include/linux/usb/ch11.h - kernel/msm - Gitiles

 /*
  * This file holds Hub protocol constants and data structures that are
  * defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
  *
  * It is used/shared between the USB core, the HCDs and couple of other USB
  * drivers.
  */

 #ifndef __LINUX_CH11_H
 #define __LINUX_CH11_H

 #include <linux/types.h>	/* __u8 etc */

 /*
  * Hub request types
  */

 #define USB_RT_HUB	(USB_TYPE_CLASS | USB_RECIP_DEVICE)
 #define USB_RT_PORT	(USB_TYPE_CLASS | USB_RECIP_OTHER)

 /*
  * Hub class requests
  * See USB 2.0 spec Table 11-16
  */
 #define HUB_CLEAR_TT_BUFFER	8
 #define HUB_RESET_TT		9
 #define HUB_GET_TT_STATE	10
 #define HUB_STOP_TT		11

 /*
  * Hub class additional requests defined by USB 3.0 spec
  * See USB 3.0 spec Table 10-6
  */
 #define HUB_SET_DEPTH		12
 #define HUB_GET_PORT_ERR_COUNT	13

 /*
  * Hub Class feature numbers
  * See USB 2.0 spec Table 11-17
  */
 #define C_HUB_LOCAL_POWER	0
 #define C_HUB_OVER_CURRENT	1

 /*
  * Port feature numbers
  * See USB 2.0 spec Table 11-17
  */
 #define USB_PORT_FEAT_CONNECTION	0
 #define USB_PORT_FEAT_ENABLE		1
 #define USB_PORT_FEAT_SUSPEND		2	/* L2 suspend */
 #define USB_PORT_FEAT_OVER_CURRENT	3
 #define USB_PORT_FEAT_RESET		4
 #define USB_PORT_FEAT_L1		5	/* L1 suspend */
 #define USB_PORT_FEAT_POWER		8
 #define USB_PORT_FEAT_LOWSPEED		9	/* Should never be used */
 #define USB_PORT_FEAT_C_CONNECTION	16
 #define USB_PORT_FEAT_C_ENABLE		17
 #define USB_PORT_FEAT_C_SUSPEND		18
 #define USB_PORT_FEAT_C_OVER_CURRENT	19
 #define USB_PORT_FEAT_C_RESET		20
 #define USB_PORT_FEAT_TEST              21
 #define USB_PORT_FEAT_INDICATOR         22
 #define USB_PORT_FEAT_C_PORT_L1         23

 /*
  * Port feature selectors added by USB 3.0 spec.
  * See USB 3.0 spec Table 10-7
  */
 #define USB_PORT_FEAT_LINK_STATE		5
 #define USB_PORT_FEAT_U1_TIMEOUT		23
 #define USB_PORT_FEAT_U2_TIMEOUT		24
 #define USB_PORT_FEAT_C_PORT_LINK_STATE		25
 #define USB_PORT_FEAT_C_PORT_CONFIG_ERROR	26
 #define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
 #define USB_PORT_FEAT_BH_PORT_RESET		28
 #define USB_PORT_FEAT_C_BH_PORT_RESET		29
 #define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT	30

 /* USB 3.0 hub remote wake mask bits, see table 10-14 */
 #define USB_PORT_FEAT_REMOTE_WAKE_CONNECT	(1 << 8)
 #define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT	(1 << 9)
 #define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT	(1 << 10)

 /*
  * Hub Status and Hub Change results
  * See USB 2.0 spec Table 11-19 and Table 11-20
  */
 struct usb_port_status {
 	__le16 wPortStatus;
 	__le16 wPortChange;
 } __attribute__ ((packed));

 /*
  * wPortStatus bit field
  * See USB 2.0 spec Table 11-21
  */
 #define USB_PORT_STAT_CONNECTION	0x0001
 #define USB_PORT_STAT_ENABLE		0x0002
 #define USB_PORT_STAT_SUSPEND		0x0004
 #define USB_PORT_STAT_OVERCURRENT	0x0008
 #define USB_PORT_STAT_RESET		0x0010
 #define USB_PORT_STAT_L1		0x0020
 /* bits 6 to 7 are reserved */
 #define USB_PORT_STAT_POWER		0x0100
 #define USB_PORT_STAT_LOW_SPEED		0x0200
 #define USB_PORT_STAT_HIGH_SPEED        0x0400
 #define USB_PORT_STAT_TEST              0x0800
 #define USB_PORT_STAT_INDICATOR         0x1000
 /* bits 13 to 15 are reserved */

