diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index db6f97a..79ea98c 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -272,7 +272,7 @@
 	 * 64 bytes, to ensure I do not get throttled.
 	 * Ask USB mailing list for better aproach.
 	 */
-	tty = port->tty;
+	tty = port->port.tty;
 
 	if (!tty) {
 		schedule_work(&priv->rx_work);
@@ -378,13 +378,14 @@
 	}
 }
 
-static int aircable_write_room(struct usb_serial_port *port)
+static int aircable_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	return serial_buf_data_avail(priv->tx_buf);
 }
 
-static int aircable_write(struct usb_serial_port *port,
+static int aircable_write(struct tty_struct *tty, struct usb_serial_port *port,
 			  const unsigned char *source, int count)
 {
 	struct aircable_private *priv = usb_get_serial_port_data(port);
@@ -466,7 +467,7 @@
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->open_count) {
+		if (!port->port.count) {
 			dbg("%s - port is closed, exiting.", __func__);
 			return;
 		}
@@ -494,7 +495,7 @@
 	usb_serial_debug_data(debug, &port->dev, __func__,
 				urb->actual_length, urb->transfer_buffer);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		if (urb->actual_length <= 2) {
 			/* This is an incomplete package */
@@ -528,7 +529,7 @@
 	}
 
 	/* Schedule the next read _if_ we are still open */
-	if (port->open_count) {
+	if (port->port.count) {
 		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 				  usb_rcvbulkpipe(port->serial->dev,
 					  port->bulk_in_endpointAddress),
@@ -547,8 +548,9 @@
 }
 
 /* Based on ftdi_sio.c throttle */
-static void aircable_throttle(struct usb_serial_port *port)
+static void aircable_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -560,8 +562,9 @@
 }
 
 /* Based on ftdi_sio.c unthrottle */
-static void aircable_unthrottle(struct usb_serial_port *port)
+static void aircable_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct aircable_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled;
 	unsigned long flags;
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
new file mode 100644
index 0000000..b3f1d1e
--- /dev/null
+++ b/drivers/usb/serial/airprime.c
@@ -0,0 +1,355 @@
+/*
+ * AirPrime CDMA Wireless Serial USB driver
+ *
+ * Copyright (C) 2005-2006 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License version
+ *	2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+	{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
+	{ },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+#define URB_TRANSFER_BUFFER_SIZE	4096
+#define NUM_READ_URBS			4
+#define NUM_WRITE_URBS			4
+#define NUM_BULK_EPS			3
+#define MAX_BULK_EPS			6
+
+/* if overridden by the user, then use their value for the size of the
+ * read and write urbs, and the number of endpoints */
+static int buffer_size = URB_TRANSFER_BUFFER_SIZE;
+static int endpoints = NUM_BULK_EPS;
+static int debug;
+struct airprime_private {
+	spinlock_t lock;
+	int outstanding_urbs;
+	int throttled;
+	struct urb *read_urbp[NUM_READ_URBS];
+
+	/* Settings for the port */
+	int rts_state;	/* Handshaking pins (outputs) */
+	int dtr_state;
+	int cts_state;	/* Handshaking pins (inputs) */
+	int dsr_state;
+	int dcd_state;
+	int ri_state;
+};
+
+static int airprime_send_setup(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct airprime_private *priv;
+
+	dbg("%s", __func__);
+
+	if (port->number != 0)
+		return 0;
+
+	priv = usb_get_serial_port_data(port);
+
+	if (port->port.tty) {
+		int val = 0;
+		if (priv->dtr_state)
+			val |= 0x01;
+		if (priv->rts_state)
+			val |= 0x02;
+
+		return usb_control_msg(serial->dev,
+					usb_rcvctrlpipe(serial->dev, 0),
+					0x22, 0x21, val, 0, NULL, 0,
+					USB_CTRL_SET_TIMEOUT);
+	}
+
+	return 0;
+}
+
+static void airprime_read_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	unsigned char *data = urb->transfer_buffer;
+	struct tty_struct *tty;
+	int result;
+	int status = urb->status;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (status) {
+		dbg("%s - nonzero read bulk status received: %d",
+		    __func__, status);
+		return;
+	}
+	usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
+
+	tty = port->port.tty;
+	if (tty && urb->actual_length) {
+		tty_insert_flip_string(tty, data, urb->actual_length);
+		tty_flip_buffer_push(tty);
+	}
+
+	result = usb_submit_urb(urb, GFP_ATOMIC);
+	if (result)
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
+	return;
+}
+
+static void airprime_write_bulk_callback(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	int status = urb->status;
+	unsigned long flags;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* free up the transfer buffer, as usb_free_urb() does not do this */
+	kfree(urb->transfer_buffer);
+
+	if (status)
+		dbg("%s - nonzero write bulk status received: %d",
+		    __func__, status);
+	spin_lock_irqsave(&priv->lock, flags);
+	--priv->outstanding_urbs;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	usb_serial_port_softint(port);
+}
+
+static int airprime_open(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp)
+{
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct urb *urb;
+	char *buffer = NULL;
+	int i;
+	int result = 0;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	/* initialize our private data structure if it isn't already created */
+	if (!priv) {
+		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+		if (!priv) {
+			result = -ENOMEM;
+			goto out;
+		}
+		spin_lock_init(&priv->lock);
+		usb_set_serial_port_data(port, priv);
+	}
+
+	/* Set some sane defaults */
+	priv->rts_state = 1;
+	priv->dtr_state = 1;
+
+	for (i = 0; i < NUM_READ_URBS; ++i) {
+		buffer = kmalloc(buffer_size, GFP_KERNEL);
+		if (!buffer) {
+			dev_err(&port->dev, "%s - out of memory.\n",
+				__func__);
+			result = -ENOMEM;
+			goto errout;
+		}
+		urb = usb_alloc_urb(0, GFP_KERNEL);
+		if (!urb) {
+			kfree(buffer);
+			dev_err(&port->dev, "%s - no more urbs?\n",
+				__func__);
+			result = -ENOMEM;
+			goto errout;
+		}
+		usb_fill_bulk_urb(urb, serial->dev,
+				  usb_rcvbulkpipe(serial->dev,
+					  port->bulk_out_endpointAddress),
+				  buffer, buffer_size,
+				  airprime_read_bulk_callback, port);
+		result = usb_submit_urb(urb, GFP_KERNEL);
+		if (result) {
+			usb_free_urb(urb);
+			kfree(buffer);
+			dev_err(&port->dev,
+				"%s - failed submitting read urb %d for port %d, error %d\n",
+				__func__, i, port->number, result);
+			goto errout;
+		}
+		/* remember this urb so we can kill it when the
+		   port is closed */
+		priv->read_urbp[i] = urb;
+	}
+
+	airprime_send_setup(port);
+
+	goto out;
+
+ errout:
+	/* some error happened, cancel any submitted urbs and clean up
+	   anything that got allocated successfully */
+
+	while (i-- != 0) {
+		urb = priv->read_urbp[i];
+		buffer = urb->transfer_buffer;
+		usb_kill_urb(urb);
+		usb_free_urb(urb);
+		kfree(buffer);
+	}
+
+ out:
+	return result;
+}
+
+static void airprime_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
+{
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	int i;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	priv->rts_state = 0;
+	priv->dtr_state = 0;
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected)
+		airprime_send_setup(port);
+	mutex_unlock(&port->serial->disc_mutex);
+
+	for (i = 0; i < NUM_READ_URBS; ++i) {
+		usb_kill_urb(priv->read_urbp[i]);
+		kfree(priv->read_urbp[i]->transfer_buffer);
+		usb_free_urb(priv->read_urbp[i]);
+	}
+
+	/* free up private structure */
+	kfree(priv);
+	usb_set_serial_port_data(port, NULL);
+}
+
+static int airprime_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const unsigned char *buf, int count)
+{
+	struct airprime_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct urb *urb;
+	unsigned char *buffer;
+	unsigned long flags;
+	int status;
+	dbg("%s - port %d", __func__, port->number);
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->outstanding_urbs > NUM_WRITE_URBS) {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dbg("%s - write limit hit\n", __func__);
+		return 0;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+	buffer = kmalloc(count, GFP_ATOMIC);
+	if (!buffer) {
+		dev_err(&port->dev, "out of memory\n");
+		return -ENOMEM;
+	}
+	urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!urb) {
+		dev_err(&port->dev, "no more free urbs\n");
+		kfree(buffer);
+		return -ENOMEM;
+	}
+	memcpy(buffer, buf, count);
+
+	usb_serial_debug_data(debug, &port->dev, __func__, count, buffer);
+
+	usb_fill_bulk_urb(urb, serial->dev,
+			  usb_sndbulkpipe(serial->dev,
+					  port->bulk_out_endpointAddress),
+			  buffer, count,
+			  airprime_write_bulk_callback, port);
+
+	/* send it down the pipe */
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status) {
+		dev_err(&port->dev,
+			"%s - usb_submit_urb(write bulk) failed with status = %d\n",
+			__func__, status);
+		count = status;
+		kfree(buffer);
+	} else {
+		spin_lock_irqsave(&priv->lock, flags);
+		++priv->outstanding_urbs;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	/* we are done with this urb, so let the host driver
+	 * really free it when it is finished with it */
+	usb_free_urb(urb);
+	return count;
+}
+
+static struct usb_driver airprime_driver = {
+	.name =		"airprime",
+	.probe =	usb_serial_probe,
+	.disconnect =	usb_serial_disconnect,
+	.id_table =	id_table,
+	.no_dynamic_id =	1,
+};
+
+static struct usb_serial_driver airprime_device = {
+	.driver = {
+		.owner =	THIS_MODULE,
+		.name =		"airprime",
+	},
+	.usb_driver =		&airprime_driver,
+	.id_table =		id_table,
+	.open =			airprime_open,
+	.close =		airprime_close,
+	.write =		airprime_write,
+};
+
+static int __init airprime_init(void)
+{
+	int retval;
+
+	airprime_device.num_ports = endpoints;
+	if (endpoints < 0 || endpoints >= MAX_BULK_EPS)
+		airprime_device.num_ports = NUM_BULK_EPS;
+
+	retval = usb_serial_register(&airprime_device);
+	if (retval)
+		return retval;
+	retval = usb_register(&airprime_driver);
+	if (retval)
+		usb_serial_deregister(&airprime_device);
+	return retval;
+}
+
+static void __exit airprime_exit(void)
+{
+	dbg("%s", __func__);
+
+	usb_deregister(&airprime_driver);
+	usb_serial_deregister(&airprime_device);
+}
+
+module_init(airprime_init);
+module_exit(airprime_exit);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled");
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size,
+		"Size of the transfer buffers in bytes (default 4096)");
+module_param(endpoints, int, 0);
+MODULE_PARM_DESC(endpoints, "Number of bulk EPs to configure (default 3)");
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 77895c8..aec6188 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -158,12 +158,13 @@
 	return -ENOMEM;
 }
 
-static void ark3116_set_termios(struct usb_serial_port *port,
+static void ark3116_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
 				struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct ark3116_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	unsigned long flags;
 	int baud;
@@ -177,8 +178,8 @@
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B9600 | CS8
+		*termios = tty_std_termios;
+		termios->c_cflag = B9600 | CS8
 					      | CREAD | HUPCL | CLOCAL;
 		termios->c_ispeed = 9600;
 		termios->c_ospeed = 9600;
@@ -192,7 +193,7 @@
 	buf = kmalloc(1, GFP_KERNEL);
 	if (!buf) {
 		dbg("error kmalloc");
-		*port->tty->termios = *old_termios;
+		*termios = *old_termios;
 		return;
 	}
 
@@ -243,7 +244,7 @@
 	}
 
 	/* set baudrate */
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 
 	switch (baud) {
 	case 75:
@@ -262,11 +263,11 @@
 	case 230400:
 	case 460800:
 		/* Report the resulting rate back to the caller */
-		tty_encode_baud_rate(port->tty, baud, baud);
+		tty_encode_baud_rate(tty, baud, baud);
 		break;
 	/* set 9600 as default (if given baudrate is invalid for example) */
 	default:
-		tty_encode_baud_rate(port->tty, 9600, 9600);
+		tty_encode_baud_rate(tty, 9600, 9600);
 	case 0:
 		baud = 9600;
 	}
@@ -317,7 +318,8 @@
 	return;
 }
 
-static int ark3116_open(struct usb_serial_port *port, struct file *filp)
+static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filp)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -332,7 +334,7 @@
 		return -ENOMEM;
 	}
 
-	result = usb_serial_generic_open(port, filp);
+	result = usb_serial_generic_open(tty, port, filp);
 	if (result)
 		goto err_out;
 
@@ -362,8 +364,8 @@
 	ARK3116_RCV(serial, 124, 0xFE, 0xC0, 0x0000, 0x0006, 0xFF, buf);
 
 	/* initialise termios */
-	if (port->tty)
-		ark3116_set_termios(port, &tmp_termios);
+	if (tty)
+		ark3116_set_termios(tty, port, &tmp_termios);
 
 err_out:
 	kfree(buf);
@@ -371,9 +373,10 @@
 	return result;
 }
 
-static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
+static int ark3116_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct serial_struct serstruct;
 	void __user *user_arg = (void __user *)arg;
 
@@ -403,8 +406,9 @@
 	return -ENOIOCTLCMD;
 }
 
-static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
+static int ark3116_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	char *buf;
 	char temp;
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 0a322fc..1a76269 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -89,14 +89,13 @@
 /* function prototypes for a Belkin USB Serial Adapter F5U103 */
 static int  belkin_sa_startup		(struct usb_serial *serial);
 static void belkin_sa_shutdown		(struct usb_serial *serial);
-static int  belkin_sa_open		(struct usb_serial_port *port, struct file *filp);
-static void belkin_sa_close		(struct usb_serial_port *port, struct file *filp);
+static int  belkin_sa_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void belkin_sa_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
 static void belkin_sa_read_int_callback (struct urb *urb);
-static void belkin_sa_set_termios	(struct usb_serial_port *port, struct ktermios * old);
-static int  belkin_sa_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void belkin_sa_break_ctl		(struct usb_serial_port *port, int break_state );
-static int  belkin_sa_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  belkin_sa_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
+static void belkin_sa_set_termios	(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static void belkin_sa_break_ctl		(struct tty_struct *tty, int break_state );
+static int  belkin_sa_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  belkin_sa_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
 
 
 static struct usb_device_id id_table_combined [] = {
@@ -132,7 +131,6 @@
 	.open =			belkin_sa_open,
 	.close =		belkin_sa_close,
 	.read_int_callback =	belkin_sa_read_int_callback,	/* How we get the status info */
-	.ioctl =		belkin_sa_ioctl,
 	.set_termios =		belkin_sa_set_termios,
 	.break_ctl =		belkin_sa_break_ctl,
 	.tiocmget =		belkin_sa_tiocmget,
@@ -190,7 +188,7 @@
 }
 
 
-static void belkin_sa_shutdown (struct usb_serial *serial)
+static void belkin_sa_shutdown(struct usb_serial *serial)
 {
 	struct belkin_sa_private *priv;
 	int i;
@@ -206,7 +204,7 @@
 }
 
 
-static int  belkin_sa_open (struct usb_serial_port *port, struct file *filp)
+static int  belkin_sa_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp)
 {
 	int retval = 0;
 
@@ -235,7 +233,8 @@
 } /* belkin_sa_open */
 
 
-static void belkin_sa_close (struct usb_serial_port *port, struct file *filp)
+static void belkin_sa_close (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s port %d", __func__, port->number);
 
@@ -246,7 +245,7 @@
 } /* belkin_sa_close */
 
 
-static void belkin_sa_read_int_callback (struct urb *urb)
+static void belkin_sa_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct belkin_sa_private *priv;
@@ -311,7 +310,7 @@
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
-		tty = port->tty;
+		tty = port->port.tty;
 		/* Overrun Error */
 		if (priv->last_lsr & BELKIN_SA_LSR_OE) {
 		}
@@ -334,7 +333,8 @@
 		     __func__, retval);
 }
 
-static void belkin_sa_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void belkin_sa_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
@@ -347,7 +347,7 @@
 	unsigned long control_state;
 	int bad_flow_control;
 	speed_t baud;
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	
 	iflag = termios->c_iflag;
 	cflag = termios->c_cflag;
@@ -377,7 +377,7 @@
 		}
 	}
 
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 	if (baud) {
 		urb_value = BELKIN_SA_BAUD(baud);
 		/* Clip to maximum speed */
@@ -387,7 +387,7 @@
 		baud = BELKIN_SA_BAUD(urb_value);
 
 		/* Report the actual baud rate back to the caller */
-		tty_encode_baud_rate(port->tty, baud, baud);
+		tty_encode_baud_rate(tty, baud, baud);
 		if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
 			err("Set baudrate error");
 	} else {
@@ -463,8 +463,9 @@
 } /* belkin_sa_set_termios */
 
 
-static void belkin_sa_break_ctl( struct usb_serial_port *port, int break_state )
+static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 
 	if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
@@ -472,8 +473,9 @@
 }
 
 
-static int belkin_sa_tiocmget (struct usb_serial_port *port, struct file *file)
+static int belkin_sa_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
 	unsigned long control_state;
 	unsigned long flags;
@@ -488,9 +490,10 @@
 }
 
 
-static int belkin_sa_tiocmset (struct usb_serial_port *port, struct file *file,
+static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
 	unsigned long control_state;
@@ -540,29 +543,7 @@
 }
 
 
-static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-		return( 0 );
-
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		/* TODO */
-		return 0;
-
-	default:
-		dbg("belkin_sa_ioctl arg not supported - 0x%04x",cmd);
-		return(-ENOIOCTLCMD);
-		break;
-	}
-	return 0;
-} /* belkin_sa_ioctl */
-
-
-static int __init belkin_sa_init (void)
+static int __init belkin_sa_init(void)
 {
 	int retval;
 	retval = usb_serial_register(&belkin_device);
@@ -583,7 +564,7 @@
 static void __exit belkin_sa_exit (void)
 {
 	usb_deregister (&belkin_driver);
-	usb_serial_deregister (&belkin_device);
+	usb_serial_deregister(&belkin_device);
 }
 
 
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 1f7c86b..f61e3ca 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -232,7 +232,8 @@
 }
 
 /* open this device, set default parameters */
-static int ch341_open(struct usb_serial_port *port, struct file *filp)
+static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct ch341_private *priv = usb_get_serial_port_data(serial->port[0]);
@@ -256,7 +257,7 @@
 	if (r)
 		goto out;
 
-	r = usb_serial_generic_open(port, filp);
+	r = usb_serial_generic_open(tty, port, filp);
 
 out:	return r;
 }
@@ -264,11 +265,10 @@
 /* Old_termios contains the original termios settings and
  * tty->termios contains the new setting to be used.
  */
-static void ch341_set_termios(struct usb_serial_port *port,
-			      struct ktermios *old_termios)
+static void ch341_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct ch341_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned baud_rate;
 
 	dbg("ch341_set_termios()");
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 201184c..940f5de 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -145,12 +145,12 @@
 	}
 
 	port = serial->port[0];
-	port->tty = NULL;
+	port->port.tty = NULL;
 
 	info->port = port;
 	 
-	++port->open_count;
-	if (port->open_count == 1) {
+	++port->port.count;
+	if (port->port.count == 1) {
 		if (serial->type->set_termios) {
 			/*
 			 * allocate a fake tty so the driver can initialize
@@ -171,15 +171,15 @@
 			}
 			memset(&dummy, 0, sizeof(struct ktermios));
 			tty->termios = termios;
-			port->tty = tty;
+			port->port.tty = tty;
 		}
 
 		/* only call the device specific open if this 
 		 * is the first time the port is opened */
 		if (serial->type->open)
-			retval = serial->type->open(port, NULL);
+			retval = serial->type->open(NULL, port, NULL);
 		else
-			retval = usb_serial_generic_open(port, NULL);
+			retval = usb_serial_generic_open(NULL, port, NULL);
 
 		if (retval) {
 			err("could not open USB console port");
@@ -188,9 +188,9 @@
 
 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
-			serial->type->set_termios(port, &dummy);
+			serial->type->set_termios(NULL, port, &dummy);
 
-			port->tty = NULL;
+			port->port.tty = NULL;
 			kfree(termios);
 			kfree(tty);
 		}
@@ -203,11 +203,11 @@
 	return retval;
 free_termios:
 	kfree(termios);
-	port->tty = NULL;
+	port->port.tty = NULL;
 free_tty:
 	kfree(tty);
 reset_open_count:
-	port->open_count = 0;
+	port->port.count = 0;
 goto out;
 }
 
@@ -227,7 +227,7 @@
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	if (!port->open_count) {
+	if (!port->port.count) {
 		dbg ("%s - port not opened", __func__);
 		return;
 	}
@@ -245,17 +245,17 @@
 		}
 		/* pass on to the driver specific version of this function if it is available */
 		if (serial->type->write)
-			retval = serial->type->write(port, buf, i);
+			retval = serial->type->write(NULL, port, buf, i);
 		else
-			retval = usb_serial_generic_write(port, buf, i);
+			retval = usb_serial_generic_write(NULL, port, buf, i);
 		dbg("%s - return value : %d", __func__, retval);
 		if (lf) {
 			/* append CR after LF */
 			unsigned char cr = 13;
 			if (serial->type->write)
-				retval = serial->type->write(port, &cr, 1);
+				retval = serial->type->write(NULL, port, &cr, 1);
 			else
-				retval = usb_serial_generic_write(port, &cr, 1);
+				retval = usb_serial_generic_write(NULL, port, &cr, 1);
 			dbg("%s - return value : %d", __func__, retval);
 		}
 		buf += i;
@@ -306,8 +306,8 @@
 {
 	if (usbcons_info.port) {
 		unregister_console(&usbcons);
-		if (usbcons_info.port->open_count)
-			usbcons_info.port->open_count--;
+		if (usbcons_info.port->port.count)
+			usbcons_info.port->port.count--;
 		usbcons_info.port = NULL;
 	}
 }
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 2bc5576..46c33fc 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -37,15 +37,18 @@
 /*
  * Function Prototypes
  */
-static int cp2101_open(struct usb_serial_port*, struct file*);
-static void cp2101_cleanup(struct usb_serial_port*);
-static void cp2101_close(struct usb_serial_port*, struct file*);
-static void cp2101_get_termios(struct usb_serial_port*);
-static void cp2101_set_termios(struct usb_serial_port*, struct ktermios*);
-static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
-static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
+static int cp2101_open(struct tty_struct *, struct usb_serial_port *,
+							struct file *);
+static void cp2101_cleanup(struct usb_serial_port *);
+static void cp2101_close(struct tty_struct *, struct usb_serial_port *,
+							struct file*);
+static void cp2101_get_termios(struct tty_struct *);
+static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *,
+							struct ktermios*);
+static int cp2101_tiocmget (struct tty_struct *, struct file *);
+static int cp2101_tiocmset (struct tty_struct *, struct file *,
 		unsigned int, unsigned int);
-static void cp2101_break_ctl(struct usb_serial_port*, int);
+static void cp2101_break_ctl(struct tty_struct *, int);
 static int cp2101_startup (struct usb_serial *);
 static void cp2101_shutdown(struct usb_serial*);
 
@@ -182,7 +185,7 @@
  * 'data' is a pointer to a pre-allocated array of integers large
  * enough to hold 'size' bytes (with 4 bytes to each integer)
  */
-static int cp2101_get_config(struct usb_serial_port* port, u8 request,
+static int cp2101_get_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -228,7 +231,7 @@
  * Values less than 16 bits wide are sent directly
  * 'size' is specified in bytes.
  */
-static int cp2101_set_config(struct usb_serial_port* port, u8 request,
+static int cp2101_set_config(struct usb_serial_port *port, u8 request,
 		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
@@ -283,13 +286,14 @@
  * Convenience function for calling cp2101_set_config on single data values
  * without requiring an integer pointer
  */
-static inline int cp2101_set_config_single(struct usb_serial_port* port,
+static inline int cp2101_set_config_single(struct usb_serial_port *port,
 		u8 request, unsigned int data)
 {
 	return cp2101_set_config(port, request, &data, 2);
 }
 
-static int cp2101_open (struct usb_serial_port *port, struct file *filp)
+static int cp2101_open (struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
@@ -318,10 +322,10 @@
 	}
 
 	/* Configure the termios structure */
-	cp2101_get_termios(port);
+	cp2101_get_termios(tty);
 
 	/* Set the DTR and RTS pins low */
-	cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+	cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0);
 
 	return 0;
 }
@@ -341,7 +345,8 @@
 	}
 }
 
-static void cp2101_close (struct usb_serial_port *port, struct file * filp)
+static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -362,19 +367,15 @@
  * from the device, corrects any unsupported values, and configures the
  * termios structure to reflect the state of the device
  */
-static void cp2101_get_termios (struct usb_serial_port *port)
+static void cp2101_get_termios (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int cflag, modem_ctl[4];
 	unsigned int baud;
 	unsigned int bits;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->tty || !port->tty->termios) {
-		dbg("%s - no tty structures", __func__);
-		return;
-	}
-
 	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
 	/* Convert to baudrate */
 	if (baud)
@@ -382,8 +383,8 @@
 
 	dbg("%s - baud rate = %d", __func__, baud);
 
-	tty_encode_baud_rate(port->tty, baud, baud);
-	cflag = port->tty->termios->c_cflag;
+	tty_encode_baud_rate(tty, baud, baud);
+	cflag = tty->termios->c_cflag;
 
 	cp2101_get_config(port, CP2101_BITS, &bits, 2);
 	cflag &= ~CSIZE;
@@ -491,11 +492,11 @@
 		cflag &= ~CRTSCTS;
 	}
 
-	port->tty->termios->c_cflag = cflag;
+	tty->termios->c_cflag = cflag;
 }
 
-static void cp2101_set_termios (struct usb_serial_port *port,
-		struct ktermios *old_termios)
+static void cp2101_set_termios (struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned int cflag, old_cflag;
 	unsigned int baud = 0, bits;
@@ -503,15 +504,13 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->tty || !port->tty->termios) {
-		dbg("%s - no tty structures", __func__);
+	if (!tty)
 		return;
-	}
-	port->tty->termios->c_cflag &= ~CMSPAR;
 
-	cflag = port->tty->termios->c_cflag;
+	tty->termios->c_cflag &= ~CMSPAR;
+	cflag = tty->termios->c_cflag;
 	old_cflag = old_termios->c_cflag;
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 
 	/* If the baud rate is to be updated*/
 	if (baud != tty_termios_baud_rate(old_termios)) {
@@ -554,7 +553,7 @@
 		}
 	}
 	/* Report back the resulting baud rate */
-	tty_encode_baud_rate(port->tty, baud, baud);
+	tty_encode_baud_rate(tty, baud, baud);
 
 	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
@@ -651,9 +650,10 @@
 
 }
 
-static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
+static int cp2101_tiocmset (struct tty_struct *tty, struct file *file,
 		unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control = 0;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -681,8 +681,9 @@
 
 }
 
-static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
+static int cp2101_tiocmget (struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int control;
 	int result;
 
@@ -702,8 +703,9 @@
 	return result;
 }
 
-static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
+static void cp2101_break_ctl (struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int state;
 
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index c164e2c..546178e 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -57,15 +57,18 @@
 #define CYBERJACK_PRODUCT_ID	0x0100
 
 /* Function prototypes */
-static int cyberjack_startup (struct usb_serial *serial);
-static void cyberjack_shutdown (struct usb_serial *serial);
-static int  cyberjack_open (struct usb_serial_port *port, struct file *filp);
-static void cyberjack_close (struct usb_serial_port *port, struct file *filp);
-static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count);
-static int cyberjack_write_room( struct usb_serial_port *port );
-static void cyberjack_read_int_callback (struct urb *urb);
-static void cyberjack_read_bulk_callback (struct urb *urb);
-static void cyberjack_write_bulk_callback (struct urb *urb);
+static int cyberjack_startup(struct usb_serial *serial);
+static void cyberjack_shutdown(struct usb_serial *serial);
+static int  cyberjack_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void cyberjack_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int cyberjack_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+static int cyberjack_write_room( struct tty_struct *tty);
+static void cyberjack_read_int_callback(struct urb *urb);
+static void cyberjack_read_bulk_callback(struct urb *urb);
+static void cyberjack_write_bulk_callback(struct urb *urb);
 
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) },
@@ -111,7 +114,7 @@
 };
 
 /* do some startup allocations not currently performed by usb_serial_probe() */
-static int cyberjack_startup (struct usb_serial *serial)
+static int cyberjack_startup(struct usb_serial *serial)
 {
 	struct cyberjack_private *priv;
 	int i;
@@ -145,7 +148,7 @@
 	return( 0 );
 }
 
-static void cyberjack_shutdown (struct usb_serial *serial)
+static void cyberjack_shutdown(struct usb_serial *serial)
 {
 	int i;
 	
@@ -159,7 +162,8 @@
 	}
 }
 	
-static int  cyberjack_open (struct usb_serial_port *port, struct file *filp)
+static int  cyberjack_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct cyberjack_private *priv;
 	unsigned long flags;
@@ -174,7 +178,8 @@
 	 * the data through, otherwise it is scheduled, and with high
 	 * data rates (like with OHCI) data can get lost.
 	 */
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	priv = usb_get_serial_port_data(port);
 	spin_lock_irqsave(&priv->lock, flags);
@@ -186,7 +191,8 @@
 	return result;
 }
 
-static void cyberjack_close (struct usb_serial_port *port, struct file *filp)
+static void cyberjack_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -197,7 +203,8 @@
 	}
 }
 
-static int cyberjack_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int cyberjack_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
@@ -292,13 +299,13 @@
 	return (count);
 } 
 
