| /* |
| * linux/arch/arm/plat-omap/dma.c |
| * |
| * Copyright (C) 2003 - 2008 Nokia Corporation |
| * Author: Juha Yrjölä <juha.yrjola@nokia.com> |
| * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> |
| * Graphics DMA and LCD DMA graphics tranformations |
| * by Imre Deak <imre.deak@nokia.com> |
| * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. |
| * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> |
| * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. |
| * |
| * Copyright (C) 2009 Texas Instruments |
| * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> |
| * |
| * Support functions for the OMAP internal DMA channels. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/spinlock.h> |
| #include <linux/errno.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/io.h> |
| |
| #include <asm/system.h> |
| #include <mach/hardware.h> |
| #include <mach/dma.h> |
| |
| #include <mach/tc.h> |
| |
| #undef DEBUG |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED, |
| DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED |
| }; |
| |
| enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; |
| #endif |
| |
| #define OMAP_DMA_ACTIVE 0x01 |
| #define OMAP_DMA_CCR_EN (1 << 7) |
| #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe |
| |
| #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) |
| |
| static int enable_1510_mode; |
| |
| struct omap_dma_lch { |
| int next_lch; |
| int dev_id; |
| u16 saved_csr; |
| u16 enabled_irqs; |
| const char *dev_name; |
| void (*callback)(int lch, u16 ch_status, void *data); |
| void *data; |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| /* required for Dynamic chaining */ |
| int prev_linked_ch; |
| int next_linked_ch; |
| int state; |
| int chain_id; |
| |
| int status; |
| #endif |
| long flags; |
| }; |
| |
| struct dma_link_info { |
| int *linked_dmach_q; |
| int no_of_lchs_linked; |
| |
| int q_count; |
| int q_tail; |
| int q_head; |
| |
| int chain_state; |
| int chain_mode; |
| |
| }; |
| |
| static struct dma_link_info *dma_linked_lch; |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| |
| /* Chain handling macros */ |
| #define OMAP_DMA_CHAIN_QINIT(chain_id) \ |
| do { \ |
| dma_linked_lch[chain_id].q_head = \ |
| dma_linked_lch[chain_id].q_tail = \ |
| dma_linked_lch[chain_id].q_count = 0; \ |
| } while (0) |
| #define OMAP_DMA_CHAIN_QFULL(chain_id) \ |
| (dma_linked_lch[chain_id].no_of_lchs_linked == \ |
| dma_linked_lch[chain_id].q_count) |
| #define OMAP_DMA_CHAIN_QLAST(chain_id) \ |
| do { \ |
| ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \ |
| dma_linked_lch[chain_id].q_count) \ |
| } while (0) |
| #define OMAP_DMA_CHAIN_QEMPTY(chain_id) \ |
| (0 == dma_linked_lch[chain_id].q_count) |
| #define __OMAP_DMA_CHAIN_INCQ(end) \ |
| ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked) |
| #define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \ |
| do { \ |
| __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \ |
| dma_linked_lch[chain_id].q_count--; \ |
| } while (0) |
| |
| #define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \ |
| do { \ |
| __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \ |
| dma_linked_lch[chain_id].q_count++; \ |
| } while (0) |
| #endif |
| |
| static int dma_lch_count; |
| static int dma_chan_count; |
| static int omap_dma_reserve_channels; |
| |
| static spinlock_t dma_chan_lock; |
| static struct omap_dma_lch *dma_chan; |
| static void __iomem *omap_dma_base; |
| |
| static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = { |
| INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3, |
| INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7, |
| INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10, |
| INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13, |
| INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD |
| }; |
| |
| static inline void disable_lnk(int lch); |
| static void omap_disable_channel_irq(int lch); |
| static inline void omap_enable_channel_irq(int lch); |
| |
| #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \ |
| __func__); |
| |
| #define dma_read(reg) \ |
| ({ \ |
| u32 __val; \ |
| if (cpu_class_is_omap1()) \ |
| __val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg); \ |
| else \ |
| __val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg); \ |
| __val; \ |
| }) |
| |
| #define dma_write(val, reg) \ |
| ({ \ |
| if (cpu_class_is_omap1()) \ |
| __raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \ |
| else \ |
| __raw_writel((val), omap_dma_base + OMAP_DMA4_##reg); \ |
| }) |
| |
| #ifdef CONFIG_ARCH_OMAP15XX |
| /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */ |
| int omap_dma_in_1510_mode(void) |
| { |
| return enable_1510_mode; |
| } |
| #else |
| #define omap_dma_in_1510_mode() 0 |
| #endif |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| static inline int get_gdma_dev(int req) |
| { |
| u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; |
| int shift = ((req - 1) % 5) * 6; |
| |
| return ((omap_readl(reg) >> shift) & 0x3f) + 1; |
| } |
| |
| static inline void set_gdma_dev(int req, int dev) |
| { |
| u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4; |
| int shift = ((req - 1) % 5) * 6; |
| u32 l; |
| |
| l = omap_readl(reg); |
| l &= ~(0x3f << shift); |
| l |= (dev - 1) << shift; |
| omap_writel(l, reg); |
| } |
| #else |
| #define set_gdma_dev(req, dev) do {} while (0) |
| #endif |
| |
| /* Omap1 only */ |
| static void clear_lch_regs(int lch) |
| { |
| int i; |
| void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch); |
| |
| for (i = 0; i < 0x2c; i += 2) |
| __raw_writew(0, lch_base + i); |
| } |
| |
| void omap_set_dma_priority(int lch, int dst_port, int priority) |
| { |
| unsigned long reg; |
| u32 l; |
| |
| if (cpu_class_is_omap1()) { |
| switch (dst_port) { |
| case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */ |
| reg = OMAP_TC_OCPT1_PRIOR; |
| break; |
| case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */ |
| reg = OMAP_TC_OCPT2_PRIOR; |
| break; |
| case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */ |
| reg = OMAP_TC_EMIFF_PRIOR; |
| break; |
| case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */ |
| reg = OMAP_TC_EMIFS_PRIOR; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| l = omap_readl(reg); |
| l &= ~(0xf << 8); |
| l |= (priority & 0xf) << 8; |
| omap_writel(l, reg); |
| } |
| |
| if (cpu_class_is_omap2()) { |
| u32 ccr; |
| |
| ccr = dma_read(CCR(lch)); |
| if (priority) |
| ccr |= (1 << 6); |
| else |
| ccr &= ~(1 << 6); |
| dma_write(ccr, CCR(lch)); |
| } |
| } |
| EXPORT_SYMBOL(omap_set_dma_priority); |
| |
| void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, |
| int frame_count, int sync_mode, |
| int dma_trigger, int src_or_dst_synch) |
| { |
| u32 l; |
| |
| l = dma_read(CSDP(lch)); |
| l &= ~0x03; |
| l |= data_type; |
| dma_write(l, CSDP(lch)); |
| |
| if (cpu_class_is_omap1()) { |
| u16 ccr; |
| |
| ccr = dma_read(CCR(lch)); |
| ccr &= ~(1 << 5); |
| if (sync_mode == OMAP_DMA_SYNC_FRAME) |
| ccr |= 1 << 5; |
| dma_write(ccr, CCR(lch)); |
| |
| ccr = dma_read(CCR2(lch)); |
| ccr &= ~(1 << 2); |
| if (sync_mode == OMAP_DMA_SYNC_BLOCK) |
| ccr |= 1 << 2; |
| dma_write(ccr, CCR2(lch)); |
| } |
| |
| if (cpu_class_is_omap2() && dma_trigger) { |
| u32 val; |
| |
| val = dma_read(CCR(lch)); |
| |
| /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ |
| val &= ~((3 << 19) | 0x1f); |
| val |= (dma_trigger & ~0x1f) << 14; |
| val |= dma_trigger & 0x1f; |
| |
| if (sync_mode & OMAP_DMA_SYNC_FRAME) |
| val |= 1 << 5; |
| else |
| val &= ~(1 << 5); |
| |
| if (sync_mode & OMAP_DMA_SYNC_BLOCK) |
| val |= 1 << 18; |
| else |
| val &= ~(1 << 18); |
| |
| if (src_or_dst_synch) |
| val |= 1 << 24; /* source synch */ |
| else |
| val &= ~(1 << 24); /* dest synch */ |
| |
| dma_write(val, CCR(lch)); |
| } |
| |
| dma_write(elem_count, CEN(lch)); |
| dma_write(frame_count, CFN(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_transfer_params); |
| |
