeid; |
| int len = rc_in->rc_header.h_length - sizeof(struct dlm_rcom); |
| |
| error = create_rcom(ls, nodeid, DLM_RCOM_LOOKUP_REPLY, 0, &rc, &mh); |
| if (error) |
| return; |
| |
| error = dlm_dir_lookup(ls, nodeid, rc_in->rc_buf, len, &ret_nodeid); |
| if (error) |
| ret_nodeid = error; |
| rc->rc_result = ret_nodeid; |
| rc->rc_id = rc_in->rc_id; |
| |
| send_rcom(ls, mh, rc); |
| } |
| |
| static void receive_rcom_lookup_reply(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| dlm_recover_master_reply(ls, rc_in); |
| } |
| |
| static void pack_rcom_lock(struct dlm_rsb *r, struct dlm_lkb *lkb, |
| struct rcom_lock *rl) |
| { |
| memset(rl, 0, sizeof(*rl)); |
| |
| rl->rl_ownpid = lkb->lkb_ownpid; |
| rl->rl_lkid = lkb->lkb_id; |
| rl->rl_exflags = lkb->lkb_exflags; |
| rl->rl_flags = lkb->lkb_flags; |
| rl->rl_lvbseq = lkb->lkb_lvbseq; |
| rl->rl_rqmode = lkb->lkb_rqmode; |
| rl->rl_grmode = lkb->lkb_grmode; |
| rl->rl_status = lkb->lkb_status; |
| rl->rl_wait_type = lkb->lkb_wait_type; |
| |
| if (lkb->lkb_bastaddr) |
| rl->rl_asts |= AST_BAST; |
| if (lkb->lkb_astaddr) |
| rl->rl_asts |= AST_COMP; |
| |
| rl->rl_namelen = r->res_length; |
| memcpy(rl->rl_name, r->res_name, r->res_length); |
| |
| /* FIXME: might we have an lvb without DLM_LKF_VALBLK set ? |
| If so, receive_rcom_lock_args() won't take this copy. */ |
| |
| if (lkb->lkb_lvbptr) |
| memcpy(rl->rl_lvb, lkb->lkb_lvbptr, r->res_ls->ls_lvblen); |
| } |
| |
| int dlm_send_rcom_lock(struct dlm_rsb *r, struct dlm_lkb *lkb) |
| { |
| struct dlm_ls *ls = r->res_ls; |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| struct rcom_lock *rl; |
| int error, len = sizeof(struct rcom_lock); |
| |
| if (lkb->lkb_lvbptr) |
| len += ls->ls_lvblen; |
| |
| error = create_rcom(ls, r->res_nodeid, DLM_RCOM_LOCK, len, &rc, &mh); |
| if (error) |
| goto out; |
| |
| rl = (struct rcom_lock *) rc->rc_buf; |
| pack_rcom_lock(r, lkb, rl); |
| rc->rc_id = (unsigned long) r; |
| |
| send_rcom(ls, mh, rc); |
| out: |
| return error; |
| } |
| |
| static void receive_rcom_lock(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| int error, nodeid = rc_in->rc_header.h_nodeid; |
| |
| dlm_recover_master_copy(ls, rc_in); |
| |
| error = create_rcom(ls, nodeid, DLM_RCOM_LOCK_REPLY, |
| sizeof(struct rcom_lock), &rc, &mh); |
| if (error) |
| return; |
| |
| /* We send back the same rcom_lock struct we received, but |
| dlm_recover_master_copy() has filled in rl_remid and rl_result */ |
| |
| memcpy(rc->rc_buf, rc_in->rc_buf, sizeof(struct rcom_lock)); |
| rc->rc_id = rc_in->rc_id; |
| |
| send_rcom(ls, mh, rc); |
| } |
| |
| static void receive_rcom_lock_reply(struct dlm_ls *ls, struct dlm_rcom *rc_in) |
| { |
| uint32_t status = dlm_recover_status(ls); |
| |