-static int cyberjack_write_room( struct usb_serial_port *port )
+static int cyberjack_write_room(struct tty_struct *tty)
 {
 	/* FIXME: .... */
 	return CYBERJACK_LOCAL_BUF_SIZE;
 }
 
-static void cyberjack_read_int_callback( struct urb *urb )
+static void cyberjack_read_int_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
@@ -355,7 +362,7 @@
 	dbg("%s - usb_submit_urb(int urb)", __func__);
 }
 
-static void cyberjack_read_bulk_callback (struct urb *urb)
+static void cyberjack_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
@@ -374,7 +381,7 @@
 		return;
 	}
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - ignoring since device not open\n", __func__);
 		return;
@@ -407,7 +414,7 @@
 	}
 }
 
-static void cyberjack_write_bulk_callback (struct urb *urb)
+static void cyberjack_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	struct cyberjack_private *priv = usb_get_serial_port_data(port);
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 0230d3c..6999d33 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -167,18 +167,18 @@
 static int  cypress_hidcom_startup	(struct usb_serial *serial);
 static int  cypress_ca42v2_startup	(struct usb_serial *serial);
 static void cypress_shutdown		(struct usb_serial *serial);
-static int  cypress_open		(struct usb_serial_port *port, struct file *filp);
-static void cypress_close		(struct usb_serial_port *port, struct file *filp);
-static int  cypress_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  cypress_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void cypress_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  cypress_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
 static void cypress_send		(struct usb_serial_port *port);
-static int  cypress_write_room		(struct usb_serial_port *port);
-static int  cypress_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void cypress_set_termios		(struct usb_serial_port *port, struct ktermios * old);
-static int  cypress_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  cypress_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-static int  cypress_chars_in_buffer	(struct usb_serial_port *port);
-static void cypress_throttle		(struct usb_serial_port *port);
-static void cypress_unthrottle		(struct usb_serial_port *port);
+static int  cypress_write_room		(struct tty_struct *tty);
+static int  cypress_ioctl		(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void cypress_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static int  cypress_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  cypress_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
+static int  cypress_chars_in_buffer	(struct tty_struct *tty);
+static void cypress_throttle		(struct tty_struct *tty);
+static void cypress_unthrottle		(struct tty_struct *tty);
 static void cypress_set_dead		(struct usb_serial_port *port);
 static void cypress_read_int_callback	(struct urb *urb);
 static void cypress_write_int_callback	(struct urb *urb);
@@ -322,8 +322,10 @@
 
 
 /* This function can either set or retrieve the current serial line settings */
-static int cypress_serial_control (struct usb_serial_port *port, speed_t baud_rate, int data_bits, int stop_bits,
-				   int parity_enable, int parity_type, int reset, int cypress_request_type)
+static int cypress_serial_control (struct tty_struct *tty,
+	struct usb_serial_port *port, speed_t baud_rate, int data_bits,
+	int stop_bits, int parity_enable, int parity_type, int reset,
+	int cypress_request_type)
 {
 	int new_baudrate = 0, retval = 0, tries = 0;
 	struct cypress_private *priv;
@@ -395,7 +397,7 @@
 				spin_unlock_irqrestore(&priv->lock, flags);
 				/* If we asked for a speed change encode it */
 				if (baud_rate)
-					tty_encode_baud_rate(port->tty,
+					tty_encode_baud_rate(tty,
 							new_baudrate, new_baudrate);
 			}
 		break;
@@ -611,7 +613,8 @@
 }
 
 
-static int cypress_open (struct usb_serial_port *port, struct file *filp)
+static int cypress_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -636,14 +639,15 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* setting to zero could cause data loss */
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* raise both lines and set termios */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->line_control = CONTROL_DTR | CONTROL_RTS;
 	priv->cmd_ctrl = 1;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	result = cypress_write(port, NULL, 0);
+	result = cypress_write(tty, port, NULL, 0);
 
 	if (result) {
 		dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __func__, result);
@@ -651,7 +655,8 @@
 	} else
 		dbg("%s - success setting the control lines", __func__);
 
-	cypress_set_termios(port, &priv->tmp_termios);
+	if (tty)
+		cypress_set_termios(tty, port, &priv->tmp_termios);
 
 	/* setup the port and start reading from the device */
 	if(!port->interrupt_in_urb){
@@ -674,7 +679,8 @@
 } /* cypress_open */
 
 
-static void cypress_close(struct usb_serial_port *port, struct file * filp)
+static void cypress_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned int c_cflag;
@@ -688,7 +694,7 @@
 	spin_lock_irq(&priv->lock);
 	timeout = CYPRESS_CLOSING_WAIT;
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (cypress_buf_data_avail(priv->buf) == 0
@@ -701,7 +707,7 @@
 		spin_lock_irq(&priv->lock);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	cypress_buf_clear(priv->buf);
 	spin_unlock_irq(&priv->lock);
@@ -713,19 +719,21 @@
 		return;
 	}
 	/* wait for characters to drain from device */
-	bps = tty_get_baud_rate(port->tty);
-	if (bps > 1200)
-		timeout = max((HZ*2560)/bps,HZ/10);
-	else
-		timeout = 2*HZ;
-	schedule_timeout_interruptible(timeout);
+	if (tty) {
+		bps = tty_get_baud_rate(tty);
+		if (bps > 1200)
+			timeout = max((HZ*2560)/bps,HZ/10);
+		else
+			timeout = 2*HZ;
+		schedule_timeout_interruptible(timeout);
+	}
 
 	dbg("%s - stopping urbs", __func__);
 	usb_kill_urb (port->interrupt_in_urb);
 	usb_kill_urb (port->interrupt_out_urb);
 
-	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		if (c_cflag & HUPCL) {
 			/* drop dtr and rts */
 			priv = usb_get_serial_port_data(port);
@@ -733,7 +741,7 @@
 			priv->line_control = 0;
 			priv->cmd_ctrl = 1;
 			spin_unlock_irq(&priv->lock);
-			cypress_write(port, NULL, 0);
+			cypress_write(tty, port, NULL, 0);
 		}
 	}
 
@@ -744,7 +752,8 @@
 } /* cypress_close */
 
 
-static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int cypress_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -878,8 +887,9 @@
 
 
 /* returns how much space is available in the soft buffer */
-static int cypress_write_room(struct usb_serial_port *port)
+static int cypress_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -895,8 +905,9 @@
 }
 
 
-static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
+static int cypress_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	__u8 status, control;
 	unsigned int result = 0;
@@ -922,9 +933,10 @@
 }
 
 
-static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
+static int cypress_tiocmset(struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	
@@ -942,12 +954,14 @@
 	priv->cmd_ctrl = 1;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return cypress_write(port, NULL, 0);
+	return cypress_write(tty, port, NULL, 0);
 }
 
 
-static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int cypress_ioctl(struct tty_struct *tty, struct file * file,
+					unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
@@ -983,22 +997,18 @@
 				}
 			}
 			return 0;
-			break;
 		default:
 			break;
 	}
-
 	dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __func__, cmd);
-
 	return -ENOIOCTLCMD;
 } /* cypress_ioctl */
 
 
-static void cypress_set_termios (struct usb_serial_port *port,
-		struct ktermios *old_termios)
+static void cypress_set_termios(struct tty_struct *tty,
+	struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct cypress_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int data_bits, stop_bits, parity_type, parity_enable;
 	unsigned cflag, iflag;
 	unsigned long flags;
@@ -1007,8 +1017,6 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	tty = port->tty;
-
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
 		if (priv->chiptype == CT_EARTHMATE) {
@@ -1096,13 +1104,13 @@
 			"%d data_bits (+5)", __func__, stop_bits,
 			parity_enable, parity_type, data_bits);
 
-	cypress_serial_control(port, tty_get_baud_rate(tty), data_bits, stop_bits,
+	cypress_serial_control(tty, port, tty_get_baud_rate(tty), data_bits, stop_bits,
 			parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
 
 	/* we perform a CYPRESS_GET_CONFIG so that the current settings are
 	 * filled into the private structure this should confirm that all is
 	 * working if it returns what we just set */
-	cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
+	cypress_serial_control(tty, port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
 
 	/* Here we can define custom tty settings for devices; the main tty
 	 * termios flag base comes from empeg.c */
@@ -1142,14 +1150,15 @@
 	/* if necessary, set lines */
 	if (linechange) {
 		priv->cmd_ctrl = 1;
-		cypress_write(port, NULL, 0);
+		cypress_write(tty, port, NULL, 0);
 	}
 } /* cypress_set_termios */
 
 
 /* returns amount of data still left in soft buffer */
-static int cypress_chars_in_buffer(struct usb_serial_port *port)
+static int cypress_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -1165,8 +1174,9 @@
 }
 
 
-static void cypress_throttle (struct usb_serial_port *port)
+static void cypress_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -1178,8 +1188,9 @@
 }
 
 
-static void cypress_unthrottle (struct usb_serial_port *port)
+static void cypress_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct cypress_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled, result;
 	unsigned long flags;
@@ -1251,7 +1262,7 @@
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1327,7 +1338,7 @@
 					data[i]);
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		}
-		tty_flip_buffer_push(port->tty);
+		tty_flip_buffer_push(port->port.tty);
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -1339,7 +1350,7 @@
 
 	/* Continue trying to always read... unless the port has closed. */
 
-	if (port->open_count > 0 && priv->comm_is_ok) {
+	if (port->port.count > 0 && priv->comm_is_ok) {
 		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
 				usb_rcvintpipe(port->serial->dev,
 					port->interrupt_in_endpointAddress),
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 28bc6fc..dc92dbf 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -15,7 +15,7 @@
 *  Al Borchers (borchers@steinerpoint.com)
 * 
 * (12/03/2001) gkh
-*	switched to using port->open_count instead of private version.
+*	switched to using port->port.count instead of private version.
 *	Removed port->active
 *
 * (04/08/2001) gb
@@ -441,22 +441,23 @@
 	unsigned int modem_signals, int interruptible);
 static int digi_transmit_idle(struct usb_serial_port *port,
 	unsigned long timeout);
-static void digi_rx_throttle (struct usb_serial_port *port);
-static void digi_rx_unthrottle (struct usb_serial_port *port);
-static void digi_set_termios(struct usb_serial_port *port,
-	struct ktermios *old_termios);
-static void digi_break_ctl(struct usb_serial_port *port, int break_state);
-static int digi_ioctl(struct usb_serial_port *port, struct file *file,
-	unsigned int cmd, unsigned long arg);
-static int digi_tiocmget(struct usb_serial_port *port, struct file *file);
-static int digi_tiocmset(struct usb_serial_port *port, struct file *file,
+static void digi_rx_throttle (struct tty_struct *tty);
+static void digi_rx_unthrottle (struct tty_struct *tty);
+static void digi_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
+static void digi_break_ctl(struct tty_struct *tty, int break_state);
+static int digi_tiocmget(struct tty_struct *tty, struct file *file);
+static int digi_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear);
-static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count);
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+	const unsigned char *buf, int count);
 static void digi_write_bulk_callback(struct urb *urb);
-static int digi_write_room(struct usb_serial_port *port);
-static int digi_chars_in_buffer(struct usb_serial_port *port);
-static int digi_open(struct usb_serial_port *port, struct file *filp);
-static void digi_close(struct usb_serial_port *port, struct file *filp);
+static int digi_write_room(struct tty_struct *tty);
+static int digi_chars_in_buffer(struct tty_struct *tty);
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
+	struct file *filp);
+static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
+	struct file *filp);
 static int digi_startup_device(struct usb_serial *serial);
 static int digi_startup(struct usb_serial *serial);
 static void digi_shutdown(struct usb_serial *serial);
@@ -516,7 +517,6 @@
 	.chars_in_buffer =		digi_chars_in_buffer,
 	.throttle =			digi_rx_throttle,
 	.unthrottle =			digi_rx_unthrottle,
-	.ioctl =			digi_ioctl,
 	.set_termios =			digi_set_termios,
 	.break_ctl =			digi_break_ctl,
 	.tiocmget =			digi_tiocmget,
@@ -543,7 +543,6 @@
 	.chars_in_buffer =		digi_chars_in_buffer,
 	.throttle =			digi_rx_throttle,
 	.unthrottle =			digi_rx_unthrottle,
-	.ioctl =			digi_ioctl,
 	.set_termios =			digi_set_termios,
 	.break_ctl =			digi_break_ctl,
 	.tiocmget =			digi_tiocmget,
@@ -604,7 +603,7 @@
 
 static void digi_wakeup_write(struct usb_serial_port *port)
 {
-	tty_wakeup(port->tty);
+	tty_wakeup(port->port.tty);
 }
 
 
@@ -856,9 +855,10 @@
 }
 
 
-static void digi_rx_throttle(struct usb_serial_port *port)
+static void digi_rx_throttle(struct tty_struct *tty)
 {
 	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
 
@@ -872,10 +872,11 @@
 }
 
 
-static void digi_rx_unthrottle(struct usb_serial_port *port)
+static void digi_rx_unthrottle(struct tty_struct *tty)
 {
 	int ret = 0;
 	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
 	dbg("digi_rx_unthrottle: TOP: port=%d", priv->dp_port_num);
@@ -900,12 +901,10 @@
 }
 
 
-static void digi_set_termios(struct usb_serial_port *port,
-					struct ktermios *old_termios)
+static void digi_set_termios(struct tty_struct *tty, 
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-
 	struct digi_port *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned int iflag = tty->termios->c_iflag;
 	unsigned int cflag = tty->termios->c_cflag;
 	unsigned int old_iflag = old_termios->c_iflag;
@@ -1088,8 +1087,9 @@
 }
 
 
-static void digi_break_ctl(struct usb_serial_port *port, int break_state)
+static void digi_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned char buf[4];
 
 	buf[0] = DIGI_CMD_BREAK_CONTROL;
@@ -1100,8 +1100,9 @@
 }
 
 
-static int digi_tiocmget(struct usb_serial_port *port, struct file *file)
+static int digi_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	unsigned int val;
 	unsigned long flags;
@@ -1115,9 +1116,10 @@
 }
 
 
-static int digi_tiocmset(struct usb_serial_port *port, struct file *file,
+static int digi_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	unsigned int val;
 	unsigned long flags;
@@ -1131,27 +1133,8 @@
 }
 
 
-static int digi_ioctl(struct usb_serial_port *port, struct file *file,
-	unsigned int cmd, unsigned long arg)
-{
-	struct digi_port *priv = usb_get_serial_port_data(port);
-	dbg("digi_ioctl: TOP: port=%d, cmd=0x%x", priv->dp_port_num, cmd);
-
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-		return 0;
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		/* TODO */
-		return 0;
-	}
-	return -ENOIOCTLCMD;
-
-}
-
-static int digi_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 
 	int ret,data_len,new_len;
@@ -1261,7 +1244,7 @@
 	/* try to send any buffered data on this port, if it is open */
 	spin_lock(&priv->dp_port_lock);
 	priv->dp_write_urb_in_use = 0;
-	if (port->open_count && port->write_urb->status != -EINPROGRESS
+	if (port->port.count && port->write_urb->status != -EINPROGRESS
 	    && priv->dp_out_buf_len > 0) {
 		*((unsigned char *)(port->write_urb->transfer_buffer))
 			= (unsigned char)DIGI_CMD_SEND_DATA;
@@ -1288,11 +1271,11 @@
 			__func__, ret, priv->dp_port_num);
 }
 
-static int digi_write_room(struct usb_serial_port *port)
+static int digi_write_room(struct tty_struct *tty)
 {
-
-	int room;
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
+	int room;
 	unsigned long flags = 0;
 
 	spin_lock_irqsave(&priv->dp_port_lock, flags);
@@ -1308,12 +1291,11 @@
 
 }
 
-static int digi_chars_in_buffer(struct usb_serial_port *port)
+static int digi_chars_in_buffer(struct tty_struct *tty)
 {
-
+	struct usb_serial_port *port = tty->driver_data;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
-
 	if (port->write_urb->status == -EINPROGRESS
 	    || priv->dp_write_urb_in_use) {
 		dbg("digi_chars_in_buffer: port=%d, chars=%d",
@@ -1329,7 +1311,8 @@
 }
 
 
-static int digi_open(struct usb_serial_port *port, struct file *filp)
+static int digi_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	int ret;
 	unsigned char buf[32];
@@ -1338,7 +1321,7 @@
 	unsigned long flags = 0;
 
 	dbg("digi_open: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->open_count);
+		priv->dp_port_num, port->port.count);
 
 	/* be sure the device is started up */
 	if (digi_startup_device(port->serial) != 0)
@@ -1380,9 +1363,11 @@
 		dbg("digi_open: write oob failed, ret=%d", ret);
 
 	/* set termios settings */
-	not_termios.c_cflag = ~port->tty->termios->c_cflag;
-	not_termios.c_iflag = ~port->tty->termios->c_iflag;
-	digi_set_termios(port, &not_termios);
+	if (tty) {
+		not_termios.c_cflag = ~tty->termios->c_cflag;
+		not_termios.c_iflag = ~tty->termios->c_iflag;
+		digi_set_termios(tty, port, &not_termios);
+	}
 
 	/* set DTR and RTS */
 	digi_set_modem_signals(port, TIOCM_DTR|TIOCM_RTS, 1);
@@ -1391,16 +1376,16 @@
 }
 
 
-static void digi_close(struct usb_serial_port *port, struct file *filp)
+static void digi_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	DEFINE_WAIT(wait);
 	int ret;
 	unsigned char buf[32];
-	struct tty_struct *tty = port->tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 
 	dbg("digi_close: TOP: port=%d, open_count=%d",
-		priv->dp_port_num, port->open_count);
+		priv->dp_port_num, port->port.count);
 
 	mutex_lock(&port->serial->disc_mutex);
 	/* if disconnected, just clear flags */
@@ -1663,7 +1648,7 @@
 {
 
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
 	int len = ((unsigned char *)urb->transfer_buffer)[1];
@@ -1675,7 +1660,7 @@
 
 	/* do not process callbacks on closed ports */
 	/* but do continue the read chain */
-	if (port->open_count == 0)
+	if (port->port.count == 0)
 		return 0;
 
 	/* short/multiple packet check */
@@ -1785,17 +1770,17 @@
 			if (val & DIGI_READ_INPUT_SIGNALS_CTS) {
 				priv->dp_modem_signals |= TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->open_count
-					&& port->tty->termios->c_cflag & CRTSCTS) {
-					port->tty->hw_stopped = 0;
+				if (port->port.count
+					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+					port->port.tty->hw_stopped = 0;
 					digi_wakeup_write(port);
 				}
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
-				if (port->open_count
-					&& port->tty->termios->c_cflag & CRTSCTS) {
-					port->tty->hw_stopped = 1;
+				if (port->port.count
+					&& port->port.tty->termios->c_cflag & CRTSCTS) {
+					port->port.tty->hw_stopped = 1;
 				}
 			}
 			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index c5ec309..47ebdf5 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -31,7 +31,7 @@
  *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
  * 
  * (12/03/2000) gb
- *	Added port->tty->ldisc.set_termios(port->tty, NULL) to empeg_open()
+ *	Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to empeg_open()
  *	This notifies the tty driver that the termios have changed.
  * 
  * (11/13/2000) gb
@@ -77,22 +77,18 @@
 #define EMPEG_PRODUCT_ID		0x0001
 
 /* function prototypes for an empeg-car player */
-static int  empeg_open			(struct usb_serial_port *port, struct file *filp);
-static void empeg_close			(struct usb_serial_port *port, struct file *filp);
-static int  empeg_write			(struct usb_serial_port *port,
+static int  empeg_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void empeg_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  empeg_write			(struct tty_struct *tty, struct usb_serial_port *port,
 					const unsigned char *buf,
 					int count);
-static int  empeg_write_room		(struct usb_serial_port *port);
-static int  empeg_chars_in_buffer	(struct usb_serial_port *port);
-static void empeg_throttle		(struct usb_serial_port *port);
-static void empeg_unthrottle		(struct usb_serial_port *port);
+static int  empeg_write_room		(struct tty_struct *tty);
+static int  empeg_chars_in_buffer	(struct tty_struct *tty);
+static void empeg_throttle		(struct tty_struct *tty);
+static void empeg_unthrottle		(struct tty_struct *tty);
 static int  empeg_startup		(struct usb_serial *serial);
 static void empeg_shutdown		(struct usb_serial *serial);
-static int  empeg_ioctl			(struct usb_serial_port *port,
-					struct file * file,
-					unsigned int cmd,
-					unsigned long arg);
-static void empeg_set_termios		(struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
 static void empeg_write_bulk_callback	(struct urb *urb);
 static void empeg_read_bulk_callback	(struct urb *urb);
 
@@ -125,7 +121,6 @@
 	.unthrottle =		empeg_unthrottle,
 	.attach =		empeg_startup,
 	.shutdown =		empeg_shutdown,
-	.ioctl =		empeg_ioctl,
 	.set_termios =		empeg_set_termios,
 	.write =		empeg_write,
 	.write_room =		empeg_write_room,
@@ -145,7 +140,8 @@
 /******************************************************************************
  * Empeg specific driver functions
  ******************************************************************************/
-static int empeg_open (struct usb_serial_port *port, struct file *filp)
+static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
@@ -153,7 +149,7 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	/* Force default termio settings */
-	empeg_set_termios (port, NULL) ;
+	empeg_set_termios (tty, port, NULL) ;
 
 	bytes_in = 0;
 	bytes_out = 0;
@@ -178,7 +174,8 @@
 }
 
 
-static void empeg_close (struct usb_serial_port *port, struct file * filp)
+static void empeg_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -189,7 +186,7 @@
 }
 
 
-static int empeg_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	struct urb *urb;
@@ -203,7 +200,6 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	while (count > 0) {
-
 		/* try to find a free urb in our list of them */
 		urb = NULL;
 
@@ -262,15 +258,14 @@
 		bytes_out += transfer_size;
 
 	}
-
 exit:
 	return bytes_sent;
-
 } 
 
 
-static int empeg_write_room (struct usb_serial_port *port)
+static int empeg_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 	int i;
 	int room = 0;
@@ -278,25 +273,22 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave (&write_urb_pool_lock, flags);
-
 	/* tally up the number of bytes available */
 	for (i = 0; i < NUM_URBS; ++i) {
 		if (write_urb_pool[i]->status != -EINPROGRESS) {
 			room += URB_TRANSFER_BUFFER_SIZE;
 		}
 	} 
-
 	spin_unlock_irqrestore (&write_urb_pool_lock, flags);
-
 	dbg("%s - returns %d", __func__, room);
-
-	return (room);
+	return room;
 
 }
 
 
-static int empeg_chars_in_buffer (struct usb_serial_port *port)
+static int empeg_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 	int i;
 	int chars = 0;
@@ -356,7 +348,7 @@
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 
 	if (urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
@@ -386,27 +378,24 @@
 }
 
 
-static void empeg_throttle (struct usb_serial_port *port)
+static void empeg_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
 }
 
 
-static void empeg_unthrottle (struct usb_serial_port *port)
+static void empeg_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int result;
-
 	dbg("%s - port %d", __func__, port->number);
 
 	port->read_urb->dev = port->serial->dev;
-
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
-
 	if (result)
 		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
-
-	return;
 }
 
 
@@ -436,17 +425,10 @@
 }
 
 
-static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static void empeg_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
-
-	return -ENOIOCTLCMD;
-}
-
-
-static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
-{
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	dbg("%s - port %d", __func__, port->number);
 
 	/*
@@ -491,8 +473,8 @@
 	 * this is bad as it opens up the possibility of dropping bytes
 	 * on the floor.  We don't want to drop bytes on the floor. :)
 	 */
-	port->tty->low_latency = 1;
-	tty_encode_baud_rate(port->tty, 115200, 115200);
+	tty->low_latency = 1;
+	tty_encode_baud_rate(tty, 115200, 115200);
 }
 
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 0ff4a39..abbb447 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -682,21 +682,21 @@
 static void ftdi_shutdown		(struct usb_serial *serial);
 static int  ftdi_sio_port_probe	(struct usb_serial_port *port);
 static int  ftdi_sio_port_remove	(struct usb_serial_port *port);
-static int  ftdi_open			(struct usb_serial_port *port, struct file *filp);
-static void ftdi_close			(struct usb_serial_port *port, struct file *filp);
-static int  ftdi_write			(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  ftdi_write_room		(struct usb_serial_port *port);
-static int  ftdi_chars_in_buffer	(struct usb_serial_port *port);
+static int  ftdi_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void ftdi_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  ftdi_write			(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  ftdi_write_room		(struct tty_struct *tty);
+static int  ftdi_chars_in_buffer	(struct tty_struct *tty);
 static void ftdi_write_bulk_callback	(struct urb *urb);
 static void ftdi_read_bulk_callback	(struct urb *urb);
 static void ftdi_process_read		(struct work_struct *work);
-static void ftdi_set_termios		(struct usb_serial_port *port, struct ktermios * old);
-static int  ftdi_tiocmget               (struct usb_serial_port *port, struct file *file);
-static int  ftdi_tiocmset		(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
-static int  ftdi_ioctl			(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void ftdi_break_ctl		(struct usb_serial_port *port, int break_state );
-static void ftdi_throttle		(struct usb_serial_port *port);
-static void ftdi_unthrottle		(struct usb_serial_port *port);
+static void ftdi_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static int  ftdi_tiocmget               (struct tty_struct *tty, struct file *file);
+static int  ftdi_tiocmset		(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear);
+static int  ftdi_ioctl			(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void ftdi_break_ctl		(struct tty_struct *tty, int break_state );
+static void ftdi_throttle		(struct tty_struct *tty);
+static void ftdi_unthrottle		(struct tty_struct *tty);
 
 static unsigned short int ftdi_232am_baud_base_to_divisor (int baud, int base);
 static unsigned short int ftdi_232am_baud_to_divisor (int baud);
@@ -843,42 +843,7 @@
 }
 
 
-static __u32 get_ftdi_divisor(struct usb_serial_port * port);
-
-
-static int change_speed(struct usb_serial_port *port)
-{
-	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	char *buf;
-        __u16 urb_value;
-	__u16 urb_index;
-	__u32 urb_index_value;
-	int rv;
-
-	buf = kmalloc(1, GFP_NOIO);
-	if (!buf)
-		return -ENOMEM;
-
-	urb_index_value = get_ftdi_divisor(port);
-	urb_value = (__u16)urb_index_value;
-	urb_index = (__u16)(urb_index_value >> 16);
-	if (priv->interface) {	/* FT2232C */
-		urb_index = (__u16)((urb_index << 8) | priv->interface);
-	}
-
-	rv = usb_control_msg(port->serial->dev,
-			    usb_sndctrlpipe(port->serial->dev, 0),
-			    FTDI_SIO_SET_BAUDRATE_REQUEST,
-			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
-			    urb_value, urb_index,
-			    buf, 0, WDR_SHORT_TIMEOUT);
-
-	kfree(buf);
-	return rv;
-}
-
-
-static __u32 get_ftdi_divisor(struct usb_serial_port * port)
+static __u32 get_ftdi_divisor(struct tty_struct *tty, struct usb_serial_port *port)
 { /* get_ftdi_divisor */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u32 div_value = 0;
@@ -910,7 +875,7 @@
 
 	/* 1. Get the baud rate from the tty settings, this observes alt_speed hack */
 
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 	dbg("%s - tty_get_baud_rate reports speed %d", __func__, baud);
 
 	/* 2. Observe async-compatible custom_divisor hack, update baudrate if needed */
@@ -976,10 +941,42 @@
 			ftdi_chip_name[priv->chip_type]);
 	}
 
-	tty_encode_baud_rate(port->tty, baud, baud);
+	tty_encode_baud_rate(tty, baud, baud);
 	return(div_value);
 }
 
+static int change_speed(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	char *buf;
+        __u16 urb_value;
+	__u16 urb_index;
+	__u32 urb_index_value;
+	int rv;
+
+	buf = kmalloc(1, GFP_NOIO);
+	if (!buf)
+		return -ENOMEM;
+
+	urb_index_value = get_ftdi_divisor(tty, port);
+	urb_value = (__u16)urb_index_value;
+	urb_index = (__u16)(urb_index_value >> 16);
+	if (priv->interface) {	/* FT2232C */
+		urb_index = (__u16)((urb_index << 8) | priv->interface);
+	}
+
+	rv = usb_control_msg(port->serial->dev,
+			    usb_sndctrlpipe(port->serial->dev, 0),
+			    FTDI_SIO_SET_BAUDRATE_REQUEST,
+			    FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE,
+			    urb_value, urb_index,
+			    buf, 0, WDR_SHORT_TIMEOUT);
+
+	kfree(buf);
+	return rv;
+}
+
+
 
 static int get_serial_info(struct usb_serial_port * port, struct serial_struct __user * retinfo)
 {
@@ -998,7 +995,8 @@
 } /* get_serial_info */
 
 
-static int set_serial_info(struct usb_serial_port * port, struct serial_struct __user * newinfo)
+static int set_serial_info(struct tty_struct *tty,
+	struct usb_serial_port * port, struct serial_struct __user * newinfo)
 { /* set_serial_info */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	struct serial_struct new_serial;
@@ -1030,30 +1028,29 @@
 	               (new_serial.flags & ASYNC_FLAGS));
 	priv->custom_divisor = new_serial.custom_divisor;
 