| void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color) |
| { |
| BUG_ON(omap_dma_in_1510_mode()); |
| |
| if (cpu_class_is_omap1()) { |
| u16 w; |
| |
| w = dma_read(CCR2(lch)); |
| w &= ~0x03; |
| |
| switch (mode) { |
| case OMAP_DMA_CONSTANT_FILL: |
| w |= 0x01; |
| break; |
| case OMAP_DMA_TRANSPARENT_COPY: |
| w |= 0x02; |
| break; |
| case OMAP_DMA_COLOR_DIS: |
| break; |
| default: |
| BUG(); |
| } |
| dma_write(w, CCR2(lch)); |
| |
| w = dma_read(LCH_CTRL(lch)); |
| w &= ~0x0f; |
| /* Default is channel type 2D */ |
| if (mode) { |
| dma_write((u16)color, COLOR_L(lch)); |
| dma_write((u16)(color >> 16), COLOR_U(lch)); |
| w |= 1; /* Channel type G */ |
| } |
| dma_write(w, LCH_CTRL(lch)); |
| } |
| |
| if (cpu_class_is_omap2()) { |
| u32 val; |
| |
| val = dma_read(CCR(lch)); |
| val &= ~((1 << 17) | (1 << 16)); |
| |
| switch (mode) { |
| case OMAP_DMA_CONSTANT_FILL: |
| val |= 1 << 16; |
| break; |
| case OMAP_DMA_TRANSPARENT_COPY: |
| val |= 1 << 17; |
| break; |
| case OMAP_DMA_COLOR_DIS: |
| break; |
| default: |
| BUG(); |
| } |
| dma_write(val, CCR(lch)); |
| |
| color &= 0xffffff; |
| dma_write(color, COLOR(lch)); |
| } |
| } |
| EXPORT_SYMBOL(omap_set_dma_color_mode); |
| |
| void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode) |
| { |
| if (cpu_class_is_omap2()) { |
| u32 csdp; |
| |
| csdp = dma_read(CSDP(lch)); |
| csdp &= ~(0x3 << 16); |
| csdp |= (mode << 16); |
| dma_write(csdp, CSDP(lch)); |
| } |
| } |
| EXPORT_SYMBOL(omap_set_dma_write_mode); |
| |
| void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode) |
| { |
| if (cpu_class_is_omap1() && !cpu_is_omap15xx()) { |
| u32 l; |
| |
| l = dma_read(LCH_CTRL(lch)); |
| l &= ~0x7; |
| l |= mode; |
| dma_write(l, LCH_CTRL(lch)); |
| } |
| } |
| EXPORT_SYMBOL(omap_set_dma_channel_mode); |
| |
| /* Note that src_port is only for omap1 */ |
| void omap_set_dma_src_params(int lch, int src_port, int src_amode, |
| unsigned long src_start, |
| int src_ei, int src_fi) |
| { |
| u32 l; |
| |
| if (cpu_class_is_omap1()) { |
| u16 w; |
| |
| w = dma_read(CSDP(lch)); |
| w &= ~(0x1f << 2); |
| w |= src_port << 2; |
| dma_write(w, CSDP(lch)); |
| } |
| |
| l = dma_read(CCR(lch)); |
| l &= ~(0x03 << 12); |
| l |= src_amode << 12; |
| dma_write(l, CCR(lch)); |
| |
| if (cpu_class_is_omap1()) { |
| dma_write(src_start >> 16, CSSA_U(lch)); |
| dma_write((u16)src_start, CSSA_L(lch)); |
| } |
| |
| if (cpu_class_is_omap2()) |
| dma_write(src_start, CSSA(lch)); |
| |
| dma_write(src_ei, CSEI(lch)); |
| dma_write(src_fi, CSFI(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_params); |
| |
| void omap_set_dma_params(int lch, struct omap_dma_channel_params *params) |
| { |
| omap_set_dma_transfer_params(lch, params->data_type, |
| params->elem_count, params->frame_count, |
| params->sync_mode, params->trigger, |
| params->src_or_dst_synch); |
| omap_set_dma_src_params(lch, params->src_port, |
| params->src_amode, params->src_start, |
| params->src_ei, params->src_fi); |
| |
| omap_set_dma_dest_params(lch, params->dst_port, |
| params->dst_amode, params->dst_start, |
| params->dst_ei, params->dst_fi); |
| if (params->read_prio || params->write_prio) |
| omap_dma_set_prio_lch(lch, params->read_prio, |
| params->write_prio); |
| } |
| EXPORT_SYMBOL(omap_set_dma_params); |
| |
| void omap_set_dma_src_index(int lch, int eidx, int fidx) |
| { |
| if (cpu_class_is_omap2()) |
| return; |
| |
| dma_write(eidx, CSEI(lch)); |
| dma_write(fidx, CSFI(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_index); |
| |
| void omap_set_dma_src_data_pack(int lch, int enable) |
| { |
| u32 l; |
| |
| l = dma_read(CSDP(lch)); |
| l &= ~(1 << 6); |
| if (enable) |
| l |= (1 << 6); |
| dma_write(l, CSDP(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_data_pack); |
| |
| void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) |
| { |
| unsigned int burst = 0; |
| u32 l; |
| |
| l = dma_read(CSDP(lch)); |
| l &= ~(0x03 << 7); |
| |
| switch (burst_mode) { |
| case OMAP_DMA_DATA_BURST_DIS: |
| break; |
| case OMAP_DMA_DATA_BURST_4: |
| if (cpu_class_is_omap2()) |
| burst = 0x1; |
| else |
| burst = 0x2; |
| break; |
| case OMAP_DMA_DATA_BURST_8: |
| if (cpu_class_is_omap2()) { |
| burst = 0x2; |
| break; |
| } |
| /* not supported by current hardware on OMAP1 |
| * w |= (0x03 << 7); |
| * fall through |
| */ |
| case OMAP_DMA_DATA_BURST_16: |
| if (cpu_class_is_omap2()) { |
| burst = 0x3; |
| break; |
| } |
| /* OMAP1 don't support burst 16 |
| * fall through |
| */ |
| default: |
| BUG(); |
| } |
| |
| l |= (burst << 7); |
| dma_write(l, CSDP(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_src_burst_mode); |
| |
| /* Note that dest_port is only for OMAP1 */ |
| void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode, |
| unsigned long dest_start, |
| int dst_ei, int dst_fi) |
| { |
| u32 l; |
| |
| if (cpu_class_is_omap1()) { |
| l = dma_read(CSDP(lch)); |
| l &= ~(0x1f << 9); |
| l |= dest_port << 9; |
| dma_write(l, CSDP(lch)); |
| } |
| |
| l = dma_read(CCR(lch)); |
| l &= ~(0x03 << 14); |
| l |= dest_amode << 14; |
| dma_write(l, CCR(lch)); |
| |
| if (cpu_class_is_omap1()) { |
| dma_write(dest_start >> 16, CDSA_U(lch)); |
| dma_write(dest_start, CDSA_L(lch)); |
| } |
| |
| if (cpu_class_is_omap2()) |
| dma_write(dest_start, CDSA(lch)); |
| |
| dma_write(dst_ei, CDEI(lch)); |
| dma_write(dst_fi, CDFI(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_params); |
| |
| void omap_set_dma_dest_index(int lch, int eidx, int fidx) |
| { |
| if (cpu_class_is_omap2()) |
| return; |
| |
| dma_write(eidx, CDEI(lch)); |
| dma_write(fidx, CDFI(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_index); |
| |
| void omap_set_dma_dest_data_pack(int lch, int enable) |
| { |
| u32 l; |
| |
| l = dma_read(CSDP(lch)); |
| l &= ~(1 << 13); |
| if (enable) |
| l |= 1 << 13; |
| dma_write(l, CSDP(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_data_pack); |
| |
| void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) |
| { |
| unsigned int burst = 0; |
| u32 l; |
| |
| l = dma_read(CSDP(lch)); |
| l &= ~(0x03 << 14); |
| |
| switch (burst_mode) { |
| case OMAP_DMA_DATA_BURST_DIS: |
| break; |
| case OMAP_DMA_DATA_BURST_4: |
| if (cpu_class_is_omap2()) |
| burst = 0x1; |
| else |
| burst = 0x2; |
| break; |
| case OMAP_DMA_DATA_BURST_8: |
| if (cpu_class_is_omap2()) |
| burst = 0x2; |
| else |
| burst = 0x3; |
| break; |
| case OMAP_DMA_DATA_BURST_16: |
| if (cpu_class_is_omap2()) { |
| burst = 0x3; |
| break; |
| } |
| /* OMAP1 don't support burst 16 |
| * fall through |
| */ |
| default: |
| printk(KERN_ERR "Invalid DMA burst mode\n"); |
| BUG(); |
| return; |
| } |
| l |= (burst << 14); |
| dma_write(l, CSDP(lch)); |
| } |
| EXPORT_SYMBOL(omap_set_dma_dest_burst_mode); |
| |
| static inline void omap_enable_channel_irq(int lch) |
| { |
| u32 status; |
| |
| /* Clear CSR */ |
| if (cpu_class_is_omap1()) |
| status = dma_read(CSR(lch)); |
| else if (cpu_class_is_omap2()) |
| dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch)); |
| |
| /* Enable some nice interrupts. */ |
| dma_write(dma_chan[lch].enabled_irqs, CICR(lch)); |
| } |
| |
| static void omap_disable_channel_irq(int lch) |
| { |
| if (cpu_class_is_omap2()) |
| dma_write(0, CICR(lch)); |
| } |
| |
| void omap_enable_dma_irq(int lch, u16 bits) |
| { |
| dma_chan[lch].enabled_irqs |= bits; |
| } |
| EXPORT_SYMBOL(omap_enable_dma_irq); |
| |
| void omap_disable_dma_irq(int lch, u16 bits) |
| { |
| dma_chan[lch].enabled_irqs &= ~bits; |
| } |
| EXPORT_SYMBOL(omap_disable_dma_irq); |
| |
| static inline void enable_lnk(int lch) |
| { |
| u32 l; |
| |
| l = dma_read(CLNK_CTRL(lch)); |
| |
| if (cpu_class_is_omap1()) |
| l &= ~(1 << 14); |
| |
| /* Set the ENABLE_LNK bits */ |
| if (dma_chan[lch].next_lch != -1) |
| l = dma_chan[lch].next_lch | (1 << 15); |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| if (cpu_class_is_omap2()) |
| if (dma_chan[lch].next_linked_ch != -1) |
| l = dma_chan[lch].next_linked_ch | (1 << 15); |
| #endif |
| |
