ARM: EXYNOS: add support for EXYNOS5250 SoC
This patch add support for EXYNOS5250 SoC has two Cortex-A15 cores.
Since actually, most codes in mach-exynos/ are used commonly for
EXYNOS4 and EXYNOS5 the EXYNOS5/EXYNOS5250 has been implemented
in mach-exynos/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4a82cf0..7fdb139 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -49,9 +49,12 @@
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
+static const char name_exynos5250[] = "EXYNOS5250";
static void exynos4_map_io(void);
+static void exynos5_map_io(void);
static void exynos4_init_clocks(int xtal);
+static void exynos5_init_clocks(int xtal);
static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
@@ -80,6 +83,14 @@
.init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
+ }, {
+ .idcode = EXYNOS5250_SOC_ID,
+ .idmask = EXYNOS5_SOC_MASK,
+ .map_io = exynos5_map_io,
+ .init_clocks = exynos5_init_clocks,
+ .init_uarts = exynos_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos5250,
},
};
@@ -88,10 +99,14 @@
static struct map_desc exynos_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID),
+ .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
.virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
.length = SZ_64K,
@@ -141,11 +156,7 @@
.pfn = __phys_to_pfn(EXYNOS4_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
+ }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -206,11 +217,80 @@
},
};
+static struct map_desc exynos5_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
+ .length = 144 * SZ_1K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
+
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
}
+void exynos5_restart(char mode, const char *cmd)
+{
+ __raw_writel(0x1, EXYNOS_SWRESET);
+}
+
/*
* exynos_map_io
*
@@ -261,6 +341,16 @@
s5p_hdmi_setname("exynos4-hdmi");
}
+static void __init exynos5_map_io(void)
+{
+ iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+}
+
static void __init exynos4_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -277,6 +367,17 @@
exynos4_setup_clocks();
}
+static void __init exynos5_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ exynos5_register_clocks();
+ exynos5_setup_clocks();
+}
+
#define COMBINER_ENABLE_SET 0x0
#define COMBINER_ENABLE_CLEAR 0x4
#define COMBINER_INT_STATUS 0xC
@@ -420,24 +521,59 @@
s5p_init_irq(NULL, 0);
}
+void __init exynos5_init_irq(void)
+{
+ int irq;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /*
+ * The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
struct bus_type exynos4_subsys = {
.name = "exynos4-core",
.dev_name = "exynos4-core",
};
+struct bus_type exynos5_subsys = {
+ .name = "exynos5-core",
+ .dev_name = "exynos5-core",
+};
+
static struct device exynos4_dev = {
.bus = &exynos4_subsys,
};
-static int __init exynos4_core_init(void)
+static struct device exynos5_dev = {
+ .bus = &exynos5_subsys,
+};
+
+static int __init exynos_core_init(void)
{
- return subsys_system_register(&exynos4_subsys, NULL);
+ if (soc_is_exynos5250())
+ return subsys_system_register(&exynos5_subsys, NULL);
+ else
+ return subsys_system_register(&exynos4_subsys, NULL);
}
-core_initcall(exynos4_core_init);
+core_initcall(exynos_core_init);
#ifdef CONFIG_CACHE_L2X0
static int __init exynos4_l2x0_cache_init(void)
{
+ if (soc_is_exynos5250())
+ return 0;
+
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
@@ -457,14 +593,42 @@
return 0;
}
-
early_initcall(exynos4_l2x0_cache_init);
#endif
+static int __init exynos5_l2_cache_init(void)
+{
+ unsigned int val;
+
+ if (!soc_is_exynos5250())
+ return 0;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #(1 << 2)\n" /* cache disable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ "mrc p15, 1, %0, c9, c0, 2\n"
+ : "=r"(val));
+
+ val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0);
+
+ asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #(1 << 2)\n" /* cache enable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : : "r"(val));
+
+ return 0;
+}
+early_initcall(exynos5_l2_cache_init);
+
static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
- return device_register(&exynos4_dev);
+
+ if (soc_is_exynos5250())
+ return device_register(&exynos5_dev);
+ else
+ return device_register(&exynos4_dev);
}
/* uart registration process */
@@ -673,6 +837,9 @@
{
int irq;
+ if (soc_is_exynos5250())
+ return 0;
+
for (irq = 0 ; irq <= 31 ; irq++) {
irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
handle_level_irq);