 /*
  * Additions to wPortStatus bit field from USB 3.0
  * See USB 3.0 spec Table 10-10
  */
 #define USB_PORT_STAT_LINK_STATE	0x01e0
 #define USB_SS_PORT_STAT_POWER		0x0200
 #define USB_SS_PORT_STAT_SPEED		0x1c00
 #define USB_PORT_STAT_SPEED_5GBPS	0x0000
 /* Valid only if port is enabled */
 /* Bits that are the same from USB 2.0 */
 #define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION |	    \
 				USB_PORT_STAT_ENABLE |	    \
 				USB_PORT_STAT_OVERCURRENT | \
 				USB_PORT_STAT_RESET)

 /*
  * Definitions for PORT_LINK_STATE values
  * (bits 5-8) in wPortStatus
  */
 #define USB_SS_PORT_LS_U0		0x0000
 #define USB_SS_PORT_LS_U1		0x0020
 #define USB_SS_PORT_LS_U2		0x0040
 #define USB_SS_PORT_LS_U3		0x0060
 #define USB_SS_PORT_LS_SS_DISABLED	0x0080
 #define USB_SS_PORT_LS_RX_DETECT	0x00a0
 #define USB_SS_PORT_LS_SS_INACTIVE	0x00c0
 #define USB_SS_PORT_LS_POLLING		0x00e0
 #define USB_SS_PORT_LS_RECOVERY		0x0100
 #define USB_SS_PORT_LS_HOT_RESET	0x0120
 #define USB_SS_PORT_LS_COMP_MOD		0x0140
 #define USB_SS_PORT_LS_LOOPBACK		0x0160

 /*
  * wPortChange bit field
  * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
  * Bits 0 to 5 shown, bits 6 to 15 are reserved
  */
 #define USB_PORT_STAT_C_CONNECTION	0x0001
 #define USB_PORT_STAT_C_ENABLE		0x0002
 #define USB_PORT_STAT_C_SUSPEND		0x0004
 #define USB_PORT_STAT_C_OVERCURRENT	0x0008
 #define USB_PORT_STAT_C_RESET		0x0010
 #define USB_PORT_STAT_C_L1		0x0020
 /*
  * USB 3.0 wPortChange bit fields
  * See USB 3.0 spec Table 10-11
  */
 #define USB_PORT_STAT_C_BH_RESET	0x0020
 #define USB_PORT_STAT_C_LINK_STATE	0x0040
 #define USB_PORT_STAT_C_CONFIG_ERROR	0x0080

 /*
  * wHubCharacteristics (masks)
  * See USB 2.0 spec Table 11-13, offset 3
  */
 #define HUB_CHAR_LPSM		0x0003 /* Logical Power Switching Mode mask */
 #define HUB_CHAR_COMMON_LPSM	0x0000 /* All ports power control at once */
 #define HUB_CHAR_INDV_PORT_LPSM	0x0001 /* per-port power control */
 #define HUB_CHAR_NO_LPSM	0x0002 /* no power switching */

 #define HUB_CHAR_COMPOUND	0x0004 /* hub is part of a compound device */

 #define HUB_CHAR_OCPM		0x0018 /* Over-Current Protection Mode mask */
 #define HUB_CHAR_COMMON_OCPM	0x0000 /* All ports Over-Current reporting */
 #define HUB_CHAR_INDV_PORT_OCPM	0x0008 /* per-port Over-current reporting */
 #define HUB_CHAR_NO_OCPM	0x0010 /* No Over-current Protection support */

 #define HUB_CHAR_TTTT		0x0060 /* TT Think Time mask */
 #define HUB_CHAR_PORTIND	0x0080 /* per-port indicators (LEDs) */

 struct usb_hub_status {
 	__le16 wHubStatus;
 	__le16 wHubChange;
 } __attribute__ ((packed));

