[RT2x00]: add driver for Ralink wireless hardware
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
new file mode 100644
index 0000000..847bd7f
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -0,0 +1,1837 @@
+/*
+ Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the
+ Free Software Foundation, Inc.,
+ 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+ Module: rt2500usb
+ Abstract: rt2500usb device specific routines.
+ Supported chipsets: RT2570.
+ */
+
+/*
+ * Set enviroment defines for rt2x00.h
+ */
+#define DRV_NAME "rt2500usb"
+
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "rt2x00.h"
+#include "rt2x00usb.h"
+#include "rt2500usb.h"
+
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2500usb_register_read and rt2500usb_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ */
+static inline void rt2500usb_register_read(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u16 *value)
+{
+ __le16 reg;
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
+ USB_VENDOR_REQUEST_IN, offset,
+ ®, sizeof(u16), REGISTER_TIMEOUT);
+ *value = le16_to_cpu(reg);
+}
+
+static inline void rt2500usb_register_multiread(const struct rt2x00_dev
+ *rt2x00dev,
+ const unsigned int offset,
+ void *value, const u16 length)
+{
+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
+ USB_VENDOR_REQUEST_IN, offset,
+ value, length, timeout);
+}
+
+static inline void rt2500usb_register_write(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int offset,
+ u16 value)
+{
+ __le16 reg = cpu_to_le16(value);
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, offset,
+ ®, sizeof(u16), REGISTER_TIMEOUT);
+}
+
+static inline void rt2500usb_register_multiwrite(const struct rt2x00_dev
+ *rt2x00dev,
+ const unsigned int offset,
+ void *value, const u16 length)
+{
+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u16));
+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
+ USB_VENDOR_REQUEST_OUT, offset,
+ value, length, timeout);
+}
+
+static u16 rt2500usb_bbp_check(const struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+ unsigned int i;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2500usb_register_read(rt2x00dev, PHY_CSR8, ®);
+ if (!rt2x00_get_field16(reg, PHY_CSR8_BUSY))
+ break;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ return reg;
+}
+
+static void rt2500usb_bbp_write(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u16 reg;
+
+ /*
+ * Wait until the BBP becomes ready.
+ */
+ reg = rt2500usb_bbp_check(rt2x00dev);
+ if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
+ ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n");
+ return;
+ }
+
+ /*
+ * Write the data into the BBP.
+ */
+ reg = 0;
+ rt2x00_set_field16(®, PHY_CSR7_DATA, value);
+ rt2x00_set_field16(®, PHY_CSR7_REG_ID, word);
+ rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 0);
+
+ rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
+}
+
+static void rt2500usb_bbp_read(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u8 *value)
+{
+ u16 reg;
+
+ /*
+ * Wait until the BBP becomes ready.
+ */
+ reg = rt2500usb_bbp_check(rt2x00dev);
+ if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
+ ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
+ return;
+ }
+
+ /*
+ * Write the request into the BBP.
+ */
+ reg = 0;
+ rt2x00_set_field16(®, PHY_CSR7_REG_ID, word);
+ rt2x00_set_field16(®, PHY_CSR7_READ_CONTROL, 1);
+
+ rt2500usb_register_write(rt2x00dev, PHY_CSR7, reg);
+
+ /*
+ * Wait until the BBP becomes ready.
+ */
+ reg = rt2500usb_bbp_check(rt2x00dev);
+ if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) {
+ ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n");
+ *value = 0xff;
+ return;
+ }
+
+ rt2500usb_register_read(rt2x00dev, PHY_CSR7, ®);
+ *value = rt2x00_get_field16(reg, PHY_CSR7_DATA);
+}
+
+static void rt2500usb_rf_write(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+{
+ u16 reg;
+ unsigned int i;
+
+ if (!word)
+ return;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2500usb_register_read(rt2x00dev, PHY_CSR10, ®);
+ if (!rt2x00_get_field16(reg, PHY_CSR10_RF_BUSY))
+ goto rf_write;
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ ERROR(rt2x00dev, "PHY_CSR10 register busy. Write failed.\n");
+ return;
+
+rf_write:
+ reg = 0;
+ rt2x00_set_field16(®, PHY_CSR9_RF_VALUE, value);
+ rt2500usb_register_write(rt2x00dev, PHY_CSR9, reg);
+
+ reg = 0;
+ rt2x00_set_field16(®, PHY_CSR10_RF_VALUE, value >> 16);
+ rt2x00_set_field16(®, PHY_CSR10_RF_NUMBER_OF_BITS, 20);
+ rt2x00_set_field16(®, PHY_CSR10_RF_IF_SELECT, 0);
+ rt2x00_set_field16(®, PHY_CSR10_RF_BUSY, 1);
+
+ rt2500usb_register_write(rt2x00dev, PHY_CSR10, reg);
+ rt2x00_rf_write(rt2x00dev, word, value);
+}
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+#define CSR_OFFSET(__word) ( CSR_REG_BASE + ((__word) * sizeof(u16)) )
+
+static void rt2500usb_read_csr(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u32 *data)
+{
+ rt2500usb_register_read(rt2x00dev, CSR_OFFSET(word), (u16 *) data);
+}
+
+static void rt2500usb_write_csr(const struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, u32 data)
+{
+ rt2500usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
+}
+
+static const struct rt2x00debug rt2500usb_rt2x00debug = {
+ .owner = THIS_MODULE,
+ .csr = {
+ .read = rt2500usb_read_csr,
+ .write = rt2500usb_write_csr,
+ .word_size = sizeof(u16),
+ .word_count = CSR_REG_SIZE / sizeof(u16),
+ },
+ .eeprom = {
+ .read = rt2x00_eeprom_read,
+ .write = rt2x00_eeprom_write,
+ .word_size = sizeof(u16),
+ .word_count = EEPROM_SIZE / sizeof(u16),
+ },
+ .bbp = {
+ .read = rt2500usb_bbp_read,
+ .write = rt2500usb_bbp_write,
+ .word_size = sizeof(u8),
+ .word_count = BBP_SIZE / sizeof(u8),
+ },
+ .rf = {
+ .read = rt2x00_rf_read,
+ .write = rt2500usb_rf_write,
+ .word_size = sizeof(u32),
+ .word_count = RF_SIZE / sizeof(u32),
+ },
+};
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2500usb_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *addr)
+{
+ __le16 reg[3];
+
+ memset(®, 0, sizeof(reg));
+ memcpy(®, addr, ETH_ALEN);
+
+ /*
+ * The MAC address is passed to us as an array of bytes,
+ * that array is little endian, so no need for byte ordering.
