hwmon: Use i2c_smbus_{read,write}_word_swapped
Make use of the new i2c_smbus_{read,write}_word_swapped functions.
This makes the driver code more compact and readable. It also ensures
proper error handling.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index d46c0c7..df29a7f 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -58,10 +58,9 @@
static inline int ad7414_read(struct i2c_client *client, u8 reg)
{
- if (reg == AD7414_REG_TEMP) {
- int value = i2c_smbus_read_word_data(client, reg);
- return (value < 0) ? value : swab16(value);
- } else
+ if (reg == AD7414_REG_TEMP)
+ return i2c_smbus_read_word_swapped(client, reg);
+ else
return i2c_smbus_read_byte_data(client, reg);
}
diff --git a/drivers/hwmon/ad7418.c b/drivers/hwmon/ad7418.c
index ffc781f..8cb718c 100644
--- a/drivers/hwmon/ad7418.c
+++ b/drivers/hwmon/ad7418.c
@@ -76,20 +76,6 @@
.id_table = ad7418_id,
};
-/* All registers are word-sized, except for the configuration registers.
- * AD7418 uses a high-byte first convention. Do NOT use those functions to
- * access the configuration registers CONF and CONF2, as they are byte-sized.
- */
-static inline int ad7418_read(struct i2c_client *client, u8 reg)
-{
- return swab16(i2c_smbus_read_word_data(client, reg));
-}
-
-static inline int ad7418_write(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static void ad7418_init_client(struct i2c_client *client)
{
struct ad7418_data *data = i2c_get_clientdata(client);
@@ -128,7 +114,9 @@
udelay(30);
for (i = 0; i < 3; i++) {
- data->temp[i] = ad7418_read(client, AD7418_REG_TEMP[i]);
+ data->temp[i] =
+ i2c_smbus_read_word_swapped(client,
+ AD7418_REG_TEMP[i]);
}
for (i = 0, ch = 4; i < data->adc_max; i++, ch--) {
@@ -138,11 +126,12 @@
udelay(15);
data->in[data->adc_max - 1 - i] =
- ad7418_read(client, AD7418_REG_ADC);
+ i2c_smbus_read_word_swapped(client,
+ AD7418_REG_ADC);
}
/* restore old configuration value */
- ad7418_write(client, AD7418_REG_CONF, cfg);
+ i2c_smbus_write_word_swapped(client, AD7418_REG_CONF, cfg);
data->last_updated = jiffies;
data->valid = 1;
@@ -182,7 +171,9 @@
mutex_lock(&data->lock);
data->temp[attr->index] = LM75_TEMP_TO_REG(temp);
- ad7418_write(client, AD7418_REG_TEMP[attr->index], data->temp[attr->index]);
+ i2c_smbus_write_word_swapped(client,
+ AD7418_REG_TEMP[attr->index],
+ data->temp[attr->index]);
mutex_unlock(&data->lock);
return count;
}
diff --git a/drivers/hwmon/ads1015.c b/drivers/hwmon/ads1015.c
index e9beeda..eedca3c 100644
--- a/drivers/hwmon/ads1015.c
+++ b/drivers/hwmon/ads1015.c
@@ -59,19 +59,6 @@
struct ads1015_channel_data channel_data[ADS1015_CHANNELS];
};
-static s32 ads1015_read_reg(struct i2c_client *client, unsigned int reg)
-{
- s32 data = i2c_smbus_read_word_data(client, reg);
-
- return (data < 0) ? data : swab16(data);
-}
-
-static s32 ads1015_write_reg(struct i2c_client *client, unsigned int reg,
- u16 val)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(val));
-}
-
static int ads1015_read_value(struct i2c_client *client, unsigned int channel,
int *value)
{
@@ -87,7 +74,7 @@
mutex_lock(&data->update_lock);
/* get channel parameters */
- res = ads1015_read_reg(client, ADS1015_CONFIG);