| dma_write(l, CLNK_CTRL(lch)); |
| } |
| |
| static inline void disable_lnk(int lch) |
| { |
| u32 l; |
| |
| l = dma_read(CLNK_CTRL(lch)); |
| |
| /* Disable interrupts */ |
| if (cpu_class_is_omap1()) { |
| dma_write(0, CICR(lch)); |
| /* Set the STOP_LNK bit */ |
| l |= 1 << 14; |
| } |
| |
| if (cpu_class_is_omap2()) { |
| omap_disable_channel_irq(lch); |
| /* Clear the ENABLE_LNK bit */ |
| l &= ~(1 << 15); |
| } |
| |
| dma_write(l, CLNK_CTRL(lch)); |
| dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; |
| } |
| |
| static inline void omap2_enable_irq_lch(int lch) |
| { |
| u32 val; |
| |
| if (!cpu_class_is_omap2()) |
| return; |
| |
| val = dma_read(IRQENABLE_L0); |
| val |= 1 << lch; |
| dma_write(val, IRQENABLE_L0); |
| } |
| |
| int omap_request_dma(int dev_id, const char *dev_name, |
| void (*callback)(int lch, u16 ch_status, void *data), |
| void *data, int *dma_ch_out) |
| { |
| int ch, free_ch = -1; |
| unsigned long flags; |
| struct omap_dma_lch *chan; |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| for (ch = 0; ch < dma_chan_count; ch++) { |
| if (free_ch == -1 && dma_chan[ch].dev_id == -1) { |
| free_ch = ch; |
| if (dev_id == 0) |
| break; |
| } |
| } |
| if (free_ch == -1) { |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| return -EBUSY; |
| } |
| chan = dma_chan + free_ch; |
| chan->dev_id = dev_id; |
| |
| if (cpu_class_is_omap1()) |
| clear_lch_regs(free_ch); |
| |
| if (cpu_class_is_omap2()) |
| omap_clear_dma(free_ch); |
| |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| |
| chan->dev_name = dev_name; |
| chan->callback = callback; |
| chan->data = data; |
| chan->flags = 0; |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| if (cpu_class_is_omap2()) { |
| chan->chain_id = -1; |
| chan->next_linked_ch = -1; |
| } |
| #endif |
| |
| chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ; |
| |
| if (cpu_class_is_omap1()) |
| chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ; |
| else if (cpu_class_is_omap2()) |
| chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ | |
| OMAP2_DMA_TRANS_ERR_IRQ; |
| |
| if (cpu_is_omap16xx()) { |
| /* If the sync device is set, configure it dynamically. */ |
| if (dev_id != 0) { |
| set_gdma_dev(free_ch + 1, dev_id); |
| dev_id = free_ch + 1; |
| } |
| /* |
| * Disable the 1510 compatibility mode and set the sync device |
| * id. |
| */ |
| dma_write(dev_id | (1 << 10), CCR(free_ch)); |
| } else if (cpu_is_omap7xx() || cpu_is_omap15xx()) { |
| dma_write(dev_id, CCR(free_ch)); |
| } |
| |
| if (cpu_class_is_omap2()) { |
| omap2_enable_irq_lch(free_ch); |
| omap_enable_channel_irq(free_ch); |
| /* Clear the CSR register and IRQ status register */ |
| dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch)); |
| dma_write(1 << free_ch, IRQSTATUS_L0); |
| } |
| |
| *dma_ch_out = free_ch; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_request_dma); |
| |
| void omap_free_dma(int lch) |
| { |
| unsigned long flags; |
| |
| if (dma_chan[lch].dev_id == -1) { |
| pr_err("omap_dma: trying to free unallocated DMA channel %d\n", |
| lch); |
| return; |
| } |
| |
| if (cpu_class_is_omap1()) { |
| /* Disable all DMA interrupts for the channel. */ |
| dma_write(0, CICR(lch)); |
| /* Make sure the DMA transfer is stopped. */ |
| dma_write(0, CCR(lch)); |
| } |
| |
| if (cpu_class_is_omap2()) { |
| u32 val; |
| /* Disable interrupts */ |
| val = dma_read(IRQENABLE_L0); |
| val &= ~(1 << lch); |
| dma_write(val, IRQENABLE_L0); |
| |
| /* Clear the CSR register and IRQ status register */ |
| dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch)); |
| dma_write(1 << lch, IRQSTATUS_L0); |
| |
| /* Disable all DMA interrupts for the channel. */ |
| dma_write(0, CICR(lch)); |
| |
| /* Make sure the DMA transfer is stopped. */ |
| dma_write(0, CCR(lch)); |
| omap_clear_dma(lch); |
| } |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| dma_chan[lch].dev_id = -1; |
| dma_chan[lch].next_lch = -1; |
| dma_chan[lch].callback = NULL; |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| } |
| EXPORT_SYMBOL(omap_free_dma); |
| |
| /** |
| * @brief omap_dma_set_global_params : Set global priority settings for dma |
| * |
| * @param arb_rate |
| * @param max_fifo_depth |
| * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM |
| * DMA_THREAD_RESERVE_ONET |
| * DMA_THREAD_RESERVE_TWOT |
| * DMA_THREAD_RESERVE_THREET |
| */ |
| void |
| omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams) |
| { |
| u32 reg; |
| |
| if (!cpu_class_is_omap2()) { |
| printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__); |
| return; |
| } |
| |
| if (arb_rate == 0) |
| arb_rate = 1; |
| |
| reg = (arb_rate & 0xff) << 16; |
| reg |= (0xff & max_fifo_depth); |
| |
| dma_write(reg, GCR); |
| } |
| EXPORT_SYMBOL(omap_dma_set_global_params); |
| |
| /** |
| * @brief omap_dma_set_prio_lch : Set channel wise priority settings |
| * |
| * @param lch |
| * @param read_prio - Read priority |
| * @param write_prio - Write priority |
| * Both of the above can be set with one of the following values : |
| * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW |
| */ |
| int |
| omap_dma_set_prio_lch(int lch, unsigned char read_prio, |
| unsigned char write_prio) |
| { |
| u32 l; |
| |
| if (unlikely((lch < 0 || lch >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid channel id\n"); |
| return -EINVAL; |
| } |
| l = dma_read(CCR(lch)); |
| l &= ~((1 << 6) | (1 << 26)); |
| if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) |
| l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26); |
| else |
| l |= ((read_prio & 0x1) << 6); |
| |
| dma_write(l, CCR(lch)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_dma_set_prio_lch); |
| |
| /* |
| * Clears any DMA state so the DMA engine is ready to restart with new buffers |
| * through omap_start_dma(). Any buffers in flight are discarded. |
| */ |
| void omap_clear_dma(int lch) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| |
| if (cpu_class_is_omap1()) { |
| u32 l; |
| |
| l = dma_read(CCR(lch)); |
| l &= ~OMAP_DMA_CCR_EN; |
| dma_write(l, CCR(lch)); |
| |
| /* Clear pending interrupts */ |
| l = dma_read(CSR(lch)); |
| } |
| |
| if (cpu_class_is_omap2()) { |
| int i; |
| void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch); |
| for (i = 0; i < 0x44; i += 4) |
| __raw_writel(0, lch_base + i); |
| } |
| |
| local_irq_restore(flags); |
| } |
| EXPORT_SYMBOL(omap_clear_dma); |
| |
| void omap_start_dma(int lch) |
| { |
| u32 l; |
| |
| if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { |
| int next_lch, cur_lch; |
| char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; |
| |
| dma_chan_link_map[lch] = 1; |
| /* Set the link register of the first channel */ |
| enable_lnk(lch); |
| |
| memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); |
| cur_lch = dma_chan[lch].next_lch; |
| do { |
| next_lch = dma_chan[cur_lch].next_lch; |
| |
| /* The loop case: we've been here already */ |
| if (dma_chan_link_map[cur_lch]) |
| break; |
| /* Mark the current channel */ |
| dma_chan_link_map[cur_lch] = 1; |
| |
| enable_lnk(cur_lch); |
| omap_enable_channel_irq(cur_lch); |
| |
| cur_lch = next_lch; |
| } while (next_lch != -1); |
| } else if (cpu_is_omap242x() || |
| (cpu_is_omap243x() && omap_type() <= OMAP2430_REV_ES1_0)) { |
| |
| /* Errata: Need to write lch even if not using chaining */ |
| dma_write(lch, CLNK_CTRL(lch)); |
| } |
| |
| omap_enable_channel_irq(lch); |
| |
| l = dma_read(CCR(lch)); |
| |
| /* |
| * Errata: On ES2.0 BUFFERING disable must be set. |
| * This will always fail on ES1.0 |
| */ |
| if (cpu_is_omap24xx()) |
| l |= OMAP_DMA_CCR_EN; |
| |
| l |= OMAP_DMA_CCR_EN; |
| dma_write(l, CCR(lch)); |
| |
| dma_chan[lch].flags |= OMAP_DMA_ACTIVE; |
| } |
| EXPORT_SYMBOL(omap_start_dma); |
| |
| void omap_stop_dma(int lch) |
| { |
| u32 l; |
| |
| if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { |
| int next_lch, cur_lch = lch; |
| char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; |
| |
| memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map)); |
| do { |
| /* The loop case: we've been here already */ |
| if (dma_chan_link_map[cur_lch]) |
| break; |
| /* Mark the current channel */ |
| dma_chan_link_map[cur_lch] = 1; |
| |
| disable_lnk(cur_lch); |
| |
| next_lch = dma_chan[cur_lch].next_lch; |
| cur_lch = next_lch; |
| } while (next_lch != -1); |
| |
| return; |
| } |
| |
| /* Disable all interrupts on the channel */ |
| if (cpu_class_is_omap1()) |
| dma_write(0, CICR(lch)); |
| |
| l = dma_read(CCR(lch)); |
| l &= ~OMAP_DMA_CCR_EN; |
| dma_write(l, CCR(lch)); |
| |
| dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; |
| } |
| EXPORT_SYMBOL(omap_stop_dma); |
| |
| /* |
| * Allows changing the DMA callback function or data. This may be needed if |
| * the driver shares a single DMA channel for multiple dma triggers. |
| */ |
| int omap_set_dma_callback(int lch, |
| void (*callback)(int lch, u16 ch_status, void *data), |
| void *data) |
| { |
| unsigned long flags; |
| |
| if (lch < 0) |
| return -ENODEV; |
| |
| spin_lock_irqsave(&dma_chan_lock, flags); |
| if (dma_chan[lch].dev_id == -1) { |
| printk(KERN_ERR "DMA callback for not set for free channel\n"); |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| return -EINVAL; |
| } |
| dma_chan[lch].callback = callback; |
| dma_chan[lch].data = data; |
| spin_unlock_irqrestore(&dma_chan_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_set_dma_callback); |
| |
| /* |
| * Returns current physical source address for the given DMA channel. |
| * If the channel is running the caller must disable interrupts prior calling |
| * this function and process the returned value before re-enabling interrupt to |
| * prevent races with the interrupt handler. Note that in continuous mode there |
| * is a chance for CSSA_L register overflow inbetween the two reads resulting |
| * in incorrect return value. |
| */ |
| dma_addr_t omap_get_dma_src_pos(int lch) |
| { |
| dma_addr_t offset = 0; |
| |
| if (cpu_is_omap15xx()) |
| offset = dma_read(CPC(lch)); |
| else |
| offset = dma_read(CSAC(lch)); |
| |
| /* |
| * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is |
| * read before the DMA controller finished disabling the channel. |
| */ |
| if (!cpu_is_omap15xx() && offset == 0) |
| offset = dma_read(CSAC(lch)); |
| |
| if (cpu_class_is_omap1()) |
| offset |= (dma_read(CSSA_U(lch)) << 16); |
| |
| return offset; |
| } |
| EXPORT_SYMBOL(omap_get_dma_src_pos); |
| |
| /* |
| * Returns current physical destination address for the given DMA channel. |
| * If the channel is running the caller must disable interrupts prior calling |
| * this function and process the returned value before re-enabling interrupt to |
| * prevent races with the interrupt handler. Note that in continuous mode there |
| * is a chance for CDSA_L register overflow inbetween the two reads resulting |
| * in incorrect return value. |
| */ |
| dma_addr_t omap_get_dma_dst_pos(int lch) |
| { |
| dma_addr_t offset = 0; |
| |
| if (cpu_is_omap15xx()) |
| offset = dma_read(CPC(lch)); |
| else |
| offset = dma_read(CDAC(lch)); |
| |
| /* |
| * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is |
| * read before the DMA controller finished disabling the channel. |
| */ |
| if (!cpu_is_omap15xx() && offset == 0) |
| offset = dma_read(CDAC(lch)); |
| |
| if (cpu_class_is_omap1()) |
| offset |= (dma_read(CDSA_U(lch)) << 16); |
| |
| return offset; |
| } |
| EXPORT_SYMBOL(omap_get_dma_dst_pos); |
| |
| int omap_get_dma_active_status(int lch) |
| { |
| return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0; |
| } |
| EXPORT_SYMBOL(omap_get_dma_active_status); |
| |
| int omap_dma_running(void) |
| { |
| int lch; |
| |
| /* Check if LCD DMA is running */ |
| if (cpu_is_omap16xx()) |
| if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) |
| return 1; |
| |
| for (lch = 0; lch < dma_chan_count; lch++) |
| if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * lch_queue DMA will start right after lch_head one is finished. |
| * For this DMA link to start, you still need to start (see omap_start_dma) |
| * the first one. That will fire up the entire queue. |
| */ |
| void omap_dma_link_lch(int lch_head, int lch_queue) |
| { |
| if (omap_dma_in_1510_mode()) { |
| printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); |
| BUG(); |
| return; |
| } |
| |
| if ((dma_chan[lch_head].dev_id == -1) || |
| (dma_chan[lch_queue].dev_id == -1)) { |
| printk(KERN_ERR "omap_dma: trying to link " |
| "non requested channels\n"); |
| dump_stack(); |
| } |
| |
| dma_chan[lch_head].next_lch = lch_queue; |
| } |
| EXPORT_SYMBOL(omap_dma_link_lch); |
| |
| /* |
| * Once the DMA queue is stopped, we can destroy it. |
| */ |
| void omap_dma_unlink_lch(int lch_head, int lch_queue) |
| { |
| if (omap_dma_in_1510_mode()) { |
| printk(KERN_ERR "DMA linking is not supported in 1510 mode\n"); |
| BUG(); |
| return; |
| } |
| |
| if (dma_chan[lch_head].next_lch != lch_queue || |
| dma_chan[lch_head].next_lch == -1) { |
| printk(KERN_ERR "omap_dma: trying to unlink " |
| "non linked channels\n"); |
| dump_stack(); |
| } |
| |
| if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) || |
| (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) { |
| printk(KERN_ERR "omap_dma: You need to stop the DMA channels " |
| "before unlinking\n"); |
| dump_stack(); |
| } |
| |
| dma_chan[lch_head].next_lch = -1; |
| } |
| EXPORT_SYMBOL(omap_dma_unlink_lch); |
| |
| /*----------------------------------------------------------------------------*/ |
| |
| #ifndef CONFIG_ARCH_OMAP1 |
| /* Create chain of DMA channesls */ |
| static void create_dma_lch_chain(int lch_head, int lch_queue) |
| { |
| u32 l; |
| |
| /* Check if this is the first link in chain */ |
| if (dma_chan[lch_head].next_linked_ch == -1) { |
| dma_chan[lch_head].next_linked_ch = lch_queue; |
| dma_chan[lch_head].prev_linked_ch = lch_queue; |
| dma_chan[lch_queue].next_linked_ch = lch_head; |
| dma_chan[lch_queue].prev_linked_ch = lch_head; |
| } |
| |
| /* a link exists, link the new channel in circular chain */ |
| else { |
| dma_chan[lch_queue].next_linked_ch = |
| dma_chan[lch_head].next_linked_ch; |
| dma_chan[lch_queue].prev_linked_ch = lch_head; |
| dma_chan[lch_head].next_linked_ch = lch_queue; |
| dma_chan[dma_chan[lch_queue].next_linked_ch].prev_linked_ch = |
| lch_queue; |
| } |
| |
| l = dma_read(CLNK_CTRL(lch_head)); |
| l &= ~(0x1f); |
| l |= lch_queue; |
| dma_write(l, CLNK_CTRL(lch_head)); |
| |
| l = dma_read(CLNK_CTRL(lch_queue)); |
| l &= ~(0x1f); |
| l |= (dma_chan[lch_queue].next_linked_ch); |
| dma_write(l, CLNK_CTRL(lch_queue)); |
| } |
| |
| /** |
| * @brief omap_request_dma_chain : Request a chain of DMA channels |
| * |
| * @param dev_id - Device id using the dma channel |
| * @param dev_name - Device name |
| * @param callback - Call back function |
| * @chain_id - |
| * @no_of_chans - Number of channels requested |
| * @chain_mode - Dynamic or static chaining : OMAP_DMA_STATIC_CHAIN |
| * OMAP_DMA_DYNAMIC_CHAIN |
| * @params - Channel parameters |
| * |
| * @return - Succes : 0 |
| * Failure: -EINVAL/-ENOMEM |
| */ |
| int omap_request_dma_chain(int dev_id, const char *dev_name, |
| void (*callback) (int lch, u16 ch_status, |
| void *data), |
| int *chain_id, int no_of_chans, int chain_mode, |
| struct omap_dma_channel_params params) |
| { |
| int *channels; |
| int i, err; |
| |
| /* Is the chain mode valid ? */ |
| if (chain_mode != OMAP_DMA_STATIC_CHAIN |
| && chain_mode != OMAP_DMA_DYNAMIC_CHAIN) { |
| printk(KERN_ERR "Invalid chain mode requested\n"); |
| return -EINVAL; |
| } |
| |
| if (unlikely((no_of_chans < 1 |
| || no_of_chans > dma_lch_count))) { |
| printk(KERN_ERR "Invalid Number of channels requested\n"); |
| return -EINVAL; |
| } |
| |
| /* Allocate a queue to maintain the status of the channels |
| * in the chain */ |
| channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL); |
| if (channels == NULL) { |
| printk(KERN_ERR "omap_dma: No memory for channel queue\n"); |