+ */
+ rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR2, ®, sizeof(reg));
+}
+
+static void rt2500usb_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
+{
+ __le16 reg[3];
+
+ memset(®, 0, sizeof(reg));
+ memcpy(®, bssid, ETH_ALEN);
+
+ /*
+ * The BSSID is passed to us as an array of bytes,
+ * that array is little endian, so no need for byte ordering.
+ */
+ rt2500usb_register_multiwrite(rt2x00dev, MAC_CSR5, ®, sizeof(reg));
+}
+
+static void rt2500usb_config_packet_filter(struct rt2x00_dev *rt2x00dev,
+ const unsigned int filter)
+{
+ int promisc = !!(filter & IFF_PROMISC);
+ int multicast = !!(filter & IFF_MULTICAST);
+ int broadcast = !!(filter & IFF_BROADCAST);
+ u16 reg;
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_NOT_TO_ME, !promisc);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_MULTICAST, !multicast);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_BROADCAST, !broadcast);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+}
+
+static void rt2500usb_config_type(struct rt2x00_dev *rt2x00dev, const int type)
+{
+ u16 reg;
+
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+
+ /*
+ * Apply hardware packet filter.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
+
+ if (!is_monitor_present(&rt2x00dev->interface) &&
+ (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_STA))
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 1);
+ else
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_TODS, 0);
+
+ /*
+ * If there is a non-monitor interface present
+ * the packet should be strict (even if a monitor interface is present!).
+ * When there is only 1 interface present which is in monitor mode
+ * we should start accepting _all_ frames.
+ */
+ if (is_interface_present(&rt2x00dev->interface)) {
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 1);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 1);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 1);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 1);
+ } else if (is_monitor_present(&rt2x00dev->interface)) {
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_CRC, 0);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_PHYSICAL, 0);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_CONTROL, 0);
+ rt2x00_set_field16(®, TXRX_CSR2_DROP_VERSION_ERROR, 0);
+ }
+
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+
+ /*
+ * Enable beacon config
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR20, ®);
+ rt2x00_set_field16(®, TXRX_CSR20_OFFSET,
+ (PREAMBLE + get_duration(IEEE80211_HEADER, 2)) >> 6);
+ if (type == IEEE80211_IF_TYPE_STA)
+ rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 0);
+ else
+ rt2x00_set_field16(®, TXRX_CSR20_BCN_EXPECT_WINDOW, 2);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR20, reg);
+
+ /*
+ * Enable synchronisation.
+ */
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®);
+ rt2x00_set_field16(®, TXRX_CSR18_OFFSET, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
+ if (is_interface_present(&rt2x00dev->interface)) {
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_COUNT, 1);
+ rt2x00_set_field16(®, TXRX_CSR19_TBCN, 1);
+ }
+
+ rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 0);
+ if (type == IEEE80211_IF_TYPE_IBSS || type == IEEE80211_IF_TYPE_AP)
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 2);
+ else if (type == IEEE80211_IF_TYPE_STA)
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 1);
+ else if (is_monitor_present(&rt2x00dev->interface) &&
+ !is_interface_present(&rt2x00dev->interface))
+ rt2x00_set_field16(®, TXRX_CSR19_TSF_SYNC, 0);
+
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+}
+
+static void rt2500usb_config_rate(struct rt2x00_dev *rt2x00dev, const int rate)
+{
+ struct ieee80211_conf *conf = &rt2x00dev->hw->conf;
+ u16 reg;
+ u16 value;
+ u16 preamble;
+
+ if (DEVICE_GET_RATE_FIELD(rate, PREAMBLE))
+ preamble = SHORT_PREAMBLE;
+ else
+ preamble = PREAMBLE;
+
+ reg = DEVICE_GET_RATE_FIELD(rate, RATEMASK) & DEV_BASIC_RATEMASK;
+
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR11, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®);
+ value = ((conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
+ SHORT_DIFS : DIFS) +
+ PLCP + preamble + get_duration(ACK_SIZE, 10);
+ rt2x00_set_field16(®, TXRX_CSR1_ACK_TIMEOUT, value);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR10, ®);
+ if (preamble == SHORT_PREAMBLE)
+ rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 1);
+ else
+ rt2x00_set_field16(®, TXRX_CSR10_AUTORESPOND_PREAMBLE, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR10, reg);
+}
+
+static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev,
+ const int phymode)
+{
+ struct ieee80211_hw_mode *mode;
+ struct ieee80211_rate *rate;
+
+ if (phymode == MODE_IEEE80211A)
+ rt2x00dev->curr_hwmode = HWMODE_A;
+ else if (phymode == MODE_IEEE80211B)
+ rt2x00dev->curr_hwmode = HWMODE_B;
+ else
+ rt2x00dev->curr_hwmode = HWMODE_G;
+
+ mode = &rt2x00dev->hwmodes[rt2x00dev->curr_hwmode];
+ rate = &mode->rates[mode->num_rates - 1];
+
+ rt2500usb_config_rate(rt2x00dev, rate->val2);
+
+ if (phymode == MODE_IEEE80211B) {
+ rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040);
+ } else {
+ rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c);
+ }
+}
+
+static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev,
+ const int index, const int channel,
+ const int txpower)
+{
+ struct rf_channel reg;
+
+ /*
+ * Fill rf_reg structure.
+ */
+ memcpy(®, &rt2x00dev->spec.channels[index], sizeof(reg));
+
+ /*
+ * Set TXpower.
+ */
+ rt2x00_set_field32(®.rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
+
+ /*
+ * For RT2525E we should first set the channel to half band higher.