+ res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
if (res < 0)
goto err_unlock;
config = res;
@@ -101,13 +88,13 @@
config |= (pga & 0x0007) << 9;
config |= (data_rate & 0x0007) << 5;
- res = ads1015_write_reg(client, ADS1015_CONFIG, config);
+ res = i2c_smbus_write_word_swapped(client, ADS1015_CONFIG, config);
if (res < 0)
goto err_unlock;
/* wait until conversion finished */
msleep(conversion_time_ms);
- res = ads1015_read_reg(client, ADS1015_CONFIG);
+ res = i2c_smbus_read_word_swapped(client, ADS1015_CONFIG);
if (res < 0)
goto err_unlock;
config = res;
@@ -117,7 +104,7 @@
goto err_unlock;
}
- res = ads1015_read_reg(client, ADS1015_CONVERSION);
+ res = i2c_smbus_read_word_swapped(client, ADS1015_CONVERSION);
if (res < 0)
goto err_unlock;
conversion = res;
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index c42c5a6..cfcc3b6 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -74,13 +74,6 @@
static int ads7828_probe(struct i2c_client *client,
const struct i2c_device_id *id);
-/* The ADS7828 returns the 12-bit sample in two bytes,
- these are read as a word then byte-swapped */
-static u16 ads7828_read_value(struct i2c_client *client, u8 reg)
-{
- return swab16(i2c_smbus_read_word_data(client, reg));
-}
-
static inline u8 channel_cmd_byte(int ch)
{
/* cmd byte C2,C1,C0 - see datasheet */
@@ -104,7 +97,8 @@
for (ch = 0; ch < ADS7828_NCH; ch++) {
u8 cmd = channel_cmd_byte(ch);
- data->adc_input[ch] = ads7828_read_value(client, cmd);
+ data->adc_input[ch] =
+ i2c_smbus_read_word_swapped(client, cmd);
}
data->last_updated = jiffies;
data->valid = 1;
@@ -203,7 +197,7 @@
for (ch = 0; ch < ADS7828_NCH; ch++) {
u16 in_data;
u8 cmd = channel_cmd_byte(ch);
- in_data = ads7828_read_value(client, cmd);
+ in_data = i2c_smbus_read_word_swapped(client, cmd);
if (in_data & 0xF000) {
pr_debug("%s : Doesn't look like an ads7828 device\n",
__func__);
diff --git a/drivers/hwmon/asb100.c b/drivers/hwmon/asb100.c
index c02a052..d7bd1f3 100644
--- a/drivers/hwmon/asb100.c
+++ b/drivers/hwmon/asb100.c
@@ -829,17 +829,17 @@
/* convert from ISA to LM75 I2C addresses */
switch (reg & 0xff) {
case 0x50: /* TEMP */
- res = swab16(i2c_smbus_read_word_data(cl, 0));
+ res = i2c_smbus_read_word_swapped(cl, 0);
break;
case 0x52: /* CONFIG */
res = i2c_smbus_read_byte_data(cl, 1);
break;
case 0x53: /* HYST */
- res = swab16(i2c_smbus_read_word_data(cl, 2));
+ res = i2c_smbus_read_word_swapped(cl, 2);
break;
case 0x55: /* MAX */
default:
- res = swab16(i2c_smbus_read_word_data(cl, 3));
+ res = i2c_smbus_read_word_swapped(cl, 3);
break;
}
}
@@ -877,10 +877,10 @@
i2c_smbus_write_byte_data(cl, 1, value & 0xff);
break;
case 0x53: /* HYST */
- i2c_smbus_write_word_data(cl, 2, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 2, value);
break;
case 0x55: /* MAX */
- i2c_smbus_write_word_data(cl, 3, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 3, value);
break;
}
}
diff --git a/drivers/hwmon/ds1621.c b/drivers/hwmon/ds1621.c
index e113634..ef1ac996 100644
--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -80,24 +80,6 @@
u8 conf; /* Register encoding, combined */
};
-/* Temperature registers are word-sized.