| return -ENOMEM; |
| } |
| |
| /* request and reserve DMA channels for the chain */ |
| for (i = 0; i < no_of_chans; i++) { |
| err = omap_request_dma(dev_id, dev_name, |
| callback, NULL, &channels[i]); |
| if (err < 0) { |
| int j; |
| for (j = 0; j < i; j++) |
| omap_free_dma(channels[j]); |
| kfree(channels); |
| printk(KERN_ERR "omap_dma: Request failed %d\n", err); |
| return err; |
| } |
| dma_chan[channels[i]].prev_linked_ch = -1; |
| dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; |
| |
| /* |
| * Allowing client drivers to set common parameters now, |
| * so that later only relevant (src_start, dest_start |
| * and element count) can be set |
| */ |
| omap_set_dma_params(channels[i], ¶ms); |
| } |
| |
| *chain_id = channels[0]; |
| dma_linked_lch[*chain_id].linked_dmach_q = channels; |
| dma_linked_lch[*chain_id].chain_mode = chain_mode; |
| dma_linked_lch[*chain_id].chain_state = DMA_CHAIN_NOTSTARTED; |
| dma_linked_lch[*chain_id].no_of_lchs_linked = no_of_chans; |
| |
| for (i = 0; i < no_of_chans; i++) |
| dma_chan[channels[i]].chain_id = *chain_id; |
| |
| /* Reset the Queue pointers */ |
| OMAP_DMA_CHAIN_QINIT(*chain_id); |
| |
| /* Set up the chain */ |
| if (no_of_chans == 1) |
| create_dma_lch_chain(channels[0], channels[0]); |
| else { |
| for (i = 0; i < (no_of_chans - 1); i++) |
| create_dma_lch_chain(channels[i], channels[i + 1]); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_request_dma_chain); |
| |
| /** |
| * @brief omap_modify_dma_chain_param : Modify the chain's params - Modify the |
| * params after setting it. Dont do this while dma is running!! |
| * |
| * @param chain_id - Chained logical channel id. |
| * @param params |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL |
| */ |
| int omap_modify_dma_chain_params(int chain_id, |
| struct omap_dma_channel_params params) |
| { |
| int *channels; |
| u32 i; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 |
| || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { |
| /* |
| * Allowing client drivers to set common parameters now, |
| * so that later only relevant (src_start, dest_start |
| * and element count) can be set |
| */ |
| omap_set_dma_params(channels[i], ¶ms); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_modify_dma_chain_params); |
| |
| /** |
| * @brief omap_free_dma_chain - Free all the logical channels in a chain. |
| * |
| * @param chain_id |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL |
| */ |
| int omap_free_dma_chain(int chain_id) |
| { |
| int *channels; |
| u32 i; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { |
| dma_chan[channels[i]].next_linked_ch = -1; |
| dma_chan[channels[i]].prev_linked_ch = -1; |
| dma_chan[channels[i]].chain_id = -1; |
| dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; |
| omap_free_dma(channels[i]); |
| } |
| |
| kfree(channels); |
| |
| dma_linked_lch[chain_id].linked_dmach_q = NULL; |
| dma_linked_lch[chain_id].chain_mode = -1; |
| dma_linked_lch[chain_id].chain_state = -1; |
| |
| return (0); |
| } |
| EXPORT_SYMBOL(omap_free_dma_chain); |
| |
| /** |
| * @brief omap_dma_chain_status - Check if the chain is in |
| * active / inactive state. |
| * @param chain_id |
| * |
| * @return - Success : OMAP_DMA_CHAIN_ACTIVE/OMAP_DMA_CHAIN_INACTIVE |
| * Failure : -EINVAL |
| */ |
| int omap_dma_chain_status(int chain_id) |
| { |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| pr_debug("CHAINID=%d, qcnt=%d\n", chain_id, |
| dma_linked_lch[chain_id].q_count); |
| |
| if (OMAP_DMA_CHAIN_QEMPTY(chain_id)) |
| return OMAP_DMA_CHAIN_INACTIVE; |
| |
| return OMAP_DMA_CHAIN_ACTIVE; |
| } |
| EXPORT_SYMBOL(omap_dma_chain_status); |
| |
| /** |
| * @brief omap_dma_chain_a_transfer - Get a free channel from a chain, |
| * set the params and start the transfer. |
| * |
| * @param chain_id |
| * @param src_start - buffer start address |
| * @param dest_start - Dest address |
| * @param elem_count |
| * @param frame_count |
| * @param callbk_data - channel callback parameter data. |
| * |
| * @return - Success : 0 |
| * Failure: -EINVAL/-EBUSY |
| */ |
| int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start, |
| int elem_count, int frame_count, void *callbk_data) |
| { |
| int *channels; |
| u32 l, lch; |
| int start_dma = 0; |
| |
| /* |
| * if buffer size is less than 1 then there is |
| * no use of starting the chain |
| */ |
| if (elem_count < 1) { |
| printk(KERN_ERR "Invalid buffer size\n"); |
| return -EINVAL; |
| } |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 |
| || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exist\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if all the channels in chain are in use */ |
| if (OMAP_DMA_CHAIN_QFULL(chain_id)) |
| return -EBUSY; |
| |
| /* Frame count may be negative in case of indexed transfers */ |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get a free channel */ |
| lch = channels[dma_linked_lch[chain_id].q_tail]; |
| |
| /* Store the callback data */ |
| dma_chan[lch].data = callbk_data; |
| |
| /* Increment the q_tail */ |
| OMAP_DMA_CHAIN_INCQTAIL(chain_id); |
| |
| /* Set the params to the free channel */ |
| if (src_start != 0) |
| dma_write(src_start, CSSA(lch)); |
| if (dest_start != 0) |
| dma_write(dest_start, CDSA(lch)); |
| |
| /* Write the buffer size */ |
| dma_write(elem_count, CEN(lch)); |
| dma_write(frame_count, CFN(lch)); |
| |
| /* |
| * If the chain is dynamically linked, |
| * then we may have to start the chain if its not active |
| */ |
| if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_DYNAMIC_CHAIN) { |
| |
| /* |
| * In Dynamic chain, if the chain is not started, |
| * queue the channel |
| */ |
| if (dma_linked_lch[chain_id].chain_state == |
| DMA_CHAIN_NOTSTARTED) { |
| /* Enable the link in previous channel */ |
| if (dma_chan[dma_chan[lch].prev_linked_ch].state == |
| DMA_CH_QUEUED) |
| enable_lnk(dma_chan[lch].prev_linked_ch); |
| dma_chan[lch].state = DMA_CH_QUEUED; |
| } |
| |
| /* |
| * Chain is already started, make sure its active, |
| * if not then start the chain |
| */ |
| else { |
| start_dma = 1; |
| |
| if (dma_chan[dma_chan[lch].prev_linked_ch].state == |
| DMA_CH_STARTED) { |
| enable_lnk(dma_chan[lch].prev_linked_ch); |
| dma_chan[lch].state = DMA_CH_QUEUED; |
| start_dma = 0; |
| if (0 == ((1 << 7) & dma_read( |
| CCR(dma_chan[lch].prev_linked_ch)))) { |
| disable_lnk(dma_chan[lch]. |
| prev_linked_ch); |
| pr_debug("\n prev ch is stopped\n"); |
| start_dma = 1; |
| } |
| } |
| |
| else if (dma_chan[dma_chan[lch].prev_linked_ch].state |
| == DMA_CH_QUEUED) { |
| enable_lnk(dma_chan[lch].prev_linked_ch); |
| dma_chan[lch].state = DMA_CH_QUEUED; |
| start_dma = 0; |
| } |
| omap_enable_channel_irq(lch); |
| |
| l = dma_read(CCR(lch)); |
| |
| if ((0 == (l & (1 << 24)))) |
| l &= ~(1 << 25); |
| else |
| l |= (1 << 25); |
| if (start_dma == 1) { |
| if (0 == (l & (1 << 7))) { |
| l |= (1 << 7); |
| dma_chan[lch].state = DMA_CH_STARTED; |
| pr_debug("starting %d\n", lch); |
| dma_write(l, CCR(lch)); |
| } else |
| start_dma = 0; |
| } else { |
| if (0 == (l & (1 << 7))) |
| dma_write(l, CCR(lch)); |
| } |
| dma_chan[lch].flags |= OMAP_DMA_ACTIVE; |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_dma_chain_a_transfer); |
| |
| /** |
| * @brief omap_start_dma_chain_transfers - Start the chain |
| * |
| * @param chain_id |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL/-EBUSY |
| */ |
| int omap_start_dma_chain_transfers(int chain_id) |
| { |
| int *channels; |
| u32 l, i; |
| |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| if (dma_linked_lch[channels[0]].chain_state == DMA_CHAIN_STARTED) { |
| printk(KERN_ERR "Chain is already started\n"); |
| return -EBUSY; |
| } |
| |
| if (dma_linked_lch[chain_id].chain_mode == OMAP_DMA_STATIC_CHAIN) { |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; |
| i++) { |
| enable_lnk(channels[i]); |
| omap_enable_channel_irq(channels[i]); |
| } |
| } else { |
| omap_enable_channel_irq(channels[0]); |
| } |
| |