+ */
+ if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+ static const u32 vals[] = {
+ 0x000008aa, 0x000008ae, 0x000008ae, 0x000008b2,
+ 0x000008b2, 0x000008b6, 0x000008b6, 0x000008ba,
+ 0x000008ba, 0x000008be, 0x000008b7, 0x00000902,
+ 0x00000902, 0x00000906
+ };
+
+ rt2500usb_rf_write(rt2x00dev, 2, vals[channel - 1]);
+ if (reg.rf4)
+ rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
+ }
+
+ rt2500usb_rf_write(rt2x00dev, 1, reg.rf1);
+ rt2500usb_rf_write(rt2x00dev, 2, reg.rf2);
+ rt2500usb_rf_write(rt2x00dev, 3, reg.rf3);
+ if (reg.rf4)
+ rt2500usb_rf_write(rt2x00dev, 4, reg.rf4);
+}
+
+static void rt2500usb_config_txpower(struct rt2x00_dev *rt2x00dev,
+ const int txpower)
+{
+ u32 rf3;
+
+ rt2x00_rf_read(rt2x00dev, 3, &rf3);
+ rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
+ rt2500usb_rf_write(rt2x00dev, 3, rf3);
+}
+
+static void rt2500usb_config_antenna(struct rt2x00_dev *rt2x00dev,
+ const int antenna_tx, const int antenna_rx)
+{
+ u8 r2;
+ u8 r14;
+ u16 csr5;
+ u16 csr6;
+
+ rt2500usb_bbp_read(rt2x00dev, 2, &r2);
+ rt2500usb_bbp_read(rt2x00dev, 14, &r14);
+ rt2500usb_register_read(rt2x00dev, PHY_CSR5, &csr5);
+ rt2500usb_register_read(rt2x00dev, PHY_CSR6, &csr6);
+
+ /*
+ * Configure the TX antenna.
+ */
+ switch (antenna_tx) {
+ case ANTENNA_SW_DIVERSITY:
+ case ANTENNA_HW_DIVERSITY:
+ rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 1);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 1);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 1);
+ break;
+ case ANTENNA_A:
+ rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 0);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 0);
+ break;
+ case ANTENNA_B:
+ rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK, 2);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM, 2);
+ break;
+ }
+
+ /*
+ * Configure the RX antenna.
+ */
+ switch (antenna_rx) {
+ case ANTENNA_SW_DIVERSITY:
+ case ANTENNA_HW_DIVERSITY:
+ rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 1);
+ break;
+ case ANTENNA_A:
+ rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
+ break;
+ case ANTENNA_B:
+ rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
+ break;
+ }
+
+ /*
+ * RT2525E and RT5222 need to flip TX I/Q
+ */
+ if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
+ rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 1);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 1);
+
+ /*
+ * RT2525E does not need RX I/Q Flip.
+ */
+ if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
+ rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
+ } else {
+ rt2x00_set_field16(&csr5, PHY_CSR5_CCK_FLIP, 0);
+ rt2x00_set_field16(&csr6, PHY_CSR6_OFDM_FLIP, 0);
+ }
+
+ rt2500usb_bbp_write(rt2x00dev, 2, r2);
+ rt2500usb_bbp_write(rt2x00dev, 14, r14);
+ rt2500usb_register_write(rt2x00dev, PHY_CSR5, csr5);
+ rt2500usb_register_write(rt2x00dev, PHY_CSR6, csr6);
+}
+
+static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev,
+ const int short_slot_time,
+ const int beacon_int)
+{
+ u16 reg;
+
+ rt2500usb_register_write(rt2x00dev, MAC_CSR10,
+ short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®);
+ rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, beacon_int * 4);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR18, reg);
+}
+
+static void rt2500usb_config(struct rt2x00_dev *rt2x00dev,
+ const unsigned int flags,
+ struct ieee80211_conf *conf)
+{
+ int short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
+
+ if (flags & CONFIG_UPDATE_PHYMODE)
+ rt2500usb_config_phymode(rt2x00dev, conf->phymode);
+ if (flags & CONFIG_UPDATE_CHANNEL)
+ rt2500usb_config_channel(rt2x00dev, conf->channel_val,
+ conf->channel, conf->power_level);
+ if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
+ rt2500usb_config_txpower(rt2x00dev, conf->power_level);
+ if (flags & CONFIG_UPDATE_ANTENNA)
+ rt2500usb_config_antenna(rt2x00dev, conf->antenna_sel_tx,
+ conf->antenna_sel_rx);
+ if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
+ rt2500usb_config_duration(rt2x00dev, short_slot_time,
+ conf->beacon_int);
+}
+
+/*
+ * LED functions.
+ */
+static void rt2500usb_enable_led(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR21, ®);
+ rt2x00_set_field16(®, MAC_CSR21_ON_PERIOD, 70);
+ rt2x00_set_field16(®, MAC_CSR21_OFF_PERIOD, 30);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR21, reg);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®);
+
+ if (rt2x00dev->led_mode == LED_MODE_TXRX_ACTIVITY) {
+ rt2x00_set_field16(®, MAC_CSR20_LINK, 1);
+ rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0);
+ } else if (rt2x00dev->led_mode == LED_MODE_ASUS) {
+ rt2x00_set_field16(®, MAC_CSR20_LINK, 0);
+ rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1);
+ } else {
+ rt2x00_set_field16(®, MAC_CSR20_LINK, 1);
+ rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 1);
+ }
+
+ rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
+}
+
+static void rt2500usb_disable_led(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR20, ®);
+ rt2x00_set_field16(®, MAC_CSR20_LINK, 0);
+ rt2x00_set_field16(®, MAC_CSR20_ACTIVITY, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR20, reg);
+}
+
+/*
+ * Link tuning
+ */
+static void rt2500usb_link_stats(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+
+ /*
+ * Update FCS error count from register.
+ */
+ rt2500usb_register_read(rt2x00dev, STA_CSR0, ®);
+ rt2x00dev->link.rx_failed = rt2x00_get_field16(reg, STA_CSR0_FCS_ERROR);
+
+ /*
+ * Update False CCA count from register.