-	port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 check_and_exit:
 	if ((old_priv.flags & ASYNC_SPD_MASK) !=
 	     (priv->flags & ASYNC_SPD_MASK)) {
 		if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			port->tty->alt_speed = 57600;
+			tty->alt_speed = 57600;
 		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			port->tty->alt_speed = 115200;
+			tty->alt_speed = 115200;
 		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			port->tty->alt_speed = 230400;
+			tty->alt_speed = 230400;
 		else if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			port->tty->alt_speed = 460800;
+			tty->alt_speed = 460800;
 		else
-			port->tty->alt_speed = 0;
+			tty->alt_speed = 0;
 	}
 	if (((old_priv.flags & ASYNC_SPD_MASK) !=
 	     (priv->flags & ASYNC_SPD_MASK)) ||
 	    (((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST) &&
 	     (old_priv.custom_divisor != priv->custom_divisor))) {
-		change_speed(port);
+		change_speed(tty, port);
 	}
-
-	return (0);
+	return 0;
 
 } /* set_serial_info */
 
@@ -1415,7 +1412,8 @@
 	return 0;
 }
 
-static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
+static int ftdi_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 { /* ftdi_open */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1433,8 +1431,8 @@
 	priv->rx_bytes = 0;
 	spin_unlock_irqrestore(&priv->rx_lock, flags);
 
-	if (port->tty)
-		port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	if (tty)
+		tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	/* No error checking for this (will get errors later anyway) */
 	/* See ftdi_sio.h for description of what is reset */
@@ -1448,8 +1446,8 @@
 	   This is same behaviour as serial.c/rs_open() - Kuba */
 
 	/* ftdi_set_termios  will send usb control messages */
-	if (port->tty)
-		ftdi_set_termios(port, port->tty->termios);
+	if (tty)
+		ftdi_set_termios(tty, port, tty->termios);
 
 	/* FIXME: Flow control might be enabled, so it should be checked -
 	   we have no control of defaults! */
@@ -1485,9 +1483,10 @@
  *
  */
 
-static void ftdi_close (struct usb_serial_port *port, struct file *filp)
+static void ftdi_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 { /* ftdi_close */
-	unsigned int c_cflag = port->tty->termios->c_cflag;
+	unsigned int c_cflag = tty->termios->c_cflag;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	char buf[1];
 
@@ -1527,7 +1526,7 @@
  *
  * The new devices do not require this byte
  */
-static int ftdi_write (struct usb_serial_port *port,
+static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 			   const unsigned char *buf, int count)
 { /* ftdi_write */
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1686,8 +1685,9 @@
 } /* ftdi_write_bulk_callback */
 
 
-static int ftdi_write_room( struct usb_serial_port *port )
+static int ftdi_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int room;
 	unsigned long flags;
@@ -1707,11 +1707,11 @@
 	}
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	return room;
-} /* ftdi_write_room */
+}
 
-
-static int ftdi_chars_in_buffer (struct usb_serial_port *port)
-{ /* ftdi_chars_in_buffer */
+static int ftdi_chars_in_buffer(struct tty_struct *tty)
+{
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int buffered;
 	unsigned long flags;
@@ -1726,12 +1726,10 @@
 		buffered = 0;
 	}
 	return buffered;
-} /* ftdi_chars_in_buffer */
+}
 
-
-
-static void ftdi_read_bulk_callback (struct urb *urb)
-{ /* ftdi_read_bulk_callback */
+static void ftdi_read_bulk_callback(struct urb *urb)
+{
 	struct usb_serial_port *port = urb->context;
 	struct tty_struct *tty;
 	struct ftdi_private *priv;
@@ -1747,10 +1745,10 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->open_count <= 0)
+	if (port->port.count <= 0)
 		return;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting",__func__);
 		return;
@@ -1803,10 +1801,10 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (port->open_count <= 0)
+	if (port->port.count <= 0)
 		return;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting",__func__);
 		return;
@@ -1954,7 +1952,7 @@
 		}
 		spin_unlock_irqrestore(&priv->rx_lock, flags);
 		/* if the port is closed stop trying to read */
-		if (port->open_count > 0){
+		if (port->port.count > 0){
 			/* delay processing of remainder */
 			schedule_delayed_work(&priv->rx_work, 1);
 		} else {
@@ -1967,7 +1965,7 @@
 	priv->rx_processed = 0;
 
 	/* if the port is closed stop trying to read */
-	if (port->open_count > 0){
+	if (port->port.count > 0){
 		/* Continue trying to always read  */
 		usb_fill_bulk_urb(port->read_urb, port->serial->dev,
 			      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
@@ -1983,8 +1981,9 @@
 } /* ftdi_process_read */
 
 
-static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
+static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	__u16 urb_value = 0;
 	char buf[1];
@@ -2018,11 +2017,12 @@
  * WARNING: set_termios calls this with old_termios in kernel space
  */
 
-static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void ftdi_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 { /* ftdi_termios */
 	struct usb_device *dev = port->serial->dev;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	__u16 urb_value; /* will hold the new flags */
 	char buf[1]; /* Perhaps I should dynamically alloc this? */
@@ -2037,7 +2037,7 @@
 	/* Force baud rate if this device requires it, unless it is set to B0. */
 	if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) {
 		dbg("%s: forcing baud rate for this device", __func__);
-		tty_encode_baud_rate(port->tty, priv->force_baud,
+		tty_encode_baud_rate(tty, priv->force_baud,
 					priv->force_baud);
 	}
 
@@ -2104,7 +2104,7 @@
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
-		if (change_speed(port)) {
+		if (change_speed(tty, port)) {
 			err("%s urb failed to set baudrate", __func__);
 		}
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
@@ -2168,11 +2168,11 @@
 
 	}
 	return;
-} /* ftdi_termios */
+}
 
-
-static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
+static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned char buf[2];
 	int ret;
@@ -2221,15 +2221,18 @@
 		priv->last_dtr_rts;
 }
 
-static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
+static int ftdi_tiocmset(struct tty_struct *tty, struct file * file,
+			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s TIOCMSET", __func__);
 	return update_mctrl(port, set, clear);
 }
 
 
-static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int ftdi_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
 	dbg("%s cmd 0x%04x", __func__, cmd);
@@ -2241,7 +2244,7 @@
 		return get_serial_info(port, (struct serial_struct __user *) arg);
 
 	case TIOCSSERIAL: /* sets serial port data */
-		return set_serial_info(port, (struct serial_struct __user *) arg);
+		return set_serial_info(tty, port, (struct serial_struct __user *) arg);
 
 	/*
 	 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
@@ -2280,25 +2283,20 @@
 				 */
 			}
 		}
-		return(0);
-		break;
+		return 0;
 	default:
 		break;
-
 	}
-
-
 	/* This is not necessarily an error - turns out the higher layers will do
 	 *  some ioctls itself (see comment above)
 	 */
 	dbg("%s arg not supported - it was 0x%04x - check /usr/include/asm/ioctls.h", __func__, cmd);
+	return -ENOIOCTLCMD;
+}
 
-	return(-ENOIOCTLCMD);
-} /* ftdi_ioctl */
-
-
-static void ftdi_throttle (struct usb_serial_port *port)
+static void ftdi_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -2310,8 +2308,9 @@
 }
 
 
-static void ftdi_unthrottle (struct usb_serial_port *port)
+static void ftdi_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 	int actually_throttled;
 	unsigned long flags;
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 8ce5a56..06cfa43 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -275,7 +275,7 @@
 static void send_to_tty(struct usb_serial_port *port,
 			char *data, unsigned int actual_length)
 {
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 
 	if (tty && actual_length) {
 
@@ -970,7 +970,8 @@
 
 
 
-static int garmin_open (struct usb_serial_port *port, struct file *filp)
+static int garmin_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	unsigned long flags;
 	int status = 0;
@@ -983,8 +984,8 @@
 	 * through, otherwise it is scheduled, and with high data rates (like
 	 * with OHCI) data can get lost.
 	 */
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	spin_lock_irqsave(&garmin_data_p->lock, flags);
 	garmin_data_p->mode  = initial_mode;
@@ -998,17 +999,16 @@
 	usb_kill_urb (port->write_urb);
 	usb_kill_urb (port->read_urb);
 
-	if (garmin_data_p->state == STATE_RESET) {
+	if (garmin_data_p->state == STATE_RESET)
 		status = garmin_init_session(port);
-	}
 
 	garmin_data_p->state = STATE_ACTIVE;
-
 	return status;
 }
 
 
-static void garmin_close (struct usb_serial_port *port, struct file * filp)
+static void garmin_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1042,7 +1042,6 @@
 	mutex_unlock(&port->serial->disc_mutex);
 }
 
-
 static void garmin_write_bulk_callback (struct urb *urb)
 {
 	unsigned long flags;
@@ -1145,10 +1144,8 @@
 	return count;
 }
 
-
-
-static int garmin_write (struct usb_serial_port *port,
-			 const unsigned char *buf, int count)
+static int garmin_write (struct tty_struct *tty, struct usb_serial_port *port,
+					 const unsigned char *buf, int count)
 {
 	int pktid, pktsiz, len;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1158,7 +1155,6 @@
 
 	/* check for our private packets */
 	if (count >= GARMIN_PKTHDR_LENGTH) {
-
 		len = PRIVPKTSIZ;
 		if (count < len)
 			len = count;
@@ -1226,8 +1222,9 @@
 }
 
 
-static int garmin_write_room (struct usb_serial_port *port)
+static int garmin_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	/*
 	 * Report back the bytes currently available in the output buffer.
 	 */
@@ -1236,20 +1233,6 @@
 }
 
 
-static int garmin_chars_in_buffer (struct usb_serial_port *port)
-{
-	/*
-	 * Report back the number of bytes currently in our input buffer.
-	 * Will this lock up the driver - the buffer contains an incomplete
-	 * package which will not be written to the device until it
-	 * has been completed ?
-	 */
-	//struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
-	//return garmin_data_p->insize;
-	return 0;
-}
-
-
 static void garmin_read_process(struct garmin_data * garmin_data_p,
 				 unsigned char *data, unsigned data_length)
 {
@@ -1468,10 +1451,11 @@
 }
 
 
-static void garmin_throttle (struct usb_serial_port *port)
+static void garmin_throttle(struct tty_struct *tty)
 {
-	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
 	/* set flag, data received will be put into a queue
@@ -1482,10 +1466,11 @@
 }
 
 
-static void garmin_unthrottle (struct usb_serial_port *port)
+static void garmin_unthrottle (struct tty_struct *tty)
 {
-	unsigned long flags;
+	struct usb_serial_port *port = tty->driver_data;
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
+	unsigned long flags;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1507,8 +1492,6 @@
 	}
 }
 
-
-
 /*
  * The timer is currently only used to send queued packets to
  * the tty in cases where the protocol provides no own handshaking
@@ -1526,7 +1509,7 @@
 
 
 
-static int garmin_attach (struct usb_serial *serial)
+static int garmin_attach(struct usb_serial *serial)
 {
 	int status = 0;
 	struct usb_serial_port *port = serial->port[0];
@@ -1556,7 +1539,7 @@
 }
 
 
-static void garmin_shutdown (struct usb_serial *serial)
+static void garmin_shutdown(struct usb_serial *serial)
 {
 	struct usb_serial_port *port = serial->port[0];
 	struct garmin_data * garmin_data_p = usb_get_serial_port_data(port);
@@ -1588,7 +1571,6 @@
 	.shutdown            = garmin_shutdown,
 	.write               = garmin_write,
 	.write_room          = garmin_write_room,
-	.chars_in_buffer     = garmin_chars_in_buffer,
 	.write_bulk_callback = garmin_write_bulk_callback,
 	.read_bulk_callback  = garmin_read_bulk_callback,
 	.read_int_callback   = garmin_read_int_callback,
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index 537f12a..5128018 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -112,7 +112,8 @@
 #endif
 }
 
-int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
+int usb_serial_generic_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	int result = 0;
@@ -123,8 +124,8 @@
 	/* force low_latency on so that our tty_push actually forces the data through, 
 	   otherwise it is scheduled, and with high data rates (like with OHCI) data
 	   can get lost. */
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* clear the throttle flags */
 	spin_lock_irqsave(&port->lock, flags);
@@ -152,7 +153,7 @@
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
-static void generic_cleanup (struct usb_serial_port *port)
+static void generic_cleanup(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 
@@ -182,7 +183,7 @@
 #endif
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
-		if (port->open_count && port->read_urb) {
+		if (port->port.count && port->read_urb) {
 			r = usb_submit_urb(port->read_urb, GFP_NOIO);
 			if (r < 0)
 				c++;
@@ -192,13 +193,15 @@
 	return c ? -EIO : 0;
 }
 
-void usb_serial_generic_close (struct usb_serial_port *port, struct file * filp)
+void usb_serial_generic_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 	generic_cleanup (port);
 }
 
-int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+int usb_serial_generic_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	int result;
@@ -255,8 +258,9 @@
 	return 0;
 }
 
-int usb_serial_generic_write_room (struct usb_serial_port *port)
+int usb_serial_generic_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int room = 0;
 
@@ -272,8 +276,9 @@
 	return room;
 }
 
-int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port)
+int usb_serial_generic_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int chars = 0;
 
@@ -286,7 +291,7 @@
 	}
 
 	dbg("%s - returns %d", __func__, chars);
-	return (chars);
+	return chars;
 }
 
 
@@ -311,10 +316,10 @@
 }
 
 /* Push data to tty layer and resubmit the bulk read URB */
-static void flush_and_resubmit_read_urb (struct usb_serial_port *port)
+static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 {
 	struct urb *urb = port->read_urb;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 	int room;
 
 	/* Push data to tty */
@@ -329,7 +334,7 @@
 	resubmit_read_urb(port, GFP_ATOMIC);
 }
 
-void usb_serial_generic_read_bulk_callback (struct urb *urb)
+void usb_serial_generic_read_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	unsigned char *data = urb->transfer_buffer;
@@ -357,7 +362,7 @@
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback);
 
-void usb_serial_generic_write_bulk_callback (struct urb *urb)
+void usb_serial_generic_write_bulk_callback(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
 	int status = urb->status;
@@ -374,8 +379,9 @@
 }
 EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback);
 
-void usb_serial_generic_throttle (struct usb_serial_port *port)
+void usb_serial_generic_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -387,8 +393,9 @@
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-void usb_serial_generic_unthrottle (struct usb_serial_port *port)
+void usb_serial_generic_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int was_throttled;
 	unsigned long flags;
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 2fd449b..29346d7 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -206,18 +206,18 @@
 static void edge_bulk_out_cmd_callback	(struct urb *urb);
 
 /* function prototypes for the usbserial callbacks */
-static int  edge_open			(struct usb_serial_port *port, struct file *filp);
-static void edge_close			(struct usb_serial_port *port, struct file *filp);
-static int  edge_write			(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  edge_write_room		(struct usb_serial_port *port);
-static int  edge_chars_in_buffer	(struct usb_serial_port *port);
-static void edge_throttle		(struct usb_serial_port *port);
-static void edge_unthrottle		(struct usb_serial_port *port);
-static void edge_set_termios		(struct usb_serial_port *port, struct ktermios *old_termios);
-static int  edge_ioctl			(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
-static void edge_break			(struct usb_serial_port *port, int break_state);
-static int  edge_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  edge_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
+static int  edge_open			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void edge_close			(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  edge_write			(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  edge_write_room		(struct tty_struct *tty);
+static int  edge_chars_in_buffer	(struct tty_struct *tty);
+static void edge_throttle		(struct tty_struct *tty);
+static void edge_unthrottle		(struct tty_struct *tty);
+static void edge_set_termios		(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios);
+static int  edge_ioctl			(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static void edge_break			(struct tty_struct *tty, int break_state);
+static int  edge_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  edge_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
 static int  edge_startup		(struct usb_serial *serial);
 static void edge_shutdown		(struct usb_serial *serial);
 
@@ -233,7 +233,8 @@
 static int  send_iosp_ext_cmd		(struct edgeport_port *edge_port, __u8 command, __u8 param);
 static int  calc_baud_rate_divisor	(int baud_rate, int *divisor);
 static int  send_cmd_write_baud_rate	(struct edgeport_port *edge_port, int baudRate);
-static void change_port_settings	(struct edgeport_port *edge_port, struct ktermios *old_termios);
+static void change_port_settings	(struct tty_struct *tty, struct edgeport_port *edge_port,
+					 struct ktermios *old_termios);
 static int  send_cmd_write_uart_register	(struct edgeport_port *edge_port, __u8 regNum, __u8 regValue);
 static int  write_cmd_usb		(struct edgeport_port *edge_port, unsigned char *buffer, int writeLength);
 static void send_more_port_data		(struct edgeport_serial *edge_serial, struct edgeport_port *edge_port);
@@ -639,8 +640,8 @@
 					dbg("%s - txcredits for port%d = %d", __func__, portNumber, edge_port->txCredits);
 
 					/* tell the tty driver that something has changed */
-					if (edge_port->port->tty)
-						tty_wakeup(edge_port->port->tty);
+					if (edge_port->port->port.tty)
+						tty_wakeup(edge_port->port->port.tty);
 
 					// Since we have more credit, check if more data can be sent
 					send_more_port_data(edge_serial, edge_port);
@@ -737,7 +738,7 @@
 		    __func__, status);
 	}
 
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 
 	if (tty && edge_port->open) {
 		/* let the tty driver wakeup if it has a special write_wakeup function */
@@ -781,7 +782,7 @@
 	}
 
 	/* Get pointer to tty */
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 
 	/* tell the tty driver that something has changed */
 	if (tty && edge_port->open)
@@ -803,7 +804,8 @@
  *	If successful, we return 0
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_open (struct usb_serial_port *port, struct file * filp)
+static int edge_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct usb_serial *serial;
@@ -815,16 +817,15 @@
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	if (port->tty)
-		port->tty->low_latency = low_latency;
+	if (tty)
+		tty->low_latency = low_latency;
 
 	/* see if we've set up our endpoint info yet (can't set it up in edge_startup
 	   as the structures were not set up at that time.) */
 	serial = port->serial;
 	edge_serial = usb_get_serial_data(serial);
-	if (edge_serial == NULL) {
+	if (edge_serial == NULL)
 		return -ENODEV;
-	}
 	if (edge_serial->interrupt_in_buffer == NULL) {
 		struct usb_serial_port *port0 = serial->port[0];
 		
@@ -908,7 +909,7 @@
 
 	if (!edge_port->txfifo.fifo) {
 		dbg("%s - no memory", __func__);
-		edge_close (port, filp);
+		edge_close (tty, port, filp);
 		return -ENOMEM;
 	}
 
@@ -918,7 +919,7 @@
 
 	if (!edge_port->write_urb) {
 		dbg("%s - no memory", __func__);
-		edge_close (port, filp);
+		edge_close (tty, port, filp);
 		return -ENOMEM;
 	}
 
@@ -1038,7 +1039,8 @@
  * edge_close
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
-static void edge_close (struct usb_serial_port *port, struct file * filp)
+static void edge_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
@@ -1106,7 +1108,8 @@
  *	If successful, we return the number of bytes written, otherwise we return
  *	a negative error number.
  *****************************************************************************/
-static int edge_write (struct usb_serial_port *port, const unsigned char *data, int count)
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *data, int count)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct TxFifo *fifo;
@@ -1308,8 +1311,9 @@
  *	(the txCredits), 
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_write_room (struct usb_serial_port *port)
+static int edge_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int room;
 	unsigned long flags;
@@ -1347,8 +1351,9 @@
  *	system, 
  *	Otherwise we return a negative error number.
  *****************************************************************************/
-static int edge_chars_in_buffer (struct usb_serial_port *port)
+static int edge_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int num_chars;
 	unsigned long flags;
@@ -1381,10 +1386,10 @@
  *	this function is called by the tty driver when it wants to stop the data
  *	being read from the port.
  *****************************************************************************/
-static void edge_throttle (struct usb_serial_port *port)
+static void edge_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1397,16 +1402,10 @@
 		return;
 	}
 
-	tty = port->tty;
-	if (!tty) {
-		dbg ("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = edge_write (port, &stop_char, 1);
+		status = edge_write (tty, port, &stop_char, 1);
 		if (status <= 0) {
 			return;
 		}
@@ -1430,10 +1429,10 @@
  *	this function is called by the tty driver when it wants to resume the data
  *	being read from the port (called after SerialThrottle is called)
  *****************************************************************************/
-static void edge_unthrottle (struct usb_serial_port *port)
+static void edge_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1446,31 +1445,18 @@
 		return;
 	}
 
-	tty = port->tty;
-	if (!tty) {
-		dbg ("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = edge_write (port, &start_char, 1);
-		if (status <= 0) {
+		status = edge_write(tty, port, &start_char, 1);
+		if (status <= 0)
 			return;
-		}
 	}
-
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		edge_port->shadowMCR |= MCR_RTS;
-		status = send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
-		if (status != 0) {
-			return;
-		}
+		send_cmd_write_uart_register(edge_port, MCR, edge_port->shadowMCR);
 	}
-
-	return;
 }
 
 
@@ -1478,11 +1464,10 @@
  * SerialSetTermios
  *	this function is called by the tty driver when it wants to change the termios structure
  *****************************************************************************/
-static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
+static void edge_set_termios(struct tty_struct *tty,
+	struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	/* FIXME: This function appears unused ?? */
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned int cflag;
 
 	cflag = tty->termios->c_cflag;
@@ -1502,9 +1487,7 @@
 	}
 
 	/* change the port settings to the new ones specified */
-	change_port_settings (edge_port, old_termios);
-
-	return;
+	change_port_settings(tty, edge_port, old_termios);
 }
 
 
@@ -1536,25 +1519,9 @@
 	return 0;
 }
 
-static int get_number_bytes_avail(struct edgeport_port *edge_port, unsigned int __user *value)
+static int edge_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear)
 {
-	unsigned int result = 0;
-	struct tty_struct *tty = edge_port->port->tty;
-
-	if (!tty)
-		return -ENOIOCTLCMD;
-
-	result = tty->read_cnt;
-
-	dbg("%s(%d) = %d", __func__,  edge_port->port->number, result);
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	//return 0;
-	return -ENOIOCTLCMD;
-}
-
-static int edge_tiocmset (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear)
-{
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int mcr;
 
@@ -1582,8 +1549,9 @@
 	return 0;
 }
 
-static int edge_tiocmget(struct usb_serial_port *port, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int result = 0;
 	unsigned int msr;
@@ -1624,9 +1592,6 @@
 	tmp.baud_base		= 9600;
 	tmp.close_delay		= 5*HZ;
 	tmp.closing_wait	= 30*HZ;
-//	tmp.custom_divisor	= state->custom_divisor;
-//	tmp.hub6		= state->hub6;
-//	tmp.io_type		= state->io_type;
 
 	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 		return -EFAULT;
@@ -1639,8 +1604,10 @@
  * SerialIoctl
  *	this function handles any ioctl calls to the driver
  *****************************************************************************/
-static int edge_ioctl (struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg)
+static int edge_ioctl(struct tty_struct *tty, struct file *file,
+					unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	DEFINE_WAIT(wait);
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct async_icount cnow;
@@ -1650,25 +1617,14 @@
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
 	switch (cmd) {
-		// return number of bytes available
-		case TIOCINQ:
-			dbg("%s (%d) TIOCINQ", __func__,  port->number);
-			return get_number_bytes_avail(edge_port, (unsigned int __user *) arg);
-			break;
-
 		case TIOCSERGETLSR:
 			dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
 			return get_lsr_info(edge_port, (unsigned int __user *) arg);
-			return 0;
 
 		case TIOCGSERIAL:
 			dbg("%s (%d) TIOCGSERIAL", __func__,  port->number);
 			return get_serial_info(edge_port, (struct serial_struct __user *) arg);
 
-		case TIOCSSERIAL:
-			dbg("%s (%d) TIOCSSERIAL", __func__,  port->number);
-			break;
-
 		case TIOCMIWAIT:
 			dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 			cprev = edge_port->icount;
@@ -1723,8 +1679,9 @@
  * SerialBreak
  *	this function sends a break to the port
  *****************************************************************************/
-static void edge_break (struct usb_serial_port *port, int break_state)
+static void edge_break (struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
 	int status;
@@ -1866,7 +1823,7 @@
 					port = edge_serial->serial->port[edge_serial->rxPort];
 					edge_port = usb_get_serial_port_data(port);
 					if (edge_port->open) {
-						tty = edge_port->port->tty;
+						tty = edge_port->port->port.tty;
 						if (tty) {
 							dbg("%s - Sending %d bytes to TTY for port %d", __func__, rxLen, edge_serial->rxPort);
 							edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
@@ -1941,8 +1898,9 @@
 		handle_new_msr (edge_port, byte2);
 
 		/* send the current line settings to the port so we are in sync with any further termios calls */
-		if (edge_port->port->tty)
-			change_port_settings (edge_port, edge_port->port->tty->termios);
+		/* FIXME: locking on tty */
+		if (edge_port->port->port.tty)
+			change_port_settings(edge_port->port->port.tty, edge_port, edge_port->port->port.tty->termios);
 
 		/* we have completed the open */
 		edge_port->openPending = false;
@@ -2078,8 +2036,8 @@
 	}
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsrData && edge_port->port->tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->tty, &data, 1);
+	if (lsrData && edge_port->port->port.tty)
+		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
 
 	/* update input line counters */
 	icount = &edge_port->icount;
@@ -2473,13 +2431,11 @@
  *	This routine is called to set the UART on the device to match the specified
  *	new settings.
  *****************************************************************************/
-#ifndef CMSPAR
-#define CMSPAR 0
-#endif
-static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
+
+static void change_port_settings(struct tty_struct *tty,
+	struct edgeport_port *edge_port, struct ktermios *old_termios)
 {
 	struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	__u8 mask = 0xff;
@@ -2498,13 +2454,6 @@
 		return;
 	}
 
-	tty = edge_port->port->tty;
-	if ((!tty) ||
-	    (!tty->termios)) {
-		dbg("%s - no tty structures", __func__);
-		return;
-	}
-
 	cflag = tty->termios->c_cflag;
 
 	switch (cflag & CSIZE) {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index a58822a..7cf383a 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -243,9 +243,9 @@
 static void stop_read(struct edgeport_port *edge_port);
 static int restart_read(struct edgeport_port *edge_port);
 
-static void edge_set_termios(struct usb_serial_port *port,
-			     struct ktermios *old_termios);
-static void edge_send(struct usb_serial_port *port);
+static void edge_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
+static void edge_send(struct tty_struct *tty);
 
 /* sysfs attributes */
 static int edge_create_sysfs_attrs(struct usb_serial_port *port);
@@ -572,7 +572,7 @@
 								int flush)
 {
 	int baud_rate;
-	struct tty_struct *tty = port->port->tty;
+	struct tty_struct *tty = port->port->port.tty;
 	wait_queue_t wait;
 	unsigned long flags;
 
@@ -1554,7 +1554,7 @@
 	/* Save the new modem status */
 	edge_port->shadow_msr = msr & 0xf0;
 
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 	/* handle CTS flow control */
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & EDGEPORT_MSR_CTS) {
@@ -1587,9 +1587,8 @@
 		new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsr_data && edge_port->port->tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->tty,
-								&data, 1);
+	if (lsr_data && edge_port->port->port.tty)
+		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
 
 	/* update input line counters */
 	icount = &edge_port->icount;
@@ -1750,7 +1749,7 @@
 		++data;
 	}
 
-	tty = edge_port->port->tty;
+	tty = edge_port->port->port.tty;
 	if (tty && urb->actual_length) {
 		usb_serial_debug_data(debug, &edge_port->port->dev,
 					__func__, urb->actual_length, data);
@@ -1819,10 +1818,11 @@
 	}
 
 	/* send any buffered data */
-	edge_send(port);
+	edge_send(port->port.tty);
 }
 
-static int edge_open(struct usb_serial_port *port, struct file *filp)
+static int edge_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct edgeport_serial *edge_serial;
@@ -1838,7 +1838,8 @@
 	if (edge_port == NULL)
 		return -ENODEV;
 
-	port->tty->low_latency = low_latency;
+	if (tty)
+		tty->low_latency = low_latency;
 
 	port_number = port->number - port->serial->minor;
 	switch (port_number) {
@@ -1874,7 +1875,8 @@
 	}
 
 	/* set up the port settings */
-	edge_set_termios(port, port->tty->termios);
+	if (tty)
+		edge_set_termios(tty, port, port->port.tty->termios);
 
 	/* open up the port */
 
@@ -2000,7 +2002,8 @@
 	return status;
 }
 
-static void edge_close(struct usb_serial_port *port, struct file *filp)
+static void edge_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct edgeport_serial *edge_serial;
 	struct edgeport_port *edge_port;
@@ -2048,8 +2051,8 @@
 	dbg("%s - exited", __func__);
 }
 
-static int edge_write(struct usb_serial_port *port, const unsigned char *data,
-								int count)
+static int edge_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *data, int count)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -2070,16 +2073,16 @@
 	count = edge_buf_put(edge_port->ep_out_buf, data, count);
 	spin_unlock_irqrestore(&edge_port->ep_lock, flags);
 
-	edge_send(port);
+	edge_send(tty);
 
 	return count;
 }
 
-static void edge_send(struct usb_serial_port *port)
+static void edge_send(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int count, result;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned long flags;
 
 
@@ -2133,8 +2136,9 @@
 		tty_wakeup(tty);
 }
 
-static int edge_write_room(struct usb_serial_port *port)
+static int edge_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -2154,8 +2158,9 @@
 	return room;
 }
 
-static int edge_chars_in_buffer(struct usb_serial_port *port)
+static int edge_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -2175,10 +2180,10 @@
 	return chars;
 }
 
-static void edge_throttle(struct usb_serial_port *port)
+static void edge_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -2189,11 +2194,10 @@
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = edge_write(port, &stop_char, 1);
-		if (status <= 0)
-			dev_err(&port->dev,
-				"%s - failed to write stop character, %d\n",
-							__func__, status);
+		status = edge_write(tty, port, &stop_char, 1);
+		if (status <= 0) {
+			dev_err(&port->dev, "%s - failed to write stop character, %d\n", __func__, status);
+		}
 	}
 
