| /* |
| * drivers/s390/cio/device_id.c |
| * |
| * Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, |
| * IBM Corporation |
| * Author(s): Cornelia Huck(cohuck@de.ibm.com) |
| * Martin Schwidefsky (schwidefsky@de.ibm.com) |
| * |
| * Sense ID functions. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/config.h> |
| #include <linux/init.h> |
| |
| #include <asm/ccwdev.h> |
| #include <asm/delay.h> |
| #include <asm/cio.h> |
| #include <asm/lowcore.h> |
| |
| #include "cio.h" |
| #include "cio_debug.h" |
| #include "css.h" |
| #include "device.h" |
| #include "ioasm.h" |
| |
| /* |
| * diag210 is used under VM to get information about a virtual device |
| */ |
| #ifdef CONFIG_ARCH_S390X |
| int |
| diag210(struct diag210 * addr) |
| { |
| /* |
| * diag 210 needs its data below the 2GB border, so we |
| * use a static data area to be sure |
| */ |
| static struct diag210 diag210_tmp; |
| static DEFINE_SPINLOCK(diag210_lock); |
| unsigned long flags; |
| int ccode; |
| |
| spin_lock_irqsave(&diag210_lock, flags); |
| diag210_tmp = *addr; |
| |
| asm volatile ( |
| " lhi %0,-1\n" |
| " sam31\n" |
| " diag %1,0,0x210\n" |
| "0: ipm %0\n" |
| " srl %0,28\n" |
| "1: sam64\n" |
| ".section __ex_table,\"a\"\n" |
| " .align 8\n" |
| " .quad 0b,1b\n" |
| ".previous" |
| : "=&d" (ccode) : "a" (__pa(&diag210_tmp)) : "cc", "memory" ); |
| |
| *addr = diag210_tmp; |
| spin_unlock_irqrestore(&diag210_lock, flags); |
| |
| return ccode; |
| } |
| #else |
| int |
| diag210(struct diag210 * addr) |
| { |
| int ccode; |
| |
| asm volatile ( |
| " lhi %0,-1\n" |
| " diag %1,0,0x210\n" |
| "0: ipm %0\n" |
| " srl %0,28\n" |
| "1:\n" |
| ".section __ex_table,\"a\"\n" |
| " .align 4\n" |
| " .long 0b,1b\n" |
| ".previous" |
| : "=&d" (ccode) : "a" (__pa(addr)) : "cc", "memory" ); |
| |
| return ccode; |
| } |
| #endif |
| |
| /* |
| * Input : |
| * devno - device number |
| * ps - pointer to sense ID data area |
| * Output : none |
| */ |
| static void |
| VM_virtual_device_info (__u16 devno, struct senseid *ps) |
| { |
| static struct { |
| int vrdcvcla, vrdcvtyp, cu_type; |
| } vm_devices[] = { |
| { 0x08, 0x01, 0x3480 }, |
| { 0x08, 0x02, 0x3430 }, |
| { 0x08, 0x10, 0x3420 }, |
| { 0x08, 0x42, 0x3424 }, |
| { 0x08, 0x44, 0x9348 }, |
| { 0x08, 0x81, 0x3490 }, |
| { 0x08, 0x82, 0x3422 }, |
| { 0x10, 0x41, 0x1403 }, |
| { 0x10, 0x42, 0x3211 }, |
| { 0x10, 0x43, 0x3203 }, |
| { 0x10, 0x45, 0x3800 }, |
| { 0x10, 0x47, 0x3262 }, |
| { 0x10, 0x48, 0x3820 }, |
| { 0x10, 0x49, 0x3800 }, |
| { 0x10, 0x4a, 0x4245 }, |
| { 0x10, 0x4b, 0x4248 }, |
| { 0x10, 0x4d, 0x3800 }, |
| { 0x10, 0x4e, 0x3820 }, |
| { 0x10, 0x4f, 0x3820 }, |
| { 0x10, 0x82, 0x2540 }, |
| { 0x10, 0x84, 0x3525 }, |
| { 0x20, 0x81, 0x2501 }, |
| { 0x20, 0x82, 0x2540 }, |
| { 0x20, 0x84, 0x3505 }, |
| { 0x40, 0x01, 0x3278 }, |
| { 0x40, 0x04, 0x3277 }, |
| { 0x40, 0x80, 0x2250 }, |
| { 0x40, 0xc0, 0x5080 }, |
| { 0x80, 0x00, 0x3215 }, |
| }; |
| struct diag210 diag_data; |
| int ccode, i; |
| |
| CIO_TRACE_EVENT (4, "VMvdinf"); |
| |
| diag_data = (struct diag210) { |
| .vrdcdvno = devno, |
| .vrdclen = sizeof (diag_data), |
| }; |
| |
| ccode = diag210 (&diag_data); |
| ps->reserved = 0xff; |
| |
| /* Special case for bloody osa devices. */ |
| if (diag_data.vrdcvcla == 0x02 && |
