m68knommu: Coldfire QSPI platform support
Since Grant has added the coldfire-qspi driver to next-spi, here is the
platform support for the parts that have qspi hardware. This sets up
gpio to do the spi chip select using the default chip select pins; it should
be trivial for boards that require different or additional spi chip selects to
use other gpios as needed.
Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
index ed2b69b..db824a4 100644
--- a/arch/m68k/include/asm/m520xsim.h
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -113,6 +113,7 @@
#define MCF_GPIO_PAR_UART (0xA4036)
#define MCF_GPIO_PAR_FECI2C (0xA4033)
+#define MCF_GPIO_PAR_QSPI (0xA4034)
#define MCF_GPIO_PAR_FEC (0xA4038)
#define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001)
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index a34894c..e8d06b2 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -127,5 +127,10 @@
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+/*
+ * Pin Assignment
+*/
+#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C)
/****************************************************************************/
#endif /* m523xsim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
index 14bce87..79b7b40 100644
--- a/arch/m68k/include/asm/m5249sim.h
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -69,10 +69,12 @@
#define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */
#define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */
#define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */
+#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */
/*
* Define system peripheral IRQ usage.
*/
+#define MCF_IRQ_QSPI 28 /* QSPI, Level 4 */
#define MCF_IRQ_TIMER 30 /* Timer0, Level 6 */
#define MCF_IRQ_PROFILER 31 /* Timer1, Level 7 */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
index 453356d..1feb46f 100644
--- a/arch/m68k/include/asm/m527xsim.h
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -31,6 +31,7 @@
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
#define MCFINT_UART1 14 /* Interrupt number for UART1 */
#define MCFINT_UART2 15 /* Interrupt number for UART2 */
+#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
/*
@@ -120,6 +121,9 @@
#define MCFGPIO_PIN_MAX 100
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A)
+#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C)
#endif
#ifdef CONFIG_M5275
@@ -212,6 +216,8 @@
#define MCFGPIO_PIN_MAX 148
#define MCFGPIO_IRQ_MAX 8
#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE
+
+#define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E)
#endif
/*
@@ -223,6 +229,7 @@
#define MCFEPORT_EPPDR (MCF_IPSBAR + 0x130005)
+
/*
* GPIO pins setups to enable the UARTs.
*/
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
index e2ad1f4..891cbed 100644
--- a/arch/m68k/include/asm/m528xsim.h
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -29,6 +29,7 @@
#define MCFINT_VECBASE 64 /* Vector base number */
#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_QSPI 18 /* Interrupt number for QSPI */
#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */
/*
@@ -249,70 +250,4 @@
#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge
-
-/*********************************************************************
-*
-* Queued Serial Peripheral Interface (QSPI) Module
-*
-*********************************************************************/
-/* Derek - 21 Feb 2005 */
-/* change to the format used in I2C */
-/* Read/Write access macros for general use */
-#define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340
-#define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344
-#define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348
-#define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C
-#define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350
-#define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354
-#define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354
-
-/* Bit level definitions and macros */
-#define MCF5282_QSPI_QMR_MSTR (0x8000)
-#define MCF5282_QSPI_QMR_DOHIE (0x4000)
-#define MCF5282_QSPI_QMR_BITS_16 (0x0000)
-#define MCF5282_QSPI_QMR_BITS_8 (0x2000)
-#define MCF5282_QSPI_QMR_BITS_9 (0x2400)