 	/* if we are implementing RTS/CTS, stop reads */
@@ -2203,10 +2207,10 @@
 
 }
 
-static void edge_unthrottle(struct usb_serial_port *port)
+static void edge_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -2217,11 +2221,10 @@
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = edge_write(port, &start_char, 1);
-		if (status <= 0)
-			dev_err(&port->dev,
-				"%s - failed to write start character, %d\n",
-							__func__, status);
+		status = edge_write(tty, port, &start_char, 1);
+		if (status <= 0) {
+			dev_err(&port->dev, "%s - failed to write start character, %d\n", __func__, status);
+		}
 	}
 	/* if we are implementing RTS/CTS, restart reads */
 	/* are the Edgeport will assert the RTS line */
@@ -2271,11 +2274,10 @@
 	return status;
 }
 
-static void change_port_settings(struct edgeport_port *edge_port,
-						struct ktermios *old_termios)
+static void change_port_settings(struct tty_struct *tty,
+		struct edgeport_port *edge_port, struct ktermios *old_termios)
 {
 	struct ump_uart_config *config;
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	int status;
@@ -2284,9 +2286,7 @@
 
 	dbg("%s - port %d", __func__, edge_port->port->number);
 
-	tty = edge_port->port->tty;
-
-	config = kmalloc(sizeof(*config), GFP_KERNEL);
+	config = kmalloc (sizeof (*config), GFP_KERNEL);
 	if (!config) {
 		*tty->termios = *old_termios;
 		dev_err(&edge_port->port->dev, "%s - out of memory\n",
@@ -2419,11 +2419,13 @@
 	return;
 }
 
-static void edge_set_termios(struct usb_serial_port *port,
-					struct ktermios *old_termios)
+static void edge_set_termios(struct tty_struct *tty, 
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
+	unsigned int cflag;
+
+	cflag = tty->termios->c_cflag;
 
 	dbg("%s - clfag %08x iflag %08x", __func__,
 	    tty->termios->c_cflag, tty->termios->c_iflag);
@@ -2434,12 +2436,14 @@
 	if (edge_port == NULL)
 		return;
 	/* change the port settings to the new ones specified */
-	change_port_settings(edge_port, old_termios);
+	change_port_settings(tty, edge_port, old_termios);
+	return;
 }
 
-static int edge_tiocmset(struct usb_serial_port *port, struct file *file,
+static int edge_tiocmset(struct tty_struct *tty, struct file *file,
 					unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int mcr;
 	unsigned long flags;
@@ -2469,8 +2473,9 @@
 	return 0;
 }
 
-static int edge_tiocmget(struct usb_serial_port *port, struct file *file)
+static int edge_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	unsigned int result = 0;
 	unsigned int msr;
@@ -2522,9 +2527,10 @@
 	return 0;
 }
 
-static int edge_ioctl(struct usb_serial_port *port, struct file *file,
+static int edge_ioctl(struct tty_struct *tty, struct file *file,
 					unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -2569,18 +2575,19 @@
 	return -ENOIOCTLCMD;
 }
 
-static void edge_break(struct usb_serial_port *port, int on)
+static void edge_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int status;
 	int bv = 0;	/* Off */
 
-	dbg("%s - state = %d", __func__, on);
+	dbg("%s - state = %d", __func__, break_state);
 
 	/* chase the port close */
 	chase_port(edge_port, 0, 0);
 
-	if (on == -1)
+	if (break_state == -1)
 		bv = 1;	/* On */
 	status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv);
 	if (status)
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 80d9ec5..a778464 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -74,19 +74,21 @@
 static int initial_wait;
 
 /* Function prototypes for an ipaq */
-static int  ipaq_open (struct usb_serial_port *port, struct file *filp);
-static void ipaq_close (struct usb_serial_port *port, struct file *filp);
-static int  ipaq_startup (struct usb_serial *serial);
-static void ipaq_shutdown (struct usb_serial *serial);
-static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf,
-		       int count);
+static int  ipaq_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void ipaq_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static int  ipaq_startup(struct usb_serial *serial);
+static void ipaq_shutdown(struct usb_serial *serial);
+static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
 static int ipaq_write_bulk(struct usb_serial_port *port, const unsigned char *buf,
-			   int count);
+			int count);
 static void ipaq_write_gather(struct usb_serial_port *port);
 static void ipaq_read_bulk_callback (struct urb *urb);
 static void ipaq_write_bulk_callback(struct urb *urb);
-static int ipaq_write_room(struct usb_serial_port *port);
-static int ipaq_chars_in_buffer(struct usb_serial_port *port);
+static int ipaq_write_room(struct tty_struct *tty);
+static int ipaq_chars_in_buffer(struct tty_struct *tty);
 static void ipaq_destroy_lists(struct usb_serial_port *port);
 
 
@@ -591,7 +593,8 @@
 static int		bytes_in;
 static int		bytes_out;
 
-static int ipaq_open(struct usb_serial_port *port, struct file *filp)
+static int ipaq_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial	*serial = port->serial;
 	struct ipaq_private	*priv;
@@ -637,10 +640,12 @@
 	 * discipline instead of queueing.
 	 */
 
-	port->tty->low_latency = 1;
-	port->tty->raw = 1;
-	port->tty->real_raw = 1;
-
+	if (tty) {
+		tty->low_latency = 1;
+		/* FIXME: These two are bogus */
+		tty->raw = 1;
+		tty->real_raw = 1;
+	}
 	/*
 	 * Lose the small buffers usbserial provides. Make larger ones.
 	 */
@@ -714,7 +719,8 @@
 }
 
 
-static void ipaq_close(struct usb_serial_port *port, struct file *filp)
+static void ipaq_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
@@ -751,7 +757,7 @@
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -770,8 +776,8 @@
 	return;
 }
 
-static int ipaq_write(struct usb_serial_port *port, const unsigned char *buf,
-		       int count)
+static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count)
 {
 	const unsigned char	*current_position = buf;
 	int			bytes_sent = 0;
@@ -905,16 +911,18 @@
 	usb_serial_port_softint(port);
 }
 
-static int ipaq_write_room(struct usb_serial_port *port)
+static int ipaq_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
 	dbg("%s - freelen %d", __func__, priv->free_len);
 	return priv->free_len;
 }
 
-static int ipaq_chars_in_buffer(struct usb_serial_port *port)
+static int ipaq_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ipaq_private	*priv = usb_get_serial_port_data(port);
 
 	dbg("%s - queuelen %d", __func__, priv->queue_len);
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index bc85ca5..a89ebfe 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -179,7 +179,7 @@
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -199,7 +199,8 @@
 	return;
 }
 
-static int ipw_open(struct usb_serial_port *port, struct file *filp)
+static int ipw_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_device *dev = port->serial->dev;
 	u8 buf_flow_static[16] = IPW_BYTES_FLOWINIT;
@@ -212,8 +213,8 @@
 	if (!buf_flow_init)
 		return -ENOMEM;
 
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* --1: Tell the modem to initialize (we think) From sniffs this is always the
 	 * first thing that gets sent to the modem during opening of the device */
@@ -301,7 +302,8 @@
 	return 0;
 }
 
-static void ipw_close(struct usb_serial_port *port, struct file * filp)
+static void ipw_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct usb_device *dev = port->serial->dev;
 	int result;
@@ -384,7 +386,8 @@
 	usb_serial_port_softint(port);
 }
 
-static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int ipw_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct usb_device *dev = port->serial->dev;
 	int ret;
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 0063c11..e59155c 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -85,15 +85,17 @@
 /* if overridden by the user, then use the specified number of XBOFs */
 static int xbof = -1;
 
-static int ir_startup(struct usb_serial *serial);
-static int ir_open(struct usb_serial_port *port, struct file *filep);
-static void ir_close(struct usb_serial_port *port, struct file *filep);
-static int ir_write(struct usb_serial_port *port,
-		const unsigned char *buf, int count);
-static void ir_write_bulk_callback(struct urb *urb);
-static void ir_read_bulk_callback(struct urb *urb);
-static void ir_set_termios(struct usb_serial_port *port,
-		struct ktermios *old_termios);
+static int  ir_startup (struct usb_serial *serial);
+static int  ir_open(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filep);
+static void ir_close(struct tty_struct *tty, struct usb_serial_port *port,
+					struct file *filep);
+static int  ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count);
+static void ir_write_bulk_callback (struct urb *urb);
+static void ir_read_bulk_callback (struct urb *urb);
+static void ir_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios);
 
 /* Not that this lot means you can only have one per system */
 static u8 ir_baud;
@@ -295,7 +297,8 @@
 	return 0;
 }
 
-static int ir_open(struct usb_serial_port *port, struct file *filp)
+static int ir_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	char *buffer;
 	int result = 0;
@@ -343,7 +346,8 @@
 	return result;
 }
 
-static void ir_close(struct usb_serial_port *port, struct file *filp)
+static void ir_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -351,8 +355,8 @@
 	usb_kill_urb(port->read_urb);
 }
 
-static int ir_write(struct usb_serial_port *port,
-		const unsigned char *buf, int count)
+static int ir_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	unsigned char *transfer_buffer;
 	int result;
@@ -360,11 +364,6 @@
 
 	dbg("%s - port = %d, count = %d", __func__, port->number, count);
 
-	if (!port->tty) {
-		dev_err(&port->dev, "%s - no tty???\n", __func__);
-		return 0;
-	}
-
 	if (count == 0)
 		return 0;
 
@@ -450,14 +449,13 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port->open_count) {
+	if (!port->port.count) {
 		dbg("%s - port closed.", __func__);
 		return;
 	}
 
 	switch (status) {
 	case 0: /* Successful */
-
 		/*
 		 * The first byte of the packet we get from the device
 		 * contains a busy indicator and baud rate change.
@@ -465,19 +463,11 @@
 		 */
 		if ((*data & 0x0f) > 0)
 			ir_baud = *data & 0x0f;
-
-		usb_serial_debug_data(
-			debug,
-			&port->dev,
-			__func__,
-			urb->actual_length,
-			data);
-
-		tty = port->tty;
-
+		usb_serial_debug_data(debug, &port->dev, __func__,
+						urb->actual_length, data);
+ 		tty = port->port.tty;
 		if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
-			tty_insert_flip_string(tty, data + 1,
-					urb->actual_length - 1);
+			tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
 			tty_flip_buffer_push(tty);
 		}
 
@@ -488,11 +478,10 @@
 		 */
 
 	case -EPROTO: /* taking inspiration from pl2303.c */
-
-		/* Continue trying to always read */
+			/* Continue trying to always read */
 		usb_fill_bulk_urb(
 			port->read_urb,
-			port->serial->dev,
+			port->serial->dev, 
 			usb_rcvbulkpipe(port->serial->dev,
 				port->bulk_in_endpointAddress),
 			port->read_urb->transfer_buffer,
@@ -502,23 +491,19 @@
 
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			dev_err(&port->dev,
-				"%s - failed resubmitting read urb, error %d\n",
+			dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n",
 				__func__, result);
-		break;
-
+			break ;
 	default:
 		dbg("%s - nonzero read bulk status received: %d",
-			__func__,
-			status);
-		break;
+			__func__, status);
+		break ;
 	}
-
 	return;
 }
 
-static void ir_set_termios(struct usb_serial_port *port,
-		struct ktermios *old_termios)
+static void ir_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	unsigned char *transfer_buffer;
 	int result;
@@ -527,7 +512,7 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	baud = tty_get_baud_rate(port->tty);
+	baud = tty_get_baud_rate(tty);
 
 	/*
 	 * FIXME, we should compare the baud request against the
@@ -600,8 +585,8 @@
 				__func__, result);
 
 	/* Only speed changes are supported */
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	tty_encode_baud_rate(port->tty, baud, baud);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_encode_baud_rate(tty, baud, baud);
 }
 
 static int __init ir_init(void)
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index a01e987..d654148 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -144,9 +144,10 @@
 	}
 }
 
-static int iuu_tiocmset(struct usb_serial_port *port, struct file *file,
+static int iuu_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -171,8 +172,9 @@
  * When no card , the reader respond with TIOCM_CD
  * This is known as CD autodetect mechanism
  */
-static int iuu_tiocmget(struct usb_serial_port *port, struct file *file)
+static int iuu_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int rc;
@@ -630,7 +632,7 @@
 	}
 
 	dbg("%s - %i chars to write", __func__, urb->actual_length);
-	tty = port->tty;
+	tty = port->port.tty;
 	if (data == NULL)
 		dbg("%s - data is NULL !!!", __func__);
 	if (tty && urb->actual_length && data) {
@@ -752,11 +754,10 @@
 	/* if nothing to write call again rxcmd */
 	dbg("%s - rxcmd recall", __func__);
 	iuu_led_activity_off(urb);
-	return;
 }
 
-static int iuu_uart_write(struct usb_serial_port *port, const u8 *buf,
-			  int count)
+static int iuu_uart_write(struct tty_struct *tty, struct usb_serial_port *port,
+			  const u8 *buf, int count)
 {
 	struct iuu_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -948,7 +949,8 @@
 	return 0;
 }
 
-static void iuu_close(struct usb_serial_port *port, struct file *filp)
+static void iuu_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	/* iuu_led (port,255,0,0,0); */
 	struct usb_serial *serial;
@@ -964,8 +966,8 @@
 
 	iuu_uart_off(port);
 	if (serial->dev) {
-		if (port->tty) {
-			c_cflag = port->tty->termios->c_cflag;
+		if (tty) {
+			c_cflag = tty->termios->c_cflag;
 			if (c_cflag & HUPCL) {
 				/* drop DTR and RTS */
 				priv = usb_get_serial_port_data(port);
@@ -989,7 +991,8 @@
 	}
 }
 
-static int iuu_open(struct usb_serial_port *port, struct file *filp)
+static int iuu_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	u8 *buf;
@@ -1036,15 +1039,17 @@
 
 	/* set the termios structure */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
-						| TIOCM_CTS | CSTOPB | PARENB;
-		port->tty->termios->c_lflag = 0;
-		port->tty->termios->c_oflag = 0;
-		port->tty->termios->c_iflag = 0;
+	if (tty && !priv->termios_initialized) {
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+					| TIOCM_CTS | CSTOPB | PARENB;
+		tty->termios->c_ispeed = 9600;
+		tty->termios->c_ospeed = 9600;
+		tty->termios->c_lflag = 0;
+		tty->termios->c_oflag = 0;
+		tty->termios->c_iflag = 0;
 		priv->termios_initialized = 1;
-		port->tty->low_latency = 1;
+		tty->low_latency = 1;
 		priv->poll = 0;
 	 }
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -1148,7 +1153,7 @@
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		iuu_close(port, NULL);
+		iuu_close(tty, port, NULL);
 		return -EPROTO;
 	} else {
 		dbg("%s - rxcmd OK", __func__);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 11e439b..a371c41 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -244,20 +244,9 @@
 module_init(keyspan_init);
 module_exit(keyspan_exit);
 
-static void keyspan_rx_throttle (struct usb_serial_port *port)
+static void keyspan_break_ctl(struct tty_struct *tty, int break_state)
 {
-	dbg("%s - port %d", __func__, port->number);
-}
-
-
-static void keyspan_rx_unthrottle (struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-}
-
-
-static void keyspan_break_ctl (struct usb_serial_port *port, int break_state)
-{
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private 	*p_priv;
 
  	dbg("%s", __func__);
@@ -273,14 +262,13 @@
 }
 
 
-static void keyspan_set_termios (struct usb_serial_port *port, 
-				     struct ktermios *old_termios)
+static void keyspan_set_termios (struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	int				baud_rate, device_port;
 	struct keyspan_port_private 	*p_priv;
 	const struct keyspan_device_details	*d_details;
 	unsigned int 			cflag;
-	struct tty_struct		*tty = port->tty;
 
 	dbg("%s", __func__);
 
@@ -312,12 +300,11 @@
 	keyspan_send_setup(port, 0);
 }
 
-static int keyspan_tiocmget(struct usb_serial_port *port, struct file *file)
+static int keyspan_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
 	unsigned int			value;
-	struct keyspan_port_private 	*p_priv;
-
-	p_priv = usb_get_serial_port_data(port);
 	
 	value = ((p_priv->rts_state) ? TIOCM_RTS : 0) |
 		((p_priv->dtr_state) ? TIOCM_DTR : 0) |
@@ -329,18 +316,16 @@
 	return value;
 }
 
-static int keyspan_tiocmset(struct usb_serial_port *port, struct file *file,
+static int keyspan_tiocmset(struct tty_struct *tty, struct file *file,
 			    unsigned int set, unsigned int clear)
 {
-	struct keyspan_port_private 	*p_priv;
-
-	p_priv = usb_get_serial_port_data(port);
+	struct usb_serial_port *port = tty->driver_data;
+	struct keyspan_port_private *p_priv = usb_get_serial_port_data(port);
 	
 	if (set & TIOCM_RTS)
 		p_priv->rts_state = 1;
 	if (set & TIOCM_DTR)
 		p_priv->dtr_state = 1;
-
 	if (clear & TIOCM_RTS)
 		p_priv->rts_state = 0;
 	if (clear & TIOCM_DTR)
@@ -349,16 +334,10 @@
 	return 0;
 }
 
-static int keyspan_ioctl(struct usb_serial_port *port, struct file *file,
-			     unsigned int cmd, unsigned long arg)
-{
-	return -ENOIOCTLCMD;
-}
-
-	/* Write function is similar for the four protocols used
-	   with only a minor change for usa90 (usa19hs) required */
-static int keyspan_write(struct usb_serial_port *port, 
-			 const unsigned char *buf, int count)
+/* Write function is similar for the four protocols used
+   with only a minor change for usa90 (usa19hs) required */
+static int keyspan_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct keyspan_port_private 	*p_priv;
 	const struct keyspan_device_details	*d_details;
@@ -448,7 +427,7 @@
 	}
 
 	port =  urb->context;
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -479,7 +458,7 @@
 				
 		/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->open_count)
+	if (port->port.count)
 		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 		}
@@ -496,7 +475,7 @@
 	p_priv = usb_get_serial_port_data(port);
 	dbg ("%s - urb %d", __func__, urb == p_priv->out_urbs[1]);
 
-	if (port->open_count)
+	if (port->port.count)
 		usb_serial_port_softint(port);
 }
 
@@ -567,10 +546,10 @@
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -619,7 +598,7 @@
 		p_priv = usb_get_serial_port_data(port);
 		data = urb->transfer_buffer;
 
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			for (i = 0; i < urb->actual_length ; ++i) {
 				tty_insert_flip_char(tty, data[i], 0);
@@ -629,7 +608,7 @@
 
 		/* Resubmit urb so we continue receiving */
 		urb->dev = port->serial->dev;
-		if (port->open_count)
+		if (port->port.count)
 			if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 				dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 			}
@@ -704,10 +683,10 @@
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -797,10 +776,10 @@
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -839,7 +818,7 @@
 	}
 
 	port =  urb->context;
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -866,7 +845,7 @@
 				
 		/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->open_count)
+	if (port->port.count)
 		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 		}
@@ -904,7 +883,7 @@
 				return;
 			}
 			port = serial->port[data[i++]];
-			tty = port->tty;
+			tty = port->port.tty;
 			len = data[i++];
 
 			/* 0x80 bit is error flag */
@@ -912,7 +891,7 @@
 				/* no error on any byte */
 				i++;
 				for (x = 1; x < len ; ++x)
-					if (port->open_count)
+					if (port->port.count)
 						tty_insert_flip_char(tty,
 								data[i++], 0);
 					else
@@ -930,13 +909,13 @@
 					if (stat & RXERROR_PARITY)
 						flag |= TTY_PARITY;
 					/* XXX should handle break (0x10) */
-					if (port->open_count)
+					if (port->port.count)
 						tty_insert_flip_char(tty,
 							data[i+1], flag);
 					i += 2;
 				}
 			}
-			if (port->open_count)
+			if (port->port.count)
 				tty_flip_buffer_push(tty);
 		}
 	}
@@ -978,7 +957,7 @@
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (urb->actual_length) {
 	
 		/* if current mode is DMA, looks like usa28 format
@@ -1021,7 +1000,7 @@
 				
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
-	if (port->open_count)
+	if (port->port.count)
 		if ((err = usb_submit_urb(urb, GFP_ATOMIC)) != 0) {
 			dbg("%s - resubmit read urb failed. (%d)", __func__, err);
 		}
@@ -1064,10 +1043,10 @@
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -1139,10 +1118,10 @@
 	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 
-	if (port->tty && !C_CLOCAL(port->tty)
+	if (port->port.tty && !C_CLOCAL(port->port.tty)
 	    && old_dcd_state != p_priv->dcd_state) {
 		if (old_dcd_state)
-			tty_hangup(port->tty);
+			tty_hangup(port->port.tty);
 		/*  else */
 		/*	wake_up_interruptible(&p_priv->open_wait); */
 	}
@@ -1177,8 +1156,9 @@
 	}
 }
 
-static int keyspan_write_room (struct usb_serial_port *port)
+static int keyspan_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_port_private	*p_priv;
 	const struct keyspan_device_details	*d_details;
 	int				flip;
@@ -1210,13 +1190,8 @@
 }
 
 
-static int keyspan_chars_in_buffer (struct usb_serial_port *port)
-{
-	return 0;
-}
-
-
-static int keyspan_open (struct usb_serial_port *port, struct file *filp)
+static int keyspan_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct keyspan_port_private 	*p_priv;
 	struct keyspan_serial_private 	*s_priv;
@@ -1225,7 +1200,7 @@
 	int				i, err;
 	int				baud_rate, device_port;
 	struct urb			*urb;
-	unsigned int			cflag;
+	unsigned int			cflag = 0;
 
 	s_priv = usb_get_serial_data(serial);
 	p_priv = usb_get_serial_port_data(port);
@@ -1271,19 +1246,19 @@
 	/* get the terminal config for the setup message now so we don't
 	 * need to send 2 of them */
 
-	cflag = port->tty->termios->c_cflag;
 	device_port = port->number - port->serial->minor;
-
-	/* Baud rate calculation takes baud rate as an integer
-	   so other rates can be generated if desired. */
-	baud_rate = tty_get_baud_rate(port->tty);
-	/* If no match or invalid, leave as default */
-	if (baud_rate >= 0
-	    && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
-				NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
-		p_priv->baud = baud_rate;
+	if (tty) {
+		cflag = tty->termios->c_cflag;
+		/* Baud rate calculation takes baud rate as an integer
+		   so other rates can be generated if desired. */
+		baud_rate = tty_get_baud_rate(tty);
+		/* If no match or invalid, leave as default */
+		if (baud_rate >= 0
+		    && d_details->calculate_baud_rate(baud_rate, d_details->baudclk,
+					NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) {
+			p_priv->baud = baud_rate;
+		}
 	}
-
 	/* set CTS/RTS handshake etc. */
 	p_priv->cflag = cflag;
 	p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none;
@@ -1301,7 +1276,8 @@
 		usb_kill_urb(urb);
 }
 
-static void keyspan_close(struct usb_serial_port *port, struct file *filp)
+static void keyspan_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int			i;
 	struct usb_serial	*serial = port->serial;
@@ -1338,7 +1314,7 @@
 			stop_urb(p_priv->out_urbs[i]);
 		}
 	}
-	port->tty = NULL;
+	port->port.tty = NULL;
 }
 
 	/* download the firmware to a pre-renumeration device */
@@ -2427,7 +2403,7 @@
 	}
 	/* Sending intermediate configs */
 	else {
-		if (port->open_count)
+		if (port->port.count)
 			msg.portEnabled = 1;
 		msg.txBreak = (p_priv->break_on);
 	}
diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h
index 8bf7263..38b4582 100644
--- a/drivers/usb/serial/keyspan.h
+++ b/drivers/usb/serial/keyspan.h
@@ -35,17 +35,18 @@
 
 
 /* Function prototypes for Keyspan serial converter */
-static int  keyspan_open		(struct usb_serial_port *port,
+static int  keyspan_open		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 struct file *filp);
-static void keyspan_close		(struct usb_serial_port *port,
+static void keyspan_close		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 struct file *filp);
 static int  keyspan_startup		(struct usb_serial *serial);
 static void keyspan_shutdown		(struct usb_serial *serial);
-static void keyspan_rx_throttle		(struct usb_serial_port *port);
-static void keyspan_rx_unthrottle	(struct usb_serial_port *port);
-static int  keyspan_write_room		(struct usb_serial_port *port);
+static int  keyspan_write_room		(struct tty_struct *tty);
 
-static int  keyspan_write		(struct usb_serial_port *port,
+static int  keyspan_write		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 const unsigned char *buf,
 					 int count);
 
@@ -53,18 +54,14 @@
 					 int reset_port);
 
 
-static int  keyspan_chars_in_buffer 	(struct usb_serial_port *port);
-static int  keyspan_ioctl		(struct usb_serial_port *port,
-					 struct file *file,
-					 unsigned int cmd,
-					 unsigned long arg);
-static void keyspan_set_termios		(struct usb_serial_port *port,
+static void keyspan_set_termios		(struct tty_struct *tty,
+					 struct usb_serial_port *port,
 					 struct ktermios *old);
-static void keyspan_break_ctl		(struct usb_serial_port *port,
+static void keyspan_break_ctl		(struct tty_struct *tty,
 					 int break_state);
-static int  keyspan_tiocmget		(struct usb_serial_port *port,
+static int  keyspan_tiocmget		(struct tty_struct *tty,
 					 struct file *file);
-static int  keyspan_tiocmset		(struct usb_serial_port *port,
+static int  keyspan_tiocmset		(struct tty_struct *tty,
 					 struct file *file, unsigned int set,
 					 unsigned int clear);
 static int  keyspan_fake_startup	(struct usb_serial *serial);
@@ -567,10 +564,6 @@
 	.close			= keyspan_close,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
-	.chars_in_buffer	= keyspan_chars_in_buffer,
-	.throttle		= keyspan_rx_throttle,
-	.unthrottle		= keyspan_rx_unthrottle,
-	.ioctl			= keyspan_ioctl,
 	.set_termios		= keyspan_set_termios,
 	.break_ctl		= keyspan_break_ctl,
 	.tiocmget		= keyspan_tiocmget,
@@ -591,10 +584,6 @@
 	.close			= keyspan_close,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
-	.chars_in_buffer	= keyspan_chars_in_buffer,
-	.throttle		= keyspan_rx_throttle,
-	.unthrottle		= keyspan_rx_unthrottle,
-	.ioctl			= keyspan_ioctl,
 	.set_termios		= keyspan_set_termios,
 	.break_ctl		= keyspan_break_ctl,
 	.tiocmget		= keyspan_tiocmget,
@@ -615,10 +604,6 @@
 	.close			= keyspan_close,
 	.write			= keyspan_write,
 	.write_room		= keyspan_write_room,
-	.chars_in_buffer	= keyspan_chars_in_buffer,
-	.throttle		= keyspan_rx_throttle,
-	.unthrottle		= keyspan_rx_unthrottle,
-	.ioctl			= keyspan_ioctl,
 	.set_termios		= keyspan_set_termios,
 	.break_ctl		= keyspan_break_ctl,
 	.tiocmget		= keyspan_tiocmget,
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 60b3e22..24a08ac 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -171,7 +171,7 @@
 		container_of(work, struct keyspan_pda_private, wakeup_work);
 	struct usb_serial_port *port = priv->port;
 
-	tty_wakeup(port->tty);
+	tty_wakeup(port->port.tty);
 }
 
 static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -203,7 +203,7 @@
 static void keyspan_pda_rx_interrupt (struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-       	struct tty_struct *tty = port->tty;
+       	struct tty_struct *tty = port->port.tty;
 	unsigned char *data = urb->transfer_buffer;
 	int i;
 	int retval;
@@ -266,7 +266,7 @@
 }
 
 
-static void keyspan_pda_rx_throttle (struct usb_serial_port *port)
+static void keyspan_pda_rx_throttle(struct tty_struct *tty)
 {
 	/* stop receiving characters. We just turn off the URB request, and
 	   let chars pile up in the device. If we're doing hardware
@@ -274,14 +274,15 @@
 	   fills up. If we're doing XON/XOFF, this would be a good time to
 	   send an XOFF, although it might make sense to foist that off
 	   upon the device too. */
-
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("keyspan_pda_rx_throttle port %d", port->number);
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
 
-static void keyspan_pda_rx_unthrottle (struct usb_serial_port *port)
+static void keyspan_pda_rx_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	/* just restart the receive interrupt URB */
 	dbg("keyspan_pda_rx_unthrottle port %d", port->number);
 	port->interrupt_in_urb->dev = port->serial->dev;
@@ -330,8 +331,9 @@
 }
 
 
-static void keyspan_pda_break_ctl (struct usb_serial_port *port, int break_state)
+static void keyspan_pda_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int value;
 	int result;
@@ -354,8 +356,8 @@
 }
 
 
-static void keyspan_pda_set_termios (struct usb_serial_port *port, 
-				     struct ktermios *old_termios)
+static void keyspan_pda_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	speed_t speed;
@@ -380,7 +382,7 @@
 
 	   For now, just do baud. */
 
-	speed = tty_get_baud_rate(port->tty);
+	speed = tty_get_baud_rate(tty);
 	speed = keyspan_pda_setbaud(serial, speed);
 
 	if (speed == 0) {
@@ -390,8 +392,8 @@
 	}
 	/* Only speed can change so copy the old h/w parameters
 	   then encode the new speed */
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	tty_encode_baud_rate(port->tty, speed, speed);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	tty_encode_baud_rate(tty, speed, speed);
 }
 