+ */
+ rt2500usb_register_read(rt2x00dev, STA_CSR3, ®);
+ rt2x00dev->link.false_cca =
+ rt2x00_get_field16(reg, STA_CSR3_FALSE_CCA_ERROR);
+}
+
+static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
+{
+ u16 eeprom;
+ u16 value;
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R24_LOW);
+ rt2500usb_bbp_write(rt2x00dev, 24, value);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R25_LOW);
+ rt2500usb_bbp_write(rt2x00dev, 25, value);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_R61_LOW);
+ rt2500usb_bbp_write(rt2x00dev, 61, value);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &eeprom);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBPTUNE_VGCUPPER);
+ rt2500usb_bbp_write(rt2x00dev, 17, value);
+
+ rt2x00dev->link.vgc_level = value;
+}
+
+static void rt2500usb_link_tuner(struct rt2x00_dev *rt2x00dev)
+{
+ int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
+ u16 bbp_thresh;
+ u16 vgc_bound;
+ u16 sens;
+ u16 r24;
+ u16 r25;
+ u16 r61;
+ u16 r17_sens;
+ u8 r17;
+ u8 up_bound;
+ u8 low_bound;
+
+ /*
+ * Determine the BBP tuning threshold and correctly
+ * set BBP 24, 25 and 61.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &bbp_thresh);
+ bbp_thresh = rt2x00_get_field16(bbp_thresh, EEPROM_BBPTUNE_THRESHOLD);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &r24);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &r25);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &r61);
+
+ if ((rssi + bbp_thresh) > 0) {
+ r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_HIGH);
+ r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_HIGH);
+ r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_HIGH);
+ } else {
+ r24 = rt2x00_get_field16(r24, EEPROM_BBPTUNE_R24_LOW);
+ r25 = rt2x00_get_field16(r25, EEPROM_BBPTUNE_R25_LOW);
+ r61 = rt2x00_get_field16(r61, EEPROM_BBPTUNE_R61_LOW);
+ }
+
+ rt2500usb_bbp_write(rt2x00dev, 24, r24);
+ rt2500usb_bbp_write(rt2x00dev, 25, r25);
+ rt2500usb_bbp_write(rt2x00dev, 61, r61);
+
+ /*
+ * Read current r17 value, as well as the sensitivity values
+ * for the r17 register.
+ */
+ rt2500usb_bbp_read(rt2x00dev, 17, &r17);
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &r17_sens);
+
+ /*
+ * A too low RSSI will cause too much false CCA which will
+ * then corrupt the R17 tuning. To remidy this the tuning should
+ * be stopped (While making sure the R17 value will not exceed limits)
+ */
+ if (rssi >= -40) {
+ if (r17 != 0x60)
+ rt2500usb_bbp_write(rt2x00dev, 17, 0x60);
+ return;
+ }
+
+ /*
+ * Special big-R17 for short distance
+ */
+ if (rssi >= -58) {
+ sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_LOW);
+ if (r17 != sens)
+ rt2500usb_bbp_write(rt2x00dev, 17, sens);
+ return;
+ }
+
+ /*
+ * Special mid-R17 for middle distance
+ */
+ if (rssi >= -74) {
+ sens = rt2x00_get_field16(r17_sens, EEPROM_BBPTUNE_R17_HIGH);
+ if (r17 != sens)
+ rt2500usb_bbp_write(rt2x00dev, 17, sens);
+ return;
+ }
+
+ /*
+ * Leave short or middle distance condition, restore r17
+ * to the dynamic tuning range.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &vgc_bound);
+ vgc_bound = rt2x00_get_field16(vgc_bound, EEPROM_BBPTUNE_VGCUPPER);
+
+ low_bound = 0x32;
+ if (rssi >= -77)
+ up_bound = vgc_bound;
+ else
+ up_bound = vgc_bound - (-77 - rssi);
+
+ if (up_bound < low_bound)
+ up_bound = low_bound;
+
+ if (r17 > up_bound) {
+ rt2500usb_bbp_write(rt2x00dev, 17, up_bound);
+ rt2x00dev->link.vgc_level = up_bound;
+ } else if (rt2x00dev->link.false_cca > 512 && r17 < up_bound) {
+ rt2500usb_bbp_write(rt2x00dev, 17, ++r17);
+ rt2x00dev->link.vgc_level = r17;
+ } else if (rt2x00dev->link.false_cca < 100 && r17 > low_bound) {
+ rt2500usb_bbp_write(rt2x00dev, 17, --r17);
+ rt2x00dev->link.vgc_level = r17;
+ }
+}
+
+/*
+ * Initialization functions.
+ */
+static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0x0001,
+ USB_MODE_TEST, REGISTER_TIMEOUT);
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_SINGLE_WRITE, 0x0308,
+ 0x00f0, REGISTER_TIMEOUT);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
+ rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+
+ rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x1111);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x1e11);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®);
+ rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 1);
+ rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 1);
+ rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®);
+ rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0);
+ rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0);
+ rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 0);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR5, ®);
+ rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0, 13);
+ rt2x00_set_field16(®, TXRX_CSR5_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1, 12);
+ rt2x00_set_field16(®, TXRX_CSR5_BBP_ID1_VALID, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR5, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR6, ®);
+ rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0, 10);
+ rt2x00_set_field16(®, TXRX_CSR6_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1, 11);
+ rt2x00_set_field16(®, TXRX_CSR6_BBP_ID1_VALID, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR6, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR7, ®);
+ rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0, 7);
+ rt2x00_set_field16(®, TXRX_CSR7_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1, 6);
+ rt2x00_set_field16(®, TXRX_CSR7_BBP_ID1_VALID, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR7, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR8, ®);
+ rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0, 5);
+ rt2x00_set_field16(®, TXRX_CSR8_BBP_ID0_VALID, 1);
+ rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1, 0);
+ rt2x00_set_field16(®, TXRX_CSR8_BBP_ID1_VALID, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR8, reg);
+
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR21, 0xe78f);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR9, 0xff1d);
+
+ if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
+ return -EBUSY;
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR1, ®);
+ rt2x00_set_field16(®, MAC_CSR1_SOFT_RESET, 0);
+ rt2x00_set_field16(®, MAC_CSR1_BBP_RESET, 0);
+ rt2x00_set_field16(®, MAC_CSR1_HOST_READY, 1);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR1, reg);
+
+ if (rt2x00_get_rev(&rt2x00dev->chip) >= RT2570_VERSION_C) {
+ rt2500usb_register_read(rt2x00dev, PHY_CSR2, ®);
+ reg &= ~0x0002;
+ } else {
+ reg = 0x3002;
+ }
+ rt2500usb_register_write(rt2x00dev, PHY_CSR2, reg);
+
+ rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0002);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR22, 0x0053);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR15, 0x01ee);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR16, 0x0000);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR8, ®);
+ rt2x00_set_field16(®, MAC_CSR8_MAX_FRAME_UNIT,
+ rt2x00dev->rx->data_size);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR8, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, ®);
+ rt2x00_set_field16(®, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field16(®, TXRX_CSR0_KEY_ID, 0xff);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR18, ®);
+ rt2x00_set_field16(®, MAC_CSR18_DELAY_AFTER_BEACON, 90);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR18, reg);
+
+ rt2500usb_register_read(rt2x00dev, PHY_CSR4, ®);
+ rt2x00_set_field16(®, PHY_CSR4_LOW_RF_LE, 1);
+ rt2500usb_register_write(rt2x00dev, PHY_CSR4, reg);
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR1, ®);
+ rt2x00_set_field16(®, TXRX_CSR1_AUTO_SEQUENCE, 1);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR1, reg);
+
+ return 0;
+}
+
+static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+ unsigned int i;
+ u16 eeprom;
+ u8 value;
+ u8 reg_id;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2500usb_bbp_read(rt2x00dev, 0, &value);
+ if ((value != 0xff) && (value != 0x00))
+ goto continue_csr_init;
+ NOTICE(rt2x00dev, "Waiting for BBP register.\n");
+ udelay(REGISTER_BUSY_DELAY);
+ }
+
+ ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+ return -EACCES;
+
+continue_csr_init:
+ rt2500usb_bbp_write(rt2x00dev, 3, 0x02);
+ rt2500usb_bbp_write(rt2x00dev, 4, 0x19);
+ rt2500usb_bbp_write(rt2x00dev, 14, 0x1c);
+ rt2500usb_bbp_write(rt2x00dev, 15, 0x30);
+ rt2500usb_bbp_write(rt2x00dev, 16, 0xac);
+ rt2500usb_bbp_write(rt2x00dev, 18, 0x18);
+ rt2500usb_bbp_write(rt2x00dev, 19, 0xff);
+ rt2500usb_bbp_write(rt2x00dev, 20, 0x1e);
+ rt2500usb_bbp_write(rt2x00dev, 21, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 22, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 23, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 24, 0x80);
+ rt2500usb_bbp_write(rt2x00dev, 25, 0x50);
+ rt2500usb_bbp_write(rt2x00dev, 26, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 27, 0x23);
+ rt2500usb_bbp_write(rt2x00dev, 30, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 31, 0x2b);
+ rt2500usb_bbp_write(rt2x00dev, 32, 0xb9);
+ rt2500usb_bbp_write(rt2x00dev, 34, 0x12);
+ rt2500usb_bbp_write(rt2x00dev, 35, 0x50);
+ rt2500usb_bbp_write(rt2x00dev, 39, 0xc4);
+ rt2500usb_bbp_write(rt2x00dev, 40, 0x02);
+ rt2500usb_bbp_write(rt2x00dev, 41, 0x60);
+ rt2500usb_bbp_write(rt2x00dev, 53, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 54, 0x18);
+ rt2500usb_bbp_write(rt2x00dev, 56, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 57, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 58, 0x08);
+ rt2500usb_bbp_write(rt2x00dev, 61, 0x60);
+ rt2500usb_bbp_write(rt2x00dev, 62, 0x10);
+ rt2500usb_bbp_write(rt2x00dev, 75, 0xff);
+
+ DEBUG(rt2x00dev, "Start initialization from EEPROM...\n");
+ for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+ if (eeprom != 0xffff && eeprom != 0x0000) {
+ reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+ value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+ DEBUG(rt2x00dev, "BBP: 0x%02x, value: 0x%02x.\n",
+ reg_id, value);
+ rt2500usb_bbp_write(rt2x00dev, reg_id, value);
+ }
+ }
+ DEBUG(rt2x00dev, "...End initialization from EEPROM.\n");
+
+ return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ u16 reg;
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR2, ®);
+ rt2x00_set_field16(®, TXRX_CSR2_DISABLE_RX,
+ state == STATE_RADIO_RX_OFF);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+}
+
+static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ /*
+ * Initialize all registers.
+ */
+ if (rt2500usb_init_registers(rt2x00dev) ||
+ rt2500usb_init_bbp(rt2x00dev)) {
+ ERROR(rt2x00dev, "Register initialization failed.\n");
+ return -EIO;
+ }
+
+ rt2x00usb_enable_radio(rt2x00dev);
+
+ /*
+ * Enable LED
+ */
+ rt2500usb_enable_led(rt2x00dev);
+
+ return 0;
+}
+
+static void rt2500usb_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+ /*
+ * Disable LED
+ */
+ rt2500usb_disable_led(rt2x00dev);
+
+ rt2500usb_register_write(rt2x00dev, MAC_CSR13, 0x2121);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR14, 0x2121);
+
+ /*
+ * Disable synchronisation.
+ */
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+
+ rt2x00usb_disable_radio(rt2x00dev);
+}
+
+static int rt2500usb_set_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ u16 reg;
+ u16 reg2;
+ unsigned int i;
+ char put_to_sleep;
+ char bbp_state;
+ char rf_state;
+
+ put_to_sleep = (state != STATE_AWAKE);
+
+ reg = 0;
+ rt2x00_set_field16(®, MAC_CSR17_BBP_DESIRE_STATE, state);
+ rt2x00_set_field16(®, MAC_CSR17_RF_DESIRE_STATE, state);
+ rt2x00_set_field16(®, MAC_CSR17_PUT_TO_SLEEP, put_to_sleep);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
+ rt2x00_set_field16(®, MAC_CSR17_SET_STATE, 1);
+ rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
+
+ /*
+ * Device is not guaranteed to be in the requested state yet.
+ * We must wait until the register indicates that the
+ * device has entered the correct state.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+ rt2500usb_register_read(rt2x00dev, MAC_CSR17, ®2);
+ bbp_state = rt2x00_get_field16(reg2, MAC_CSR17_BBP_CURR_STATE);
+ rf_state = rt2x00_get_field16(reg2, MAC_CSR17_RF_CURR_STATE);
+ if (bbp_state == state && rf_state == state)
+ return 0;
+ rt2500usb_register_write(rt2x00dev, MAC_CSR17, reg);
+ msleep(30);
+ }
+
+ NOTICE(rt2x00dev, "Device failed to enter state %d, "
+ "current device state: bbp %d and rf %d.\n",
+ state, bbp_state, rf_state);
+
+ return -EBUSY;
+}
+
+static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ int retval = 0;
+
+ switch (state) {
+ case STATE_RADIO_ON:
+ retval = rt2500usb_enable_radio(rt2x00dev);
+ break;
+ case STATE_RADIO_OFF:
+ rt2500usb_disable_radio(rt2x00dev);
+ break;
+ case STATE_RADIO_RX_ON:
+ case STATE_RADIO_RX_OFF:
+ rt2500usb_toggle_rx(rt2x00dev, state);
+ break;
+ case STATE_DEEP_SLEEP:
+ case STATE_SLEEP:
+ case STATE_STANDBY:
+ case STATE_AWAKE:
+ retval = rt2500usb_set_state(rt2x00dev, state);
+ break;
+ default:
+ retval = -ENOTSUPP;
+ break;
+ }
+
+ return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+ struct data_desc *txd,
+ struct data_entry_desc *desc,
+ struct ieee80211_hdr *ieee80211hdr,
+ unsigned int length,
+ struct ieee80211_tx_control *control)
+{
+ u32 word;
+
+ /*
+ * Start writing the descriptor words.
