| /* Virtio ring implementation. |
| * |
| * Copyright 2007 Rusty Russell IBM Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include <linux/virtio.h> |
| #include <linux/virtio_ring.h> |
| #include <linux/virtio_config.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| |
| /* virtio guest is communicating with a virtual "device" that actually runs on |
| * a host processor. Memory barriers are used to control SMP effects. */ |
| #ifdef CONFIG_SMP |
| /* Where possible, use SMP barriers which are more lightweight than mandatory |
| * barriers, because mandatory barriers control MMIO effects on accesses |
| * through relaxed memory I/O windows (which virtio does not use). */ |
| #define virtio_mb() smp_mb() |
| #define virtio_rmb() smp_rmb() |
| #define virtio_wmb() smp_wmb() |
| #else |
| /* We must force memory ordering even if guest is UP since host could be |
| * running on another CPU, but SMP barriers are defined to barrier() in that |
| * configuration. So fall back to mandatory barriers instead. */ |
| #define virtio_mb() mb() |
| #define virtio_rmb() rmb() |
| #define virtio_wmb() wmb() |
| #endif |
| |
| #ifdef DEBUG |
| /* For development, we want to crash whenever the ring is screwed. */ |
| #define BAD_RING(_vq, fmt, args...) \ |
| do { \ |
| dev_err(&(_vq)->vq.vdev->dev, \ |
| "%s:"fmt, (_vq)->vq.name, ##args); \ |
| BUG(); \ |
| } while (0) |
| /* Caller is supposed to guarantee no reentry. */ |
| #define START_USE(_vq) \ |
| do { \ |
| if ((_vq)->in_use) \ |
| panic("%s:in_use = %i\n", \ |
| (_vq)->vq.name, (_vq)->in_use); \ |
| (_vq)->in_use = __LINE__; \ |
| } while (0) |
| #define END_USE(_vq) \ |
| do { BUG_ON(!(_vq)->in_use); (_vq)->in_use = 0; } while(0) |
| #else |
| #define BAD_RING(_vq, fmt, args...) \ |
| do { \ |
| dev_err(&_vq->vq.vdev->dev, \ |
| "%s:"fmt, (_vq)->vq.name, ##args); \ |
| (_vq)->broken = true; \ |
| } while (0) |
| #define START_USE(vq) |
| #define END_USE(vq) |
| #endif |
| |
| struct vring_virtqueue |
| { |
| struct virtqueue vq; |
| |
| /* Actual memory layout for this queue */ |
| struct vring vring; |
| |
| /* Other side has made a mess, don't try any more. */ |
| bool broken; |
| |
| /* Host supports indirect buffers */ |
| bool indirect; |
| |
| /* Number of free buffers */ |
| unsigned int num_free; |
| /* Head of free buffer list. */ |
| unsigned int free_head; |
| /* Number we've added since last sync. */ |
| unsigned int num_added; |
| |
| /* Last used index we've seen. */ |
| u16 last_used_idx; |
| |
| /* How to notify other side. FIXME: commonalize hcalls! */ |
| void (*notify)(struct virtqueue *vq); |
| |
| #ifdef DEBUG |
| /* They're supposed to lock for us. */ |
| unsigned int in_use; |
| #endif |
| |
| /* Tokens for callbacks. */ |
| void *data[]; |
| }; |
| |
| #define to_vvq(_vq) container_of(_vq, struct vring_virtqueue, vq) |
| |
| /* Set up an indirect table of descriptors and add it to the queue. */ |
| static int vring_add_indirect(struct vring_virtqueue *vq, |
| struct scatterlist sg[], |
| unsigned int out, |
| unsigned int in, |
| gfp_t gfp) |
| { |
| struct vring_desc *desc; |
| unsigned head; |
| int i; |
| |
| desc = kmalloc((out + in) * sizeof(struct vring_desc), gfp); |