-#define MCF5282_QSPI_QMR_BITS_10 (0x2800)
-#define MCF5282_QSPI_QMR_BITS_11 (0x2C00)
-#define MCF5282_QSPI_QMR_BITS_12 (0x3000)
-#define MCF5282_QSPI_QMR_BITS_13 (0x3400)
-#define MCF5282_QSPI_QMR_BITS_14 (0x3800)
-#define MCF5282_QSPI_QMR_BITS_15 (0x3C00)
-#define MCF5282_QSPI_QMR_CPOL (0x0200)
-#define MCF5282_QSPI_QMR_CPHA (0x0100)
-#define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QDLYR_SPE (0x80)
-#define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8)
-#define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF))
-
-#define MCF5282_QSPI_QWR_HALT (0x8000)
-#define MCF5282_QSPI_QWR_WREN (0x4000)
-#define MCF5282_QSPI_QWR_WRTO (0x2000)
-#define MCF5282_QSPI_QWR_CSIV (0x1000)
-#define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8)
-#define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4)
-#define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F))
-
-#define MCF5282_QSPI_QIR_WCEFB (0x8000)
-#define MCF5282_QSPI_QIR_ABRTB (0x4000)
-#define MCF5282_QSPI_QIR_ABRTL (0x1000)
-#define MCF5282_QSPI_QIR_WCEFE (0x0800)
-#define MCF5282_QSPI_QIR_ABRTE (0x0400)
-#define MCF5282_QSPI_QIR_SPIFE (0x0100)
-#define MCF5282_QSPI_QIR_WCEF (0x0008)
-#define MCF5282_QSPI_QIR_ABRT (0x0004)
-#define MCF5282_QSPI_QIR_SPIF (0x0001)
-
-#define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F))
-
-#define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00))
-#define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8)
-#define MCF5282_QSPI_QCR_CONT (0x8000)
-#define MCF5282_QSPI_QCR_BITSE (0x4000)
-#define MCF5282_QSPI_QCR_DT (0x2000)
-#define MCF5282_QSPI_QCR_DSCK (0x1000)
-#define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8)
-
-/****************************************************************************/
#endif /* m528xsim_h */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
index 36bf15a..c4bf1c8 100644
--- a/arch/m68k/include/asm/m532xsim.h
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -17,6 +17,7 @@
#define MCFINT_UART0 26 /* Interrupt number for UART0 */
#define MCFINT_UART1 27 /* Interrupt number for UART1 */
#define MCFINT_UART2 28 /* Interrupt number for UART2 */
+#define MCFINT_QSPI 31 /* Interrupt number for QSPI */
#define MCF_WTM_WCR MCF_REG16(0xFC098000)
diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h
new file mode 100644
index 0000000..39d90d5
--- /dev/null
+++ b/arch/m68k/include/asm/mcfqspi.h
@@ -0,0 +1,64 @@
+/*
+ * Definitions for Freescale Coldfire QSPI module
+ *
+ * Copyright 2010 Steven King <sfking@fdwdc.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+*/
+
+#ifndef mcfqspi_h
+#define mcfqspi_h
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340)
+#elif defined(CONFIG_M5249)
+#define MCFQSPI_IOBASE (MCF_MBAR + 0x300)
+#elif defined(CONFIG_M520x) || defined(CONFIG_M532x)
+#define MCFQSPI_IOBASE 0xFC058000
+#endif
+#define MCFQSPI_IOSIZE 0x40
+
+/**
+ * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
+ * @setup: setup the control; allocate gpio's, etc. May be NULL.
+ * @teardown: finish with the control; free gpio's, etc. May be NULL.
+ * @select: output the signals to select the device. Can not be NULL.
+ * @deselect: output the signals to deselect the device. Can not be NULL.
+ *
+ * The QSPI module has 4 hardware chip selects. We don't use them. Instead
+ * platforms are required to supply a mcfqspi_cs_control as a part of the
+ * platform data for each QSPI master controller. Only the select and
+ * deselect functions are required.
+*/
+struct mcfqspi_cs_control {
+ int (*setup)(struct mcfqspi_cs_control *);
+ void (*teardown)(struct mcfqspi_cs_control *);
+ void (*select)(struct mcfqspi_cs_control *, u8, bool);
+ void (*deselect)(struct mcfqspi_cs_control *, u8, bool);
+};
+
+/**
+ * struct mcfqspi_platform_data - platform data for the coldfire qspi driver
+ * @bus_num: board specific identifier for this qspi driver.
+ * @num_chipselects: number of chip selects supported by this qspi driver.
+ * @cs_control: platform dependent chip select control.
+*/
+struct mcfqspi_platform_data {
+ s16 bus_num;
+ u16 num_chipselect;
+ struct mcfqspi_cs_control *cs_control;
+};
+
+#endif /* mcfqspi_h */