 
@@ -425,8 +427,9 @@
 	return rc;
 }
 
-static int keyspan_pda_tiocmget(struct usb_serial_port *port, struct file *file)
+static int keyspan_pda_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int rc;
 	unsigned char status;
@@ -445,9 +448,10 @@
 	return value;
 }
 
-static int keyspan_pda_tiocmset(struct usb_serial_port *port, struct file *file,
+static int keyspan_pda_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	int rc;
 	unsigned char status;
@@ -469,23 +473,8 @@
 	return rc;
 }
 
-static int keyspan_pda_ioctl(struct usb_serial_port *port, struct file *file,
-			     unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		return 0; /* TODO */
-	}
-	
-	return -ENOIOCTLCMD;
-}
-
-static int keyspan_pda_write(struct usb_serial_port *port, 
-			     const unsigned char *buf, int count)
+static int keyspan_pda_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	int request_unthrottle = 0;
@@ -607,22 +596,21 @@
 }
 
 
-static int keyspan_pda_write_room (struct usb_serial_port *port)
+static int keyspan_pda_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_pda_private *priv;
-
 	priv = usb_get_serial_port_data(port);
-
 	/* used by n_tty.c for processing of tabs and such. Giving it our
 	   conservative guess is probably good enough, but needs testing by
 	   running a console through the device. */
-
 	return (priv->tx_room);
 }
 
 
-static int keyspan_pda_chars_in_buffer (struct usb_serial_port *port)
+static int keyspan_pda_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct keyspan_pda_private *priv;
 	unsigned long flags;
 	int ret = 0;
@@ -640,7 +628,8 @@
 }
 
 
-static int keyspan_pda_open (struct usb_serial_port *port, struct file *filp)
+static int keyspan_pda_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	unsigned char room;
@@ -672,7 +661,7 @@
 
 	/* the normal serial device seems to always turn on DTR and RTS here,
 	   so do the same */
-	if (port->tty->termios->c_cflag & CBAUD)
+	if (tty && (tty->termios->c_cflag & CBAUD))
 		keyspan_pda_set_modem_info(serial, (1<<7) | (1<<2) );
 	else
 		keyspan_pda_set_modem_info(serial, 0);
@@ -690,13 +679,14 @@
 }
 
 
-static void keyspan_pda_close(struct usb_serial_port *port, struct file *filp)
+static void keyspan_pda_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 
 	if (serial->dev) {
 		/* the normal serial device seems to always shut off DTR and RTS now */
-		if (port->tty->termios->c_cflag & HUPCL)
+		if (tty->termios->c_cflag & HUPCL)
 			keyspan_pda_set_modem_info(serial, 0);
 
 		/* shutdown our bulk reads and writes */
@@ -832,7 +822,6 @@
 	.chars_in_buffer =	keyspan_pda_chars_in_buffer,
 	.throttle =		keyspan_pda_rx_throttle,
 	.unthrottle =		keyspan_pda_rx_unthrottle,
-	.ioctl =		keyspan_pda_ioctl,
 	.set_termios =		keyspan_pda_set_termios,
 	.break_ctl =		keyspan_pda_break_ctl,
 	.tiocmget =		keyspan_pda_tiocmget,
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 79787ed..4a38ec8 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -74,29 +74,33 @@
  */
 static int  klsi_105_startup	         (struct usb_serial *serial);
 static void klsi_105_shutdown	         (struct usb_serial *serial);
-static int  klsi_105_open	         (struct usb_serial_port *port,
+static int  klsi_105_open	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
-static void klsi_105_close	         (struct usb_serial_port *port,
+static void klsi_105_close	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
-static int  klsi_105_write	         (struct usb_serial_port *port,
+static int  klsi_105_write	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  const unsigned char *buf,
 					  int count);
 static void klsi_105_write_bulk_callback (struct urb *urb);
-static int  klsi_105_chars_in_buffer     (struct usb_serial_port *port);
-static int  klsi_105_write_room          (struct usb_serial_port *port);
+static int  klsi_105_chars_in_buffer     (struct tty_struct *tty);
+static int  klsi_105_write_room          (struct tty_struct *tty);
 
 static void klsi_105_read_bulk_callback  (struct urb *urb);
-static void klsi_105_set_termios         (struct usb_serial_port *port,
+static void klsi_105_set_termios         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct ktermios *old);
-static void klsi_105_throttle		 (struct usb_serial_port *port);
-static void klsi_105_unthrottle		 (struct usb_serial_port *port);
+static void klsi_105_throttle		 (struct tty_struct *tty);
+static void klsi_105_unthrottle		 (struct tty_struct *tty);
 /*
-static void klsi_105_break_ctl	         (struct usb_serial_port *port,
+static void klsi_105_break_ctl	         (struct tty_struct *tty,
 					  int break_state );
  */
-static int  klsi_105_tiocmget	         (struct usb_serial_port *port,
+static int  klsi_105_tiocmget	         (struct tty_struct *tty,
 					  struct file *file);
-static int  klsi_105_tiocmset	         (struct usb_serial_port *port,
+static int  klsi_105_tiocmset	         (struct tty_struct *tty,
 					  struct file *file, unsigned int set,
 					  unsigned int clear);
 
@@ -361,7 +365,8 @@
 	}
 } /* klsi_105_shutdown */
 
-static int  klsi_105_open (struct usb_serial_port *port, struct file *filp)
+static int  klsi_105_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int retval = 0;
@@ -375,7 +380,7 @@
 
 	/* force low_latency on so that our tty_push actually forces
 	 * the data through
-	 * port->tty->low_latency = 1; */
+	 * tty->low_latency = 1; */
 
 	/* Do a defined restart:
 	 * Set up sane default baud rate and send the 'READ_ON'
@@ -393,12 +398,12 @@
 	
 	/* set up termios structure */
 	spin_lock_irqsave (&priv->lock, flags);
-	priv->termios.c_iflag = port->tty->termios->c_iflag;
-	priv->termios.c_oflag = port->tty->termios->c_oflag;
-	priv->termios.c_cflag = port->tty->termios->c_cflag;
-	priv->termios.c_lflag = port->tty->termios->c_lflag;
+	priv->termios.c_iflag = tty->termios->c_iflag;
+	priv->termios.c_oflag = tty->termios->c_oflag;
+	priv->termios.c_cflag = tty->termios->c_cflag;
+	priv->termios.c_lflag = tty->termios->c_lflag;
 	for (i=0; i<NCCS; i++)
-		priv->termios.c_cc[i] = port->tty->termios->c_cc[i];
+		priv->termios.c_cc[i] = tty->termios->c_cc[i];
 	priv->cfg.pktlen   = cfg.pktlen;
 	priv->cfg.baudrate = cfg.baudrate;
 	priv->cfg.databits = cfg.databits;
@@ -452,7 +457,8 @@
 } /* klsi_105_open */
 
 
-static void klsi_105_close (struct usb_serial_port *port, struct file *filp)
+static void klsi_105_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int rc;
@@ -493,8 +499,8 @@
 #define KLSI_105_DATA_OFFSET	2   /* in the bulk urb data block */
 
 
-static int klsi_105_write (struct usb_serial_port *port,
-			   const unsigned char *buf, int count)
+static int klsi_105_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	int result, size;
@@ -584,8 +590,9 @@
 
 
 /* return number of characters currently in the writing process */
-static int klsi_105_chars_in_buffer (struct usb_serial_port *port)
+static int klsi_105_chars_in_buffer (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int chars = 0;
 	int i;
 	unsigned long flags;
@@ -605,8 +612,9 @@
 	return (chars);
 }
 
-static int klsi_105_write_room (struct usb_serial_port *port)
+static int klsi_105_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned long flags;
 	int i;
 	int room = 0;
@@ -660,7 +668,7 @@
 	} else {
 		int bytes_sent = ((__u8 *) data)[0] +
 				 ((unsigned int) ((__u8 *) data)[1] << 8);
-		tty = port->tty;
+		tty = port->port.tty;
 		/* we should immediately resubmit the URB, before attempting
 		 * to pass the data on to the tty layer. But that needs locking
 		 * against re-entry an then mixed-up data because of
@@ -699,11 +707,11 @@
 } /* klsi_105_read_bulk_callback */
 
 
-static void klsi_105_set_termios (struct usb_serial_port *port,
+static void klsi_105_set_termios (struct tty_struct *tty,
+				  struct usb_serial_port *port,
 				  struct ktermios *old_termios)
 {
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	unsigned int iflag = tty->termios->c_iflag;
 	unsigned int old_iflag = old_termios->c_iflag;
 	unsigned int cflag = tty->termios->c_cflag;
@@ -863,8 +871,9 @@
 
 
 #if 0
-static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
+static void mct_u232_break_ctl( struct tty_struct *tty, int break_state )
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = (struct mct_u232_private *)port->private;
 	unsigned char lcr = priv->last_lcr;
@@ -878,8 +887,9 @@
 } /* mct_u232_break_ctl */
 #endif
 
-static int klsi_105_tiocmget (struct usb_serial_port *port, struct file *file)
+static int klsi_105_tiocmget (struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct klsi_105_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int rc;
@@ -900,7 +910,7 @@
 	return (int)line_state;
 }
 
-static int klsi_105_tiocmset (struct usb_serial_port *port, struct file *file,
+static int klsi_105_tiocmset (struct tty_struct *tty, struct file *file,
 			      unsigned int set, unsigned int clear)
 {
 	int retval = -EINVAL;
@@ -929,14 +939,16 @@
 	return retval;
 }
 
-static void klsi_105_throttle (struct usb_serial_port *port)
+static void klsi_105_throttle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
 }
 
-static void klsi_105_unthrottle (struct usb_serial_port *port)
+static void klsi_105_unthrottle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int result;
 
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 693f00d..40c67f0 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -70,19 +70,22 @@
 /* Function prototypes */
 static int  kobil_startup (struct usb_serial *serial);
 static void kobil_shutdown (struct usb_serial *serial);
-static int  kobil_open (struct usb_serial_port *port, struct file *filp);
-static void kobil_close (struct usb_serial_port *port, struct file *filp);
-static int  kobil_write (struct usb_serial_port *port, 
+static int  kobil_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void kobil_close (struct tty_struct *tty, struct usb_serial_port *port,
+			struct file *filp);
+static int  kobil_write (struct tty_struct *tty, struct usb_serial_port *port, 
 			 const unsigned char *buf, int count);
-static int  kobil_write_room(struct usb_serial_port *port);
-static int  kobil_ioctl(struct usb_serial_port *port, struct file *file,
+static int  kobil_write_room(struct tty_struct *tty);
+static int  kobil_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
-static int  kobil_tiocmget(struct usb_serial_port *port, struct file *file);
-static int  kobil_tiocmset(struct usb_serial_port *port, struct file *file,
+static int  kobil_tiocmget(struct tty_struct *tty, struct file *file);
+static int  kobil_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear);
 static void kobil_read_int_callback( struct urb *urb );
 static void kobil_write_callback( struct urb *purb );
-static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old);
+static void kobil_set_termios(struct tty_struct *tty, 
+			struct usb_serial_port *port, struct ktermios *old);
 
 
 static struct usb_device_id id_table [] = {
@@ -201,8 +204,8 @@
 	dbg("%s - port %d", __func__, serial->port[0]->number);
 
 	for (i=0; i < serial->num_ports; ++i) {
-		while (serial->port[i]->open_count > 0) {
-			kobil_close (serial->port[i], NULL);
+		while (serial->port[i]->port.count > 0) {
+			kobil_close (NULL, serial->port[i], NULL);
 		}
 		kfree(usb_get_serial_port_data(serial->port[i]));
 		usb_set_serial_port_data(serial->port[i], NULL);
@@ -210,7 +213,8 @@
 }
 
 
-static int kobil_open (struct usb_serial_port *port, struct file *filp)
+static int kobil_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int result = 0;
 	struct kobil_private *priv;
@@ -229,14 +233,15 @@
 	 * the data through, otherwise it is scheduled, and with high
 	 * data rates (like with OHCI) data can get lost.
 	 */
-	port->tty->low_latency = 1;
+	if (tty) {
+		tty->low_latency = 1;
 
-	// without this, every push_tty_char is echoed :-(  
-	port->tty->termios->c_lflag = 0;
-	port->tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
-	port->tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
-	port->tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
-	
+		/* Default to echo off and other sane device settings */
+		tty->termios->c_lflag = 0;
+		tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+		tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+		tty->termios->c_oflag &= ~ONLCR; // do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D)
+	}	
 	// allocate memory for transfer buffer
 	transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
 	if (! transfer_buffer) {
@@ -330,7 +335,8 @@
 }
 
 
-static void kobil_close (struct usb_serial_port *port, struct file *filp)
+static void kobil_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
@@ -360,7 +366,7 @@
 		return;
 	}
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (urb->actual_length) {
 
 		// BEGIN DEBUG
@@ -395,7 +401,7 @@
 }
 
 
-static int kobil_write (struct usb_serial_port *port, 
+static int kobil_write (struct tty_struct *tty, struct usb_serial_port *port, 
 			const unsigned char *buf, int count)
 {
 	int length = 0;
@@ -417,12 +423,9 @@
 
 	// Copy data to buffer
 	memcpy (priv->buf + priv->filled, buf, count);
-
 	usb_serial_debug_data(debug, &port->dev, __func__, count, priv->buf + priv->filled);
-
 	priv->filled = priv->filled + count;
 
-
 	// only send complete block. TWIN, KAAN SIM and adapter K use the same protocol.
 	if ( ((priv->device_type != KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 2) && (priv->filled >= (priv->buf[1] + 3))) || 
 	     ((priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) && (priv->filled > 3) && (priv->filled >= (priv->buf[2] + 4))) ) {
@@ -478,15 +481,17 @@
 }
 
 
-static int kobil_write_room (struct usb_serial_port *port)
+static int kobil_write_room (struct tty_struct *tty)
 {
 	//dbg("%s - port %d", __func__, port->number);
+	/* FIXME */
 	return 8;
 }
 
 
-static int kobil_tiocmget(struct usb_serial_port *port, struct file *file)
+static int kobil_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private * priv;
 	int result;
 	unsigned char *transfer_buffer;
@@ -524,9 +529,10 @@
 	return result;
 }
 
-static int  kobil_tiocmset(struct usb_serial_port *port, struct file *file,
+static int kobil_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private * priv;
 	int result;
 	int dtr = 0;
@@ -590,12 +596,13 @@
 	return (result < 0) ? result : 0;
 }
 
-static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old)
+static void kobil_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old)
 {
 	struct kobil_private * priv;
 	int result;
 	unsigned short urb_val = 0;
-	int c_cflag = port->tty->termios->c_cflag;
+	int c_cflag = tty->termios->c_cflag;
 	speed_t speed;
 	void * settings;
 
@@ -604,7 +611,7 @@
 		// This device doesn't support ioctl calls
 		return;
 
-	switch (speed = tty_get_baud_rate(port->tty)) {
+	switch (speed = tty_get_baud_rate(tty)) {
 		case 1200:
 			urb_val = SUSBCR_SBR_1200;
 			break;
@@ -634,8 +641,8 @@
 		urb_val |= SUSBCR_SPASB_NoParity;
 		strcat(settings, "No Parity");
 	}
-	port->tty->termios->c_cflag &= ~CMSPAR;
-	tty_encode_baud_rate(port->tty, speed, speed);
+	tty->termios->c_cflag &= ~CMSPAR;
+	tty_encode_baud_rate(tty, speed, speed);
 
 	result = usb_control_msg( port->serial->dev,
 				  usb_rcvctrlpipe(port->serial->dev, 0 ),
@@ -650,8 +657,9 @@
 	kfree(settings);
 }
 
-static int kobil_ioctl(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int kobil_ioctl(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct kobil_private * priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
 	int transfer_buffer_length = 8;
@@ -662,7 +670,7 @@
 		return 0;
 
 	switch (cmd) {
-	case TCFLSH:   // 0x540B
+	case TCFLSH:
 		transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
 		if (! transfer_buffer)
 		 	return -ENOBUFS;
@@ -680,7 +688,7 @@
 		
 		dbg("%s - port %d Send reset_all_queues (FLUSH) URB returns: %i", __func__, port->number, result);
 		kfree(transfer_buffer);
-		return (result < 0) ? -EFAULT : 0;
+		return (result < 0) ? -EIO: 0;
 	default:
 		return -ENOIOCTLCMD;
 	}
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 5fc2cef..7bce430 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -92,26 +92,25 @@
  */
 static int  mct_u232_startup	         (struct usb_serial *serial);
 static void mct_u232_shutdown	         (struct usb_serial *serial);
-static int  mct_u232_open	         (struct usb_serial_port *port,
+static int  mct_u232_open	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
-static void mct_u232_close	         (struct usb_serial_port *port,
+static void mct_u232_close	         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct file *filp);
 static void mct_u232_read_int_callback   (struct urb *urb);
-static void mct_u232_set_termios         (struct usb_serial_port *port,
+static void mct_u232_set_termios         (struct tty_struct *tty,
+					  struct usb_serial_port *port,
 					  struct ktermios * old);
-static int  mct_u232_ioctl	         (struct usb_serial_port *port,
-					  struct file * file,
-					  unsigned int cmd,
-					  unsigned long arg);
-static void mct_u232_break_ctl	         (struct usb_serial_port *port,
+static void mct_u232_break_ctl	         (struct tty_struct *tty,
 					  int break_state );
-static int  mct_u232_tiocmget		 (struct usb_serial_port *port,
+static int  mct_u232_tiocmget		 (struct tty_struct *tty,
 					  struct file *file);
-static int  mct_u232_tiocmset		 (struct usb_serial_port *port,
+static int  mct_u232_tiocmset		 (struct tty_struct *tty,
 					  struct file *file, unsigned int set,
 					  unsigned int clear);
-static void mct_u232_throttle		 (struct usb_serial_port *port);
-static void mct_u232_unthrottle		 (struct usb_serial_port *port);
+static void mct_u232_throttle		 (struct tty_struct *tty);
+static void mct_u232_unthrottle		 (struct tty_struct *tty);
 
 
 /*
@@ -149,7 +148,6 @@
 	.throttle =	     mct_u232_throttle,
 	.unthrottle =	     mct_u232_unthrottle,
 	.read_int_callback = mct_u232_read_int_callback,
-	.ioctl =	     mct_u232_ioctl,
 	.set_termios =	     mct_u232_set_termios,
 	.break_ctl =	     mct_u232_break_ctl,
 	.tiocmget =	     mct_u232_tiocmget,
@@ -224,8 +222,8 @@
 	}
 }
 
-static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_port *port,
-				  speed_t value)
+static int mct_u232_set_baud_rate(struct tty_struct *tty,
+	struct usb_serial *serial, struct usb_serial_port *port, speed_t value)
 {
 	__le32 divisor;
         int rc;
@@ -243,7 +241,7 @@
 	if (rc < 0)	/*FIXME: What value speed results */
 		err("Set BAUD RATE %d failed (error = %d)", value, rc);
 	else
-		tty_encode_baud_rate(port->tty, speed, speed);
+		tty_encode_baud_rate(tty, speed, speed);
 	dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
 
 	/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
@@ -272,7 +270,7 @@
 		err("Sending USB device request code %d failed (error = %d)", 
 		    MCT_U232_SET_UNKNOWN1_REQUEST, rc);
 
-	if (port && C_CRTSCTS(port->tty)) {
+	if (port && C_CRTSCTS(tty)) {
 	   cts_enable_byte = 1;
 	}
 
@@ -411,7 +409,8 @@
 	}
 } /* mct_u232_shutdown */
 
-static int  mct_u232_open (struct usb_serial_port *port, struct file *filp)
+static int  mct_u232_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
@@ -437,7 +436,7 @@
 	 * either.
 	 */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (port->tty->termios->c_cflag & CBAUD)
+	if (tty && (tty->termios->c_cflag & CBAUD))
 		priv->control_state = TIOCM_DTR | TIOCM_RTS;
 	else
 		priv->control_state = 0;
@@ -481,15 +480,16 @@
 } /* mct_u232_open */
 
 
-static void mct_u232_close (struct usb_serial_port *port, struct file *filp)
+static void mct_u232_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	unsigned int c_cflag;
 	unsigned int control_state;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	dbg("%s port %d", __func__, port->number);
 
-   	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+   	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		mutex_lock(&port->serial->disc_mutex);
 		if (c_cflag & HUPCL && !port->serial->disconnected) {
 			/* drop DTR and RTS */
@@ -553,7 +553,7 @@
 	 */
 	if (urb->transfer_buffer_length > 2) {
 		int i;
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			for (i = 0; i < urb->actual_length ; ++i) {
 				tty_insert_flip_char(tty, data[i], 0);
@@ -583,7 +583,7 @@
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & MCT_U232_LSR_ERR) {
-		tty = port->tty;
+		tty = port->port.tty;
 		/* Overrun Error */
 		if (priv->last_lsr & MCT_U232_LSR_OE) {
 		}
@@ -606,12 +606,13 @@
 		     __func__, retval);
 } /* mct_u232_read_int_callback */
 
-static void mct_u232_set_termios (struct usb_serial_port *port,
+static void mct_u232_set_termios (struct tty_struct *tty,
+				  struct usb_serial_port *port,
 				  struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
-	struct ktermios *termios = port->tty->termios;
+	struct ktermios *termios = tty->termios;
 	unsigned int cflag = termios->c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned long flags;
@@ -638,7 +639,7 @@
 		mct_u232_set_modem_ctrl(serial, control_state);
 	}
 
-	mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty));
+	mct_u232_set_baud_rate(tty, serial, port, tty_get_baud_rate(tty));
 
 	if ((cflag & CBAUD) == B0 ) {
 		dbg("%s: baud is B0", __func__);
@@ -689,8 +690,9 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 } /* mct_u232_set_termios */
 
-static void mct_u232_break_ctl( struct usb_serial_port *port, int break_state )
+static void mct_u232_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned char lcr;
@@ -709,8 +711,9 @@
 } /* mct_u232_break_ctl */
 
 
-static int mct_u232_tiocmget (struct usb_serial_port *port, struct file *file)
+static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
 	unsigned long flags;
@@ -724,9 +727,10 @@
 	return control_state;
 }
 
-static int mct_u232_tiocmset (struct usb_serial_port *port, struct file *file,
+static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
 			      unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned int control_state;
@@ -751,73 +755,46 @@
 	return mct_u232_set_modem_ctrl(serial, control_state);
 }
 
-static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file,
-			   unsigned int cmd, unsigned long arg)
+static void mct_u232_throttle(struct tty_struct *tty)
 {
-	dbg("%scmd=0x%x", __func__, cmd);
-
-	/* Based on code from acm.c and others */
-	switch (cmd) {
-	case TIOCMIWAIT:
-		/* wait for any of the 4 modem inputs (DCD,RI,DSR,CTS)*/
-		/* TODO */
-		return( 0 );
-
-	case TIOCGICOUNT:
-		/* return count of modemline transitions */
-		/* TODO */
-		return 0;
-
-	default:
-		dbg("%s: arg not supported - 0x%04x", __func__,cmd);
-		return(-ENOIOCTLCMD);
-		break;
-	}
-	return 0;
-} /* mct_u232_ioctl */
-
-static void mct_u232_throttle (struct usb_serial_port *port)
-{
+	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int control_state;
-	struct tty_struct *tty;
 
-	tty = port->tty;
 	dbg("%s - port %d", __func__, port->number);
 
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->rx_flags |= THROTTLED;
 	if (C_CRTSCTS(tty)) {
-	  priv->control_state &= ~TIOCM_RTS;
-	  control_state = priv->control_state;
-	  spin_unlock_irqrestore(&priv->lock, flags);
-	  (void) mct_u232_set_modem_ctrl(port->serial, control_state);
+		priv->control_state &= ~TIOCM_RTS;
+		control_state = priv->control_state;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-	  spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 }
 
 
-static void mct_u232_unthrottle (struct usb_serial_port *port)
+static void mct_u232_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct mct_u232_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int control_state;
-	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
 
-	tty = port->tty;
 	spin_lock_irqsave(&priv->lock, flags);
 	if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
-	  priv->rx_flags &= ~THROTTLED;
-	  priv->control_state |= TIOCM_RTS;
-	  control_state = priv->control_state;
-	  spin_unlock_irqrestore(&priv->lock, flags);
-	  (void) mct_u232_set_modem_ctrl(port->serial, control_state);
+		priv->rx_flags &= ~THROTTLED;
+		priv->control_state |= TIOCM_RTS;
+		control_state = priv->control_state;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		(void) mct_u232_set_modem_ctrl(port->serial, control_state);
 	} else {
-	  spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 }
 
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 50f1fe2..d47f081 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -218,7 +218,7 @@
 
 	data = urb->transfer_buffer;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -264,7 +264,7 @@
 
 	dbg("Entering .........");
 
-	tty = mos7720_port->port->tty;
+	tty = mos7720_port->port->port.tty;
 
 	if (tty && mos7720_port->open)
 		tty_wakeup(tty);
@@ -320,7 +320,8 @@
 	return status;
 }
 
-static int mos7720_open(struct usb_serial_port *port, struct file * filp)
+static int mos7720_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct usb_serial *serial;
 	struct usb_serial_port *port0;
@@ -443,14 +444,12 @@
 	data = 0x0c;
 	send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
 
-//Matrix
-
 	/* force low_latency on so that our tty_push actually forces *
 	 * the data through,otherwise it is scheduled, and with      *
 	 * high data rates (like with OHCI) data can get lost.       */
 
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* see if we've set up our endpoint info yet   *
 	 * (can't set it up in mos7720_startup as the  *
@@ -515,8 +514,9 @@
  *	system,
  *	Otherwise we return a negative error number.
  */
-static int mos7720_chars_in_buffer(struct usb_serial_port *port)
+static int mos7720_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int i;
 	int chars = 0;
 	struct moschip_port *mos7720_port;
@@ -537,7 +537,8 @@
 	return chars;
 }
 
-static void mos7720_close(struct usb_serial_port *port, struct file *filp)
+static void mos7720_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
@@ -588,8 +589,9 @@
 	dbg("Leaving %s", __func__);
 }
 
-static void mos7720_break(struct usb_serial_port *port, int break_state)
+static void mos7720_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
         unsigned char data;
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
@@ -621,8 +623,9 @@
  *	If successful, we return the amount of room that we have for this port
  *	Otherwise we return a negative error number.
  */
-static int mos7720_write_room(struct usb_serial_port *port)
+static int mos7720_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port;
 	int room = 0;
 	int i;
@@ -645,8 +648,8 @@
 	return room;
 }
 
-static int mos7720_write(struct usb_serial_port *port,
-			 const unsigned char *data, int count)
+static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
+				 const unsigned char *data, int count)
 {
 	int status;
 	int i;
@@ -719,10 +722,10 @@
 	return bytes_sent;
 }
 
-static void mos7720_throttle(struct usb_serial_port *port)
+static void mos7720_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port;
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s- port %d\n", __func__, port->number);
@@ -739,16 +742,10 @@
 
 	dbg("%s: Entering ..........", __func__);
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = mos7720_write(port, &stop_char, 1);
+		status = mos7720_write(tty, port, &stop_char, 1);
 		if (status <= 0)
 			return;
 	}
@@ -764,11 +761,11 @@
 	}
 }
 
-static void mos7720_unthrottle(struct usb_serial_port *port)
+static void mos7720_unthrottle(struct tty_struct *tty)
 {
-	struct tty_struct *tty;
-	int status;
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port = usb_get_serial_port_data(port);
+	int status;
 
 	if (mos7720_port == NULL)
 		return;
@@ -780,16 +777,10 @@
 
 	dbg("%s: Entering ..........", __func__);
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = mos7720_write(port, &start_char, 1);
+		status = mos7720_write(tty, port, &start_char, 1);
 		if (status <= 0)
 			return;
 	}
@@ -1011,12 +1002,12 @@
  *	This routine is called to set the UART on the device to match
  *      the specified new settings.
  */
-static void change_port_settings(struct moschip_port *mos7720_port,
+static void change_port_settings(struct tty_struct *tty,
+				 struct moschip_port *mos7720_port,
 				 struct ktermios *old_termios)
 {
 	struct usb_serial_port *port;
 	struct usb_serial *serial;
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	unsigned iflag;
@@ -1042,8 +1033,6 @@
 		return;
 	}
 
-	tty = mos7720_port->port->tty;
-
 	dbg("%s: Entering ..........", __func__);
 
 	lData = UART_LCR_WLEN8;
@@ -1198,14 +1187,13 @@
  *	this function is called by the tty driver when it wants to change the
  *	termios structure.
  */
-static void mos7720_set_termios(struct usb_serial_port *port,
-				struct ktermios *old_termios)
+static void mos7720_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	int status;
 	unsigned int cflag;
 	struct usb_serial *serial;
 	struct moschip_port *mos7720_port;
-	struct tty_struct *tty;
 
 	serial = port->serial;
 
@@ -1214,9 +1202,6 @@
 	if (mos7720_port == NULL)
 		return;
 
-	tty = port->tty;
-
-
 	if (!mos7720_port->open) {
 		dbg("%s - port not opened", __func__);
 		return;
@@ -1237,7 +1222,7 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	/* change the port settings to the new ones specified */
-	change_port_settings(mos7720_port, old_termios);
+	change_port_settings(tty, mos7720_port, old_termios);
 
 	if(!port->read_urb) {
 		dbg("%s","URB KILLED !!!!!\n");
@@ -1264,13 +1249,13 @@
  * 	    transmit holding register is empty.  This functionality
  * 	    allows an RS485 driver to be written in user space.
  */
-static int get_lsr_info(struct moschip_port *mos7720_port,
+static int get_lsr_info(struct tty_struct *tty, struct moschip_port *mos7720_port,
 			unsigned int __user *value)
 {
 	int count;
 	unsigned int result = 0;
 