| if (!desc) |
| return -ENOMEM; |
| |
| /* Transfer entries from the sg list into the indirect page */ |
| for (i = 0; i < out; i++) { |
| desc[i].flags = VRING_DESC_F_NEXT; |
| desc[i].addr = sg_phys(sg); |
| desc[i].len = sg->length; |
| desc[i].next = i+1; |
| sg++; |
| } |
| for (; i < (out + in); i++) { |
| desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE; |
| desc[i].addr = sg_phys(sg); |
| desc[i].len = sg->length; |
| desc[i].next = i+1; |
| sg++; |
| } |
| |
| /* Last one doesn't continue. */ |
| desc[i-1].flags &= ~VRING_DESC_F_NEXT; |
| desc[i-1].next = 0; |
| |
| /* We're about to use a buffer */ |
| vq->num_free--; |
| |
| /* Use a single buffer which doesn't continue */ |
| head = vq->free_head; |
| vq->vring.desc[head].flags = VRING_DESC_F_INDIRECT; |
| vq->vring.desc[head].addr = virt_to_phys(desc); |
| vq->vring.desc[head].len = i * sizeof(struct vring_desc); |
| |
| /* Update free pointer */ |
| vq->free_head = vq->vring.desc[head].next; |
| |
| return head; |
| } |
| |
| int virtqueue_add_buf_gfp(struct virtqueue *_vq, |
| struct scatterlist sg[], |
| unsigned int out, |
| unsigned int in, |
| void *data, |
| gfp_t gfp) |
| { |
| struct vring_virtqueue *vq = to_vvq(_vq); |
| unsigned int i, avail, head, uninitialized_var(prev); |
| |
| START_USE(vq); |
| |
| BUG_ON(data == NULL); |
| |
| /* If the host supports indirect descriptor tables, and we have multiple |
| * buffers, then go indirect. FIXME: tune this threshold */ |
| if (vq->indirect && (out + in) > 1 && vq->num_free) { |
| head = vring_add_indirect(vq, sg, out, in, gfp); |
| if (head != vq->vring.num) |
| goto add_head; |
| } |
| |
| BUG_ON(out + in > vq->vring.num); |
| BUG_ON(out + in == 0); |
| |
| if (vq->num_free < out + in) { |
| pr_debug("Can't add buf len %i - avail = %i\n", |
| out + in, vq->num_free); |
| /* FIXME: for historical reasons, we force a notify here if |
| * there are outgoing parts to the buffer. Presumably the |
| * host should service the ring ASAP. */ |
| if (out) |
| vq->notify(&vq->vq); |
| END_USE(vq); |
| return -ENOSPC; |
| } |
| |
| /* We're about to use some buffers from the free list. */ |
| vq->num_free -= out + in; |
| |
| head = vq->free_head; |
| for (i = vq->free_head; out; i = vq->vring.desc[i].next, out--) { |
| vq->vring.desc[i].flags = VRING_DESC_F_NEXT; |
| vq->vring.desc[i].addr = sg_phys(sg); |
| vq->vring.desc[i].len = sg->length; |
| prev = i; |
| sg++; |
| } |
| for (; in; i = vq->vring.desc[i].next, in--) { |
| vq->vring.desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE; |
| vq->vring.desc[i].addr = sg_phys(sg); |
| vq->vring.desc[i].len = sg->length; |
| prev = i; |
| sg++; |
| } |
| /* Last one doesn't continue. */ |
| vq->vring.desc[prev].flags &= ~VRING_DESC_F_NEXT; |
| |
| /* Update free pointer */ |
| vq->free_head = i; |
| |
| add_head: |
| /* Set token. */ |
| vq->data[head] = data; |
| |
| /* Put entry in available array (but don't update avail->idx until they |
| * do sync). FIXME: avoid modulus here? */ |
| avail = (vq->vring.avail->idx + vq->num_added++) % vq->vring.num; |
| vq->vring.avail->ring[avail] = head; |
| |
| pr_debug("Added buffer head %i to %p\n", head, vq); |
| END_USE(vq); |
| |