| l = dma_read(CCR(channels[0])); |
| l |= (1 << 7); |
| dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED; |
| dma_chan[channels[0]].state = DMA_CH_STARTED; |
| |
| if ((0 == (l & (1 << 24)))) |
| l &= ~(1 << 25); |
| else |
| l |= (1 << 25); |
| dma_write(l, CCR(channels[0])); |
| |
| dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_start_dma_chain_transfers); |
| |
| /** |
| * @brief omap_stop_dma_chain_transfers - Stop the dma transfer of a chain. |
| * |
| * @param chain_id |
| * |
| * @return - Success : 0 |
| * Failure : EINVAL |
| */ |
| int omap_stop_dma_chain_transfers(int chain_id) |
| { |
| int *channels; |
| u32 l, i; |
| u32 sys_cf; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* |
| * DMA Errata: |
| * Special programming model needed to disable DMA before end of block |
| */ |
| sys_cf = dma_read(OCP_SYSCONFIG); |
| l = sys_cf; |
| /* Middle mode reg set no Standby */ |
| l &= ~((1 << 12)|(1 << 13)); |
| dma_write(l, OCP_SYSCONFIG); |
| |
| for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) { |
| |
| /* Stop the Channel transmission */ |
| l = dma_read(CCR(channels[i])); |
| l &= ~(1 << 7); |
| dma_write(l, CCR(channels[i])); |
| |
| /* Disable the link in all the channels */ |
| disable_lnk(channels[i]); |
| dma_chan[channels[i]].state = DMA_CH_NOTSTARTED; |
| |
| } |
| dma_linked_lch[chain_id].chain_state = DMA_CHAIN_NOTSTARTED; |
| |
| /* Reset the Queue pointers */ |
| OMAP_DMA_CHAIN_QINIT(chain_id); |
| |
| /* Errata - put in the old value */ |
| dma_write(sys_cf, OCP_SYSCONFIG); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_stop_dma_chain_transfers); |
| |
| /* Get the index of the ongoing DMA in chain */ |
| /** |
| * @brief omap_get_dma_chain_index - Get the element and frame index |
| * of the ongoing DMA in chain |
| * |
| * @param chain_id |
| * @param ei - Element index |
| * @param fi - Frame index |
| * |
| * @return - Success : 0 |
| * Failure : -EINVAL |
| */ |
| int omap_get_dma_chain_index(int chain_id, int *ei, int *fi) |
| { |
| int lch; |
| int *channels; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| if ((!ei) || (!fi)) |
| return -EINVAL; |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get the current channel */ |
| lch = channels[dma_linked_lch[chain_id].q_head]; |
| |
| *ei = dma_read(CCEN(lch)); |
| *fi = dma_read(CCFN(lch)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_get_dma_chain_index); |
| |
| /** |
| * @brief omap_get_dma_chain_dst_pos - Get the destination position of the |
| * ongoing DMA in chain |
| * |
| * @param chain_id |
| * |
| * @return - Success : Destination position |
| * Failure : -EINVAL |
| */ |
| int omap_get_dma_chain_dst_pos(int chain_id) |
| { |
| int lch; |
| int *channels; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get the current channel */ |
| lch = channels[dma_linked_lch[chain_id].q_head]; |
| |
| return dma_read(CDAC(lch)); |
| } |
| EXPORT_SYMBOL(omap_get_dma_chain_dst_pos); |
| |
| /** |
| * @brief omap_get_dma_chain_src_pos - Get the source position |
| * of the ongoing DMA in chain |
| * @param chain_id |
| * |
| * @return - Success : Destination position |
| * Failure : -EINVAL |
| */ |
| int omap_get_dma_chain_src_pos(int chain_id) |
| { |
| int lch; |
| int *channels; |
| |
| /* Check for input params */ |
| if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) { |
| printk(KERN_ERR "Invalid chain id\n"); |
| return -EINVAL; |
| } |
| |
| /* Check if the chain exists */ |
| if (dma_linked_lch[chain_id].linked_dmach_q == NULL) { |
| printk(KERN_ERR "Chain doesn't exists\n"); |
| return -EINVAL; |
| } |
| |
| channels = dma_linked_lch[chain_id].linked_dmach_q; |
| |
| /* Get the current channel */ |
| lch = channels[dma_linked_lch[chain_id].q_head]; |
| |
| return dma_read(CSAC(lch)); |
| } |
| EXPORT_SYMBOL(omap_get_dma_chain_src_pos); |
| #endif /* ifndef CONFIG_ARCH_OMAP1 */ |
| |
| /*----------------------------------------------------------------------------*/ |
| |
| #ifdef CONFIG_ARCH_OMAP1 |
| |
| static int omap1_dma_handle_ch(int ch) |
| { |
| u32 csr; |
| |
| if (enable_1510_mode && ch >= 6) { |
| csr = dma_chan[ch].saved_csr; |
| dma_chan[ch].saved_csr = 0; |
| } else |
| csr = dma_read(CSR(ch)); |
| if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) { |
| dma_chan[ch + 6].saved_csr = csr >> 7; |
| csr &= 0x7f; |
| } |
| if ((csr & 0x3f) == 0) |
| return 0; |
| if (unlikely(dma_chan[ch].dev_id == -1)) { |
| printk(KERN_WARNING "Spurious interrupt from DMA channel " |
| "%d (CSR %04x)\n", ch, csr); |
| return 0; |
| } |
| if (unlikely(csr & OMAP1_DMA_TOUT_IRQ)) |
| printk(KERN_WARNING "DMA timeout with device %d\n", |
| dma_chan[ch].dev_id); |
| if (unlikely(csr & OMAP_DMA_DROP_IRQ)) |
| printk(KERN_WARNING "DMA synchronization event drop occurred " |
| "with device %d\n", dma_chan[ch].dev_id); |
| if (likely(csr & OMAP_DMA_BLOCK_IRQ)) |
| dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; |
| if (likely(dma_chan[ch].callback != NULL)) |
| dma_chan[ch].callback(ch, csr, dma_chan[ch].data); |
| |
| return 1; |
| } |
| |
| static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id) |
| { |
| int ch = ((int) dev_id) - 1; |
| int handled = 0; |
| |
| for (;;) { |
| int handled_now = 0; |
| |
| handled_now += omap1_dma_handle_ch(ch); |
| if (enable_1510_mode && dma_chan[ch + 6].saved_csr) |
| handled_now += omap1_dma_handle_ch(ch + 6); |
| if (!handled_now) |
| break; |
| handled += handled_now; |
| } |
| |
| return handled ? IRQ_HANDLED : IRQ_NONE; |
| } |
| |
| #else |
| #define omap1_dma_irq_handler NULL |
| #endif |
| |
| #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \ |
| defined(CONFIG_ARCH_OMAP4) |
| |
| static int omap2_dma_handle_ch(int ch) |
| { |
| u32 status = dma_read(CSR(ch)); |
| |
| if (!status) { |
| if (printk_ratelimit()) |
| printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", |
| ch); |
| dma_write(1 << ch, IRQSTATUS_L0); |
| return 0; |
| } |
| if (unlikely(dma_chan[ch].dev_id == -1)) { |
| if (printk_ratelimit()) |
| printk(KERN_WARNING "IRQ %04x for non-allocated DMA" |
| "channel %d\n", status, ch); |
| return 0; |
| } |
| if (unlikely(status & OMAP_DMA_DROP_IRQ)) |
| printk(KERN_INFO |
| "DMA synchronization event drop occurred with device " |
| "%d\n", dma_chan[ch].dev_id); |
| if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) { |
| printk(KERN_INFO "DMA transaction error with device %d\n", |
| dma_chan[ch].dev_id); |
| if (cpu_class_is_omap2()) { |
| /* Errata: sDMA Channel is not disabled |
| * after a transaction error. So we explicitely |
| * disable the channel |
| */ |
| u32 ccr; |
| |
| ccr = dma_read(CCR(ch)); |
| ccr &= ~OMAP_DMA_CCR_EN; |
| dma_write(ccr, CCR(ch)); |
| dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE; |
| } |
| } |
| if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ)) |
| printk(KERN_INFO "DMA secure error with device %d\n", |
| dma_chan[ch].dev_id); |
| if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ)) |
| printk(KERN_INFO "DMA misaligned error with device %d\n", |
| dma_chan[ch].dev_id); |
| |
| dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch)); |
| dma_write(1 << ch, IRQSTATUS_L0); |
| |
| /* If the ch is not chained then chain_id will be -1 */ |
| if (dma_chan[ch].chain_id != -1) { |
| int chain_id = dma_chan[ch].chain_id; |
| dma_chan[ch].state = DMA_CH_NOTSTARTED; |
| if (dma_read(CLNK_CTRL(ch)) & (1 << 15)) |
| dma_chan[dma_chan[ch].next_linked_ch].state = |
| DMA_CH_STARTED; |
| if (dma_linked_lch[chain_id].chain_mode == |
| OMAP_DMA_DYNAMIC_CHAIN) |
| disable_lnk(ch); |
| |
| if (!OMAP_DMA_CHAIN_QEMPTY(chain_id)) |
| OMAP_DMA_CHAIN_INCQHEAD(chain_id); |
| |
| status = dma_read(CSR(ch)); |
| } |
| |
| dma_write(status, CSR(ch)); |
| |
| if (likely(dma_chan[ch].callback != NULL)) |
| dma_chan[ch].callback(ch, status, dma_chan[ch].data); |
| |
| return 0; |
| } |
| |
| /* STATUS register count is from 1-32 while our is 0-31 */ |
| static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id) |
| { |
| u32 val, enable_reg; |