-	count = mos7720_chars_in_buffer(mos7720_port->port);
+	count = mos7720_chars_in_buffer(tty);
 	if (count == 0) {
 		dbg("%s -- Empty", __func__);
 		result = TIOCSER_TEMT;
@@ -1290,7 +1275,7 @@
 				  unsigned int __user *value)
 {
 	unsigned int result = 0;
-	struct tty_struct *tty = mos7720_port->port->tty;
+	struct tty_struct *tty = mos7720_port->port->port.tty;
 
 	if (!tty)
 		return -ENOIOCTLCMD;
@@ -1407,9 +1392,10 @@
 	return 0;
 }
 
-static int mos7720_ioctl(struct usb_serial_port *port, struct file *file,
+static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7720_port;
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -1431,9 +1417,10 @@
 
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
-		return get_lsr_info(mos7720_port, (unsigned int __user *)arg);
+		return get_lsr_info(tty, mos7720_port, (unsigned int __user *)arg);
 		return 0;
 
+	/* FIXME: These should be using the mode methods */
 	case TIOCMBIS:
 	case TIOCMBIC:
 	case TIOCMSET:
@@ -1452,10 +1439,6 @@
 		return get_serial_info(mos7720_port,
 				       (struct serial_struct __user *)arg);
 
-	case TIOCSSERIAL:
-		dbg("%s (%d) TIOCSSERIAL", __func__,  port->number);
-		break;
-
 	case TIOCMIWAIT:
 		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
 		cprev = mos7720_port->icount;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 78f2f6d..2b1fded 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -710,7 +710,7 @@
 	dbg("%s", "Entering ........... \n");
 
 	if (urb->actual_length) {
-		tty = mos7840_port->port->tty;
+		tty = mos7840_port->port->port.tty;
 		if (tty) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
@@ -774,7 +774,7 @@
 
 	dbg("%s \n", "Entering .........");
 
-	tty = mos7840_port->port->tty;
+	tty = mos7840_port->port->port.tty;
 
 	if (tty && mos7840_port->open)
 		tty_wakeup(tty);
@@ -804,7 +804,8 @@
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_open(struct usb_serial_port *port, struct file *filp)
+static int mos7840_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int response;
 	int j;
@@ -1008,8 +1009,8 @@
 	 * the data through,otherwise it is scheduled, and with      *
 	 * high data rates (like with OHCI) data can get lost.       */
 
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 /* Check to see if we've set up our endpoint info yet    *
      * (can't set it up in mos7840_startup as the structures *
      * were not set up at that time.)                        */
@@ -1104,11 +1105,12 @@
  *	been written, but hasn't made it out the port yet)
  *	If successful, we return the number of bytes left to be written in the
  *	system,
- *	Otherwise we return a negative error number.
+ *	Otherwise we return zero.
  *****************************************************************************/
 
-static int mos7840_chars_in_buffer(struct usb_serial_port *port)
+static int mos7840_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int i;
 	int chars = 0;
 	unsigned long flags;
@@ -1118,21 +1120,19 @@
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port \n");
-		return -1;
+		return 0;
 	}
 
 	mos7840_port = mos7840_get_port_private(port);
 	if (mos7840_port == NULL) {
 		dbg("%s \n", "mos7840_break:leaving ...........");
-		return -1;
+		return 0;
 	}
 
 	spin_lock_irqsave(&mos7840_port->pool_lock,flags);
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (mos7840_port->busy[i]) {
+	for (i = 0; i < NUM_URBS; ++i)
+		if (mos7840_port->busy[i])
 			chars += URB_TRANSFER_BUFFER_SIZE;
-		}
-	}
 	spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
 	dbg("%s - returns %d", __func__, chars);
 	return chars;
@@ -1149,7 +1149,8 @@
  *		3. A timeout of 3 seconds without activity has expired
  *
  ************************************************************************/
-static void mos7840_block_until_tx_empty(struct moschip_port *mos7840_port)
+static void mos7840_block_until_tx_empty(struct tty_struct *tty,
+				struct moschip_port *mos7840_port)
 {
 	int timeout = HZ / 10;
 	int wait = 30;
@@ -1157,7 +1158,7 @@
 
 	while (1) {
 
-		count = mos7840_chars_in_buffer(mos7840_port->port);
+		count = mos7840_chars_in_buffer(tty);
 
 		/* Check for Buffer status */
 		if (count <= 0) {
@@ -1185,7 +1186,8 @@
  *	this function is called by the tty driver when a port is closed
  *****************************************************************************/
 
-static void mos7840_close(struct usb_serial_port *port, struct file *filp)
+static void mos7840_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
@@ -1226,20 +1228,17 @@
 		}
 	}
 
-	if (serial->dev) {
+	if (serial->dev)
 		/* flush and block until tx is empty */
-		mos7840_block_until_tx_empty(mos7840_port);
-	}
+		mos7840_block_until_tx_empty(tty, mos7840_port);
 
 	/* While closing port, shutdown all bulk read, write  *
 	 * and interrupt read if they exists                  */
 	if (serial->dev) {
-
 		if (mos7840_port->write_urb) {
 			dbg("%s", "Shutdown bulk write\n");
 			usb_kill_urb(mos7840_port->write_urb);
 		}
-
 		if (mos7840_port->read_urb) {
 			dbg("%s", "Shutdown bulk read\n");
 			usb_kill_urb(mos7840_port->read_urb);
@@ -1247,11 +1246,10 @@
 		if ((&mos7840_port->control_urb)) {
 			dbg("%s", "Shutdown control read\n");
 			//      usb_kill_urb (mos7840_port->control_urb);
-
 		}
 	}
-//              if(mos7840_port->ctrl_buf != NULL)
-//                      kfree(mos7840_port->ctrl_buf);
+//      if(mos7840_port->ctrl_buf != NULL)
+//              kfree(mos7840_port->ctrl_buf);
 	port0->open_ports--;
 	dbg("mos7840_num_open_ports in close%d:in port%d\n",
 	    port0->open_ports, port->number);
@@ -1293,15 +1291,15 @@
  *
  ************************************************************************/
 
-static void mos7840_block_until_chase_response(struct moschip_port
-					       *mos7840_port)
+static void mos7840_block_until_chase_response(struct tty_struct *tty,
+					struct moschip_port *mos7840_port)
 {
 	int timeout = 1 * HZ;
 	int wait = 10;
 	int count;
 
 	while (1) {
-		count = mos7840_chars_in_buffer(mos7840_port->port);
+		count = mos7840_chars_in_buffer(tty);
 
 		/* Check for Buffer status */
 		if (count <= 0) {
@@ -1328,8 +1326,9 @@
  * mos7840_break
  *	this function sends a break to the port
  *****************************************************************************/
-static void mos7840_break(struct usb_serial_port *port, int break_state)
+static void mos7840_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned char data;
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
@@ -1354,17 +1353,14 @@
 		return;
 	}
 
-	if (serial->dev) {
-
+	if (serial->dev)
 		/* flush and block until tx is empty */
-		mos7840_block_until_chase_response(mos7840_port);
-	}
+		mos7840_block_until_chase_response(tty, mos7840_port);
 
-	if (break_state == -1) {
+	if (break_state == -1)
 		data = mos7840_port->shadowLCR | LCR_SET_BREAK;
-	} else {
+	else
 		data = mos7840_port->shadowLCR & ~LCR_SET_BREAK;
-	}
 
 	mos7840_port->shadowLCR = data;
 	dbg("mcs7840_break mos7840_port->shadowLCR is %x\n",
@@ -1383,8 +1379,9 @@
  *	Otherwise we return a negative error number.
  *****************************************************************************/
 
-static int mos7840_write_room(struct usb_serial_port *port)
+static int mos7840_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int i;
 	int room = 0;
 	unsigned long flags;
@@ -1426,7 +1423,7 @@
  *      return a negative error number.
  *****************************************************************************/
 
-static int mos7840_write(struct usb_serial_port *port,
+static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *data, int count)
 {
 	int status;
@@ -1555,8 +1552,7 @@
 	mos7840_port->icount.tx += transfer_size;
 	smp_wmb();
 	dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
-      exit:
-
+exit:
 	return bytes_sent;
 
 }
@@ -1567,10 +1563,10 @@
  *	being read from the port.
  *****************************************************************************/
 
-static void mos7840_throttle(struct usb_serial_port *port)
+static void mos7840_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7840_port;
-	struct tty_struct *tty;
 	int status;
 
 	if (mos7840_port_paranoia_check(port, __func__)) {
@@ -1592,32 +1588,21 @@
 
 	dbg("%s", "Entering .......... \n");
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the stop character */
 	if (I_IXOFF(tty)) {
 		unsigned char stop_char = STOP_CHAR(tty);
-		status = mos7840_write(port, &stop_char, 1);
-		if (status <= 0) {
+		status = mos7840_write(tty, port, &stop_char, 1);
+		if (status <= 0)
 			return;
-		}
 	}
-
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR &= ~MCR_RTS;
 		status = 0;
-		status =
-		    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
-
-		if (status < 0) {
+		if (status < 0)
 			return;
-		}
 	}
 
 	return;
@@ -1628,9 +1613,9 @@
  *	this function is called by the tty driver when it wants to resume the data
  *	being read from the port (called after SerialThrottle is called)
  *****************************************************************************/
-static void mos7840_unthrottle(struct usb_serial_port *port)
+static void mos7840_unthrottle(struct tty_struct *tty)
 {
-	struct tty_struct *tty;
+	struct usb_serial_port *port = tty->driver_data;
 	int status;
 	struct moschip_port *mos7840_port = mos7840_get_port_private(port);
 
@@ -1649,38 +1634,28 @@
 
 	dbg("%s", "Entering .......... \n");
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
 	/* if we are implementing XON/XOFF, send the start character */
 	if (I_IXOFF(tty)) {
 		unsigned char start_char = START_CHAR(tty);
-		status = mos7840_write(port, &start_char, 1);
-		if (status <= 0) {
+		status = mos7840_write(tty, port, &start_char, 1);
+		if (status <= 0)
 			return;
-		}
 	}
 
 	/* if we are implementing RTS/CTS, toggle that line */
 	if (tty->termios->c_cflag & CRTSCTS) {
 		mos7840_port->shadowMCR |= MCR_RTS;
 		status = 0;
-		status =
-		    mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
+		status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
 					 mos7840_port->shadowMCR);
-		if (status < 0) {
+		if (status < 0)
 			return;
-		}
 	}
-
-	return;
 }
 
-static int mos7840_tiocmget(struct usb_serial_port *port, struct file *file)
+static int mos7840_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7840_port;
 	unsigned int result;
 	__u16 msr;
@@ -1708,9 +1683,10 @@
 	return result;
 }
 
-static int mos7840_tiocmset(struct usb_serial_port *port, struct file *file,
+static int mos7840_tiocmset(struct tty_struct *tty, struct file *file,
 			    unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct moschip_port *mos7840_port;
 	unsigned int mcr;
 	int status;
@@ -1949,10 +1925,9 @@
  *      the specified new settings.
  *****************************************************************************/
 
-static void mos7840_change_port_settings(struct moschip_port *mos7840_port,
-					 struct ktermios *old_termios)
+static void mos7840_change_port_settings(struct tty_struct *tty,
+	struct moschip_port *mos7840_port, struct ktermios *old_termios)
 {
-	struct tty_struct *tty;
 	int baud;
 	unsigned cflag;
 	unsigned iflag;
@@ -1988,8 +1963,6 @@
 		return;
 	}
 
-	tty = mos7840_port->port->tty;
-
 	dbg("%s", "Entering .......... \n");
 
 	lData = LCR_BITS_8;
@@ -2131,14 +2104,14 @@
  *	the termios structure
  *****************************************************************************/
 
-static void mos7840_set_termios(struct usb_serial_port *port,
+static void mos7840_set_termios(struct tty_struct *tty,
+				struct usb_serial_port *port,
 				struct ktermios *old_termios)
 {
 	int status;
 	unsigned int cflag;
 	struct usb_serial *serial;
 	struct moschip_port *mos7840_port;
-	struct tty_struct *tty;
 	dbg("mos7840_set_termios: START\n");
 	if (mos7840_port_paranoia_check(port, __func__)) {
 		dbg("%s", "Invalid port \n");
@@ -2157,8 +2130,6 @@
 	if (mos7840_port == NULL)
 		return;
 
-	tty = port->tty;
-
 	if (!mos7840_port->open) {
 		dbg("%s - port not opened", __func__);
 		return;
@@ -2176,7 +2147,7 @@
 
 	/* change the port settings to the new ones specified */
 
-	mos7840_change_port_settings(mos7840_port, old_termios);
+	mos7840_change_port_settings(tty, mos7840_port, old_termios);
 
 	if (!mos7840_port->read_urb) {
 		dbg("%s", "URB KILLED !!!!!\n");
@@ -2205,13 +2176,13 @@
  * 	    allows an RS485 driver to be written in user space.
  *****************************************************************************/
 
-static int mos7840_get_lsr_info(struct moschip_port *mos7840_port,
+static int mos7840_get_lsr_info(struct tty_struct *tty,
 				unsigned int __user *value)
 {
 	int count;
 	unsigned int result = 0;
 
-	count = mos7840_chars_in_buffer(mos7840_port->port);
+	count = mos7840_chars_in_buffer(tty);
 	if (count == 0) {
 		dbg("%s -- Empty", __func__);
 		result = TIOCSER_TEMT;
@@ -2227,6 +2198,8 @@
  *      function to set modem info
  *****************************************************************************/
 
+/* FIXME: Should be using the model control hooks */
+
 static int mos7840_set_modem_info(struct moschip_port *mos7840_port,
 				  unsigned int cmd, unsigned int __user *value)
 {
@@ -2304,9 +2277,8 @@
 	__u16 msr;
 	unsigned int mcr = mos7840_port->shadowMCR;
 	int status = 0;
-	status =
-	    mos7840_get_uart_reg(mos7840_port->port, MODEM_STATUS_REGISTER,
-				 &msr);
+	status = mos7840_get_uart_reg(mos7840_port->port,
+						MODEM_STATUS_REGISTER, &msr);
 	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
 	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
 	    |((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
@@ -2359,12 +2331,12 @@
  *	this function handles any ioctl calls to the driver
  *****************************************************************************/
 
-static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
+static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	void __user *argp = (void __user *)arg;
 	struct moschip_port *mos7840_port;
-	struct tty_struct *tty;
 
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -2381,8 +2353,6 @@
 	if (mos7840_port == NULL)
 		return -1;
 
-	tty = mos7840_port->port->tty;
-
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
 	switch (cmd) {
@@ -2390,9 +2360,10 @@
 
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
-		return mos7840_get_lsr_info(mos7840_port, argp);
+		return mos7840_get_lsr_info(tty, argp);
 		return 0;
 
+	/* FIXME: use the modem hooks and remove this */
 	case TIOCMBIS:
 	case TIOCMBIC:
 	case TIOCMSET:
@@ -2463,13 +2434,9 @@
 		if (copy_to_user(argp, &icount, sizeof(icount)))
 			return -EFAULT;
 		return 0;
-
-	case TIOCEXBAUD:
-		return 0;
 	default:
 		break;
 	}
-
 	return -ENOIOCTLCMD;
 }
 
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 43c8894..d673653 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -64,7 +64,7 @@
 	usb_serial_debug_data(debug, &port->dev, __func__,
 			      urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
@@ -79,7 +79,8 @@
 			__func__, result);
 }
 
-static int navman_open(struct usb_serial_port *port, struct file *filp)
+static int navman_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int result = 0;
 
@@ -96,14 +97,15 @@
 	return result;
 }
 
-static void navman_close(struct usb_serial_port *port, struct file *filp)
+static void navman_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 
 	usb_kill_urb(port->interrupt_in_urb);
 }
 
-static int navman_write(struct usb_serial_port *port,
+static int navman_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	dbg("%s - port %d", __func__, port->number);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 7b7422f..5a2d045 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -61,12 +61,12 @@
 #define BT_IGNITIONPRO_ID	0x2000  /* This one seems to be a re-branded ZyXEL device */
 
 /* function prototypes */
-static int  omninet_open		(struct usb_serial_port *port, struct file *filp);
-static void omninet_close		(struct usb_serial_port *port, struct file *filp);
+static int  omninet_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void omninet_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
 static void omninet_read_bulk_callback	(struct urb *urb);
 static void omninet_write_bulk_callback	(struct urb *urb);
-static int  omninet_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  omninet_write_room		(struct usb_serial_port *port);
+static int  omninet_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  omninet_write_room		(struct tty_struct *tty);
 static void omninet_shutdown		(struct usb_serial *serial);
 static int omninet_attach		(struct usb_serial *serial);
 
@@ -157,7 +157,8 @@
 	return 0;
 }
 
-static int omninet_open (struct usb_serial_port *port, struct file *filp)
+static int omninet_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial	*serial = port->serial;
 	struct usb_serial_port	*wport;
@@ -166,7 +167,7 @@
 	dbg("%s - port %d", __func__, port->number);
 
 	wport = serial->port[1];
-	wport->tty = port->tty;
+	wport->port.tty = tty;		/* FIXME */
 
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev, 
@@ -181,7 +182,8 @@
 	return result;
 }
 
-static void omninet_close (struct usb_serial_port *port, struct file * filp)
+static void omninet_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	dbg("%s - port %d", __func__, port->number);
 	usb_kill_urb(port->read_urb);
@@ -221,9 +223,9 @@
 
 	if (urb->actual_length && header->oh_len) {
 		for (i = 0; i < header->oh_len; i++) {
-			 tty_insert_flip_char(port->tty, data[OMNINET_DATAOFFSET + i], 0);
+			 tty_insert_flip_char(port->port.tty, data[OMNINET_DATAOFFSET + i], 0);
 	  	}
-	  	tty_flip_buffer_push(port->tty);
+	  	tty_flip_buffer_push(port->port.tty);
 	}
 
 	/* Continue trying to always read  */
@@ -238,7 +240,8 @@
 	return;
 }
 
-static int omninet_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct usb_serial 	*serial	= port->serial;
 	struct usb_serial_port 	*wport	= serial->port[1];
@@ -290,8 +293,9 @@
 }
 
 
-static int omninet_write_room (struct usb_serial_port *port)
+static int omninet_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial 	*serial = port->serial;
 	struct usb_serial_port 	*wport 	= serial->port[1];
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 1e936a1..4350990 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -43,29 +43,23 @@
 #include <linux/usb/serial.h>
 
 /* Function prototypes */
-static int  option_open(struct usb_serial_port *port, struct file *filp);
-static void option_close(struct usb_serial_port *port, struct file *filp);
+static int  option_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void option_close(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
 static int  option_startup(struct usb_serial *serial);
 static void option_shutdown(struct usb_serial *serial);
-static void option_rx_throttle(struct usb_serial_port *port);
-static void option_rx_unthrottle(struct usb_serial_port *port);
-static int  option_write_room(struct usb_serial_port *port);
+static int  option_write_room(struct tty_struct *tty);
 
 static void option_instat_callback(struct urb *urb);
 
-static int option_write(struct usb_serial_port *port,
+static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
-
-static int  option_chars_in_buffer(struct usb_serial_port *port);
-static int  option_ioctl(struct usb_serial_port *port, struct file *file,
-			unsigned int cmd, unsigned long arg);
-static void option_set_termios(struct usb_serial_port *port,
-				struct ktermios *old);
-static void option_break_ctl(struct usb_serial_port *port, int break_state);
-static int  option_tiocmget(struct usb_serial_port *port, struct file *file);
-static int  option_tiocmset(struct usb_serial_port *port, struct file *file,
+static int  option_chars_in_buffer(struct tty_struct *tty);
+static void option_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int  option_tiocmget(struct tty_struct *tty, struct file *file);
+static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
-static int  option_send_setup(struct usb_serial_port *port);
+static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *port);
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
@@ -342,11 +336,7 @@
 	.write             = option_write,
 	.write_room        = option_write_room,
 	.chars_in_buffer   = option_chars_in_buffer,
-	.throttle          = option_rx_throttle,
-	.unthrottle        = option_rx_unthrottle,
-	.ioctl             = option_ioctl,
 	.set_termios       = option_set_termios,
-	.break_ctl         = option_break_ctl,
 	.tiocmget          = option_tiocmget,
 	.tiocmset          = option_tiocmset,
 	.attach            = option_startup,
@@ -417,33 +407,18 @@
 module_init(option_init);
 module_exit(option_exit);
 
-static void option_rx_throttle(struct usb_serial_port *port)
-{
-	dbg("%s", __func__);
-}
-
-static void option_rx_unthrottle(struct usb_serial_port *port)
-{
-	dbg("%s", __func__);
-}
-
-static void option_break_ctl(struct usb_serial_port *port, int break_state)
-{
-	/* Unfortunately, I don't know how to send a break */
-	dbg("%s", __func__);
-}
-
-static void option_set_termios(struct usb_serial_port *port,
-			struct ktermios *old_termios)
+static void option_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	dbg("%s", __func__);
 	/* Doesn't support option setting */
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	option_send_setup(port);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	option_send_setup(tty, port);
 }
 
-static int option_tiocmget(struct usb_serial_port *port, struct file *file)
+static int option_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int value;
 	struct option_port_private *portdata;
 
@@ -459,9 +434,10 @@
 	return value;
 }
 
-static int option_tiocmset(struct usb_serial_port *port, struct file *file,
+static int option_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct option_port_private *portdata;
 
 	portdata = usb_get_serial_port_data(port);
@@ -476,17 +452,11 @@
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return option_send_setup(port);
-}
-
-static int option_ioctl(struct usb_serial_port *port, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	return -ENOIOCTLCMD;
+	return option_send_setup(tty, port);
 }
 
 /* Write */
-static int option_write(struct usb_serial_port *port,
+static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	struct option_port_private *portdata;
@@ -562,7 +532,7 @@
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
@@ -572,7 +542,7 @@
 		}
 
 		/* Resubmit urb so we continue receiving */
-		if (port->open_count && status != -ESHUTDOWN) {
+		if (port->port.count && status != -ESHUTDOWN) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				printk(KERN_ERR "%s: resubmit read urb failed. "
@@ -638,9 +608,9 @@
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->tty && !C_CLOCAL(port->tty) &&
+			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
 					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->tty);
+				tty_hangup(port->port.tty);
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType,req_pkt->bRequest);
@@ -658,8 +628,9 @@
 	}
 }
 
-static int option_write_room(struct usb_serial_port *port)
+static int option_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct option_port_private *portdata;
 	int i;
 	int data_len = 0;
@@ -678,8 +649,9 @@
 	return data_len;
 }
 
-static int option_chars_in_buffer(struct usb_serial_port *port)
+static int option_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct option_port_private *portdata;
 	int i;
 	int data_len = 0;
@@ -698,7 +670,8 @@
 	return data_len;
 }
 
-static int option_open(struct usb_serial_port *port, struct file *filp)
+static int option_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct option_port_private *portdata;
 	struct usb_serial *serial = port->serial;
@@ -748,14 +721,16 @@
 				usb_pipeout(urb->pipe), 0); */
 	}
 
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
-	option_send_setup(port);
+	option_send_setup(tty, port);
 
 	return (0);
 }
 
-static void option_close(struct usb_serial_port *port, struct file *filp)
+static void option_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
@@ -770,7 +745,7 @@
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected)
-			option_send_setup(port);
+			option_send_setup(tty, port);
 		mutex_unlock(&serial->disc_mutex);
 
 		/* Stop reading/writing urbs */
@@ -779,7 +754,7 @@
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
 	}
-	port->tty = NULL;
+	port->port.tty = NULL;	/* FIXME */
 }
 
 /* Helper functions used by option_setup_urbs */
@@ -841,7 +816,8 @@
  * This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
  * CDC.
 */
-static int option_send_setup(struct usb_serial_port *port)
+static int option_send_setup(struct tty_struct *tty,
+						struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct option_port_private *portdata;
@@ -850,7 +826,7 @@
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (port->tty) {
+	if (tty) {
 		int val = 0;
 		if (portdata->dtr_state)
 			val |= 0x01;
@@ -861,7 +837,6 @@
 				usb_rcvctrlpipe(serial->dev, 0),
 				0x22,0x21,val,ifNum,NULL,0,USB_CTRL_SET_TIMEOUT);
 	}
-
 	return 0;
 }
 
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index a9625c1..069d276 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -140,22 +140,23 @@
 	  && ((a)->frame_fmt == (priv)->pending_setup.frame_fmt) )
 
 /* function prototypes */
-static int oti6858_open(struct usb_serial_port *port, struct file *filp);
-static void oti6858_close(struct usb_serial_port *port, struct file *filp);
-static void oti6858_set_termios(struct usb_serial_port *port,
-				struct ktermios *old);
-static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
+static int oti6858_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void oti6858_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+static void oti6858_set_termios(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg);
 static void oti6858_read_int_callback(struct urb *urb);
 static void oti6858_read_bulk_callback(struct urb *urb);
 static void oti6858_write_bulk_callback(struct urb *urb);
-static int oti6858_write(struct usb_serial_port *port,
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count);
-static int oti6858_write_room(struct usb_serial_port *port);
-static void oti6858_break_ctl(struct usb_serial_port *port, int break_state);
-static int oti6858_chars_in_buffer(struct usb_serial_port *port);
-static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file);
-static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
+static int oti6858_write_room(struct tty_struct *tty);
+static int oti6858_chars_in_buffer(struct tty_struct *tty);
+static int oti6858_tiocmget(struct tty_struct *tty, struct file *file);
+static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
 static int oti6858_startup(struct usb_serial *serial);
 static void oti6858_shutdown(struct usb_serial *serial);
@@ -184,7 +185,6 @@
 	.close =		oti6858_close,
 	.write =		oti6858_write,
 	.ioctl =		oti6858_ioctl,
-	.break_ctl =		oti6858_break_ctl,
 	.set_termios =		oti6858_set_termios,
 	.tiocmget =		oti6858_tiocmget,
 	.tiocmset =		oti6858_tiocmset,
@@ -395,7 +395,7 @@
 	return -ENOMEM;
 }
 
-static int oti6858_write(struct usb_serial_port *port,
+static int oti6858_write(struct tty_struct *tty, struct usb_serial_port *port,
 			const unsigned char *buf, int count)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
@@ -413,8 +413,9 @@
 	return count;
 }
 
-static int oti6858_write_room(struct usb_serial_port *port)
+static int oti6858_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -428,8 +429,9 @@
 	return room;
 }
 
-static int oti6858_chars_in_buffer(struct usb_serial_port *port)
+static int oti6858_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -443,8 +445,8 @@
 	return chars;
 }
 
-static void oti6858_set_termios(struct usb_serial_port *port,
-				struct ktermios *old_termios)
+static void oti6858_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -455,22 +457,22 @@
 
 	dbg("%s(port = %d)", __func__, port->number);
 
-	if (!port->tty || !port->tty->termios) {
+	if (!tty) {
 		dbg("%s(): no tty structures", __func__);
 		return;
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->flags.termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+		tty->termios->c_ispeed = 38400;
+		tty->termios->c_ospeed = 38400;
 		priv->flags.termios_initialized = 1;
-		port->tty->termios->c_ispeed = 38400;
-		port->tty->termios->c_ospeed = 38400;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	cflag = port->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	divisor = priv->pending_setup.divisor;
@@ -500,7 +502,7 @@
 	 * guarantee that any other baud rate will work (especially
 	 * the higher ones)
 	 */
-	br = tty_get_baud_rate(port->tty);
+	br = tty_get_baud_rate(tty);
 	if (br == 0) {
 		divisor = 0;
 	} else {
@@ -511,7 +513,7 @@
 		new_divisor = (96000000 + 8 * br) / (16 * br);
 		real_br = 96000000 / (16 * new_divisor);
 		divisor = cpu_to_le16(new_divisor);
-		tty_encode_baud_rate(port->tty, real_br, real_br);
+		tty_encode_baud_rate(tty, real_br, real_br);
 	}
 
 	frame_fmt &= ~FMT_STOP_BITS_MASK;
@@ -564,7 +566,8 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int oti6858_open(struct usb_serial_port *port, struct file *filp)
+static int oti6858_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	struct ktermios tmp_termios;
@@ -578,7 +581,7 @@
 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);
 
-	if (port->open_count != 1)
+	if (port->port.count != 1)
 		return 0;
 
 	if ((buf = kmalloc(OTI6858_CTRL_PKT_SIZE, GFP_KERNEL)) == NULL) {
@@ -617,18 +620,19 @@
 	if (result != 0) {
 		dev_err(&port->dev, "%s(): usb_submit_urb() failed"
 			       " with error %d\n", __func__, result);
-		oti6858_close(port, NULL);
+		oti6858_close(tty, port, NULL);
 		return -EPROTO;
 	}
 
 	/* setup termios */
-	if (port->tty)
-		oti6858_set_termios(port, &tmp_termios);
+	if (tty)
+		oti6858_set_termios(tty, port, &tmp_termios);
 
 	return 0;
 }
 
-static void oti6858_close(struct usb_serial_port *port, struct file *filp)
+static void oti6858_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -641,7 +645,7 @@
 	spin_lock_irqsave(&priv->lock, flags);
 	timeout = 30 * HZ;	/* PL2303_CLOSING_WAIT */
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	dbg("%s(): entering wait loop", __func__);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -654,7 +658,7 @@
 		spin_lock_irqsave(&priv->lock, flags);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 	dbg("%s(): after wait loop", __func__);
 