| /* If we're indirect, we can fit many (assuming not OOM). */ |
| if (vq->indirect) |
| return vq->num_free ? vq->vring.num : 0; |
| return vq->num_free; |
| } |
| EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp); |
| |
| void virtqueue_kick(struct virtqueue *_vq) |
| { |
| struct vring_virtqueue *vq = to_vvq(_vq); |
| START_USE(vq); |
| /* Descriptors and available array need to be set before we expose the |
| * new available array entries. */ |
| virtio_wmb(); |
| |
| vq->vring.avail->idx += vq->num_added; |
| vq->num_added = 0; |
| |
| /* Need to update avail index before checking if we should notify */ |
| virtio_mb(); |
| |
| if (!(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY)) |
| /* Prod other side to tell it about changes. */ |
| vq->notify(&vq->vq); |
| |
| END_USE(vq); |
| } |
| EXPORT_SYMBOL_GPL(virtqueue_kick); |
| |
| static void detach_buf(struct vring_virtqueue *vq, unsigned int head) |
| { |
| unsigned int i; |
| |
| /* Clear data ptr. */ |
| vq->data[head] = NULL; |
| |
| /* Put back on free list: find end */ |
| i = head; |
| |
| /* Free the indirect table */ |
| if (vq->vring.desc[i].flags & VRING_DESC_F_INDIRECT) |
| kfree(phys_to_virt(vq->vring.desc[i].addr)); |
| |
| while (vq->vring.desc[i].flags & VRING_DESC_F_NEXT) { |
| i = vq->vring.desc[i].next; |
| vq->num_free++; |
| } |
| |
| vq->vring.desc[i].next = vq->free_head; |
| vq->free_head = head; |
| /* Plus final descriptor */ |
| vq->num_free++; |
| } |
| |
| static inline bool more_used(const struct vring_virtqueue *vq) |
| { |
| return vq->last_used_idx != vq->vring.used->idx; |
| } |
| |
| void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) |
| { |
| struct vring_virtqueue *vq = to_vvq(_vq); |
| void *ret; |
| unsigned int i; |
| |
| START_USE(vq); |
| |
| if (unlikely(vq->broken)) { |
| END_USE(vq); |
| return NULL; |
| } |
| |
| if (!more_used(vq)) { |
| pr_debug("No more buffers in queue\n"); |
| END_USE(vq); |
| return NULL; |
| } |
| |
| /* Only get used array entries after they have been exposed by host. */ |
| virtio_rmb(); |
| |
| i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id; |
| *len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len; |
| |
| if (unlikely(i >= vq->vring.num)) { |
| BAD_RING(vq, "id %u out of range\n", i); |
| return NULL; |
| } |
| if (unlikely(!vq->data[i])) { |
| BAD_RING(vq, "id %u is not a head!\n", i); |
| return NULL; |
| } |
| |
| /* detach_buf clears data, so grab it now. */ |
| ret = vq->data[i]; |
| detach_buf(vq, i); |
| vq->last_used_idx++; |
| END_USE(vq); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(virtqueue_get_buf); |
| |
| void virtqueue_disable_cb(struct virtqueue *_vq) |
| { |
| struct vring_virtqueue *vq = to_vvq(_vq); |
| |
| vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT; |
| } |
| EXPORT_SYMBOL_GPL(virtqueue_disable_cb); |
| |
| bool virtqueue_enable_cb(struct virtqueue *_vq) |
| { |
| struct vring_virtqueue *vq = to_vvq(_vq); |
| |
| START_USE(vq); |
| |
| /* We optimistically turn back on interrupts, then check if there was |
| * more to do. */ |
| vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT; |
| virtio_mb(); |
| if (unlikely(more_used(vq))) { |