 /*
  * Hub Status & Hub Change bit masks
  * See USB 2.0 spec Table 11-19 and Table 11-20
  * Bits 0 and 1 for wHubStatus and wHubChange
  * Bits 2 to 15 are reserved for both
  */
 #define HUB_STATUS_LOCAL_POWER	0x0001
 #define HUB_STATUS_OVERCURRENT	0x0002
 #define HUB_CHANGE_LOCAL_POWER	0x0001
 #define HUB_CHANGE_OVERCURRENT	0x0002


 /*
  * Hub descriptor
  * See USB 2.0 spec Table 11-13
  */

 #define USB_DT_HUB			(USB_TYPE_CLASS | 0x09)
 #define USB_DT_SS_HUB			(USB_TYPE_CLASS | 0x0a)
 #define USB_DT_HUB_NONVAR_SIZE		7
 #define USB_DT_SS_HUB_SIZE              12

 /*
  * Hub Device descriptor
  * USB Hub class device protocols
  */

 #define USB_HUB_PR_FS		0 /* Full speed hub */
 #define USB_HUB_PR_HS_NO_TT	0 /* Hi-speed hub without TT */
 #define USB_HUB_PR_HS_SINGLE_TT	1 /* Hi-speed hub with single TT */
 #define USB_HUB_PR_HS_MULTI_TT	2 /* Hi-speed hub with multiple TT */
 #define USB_HUB_PR_SS		3 /* Super speed hub */

 struct usb_hub_descriptor {
 	__u8  bDescLength;
 	__u8  bDescriptorType;
 	__u8  bNbrPorts;
 	__le16 wHubCharacteristics;
 	__u8  bPwrOn2PwrGood;
 	__u8  bHubContrCurrent;

 	/* 2.0 and 3.0 hubs differ here */
 	union {
 		struct {
 			/* add 1 bit for hub status change; round to bytes */
 			__u8  DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
 			__u8  PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
 		}  __attribute__ ((packed)) hs;

 		struct {
 			__u8 bHubHdrDecLat;
 			__u16 wHubDelay;
 			__u16 DeviceRemovable;
 		}  __attribute__ ((packed)) ss;
 	} u;
 } __attribute__ ((packed));

 /* port indicator status selectors, tables 11-7 and 11-25 */
 #define HUB_LED_AUTO	0
 #define HUB_LED_AMBER	1
 #define HUB_LED_GREEN	2
 #define HUB_LED_OFF	3

 enum hub_led_mode {
 	INDICATOR_AUTO = 0,
 	INDICATOR_CYCLE,
 	/* software blinks for attention:  software, hardware, reserved */
 	INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
 	INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
 	INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
 } __attribute__ ((packed));

 /* Transaction Translator Think Times, in bits */
 #define HUB_TTTT_8_BITS		0x00
 #define HUB_TTTT_16_BITS	0x20
 #define HUB_TTTT_24_BITS	0x40
 #define HUB_TTTT_32_BITS	0x60

 #endif /* __LINUX_CH11_H */
	/*
	* This file holds Hub protocol constants and data structures that are
	* defined in chapter 11 (Hub Specification) of the USB 2.0 specification.
	*
	* It is used/shared between the USB core, the HCDs and couple of other USB
	* drivers.
	*/

	#ifndef __LINUX_CH11_H
	#define __LINUX_CH11_H

	#include <linux/types.h> /* __u8 etc */

	/*
	* Hub request types
	*/

	#define USB_RT_HUB (USB_TYPE_CLASS \| USB_RECIP_DEVICE)
	#define USB_RT_PORT (USB_TYPE_CLASS \| USB_RECIP_OTHER)

	/*
	* Hub class requests
	* See USB 2.0 spec Table 11-16
	*/
	#define HUB_CLEAR_TT_BUFFER 8
	#define HUB_RESET_TT 9
	#define HUB_GET_TT_STATE 10
	#define HUB_STOP_TT 11

	/*
	* Hub class additional requests defined by USB 3.0 spec
	* See USB 3.0 spec Table 10-6
	*/
	#define HUB_SET_DEPTH 12
	#define HUB_GET_PORT_ERR_COUNT 13