- DS1621 uses a high-byte first convention, which is exactly opposite to
- the SMBus standard. */
-static int ds1621_read_temp(struct i2c_client *client, u8 reg)
-{
- int ret;
-
- ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- return swab16(ret);
-}
-
-static int ds1621_write_temp(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static void ds1621_init_client(struct i2c_client *client)
{
u8 conf, new_conf;
@@ -136,7 +118,7 @@
data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
for (i = 0; i < ARRAY_SIZE(data->temp); i++)
- data->temp[i] = ds1621_read_temp(client,
+ data->temp[i] = i2c_smbus_read_word_swapped(client,
DS1621_REG_TEMP[i]);
/* reset alarms if necessary */
@@ -177,8 +159,8 @@
mutex_lock(&data->update_lock);
data->temp[attr->index] = val;
- ds1621_write_temp(client, DS1621_REG_TEMP[attr->index],
- data->temp[attr->index]);
+ i2c_smbus_write_word_swapped(client, DS1621_REG_TEMP[attr->index],
+ data->temp[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index 4f7c3fc..225ae4f 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -75,33 +75,13 @@
s16 temp[3]; /* Register values, word */
};
-/*
- * Temperature registers are word-sized.
- * DS620 uses a high-byte first convention, which is exactly opposite to
- * the SMBus standard.
- */
-static int ds620_read_temp(struct i2c_client *client, u8 reg)
-{
- int ret;
-
- ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- return swab16(ret);
-}
-
-static int ds620_write_temp(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static void ds620_init_client(struct i2c_client *client)
{
struct ds620_platform_data *ds620_info = client->dev.platform_data;
u16 conf, new_conf;
new_conf = conf =
- swab16(i2c_smbus_read_word_data(client, DS620_REG_CONF));
+ i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
/* switch to continuous conversion mode */
new_conf &= ~DS620_REG_CONFIG_1SHOT;
@@ -118,8 +98,7 @@
new_conf |= DS620_REG_CONFIG_R1 | DS620_REG_CONFIG_R0;
if (conf != new_conf)
- i2c_smbus_write_word_data(client, DS620_REG_CONF,
- swab16(new_conf));
+ i2c_smbus_write_word_swapped(client, DS620_REG_CONF, new_conf);
/* start conversion */
i2c_smbus_write_byte(client, DS620_COM_START);
@@ -141,8 +120,8 @@
dev_dbg(&client->dev, "Starting ds620 update\n");
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
- res = ds620_read_temp(client,
- DS620_REG_TEMP[i]);
+ res = i2c_smbus_read_word_swapped(client,
+ DS620_REG_TEMP[i]);
if (res < 0) {
ret = ERR_PTR(res);
goto abort;
@@ -191,8 +170,8 @@
mutex_lock(&data->update_lock);
data->temp[attr->index] = val;
- ds620_write_temp(client, DS620_REG_TEMP[attr->index],
- data->temp[attr->index]);
+ i2c_smbus_write_word_swapped(client, DS620_REG_TEMP[attr->index],
+ data->temp[attr->index]);
mutex_unlock(&data->update_lock);
return count;
}
@@ -210,16 +189,15 @@
return PTR_ERR(data);
/* reset alarms if necessary */
- res = i2c_smbus_read_word_data(client, DS620_REG_CONF);
+ res = i2c_smbus_read_word_swapped(client, DS620_REG_CONF);
if (res < 0)
return res;
- conf = swab16(res);
- new_conf = conf;
+ new_conf = conf = res;
new_conf &= ~attr->index;
if (conf != new_conf) {
- res = i2c_smbus_write_word_data(client, DS620_REG_CONF,
- swab16(new_conf));
+ res = i2c_smbus_write_word_swapped(client, DS620_REG_CONF,
+ new_conf);
if (res < 0)
return res;
}
diff --git a/drivers/hwmon/gl518sm.c b/drivers/hwmon/gl518sm.c
index e7ae574..a13e2da 100644
--- a/drivers/hwmon/gl518sm.c
+++ b/drivers/hwmon/gl518sm.c
@@ -591,7 +591,7 @@
