V4L/DVB (8643): Switch Hauppauge HVR1400 and HVR1500 to common cx23885 tuner callback
The Hauppauge HVR1400 and HVR1500 can now use the common cx23885 tuner
callback.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index e5e688e..93ad7f8 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -26,6 +26,7 @@
#include <media/cx25840.h>
#include "cx23885.h"
+#include "tuner-xc2028.h"
/* ------------------------------------------------------------------ */
/* board config info */
@@ -331,8 +332,10 @@
}
switch(dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1400:
+ case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
- /* Tuner Reset Command from xc5000 */
+ /* Tuner Reset Command */
if (command == 0)
bitmask = 0x04;
break;
@@ -367,6 +370,17 @@
return cx23885_tuner_callback(dev, bus->nr, command, arg);
}
+int cx23885_xc3028_tuner_callback(void *priv, int command, int arg)
+{
+ struct cx23885_tsport *port = priv;
+ struct cx23885_dev *dev = port->dev;
+
+ if (command == XC2028_RESET_CLK)
+ return 0;
+
+ return cx23885_tuner_callback(dev, port->nr, command, arg);
+}
+
void cx23885_gpio_setup(struct cx23885_dev *dev)
{
switch(dev->board) {
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index bfe49df..4567005 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -303,36 +303,6 @@
.output_mode = OUTMODE_MPEG2_SERIAL,
};
-static int cx23885_hvr1500_xc3028_callback(void *ptr, int command, int arg)
-{
- struct cx23885_tsport *port = ptr;
- struct cx23885_dev *dev = port->dev;
-
- switch (command) {
- case XC2028_TUNER_RESET:
- /* Send the tuner in then out of reset */
- /* GPIO-2 xc3028 tuner */
- dprintk(1, "%s: XC2028_TUNER_RESET %d\n", __func__, arg);
-
- cx_set(GP0_IO, 0x00040000);
- cx_clear(GP0_IO, 0x00000004);
- msleep(5);
-
- cx_set(GP0_IO, 0x00040004);
- msleep(5);
- break;
- case XC2028_RESET_CLK:
- dprintk(1, "%s: XC2028_RESET_CLK %d\n", __func__, arg);
- break;
- default:
- dprintk(1, "%s: unknown command %d, arg %d\n", __func__,
- command, arg);
- return -EINVAL;
- }
-
- return 0;
-}
-
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -426,7 +396,7 @@
struct xc2028_config cfg = {
.i2c_adap = &i2c_bus->i2c_adap,
.i2c_addr = 0x61,
- .callback = cx23885_hvr1500_xc3028_callback,
+ .callback = cx23885_xc3028_tuner_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028-v27.fw",
@@ -465,7 +435,7 @@
struct xc2028_config cfg = {
.i2c_adap = &dev->i2c_bus[1].i2c_adap,
.i2c_addr = 0x64,
- .callback = cx23885_hvr1500_xc3028_callback,
+ .callback = cx23885_xc3028_tuner_callback,
};
static struct xc2028_ctrl ctl = {
.fname = "xc3028L-v36.fw",
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index c3478b2..64827fb 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -410,6 +410,7 @@
extern const unsigned int cx23885_idcount;
extern int cx23885_xc5000_tuner_callback(void *priv, int command, int arg);
+extern int cx23885_xc3028_tuner_callback(void *priv, int command, int arg);
extern void cx23885_card_list(struct cx23885_dev *dev);
extern int cx23885_ir_init(struct cx23885_dev *dev);
extern void cx23885_gpio_setup(struct cx23885_dev *dev);