| diag_data.vrdcvtyp == 0x20) { |
| ps->cu_type = 0x3088; |
| ps->cu_model = 0x60; |
| return; |
| } |
| for (i = 0; i < sizeof(vm_devices) / sizeof(vm_devices[0]); i++) |
| if (diag_data.vrdcvcla == vm_devices[i].vrdcvcla && |
| diag_data.vrdcvtyp == vm_devices[i].vrdcvtyp) { |
| ps->cu_type = vm_devices[i].cu_type; |
| return; |
| } |
| CIO_MSG_EVENT(0, "DIAG X'210' for device %04X returned (cc = %d):" |
| "vdev class : %02X, vdev type : %04X \n ... " |
| "rdev class : %02X, rdev type : %04X, " |
| "rdev model: %02X\n", |
| devno, ccode, |
| diag_data.vrdcvcla, diag_data.vrdcvtyp, |
| diag_data.vrdcrccl, diag_data.vrdccrty, |
| diag_data.vrdccrmd); |
| } |
| |
| /* |
| * Start Sense ID helper function. |
| * Try to obtain the 'control unit'/'device type' information |
| * associated with the subchannel. |
| */ |
| static int |
| __ccw_device_sense_id_start(struct ccw_device *cdev) |
| { |
| struct subchannel *sch; |
| struct ccw1 *ccw; |
| int ret; |
| |
| sch = to_subchannel(cdev->dev.parent); |
| /* Setup sense channel program. */ |
| ccw = cdev->private->iccws; |
| if (sch->schib.pmcw.pim != 0x80) { |
| /* more than one path installed. */ |
| ccw->cmd_code = CCW_CMD_SUSPEND_RECONN; |
| ccw->cda = 0; |
| ccw->count = 0; |
| ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC; |
| ccw++; |
| } |
| ccw->cmd_code = CCW_CMD_SENSE_ID; |
| ccw->cda = (__u32) __pa (&cdev->private->senseid); |
| ccw->count = sizeof (struct senseid); |
| ccw->flags = CCW_FLAG_SLI; |
| |
| /* Reset device status. */ |
| memset(&cdev->private->irb, 0, sizeof(struct irb)); |
| |
| /* Try on every path. */ |
| ret = -ENODEV; |
| while (cdev->private->imask != 0) { |
| if ((sch->opm & cdev->private->imask) != 0 && |
| cdev->private->iretry > 0) { |
| cdev->private->iretry--; |
| ret = cio_start (sch, cdev->private->iccws, |
| cdev->private->imask); |
| /* ret is 0, -EBUSY, -EACCES or -ENODEV */ |
| if (ret != -EACCES) |
| return ret; |
| } |
| cdev->private->imask >>= 1; |
| cdev->private->iretry = 5; |
| } |
| return ret; |
| } |
| |
| void |
| ccw_device_sense_id_start(struct ccw_device *cdev) |
| { |
| int ret; |
| |
| memset (&cdev->private->senseid, 0, sizeof (struct senseid)); |
| cdev->private->senseid.cu_type = 0xFFFF; |
| cdev->private->imask = 0x80; |
| cdev->private->iretry = 5; |
| ret = __ccw_device_sense_id_start(cdev); |
| if (ret && ret != -EBUSY) |
| ccw_device_sense_id_done(cdev, ret); |
| } |
| |
| /* |
| * Called from interrupt context to check if a valid answer |
| * to Sense ID was received. |
| */ |
| static int |
| ccw_device_check_sense_id(struct ccw_device *cdev) |
| { |
| struct subchannel *sch; |
| struct irb *irb; |
| |
| sch = to_subchannel(cdev->dev.parent); |
| irb = &cdev->private->irb; |
| /* Did we get a proper answer ? */ |
| if (cdev->private->senseid.cu_type != 0xFFFF && |
| cdev->private->senseid.reserved == 0xFF) { |
| if (irb->scsw.count < sizeof (struct senseid) - 8) |
| cdev->private->flags.esid = 1; |
| return 0; /* Success */ |
| } |
| /* Check the error cases. */ |
| if (irb->scsw.fctl & (SCSW_FCTL_HALT_FUNC | SCSW_FCTL_CLEAR_FUNC)) |
| return -ETIME; |
| if (irb->esw.esw0.erw.cons && (irb->ecw[0] & SNS0_CMD_REJECT)) { |
| /* |
| * if the device doesn't support the SenseID |
| * command further retries wouldn't help ... |