static int gl518_read_value(struct i2c_client *client, u8 reg)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return swab16(i2c_smbus_read_word_data(client, reg));
+ return i2c_smbus_read_word_swapped(client, reg);
else
return i2c_smbus_read_byte_data(client, reg);
}
@@ -599,7 +599,7 @@
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
else
return i2c_smbus_write_byte_data(client, reg, value);
}
diff --git a/drivers/hwmon/gl520sm.c b/drivers/hwmon/gl520sm.c
index 131ea86..cd6085b 100644
--- a/drivers/hwmon/gl520sm.c
+++ b/drivers/hwmon/gl520sm.c
@@ -821,7 +821,7 @@
static int gl520_read_value(struct i2c_client *client, u8 reg)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return swab16(i2c_smbus_read_word_data(client, reg));
+ return i2c_smbus_read_word_swapped(client, reg);
else
return i2c_smbus_read_byte_data(client, reg);
}
@@ -829,7 +829,7 @@
static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if ((reg >= 0x07) && (reg <= 0x0c))
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
else
return i2c_smbus_write_byte_data(client, reg, value);
}
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 02cebb7..2d3d728 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -154,8 +154,6 @@
const struct i2c_device_id *id);
static int jc42_detect(struct i2c_client *client, struct i2c_board_info *info);
static int jc42_remove(struct i2c_client *client);
-static int jc42_read_value(struct i2c_client *client, u8 reg);
-static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct jc42_data *jc42_update_device(struct device *dev);
@@ -187,7 +185,7 @@
struct jc42_data *data = i2c_get_clientdata(client);
data->config |= JC42_CFG_SHUTDOWN;
- jc42_write_value(client, JC42_REG_CONFIG, data->config);
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, data->config);
return 0;
}
@@ -197,7 +195,7 @@
struct jc42_data *data = i2c_get_clientdata(client);
data->config &= ~JC42_CFG_SHUTDOWN;
- jc42_write_value(client, JC42_REG_CONFIG, data->config);
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG, data->config);
return 0;
}
@@ -315,7 +313,7 @@
return -EINVAL; \
mutex_lock(&data->update_lock); \
data->value = jc42_temp_to_reg(val, data->extended); \
- err = jc42_write_value(client, reg, data->value); \
+ err = i2c_smbus_write_word_swapped(client, reg, data->value); \
if (err < 0) \
ret = err; \
mutex_unlock(&data->update_lock); \
@@ -357,7 +355,8 @@
data->config = (data->config
& ~(JC42_CFG_HYST_MASK << JC42_CFG_HYST_SHIFT))
| (hyst << JC42_CFG_HYST_SHIFT);
- err = jc42_write_value(client, JC42_REG_CONFIG, data->config);
+ err = i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG,
+ data->config);
if (err < 0)
ret = err;
mutex_unlock(&data->update_lock);
@@ -452,10 +451,10 @@
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
- cap = jc42_read_value(new_client, JC42_REG_CAP);
- config = jc42_read_value(new_client, JC42_REG_CONFIG);
- manid = jc42_read_value(new_client, JC42_REG_MANID);
- devid = jc42_read_value(new_client, JC42_REG_DEVICEID);
+ cap = i2c_smbus_read_word_swapped(new_client, JC42_REG_CAP);
+ config = i2c_smbus_read_word_swapped(new_client, JC42_REG_CONFIG);
+ manid = i2c_smbus_read_word_swapped(new_client, JC42_REG_MANID);
+ devid = i2c_smbus_read_word_swapped(new_client, JC42_REG_DEVICEID);
if (cap < 0 || config < 0 || manid < 0 || devid < 0)
return -ENODEV;
@@ -489,14 +488,14 @@
i2c_set_clientdata(new_client, data);
mutex_init(&data->update_lock);
- cap = jc42_read_value(new_client, JC42_REG_CAP);
+ cap = i2c_smbus_read_word_swapped(new_client, JC42_REG_CAP);