| END_USE(vq); |
| return false; |
| } |
| |
| END_USE(vq); |
| return true; |
| } |
| EXPORT_SYMBOL_GPL(virtqueue_enable_cb); |
| |
| void *virtqueue_detach_unused_buf(struct virtqueue *_vq) |
| { |
| struct vring_virtqueue *vq = to_vvq(_vq); |
| unsigned int i; |
| void *buf; |
| |
| START_USE(vq); |
| |
| for (i = 0; i < vq->vring.num; i++) { |
| if (!vq->data[i]) |
| continue; |
| /* detach_buf clears data, so grab it now. */ |
| buf = vq->data[i]; |
| detach_buf(vq, i); |
| END_USE(vq); |
| return buf; |
| } |
| /* That should have freed everything. */ |
| BUG_ON(vq->num_free != vq->vring.num); |
| |
| END_USE(vq); |
| return NULL; |
| } |
| EXPORT_SYMBOL_GPL(virtqueue_detach_unused_buf); |
| |
| irqreturn_t vring_interrupt(int irq, void *_vq) |
| { |
| struct vring_virtqueue *vq = to_vvq(_vq); |
| |
| if (!more_used(vq)) { |
| pr_debug("virtqueue interrupt with no work for %p\n", vq); |
| return IRQ_NONE; |
| } |
| |
| if (unlikely(vq->broken)) |
| return IRQ_HANDLED; |
| |
| pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback); |
| if (vq->vq.callback) |
| vq->vq.callback(&vq->vq); |
| |
| return IRQ_HANDLED; |
| } |
| EXPORT_SYMBOL_GPL(vring_interrupt); |
| |
| struct virtqueue *vring_new_virtqueue(unsigned int num, |
| unsigned int vring_align, |
| struct virtio_device *vdev, |
| void *pages, |
| void (*notify)(struct virtqueue *), |
| void (*callback)(struct virtqueue *), |
| const char *name) |
| { |
| struct vring_virtqueue *vq; |
| unsigned int i; |
| |
| /* We assume num is a power of 2. */ |
| if (num & (num - 1)) { |
| dev_warn(&vdev->dev, "Bad virtqueue length %u\n", num); |
| return NULL; |
| } |
| |
| vq = kmalloc(sizeof(*vq) + sizeof(void *)*num, GFP_KERNEL); |
| if (!vq) |
| return NULL; |
| |
| vring_init(&vq->vring, num, pages, vring_align); |
| vq->vq.callback = callback; |
| vq->vq.vdev = vdev; |
| vq->vq.name = name; |
| vq->notify = notify; |
| vq->broken = false; |
| vq->last_used_idx = 0; |
| vq->num_added = 0; |
| list_add_tail(&vq->vq.list, &vdev->vqs); |
| #ifdef DEBUG |
| vq->in_use = false; |
| #endif |
| |
| vq->indirect = virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC); |
| |
| /* No callback? Tell other side not to bother us. */ |
| if (!callback) |
| vq->vring.avail->flags |= VRING_AVAIL_F_NO_INTERRUPT; |
| |
| /* Put everything in free lists. */ |
| vq->num_free = num; |
| vq->free_head = 0; |
| for (i = 0; i < num-1; i++) { |
| vq->vring.desc[i].next = i+1; |
| vq->data[i] = NULL; |
| } |
| vq->data[i] = NULL; |
| |
| return &vq->vq; |
| } |
| EXPORT_SYMBOL_GPL(vring_new_virtqueue); |
| |
| void vring_del_virtqueue(struct virtqueue *vq) |
| { |
| list_del(&vq->list); |
| kfree(to_vvq(vq)); |
| } |
| EXPORT_SYMBOL_GPL(vring_del_virtqueue); |
| |
| /* Manipulates transport-specific feature bits. */ |
| void vring_transport_features(struct virtio_device *vdev) |
| { |
| unsigned int i; |
| |
| for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) { |
| switch (i) { |
| case VIRTIO_RING_F_INDIRECT_DESC: |
| break; |
| default: |
| /* We don't understand this bit. */ |
| clear_bit(i, vdev->features); |
| } |
| } |
| } |
| EXPORT_SYMBOL_GPL(vring_transport_features); |
| |
| MODULE_LICENSE("GPL"); |