msm: 8974: rename copper to 8974
The official name for copper is MSM8974.
Switch to it.
Change-Id: Ifb241232111139912477bf7b5f2e9cf5d38d0f9e
Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-8974-gpiomux.c b/arch/arm/mach-msm/board-8974-gpiomux.c
new file mode 100644
index 0000000..6fcc779
--- /dev/null
+++ b/arch/arm/mach-msm/board-8974-gpiomux.c
@@ -0,0 +1,131 @@
+/* Copyright (c) 2012, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/gpiomux.h>
+
+#define KS8851_IRQ_GPIO 90
+
+static struct gpiomux_setting gpio_uart_config = {
+ .func = GPIOMUX_FUNC_2,
+ .drv = GPIOMUX_DRV_16MA,
+ .pull = GPIOMUX_PULL_NONE,
+ .dir = GPIOMUX_OUT_HIGH,
+};
+
+#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
+static struct gpiomux_setting gpio_eth_config = {
+ .pull = GPIOMUX_PULL_NONE,
+ .drv = GPIOMUX_DRV_8MA,
+ .func = GPIOMUX_FUNC_GPIO,
+};
+
+static struct gpiomux_setting gpio_spi_cs_config = {
+ .func = GPIOMUX_FUNC_4,
+ .drv = GPIOMUX_DRV_12MA,
+ .pull = GPIOMUX_PULL_NONE,
+};
+
+static struct gpiomux_setting gpio_spi_config = {
+ .func = GPIOMUX_FUNC_1,
+ .drv = GPIOMUX_DRV_12MA,
+ .pull = GPIOMUX_PULL_NONE,
+};
+
+static struct msm_gpiomux_config msm_eth_configs[] = {
+ {
+ .gpio = KS8851_IRQ_GPIO,
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_eth_config,
+ }
+ },
+};
+#endif
+static struct gpiomux_setting gpio_i2c_config = {
+ .func = GPIOMUX_FUNC_3,
+ .drv = GPIOMUX_DRV_8MA,
+ .pull = GPIOMUX_PULL_NONE,
+};
+
+
+static struct msm_gpiomux_config msm_blsp_configs[] __initdata = {
+#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
+ {
+ .gpio = 0, /* BLSP1 QUP SPI_DATA_MOSI */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_config,
+ },
+ },
+ {
+ .gpio = 1, /* BLSP1 QUP SPI_DATA_MISO */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_config,
+ },
+ },
+ {
+ .gpio = 3, /* BLSP1 QUP SPI_CLK */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_config,
+ },
+ },
+ {
+ .gpio = 9, /* BLSP1 QUP SPI_CS_N */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_spi_cs_config,
+ },
+ },
+#endif
+ {
+ .gpio = 83, /* BLSP11 QUP I2C_DAT */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_i2c_config,
+ },
+ },
+ {
+ .gpio = 84, /* BLSP11 QUP I2C_CLK */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_i2c_config,
+ },
+ },
+ {
+ .gpio = 45, /* BLSP8 UART TX */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_uart_config,
+ },
+ },
+ {
+ .gpio = 46, /* BLSP8 UART RX */
+ .settings = {
+ [GPIOMUX_SUSPENDED] = &gpio_uart_config,
+ },
+ },
+};
+
+void __init msm_8974_init_gpiomux(void)
+{
+ int rc;
+
+ rc = msm_gpiomux_init(NR_GPIO_IRQS);
+ if (rc) {
+ pr_err(KERN_ERR "msm_8974_init_gpiomux failed %d\n", rc);
+ return;
+ }
+
+#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
+ msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
+#endif
+ msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
+}