if (cap < 0) {
err = -EINVAL;
goto exit_free;
}
data->extended = !!(cap & JC42_CAP_RANGE);
- config = jc42_read_value(new_client, JC42_REG_CONFIG);
+ config = i2c_smbus_read_word_swapped(new_client, JC42_REG_CONFIG);
if (config < 0) {
err = -EINVAL;
goto exit_free;
@@ -504,7 +503,8 @@
data->orig_config = config;
if (config & JC42_CFG_SHUTDOWN) {
config &= ~JC42_CFG_SHUTDOWN;
- jc42_write_value(new_client, JC42_REG_CONFIG, config);
+ i2c_smbus_write_word_swapped(new_client, JC42_REG_CONFIG,
+ config);
}
data->config = config;
@@ -535,25 +535,12 @@
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &jc42_group);
if (data->config != data->orig_config)
- jc42_write_value(client, JC42_REG_CONFIG, data->orig_config);
+ i2c_smbus_write_word_swapped(client, JC42_REG_CONFIG,
+ data->orig_config);
kfree(data);
return 0;
}
-/* All registers are word-sized. */
-static int jc42_read_value(struct i2c_client *client, u8 reg)
-{
- int ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- return swab16(ret);
-}
-
-static int jc42_write_value(struct i2c_client *client, u8 reg, u16 value)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(value));
-}
-
static struct jc42_data *jc42_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -564,28 +551,29 @@
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
- val = jc42_read_value(client, JC42_REG_TEMP);
+ val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
}
data->temp_input = val;
- val = jc42_read_value(client, JC42_REG_TEMP_CRITICAL);
+ val = i2c_smbus_read_word_swapped(client,
+ JC42_REG_TEMP_CRITICAL);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
}
data->temp_crit = val;
- val = jc42_read_value(client, JC42_REG_TEMP_LOWER);
+ val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_LOWER);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
}
data->temp_min = val;
- val = jc42_read_value(client, JC42_REG_TEMP_UPPER);
+ val = i2c_smbus_read_word_swapped(client, JC42_REG_TEMP_UPPER);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
diff --git a/drivers/hwmon/lm73.c b/drivers/hwmon/lm73.c
index 24be176..9e64d96 100644
--- a/drivers/hwmon/lm73.c
+++ b/drivers/hwmon/lm73.c
@@ -34,7 +34,7 @@
#define LM73_REG_CTRL 0x04
#define LM73_REG_ID 0x07
-#define LM73_ID 0x9001 /* or 0x190 after a swab16() */
+#define LM73_ID 0x9001 /* 0x0190, byte-swapped */
#define DRVNAME "lm73"
#define LM73_TEMP_MIN (-40)
#define LM73_TEMP_MAX 150
@@ -57,7 +57,7 @@
/* Write value */
value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
(LM73_TEMP_MAX*4)) << 5;
- i2c_smbus_write_word_data(client, attr->index, swab16(value));
+ i2c_smbus_write_word_swapped(client, attr->index, value);
return count;
}
@@ -68,8 +68,8 @@
struct i2c_client *client = to_i2c_client(dev);
/* use integer division instead of equivalent right shift to
guarantee arithmetic shift and preserve the sign */
- int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
- attr->index)))*250) / 32;
+ int temp = ((s16) (i2c_smbus_read_word_swapped(client,
+ attr->index))*250) / 32;
return sprintf(buf, "%d\n", temp);
}
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 90126a2..1888dd0 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -384,13 +384,10 @@
*/
static int lm75_read_value(struct i2c_client *client, u8 reg)
{
- int value;
-
if (reg == LM75_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
-
- value = i2c_smbus_read_word_data(client, reg);
- return (value < 0) ? value : swab16(value);
+ else
+ return i2c_smbus_read_word_swapped(client, reg);
}