| int i; |
| |
| val = dma_read(IRQSTATUS_L0); |
| if (val == 0) { |
| if (printk_ratelimit()) |
| printk(KERN_WARNING "Spurious DMA IRQ\n"); |
| return IRQ_HANDLED; |
| } |
| enable_reg = dma_read(IRQENABLE_L0); |
| val &= enable_reg; /* Dispatch only relevant interrupts */ |
| for (i = 0; i < dma_lch_count && val != 0; i++) { |
| if (val & 1) |
| omap2_dma_handle_ch(i); |
| val >>= 1; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction omap24xx_dma_irq = { |
| .name = "DMA", |
| .handler = omap2_dma_irq_handler, |
| .flags = IRQF_DISABLED |
| }; |
| |
| #else |
| static struct irqaction omap24xx_dma_irq; |
| #endif |
| |
| /*----------------------------------------------------------------------------*/ |
| |
| static struct lcd_dma_info { |
| spinlock_t lock; |
| int reserved; |
| void (*callback)(u16 status, void *data); |
| void *cb_data; |
| |
| int active; |
| unsigned long addr, size; |
| int rotate, data_type, xres, yres; |
| int vxres; |
| int mirror; |
| int xscale, yscale; |
| int ext_ctrl; |
| int src_port; |
| int single_transfer; |
| } lcd_dma; |
| |
| void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, |
| int data_type) |
| { |
| lcd_dma.addr = addr; |
| lcd_dma.data_type = data_type; |
| lcd_dma.xres = fb_xres; |
| lcd_dma.yres = fb_yres; |
| } |
| EXPORT_SYMBOL(omap_set_lcd_dma_b1); |
| |
| void omap_set_lcd_dma_src_port(int port) |
| { |
| lcd_dma.src_port = port; |
| } |
| |
| void omap_set_lcd_dma_ext_controller(int external) |
| { |
| lcd_dma.ext_ctrl = external; |
| } |
| EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); |
| |
| void omap_set_lcd_dma_single_transfer(int single) |
| { |
| lcd_dma.single_transfer = single; |
| } |
| EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); |
| |
| void omap_set_lcd_dma_b1_rotation(int rotate) |
| { |
| if (omap_dma_in_1510_mode()) { |
| printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); |
| BUG(); |
| return; |
| } |
| lcd_dma.rotate = rotate; |
| } |
| EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); |
| |
| void omap_set_lcd_dma_b1_mirror(int mirror) |
| { |
| if (omap_dma_in_1510_mode()) { |
| printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); |
| BUG(); |
| } |
| lcd_dma.mirror = mirror; |
| } |
| EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); |
| |
| void omap_set_lcd_dma_b1_vxres(unsigned long vxres) |
| { |
| if (omap_dma_in_1510_mode()) { |
| printk(KERN_ERR "DMA virtual resulotion is not supported " |
| "in 1510 mode\n"); |
| BUG(); |
| } |
| lcd_dma.vxres = vxres; |
| } |
| EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); |
| |
| void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) |
| { |
| if (omap_dma_in_1510_mode()) { |
| printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); |
| BUG(); |
| } |
| lcd_dma.xscale = xscale; |
| lcd_dma.yscale = yscale; |
| } |
| EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); |
| |
| static void set_b1_regs(void) |
| { |
| unsigned long top, bottom; |
| int es; |
| u16 w; |
| unsigned long en, fn; |
| long ei, fi; |
| unsigned long vxres; |
| unsigned int xscale, yscale; |
| |
| switch (lcd_dma.data_type) { |
| case OMAP_DMA_DATA_TYPE_S8: |
| es = 1; |
| break; |
| case OMAP_DMA_DATA_TYPE_S16: |
| es = 2; |
| break; |
| case OMAP_DMA_DATA_TYPE_S32: |
| es = 4; |
| break; |
| default: |
| BUG(); |
| return; |
| } |
| |
| vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; |
| xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; |
| yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; |
| BUG_ON(vxres < lcd_dma.xres); |
| |
| #define PIXADDR(x, y) (lcd_dma.addr + \ |
| ((y) * vxres * yscale + (x) * xscale) * es) |
| #define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) |
| |
| switch (lcd_dma.rotate) { |
| case 0: |
| if (!lcd_dma.mirror) { |
| top = PIXADDR(0, 0); |
| bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); |
| /* 1510 DMA requires the bottom address to be 2 more |
| * than the actual last memory access location. */ |
| if (omap_dma_in_1510_mode() && |
| lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) |
| bottom += 2; |
| ei = PIXSTEP(0, 0, 1, 0); |
| fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); |
| } else { |
| top = PIXADDR(lcd_dma.xres - 1, 0); |
| bottom = PIXADDR(0, lcd_dma.yres - 1); |
| ei = PIXSTEP(1, 0, 0, 0); |
| fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); |
| } |
| en = lcd_dma.xres; |
| fn = lcd_dma.yres; |
| break; |
| case 90: |
| if (!lcd_dma.mirror) { |
| top = PIXADDR(0, lcd_dma.yres - 1); |
| bottom = PIXADDR(lcd_dma.xres - 1, 0); |
| ei = PIXSTEP(0, 1, 0, 0); |
| fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); |
| } else { |
| top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); |
| bottom = PIXADDR(0, 0); |
| ei = PIXSTEP(0, 1, 0, 0); |
| fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); |
| } |
| en = lcd_dma.yres; |
| fn = lcd_dma.xres; |
| break; |
| case 180: |
| if (!lcd_dma.mirror) { |
| top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); |
| bottom = PIXADDR(0, 0); |
| ei = PIXSTEP(1, 0, 0, 0); |
| fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); |
| } else { |
| top = PIXADDR(0, lcd_dma.yres - 1); |
| bottom = PIXADDR(lcd_dma.xres - 1, 0); |
| ei = PIXSTEP(0, 0, 1, 0); |
| fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); |
| } |
| en = lcd_dma.xres; |
| fn = lcd_dma.yres; |
| break; |
| case 270: |
| if (!lcd_dma.mirror) { |
| top = PIXADDR(lcd_dma.xres - 1, 0); |
| bottom = PIXADDR(0, lcd_dma.yres - 1); |
| ei = PIXSTEP(0, 0, 0, 1); |
| fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); |
| } else { |
| top = PIXADDR(0, 0); |
| bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); |
| ei = PIXSTEP(0, 0, 0, 1); |
| fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); |
| } |
| en = lcd_dma.yres; |
| fn = lcd_dma.xres; |
| break; |
| default: |
| BUG(); |
| return; /* Suppress warning about uninitialized vars */ |
| } |
| |
| if (omap_dma_in_1510_mode()) { |
| omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); |
| omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); |
| omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); |
| omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); |
| |
| return; |
| } |
| |
| /* 1610 regs */ |
| omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); |
| omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); |
| omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); |
| omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); |
| |
| omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); |
| omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CSDP); |
| w &= ~0x03; |
| w |= lcd_dma.data_type; |
| omap_writew(w, OMAP1610_DMA_LCD_CSDP); |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CTRL); |
| /* Always set the source port as SDRAM for now*/ |
| w &= ~(0x03 << 6); |
| if (lcd_dma.callback != NULL) |
| w |= 1 << 1; /* Block interrupt enable */ |
| else |
| w &= ~(1 << 1); |
| omap_writew(w, OMAP1610_DMA_LCD_CTRL); |
| |
| if (!(lcd_dma.rotate || lcd_dma.mirror || |
| lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) |
| return; |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CCR); |
| /* Set the double-indexed addressing mode */ |
| w |= (0x03 << 12); |
| omap_writew(w, OMAP1610_DMA_LCD_CCR); |
| |
| omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); |
| omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); |
| omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); |
| } |
| |
| static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) |
| { |
| u16 w; |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CTRL); |
| if (unlikely(!(w & (1 << 3)))) { |
| printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); |
| return IRQ_NONE; |
| } |
| /* Ack the IRQ */ |
| w |= (1 << 3); |
| omap_writew(w, OMAP1610_DMA_LCD_CTRL); |
| lcd_dma.active = 0; |
| if (lcd_dma.callback != NULL) |