	/*
	* Hub Class feature numbers
	* See USB 2.0 spec Table 11-17
	*/
	#define C_HUB_LOCAL_POWER 0
	#define C_HUB_OVER_CURRENT 1

	/*
	* Port feature numbers
	* See USB 2.0 spec Table 11-17
	*/
	#define USB_PORT_FEAT_CONNECTION 0
	#define USB_PORT_FEAT_ENABLE 1
	#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */
	#define USB_PORT_FEAT_OVER_CURRENT 3
	#define USB_PORT_FEAT_RESET 4
	#define USB_PORT_FEAT_L1 5 /* L1 suspend */
	#define USB_PORT_FEAT_POWER 8
	#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */
	#define USB_PORT_FEAT_C_CONNECTION 16
	#define USB_PORT_FEAT_C_ENABLE 17
	#define USB_PORT_FEAT_C_SUSPEND 18
	#define USB_PORT_FEAT_C_OVER_CURRENT 19
	#define USB_PORT_FEAT_C_RESET 20
	#define USB_PORT_FEAT_TEST 21
	#define USB_PORT_FEAT_INDICATOR 22
	#define USB_PORT_FEAT_C_PORT_L1 23

	/*
	* Port feature selectors added by USB 3.0 spec.
	* See USB 3.0 spec Table 10-7
	*/
	#define USB_PORT_FEAT_LINK_STATE 5
	#define USB_PORT_FEAT_U1_TIMEOUT 23
	#define USB_PORT_FEAT_U2_TIMEOUT 24
	#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
	#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
	#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
	#define USB_PORT_FEAT_BH_PORT_RESET 28
	#define USB_PORT_FEAT_C_BH_PORT_RESET 29
	#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30

	/* USB 3.0 hub remote wake mask bits, see table 10-14 */
	#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
	#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
	#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10)

	/*
	* Hub Status and Hub Change results
	* See USB 2.0 spec Table 11-19 and Table 11-20
	*/
	struct usb_port_status {
	__le16 wPortStatus;
	__le16 wPortChange;
	} __attribute__ ((packed));

	/*
	* wPortStatus bit field
	* See USB 2.0 spec Table 11-21
	*/
	#define USB_PORT_STAT_CONNECTION 0x0001
	#define USB_PORT_STAT_ENABLE 0x0002
	#define USB_PORT_STAT_SUSPEND 0x0004
	#define USB_PORT_STAT_OVERCURRENT 0x0008
	#define USB_PORT_STAT_RESET 0x0010
	#define USB_PORT_STAT_L1 0x0020
	/* bits 6 to 7 are reserved */
	#define USB_PORT_STAT_POWER 0x0100
	#define USB_PORT_STAT_LOW_SPEED 0x0200
	#define USB_PORT_STAT_HIGH_SPEED 0x0400
	#define USB_PORT_STAT_TEST 0x0800
	#define USB_PORT_STAT_INDICATOR 0x1000
	/* bits 13 to 15 are reserved */

	/*
	* Additions to wPortStatus bit field from USB 3.0
	* See USB 3.0 spec Table 10-10
	*/
	#define USB_PORT_STAT_LINK_STATE 0x01e0
	#define USB_SS_PORT_STAT_POWER 0x0200
	#define USB_SS_PORT_STAT_SPEED 0x1c00
	#define USB_PORT_STAT_SPEED_5GBPS 0x0000
	/* Valid only if port is enabled */
	/* Bits that are the same from USB 2.0 */
	#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION \| \
	USB_PORT_STAT_ENABLE \| \
	USB_PORT_STAT_OVERCURRENT \| \
	USB_PORT_STAT_RESET)

	/*
	* Definitions for PORT_LINK_STATE values
	* (bits 5-8) in wPortStatus
	*/
	#define USB_SS_PORT_LS_U0 0x0000
	#define USB_SS_PORT_LS_U1 0x0020
	#define USB_SS_PORT_LS_U2 0x0040
	#define USB_SS_PORT_LS_U3 0x0060
	#define USB_SS_PORT_LS_SS_DISABLED 0x0080
	#define USB_SS_PORT_LS_RX_DETECT 0x00a0
	#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0
	#define USB_SS_PORT_LS_POLLING 0x00e0
	#define USB_SS_PORT_LS_RECOVERY 0x0100
	#define USB_SS_PORT_LS_HOT_RESET 0x0120
	#define USB_SS_PORT_LS_COMP_MOD 0x0140
	#define USB_SS_PORT_LS_LOOPBACK 0x0160