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -398,7 +395,7 @@
if (reg == LM75_REG_CONF)
return i2c_smbus_write_byte_data(client, reg, value);
else
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
}
static struct lm75_data *lm75_update_device(struct device *dev)
diff --git a/drivers/hwmon/lm77.c b/drivers/hwmon/lm77.c
index b28a297..8dfc678 100644
--- a/drivers/hwmon/lm77.c
+++ b/drivers/hwmon/lm77.c
@@ -365,7 +365,7 @@
if (reg == LM77_REG_CONF)
return i2c_smbus_read_byte_data(client, reg);
else
- return swab16(i2c_smbus_read_word_data(client, reg));
+ return i2c_smbus_read_word_swapped(client, reg);
}
static int lm77_write_value(struct i2c_client *client, u8 reg, u16 value)
@@ -373,7 +373,7 @@
if (reg == LM77_REG_CONF)
return i2c_smbus_write_byte_data(client, reg, value);
else
- return i2c_smbus_write_word_data(client, reg, swab16(value));
+ return i2c_smbus_write_word_swapped(client, reg, value);
}
static void lm77_init_client(struct i2c_client *client)
diff --git a/drivers/hwmon/lm92.c b/drivers/hwmon/lm92.c
index 7c31e62..8fcbd4d4 100644
--- a/drivers/hwmon/lm92.c
+++ b/drivers/hwmon/lm92.c
@@ -117,16 +117,16 @@
if (time_after(jiffies, data->last_updated + HZ)
|| !data->valid) {
dev_dbg(&client->dev, "Updating lm92 data\n");
- data->temp1_input = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP));
- data->temp1_hyst = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_HYST));
- data->temp1_crit = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_CRIT));
- data->temp1_min = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_LOW));
- data->temp1_max = swab16(i2c_smbus_read_word_data(client,
- LM92_REG_TEMP_HIGH));
+ data->temp1_input = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP);
+ data->temp1_hyst = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_HYST);
+ data->temp1_crit = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_CRIT);
+ data->temp1_min = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_LOW);
+ data->temp1_max = i2c_smbus_read_word_swapped(client,
+ LM92_REG_TEMP_HIGH);
data->last_updated = jiffies;
data->valid = 1;
@@ -158,7 +158,7 @@
\
mutex_lock(&data->update_lock); \
data->value = TEMP_TO_REG(val); \
- i2c_smbus_write_word_data(client, reg, swab16(data->value)); \
+ i2c_smbus_write_word_swapped(client, reg, data->value); \
mutex_unlock(&data->update_lock); \
return count; \
}
@@ -194,8 +194,8 @@
mutex_lock(&data->update_lock);
data->temp1_hyst = TEMP_FROM_REG(data->temp1_crit) - val;
- i2c_smbus_write_word_data(client, LM92_REG_TEMP_HYST,
- swab16(TEMP_TO_REG(data->temp1_hyst)));
+ i2c_smbus_write_word_swapped(client, LM92_REG_TEMP_HYST,
+ TEMP_TO_REG(data->temp1_hyst));
mutex_unlock(&data->update_lock);
return count;
}
diff --git a/drivers/hwmon/max16065.c b/drivers/hwmon/max16065.c
index dd2d7b9..385886a 100644
--- a/drivers/hwmon/max16065.c
+++ b/drivers/hwmon/max16065.c
@@ -137,10 +137,10 @@
{
int rv;
- rv = i2c_smbus_read_word_data(client, reg);
+ rv = i2c_smbus_read_word_swapped(client, reg);
if (unlikely(rv < 0))
return rv;
- return ((rv & 0xff) << 2) | ((rv >> 14) & 0x03);
+ return rv >> 6;
}
static struct max16065_data *max16065_update_device(struct device *dev)
diff --git a/drivers/hwmon/sht21.c b/drivers/hwmon/sht21.c
index 1c8c981..1539878 100644
--- a/drivers/hwmon/sht21.c
+++ b/drivers/hwmon/sht21.c
@@ -83,25 +83,6 @@
}
/**
- * sht21_read_word_data() - read word from register
- * @client: I2C client device
- * @reg: I2C command byte
- *
- * Returns value, negative errno on error.
