diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index 8e43759..94ade1f 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -21,6 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/seq_file.h>
+#include <linux/stat.h>
 #define _MASTER_FILE
 
 #include "global.h"
@@ -2191,79 +2192,79 @@
 module_exit(viafb_exit);
 
 #ifdef MODULE
-module_param(viafb_memsize, int, 0);
+module_param(viafb_memsize, int, S_IRUSR);
 
-module_param(viafb_mode, charp, 0);
+module_param(viafb_mode, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_mode, "Set resolution (default=640x480)");
 
-module_param(viafb_mode1, charp, 0);
+module_param(viafb_mode1, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_mode1, "Set resolution (default=640x480)");
 
-module_param(viafb_bpp, int, 0);
+module_param(viafb_bpp, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_bpp, "Set color depth (default=32bpp)");
 
-module_param(viafb_bpp1, int, 0);
+module_param(viafb_bpp1, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_bpp1, "Set color depth (default=32bpp)");
 
-module_param(viafb_refresh, int, 0);
+module_param(viafb_refresh, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_refresh,
 	"Set CRT viafb_refresh rate (default = 60)");
 
-module_param(viafb_refresh1, int, 0);
+module_param(viafb_refresh1, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_refresh1,
 	"Set CRT refresh rate (default = 60)");
 
-module_param(viafb_lcd_panel_id, int, 0);
+module_param(viafb_lcd_panel_id, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_panel_id,
 	"Set Flat Panel type(Default=1024x768)");
 
-module_param(viafb_lcd_dsp_method, int, 0);
+module_param(viafb_lcd_dsp_method, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_dsp_method,
 	"Set Flat Panel display scaling method.(Default=Expandsion)");
 
-module_param(viafb_SAMM_ON, int, 0);
+module_param(viafb_SAMM_ON, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_SAMM_ON,
 	"Turn on/off flag of SAMM(Default=OFF)");
 
-module_param(viafb_accel, int, 0);
+module_param(viafb_accel, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_accel,
 	"Set 2D Hardware Acceleration: 0 = OFF, 1 = ON (default)");
 
-module_param(viafb_active_dev, charp, 0);
+module_param(viafb_active_dev, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_active_dev, "Specify active devices.");
 
-module_param(viafb_display_hardware_layout, int, 0);
+module_param(viafb_display_hardware_layout, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_display_hardware_layout,
 	"Display Hardware Layout (LCD Only, DVI Only...,etc)");
 
-module_param(viafb_second_size, int, 0);
+module_param(viafb_second_size, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_second_size,
 	"Set secondary device memory size");
 
-module_param(viafb_dual_fb, int, 0);
+module_param(viafb_dual_fb, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_dual_fb,
 	"Turn on/off flag of dual framebuffer devices.(Default = OFF)");
 
-module_param(viafb_platform_epia_dvi, int, 0);
+module_param(viafb_platform_epia_dvi, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_platform_epia_dvi,
 	"Turn on/off flag of DVI devices on EPIA board.(Default = OFF)");
 
-module_param(viafb_device_lcd_dualedge, int, 0);
+module_param(viafb_device_lcd_dualedge, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_device_lcd_dualedge,
 	"Turn on/off flag of dual edge panel.(Default = OFF)");
 
-module_param(viafb_bus_width, int, 0);
+module_param(viafb_bus_width, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_bus_width,
 	"Set bus width of panel.(Default = 12)");
 
-module_param(viafb_lcd_mode, int, 0);
+module_param(viafb_lcd_mode, int, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_mode,
 	"Set Flat Panel mode(Default=OPENLDI)");
 
-module_param(viafb_lcd_port, charp, 0);
+module_param(viafb_lcd_port, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_lcd_port, "Specify LCD output port.");
 
-module_param(viafb_dvi_port, charp, 0);
+module_param(viafb_dvi_port, charp, S_IRUSR);
 MODULE_PARM_DESC(viafb_dvi_port, "Specify DVI output port.");
 
 MODULE_LICENSE("GPL");