 	/* clear out any remaining data in the buffer */
@@ -669,7 +673,7 @@
 	/* data is in the buffer to compute a delay */
 	/* that is not unnecessarily long) */
 	/* FIXME
-	bps = tty_get_baud_rate(port->tty);
+	bps = tty_get_baud_rate(tty);
 	if (bps > 1200)
 		timeout = max((HZ*2560)/bps,HZ/10);
 	else
@@ -690,7 +694,7 @@
 	usb_kill_urb(port->interrupt_in_urb);
 
 	/*
-	if (port->tty && (port->tty->termios->c_cflag) & HUPCL) {
+	if (tty && (tty->termios->c_cflag) & HUPCL) {
 		// drop DTR and RTS
 		spin_lock_irqsave(&priv->lock, flags);
 		priv->pending_setup.control &= ~CONTROL_MASK;
@@ -699,9 +703,10 @@
 	*/
 }
 
-static int oti6858_tiocmset(struct usb_serial_port *port, struct file *file,
+static int oti6858_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -732,8 +737,9 @@
 	return 0;
 }
 
-static int oti6858_tiocmget(struct usb_serial_port *port, struct file *file)
+static int oti6858_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct oti6858_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned pin_state;
@@ -802,26 +808,15 @@
 	return 0;
 }
 
-static int oti6858_ioctl(struct usb_serial_port *port, struct file *file,
+static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
-	void __user *user_arg = (void __user *) arg;
-	unsigned int x;
+	struct usb_serial_port *port = tty->driver_data;
 
 	dbg("%s(port = %d, cmd = 0x%04x, arg = 0x%08lx)",
 				__func__, port->number, cmd, arg);
 
 	switch (cmd) {
-		case TIOCMBIS:
-			if (copy_from_user(&x, user_arg, sizeof(x)))
-				return -EFAULT;
-			return oti6858_tiocmset(port, NULL, x, 0);
-
-		case TIOCMBIC:
-			if (copy_from_user(&x, user_arg, sizeof(x)))
-				return -EFAULT;
-			return oti6858_tiocmset(port, NULL, 0, x);
-
 		case TIOCMIWAIT:
 			dbg("%s(): TIOCMIWAIT", __func__);
 			return wait_modem_info(port, arg);
@@ -834,24 +829,6 @@
 	return -ENOIOCTLCMD;
 }
 
-static void oti6858_break_ctl(struct usb_serial_port *port, int break_state)
-{
-	int state;
-
-	dbg("%s(port = %d)", __func__, port->number);
-
-	state = (break_state == 0) ? 0 : 1;
-	dbg("%s(): turning break %s", __func__, state ? "on" : "off");
-
-	/* FIXME */
-/*
-	result = usb_control_msg (serial->dev, usb_sndctrlpipe (serial->dev, 0),
-				  BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
-				  0, NULL, 0, 100);
-	if (result != 0)
-		dbg("%s(): error sending break", __func__);
- */
-}
 
 static void oti6858_shutdown(struct usb_serial *serial)
 {
@@ -1002,7 +979,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	if (status != 0) {
-		if (!port->open_count) {
+		if (!port->port.count) {
 			dbg("%s(): port is closed, exiting", __func__);
 			return;
 		}
@@ -1020,14 +997,14 @@
 		return;
 	}
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty != NULL && urb->actual_length > 0) {
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
 
 	// schedule the interrupt urb if we are still open */
-	if (port->open_count != 0) {
+	if (port->port.count != 0) {
 		port->interrupt_in_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 		if (result != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2a0dd1b..a001672 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -458,8 +458,8 @@
 	usb_serial_port_softint(port);
 }
 
-static int pl2303_write(struct usb_serial_port *port, const unsigned char *buf,
-			int count)
+static int pl2303_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *buf, int count)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -478,8 +478,9 @@
 	return count;
 }
 
-static int pl2303_write_room(struct usb_serial_port *port)
+static int pl2303_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -494,8 +495,9 @@
 	return room;
 }
 
-static int pl2303_chars_in_buffer(struct usb_serial_port *port)
+static int pl2303_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -510,8 +512,8 @@
 	return chars;
 }
 
-static void pl2303_set_termios(struct usb_serial_port *port,
-			       struct ktermios *old_termios)
+static void pl2303_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
@@ -526,11 +528,10 @@
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B9600 | CS8 | CREAD |
-					      HUPCL | CLOCAL;
-		port->tty->termios->c_ispeed = 9600;
-		port->tty->termios->c_ospeed = 9600;
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+		tty->termios->c_ispeed = 9600;
+		tty->termios->c_ospeed = 9600;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -539,16 +540,16 @@
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
 
-	if (!tty_termios_hw_change(port->tty->termios, old_termios))
+	if (!tty_termios_hw_change(tty->termios, old_termios))
 		return;
 
-	cflag = port->tty->termios->c_cflag;
+	cflag = tty->termios->c_cflag;
 
 	buf = kzalloc(7, GFP_KERNEL);
 	if (!buf) {
 		dev_err(&port->dev, "%s - out of memory.\n", __func__);
 		/* Report back no change occurred */
-		*port->tty->termios = *old_termios;
+		*tty->termios = *old_termios;
 		return;
 	}
 
@@ -569,7 +570,7 @@
 		dbg("%s - data bits = %d", __func__, buf[6]);
 	}
 
-	baud = tty_get_baud_rate(port->tty);;
+	baud = tty_get_baud_rate(tty);
 	dbg("%s - baud = %d", __func__, baud);
 	if (baud) {
 		buf[0] = baud & 0xff;
@@ -646,12 +647,13 @@
 
 	/* FIXME: Need to read back resulting baud rate */
 	if (baud)
-		tty_encode_baud_rate(port->tty, baud, baud);
+		tty_encode_baud_rate(tty, baud, baud);
 
 	kfree(buf);
 }
 
-static void pl2303_close(struct usb_serial_port *port, struct file *filp)
+static void pl2303_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -666,7 +668,7 @@
 	spin_lock_irqsave(&priv->lock, flags);
 	timeout = PL2303_CLOSING_WAIT;
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (pl2303_buf_data_avail(priv->buf) == 0 ||
@@ -678,7 +680,7 @@
 		spin_lock_irqsave(&priv->lock, flags);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 	/* clear out any remaining data in the buffer */
 	pl2303_buf_clear(priv->buf);
 	spin_unlock_irqrestore(&priv->lock, flags);
@@ -690,7 +692,7 @@
 	/* for lower rates we should really know how much */
 	/* data is in the buffer to compute a delay */
 	/* that is not unnecessarily long) */
-	bps = tty_get_baud_rate(port->tty);
+	bps = tty_get_baud_rate(tty);
 	if (bps > 1200)
 		timeout = max((HZ*2560)/bps,HZ/10);
 	else
@@ -703,8 +705,8 @@
 	usb_kill_urb(port->read_urb);
 	usb_kill_urb(port->interrupt_in_urb);
 
-	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		if (c_cflag & HUPCL) {
 			/* drop DTR and RTS */
 			spin_lock_irqsave(&priv->lock, flags);
@@ -715,7 +717,8 @@
 	}
 }
 
-static int pl2303_open(struct usb_serial_port *port, struct file *filp)
+static int pl2303_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -734,9 +737,8 @@
 	}
 
 	/* Setup termios */
-	if (port->tty) {
-		pl2303_set_termios(port, &tmp_termios);
-	}
+	if (tty)
+		pl2303_set_termios(tty, port, &tmp_termios);
 
 	//FIXME: need to assert RTS and DTR if CRTSCTS off
 
@@ -746,7 +748,7 @@
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting read urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(port, NULL);
+		pl2303_close(tty, port, NULL);
 		return -EPROTO;
 	}
 
@@ -756,15 +758,16 @@
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
 			" error %d\n", __func__, result);
-		pl2303_close(port, NULL);
+		pl2303_close(tty, port, NULL);
 		return -EPROTO;
 	}
 	return 0;
 }
 
-static int pl2303_tiocmset(struct usb_serial_port *port, struct file *file,
+static int pl2303_tiocmset(struct tty_struct *tty, struct file *file,
 			   unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -787,8 +790,9 @@
 	return set_control_lines(port->serial->dev, control);
 }
 
-static int pl2303_tiocmget(struct usb_serial_port *port, struct file *file)
+static int pl2303_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
@@ -853,9 +857,10 @@
 	return 0;
 }
 
-static int pl2303_ioctl(struct usb_serial_port *port, struct file *file,
+static int pl2303_ioctl(struct tty_struct *tty, struct file *file,
 			unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
@@ -871,8 +876,9 @@
 	return -ENOIOCTLCMD;
 }
 
-static void pl2303_break_ctl(struct usb_serial_port *port, int break_state)
+static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial = port->serial;
 	u16 state;
 	int result;
@@ -1001,7 +1007,7 @@
 
 	if (status) {
 		dbg("%s - urb status = %d", __func__, status);
-		if (!port->open_count) {
+		if (!port->port.count) {
 			dbg("%s - port is closed, exiting.", __func__);
 			return;
 		}
@@ -1044,7 +1050,7 @@
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -1056,7 +1062,7 @@
 	}
 
 	/* Schedule the next read _if_ we are still open */
-	if (port->open_count) {
+	if (port->port.count) {
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result)
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 94bddf0..f823e4d 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -229,8 +229,8 @@
 			int actual_length = data[length - 2] >> 2;
 			if (actual_length <= (length - 2)) {
 				info ("%s - actual: %d", __func__, actual_length);
-				tty_insert_flip_string(port->tty, data, actual_length);
-				tty_flip_buffer_push (port->tty);
+				tty_insert_flip_string(port->port.tty, data, actual_length);
+				tty_flip_buffer_push (port->port.tty);
 			} else {
 				err ("%s - inconsistent lengths %d:%d", __func__,
 				     actual_length, length);
@@ -239,8 +239,8 @@
 			err ("%s - bad CRC %x", __func__, fcs);
 		}
 	} else {
-		tty_insert_flip_string(port->tty, data, length);
-		tty_flip_buffer_push (port->tty);
+		tty_insert_flip_string(port->port.tty, data, length);
+		tty_flip_buffer_push (port->port.tty);
 	}
 
 	/* Continue trying to always read  */
@@ -255,7 +255,8 @@
 	}
 }
 
-static int safe_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	unsigned char *data;
 	int result;
@@ -349,8 +350,9 @@
 	return (count);
 }
 
-static int safe_write_room (struct usb_serial_port *port)
+static int safe_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	int room = 0;		/* Default: no room */
 	unsigned long flags;
 
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 29074c1..892020d 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -250,7 +250,8 @@
 	int ri_state;
 };
 
-static int sierra_send_setup(struct usb_serial_port *port)
+static int sierra_send_setup(struct tty_struct *tty,
+						struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
@@ -260,7 +261,7 @@
 
 	portdata = usb_get_serial_port_data(port);
 
-	if (port->tty) {
+	if (tty) {
 		int val = 0;
 		if (portdata->dtr_state)
 			val |= 0x01;
@@ -284,32 +285,17 @@
 	return 0;
 }
 
-static void sierra_rx_throttle(struct usb_serial_port *port)
+static void sierra_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	dbg("%s", __func__);
+	tty_termios_copy_hw(tty->termios, old_termios);
+	sierra_send_setup(tty, port);
 }
 
-static void sierra_rx_unthrottle(struct usb_serial_port *port)
+static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
 {
-	dbg("%s", __func__);
-}
-
-static void sierra_break_ctl(struct usb_serial_port *port, int break_state)
-{
-	/* Unfortunately, I don't know how to send a break */
-	dbg("%s", __func__);
-}
-
-static void sierra_set_termios(struct usb_serial_port *port,
-			struct ktermios *old_termios)
-{
-	dbg("%s", __func__);
-	tty_termios_copy_hw(port->tty->termios, old_termios);
-	sierra_send_setup(port);
-}
-
-static int sierra_tiocmget(struct usb_serial_port *port, struct file *file)
-{
+	struct usb_serial_port *port = tty->driver_data;
 	unsigned int value;
 	struct sierra_port_private *portdata;
 
@@ -325,9 +311,10 @@
 	return value;
 }
 
-static int sierra_tiocmset(struct usb_serial_port *port, struct file *file,
+static int sierra_tiocmset(struct tty_struct *tty, struct file *file,
 			unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct sierra_port_private *portdata;
 
 	portdata = usb_get_serial_port_data(port);
@@ -341,13 +328,7 @@
 		portdata->rts_state = 0;
 	if (clear & TIOCM_DTR)
 		portdata->dtr_state = 0;
-	return sierra_send_setup(port);
-}
-
-static int sierra_ioctl(struct usb_serial_port *port, struct file *file,
-			unsigned int cmd, unsigned long arg)
-{
-	return -ENOIOCTLCMD;
+	return sierra_send_setup(tty, port);
 }
 
 static void sierra_outdat_callback(struct urb *urb)
@@ -374,8 +355,8 @@
 }
 
 /* Write */
-static int sierra_write(struct usb_serial_port *port,
-			const unsigned char *buf, int count)
+static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -463,7 +444,7 @@
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->tty;
+		tty = port->port.tty;
 		if (urb->actual_length) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
@@ -473,7 +454,7 @@
 		}
 
 		/* Resubmit urb so we continue receiving */
-		if (port->open_count && status != -ESHUTDOWN) {
+		if (port->port.count && status != -ESHUTDOWN) {
 			err = usb_submit_urb(urb, GFP_ATOMIC);
 			if (err)
 				dev_err(&port->dev, "resubmit read urb failed."
@@ -517,9 +498,9 @@
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->tty && !C_CLOCAL(port->tty) &&
+			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
 					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->tty);
+				tty_hangup(port->port.tty);
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
@@ -537,8 +518,9 @@
 	}
 }
 
-static int sierra_write_room(struct usb_serial_port *port)
+static int sierra_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -557,22 +539,8 @@
 	return 2048;
 }
 
-static int sierra_chars_in_buffer(struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-
-	/*
-	 * We can't really account for how much data we
-	 * have sent out, but hasn't made it through to the
-	 * device as we can't see the backend here, so just
-	 * tell the tty layer that everything is flushed.
-	 *
-	 * FIXME: should walk the outstanding urbs info
-	 */
-	return 0;
-}
-
-static int sierra_open(struct usb_serial_port *port, struct file *filp)
+static int sierra_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct sierra_port_private *portdata;
 	struct usb_serial *serial = port->serial;
@@ -612,9 +580,10 @@
 		}
 	}
 
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
-	sierra_send_setup(port);
+	sierra_send_setup(tty, port);
 
 	/* start up the interrupt endpoint if we have one */
 	if (port->interrupt_in_urb) {
@@ -626,7 +595,8 @@
 	return 0;
 }
 
-static void sierra_close(struct usb_serial_port *port, struct file *filp)
+static void sierra_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int i;
 	struct usb_serial *serial = port->serial;
@@ -641,7 +611,7 @@
 	if (serial->dev) {
 		mutex_lock(&serial->disc_mutex);
 		if (!serial->disconnected)
-			sierra_send_setup(port);
+			sierra_send_setup(tty, port);
 		mutex_unlock(&serial->disc_mutex);
 
 		/* Stop reading/writing urbs */
@@ -651,7 +621,7 @@
 
 	usb_kill_urb(port->interrupt_in_urb);
 
-	port->tty = NULL;
+	port->port.tty = NULL;	/* FIXME */
 }
 
 static int sierra_startup(struct usb_serial *serial)
@@ -754,12 +724,7 @@
 	.close             = sierra_close,
 	.write             = sierra_write,
 	.write_room        = sierra_write_room,
-	.chars_in_buffer   = sierra_chars_in_buffer,
-	.throttle          = sierra_rx_throttle,
-	.unthrottle        = sierra_rx_unthrottle,
-	.ioctl             = sierra_ioctl,
 	.set_termios       = sierra_set_termios,
-	.break_ctl         = sierra_break_ctl,
 	.tiocmget          = sierra_tiocmget,
 	.tiocmset          = sierra_tiocmset,
 	.attach            = sierra_startup,
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 55b2570..58495f5 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -448,7 +448,8 @@
 
 /* close the serial port. We should wait for data sending to device 1st and
  * then kill all urb. */
-static void spcp8x5_close(struct usb_serial_port *port, struct file *filp)
+static void spcp8x5_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -464,7 +465,7 @@
 	spin_lock_irqsave(&priv->lock, flags);
 	timeout = SPCP8x5_CLOSING_WAIT;
 	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&port->tty->write_wait, &wait);
+	add_wait_queue(&tty->write_wait, &wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (ringbuf_avail_data(priv->buf) == 0 ||
@@ -475,7 +476,7 @@
 		spin_lock_irqsave(&priv->lock, flags);
 	}
 	set_current_state(TASK_RUNNING);
-	remove_wait_queue(&port->tty->write_wait, &wait);
+	remove_wait_queue(&tty->write_wait, &wait);
 
 	/* clear out any remaining data in the buffer */
 	clear_ringbuf(priv->buf);
@@ -486,7 +487,7 @@
 	 * flow control for data rates of 1200 bps or more, for lower rates we
 	 * should really know how much data is in the buffer to compute a delay
 	 * that is not unnecessarily long) */
-	bps = tty_get_baud_rate(port->tty);
+	bps = tty_get_baud_rate(tty);
 	if (bps > 1200)
 		timeout = max((HZ*2560) / bps, HZ/10);
 	else
@@ -495,8 +496,8 @@
 	schedule_timeout(timeout);
 
 	/* clear control lines */
-	if (port->tty) {
-		c_cflag = port->tty->termios->c_cflag;
+	if (tty) {
+		c_cflag = tty->termios->c_cflag;
 		if (c_cflag & HUPCL) {
 			spin_lock_irqsave(&priv->lock, flags);
 			priv->line_control = 0;
@@ -518,14 +519,14 @@
 }
 
 /* set the serial param for transfer. we should check if we really need to
- * transfer. then if be set flow contorl we should do this too. */
-static void spcp8x5_set_termios(struct usb_serial_port *port,
-				struct ktermios *old_termios)
+ * transfer. if we set flow control we should do this too. */
+static void spcp8x5_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
-	unsigned int cflag = port->tty->termios->c_cflag;
+	unsigned int cflag = tty->termios->c_cflag;
 	unsigned int old_cflag = old_termios->c_cflag;
 	unsigned short uartdata;
 	unsigned char buf[2] = {0, 0};
@@ -533,21 +534,19 @@
 	int i;
 	u8 control;
 
-	if ((!port->tty) || (!port->tty->termios))
-		return;
-
 	/* for the 1st time call this function */
 	spin_lock_irqsave(&priv->lock, flags);
 	if (!priv->termios_initialized) {
-		*(port->tty->termios) = tty_std_termios;
-		port->tty->termios->c_cflag = B115200 | CS8 | CREAD |
-					      HUPCL | CLOCAL;
+		*(tty->termios) = tty_std_termios;
+		tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+		tty->termios->c_ispeed = 115200;
+		tty->termios->c_ospeed = 115200;
 		priv->termios_initialized = 1;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	/* check that they really want us to change something */
-	if (!tty_termios_hw_change(port->tty->termios, old_termios))
+	if (!tty_termios_hw_change(tty->termios, old_termios))
 		return;
 
 	/* set DTR/RTS active */
@@ -567,7 +566,7 @@
 	}
 
 	/* Set Baud Rate */
-	baud = tty_get_baud_rate(port->tty);;
+	baud = tty_get_baud_rate(tty);;
 	switch (baud) {
 	case 300:	buf[0] = 0x00;	break;
 	case 600:	buf[0] = 0x01;	break;
@@ -643,7 +642,8 @@
 
 /* open the serial port. do some usb system call. set termios and get the line
  * status of the device. then submit the read urb */
-static int spcp8x5_open(struct usb_serial_port *port, struct file *filp)
+static int spcp8x5_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	struct ktermios tmp_termios;
 	struct usb_serial *serial = port->serial;
@@ -665,7 +665,7 @@
 		return ret;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (port->tty->termios->c_cflag & CBAUD)
+	if (tty && (tty->termios->c_cflag & CBAUD))
 		priv->line_control = MCR_DTR | MCR_RTS;
 	else
 		priv->line_control = 0;
@@ -674,8 +674,8 @@
 	spcp8x5_set_ctrlLine(serial->dev, priv->line_control , priv->type);
 
 	/* Setup termios */
-	if (port->tty)
-		spcp8x5_set_termios(port, &tmp_termios);
+	if (tty)
+		spcp8x5_set_termios(tty, port, &tmp_termios);
 
 	spcp8x5_get_msr(serial->dev, &status, priv->type);
 
@@ -690,7 +690,7 @@
 	port->read_urb->dev = serial->dev;
 	ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (ret) {
-		spcp8x5_close(port, NULL);
+		spcp8x5_close(tty, port, NULL);
 		return -EPROTO;
 	}
 	return 0;
@@ -717,7 +717,7 @@
 
 	/* check the urb status */
 	if (urb->status) {
-		if (!port->open_count)
+		if (!port->port.count)
 			return;
 		if (urb->status == -EPROTO) {
 			/* spcp8x5 mysteriously fails with -EPROTO */
@@ -755,7 +755,7 @@
 		tty_flag = TTY_FRAME;
 	dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -767,7 +767,7 @@
 	}
 
 	/* Schedule the next read _if_ we are still open */
-	if (port->open_count) {
+	if (port->port.count) {
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb , GFP_ATOMIC);
 		if (result)
@@ -866,7 +866,7 @@
 }
 
 /* write data to ring buffer. and then start the write transfer */
-static int spcp8x5_write(struct usb_serial_port *port,
+static int spcp8x5_write(struct tty_struct *tty, struct usb_serial_port *port,
 			 const unsigned char *buf, int count)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
@@ -925,9 +925,10 @@
 	return 0;
 }
 
-static int spcp8x5_ioctl(struct usb_serial_port *port, struct file *file,
+static int spcp8x5_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
 
 	switch (cmd) {
@@ -943,9 +944,10 @@
 	return -ENOIOCTLCMD;
 }
 
-static int spcp8x5_tiocmset(struct usb_serial_port *port, struct file *file,
+static int spcp8x5_tiocmset(struct tty_struct *tty, struct file *file,
 			    unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
@@ -965,8 +967,9 @@
 	return spcp8x5_set_ctrlLine(port->serial->dev, control , priv->type);
 }
 
-static int spcp8x5_tiocmget(struct usb_serial_port *port, struct file *file)
+static int spcp8x5_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
@@ -989,8 +992,9 @@
 }
 
 /* get the avail space room in ring buffer */
-static int spcp8x5_write_room(struct usb_serial_port *port)
+static int spcp8x5_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -1003,8 +1007,9 @@
 }
 
 /* get the number of avail data in write ring buffer */
-static int spcp8x5_chars_in_buffer(struct usb_serial_port *port)
+static int spcp8x5_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a26a629..48831a7 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -70,6 +70,7 @@
 
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/firmware.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
@@ -149,21 +150,23 @@
 
 static int ti_startup(struct usb_serial *serial);
 static void ti_shutdown(struct usb_serial *serial);
-static int ti_open(struct usb_serial_port *port, struct file *file);
-static void ti_close(struct usb_serial_port *port, struct file *file);
-static int ti_write(struct usb_serial_port *port, const unsigned char *data,
-	int count);
-static int ti_write_room(struct usb_serial_port *port);
-static int ti_chars_in_buffer(struct usb_serial_port *port);
-static void ti_throttle(struct usb_serial_port *port);
-static void ti_unthrottle(struct usb_serial_port *port);
-static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
-static void ti_set_termios(struct usb_serial_port *port,
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *file);
+static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
+				struct file *file);
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+				const unsigned char *data, int count);
+static int ti_write_room(struct tty_struct *tty);
+static int ti_chars_in_buffer(struct tty_struct *tty);
+static void ti_throttle(struct tty_struct *tty);
+static void ti_unthrottle(struct tty_struct *tty);
+static int ti_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg);
+static void ti_set_termios(struct tty_struct *tty, struct usb_serial_port *port,
 	struct ktermios *old_termios);
-static int ti_tiocmget(struct usb_serial_port *port, struct file *file);
-static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
+static int ti_tiocmget(struct tty_struct *tty, struct file *file);
+static int ti_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear);
-static void ti_break(struct usb_serial_port *port, int break_state);
+static void ti_break(struct tty_struct *tty, int break_state);
 static void ti_interrupt_callback(struct urb *urb);
 static void ti_bulk_in_callback(struct urb *urb);
 static void ti_bulk_out_callback(struct urb *urb);
@@ -192,8 +195,7 @@
 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 	__u8 mask, __u8 byte);
 
-static int ti_download_firmware(struct ti_device *tdev, char *fw_name);
-
+static int ti_download_firmware(struct ti_device *tdev, int type);
 
 /* circular buffer */
 static struct circ_buf *ti_buf_alloc(void);
@@ -430,11 +432,10 @@
 
 	/* if we have only 1 configuration, download firmware */
 	if (dev->descriptor.bNumConfigurations == 1) {
-
 		if (tdev->td_is_3410)
-			status = ti_download_firmware(tdev, "ti_3410.fw");
+			status = ti_download_firmware(tdev, 3410);
 		else
-			status = ti_download_firmware(tdev, "ti_5052.fw");
+			status = ti_download_firmware(tdev, 5052);
 		if (status)
 			goto free_tdev;
 
@@ -519,7 +520,8 @@
 }
 
 
-static int ti_open(struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *file)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct ti_device *tdev;
@@ -543,9 +545,9 @@
 	if (mutex_lock_interruptible(&tdev->td_open_close_lock))
 		return -ERESTARTSYS;
 
-	if (port->tty)
-		port->tty->low_latency = 
-			(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	if (tty)
+		tty->low_latency =
+				(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 
 	port_number = port->number - port->serial->minor;
 
@@ -573,7 +575,8 @@
 		}
 	}
 
-	ti_set_termios(port, port->tty->termios);
+	if (tty)
+		ti_set_termios(tty, port, tty->termios);
 
 	dbg("%s - sending TI_OPEN_PORT", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -610,7 +613,8 @@
 	usb_clear_halt(dev, port->write_urb->pipe);
 	usb_clear_halt(dev, port->read_urb->pipe);
 
-	ti_set_termios(port, port->tty->termios);
+	if (tty)
+		ti_set_termios(tty, port, tty->termios);
 
 	dbg("%s - sending TI_OPEN_PORT (2)", __func__);
 	status = ti_command_out_sync(tdev, TI_OPEN_PORT,
@@ -661,7 +665,8 @@
 }
 
 
-static void ti_close(struct usb_serial_port *port, struct file *file)
+static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *file)
 {
 	struct ti_device *tdev;
 	struct ti_port *tport;
@@ -707,8 +712,8 @@
 }
 
 
-static int ti_write(struct usb_serial_port *port, const unsigned char *data,
-	int count)
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *data, int count)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	unsigned long flags;
@@ -733,8 +738,9 @@
 }
 
 
-static int ti_write_room(struct usb_serial_port *port)
+static int ti_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int room = 0;
 	unsigned long flags;
@@ -753,8 +759,9 @@
 }
 
 
-static int ti_chars_in_buffer(struct usb_serial_port *port)
+static int ti_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int chars = 0;
 	unsigned long flags;
@@ -773,32 +780,26 @@
 }
 
 
-static void ti_throttle(struct usb_serial_port *port)
+static void ti_throttle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
 
 	if (tport == NULL)
 		return;
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty", __func__);
-		return;
-	}
-
 	if (I_IXOFF(tty) || C_CRTSCTS(tty))
 		ti_stop_read(tport, tty);
 
 }
 
 
-static void ti_unthrottle(struct usb_serial_port *port)
+static void ti_unthrottle(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct tty_struct *tty;
 	int status;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -806,12 +807,6 @@
 	if (tport == NULL)
 		return;
 
-	tty = port->tty;
-	if (!tty) {
-		dbg("%s - no tty", __func__);
-		return;
-	}
-
 	if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 		status = ti_restart_read(tport, tty);
 		if (status)
@@ -820,9 +815,10 @@
 }
 
 
-static int ti_ioctl(struct usb_serial_port *port, struct file *file,
+static int ti_ioctl(struct tty_struct *tty, struct file *file,
 	unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	struct async_icount cnow;
 	struct async_icount cprev;
@@ -875,11 +871,10 @@
 }
 
 
-static void ti_set_termios(struct usb_serial_port *port,
-	struct ktermios *old_termios)
+static void ti_set_termios(struct tty_struct *tty,
+		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct ti_port *tport = usb_get_serial_port_data(port);
-	struct tty_struct *tty = port->tty;
 	struct ti_uart_config *config;
 	tcflag_t cflag,iflag;
 	int baud;
@@ -1008,8 +1003,9 @@
 }
 
 
-static int ti_tiocmget(struct usb_serial_port *port, struct file *file)
+static int ti_tiocmget(struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	unsigned int result;
 	unsigned int msr;
@@ -1040,9 +1036,10 @@
 }
 
 
-static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
+static int ti_tiocmset(struct tty_struct *tty, struct file *file,
 	unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	unsigned int mcr;
 	unsigned long flags;
@@ -1074,8 +1071,9 @@
 }
 
 
-static void ti_break(struct usb_serial_port *port, int break_state)
+static void ti_break(struct tty_struct *tty, int break_state)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int status;
 
@@ -1213,14 +1211,14 @@
 		return;
 	}
 
-	if (port->tty && urb->actual_length) {
+	if (port->port.tty && urb->actual_length) {
 		usb_serial_debug_data(debug, dev, __func__,
 			urb->actual_length, urb->transfer_buffer);
 
 		if (!tport->tp_is_open)
 			dbg("%s - port closed, dropping data", __func__);
 		else
-			ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer,
+			ti_recv(&urb->dev->dev, port->port.tty, urb->transfer_buffer,
 				urb->actual_length);
 
 		spin_lock(&tport->tp_lock);
@@ -1302,7 +1300,7 @@
 {
 	int count, result;
 	struct usb_serial_port *port = tport->tp_port;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;	/* FIXME */
 	unsigned long flags;
 