- */
-static inline int sht21_read_word_data(struct i2c_client *client, u8 reg)
-{
- int ret = i2c_smbus_read_word_data(client, reg);
- if (ret < 0)
- return ret;
- /*
- * SMBus specifies low byte first, but the SHT21 returns MSB
- * first, so we have to swab16 the values
- */
- return swab16(ret);
-}
-
-/**
* sht21_update_measurements() - get updated measurements from device
* @client: I2C client device
*
@@ -119,12 +100,13 @@
* maximum two measurements per second at 12bit accuracy shall be made.
*/
if (time_after(jiffies, sht21->last_update + HZ / 2) || !sht21->valid) {
- ret = sht21_read_word_data(client, SHT21_TRIG_T_MEASUREMENT_HM);
+ ret = i2c_smbus_read_word_swapped(client,
+ SHT21_TRIG_T_MEASUREMENT_HM);
if (ret < 0)
goto out;
sht21->temperature = sht21_temp_ticks_to_millicelsius(ret);
- ret = sht21_read_word_data(client,
- SHT21_TRIG_RH_MEASUREMENT_HM);
+ ret = i2c_smbus_read_word_swapped(client,
+ SHT21_TRIG_RH_MEASUREMENT_HM);
if (ret < 0)
goto out;
sht21->humidity = sht21_rh_ticks_to_per_cent_mille(ret);
diff --git a/drivers/hwmon/smm665.c b/drivers/hwmon/smm665.c
index 425df5b..4116381 100644
--- a/drivers/hwmon/smm665.c
+++ b/drivers/hwmon/smm665.c
@@ -214,33 +214,26 @@
*
* Neither i2c_smbus_read_byte() nor
* i2c_smbus_read_block_data() worked here,
- * so use i2c_smbus_read_word_data() instead.
+ * so use i2c_smbus_read_word_swapped() instead.
* We could also try to use i2c_master_recv(),
* but that is not always supported.
*/
- rv = i2c_smbus_read_word_data(client, 0);
+ rv = i2c_smbus_read_word_swapped(client, 0);
if (rv < 0) {
dev_dbg(&client->dev, "Failed to read ADC value: error %d", rv);
return -1;
}
/*
* Validate/verify readback adc channel (in bit 11..14).
- * High byte is in lower 8 bit of rv, so only shift by 3.
*/
- radc = (rv >> 3) & 0x0f;
+ radc = (rv >> 11) & 0x0f;
if (radc != adc) {
dev_dbg(&client->dev, "Unexpected RADC: Expected %d got %d",
adc, radc);
return -EIO;
}
- /*
- * Chip replies with H/L, while SMBus expects L/H.
- * Thus, byte order is reversed, and we have to swap
- * the result.
- */
- rv = swab16(rv) & SMM665_ADC_MASK;
- return rv;
+ return rv & SMM665_ADC_MASK;
}
static struct smm665_data *smm665_update_device(struct device *dev)
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 5bd1949..643aa8c 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -55,19 +55,6 @@
int temp[3];
};
-/* SMBus specifies low byte first, but the TMP102 returns high byte first,
- * so we have to swab16 the values */
-static inline int tmp102_read_reg(struct i2c_client *client, u8 reg)
-{
- int result = i2c_smbus_read_word_data(client, reg);
- return result < 0 ? result : swab16(result);
-}
-
-static inline int tmp102_write_reg(struct i2c_client *client, u8 reg, u16 val)
-{
- return i2c_smbus_write_word_data(client, reg, swab16(val));
-}
-
/* convert left adjusted 13-bit TMP102 register value to milliCelsius */
static inline int tmp102_reg_to_mC(s16 val)
{
@@ -94,7 +81,8 @@
if (time_after(jiffies, tmp102->last_update + HZ / 3)) {
int i;
for (i = 0; i < ARRAY_SIZE(tmp102->temp); ++i) {
- int status = tmp102_read_reg(client, tmp102_reg[i]);
+ int status = i2c_smbus_read_word_swapped(client,
+ tmp102_reg[i]);
if (status > -1)
tmp102->temp[i] = tmp102_reg_to_mC(status);
}
@@ -130,8 +118,8 @@
mutex_lock(&tmp102->lock);
tmp102->temp[sda->index] = val;
- status = tmp102_write_reg(client, tmp102_reg[sda->index],
- tmp102_mC_to_reg(val));