| * NB: We don't check here for intervention required like we |
| * did before, because tape devices with no tape inserted |
| * may present this status *in conjunction with* the |
| * sense id information. So, for intervention required, |
| * we use the "whack it until it talks" strategy... |
| */ |
| CIO_MSG_EVENT(2, "SenseID : device %04x on Subchannel %04x " |
| "reports cmd reject\n", |
| cdev->private->devno, sch->irq); |
| return -EOPNOTSUPP; |
| } |
| if (irb->esw.esw0.erw.cons) { |
| CIO_MSG_EVENT(2, "SenseID : UC on dev %04x, " |
| "lpum %02X, cnt %02d, sns :" |
| " %02X%02X%02X%02X %02X%02X%02X%02X ...\n", |
| cdev->private->devno, |
| irb->esw.esw0.sublog.lpum, |
| irb->esw.esw0.erw.scnt, |
| irb->ecw[0], irb->ecw[1], |
| irb->ecw[2], irb->ecw[3], |
| irb->ecw[4], irb->ecw[5], |
| irb->ecw[6], irb->ecw[7]); |
| return -EAGAIN; |
| } |
| if (irb->scsw.cc == 3) { |
| if ((sch->orb.lpm & |
| sch->schib.pmcw.pim & sch->schib.pmcw.pam) != 0) |
| CIO_MSG_EVENT(2, "SenseID : path %02X for device %04x on" |
| " subchannel %04x is 'not operational'\n", |
| sch->orb.lpm, cdev->private->devno, |
| sch->irq); |
| return -EACCES; |
| } |
| /* Hmm, whatever happened, try again. */ |
| CIO_MSG_EVENT(2, "SenseID : start_IO() for device %04x on " |
| "subchannel %04x returns status %02X%02X\n", |
| cdev->private->devno, sch->irq, |
| irb->scsw.dstat, irb->scsw.cstat); |
| return -EAGAIN; |
| } |
| |
| /* |
| * Got interrupt for Sense ID. |
| */ |
| void |
| ccw_device_sense_id_irq(struct ccw_device *cdev, enum dev_event dev_event) |
| { |
| struct subchannel *sch; |
| struct irb *irb; |
| int ret; |
| |
| sch = to_subchannel(cdev->dev.parent); |
| irb = (struct irb *) __LC_IRB; |
| /* Retry sense id, if needed. */ |
| if (irb->scsw.stctl == |
| (SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS)) { |
| if ((irb->scsw.cc == 1) || !irb->scsw.actl) { |
| ret = __ccw_device_sense_id_start(cdev); |
| if (ret && ret != -EBUSY) |
| ccw_device_sense_id_done(cdev, ret); |
| } |
| return; |
| } |
| if (ccw_device_accumulate_and_sense(cdev, irb) != 0) |
| return; |
| ret = ccw_device_check_sense_id(cdev); |
| memset(&cdev->private->irb, 0, sizeof(struct irb)); |
| switch (ret) { |
| /* 0, -ETIME, -EOPNOTSUPP, -EAGAIN or -EACCES */ |
| case 0: /* Sense id succeeded. */ |
| case -ETIME: /* Sense id stopped by timeout. */ |
| ccw_device_sense_id_done(cdev, ret); |
| break; |
| case -EACCES: /* channel is not operational. */ |
| sch->lpm &= ~cdev->private->imask; |
| cdev->private->imask >>= 1; |
| cdev->private->iretry = 5; |
| /* fall through. */ |
| case -EAGAIN: /* try again. */ |
| ret = __ccw_device_sense_id_start(cdev); |
| if (ret == 0 || ret == -EBUSY) |
| break; |
| /* fall through. */ |
| default: /* Sense ID failed. Try asking VM. */ |
| if (MACHINE_IS_VM) { |
| VM_virtual_device_info (cdev->private->devno, |
| &cdev->private->senseid); |
| if (cdev->private->senseid.cu_type != 0xFFFF) { |
| /* Got the device information from VM. */ |
| ccw_device_sense_id_done(cdev, 0); |
| return; |
| } |
| } |
| /* |
| * If we can't couldn't identify the device type we |
| * consider the device "not operational". |
| */ |
| ccw_device_sense_id_done(cdev, -ENODEV); |
| break; |
| } |
| } |
| |
| EXPORT_SYMBOL(diag210); |