+ */
+ rt2x00_desc_read(txd, 1, &word);
+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
+ rt2x00_set_field32(&word, TXD_W1_AIFS, desc->aifs);
+ rt2x00_set_field32(&word, TXD_W1_CWMIN, desc->cw_min);
+ rt2x00_set_field32(&word, TXD_W1_CWMAX, desc->cw_max);
+ rt2x00_desc_write(txd, 1, word);
+
+ rt2x00_desc_read(txd, 2, &word);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, desc->signal);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, desc->service);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, desc->length_low);
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, desc->length_high);
+ rt2x00_desc_write(txd, 2, word);
+
+ rt2x00_desc_read(txd, 0, &word);
+ rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, control->retry_limit);
+ rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
+ test_bit(ENTRY_TXD_MORE_FRAG, &desc->flags));
+ rt2x00_set_field32(&word, TXD_W0_ACK,
+ !(control->flags & IEEE80211_TXCTL_NO_ACK));
+ rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
+ test_bit(ENTRY_TXD_REQ_TIMESTAMP, &desc->flags));
+ rt2x00_set_field32(&word, TXD_W0_OFDM,
+ test_bit(ENTRY_TXD_OFDM_RATE, &desc->flags));
+ rt2x00_set_field32(&word, TXD_W0_NEW_SEQ,
+ !!(control->flags & IEEE80211_TXCTL_FIRST_FRAGMENT));
+ rt2x00_set_field32(&word, TXD_W0_IFS, desc->ifs);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, length);
+ rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
+ rt2x00_desc_write(txd, 0, word);
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+ unsigned int queue)
+{
+ u16 reg;
+
+ if (queue != IEEE80211_TX_QUEUE_BEACON)
+ return;
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR19, ®);
+ if (!rt2x00_get_field16(reg, TXRX_CSR19_BEACON_GEN)) {
+ rt2x00_set_field16(®, TXRX_CSR19_BEACON_GEN, 1);
+ /*
+ * Beacon generation will fail initially.
+ * To prevent this we need to register the TXRX_CSR19
+ * register several times.
+ */
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+ }
+}
+
+/*
+ * RX control handlers
+ */
+static int rt2500usb_fill_rxdone(struct data_entry *entry,
+ int *signal, int *rssi, int *ofdm, int *size)
+{
+ struct urb *urb = entry->priv;
+ struct data_desc *rxd = (struct data_desc *)(entry->skb->data +
+ (urb->actual_length -
+ entry->ring->desc_size));
+ u32 word0;
+ u32 word1;
+
+ rt2x00_desc_read(rxd, 0, &word0);
+ rt2x00_desc_read(rxd, 1, &word1);
+
+ if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR) ||
+ rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR) ||
+ rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
+ return -EINVAL;
+
+ /*
+ * Obtain the status about this packet.
+ */
+ *signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+ *rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
+ entry->ring->rt2x00dev->rssi_offset;
+ *ofdm = rt2x00_get_field32(word0, RXD_W0_OFDM);
+ *size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+
+ return 0;
+}
+
+/*
+ * Interrupt functions.
+ */
+static void rt2500usb_beacondone(struct urb *urb)
+{
+ struct data_entry *entry = (struct data_entry *)urb->context;
+ struct data_ring *ring = entry->ring;
+
+ if (!test_bit(DEVICE_ENABLED_RADIO, &ring->rt2x00dev->flags))
+ return;
+
+ /*
+ * Check if this was the guardian beacon,
+ * if that was the case we need to send the real beacon now.
+ * Otherwise we should free the sk_buffer, the device
+ * should be doing the rest of the work now.
+ */
+ if (ring->index == 1) {
+ rt2x00_ring_index_done_inc(ring);
+ entry = rt2x00_get_data_entry(ring);
+ usb_submit_urb(entry->priv, GFP_ATOMIC);
+ rt2x00_ring_index_inc(ring);
+ } else if (ring->index_done == 1) {
+ entry = rt2x00_get_data_entry_done(ring);
+ if (entry->skb) {
+ dev_kfree_skb(entry->skb);
+ entry->skb = NULL;
+ }
+ rt2x00_ring_index_done_inc(ring);
+ }
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ u16 word;
+ u8 *mac;
+
+ rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
+
+ /*
+ * Start validation of the data that has been read.
+ */
+ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+ if (!is_valid_ether_addr(mac)) {
+ random_ether_addr(mac);
+ EEPROM(rt2x00dev, "MAC: " MAC_FMT "\n", MAC_ARG(mac));
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT, 0);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT, 0);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE, 0);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
+ rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+ EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
+ rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+ EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
+ DEFAULT_RSSI_OFFSET);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
+ EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_THRESHOLD, 45);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE, word);
+ EEPROM(rt2x00dev, "BBPtune: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_VGC, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_VGCUPPER, 0x40);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_VGC, word);
+ EEPROM(rt2x00dev, "BBPtune vgc: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R17, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_LOW, 0x48);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R17_HIGH, 0x41);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R17, word);
+ EEPROM(rt2x00dev, "BBPtune r17: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R24, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_LOW, 0x40);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R24_HIGH, 0x80);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R24, word);
+ EEPROM(rt2x00dev, "BBPtune r24: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R25, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_LOW, 0x40);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R25_HIGH, 0x50);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R25, word);
+ EEPROM(rt2x00dev, "BBPtune r25: 0x%04x\n", word);
+ }
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_BBPTUNE_R61, &word);
+ if (word == 0xffff) {
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_LOW, 0x60);
+ rt2x00_set_field16(&word, EEPROM_BBPTUNE_R61_HIGH, 0x6d);
+ rt2x00_eeprom_write(rt2x00dev, EEPROM_BBPTUNE_R61, word);
+ EEPROM(rt2x00dev, "BBPtune r61: 0x%04x\n", word);
+ }
+
+ return 0;
+}
+
+static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+ u16 reg;
+ u16 value;
+ u16 eeprom;
+
+ /*
+ * Read EEPROM word for configuration.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+ /*
+ * Identify RF chipset.