| lcd_dma.callback(w, lcd_dma.cb_data); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int omap_request_lcd_dma(void (*callback)(u16 status, void *data), |
| void *data) |
| { |
| spin_lock_irq(&lcd_dma.lock); |
| if (lcd_dma.reserved) { |
| spin_unlock_irq(&lcd_dma.lock); |
| printk(KERN_ERR "LCD DMA channel already reserved\n"); |
| BUG(); |
| return -EBUSY; |
| } |
| lcd_dma.reserved = 1; |
| spin_unlock_irq(&lcd_dma.lock); |
| lcd_dma.callback = callback; |
| lcd_dma.cb_data = data; |
| lcd_dma.active = 0; |
| lcd_dma.single_transfer = 0; |
| lcd_dma.rotate = 0; |
| lcd_dma.vxres = 0; |
| lcd_dma.mirror = 0; |
| lcd_dma.xscale = 0; |
| lcd_dma.yscale = 0; |
| lcd_dma.ext_ctrl = 0; |
| lcd_dma.src_port = 0; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_request_lcd_dma); |
| |
| void omap_free_lcd_dma(void) |
| { |
| spin_lock(&lcd_dma.lock); |
| if (!lcd_dma.reserved) { |
| spin_unlock(&lcd_dma.lock); |
| printk(KERN_ERR "LCD DMA is not reserved\n"); |
| BUG(); |
| return; |
| } |
| if (!enable_1510_mode) |
| omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, |
| OMAP1610_DMA_LCD_CCR); |
| lcd_dma.reserved = 0; |
| spin_unlock(&lcd_dma.lock); |
| } |
| EXPORT_SYMBOL(omap_free_lcd_dma); |
| |
| void omap_enable_lcd_dma(void) |
| { |
| u16 w; |
| |
| /* |
| * Set the Enable bit only if an external controller is |
| * connected. Otherwise the OMAP internal controller will |
| * start the transfer when it gets enabled. |
| */ |
| if (enable_1510_mode || !lcd_dma.ext_ctrl) |
| return; |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CTRL); |
| w |= 1 << 8; |
| omap_writew(w, OMAP1610_DMA_LCD_CTRL); |
| |
| lcd_dma.active = 1; |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CCR); |
| w |= 1 << 7; |
| omap_writew(w, OMAP1610_DMA_LCD_CCR); |
| } |
| EXPORT_SYMBOL(omap_enable_lcd_dma); |
| |
| void omap_setup_lcd_dma(void) |
| { |
| BUG_ON(lcd_dma.active); |
| if (!enable_1510_mode) { |
| /* Set some reasonable defaults */ |
| omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); |
| omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); |
| omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); |
| } |
| set_b1_regs(); |
| if (!enable_1510_mode) { |
| u16 w; |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CCR); |
| /* |
| * If DMA was already active set the end_prog bit to have |
| * the programmed register set loaded into the active |
| * register set. |
| */ |
| w |= 1 << 11; /* End_prog */ |
| if (!lcd_dma.single_transfer) |
| w |= (3 << 8); /* Auto_init, repeat */ |
| omap_writew(w, OMAP1610_DMA_LCD_CCR); |
| } |
| } |
| EXPORT_SYMBOL(omap_setup_lcd_dma); |
| |
| void omap_stop_lcd_dma(void) |
| { |
| u16 w; |
| |
| lcd_dma.active = 0; |
| if (enable_1510_mode || !lcd_dma.ext_ctrl) |
| return; |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CCR); |
| w &= ~(1 << 7); |
| omap_writew(w, OMAP1610_DMA_LCD_CCR); |
| |
| w = omap_readw(OMAP1610_DMA_LCD_CTRL); |
| w &= ~(1 << 8); |
| omap_writew(w, OMAP1610_DMA_LCD_CTRL); |
| } |
| EXPORT_SYMBOL(omap_stop_lcd_dma); |
| |
| /*----------------------------------------------------------------------------*/ |
| |
| static int __init omap_init_dma(void) |
| { |
| int ch, r; |
| |
| if (cpu_class_is_omap1()) { |
| omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE); |
| dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; |
| } else if (cpu_is_omap24xx()) { |
| omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE); |
| dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; |
| } else if (cpu_is_omap34xx()) { |
| omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE); |
| dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; |
| } else if (cpu_is_omap44xx()) { |
| omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE); |
| dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT; |
| } else { |
| pr_err("DMA init failed for unsupported omap\n"); |
| return -ENODEV; |
| } |
| |
| if (cpu_class_is_omap2() && omap_dma_reserve_channels |
| && (omap_dma_reserve_channels <= dma_lch_count)) |
| dma_lch_count = omap_dma_reserve_channels; |
| |
| dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count, |
| GFP_KERNEL); |
| if (!dma_chan) |
| return -ENOMEM; |
| |
| if (cpu_class_is_omap2()) { |
| dma_linked_lch = kzalloc(sizeof(struct dma_link_info) * |
| dma_lch_count, GFP_KERNEL); |
| if (!dma_linked_lch) { |
| kfree(dma_chan); |
| return -ENOMEM; |
| } |
| } |
| |
| if (cpu_is_omap15xx()) { |
| printk(KERN_INFO "DMA support for OMAP15xx initialized\n"); |
| dma_chan_count = 9; |
| enable_1510_mode = 1; |
| } else if (cpu_is_omap16xx() || cpu_is_omap7xx()) { |
| printk(KERN_INFO "OMAP DMA hardware version %d\n", |
| dma_read(HW_ID)); |
| printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", |
| (dma_read(CAPS_0_U) << 16) | |
| dma_read(CAPS_0_L), |
| (dma_read(CAPS_1_U) << 16) | |
| dma_read(CAPS_1_L), |
| dma_read(CAPS_2), dma_read(CAPS_3), |
| dma_read(CAPS_4)); |
| if (!enable_1510_mode) { |
| u16 w; |
| |
| /* Disable OMAP 3.0/3.1 compatibility mode. */ |
| w = dma_read(GSCR); |
| w |= 1 << 3; |
| dma_write(w, GSCR); |
| dma_chan_count = 16; |
| } else |
| dma_chan_count = 9; |
| if (cpu_is_omap16xx()) { |
| u16 w; |
| |
| /* this would prevent OMAP sleep */ |
| w = omap_readw(OMAP1610_DMA_LCD_CTRL); |
| w &= ~(1 << 8); |
| omap_writew(w, OMAP1610_DMA_LCD_CTRL); |
| } |
| } else if (cpu_class_is_omap2()) { |
| u8 revision = dma_read(REVISION) & 0xff; |
| printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", |
| revision >> 4, revision & 0xf); |
| dma_chan_count = dma_lch_count; |
| } else { |
| dma_chan_count = 0; |
| return 0; |
| } |
| |
| spin_lock_init(&lcd_dma.lock); |
| spin_lock_init(&dma_chan_lock); |
| |
| for (ch = 0; ch < dma_chan_count; ch++) { |
| omap_clear_dma(ch); |
| dma_chan[ch].dev_id = -1; |
| dma_chan[ch].next_lch = -1; |
| |
| if (ch >= 6 && enable_1510_mode) |
| continue; |
| |
| if (cpu_class_is_omap1()) { |
| /* |
| * request_irq() doesn't like dev_id (ie. ch) being |
| * zero, so we have to kludge around this. |
| */ |
| r = request_irq(omap1_dma_irq[ch], |
| omap1_dma_irq_handler, 0, "DMA", |
| (void *) (ch + 1)); |
| if (r != 0) { |
| int i; |
| |
| printk(KERN_ERR "unable to request IRQ %d " |
| "for DMA (error %d)\n", |
| omap1_dma_irq[ch], r); |
| for (i = 0; i < ch; i++) |
| free_irq(omap1_dma_irq[i], |
| (void *) (i + 1)); |
| return r; |
| } |
| } |
| } |
| |
| if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) |
| omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE, |
| DMA_DEFAULT_FIFO_DEPTH, 0); |
| |
| if (cpu_class_is_omap2()) { |
| int irq; |
| if (cpu_is_omap44xx()) |
| irq = INT_44XX_SDMA_IRQ0; |
| else |
| irq = INT_24XX_SDMA_IRQ0; |
| setup_irq(irq, &omap24xx_dma_irq); |
| } |
| |
| /* Enable smartidle idlemodes and autoidle */ |
| if (cpu_is_omap34xx()) { |
| u32 v = dma_read(OCP_SYSCONFIG); |
| v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK | |
| DMA_SYSCONFIG_SIDLEMODE_MASK | |
| DMA_SYSCONFIG_AUTOIDLE); |
| v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | |
| DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) | |
| DMA_SYSCONFIG_AUTOIDLE); |
| dma_write(v , OCP_SYSCONFIG); |
| } |
| |
| |
| /* FIXME: Update LCD DMA to work on 24xx */ |
| if (cpu_class_is_omap1()) { |
| r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, |
| "LCD DMA", NULL); |
| if (r != 0) { |
| int i; |
| |
| printk(KERN_ERR "unable to request IRQ for LCD DMA " |
| "(error %d)\n", r); |
| for (i = 0; i < dma_chan_count; i++) |
| free_irq(omap1_dma_irq[i], (void *) (i + 1)); |
| return r; |
| } |
| } |
| |
| return 0; |
| } |
| |
| arch_initcall(omap_init_dma); |
| |
| /* |
| * Reserve the omap SDMA channels using cmdline bootarg |
| * "omap_dma_reserve_ch=". The valid range is 1 to 32 |
| */ |
| static int __init omap_dma_cmdline_reserve_ch(char *str) |
| { |
| if (get_option(&str, &omap_dma_reserve_channels) != 1) |
| omap_dma_reserve_channels = 0; |
| return 1; |
| } |
| |
| __setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch); |
| |
| |