| if (!(status & DLM_RS_DIR)) { |
| log_debug(ls, "ignoring RCOM_LOCK_REPLY from %u", |
| rc_in->rc_header.h_nodeid); |
| return; |
| } |
| |
| dlm_recover_process_copy(ls, rc_in); |
| } |
| |
| static int send_ls_not_ready(int nodeid, struct dlm_rcom *rc_in) |
| { |
| struct dlm_rcom *rc; |
| struct dlm_mhandle *mh; |
| char *mb; |
| int mb_len = sizeof(struct dlm_rcom); |
| |
| mh = dlm_lowcomms_get_buffer(nodeid, mb_len, GFP_KERNEL, &mb); |
| if (!mh) |
| return -ENOBUFS; |
| memset(mb, 0, mb_len); |
| |
| rc = (struct dlm_rcom *) mb; |
| |
| rc->rc_header.h_version = (DLM_HEADER_MAJOR | DLM_HEADER_MINOR); |
| rc->rc_header.h_lockspace = rc_in->rc_header.h_lockspace; |
| rc->rc_header.h_nodeid = dlm_our_nodeid(); |
| rc->rc_header.h_length = mb_len; |
| rc->rc_header.h_cmd = DLM_RCOM; |
| |
| rc->rc_type = DLM_RCOM_STATUS_REPLY; |
| rc->rc_id = rc_in->rc_id; |
| rc->rc_result = -ESRCH; |
| |
| dlm_rcom_out(rc); |
| dlm_lowcomms_commit_buffer(mh); |
| |
| return 0; |
| } |
| |
| /* Called by dlm_recvd; corresponds to dlm_receive_message() but special |
| recovery-only comms are sent through here. */ |
| |
| void dlm_receive_rcom(struct dlm_header *hd, int nodeid) |
| { |
| struct dlm_rcom *rc = (struct dlm_rcom *) hd; |
| struct dlm_ls *ls; |
| |
| dlm_rcom_in(rc); |
| |
| /* If the lockspace doesn't exist then still send a status message |
| back; it's possible that it just doesn't have its global_id yet. */ |
| |
| ls = dlm_find_lockspace_global(hd->h_lockspace); |
| if (!ls) { |
| log_print("lockspace %x from %d not found", |
| hd->h_lockspace, nodeid); |
| send_ls_not_ready(nodeid, rc); |
| return; |
| } |
| |
| if (dlm_recovery_stopped(ls) && (rc->rc_type != DLM_RCOM_STATUS)) { |
| log_error(ls, "ignoring recovery message %x from %d", |
| rc->rc_type, nodeid); |
| goto out; |
| } |
| |
| if (nodeid != rc->rc_header.h_nodeid) { |
| log_error(ls, "bad rcom nodeid %d from %d", |
| rc->rc_header.h_nodeid, nodeid); |
| goto out; |
| } |
| |
| switch (rc->rc_type) { |
| case DLM_RCOM_STATUS: |
| receive_rcom_status(ls, rc); |
| break; |
| |
| case DLM_RCOM_NAMES: |
| receive_rcom_names(ls, rc); |
| break; |
| |
| case DLM_RCOM_LOOKUP: |
| receive_rcom_lookup(ls, rc); |
| break; |
| |
| case DLM_RCOM_LOCK: |
| receive_rcom_lock(ls, rc); |
| break; |
| |
| case DLM_RCOM_STATUS_REPLY: |
| receive_rcom_status_reply(ls, rc); |
| break; |
| |
| case DLM_RCOM_NAMES_REPLY: |
| receive_rcom_names_reply(ls, rc); |
| break; |
| |
| case DLM_RCOM_LOOKUP_REPLY: |
| receive_rcom_lookup_reply(ls, rc); |
| break; |
| |
| case DLM_RCOM_LOCK_REPLY: |
| receive_rcom_lock_reply(ls, rc); |
| break; |
| |
| default: |
| DLM_ASSERT(0, printk("rc_type=%x\n", rc->rc_type);); |
| } |
| out: |
| dlm_put_lockspace(ls); |
| } |
| |