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+ rt2500usb_register_read(rt2x00dev, MAC_CSR0, ®);
+ rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
+
+ if (rt2x00_rev(&rt2x00dev->chip, 0xffff0)) {
+ ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
+ return -ENODEV;
+ }
+
+ if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
+ !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Identify default antenna configuration.
+ */
+ rt2x00dev->hw->conf.antenna_sel_tx =
+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
+ rt2x00dev->hw->conf.antenna_sel_rx =
+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
+
+ /*
+ * Store led mode, for correct led behaviour.
+ */
+ rt2x00dev->led_mode =
+ rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
+
+ /*
+ * Check if the BBP tuning should be disabled.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
+ __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+
+ /*
+ * Read the RSSI <-> dBm offset information.
+ */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
+ rt2x00dev->rssi_offset =
+ rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
+
+ return 0;
+}
+
+/*
+ * RF value list for RF2522
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2522[] = {
+ { 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
+ { 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
+ { 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
+ { 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
+ { 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
+ { 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
+ { 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
+ { 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
+ { 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
+ { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
+ { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
+ { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
+ { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
+ { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
+};
+
+/*
+ * RF value list for RF2523
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2523[] = {
+ { 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
+ { 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
+ { 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
+ { 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
+ { 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
+ { 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
+ { 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
+ { 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
+ { 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
+ { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
+ { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
+ { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
+ { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
+ { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
+};
+
+/*
+ * RF value list for RF2524
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2524[] = {
+ { 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
+ { 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
+ { 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
+ { 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
+ { 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
+ { 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
+ { 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
+ { 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
+ { 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
+ { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
+ { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
+ { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
+ { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
+ { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
+};
+
+/*
+ * RF value list for RF2525
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2525[] = {
+ { 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
+ { 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
+ { 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
+ { 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
+ { 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
+ { 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
+ { 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
+ { 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
+ { 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
+ { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
+ { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
+ { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
+ { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
+ { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
+};
+
+/*
+ * RF value list for RF2525e
+ * Supports: 2.4 GHz
+ */
+static const struct rf_channel rf_vals_bg_2525e[] = {
+ { 1, 0x00022010, 0x0000089a, 0x00060111, 0x00000e1b },
+ { 2, 0x00022010, 0x0000089e, 0x00060111, 0x00000e07 },
+ { 3, 0x00022010, 0x0000089e, 0x00060111, 0x00000e1b },
+ { 4, 0x00022010, 0x000008a2, 0x00060111, 0x00000e07 },
+ { 5, 0x00022010, 0x000008a2, 0x00060111, 0x00000e1b },
+ { 6, 0x00022010, 0x000008a6, 0x00060111, 0x00000e07 },
+ { 7, 0x00022010, 0x000008a6, 0x00060111, 0x00000e1b },
+ { 8, 0x00022010, 0x000008aa, 0x00060111, 0x00000e07 },
+ { 9, 0x00022010, 0x000008aa, 0x00060111, 0x00000e1b },
+ { 10, 0x00022010, 0x000008ae, 0x00060111, 0x00000e07 },
+ { 11, 0x00022010, 0x000008ae, 0x00060111, 0x00000e1b },
+ { 12, 0x00022010, 0x000008b2, 0x00060111, 0x00000e07 },
+ { 13, 0x00022010, 0x000008b2, 0x00060111, 0x00000e1b },
+ { 14, 0x00022010, 0x000008b6, 0x00060111, 0x00000e23 },
+};
+
+/*
+ * RF value list for RF5222
+ * Supports: 2.4 GHz & 5.2 GHz
+ */
+static const struct rf_channel rf_vals_5222[] = {
+ { 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
+ { 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
+ { 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
+ { 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
+ { 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
+ { 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
+ { 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
+ { 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
+ { 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
+ { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
+ { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
+ { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
+ { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
+ { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
+
+ /* 802.11 UNI / HyperLan 2 */
+ { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
+ { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
+ { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
+ { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
+ { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
+ { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
+ { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
+ { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
+
+ /* 802.11 HyperLan 2 */
+ { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
+ { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
+ { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
+ { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
+ { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
+ { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
+ { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
+ { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
+ { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
+ { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
+
+ /* 802.11 UNII */
+ { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
+ { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
+ { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
+ { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
+ { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
+};
+
+static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+ struct hw_mode_spec *spec = &rt2x00dev->spec;
+ u8 *txpower;
+ unsigned int i;
+
+ /*
+ * Initialize all hw fields.
+ */
+ rt2x00dev->hw->flags =
+ IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
+ IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_MONITOR_DURING_OPER |
+ IEEE80211_HW_NO_PROBE_FILTERING;
+ rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
+ rt2x00dev->hw->max_signal = MAX_SIGNAL;
+ rt2x00dev->hw->max_rssi = MAX_RX_SSI;
+ rt2x00dev->hw->queues = 2;
+
+ SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
+ SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+ rt2x00_eeprom_addr(rt2x00dev,
+ EEPROM_MAC_ADDR_0));
+
+ /*
+ * Convert tx_power array in eeprom.
+ */
+ txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
+ for (i = 0; i < 14; i++)
+ txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
+
+ /*
+ * Initialize hw_mode information.
+ */
+ spec->num_modes = 2;
+ spec->num_rates = 12;
+ spec->tx_power_a = NULL;
+ spec->tx_power_bg = txpower;
+ spec->tx_power_default = DEFAULT_TXPOWER;
+
+ if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
+ spec->channels = rf_vals_bg_2522;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
+ spec->channels = rf_vals_bg_2523;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
+ spec->channels = rf_vals_bg_2524;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
+ spec->channels = rf_vals_bg_2525;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
+ spec->channels = rf_vals_bg_2525e;
+ } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_5222);
+ spec->channels = rf_vals_5222;
+ spec->num_modes = 3;
+ }
+}
+
+static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+ int retval;
+
+ /*
+ * Allocate eeprom data.
+ */
+ retval = rt2500usb_validate_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ retval = rt2500usb_init_eeprom(rt2x00dev);
+ if (retval)
+ return retval;
+
+ /*
+ * Initialize hw specifications.
+ */
+ rt2500usb_probe_hw_mode(rt2x00dev);
+
+ /*
+ * USB devices require scheduled packet filter toggling
+ *This device requires the beacon ring
+ */
+ __set_bit(PACKET_FILTER_SCHEDULED, &rt2x00dev->flags);
+ __set_bit(REQUIRE_BEACON_RING, &rt2x00dev->flags);
+
+ /*
+ * Set the rssi offset.