	/*
	* wPortChange bit field
	* See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10
	* Bits 0 to 5 shown, bits 6 to 15 are reserved
	*/
	#define USB_PORT_STAT_C_CONNECTION 0x0001
	#define USB_PORT_STAT_C_ENABLE 0x0002
	#define USB_PORT_STAT_C_SUSPEND 0x0004
	#define USB_PORT_STAT_C_OVERCURRENT 0x0008
	#define USB_PORT_STAT_C_RESET 0x0010
	#define USB_PORT_STAT_C_L1 0x0020
	/*
	* USB 3.0 wPortChange bit fields
	* See USB 3.0 spec Table 10-11
	*/
	#define USB_PORT_STAT_C_BH_RESET 0x0020
	#define USB_PORT_STAT_C_LINK_STATE 0x0040
	#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080

	/*
	* wHubCharacteristics (masks)
	* See USB 2.0 spec Table 11-13, offset 3
	*/
	#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */
	#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */
	#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */
	#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */

	#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */

	#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */
	#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */
	#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */
	#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */

	#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */
	#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */

	struct usb_hub_status {
	__le16 wHubStatus;
	__le16 wHubChange;
	} __attribute__ ((packed));

	/*
	* Hub Status & Hub Change bit masks
	* See USB 2.0 spec Table 11-19 and Table 11-20
	* Bits 0 and 1 for wHubStatus and wHubChange
	* Bits 2 to 15 are reserved for both
	*/
	#define HUB_STATUS_LOCAL_POWER 0x0001
	#define HUB_STATUS_OVERCURRENT 0x0002
	#define HUB_CHANGE_LOCAL_POWER 0x0001
	#define HUB_CHANGE_OVERCURRENT 0x0002


	/*
	* Hub descriptor
	* See USB 2.0 spec Table 11-13
	*/

	#define USB_DT_HUB (USB_TYPE_CLASS \| 0x09)
	#define USB_DT_SS_HUB (USB_TYPE_CLASS \| 0x0a)
	#define USB_DT_HUB_NONVAR_SIZE 7
	#define USB_DT_SS_HUB_SIZE 12

	/*
	* Hub Device descriptor
	* USB Hub class device protocols
	*/

	#define USB_HUB_PR_FS 0 /* Full speed hub */
	#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */
	#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
	#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */
	#define USB_HUB_PR_SS 3 /* Super speed hub */

	struct usb_hub_descriptor {
	__u8 bDescLength;
	__u8 bDescriptorType;
	__u8 bNbrPorts;
	__le16 wHubCharacteristics;
	__u8 bPwrOn2PwrGood;
	__u8 bHubContrCurrent;

	/* 2.0 and 3.0 hubs differ here */
	union {
	struct {
	/* add 1 bit for hub status change; round to bytes */
	__u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
	__u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
	} __attribute__ ((packed)) hs;

	struct {
	__u8 bHubHdrDecLat;
	__u16 wHubDelay;
	__u16 DeviceRemovable;
	} __attribute__ ((packed)) ss;
	} u;
	} __attribute__ ((packed));

	/* port indicator status selectors, tables 11-7 and 11-25 */
	#define HUB_LED_AUTO 0
	#define HUB_LED_AMBER 1
	#define HUB_LED_GREEN 2
	#define HUB_LED_OFF 3

	enum hub_led_mode {
	INDICATOR_AUTO = 0,
	INDICATOR_CYCLE,
	/* software blinks for attention: software, hardware, reserved */
	INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF,
	INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF,
	INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF
	} __attribute__ ((packed));

	/* Transaction Translator Think Times, in bits */
	#define HUB_TTTT_8_BITS 0x00
	#define HUB_TTTT_16_BITS 0x20
	#define HUB_TTTT_24_BITS 0x40
	#define HUB_TTTT_32_BITS 0x60

	#endif /* __LINUX_CH11_H */