ARM: s3c24xx: move special idle code to out of line
... and hook it to arm_pm_idle.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda..32a0993 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
@@ -190,8 +191,34 @@
return __raw_readl(S3C2410_GSTATUS1);
}
+static void s3c24xx_default_idle(void)
+{
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++)
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
+ arm_pm_idle = s3c24xx_default_idle;
+
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));