+ */
+ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+ return 0;
+}
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static int rt2500usb_beacon_update(struct ieee80211_hw *hw,
+ struct sk_buff *skb,
+ struct ieee80211_tx_control *control)
+{
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ struct usb_device *usb_dev =
+ interface_to_usbdev(rt2x00dev_usb(rt2x00dev));
+ struct data_ring *ring =
+ rt2x00lib_get_ring(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+ struct data_entry *beacon;
+ struct data_entry *guardian;
+ int length;
+
+ /*
+ * Just in case the ieee80211 doesn't set this,
+ * but we need this queue set for the descriptor
+ * initialization.
+ */
+ control->queue = IEEE80211_TX_QUEUE_BEACON;
+
+ /*
+ * Obtain 2 entries, one for the guardian byte,
+ * the second for the actual beacon.
+ */
+ guardian = rt2x00_get_data_entry(ring);
+ rt2x00_ring_index_inc(ring);
+ beacon = rt2x00_get_data_entry(ring);
+
+ /*
+ * First we create the beacon.
+ */
+ skb_push(skb, ring->desc_size);
+ rt2x00lib_write_tx_desc(rt2x00dev, (struct data_desc *)skb->data,
+ (struct ieee80211_hdr *)(skb->data +
+ ring->desc_size),
+ skb->len - ring->desc_size, control);
+
+ /*
+ * Length passed to usb_fill_urb cannot be an odd number,
+ * so add 1 byte to make it even.
+ */
+ length = skb->len;
+ if (length % 2)
+ length++;
+
+ usb_fill_bulk_urb(beacon->priv, usb_dev,
+ usb_sndbulkpipe(usb_dev, 1),
+ skb->data, length, rt2500usb_beacondone, beacon);
+
+ beacon->skb = skb;
+
+ /*
+ * Second we need to create the guardian byte.
+ * We only need a single byte, so lets recycle
+ * the 'flags' field we are not using for beacons.
+ */
+ guardian->flags = 0;
+ usb_fill_bulk_urb(guardian->priv, usb_dev,
+ usb_sndbulkpipe(usb_dev, 1),
+ &guardian->flags, 1, rt2500usb_beacondone, guardian);
+
+ /*
+ * Send out the guardian byte.
+ */
+ usb_submit_urb(guardian->priv, GFP_ATOMIC);
+
+ /*
+ * Enable beacon generation.
+ */
+ rt2500usb_kick_tx_queue(rt2x00dev, IEEE80211_TX_QUEUE_BEACON);
+
+ return 0;
+}
+
+static const struct ieee80211_ops rt2500usb_mac80211_ops = {
+ .tx = rt2x00mac_tx,
+ .add_interface = rt2x00mac_add_interface,
+ .remove_interface = rt2x00mac_remove_interface,
+ .config = rt2x00mac_config,
+ .config_interface = rt2x00mac_config_interface,
+ .set_multicast_list = rt2x00mac_set_multicast_list,
+ .get_stats = rt2x00mac_get_stats,
+ .conf_tx = rt2x00mac_conf_tx,
+ .get_tx_stats = rt2x00mac_get_tx_stats,
+ .beacon_update = rt2500usb_beacon_update,
+};
+
+static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
+ .probe_hw = rt2500usb_probe_hw,
+ .initialize = rt2x00usb_initialize,
+ .uninitialize = rt2x00usb_uninitialize,
+ .set_device_state = rt2500usb_set_device_state,
+ .link_stats = rt2500usb_link_stats,
+ .reset_tuner = rt2500usb_reset_tuner,
+ .link_tuner = rt2500usb_link_tuner,
+ .write_tx_desc = rt2500usb_write_tx_desc,
+ .write_tx_data = rt2x00usb_write_tx_data,
+ .kick_tx_queue = rt2500usb_kick_tx_queue,
+ .fill_rxdone = rt2500usb_fill_rxdone,
+ .config_mac_addr = rt2500usb_config_mac_addr,
+ .config_bssid = rt2500usb_config_bssid,
+ .config_packet_filter = rt2500usb_config_packet_filter,
+ .config_type = rt2500usb_config_type,
+ .config = rt2500usb_config,
+};
+
+static const struct rt2x00_ops rt2500usb_ops = {
+ .name = DRV_NAME,
+ .rxd_size = RXD_DESC_SIZE,
+ .txd_size = TXD_DESC_SIZE,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .lib = &rt2500usb_rt2x00_ops,
+ .hw = &rt2500usb_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+ .debugfs = &rt2500usb_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * rt2500usb module information.
+ */
+static struct usb_device_id rt2500usb_device_table[] = {
+ /* ASUS */
+ { USB_DEVICE(0x0b05, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0b05, 0x1707), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Belkin */
+ { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x050d, 0x7051), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Cisco Systems */
+ { USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Conceptronic */
+ { USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* D-LINK */
+ { USB_DEVICE(0x2001, 0x3c00), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Gigabyte */
+ { USB_DEVICE(0x1044, 0x8001), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x1044, 0x8007), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Hercules */
+ { USB_DEVICE(0x06f8, 0xe000), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Melco */
+ { USB_DEVICE(0x0411, 0x0066), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0411, 0x0067), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0411, 0x008b), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0411, 0x0097), USB_DEVICE_DATA(&rt2500usb_ops) },
+
+ /* MSI */
+ { USB_DEVICE(0x0db0, 0x6861), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0db0, 0x6865), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x0db0, 0x6869), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Ralink */
+ { USB_DEVICE(0x148f, 0x1706), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Siemens */
+ { USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* SMC */
+ { USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Spairon */
+ { USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Trust */
+ { USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+ /* Zinwell */
+ { USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
+ { 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2500 USB Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2570 USB chipset based cards");
+MODULE_DEVICE_TABLE(usb, rt2500usb_device_table);
+MODULE_LICENSE("GPL");
+
+static struct usb_driver rt2500usb_driver = {
+ .name = DRV_NAME,
+ .id_table = rt2500usb_device_table,
+ .probe = rt2x00usb_probe,
+ .disconnect = rt2x00usb_disconnect,
+ .suspend = rt2x00usb_suspend,
+ .resume = rt2x00usb_resume,
+};
+
+static int __init rt2500usb_init(void)
+{
+ return usb_register(&rt2500usb_driver);
+}
+
+static void __exit rt2500usb_exit(void)
+{
+ usb_deregister(&rt2500usb_driver);
+}
+
+module_init(rt2500usb_init);
+module_exit(rt2500usb_exit);