+ status = i2c_smbus_write_word_swapped(client, tmp102_reg[sda->index],
+ tmp102_mC_to_reg(val));
mutex_unlock(&tmp102->lock);
return status ? : count;
}
@@ -178,18 +166,19 @@
}
i2c_set_clientdata(client, tmp102);
- status = tmp102_read_reg(client, TMP102_CONF_REG);
+ status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (status < 0) {
dev_err(&client->dev, "error reading config register\n");
goto fail_free;
}
tmp102->config_orig = status;
- status = tmp102_write_reg(client, TMP102_CONF_REG, TMP102_CONFIG);
+ status = i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+ TMP102_CONFIG);
if (status < 0) {
dev_err(&client->dev, "error writing config register\n");
goto fail_restore_config;
}
- status = tmp102_read_reg(client, TMP102_CONF_REG);
+ status = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (status < 0) {
dev_err(&client->dev, "error reading config register\n");
goto fail_restore_config;
@@ -222,7 +211,8 @@
fail_remove_sysfs:
sysfs_remove_group(&client->dev.kobj, &tmp102_attr_group);
fail_restore_config:
- tmp102_write_reg(client, TMP102_CONF_REG, tmp102->config_orig);
+ i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+ tmp102->config_orig);
fail_free:
kfree(tmp102);
@@ -240,10 +230,10 @@
if (tmp102->config_orig & TMP102_CONF_SD) {
int config;
- config = tmp102_read_reg(client, TMP102_CONF_REG);
+ config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (config >= 0)
- tmp102_write_reg(client, TMP102_CONF_REG,
- config | TMP102_CONF_SD);
+ i2c_smbus_write_word_swapped(client, TMP102_CONF_REG,
+ config | TMP102_CONF_SD);
}
kfree(tmp102);
@@ -257,12 +247,12 @@
struct i2c_client *client = to_i2c_client(dev);
int config;
- config = tmp102_read_reg(client, TMP102_CONF_REG);
+ config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (config < 0)
return config;
config |= TMP102_CONF_SD;
- return tmp102_write_reg(client, TMP102_CONF_REG, config);
+ return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
}
static int tmp102_resume(struct device *dev)
@@ -270,12 +260,12 @@
struct i2c_client *client = to_i2c_client(dev);
int config;
- config = tmp102_read_reg(client, TMP102_CONF_REG);
+ config = i2c_smbus_read_word_swapped(client, TMP102_CONF_REG);
if (config < 0)
return config;
config &= ~TMP102_CONF_SD;
- return tmp102_write_reg(client, TMP102_CONF_REG, config);
+ return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
}
static const struct dev_pm_ops tmp102_dev_pm_ops = {
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index eed43a0..65b685e 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1245,17 +1245,17 @@
/* convert from ISA to LM75 I2C addresses */
switch (reg & 0xff) {
case 0x50: /* TEMP */
- res = swab16(i2c_smbus_read_word_data(cl, 0));
+ res = i2c_smbus_read_word_swapped(cl, 0);
break;
case 0x52: /* CONFIG */
res = i2c_smbus_read_byte_data(cl, 1);
break;
case 0x53: /* HYST */
- res = swab16(i2c_smbus_read_word_data(cl, 2));
+ res = i2c_smbus_read_word_swapped(cl, 2);
break;
case 0x55: /* OVER */
default:
- res = swab16(i2c_smbus_read_word_data(cl, 3));
+ res = i2c_smbus_read_word_swapped(cl, 3);
break;
}
}
@@ -1289,10 +1289,10 @@
i2c_smbus_write_byte_data(cl, 1, value & 0xff);
break;
case 0x53: /* HYST */
- i2c_smbus_write_word_data(cl, 2, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 2, value);
break;
case 0x55: /* OVER */
- i2c_smbus_write_word_data(cl, 3, swab16(value));
+ i2c_smbus_write_word_swapped(cl, 3, value);
break;
}
}