 
@@ -1442,8 +1440,9 @@
 		return -EFAULT;
 
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	if (port->tty)
-		port->tty->low_latency =
+	/* FIXME */
+	if (port->port.tty)
+		port->port.tty->low_latency =
 			(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	tport->tp_closing_wait = new_serial.closing_wait;
 
@@ -1477,7 +1476,7 @@
 	tport->tp_msr = msr & TI_MSR_MASK;
 
 	/* handle CTS flow control */
-	tty = tport->tp_port->tty;
+	tty = tport->tp_port->port.tty;
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & TI_MSR_CTS) {
 			tty->hw_stopped = 0;
@@ -1655,65 +1654,65 @@
 	return status;
 }
 
-
-static int ti_download_firmware(struct ti_device *tdev,
-				char *fw_name)
+static int ti_do_download(struct usb_device *dev, int pipe,
+						u8 *buffer, int size)
 {
-	const struct firmware *fw;
-	int status = 0;
-	int buffer_size;
 	int pos;
-	int len;
+	u8 cs = 0;
 	int done;
-	__u8 cs = 0;
-	__u8 *buffer;
-	struct usb_device *dev = tdev->td_serial->dev;
 	struct ti_firmware_header *header;
-	unsigned int pipe = usb_sndbulkpipe(dev,
-		tdev->td_serial->port[0]->bulk_out_endpointAddress);
-
-	buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
-
-	if (request_firmware(&fw, fw_name, &dev->dev)) {
-		dev_err(&dev->dev, "%s - failed to load firmware \"%s\"\n",
-			__func__, fw_name);
-		return -ENOENT;
-	}
-	if (fw->size > buffer_size) {
-		dev_err(&dev->dev, "%s - firmware \"%s\" is too large\n",
-			__func__, fw_name);
-		release_firmware(fw);
-		return -EINVAL;
-	}
-
-	buffer = kmalloc(buffer_size, GFP_KERNEL);
-	if (!buffer) {
-		dev_err(&dev->dev, "%s - out of memory\n", __func__);
-		release_firmware(fw);
-		return -ENOMEM;
-	}
-
-	memcpy(buffer, fw->data, fw->size);
-	memset(buffer+fw->size, 0xff, buffer_size-fw->size);
-
-	for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++)
+	int status;
+	int len;
+	
+	for(pos = sizeof(struct ti_firmware_header); pos < size; pos++)
 		cs = (__u8)(cs + buffer[pos]);
 
 	header = (struct ti_firmware_header *)buffer;
-	header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header)));
+	header->wLength = cpu_to_le16((__u16)(size 
+					- sizeof(struct ti_firmware_header)));
 	header->bCheckSum = cs;
 
 	dbg("%s - downloading firmware", __func__);
-	for (pos = 0; pos < buffer_size; pos += done) {
-		len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
-		status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000);
+	for (pos = 0; pos < size; pos += done) {
+		len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
+		status = usb_bulk_msg(dev, pipe, buffer + pos, len,
+								&done, 1000);
 		if (status)
 			break;
 	}
+	return status;
+}
 
-	kfree(buffer);
-	release_firmware(fw);
+static int ti_download_firmware(struct ti_device *tdev, int type)
+{
+	int status = -ENOMEM;
+	int buffer_size;
+	__u8 *buffer;
+	struct usb_device *dev = tdev->td_serial->dev;
+	unsigned int pipe = usb_sndbulkpipe(dev,
+		tdev->td_serial->port[0]->bulk_out_endpointAddress);
+	const struct firmware *fw_p;
+	char buf[32];
+	sprintf(buf, "ti_usb-%d.bin", type);
 
+	if (request_firmware(&fw_p, buf, &dev->dev)) {
+		dev_err(&dev->dev, "%s - firmware not found\n", __func__);
+		return -ENOENT;
+	}
+	if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
+		dev_err(&dev->dev, "%s - firmware too large\n", __func__);
+		return -ENOENT;
+	}
+
+	buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
+	buffer = kmalloc(buffer_size, GFP_KERNEL);
+	if (buffer) {
+		memcpy(buffer, fw_p->data, fw_p->size);
+		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
+		ti_do_download(dev, pipe, buffer, fw_p->size);
+		kfree(buffer);
+	}
+	release_firmware(fw_p);
 	if (status) {
 		dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __func__, status);
 		return status;
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 3537986..ffaed8a 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -143,7 +143,7 @@
 	return_serial(serial);
 
 	for (i = 0; i < serial->num_ports; ++i)
-		serial->port[i]->open_count = 0;
+		serial->port[i]->port.count = 0;
 
 	/* the ports are cleaned up and released in port_release() */
 	for (i = 0; i < serial->num_ports; ++i)
@@ -208,14 +208,14 @@
 		goto bailout_kref_put;
 	}
 	 
-	++port->open_count;
+	++port->port.count;
 
 	/* set up our port structure making the tty driver
 	 * remember our port object, and us it */
 	tty->driver_data = port;
-	port->tty = tty;
+	port->port.tty = tty;
 
-	if (port->open_count == 1) {
+	if (port->port.count == 1) {
 
 		/* lock this module before we call it
 		 * this may fail, which means we must bail out,
@@ -230,7 +230,7 @@
 			goto bailout_module_put;
 		/* only call the device specific open if this 
 		 * is the first time the port is opened */
-		retval = serial->type->open(port, filp);
+		retval = serial->type->open(tty, port, filp);
 		if (retval)
 			goto bailout_interface_put;
 	}
@@ -243,9 +243,9 @@
 bailout_module_put:
 	module_put(serial->type->driver.owner);
 bailout_mutex_unlock:
-	port->open_count = 0;
+	port->port.count = 0;
 	tty->driver_data = NULL;
-	port->tty = NULL;
+	port->port.tty = NULL;
 	mutex_unlock(&port->mutex);
 bailout_kref_put:
 	usb_serial_put(serial);
@@ -263,26 +263,26 @@
 
 	mutex_lock(&port->mutex);
 
-	if (port->open_count == 0) {
+	if (port->port.count == 0) {
 		mutex_unlock(&port->mutex);
 		return;
 	}
 
-	--port->open_count;
-	if (port->open_count == 0)
+	--port->port.count;
+	if (port->port.count == 0)
 		/* only call the device specific close if this 
 		 * port is being closed by the last owner */
-		port->serial->type->close(port, filp);
+		port->serial->type->close(tty, port, filp);
 
-	if (port->open_count == (port->console? 1 : 0)) {
-		if (port->tty) {
-			if (port->tty->driver_data)
-				port->tty->driver_data = NULL;
-			port->tty = NULL;
+	if (port->port.count == (port->console? 1 : 0)) {
+		if (port->port.tty) {
+			if (port->port.tty->driver_data)
+				port->port.tty->driver_data = NULL;
+			port->port.tty = NULL;
 		}
 	}
 
-	if (port->open_count == 0) {
+	if (port->port.count == 0) {
 		mutex_lock(&port->serial->disc_mutex);
 		if (!port->serial->disconnected)
 			usb_autopm_put_interface(port->serial->interface);
@@ -304,12 +304,12 @@
 
 	dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
 
-	/* open_count is managed under the mutex lock for the tty so cannot
+	/* count is managed under the mutex lock for the tty so cannot
            drop to zero until after the last close completes */
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 
 	/* pass on to the driver specific version of this function */
-	retval = port->serial->type->write(port, buf, count);
+	retval = port->serial->type->write(tty, port, buf, count);
 
 exit:
 	return retval;
@@ -319,9 +319,9 @@
 {
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
-	return port->serial->type->write_room(port);
+	return port->serial->type->write_room(tty);
 }
 
 static int serial_chars_in_buffer (struct tty_struct *tty) 
@@ -329,9 +329,9 @@
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s = port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
-	return port->serial->type->chars_in_buffer(port);
+	return port->serial->type->chars_in_buffer(tty);
 }
 
 static void serial_throttle (struct tty_struct * tty)
@@ -339,10 +339,10 @@
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->throttle)
-		port->serial->type->throttle(port);
+		port->serial->type->throttle(tty);
 }
 
 static void serial_unthrottle (struct tty_struct * tty)
@@ -350,10 +350,10 @@
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function */
 	if (port->serial->type->unthrottle)
-		port->serial->type->unthrottle(port);
+		port->serial->type->unthrottle(tty);
 }
 
 static int serial_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
@@ -363,12 +363,12 @@
 
 	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 
 	/* pass on to the driver specific version of this function if it is available */
 	if (port->serial->type->ioctl) {
 		lock_kernel();
-		retval = port->serial->type->ioctl(port, file, cmd, arg);
+		retval = port->serial->type->ioctl(tty, file, cmd, arg);
 		unlock_kernel();
 	}
 	else
@@ -381,10 +381,10 @@
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function if it is available */
 	if (port->serial->type->set_termios)
-		port->serial->type->set_termios(port, old);
+		port->serial->type->set_termios(tty, port, old);
 	else
 		tty_termios_copy_hw(tty->termios, old);
 }
@@ -395,11 +395,11 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	/* pass on to the driver specific version of this function if it is available */
 	if (port->serial->type->break_ctl) {
 		lock_kernel();
-		port->serial->type->break_ctl(port, break_state);
+		port->serial->type->break_ctl(tty, break_state);
 		unlock_kernel();
 	}
 }
@@ -457,9 +457,9 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmget)
-		return port->serial->type->tiocmget(port, file);
+		return port->serial->type->tiocmget(tty, file);
 	return -EINVAL;
 }
 
@@ -470,9 +470,9 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	WARN_ON(!port->open_count);
+	WARN_ON(!port->port.count);
 	if (port->serial->type->tiocmset)
-		return port->serial->type->tiocmset(port, file, set, clear);
+		return port->serial->type->tiocmset(tty, file, set, clear);
 	return -EINVAL;
 }
 
@@ -497,7 +497,7 @@
 	if (!port)
 		return;
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (!tty)
 		return;
 
@@ -1010,8 +1010,8 @@
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port) {
-			if (port->tty)
-				tty_hangup(port->tty);
+			if (port->port.tty)
+				tty_hangup(port->port.tty);
 			kill_traffic(port);
 		}
 	}
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
index 9ca4d4d..fc5d995 100644
--- a/drivers/usb/serial/usb_debug.c
+++ b/drivers/usb/serial/usb_debug.c
@@ -31,10 +31,11 @@
 	.no_dynamic_id = 	1,
 };
 
-int usb_debug_open(struct usb_serial_port *port, struct file *filp)
+int usb_debug_open(struct tty_struct *tty, struct usb_serial_port *port,
+							struct file *filp)
 {
 	port->bulk_out_size = USB_DEBUG_MAX_PACKET_SIZE;
-	return usb_serial_generic_open(port, filp);
+	return usb_serial_generic_open(tty, port, filp);
 }
 
 static struct usb_serial_driver debug_device = {
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 5fc2012..373a3c7 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -35,17 +35,15 @@
 #define DRIVER_DESC "USB HandSpring Visor / Palm OS driver"
 
 /* function prototypes for a handspring visor */
-static int  visor_open		(struct usb_serial_port *port, struct file *filp);
-static void visor_close		(struct usb_serial_port *port, struct file *filp);
-static int  visor_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  visor_write_room		(struct usb_serial_port *port);
-static int  visor_chars_in_buffer	(struct usb_serial_port *port);
-static void visor_throttle	(struct usb_serial_port *port);
-static void visor_unthrottle	(struct usb_serial_port *port);
+static int  visor_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void visor_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  visor_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  visor_write_room	(struct tty_struct *tty);
+static void visor_throttle	(struct tty_struct *tty);
+static void visor_unthrottle	(struct tty_struct *tty);
 static int  visor_probe		(struct usb_serial *serial, const struct usb_device_id *id);
 static int  visor_calc_num_ports(struct usb_serial *serial);
 static void visor_shutdown	(struct usb_serial *serial);
-static int  visor_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 static void visor_write_bulk_callback	(struct urb *urb);
 static void visor_read_bulk_callback	(struct urb *urb);
 static void visor_read_int_callback	(struct urb *urb);
@@ -198,10 +196,8 @@
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
 	.shutdown =		visor_shutdown,
-	.ioctl =		visor_ioctl,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
-	.chars_in_buffer =	visor_chars_in_buffer,
 	.write_bulk_callback =	visor_write_bulk_callback,
 	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
@@ -225,10 +221,8 @@
 	.probe =		visor_probe,
 	.calc_num_ports =	visor_calc_num_ports,
 	.shutdown =		visor_shutdown,
-	.ioctl =		visor_ioctl,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
-	.chars_in_buffer =	visor_chars_in_buffer,
 	.write_bulk_callback =	visor_write_bulk_callback,
 	.read_bulk_callback =	visor_read_bulk_callback,
 	.read_int_callback =	visor_read_int_callback,
@@ -249,10 +243,8 @@
 	.throttle =		visor_throttle,
 	.unthrottle =		visor_unthrottle,
 	.attach =		clie_3_5_startup,
-	.ioctl =		visor_ioctl,
 	.write =		visor_write,
 	.write_room =		visor_write_room,
-	.chars_in_buffer =	visor_chars_in_buffer,
 	.write_bulk_callback =	visor_write_bulk_callback,
 	.read_bulk_callback =	visor_read_bulk_callback,
 };
@@ -274,7 +266,7 @@
 /******************************************************************************
  * Handspring Visor specific driver functions
  ******************************************************************************/
-static int visor_open (struct usb_serial_port *port, struct file *filp)
+static int visor_open (struct tty_struct *tty, struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
 	struct visor_private *priv = usb_get_serial_port_data(port);
@@ -300,8 +292,8 @@
 	 * through, otherwise it is scheduled, and with high data rates (like
 	 * with OHCI) data can get lost.
 	 */
-	if (port->tty)
-		port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* Start reading from the device */
 	usb_fill_bulk_urb (port->read_urb, serial->dev,
@@ -329,7 +321,8 @@
 }
 
 
-static void visor_close (struct usb_serial_port *port, struct file * filp)
+static void visor_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned char *transfer_buffer;
@@ -361,7 +354,8 @@
 }
 
 
-static int visor_write (struct usb_serial_port *port, const unsigned char *buf, int count)
+static int visor_write(struct tty_struct *tty, struct usb_serial_port *port,
+					const unsigned char *buf, int count)
 {
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
@@ -435,8 +429,9 @@
 }
 
 
-static int visor_write_room (struct usb_serial_port *port)
+static int visor_write_room (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -460,22 +455,6 @@
 }
 
 
-static int visor_chars_in_buffer (struct usb_serial_port *port)
-{
-	dbg("%s - port %d", __func__, port->number);
-
-	/* 
-	 * We can't really account for how much data we
-	 * have sent out, but hasn't made it through to the
-	 * device, so just tell the tty layer that everything
-	 * is flushed.
-	 *
-	 * FIXME: Should walk outstanding_urbs
-	 */
-	return 0;
-}
-
-
 static void visor_write_bulk_callback (struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
@@ -520,7 +499,7 @@
 
 	usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
 
-	tty = port->tty;
+	tty = port->port.tty;
 	if (tty && urb->actual_length) {
 		available_room = tty_buffer_request_room(tty, urb->actual_length);
 		if (available_room) {
@@ -591,8 +570,9 @@
 			__func__, result);
 }
 
-static void visor_throttle (struct usb_serial_port *port)
+static void visor_throttle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -603,8 +583,9 @@
 }
 
 
-static void visor_unthrottle (struct usb_serial_port *port)
+static void visor_unthrottle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct visor_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	int result;
@@ -922,13 +903,6 @@
 	}
 }
 
-static int visor_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
-{
-	dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
-
-	return -ENOIOCTLCMD;
-}
-
 static int __init visor_init (void)
 {
 	int i, retval;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 665aa77..b07d6a5 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -142,18 +142,18 @@
 /* function prototypes for the Connect Tech WhiteHEAT serial converter */
 static int  whiteheat_attach		(struct usb_serial *serial);
 static void whiteheat_shutdown		(struct usb_serial *serial);
-static int  whiteheat_open		(struct usb_serial_port *port, struct file *filp);
-static void whiteheat_close		(struct usb_serial_port *port, struct file *filp);
-static int  whiteheat_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
-static int  whiteheat_write_room	(struct usb_serial_port *port);
-static int  whiteheat_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
-static void whiteheat_set_termios	(struct usb_serial_port *port, struct ktermios * old);
-static int  whiteheat_tiocmget		(struct usb_serial_port *port, struct file *file);
-static int  whiteheat_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
-static void whiteheat_break_ctl		(struct usb_serial_port *port, int break_state);
-static int  whiteheat_chars_in_buffer	(struct usb_serial_port *port);
-static void whiteheat_throttle		(struct usb_serial_port *port);
-static void whiteheat_unthrottle	(struct usb_serial_port *port);
+static int  whiteheat_open		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static void whiteheat_close		(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp);
+static int  whiteheat_write		(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count);
+static int  whiteheat_write_room	(struct tty_struct *tty);
+static int  whiteheat_ioctl		(struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg);
+static void whiteheat_set_termios	(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios * old);
+static int  whiteheat_tiocmget		(struct tty_struct *tty, struct file *file);
+static int  whiteheat_tiocmset		(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear);
+static void whiteheat_break_ctl		(struct tty_struct *tty, int break_state);
+static int  whiteheat_chars_in_buffer	(struct tty_struct *tty);
+static void whiteheat_throttle		(struct tty_struct *tty);
+static void whiteheat_unthrottle	(struct tty_struct *tty);
 static void whiteheat_read_callback	(struct urb *urb);
 static void whiteheat_write_callback	(struct urb *urb);
 
@@ -246,7 +246,7 @@
 static int firm_send_command(struct usb_serial_port *port, __u8 command, __u8 *data, __u8 datasize);
 static int firm_open(struct usb_serial_port *port);
 static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct usb_serial_port *port);
+static int firm_setup_port(struct tty_struct *tty);
 static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
 static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -613,7 +613,8 @@
 }
 
 
-static int whiteheat_open (struct usb_serial_port *port, struct file *filp)
+static int whiteheat_open (struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp)
 {
 	int		retval = 0;
 	struct ktermios	old_term;
@@ -624,7 +625,8 @@
 	if (retval)
 		goto exit;
 
-	port->tty->low_latency = 1;
+	if (tty)
+		tty->low_latency = 1;
 
 	/* send an open port command */
 	retval = firm_open(port);
@@ -640,9 +642,11 @@
 		goto exit;
 	}
 
-	old_term.c_cflag = ~port->tty->termios->c_cflag;
-	old_term.c_iflag = ~port->tty->termios->c_iflag;
-	whiteheat_set_termios(port, &old_term);
+	if (tty) {
+		old_term.c_cflag = ~tty->termios->c_cflag;
+		old_term.c_iflag = ~tty->termios->c_iflag;
+		whiteheat_set_termios(tty, port, &old_term);
+	}
 
 	/* Work around HCD bugs */
 	usb_clear_halt(port->serial->dev, port->read_urb->pipe);
@@ -663,7 +667,8 @@
 }
 
 
-static void whiteheat_close(struct usb_serial_port *port, struct file * filp)
+static void whiteheat_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file * filp)
 {
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct whiteheat_urb_wrap *wrap;
@@ -681,7 +686,7 @@
 	}
 	mutex_unlock(&port->serial->disc_mutex);
 
-	port->tty->closing = 1;
+	tty->closing = 1;
 
 /*
  * Not currently in use; tty_wait_until_sent() calls
@@ -689,12 +694,12 @@
  * acquisition. This should be fixed at some point. Greg's been
  * notified.
 	if ((filp->f_flags & (O_NDELAY | O_NONBLOCK)) == 0) {
-		tty_wait_until_sent(port->tty, CLOSING_DELAY);
+		tty_wait_until_sent(tty, CLOSING_DELAY);
 	}
 */
 
-	tty_driver_flush_buffer(port->tty);
-	tty_ldisc_flush(port->tty);
+	tty_driver_flush_buffer(tty);
+	tty_ldisc_flush(tty);
 
 	firm_report_tx_done(port);
 
@@ -728,11 +733,12 @@
 
 	stop_command_port(port->serial);
 
-	port->tty->closing = 0;
+	tty->closing = 0;
 }
 
 
-static int whiteheat_write(struct usb_serial_port *port, const unsigned char *buf, int count)
+static int whiteheat_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count)
 {
 	struct usb_serial *serial = port->serial;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
@@ -791,8 +797,9 @@
 }
 
 
-static int whiteheat_write_room(struct usb_serial_port *port)
+static int whiteheat_write_room(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct list_head *tmp;
 	int room = 0;
@@ -811,8 +818,9 @@
 }
 
 
-static int whiteheat_tiocmget (struct usb_serial_port *port, struct file *file)
+static int whiteheat_tiocmget (struct tty_struct *tty, struct file *file)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	unsigned int modem_signals = 0;
 
@@ -828,9 +836,10 @@
 }
 
 
-static int whiteheat_tiocmset (struct usb_serial_port *port, struct file *file,
+static int whiteheat_tiocmset (struct tty_struct *tty, struct file *file,
 			       unsigned int set, unsigned int clear)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 
 	dbg("%s - port %d", __func__, port->number);
@@ -851,8 +860,9 @@
 }
 
 
-static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
+static int whiteheat_ioctl (struct tty_struct *tty, struct file * file, unsigned int cmd, unsigned long arg)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct serial_struct serstruct;
 	void __user *user_arg = (void __user *)arg;
 
@@ -896,20 +906,21 @@
 }
 
 
-static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios)
+static void whiteheat_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	dbg("%s -port %d", __func__, port->number);
-	firm_setup_port(port);
+	firm_setup_port(tty);
 }
 
 
-static void whiteheat_break_ctl(struct usb_serial_port *port, int break_state) {
+static void whiteheat_break_ctl(struct tty_struct *tty, int break_state) {
+	struct usb_serial_port *port = tty->driver_data;
 	firm_set_break(port, break_state);
 }
 
 
-static int whiteheat_chars_in_buffer(struct usb_serial_port *port)
+static int whiteheat_chars_in_buffer(struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	struct list_head *tmp;
 	struct whiteheat_urb_wrap *wrap;
@@ -930,8 +941,9 @@
 }
 
 
-static void whiteheat_throttle (struct usb_serial_port *port)
+static void whiteheat_throttle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	unsigned long flags;
 
@@ -945,8 +957,9 @@
 }
 
 
-static void whiteheat_unthrottle (struct usb_serial_port *port)
+static void whiteheat_unthrottle (struct tty_struct *tty)
 {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_private *info = usb_get_serial_port_data(port);
 	int actually_throttled;
 	unsigned long flags;
@@ -1184,9 +1197,10 @@
 }
 
 
-static int firm_setup_port(struct usb_serial_port *port) {
+static int firm_setup_port(struct tty_struct *tty) {
+	struct usb_serial_port *port = tty->driver_data;
 	struct whiteheat_port_settings port_settings;
-	unsigned int cflag = port->tty->termios->c_cflag;
+	unsigned int cflag = tty->termios->c_cflag;
 
 	port_settings.port = port->number + 1;
 
@@ -1235,22 +1249,22 @@
 	    (port_settings.hflow & WHITEHEAT_HFLOW_DTR) ? "DTR" : "");
 	
 	/* determine software flow control */
-	if (I_IXOFF(port->tty))
+	if (I_IXOFF(tty))
 		port_settings.sflow = WHITEHEAT_SFLOW_RXTX;
 	else
 		port_settings.sflow = WHITEHEAT_SFLOW_NONE;
 	dbg("%s - software flow control = %c", __func__, port_settings.sflow);
 	
-	port_settings.xon = START_CHAR(port->tty);
-	port_settings.xoff = STOP_CHAR(port->tty);
+	port_settings.xon = START_CHAR(tty);
+	port_settings.xoff = STOP_CHAR(tty);
 	dbg("%s - XON = %2x, XOFF = %2x", __func__, port_settings.xon, port_settings.xoff);
 
 	/* get the baud rate wanted */
-	port_settings.baud = tty_get_baud_rate(port->tty);
+	port_settings.baud = tty_get_baud_rate(tty);
 	dbg("%s - baud rate = %d", __func__, port_settings.baud);
 
 	/* fixme: should set validated settings */
-	tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud);
+	tty_encode_baud_rate(tty, port_settings.baud, port_settings.baud);
 	/* handle any settings that aren't specified in the tty structure */
 	port_settings.lloop = 0;
 	
@@ -1426,7 +1440,7 @@
 	struct whiteheat_private *info =
 		container_of(work, struct whiteheat_private, rx_work);
 	struct usb_serial_port *port = info->port;
-	struct tty_struct *tty = port->tty;
+	struct tty_struct *tty = port->port.tty;
 	struct whiteheat_urb_wrap *wrap;
 	struct urb *urb;
 	unsigned long flags;
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 8f891cb..09a3e6a 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -62,7 +62,7 @@
  */
 struct usb_serial_port {
 	struct usb_serial	*serial;
-	struct tty_struct	*tty;
+	struct tty_port		port;
 	spinlock_t		lock;
 	struct mutex            mutex;
 	unsigned char		number;
@@ -89,7 +89,6 @@
 
 	wait_queue_head_t	write_wait;
 	struct work_struct	work;
-	int			open_count;
 	char			throttled;
 	char			throttle_req;
 	char			console;
@@ -217,22 +216,27 @@
 	int (*resume)(struct usb_serial *serial);
 
 	/* serial function calls */
-	int  (*open)(struct usb_serial_port *port, struct file *filp);
-	void (*close)(struct usb_serial_port *port, struct file *filp);
-	int  (*write)(struct usb_serial_port *port, const unsigned char *buf,
-		      int count);
-	int  (*write_room)(struct usb_serial_port *port);
-	int  (*ioctl)(struct usb_serial_port *port, struct file *file,
+	/* Called by console with tty = NULL and by tty */
+	int  (*open)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+	void (*close)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
+	int  (*write)(struct tty_struct *tty, struct usb_serial_port *port,
+			const unsigned char *buf, int count);
+	/* Called only by the tty layer */
+	int  (*write_room)(struct tty_struct *tty);
+	int  (*ioctl)(struct tty_struct *tty, struct file *file,
 		      unsigned int cmd, unsigned long arg);
-	void (*set_termios)(struct usb_serial_port *port, struct ktermios *old);
-	void (*break_ctl)(struct usb_serial_port *port, int break_state);
-	int  (*chars_in_buffer)(struct usb_serial_port *port);
-	void (*throttle)(struct usb_serial_port *port);
-	void (*unthrottle)(struct usb_serial_port *port);
-	int  (*tiocmget)(struct usb_serial_port *port, struct file *file);
-	int  (*tiocmset)(struct usb_serial_port *port, struct file *file,
+	void (*set_termios)(struct tty_struct *tty,
+			struct usb_serial_port *port, struct ktermios *old);
+	void (*break_ctl)(struct tty_struct *tty, int break_state);
+	int  (*chars_in_buffer)(struct tty_struct *tty);
+	void (*throttle)(struct tty_struct *tty);
+	void (*unthrottle)(struct tty_struct *tty);
+	int  (*tiocmget)(struct tty_struct *tty, struct file *file);
+	int  (*tiocmset)(struct tty_struct *tty, struct file *file,
 			 unsigned int set, unsigned int clear);
-
+	/* USB events */
 	void (*read_int_callback)(struct urb *urb);
 	void (*write_int_callback)(struct urb *urb);
 	void (*read_bulk_callback)(struct urb *urb);
@@ -270,19 +274,19 @@
 /* Functions needed by other parts of the usbserial core */
 extern struct usb_serial *usb_serial_get_by_index(unsigned int minor);
 extern void usb_serial_put(struct usb_serial *serial);
-extern int usb_serial_generic_open(struct usb_serial_port *port,
-				   struct file *filp);
-extern int usb_serial_generic_write(struct usb_serial_port *port,
-				    const unsigned char *buf, int count);
-extern void usb_serial_generic_close(struct usb_serial_port *port,
-				     struct file *filp);
+extern int usb_serial_generic_open(struct tty_struct *tty,
+		struct usb_serial_port *port, struct file *filp);
+extern int usb_serial_generic_write(struct tty_struct *tty,
+	struct usb_serial_port *port, const unsigned char *buf, int count);
+extern void usb_serial_generic_close(struct tty_struct *tty,
+			struct usb_serial_port *port, struct file *filp);
 extern int usb_serial_generic_resume(struct usb_serial *serial);
-extern int usb_serial_generic_write_room(struct usb_serial_port *port);
-extern int usb_serial_generic_chars_in_buffer(struct usb_serial_port *port);
+extern int usb_serial_generic_write_room(struct tty_struct *tty);
+extern int usb_serial_generic_chars_in_buffer(struct tty_struct *tty);
 extern void usb_serial_generic_read_bulk_callback(struct urb *urb);
 extern void usb_serial_generic_write_bulk_callback(struct urb *urb);
-extern void usb_serial_generic_throttle(struct usb_serial_port *port);
-extern void usb_serial_generic_unthrottle(struct usb_serial_port *port);
+extern void usb_serial_generic_throttle(struct tty_struct *tty);
+extern void usb_serial_generic_unthrottle(struct tty_struct *tty);
 extern void usb_serial_generic_shutdown(struct usb_serial *serial);
 extern int usb_serial_generic_register(int debug);
 extern void usb_serial_generic_deregister(void);